Upload
lekhanh
View
229
Download
5
Embed Size (px)
Citation preview
■ Machine Model Selection Chart ■ Heavy-Duty Cutting■ Large Diameter WorkP.3
P.3
P.5P.11
Spindle Motor Diagram
Specification According to Spindle Type※ Further information is please make an inquiry to Takisawa sales persons.
P.3
P.6
P.9
P.7
P.8
P.11
P.13
21 *The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.
Turning Capability In This Class Of Machine
Most Powerful Applicable To Large Diameter And Long WorkpiecesApplicable to industry fields related to wind power generation, energy,earth excavation, ships, vehicles, and power machinery
Large Diameter Spindle-Through Hole Variation
Spindle Type
D :φ375mm
C :φ275mm
B :φ182mm
A :φ131mm
14.76in
10.83in
7.17in
5.16in
Turret TypeMax. Turning
Diameter
Turning Turret
8-Station(T8)
φ760mm29.92in
10-Station(T10)
φ760mm29.92in
12-Station(T12)
φ730mm28.74in
Turning & Milling Turret
12-Station(T12M)
φ750mm29.53in
Photo shows CNC turning center TG-6020CM
equipped with the turning & milling turret (T12M).
・ Eco-friendly inverter type hydraulic unit saves electric power.
・ Application of regenerative energy system helps generated energy return to the power supply when the motor is decelerating, saving power consumption.
・ Internal lighting shutoff function reduces standby power.
・ Control panel cooling design takes natural radiation amount into account to reduce electric power.
・ Coolant pump runs only when coolant is being used, reducing electric power.
・ Use of oil-water separator extends the coolant life.
・ Application of LED lights saves energy consumption.
■ Eco-friendly Machine
Feature of
Original Software
Tooling System
Machine Spec.
NC Unit Spec.
Machine Dimensions
Interference and Travel Range
Movable Operation Panel
Improves The Operability
And Accessibility
43 *The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.
Four types of powerful turrets are available.
Powerful Turret For Heavy-Duty Cutting Of Steel
① Turning Turret : 8-Station (T8) /10-Station (T10) /12-Station (T12)
② Turning & Milling Turret : 12-Station (T12M)
Turning Turning & Milling
T8 T10 T12 T12MMax. Turning Diameter
(mm inch)760 29.92" 730 28.74" 750 29.53"
Standard Turning Diameter (mm inch)
60023.6"
47418.6"
39615.6"
39215.4"
Facing Tool Shank Height (mm inch)
□32 1.25" □32 1.25"
Boring Bar Shank Diameter (mm inch)
φ60 (OP. 80, 100)2.25" (OP. 3.0", 4.0")
φ60 2.25"
φ60 2.25"
Max. Rotary Tool Shank Diameter (mm inch)
- φ34 1.25"
Heavy-Duty Cutting Chuck Size : 15”~ 24”
Most powerful
11kW milling motor mounted. Max.3000min-1
Spindle Type Spindle NoseBearing Inside
Diameter (mm inch)Spindle-Through Hole Diameter (mm inch)
A A2-11 180 7.09" 131 5.16"
B A2-15 260 10.24" 182 7.17"
C A2-20 371 14.61" 275 10.83"
D A2-20 489 19.25" 375 14.76"
Highly Rigid Headstock For Heavy-Duty CuttingLarge Diameter Work
Large Diameter Front Hollow Air Chuck (Optional) Suitable For Pipe Machining
TypeUBR450K/P UBR560K/P UBR710K/P
UB450K/P UB560K/P UB710K/P
Through Hole Diameter
181 7.13" 275 10.83" 375 14.76"
(Upper Row Of Model Is For Long Stroke Type)Hydraulic Chuck (Optional) Large Diameter Front Hollow Air Chuck
(Optional)
・ 15"-24"chuck mountable, powerful spindle.
・ Performs powerful and stable cutting with large diameter works.
