Classroom Collaboration--Mythware* Training Foils Touch 2600/Training on...When the computer successfully connects to the network, the selected wireless network will show as Connected

2010/5/111

Inter-powered classmate PC

Classroom Collaboration--Mythware*Training Foils

Version 2.0

*Other names and brands may be claimed as the property of others.

2010/5/112

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Intel and the Intel logo are trademarks or registered trademarks of Intel Corporation in the United States and other countries.

Copyright © 2010, Intel Corporation. All rights reserved.

*Other brands and names are the property of their respective owners.


Legal Information

2010/5/113

Revision Table

Document Revision Revision History Release Date

1.5 Intel-powered classmate PC version 1.0 and second generation Intel-powered classmate PC

WW08 ’08

1.7.0 Second generation Intel-powered classmate PC and second generation Intel-powered classmate PC refresh

WW42 ’08

2.0 Updates for Windows* 7 Support WW11 ’10


2010/5/114

Agenda

Pre-Training

Installation

How to Use

Uninstall

Q&A

2010/5/115

Introduction

Intel-powered classmate PC refresh is a mobile personal learning device for elementary school age students. Developed specifically to enhance teaching and learning, classmate PCs engage children with “real PC” performance in a rugged, child-friendly design. The Classmate PC comes with practical, education-oriented features that improve the learning experience for students, teachers, parents, and schools.

These slides discuss Classroom Collaboration which applies toe-Learning.


Pre-Training

2010/5/116

Pre-Training

Background:

Classroom Collaboration addresses many of the time-consuming activities teachers perform in their day-to-day schedules, including attendance monitoring, lesson preparation, and class tests administration. These slides are designed to show OEM customers how to train teachers and students on the installation, implementation, and operation of Classroom Collaboration running on second generation Intel-powered classmate PCs.

Audience:

This training document is intended for Intel marketing, Intel GEO technical marketing engineers (TMEs), Intel local field application engineers (FAEs), OEM technical staff, and other NDA-covered company staff who will work with teachers and students on the installation, implementation, and operation of Classroom Collaboration.

2010/5/117

Pre-Training

General Purpose:

The fundamental subject covered in these slides are:

• How to install and uninstall the Classroom Collaboratione-Learning application to and from teacher computers. Also to install the application to Intel-powered classmate PC student systems.

• How to establish and configure wireless networks while running the Classroom Collaboration e-Learning application.

• How to operate the Classroom Collaboration e-Learning from both teacher computers and Intel-powered classmate PCs.

The processes outlined in this document are valid in the English (US version) software language version.


Note: For further information, please refer to Help file or User Manual integrated in this application.

2010/5/118

Hardware requirements:

Regular computer as Teacher Side

Intel-powered classmate PC as Client Side

Wireless Access Point with 802.11 g/n support (For example: Linksys* WRT160N)

Operating System:Windows* XP Windows* 7

Software requirements:

1) Mythware installation package for teacher version

2) Mythware installation package for student version

The applications are available in IBP.

To access the portal, use the following URL: Businessportal.intel.com

Pre-Training

Note: On this training foil, all screen shots are based on Win*7 Pro, but it supports all OS as listed in Operating System. Some UI features may be different on different OS, but the function is same.

2010/5/119

Agenda

Pre-Training

Installation

How to Use

Uninstall

Q&A

2010/5/1110

Installation (Mythware E-learning – Teacher)

Installation (Mythware E-learning – Student)

2010/5/1111

InstallMythware E-learning - Teacher

Note: If there is already a version of the application in your system, it will be

uninstalled automatically before the new version is installed.

1. Double-click Mythware E-learning(teacher) installation program. Select the language and then click OK.

2010/5/1112

2. Click Next.

3. Select I accept the terms in the License Agreement and then click Next.


2010/5/1113

4. Click Next until the following window displays. Select the item in the Start Menu Shortcuts Folder and then click Next.

5. Click Install.


2010/5/1114

6. Choose the Start Menu Shortcuts Folder then click Next to proceed.

7. Click Install to proceed.


2010/5/1115

8. Wait for process to complete.

9. Click Yes to restart the computer, the Mythware E-learning -Teacher will be

installed on the teacher’s PC.


2010/5/1116

Installation (Mythware E-learning – Teacher)

Installation (Mythware E-learning - Student)

2010/5/1117

1. Confirm that the BIOS is burned with the classmate PC specific string:

• For Intel-powered classmate PC version 1.0: the classmate PC specific string will be integrated with the BIOS version higher than 1.03. In second generation Intel-powered classmate PCs, all BIOS versions will have the string integrated.

