classic line - fn-iq.comfn-iq.com/wp-content/uploads/2014/03/fritsch.pdf · Planetary Mill PULVERISETTE 5 classic line Planetary Mono Mill ... results down to colloidal fineness of

classic line

I D E A L F O RGEOLOGY AND MINERALOGYCERAMICSCHEMISTRYBIOLOGYPHARMACEUTICALSMETALLURGYMATERIAL TECHNOLOGYSAMPLE PREPARATION FOR ANALYSIS

FRITSCH · PLANETARY MILLS classic line

2

The FRITSCH family business is an internationally respected manufacturer of

application-orientated laboratory instruments. In 1961 FRITSCH applied for a

world wide patent for the first Laboratory Planetary Mill. In 1996 FRITSCH also

patented the first ever Planetary Mill with only one working station (Mono Mill).

Since then FRITSCH Planetary Mills have become the standard in industry and

research laboratories worldwide.

FRITSCH classic line

THE LABORATORY STANDARD

A D VA N TA G E S T O Y O U O F T H E F R I T S C H C L A S S I C L I N E AT A G L A N C E :

•Fastgrindingtobelow1µm

•Upto800rpm

•SafeclampingofthebowlswiththeSafe-Lock-System

•Simple,ergonomichandlingandeasycleaning

•Grindingbowlsandballsin8differentmaterialstosuitallneedsand

avoidanceofcontaminationthroughabrasion

F R I T S C H . O N E S T E P A H E A D .

3

W O R L D W I D E S TA N D A R D

Worldwide, FRITSCH Planetary Mills of the classic line are

the laboratory standard for the widest range of applications.

The name PULVERISETTE is synonymous with fast, loss-

free fine grinding of samples, operator friendly, consistent

reproducibility and long, reliable service life even under

continuous, heavy duty usage.

All classic line Planetary Mills are characterised by

particularly easy, ergonomic operation, offer fast and easy

cleaning and guarantee safe clamping of the bowls.

Depending on the fineness required, the grinding can be

performed dry, in suspension or in inert gas. In addition

to comminution, you can also use the Planetary Mills of

the FRITSCH classic line for mixing and homogenising

of emulsions and pastes or for mechanical alloying and

activation in material research.

Select with confidence the right option for your special needs

from the unique FRITSCH classic line -range of Planetary Ball

Mills!

Planetary Ball Mills – high-performance all-rounders in routine

laboratory work

In Planetary Ball Mills, the comminution of the material to be

ground takes place primarily through the high-energy impact of

grinding balls. To achieve this, the grinding bowl, containing the

material to be ground and grinding balls, rotates around its own

axis on a main disk whilst rotating rapidly in the opposite direction.

At a certain speed, with this configuration, the centrifugal force

causes the ground sample material and grinding balls to separate

from the inner wall of the grinding bowl. The grinding balls then

cross the bowl at high speed and further grind the sample

material by impact against the opposite bowl wall. In addition

impact between the balls themselves on

the sample material adds to the size

reduction process.

Specific application examples

and a table with grinding results

can be found at www.fritsch.de

Working principle of Planetary Ball Mills

PuLveRISeTTe 6

Mov

emen

tof

the

supp

ortin

gdi

sk

Rotation of thegrinding bowl

Planetary Mill PULVERISETTE 5 classic linePlanetary Mono Mill

PULVERISETTE 6 classic linePlanetary Micro Mill

PULVERISETTE 7 classic lineVario-Planetary Mill

PULVERISETTE 4 classic line

Fast and fineHigh performancein minimum space

Ideal for the smallest quantities Unique a variable transmission ratio

Working principle Impact force Impact force Impact force Impact force Impact force

Number of working stations 4 2 1 2 2

Grinding bowl sizes 80, 250, 500 ml 80, 250, 500 ml 80, 250, 500 ml 12, 45 ml 12, 45, 80, 250, 500 ml

Grinding ball diameter 0.5 – 40 mm 0.5 – 40 mm 0.5 – 40 mm 0.5 – 15 mm 0.5 – 40 mm

Max. feed size (depending on the material) 10 mm 10 mm 10 mm 5 mm 10 mm

Min. sample quantity 10 ml 10 ml 10 ml 0.5 ml 0.5 ml

Max. sample quantity 900 ml 450 ml 225 ml 40 ml 450 ml

Final fineness < 1 µm < 1 µm < 1 µm < 1 µm < 1 µm

Typical grinding time down to analytical fineness 4 min 4 min 4 min 3 min 4 min

Grinding process Dry/wet Dry/wet Dry/wet Dry/wet Dry/wet

Grinding in inert gas Yes Yes Yes Only possible in glove box Yes

Gas pressure and temperature measurement Yes Yes Yes No Yes

Rotational speed of main disk 50 – 400 rpm 50 – 400 rpm 100 – 650 rpm 100 – 800 rpm 0 – 400 rpm

Transmission ratio grinding bowl/planetary disk

i relative

= 1 : –2.19 i relative



= 1 : –2 variable

Effective diameter of main disk ~ 250 mm ~ 250 mm 121.6 mm 140 mm ~ 250 mm

Centrifugal acceleration (g = 9.81 m/s2) 22 g 22 g 29 g 50 g 22 g

Electrical details100-120/200-240 v/1~,

50-60 Hz, 1300/1600 watt100-120/200-240 v/1~,

50-60 Hz, 1300/1600 watt100-120/200-240 v/1~,

50-60 Hz, 1100 watt100-120/200-240 v/1~,

50-60 Hz, 880 watt400 v/3~,

50-60 Hz, 6000 watt

Motor shaft power in accordance with VDE 0530, EN 60034

1.5 kW 1.5 kW 0.75 kW 0.37 kW 2.2 kW supporting disk,2.5 kW planetary disk

Weight Net: 120 kg, gross: 155 kg Net: 100 kg, gross: 135 kg Net: 63 kg, gross: 83 kg Net: 35 kg, gross: 55 kg Net: 320 kg, gross: 380 kg

Dimensions w x d x h Bench top instrument: 58 x 67 x 57 cm Bench top instrument: 58 x 67 x 57 cm Bench top instrument: 37 x 53 x 50 cm Bench top instrument: 37 x 53 x 50 cm Floor instrument: 60 x 80 x 110 cm

Packing details Pallet case: 100 x 72 x 83 cm Pallet case: 100 x 72 x 83 cm Wooden case: 68 x 54 x 72 cm Wooden case: 68 x 54 x 72 cm Wooden case: 85 x 85 x 140 cm

4


THE PROGRAMME

4 working stations 2 working stations

Planetary Mill PULVERISETTE 5 classic linePlanetary Mono Mill

PULVERISETTE 6 classic linePlanetary Micro Mill

PULVERISETTE 7 classic lineVario-Planetary Mill

PULVERISETTE 4 classic line

Fast and fineHigh performancein minimum space

Ideal for the smallest quantities Unique a variable transmission ratio

Working principle Impact force Impact force Impact force Impact force Impact force

Number of working stations 4 2 1 2 2

Grinding bowl sizes 80, 250, 500 ml 80, 250, 500 ml 80, 250, 500 ml 12, 45 ml 12, 45, 80, 250, 500 ml

Grinding ball diameter 0.5 – 40 mm 0.5 – 40 mm 0.5 – 40 mm 0.5 – 15 mm 0.5 – 40 mm

Max. feed size (depending on the material) 10 mm 10 mm 10 mm 5 mm 10 mm

Min. sample quantity 10 ml 10 ml 10 ml 0.5 ml 0.5 ml

Max. sample quantity 900 ml 450 ml 225 ml 40 ml 450 ml

Final fineness < 1 µm < 1 µm < 1 µm < 1 µm < 1 µm

Typical grinding time down to analytical fineness 4 min 4 min 4 min 3 min 4 min

Grinding process Dry/wet Dry/wet Dry/wet Dry/wet Dry/wet

Grinding in inert gas Yes Yes Yes Only possible in glove box Yes

Gas pressure and temperature measurement Yes Yes Yes No Yes

Rotational speed of main disk 50 – 400 rpm 50 – 400 rpm 100 – 650 rpm 100 – 800 rpm 0 – 400 rpm

Transmission ratio grinding bowl/planetary disk

i relative




= 1 : –2 variable

Effective diameter of main disk ~ 250 mm ~ 250 mm 121.6 mm 140 mm ~ 250 mm

Centrifugal acceleration (g = 9.81 m/s2) 22 g 22 g 29 g 50 g 22 g

Electrical details100-120/200-240 v/1~,

50-60 Hz, 1300/1600 watt100-120/200-240 v/1~,

50-60 Hz, 1300/1600 watt100-120/200-240 v/1~,

50-60 Hz, 1100 watt100-120/200-240 v/1~,

50-60 Hz, 880 watt400 v/3~,

50-60 Hz, 6000 watt


1.5 kW 1.5 kW 0.75 kW 0.37 kW 2.2 kW supporting disk,2.5 kW planetary disk

Weight Net: 120 kg, gross: 155 kg Net: 100 kg, gross: 135 kg Net: 63 kg, gross: 83 kg Net: 35 kg, gross: 55 kg Net: 320 kg, gross: 380 kg

Dimensions w x d x h Bench top instrument: 58 x 67 x 57 cm Bench top instrument: 58 x 67 x 57 cm Bench top instrument: 37 x 53 x 50 cm Bench top instrument: 37 x 53 x 50 cm Floor instrument: 60 x 80 x 110 cm

Packing details Pallet case: 100 x 72 x 83 cm Pallet case: 100 x 72 x 83 cm Wooden case: 68 x 54 x 72 cm Wooden case: 68 x 54 x 72 cm Wooden case: 85 x 85 x 140 cm

5

Free FRITSCH-sample grinding! Send us your samples - we will advise you which mill is the right one for you.

Or take a look in the practical grinding report database by logging on

www.fritsch.de select menu item Sample Preparation / Solutions.

F A S T A N D F I N E

The ideal Planetary Mill: Quick and reliable thanks to the

particularly high-energy effect of the grinding balls, the

PuLveRISeTTe 5 classic line delivers loss-free grinding

results down to colloidal fineness of dry laboratory samples

or solids in suspension and even mixes and homogenises

emulsions and pastes. The fixed transmission ratio, rotational

speed regulation and precision quartz timing ensure exactly

reproducible grinding conditions.

6

T H E F R I T S C H P L A N E TA R Y M I L L

P U L V E R I S E T T E 5 classic line


Also available: The p-5 classic line with 2 working stations

•Fastcomminutionoflaboratorysampleswithupto400rpm

•Adjustabletimeraccuratetoonesecond

•Suitableforgrindinghardtosoftmaterials,includinginsuspensions

•Perfectforhomogenisingofemulsionsandpastes

•4or2workingstations

•Simultaneousprocessingofupto8samples

•Usefulcapacityupto4x225ml

•Bowlsizes80ml,250ml,500mlvolume

7

Fast and reliable: The practical Safe-Lock-System

TECHNICAL DATA

Electrical details 100-120/200-240 v/1~, 50-60 Hz, 1300/1600 wattMotor shaft power in accordance with VDE 0530, EN 60034 1.5 kWWeight with 4 working stations 2 working stationsNet 120 kg 100 kgGross 155 kg 135 kgDimensions w x d x h Bench top instrument: 58 x 67 x 57 cmPacking w x d x h Pallet case: 100 x 72 x 83 cmEmissions value of workplace according to IEC 61672-1up to approx. 83 dB(A) (depending on the material to be ground, grinding bowls/balls, selected

rotational speed)

Order no. for 4 working stations 2 working stations 05.5000.00 05.6000.00

FACTS AND ADVANTAGES

• Toothed belt drive for bowls provides constant transmission ratio

• Rotationalspeedregulatedbymicroprocessor

• Digitaldisplayoftheactualrotationalspeedofthesupportingdisk

• Programmablegrindingandbreaktimesandgrindingsequences–forshort-timeoperationadjustabledowntothesecond

• Smallergrindingbowlsalsopossiblewithanadapter

• RS232interfacefortransmissionofprocessparameters(validation)

• Reversingfunction

• Overloadprotectionwithautomaticrotationalspeedadjustmentanddisplay

• Maintenance-freedriveduetoelectronicallyregulatedrotarycurrentmotor(1.5kW)withfrequencyconverterandpermanentlylubricatedbearings

• Grindingchamberhoodsafetylockwithstoppagemonitoring

• Membranekeyboard

• Robusthousingofimpact-resistantplastic

• Grindingchamberwithforcedairventilation

• Gaspressuredspringsforeasyopeningofthecover

• Energy-save-function(electricity-savingmode)

• CertifiedsafetyCE

• 2-yearguarantee

GTMcompatibleGTM

INF

OR

MAT I O N PA G E 1

4/

15

Saves time: Simultaneous grinding of up to 8 samples

Geology and mineralogy Rock, gravel, sand, minerals

Ceramics Porcelain, sintered ceramics, clay, fireclay

Chemistry Pesticides, fertilisers, salts,

inorganic and organic materials

Biology Plants, leaves, freeze-dried samples

Pharmaceuticals Ophthalmological agents, gels, creams, extracts,

drugs, pastes, dragées, tablets

Metallurgy Ores, sinters

Material technology Pigments, precious materials, new materials,

alloys, mechanical alloying and activating

Analysis preparation Spectroscopy, X-ray fluorescence,

X-ray structure analysis, chromatography

APPLICATION EXAMPLES

H I G H P E R F O R M A N C E I N

M I N I M U M S P A C E

The PuLveRISeTTe 6 classic line is a high-per formance

Planetary Ball Mill with a single grinding bowl mount and

practical,easilyadjustableimbalancecompensation.

Advantage to you: Particularly easy use and high-energy

effect up to 650 rpm. This ensures a constantly high grinding

performance with extremely low space requirements for loss-

free grinding results even in suspension.

The electronic timer adjustable to one second and the

programmable, automated reversing feature ensure precise,

consistent reproducibility and grinding of even the smallest

samples. At the same time, the PuLveRISeTTe 6 classic line

is ideally suited for mechanical alloying or for mixing and

perfect homogenising of emulsions and pastes.

8



T H E F R I T S C H P L A N E TA R Y M O N O M I L L

•Specialgrindingforceduetoarotationalspeedofupto650rpm

•Lowspacerequirementsandergonomicdesign

•Particularlyeasy-to-use

•Timerprogrammingpreciseto±onesecond

•Suitableforgrindinghardtosoftmaterials,dryorinsuspension

•Perfectmixingandhomogenisingofemulsions


•Usefulcapacityupto225ml

•Bowlsizes80ml,250mland500mlvolume

9

Imbalance compensation with simple mechanicaladjustment

TECHNICAL DATA

Electrical details 100-120/200-240 v/1~, 50-60 Hz, 1100 wattMotor shaft power in accordance with VDE 0530, EN 60034 0.75 kW Weight Net 63 kgGross 83 kgDimensions w x d x h Bench top instrument: 37 x 53 x 50 cmPackaging w x d x h Wooden case: 68 x 54 x 72 cmEmissions value of workplace according to IEC 61672-1up to approx. 85 dB(A) (depending on the material to be ground, grinding bowls/balls, selected

rotational speed)

Order no.06.2000.00

Practical: The membrane keyboard can be operated when the mill is closed














• Large rotational speed range with accurate display

• Grindingchambercompletelyencapsulatedbuteasytoopen

• Coolingofthegrindingchamberwithabuilt-infanforlonggrindingtimes

• Exactlyreproduciblegrindingresultsthankstoaregulateddrive,precisetransmissionratio(toothedbelt),programmablemicroprocessorcontrolelectronics

• Programmableintervalandbreaktimes

• Smallergrindingbowlsalsopossiblewithanadapter

• RS232interfaceforoutputtingprocessdata(validation)

• Monitoringofthegrindingparametersevenwhengrindingchamberisopenthroughanergonomicallypositionedandalwaysvisible,splash-proofIP65membranekeyboard

• Easycleaningofthegrindingelements

• Recyclableplastichousing

• Extensiverangeofaccessories


• Mainsvoltage(100-120/200-240V)configurableattheinstrument


• 2-yearguarantee

GTMcompatibleGTM

INF

OR

MAT I O N PA G E 1

4/

15


I D E A L F O R S M A L L E S T Q U A N T I T I E S

The PuLveRISeTTe 7 classic line is ideally suited to fast,

uniform, and extremely fine comminution of very small

samples down to colloidal fineness or for mixing and per-

fect homogenisation of emulsions or pastes.

The special microprocessor control with up to 99 programm-

able repetitions of the grinding cycle ensures exceptionally

fast, precise, reproducible results. A mill that combines

particularly high grinding performance with low bench

space requirements!

10



T H E F R I T S C H P L A N E TA R Y M I C R O M I L L

•Rotationalspeedupto800rpm

•Fastfinegrindingofsmallquantities

•Smallfootprint

•Programmablemicroprocessorcontrol

•Upto99repetitionsofthegrindingcycle

•Suitableforgrindinghardtosoftmaterials,includinginsuspension


•Usefulcapacityupto2x20ml

•Grindingbowlsizesof12and45mlvolume

11

TECHNICAL DATA

Electrical details 100-120/200-240 v/1~, 50-60 Hz, 880 wattMotor shaft power in accordance with VDE 0530, EN 60034 0.37 kWWeight Net 35 kg Gross 55 kgDimensions w x d x h Bench top instrument: 37 x 53 x 50 cmPackaging w x d x h Wooden case: 68 x 54 x 72 cmEmissions value of workplace according to IEC 61672-1 up to approx. 82 dB(A) (depending on the material to be ground, grinding bowls/balls, selected

rotational speed)

Order no. 07.4000.00














• Large rotational speed range

• Grindingchambercompletelyencapsulatedbuteasytoopen

• Coolingofthegrindingchamberwithabuilt-infanforlonggrindingtimes

• Programmablemicroprocessorcontrol

• Preciserotationalspeedregulationwithdisplayofset/actualvalues

• Programme-timerforgrindingoperationandcoolingphases



• RS232interfaceforoutputofprocessdataandprogrammingofgrindingcycles

• ErgonomicIP64membranekeyboard

• Maintenance-freedrivewithasynchronousmotorandfrequencyconverter

• Mainsvoltage(100-120/200-240V)configurableontheinstrument

• Recyclableplastichousing


• 2-yearguarantee

Impressive: Fast and fine grinding of smallest quantities

unbeatably fast: Rotational speed up to 800 rpm


U N I Q U E : W I T H VA R I A B L E

T R A N S M I S S I O N R AT I O

In contrast to conventional Planetary Mills, the rotational

speed of the grinding bowls and supporting disk can be

configured separately in the PuLveRISeTTe 4 classic line.

Advantage to you: A single mill for mechanical activating

and alloying providing optimum grinding conditions suited

to the respective material to be ground and the size of

the grinding bowls and balls! For results that cannot be

achieved with other Ball Mills.

