Central New Mexico Community College Professional & Personal · PDF fileprovide you with the core competencies you need to advance in the workplace ... Entrepreneurial Programs 19

Medical Coding 29 Cybersecurity 17 Media Making 9

cnm.edu/wtc | stemuluscenter.org

Professional & Personal Education PERSONAL GROWTH | WORKFORCE TRAINING | CONTRACT TRAINING

Central New Mexico Community College

Training Academies• Cyber Academy• Clinical Documentation

Improvement (CDI) Academy

• AutoCAD Academy

See full list on page 3.

2015 / 2016 PROGRAMS

2 CNM Professional & Personal Education | 2015 / 2016 Programs cnm.edu/wtc • stemuluscenter.org | Register online today!2

FUSE MakerSpace

The FUSE Makerspace and FabLab is a community center with tools that allow students and community members to design, prototype and create manufactured works.

We have a wide-range of equipment available in the following areas:

• 3D Printing • Woodworking • Metalworking • Welding • Sewing• Screen Printing • Electronics • Robotics • Laser Engraver

Courses and trainings are coming soon. All members must take the FUSE Basic Safety Seminar and are required to complete training courses or complete a proficiency test with each tool prior to operating any equipment owned by the Makerspace.

FUSE Makerspace has several different membership fee plans. Students receive a discount on membership fees.

For additional information contact [email protected]

fusemakerspace.org

stemuluscenter.org

FuseMakerspaceBuild Your Ideas

3cnm.edu/wtc • stemuluscenter.org | 505.224.5200 2015 / 2016 Programs | CNM Professional & Personal Education

2015 / 2016 Programs

AcademiesOur noncredit academies are designed to provide you with the core competencies you need to advance in the workplace or pursue new skills. These interactive and engaging academies are taught by industry experts. Find academies in this schedule and at our website.

www.cnm.edu/wtc

Clinical Document Improvement (CDI) Academy ............................29Incident Management Academy ...33Electronic Soldering Academy ......36AutoCAD Academy ........................4Cyber Academy ...........................14IT Professional Series ..................14Network Associate Series.............16PV Academy ...............................22Advanced PV Academy ................20Media Making Series .....................9Welding Series ............................38Water Utility Operator Series ........23Supervisor Academy ......................8Security Professional ...................17

General InfoSmall Business Development Center 41

Funding Sources 48

Refund Policy 48

Registration Form 49

Solar/PV 20 Photography 6 Ignite 19 Culinary 7

3

BUSINESS & COMPUTERSComputers & Technology 4

Digital Cameras 6

Food/Beverage 7

Leadership 9

Management/Human Resources 9

Marketing & Social Media 9

Project Management 12

Quality Improvement 13

CNM STEMULUS Cyber Academy 14

Entrepreneurial Programs 19

ENERGY & ENVIRONMENT LEED 20

Renewable Energy 20

Water Utility Operator 23

HEALTH, SAFETY & EDUCATION CPR/First Aid 26

EMS 27

Healthcare Professionals 27

Medical Coding 29

Nursing CNEs/Dental 32

Safety & OSHA 33

Swimming Pool Operator 35

Education 35

TECHNICAL COURSES Construction 36

Electrical CEUs 36

IPC/Soldering 36

Manufacturing/Welding 38

Mechanical 39

Transportation/Forklift 39

4

BUSINESS&COMPUTERSComputers & Technology | Digital Cameras | Food/Beverage | Leadership | Management/Human Resources | Marketing & Social Media | Project Management | Quality Improvement

CNM Professional & Personal Education | 2015 / 2016 Programs cnm.edu/wtc • stemuluscenter.org | Register online today!

