Chockfast Product

7/26/2019 Chockfast Product

1/12

ProductOverviewEngineered Epoxy Systems

for Industrial Application

Worldwide

This page will help you become familiarwith the ChockfastFoundation SystemFamily of Products

Since 1959, ITWPhiladelphia Resinshas beenproviding solutions to difficult problems with

a complete line of epoxy products:

Grouting & Chocking Compounds

Auxiliary Products Adhesives and Repair Compounds Primers & Solvents Floor Systems & Speciality Coatings Secondary Containment Systems &

Chemical Resistant Coatings

Grouting & Chocking Compounds

High performance grouting and chocking systems for

machinery installation and foundation repair.

Find these products fast:

ChockfastRed ChockfastRed SG ChockfastBlue

ChockfastOrange

ChockfastBlack ChockfastGray ChockfastChock-Crete

Hot-Running Compressor installed withChockfast Foundation Systems

Chockfast Red Chockfast Red Advantages

Multi-purpose, high strength, deep-pourepoxy grout for fast, permanentalignment of reciprocating and rotating

equipment; also used as a polymerconcrete for fast reconstruction of wornor damaged foundations. ChockfastRed provides excellent vibrationdamping for static and dynamic loads,while its gentle exothermic cure allowsfor single pours from 2" to 18.

CHOCKFAST RED is a user-friendly, chemically resistant, low dusting epoxy grout withhigh compressive, tensile and shear strengths. Excellent compatibility with concrete andsteel minimizes or eliminates horizontal bond-line cracks, common to traditional epoxygrouts. This 24-hr cure structural epoxy is formulated to provide excellent vibration

damping for static and dynamic loads plus permanent monolithic support with intimatecontact between equipment bedplates and underlying concrete foundations. A gentleexothermic reaction during cure reduces cast-in stresses and allows single pours up to18. (For single pours deeper then 18, contact a CHOCKFAST Representative.) Deeppours expedite installation of new equipment. They also reduce costly downtime forfoundation repairs. Low dusting formulation simplifies installation and cleanupprocedures. Tools and mortar mixers can be cleaned with water.


2/12

Turbo generator: Installed on thick-pour ChockfastRed and oil-resistant Chockfast Blue

Chockfast Red SG

PRODUCT APPLICATION AND INSTALLATION GUIDES

TECHNICAL BULLETINS

Bulletin # 559- Deep Pour CHOCKFAST RED VS CONCRETE

Bulletin # 617Q- CHOCKFAST RED - High Strength, Deep Pour Epoxy Grout

Bulletin # 618G- CHOCKFAST RED SG - Thin Pour, Rapid Cure Epoxy Grout

Bulletin # 619- CHOCKFAST RED APPLICATIONS - Special Precautions

Bulletin # 638- CHOCKFAST RED - Compatibility with Concrete and Steel

Bulletin # 669A- CHOCKFAST RED - Extended Aggregate

Bulletin # 1024- CHOCKFAST RED AND SG - Guidelines for Storing, Mixing &Pouring

Versin espaola- Boletn #617N- Boletn #618E- Boletn CFRED_Bombas

MSDS INFORMATION

CHOCKFAST RED

CHOCKFAST RED SG

High flow, rapid cure, high strengthepoxy grout for thinner pours (1 1/2 -4) under equipment skids andbedplates. Chockfast Red SG works

well in cooler temperatures.

Back to the top

Chockfast Blue Chockfast Blue Advantages

High chemical and temperature-resistant, high flow epoxy grout for newor retrofit installations in causticenvironments. Chockfast Blue canalso be used as a substitute for steelsoleplates or rails; normally used in a

thickness range of 1-1 1/2.

CHOCKFAST BLUE is a pourable epoxy compound with excellent resistance to highoperating temperatures. Developed especially for use under hot-running reciprocating

machinery, it provides a strong cap and an excellent oil seal on new foundations.CHOCKFAST BLUE eliminates the need for steel soleplates, which often causesubsequent cracks in foundations. It also strengthens and seals older foundations, whilerestoring their original heights.