• Run winmsd and then make sure the System Model shows as Intel-powered Classmate PC or Intel-powered classmate PC.

Note: If the BIOS string does not exist, the installation will still run successfully;

however, it will run only after the e-Learning* license is registered to the student’s

computer.


InstallMythware E-learning - Student

2010/5/1118

2. Double-click the Mythware E-learning(student) installation program in the installation package. Select the language and then click OK.

Note: If there is already a version of the application in your system, it will be

uninstalled automatically before the new version is installed.


2010/5/1119

3. Click Next.

4. Select I accept the terms in the License Agreement and then click Next.


2010/5/1120

5. Select the installation folder and then click Next.

6. Select the item in the Start menu Shortcuts folder and then click Next.


2010/5/1121

7. Enter the required information in the Uninstall password and Confirm uninstall password text boxes. Click Next.

Note: The uninstall password text box can be left blank if a password is not required. If

used, the password length should be shorter than 32 characters.


2010/5/1122

8. Click Install.

9. Wait for the installation to complete.


2010/5/1123

10. Click Finish on the completion dialog.

11.Click Yes to restart the computer. The Mythware e-learning application will be installed in the classmate PC and run automatically as a background program after the OS starts.


2010/5/1124

Agenda

Pre-Training

Installation

How to Use

Uninstall

Q&A

2010/5/1125

Setup and Configure Network

Operate Mythware E-learning

2010/5/1126

Network topology is shown below:

2010/5/1127

1. Click wireless network connection in system tray area then the available wireless networks will pop-up.

Teacher Side:

Note: This is just an example for WINDOWS 7.

2010/5/1128

Teacher Side:


2. In the Wireless Network Connection window, click Refresh network list under Network Tasks to search for wireless networks.

2010/5/1129

Teacher Side:


3. Double-click the inputting wireless network that has a good connection indicator.

2010/5/1130

Teacher Side:


Student Side

Follow the same connection steps that were taken on the teacher’ s

computer. Make sure to connect to the same AP (rover) as that of the

teacher’s PC.

4. When the computer successfully connects to the network, the selected wireless network will show as Connected.

2010/5/1131

Setup and Configure Network

Operate Mythware E-learning

2010/5/1132

Teacher login

1. Double-click the Master Program icon on the desktop or click Start->All programs->Mythware->e-learning Class V6.0->Master Program.

2. The login dialog box will display.

Note: The teacher’s computer operating system account should be the administrator.

How to useOperate Mythware E-learning

2010/5/11 33

3. Enter the Teacher name, Login password, and then select the Class Model. Click Login. If the teacher’s PC hasn’t connected to the network, a warning message will display as below, Click OK.

Note: The default login password is blank when the teacher logs in for the

first time. After the teacher has set up a login name, the Class Model will jump to the session the teacher logged in the last time.

Teacher login


2010/5/11 34

If the teacher’s computer disconnects from the network, the main window will display as shown below, and the only active features that can be executed will be:

• Manage Class Model

• Net Movie

• Remote command

• Group Management

• Quiz Maker

• Quiz Grader

• Screen record

• Option


Main Window – Disconnected from the Network

2010/5/1135

System time

Local Volume Control

Function GroupStudents list

Other function

Message box

Event log

Title Bar

Main Window – Connected to the Network

When connected, the main window will display as shown below:


2010/5/1136

Main Window –Right Click Menu

Function button Exit current function

By right-clicking on a blank space in the Class Model area, the teacher can arrange icons or select students in the menu.


2010/5/1137


Function button

Align choice

• When the teacher right-clicks a student, the options in the first figure will display.

• When the teacher right-clicks two students, the options in the second figure will display. The teacher can also align icons.


2010/5/1138


By right-clicking on the Remote Message panel or Event logpanel, the teacher can select the options displayed in each panel.


2010/5/1139

Main Window – Default Message

If this button is checked all connected students will be blocked from sending messages to the teacher.

Teacher’s screen

Student’s screen

Note: If a student sends the same message more than four times in four seconds, the student will

be forbidden to send messages again for five seconds.


2010/5/11 40

Main Window – The Floating Bar on teacher’s PC

To minimize the class program, a floating toolbar can be displayed or

condensed at the top of the teacher’s screen.

