Upload
charles-warner
View
218
Download
1
Tags:
Embed Size (px)
Citation preview
Chapter 16Properties of Solutions
1
Solution Formation
Solutions are homogeneous mixtures that may be solid, liquid, or gaseous.
The compositions of the solvent and the solute determine whether a substance will dissolve.
Stirring (agitation), temperature, and the surface area of the dissolving particles determine how fast the substance will dissolve.
2
Stirring affects only the rate at which a solid solute dissolves. It does not influence the amount of solute that will dissolve.
An insoluble substance remains undissolved regardless of how vigorously or for how long the solvent/solute system is agitated.
3
Temperature & Solution Formation
At higher temperatures, the kinetic energy of the solvent molecules is greater than at lower temperatures so they move faster.
4
Particle Size & Solution Formation
The more surface of the solute that is exposed, the faster the rate of dissolving.
A spoonful of granulated sugar dissolves more quickly than a sugar cube because the smaller particles in granulated sugar expose a much greater surface area to the colliding solvent molecules.
5
SolubilitySolubility
SolubilitySolubility of a substance is the amount of solute that dissolves in a given quantity of a solvent at a specified temperature and pressure to produce a saturated solution.
Saturated solutionSaturated solution – contains the maximum amount of solute for a given quantity of solvent at a constant temperature and pressure.
6
Unsaturated solutionUnsaturated solution – a solution that contains less solute than a saturated solution at a given temperature and pressure.
If additional solute is added to an unsaturated solution, it will dissolve until the solution is saturated.
Some liquids are infinitely soluble in each other. Any amount will dissolve in a given volume.
Two liquids are misciblemiscible if they dissolve in each other in all proportions (water and ethanol)
7
Factors Affecting SolubilityFactors Affecting SolubilityTemperature affects the solubility of a solid, liquid and gaseous solutes in a solvent.
Both temperature and pressure affect the solubility of gaseous solutes.
The solubility of most solid substances increases as the temperature of the solvent increases.
Supersaturated solutionSupersaturated solution – contains more solute than it can theoretically hold at a given temperature.
8
Pressure and SolubilityPressure and SolubilityChanges in pressure have little affect on the solubility of solids and liquids, but pressure strongly influences the solubility of gases.
Carbonated beverages contain large amounts of carbon dioxide dissolved in water. Dissolved CO2 makes the drink fizz.
The drinks are bottle under higher pressure of CO2 gas, which forces large amounts of the gas into solution.
When opened, the partial pressure of CO2 above the liquid decreases. 9
Pressure and SolubilityPressure and SolubilityImmediately, bubbles of CO2 form in the liquid and escape from the bottle and the concentration of dissolved CO2 decrease.
If the drink is left open, it becomes “flat” as it loses its CO2.
Henry’s LawHenry’s Law – stated that at a given temperature, the solubility (S) of a gas in a liquid is directly proportional to the pressure (P) of the gas above the liquid.
As the pressure of the gas above the liquid increases, the solubility of the gas increases. 10
Pressure and SolubilityPressure and Solubility
Henry’s Law
S1 = S2
P1 P2
11
QuestionThe solubility of a gas in water is 0.16 g/L at 104 kPa. What is the solubility when the pressure of the gas is increased to 288 kPa. Assume the temperature remains constant.
S1 = S2
P1 P2
(288 kPa) ( 0.16g/L) = 0.44 g/L
(104 kPa)
12
End of Section 16.113
ConcentrationConcentration
ConcentrationConcentration of a solution is a measure of the amount of solute that is dissolved in a given quantity of solvent.
Dilute solutionDilute solution is one that contains a small amount of solute.
Concentrated solutionConcentrated solution – contains a large amount of solute.
In chemistry the most important unit of concentration is molarity.
14
MolarityMolarity
MolarityMolarity (M) is the number of moles of solute dissolved in one liter of solution
Note that the volume involved is the total volume of the resulting solution, not the volume of the solvent alone.
3 M NaCl is read as “three molar sodium chloride”
(L)solution of Volume
solute of moles of no.Molarity
15
Molarity Questions
A solution has a volume of 2.0 L and contains 36.0 g of glucose (C6H12O6). If the molar mass of glucose is 180 g/mol, what is the molarity of the solution?
M = moles of solute
volume of solution
No. of moles = mass = 36 = 0.2 mol molar mass 180
M = 0.2 2
M = 0.1 mol/L or 0.1M C6H12O6
16
Molarity Questions
A solution has a volume of 250 mL and contains 0.70 mol NaCl. What is its molarity?
M = moles of solute
volume of solution
M = 0.70 mol NaCl 0.250L solution (convert to L)
M = 2.8 mol/L or 2.8M NaCl
17
MolarityMolarity
Sometimes you may need to determine the number of moles of solute dissolved in a given volume of solution.
How many moles are in 2.00 L of 2.5M lithium chloride (LiCl)?
Moles of solute = molarity (M) x liters of solution (V)Moles of solute = (2.5 moles/L) ( 2.00L)
Moles of solute = 5.0 mol
18
Molarity QuestionsHow many moles of ammonium nitrate are in 335 mL of 0.425 M NH4NO3?
mol NH4NO3 = M x L of solution
= (0.425 mol/L) (0.335L)
= 0.142 mol NH4NO3
How many moles of solute are in 250 mL of 2.0M CaCl2? How many grams of CaCl2 is that?
mol CaCl2 = (2.0 mole/L) (0.250 L) = 0.5 mol
0.50 mol CaCl2 X 111.11 g CaCl2 = 56 g19
Making DilutionsDilutingDiluting - To make less concentrated by adding solvent.
Diluting a solution reduces the number of moles of solute per unit volume, but the total number of moles of solute in solution does not change.
Moles of solute before dilution = moles of solute after dilution
moles of solute = M x L of solution and total number of moles of solute remains unchanged upon dilution.
M1V1 = M2V220
Making Dilutions
M1V1 = M2V2
molarity & volume molarity and volume of original solution of diluted solution
Volumes can be L or mL as long as the same units are used for both V1 and V2
21
Making Dilutions
A student is preparing a 100 mL of 0.40M MgSO4 from a stock solution of 2.0 M MgSO4. How would she do this?
M2V2
M1
V2 = 20 ml – She would measure 20 mL of the stock solution (2.0 M MgSO4) and transfer it to a volumetric flask.
Then she would add water to the flask to make 100 mL of solution.
Try the class activity on page 482
=V1
22
QuestionsQuestions
How many milliliters of a solution of 4.0 M KI are needed to prepare a 250.0 mL of 0.760 M KI?
V1 (0.760M)(250.0 mL) (47.5 mL) (4.0 M)
How could you prepare 250 mL of 0.20M NaCl using on a solution of 1.0M NaCl and water?
V1 = (0.20 M) ( 250 mL) = 50 mL( 1.0 M)
Use a pipet to transfer 50 mL of the 1.0M solution to a 250 mL flask. Then add distilled water up to the mark.
==
23
End of Section 16.224