COMPUTERS & TECHNOLOGY

AutoCAD AcademyUsed by architects, engineers, and other professionals who require com-puter assisted drafting and drawing techniques in their work, AutoCAD is one of the world’s leading 3D design tools. AutoCAD jobs are in demand, and WTC has the technology and AutoCAD 2014 software to keep you ahead of the curve. The instructor works personally with each student to facilitate in depth learning along each step of the way. In Beginning Au-toCAD, you will learn to communicate effectively with the software and learn basic techniques. In Intermediate AutoCAD, build on the knowl-edge and delve into the more advanced options. The Advanced AutoCAD module concludes in productivity techniques with 3D modeling and the exciting new world of 3D printing.

Sign up for the full academy series and save! $1,399

Beginning AutoCAD $499

This course provides the groundwork for using AutoCAD. You will learn to communicate effectively with the software; basic file management techniques of opening and saving drawings; initial drawing and editing commands to complete design documents; layer creation and manage-ment; proper layout techniques to facilitate the plotting of hard copies and/or pdf files from your drawings. Prerequisite: Basic computer fluen-cy, especially file management procedures. Note: This course is offered at the CNM Workforce Training Center

Instructor: Ed St. Martin; Ed St. Martin

Tue, Thu 5:30 pm - 8:30 pm & Sat 8:00 am - 12:00 pm / 9 sessions / Sep 8 – Sep 26

Tue 1:00 pm - 5:00 pm & Wed-Thu 1:00 pm - 4:00 pm / 9 sessions / Apr 5 – Apr 21

Intermediate AutoCAD $499

Building on the knowledge obtained in Beginning AutoCAD, this course will continue the exploration into more advanced drawing and editing commands. Learn advanced options within Text, Dimensioning and Lay-outs; explore the use of Blocks, including the use of attributes, and build a symbols library; link external references, Word documents, spreadsheets and image files to your drawing; streamline repetitive tasks such as creating layers, text styles and dimension styles. Prerequisite: Beginning AutoCAD or equivalent. Note: This course is offered at the CNM Workforce Training Center.


Tue, Thu 5:30 pm - 8:30 pm & Sat 8:00 am - 12:00 pm / 9 sessions / Oct 6 – Oct 24

Tue 1:00 pm - 5:00 pm & Wed, Thu 8:00 am-12:00 pm / 8 sessions / May 10 – May 26

Advanced AutoCAD $499

Starting with basic 3D modeling techniques, this final course delves into the 3rd dimension. Learn how to construct models from scratch, and how to take your existing 2 dimensional drawings and convert them into 3D. Once the models are built, enhance them with textures and materi-als to create photo-real images. Finally, take a flight through your model while recording it in a video. Finally, as an intro to the exciting world of 3D printing, you will have the opportunity to send your completed model to a local 3D print shop and leave class with a “print” of your model in your hand! Prerequisite: Intermediate AutoCAD or equivalent. Note: This course is offered at the CNM Workforce Training Center.


Tue, Thu 5:30 pm - 8:30 pm & Sat 8:00 am - 12:00 pm / 9 sessions / Nov 3 – Nov 21

Tue 1:00 pm - 5:00 pm & Wed-Thu 1:00 pm - 4:00 pm / 9 sessions / Jun 14 – Jun 30

Basic Computer Skills for Adult Learners $49

It’s never too late to learn a new skill! Confidence is key with basic computer skills. Learn to succeed with mouse and keyboard skills, an introduction to computer programs, and a look at the largest database on Earth - the internet. Begin from square one with an introduction to all the basic computer skills you need to get started on your home or work computer. Note: This course is offered at the CNM Workforce Training Center.

Instructor: CNM Instructor

Sat 9:00 am - 12:00 pm / 1 session / Sep 19

Sat 9:00 am - 12:00 pm / 1 session / Feb 6

Sat 9:00 am - 12:00 pm / 1 session / Jun 18


Excel with Excel 2010 $279

Excel is one of the most widely-used programs in the workplace today. Discover time saving tricks and begin preparing for a certification that looks great on your resume. Discover how to manage the worksheet en-vironment, create cell data, format and manage cells and worksheets, apply formulas and functions, present data visually, share worksheet data with other users, and analyze and organize data. This course has been retooled to help prepare you for the Microsoft Office Specialist (MOS) certification exam. For an additional fee, the exam can be offered following successful course completion. Note: This course has been re-tooled to help prepare you for the Microsoft Office Specialist certification exam. The exam can be offered for an additional fee following successful course completion. Students are encouraged to bring a flash drive with them to save classroom documents. This course is offered at the CNM Workforce Training Center.