3/12

Back to the top


TECHNICAL BULLETINS

Bulletin # 616J- CHOCKFAST BLUE - High Temperature & Chemical Resistant Grout

Versin espaola- Boletn #616

MSDS INFORMATION

CHOCKFAST BLUE

Chockfast Orange Chockfast Orange Advantages

Conveniently pourable, two-component,structural epoxy chock that replacestediously fitted steel shims (or steel

chocks) assuring intimate contact withmachined or un-machined equipmentbedplates. Virtually 100% effectivebearing underneath supported

equipment.

CHOCKFAST ORANGE chockunder a gas compressor engine.

CHOCKFAST ORANGE is a specially formulated for use as a chocking or groutingmaterial. CHOCKFAST ORANGE is designed to withstand severe marine andindustrial environments involving a high degree of both physical and thermal shock. Thecompound is non shrinking and has very high impact and compressive strength. Years of

successful in-service experience have shown the use of CHOCKFAST ORANGE to bea far superior yet less expensive method of establishing and permanently retainingprecise equipment alignment under extreme conditions. CHOCKFAST ORANGE isapproved or accepted for its intended marine use by American Bureau of Shipping,Lloyds Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most

other major regulatory agencies worldwide.

Back to the top


TECHNICAL BULLETINS

Bulletin # 659- CHOCKFAST ORANGE - Epoxy Machinery Chocking Compound

Bulletin # 665A- CHOCKFAST ORANGE HARDENER RATIO GUIDE

Versin espaola- Boletn #659- Boletn #639

MSDS INFORMATION

CHOCKFAST ORANGE

Chockfast Black Chockfast Black Advantages


4/12

Pourable, two-component, deep-pourstructural epoxy chock used to supportand maintain permanent framealignment under hot-running machinery;allows free flow of air betweenequipment and foundation to lower

foundation temperatures and minimizeupward thermal growth; virtually 100%effective bearing underneath supportedequipment; normally poured in

thickness of 1 1/4-2 1/2.

PRODUCT APPLICATION AND INSTALLATIONGUIDES

TECHNICAL BULLETINS

Bulletin # 666- CHOCKFAST BLACK - Epoxy

Machinery Chocking Compound

Versin espaola- Boletn #666- Boletn #629SP

MSDS INFORMATION

CHOCKFAST BLACK

CHOCKFAST BLACK is a cost effective method of maintaining permanent precisealignment of critical equipment. It will withstand severe environments involving highphysical and thermal shock. CHOCKFAST is ideal for use under hot runningreciprocating and rotating machinery due to its excellent resistance to creep and fatigueat high operating temperatures. It is non shrinking and has a very high impact andcompressive strength. Since these resin chocks (1) minimize heat build-up onfoundations, (2) assure precise and unsurpassed contact with bedplates, and (3) providea high coefficient of friction to help hold engines down tight...they reduce possible

bearing or crankshaft damage.

CHOCKFASTBLACK providea highcoefficient offriction tomaintain

alignment.

Backto the top

Chockfast Gray Chockfast Gray Advantages

Highly flowable, two-component, thinpour chock designed to maintainproper alignment and support ofmachinery and equipment; able towithstand severe industrialenvironments with a high degree of both

physical and thermal shock resistance.


TECHNICAL BULLETINS

Bulletin # 656- CHOCKFAST GRAY - AuxiliaryEquipment Chocking Compound

MSDS INFORMATION

CHOCKFAST GRAY

CHOCKFAST Gray was developed as a chocking or grouting compound for use undermarine deck machinery, pumps, generators and steering gears. Industrially, thecompound is used under diesel engines, generators, compressors, pumps, turbines,bearing blocks, crane rails and numerous other applications. CHOCKFAST Grayrequires no special tools or special skills as does chocking with steel. When cast,CHOCKFAST Gray flows readily into chock area filling all voids and conforming to allirregularities. This eliminates the machining of base plates or foundations for a perfectlyfitted chock.

Conveyer Pierssupported onCHOCKFASTGray

Backto the top

Chockfast Chock-Crete Chock-Crete

High performance, precision non-shrink

cement grout.

