Cleanview Powerbrush

8/13/2019 Cleanview Powerbrush

1/16

2 Thank You

USER'S GUIDE34C9, 44L6 SERIES 220-240V

Safety Instructions

Product View

Assembly

Operations

Maintenance and Care

Troubleshooting

Consumer Services

Replacement Parts

3

4

5

6-11

12

13

16

14

Accessories

Warranty

14

15


2/16

w w w d i r e c t. b i s s e l l . c o . u k

Thanks for buying a BISSELL CleanViewPowerBrush

Were glad you purchased a BISSELL CleanView PowerBrush.Everything we know about floor care went into the design andconstruction of this complete, high-tech home cleaning system.

By purchasing this product you are helping BISSELL with ourcommitment to reducing our impact on the environment throughan expanding range of sustainable design efforts.

Your BISSELL CleanView PowerBrush is well made, and we backit with a limited two-year warranty. We also stand behind it with aknowledgeable, dedicated Consumer Services department, so, shouldyou ever have a problem, youll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today,BISSELL is a global leader in the design, manufacture, and serviceof high quality homecare products like your BISSELLCleanView PowerBrush.

Mark J. BissellChairman, President & CEO

2
http://www.bisselldirect.co.uk/http://www.bisselldirect.co.uk/http://www.bisselldirect.co.uk/http://www.bisselldirect.co.uk/


3/16

When using an electrical appliance,basic precautions should be observed,including the following:

READ ALL INSTRUCTIONSBEFORE USING YOURDEEP CLEANER.Always connect to a properly Earthedoutlet. Unplug from outlet when not in useand before conducting maintenance ortroubleshooting.

WARNING:Toreduce the risk of fire,electric shock, or injury:Use indoors only

Do not immerse; use only on surfacesmoistened by cleaning process

Do not leave machine when it is plugged in

Do not service machine when it is plugged in

If the supply cord is damaged, it mustbe replaced by the manufacturer or its

service agent in order to avoid a hazard Do not use machine if it has been

dropped, damaged, left outdoors ordropped into water

Do not pull or carry by cord, use cord as ahandle, close door on cord, pull cord aroundsharp corners or edges, run appliance overcord, or expose cord to heated surfaces

Do not carry the appliance while in use Do not unplug by pulling on cord;

unplug by grasping plug not the cord Do not handle plug or appliance with

wet hands Do not put any object into appliance openings,

use with blocked opening or restrict air flow Do not expose hair, loose clothing, fingers

or body parts to openings or moving parts Do not pick up hot or burning objects Do not pick up flammable or combustible

materials (lighter fluid, petrol, kerosene,etc.) or use in the presence of explosiveliquids or vapours

Do not use appliance in an enclosed spacefilled with vapours given off by oil basepaint, paint thinner, some moth proofingsubstances, flammable dust, or otherexplosive or toxic vapours

Do not operate the appliance unless thebelt door is securely assembled in thelocation provided

Remove plug from electrical outlet beforecleaning or maintaining the appliance

Not intended for use by persons (including

children) with reduced physical, sensory ormental capabilities, or lack of experienceand knowledge, unless they have beengiven supervision or instruction concerninguse of the appliance by a person respon-sible for their safety

Young children should be supervised to ensurethat they do not play with the appliance

Do not pick up toxic material (chlorinebleach, ammonia, drain cleaner, petrol, etc.)

Do not modify the Earthed plug Do not use for any purpose other than

described in this Users Guide Use only manufacturers recommended

attachments Use only cleaning products formulated

by BISSELL for use in this appliance toprevent internal component damage

Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface

Turn off all controls before unplugging Be extra careful when cleaning stairs Pay close attention when working

around children

SAVE THESEINSTRUCTIONSFOR FUTURE USEThis model is for household use only.

WARNING:This appliance must be Earthed.

IMPORTANTFOR OPERATION ON A 220-240 VOLTA.C. 50/60 Hz POWER SUPPLY ONLY.