The mill is controlled by integral software, in which up to

9 programmes can be saved and then loaded quickly and

easily via the mill display.

How the variable PULVERISETTE 4 classic line functions

You can directly influence the movement and paths of the grinding

balls by varying the transmission ratio between the grinding bowls

and supporting disk: Depending on the setting, you can obtain high

impact energy or high friction, according to your needs, or have

your PuLveRISeTTe 4 classic line operate as a Centrifugal Mill.

You are free to choose all intermediate levels and combinations

between friction-based and impact-based comminution. This

makes the mill uniquely versatile.

12



Particularly versatile: The FRITSCH grinding bowl programme

T H E F R I T S C H VA R I O - P L A N E TA R Y M I L L

•Flexibleconfigurablegrindingconditions:impactand/orfriction

•Rotationalspeedupto400rpm

•Idealformechanicalalloyingandactivating


•Speciallysuitedformaterialresearchanddevelopmentapplications

•Ultimatefinenessdownto0.1µm

•Usefulcapacityof2x0.5mlto2x225ml

•Bowlsizes12ml,45ml,80ml,250mland500mlcapacity





Chemistry Insecticides, fertilisers, salts,





Metallurgy Ores, Sinters



13


• Free programming of the grinding parameters, incl. grinding and break times and grinding cycles through PC software

• Real-timedisplayoftherotationalspeedformonitoringofthegrindingprocess

• WINDOWS™controlandevaluationprogramme


• Forcedairventilationofthegrindingchamber

• Safetyinterlockofthegrindingchamberwithstandstillmonitoring

• Overloadprotectionthroughrotationalspeedadjustment

• Maintenance-freedrive

• Faultfreelongservicelifeduetohigh-performancebeltdrivesandpermanentlylubricatedbearings

• Robuststeelhousing,service-friendlydesign

• Membranekeyboard


• 2-yearguarantee

The PuLveRISeTTe 4 grinding in inert gas

TECHNICAL DATA

Electrical details 400 v/3~, 50-60 Hz, 6000 wattMotor shaft power in accordance with VDE 0530, EN 60034 2.2 kW supporting disk 2.5 kW planetary diskWeight Net 320 kg Gross 380 kgDimensions w x d x h Floor instrument: 60 x 80 x 110 cmPackaging w x d x h Wooden case: 85 x 85 x 140 cmEmissions value of workplace according to IEC 61672-1 up to approx. 81 dB(A) (depending on the material to be ground, grinding bowls/balls, selected

rotational speed)

Order no. 04.1030.00


GTMcompatibleGTM

INF

OR

MAT I O N PA G E 1

4/

15

compatibleGTMGTM

This Gas Pressure and Temperature Measuring

System developed in cooperation with the

Fraunhofer Institute for Applied Material Research

(IFAM) in Dresden, is for use with the Planetary

Mills PULVERISETTE 4, PULVERISETTE 5 and

PULVERISETTE 6 of the FRITSCH classic line

transform them into analytical measurement

systems.

Through the continuous direct measurement of gas pressure

and temperature, it is possible to monitor thermal effects

as well as physical and chemical reactions or pressure

variations within the grinding bowl. To achieve this, the

grinding bowl is simply used with a radio transmitter located

in the lid, without any modification to the mill itself. The

monitored data is passed by a receiver to a computer

running a special WINDOWSTM programme and allows for

graphical presentation of the measurement values and

collating them in an excelTM table.

14

GTM - Gas Pressure and Temperature Measuring System


•ForusewithPULVERISETTE4,PULVERISETTE5andPULVERISETTE6

•DataevaluationviaPC

•Rangeofpressurebuildupto15m

•Operatingtimewithfullychargedbatteryapprox.80h

•Adaptationofthemeasurementratetothesignaldynamicformaximumpossible

batterylife

•Sleepmodeoftheradiotransmitterwithconsistentmeasurementsignals

Y O U R A D VA N TA G E S W I T H G T M

The GTM-System can be used wherever batch quantities are

ground in a totally enclosed container. Special grinding bowls

made of stainless steel in capacities 250 ml and 500 ml are

available.

The GTM-System provides valuable information

- Investigations in the area of mechanical alloying for the

production of new amorphous and nano-crystalline materials

- Monitoring and optimisation of grinding processes in industrial

applications

Through measurement of the grinding bowl temperature, it is

possible to make an integral statement on temperature as a

process variable that takes account of the effects of all friction,

impact and transformation processes. The continuous and highly

sensitive measurement of the gas pressure in the grinding bowl

allows the detection of very rapid reactions. The measured gas

pressure describes, amongst other things, the interactions of

the gas with the surfaces created during grinding (adsorption

and desorption of gases).

extremely rapid phase formations can for the first time be

observed IN SITu as an adiabatic process without heat

exchange from the system.

Adjustmentofthegrindingparametersrotationalspeed,balls/

sample material ratio and grinding time can be performed first

time without expensive, time-consuming and abortive trials.

Due to precise measurement of reaction times, for example,

new materials can be prepared through specific addition of

reaction partners, or produced with special mechano-chemical

properties.

15

TECHNICAL DATA

• System requirements: Standard WINDOWSTM-PC

• UHFradiotransmitter,10mW,noapprovalorfeesnecessary

• Uptotwotransmittercomponentscanbeoperatedsimultaneouslyinthemill

• Measurement rate for single and dual transmission operation of up to

approx. 200 measurement value/s

• Pressuremeasurementrange0to800kPa(8bar)

• Temperaturemeasurementrangeofthetransmittercomponent10to70°C

• Resolutionofpressuresignal:<0.024kPa

• Resolutionoftemperaturesignal:0.025K

• Permissibletransient(-2s)heatofreaction30kJ

• Receivercomponentalsofunctionsaschargingstationforthebatteriesofthetransmittercomponent

• Rangeofpressureupto15m

• RS232connectiontoPC

• 250mlor500mlbowlsmadeofstainlesssteel

16

G R I N D I N G B O W L S A N D G R I N D I N G B A L L S

To avoid the risk of contaminating the samples with abrasion from the grinding elements, we offer grinding bowls and grinding

balls in 8 different materials for the FRITSCH classic line. In normal cases, grinding bowls and balls of the same material

are used. To shorten the grinding time, balls with a higher density and correspondingly higher impact energy can be used,

e.g. tungsten carbide balls in a steel bowl or zirconium oxide balls in a silicon nitride bowl.


G A S S I N G L I D

Through the use of a special lid on the grinding bowl, you can

also grind your samples in inert atmospheres. Two valves

allow for easy and safe filling of the bowls with inert gas while

they are firmly clamped in the mill. A special Additional Lock-

System is required for gas-tight removal and transportation

(see below).

A D D I T I O N A L L O C K - S Y S T E M

With this special Additional Lock-System, you can gas-tight

seal your grinding bowls for transport between filling in the

glove box and the mill. With an additional adapter, it can

also be used for small grinding bowls.

17

Material Data for Grinding Bowls/Grinding Balls

Material Main component of the material* Density g/cm3 Abrasion resistance Use for material to be ground

Agate SiO2

2.65 Good Soft to medium-hard samples

Sintered corundum Al2O

33.8 Fairly good Medium-hard, fibrous samples

Silicon nitride Si3N

43.25 excellent Abrasive samples, iron-free grinding

Zirconium oxide ZrO2

5.9 very good Fibrous, abrasive samples

Stainless steel Fe – Cr – Ni 7.8 Fairly good Medium-hard, brittle samples

Tempered steel Fe – Cr 7.9 Good Hard, brittle samples

Hardmetal tungsten carbide WC 14.95 very good Hard, abrasive samples

Polypropylene disposable bowl(only for PuLveRISeTTe 7 classic line)

0.9 For homogenisation

* At www.fritsch.de, you can find the corresponding element analyses with detailed information about the materials.

I. Grinding balls > 5 mm: Recommended number of balls per grinding bowl

Grinding Bowl /

Useful capacity (sample volume)

12 ml

0.5 – 5 ml

45 ml

3 – 20 ml

80 ml

10 – 30 ml

250 ml

30 – 125 ml

500 ml

80 – 225 ml

Balls diameter

40 mm 4

30 mm 6 8

20 mm 5 15 25

15 mm 7 10 45 70

10 mm 6 18 25 50 100

5 mm 50 180 250 1200 2000

II. Grinding balls > 3 mm: Recommended ball mass per grinding bowl in grams

Grinding Bowl /

Useful capacity (sample volume)

12 ml

0.5 – 5 ml

45 ml

3 – 20 ml

80 ml

10 – 30 ml

250 ml

30 – 125 ml

500 ml

80 – 225 ml

Material

Zirconium oxide 20 70 100 400 800

Tempered steel 30 90 150 500 1100

Hardmetal tungsten carbide 50 200 300 1000 2100

Grinding balls with a diameter of 3 mm or less must be weighed out. The above table provides you with the required mass per grinding bowl.

T E C H N I C A L D ATA

Recommended Bowl Filling

The quantity of grinding balls may be reduced by up to 15%; but, increased abrasion will occur. The specified number/mass of balls per bowl is the minimum quantity; depending on the material properties, it may need to be increased.In normal cases, grinding bowls and balls of the same material are used. To shorten the grinding time, larger or heaver balls with higher density can be used, e.g.: Tungsten carbide balls in a steel bowl or zirconium oxide balls in a silicon nitride bowl.

18


O R D E R I N G D ATAOrder No. Article

PLANETARY MILLS classic line PLANETARY MILL PULVERISETTE 5 Instrument without grinding bowls and balls, incl. Safe-Lock

clamping system • with 4 grinding bowl fasteners 05.5000.00 For 100-120/200-240 v/1~, 50-60 Hz, 1300/1600 watt* • with 2 grinding bowl fasteners05.6000.00 For 100-120/200-240 v/1~, 50-60 Hz, 1300/1600 watt*

PLANETARY MONO MILL PULVERISETTE 6 Instrument without grinding bowls and balls, incl. Safe-Lock

clamping system 06.2000.00 For 100-120/200-240 v/1~, 50-60 Hz, 1100 watt*

PLANETARY MICRO MILL PULVERISETTE 7 Instrument without grinding bowls and balls, incl. clamping system07.4000.00 For 100-120/200-240 v/1~, 50-60 Hz, 880 watt*

VARIO-PLANETARY MILL PULVERISETTE 4 Instrument without grinding bowls and balls, incl. clamping system04.1030.00 For 400 v/3~, 50-60 Hz, 6000 watt The PULVERISETTE 4 can only be operated on a three-phase supply

network.

* The voltage specified in the order is set.

GTM - GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM

50.2510.00 Incl. 250 ml grinding bowl made of stainless steel with special lid, transmitter and separate receiver50.2540.00 Incl. 500 ml grinding bowl made of stainless steel with special lid, transmitter and separate receiver

If further grinding bowls and transmitters are required, please ask!

Order No. Article

GRINDING BOWL WITH LID AND SEAL RING classic line

Grinding bowl 500 ml volume for PULVERISETTE 4, PULVERISETTE 5 and PULVERISETTE 6

50.1050.00 Agate50.1060.00 Sintered corundum (99.7% Al

2O

3)

50.1310.00 Silicon nitride, with steel casing50.1110.00 Zirconium oxide50.1100.00 Stainless steel50.1090.00 Tempered steel

50.1010.20 Replacement seal ring PTFe 110/101 mm diameter for silicon nitride grinding bowls

50.1230.20 Replacement seal ring PTFe 116/100 mm diameter for all other grin-ding bowls

Grinding bowl 250 ml volume for PULVERISETTE 4, PULVERISETTE 5 and PULVERISETTE 650.2055.00 Agate, with steel casing50.2060.00 Sintered corundum (99.7% Al

2O

3)

50.2310.00 Silicon nitride, with steel casing50.2110.00 Zirconium oxide50.2100.00 Stainless steel50.2090.00 Tempered steel50.2080.00 Hardmetal tungsten carbide, with steel casing

50.2010.20 Replacement seal ring PTFe 85/76 mm diameter for agate and silicon nitride grinding bowls

50.2230.20 Replacement seal ring PTFe 90/75 mm diameter for all other grinding bowls

Grinding bowl 80 ml volume for PULVERISETTE 4, PULVERISETTE 5 and PULVERISETTE 650.4050.00 Agate50.4060.00 Sintered corundum (99.7% Al

2O

3)

50.4310.00 Silicon nitride50.4110.00 Zirconium oxide50.4100.00 Stainless steel50.4090.00 Tempered steel50.4080.00 Hardmetal tungsten carbide, with steel casing

50.4230.20 Replacement seal ring PTFe 80/65 mm diameter for all grinding bowls90.1120.09 Adapter (essential, when only one grinding bowl is located in the grinding bowl holder)

Grinding bowl 45 ml volume for PULVERISETTE 4 and PULVERISETTE 750.7050.00 Agate50.7060.00 Sintered corundum (99.7% Al

2O

3)

50.7310.00 Silicon nitride50.7110.00 Zirconium oxide50.7100.00 Stainless steel50.7090.00 Tempered steel50.7080.00 Hardmetal tungsten carbide50.7200.00 Polypropylene disposable bowl (only for PuLveRISeTTe 7 classic line)07.3280.13 Bowl adapter for disposable bowl (only for PuLveRISeTTe 7 classic line)

50.7250.20 Replacement seal ring PTFe 50/40 mm diameter for all grinding bowls Grinding bowl 12 ml volume for PULVERISETTE 4 and PULVERISETTE 750.5050.00 Agate50.5060.00 Sintered corundum (99.7% Al

2O

3)

50.5310.00 Silicon nitride50.5110.00 Zirconium oxide50.5100.00 Stainless steel50.5090.00 Tempered steel50.5080.00 Hardmetal tungsten carbide

50.5250.20 Replacement seal ring PTFe 37/26 mm diameter for all grinding bowls

ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANI-CAL ALLOYING

Gassing lid with 2 valves and seal ring for grinding bowls 500 ml50.8000.00 Agate 50.9150.00 Silicon nitride50.9100.00 Zirconium oxide 50.8200.00 Stainless steel50.8400.00 Tempered steel

50.1230.16 Replacement seal ring viton for gassing lid

Gassing lid with 2 valves and seal ring for grinding bowls 250 ml 50.8100.00 Agate 50.8900.00 Silicon nitride50.8950.00 Zirconium oxide 50.8300.00 Stainless steel50.8500.00 Tempered steel50.8600.00 Hardmetal tungsten carbide

50.2010.16 Replacement seal ring viton for gassing lid for agate and silicon nitride grinding bowls

50.2230.16 Replacement seal ring viton for gassing lid for all other grinding bowls

Gassing lid with 2 valves and seal ring for grinding bowls 80 ml 50.8810.00 Agate50.8840.00 Zirconium oxide 50.8800.00 Stainless steel50.8700.00 Tempered steel50.8880.00 Hardmetal tungsten carbide

50.4230.16 Replacement seal ring viton for gassing lid

90.1400.00 Additional lock-system for all grinding bowls 500 ml, 250 ml, 80 ml volume (for the transport of the closed grinding bowl with gassing lid)

compatibleGTMGTM

19

Test our instruments in practice!If you would like to be convinced of

the performance and ease of use

of FRITSCH Planetary Mills, we

would be happy to call on you with

the FRITSCH mobile laboratory and

provide you with on-site practical

demonstrations.

Alternatively, send us your samples for

a free grinding trial after which we will

submit a fully documented grinding

report identifying the most suitable

instrument and accessories to meet

your requirements.

A comprehensive collection of

grinding reports for various materials

and industries can also be found

online at www.fritsch.de under the

menu item Sample Preparation /

Solutions.

It‘s worth to take a look!

Scheduling and information

+49 67 84 70 0

www.fritsch.de

Order No. Article

GRINDING BALLS (PER PIECE)

Grinding balls 40 mm diameter 55.0400.06 Sintered corundum (99.7% Al

2O

3)


Grinding balls 30 mm diameter55.0300.05 Agate, polished55.0300.06 Sintered corundum (99.7% Al

2O

3)


Grinding balls 20 mm diameter 55.0200.05 Agate, polished55.0200.06 Sintered corundum (99.7% Al

2O

3)


Grinding balls 15 mm diameter55.0150.05 Agate, polished55.0150.06 Sintered corundum (99.7% Al

2O

3)


Grinding balls 10 mm diameter 55.0100.05 Agate, polished55.0100.06 Sintered corundum (99.7% Al

2O

3)


Grinding balls 5 mm diameter55.0050.05 Agate, polished55.0050.27 Zirconium oxide55.0050.10 Stainless steel 55.0050.09 Tempered steel55.0050.08 Hardmetal tungsten carbide

GRINDING BALLS > 3 MM IN DIAMETER (100-G PACKAGE)

55.0030.27 Zirconium oxide 3 mm55.0020.27 Zirconium oxide 2 mm55.0015.27 Zirconium oxide 1.5 mm55.0010.27 Zirconium oxide 1 mm55.0005.27 Zirconium oxide 0.5 mm55.0001.27 Zirconium oxide 0.1 mm

55.0030.10 Stainless steel 3 mm55.0010.10 Stainless steel 1 mm 55.0030.09 Tempered steel 3 mm55.0010.09 Tempered steel 1 mm 55.0030.08 Hardmetal tungsten carbide 3 mm55.0016.08 Hardmetal tungsten carbide 1.6 mm55.0006.08 Hardmetal tungsten carbide 0.6 mm

Technicalspecificationsaresubjecttochangewithoutnotice.

Jaw Crushers and Disk Mills · classic line

JAW crUshErs DisK Mills

classic line

I D E A L F O RPRE-, FINE- AND ULTRA-FINE-GRINDING OF HARD AND BRITTLE MATERIALS IN THE AREAS- GLASS AND CERAMICS INDUSTRY- MINING AND METALLURGY- GEOLOGY AND MINERALOGY- CHEMICAL INDUSTRY- SOIL RESEARCH

2

fritsch Backenbrecher · Scheibenmühlen · Scheibenschwingmühlen fritsch Jaw Crushers and Disk Mills

FRITSCH is an internationally respected manufacturer of application-

oriented laboratory instruments. For more than 80 years, labora-

tories worldwide have relied on our experience, quality, service

and innovation - for fast industrial applications as well as for

especially accurate results in control- and research laboratories.

See for yourself.

f r i t s c h . O N E s t E P A h E A D .

3

f A s t c O M M i N U t i O N O f h A r D A N D

B r i t t l E M At E r i A l s

the compact pre-crusher

fritsch Jaw crusher P U lV E r i s E t t E 1 ...................................................... 4 – 7

Ideal as the classic workhorse for pre-crushing of brittle materials in the areas of mining and metal lurgy,

chemistry, geology and mineralogy, glass industry, ceramics industry, rocks and soils.

high fi nal fi neness for large quantities

fritsch Disk Mill P U lV E r i s E t t E 1 3 ......................................................... 8 – 11

Particularly ideal for medium particle sizes in the areas of mining and metallurgy, glass industry,

ceramics industry, soil research, rocks and soils.