・ Front hollow air chuck (optional) suitable for pipe machining.
Machining AbilityOD Heavy-Duty Cutting Workpiece Material : S45C
Depth Of Cut : 12mm 0.47in
Feedrate : 0.8mm/rev 0.03in/rev
Cutting Speed : 150m/min 5905.51in/min
Spindle Load : 129%
Grooving Workpiece Material : S45C
Tip Width : 12mm 0.47in
Feedrate : 0.2mm/rev 0.01in/rev
Cutting Speed : 100m/min 3937.01in/min
Spindle Load : 28%
U-Drill Workpiece Material : S45C
Drill Diameter : 56mm 2.2in
Feedrate : 0.3mm/rev 0.01in/rev
Cutting Speed : 160m/min 6299.21in/min
Spindle Load : 100%
Chip Removal Rate : 671.7ml/min
Tapping Workpiece Material : S45C
Rotating Tool Spindle Speed : 141min-1
Feedrate : 423mm/min 16.65in/min
Cutting Speed : 12m/min 472.44in/min
Spindle Load : 120%
(M27×3)
・ Tailstock quill diameter φ180mm, MT. No.6 is standard.
・ Built-in hydraulic tailstock (MT. No.5) is optionally available.
・ Tailstock can move easily by being towed by saddle.
・ Tailstock can also clamp, un-clamp or move by program.
Highly Rigid Tailstock For Heavy-Duty Cutting Of ShaftsPowerful Hydraulic Tailstock Auto Traction System
Steep slope
allows chips to
fall freely.
Slant Bed Structurefor improved chip disposal
Supporting Long Boring Bar A space is provided above the spindle to allow a long boring bar to be used.
Max. Protrusive Length : 720mm 28.35inch
Lubricant Recovery Box (Standard)Highly Reliable Rectangular Slideways Are Used In All AxesOptimum wide slideway provides powerful and stable heavy-duty
cutting performance and high durability.
Lubricant mixing in water soluble
coolant is separated, and only the
coolant is returned to the coolant
tank.
【Standard Type】
8.4" Color : 0i-TD
【Tiwap-1 Type】
10.4" Color : 32i-A
■ Tooling System
65 Tooling System
Highly Efficient Turning Realized
Highly Efficient Spindle MotorSpindle Type
Spindle-Through Hole Diameter
Spindle Speed [Standard]
A φ131mm 5.16in 1200min-1 (OP. 2000min-1)
B φ182mm 7.17in 1000min-1
C φ275mm 10.83in 750min-1
D φ375mm 14.76in 500min-1
High power 37/30kW spindle motor mounted.
Offering most powerful cutting performance in this
class of machine !
*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.
Turning
T8/T10/T12
■ Machine Dimensions Dimensions is front door cover AB type, [CD type].
Turning & Milling
T12M
TG-6010
TG-6020
TG-6030
87 Interference and Travel Range Machine Dimensions*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.
Turning
T10
Turning
T12Turning & Milling
T12M
Turning
T8
Unit : mm inch Unit : mm inch■ Interference and Travel Range
T8 T10 T12① 85 3.35" 70 2.76"
② 430 16.93" 415 16.34"
③ 730 28.74" 760 29.92"
109 Tiwap-1 Network*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.
■ Network
Takisawa Original Software
Perfect Dialogue Program Processor
【Folder Display for all Process】 All the Process can be checked on the screen.
【Elaborate Process display function】 It helps check the Cutting data on Screen.
Easy to See
By just inserting Cutting data on each process Tag, the Process can be completed.
In Input window for arbitrary shape, Intersection Point will be calculated automatically.
Suitable Cutting Data can be selected from reference Data Bank
TAG
Easy to Use
}
Menu Selection such as Process, Data selection can be easily done with minimum input due to Takisawa Standard initial Data (Tooling Data & Cutting Parameter)
Example) In case Selection for Process, only to press Numeric Key "5"
Speed Up
Machining SimulationMachining Program can be checked by "3D Animation" or "Tool Tracking".