If your appliance is fitted with anonrewireable BS 1363 plug it must not beused unless a 13 amp (ASTA approved to BS1362) fuse is fitted in the carrier containedin the plug. (Spares may be obtained from

your BISSELL supplier). If for any reason theplug is cut off, it must be disposed of, as it isan electric shock hazard should it be insertedinto a 13 amp socket.

w w w . b i s s e l l d i r e c t . c o . u k

IMPORTANT SAFETY INSTRUCTIONS

3
http://www.bisselldirect.co.uk/http://www.bisselldirect.co.uk/


4/16

w w w . b i s s e l l d i r e c t . c o . u k4

Product view

DirtLifterPowerBrush

Belt AccessDoor

Ready ToolsDial

RemovableNozzle

ErgonomicallyDesignedHandle

HandleAssembly

Lower BodyAssembly

Upper BodyAssembly

Edge SweepBrushes

Easy Carry

Handle

WARNING:To reduce the risk of fire and electricshock due to internal componentdamage,use only BISSELL cleaningformulas intended for use with thedeep cleaner. Non-BISSELL cleaningformulas may harm the machineand void the warranty.

Cleaning formula:

Note: Additional BISSELL formula options may be available at your local retailer.

Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protectwhenever it fits your schedule. Always use genuine BISSELL deep cleaningformulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.

651 mLToughStainPrecleaner#0400-E

473 mL2X HardFloorSolutions#56L9-E

1.5 L2X Wash &Protect PetStain & OdourFormula w/Scotchgard

Protector#66W9-E

1.5 L2X Wash& ProtectProfessionalFormula w/ScotchgardProtector#81L5-E

1.5 L2X Wash &Protect FreshFragranceFormula w/Scotchgard

Protector#92F4-E

1.5 L2X Wash& ProtectSpring BreezeFragranceFormula w/Scotchgard

Protector#12W4-E

1.5 L2X Wash& ProtectLavenderFragranceFormula w/Scotchgard

Protector#33D2-E
http://www.bisselldirect.co.uk/http://www.bisselldirect.co.uk/cleanview-powerbrushhttp://www.bisselldirect.co.uk/cleanview-powerbrushhttp://www.bisselldirect.co.uk/cleanview-powerbrushhttp://www.bisselldirect.co.uk/


5/16


Assembly

5

WARNING:Do not plug in your cleaneruntil you have completely assembledit per the following instructions andare familiar with all instructions andoperating procedures.

1.

2.

3.

5.6.

TabUpper Hose Rack

Notch

4.

Your CleanViewPowerBrush comes infive easy to assemble components:

Handle assembly

Upper body assembly Upper hose rack

Lower body assembly

Lower hose rack

Three Phillips head screws areincluded and can be found taped tothe handle assembly.The only tool you will need toassemble your cleaner is a Phillipshead screwdriver.

1. Slide upper body assembly onto lowerbody and secure with two screws.

2. With the tabs on upper hose rackpointing toward top of handle, attachupper hose rack to handle assemblyby sliding it to top of handle until itcan go no further. Turn hose rack untilit snaps into place.

3. Slide handle assembly down into upperbody until it will go no further andsecure with screw.

4. Attach lower hose rack to back ofupper body by pushing into open slotsand sliding down until it snaps intoplace.

5. Wrap flex hose around hose rack andsecure it into notched out holder asshown.

6. Keep flex hose locked in place withhose secure latch.

HoseSecure

Latch


6/16


Operations

6

Special features

Your BISSELL CleanViewPowerBrush

is a home cleaning system that usesa combination of hand hot tap water,BISSELL advanced cleaning formula,brush agitation and suction to safelyclean carpets.

DirtLifterPowerbrushThe DirtLifter PowerBrush is designed toenhance cleaning performance. The bristle pat-tern safely lifts out the deep down dirt whilegently grooming carpet fibers. The floating

suspension self-adjusts to all carpet heights.When the power is ON and the machine is inthe upright position, your carpet is protectedbecause the brushes are lifted up off the carpet.

ReadyToolsDialThe Ready Tools feature allows you to choosebetween FLOOR CLEANING or cleaning withTOOLS simply by turning the dial. The TOOLSsetting allows for above floor cleaning ofupholstery, stairs, creases along baseboards,and other hard to reach areas. Simply choosethe tool that is appropriate for the job, attach toflex hose and you are ready to go.

Measuring cupYour deep cleaner is equipped with a measuringcup for adding the proper amount of formula tothe 2-in-1 tank. For convenience the measuringcup is built into the lid of the 2-in-1 tank.