This toolbar allows the teacher to perform common operations, including the following: 1. Screen Broadcast 2. Voice Broadcast 3. Electronic Pen 4. Screen Record 5. Monitor 6. File Distribution 7. Net Movie 8. Remote Shutdown 9. Remote Command 10. Options.

1 2 3 4 5 6 7 8 9 10

Show or Hide window CancelPress it to show the whole floating bar

Press it to condense the floating bar


2010/5/1141

Floating Bar

Tray Menu

Student Login

• The student application will automatically run after power-on.


2010/5/11 42

Main Window

When the student right/left-clicks the tray menu and then selects Show Floating Bar, the floating bar will display at the top of the student’s screen.

6. Send File(s) to teacher

Press it to show the whole floating bar

Press it to condense the floating bar

1 2 3 4 5 6 7

Set the student name

1. Connect to teacher

4. Raise a hand

5. Send a message to teacher

2. Disconnect from teacher

3. Register

7. Help

About the application

Show or hide floating bar


2010/5/11 43

Connection

To get started, the student clicks the button on the floating bar or right-clicks the tray menu and then selects Connect….

If the teacher’s PC and classmate PCs are connected within the same LAN, the teacher’s name will show in the Session List. The student selects the teacher and then clicks Connect. If the student is connecting to the teacher for the first time, the student should set his login name first.

Note: The student can’t use the same name as another classmate in the same class model. Set Name… is available when student is not connected to the teacher’s computer.


2010/5/1144

Connection

When a student attempts to connect to the teacher for the first time, a dialog box Pop-up on the Teacher side. Choose the student, then click Accept the student or click Deny to reject the student. Also you can press Accept All to accept all students at one time.

AcceptAccept All

Deny


2010/5/1145

Connection

If the Teacher accepts the student, the student will connect to the Teacher successful and display at Teacher main window as below.

If the student has connected successfully before, he doesn’t need to be accepted by Teacher.

When the student connected to the teacher successfully, you can do other functions that you want to now.


2010/5/1146

Function Group - Show

Show:

Screen Broadcast

Student Demonstration

Net Movie

Camera

The Function Group – Show include:

1.Screen Broadcast 2.Student Demonstration 3. Net Movie 4. Camera.


2010/5/1147


Screen Broadcast – teacher side: Click the function Screen Broadcast the

window will show as below.

Screen Broadcast Floating Toolbar

Bound window: you could know which area is shown at student

side.


2010/5/1148


Screen Broadcast - student side: If the student is in Screen Show Window mode, Right click on the window, there are some functions to use.

Auto Focus: The monitor will only show the part of screen image directly around the student’s cursor. When

the student moves his cursor to a new place, the image displayed on the monitor window will change.

Pan: The monitor will show part of a student’s screen. The teacher can manually move the image in the

monitor window to display different parts of the student’s desktop.

Zoom display: The student’s entire screen is scaled to fit in the teacher’s monitor window.

Auto Focus

Pan

Zoom display

Display the screen as full window

Show the screen window on the top


2010/5/1149

Screen Broadcast:


Screen Broadcast Floating Toolbar:

1. To display/Hide the main interface for the programs in the teacher-side computer.

2. To start or stop broadcasting voice to students

3. To open the Electronic Pen so that you can annotate the desktop

4. To record the broadcasted operation contents to a file

5. To adjust the screen broadcast’s picture quality. The picture qualities represented

by these four buttons are Highest, Higher, Normal, Low (from left to right).

6. To switch between the Full Screen mode and Windowed Mode

7. To show or hide the Bound window

8. To change the Screen Broadcast performance and its speed

9. To stop the broadcast.

1 2 3 4 5 6 7 8 9


2010/5/1150


Screen Broadcast:

1. Click on the icon broadcasting voice from the Screen Broadcast floating bar.

2. Right-click the icon of the student in the Class Model who is receiving the Screen Broadcast.

3. From the menu, select Start student’s talking

To select one student to speak to, do the following:

Note: you could only select one student to talk with, if you want to choose other student to talk and the currently student would be stopped talking.


2010/5/1151


Screen Broadcast:

To speak to all students, do the following step:

Click the icon broadcasting voice at the Screen Broadcast floating bar, and

the window will show as below.

broadcasting voice


2010/5/1152


Student Demonstration: Click the function Student Demonstration, the


Note: You should select one student to demonstration. The selected student will show the demonstration while the other students receive the demonstration.


2010/5/1153

Student Demonstration:


To select one student to remote control, do the following:

Right-click in the student’s demonstration window then Choose Remote Control. Please refer to Page 58 for more information.