Complete Support
Tiwap-1 isProgramming Machining Simulation Automatic Operation
「Tooling Data & Cutting Parameter」Depending on the Combination of work piece and Insert Material, Cutting Parameter (Cutting Speed, Feed rate ,depth of cut) will be decided automatically and suggest to the operator. This will assist the operator greatly in set-up.
During preparing Program, "Reliable Guide Function" provides support
Due to availability of guiding Figures & Icons, it is easy even for beginners. Even in case of complicated Shapes , by using symbolic soft key on exclusive window. It is easy to input data.
“Reliable Guide Function” Selects only the required Process & Process Tags and arranges in the most appropriate sequence.
Takisawa original "Process expansions, folder function" and easy understandable icon will help higher visibility. Operator friendly, easily understandable main screen has been established.
In case of new work piece Programming, number of input Items are much less due to automatic cutting data setting.
■ Machine Standard Accessories (T8、 A-Spindle)
Boring Bar/Drill Holder (φ60, 3 Pieces)
Facing Holder (1 Piece)
Boring Bar Bush (3 Pieces)
Front Door Interlock
Chuck Open/Close Footswitch
Coolant Unit (520W, 1 Unit)
Lubricant Recovery Box *4
Chip Conveyor
Hydraulic Tailstock
Lighting Apparatus
Working Tool Set
Instruction Manual
■ Optional Accessories *5
Hydraulic Chuck
Special Chuck
Large Diameter Front Hollow Air Chuck
Chuck Open/Close M-Function
Sitting Confirmation
Airblow (Outside Spindle, with M-Function)
Spindle Through Airblow
Spindle Through Coolant
Spindle Above Coolant
Spindle Inner Stopper
Boring Bar/Drill Holder
Facing Holder
U-Drill Holder
Boring Bar Bush
U-Drill Socket
MT Socket
Work Pusher
Work Stopper
Rotary Tool Holder (X-Axis Milling)
Rotary Tool Holder (X-Axis Face Mill)
Rotary Tool Holder (Z-Axis Milling)
Milling Collet
Tapping Collet
Tool Setter
Rotary Beacon Light (Various Types)
Cubic Signal Light (3-Color)
Signal Tower Light (3-Color)
Auto Door (L10:Left Open, L20/L30:Double Doors)
Add Coolant Pump (520W)
Chip Bucket
Auto Power Gating System
Circuit Breaker
100V Outlet (Single Socket, Capacity 1A)
Sub-Control Box
Robot Interface (16 Inputs & Outputs)
Filler Tube (Various Types)
RAKU-RAKU Monitor 3
Measurement Monitor 3 *6
RS-232C Cable
User Special Color
Built-In Hydraulic Tailstock
Rolling Center MT.6
Tailstock M-Code
Steady Rests
Follow Rests
[Red] is optional.
Machine Specifications
*1) There is 2000min-1 type (Optional).
*2) 80 and 100 cannot be attached to the T12.
*3) Front Door Cover 「CD Type」
*4) Lubricant mixing in water soluble coolant is separated, and only the coolant is returned to the coolant tank.
The lubricant collected in the lubricant recovery box must be drained periodically.
*5) The specifications of optional accessories very depending on the model, thus requiring a separate discussion.
*6) The Measurement Monitor 3 is an optional function of the RAKU-RAKU Monitor 3.