2-in-1 water tankOur 2-in-1 water tank system is designed witha heavy duty bladder inside for clean water.As you clean, the clean water in the bladderwill empty and mix with the cleaning formula.Dirty water pulled out of your carpet will collectaround the outside of the bladder so clean anddirty water are always kept separate. This allowsthe user to maximize tank space, yet only carryone tank to and from the sink for emptying andfilling.

Microban antibacterial protectionMicroban antibacterial protection helps preventthe growth of harmful common household bacteriaincluding E. coli, Salmonellaand Staph. a. It helpsto keep the unit fresher and cleaner between uses.

ATTENTION:Some Berber carpets have a tendency tofuzz with wear. Repeated strokes in thesame area with an ordinary vacuum ordeep cleaner may aggravate this condition.

Measuring Cup

CarryHandle

WARNING:To reduce the risk of fire, use onlyBISSELL deep cleaning formula forfull size machines in your deepcleaner. Use of cleaning formulasthat contain lemon or pine oilmay damage this appliance andvoid the warranty. Chemical spotcleaners or solvent-based soilremovers should not be used.These products may react with theplastic materials used in your deep

cleaner causingcracking or pitting.

ReadyToolsDial


7/16


7

Operations

Special features continued

ScotchgardProtector

Carpet protection applied at the mill typi-cally wears down over time from heavy foottraffic and everyday cleaning, includingdeep cleaning. To help restore this impor-tant protection, only BISSELL offers cleaningformulas with Scotchgard protector. Thisoffers extra protection against dirt andtough stains to keep your carpets lookinggood longer.

Before you clean

1. Plan activities to give your carpet timeto dry.

2. Move furnitureto another area ifcleaning an entire room (optional).

3. Vacuum area with a dry vacuumcleaner before deep cleaning.

4. Plan your cleaning route to leave an exit

path. It is best to begin cleaning in thecorner farthest from your exit.

5. Pretreating(optional)Pretreating is recommended to improvecleaning effectiveness for heavily soiled carpetin high traffic areas such as entry waysand hallways.

To pretreat:

A.Using the BISSELL Tough StainPrecleaner, generously sprayevenly over soiled area, do notoverwet.

B. Wait 3-5 minutes before deepcleaning.

C. Clean as normal using your BISSELLdeep cleaner, following theinstructions below.

2

4'

3'

1

3

4

5 6

7

910

1112

EXIT

START

HERE


8/16


Operations

8

Fill the 2-in-1 water tank

1. Remove the tank from the base of themachine by lifting the tank carry handle.

2. Carry like a bucket to the sink. Rotatethe handle forward to unlatch the lid.Remove lid, turn over and locate built inmeasuring cup.

3. Fill with BISSELL 2X formula to theindicated fill line on the built inmeasuring cup and pour into mouthof the bladder.

4. Fill the bladder with clean hand hottap water.*Do not boil or microwavewater as it can destroy thebladder.

5. Replace the top of the tank bymatching the lid and tank edges.Handle must be in the forward posi-tion in order to replace lid. Rotatethe handle to the carrying position tolatch the lid.Note: Remember to secure the lidand test to make sure it is securebefore picking up the tank.

6. Place tank into machine base, seatingfirmly in place. Rotate tank handleback into latched position.

6.

Tip:Thorough vacuumingbefore deep cleaning willprevent early clogging ofthe lint trap.

WARNING:To reduce the risk of fire and electricshock due to internal componentdamage, use only BISSELL cleaningformulas intended for use with thedeep cleaner. Non-BISSELL cleaningformulas may harm the machine andvoid the warranty.

5.

1. 2.

43.


9/16


9

Operations

Carpet cleaning

1. Plug the deep cleaner into a properoutlet. Turn the power ON by pressingthe red power switch on the back of theunit with your foot.

2. With your foot, press the gray handlerelease lever located on the back of unitbelow water tank.

3. While pressing the spray trigger, makeone slow forward wet pass and anotherback. Let the BISSELL 2X deep cleaningformula and DirtLifter PowerBrush do thework for you.Caution: Do not overwet.

4. Release the spray trigger and make oneslow forward and backward pass overthe same area to remove any residualdirty water and aid in drying.