CHOCK-CRETE is a high performance, non-shrink, precision grout that meets or

exceeds all requirements of the Corps of Engineers CRD C-621 and ASTM C-1107. It isdesigned for a wide range of consistencies from damp pack to high fluidity which meetsthe most demanding job conditions. It is recommended for grouting of anchor bolts,


5/12


TECHNICAL BULLETINS

Bulletin # 625- CHOCK-CRETE - HighPerformance, Non-Shrink Cement Grout

MSDS INFORMATION

CHOCK-CRETE

baseplates, structural steel and precast columns, dowels, etc. which require non shrink,high tolerance, high strength performance. It is flowable for easy placement, adhereswell to concrete or steel, and exhibits good impact and vibration characteristics.

Back to the top

PRODUCT APPLICATION AND INSTALLATION GUIDES FORENGINEERED CHOCKFAST GROUTING & CHOCKING COMPOUNDS

TECHNICAL BULLETINS

Bulletin # 615B- GROUTING LARGE ANCHOR BOLTS

Bulletin # 639- MAINTENANCE OF ALIGNMENT FROM CHOCKFAST RESIN CHOCKS

Bulletin # 642- CHOCKFAST INSTALLATION PROCEDURE - Industrial Applications

Bulletin # 643- STANDARDIZED CHOCKFAST DESIGN FOR INTEGRAL GAS ENGINE COMPRESSORS

Bulletin # 660- COMMON HOLD DOWN BOLT ARRANGEMENTS

Bulletin # 661E- RESIN INJECTION INTO CRACKS IN CONCRETE

Bulletin # 662C- CHOCKFAST EXPANSION JOINT

Bulletin # 663A- PHYSICAL SPECIFICATIONS FOR EPOXY GROUTS

Bulletin # 667- EFFECT OF CHOCK DESIGN ON FOUNDATION OPERATING TEMPERATURE

Bulletin # 675- CHEMICAL RESISTANCE CHART

Bulletin # 691- CALCULATED ANCHOR BOLT PULL

Bulletin # 814- ITW PHILADELPHIA RESINS RELEASE AGENT

Bulletin # 1016- COMPARISON OF PHYSICAL CHARACTERISTICS - Grouting Compounds

Versin espaola- Boletn #639

Auxiliary Products

Auxiliary Products by ITW Philadelphia Resins are a system of epoxy products used for the general

maintenance and repair of industrial and commercial applications.

Auxiliary Products have a wide array of uses are often used in conjunction with other ITW Philadelphia ResinsProducts for repairs to concrete floors and machinery foundations. They are easy to prepare and provide quick,permanent solutions to your maintenance and repair problems.

TECHNICAL BULLETINS

Bulletin #1018Elastomeric Expansion Joint Compounds

Bulletin # 1015Fairing Compounds

Bulletin #1014Concrete Adhesive

Bulletin #1019/ Bulletin #1020Trowelable Floor Resurfacers(standard and acid resistant versions)

Bulletin #1021DRust Inhibitive Primers

Epoxy Floor Resurfacers


6/12

Impax 5020 Floor Resurfacer andImpax 5020AR Acid-Resistant Floor ResurfacerImpax 5020 is a three component, trowelable epoxysurfacing and leveling compound for new or oldconcrete floors where a high degree of chemical andabrasion resistance is required. The physical

properties of Impax 5020 Floor Resurfacer are muchgreater than concrete. Excellent abrasion and impactresistance recommend it for high traffic areas. Its100% reactive epoxy formulation conforms to presentOSHA and USDA requirements, permittingapplications in any food processing facility. Thisseamless resurfacer provides a barrier to bacterialgrowth and is designed for use where a sanitary,

chemical resistant, anti-skid floor is required.