Powerful combination – pre- and fi ne-crushing in a single step

fritsch Jaw crusher P U lV E r i s E t t E 1 and Disk Mill P U lV E r i s E t t E 1 3 ................................................................... 12 – 13

Ideal for fast, continuous pre- and fi ne-grinding of large quantities, including coarse materials, down

to analytical fi neness in the areas of mining and metallurgy, chemistry, geology and mineralogy, glass

industry, ceramics industry, soil research, rocks and soils.

Extremely short grinding time thanks to fritsch technology

fritsch Vibrating cup Mill P U lV E r i s E t t E 9 ............................................. 14 – 17

Ideal for fast sample preparation, such as in the areas of spectroscopy preparation, ore and geology

laboratories, mining and metallurgy, ceramics industry, agriculture and environmental science, infrared

and x-ray fl uorescence analysis.

Preparation of solid and high-quality pellets

fritsch Pellet Press ................................................................................................ 18

Manual hydraulic Pellet Press for the preparation of pellets with a smooth, homogeneous surface

for spectral analyses such as X-ray fl uorescence analysis or infrared spectroscopy for elementary

analysis.

instrument feed size final fi neness down to

Jaw Crusher PULVERISETTE 1, model I 60 mm 1 mm

Jaw Crusher PULVERISETTE 1, model II 95 mm 1 mm

Disk Mill PULVERISETTE 13 20 mm 0.1 mm

Jaw Crusher PULVERISETTE 1, model Iin combination with the Disk Mill PULVERISETTE 13

60 mm 0.1 mm

Jaw Crusher PULVERISETTE 1, model IIin combination with the Disk Mill PULVERISETTE 13

95 mm 0.1 mm

Vibrating Cup Mill PULVERISETTE 9 12 mm 0.01 mm

Pellet Press: for the preparation of pellets in a diameter of 32 or 40 mm with a pressure force of up to 250 kN

Ideal for fast sample preparation, such as in the areas of spectroscopy preparation, ore and geology

4

fritsch Jaw Crushers

t h E c O M P A c t P r E - c r U s h E r

• Very fast, uniform comminution

• Feed size up to 95 mm, fi nal fi neness 1–15 mm

• Extremely fast and easy cleaning

• Extremely robust even for very hard materials

• Especially simple crushing jaw removal

• Safe and dust-free operation

• Adaptable crushing jaw kinematics for higher fi nal fi neness

the compact fritsch Jaw crusher PUlVErisEttE 1 classic

line is the ideal instrument for fast and effective pre-crushing

of hard and very hard brittle materials – even ferrous alloys

are no problem for this instrument! choose according to

your tasks: two different models for various feed sizes and

sample quantities are available.

The powerful comminution of the sample takes place in

the Jaw Crusher under high pressure between one fi xed

and one movable crushing jaw in an enclosed grinding

chamber. The fi nal fi neness is easily set from the outside

with the 10-stage adjustable gap width between the cru-

shing jaws. The ground sample automatically falls down-

ward – into a drawer for batchwise comminution or via

a chute into a larger collection container for continuous

operation or directly into a FRITSCH Disk Mill PULVERI-

SETTE 13 classic line for further comminution.

Saves time and energy: the especially

simple crushing jaw removal takes only

seconds and requires only two hand

motions to ensure particularly simple

cleaning – fast and thorough.

The especially simple cleaning of the

FRITSCH Jaw Crusher PULVERISETTE 1

classic line saves time and offers ef-

fective contamination protection for

your samples.

P U L V E R I S E T T E 1classic line

5

The funnel of the FRITSCH Jaw Crusher

PULVERISETTE 1 classic line is particularly

accessible, quickly and easily fi lled even with

larger sample quantities and easy to clean.

Its design enables the crushed material to

be automatically conveyed into the crushing

chamber – blockages are practically impos-

sible.

For simple and fast releasing of the fi xed

crushing jaw. The crushing jaw can be re-

moved for cleaning quickly and easily with

just 2 hand motions.

Gap width adjustment for setting the distance

between the crushing jaws – and therefore

setting the fi nal fi neness.

View of the grinding chamber with the

housing removed

The practical collecting vessel for batchwise

comminution is particularly easy to remove.

A practical plexiglas cover for optical inspec-

tion of optimum material fl ow.

Especially safe and dust-free: The enclosed grinding chamber prevents users

from reaching inside and ensures a safe and dust-free operation of all moving

parts. An integrated connection makes it very simple to combine the instru-

ment with a dust exhaust system for automatic removal of the fi ne dust arising

during grinding. The dust exhaust system is also very useful when cleaning

the grinding parts.

The kinematics – in other words, the move-

ment between the movable and fi xed crushing

jaws – of the FRITSCH Jaw Crusher PULVERI-

SETTE 1 classic line can be easily adapted to

the breaking characteristics of the respec-

tive sample: Select the upward and down-

ward movement of the movable crushing jaw

relative to the fi xed one in order to receive a

sample in a narrow particle size range. For a

fast comminution, please select the nearly

circular motion.

6

fritsch Jaw Crushers

O U r s U g g E s t i O N Double the service life of your crushing jaws – they can be easily

turned around on the FRITSCH Jaw Crusher PULVERISETTE 1 classic line.


select the right material combination!

The crushing jaws and lateral support walls of the FRITSCH

Jaw Crusher PULVERISETTE 1 classic line are available in

6 different materials in order to avoid undesired contami-

nation due to material abrasion. The standard version is

equipped with fi xed and movable crushing jaws as well as

lateral support walls made of tempered steel.

Normally, crushing jaws and support walls of the same mate-

rial are used. Since the lateral support walls are subject to

low stresses, however, the standard lateral support walls

made of tempered steel can often be retained.

MAtEriAl DAtA fOr crUshiNg JAWs AND sUPPOrt WAlls

Material Main component Abrasion Use for material to of the material* resistance be groundTempered steel Fe – Cr Good Brittle, very hard samplesStainless steel Fe – Cr – Ni Fairly good Medium-hard, brittle samplesChromium-free steel Fe Good Medium-hard samplesManganese steel Mn – Fe Good Hard, brittle samplesHardmetal tungsten WC Very good Hard, abrasivecarbide samplesZirconium oxide¹) ZrO

2 Good Medium-hard, brittle

samples, iron-free grindingAluminium Al Fairly good Medium-hard, brittle samples, iron-free grinding

* At www.fritsch.de, you can fi nd the corresponding element analyses with detailed information about the materials.

1) Crushing jaws of zirconium oxide are only suitable for crushing ceramic materials, minerals, etc. and never for hard-tough samples, such as metals.

rohs (restriction of the use of certain hazardous substances)

For the comminution of RoHS samples – such as for the XRF

analysis – crushing jaws and support walls made of chromium-

free steel are particularly well suited.

iron-free pre-crushing

For completely iron-free pre-crushing of medium-hard brittle

samples, for example in the ceramics industry, we can

equip your FRITSCH Jaw Crusher PULVERISETTE 1 classic

line with crushing jaws made of zirconium oxide, lateral

support walls in zirconium oxide or aluminium, and with a

special PVC funnel. So you will have absolute protection

against iron contamination, such as for dental ceramics.

steel crushing jaws with a grooved surface

If required, we can equip your PULVERISETTE 1 classic line,

model II, with fi xed and movable crushing jaws in steel with

a grooved surface, which have a different infl uence on par-

ticle shape and particle size distribution.

7

Powerful: Coarse basalt rock crushed by the PULVERISETTE 1 classic line (model I) at gap position 2 to the fi nal fi neness shown in the collecting vessel on the right.

Mining and metallurgy Niobium-titanium, ferrovanadium, chrome vanadium,

tungsten carbide, ores, coal, slag, coke

chemistry Wide variety of various raw materials

geology and mineralogy Granite, basalt, barite, silicates and other rocks

glass industry Frits, glass, raw materials

ceramics industry Dental ceramics, steatite, fi re-clay, sintered ceramics,

electrotechnical porcelain

rocks and soils Bauxite, clinker, quartz, concrete

APPlicAtiON EXAMPlEs

tEchNicAl DAtA

Electrical details Model I, 400 V/3~, 50-60 Hz, 1450 wattModel I, 230 V/1~, 50-60 Hz, 1570 wattModel I, 115 V/1~, 50-60 Hz, 1900 wattModel II, 400 V/3~, 50-60 Hz, 2780 wattMotor shaft power in accordance with VDE 0530, EN 60034 Model I, 1.1 kWModel II, 2.2 kWWeightModel I, net 177 kg, gross 202 kgModel II, net 205 kg, gross 230 kgDimensions w x d x h Model I and model II, bench top instrument 40 x 80 x 80 cmPackaging w x d x h Model I and model II, wooden case 90 x 75 x 90 cm Emissions value of workplace according to DiN EN isO 3746:2005Approx. 85 dB(A)(depending on the material to be crushed)

Order no. 400 V/3~ 230 V/1~ 115 V/1~Model I 01.5030.00 01.5020.00 01.5010.00Model II 01.7030.00

fActs AND ADVANtAgEs Model I resp. model II

Working principle Pressure

Bearings Needle and spherical roller bearings

standard equipmentInstrument with fi xed and movable crushing jaw and lateral support walls of tempered steel

Optimal for material type Hard, medium-hard, brittle

Max. feed size (depending on the material) 60 mm resp. 95 mm

Min. sample quantity 20 ml

Max. continuous throughput(depending on material and gap width)

140 kg/h resp. 200 kg/h

final fi neness 1 – 15 mm

feeding Batchwise/continuous

grinding parts Fixed and movable crushing jaws

Eccentric oscillations 308 movements/min

conformity CE mark

guarantee 2 years

i r O N - f r E E g r i N D i N gFor iron-free grinding, use the practical

PVC funnel.

8

fritsch Disk Mill

h i g h f i N A l f i N E N E s s f O r l A r g E Q U A N t i t i E s

• High throughput up to 150 kg/h

• Fine grinding down to 0.1 mm

• Fast, easy cleaning

• Simple operation

• Fast grinding disk change

• Precision setting of the fi nal fi neness even during grinding

• High service life due to generously dimensioned bearings

the especially heavy and solid fritsch Disk Mill PUl-

VErisEttE 13 classic line is the ideal instrument for

fi ne grinding of up to 150 kg per hour of hard-brittle

and medium-hard solids – even in continuous opera-

tion. the maximum feed size per piece is approximately

20 mm edge length, the fi nal fi neness is freely adjustable

between 12 mm and 0.1 mm.

The material to be ground is comminuted by pressure and

shearing action between two counteracting grinding disks with

coarse interlocking teeth. The ground material automatically

falls down through an output gap into the collection drawer.

The desired fi nal fi neness can be defi ned from the outside

by changing the gap width.

Especially time saving: The grinding

chamber can be completely opened

which makes cleaning especially simple

and the grinding disks are very easily

accessible for changing.

P U L V E R I S E T T E 1 3classic line

9

Especially accurate: The precision sliding

table of the FRITSCH Disk Mill PULVERI-

SETTE 13 classic line for precise gap

setting with an accuracy of 0.1 mm – for

rapid, precise operation and exactly repro-

ducible grinding results.

Especially accurate:

table of the FRITSCH Disk Mill PULVERI-

SETTE 13

setting with an accuracy of 0.1 mm – for

rapid, precise operation and exactly repro-

ducible grinding results.

Especially safe: The centrally located ten-

sion lock of the grinding chamber

Especially convenient: Easy gap width

check from the outside (e.g. with thickness

gauge)

• Especially solid: The thick-walled housing of the FRITSCH PULVERISETTE 13 classic

line consists of recyclable grey cast iron.

• Especially clean: The connecting piece (optional) for a dust exhaust system really

simplifi es the automatic removal of fi ne dust occuring during grinding and is even an

optimal aid for cleaning the grinding parts.

10

fritsch Disk Mill

select the appropriate grinding disks

For every FRITSCH Disk Mill PULVERISETTE 13 classic line,

you need at least one fi xed and one movable grinding disk,

which are available in various materials.

Normally, two grinding disks of the same material are

selected, which must always be harder than the sample

to be ground.

MAtEriAl DAtA fOr fiXED AND MOVABlE griNDiNg DisKs Material Main component Abrasion Use for material to of the material* resistance be groundHardened cast steel Cr – Fe Good Hard, brittle samplesManganese steel Mn – Fe Good Very hard, brittle samplesHardmetal tungsten WC Very good Very hard, abrasive carbide samplesZirconium oxide1) ZrO

2 Good Medium-hard, brittle

samples, iron-free grinding

* At www.fritsch.de, you can fi nd the corresponding element analyses with detailed information about the materials.

1) Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, minerals, etc. and never for hard-tough samples, such as metals.

high fi nal fi neness in minimum time

With the FRITSCH PULVERISETTE 13 classic line, you can

achieve high fi nal fi nenesses in a very short grinding time.

We have listed some examples here – always in refer-

ence to 1 kg feed quantity and 20 mm particle size and

arranged by material types from hard to medium-hard.

Material to grinding time gap setting fineness throughputbe ground (min) (mm) (µm) kg/h 90 % < x 50 % < xBasalt 2.1 1.0 600 28 3.5 0.1 220 60 17Clinker 2.0 0.5 900 450 30 10.0 0.1 220 60 6Slate 1.4 1.0 1500 45 2.2 0.1 300 90 27Hard coal 3.5 1.0 800 17 13.5 0.1 250 100 4Limestone 2.0 1.0 1000 420 30 6.3 0.1 210 100 10Thomas meal (potash) 1.3 1.0 1000 350 45 2.3 0.5 350 150 36Pumice stone 3.5 0.5 600 250 17 5.0 0.1 150 30 12Glass 2.5 3.0 4000 2240 25 3.3 2.0 2500 1600 18 3.8 1.0 1400 800 16

The indicated results are to be considered as an orientation guide, since the chemi cal and physical properties (e.g. residual moisture, morphology, etc.) can vary even with the same material to be ground.

O U r s U g g E s t i O N Lengthen the service life of the grinding disks in your

FRITSCH Disk Mill by simply changing the rotational direction

of the maintenance-free three-phase geared motor.

P U L V E R I S E T T E 1 3classic line

11

tEchNicAl DAtA

Electrical details400 V/3~, 50-60 Hz, 1830 wattMotor shaft power in accordance with VDE 0530, EN 600341.5 kWWeightNet 140 kgGross 170 kgDimensions w x d x hBench top instrument 44 x 87 x 40 cmPackaging w x d x hWooden case 100 x 52 x 70 cmEmissions value of workplace according to DiN EN isO 3746:2005Approx. 89 dB(A)(depending on the material to be ground)

Order no. 13.1030.00

fActs AND ADVANtAgEs

Working principle Shearing

Bearings Needle and double row angular contact ball bearings

Equipment Instrument without grinding disks

Optimal for material type Hard-brittle, medium-hard

Max. feed size (depending on the material) 20 mm

Min. sample quantity 20 – 30 ml

Max. throughput(depending on the material)

150 kg/h

final fi neness 0.1 - 12 mm

feeding Batchwise/continuous

grinding parts Fixed and movable grinding disks

rotating speed of the grinding disk 440 rpm

conformity CE mark

guarantee 2 years

Grinding result with a gap width of 1 mmFilling of the funnel with pre-crushed glass bottles

Mining and metallurgy Ores, coal, coke, slags

ceramics industry Steatite, sintered ceramics, electrotechnical porcelain,

fi re-proof clay, dental ceramics

rocks and soils Bauxite, slags, quartz, clinker, gypsum, chalk

glass industry Frits, different glass types, raw materials

soil research Dried soil samples, sewage sludge, hydrological sedi-

ments, drilling cores


i r O N - f r E E g r i N D i N g For completely iron-free grinding of hard-brittle and medium-hard solid samples,

for example for dental ceramics, we can equip your FRITSCH Disk Mill

PULVERISETTE 13 classic line with a thorough polymer interior coating –

together with grinding disks made of zirconium oxide – an absolutely

reliable protection against iron contamination.

12

fritsch Jaw Crusher and Disk Mill

for fast, continuous pre- and fi ne-grinding particularly of

large quantities of coarse material, the combination of the

fritsch Jaw crusher PUlVErisEttE 1 classic line and the

fritsch Disk Mill PUlVErisEttE 13 classic line is the ideal

solution. Mounted together onto a rack and connected to

each other by a chute, they automatically grind the material

from a particle size of up to 95 mm to a fi nal fi neness of

down to 100 µm – fast, easy and effective in a single step!

Select the appropriate grinding parts and the de-

sired confi guration from the options available for the

PULVERISETTE 1 and 13 classic line on pages 6–7

and 10–11.

P O W E r f U l c O M B i N At i O N – P r E - A N D

f i N E - c r U s h i N g i N A s i N g l E s t E P

• Fast, continuous pre- and fi ne-grinding

• Compact in a single instrument

• Maximum particle size 95 mm

• Minimum fi nal fi neness 0.1 mm

1 Size of the material fi lling into the PUlVErisEttE 1

Particle size up to 95 mm

2 Intermediate results of the PUlVErisEttE 1

Final fi neness down to 1 mm

3 Final result of thePUlVErisEttE 13

Final fi neness down to 100 µm

Pre- and fi ne-grinding, with

quartzite stones as example

P U L V E R I S E T T E 1 / 1 3classic line

13

i r O N - f r E E P r E - A N D f i N E - g r i N D i N g The FRITSCH-Combination is also available for completely iron-free

pre- and fi ne-grinding. Details can be found on page 6.

2

3

1

A connection chute automatically conveys the pre-crushed material onward for fi ne grinding.

Mining and metallurgy Ores, coal, coke, slags, niobium-titanium, ferrovanadium,

chrome vanadium, tungsten carbide

geology and mineralogy Granite, basalt, barite, silicates and other rocks

glass industry Frits, glass, raw materials

ceramics industry Steatite, fi re-clay, sintered ceramics, electrotechnical porcelain, dental ceramics

rocks and soils Bauxite, clinker, quartz, concrete, slags, gypsum, chalk


14

fritsch Vibrating Cup Mill

the new, completely modifi ed fritsch Vibrating cup Mill

PUlVErisEttE 9 offers many practical advantages in all

areas in which hard, brittle and fi brous material must be

ground extremely quick down to analytical fi neness. Now

with increased grinding power and a completely new drive

concept, even safer and easier to tension the grinding set,

especially quiet, simple to operate and quick to clean.

Easy working

No similar mill offers a more convenient operation: The

working position is ergonomically optimised; the ease

of cleaning is without match. The grinding sets are

especially light, and do not have to be placed directly on

the vibrating plate in the centre of the mill. The grinding

set is simply placed on the guide rail and easily moved

to the fi nal position. This protects your back and saves

energy and time. The grinding set is tensioned in seconds

using a well-thought out one-hand lever.

simply clever!

