Chapter 9. Molecular Geometry and Bonding Theoriestamapchemistryhart.weebly.com/uploads/3/8/0/0/38007377/chapter_9... · AP Chemistry Chapter 9. ... - 1 - Chapter 9. Molecular Geometry

AP Chemistry Chapter 9. Molecular Geometry and Bonding Theories

- 1 -

Chapter 9. Molecular Geometry and Bonding Theories

9.1 Molecular Shapes

Read Sec. 9.1 and 9.2, then complete the Sample and Practice Exercises in these sections.

Sample Exercise 9.1 (p. 350)

Use the VSEPR model to predict the molecular geometries of

a) O3

b) SnCl3

-

Practice Exercise 1 (9.1)

Consider the AB3 molecules and ions: PCl3, SO3, AlCl3, SO3

2-, and CH3+. How many of these molecules and

ions do you predict to have a trigonal-planar geometry?

a) 1 b) 2 c) 3 d) 4 e) 5


- 2 -


Predict the electron-domain geometry and the molecular geometry for

a) SeCl2

b) CO32-


- 3 -

The Effect of Nonbonding Electrons and Multiple Bonds on Bond Angles

• Consider three molecules with tetrahedral electron domain geometries: • CH4, NH3, and H2O. • By experiment, the H–X–H bond angle decreases from C (109.5o in CH4) to N (107 o in NH3) to O

(104.5 o in H2O).

• Since electrons in a bond are attracted by two nuclei, they do not repel as much as lone pairsTherefore, the bond angle decreases as the number of lone pairs increases.

• A bonding pair of electrons is attracted by two nuclei. They do not repel as much as lone pairs which are primarily attracted by only one nucleus.

• Electron domains for nonbonding electron pairs thus exert greater repulsive forces on adjacent electron domains.

• They tend to compress the bond angles. • The bond angle decreases as the number of nonbonding pairs increases. • Similarly, electrons in multiple bonds repel more than electrons in single bonds. (e.g. in Cl2CO the O–

C–Cl angle is 124.3 o, and the Cl–C–Cl bond angle is 111.4 o).

C OCl

Cl111.4o

124.3o


- 4 -

• 11 basic molecular shapes: • Three atoms (AB2) • Linear • Bent • Four atoms (AB3): • Trigonal planar • Trigonal pyramidal • T-shaped • Five atoms (AB4): • Tetrahedral • Square planar • See-saw • Six atoms (AB5): • Trigonal bipyramidal • Square pyramidal • Seven atoms (AB6): • Octahedral

Molecules with Expanded Valence Shells

• AB5 (trigonal bipyramidal) or AB6 (octahedral) electron domain geometries. • Trigonal bipyramidal structures have a plane containing three electron pairs. • The fourth and fifth electron pairs are located above and below this plane. • In this structure two trigonal pyramids share a base. • For octahedral structures, there is a plane containing four electron pairs. • Similarly, the fifth and sixth electron pairs are located above and below this plane. • Two square pyramids share a base. • Consider a trigonal bipyramid: • The three electron pairs in the plane are called equatorial; • The two electron pairs above and below this plane are called axial; • The axial electron pairs are 180 o apart and 90 o to the equatorial electrons; • The equatorial electron pairs are 120 o apart; • To minimize electron–electron repulsion, nonbonding pairs are always placed in equatorial positions

and bonding pairs in either axial or equatorial positions.


- 5 -


- 6 -

Sample Exercise 9.2 (p. 354) Use the VSEPR model to predict the molecular geometry of

a) SF4

b) IF5


A certain AB4 molecule has a square-planar molecular geometry. Which of the following statements about the molecule is or are true?

(i) The molecule has four electron domains about the central atom (ii) The B-A-B angles between neighboring B atoms is 90o. (iii) The molecule has two nonbonding pairs of electrons on atom A.

a) Only one of the statements is true. b) Statements (i) and (ii) are true. c) Statements (i) and (iii) are true. d) Statements (ii) and (iii) are true. e) All three statements are true.