Specifications・Contents
Spindle Type
Standard Optional
A B C DFront Door Cover AB Type [CD Type] AB Type [CD Type] CD Type CD Type
Swing Over Bed mm inch 830 32.86" [1050 41.34"]*3 830 32.86" [1050 41.34"]*3 1050 41.34" 1050 41.34"
Swing Over Cross Slide, Maximum Swing mm inch 830 32.86" [880 34.65"]*3 830 32.86" [880 34.65"]*3 880 34.65" 880 34.65"
Spindle-Through Hole Diameter mm inch 131 5.16" 182 7.17" 275 10.83" 375 14.76"
Bearing Inside Diameter mm inch 180 7.09" 260 10.24" 371 14.61" 489 19.25"
Bar Capacity mm inch 130 5.12" 181 7.13" 274 10.79" 374 14.72"
Spindle Nose (Nom,Code) A2-11 A2-15 A2-20 A2-20
Spindle Speed min-1 1200 [2000] 1000 750 500
Spindle Shifting Range Steps 3 2 2 2
■ Specification According to Spindle Type
Specifications・ContentsTG-6010 TG-6020 TG-6030
T8 T10 T12 T12M T8 T10 T12 T12M T8 T10 T12 T12M
Capability ・Capacity
Maximum Swing mm inch 830 32.83"(AB), 880 34.65"(CD) 830 32.83"(AB), 880 34.65"(CD) 830 32.83"(AB), 880 34.65"(CD)
Standard Turning Diameter mm inch 600 23.62" 474 18.66" 396 12.59" 392 15.43" 600 23.62" 474 18.66" 396 12.59" 392 15.43" 600 23.62" 474 18.66" 396 12.59" 392 15.43"
Maximum Turning Diameter mm inch 760 29.92" 760 29.92" 730 28.74" 750 29.53" 760 29.92" 760 29.92" 730 28.74" 750 29.53" 760 29.92" 760 29.92" 730 28.74" 750 29.53"
Maximum Turning Length mm inch 1031 40.59" 2031 79.96" 3031 119.33"
Bar Capacitymm inch
130(A), 181(B), 274(C), 374(D) 5.12"(A), 7.13"(B), 10.79"(C), 14.72"(D)
130(A), 181(B), 274(C), 374(D) 5.12"(A), 7.13"(B), 10.79"(C), 14.72"(D)
130(A), 181(B), 274(C), 374(D) 5.12"(A), 7.13"(B), 10.79"(C), 14.72"(D)
TravelX-Axis Travel mm inch 410 16.14" 410 16.14" 410 16.14"
Z-Axis Travel mm inch 1100 43.31" 2100 82.68" 3100 122.05"
Spindle
Spindle Speed min-1 1200(A)*1, 1000(B), 750(C), 500(D) 1200(A)*1, 1000(B), 750(C), 500(D) 1200(A)*1, 1000(B), 750(C), 500(D)
Minimum Index Angle deg. - 0.001 - 0.001 - 0.001
Spindle Nose (Nom,Code) A2-11(A), A2-15(B), A2-20(C,D) A2-11(A), A2-15(B), A2-20(C,D) A2-11(A), A2-15(B), A2-20(C,D)
Spindle-Through Hole Diametermm inch
131(A), 182(B), 275(C), 375(D) 5.16"(A), 7.17"(B), 10.83"(C), 14.76"(D)
131(A), 182(B), 275(C), 375(D) 5.16"(A), 7.17"(B), 10.83"(C), 14.76"(D)
131(A), 182(B), 275(C), 375(D) 5.16"(A), 7.17"(B), 10.83"(C), 14.76"(D)
Bearing Inside Diametermm inch
180(A), 260(B), 371(C), 489(D) 7.09"(A), 10.24"(B), 14.61"(C), 19.25"(D)
180(A), 260(B), 371(C), 489(D) 7.09"(A), 10.24"(B), 14.61"(C), 19.25"(D)
180(A), 260(B), 371(C), 489(D) 7.09"(A), 10.24"(B), 14.61"(C), 19.25"(D)
Turret
Turret Type Direct-Mount Type Direct-Mount Type Direct-Mount Type
Number Of Tools 8 10 12 12 8 10 12 12 8 10 12 12
Facing Tool Shank Height mm inch 32 1.25" 32 1.25" 32 1.25"