2010/5/1154


Net Movie: Click the function Net Movie, the window will show as below.

Net Movie-Menu


2010/5/1155


Net Movie:

Menu:

If you want to suspend net movie you could press the Suspend button, there will be

a note of the suspend time.

If you want to start net movie at the suspend time, you could press Resume button.

If you want to clear the resume time, you could press Clear button.

Suspend

movie

name

Suspend

time

Suspend

net movie

Resume net movie

Clear the suspend setting


2010/5/1156


Camera: Click the function Camera the window will show as below.

Note: If there is no video device and audio device then a message will show as “Please select capture device from Options”.

Option


2010/5/1157


Camera:

Options:

Select the desired video device then change the video size and frame rate.

Select the desired audio device then change the audio input source and format.


2010/5/1158

Remote:

Monitor & Control

Remote Settings

Remote Command

Function Group -Remote

Remote includes:

1.Monitor & Control 2.Remote Settings 3. Remote Command.


2010/5/1159


Monitor & Control: Click the function Monitor & Control the window will show as below.

The student’s monitor window that

displays on your desktop

Monitor Control Floating Bar


2010/5/1160


Monitor & Control:

Monitor Control Floating Bar:

1. To display/hide the main interface for the programs in the teacher-side computer.

2. To show the Student Display of the previous screen

3. To show the Student Display of the next screen

4. To auto-toggle the screens and monitor each of the students in turn.

5. To rearrange the monitor windows.

6. To adjust the Monitor Image Display Mode (Auto Focus/Pan/Zoom display).

7. To stop the monitoring.

1 2 3 4 5 6 7


2010/5/1161


Monitor & Control:

Auto Focus: The monitor will only show the part of screen image directly around the

student’s cursor. When the student moves his cursor to a new place, the image displayed

on the monitor window will change.

Pan: The monitor will show part of a student’s screen. The teacher can manually move

the image in the monitor window to display different parts of the student’s desktop.

Zoom display: The student’s entire screen is scaled to fit in the teacher’s monitor window.

Note: If the mode is selected to monitor the students, you cannot remotely control the students.

Pan

Auto Focus Zoom

Auto-toggle


Monitor Control Floating Bar:

2010/5/1162

Monitor & ControlRemote Control: Right click the Monitor window of the student.


Set the display mode

Remote control the student


2010/5/1163

Monitor & ControlRemote Control: Right click the Monitor window of the student.


Remote control floating control bar

Monitor window Remote Control Window of student show at teacher desktop


2010/5/1164

Monitor & ControlRemote Control: Floating control bar.


To stop control:

Click the Stop control button in the floating control bar.

To control the student’s desktop in share mode:

If you want to share the desktop ,please uncheck the “Lock student” button in the

floating control bar. The default is check.

If you doesn’t want to share the desktop, please check the “lock student” button.

To annotate student’s screen while controlling the student’s desktop:

Check the “Electronic Pen” button in the floating control bar.

Stop control

Electronic Pen

Lock student

Note: You can also press the “Ctrl+Alt+F12” hotkey to stop control.


2010/5/1165


Remote Settings: Click the function Remote Settings the window will show as below.

Display:

To change students’

screen resolution

Note: As for the setting options, you can select/deselect an option by checking/unchecking

them. If nothing is done, the setting is ignored by default.

To change students’

color quality

To change the students’ display settings


2010/5/1166


Remote Settings:

Proxy Server:

This function allows you to change selected student’s Internet proxy server.

With this, you can allow multiple students to access the Internet with the same proxy address and port.

Proxy Settings


2010/5/1167


Remote Settings:

Themes:

This function allows you to change the themes for the selected student-side PC.

Theme Settings


2010/5/1168


Remote Settings:

Desktop:

This function allows you to change the desktop for the selected student-side PC.

Desktop settings


2010/5/1169


Remote Settings:

Screen Saver:

This function allows you to change the screen saver for the selected student-side PC.

Screen Saver Settings


2010/5/1170


Remote Settings:

Power Schemes:

This function allows you to change the power management for the selected student-side PC.

Power Schemes settings


2010/5/1171


Advanced Setting:

Remote Settings:

You can use it to change the students’ network repair mode, offline latency detection

period, volume control of the sound card, and the uninstall password for student-side computer programs

Volume Control

Network Settings

Set student side

uninstall password


2010/5/1172

Remote Command: Click the function Remote Command, the



To restart all students’ PC.

To shutdown all students’ PC.