Instructor: John Mims

Sat 9:00 am - 4:00 pm / 4 sessions / Sep 12 – Oct 3

Sat 9:00 am - 4:00 pm / 4 sessions / May 7 – May 28

NEW! Excel with Excel 2013 $329

Excel is one of the most widely-used programs in the workplace today. Discover time saving tricks and begin preparing for a certification that looks great on your resume. Discover how to manage the worksheet en-vironment, create cell data, format and manage cells and worksheets, apply formulas and functions, present data visually, share worksheet data with other users, and analyze and organize data. This course has been retooled to help prepare you for the Microsoft Office Specialist (MOS) certification exam. For an additional fee, the exam can be offered following successful course completion. Note: This course has been re-tooled to help prepare you for the Microsoft Office Specialist certification exam. The exam can be offered for an additional fee following successful course completion. Students are encouraged to bring a flash drive with them to save classroom documents. This course is offered at the CNM Workforce Training Center.


Sat 9:00 am - 4:00 pm / 4 sessions / Feb 27 – Mar 19

Word 2010 for the Workplace $329

Simplify your tasks in the workplace, and begin preparing for a cer-tification that looks great on your resume. Explore how to share and maintain documents, format content, apply page layout and reusable content, include illustrations and graphics, proofread, apply references and hyperlinks, perform mail merge options, and ensure that your docu-ments are professional and high-quality. This course has been retooled to help prepare you for the Microsoft Office Specialist (MOS) certification exam. For an additional fee, the exam can be offered following success-ful course completion. Note: This course has been retooled to prepare you for the Microsoft Office Specialist certification exam. The exam can be offered for an additional fee following successful course completion. Students are encouraged to bring a flash drive with them to save class-room documents.


Sat 9:00 am - 4:00 pm / 4 sessions / Aug 8 – Aug 29

Sat 9:00 am - 4:00 pm / 4 sessions / Jan 23 – Feb 13

NEW! Word 2013 for the Workplace $329

Simplify your tasks in the workplace, and begin preparing for a cer-tification that looks great on your resume. Explore how to share and maintain documents, format content, apply page layout and reusable content, include illustrations and graphics, proofread, apply references and hyperlinks, perform mail merge options, and ensure that your docu-ments are professional and high-quality. This course has been retooled to help prepare you for the Microsoft Office Specialist (MOS) certification exam. For an additional fee, the exam can be offered following success-ful course completion.


Sat 9:00 am - 4:00 pm / 4 sessions / Oct 17 – Nov 7

Sat 9:00 am - 4:00 pm / 4 sessions / Apr 2 – Apr 23

NEW! Mobile Applications: Android 3.0, Self-Paced $299

This course provides individuals with the knowledge and skills necessary to develop Android mobile applications for the commercial market. You will learn to build robust, commercial-grade Android applications, and will gain an understanding of how to extend application functionality. The course will also cover the steps to finalize applications for external release. This is a 41 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.