• More power with new drive concept

• Extra-fast grinding with up to 1500 rpm

• Precise adjustment of rotational speed, grinding time and pause periods

• Programming and storage of grinding cycles

• Self-explanatory multilingual menu navigation

• Optimised tensioning of grinding set with anti-rotation lock

• Especially safe hood locking

• Complete soundproof lining

s t r O N g E r , f A s t E r , B E t t E r

Especially light: The grinding sets of the

new PULVERISETTE 9 are now consider-

ably lighter and are equipped with heat-

insulated handles.


15

Especially well-arranged: The

self-explanatory, multilingual

menu navigation on the LCD

display for setting the grinding

time precisely to the second,

the pause periods and the

rotational speed as well as the

programming and storage of

grinding cycles.

Especially intelligent: A special

detector automatically detects

when you use an agate grinding

set for grinding and reduces the

rotational speed independently.

Especially safe: Tensioned in seconds

with one hand and one grip, the com-

pletely new rapid and anti-twist tension-

ing for the grinding set.

Especially ergonomic: The PULVERI-

SETTE 9 grinding sets, which have been

considerably reduced in weight, are placed

at an optimised working height on a

practical guide rail and then easily moved

to the fi nal position.

Especially ergonomic:

SETTE 9 grinding sets, which have been

considerably reduced in weight, are placed

at an optimised working height on a

practical guide rail and then easily moved

to the fi nal position.

16

fritsch Vibrating Cup Mill

select the appropriate grinding set

Grinding sets in 5 different materials and 3 different sizes

from 50 ml to 250 ml volume are available for the FRITSCH

PULVERISETTE 9 – for each application the suitable one!

MAtEriAl DAtA fOr thE griNDiNg sEts

Material Main component Density Abrasion Use for material to of the material* g/cm3 resistance be groundTempered steel Fe – Cr 7.9 Good Brittle, hard samplesChromium-free steel Fe – Cr 7.8 Fairly good Brittle, hard samplesHardmetal tungsten WC 14.3 Very good Very hard, carbide abrasive samplesAgate SiO

2 2.65 Good Soft to medium-

hard, brittle, fibrous samplesZirconium oxide¹) ZrO

2 5.9 Good Medium-hard,

brittle, fibrous samples, iron-free grinding

* At www.fritsch.de, you can find the corresponding element analyses with detailed information about the materials.

1) Grinding sets of zirconium oxide are only suitable for grinding ceramic materials, minerals, etc. and never for hard-tough samples, such as metal.

griNDiNg MEDiA AND VOlUMEs

Volume Useful capacity (sample volume) grinding parts50 ml 15 – 50 ml 1 puck100 ml 30 – 100 ml 1 puck + 1 ring250 ml 75 – 250 ml 1 puck + 1 ring

Optimises your grinding process: the fritsch-motor with

torque-optimised frequency converter

In the Vibrating Cup Mill, the grinding is per formed by

horizontal circular oscillations of the grinding set on a vibrating

plate. The grinding set consisting of ring and puck comminute

the grinding sample with extremely high pressure, impact

forces and friction. In this form of grinding, the transmission

of forces onto the grinding sample is much more important

than the pure motor power. For this reason, FRITSCH as the

first provider worldwide, developed for the PULVERISETTE 9

a special motor and now equipped it with an especially

interference-resistant, torque-optimised frequency converter

which fulfils all the relevant safety standards worldwide. It

ensures that the motor output is precisely matched to the

grinding material and grinding set - which optimises the energy

consumption.

O U r s U g g E s t i O N Grinding sets with high density, e.g. tempered steel

or tungsten carbide, reduce the grinding time.


17

How to go mobile with the Vibrating Cup Mill: On request, we can supply the PULVERISETTE 9 on heavy duty wheels with arresting brake.

fActs AND ADVANtAgEs

Working principle Impact

Bearings Ball- and cylindrical roller bearings

Equipment Instrument without grinding set

Optimal for material type Hard, medium-hard, brittle, fi brous



Max. sample quantity 250 ml

final fi neness 10 – 20 µm

feeding Batchwise

grinding parts Grinding set with grinding puck and impact ring

Motor speed 600 – 1500 rpm

Useful capacity 50, 100 or 250 ml

conformity CE mark

guarantee 2 years

Pressure elements automatically lift the grinding set, the anti-rotation lock tensions them absolutely safe and the safety switch checks the fi rm position.


Mining For processing coal, ores or minerals for physical or chemical

analysis

Metallurgy For grinding blast furnace slag or cast iron samples to

determine additives

ceramics industry For grinding rock samples to produce raw powder to determine

CaCO3- and MgO-content or clinkers to study the constancy of

the mineralogical structure

Agriculture and environment

For preparing samples for chemical analysis of soils, sludges or vegetable samples

infrared and X-ray fl uorescence analysis

For preparing samples in a short grinding time without contamination due to undesired abrasion.

How to go mobile with the Vibrating Cup Mill: On

Pressure elements automatically lift the grinding set, the anti-rotation lock tensions them absolutely safe and the safety switch checks the fi rm position.


Mining

Metallurgy

ceramics industry

Agriculture and

tEchNicAl DAtA

Electrical Details 230-240 V/1~, 50-60 Hz, 1200 watt100-120 V/1~, 50-60 Hz, 1200 wattMotor shaft power in accordance with VDE 0530, EN 60034 1.1 kWWeightNet 267 kgGross 330 kg Dimensions w x d x h Floor instrument 77 x 76 x 116 cmPackaging w x d x h Pallet box 82 x 88 x 147 cm Emissions value of workplace according to DiN EN isO 3746:2005Approx. 74 dB(A)(depending on the material to be ground and grinding set)Order no. 230-240 V/1~ 100-120 V/1~ 09.5000.00 09.5001.00

18

fritsch Jaw Crushers and Disk Mills

O r D E r i N g D AtAOrder no. Article

JAW crUshErs classic line PUlVErisEttE 1, model i

Instrument incl. fi xed and movable crushing jaw and lateral support walls made of tempered steel

01.5030.00 For 400 V/3~, 50-60 Hz, 1450 watt01.5020.00 For 230 V/1~, 50-60 Hz, 1570 watt01.5010.00 For 115 V/1~, 50-60 Hz, 1900 watt The PULVERISETTE 1 with voltage of „/3~“ can only be operated on a three-phase supply network. Other voltages on request.

Crushing jaws for model I43.0010.09* Fixed crushing jaw made of tempered steel43.0020.09* Movable crushing jaw made of tempered steel43.0030.10 Fixed crushing jaw made of stainless steel43.0040.10 Movable crushing jaw made of stainless steel43.0011.09 Fixed crushing jaw made of chromium-free steel43.0021.09 Movable crushing jaw made of chromium-free steel43.0130.23 Fixed crushing jaw made of manganese steel43.0140.23 Movable crushing jaw made of manganese steel43.0050.08 Fixed crushing jaw made of hardmetal tungsten carbide43.0060.08 Movable crushing jaw made of hardmetal tungsten carbide43.0100.27 Fixed crushing jaw made of zirconium oxide 1)

43.0110.27 Movable crushing jaw made of zirconium oxide 1)

Lateral support walls for model I43.0070.09* 1 pair made of tempered steel43.0080.10 1 pair made of stainless steel43.0071.09 1 pair made of chromium-free steel43.0090.08 1 pair made of hardmetal tungsten carbide43.0150.13 1 pair made of aluminium43.0160.27 1 pair made of zirconium oxide 1) Accessories for iron-free pre-crushing for model I 01.5410.00 Funnel PVC incl. clamping strips (Please note: fi xed and movable crushing jaws made of zirconium oxide

and lateral support walls made of zirconium oxide or aluminium are additionally necessary!)

PUlVErisEttE 1, model ii

Instrument incl. fi xed and movable crushing jaw and lateral support walls made of tempered steel

01.7030.00 For 400 V/3~, 50-60 Hz, 2780 watt The PULVERISETTE 1 with voltage of „/3~“ can only be operated on a

three-phase supply network. Other voltages on request.

Crushing jaws for model II43.3010.09* Fixed crushing jaw made of tempered steel43.3020.09* Movable crushing jaw made of tempered steel43.3030.10 Fixed crushing jaw made of stainless steel43.3040.10 Movable crushing jaw made of stainless steel43.3011.09 Fixed crushing jaw made of chromium-free steel43.3021.09 Movable crushing jaw made of chromium-free steel43.3130.23 Fixed crushing jaw made of manganese steel43.3140.23 Movable crushing jaw made of manganese steel43.3050.08 Fixed crushing jaw made of hardmetal tungsten carbide43.3060.08 Movable crushing jaw made of hardmetal tungsten carbide43.3100.27 Fixed crushing jaw made of zirconium oxide 1)

43.3110.27 Movable crushing jaw made of zirconium oxide 1)

Fixed and movable crushing jaws made of steel with grooved surfaceon request.

Lateral support walls for model II43.3070.09* 1 pair made of tempered steel43.3080.10 1 pair made of stainless steel43.3071.09 1 pair made of chromium-free steel43.3090.08 1 pair made of hardmetal tungsten carbide43.3150.13 1 pair made of aluminium43.3160.27 1 pair made of zirconium oxide 1)

Accessories for iron-free pre-crushing for model II01.7410.00 Funnel PVC incl. clamping strips (Please note: fi xed and movable crushing jaws made of zirconium oxide and lateral support walls made of zirconium oxide or aluminium are additionally necessary!)

* Included in the basic price of the instrument; when ordering a deviating specifi cation from the standard accessories, please specify the exact article number of the replacement part.

the manually-operated hydraulic fritsch Pellet

Press is ideal for fast and easy preparation of both:

solid and highly permeable pellets of solid samples

for X-ray fl uorescence analysis or infrared spectros-

copy.

The pressure force is variable up to max. 250 kN and

is automatically relieved in case of overstress. The

pressing tool for pellets with 40 mm diameter is in-

cluded in delivery, a 32 mm diameter pressing tool

is optional.

It's as easy as this: Fill in the sample, close the mag-

netically-held door and build-up the desired pressure

using the hand lever - that's it.

If your pellets require binding agents for stabilisation,

please contact us and we will be happy to assist.

simple: By pressing the hand lever down, you create a solid, highly permeable pellet for further analysis.

P E l l E t P r E s s

ideal for high-quality pellets

• Pressing tools: 40 mm diameter included, 32 mm diameter optional

• Variable pressure force up to 250 kN• Clearly designed pressure force display in 10 kN steps• Simple operation via hand lever• Easy cleaning• Single-stage piston stroke of max. 25 mm• Automatic pressure relief in case of overstress• Solid and compact with impact-resistant cladding

stable and impact-resistant: The transparent polycarbonate cladding with all-round observation window.

simple: By pressing the hand lever down, you create a solid, highly permeable pellet for further analysis.

stable and impact-resistant: The transparent polycarbonate cladding with all-round observation window.

19Technical specifi cations are subject to change without notice.

Order no. Article

AccEssOriEs fOr JAW crUshEr PUlVErisEttE 1, MODEl i + ii Dust exhaust system43.9050.00 Dust exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50-60 Hz, 1000 watt43.9055.00 Paper fi lter bag for exhaust system (pack = 5 pieces) 2)

43.9052.00 Plastic bag for exhaust system (pack = 5 pieces) 2)

43.9051.00 Filter set polyester for exhaust system 2)

For continuous operation43.5100.00 Mounting rack for combined use of the Jaw Crusher PULVERISETTE 1

with the Disk Mill PULVERISETTE 13 Select the desired confi guration from the options offered for the PULVERISETTE 13 on pages 10-11.

DisK Mill classic line

PUlVErisEttE 13

Instrument without grinding disks13.1030.00 For 400 V/3~, 50-60 Hz, 1830 watt The PULVERISETTE 13 with voltage of „/3~“ can only be operated on a

three-phase supply network. Other voltages on request.

Grinding disks13.1100.09 Fixed grinding disk, 200 mm dia., hardened steel cast13.1110.09 Movable grinding disk, 200 mm dia., hardened steel cast13.1120.23 Fixed grinding disk, 200 mm dia., manganese steel13.1130.23 Movable grinding disk, 200 mm dia., manganese steel13.2000.08 Fixed grinding disk, 200 mm dia., hardmetal tungsten carbide13.2010.08 Movable grinding disk, 200 mm dia., hardmetal tungsten carbide13.2100.27 Fixed grinding disk, 200 mm dia., zirconium oxide 1)

13.2110.27 Movable grinding disk, 200 mm dia., zirconium oxide 1)

Accessories for iron-free grinding13.1090.16 Thorough polymer coating inside of grinding chamber

(Please note: fi xed and movable grinding disks made ofzirconium oxide are additionally necessary!)

Dust exhaust system43.9050.00 Dust exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50-60 Hz, 1000 watt13.1450.00 Connecting piece for dust exhaust system43.9055.00 Paper fi lter bag for exhaust system (pack = 5 pieces) 2)

43.9052.00 Plastic bag for exhaust system (pack = 5 pieces) 2)

43.9051.00 Filter set polyester for exhaust system 2)

For continuous operation43.5100.00 Mounting rack for combined use of the Jaw Crusher PULVERISETTE 1 with the Disk Mill PULVERISETTE 13 Select the desired confi guration from the options offered for the PULVERISETTE 1 on pages 6-7.

1) Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, minerals, etc. and never for hard-tough samples, such as metals.

2) One pack/one piece is included in the order of the exhaust system.

Order no. Article

cOMBiNAtiON Of JAW crUshEr AND DisK Mill PUlVErisEttE 1/13 classic line

JAW crUshEr PUlVErisEttE 1 AND DisK Mill PUlVErisEttE 13 iN thE DEsirED cONfigUrAtiON

To order a Combination for fast pre- and fi ne-grinding in a single step, order both instruments individually in the desired confi guration plus the associated mounting rack that combines the instrument into a single high-performance grinding instrument.

Select the desired confi guration from the options offered for the PULVERISETTE 1 and 13 on pages 6-7 and 10-11.

43.5100.00 Mounting rack for combined use of the Jaw Crusher PULVERISETTE 1 with the Disk Mill PULVERISETTE 13

ViBrAtiNg cUP Mill PUlVErisEttE 9

Instrument without grinding set09.5000.00 For 230-240 V/1~, 50-60 Hz, 1200 watt 09.5001.00 For 100-120 V/1~, 50-60 Hz, 1200 watt

Grinding sets48.5125.00 Tempered steel, useful volume 250 ml48.5110.00 Tempered steel, useful volume 100 ml 48.5105.00 Tempered steel, useful volume 50 ml 48.5525.00 Chromium-free steel, useful volume 250 ml 48.5510.00 Chromium-free steel, useful volume 100 ml 48.5505.00 Chromium-free steel, useful volume 50 ml 48.5225.00 Hardmetal tungsten carbide, useful volume 250 ml48.5210.00 Hardmetal tungsten carbide, useful volume 100 ml 48.5205.00 Hardmetal tungsten carbide, useful volume 50 ml 48.5310.00 Agate, useful volume 100 ml 48.5305.00 Agate, useful volume 50 ml 48.5410.00 Zirconium oxide 1), useful volume 100 ml 48.5405.00 Zirconium oxide 1), useful volume 50 ml

93.4365.00 Wheels for Vibrating Cup Mill (1 set = 4 heavy-duty wheels, 2 with arresting brake)

PEllEt PrEss

Instrument incl. pressing tools09.9500.00 Pellet Press, hydraulic, manual complete with pressing tool for pellets with 40 mm diameter,

pressure force 250 kN09.9600.00 pressing tool for pellets with 32 mm diameter

PUlVErisEttE 13

PR

OD

UC

TOV

ER

VIE

W

MILLING SIEVING DIVIDING

Sample Preparation

2

FRITSCH is an internationally respected manufacturer of

application-oriented laboratory instruments. Laboratories

worldwide rely on our quality, our experience, our consultation

and our service – for fast industrial applications as well

as for especially accurate results in control- and research

laboratories.

W H E N W I L L Y O U J O I N U S ?

F R I T S C H .O N E S T E PA H E A D .

F R I T S C H P A R T I C L E S I Z I N G

For over 25 years, FRITSCH is also the right choice in the area of high-tech

particle technology: for particle size determination in the convergent laser

beam or by means of dynamic light scattering (DLS) as well as for analysis

of particle shape and size with dynamic image analysis. For exact, reliable

and reproducible results down to the lower nanometer range. Of course, in

the typical FRITSCH quality for easy, fast and reliable particle size analysis.

Catch up on the state-of-the-art particle technology by FRITSCH!

www.fritsch-sizing.com

3

C O N T E N T S

S E R V I C E A N D C O N S U LTAT I O N ......................... 4 – 5

FRITSCH helps you quickly and easily to fi nd exactly the right laboratory

instrument for your application – including a free sample grinding. Benefi t

from our decades of experience.

M I L L I N G ........................................................................... 6 – 23

FRITSCH-high per formance mills are the laboratory standard around

the world – as Planetary Mills, Ball Mills, Cutting Mills, Rotor Mills,

Beater Mills, Jaw Crushers, Disk Mills and Mortar Grinders for specifi c

applications.

S I E V I N G ......................................................................... 24 – 25

FRITSCH Sieve Shakers offer ease of use and guarantee precise,

reproducible sieve analysis.

D I V I D I N G ....................................................................... 26 – 27

FRITSCH instruments are second to none for dividing, feeding and ease

of cleaning adding to the performance of your mills, sieve shakers and

particle sizers. They are your guarantee for accurate reproducible sample

preparation.

www.fritsch.de

4

FRITSCH Service and Consultation

4

F R E E S A M P L E G R I N D I N G A N D A N A LY S I S

Finding the right mill can be so easy: Simply send us a sample of your choice – we will perform a

free grinding or particle size analysis and send you a detailed grinding/size analysis report.

O N - S I T E T E S T I N T H E M O B I L E L A B O R AT O R Y

Test the FRITSCH instruments with your own samples – practically and simply in our fully

equipped laboratory bus. Simply schedule a date and we will drive by.

T R A I N I N G A N D W O R K S H O P S

We share our expertise – at regular workshops and seminars on your site or at convenient

locations worldwide. Ask us about them!

Yet another essential side of FRITSCH: Detailed consultation and comprehensive service –

practically anywhere in the world. To help you fi nd exactly the right laboratory instruments

for your specifi c applications without long drawn out costly investigations – it’s our aim to

provide reliable solutions to questions about laboratory technology in our fi eld of expertise.

T EST US – WE

5

T E C H N I C A L A P P L I C AT I O N C O N S U LTAT I O N

We will advise you on all technical application questions: via phone or personally. Or meet with

us at major national and international fairs and exhibitions.