TECHNICAL BULLETINS

Bulletin # 1019- IMPAX 5020 TROWELABLE FLOORRESURFACER

Bulletin # 1020- IMPAX 5020AR ACID-RESISTANT FLOORRESURFACER

Bulletin # 679D- IMPAX 5020AR CHEMICAL RESISTANCE CHART

MSDS INFORMATION

IMPAX 5020FLOOR RESURFACER CEMENT AGGREGATE

IMPAX 5020FLOOR RESURFACER DECK GRAY AGGREGATE

IMPAX 5020RESIN AND HARDENER

IMPAX 5020FLOOR RESURFACER HAZE GRAY AGGREGATE

IMPAX 5020FLOOR RESURFACER TILE RED AGGREGATE

IMPAX 5020ARACID RESISTANT FLOOR RESURFACER RESINAND HARDENER

Impax 5020 Floor Resurfacer is also available in an

acid-resistance version.

For detailed information, see Philadelphia ResinsBulletin #1019 and #1020

Back to the top

Adhesives and Repair Compounds

Super Repair Products manufactured by ITWPhiladelphia Resins provide tough, long-lastingspecialty repairs for a wide array of industrial andcommercial applications in aviation, chemicalprocessing, mining, pulp & paper, refining and allother industries. Super Repair Products are

engineered to:

Rebuild worn or damaged metal surfaces

Extend the life of new or reconditioned

equipment

Resist abrasion, impact, cavitations, corrosion,

erosion and chemical attack

Super Repair Products are easy to use with

convenient application to vertical, curved or overheadsurfaces. No heat, pressure or special tools areneeded to create an integral bond between these


7/12

materials and the applied surfaces.

Back to the top

TECHNICAL BULLETINS

Bulletin # 672A- ITW PHILADELPHIA RESINS EXPANSION JOINT COMPOUND ESTIMATING CHART

Bulletin # 819- SUPER CERAMIC REPAIR LIQUID - Ceramic Abrasion & Erosion Resistant Coating

Bulletin # 820- SUPER ALLOY TITANIUM REPAIR COMPOUND - Machinable, Titanium Repair Putty

Bulletin # 821- SUPER CERAMIC REPAIR PUTTY - Ceramic Abrasion & Erosion Resistant Putty

Bulletin # 822A- Comparison of Physical Properties between SUPER ALLOY and Competitive Material

Bulletin # 913- WEAREX ARC - Abrasion Resistant Compound

Bulletin #965- PHILLYBOND # 6 - High Temperature Epoxy Putty

Bulletin # 1014- ITW PRC CONCRETE ADHESIVE *(Formerly Phillybond 1775/620TS)

Bulletin # 1015- ITW PRC REPAIR COMPOUND *(Formerly Phillybond Blue 6A)

Bulletin # 1018- ITW PRC EXPANSION JOINT COMPOUND *(Formerly Phillybond 7C)

MSDS INFORMATION

WEAREX ARC

PHILLYBOND #6

EXPANSION JOINT COMPOUND* (Formerly Phillybond 7C) COLOR BLUE DISCONTINUED

CONCRETE ADHESIVE, 1 GAL UNIT* (Formerly Phillybond 1775/620TS)

REPAIR COMPOUND, * (Formerly Phillybond Blue 6A)

SUPER CERAMIC REPAIR PUTTY

SUPER ALLOY TITANIUM REPAIR PUTTY

Primers & Solvents


8/12

Primers & Solvents are a system of preparation products used in association with the following ITW

Philadelphia Resins products:

Engineered Grouting & Chocking Compounds ITW Philadelphia Resins Auxiliary Products

Adhesives and Repair Compounds Specialty Coatings Secondary Containment and Chemical Resistance Coatings

Our primers are two-component, high solids, zero VOC coatings that may be used alone to protect or sealmaterials like concrete, steel, wood and masonry or as an undercoating to enhance adhesion of top coatingsand resurfacers.

Our solvents enhance bonding of epoxies applied to any surface by removing petroleum - based materials andother foreign products. They may be used for clean up of tools and equipment or to thin some coating products.