Instructor: Instructor for Pearson Workforce

Online / 1 session / Self-paced

6

BUSINESS&COMPUTERS


NEW! Mobile Applications: HTML5 3.0, Self-Paced $299

This course introduces individuals to HTML5 technology. You will learn about basic HTML, CSS, and Javascript, and will be introduced to the more complicated new features of HTML5. You will receive hands-on experience building web pages and mobile applications using HTML5. This is a 41 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! Mobile Applications: iOS 6 3.0, Self-Paced $299

This course provides learners with an introduction to iOS technology. Learners will learn how to design and build dynamic, commercial-grade mobile applications for the iPhone, iPad, and iPod Touch. The course will provide individuals with a comprehensive understanding of the iOS mobile user interface and the experience and maintenance of applica-tions. Finally, you will learn how to create successful user interfaces for your iOS applications. This is a 41 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! Introduction to Photoshop $149

Discover the most powerful and popular photo editing software available. Learn the basics of the best photo editing software in this hands-on workshop. You will learn about the basic interface, basic color correction techniques, targeting selected areas of the image, working with layers, basic retouching, and combining image elements. Feel free to bring one or two of your own images to work on. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Susan Herrington

Sat 9:00 am - 4:00 pm / 1 session / Oct 3

Sat 9:00 am - 4:00 pm / 1 session / Jan 16


DIGITAL CAMERAS

NEW! Basics of Photographic Evidence $99

Are you working in the medical or criminal justice field? Need help doc-umenting evidence through photography? Start with the basics of how a digital camera works followed by the proper procedures and techniques in preserving all that needs to be recorded. Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.

Instructor: Jerry Goffe

Tue 6:00 pm - 9:00 pm / 2 sessions / Oct 13 – Oct 20

NEW! Introduction to Forensic Photography $199

Walk into the world of CSI with an expert in photography and evidence preservation. Become educated in how to properly shoot crime scenes, crash scenes, and scene reconstruction. Learn how to photograph tire tracks, footprints, blood splatter, down to the intricate details. Photo-graphing at night and equipment recommendation will also be included. This class includes a weekend assignment. Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.


Tue 6:00 pm - 9:00 pm / 3 sessions / Oct 27 – Nov 10

NEW! Getting to Know Your Camera: Conveying your Message $99

Transform flat images with spectacular vision by applying the Nine Rules of Composition. Beginning and intermediate photographers will spend the week after class one applying what they know and bringing pictures back in week two for one-on-one coaching. This class is intended to be Part One of Composition. Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.

Instructor: Cathy Linford

Thu 6:00 pm - 9:00 pm / 2 sessions / Sep 17 – Sep 24

Thu 6:00 pm - 9:00 pm / 2 sessions / Feb 11 – Feb 18

NEW! Getting to Know Your Camera: Fast Action Photography $59

Do you live in the fast lane? Do you wish your photographs conveyed the thrill of the ride? You will amaze yourself with the transformation of your photographs once you master the techniques explored during this class. Sports activities, birds or fast cars you choose the target. Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.


Thu 6:00 pm - 9:00 pm / 1 session / Nov 12

Thu 6:00 pm - 9:00 pm / 1 session / Mar 24


NEW! Getting to Know Your Camera: Get the Shot $199

Conquer balance, control and depth by experimenting with shutter speeds, f stops, ISO, bracketing and white balance. You will also learn the difference between RAW and jpg files and the difference of settings for slow shots and fast speed shots. Control your camera instead of it controlling you. This class is intended to be Part Two of Composition. Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.


Thu 6:00 pm - 9:00 pm / 4 sessions / Oct 15 – Nov 5

Thu 6:00 pm - 9:00 pm / 4 sessions / Feb 25 – Mar 17

NEW! Getting to Know Your Camera: Make a House Shine in 2D $59

Real Estate Professionals- Wish you could make your client’s home stand out from the rest? Understanding how to setup tripods and holding the camera at just the right angle will give you the best shots of your houses indoors and out. Transform your photographs to show off the architecture and splendor of a home to get it sold. Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.


Thu 6:00 pm - 9:00 pm / 1 session / Dec 3

Thu 6:00 pm - 9:00 pm / 1 session / Apr 21

NEW! Getting to Know your Camera: More than Buttons $49

Ever wondered what the crooked arrow on your camera means? Work one-on-one with and expert to learn YOUR camera. Master the various auto settings and learn when and how to use them. Learn how and when to switch to manual settings and explore basic settings and effects for the perfect picture. Learn the camera, controls and functions, basic parts and settings as well as proper handling of the camera. Note: Bring your personal camera equipment. This course is offered at the CNM Work-force Training Center.