LONG-TERM MAINTENANCE AND REPL ACEMENT PARTS SERVICE

We ensure optimal long-term use of your FRITSCH laboratory instruments with competitive

maintenance contracts and a delivery guarantee for all important spares for at least 10 years

– to maximise the security of your investment.

W O R L D - W I D E S E R V I C E

Wherever you are: FRITSCH is always nearby. With a global network of international

representative offi ces employing highly trained staff offering: application consultation, advice

on installation, maintenance and repair.

A R E P R E PA R E D !

6

FRITSCH Milling

THE RIGHT MILL FOR FIRST-RATE ANALYSIS E N S U R E T H E Q U A L I T Y O F Y O U R A N A LY S I S B Y C H O O S I N G

T H E R I G H T M I L L

The quality of every product or material analysis depends on

the quality of the sample preparation. It is therefore extremely

important to consider all the individual milling parameters in

order to make an informed choice: material properties, feed

size and volume of the sample, grinding time and desired fi nal

particle size, any abrasion of the grinding parts – all these

factors are signifi cant. And of course the costs.

For this reason, FRITSCH offers a wide selection of high-

per formance mills in various product groups for every

application and every specifi c need: Planetary Mills premium

line and classic line, Ball Mills, Cutting and Rotor Mills, Jaw

Crushers, Disk Mills and Mortar Grinders.

T H E R I G H T M I L L F O R E V E R Y M AT E R I A L

For a simple orientation, you can fi nd the recommended mills for the most common material categories in this brochure.

More detailed information offers the practical grinding report database at www.fritsch.de/solutions. There you will fi nd

comparison grindings with detailed information.

O R S I M P LY G I V E U S A C A L L – O U R E X P E R T S W I L L B E H A P P Y T O A S S I S T Y O U .

+49 67 84 70 - 150 (direct line) · [email protected]

7

M AT E R I A L T Y P E S – D E F I N I T I O N

Every FRITSCH mill is suitable for specifi c material types as shown in the product tables on the following pages. We

have also summarised the material types for the most common materials, as an additional service for you.

M AT E R I A L TA B L E

Material Material Type

Slag, alloys, granite, porphyry, iron ore Hard-abrasive

Clinker, quartz, rock, bauxite, ceramics, carborundum Hard-brittle

Glass, cement, calcite, coal, ash, sewage sludge, catalysts, soil, polluted land samples, tablets, fertilisers, pellets

Medium-hard

Grain, gypsum, salts, talc, animal feed, graphite, leaves, grass, pigments, spices, dragées, mica

Soft

Alloys, ceramics, salts, tablets, silicon carbide, silicon nitride, coke, coal, embrittled, e.g. with liquid nitrogen: plastics, duroplast, rubber, perspex

Brittle

Leather, hides, rubber Tough

Wool, resins, wood, cellulose, paper, plant roots Fibrous

Thermoplastics, pharmaceuticals Temperature-sensitive

Soil, grass, hay, leaves Moist

Abrasives Ball Mills, Planetary Mills, P-9

Alloys Ball Mills, Planetary Mills, P-1

Analysis Ball Mills, Planetary Mills, P-14

Animal fodder Cutting Mills, P-0, P-23

Biology Ball Mills, Planetary Mills, Cutting Mills

Bones P-19, P-25, P-0

Building materials Ball Mills, Planetary Mills, P-1, P-13, P-9

Catalysts Ball Mills, Planetary Mills, P-1

Cement clinker Ball Mills, Planetary Mills, P-1, P-13, P-9

Ceramics Ball Mills, Planetary Mills, P-1, P-13, P-9

Coal Ball Mills, Planetary Mills, P-16, P-1, P-13

Coating powder Ball Mills, Planetary Mills, P-14

Compound materials Cutting Mills, P-25/P-19 Combination, P-14

Drugs Ball Mills, Planetary Mills, Cutting Mills

Electronic scrap Cutting Mills, P-0, P-14

Environment Cutting Mills, P-0, P-23

Feed (pellets) Cutting Mills, P-2, P-14

Fertilisers Ball Mills, Planetary Mills, P-14, P-2

Fibres Ball Mills, Planetary Mills, P-1, P-13, P-9

Foils Cutting Mills

Food Ball Mills, Planetary Mills, Cutting Mills, P-2

Glass Ball Mills, Planetary Mills, P-1, P-13, P-9

Grains Cutting Mills, P-14

Household waste Cutting Mills, P-25/P-19 Combination

Leather Cutting Mills

Lime Ball Mills, Planetary Mills, P-2

Materials research Planetary Mills, P-4, P-5

Mechanical alloying/activation

Planetary Mills, P-4

Metallurgy Planetary Mills, P-1, P-9

Minerals Ball Mills, Planetary Mills, P-1, P-13, P-9

Mining Ball Mills, Planetary Mills, P-1, P-13, P-9

Ores Ball Mills, Planetary Mills, P-1, P-13, P-9

Pharmaceuticals P-14, P-2

Pigments Ball Mills, Planetary Mills, P-2

Plants Cutting Mills, P-2, P-14

Plastics Cutting Mills, P-14

Refractory materials

Ball Mills, Planetary Mills, P-1, P-13, P-9

Rocks Ball Mills, Planetary Mills, P-1, P-13, P-2, P-9

RoHS Cutting Mills, P-0, P-9, P-14

Rubber Cutting Mills, P-14

Sediments Ball Mills, Planetary Mills, P-2, P-9

Slags Planetary Mills, P-1, P-9

Soil research Ball Mills, Planetary Mills, P-1, P-13

Spectroscopy Ball Mills, Planetary Mills, P-14

Spices Cutting Mills, P-14

Tablets Ball Mills, Planetary Mills, P-2

Textiles Cutting Mills

Wood Cutting Mills, P-14

8

FRITSCH premium line and classic line

The FRITSCH premium principleMaking the best even better: With the FRITSCH premium principle we go one step

further – because even proven and well-tried laboratory mills can always be improved, especially

in detail. Therefore we listened intensively to our customers and continuously collected sugges-

tions for improvement from their daily practical work. This has resulted in the creation of new

instrument concepts that raise our own standards: the FRITSCH premium line is growing.

Due to increased performance all models of the FRITSCH premium line are more powerful than comparable

instruments. And more practice-orientated equipment elements make working with them even easier, more

comfortable, faster and safer. For premium results and absolute reliability. FRITSCH premium line – the

new high-tech standard for the modern laboratory.

In the FRITSCH premium line

you fi nd 5 high-tech laboratory

mills for various applications:

functionally designed to the

smallest detail, even easier to

operate, even more powerful,

faster and safer.

Planetary Micro Mill P U LV E R I S E T T E 7premium line

With highest rotation speeds for ultra-fi ne grinding results down to the nano range

Page 10 – 11

Jaw Crusher P U LV E R I S E T T E 1premium line

Extremely strong with up to 3 kW drive power

Page 20

9

FRITSCH classic line – international standard

Worldwide, laboratory mills of the FRITSCH classic line are standard

for the most diverse applications in sample preparation. The brand

PULVERISETTE is an international synonym for fast size-reduction, easy

handling, reliable reproducibility and long service life even under con-

tinuous, heavy duty usage.

Planetary Mono Mill P U LV E R I S E T T E 6 premium line

For fast and powerful wet and dry grinding down to the nano range

Variable Speed Rotor Mill P U LV E R I S E T T E 1 4 premium line

With multi-functional tool system for impact rotor, cutting rotor and knife insert

Disk Mill P U LV E R I S E T T E 1 3 premium line

For effi cient fi ne grinding of hard-brittle to medium-hard solids

Page 22Final test phase

available 2014Final test phase

available 2014

10

FRITSCH Milling

The compact design of the

PULVERISETTE 7 premium line

combines maximum performance,

exceptional safety and quiet running

with minimal space requirements.

Simple, precise logging is

ensured with perfect integration

into the IT structure of your

laboratory through integrated

USB interfaces.

FRITSCH Planetary Mills premium line

A Q U A N T U M L E A P I N T O T H E N A N O C L A S S – E X T R E M E LY H I G H - S P E E D M I L L I N G

W I T H S U N K E N B O W L S R O TAT I N G AT U P T O 1 1 0 0 R P M .

Discover a completely new dimension of high-tech milling: The

grinding bowls sunk into the disk enable to achieve revolutionary

rotation speeds of up to 1100 rpm at acceleration 95 times

that of gravity. The result: signifi cantly shorter grinding times

and the fi nest possible grinding results down to the nano range.

I D E A L F O R

PHARMACEUTICALS

MECHANICAL ALLOYING

METALLURGY

CERAMICS

MATERIAL RESEARCH

GEOLOGY AND

MINERALOGY

CHEMISTRY

BIOLOGY

Easy, intuitive user navigation is guaranteed by the

ergonomically designed touch screen featuring

a particularly logical menu structure in 10 languages.

Analytical measuring with EASY GTM – Gas pressure and

temperature measuring system

Transform your PULVERISETTE 7 into an analytical

measuring system by using two EASY GTM-bowls with

special lid and a transmitter as well as a receiver board.

The advantage: Simple and easy monitoring of thermal

effects, physical and chemical reactions or increase or

decrease in pressure due to continuous measurement

of gas pressure and temperature directly in the grinding

bowl. The mill is automatically controlled in a manner that

the set parameters are not exceeded. Especially practical:

The receiver unit needs only to be inserted and adjusted

just once – regardless of the number of EASY GTM-bowls

used. EASY GTM grinding bowls are available in seven

different materials with a bowl volume of 80 ml.

PULVERISETTE 7 premium line

combines maximum performance,

exceptional safety and quiet running

with minimal space requirements.

Simple, precise logging is

ensured with perfect integration

Added time savings and reliability

due to the ability to change bowls in

seconds and the unique SelfLOCK

system.

11

REVOLUTIONARY SELFLOCK-TECHNOL -

OGY : PROVIDES AN EXTREMELY FAST

BOWL CHANGE IN JUST TWO MOTIONS.

Planetary Micro MillPULVERISETTE 7 premium line

High performance for smallest quantities

Working principle Impact force

Optimal for material type (for materials table and material type defi nitions, see page 7) Hard, medium-hard, brittle

Number of working stations 2

Grinding bowl sizes 20, 45, 80 ml

Grinding ball diameter 0.1 – 20 mm


Min. sample quantity 0.5 ml

Max. sample quantity 70 ml

Final fi neness (depending on the material) < 0.1 µm

Typical grinding time down to analytical fi neness 3 min

Grinding process Dry/wet

Grinding in inert gas Yes

Gas pressure and temperature measurement Yes

Rotational speed of main disk 100 – 1100 rpm

Transmission ratioplanetary disk/grinding bowl

i relative

= 1 : -2

Effective diameter of main disk 140 mm

Centrifugal acceleration (g = 9.81 m/s2) 95 g

Interfaces USB

Electrical details100-240 V/1~,

50-60 Hz, 1100 watt

Motor shaft power in accordance with VDE 0530, EN 60034 0.94 kW

Weight 44 kg

Dimensions w x d x h Bench top instrument: 40 x 58 x 36 cm

It could not be simpler or more reliable. The revolutionary

SelfLOCK bowls of the FRITSCH premium line now form a

single unit with the lid for the fi rst time. They can be fi rmly

and securely closed with one motion and snap just as tightly

and securely into the mill with a second motion.

12

FRITSCH Milling

FRITSCH Planetary Mills classic line

2 working stations4 working stations

FRITSCH Planetary Mills of the classic line are ideally suitede

for wet and dry comminution of hard, medium-hard, brittle

and fi brous materials. Samples can be processed from a few

milligrams to several kilograms at a wide range of fi neness

levels down to less than 1 µm. They are absolutely reliable,

especially easy to operate and clean. Matching grinding parts

of various materials are also available to provide maximum

protection against undesired contamination of the samples.

Planetary MillPULVERISETTE 5 classic line

Fast and fi ne

Working principle Impact force Impact force

Optimal for material type(for materials table and material type defi nitions, see page 7)

Hard, medium-hard, soft, brittle, tough, moist Hard, medium-hard, soft, brittle, tough, moist

Number of working stations 4 2

Grinding bowl sizes 80, 250, 500 ml 80, 250, 500 ml

Grinding ball diameter 0.1 – 40 mm 0.1 – 40 mm

Max. feed size (depending on the material) 10 mm 10 mm

Min. sample quantity 10 ml 10 ml

Max. sample quantity 900 ml 450 ml

Final fi neness (depending on the material) < 1 µm < 1 µm

Typical grinding time down to analytical fi neness 4 min 4 min

Grinding process Dry/wet Dry/wet

Grinding in inert gas Yes Yes

Gas pressure and temperature measurement Yes Yes

Rotational speed of main disk 50 – 400 rpm 50 – 400 rpm

Transmission ratioplanetary disk/grinding bowl

i relative


= 1 : –2.19

Effective diameter of main disk ~ 250 mm ~ 250 mm

Centrifugal acceleration (g = 9.81 m/s2) 22 g 22 g

Interfaces Yes Yes

Electrical details100-120/200-240 V/1~,

50-60 Hz, 1300/1600 watt100-120/200-240 V/1~,

50-60 Hz, 1300/1600 watt


1.5 kW 1.5 kW

Weight 120 kg 100 kg

Dimensions w x d x h Bench top instrument: 58 x 67 x 57 cm Bench top instrument: 58 x 67 x 57 cm

I D E A L F O R

GEOLOGY AND MINERALOGY

MATERIALS TECHNOLOGY

MECHANICAL ALLOYING/ACTIVATION

SAMPLE PREPARATIONFOR ANALYSIS

CERAMICS

CHEMISTRY

BIOLOGY

PHARMACEUTICALS

METALLURGY

onss

13

Free FRITSCH sample grinding!Send us your sample – we will advise you which mill is the right one for

you. Or take a look in the practical grinding report database by logging

on www.fritsch.de/solutions.

Planetary Mono MillPULVERISETTE 6 classic line

Planetary Micro Mill PULVERISETTE 7 classic line

Vario-Planetary MillPULVERISETTE 4 classic line

High performance in minimum space

Ideal for the smallest quantitiesUnique – a variable transmission ratio

Impact force Impact force Impact force

Hard, medium-hard, soft, brittle, tough, moist Hard, medium-hard, brittle, moist Hard, medium-hard, soft, brittle, tough, moist

1 2 2

80, 250, 500 ml 12, 45 ml 12, 45, 80, 250, 500 ml

0.1 – 40 mm 0.1 – 15 mm 0.1 – 40 mm

10 mm 5 mm 10 mm

10 ml 0.5 ml 0.5 ml

225 ml 40 ml 450 ml

< 1 µm < 1 µm < 1 µm

4 min 3 min 4 min

Dry/wet Dry/wet Dry/wet

Yes Only possible in glove box Yes

Yes No Yes

100 – 650 rpm 100 – 800 rpm 0 – 400 rpm

i relative


= 1 : –2 Variable

121.6 mm 140 mm ~ 250 mm

29 g 50 g 22 g

Yes Yes Yes

100-120/200-240 V/1~,50-60 Hz, 1100 watt

100-120/200-240 V/1~,50-60 Hz, 880 watt

200-480 V/3~,50-60 Hz, 6000 watt

0.75 kW 0.37 kW 2.2 kW supporting disk, 2.2 kW planetary disk

63 kg 35 kg 320 kg

Bench top instrument: 37 x 53 x 50 cm Bench top instrument: 37 x 53 x 50 cm Floor instrument: 60 x 80 x 110 cm

14

FRITSCH Milling

compatibleGTMGTM

FRITSCH Grinding Bowls and Grinding Balls

To avoid the risk of contaminating the samples with abrasion

from grinding elements, we offer grinding bowls and grinding

balls in 8 different materials for the FRITSCH classic line

and premium line. In normal cases, grinding bowls and balls

of the same material are used.ed.

To shorten the grinding time, grinding bowls and balls with

a higher density and correspondingly higher impact energy

can be used.

THE RIGHT MATERIAL FOR EVERY APPLICATION

G A S S I N G L I D

Through the use of a special lid on the grinding bowl, you can

also grind your samples in inert atmospheres. Two valves

allow for easy and safe fi lling of the bowls with inert gas

while they are fi rmly clamped in the mill. A special additional

Lock-System is required for gas-tight removal and transport.

GTM – GAS PRESSURE ANDTEMPERATURE MEASURING SYSTEM

With this Gas Pressure and Temperature Measurement

System developed in cooperation with the Fraunhofer

Institute for Applied Materials Research (IFAM) in Dresden,

the Planetary Mills PULVERISETTE 4, PULVERISETTE 5

and PULVERISETTE 6 of the FRITSCH classic line can be

transformed into analytical measurement systems.

15

FRITSCH Ball Mills

FRITSCH Ball Mills are the most effective laboratory mills

for rapid batchwise comminution of medium-hard to very

hard samples down to the fi nest particle sizes. The grinding

can take place dry or wet. Grinding sets of many different

materials are available. FRITSCH ball mills are also the ideal

lab assistants for mixing and homogenising.

Vibratory Micro MillPULVERISETTE 0

Mini-MillPULVERISETTE 23

Fine comminution and sieving in one unit

The smallest instrument for small quantities


Optimal for material type (for materials table and

material type defi nitions, see page 7)

Medium-hard, brittle, temperature-sensitive, moist

Medium-hard, brittle, moist

Grinding bowl sizes – 5, 10, 15 ml

Grinding ball diameter 50 – 70 mm 0.1 – 15 mm


Min. sample quantity 1 ml 0.01 ml

Max. sample quantity 10 ml 5 ml

Final fi neness (depending on the material) 10 μm 5 μm

Typical grinding time (depending on the material) 10 min 2 min

Cryogenic grinding YesLiquid nitrogen can be used

for pre-cooling in the PTFE bowl

Grinding process Dry/wet Dry/wet

Grinding bowl oscillations per minute 3000 – 3600 at 1 – 3 mm amplitude 900 – 3000 at 9 mm amplitude

Electrical details 100-240 V/1~, 50-60 Hz, 50 watt 100-240 V/1~, 50-60 Hz, 90 watt

Weight 21 kg 7 kg

Dimensions w x d x h Bench top instrument: 37 x 40 x 20 cm Bench top instrument: 20 x 30 x 30 cm

I D E A L F O R

PHARMACEUTICALS AND MEDICINE

CHEMICAL ANALYSIS

ENVIRONMENTAL RESEARCH

BIOTECHNOLOGY

FORENSIC ANALYSIS

MATERIAL TECHNOLOGY

RoHS

16

FRITSCH Milling

FRITSCH Cutting Mills

Cutting Mills are ideal for comminution of soft to medium-

hard, fi brous or tough materials as well as plastics and for

preparation of heterogeneous mixtures. The samples are

comminuted by cutting and shearing forces, and the selected

sieve insert determines the fi nal fi neness.

