Cert ATEX-644 option I1 - Emerson Processeuedocs.emersonprocess.co.uk/groups/public/documents/markcom/rm… · 1 SUPPLEMENTARY EC- TYPE EXAMINATION CERTIFICATE 2 Equipment or Protective

Page 1/4CER1iATEX\EQUIP\CATI-2\P, Issue 1, Dated September 1998

Page 2/4

'-'* ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~

SUPPLEMENTARY EC- TYPE EXAMINATION CERTIFICATE1

2 Equipment or Protective System Intended for usein Potentially explosive atmospheres

Directive 94/9/EC

3 Supplementary EC- Type Examination Certificate Number: BASOOA TEXl 033X/l

4 Equipment or Protective System: MODEL 644H TEMPERATURE TRANSMITTER

5 Manufacturer: ROSEMOUNT INCORPORATED

6 Address: 12001 Technology Drive, Eden Prairie, Minnesota 55344-3695, USA

7 This supplementary certificate extends EC-Type Examination Certificate No. BASOOATEXIO33X toapply to equipment or protective systems designed and constructed in accordance with thespecification set out in the Schedule of the said Certificate but having any variations specified in theSchedule attached to this certificate and the documents therein referred to.

This Supplementary Certificate shall be held with the original Certificate.

This certificate may only be reproduced in its entirety and without any change, schedule included.

File No: EECS 0914/02/060

This certificate is granted subject to the general conditions of the ElectricalEquipment Certification Service. It does not necessarily indicate that the apparatusmay be used in particular industries or circumstances.

~ Electrical Equipment Certification Service Ti I M CLEARE~~ Health and Safety ExecutiveHSE Harpur Hill, Buxton, Derbyshire, SK17 9JN, United Kingdom DIRECTOR

