Chris R. Godfrey 700 Revival Row Fort Mill, SC 29708 704-965-4138 crsgodfrey@comporium.net

PLC Programming and HMI Design Panel Design AutoCADVFDs Instrumentation Industrial Networks

Detail oriented professional with 26 years in the instrumentation and control field. All phases of electrical project execution including estimates, design, programming and field startup. Self-starter with excellent troubleshooting skills. Able to communicate effectively with both technical and non-technical personnel. Experience with a wide variety of instrumentation, sensors and controllers. Quality conscious.

Employment E & C ENGINEER, Xylem, Charlotte, NC Execution of multiple Electrical Projects under budget and on schedule Review project specs and provide guidance to Sales and Application Engineers Submittal preparation including drawings, BOMs and Control Narratives. Proficiency with AB, Modicon, GE, Automation Direct and Siemens PLCs and HMI. Create P&Ids, loop drawings, schematics and control panel layouts using AutoCAD. Resolve controls issues via remote VPN and dial-in network connections. Mediate and resolve conflicts with vendors, contractors and customers Provide phone support to Service Engineers, contractors and customers. Provide mentoring, guidance and support to Electrical Engineering staff.

I & C ENGINEER, Roberts Filter Group, Darby, Pennsylvania Proficiency with Allen-Bradley, Modicon and Siemens PLCs and HMI. Resolve conflicts with vendors, contractors and customers Prepare estimates/submittals for job bidding process. Create P&Ids, loop drawings and panel layouts using AutoCAD. Provide phone support to Service Engineers working in the field. Field startup of automated controls for municipal water/waste-water filtration plants. Perform staging and quality checks of control panels in house.

SERVICE ENGINEER, Brooks Instrument, Hatfield, Pennsylvania Factory and field service of gas and liquid flow instrumentation. Provide application assistance to customers and sales representatives. Prepare and conduct videotaped and Power Point training classes. Startup and training for automated calibration equipment domestically and

internationally. Developed Access databases to track service visits, phone logs and in-house repairs. Successfully designed, built and tested a portable mass flow calibration stand coming

20% under budget.

8/95 to5/99

5/99 to2/05

5/05 toPresent

SERVICE ENGINEER, Land Combustion, Bristol, Pennsylvania Factory and field service of microprocessor based combustion gas analyzers. Prepare and conduct on site training seminars for customers. Established and expanded service contracts. Conduct field trials for Research and Development personnel. Reduced repair turnaround by over 50 %. Improved test areas and quality procedures.

Education Penn State University - Abington, Pennsylvania Programmable Controllers I – 3 credits

Lincoln Technical Institute - Pennsauken, New Jersey Electronics Technology - 1982 Graduate

Burlington County College - Pemberton, New Jersey 53 Credits - Science and Mathematics 1977 – 1979

Associations Associate Member Instrument Society of America Member Since 1999

6/89 to8/95