Predict the electron-domain geometry and molecular geometry of

a) BrF5+

b) SF5+

Shapes of Larger Molecules • In acetic acid, CH3COOH, there are three interior atoms: two C and one O. • We assign the molecular (and electron-domain) geometry about each interior atom separately: • The geometry around the first C is tetrahedral; • The geometry around the second C is trigonal planar; and • The geometry around the O is bent (tetrahedral).


- 7 -

Sample Exercise 9.3 (p. 355) Eyedrops for dry eyes usually contain a water-soluble polymer called polyvinylalcohol, which is based on the unstable organic molecule called vinyl alcohol. Predict the approximate values for the H-O-C and O-C-C bond angles in vinyl alcohol.


The atoms of the compound methylhydrazine, CH6N2, which is used as a rocket propellant, are connected as follows (note that lone pairs are not shown): See p. 356 in your textbook. What do you predict for the ideal values of the C-N-N and H-N-H angles, respectively?

a) 109.5o and 109.5o b) 109.5o and 120o c) 120o and 109.5o d) 120o and 120o e) None of the above


Predict the H—C—H and C—C—C bond angles in the molecule shown, called propyne.


- 8 -

9.3 Molecular Shape and Molecular Polarity • If two charges, equal in magnitude and opposite in sign, are separated by a distance d, then a dipole is

established. • The dipole moment, µ, is given by

µ = Qr • where Q is the magnitude of the charge. • We can extend this to polyatomic molecules. • For each bond in a polyatomic molecule, we can consider the bond dipole. • The dipole moment due only to the two atoms in the bond is the bond dipole. • Because bond dipoles and dipole moments are vector quantities, the orientation of these individual

dipole moments determines whether the molecule has an overall dipole moment. • Examples: • In CO2 each δ+C−Oδ- dipole is canceled because the molecule is linear.

• In H2O, the δ+H−Oδ- dipoles do not cancel because the molecule is bent.

• Molecules with polar bonds can be either polar or nonpolar, depending on the molecular geometry.

Molecules containing polar bonds.

Two of these molecules have a zero dipole moment because their bond dipoles cancel one another, while the other molecules are polar.


- 9 -


Predict whether the following molecules are polar or nonpolar:

a) BrCl

b) SO2

c) SF6


Consider an AB3 molecule in which A and B differ in electronegativity. You are told that the molecule has an overall dipole moment of zero. Which of the following could be the molecular geometry of the molecule?

a) Trigonal pyramidal b) Trigonal planar c) T-shaped d) Tetrahedral e) More than one of the above


Determine whether the following molecules are polar or nonpolar:

a) SF4

b) SiCl4


- 10 -

9.4 Covalent Bonding and Orbital Overlap

• valence-bond theory: • A covalent bond forms when the orbitals on two atoms overlap. • The shared region of space between the orbitals is called the orbital overlap. • There are two electrons (usually one from each atom) of opposite spin in the orbital overlap.

• As two nuclei approach each other their atomic orbitals overlap. • As the amount of overlap increases, the energy of the interaction decreases. • At some distance the minimum energy is reached. • The minimum energy corresponds to the bonding distance (or bond length). • As the two atoms get closer, their nuclei begin to repel and the energy increases. • At the bonding distance, the attractive forces between nuclei and electrons just balance the repulsive

forces (nucleus-nucleus, electron-electron).