Thu 6:00 pm - 9:00 pm / 1 session / Sep 10

Thu 6:00 pm - 9:00 pm / 1 session / Feb 4

NEW! Getting to Know Your Camera: Slow Shutter Tips and Tricks $59

Ever wondered how to get the lights to show up just how you want at night? Learn about timed exposures and making moving objects look blurred to perfection. Intensive nighttime photography, tricks with slow shutter speeds, pan, zoom, stop-motion and long exposure photography - know it all. You will also learn how to make those waterfalls look just like silk! Note: Bring your personal camera equipment. This course is offered at the CNM Workforce Training Center.


Thu 6:00 pm - 9:00 pm / 1 session / Nov 19

Thu 6:00 pm - 9:00 pm / 1 session / Apr 14

NEW! Getting to Know Your Camera: Close Up and Macro Photography $199

Want more advanced instruction in the creative area of close up and macro photography? Learn about the equipment needed and how to light the subjects for flawless results. Subjects will include flowers and but-terflies, small objects such as postage stamps and jewelry. You’ll get images you will not only be proud of, you’ll want to have enlargements made to display. Note: This course is offered at the CNM Workforce Training Center.


Tue 6:00 pm - 9:00 pm / 3 sessions / Nov 17 – Dec 8*

*No class on Nov 24.

FOOD/BEVERAGE

NEW! Fresh Salsa $39

Fresh hot salsas! We’ll learn to make roasted jalapeno salsa, pico de gallo, salsa verde and a pineapple-mango salsa. We’re even going to make our own tortilla chips with oil, a recipe that is better for your heart. Class will combine theory and full lab participation. Recipes will also be provided. Proper culinary lab attire is required, including closed-toe gym or walking shoes, hair restraint, and long pants and long sleeves. Note: This course is offered at the CNM Main Campus Culinary Lab.

Instructor: Amanda Scott

Sat 1:00 pm - 4:00 pm / 1 session / Sep 19

NEW! Healthy Italian $75

Don’t let the title fool you. Gooey goodness awaits you as you craft piz-za, pasta and sauce from scratch using healthier cheese options, fresh ingredients, whole wheat flour, gluten free and vegan options and your favorite toppings. Demonstrations will be given for using a pasta ma-chine as well as filling pastas such as ravioli and agnolotti. There will be full lab participation and students will be making their own fresh pastas and pizza. Recipes will also be provided. Note: Proper culinary lab attire is required, including closed toe gym or walking shoes, hair restraint, and long pants and long sleeves. This course is offered at the CNM Main Campus Culinary Lab.


Sat 1:00 pm - 4:00 pm / 1 session / Nov 7

8

BUSINESS&COMPUTERS


NEW! Knife Safety $49Amaze your friends and co-workers by using your knives like a profes-sional. Slice, dice, cube and julienne with confidence. Whether you are looking to impress at work or your kitchen at home this class will change the way you prepare food. Beyond the veggies sharpening, knife care and knife quality will also be discussed. Students are encouraged to bring their own knives but not required. Enjoy the fruits of your labor by joining the class for a light lunch prepared by you. Note: This course is offered at the CNM Main Campus Culinary Lab.

Instructor: Penny DeRose


NEW! Sushi 101 $69

Sushi can be a very healthy part of any person’s diet. Students will learn that sushi does not mean raw fish and that anyone can enjoy sushi. Stu-dents will learn the uses of dashi, nori, futomaki, norimake, nigiri sushi, sashimi, as well as other parts of Japanese cuisine. Students will make sushi rolls of their choosing. Class will be full lab participation. Recipes will also be provided. Proper culinary lab attire is required, including closed toe gym or walking shoes, hair restraint, and long pants and long sleeves. Note: Proper culinary lab attire is required, including closed toe gym or walking shoes, hair restraint, and long pants and long sleeves. This course is offered at the CNM Main Campus Culinary Lab.