Boring Bar Shank Diameter mm inch 60 2.25" [80, 100 3.0", 4.0"]*2 60 2.25" [80, 100 3.0", 4.0"]*2 60 2.25" [80, 100 3.0", 4.0"]*2
Rotary Tool
Turret Type -Direct-
Mount Type-
Direct-Mount Type
-Direct-
Mount Type
Number Of Rotating Tools - 12 - 12 - 12
Spindle Speed min-1 - 3000 - 3000 - 3000
Maximum Tool Shank Diameter mm inch - 34 1.25" - 34 1.25" - 34 1.25"
Tool Spindle Taper Hole (Nom,Code) - AR50 - AR50 - AR50
Tool Spindle Bearing Inside Diameter mm inch - 55 2.17" - 55 2.17" - 55 2.17"
Tailstock
Tailstock Travel mm inch 800 31.5" 1800 70.87" 2800 100.24"
Quill Diameter mm inch 160 6.30" 160 6.30" 160 6.30"
Quill Taper MT. 6 [M.5:Built-In Tailstock] MT. 6 [M.5:Built-In Tailstock] MT. 6 [M.5:Built-In Tailstock]
Quill Travel mm inch 240 9.45" 240 9.45" 240 9.45"
Feedrate Rapid Traverse Ratem/min
inch/min12(X), 16(Z)
472.44"(X), 629.92"(Z)12(X), 16(Z)
472.44"(X), 629.92"(Z)12(X), 14(Z)
472.44"(X), 551.18"(Z)
Motors
Spindle Drive Motor (30min/continuous) kW HP 37/30 49.3/40 [45/37 60/49.3] 37/30 49.3/40 [45/37 60/49.3] 37/30 49.3/40 [45/37 60/49.3]
Rotary Tool Motor (S3 25%/continuous) kW HP 11/5.5 14.7/7.3 11/5.5 14.7/7.3 11/5.5 14.7/7.3
Axis Feed MotorskW HP
5.5(X), 6.0(Z), 2.5(T), 1.2(C)…CM Type Only7.3(X), 8.0(Z), 3.3(T), 1.6(C)…CM Type Only
5.5(X), 6.0(Z), 2.5(T), 1.2(C)…CM Type Only7.3(X), 8.0(Z), 3.3(T), 1.6(C)…CM Type Only
5.5(X), 6.0(Z), 2.5(T), 1.2(C)…CM Type Only7.3(X), 8.0(Z), 3.3(T), 1.6(C)…CM Type Only
Motor For Spindle Lubricating Pump kW HP 0.1 0.1 0.1 0.1 0.1 0.1
Hydraulic Pump Motor kW HP 2.8 3.7 2.8 3.7 2.8 3.7
Coolant Pump Motor kW HP 0.52 0.7 0.52 0.7 0.52 0.7
Power Source Required
Total Power Required kVA 57 [66] 57 [66] 57 [66]
Tank Capacity
Spindle Lubricant Tank L gal 40 10.56 40 10.56 40 10.56
Hydraulic Unit Tank L gal 20 5.28 20 5.28 20 5.28
Lubricant Tank L gal 6 1.58 6 1.58 6 1.58
Coolant Tank L gal 370 97.86 410 108.24" 450 118.80"
Machine Dimensions
Machine Height mm inch 2700 106.30" 2700 106.30" 2700 106.30"
Height from Floor To Spindle Centerline mm inch 1210 47.69" 1210 47.69" 1210 47.69"
Floor Space Requiredmm×mm
inch×inch 4800×2360
188.98"×92.91" 6000×2496
236.22"×98.27" 7330×2526
288.58"×99.45"
Machine Weight kg lbs. 15500 34100 15800 34760 18000 39600 18300 40260 20500 45100 20800 45760
1211 *The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. Machine SpecificationsMachine Specifications
NC Unit SpecificationsFANUC : 0 i-TD、32i-A
■ Composition
■ Main Function ListSpecifications・Contents 0i-TD 32i-A
【Controlled Axes】Least Input Increment *2 ● ●
Maximum Programmable Dimension (±999999.999) ● ●
Least Input Increment C *3 ▲ ○
Inch/Metric Selection ● ●
Interlock ● ●
Machine Lock *4 ○ ○
Emergency Stop ● ●
Stored Stroke Check 1 ● ●
Stored Stroke Check 2, 3 *5 ▲ ○
Stroke Limit Check Before Movement ▲ ○