- 11 -

9.5 Hybrid Orbitals

• We can apply the idea of orbital overlap and valence-bond theory to polyatomic molecules.

sp Hybrid Orbitals

• Consider the BeF2 molecule: • Be has a 1s22s2 electron configuration. • There is no unpaired electron available for bonding. • We conclude that the atomic orbitals are not adequate to describe orbitals in molecules. • We know that the F–Be–F bond angle is 180 o (VSEPR theory). • We also know that one electron from Be is shared with each one of the unpaired electrons from F. • We assume that the Be orbitals in the Be–F bond are 180 o apart. • We could promote an electron from the 2s orbital on Be to the 2p orbital to get two unpaired electrons for

bonding. • BUT the geometry is still not explained. • We can solve the problem by allowing the 2s and one 2p orbital on Be to mix or form two new hybrid

orbitals (a process called hybridization). • The two equivalent hybrid orbitals that result from mixing an s and a p orbital and are called sp hybrid

orbitals. • The two lobes of an sp hybrid orbital are 180 o apart.

• According to the valence-bond model, a linear arrangement of electron domains implies sp hybridization. • Since only one of 2p orbitals of Be has been used in hybridization, there are two unhybridized p orbitals

remaining on Be. • The electrons in the sp hybrid orbitals form shared electron bonds with the two fluorine atoms.


- 12 -

Formation of two equivalent Be—F bonds in BeF2.

Each sp hybrid orbital on Be overlaps with a 2p orbital on F to form a bond. The two bonds are equivalent to each other and form an angle of 180°.

sp2 and sp3 Hybrid Orbitals

• Important: When we mix n atomic orbitals we must get n hybrid orbitals. • Three sp2 hybrid orbitals are formed from hybridization of one s and two p orbitals. • Thus, there is one unhybridized p orbital remaining. • The large lobes of the sp2 hybrids lie in a trigonal plane. • Molecules with trigonal planar electron-pair geometries have sp2 orbitals on the central atom.


- 13 -

• Four sp3 hybrid orbitals are formed from hybridization of one s and three p orbitals. • Therefore, there are four large lobes. • Each lobe points towards the vertex of a tetrahedron. • The angle between the large lobes is 109.5 o • Molecules with tetrahedral electron pair geometries are sp3 hybridized.

Valence-bond description of H2O.

The bonding in a water molecule can be envisioned as sp3 hybridization of the orbitals on O. Two of the four hybrid orbitals overlap with 1s orbitals of H to form covalent bonds. The other two hybrid orbitals are occupied by nonbonding pairs of

electrons.


- 14 -

Hybridization Involving d Orbitals

• Current evidence suggests that hybridization involving d orbitals does not exist.

Hybrid Orbital Summary

• To assign hybridization: • Draw a Lewis structure. • Assign the electron-domain geometry using VSEPR theory. • Specify the hybridization required to accommodate the electron pairs based on their geometric

arrangement. • Name the geometry by the positions of the atoms.

Bonding in NH3. The hybrid orbitals used by N in the NH3 molecule are predicted by first drawing the Lewis

structure, then using the VSEPR model to determine the electron-domain geometry, and then specifying the hybrid orbitals that correspond to that geometry. This is essentially the same procedure as that used to determine molecular structure

(Figure 9.6), except we focus on the orbitals used to make bonds and to hold nonbonding pairs.


Describe the orbital hybridization around the central atom in NH2-.


For which of the following molecules or ions does the following description apply? “The bonding can be explained using a set of sp2 hybrid orbitals on the central atom, with one of the hybrid orbitals holding a nonbonding pair of electrons.”

a) CO2 b) H2S c) O3 d) CO32- e) more than one of the above


Predict the electron-domain geometry and the hybridization of the central atom in SO32-.


- 15 -

Ignore hybridizations that include d orbitals as current evidence suggests they do not exist.


- 16 -

9.6 Multiple Bonds • Sigma (σ) bonds: electron density lies on the axis between the nuclei. • All single bonds are σ bonds. • What about overlap in multiple bonds? • Pi (π) bonds: electron density lies above and below the plane of the nuclei. • A double bond consists of one σ bond and one π bond. • A triple bond has one σ bond and two π bonds. • Often, the p orbitals involved in π bonding come from unhybridized orbitals.

