1
This qualityaustria certificate confirms the application and further development of an effective The validity of the qualityaustria certificate will be maintained by annual surveillance audits and one renewal audit after three years. Konrad Scheiber General Manager Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH, AT-1010 Vienna, Zelinkagasse 10/3 Vienna, 28 September 2020 Date of initial issue: 01 November 2008 Valid until: 30 October 2023 Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH awards this qualityaustria certificate to the following organisation: Registration No.: 07389/1 The current validity of the certificate is documented exclusively on the Internet under http://www.qualityaustria.com/en/cert EAC: 19 b4862c43-eb6e-49fd- 80ab-4bec1ae14783 CERTIFICATE Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH is accredited according to the Austrian Accreditation Act by the BMWFW (Federal Ministry of Science, Research and Economy). Quality Austria is accredited as an organisation for environmental verification by the BMLFUW (Federal Ministry of Agriculture, Forestry, Environment and Water Management). Quality Austria is authorized by the VDA (Association of the Automotive Industry). For accreditation registration details please refer to the applicable decisions or recognition documents. Quality Austria is the Austrian member of IQNet (International Certification Network). Dr. Mag. Anni Koubek Specialist representative ANDRITZ HYDRO Group Headquarter: A-1120 Vienna, Eibesbrunnergasse 20 Research, development, testing, sales, engineering, procurement, manufacturing, installation, commissioning, and project management of - Turn-key hydro power plants - Service, refurbishment, maintenance, optimization, and operation of plants - Turbines, Generators, Penstock, Gates - Automation, Electrical Power Systems - Pumps, Motors and Pumping Solutions - Turbo Generators QUALITY MANAGEMENT SYSTEM complying with the requirements of standard ISO 9001:2015

CERTIFICATE - ANDRITZ · CERTIFICATE Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH is accredited according to the Austrian Accreditation Act by the projectBMWFW

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CERTIFICATE - ANDRITZ · CERTIFICATE Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH is accredited according to the Austrian Accreditation Act by the projectBMWFW

This qualityaustria certificate confirms the application and further development of an effective

The validity of the qualityaustria certificate will be maintained by annual surveillance audits and one renewal audit after three years.

Konrad ScheiberGeneral Manager

Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH,AT-1010 Vienna, Zelinkagasse 10/3

Vienna, 28 September 2020

Date of initial issue: 01 November 2008

Valid until: 30 October 2023

Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH awards this qualityaustria certificate to the following organisation:

Registration No.: 07389/1

The current validity of the certificate is documented exclusively on the Internet under http://www.qualityaustria.com/en/cert EAC: 19

b4862c43-eb6e-49fd-80ab-4bec1ae14783

CERTIFICATE

Quality Austria - Trainings,Zertifizierungs und

Begutachtungs GmbH isaccredited according to

the Austrian AccreditationAct by the BMWFW(Federal Ministry of

Science, Research andEconomy).

Quality Austria isaccredited as anorganisation for

environmental verificationby the BMLFUW (Federal

Ministry of Agriculture,Forestry, Environment and

Water Management).

Quality Austria isauthorized by the VDA

(Association of theAutomotive Industry).

For accreditationregistration details please

refer to the applicabledecisions or recognition

documents.

Quality Austria is theAustrian member of IQNet(International Certification

Network).

Dr. Mag. Anni KoubekSpecialist representative

ANDRITZ HYDRO GroupHeadquarter: A-1120 Vienna, Eibesbrunnergasse 20

Research, development, testing, sales, engineering, procurement, manufacturing, installation, commissioning, and project management of - Turn-key hydro power plants- Service, refurbishment, maintenance, optimization, and operation of plants- Turbines, Generators, Penstock, Gates- Automation, Electrical Power Systems- Pumps, Motors and Pumping Solutions- Turbo Generators

QUALITY MANAGEMENT SYSTEMcomplying with the requirements of standard

ISO 9001:2015