Chapter 76

CHAPTER 76

ALUMINUM AND ARTICLES THEREOFXV

76-1Note

1. In this chapter the following expressions have the meanings hereby assigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross section along their whole length inthe shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattenedcircles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equallength and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have cornersrounded along their whole length.The thickness of such products which have a rectangular (including "modified rectangular")cross section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms anddimensions, which have been subsequently worked after production (otherwise than by simple trimming or descaling), providedthat they have not thereby assumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross section along their whole length, whichdo not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression alsocovers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise thanby simple trimming or descaling), provided that they have not thereby assumed the character of articles or products of otherheadings.

(c) Wire

Rolled, extruded or drawn products, in coils, which have a uniform solid cross section along their whole length in the shapeof circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles"and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal lengthand parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners roundedalong their whole length. The thickness of such products which have a rectangular (including "modified rectangular") crosssection exceeds one-tenth of the width.

(d) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 7601), coiled or not, of solid rectangular (other thansquare) cross section with or without rounded corners (including "modified rectangles" of which two opposite sides are convexarcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

- of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,

- of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles orproducts of other headings.

Headings 7606 and 7607 apply, inter alia , to plates, sheets, strip and foil with patterns (for example, grooves, ribs, checkers,tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided thatthey do not thereby assume the character of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross section with only one enclosed void along their whole length inthe shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which havea uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonalcross section, which may have corners rounded along their whole length, are also to be considered as tubes and pipesprovided the inner and outer cross sections are concentric and have the same form and orientation. Tubes and pipes of theforegoing cross sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted withflanges, collars or rings.

Subheading Notes

1. In this chapter the following expressions have the meanings hereby assigned to them:

Harmonized Tariff Schedule of the United States (2015)(Rev.2)Annotated for Statistical Reporting Purposes

Subheading Notes (con.)

(a) Aluminum, not alloyed

Metal containing by weight at least 99 percent of aluminum, provided that the content by weight of any other element doesnot exceed the limit specified in the following table:

TABLE - Other elements

Limiting content percent byweight

Element

1Fe + Si (iron plus silicon)

0.1 (2)Other elements (1), each

(1) Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.

(2) Copper is permitted in a proportion greater than 0.1 percent but not more than0.2 percent, provided that neither the chromium nor manganese content exceeds0.05 percent.

(b) Aluminum alloys

Metallic substances in which aluminum predominates by weight over each of the other elements, provided that:

(i) The content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limitspecified in the foregoing table; or

(ii) The total content by weight of such other elements exceeds 1 percent.

2. Notwithstanding the provisions of chapter note 1(c), for the purposes of subheading 7616.91 the term "wire" applies only toproducts, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.

Additional U.S. Note

1. For the purposes of heading 7608, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubes andpipes with attached fittings, suitable for conducting gases or liquids.

Statistical Notes

l. For the purposes of this chapter, the term "aluminum vanadium master alloy" refers to aluminum alloys which contain by weight20 percent or more of vanadium.

2. For the purposes of this chapter, the term "aluminum can stock" refers to sheets and strip in coils, of alloys of aluminum in whicheither manganese or magnesium is the predominant alloying element, not painted, over 0.175 mm but not over 0.432 mm inthickness, and over 254 mm in width, comprising "body stock and "lid stock" as specified below:

(a) The term "body stock" refers to aluminum can stock having manganese as the predominant alloying element and having aminimum tensile strength of 262 MPa; and

(b) The term "lid stock" refers to aluminum can stock having magnesium as the predominant alloying element and having aminimum tensile strength of 345 MPa.


XV76-2

Rates of DutyUnitof

QuantityArticle Description

Stat.Suf-fix

Heading/Subheading 21

SpecialGeneral

Unwrought aluminum:7601Aluminum, not alloyed:7601.10

Of uniform cross section throughout its length, the leastcross-sectional dimension of which is not greater than9.5 mm, in coils................................................................

007601.10.30

18.5%Free (A*, AU, BH,CA, CL, CO, D, E,IL, JO, KR, MA,MX, OM, P, PA,PE, SG)

2.6%kg..............

Other.................................................................................007601.10.60 11%Freekg..............Aluminum alloys:7601.20

Of uniform cross section throughout its length, the leastcross-sectional dimension of which is not greater than9.5 mm, in coils................................................................

007601.20.30

18.5%Free (A, AU, BH,CA, CL, CO, D, E,IL, JO, KR, MA,MX, OM, P, PA,PE, SG)

2.6%kg..............

Other:Containing 25 percent or more by weight ofsilicon.........................................................................

007601.20.6025%Free (A+, AU, BH,

CA, CL, CO, D, E,IL, JO, KR, MA,MX, OM, P, PA,PE, SG)

2.1%kg..............