To close all students’ applications

Manage Remote Command

Launch Local/Remote Application


2010/5/1173


Remote Command: Click the function Remote Command, you can choose

1. Remote Shutdown 2. Remote Reboot 3.Remote Close Applications.

If you check it, the student’s PC will be rebooted without any prompt.

Show the message before shutdown, you can display a short message on the students’screens for several seconds. The message can be customized.

Set the time


2010/5/1174


Remote Command: Click the function Remote Command, you can choose

4. Launch Local Applications 5. Launch Remote Applications.

Launch local Applications Launch Remote Applications


2010/5/1175

Function Group -Remote Function Group -RemoteRemote Command: Click the function Remote Command, you can choose

6. Remote Command….

Remote command allows the teacher to manage a remote command list. You can add, edit or delete commands in the command list.

Command list

Edit command


2010/5/1176

Function Group - Group

Group includes:

1. Group Chat

2. Group Teaching

3. Group Management.

Group:

Group Chat

Group Teaching

Group Management


2010/5/1177


Group Management: click the function Group Management and the window will show as below.

Create new group

Edit the group

Delete the group

Rename the group

Group list


Note: Before you do Group Chat or Group Teaching, you need do Group Management first.

2010/5/1178


Group Management:

New: Press New button to create Group.

Press it to add student

Group name


2010/5/1179


Group Management:

New-Add: Click Add… button to add students. At the Select Members window you can choose the student that you want to add, then click OK button.

Note: A student couldn’t be added into two groups.

Click Add…


Choose the students you want to add, then click OK button to add

2010/5/1180


Group Management:

New-Create: After you add students and enter the group name, click Create button you can close the Manage Group window.

Create

Group name

Close


2010/5/1181


Group Chat: Click the function Group Chat, and then the window will show as below.

To initiate Group Chat

To stop Group Chat

To Remove Group

To initiate all Groups ChatTo stop all Groups Chat

Message list

Send messageInput message

Current group

student list

Current group name

Note: Before you use this function, you should create group use the function Group Management first.


2010/5/1182


Group Chat:

Student Side:

Send messageInput message

Request talk in the group

Message listGroup student list

Group name


2010/5/1183


Group Teaching: Click the function Group Teaching and the window will show as below.

To initiate Group ChatTo start Group Chat

To Remove Group

To stop all Group ChatActive student

The function to demo The passive student list

Active monitor window

Update time of the monitor window

Note:

1. Before you use this function, you should create a valid group (the group must be 2 or more than 2 students) use the function Group Management.

2. Only two groups at most are allowed to run for the function (Broadcast Teaching, Monitor, Remote Control, Net movie).


2010/5/1184

Function Group - Quiz

Quiz includes:

1. Quiz Maker

2. Start Quiz

3. Quiz Grader

4. Instant Quiz.

Quiz:

Quiz Maker

Start Quiz

Quiz Grader

Instant Quiz


2010/5/1185


Quiz Maker: Click the function Quiz Maker, the window show as below.

The Quiz Maker allows the teacher to manage his quiz papers by creating or editing the quiz papers.

Change total

score

edit menu Quiz name:

Class:

Teacher name:

Duration:

Total score:


2010/5/1186


Edit Menu:

Quiz Maker:

To edit question group or questions

To create a new quiz paper

To add question group or questions

To delete questionsTo save the quiz paper

To open an existed quiz paper

About Quiz Maker


2010/5/1187

New : You can click New button to create a quiz paper. Click Add button or right click on the window to add question group/question.

Quiz Maker:


Note: You must add a question group before adding any question.

A quiz paper may include four types of questions described below:

1. One-answer question: questions which have only one correct answer.

2. Multi-answer question: questions which may have one or more correct answers.

3. Alternative question: questions with the answer of Yes or No.

4. Essay questions: no standard answers available.

New

Add


2010/5/1188


Quiz Maker:

Add: You can click Add then choose Add Question Group…or add Question or right click on the window to add question group.


2010/5/1189


Quiz Maker:

Add: Add One-answer Question…

To add a picture

Question Score

To delete the picture

Save the question and to add another question

Complete to add question

Question title

Question answer


2010/5/1190


Quiz Maker:

Add: Add Multi-answer Question…

To add a picture

Question Score



Question title

Question answer


2010/5/1191


Quiz Maker:

Add: Add Alternative Question…

To add a picture

Question Score



Question title

Question answer


2010/5/1192


Quiz Maker:

Add: Add Essay Question…

To add a picture

Question Score



Question title


2010/5/1193


Quiz Maker:

Edit: You can choose the Question Group or Question that you want to edit then click Edit button. Such as: Edit Question Group and Edit Multi-answer Question, After you edit the question, click OK button.