5. Repeat cleaning passes until solu-tion being pulled up appears clean.

Continue passes without pressing thespray trigger until you cant see anymore water being suctioned up.

1. Turn power switch OFF. Remove the 2-in-1water tank from the base using the tank carryhandle. Carry the tank like a bucket to autility sink or outside where you will disposeof the collection water. Remove the top of

the tank by rotating the handle forward tounlatch lid and lifting lid off tank.

2. Empty collection water from bottom of tank.

3. After each use, remove and rinse the lintscreen located on the tank lid.

4. If nozzle needs to be cleaned, remove bygrasping handle at the top and pulling for-ward. Clean removable nozzle by rinsing

under running water.5. When finished, replace nozzle by slightly

raising front of machine to line up slots onthe base with the hooks on nozzle. Attach atbase first and then click nozzle into place.NOTE: If nozzle is not attached prop-erly loss of suction will occur.

Empty the 2-in-1 water tank/clean removable nozzle

Handle Release

2.

3.

1.

5.

Lint Screen

Power Switch

4.


10/16


Operations

6. To continue carpet cleaning, refer back topages 8 through 9, beginning with Fill

the 2-in-1 water tank on page 8.If cleaning is complete, refer to theMaintenance and care section onpage 12.

Ready Tools

Your CleanViewPowerBrush comesequipped with a hose and at leastone attachment for cleaning stairs,

upholstery, and more.Important! If using the machineto clean upholstery, check uphol-stery tags.

1. Check manufacturers tag before cleaning.W or WS on the tag means you canuse your deep cleaner. If the tag is codedwith X or S (with a diagonal strikethrough), or says Dry Clean Only, donot proceed. Do not use on velvet or silk. If

manufacturers tag is missing or not coded,check with your furniture dealer.

2. Check for colourfastness in aninconspicuous place.

3. If possible, check upholstery stuffing.Coloured stuffing may bleed through fabricwhen wet.

4. Plan activities to give upholstery time to dry.

5. Vacuum thoroughly to pick up loose debrisand pet hair. Use a vacuum with a brushattachment and a crevice tool to clean infabric folds and tufts.

6. To begin cleaning with attachments, followthe instructions on pages 7-8 for filling the2-in-1 water tank.

7. Set the ReadyTools dial to the TOOLS set-ting. This will allow spray and suction from

the hose.8. Attach the cleaning tool to the end of the

hose.

7.

Tip:To clean with slidingcrevice tool, slide brushesforward to clean stain, slideback to suction

Adsdfddghg

bvh

cvbbj

jkn

hnbj

jkvh

gcghhjjjhffhl

kllgh

Manufacturers tag

Empty the 2-in-1 water tank/clean removable nozzle continued


11/16


11

Operations

Ready Tools continued

9. Clean by pressing the spray trigger to spraysolution onto the area to be cleaned. Slowly

move the tool back and forth over the soiledsurface. Release the spray trigger to suctiondirty water. Continue to clean in the area,working in small sections, until dirt is removed.Caution: Do Not Overwet.

10.When finished cleaning, remove and rinsetool(s) in clean, running water.

11. It is recommended that you suction cleanwater from a bowl to rinse out the hose.

12.Before wrapping hose onto tool rack, lift endof hose and stretch out to ensure all water iscleared from hose.

13.Wrap flex hose around tool rack.

14. Empty 2-in-1 water tank and rinse out,following instructions on pages 9 through 10.

15. If the ReadyTools dial becomes difficult toturn, the diverter assembly that holds thedial may need to be cleaned. To clean,

first remove nozzle and locate screw thatholds the diverter assembly in place. With aPhillips screwdriver, remove the screw andset aside.

16. Remove diverter assembly; hold under run-ning water making sure water flows throughand around the dial. Turn the dial about 10times clockwise and 10 more times counterclockwise. This should free up any debris.

17.Wipe diverter assembly with a soft cloth andreplace back on machine. Replace nozzle.

18. Return ReadyTools dial toFLOOR CLEANING setting.

Cleaning with Deep Reach Tool(select models only)

1. Set tool on soiled surfaces and press thespray trigger to spray solution onto thesoiled area to be cleaned.

2. Slowly move the tool back and forth overthe soiled surface, keeping the tool in con-tact with the carpet.Release spray trigger and move toolslowly over the soiled area to suction upwater and dirt.