Back to the top

TECHNICAL BULLETINS

Bulletin # 812- IMPAX 33 PRIMER - 100% Solids Epoxy Primer

Bulletin # 848- IMPAX WATER-BASED EPOXY PRIMER GRAY

Bulletin # 849C- IMPAX WATER-BASED EPOXY PRIMER CLEAR

Bulletin # 859A- IMPAX IXT-59 SOLVENT

Bulletin # 1021- ITW PRC RUST INHIBITIVE PRIMER HS

MSDS INFORMATION

IMPAX 33 PRIMER

RUST INHIBITIVE PRIMER HS

IMPAX WATER BASED GRAY PRIMER

IMPAX WATER BASED CLEAR PRIMER

IMPAX IXT-59 SOLVENT

Floor Systems & Speciality Coatings

Floor Systems & Specialty Coatings manufactured

by ITW Philadelphia Resins provide tough, long-lasting solutions to new and existing floors subject toheavy traffic use, chemical attack and severe

environmental conditions.

Exceptional abrasion, corrosion and impact resistanceprovide considerable versatility with a wide array ofindustrial and commercial applications inwater/wastewater treatment plants, petroleumfacilities, pulp & paper mills, mining operations,chemical plants, hospitals, manufacturing areas andothers.

Heavy Duty Non-Skid Coatings


9/12

IMPAX 2001 High-Solids Epoxy CoatingPhillyclad 2001 is a heavy-duty, interior/exterior, two component, catalyzed epoxy coating formulated fordemanding industrial applications. Cures rapidly to a tough, semi-gloss finish with excellent resistance to alkali,abrasion, corrosion and chemical attack. It meets USDA standards for maintenance protective coatings not indirect contact with food in federally inspected meat and poultry plants.

For more detailed information, see Philadelphia Resins Technical Bulletin # 1022

TECHNICAL BULLETINS

Bulletin # 1022- IMPAX 2001- High Solids General Purpose Epoxy Coating

MSDS INFORMATION

IMPAX 2001 - Deck Gray, Haze Gray, Red, Safety Yellow, Sandstone

IMPAX 200 Urethane Nonskid CoatingIMPAX 200 is a two component, moisture curednonskid urethane coating available in one grit size andsix colors. It is a tough, long wearing, protectivecoating that provides safe footing and excellenttraction for personnel and equipment. IMPAX 200can be applied at low temperatures (400F/40C), curesquickly and provides a flexible, UV resistant film.Recommended industrial uses include work areas,ramps, loading docks, walkways, industrial flooring,machinery spaces, tank roofs, steps, etc.For detailed information, request Philadelphia Resins'Bulletin #969.

TECHNICAL BULLETINS

Bulletin # 969H- IMPAX 200 NON SKID - Urethane, Heavy Duty Non-Skid Coating

MSDS INFORMATION

IMPAX 200 - GRAY, BLACK, GREEN, RED

IMPAX 300 Epoxy Nonskid CoatingIMPAX 300 is a catalyzed epoxy nonskid coating

that exhibits superior chemical resistance to acids,alkali's, solvents, fuels, etc. It is available in one gritsize and six colors and is recommended forenvironments where a tough, chemically resistant,heavy duty nonskid is required. Applications includewaste treatment plants, petroleum facilities, pulp andpaper mills, mining facilities, chemical plants, etc.For detailed information, see Philadelphia Resins'Bulletin #968.

Core Roller Application

TECHNICAL BULLETINS

Bulletin # 968G- IMPAX 300 NON SKID - Epoxy Heavy Duty Non-Skid Coating


10/12

Bulletin # 677A- IMPAX 300 NON SKID CHEMICAL RESISTANCE CHART

MSDS INFORMATION

IMPAX 300

Self-Leveling Epoxies

State-of-the-art application methods using notchedsqueegee and spike roller.