Chuck Tailstock Barrie *6 ▲ ○
Mirror Image (Each Axis) ▲ ▲
Chamfering ON/OFF ● ●
Overload Detection *7 ▲ ○
Position Switch ◎ ◎
【Operation】Auto Run (Memory) ● ●
MDI Run ● ●
DNC Run *8 ◎ ◎
DNC Run With Memory Card *8 *9 ◎ ◎
Program Number Search ● ●
Sequence Number Search ● ●
Sequence Number Collation And Stop ● ○
Wrong Operation Preventive ▲ ▲
Buffer Register ● ●
Dry Run ● ●
Single Block ● ●
Jog Feed ● ●
Manual Reference Point Return ● ●
Dogless Reference Point Setting ● ●
Manual Handle Feed, 1 Unit ● ●
【Interpolating Functions】Positioning (G00) ● ●
Exact Stop Mode (G61) ● ●
Tapping Mode (G63) ● ●
Cutting Mode (G64) ● ●
Exact Stop (G09) ● ●
Linear Interpolation (G01) ● ●
Circular Interpolation (G02/03) ● ●
Dwell (G04) ● ●
Polar Coordinate Interpolation CM CM
Cylindrical Interpolation CM CM
Thread Cutting ● ●
Multiple Thread Cutting ● ●
Thread Cutting Cycle And Retraction ● ●
Continuous Thread Cutting ● ●
Variable Lead Thread Cutting ● ○
Reference Point Return (G28) ● ●
Reference Point Return Check (G27) ● ●
2nd Reference Point Return (G30) ● ●
3rd, 4th Reference Point Return ◎ ◎
【Feed Functions】Rapid Traverse Override (F0,25%,50%,100%) ● ●
Feed Per Minute ● ●
Feed Per Revolution ● ●
Constant Tangential Speed Control ● ●
Cutting Feedrate Clamp ● ●
Specifications・Contents 0i-TD 32i-AAutomatic Acceleration/Deceleration ● ●
Rapid Traverse Bell-Shaped Accel/Decel ● ●
Linear Accel/Decel After Feedrate Interpolation ● ●
Feedrate Override (15 steps) ● ●
Jog Override (15 steps) ● ●
Override Cancel ● ●
Manual Feed Per Revolution ▲ ▲
【Program Input】Tape Code (EIA/ISO Auto Recognition) ● ●
Label Skip ● ●
Parity Check ● ●
Control In/Out ● ●
Optional Block Skip, 1 Piece ● ●
Optional Block Skip (2 To 9 Pieces) ◎ ◎
Program Number O4 Digits ● ●
Program File Name 32 Characters - ●
Sequence Number N5 Digits ● -
Sequence Number N8 Digits - ●
Absolute/Incremental Command ● ●
Decimal Point Input/Pocket Calculator Type Decimal Point Input
● ●
Diameter/Radius Programming (X-Axis) ● ●
Coordinate System Setting (G50) ● ●
Auto Coordinate System Setting ● ●
Drawing Dimension Direct Input *10 ▲ ○
G-Code System A ● ●
G-Code System B/C *11 ▲ ○
Chamfering/Corner R Programming *12 ● ●
Programmable Data Input ● ●
Sub Program Call (10 Levels) ● ●
Custom Macro ● ●
Additional Custom Macro Common Variables ● ○
Single Canned Cycle ● ●
Combined Canned Cycle ● ●
Combined Canned Cycle Ⅱ ● ○
Drilling Canned Cycle ● ●
Arc Radius Programming ● ●
Macro Executor *13 ○ ●
Coordinate System Shift ● ●
Coordinate System Shift Direct Input ● ●
【Miscellaneous Functions/Spindle Functions】M Function (M3 Digits) ● ●
Second Miscellaneous Function (B Function) ● ○
Spindle Functions (S4 Digits) ● ●
Constant Surface Speed Control ● ●
Spindle Orientation ● ●
