Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Certificate Click on the certificate to view details
ISO 900:2015 Appendix to Certificate ISO 45001:2018
ISO 14001:2015 ASME-N ASME-NPT
ASME-NA ASME-NS DIN EN ISO 3834-2
MANAGEMENT SYSTEM CERTIFICATE Certificate No: 149911-2014-AQ-IND-RvA
Initial certification date: 20 February 1999Expiry date of last certification cycle: 19 February 2020 Date of last recertification: 31 January 2020
Valid: 13 March 2020 - 19 February 2023
This is to certify that the management system of
Larsen & Toubro Limited L&T Heavy Engineering, Hazira Manufacturing Complex (HZMC), Surat – Hazira Road, P.O.: Batha, Village: Mora, Surat – 394 510, Gujarat, Indiaand the sites as mentioned in the appendix accompanying this certificate
has been found to conform to the Quality Management System standard: ISO 9001:2015
This certificate is valid for the following scope: Design & manufacture of boilers, pressure vessels, columns, heat exchangers, reactors, piping spools, bends, process plant internals and other fabrications including modification, revamp & upgradation of above in ferrous and non-ferrous materials for thermal power, chemical, petrochemical, refinery, oil & gas, fertilizer, nuclear & pharmaceutical industries
Place and date: For the issuing office: Chennai, 13 March 2020 DNV GL – Business Assurance
ROMA, No. 10, GST Road, Alandur, Chennai - PIN - 600 016, India
Sivadasan Madiyath Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands. TEL:+31(0)102922689. www.dnvgl.com/assurance
Certificate No: 149911-2014-AQ-IND-RvA Place and date: Chennai, 13 March 2020
Appendix to Certificate
Larsen & Toubro Limited Locations included in the certification are as follows:
Site Name Site Address Site Scope Larsen & Toubro Limited L&T Heavy Engineering, Hazira
Manufacturing Complex (HZMC), Surat – Hazira Road, P.O.: Batha, Village: Mora, Surat – 394 510, Gujarat, India
Design & manufacture of boilers, pressure vessels, columns, heat exchangers, reactors, piping spools, bends and other fabrications including modification, revamp & upgradation of above in ferrous and non-ferrous materials for thermal power, chemical, petrochemical, refinery, oil & gas, fertilizer, nuclear & pharmaceutical industries
Larsen & Toubro Limited L&T Heavy Engineering, L&T Piping Centre, Gate No. 9, Hazira Manufacturing Complex (West), P.O.: Batha, Village: Mora, Surat – 394 510, Gujarat, India
Design & manufacture of boilers, pressure vessels, columns, heat exchangers, reactors, piping spools, bends and other fabrications in ferrous and non-ferrous materials for thermal power, chemical, petrochemical, refinery, oil & gas, fertilizer, nuclear & pharmaceutical industries
Larsen & Toubro Limited L&T Heavy Engineering, Vadodara Heavy Engineering Works (VHEW) 101 & 1402, 1403, GIDC, Ranoli, District: Vadodara – 391 350, Gujarat, India
Design & manufacture of boilers, pressure vessels, columns, heat exchangers, reactors, piping spools, bends, process plant internals and other fabrications in ferrous and non-ferrous materials for thermal power, chemical, petrochemical, refinery, oil & gas, fertilizer, nuclear & pharmaceutical industries
Larsen & Toubro Limited L&T Heavy Engineering, Powai Campus, Gate No.1, Saki Vihar Road, Mumbai – 400 072, Maharashtra, India
Design & manufacture of boilers, pressure vessels, columns, heat exchangers, reactors, piping spools, bends and other fabrications in ferrous and non-ferrous materials for thermal power, chemical, petrochemical, refinery, oil & gas, fertilizer, nuclear & pharmaceutical industries
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands. TEL:+31(0)102922689. www.dnvgl.com/assurance