4. Continue to clean the area, working in smallsections, until no more dirt can be removed.

15.

12.

16.

Screw

Run water through here

11.

1.

3.


12/16


Maintenance and care

Machine care

For best results, a few simple steps canassure your machine is well maintained

after your cleaning is complete.1. Turn power switch OFF. Unplug the machine

and wrap the power cord.

2. After emptying the 2-in-1 water tank, rinseit with running hot tap water, taking careto clean underneath and around the heavyduty bladder. Clean out red lint screen.Removable nozzle may be rinsed if neces-sary. Refer to page 9.

3. Replace the 2-in-1 water tank on the machine.

4. Any loose hair or debris can be pulled fromthe brush roll and thrown away.

5. To clean attachments, remove from hose andrinse in clean, running water. Dry beforestoring. Clean the hose by suctioning cleanwater from a bowl. Before wrapping backon machine, lift end of hose and stretch outto ensure all water is cleared from hose.

Refer to page 11, illustrations 11 and 12.6. Wipe the machines exterior with a soft cloth.

7. After carpet is dry, vacuum again to removehair and fuzz.

Machine storage

Put the unit away in a closet or base-ment for the next use. Store cleaner ina protected, dry area. Since this productuses water, it must not be stored wherethere is a danger of freezing. Freezingwill damage internal components andvoid the warranty.


13/16


13

Troubleshooting WARNING:To reduce the risk of fire, electric shock orinjury, unplug from the outlet before servicing.

Reduced Spray OR No SprayPossible causes Remedies

1. Bladder may be empty. 1. Turn power switch OFF; Refill bladder

with clean hot tap water.2. 2-in-1 tank may not be seated properly. 2. Turn power switch OFF; remove tank

and reseat tanks.

3. Pump may have lost prime. 3. Turn power switch OFF; after 1 minuteturn ON and depress spray trigger.

4. The pump belt may be broken. 4. Turn power switch OFF and unplug from the outlet. Tocheck if a pump belt has broken, you will need a flathead screwdriver.

A. Insert the blade end into the slot of the belt access

door to release. Examine the belt for breakage. Youshould be able to see the pump belt looped around themotor shaft. If it is broken or missing, please refer toReplacement Parts on page 14. A replacement belt maybe ordered by calling BISSELL Consumer ServicesComplete installation instructions will accompany thereplacement belt.B.When replacing belt access door be sure to line upslots of belt access door with slots in machine,slide door into place and snap shut.DirtLifter PowerBrush Does Not Turn

Possible causes Remedies1. The brush belt or pump belt is off or broken. 1. Refer to Remedy 4 above to check if brush

belt or pump belt is broken.Cleaner Not Picking Up SolutionPossible cause Remedies

1. ReadyTools dial may be on the wrong setting. 1. Set ReadyTools dial to either FLOOR CLEANING orTOOLS for the cleaning job.

2. Poor tool position. (Hand held attachments only). 2. Adjust angle; apply more downward pressure.

3. Removable nozzle may not be properly attached. 3. Make sure nozzle is on correctly by slightly raising

front of machine to line up slots on the base ofthe machine with the hooks on nozzle. Attach atbase first and then click nozzle into place. Refer toimage 5 on page 9.

4. 2-in-1 tank lid is not properly installed. 4. Re-install lid; refer to the image on page 8.

5. 2-in-1 tank is not properly seated. 5. 2-in-1 tank must be firmly seated to function;remove and reseat 2-in-1 tank.

6. 2-in-1 tank has picked up maximum dirty water. 6. Empty 2-in-1 tank and refill, refer to theOperation section.

7. The lint screen may be clogged. 7. Clean out lint screen. Refer to page 9.Other maintenance or service not included in the manual should be

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

Slots

B.

Pump Belt

A.


14/16


Replacement parts

Accessories and formula

Item Part No. Part Name1 203-0104 Tank Assembly Complete2 203-0102 Tank Base

3 203-8114 Removable Nozzle4 215-0628 Replacement Pump Belt (with instructions)5 015-0621 Replacement Brush Belt (with instructions)6 203-0105 Lint Screen

1 52 63 4

While not all of these parts may not have come with your machine, allare available to you for purchase, if desired.