Rigid Tap (Spindle Center) ● ●
Rigid Tap (Rotary Tool) CM CM
【Tool Functions/Tool Offset Functions】T Function (T2+2 Digits) ● ●
Tool Offsets, 32 Pieces - ●
Tool Offsets, 64 Pieces ● ○
Tool Offsets, 99 Pieces ○ ○
Tool Offsets, 200 Pieces - ○
Tool Offsets, 400 Pieces - ○
Tool Geometry Size Data, 100 Pieces - ●
Tool Position Offset ● ●
Tool Diameter/Nose R Compensation ● ●
Tool Geometry/Wear Compensation ● ●
Tool Offset Counter Input ● ●
Tool Offset Measured Value Direct Input ● ●
Tool Offset Measured Value Direct Input B *14 ○ ○
Tool Life Management *15 ● ○
【Accuracy Offset Functions】Backlash Compensation ▲ ▲
Backlash Compensation By Rapid Traverse / Feedrate
▲ ▲
【Editing】Part Program Memory Capacity 512Kbyte (1280m) ● ●
Part Program Memory Capacity 1Mbyte - ○
Part Program Memory Capacity 2Mbyte - ○
Registrable Programs, 400 Programs ● -
Registrable Programs, 1000 Programs - ●
Program Editing ● ●
Program Protection ● ●
Extended Program Editing ● ●
Background Editing ● ●
Specifications・Contents 0i-TD 32i-A【Setting/Display】
Status Display ● ●
Clock Function ● ●
Current Position Display ● ●
Program Comment Display (31 Characters) ● ●
Parameter Setting And Display ● ●
Alarm Display ● ●
Alarm Log Display ● ●
Operator Massage Log Display ● ●
Operation Log Display ▲ ▲
Run Hours And Parts Count Display ● ●
Actual Speed Display ● ●
Actual Spindle Speed And T Code Display ● ●
Floppy Cassette Directory Display ● ●
Grouped Directory Display And Punching ● -
Servo Adjustment Screen ● ●
Maintenance Information Screen ● ●
Data Protection Key, 1 Kind ● ●
Help Function ● ●
Self Diagnostic Function ● ●
Scheduled Maintenance Screen ● ●
Hardware & Software System Configuration Display ● ●
Graphic Display ● ●
Dynamic Graphic Display ○ -
【Display Languages】English *16 ● ●
Japanese (Kanji) *16 ▲ ▲
Other Language *16 *17 ▲ ○
Display Language Dynamic Switching ▲ ▲
【Data I/O】
Reader/Puncher Interface For 1ch ● ●
Fast Data Server ◎ ◎
External Message ● ●
External Workpiece Number Search ◎ ◎
Memory Card I/O ● ●
● : Standard ○ : Optional ◎ : Special - : None▲ : Parameter setting is required.(Note: Normally, the parameters need not to be changed. If the parameters are to be set or changed, understand completely the functions of such parameters. Wrong setting could cause the machine to be moved unexpectedly, resulting in machine or workpiece damage or personal injury.)
CM : C-Axis/Milling Standard Specification
*1) I/O addition and the PC change are necessary.
*2) 0.001mm、 0.0001inch、 0.001deg (for CM type)
*3) IS-C 0.0001mm 0.0001deg 0.00001inch.
*4) Addition of switch is required.
*5) Not coexistent with chuck tailstock barrier.
*6) Not coexistent with Stored Stroke Check 2, 3.
*7) Required when RAKU-RAKU Monitor 3 is used.