Various knife geometries and replaceable blades ensure

maximum fl exibility and durability. Cutting tools of various

steel types as well as of hardmetal tungsten carbide can be

used for controlling the abrasion problems.

Cutting MillPULVERISETTE 15

Effective and inexpensive

Working principle Cutting

Optimal for material type (for materials table and material type defi nitions, see page 7) Medium-hard, soft, fi brous

Max. feed size (depending on the material and funnel) 70 x 70 mm

Max. throughput (depending on the material and sieve size) 50 l/h

Sieve inserts 0.25 – 6 mm

Feeding Batchwise/continuous

Materials of the cutting tools Tool steel, chromium-free steel

Motor speed (depending on voltage and frequency) 2800 – 3400 rpm

Electrical details400 V/3~, 50 Hz, 1900 watt

230-240 V/1~, 50 Hz, 2100 watt100-120 V/1~, 60 Hz, 1850 watt

Motor shaft power in accordance with VDE 0530, EN 600341.5 kW for all motors,

except 1.1 kW for 100-120 V/1~ motor

Weight 37 kg

Dimensions w x d x hTable-mounting or on stand:

42 x 48 x 69 cm

I D E A L F O R

PLASTICS AND TEXTILES

AGRICULTURE AND FORESTRY

ENVIRONMENT

RoHS

ANALYTIC

CONSTRUCTION MATERIALS

CHEMISTRY

FOODSTUFFS

17

Unmatched ease of cleaning!

FRITSCH cutting mills allow the entire

grinding chamber to be opened without tools

in seconds with just two simple motions

for complete cleaning of all grinding parts.

Unbeatably fast, simple and effi cient!

Universal Cutting MillPULVERISETTE 19

Power Cutting MillPULVERISETTE 25

Cutting Mill CombinationPULVERISETTE 25/19

Easy cleaning due to simply exchangeable cutting tools

Powerful pre-crushing even for larger samples

Pre-crushing and fi ne comminution in a single step

Cutting Cutting Cutting

Medium-hard, soft, brittle, tough, fi brous Medium-hard, brittle, tough, fi brous Medium-hard, brittle, tough, fi brous

70 x 80 mm 120 x 85 mm 120 x 85 mm

60 l/h 85 l/h 60 l/h

0.20 – 6 mm 1 – 10 mm 0.20 – 6 mm

Batchwise/continuous Batchwise/continuous Batchwise/continuous

Tool steel, hardmetal tungsten carbide, chromium-free steel



2800 – 3400 rpm 300 – 360 rpm 300 - 360 / 2800 – 3400 rpm

400 V/3~, 50-60 Hz, 2000 watt230 V/1~, 50-60 Hz, 2200 watt

100-120 V/1~, 50-60 Hz, 1850 watt400 V/3~, 50-60 Hz, 3240 watt 400 V/3~, 50-60 Hz, 6440 watt

1.5 kW for all motors, except 1.1 kW for 100-120 V/1~ motor

2.2 kW 2.2/1.5 kW

56 kg 75 kg 214 kg

Table-mounting or on stand:44 x 55 x 63 cm

Table-mounting or on stand:45 x 65 x 63 cm

On stand:62 x 82 x 145 cm

18

FRITSCH Milling

FRITSCH Rotor-/Beater Mills

Due to their high grinding energy, Beater Mills are the best

choice for soft to medium-hard and brittle samples – including

plastics. The material is comminuted through impact and

friction forces. The fi nal fi neness of the samples depends on

the selected sieve insert.

To avoid undesired abrasion, the FRITSCH Variable Speed

Rotor Mill PULVERISETTE 14 classic line can be equipped

with rotors made of stainless steel, titanium or with titanium

nitride or tungsten carbide coatings.

Variable Speed Rotor MillPULVERISETTE 14 classic line

Cross Beater MillPULVERISETTE 16

Finest grinding thanks to highest speed

Ideal for soft to medium-hard samples



material type defi nitions, see page 7)

Medium-hard, soft, brittle, fi brous, temperature-sensitive

Medium-hard, brittle


Min. sample quantity 5 – 10 ml 30 – 40 ml

Max. throughput (depending on the material and sieve size)

5 l/h 80 l/h

Sieve inserts 0.08 – 6 mm 0.12 – 10 mm

Feeding Batchwise/continuous Batchwise/continuous

Grinding parts Impact rotor, pin insert, impact bar Cross beater

Materials of the grinding partsStainless steel, pure titanium, TiN-coated steel,

WC-coated steelCast iron, stainless steel

Motor speed 6000 – 20000 rpm 2850 rpm

Electrical details 100-120/200-240 V/1~, 50-60 Hz, 1150 watt400 V/3~, 50 Hz, 1480 watt230 V/1~, 50 Hz, 1590 watt110 V/1~, 60 Hz, 1250 watt


0.55 kW 1.1 kW

Weight 23 kg 38 kg

Dimensions w x d x hBench top instrument:

31 x 48 x 47 cmBench top instrument or on stand:

42 x 45 x 56 cm

I D E A L F O R

ANALYTIC

BIOLOGY

CHEMISTRY


FOODSTUFFS


MINING AND METALLURGY

CERAMICS

PLASTICS AND TEXTILES

PHARMACEUTICALS

ENVIRONMENT/RoHS

19

Mortar Grinder

The FRITSCH Mortar Grinder is an all-purpose mill suitable

for a wide range of materials: hard-brittle to soft-wet and

the popular choice in the chemical/pharmaceutical area. Its

gentle grinding through pressure and friction makes it the

ideal mill for grinding tablets in galenics. To avoid the risk of

contamination, grinding sets are offered in seven different

materials.

Mortar GrinderPULVERISETTE 2

Gentle grinding without thermal effects

Working principle Friction

Optimal for material type (for materials table and material type defi nitions, see page 7)Hard, medium-hard, soft, fi brous, abrasive,

temperature-sensitive


Min. sample quantity 10 ml

Max. sample quantity up to 190 ml

Final fi neness 10 – 20 μm

Grinding process Dry/wet

Grinding parts Mortar bowl with pestle

Motor speed 70/80 rpm

Electrical details 100-120/200-240 V/1~, 50-60 Hz, 250 watt


0.18 kW

Weight 24 kg


I D E A L F 0 R

PHARMACY

FOODSTUFFS

CHEMISTRY

GLASS AND CERAMICS INDUSTRY




20

FRITSCH Milling

FRITSCH Jaw Crushers premium line

The most powerful FRITSCH Jaw Crusher ever: up to 3 kW

drive power ensure an exceptionally high throughput during

pre-crushing. The crushing jaws are completely retractable/

removable for easy cleaning. Integrated dust exhaust channels

provide optimal working conditions.

The combination of the PULVERISETTE 1 premium line withe

the Disk Mill PULVERISETTE 13 premium line (p 22) – with

integrated sample divider – is ideal for automatic and con-

tinuous comminution of large quantities down to analytical

fi neness – including coarse materials.

Jaw CrushersPULVERISETTE 1

premium line (2 models)

Jaw Crusher/Disk MillPULVERISETTE 1 /13

premium line

The premium version for pre-crushing

Coarse and fi ne comminution in a single step – with integrated

sample divider

Working principle Pressure Pressure/shearing force


material type defi nitions, see page 7)Hard, medium-hard, brittle Hard, medium-hard, brittle

Max. feed size (depending on the material) 95 mm resp. 60 mm 95 mm resp. 60 mm


Max. continuous throughput (depending on the material and gap width)

200 kg/h resp. 140 kg/h 150 kg/h

Final fi neness 0.3 – 15 mm 0.1 – 12 mm


Grinding parts Fixed and movable crushing jawsFixed and movable crushing jaws

and grinding disks

Materials of the grinding partsTempered steel, stainless steel,

chromium-free steel, manganese steel, hardmetal tungsten carbide, zirconium oxide

Tempered steel, stainless steel, chromium-free steel resp. hardened steel cast, manganese steel,

hardmetal tungsten carbide, zirconium oxide

Eccentric oscillations 308 movements/min –

Electrical details400 V/3~, 50-60 Hz, 3540 watt resp. 1450 watt

230 V/1~, 50-60 Hz, 1570 watt115 V/1~, 50-60 Hz, 1900 watt

400 V/3~, 50-60 Hz, 3280 watt resp.400 V/3~, 50-60 Hz, 5370 watt


3 kW resp. 1.1 kWP-1, model I: 1.1 kWP-1, model II: 3 kW

P-13: 1.5 kW

Weight 320 kg resp. 305 kg 715 resp. 700 kg

Dimensions w x d x h Bench top instrument: 55 x 90 x 106 cm Floor instrument: 61 x 136 x 177 cm

I D E A L F O R


CHEMISTRY


GLASS INDUSTRY

CERAMICS INDUSTRY

SOIL RESEARCH

ROCKS AND SOILS

21

FRITSCH Jaw Crushers classic line

The Jaw Crusher PULVERISETTE 13 classic line is thee

classic “workhorse” for the pre-crushing of brittle materials.

FRITSCH offers grinding parts for these instruments made

of various steel types, tungsten carbide and zirconium oxide.

The combination with the FRITSCH Disk Mill PULVERI-

SETTE 13 classic line (see page 23) is ideal for automatic e

and continuous comminution of large quantities down to

analytical fi neness – including coarse materials.

Jaw CrushersPULVERISETTE 1

classic line (2 models)

Jaw Crusher/Disk MillPULVERISETTE 1 /13

classic line

The standard for pre-crushingCoarse and fi ne comminution

in a single step

Working principle Pressure Pressure/shearing force


material type defi nitions, see page 7)Hard, medium-hard, brittle Hard, medium-hard, brittle

Max. feed size (depending on the material) 95 mm resp. 60 mm 95 mm resp. 60 mm


Max. continuous throughput (depending on the material and gap width)

200 kg/h resp. 140 kg/h 150 kg/h

Final fi neness 1 – 15 mm 0.1 – 12 mm


Grinding parts Fixed and movable crushing jawsFixed and movable crushing jaws

and grinding disks

Materials of the grinding partsTempered steel, stainless steel,

chromium-free steel, manganese steel, hardmetal tungsten carbide, zirconium oxide

Tempered steel, stainless steel, chromium-free steel resp. hardened steel cast, manganese steel,

hardmetal tungsten carbide, zirconium oxide

Eccentric oscillations 308 movements/min –


230 V/1~, 50-60 Hz, 1570 watt115 V/1~, 50-60 Hz, 1900 watt

400 V/3~, 50-60 Hz,3280 watt resp.

400 V/3~, 50-60 Hz,4610 watt


2.2 kW resp. 1.1 kWP-1, model I: 1.1 kWP-1, model II: 2.2 kW

P-13: 1.5 kW

Weight 205 kg resp. 177 kg 334 resp. 362 kg


I D E A L F O R


CHEMISTRY


GLASS INDUSTRY

CERAMICS INDUSTRY

SOIL RESEARCH

ROCKS AND SOILS

22

FRITSCH Milling

FRITSCH Disk Mill premium line

The FRITSCH Disk Mill PULVERISETTE 13 premium line

is the premium model for effi cient fi ne grinding of hard-

brittle to medium-hard solids: Even more powerful and

safer due to automatic locking of the collecting vessel

and grinding chamber, even easier to operate due to digi-

tal gap display and presentation of all parameters on a

well-designed display.

Disk MillPULVERISETTE 13

premium line

Comminution down to 100 μm – absolutely reproducible with digital display

Working principle Shearing force


material type defi nitions, see page 7)Hard-brittle, medium-hard



Max. throughput (depending on the material) 150 kg/h

Final fi neness 0.1 - 12 mm

Feeding Batchwise/continuous

Grinding parts Fixed and movable grinding disk

Materials of the grinding parts Hardened steel cast, manganese steel, hardmetal tungsten carbide, zirconium oxide

Motor speed 440 rpm

Electrical details 400 V/3~, 50-60 Hz, 1830 watt


1.5 kW

Weight 240 kg


I D E A L F O R


CERAMICS INDUSTRY

ROCKS AND SOILS

GLASS INDUSTRY

SOIL RESEARCH

23

FRITSCH Disk Mills classic line

The FRITSCH Disk Mill PULVERISETTE 13 classic line is

most suited for size reduction within the medium particle

size range. Comminution takes place through pressure and

shearing force.

Based on a new drive concept, the completely modifi ed

FRITSCH Vibrating Cup Mill PULVERISETTE 9 offers an

extra-fast grinding with up to 1500 rpm: extremely quiet and

simple to operate, due to lighter grinding sets, convenient

one-hand lever tensioning and multilingual menu navigation.

Pellet Press For fast and easy preparation of both: solid and highly permeable pellets for X-ray fl uorescence analysis or infrared spectroscopy – manual, hydraulic, easy.• Variable pressure force of up to 250 kN• Simple operation via hand lever• Solid and compact with impact-resistant cladding• Easy cleaning

Disk MillPULVERISETTE 13

classic line

Vibrating Cup MillPULVERISETTE 9

Ideal for comminution down to 100 μm

Fastest comminution thanks to powerful drive

Working principle Shearing force Impact force


material type defi nitions, see page 7)Hard-brittle, medium-hard Hard, brittle, fi brous


Min. sample quantity 20 – 30 ml 10 – 20 ml

Max. throughput (depending on the material) 150 kg/h 250 ml

Final fi neness 0.1 – 12 mm 10 – 20 μm

Feeding Batchwise/continuous Batchwise

Grinding parts Fixed and movable grinding disk Grinding puck with impact rings

Materials of the grinding partsHardened steel cast, manganese steel,

hardmetal tungsten carbide, zirconium oxideTempered steel, chromium-free steel, hardmetal

tungsten carbide, agate, zirconium oxide

Motor speed 440 rpm 600 – 1500 rpm

Electrical details 400 V/3~, 50-60 Hz, 1830 watt230-240 V/1~, 50-60 Hz, 1200 watt100-120 V/1~, 50-60 Hz, 1200 watt


1.5 kW 1.1 kW

Weight 140 kg 267 kg


Pellet PFor fast ananalysis or• Variable p• Simple o• Solid and• Easy clea

I D E A L F 0 R

AGRICULTURE AND ENVIRONMENT

ORE AND GEOLOGY LABORATORIES

SPECTROSCOPY PREPARATION

INFRARED AND X-RAY FLUORESCENCE ANALYSIS


CERAMICS INDUSTRY

ROCKS AND SOILS

GLASS INDUSTRY

SOIL RESEARCH

24

FRITSCH Sieving

FRITSCH Sieve Shakers

With their innovative and practical features, the new

generation of FRITSCH Sieve Shakers satisfy all requirements

for accurate and reproducible sieving analysis and even

exceed requirements in many areas.

These instruments offer maximum comfort and precision

with automatic amplitude control, programme selection,

control and evaluation software as well as high-quality sieve

stack tensioning system.

Vibratory Sieve ShakerANALYSETTE 3 PRO

Quality control through amplitude monitoring

Method of analysis Sieving

Dry sievingMeasuring range: 20 μm – 63 mm

Max. sample quantity (approx.): 2 kgSieving time (approx.): 3 – 20 min

Wet sievingMeasuring range: 20 μm – 10 mm

Max. sample quantity (approx.): 20 – 100 gSieving time (approx.): 3 – 10 min

Micro-precision sievingMeasuring range: 5 μm – 100 μm

Max. sample quantity (approx.): 0.05 – 0.5 gSieving time (approx.): 30 – 60 min

Max. weight of sieve stack 3 kg

Amplitude 0.1 – 3 mm

Amplitude control Automatic

Sieve diameters100 mm, 200 mm or 8“

Max. number of sieves per sieve stack 10 (50 mm height) or 16 (25 mm height)

Max. height of sieve stack 550 mm

Automatic sieve analysis with evaluation software AUTOSIEVE Yes

Testing instrument calibration according to ISO 9001 Yes

Interfaces Yes

Intermittent mode Yes

Memory for 9 sieve programmes Yes

Electrical details 100-240 V/1~, 50-60 Hz, 50 watt

Weight 21 kg


I D E A L F O R

SIEVING

MEASURING THE QUANTITATIVE PARTICLE SIZE

DISTRIBUTION OF SOLIDS AND SUSPENSIONS

SEPARATING

FRACTIONING

25

The top model ANALYSETTE 3 PRO can be integrated into

any quality management system according to DIN EN ISO

9001 as a testing instrument thanks to state-of-the-ar t

electronics and maximum reliability.

FRITSCH Sieve Shakers are available for sieves up to

450 mm in diameter for dry, wet and micro-precision sieving.

The automatic sieving analysis is performed by the control

and evaluation software AUTOSIEVE.

Vibratory Sieve ShakerANALYSETTE 3 SPARTAN

Heavy Duty Analytical Sieve ShakerANALYSETTE 18

The best deal in size separation Ideal for large sample quantities

Sieving Sieving

Measuring range: 20 μm – 63 mmMax. sample quantity (approx.): 2 kg

Sieving time (approx.): 3 – 20 min

Measuring range: 20 μm – 125 mmMax. sample quantity (approx.): 15 kg

Sieving time (approx.): 5 – 60 min

Measuring range: 20 μm – 10 mmMax. sample quantity (approx.): 20 – 100 g

Sieving time (approx.): 3 – 10 min–

– –

3 kg 42 kg

0.5 – 3 mm 0.1 – 2 mm

Manual Automatic

100 mm, 200 mm or 8“200 mm, 250 mm, 300 mm, 315 mm, 350 mm, 400 mm, 450 mm

and 8“, 12“, 16“, 18“

10 (50 mm height) or 16 (25 mm height) 12 (65 mm height)

550 mm 845 mm

Yes Yes

No Yes

No Yes

No Yes

No Yes

100-240 V/1~, 50-60 Hz, 50 watt230 V/1~, 50-60 Hz, 200 watt115 V/1~, 50-60 Hz, 200 watt

21 kg 135 kg

Bench top instrument: 37 x 40 x 20 cm Floor instrument: 58 x 59 x 130 cm

26

FRITSCH Dividing Feeding Cleaning

FRITSCH Sample Division/Feeding/Ultrasonic Cleaning

The instruments of the FRITSCH LABORETTE line will make

your work more effi cient and guarantee reproducible and

representative sample preparation – the foundation for

every precise analysis! The FRITSCH Rotary Cone Sample

Divider creates the optimal basis for reliable analysis of

a representative sample. Its unique combination of three

dividing methods achieves previously unheard of dividing

precision. Variable division ratios and the design in several

variants guarantee adaptation to a wide range of applications

with a dividing accuracy of up to 99.9%.