IMPAX 650 RC/SL100% Solids Self Leveling EpoxyIMPAX 650RC/SL is a 100% solids, two component,self-leveling epoxy floor coating. This highperformance floor system provides a high gloss,seamless, hygienic surface that is extremely hardwearing and durable. It is available in five colors andmeets OSHA and State VOC regulations. It alsomeets USDA standards for maintenance protectivecoatings not in direct contact with food in federallyinspected meat and poultry plants. The coating can

also be applied to provide a non-slip texture.For detailed information, request Philadelphia Resins'

Bulletin #1009

Back to the top

TECHNICAL BULLETINS

Bulletin # 1009- IMPAX 65ORC - 100% Solids, Self-Leveling EpoxyCoating

MSDS INFORMATION

IMPAX 65ORC - Deck Gray, Haze Gray, Red, Sandstone, White

30/50 Flint Shot

Secondary Containment Systems & Chemical Resistant Coatings

Secondary Containment and Chemical-Resistant Coatings manufactured by ITW Philadelphia Resins providedurable, long-lasting maintenance products for protection of industrial applications subject to chemical attack

and severe environmental conditions.

Well suited for secondary containment applications, these coatings afford superior resistance to petroleum

products, acids, salts alkalis, solvents and other substances. Their superior abrasion, corrosion and impactresistance provide considerable adaptability in a wide array of industrial applications.


11/12

Impax SCS Penetrating Epoxy Primer:

Impax SCS penetrating epoxy primer protects bare concrete, old or new, where a two component, penetratingsealer is recommended; especially in secondary containment systems. Its low viscosity and quick tack help to

ensure fast, efficient new installations, as well as very rapid turnarounds during downtimes.

For detailed information, see Philadelphia Resins Technical Bulletin # 1002B

TECHNICAL BULLETINS

Bulletin # 1002B- IMPAX SCS PENETRATING EPOXY PRIMER

MSDS INFORMATION

IMPAX SCSPENETRATING EPOXY PRIMER

IMPAX 6700 80% Solids, High - Build,Acid-Resistant Novolac Coating:

Phillyclad 6470 Heavy-Duty Coating:

IMPAX 6700 is a 80% solids, high-build,protective coating resists severe attackby chemicals, petrochemical, acids andalkalis. Protects concrete floors andwalls around storage tanks, pumps,process vessels and other equipmentfrom corrosive environments. Tough,durable and even impervious to spillsand splashes of concentrated 98%sulfuric acid. Low viscosity and

excellent adhesion characteristics insurea tight bond to clean sound concrete

surfaces.

For detailed information, see Philadelphia ResinsTechnical Bulletin # 1006

TECHNICAL BULLETINS

Bulletin # 1006- IMPAX 6700 - 80% Solids, High-Build Acid-Resistant Coating

MSDS INFORMATION

IMPAX 6700

Back tothe top

Phillyclad 6470 is a 100% solids, two component,high-build epoxy coating developed for severeenvironmental conditions. Phillyclad 6470 providesa tough, flexible coating with a dry film thickness of10-15 mils per coat. Excellent adhesivecharacteristics along with exceptional abrasion,erosion and impact resistance provides considerableversatility for a broad range of applications. Gooddielectric properties provide effective protectionagainst galvanic corrosion in applications involving

dissimilar metals.

For detailed information, see Philadelphia Resins Technical Bulletin #963

TECHNICAL BULLETINS

Bulletin # 963H-PHILLYCLAD 6470 - 100% Solids, High-Build,Heavy Duty Epoxy Coating

MSDS INFORMATION

PHILLYCLAD 6470

ITW Philadelphia Resins130 Commerce DriveMontgomeryville, PA 18936

Phone: 800-284-8450215-855-8450

Fax: 215-855-4688

ITW Philadelphia ResinsShannon Industrial EstateShannon Free Airport

County Clare, IrelandPhone: 353.61.471299Fax: 353.61.471285


12/12

Email:[email protected]

Back tothe top

Email: [email protected]

HOME| ABOUT PHILLY| REGIONAL OFFICES| DISTRIBUTORS| PRODUCT OVERVIEW

REFERENCE DATA| SEMINARS| NEWS & EVENTS| MARINE VISITORS

Copyright 2003 ITW Philadelphia Resins. All rights reserved.

ChockfastProduct Catalog

(available in print)

Downloadable Zipped single PDF file of completeChockfastProduct Catalog

MachineryGrout Manual

(available in print)

Downloadable Zipped single PDF file of complete

Machinery Grout Manual

Documents

Chockfast Product