Sat 1:00 pm - 4:00 pm / 1 session / Jan 9

Supervisor AcademyCOMING SOON! JANUARY 2016

CNM Workforce Training Center has a condensed and revamped Supervisor Academy! Obtain effective supervisory skills by attending one of the most successful management programs in Albuquerque, and help your organization strive for excellence. Weekly modules address the fundamentals of successful supervision using 21st Century leadership strategies and provide personal assessments that will help on your journey of supervisory self-discovery. Courses are facilitated by trainers with extensive experience.

NEW – BASED ON FEEDBACK FROM OUR CUSTOMERS AND STUDENTS:

• 10 redesigned modules

• Applicable case studies and experiential learning activities

• Relevant readings and videos

• Online modules available for customized training for your organization

Meets Fridays from 9:00 a.m. – 4:00 p.m.

January 22 & 29 February 5, 12, 19 & 26 March 4, 11, 18 & 25

REGISTER NOW AT CNM.EDU/WTC OR CALL 224-5200 FOR MORE INFORMATION.

Beer Appreciation

Coming this Winter

Gain insight about what makes beer,

well, beer.

Call 224-4000 x 53188 to reserve your spot today!

Wine Connoisseur?

Would you l ik e to be?

Introducing

Exp lor ing Wine Offered in the Fall of 2015

Call 224-4000 x 53188

to reserve your spot today!

Beer Appreciation

Coming this Winter

Gain insight about what makes beer,

well, beer.

Call 224-4000 x 53188 to reserve your spot today!

Wine Connoisseur?

Would you l ik e to be?

Introducing

Exp lor ing Wine Offered in the Fall of 2015

Call 224-4000 x 53188

to reserve your spot today!


LEADERSHIP

NEW! Balanced Leadership for Women $495

Are you a woman people look up to and aspire to be? Would you like to be that woman? Join local women to address the importance of build-ing meaning for women in leadership. The journey begins by identifying strengths and purpose in what you are doing then continues by recogniz-ing how you reflect on success and failure. In order to take risks, women must speak up for their professional and personal dreams. Find your voice as a leader, create opportunities and utilize skills to reach your career goals. January 28, 2016 is a launch social to discuss profession-al expectations. You will then have 14 weeks to complete the on-line course with a networking social on April 28, 2016. Note: January 28, 2016 and April 28, 2016 are live classes to introduce and conclude the course. Class material is presented in an on-line form and is self paced with-in the 14 weeks. This course is offered at the CNM Workforce Training Center.

Instructor: Dawnn Moore

Thu 6:00 pm - 7:00 pm & Online / 2 classroom sessions /

Jan 28 – Apr 28

Emotional Intelligence $159

Intellectual and technical skills are no longer enough on their own to assure success in the workplace. Emotional Intelligence allows you to connect with others one-on-one and in groups-a critical skill in business today. People who are emotionally smart waste less time on personality conflicts, stay in control under stress and achieve greater satisfaction at work and at home. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Mary Davis Hamlin

Fri 9:00 am - 4:00 pm / 1 session / Sep 18

The Virtual Leader Toolkit $159

Discover the methods of managing a remote workforce - be it a virtual team or an at-home agent. Create a mobile workforce environment and an unmistakable synergy that is both contagious and sustainable. Learn to create work habits, work expectations, and a bond of trust through online member support and accountability and watch your team succeed like never before. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Debra Maese