Rotary Cone Sample DividerLABORETTE 27

Indispensable for representative sample preparation

Division ratio Division 1:8 Division 1:10 Division 1:30

Number of possible sub-samples 8 10 3

MaterialsPOM Plastic

or aluminiumPOM Plastic

or aluminiumPOM Plastic or PTFE-coated

aluminium

Max. particle size 10 mm 10 mm 2.5 mm

Max. sample quantity 4000 ml 2500 ml 300 ml

Capacity of sample bottles 25, 250, 500 ml 25, 250 ml 15, 20, 30 ml

Division Dry/wet Dry/wet Dry/wet

Electrical details230 V/1~, 50-60 Hz, 90 watt115 V/1~, 50-60 Hz, 90 watt

230 V/1~, 50-60 Hz, 90 watt115 V/1~, 50-60 Hz, 90 watt

230 V/1~, 50-60 Hz, 90 watt115 V/1~, 50-60 Hz, 90 watt

Weight 7.7 kg 7.7 kg 7.7 kg

Dimensions w x d x h Bench top instrument: 27 x 45 x 46 cm Bench top instrument: 27 x 45 x 46 cm Bench top instrument: 27 x 45 x 46 cm

I D E A L F O R

REPRESENTATIVE

SAMPLE PREPARATION!

27

The FRITSCH LABORETTE 24 is the ideal instrument for

effi cient feeding of mills, sample dividers, mixers, sieve

shakers, balances and other laboratory instruments.

Both models of the FRITSCH LABORETTE 17 gently clean

sensitive parts such as test sieves, micro-precision sieves,

fi lters, glassware and laboratory instruments and also help

in accelerating chemical reactions as well as dispersing

suspensions.

Vibratory Feeder with V-shaped channel/wide

channel LABORETTE 24

Ultrasonic CleanerLABORETTE 17

(2 models)

For automatic feedingIdeal for gentle cleaning

and dispersing

Useful capacities 5.6 litres resp. 28 litres

Tank dimensionsØ 24 cm, 13 cm deepresp. 50 x 30 x 20 cm

Suspended basket dimensionsØ 21.8 cm, 5 cm high, grid 5 x 5 cm

resp. 45.5 x 24.5 x 5 cm, grid 5 x 5 mm

Max. sound output2 x 240 watt/period, 35 kHz

resp. 2 x 600 watt/period, 35 kHz


115 V/1~, 50-60 Hz, 140 watt

Weight 4.6 kg resp. 14.3 kg

Dimensions w x d x hBench top instrument: Ø 26.5 cm, 27 cm high

resp. 53.5 x 32.5 x 40 cm

Complete length of the conveyance channel 330 mm

Channel overlap 215 mm

Max. feed quantity 2500 g/min

Min. feed quantity 5 g/min

Change of the channelV-shaped channel and U channel

can be easily exchanged

Electrical details200-240 V/1~, 50-60 Hz, 20 watt100-120 V/1~, 50-60 Hz, 20 watt

Weight 12 kg


Technical specifi cations are subject to change without notice.

I D E A L F O R

- SIEVING

- MEASURING THE QUANTITATIVE

PARTICLE SIZE DISTRIBUTION OF

SOLIDS AND SUSPENSIONS

- SEPARATING

- FRACTIONING

Sieve Shakers

SIEVE SHAKERS

2

With FRITSCH, you have chosen an internationally respected manu-

facturer of application-oriented laboratory instruments. For more than

90 years, laboratories worldwide have relied on our experience, quality,

ser vice and innovation – for fast industrial applications as well as

for especially accurate results in control- and research laboratories.

See for yourself.

F R I T S C H . O N E S T E P A H E A D .

EVERYTHING YOU NEED FOR SIEVING

FRITSCH Sieve Shakers

The FRITSCH sieve range is the focused answer to all typical sieving tasks in the laboratory: three

well-conceived instruments for every application, with FRITSCH concepts that make the work

simpler and faster – easy to operate, reliable and long-lasting. For dry, wet and micro-precision siev-

ing, with extensive accessories and the modifi ed analysis software AUTOSIEVE. Typically FRITSCH!

3

F R I T S C H S I E V E S H A K E R S :

C O N V E N I E N T , P R E C I S E , R E L I A B L E

Dry, wet and micro-precision sieving

Simple, ergonomic operation

Fast, reproducible results

Sample quantities between 0.05 g and 15 kg

Sieve diameter from 100 mm to 450 mm, mesh widths from 5 µm – 125 mm

Can be used as testing equipment in accordance with DIN EN ISO 9001

Automatic sieve evaluation with the extensive FRITSCH software AUTOSIEVE

ANALYSETTE 3 PROPrecise sieving

with amplitude control

ANALYSETTE 18Effective sieving

of large quantities

ANALYSETTE 3 SPARTANSimple sieving for

all tasks

4

N E W : I N T E L L I G E N T W E T S I E V I N G

FRITSCH Advantage The specially developed FRITSCH wet

sieving lid with 2 rotation nozzles for an uniform spraying of

the material to be sieved from above and by an additional

interposed sieving ring above the sieve with the largest

amount of fi nely sieved material.

Your benefi t: Improved sieving effect for faster results – and

the most effi cient wet sieving that has ever existed.

FRITSCH Advantage The unique, warp-free FRITSCH

EASYTWIST sieve stack tensioner for tensioning the

sieve stack with high-quality, steel-reinforced plastic

bands. Your benefit: Faster, simpler setup in just a

few steps, unobstructed work without annoying rods,

lower space requirements and more safety. Particularly

beneficial: The tensioning system is already included in

the instrument price.

FRITSCH Advantage The multilingual AUTOSIEVE

programme for controlling the ANALYSETTE 3 PRO

and for automatic evaluation, simple monitoring and

documentation of your sieving results is supplied on a

practical USB stick and is therefore very quickly installed.

All you have to do is to connect a laboratory analysis

balance (see ordering data, accessories for automatic

evaluation of sieve analysis), and then weigh the sieves

before and after sieving using differential weighing.

AUTOSIEVE will do the rest. The software, which is suitable

for Windows 7, XP and Vista, enables simple saving and

retrieving of empty sieve weights, both of single sieves

and complete sieve sets.

FRITSCH Vibratory Sieve Shaker

A N A L Y S E T T E 3 P R O

Precise sieving with automatic amplitude control The high performance Vibratory Sieve Shaker ANALYSETTE 3 PRO offers everything you need for fast

determination of quantitative particle size distribution in the laboratory. As a shaking sieve system

with an electromagnetic drive oscillates the sieve stack into regulated vertical oscillations, and is the

ideal solution for sieving sample quantities up to 2 kg and a measurement range from 5 µm to 63 mm.

The ANALYSETTE 3 PRO is perfectly suited for fast quality control of incoming and outgoing products,

offers user-friendly operation and is low-noise, robust and long-lasting.

the instru

FRITSCH

program

and for a

documen

practical

All you h

balance (

evaluatio

before a

AUTOSIEV

for Windo

retrieving

and comp

1 2 3

5

Especially simple

The following functions can be conveniently controlled via the keyboard:

Programme selection – You can store up to 9 individual sieve programmes

to make your work even easier.

Intermittent mode – For sieving voluminous material with low density to

reduce the sieving time.

Micro- and micro-intermittent mode – For micro-sieving of fi ne materials

in the range from 5 µm to 100 µm.

Energy-saving mode – the instrument switches automatically to standby

Especially safe The optimum power

consumption using the variable sieving

frequency of the ANALYSETTE 3 PRO

prevents a warming up of the sieving

system.

Especially effi cient Up to 10 test sieves

can be used simultaneously per work-

ing cycle – allowing up to 5 sieving

operations (interposed sieve pan and

sieve alternately) to be performed at

the same time.

Especially clever All functions can

be controlled via a RS232 interface.

The inter face and AUTOSIEVE allow

inspection of the sieving process via an

online comparison of the set and actual

amplitude.

FRITSCH Advantage AMPCONTROL

for setting constant amplitude, which is

automatically monitored and regulated.

Your advantage: Guaranteed constant

amplitude, meaning precisely repro-

ducible sieving results in accordance

with DIN 66165 and the possibility to

calibrate and validate your ANALY SETTE

3 PRO as an inspection instrument in

inspection of measuring and testing

equipment according to ISO 9001.

ANALYSETTE 3 PRO

S TA N D A R D S - C O M P L I A N T F O R I N T E G R AT I O N

I N T O I S O 9 0 0 1 Q U A L I T Y M A N A G E M E N T

Especially convenient All important

sieving parameters such as sieving

time and amplitude are entered directly

via the clearly organised, ergonomically

installed soft touchpad with digital dis-

play.

6

A N A L Y S E T T E 3 S P A R T A N

Simple sieving for all tasks

The little sister of the ANALYSETTE 3 PRO for all typical sieving tasks in the laboratory with optical

adjustment of the amplitude on the running instrument. Complete with the practical FRITSCH

sieve stack tensioning system EASYTWIST and the possibility of automatic evaluation of the sieve

analysis using the extensive FRITSCH evaluation software AUTOSIEVE.

6

sieve stack tensioning system EASYTWIST and the possibility of automatic evaluation of the sieve

analysis using the extensive FRITSCH evaluation software AUTOSIEVE.

ANALYSETTE 3 SPARTAN

Especially practical Optical display of

the amplitude during sieving.

Up to 10 test sieves can be used simul-

taneously per working cycle – allowing up to

5 sieving operations (interposed sieve pan

and sieve alternately) to be performed at the

same time.

FRITSCH Advantage The easy-to-use and

time-saving sieve stack tensioner with steel-

reinforced plastic bands is included in the

instrument price.

The optimum power consumption using the

variable sieving frequency of the ANALY-

SETTE 3 SPARTAN prevents warming up of

the sieving system.

FRITSCH Vibratory Sieve Shaker

Exact entry of the sieving time via a precise

digital timer on the ergonomically installed

and robust soft touchpad.

Especially simple Manual adjustment of the

amplitude.

7

Y O U R S I E V E S H A K E R B E C O M E S A M I L L

FRITSCH Advantage With just a few motions, your Sieve Shaker can be

transformed into the Vibratory Micro Mill PULVERISETTE 0 for grinding and

homogenising small sample quantities (fi lling volume 1 to 10 ml, feed

particle size < 5 mm). And with the special FRITSCH cryo-box, grinding

is even possible at low temperatures with liquid nitrogen. The ANALY-

SETTE 3 SPARTAN enables stable, uniform vibration in connection

with the grinding set – the perfect milling solution!

The corresponding accessories can be found in the leafl et Ball

Mills or at www.fritsch.de.

R B E C O M E S A M I L L

ew motions, your Sieve Shaker can be

o Mill PULVERISETTE 0 for grinding and

ties (fi lling volume 1 to 10 ml, feed

special FRITSCH cryo-box, grinding

s with liquid nitrogen. The ANALY-

niform vibration in connection

milling solution!

be found in the leafl et Ball

PULVERISETTE 0 Vibratory Micro Mill

TECHNICAL DATA

ANALYSETTE 3 PRO ANALYSETTE 3 SPARTANMethod of analysis Sieving SievingDry sieving Measuring range 20 µm – 63 mm* 20 µm – 63 mm*Max. sample quantity (approx.) for sieves < 63 mm: up to 2 kg* for sieves < 63 mm: up to 2 kg* for sieves < 100 µm: up to 100 g* for sieves < 100 µm: up to 100 g*Sieving time (approx.) 3 – 20 min* 3 – 20 min*Wet sievingMeasuring range 20 µm – 10 mm 20 µm – 10 mmMax. sample quantity (approx.) 20 – 100 g* 20 – 100 g*Sieving time (approx.) 3 – 10 min* 3 – 10 min* Micro-precision sievingMeasuring range 5 µm – 100 µmMax. sample quantity (approx.) 0.05 – 0.5 g*Sieving time (approx.) 30 – 60 min* Max. weight of sieve stack 3 kg 3 kgAmplitude 0.1 – 3 mm 0.5 – 3 mmAmplitude control automatic manualSieve diameters 100 mm, 200 mm or 8“ 100 mm, 200 mm or 8“ Max. number of sieves per sieve stack 10 (50 mm height) 10 (50 mm height) or 16 (25 mm height) or 16 (25 mm height)Max. height of sieve stack 550 mm 550 mmAutomatic sieve analysis with evaluation software AUTOSIEVE Yes YesTesting instrument calibration according to ISO 9001 Yes NoInterface Yes NoIntermittent mode Yes NoMemory for 9 parameter combinations Yes NoConvertible to Vibratory Micro Mill PULVERISETTE 0 Yes YesElectrical details 100-240 V/1~, 50-60 Hz, 50 watt 100-240 V/1~, 50-60 Hz, 50 wattWeightNet/gross 21 kg / 26 kg 21 kg / 26 kgDimensions w x d x hBench top instrument 37 x 40 x 20 cm 37 x 40 x 20 cmPacking details w x d x hCardboard box 50 x 43 x 30 cm 50 x 43 x 30 cm Emissions value of workplace according to DIN EN ISO 3746:2005 (depending on

the material to be sieved and instrument confi guration) approx. 63 dB(A) approx. 63 dB(A)Order no. 03.7020.00 03.8020.00*Depending on the material to be sieved and the sieves used

8

Sieves

For dry and wet sieving with mesh

widths from 20 µm to 63 mm. All are

especially light, robust and manu-

factured in high quality (no soldered

seam!). Highly alloyed stainless steel

protects against corrosion and simpli-

fi es cleaning. Groove-free mesh tran-

sitions prevent contamination of the

sieving material. Available in accor-

dance with ISO 3310 -1 or ASTM E-11-

1995 in the diameters 200 mm (height

50 mm or 25 mm), 100 mm (height

40 mm) or 8“ (height 2“). Every sieve is

laser-engraved, optically measured and

delivered with a compliance certifi cate.

FRITSCH Micro-Precision Sieves

Available only from FRITSCH: With the

micro-precision sieves, the ANALY-

SETTE 3 PRO is suitable for wet-sieving

of fi ne materials from 5 µm to 100 µm

and for dry sieving of the smallest sam-

ple quantities from 0.05 – 0.5 g. The

micro-precision sieves of pure nickel

foil with a sieve diameter of 100 mm

feature a large open sieving surface.

Blockages are reliably prevented by the

etched-in holes that widen toward the

bottom. The matching clamping set,

sieve clamping lid, sieve pan, sieve

spacer and fast locking clamp along

with the large sieve surface permit

effi cient sieving.

Sieve clamping lid, sieve pans and

interposed sieve pans for dry sieving

For observation of the sieving process,

sieve clamping lids made of plexiglas

are available for FRITSCH test sieves

of 100 mm or 200 mm/8“ diameter.

You also receive a clamping lid made

of polyamide (without window) to

sieve materials for which metallic

contamination must be avoided. Of

course, we also offer corresponding

sieve pans and sieves made of plastic.

Sieve pans and interposed sieve pans

for multiple sieving operations in a

single process are available in stainless

steel for all sieve sizes.

FRITSCH Accessories

A C C E S S O R I E S A N A L Y S E T T E 3

9

Sieve clamping lid, interposed sieve

rings and sieve pans for wet sieving

Only available from FRITSCH: During

wet sieving with test sieves (200 mm/

8“), the practical clamping lid with

2 rotation nozzles ensures an uniform

spraying of the sieving material and an

optimal sieving effect. Special inter-

posed sieving rings with three nozzles

are available for simultaneous spraying

of the top and bottom sieves. A sieve

clamping lid of plexiglas with 1 nozzle

is also offered for wet sieving with

100 mm test sieves. The corresponding

sieve pans with outlet are available for

all sieve sizes.

Universal sieve tensioning system

TorqueMaster

For precise results: The electrically

tensioned and easy-to-operate FRITSCH

TorqueMaster applies constant and

reproducible tensioning forces to the

sieve stack through precisely controlled

fastening of the sieve clamping lid.

Essential when using the ANALYSETTE

3 PRO as inspection instrument

according to ISO 9001.

Sieving aids

For dry sieving of materials with a high

share of fi ne particles, 10 mm agate

balls or 20 mm rubber balls should be

used as sieving aids for medium and

large sieves and 5 mm agate balls

for fi ne sieves. Your advantage: They

prevent clogging of the sieve mesh.

Gentle cleaning: LABORETTE 17

Clean the sensitive test sieves and micro-precision sieves intensively and gently

with the FRITSCH Ultrasonic Cleaners LABORETTE 17. This allows you to avoid

undesired contamination and extend the service life of the sieves. Two volume

sizes are available: 5.6 l or 28 l.

More information at www.fritsch.de

C E R T I F I C AT E SFor certifi cation of the ANALYSETTE 3 PRO as an inspection instrument, a 3.1 EN 10204 inspection certifi cate

as well as a form for IQ/OQ documentation are available. A 3.1 EN 10204 inspection certifi cate is also

offered for FRITSCH test sieves in accordance with ISO 3310-1.

Of course, we would also be happy to recertify your Vibratory Sieve Shaker ANALYSETTE 3 PRO and FRITSCH

test sieves according to ISO 3310-1 at our headquarters in Idar-Oberstein or directly at your location.

IQ/OQ documentation is also available for the ANALYSETTE 3 SPARTAN.

10

ww

FRITSCH Heavy Duty Analytical Sieve Shaker

A N A L Y S E T T E 1 8

Especially reproducible Constant ampli-

tude at all times due to automatic ampli-

tude control with continuous acceleration

measure ment of the whole sieve stack.

For sieving of fi ne-grained materials or agglom-

erates, the use of for example vulkollan cubes

are recommended.

Effective sieving of large quantities

The ANALYSETTE 18 is the robust, Heavy Duty Analytical Sieve Shaker from FRITSCH. It can

effortlessly sieve up to 15 kg of material between 20 µm and 125 mm. The three-dimensional

sieving motion ensures particularly fast sieving results without manual re-sieving, and also optimal

reproducibility.

FRITSCH Advantage Universal support

plate for sieves with diameters of 200, 250,

300, 315, 350, 400 and 450 mm as well as

8, 12, 16 or 18“. Sieves with mesh width from

20 µm to 125 mm in accordance with ISO

3310-1 and ASTM E-11-1995 are available.

FRITSCH Ad

plate for sieve

300, 315, 350

8, 12, 16 or 18

20 µm to 125

3310-1 and A

e-grained materials or agglom-

f for example vulkollan cubes

d.

Especially comfortable The ANALYSETTE

18 is operated by remote control via a se-

parate, handy operating unit.