Figure-Edit Question

Figure-Edit Question Group

Group name


2010/5/1194


Quiz Maker:

Edit-Move Up/Down: click Edit menu then choose move up/down or right click on the quiz paper then choose move up/down.

You can move the question by use the function to move up/down


2010/5/1195


Quiz Maker:

Edit-Options:

You can choose the numbering mode for questions:•Numbering inside group•Numbering in whole Quiz paper


2010/5/1196


Quiz Maker:

Delete: You can choose the Question Group or Question that you want to delete then click Delete button at Start Quiz window.

Note: if you delete the Question Group, all the questions under that

group will be deleted.

To save the quiz paper

To delete the question group/ question

Save: after adding questions, click Save button to save the quiz paper.


2010/5/1197


Start Quiz: click the function Start Quiz, the window will show as below.

Open a quiz paper

Student status list


2010/5/1198


Start Quiz:

Open: click Open button at Start Quiz window to open a quiz paper which you have created.

Choose the quiz paper

Preview the quiz paper


2010/5/1199


Start Quiz:

Open-Preview: Press Preview button to preview the quiz paper.


2010/5/11100


Start Quiz:

After you open the quiz paper, the window will show as below.

Remaining time

Student state

Quiz information

Send the quiz paper to students

Student status list


2010/5/11101


Start Quiz:

Send: Click Send button at Start Quiz window to send the quiz paper to students. And the window will show as below.

Send the quiz

Stop the quiz

Start the quiz


2010/5/11102


Start Quiz:

Start: Click Start button at Start Quiz window to start the quiz paper. And the window will show as below.

Remaining time

Student Status:

Show how many questions

have been done by the

the student.

Pause the quiz


2010/5/11103


Start Quiz:

Start- Student Side: After you start the quiz, the student side will get the window as below.

Remaining time

Score

Questions

Paper info


2010/5/11104


Start Quiz:

Pause: Click Pause button at Start Quiz window to pause the quiz paper, you can click Start to continue. And the window will show as below.

Note: Teacher couldn’t close the quiz during the quiz or the quiz has not

been submitted by all the students.

Suspend


2010/5/11105

Start Quiz:

Suspend: Click Suspend button at Start Quiz window to suspend the quiz paper. Please follow the steps.


Resume the quiz


2010/5/11106

Start Quiz:

Resume: if you want to Resume the Quiz you can press Resume button at start quiz window. And the window will show as below.


Select the Suspended quiz

that you want to resume,

then press OK button

Delete the Quiz

Note: You could choose only one quiz from the quiz list to resume.


2010/5/11107

Start Quiz:

Stop: if you want to stop the quiz, you can click Stop button at start quiz window. And the window will show as below.


Note: When the quiz time is running out, the system will automatically collect the quiz paper.

Grade


2010/5/11108

Function Group – Quiz Grader

Quiz Grader: click the Function Quiz Grader, the window will show as below.

Open: Click Open button to open the finished quiz.

Open

Grade Paper list: Choose one finished quiz from the Quiz Grader list then press OK.


2010/5/11109

Quiz Grader:

Grade Paper:


In the Quiz Grader dialog, to move to the first subjective question (essay question)and if there is no essay question the button show as grey.

Add Comment here

Comment

Grade status


2010/5/11110

Grade Status:

There are three types of student grade status:

Not graded: indicating that the teacher has not opened and graded the student’s quiz paper.

Grading: the teacher is grading the student’s quiz paper. The total number of questions and

the number of questions which have been graded are displayed in the student list: For example, Grading(7/9).

Graded: the teacher has finished the grading for that student’s quiz paper.

Click Save button to save the grade paper.

Note: if there are still students who are not graded, the Send button shows as grey

Send the grade paper to students

Save the grade paper


Quiz Grader:


2010/5/11111

Send: if you want to send the grade to students, you can select the students and then click Send button at start quiz window.

There are three types of student status in total, as described below:

Not ready: indicating that the student is offline and cannot receive the sent results. At this time the check box in front of the Student name will be displayed as grey, a state which cannot be selected

Graded: indicating that the student is online and ready to receive the grading results. At this time the check box in front of the student name will appear as a selectable status.

Sent: indicating that the student’s grading results

have been sent and no need to send again. The check box in front of the student name will appear as grey, a state which cannot be selected.