Wed 9:00 am - 4:00 pm / 1 session / Nov 4

MANAGEMENT/HUMAN RESOURCES

NEW! Finance and Accounting for Nonfinancial Managers 3.0, Self-Paced $149

This course provides individuals with an overview of the principal areas of financial management. It introduces you to financial terminology, re-lates financial measures to operating information, and enables you to understand and apply these measures to operating performance. Individ-uals gain a working knowledge of financial management for application on a business or personal level by creating and analyzing financial state-ments and using the information in these statements to make decisions. This is a 34 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



MARKETING & SOCIAL MEDIA

Media Making SeriesDo you know the importance of being comfortable in front of a camera, getting the most out of your social media posts and creating buzz worthy podcasts and/or blogs? You can find out and learn these skills in CNM’s new Media Making Series. Whether you need to be a spokesperson for your company in a media interview, promote your business through social media, or create a game sharing video or podcast, your presence, your branding, and your familiarity with the current technology will be critical to your success. The Media Making Series, held at CNM’s STEMulus center, is devoted to developing useful internet based creative skills us-ing the lens of the social sciences and the humanities. We address topics such as how to create and edit a video resume, design social media visu-als that pop, create clear and effective podcasts and how to be a mobile journalist. You will meet other curious, sociable and technology savvy people in an atmosphere of exploration and enjoyment.

Sign up for four or more classes in the series for a 10% discount.

10

BUSINESS&COMPUTERS


NEW! Backpack Journalism: Mobile News Making and Blogging Like a Pro $139

Interested in becoming a photojournalist, video journalist, capturing au-dio or editing stories using industry standard software? Hungry for tips on how to survive in the ever changing world of journalism while meeting deadlines? Regardless of your topic area this workshop will provide the tools to enter the competitive field of mobile news making. Note: Please bring any equipment you will be using in the field whether it is camera, video camera, microphones, mobile phones, tablets or audio records. This class will be offered at the CNM STEMulus Center.

Instructor: Roberto Rosales

Tue 6:00 pm - 9:00 pm / 3 sessions / Sep 22 – Oct 6

Mon – Tue 9:00 am - 2:30 pm / 2 sessions / Mar 28 – 29

NEW! Being On Camera: Developing Your Presence and Delivering Your Message $69

Do you need to serve as the on camera spokesperson for your organi-zation/group? Promote yourself or start-up business through an online video? Learn more about creating livestream, shared gameplay and video blogs? Taught by 2 Kasa Style’s Chad Brummett, this class will offer strategic tips on how to develop your on camera presence. Note: This course is offered at the CNM STEMulus Center.

Instructor: Chad Brummett


Sat 10:00 am - 3:00 pm / 1 session / Apr 2

NEW! Fix It In the Mix: Podcasting & Audio Recording/Editing Techniques $89

Consistent, high quality audio is critical to attracting and keeping a pod-cast audience. Take this class to learn about hosting, recording, ed-iting, noise reduction, equalization, leveling, file structure, and more! Note: Students must bring their own audio equipment possibly including microphones, audio recording devices, etc. This equipment will not be provided. Please email CNM if you have questions about what make and model of equipment the instructor recommends. This course is offered at the CNM STEMulus Center.


Tue 6:00 pm - 9:00 pm / 2 sessions / Oct 27 – Nov 3

Wed 9:00 am - 4:00 pm / 1 session / Mar 30

Roberto RosalesRoberto is a staff photographer at Albuquerque Journal. He covers political news, sports, features, and because he is bilingual, he is also called upon to document immigration and border issues. He has covered other national news stories such as wildfires and Hurricane Katrina. Roberto also works on an ongoing photo project on fishermen in El Salvador, where he lived until he was 10. Roberto recently graduated with a Masters in Art Education from the University of New Mexico where he teaches several photojournalism classes. Roberto enjoys sharing the possibilities with students who are ready to learn a demanding skill to advance in the field of visual storytelling or photojournalism.