Other..........................................................................7601.20.90 10.5%Free..................Aluminum vanadium master alloy....................30 kgOther:

Of uniform circular cross sectionthroughout its length, not in coils...............

45kg

Other, containing 0.03 percent or more byweight of lead (secondary aluminum).......

60kg

Other:Remelt scrap ingot...............................75 kgOther......................................................90 kg

Aluminum waste and scrap.........................................................7602.00.00 FreeFree..................Used beverage container scrap...........................................30 kgOther........................................................................................90 kg

Aluminum powders and flakes:7603Powders of non-lamellar structure.......................................007603.10.00 45%Free (A, AU, BH,

CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

3% (KR)

5%kg..............

Powders of lamellar structure; flakes...................................007603.20.00 11%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

2.3% (KR)

3.9%kg..............

Rates of Duty1


XV76-3

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum bars, rods and profiles:7604Of aluminum, not alloyed:7604.10

Profiles..............................................................................007604.10.10 45%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

3% (KR)

5%kg..............

Bars and rods:Having a round cross section..................................7604.10.30 11%Free (A*, AU, BH,

CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

2.6%..................

With an outside diameter of less than 10mm.......................................................................

10kg

With an outside diameter of 10 mm or more....50 kgOther..........................................................................7604.10.50 13.5%Free (A, AU, BH,


1.8% (KR)

3%..................

With amaximumcross-sectional dimension ofless than 10 mm.................................................

30kg

With amaximumcross-sectional dimension of10 mm or more...................................................

60kg

Of aluminum alloys:Hollow profiles.................................................................007604.21.00 15.5%Free (A, AU, BH,


1.5%kg..............

Other:7604.29Other profiles............................................................007604.29.10 45%Free (A, AU, BH,


3% (KR)

5%kg..............

Bars and rods:Having a round cross section...........................7604.29.30 11%Free (A*, AU, BH,


0.5% (KR)

2.6%..................

With an outside diameter of less than10 mm...........................................................

10kg

With an outside diameter of 10 mm ormore..............................................................

50kg

Other...................................................................7604.29.50 13.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

0.6% (KR)

3%..................

With a maximum cross-sectionaldimension of less than 10 mm...................

30kg

With a maximum cross-sectionaldimension of 10 mm or more.....................

60kg

Rates of Duty1


XV76-4

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum wire:7605Of aluminum, not alloyed:

Of which the maximum cross-sectional dimensionexceeds 7 mm..................................................................

7605.11.0011%Free (A*, AU, BH,


2.6%..................

Of which themaximum cross-sectional dimensionexceeds 9.5 mm........................................................

30kg

Other..........................................................................90 kgOther.................................................................................007605.19.00 25%Free (A, AU, BH,


2.5% (KR)

4.2%kg..............

Of aluminum alloys:Of which the maximum cross-sectional dimensionexceeds 7 mm..................................................................

7605.21.0011%Free (A*, AU, BH,


2.6%..................

Of which themaximum cross-sectional dimensionexceeds 9.5 mm........................................................

30kg

Other..........................................................................90 kgOther.................................................................................007605.29.00 25%Free (A, AU, BH,


2.5% (KR)

4.2%kg..............

Rates of Duty1


XV76-5

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum plates, sheets and strip, of a thickness exceeding0.2 mm:

7606

Rectangular (including square):Of aluminum, not alloyed:7606.11

Not clad......................................................................7606.11.30 13.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3%..................

With a thickness of more than 6.3 mm............30 kgWith a thickness of 6.3 mm or less..................60 kg

Clad............................................................................007606.11.60 9.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

2.7%kg..............

Of aluminum alloys:7606.12Not clad......................................................................7606.12.30 13.5%Free (A*, AU, BH,


0.6% (KR)

3%..................

With a thickness of more than 6.3 mm............30 kgWith a thickness of 6.3 mm or less:

Aluminum can stock:Body stock............................................45 kgLid stock................................................55 kg

Other.............................................................90 kgClad............................................................................007606.12.60 30%Free (A, AU, BH,


3.9% (KR)

6.5%kg..............

Rates of Duty1


XV76-6

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum plates, sheets and strip, of a thickness exceeding0.2 mm (con.):

7606

Other:Of aluminum, not alloyed:7606.91

Not clad......................................................................7606.91.30 13.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3%..................

With a thickness of more than 6.3 mm:Circles and discs.........................................30 kgOther.............................................................60 kg

With a thickness of 6.3 mm or less:Circles and discs.........................................75 kgOther.............................................................90 kg

Clad............................................................................7606.91.60 9.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

2.7%..................



Of aluminum alloys:7606.92Not clad......................................................................7606.92.30 13.5%Free (A, AU, BH,


1.8% (KR)

3%..................



Clad............................................................................7606.92.60 30%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

3.9% (KR)

6.5%..................