Item Part No. Part Name1 203-0149 Hard Floor Tool2 203-6651 3" Tough Stain Tool3 203-8114 4" Upholstery Tool4 203-6654 6" Stair Tool

5 203-6652 Powered TurboBrush

Hand Tool6 203-0116 Spraying 2-in-1 Crevice Tool w/Brush7 203-6655 Spraying Crevice Tool8 203-8113 Deep ReachTool9 210-3040 Mesh Tool Storage Bag10 81L5-E 1.5 L 2X Wash & Protect Professional Formula w/ ScotchgardProtector11 66W9-E 1.5 L 2X Wash & Protect Pet Stain & Odour Formula w/ ScotchgardProtector12 92F4-E 1.5 L 2X Wash & Protect Fresh Fragrance Formula w/ ScotchgardProtector13 12W4-E 1.5 L 2X Wash & Protect Spring Breeze Fragrance Formula w/

Scotchgard

Protector14 33D2-E 1.5 L 2X Wash & Protect Lavender Fragrance Formula w/ ScotchgardProtector15 56L9-E 473 mL 2X Hard Floor Solutions16 0400-E 651 mL Tough Stain Precleaner

1

6

13

2

7 8

14

3

9

15

4

11

16

5

12

10

Note: Additional BISSELL formula options may be available at your local retailer.


15/16


15

Warranty - BISSELL CleanViewPowerBrush

This warranty gives you specific legal rights, and you may also have other rights which mayvary from country to country. If you need additional instruction regarding this warranty or havequestions regarding what it may cover, please contact BISSELL Consumer Services bytelephone, or regular post as described below, or contact your local in country distributor.

Limited Two Year WarrantySubject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc.,will replace (with new or remanufactured components), at BISSELLs option, free of chargefrom the date of purchase by the original purchaser, for two years any defective ormalfunctioning part do to manufacturers defect.This warranty applies to product used for personal, and not commercial or rental service. Thiswarranty does not apply to fans or routine maintenance components such as filters, belts, orbrushes. Damage or malfunction caused by negligence, abuse, or use not in accordance withthe Users Guide is not covered.

BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIALDAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT.BISSELLS LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL ORWRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARELIMITED TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

For UK inquiries:

Monday - Thursday 9 am 5 pm

Friday 9 am 4 pm

BISSELL Homecare (Overseas)Ground Floor226 Berwick AvenueSloughBerkshire, SL1 4QT

United KingdomTelephone: 0844-888-6644

For all other inquiries:

Monday - Friday 8 am 4 pm

BISSELL Homecare, Inc.PO Box 1888Grand Rapids, Michigan 49501 USATelephone: 01-616-453-4451Fax: 01-616-453-1383


16/16

16

If your BISSELL product should require service:Call BISSELL Consumer Services at the numbers below and we will give you the location of aBISSELL Authorized Service Center in your area. If you have questions about your warranty or

need replacement parts please contact the numbers below.

Or visit the BISSELL website -www.bissell.com

When contacting BISSELL, have model number of cleaner available.Please record your Model Number: ___________________

Please record your Purchase Date: ___________________NOTE: Please keep your original sales receipt. Itprovides proof of purchase date in the event of awarranty claim. See Warranty on page 15 for details.

For UK inquiries:

Monday - Thursday 9 am 5 pm

Friday 9 am 4 pm

BISSELL Homecare (Overseas)Ground Floor226 Berwick AvenueSlough

Berkshire, SL1 4QTUnited KingdomTelephone: 0844-888-6644

For all other inquiries:

Monday - Friday 8 am 4 pm

BISSELL Homecare, Inc.PO Box 1888Grand Rapids, Michigan 49501 USATelephone: 01-616-453-4451Fax: 01-616-453-1383

BISSELL consumer services

2012 BISSELL Homecare, IncGrand Rapids, MichiganAll rights reserved. Printed in ChinaPart Number 120-4413Rev 9/11Visit our website at:www.bissell.comScotchgard is a trademark of 3MMicrobanis a registered trademarkof Microban Products Company

Documents

Cleanview Powerbrush