Page 1 of 1
Place and date: For the issuing office:Barendrecht, 02 June 2021 DNV - Business Assurance
Zwolseweg 1, 2994 LB Barendrecht, Netherlands
Erie KoekManagement Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands - TEL: +31(0)102922689. www.dnvgl.com/assurance
MANAGEMENT SYSTEM
CERTIFICATE
Certificate no.:288556-2019-AHSO-IND-RvA
Initial certification date:01 June 2018
Valid:02 June 2021 – 01 June 2024
This is to certify that the management system of
Larsen & Toubro Limited, L&T HeavyEngineering, Hazira Manufacturing ComplexPost: Bhatha, Surat,District: Surat - 394 510, Gujarat, India
has been found to conform to the Occupational Health and Safety Management System standard:
ISO 45001:2018
This certificate is valid for the following scope:
Design and manufacture of custom-built fabricated equipment, modules & systemsrequired for core sector industries
Place and date: For the issuing office:Chennai, 02 June 2021 DNV - Business Assurance
ROMA, No. 10, GST Road, Alandur,Chennai - 600 016,India
Sivadasan MadiyathManagement Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands - TEL: +31(0)102922689. www.dnvgl.com/assurance
MANAGEMENT SYSTEM
CERTIFICATE
Certificate no.:178194-2015-AE-IND-RvA
Initial certification date:02 June 2000
Valid:02 June 2021 – 01 June 2024
This is to certify that the management system of
Larsen & Toubro Limited, L&T HeavyEngineering, Hazira Manufacturing ComplexPost: Bhatha, Surat,District: Surat - 394 510, Gujarat, India
has been found to conform to the Environmental Management System standard:
ISO 14001:2015
This certificate is valid for the following scope:
Design and manufacture of custom-built fabricated equipment, modules & systemsrequired for core sector industries
CERTIFICATE OFAUTHORIZATION
The named company is authorized by the American Society of Mechanical Engineers (ASME) for the scope of activity shown below in accordance with the applicable rules of the ASME Boiler and Pressure Vessel Code. The use of the ASME Certification Mark and the authority granted by this Certificate of Authorization are subject to the provisions of the agreement set forth in the application. Any construction stamped with the ASME Certification Mark shall have been built strictly in accordance with the provisions of the ASME Boiler and Pressure Vessel Code.
COMPANY:
Larsen & Toubro Limited L&T Heavy Engineering
Hazira Manufacturing Complex Surat-Hazira Road
Surat, Gujarat 394510 India
SCOPE:
Construction of Class 1, 2, 3 & MC vessels; Class 1, 2 & 3 piping systems; Class 2 & 3 storage tanks; and Class CS core support structures at Hazira Manufacturing Complex, Surat-Hazira Road, 394510, Surat, Gujarat, India with additional Code
activities as described in the Quality Program Manual at Piping Centre, Gate No.9, Hazira Manufacturing Complex, Surat-Hazira Road, 394 510, Surat, Gujarat, India
AUTHORIZED: October 21, 2019
EXPIRES: October 21, 2022
CERTIFICATE NUMBER: N-4313-2
Board Chair, Conformity Assessment
Managing Director, Conformity Assessment
CERTIFICATE OFAUTHORIZATION
The named company is authorized by the American Society of Mechanical Engineers (ASME) for the scope of activity shown below in accordance with the applicable rules of the ASME Boiler and Pressure Vessel Code. The use of the ASME Certification Mark and the authority granted by this Certificate of Authorization are subject to the provisions of the agreement set forth in the application. Any construction stamped with the ASME Certification Mark shall have been built strictly in accordance with the provisions of the ASME Boiler and Pressure Vessel Code.