Health & SafelY Tel: +44(0)129828000 Fax: +44(0)1298 28244 15 Ma y 2001E.ecullve . t b ., ail b ., inti @hsL ukm emet: www. asee.a.com e-m : asee.a. o.eecs gov.

~~~~~~~~~~~~~~~~~~~~~~~Page 1/2CERTlATEX\EQillP\CATI-2\S, Issue 1, Dated September 1998

"'*~~~~~~~~~~~~~~~~~~~~~

Schedule

SUPPLEMENTARY EC-TYPE EXAMINATION CERTIFICATE N° BASOOATEXIO33X/I

Description of the Variation to the Equipment or Protective System

To

pennit the use of an alternative rail mounting enclosure, thus fonning the:

MODEL 644R TEMPERATURE TRANSMITTER

BASEEFA Certification Report No 00(C)0848 dated 3 May 2001.

Essential

Health and Safety Requirements

Issue

AG

AC

AD

AC

Date2.9.01

10.17.00

10.17.00

9.5.00

DescriptionGeneral Arrangement

Flexible PCB Circuit Diagram

Flexible PCB Component Overlay

Flexible PCB Details

Number00644-0005 Sheets 1 and 2

00644-1106

00644-1108

00644-1109 Sheets 1 and 2

The above drawings are associated with BASOOATEXIO34X/1


"*~~~~~~~~~~~~~~~~~~~~~Page 2/2

CERTlATEX\EQUlP\CATI-2\S, Issue 1, Dated September 1998Page 1/2

\.~~~~~~~~~~~~~~~~~~~~~~;;;;:

13 Schedule

14 SUPPLEMENTARY EC-TYPE EXAMINATION CERTIFICATE N° BASOOATEXIO33X/2

Description of the Variation to the Equipment or Protective System

VARIATION 2.1

To permit:

1.

2.Minor mechanical and electrical modifications.Drawing information changes.

Report No.

None.

Special Conditions For Safe Use

See original certificate

Essential Health and Safety Requirements

See original certificate.

DRAWINGS

IssueACAK

AF

AF

Date3/21/00

3/21/01

3/21/01

6/19/00

DescriptionMain Board PWB

Main Board Coated

Main Board Schematic

LCD Board Assembly

Number

*00644-3200 Sheets 1 to 3

*00644-3201

*00644-3202 Sheets 1 & 2

03031-0591 Sheets 1 to 3

The above drawings are common to Certificate No. BASOOATEX3145/1

*These drawings are common to Certificate No. BASOOATEXIO34X/2


~::%~~~~~~~~~~~~~~~~~:%~~:--.

Page 2/2

Certificate NumberBASOOATEX1033X/3

Issued 20th December 2002Page 1 of 3

1

2 Equipment or Protective System Intended for use in Potentially Explosive AtmospheresDirective 94/9/EC

Supplementary EC -Type BAS OOATEXIO33X/3Examination Certificate Number:

3

4 Equipment or protective system: MODEL 644H TEMPERATURE TRANSMITTER

Manufacturer: ROSEMOUNT INCORPORATED

Address: 12001 Technology Drive, Eden Prairie,

Minnesota 55344-3695, USA

This supplementary certificate extends EC -Type Examination Certificate No. BASOOATEXIO33X to apply toequipment or protective systems designed and constructed in accordance with the specification set out in theSchedule of the said certificate but having any variations specified in the Schedule attached to this certificate andthe documents therein referred to.

5

6

7

This Supplementary Certificate shall be held with the original certificate.

The original certificate was issued by the Electrical Equipment Certification Service, Notified Body Number 0600,which retains responsibility for its original documentation. Baseefa (2001) Ltd., Notified Body Number 1180, isresponsible only for the additional work relating to this supplementary certificate and any other supplementarycertificate it has issued.

This certificate may only be reproduced in its entirety, without any change, schedule included.

Report No 02(C)0274 dated 20th December 2002

Baseefa (2001) Ltd. Customer Reference No. 0914 Project File No. 02/0274

~

This certificate is granted subject to the general terms and conditions ofBaseefa (2001) Ltd. It does not necessarily indicate that the equipmentmay be used in particular industries or circumstances.

.s-'

RSSINCLAIR

DIRECTOROn behalf of

Baseefa (2001) Ltd.

Baseefa (2001) Ltd.Health and Safety Laboratory Site, Harpur Hill,

Buxton, Derbyshire SK17 9JNTelephone +44 (0) 129828255 Fax +44 (0) 129828216

e-mail [email protected] web site www.baseefa2001.bizRegistered in England No. 4305578 at 13 Dovedale Crescent, Buxton,

Derbyshire, SK17 9BJ



Schedule

Description of the variation to the Eqnipment or Protective System

Variation 3.1

To permit the use of an alternative printed circuit board assembly having identical input and outputcharacteristics.

Variation 3.2

To pernlit further minor changes to the components on the new printed circuit board introduced at Variation 3.1

Report No.

02(C)O274

Special Conditions for Safe Use

None

Essential Health and Safety Requirements

Compliance with the Essential Health and Safety Requirements is not affected by this variation

Drawings and Documents

Issue DateNumber Sheet

Drawings associated with Variation 3.1

00644-0005 1

00644-0005 2

00644-4150 1

00644-4150 2

00644-6800 1

00644-6800 2

00644-6100 1

00644-6100 2

00644-6100 3

00644-6101 1

00644-6101 2

00644-6101 3

00644-6102 1

00644-6105 1

00644-6106 1

Description

AJ

AJ

AD

AD

AA

AA

AA

AA

AA

AA

AA

AA

AA

AB

AA

10/22/02

10/22/02

07/30/02

07/30/02

11/12/02

11/12/02

08/07/02

08/07/02

08/07/02

08/06/02

08/06/02

08/06/02

08/06/02

10/15/02

08/22/02

644H, 244E General Assembly

644H, 244E General Assembly

644H Case

644H Case

644H, 244E System Schematic

644H, 244E System Schematic

644H, 244E Main Board Schematic



644H, 244E Main Board PCB



644H Main Board CCA

644H, 244E Filter Board Schematic

644H, 244E Filter Board PCB



00644-6106 2 AA 08/22/02 644H, 244E Filter Board PCB

00644-6106 3 AA 08/22/02 644H, 244E Filter Board PCB

00644-6107 I AA 08/22/02 644 Filter Board Component Layout

00644-6107 2 AA 08/22/02 644 Filter Board Component Layout

00644-6107 3 AA 08/22/02 644 Filter Board Component Layout

644-6110 1 AA 11/18/02 644 Railmount Circuit Schematic

00644-6111 1 AA 11/18/02 644 Railmount Flex Circuit



*00644-1010 1 AK 10/29/02 644 IS Label

*00644-1010 3 AK 10/29/02 644 IS Label

*00644-1070 1 AD 10/29/02 644 IS Label Railmount



00644-1015 1 AG 10/29/02 644 Range Label

00644-1015 2 AG 10/29/02 644 Range Label

00644-1015 3 AG 10/29/02 644 Range Label

00644-1015 4 AG 10/29/02 644 Range Label

Drawings associated with Variation 3.2

00644-6100 1 AB 10/17/02 644H, 244E Main Board Schematic

00644-6100 2 AB 10/17/02 644H, 244EMainBoard Schematic

00644-6100 3 AB 10/17/02 644H, 244EMainBoard Schematic

00644-6101 1 AB 10/17/02 644H, 244E Main Board PCB

00644-6101 2 AB 10/17/02 644H,244EMainBoardPCB

00644-6101 3 AB 10/17/02 644H,244EMainBoardPCB

00644-6102 1 AB 10/17/02 644HMainBoardCCA

00644-6105 1 AC 10/22/02 644H, 244E Filter Board Schematic

00644-6106 1 AB 10/22/02 644H, 244E Filter Board PCB



00644-6107 1 AC 11/18/02 644 Filter Board Component Layout



The above drawings with the exception of those marked * are also associated with BASEEF A Certificate Nos.BASOOATEXI034X/3, BAS99ATEX3084U/2 and BASOOATEX3145/2