Multiple bonds. In almost all cases, single bonds are σ bonds. A double bond consists of one σ bond and one π bond, and a triple bond consists of one σ bond and two π bonds. • For example: ethylene, C2H4, has: • One σ and one π bond. • Both C atoms sp2 hybridized. • Both C atoms with trigonal planar electron-pair and molecular geometries.


- 17 -

• For example: acetylene, C2H2: • The electron-domain geometry of each C is linear. • Therefore, the C atoms are sp hybridized. • The sp hybrid orbitals form the C–C and C–H σ bonds. • There are two unhybridized p orbitals on each C atom. • Both unhybridized p orbitals form the two π bonds; • One π bond is above and below the plane of the nuclei; • One π bond is in front and behind the plane of the nuclei. • When triple bonds form (e.g., N2), one π bond is always above and below and the other is in front and

behind the plane of the nuclei.

Formation of σ and π bonds in formaldehyde, H2CO.


- 18 -

Sample Exercise 9.6 (p. 368) Formaldehyde has the Lewis structure

Describe how the bonds in formaldehyde are formed in terms of overlaps of hybridized and unhybridized orbitals.


We have just arrived at a bonding description for the formaldehyde molecule. Which of the following statements about the molecule is or are true?

(i) Two of the electrons in the molecule are used to make the π bond in the molecule. (ii) Six of the electrons in the molecule are used to make the σ bonds in the molecule. (iii) The C-O bond length in formaldehyde should be shorter than that in methanol, H3COH.

a) Only one of the statements is true. b) Statements (i) and (ii) are true. c) Statements (i) and (iii) are true. d) Statements (ii) and (iii) are true. e) All three statements are true.


Consider the acetonitrile molecule:

a) Predict the bond angles around each carbon atom b) Describe the hybridization at each of the carbon atoms c) Determine the total number σ and π bonds in the molecule.


- 19 -

Resonance Structures, Delocalization and π Bonding

• So far all the bonds we have encountered are localized between two nuclei. • In the case of benzene: • There are six C–C σ bonds and six C–H σ bonds • Each C atom is sp2 hybridized. • There is one unhybridized p orbital on each carbon atom, resulting in six unhybridized carbon p orbitals

in a ring.

• In benzene there are two options for the three π bonds: • Localized between carbon atoms or • Delocalized over the entire ring (i.e., the π electrons are shared by all six carbon atoms). • Experimentally, all C–C bonds are the same length in benzene. • Therefore, all C–C bonds are of the same type (recall single bonds are longer than double bonds).

Sample Exercise 9.7 (p. 371) Describe the localized π bonding in the nitrate ion, NO3

-.


How many electrons are in the π system of the ozone molecule, O3?

a) 2 b) 4 c) 6 d) 14 e) 18


Which of the following molecules or ions will exhibit delocalized bonding? SO2, SO3, SO3

2-, H2CO, NH4+?


- 20 -

General Conclusions • Every pair of bonded atoms shares one or more pairs of electrons. • Two electrons shared between atoms on the same axis as the nuclei are σ bonds. • σ Bonds are always localized in the region between two bonded atoms. • If two atoms share more than one pair of electrons, the additional pairs form π bonds. • When resonance structures are possible, delocalization is also possible.

Sample Integrative Exercise (p. 386)

Elemental sulfur is a yellow solid that consists of S8 molecules. The structure of the S8 molecule is a puckered, eight-membered ring.

Heating elemental sulfur to high temperatures produces gaseous S2 molecules.:

S8(s) 4 S2(g)

a) The electronic configuration of which period 2 element is most similar to sulfur? b) Use the VSEPR model to predict the S-S-S bond angles in S8 and the hybridization at S in S8. d) Use bond enthalpies (Table 8.4) to estimate the enthalpy change for the reaction just described. Is the reaction exothermic or endothermic?

Documents

Chapter 9. Molecular Geometry and Bonding Theoriestamapchemistryhart.weebly.com/uploads/3/8/0/0/38007377/chapter_9... · AP Chemistry Chapter 9. ... - 1 - Chapter 9. Molecular Geometry