Clinical Practice Week

  • Upload
    13bells

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

  • 8/13/2019 Clinical Practice Week

    1/5

    CLINICAL PRACTICE WEEK

    BASIC LABORATORY TECHNOLOGY

  • 8/13/2019 Clinical Practice Week

    2/5

    Basic Lab Tech/DMLT 13 th Batch

    Page 2 of 5 Department of Biomedical Sciences/FHS/MNU

    CLINICAL PRACTICE WEEK

    BASIC LABORATORY TECHNOLOGY

    DAY 1:

    Task: 1: Glass pipetting (15 minutes)

    1. Measure 10ml of the solution C by using the graduated pipette provided2. Measure 01ml of the solution D using the graduated pipette provided

    Task 2: Identification of glass ware (2minutes x7)

    ITEM USE

    Task 3: Approximate reagent preparation (15 minutes)

    1. Prepare 50ml of 2.5% Sodium chloride less accurately

    Task 4: Harvard Trip Balance (7.5 x 2 minutes)

    Measure the mass of the following using the Harvard Trip Pan Balance

    A:

    B:

  • 8/13/2019 Clinical Practice Week

    3/5

    Basic Lab Tech/DMLT 13 th Batch

    Page 3 of 5 Department of Biomedical Sciences/FHS/MNU

    DAY 2:

    Task 1: Serial dilution/Microtitre dilution (15 minutes)

    In immunology, serial dilutions are often made of serum samples. How could you a final

    dilution of 1 to 320 be made? The sample volume is 20l. In a micro titer plate make thestated serial doubling dilutions from the provided Solution F, as given in the table

    Well1 2 3 4 5

    A1/10 1/20 1/40 1/160 1/320

    Complete the following

    a. Volume of sample should be taken in to the first well 20 l

    b. Volume of diluent should be taken in to the first well ____________

    c. Volume of diluent should be taken in to the 2 nd and the following wells ________

    d. Volume of diluted solution to be transferred from the first well to the second

    well___________

    e. Dilution of the solution in the 8 th well is ______________

    Procedure

    1. Label the micro titer plate2. Set the correct volume in the micropipette3. Pipette _______ l of diluent into the first well4. Pipette _______ l of sample into the first well5. Pipette _______ l of diluent into the wells from 2 to 86. Mix the content of first well and transfer ____ l of solution from first well to the

    second well and repeat the procedure serially with the six remaining tubes7. Discard _______ l from the last tube.

  • 8/13/2019 Clinical Practice Week

    4/5

    Basic Lab Tech/DMLT 13 th Batch

    Page 4 of 5 Department of Biomedical Sciences/FHS/MNU

    Task 2: Microscope (15 minutes)

    1. Focus the given urinary sediment at 40x and show it

    Task 3: Colorimeter (15 minutes)

    1. Measure the absorbance of the following solution. Use de-ionized water as thereagent blankA:B:

    Task 4: pH meter (15 minutes)

    1. Measure the pH of the solutions provided and record your value

    H:

    J:

    Task 5: Accurate reagent preparation (15 minutes)

    1. Prepare 50ml of 3% Sodium Chloride accurately

    Task 6: (5minutes x3)

    1. Identify the labeled parts of the centrifuge and state their function

    A:

    B:

    C:

    2. Identify the labeled parts of the autoclave

    A:

    B:

    C

    3. Read the volumes of the following

    A: C:

    B: D:

  • 8/13/2019 Clinical Practice Week

    5/5

    Basic Lab Tech/DMLT 13 th Batch

    Page 5 of 5 Department of Biomedical Sciences/FHS/MNU

    DAY 4: Autoclave

    1. Set up the provided items for a decontamination cycle2. Run a decontamination cycle in the manual autoclave( the pressure cooker)