Rates of Duty1


XV76-7

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum foil (whether or not printed, or backed with paper,paperboard, plastics or similar backing materials) of athickness (excluding any backing) not exceeding 0.2 mm:

7607

Not backed:Rolled but not further worked:7607.11

Of a thickness not exceeding 0.15 mm:Of a thickness not exceeding 0.01 mm...........007607.11.30 40%Free (A, AU, BH,


1.1% (KR)

5.8%kg..............

Of a thickness exceeding 0.01 mm.................007607.11.60 40%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

3.1% (KR)

5.3%kg..............

Other..........................................................................7607.11.90 13.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

1.8% (KR)

3%..................

Aluminum can stock:Body stock...................................................30 kgLid stock.......................................................60 kg

Other...................................................................90 kgOther:7607.19

Etched capacitor foil.................................................007607.19.10 40%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

3.1% (KR)

5.3%kg..............

Other:Cut to shape, of a thickness not exceeding0.15 mm..............................................................

007607.19.3045%Free (A, AU, BH,


3.4% (KR)

5.7%kg..............

Other...................................................................007607.19.60 13.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, MA, MX, OM,P, PA, PE, SG)

1.8% (KR)

3%kg..............

Backed:7607.20Covered or decorated with a character, design, fancyeffect or pattern...............................................................

007607.20.1022.5%Free (A, AU, BH,


2.2% (KR)

3.7%kg..............

Other.................................................................................007607.20.50 23%Freekg..............

Rates of Duty1


XV76-8

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum tubes and pipes:7608Of aluminum, not alloyed.......................................................7608.10.00 45%Free (A, AU, B, BH,

C 1/, CA, CL, CO,E, IL, JO, MA, MX,OM, P, PA, PE,SG)

3.4% (KR)

5.7%..................

Seamless..........................................................................30 kgOther.................................................................................90 kg

Of aluminum alloys.................................................................7608.20.00 45%Free (A, AU, B, BH,C 1/, CA, CL, CO,E, IL, JO, MA, MX,OM, P, PA, PE,SG)

3.4% (KR)

5.7%..................

Seamless..........................................................................30 kgOther.................................................................................90 kg

Aluminum tube or pipe fittings (for example, couplings, elbows,sleeves)..........................................................................................

007609.00.0045%Free (A, AU, B, BH,


3.4% (KR)

5.7%kg..............

Aluminum structures (excluding prefabricated buildings ofheading 9406) and parts of structures (for example, bridgesand bridge-sections, towers, lattice masts, roofs, roofingframeworks, doors and windows and their frames andthresholds for doors, balustrades, pillars and columns);aluminum plates, rods, profiles, tubes and the like, preparedfor use in structures:

7610

Doors, windows and their frames and thresholds fordoors........................................................................................

7610.10.0045%Free (A, AU, BH,


5.7%..................

Windows and their frames..............................................10 kgThresholds for doors.......................................................20 kgOther.................................................................................30 kg

Other........................................................................................7610.90.00 45%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

5.7%..................

Sheet-metal roofing, siding, flooring, and roof gutteringand drainage equipment.................................................

20kg

Architectural and ornamental work...............................40 kgOther:

Mobile homes............................................................60 kgOther..........................................................................80 kg

Aluminum reservoirs, tanks, vats and similar containers, forany material (other than compressed or liquefied gas), of acapacity exceeding 300 liters, whether or not lined or heatinsulated, but not fitted with mechanical or thermalequipment......................................................................................

7611.00.00

45%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

2.6%..................

Tanks.......................................................................................30 No.

1/ See additional U.S note 1 to this chapter.

Rates of Duty1


XV76-9

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum reservoirs, tanks, vats and similar containers, forany material (other than compressed or liquefied gas), of acapacity exceeding 300 liters, whether or not lined or heatinsulated, but not fitted with mechanical or thermal equipment(con.)

7611.00.00(con.)

Other........................................................................................90 No.

Rates of Duty1


XV76-10

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Aluminum casks, drums, cans, boxes and similar containers(including rigid or collapsible tubular containers), for anymaterial (other than compressed or liquefied gas), of a capacitynot exceeding 300 liters, whether or not lined or heat insulated,but not fitted with mechanical or thermal equipment:

7612

Collapsible tubular containers..............................................007612.10.00 45%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

2.4%No.............

Other:7612.90Of a capacity not exceeding 20 liters............................7612.90.10 45%Free (A, AU, BH,


5.7%..................

Cans of a capacity not exceeding 355 ml..............30 No.Cans of a capacity exceeding 355ml but less than3.8 liters.....................................................................

60No.

Other..........................................................................90 No.Other.................................................................................007612.90.50 25%FreeNo.............

Aluminum containers for compressed or liquefied gas............007613.00.00 25%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

5%No.............