Quiz Grader:


2010/5/11112


Quiz Grader:

At the student-side, it will display a html page, showing the teacher’s grading results.

The grading results is saved at “C:\Documents and Settings\My

Documents\Administrator\e-Learning Class V6.0\Quiz\Paper” at student-side.

The correct answer will show here (except the essay question)


2010/5/11113

Instant Quiz: click the function Instant Quiz, the window will show as below.


The Instant Quiz function allows the teacher to test the students’ skills with one single question and get the students’ answers immediately.

The teacher can also use this Instant Quiz function to do some surveys.

Three question types

Survey/Vote (no results)

Start the Quiz

Duration time Remaining time

Quiz result list


2010/5/11114

Question:


Instant Quiz:

A quiz paper can have three types of questions:

One-answer questions: questions which have only one correct answer.

Multi-answer questions: questions which may have one or more correct answers.

True or False questions: questions with the answer of Yes or No.

If the teacher want to do a survey, just click the check box in front of Survey/Vote

in the Instant Quiz dialog. The questions may have no fixed answers.

Survey/Vote (no results)

Three question types


2010/5/11115

Grade:

Function Group - QuizInstant Quiz:

show the resultNot show the result

If the question is for Survey/Vote only, there should be

no Results column displayed in the list.


2010/5/11116

Others includes:

1. Screen Record

2. File Distribution

Function Group - Others

Others:

Screen Record

File Distribution


2010/5/11117


Screen Record: please fellow steps to use the screen record function.

Click the function Screen Record, one window will pop up to ask you where to save the file first. Set the name and the path where you want to save, then click Save button to begin the screen record.

Save as the path

Set the name


2010/5/11118


Screen Record:

When the screen record starts, the floating bar will show at the top window of teacher side.

1. To display/hide the main interface for the programs in the teacher-side computer.

2. To call Electronic Pen while performing the Screen Record function, and add annotations to the screen.

3. To continue the screen recording operations.

4. To pause the current screen recording operations.

5. To stop the screen recording operations.

6. Indicating that the recording is in progress, with the recording time shown.

1 2 3 4 5 6


2010/5/11119


Screen Record:

When you stop the screen record, a window will pop up to show you that you can playback or broadcast the recorded files by Net Movie. Click OK to complete the screen record.


2010/5/11120


File Distribution: Please follow steps to use this function.

Click the function File Distribution, the window will show as below.

Option

Add

File list


2010/5/11121


File Distribution:

Click Send to distribute the file or click “▼” then choose Send to Folder…, select the remote destination folder path on student side.

File list


2010/5/11122

File Distribution:

Click the Option, the window will show as below.


To add a new predefined directory

To edit an existing predefined directory

To delete an existing macro target directory

The tab of Replace


2010/5/11123

File Distribution:

Click the Option- Replace tab, the window will show as below.


The file will replace if you check it.

The file will not replace if you check it.


2010/5/11124


File Distribution-Student side:

Student side – Right click

the icon in the taskbar tray.

add a folder into listDelete files or

folder in listadd a folder

into list Submit start Submit stop


2010/5/11125


File Distribution-Teacher side:

When the students start the file submission, a received window will pop up at teacher side . You can accept or deny it.


2010/5/11126

other functions

Function Group – Other function

Other functions include:

1. Class Model

2. Power Status

3. Student Register

4. Silence/Silence Off

5. Lock/Unlock all students in Class Model

6. Views


2010/5/11127

Class Model: Click the button Class model, the widow will show as a class model window.


Manage Class model

Class model window

Create class model

Edit class model

Delete class model

Active class model

Export class model

Save As class model


2010/5/11128

Class Model-New: Click New button to create a new class model.


Choose the student from “Available student list”, then move to “Selected student list”, then click OK.

Available student list

Selected student listMove to left

Move to right

Class Model name

OK


2010/5/11129


Class Model-Delete: you can delete class model by click delete button.

Class Model-Edit: Click Edit button to Edit class model.

Note: 1. if the class model is activated, you can’t delete it. 2. And the Public class mode couldn’t be deleted whether it is active or

not active.


2010/5/11130


Class Model-Active: Choose one class model then click Active.

When the teacher logs in, the activated class model would be used default.

The class mode is activated


2010/5/11131

Power Status: if you check the Power Status button, the power status will show on the student icon.


Power Status

if you view as Report, you can’t know the power status and the buttons show as grey.