11

TECHNICAL DATA

ANALYSETTE 18Method of analysis SievingDry sieving Measuring range 20 µm – 125 mm*Max. sample quantity (approx.) 15 kg*Sieving time (approx.) 5 – 60 min* Max. weight of sieve stack 42 kgAmplitude 0.1 – 2 mmAmplitude control AutomaticSieve diameters 200 mm, 250 mm, 300 mm, 315 mm, 350 mm, 400 mm, 450 mm and 8“, 12“, 16“, 18“ Max. number of sieves per sieve stack 12 (65 mm height)Max. height of sieve stack 845 mmAutomatic sieve analysis with evaluation software AUTOSIEVE YesTesting instrument calibration according to ISO 9001 YesInterface YesIntermittent mode YesMemory for 10 parameter combinations Yes

ANALYSETTE 18Electrical details 230 V/1~, 50-60 Hz, 200 watt 115 V/1~, 50-60 Hz, 200 watt Weight Net/gross 135 kg / 157 kgDimensions w x d x hFloor instrument 58 x 59 x 130 cmPacking details w x d x hWooden case 84 x 79 x 55 cmEmissions value of workplaceaccording to DIN EN ISO 3746:2005(depending on the material to be sieved

and instrument confi guration) approx. 73 dB(A)Order no. 230 V/1~, 50 – 60 Hz 115 V/1~, 50 – 60 Hz 18.3020.00 18.3010.00

* Depending on the material to be sieved and the sieves used

FRITSCH Advantage The multilingual

AUTO SIEVE programme for automatic

evaluation, simple monitoring and docu-

mentation of your sieving results is sup-

plied on a practical USB stick and is

therefore very quickly installed. All you

have to do is to connect a laboratory

analysis balance, and then weigh the

sieves before and after sieving using

differential weighing. AUTOSIEVE will do

the rest. The software, which is suitable

for Windows 7, XP and Vista, enables

simple saving and retrieving of empty

sieve weights, both of single sieves and

complete sieve sets (see ordering data,

accessories for automatic evaluation of

sieve analysis).

ANALYSETTE 18

Especially practical and safe The

ANALYSETTE 18 is supplied with the

TwinNut quick fastening system for

sieves and clamping lids. This safely

ensures constant tensioning pressure

and stability of the sieve stack.

Especially effi cient Up to 12 test

sieves (65 mm height) with sieve pans

and lid can be used per working cycle.

closed opened

12

FRITSCH ANALYSETTE 3

O R D E R I N G D ATAOrder no. Article

VIBRATORY SIEVE SHAKER ANALYSETTE 3 PRO + SPARTAN

Instrument without clamping lid, test sieves and sieve pan03.7020.00 Model PRO, for 100-240 V/1~, 50-60 Hz03.8020.00 Model SPARTAN, for 100-240 V/1~, 50-60 Hz

Accessories for dry sieving31.2020.00 Clamping lid plexiglas for test sieves 200 mm/8“ dia.31.2050.00 Clamping lid polyamide (without window) for all test sieves

up to 200 mm/8“ dia.31.2100.00 Sieve tensioning system TorqueMaster (consisting of clamping lid plexiglas

for test sieves 200 mm/8“ dia. and electrical tool 100-240 V/1~, 50-60 Hz)31.2010.00 Clamping lid plexiglas for test sieves 100 mm dia.31.1300.03 Interposed sieve pan made of stainless steel 200 mm dia., 50 mm height31.1320.03 Interposed sieve pan made of stainless steel 8“ dia., 2“ height31.1000.03 Sieve pan made of stainless steel 200 mm dia., 50 mm height31.1020.03 Sieve pan made of stainless steel 8“ dia., 2“ height31.1040.03 Sieve pan made of stainless steel 100 mm dia., 40 mm height Accessories for wet sieving31.0400.00 Clamping lid plexiglas with 2 rotation nozzles for test sieves

200 mm/8“ dia.31.1100.03 Sieve pan made of stainless steel with outlet 200 mm dia., 50 mm height31.0240.00 Interposed sieving ring with 3 nozzles for test sieves 200 mm dia.31.1120.03 Sieve pan made of stainless steel with outlet 8“ dia., 2“ height31.0250.00 Interposed sieving ring with 3 nozzles for test sieves 8“ dia.31.2040.00 Clamping lid plexiglas with 1 nozzle for test sieves 100 mm dia.31.1140.00 Sieve pan made of stainless steel with outlet 100 mm dia., 40 mm height

Accessories for micro-precision sieving (Only possible with ANALYSETTE 3 PRO)33.1200.00 Clamping set for micro-precision sieves 100 mm dia.

(= 3 screws + clamps, without clamping lid, sieve pan and micro-precision sieves)

33.1050.00 Clamping lid aluminium/plexiglas with 1 nozzle33.1150.00 Funnel (sieve pan) of aluminium with outlet33.1000.00 Sieve spacer made of aluminium with 2 seal rings33.1100.00 Fast locking clamp made of stainless steel (See ordering example page 13)

Certifi cation96.0010.00 Inspection certifi cate 3.1 EN 10204 for FRITSCH Sieve Shaker

ANALYSETTE 3 PRO96.0200.00 IQ/OQ documentation (questionnaire format - for fi lling out by customer)

for FRITSCH Sieve Shaker ANALYSETTE 3 PRO96.0100.00 IQ/OQ documentation (questionnaire format - for fi lling out by customer) for FRITSCH Sieve Shaker ANALYSETTE 3 SPARTAN31.0900.00 Inspection certifi cate 3.1 EN 10204 for FRITSCH test sieves

according to ISO 3310-1

Accessories for automatic evaluation of sieve analysis03.2900.00 Software AUTOSIEVE for Windows for control and automatic evaluation of sieve analysis03.2600.00 Laboratory analysis balance, up to 4.1 kg (± 0.01 g) with RS232 interface,

incl. computer connection cable

Sieving aids55.0050.05 Agate ball 5 mm dia. (15 pcs. per sieve)55.0100.05 Agate ball 10 mm dia. (10 pcs. per sieve)31.0180.15 Rubber ball 20 mm dia. (5 pcs. per sieve)

Sieve covers31.1200.03 Sieve cover made of stainless steel for test sieves 200 mm dia.31.1220.03 Sieve cover made of stainless steel for test sieves 8“ dia.31.1240.03 Sieve cover made of stainless steel for test sieves 100 mm dia.

Replacement seal rings31.0010.16 Replacement seal ring NBR for test sieves 200 mm/8“ dia.,

50 mm/2“ height, 200 mm dia., 25 mm height31.0520.16 Replacement seal ring NBR for test sieves 100 mm dia.84.0230.15 Replacement seal ring NBR (2 each for 33.1000.00) Sieve pans made of stainless steel with and without outlet are also

available in 200 mm dia., 25 mm height and 8“ dia., 1“ height.

Order no. Article

SPECIAL ACCESSORIES

ANALYSETTE 3 PRO + SPARTAN Accessories for grinding and homogenising small sample quantities31.2010.00 Grinding head for conversion to Vibratory Micro Mill PULVERISETTE 0

Request a detailed Ball Mills leafl et with information on the Vibratory Micro Mill PULVERISETTE 0 as well as mortars and balls.

Accessories for gentle cleaning of test sieves and micro-precision sievesFor gentle cleaning of the test sieves and micro-precision sieves, we recommend the FRITSCH Ultrasonic Cleaners LABORETTE 17.More information can be found at www.fritsch.de.

Recertifi cation of the Vibratory Sieve Shaker ANALYSETTE 3 PRO and FRITSCH test sieves according to ISO 3310-1 on request.

Computer, colour ink jet printer and laser printer on request.

13

O R D E R I N G D ATAOrder no. Article

TEST SIEVES

ANALYSETTE 3 PRO + SPARTAN Frame and mesh wire made of stainless steel with compliance certifi cate 100 mm/200 mm/8“ dia.

ISO 3310-1 • Mesh width • mm/µm ASTM • E-11-1995 • mesh

Order no. 200 mm dia., Order no. 200 mm dia., 50 mm height 50 mm height

30.0000.03 63• mm 30.0080.03 45• mm 30.0100.03 31.5• mm 30.0200.03 25 mm 35.0200.03 1 “ = 25 mm30.0300.03 22.4• mm 35.0300.03 7/8 “ = 22.4 mm30.0400.03 20 mm30.0500.03 19 mm 35.0600.03 3/4 “ = 19 mm30.0600.03 18 mm 30.0800.03 16• mm 35.0800.03 5/8 “ = 16 mm30.0900.03 14 mm 35.0900.03 0.53 “ = 13.2 mm30.1000.03 12.5 mm 35.1000.03 1/2 “ = 12.5 mm30.1100.03 11.2• mm 35.1100.03 7/16 “ = 11.2 mm30.1200.03 10 mm 35.1200.03 3/8 “ = 9.5 mm30.1300.03 9 mm 30.1400.03 8• mm 35.1400.03 5/16 “ = 8 mm30.1500.03 7.1 mm 35.1500.03 0.265 “ = 6.7 mm30.1600.03 6.3 mm 35.1600.03 1/4 “ = 6.3 mm30.1700.03 5.6• mm 35.1700.03 3 1/2 = 5.6 mm30.1800.03 5 mm 35.1800.03 4 = 4.75 mm30.1900.03 4.5 mm 30.2000.03 4• mm 35.2000.03 5 = 4 mm30.2100.03 3.55 mm 35.2100.03 6 = 3.35 mm30.2200.03 3.15 mm 30.2300.03 2.8• mm 35.2300.03 7 = 2.8 mm30.2400.03 2.5 mm 35.2400.03 8 = 2.36 mm30.2500.03 2.24 mm 30.2600.03 2• mm 35.2600.03 10 = 2 mm30.2700.03 1.8 mm 30.2800.03 1.6 mm 35.2800.03 12 = 1.7 mm30.2900.03 1.4• mm 35.2900.03 14 = 1.4 mm30.3000.03 1.25 mm 35.3000.03 16 = 1.18 mm30.3100.03 1.12 mm 30.3200.03 1• mm 35.3200.03 18 = 1 mm30.3300.03 900 µm 30.3400.03 800 µm 35.3400.03 20 = 850 µm 30.3500.03 710• µm 35.3500.03 25 = 710 µm 30.3600.03 630 µm 35.3600.03 30 = 600 µm 30.3700.03 560 µm 30.3800.03 500• µm 35.3800.03 35 = 500 µm 30.3900.03 450 µm 30.4000.03 400 µm 35.4000.03 40 = 425 µm 30.4100.03 355• µm 35.4100.03 45 = 355 µm 30.4200.03 315 µm 30.4250.03 300 µm 35.4200.03 50 = 300 µm30.4300.03 280 µm 30.4400.03 250• µm 35.4400.03 60 = 250 µm 30.4500.03 224 µm 30.4600.03 200 µm 35.4600.03 70 = 212 µm 30.4700.03 180• µm 35.4700.03 80 = 180 µm 30.4800.03 160 µm 35.4800.03 100 = 150 µm 30.4900.03 140 µm 30.5000.03 125• µm 35.5000.03 120 = 125 µm 30.5100.03 112 µm 30.5200.03 100 µm 35.5200.03 140 = 106 µm 30.5400.03 90• µm 35.5400.03 170 = 90 µm 30.5600.03 80 µm 30.5700.03 75 µm 35.5800.03 200 = 75 µm30.5800.03 71 µm 30.6000.03 63• µm 35.6000.03 230 = 63 µm 30.6200.03 56 µm 30.6300.03 53 µm 35.6200.03 270 = 53 µm30.6400.03 50 µm 30.6600.03 45• µm 35.6600.03 325 = 45 µm 30.6800.03 40 µm 30.6900.03 38 µm 35.7000.03 400 = 38 µm30.7000.03 36 µm 30.7200.03 32• µm 35.7200.03 450 = 32 µm 30.7600.03 25• µm 35.7600.03 500 = 25 µm 30.7800.03 20• µm 35.7800.03 635 = 20 µm

• ISO 565 R20/3 (main sizes)

If you would like a test sieve in other diameters, please take note of the ordering examples to the right. Recertifi cation of FRITSCH test sieves according to ISO 3310-1 on request.

Ordering example for test sieves in other diameters200 mm dia., 50 mm height,200 mm dia., 25 mm height, 8“ dia., 2“ height, 100 mm dia., 40 mm height

Deviationfrom standardsieve size

ISO 3310-1mesh widthmm/µm

ASTME-11-1995mesh

Test sieve5 mm mesh width,200 mm dia., height 50 mm= standard size

For example30.1800.03


Test sieve5 mm mesh width,200 mm dia., height 25 mm

Replace 5th position = ”0“ in the order no. by ”1“



Test sieve5 mm mesh width,8“ dia., height 2“




Test sieve5 mm mesh width,100 mm dia., height 40 mm




Test sieves and sieving accessories in other diameters and mesh widths on request.Test sieves made of polyamide are available on request.Test sieves and sieving accessories can not be exchanged or returned!

MICRO-PRECISION SIEVES ANALYSETTE 3 PRO

Frame made of stainless steel, sieve foil and grid made of pure nickel,100 mm dia., according to ISO 3310-3

Order no. Aperture width Open sieve area mesh = number µm = % of holes per linear inch

32.0050.00 Aperture width 5 µm 2.8 101632.0100.00 Aperture with 10 µm 11.2 101632.0150.00 Aperture with 15 µm 9.8 57032.0200.00 Aperture with 20 µm 17.5 57032.0250.00 Aperture with 25 µm 10.4 40332.0300.00 Aperture with 30 µm 14.9 40332.0350.00 Aperture with 35 µm 12.6 31732.0400.00 Aperture with 40 µm 16.5 31732.0450.00 Aperture with 45 µm 8.5 20332.0500.00 Aperture with 50 µm 10.5 20332.0600.00 Aperture with 60 µm 9.3 15932.0700.00 Aperture with 70 µm 12.6 15932.0800.00 Aperture with 80 µm 16.5 15932.0900.00 Aperture with 90 µm 20.9 15932.1000.00 Aperture with 100 µm 25.7 159

Ordering example for micro-precision sievesExample of an order for a sieve stack with 4 micro-precision sieves:1. 4 micro-precision sieves of choice2. 1 clamping lid, aluminium/plexiglas with 1 nozzle (order no. 33.1050.00)3. 1 funnel (sieve pan) made of aluminium with outlet (order no. 33.1150.00)4. 5 sieve spacers made of aluminium with 2 seal rings (order no. 33.1000.00)5. 6 fast locking clamps made of stainless steel (order no. 33.1100.00)6. clamping set for micro-precision sieves with 100 mm dia.Please note: one sieve spacer and two locking clamps more than the number of sieves must be ordered.

14

FRITSCH ANALYSETTE 18

Technical specifi cations are subject to change without notice.

Order no. Article

HEAVY DUTY ANALYTICAL SIEVE SHAKER ANALYSETTE 18

Instrument without test sieves and sieve pan, incl. tensioning and sieve cover

18.3020.00 for 230 V/1~, 50-60 Hz18.3010.00 for 115 V/1~, 50-60 Hz

Accessories for test sieves 400 mm dia.37.1000.01 Sieve pan made of stainless steel 400 mm dia.37.1100.01 Interposed sieve pan made of stainless steel 400 mm dia.37.0010.16 Replacement seal ring NBR for test sieves 400 mm dia.

Accessories for automatic evaluation of sieve analysis03.2900.00 Software AUTOSIEVE for Windows for control and automatic evaluation of sieve analysis

Sieving aids37.0200.16 1 vulkollan cube (minimum 20 cubes per sieve)

Laboratory analysis balance, computer, colour ink jet printer and laser printer on request.

Order no. Article

TEST SIEVES ANALYSETTE 18 Frame and mesh wire made of stainless steel with compliance certifi cate 400 mm dia., useful height 65 mm

Order no. Mesh width ASTM • E-11-1995ISO 3310-1 mm/µm mesh

34.0040.02 125• mm 34.0050.02 100 mm 34.0060.02 90• mm 34.0000.02 63• mm 34.0080.02 45• mm 34.0100.02 31.5• mm 34.0200.02 25 mm 1 “ = 25 mm34.0300.02 22.4• mm 7/8 “ = 22.4 mm34.0400.02 20 mm 34.0600.02 18 mm ~ 3/4 “ = 19 mm 34.0800.02 16• mm 5/8 “ = 16 mm 34.0900.02 14 mm ~ 0.53 “ = 13.2 mm 34.1000.02 12.5 mm ~ 1/2 “ = 12.5 mm 34.1100.02 11.2• mm 7/16 “ = 11.2 mm 34.1200.02 10 mm ~ 3/8 “ = 9.5 mm 34.1300.02 9 mm 34.1400.02 8• mm 5/16 “ = 8 mm 34.1500.02 7.1 mm ~ 0.265 “ = 6.7 mm 34.1600.02 6.3 mm 1/4 “ = 6.3 mm 34.1700.02 5.6• mm ~ no. 31/2 = 5.6 mm 34.1800.02 5 mm ~ no. 4 = 4.75 mm 34.2000.02 4• mm no. 5 = 4 mm 34.2100.02 3.55 mm no. 6 = 3.35 mm 34.2200.02 3.15 mm 34.2300.02 2.8• mm no. 7 = 2.8 mm 34.2400.02 2.5 mm ~ no. 8 = 2.36 mm 34.2600.02 2• mm no. 10 = 2 mm 34.2700.02 1.8 mm 34.2800.02 1.6 mm ~ no. 12 = 1.7 mm 34.2900.02 1.4• mm no. 14 = 1.4 mm 34.3000.02 1.25 mm ~ no. 16 = 1.18 mm 34.3100.02 1.12 mm 34.3200.02 1• mm no. 18 = 1 mm 34.3300.02 900 µm 34.3400.02 800 µm ~ no. 20 = 0.85 mm 34.3500.02 710• µm no. 25 = 0.71 mm 34.3600.02 630 µm ~ no. 30 = 0.6 mm 34.3700.02 560 µm 34.3800.02 500• µm no. 35 = 0.5 mm 34.3900.02 450 µm 34.4000.02 400 µm ~ no. 40 = 0.425 mm 34.4100.02 355• µm no. 45 = 0.355 mm 34.4200.02 315 µm ~ no. 50 = 0.3 mm 34.4300.02 280 µm 34.4400.02 250• µm no. 60 = 0.25 mm 34.4500.02 224 µm 34.4600.02 200 µm ~ no. 70 = 0.212 mm 34.4700.02 180• µm no. 80 = 0.18 mm 34.4800.02 160 µm ~ no. 100 = 0.15 mm 34.4900.02 140 µm 34.5000.02 125• µm no. 120 = 0.125 mm 34.5100.02 112 µm 34.5200.02 100 µm ~ no. 140 = 0.106 mm 34.5400.02 90• µm no. 170 = 0.09 mm 34.5600.02 80 µm 34.5800.02 71 µm ~ no. 200 = 0.075 mm 34.6000.02 63• µm no. 230 = 0.063 mm

• ISO (standard international)

When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-1 or ASTM.

Test sieves and sieving accessories in other diameters and mesh widths on request.

All above mentioned mesh widths are also available as test sieves with 200 mm/8“ dia.

Test sieves and sieving accessories are not subject to exchange!

Documents

classic line - fn-iq.comfn-iq.com/wp-content/uploads/2014/03/fritsch.pdf · Planetary Mill PULVERISETTE 5 classic line Planetary Mono Mill ... results down to colloidal fineness of