Stranded wire, cables, plaited bands and the like, includingslings and similar articles, of aluminum, not electricallyinsulated:

7614

With steel core:7614.10Not fitted with fittings and not made up into articles.....007614.10.10 35%Free (A+, AU, BH,


4.9%kg..............

Fitted with fittings or made up into articles...................007614.10.50 35%Free (A*, AU, B, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

4.9%kg..............

Other:7614.90Not fitted with fittings and not made up into articles:

Electrical conductors................................................007614.90.20 35%Free (A*, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

4.9%kg..............

Other..........................................................................007614.90.40 35%Free (A+, AU, BH,CA, CL, CO, D, E,IL, JO, KR, MA,MX, OM, P, PA,PE, SG)

4.9%kg..............

Fitted with fittings or made up into articles...................007614.90.50 45%Free (A*, AU, B, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

5.7%kg..............

Rates of Duty1


XV76-11

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Table, kitchen or other household articles and parts thereof,of aluminum; pot scourers and scouring or polishing pads,gloves and the like, of aluminum; sanitary ware and partsthereof, of aluminum:

7615

Table, kitchen or other household articles and parts thereof;pot scourers and scouring or polishing pads, gloves andthe like:

7615.10

Pot scourers and scouring or polishing pads, glovesand the like.......................................................................

007615.10.1145.5%Free (A, AU, BH,


3.1%kg..............

Rates of Duty1


XV76-12

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Table, kitchen or other household articles and parts thereof,of aluminum; pot scourers and scouring or polishing pads,gloves and the like, of aluminum; sanitary ware and partsthereof, of aluminum: (con.)

7615 (con.)

Table, kitchen or other household articles and parts thereof;pot scourers and scouring or polishing pads, gloves andthe like: (con.)

7615.10(con.)

Other:Cooking and kitchen ware

Enameled or glazed or containing nonstickinterior finishes:

Cast..............................................................7615.10.20 45.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3.1%..................

Bakeware (cookware not suitable forstove top use).......................................

15No.kg

Other......................................................25 No.kg

Other.............................................................7615.10.30 45.5%Free (A*, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3.1%..................


15No.kg

Other......................................................25 No.kg

Not enameled or glazed and not containingnonstick interior finishes:

Cast..............................................................7615.10.50 45.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3.1%..................


20No.kg

Other......................................................40 No.kg

Other.............................................................7615.10.71 45.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3.1%..................

Cookware:Bakeware (cookware not suitablefor stove top use)...........................

35No.kg

Other...............................................55 No.kg

Other......................................................60 No.kg

Other..........................................................................007615.10.91 45.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3.1%kg..............

Rates of Duty1


XV76-13

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Table, kitchen or other household articles and parts thereof,of aluminum; pot scourers and scouring or polishing pads,gloves and the like, of aluminum; sanitary ware and partsthereof, of aluminum (con:)

Sanitary ware and parts thereof...........................................007615.20.00 45.5%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

3.8%kg..............

Other articles of aluminum:7616Nails, tacks, staples (other than those of heading 8305),screws, bolts, nuts, screw hooks, rivets, cotters, cotterpins, washers and similar articles:

7616.10

Nails, tacks and staples..................................................007616.10.10 45%Free (A, AU, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

5.7%kg..............

Rivets................................................................................007616.10.30 45%Free (A, AU, B, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

4.7%kg..............

Cotters and cotter pins...................................................007616.10.50 45%Free (A, AU, B, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

5.7%kg..............

Other:Having shanks, threads or holes over 6 mm indiameter.....................................................................

7616.10.7045%Free (A, AU, B, BH,


5.5%..................

Threaded fasteners...........................................30 kgOther...................................................................90 kg

Other..........................................................................7616.10.90 45%Free (A, AU, B, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

6%..................

Threaded fasteners...........................................30 kgOther...................................................................90 kg

Rates of Duty1


XV76-14

Rates of DutyUnitof


Stat.Suf-fix


SpecialGeneral

Other articles of aluminum: (con.)7616 (con.)Other:

Cloth, grill, netting and fencing, of aluminum wire.......007616.91.00 45%Free (A, AU, B, BH,CA, CL, CO, E, IL,JO, KR, MA, MX,OM, P, PA, PE,SG)

2.5%kg..............

Other:7616.99Luggage frames........................................................007616.99.10 45%Freekg..............Other..........................................................................7616.99.50 45%Free (A, AU, B, BH,


2.5%..................

Laminated goods consisting of 2 or moreflat-rolled sheets of aluminum held togetherwith an adhesive or having a core ofnon-metallic material.........................................

20

kgLadders...............................................................30 No.Venetian blinds and parts thereof....................40 XHangers and supports for pipes and tubes.....50 kgOther:

Castings.......................................................60 kgForgings.......................................................70 kgOther:

Articles of wire......................................75 kgOther......................................................90 kg

Rates of Duty1


XV76-15

Documents

Chapter 76