Move mouse onto the icon, information will show

Student power by use battery

Student power by insert adapter


2010/5/11132


Silence/Silence Off: if you click the button Silence/Silence Off, the icon will show as below.

Silence Silence Off

Silence Silence Off


2010/5/11133


Lock/Unlock: if you check the button Lock, all the students could not disconnect from the teacher.

If the student has already connected to the teacher successfully, the teacher would force the student to connect to the teacher automatically.

Lock/Unlock button


2010/5/11134


View: Click the View button, choose Icon or Report


2010/5/11135

Option

You can click the Option button to open the option setting window.

Option

View Help

Close the program

Minimize the main window


2010/5/11136

Option

Screen Display Broadcast

Set the performance and resolution

of the screen broadcast and screen

record.

Set automatically start recording or

not and the saved directory of

screen record.

Some Normal Screen Broadcast

settings.


2010/5/11137

Option

Voice

Audio setting.

Voice Broadcast, and Voice Chat options.


2010/5/11138

Option

Video

Set the buffer about Net

Movie, Live Broadcast to

make the teaching better.

Net Movie, and Live Broadcast

options.


2010/5/11139

Option

Monitor Student Activities

Monitor settings


2010/5/11140

Option

Settings for screen recording

Screen Record

Set the Quality

Record options


2010/5/11141

Option

Hold Student Activities

Set the background color and text

show at student side when you use

the silence function


2010/5/11142

Option

Receive File Options

Students’ submit files options.

Set the limitation about

Students’ submit files.


2010/5/11143

OptionNetwork

Bind address and Offline detect.

Network settings for better

performance.

Default Network setting of

different network.


2010/5/11144

Option

Hotkey

You can set some

Hotkey as you like

here


2010/5/11145

Option

Password

Teacher side – Right click the

icon in the taskbar tray.


2010/5/11146

Option

Class Session Option

If you check it, Lock all

students to class model upon

setup


2010/5/11147

Option

General

Student side – Right click the

icon in the taskbar tray.

Set the Hand Raise\Remote message\Student session settings at General option.

The student would show the state as the setting when they use the function.


2010/5/11148

Agenda

Pre-Training

Installation

How to Use

Uninstall

Q&A

2010/5/11149

Uninstall (Mythware E-learning – Teacher)

Uninstall (Mythware E-learning - Student)

2010/5/11150

1. Click “start” -> “All Programs” -> “Mythware”-> “e-learning Class V6.0” then

choose “Uninstall e-Learning Class”.

UninstallMythware E-learning - Teacher

2. Click Yes to start uninstall process.

2010/5/11151

Completing this process will complete the removal of the Mythware

E-learning - Teacher from the Teacher PC.

3. Wait for this process to complete, then click Yes to restart the computer.

UninstallMythware E-learning - Teacher

2010/5/11152

Uninstall (Mythware E-learning – Teacher)

Uninstall (Mythware E-learning - Student)

2010/5/11153

1. Open Control Panel and “Add or Remove Programs”, find the “e-Learning

Class V6.0” then click the button Remove.

UninstallMythware E-learning - Student

2010/5/11154

2. Click Yes to proceed.


3. Enter the uninstall password, then press “OK” to proceed.

2010/5/11155


Completing this process will complete the removal of the Mythware

E-learning - Student from the classmate PC.

4. Wait the proceed to complete. then click Yes to restart the classmate PC.

2010/5/11156

Agenda

Pre-Training

Pre-installation Check

Installation

How to Use

Uninstall

Q&A

User Manual

Issue:

Some content in USER MANUAL is not consistent with new features added for Windows 7 Operating System.

Impact:

Customers may not find out those new features’ description in USER MANUAL

Solution:

No solution.

2010/5/11157

Q&A

2010/5/11158

File Transfer

Issue:

All students will not receive file(s) sent out by teacher while one or more student(s) disconnect from network.

Impact:

As issue title

Workaround:

No workaround

Solution:

Teacher could see ERROR BOX while file(s) have not been successfully received by students. After those disconnected student(s) reconnect to network, teacher could re-send file(s) to all students.

Q&A

2010/5/11159

Silence Mode

Issue:

Student(s) could escape from Silence mode while clicking Fn+F1 to disable wireless network, clicking Fn + F2 to enter into standby, and even pushing power button to shutdown.

Impact:

As issue title

Workaround:

No workaround

Solution:

Teacher will see while student(s) escape from Silence mode. And while those student(s) reconnect to network, they will be enter Silence mode automatically (after teacher enable locking class)

Q&A