*8) DNC run mode transfer switch is required.
*9) CF card and adaptor is required.
*10) Not coexistent with chamfering/corner R.
*11) Cannot be used when Tiwap-1.
*12) Not coexistent with drawing dimension direct input.
*13) Required when RAKU-RAKU Monitor 3/RAKU-RAKU Loader 3 is used.
*14) Tool setter is required.
*15) Cannot be used when RAKU-RAKU Monitor 3 is installed.
*16) Cannot be simultaneous display the other languages.
*17) German, French, Spanish, Italian, Chinese (traditional), Chinese (simplified), Korean, Portuguese, Dutch, Danish, Swedish, Hungarian, Czech, Polish, Russian, Turkish
Specifications・ContentsStandard Type Tiwap-1 Type
0i-TD 32i-A
【NC Unit】8.4"Color LCD ● -
10.4"Color LCD - ●
【Software】RAKU-RAKU Monitor 3 ○ ○
Measurement Monitor 3 *1 ◎ ◎
Tiwap-1 - ●
【Safety Devices】Front Door Interlock ● ●
Front Door Locking Mechanism ○ ○
Safety Relay ● ●
Control Panel Breaker With Tripper ● ●
※ Please contact our sales persons for further information.
■ Interactive Programming That Everybody Can Use
【Standard in 32i-A】
Software* The software specifications are subject to change for improvement without notice.
Turning through interactive inputs with
Japanese/English display Takisawa
original software can program the
process in a complete interactive style.
Easy and convenient multi-functional
softwares that can perform the
tool life management, cutting load
monitoring, group control, and also run
information collection, Cp (process
capability) calculation, and periodic
offset addition.
This function loads the measured data from a measuring unit and sets automatically the
offset value. Also, various convenient functions such as graphical display, Cp (process
capability) calculation, and data input/output are included.
【Optional Accessories】
【Optional Accessories】
▲ RAKU-RAKU Monitor 3
RAKU-RAKU Monitor 3
Measurement Monitor 3
1413 *The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.*The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. NC Unit SpecificationsNC Unit Specifications
*The appearance, specifications, and relevant software of the product are subject to change for improvement without notice.*Please make an inquiry to our sales representatives for details of the product.
TAKISAWA MACHINE TOOL CO.,LTD.
983 Natsukawa, Kita-ku, Okayama 701-0164, JAPANTelephone : (81)86-293-1500Fax : (81)86-293-5799Website : http://www.takisawa.co.jpE-mail : [email protected] (America)
[email protected] (Europe)[email protected] (Asia)
Japanese laws prohibit this machine from being used to develop or manufacture “weapons of mass destruction” or “conventional arms”, as well as from being used to process parts for them.Export of the product may require the permission of governmental authorities of the country from where the product is exported.Should you wish to resell, transfer or export the product, please notify Takisawa Machine Tool Co., Ltd. or our distributor in advance.
■ Overseas Network
NC54E1003EA2000A
THAILAND Takisawa (Thailand) CO.,LTD.Telephone : (66)2726-1530-2 Fax : (66)2726-1533
INDONESIA Takisawa Machine Tool Indonesia Representative OfficeTelephone : (62)21-4534310 Fax : (62)21-4534778
INDIA SAP Takisawa Machine Tools Private Ltd.Takisawa Mchine Tool India Liaison OfficeTelephone : (91)80-26662386 Fax : (91)80-26662392
CHINA Takisawa (Shanghai) Co., Ltd.Telephone : (86)21-6235-0938 Fax : (86)21-6235-0905
USA Takisawa, Inc. Telephone : (1)847-419-0046 Fax : (1)847-419-0043
GERMANY Takisawa Machine Tool Germany Representative OfficeTelephone : (49)2056-2598-15 Fax : (49)2056-5994-79
ENGLAND Takisawa UK Ltd. Telephone : (44)1527-522211 Fax : (44)1527-510728