COMPANY:
Larsen & Toubro Limited L&T Heavy Engineering
Hazira Manufacturing Complex Surat-Hazira Road
Surat, Gujarat 394510 India
SCOPE:
Class 1, 2, 3, CS & MC fabrication without design responsibility and fabrication with design responsibility for Class 1, 2, 3, CS & MC appurtenances and
supplying ferrous & nonferrous material at Hazira Manufacturing Complex, Surat-Hazira Road, 394510, Surat, Gujarat, India with additional Code activities as described in the Quality Program Manual at Piping Centre, Gate No.9, Hazira
Manufacturing Complex, Surat-Hazira Road, 394 510, Surat, Gujarat, India
AUTHORIZED: October 21, 2019
EXPIRES: October 21, 2022
CERTIFICATE NUMBER: N-4312-2
Board Chair, Conformity Assessment
Managing Director, Conformity Assessment
CERTIFICATE OFAUTHORIZATION
The named company is authorized by the American Society of Mechanical Engineers (ASME) for the scope of activity shown below in accordance with the applicable rules of the ASME Boiler and Pressure Vessel Code. The use of the ASME Certification Mark and the authority granted by this Certificate of Authorization are subject to the provisions of the agreement set forth in the application. Any construction stamped with the ASME Certification Mark shall have been built strictly in accordance with the provisions of the ASME Boiler and Pressure Vessel Code.
COMPANY:
Larsen & Toubro Limited L&T Heavy Engineering
Hazira Manufacturing Complex Surat-Hazira Road
Surat, Gujarat 394510 India
SCOPE:
Class 1, 2, & 3 shop assembly at Hazira Manufacturing Complex, Surat-Hazira Road, 394510, Surat, Gujarat, India with additional Code activities as described in
the Quality Program Manual at Piping Centre, Gate No.9, Hazira Manufacturing Complex, Surat-Hazira Road, 394 510, Surat, Gujarat, India
AUTHORIZED: October 21, 2019
EXPIRES: October 21, 2022
CERTIFICATE NUMBER: N-3507-2
Board Chair, Conformity Assessment
Managing Director, Conformity Assessment
CERTIFICATE OF AUTHORIZATION
This certifies the named company as having had the adequacy of their quality assurance program verified for the scope of the activity shown below in accordance with the applicable rules of the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME). This certificate does not include authorization to use the ASME Certification Mark. The certification granted by this certificate is subject to the provisions of the agreement set forth in the application.
COMPANY:
Larsen & Toubro Limited L&T Heavy Engineering
Hazira Manufacturing Complex Surat-Hazira Road
Surat, Gujarat 394510 India
SCOPE:
Class 1, 2, 3 & MC fabrication without design responsibility and with design responsibility for supports at Hazira Manufacturing Complex, Surat-Hazira Road, 394510, Surat, Gujarat, India with additional Code activities as described in the
Quality Program Manual at Piping Centre, Gate No.9, Hazira Manufacturing Complex, Surat-Hazira Road, 394 510, Surat, Gujarat, India
AUTHORIZED: October 21, 2019
EXPIRES: October 21, 2022
CERTIFICATE NUMBER: N-4314-2
Board Chair, Conformity Assessment
Managing Director, Conformity Assessment
CERTIFICATE T0V NORD Systems GmbH & Co. KG
certifies that the company Larsen & Toubro Limited - Piping Centre
Gate No: 9, Hazira Manufacturing Complex (West) Surat - Hazira Road, P.O. Batha, Village: Mora,
Surat - 394 510, Gujarat, India
has been verified and recognized as welding workshop based on the requirements of the standard
DIN EN ISO 3834-2 Comprehensive quality requirements
Certificate-No.: 07 /204/9070/HS/37 48/18 The range of validity and details of the inspection can be seen
on the back page and in our report
No.: 8116332606 The company is using a quality assurance system,
technical equipment, qualified personnel and procedures for joining processes.
This certificate is valid until
October 2021
Hamburg, 2019-03-06
Certification body of TOV NORD Systems GmbH & Co. KG
Accredited Body
TOV NORD Systems GmbH & Co. KG • Technikzentrum • Certification Body Grof1.e Bahnstraf1.e 31 • 22525 Hamburg i(
Telefon (040) 8557-2368 • Fax (040) 8557-271 O • E-mail: [email protected] DAkkS Deu<sche
STW-ZE-ISO3834-FB-320_29a_zertifikat-ENG rev6(2018-11) Akkreditierunemelle D-ZE-11074-03-00