Roberto teaches:

• Backpack Journalism: Mobile News Making and Blogging Like a Pro

• Smart Phone & Tablet Photography: Take Photos that Speak for Themselves

www.cnm.edu/wtc

INSTRUCTOR PROFILE


NEW! Get Noticed!: SEO (Search Engine Optimization) & Other Strategies to Build Your Internet Reach $49

Establish and grow your organization’s/cause’s web presence by learning a wide range of internet marketing strategies. Topics include onsite fac-tors, page errors, META tags, link structure, and link building. Also, learn strategies in search engine and conversion optimization to make sure you get found and accomplish your goals! Note: This course is offered at the CNM STEMulus Center.


Sat 10:00 am - 3:00 pm / 1 session / Nov 14

Sat 10:00 am - 3:00 pm / 1 session / May 14

NEW! Smart Phone & Tablet Photography: Take Photos that Speak for Themselves $59

Using the NM International Balloon Fiesta as an outdoor laboratory, learn about lighting, composition, camera capacity & settings, and editing software/apps! Taught by ABQ Journal photojournalist, Roberto Rosales, this is a must take class for amateur photographers that want to make their photos pop! Note: Bring your smartphone or tablet. This equipment will not be provided. This course is offered at the CNM Workforce Train-ing Center.

Instructor: Roberto Rosales

Tue 6:00 pm - 9:00 pm / 2 sessions / Oct 6 – Oct 13

Tue 9:00 am - 4:00 pm / 1 session / Mar 29

NEW! The Wow Effect: Using Visual Social Media Effectively $49

Visual Social Media (e.g. Pinterest, Instagram, Tumbler, Vine) are con-sidered must haves for social media promotion. Take this class to learn why visual social media platforms work, how to use visual social media platforms strategically and tactically, and for tips on setting up and man-aging accounts to optimize their value. Taught by professionals for those at the basic level, this is the class to take if you want to punch up your visual social media presence. Note: This course is offered at the CNM STEMulus Center.


Tue 4:00 pm - 8:00 pm / 1 session / Feb 16

NEW! Video Editing: Making Your Video Footage Tell A Story $49

Gain technical skills to make video footage (such as the video you cap-tured in the Being On Camera class) look great! An entertainment pro-fessional will guide you on how to create a beginning, middle and end to your clip to create engaging video you can share. Note: Students are encouraged to bring video footage you would like to edit. This course is offered at the CNM Workforce Training Center.

Instructor: Chad Brummett



NEW! What’s in a Name?: Personal Branding Basics $49

Do you have a cause to promote? Want to make $ via a crowd funding site? Are you trying to get a start up business off the ground? Or are you just starting your social media presence and want to know the basics before you get in too deep? Learn how to build and manage your image by applying concepts from the fields of psychology, graphic design, and cultural studies. If you have a message that you want heard, this is the class for you! Note: This course is offered at the CNM STEMulus Center.


Tue 4:00 pm - 8:00 pm / 1 session / Jan 26

“Mr. Rosales’s teaching skills is not only interesting and educational, but so inspiring that I have begun my own career in Photo Journalism”— For Backpack Journalism Instructor, Roberto Rosales

12

BUSINESS&COMPUTERS


PROJECT MANAGEMENT

NEW! Certified Associate in Project Management 3.0, Self-Paced $699

This course will assist individuals in preparing for the Certified Associate in Project Management (CAPM) exam. Individuals will learn the termi-nology, tools, and techniques that are required to take a project from the initiating process to planning, executing, controlling, and closing. In addition to providing students with an overview of key concepts in PMI’s A Guide to the Project Management Body of Knowledge, Fifth Edition (PMBOK Guide), this course will include exercises intended to build confidence and raise your chances of passing the CAPM Exam.



NEW! Project Management Professional 3.0, Self-Paced $1,195

This course will assist students in preparation for the Project Manage-ment Professional (PMP) exam. Students will learn the terminology, tools, and techniques required to take a project through all process phases from initiating to planning, executing, monitoring, and controlling through closing. In addition to providing students with an overview of key concepts from PMI’s A Guide to the Project Management Body of Knowl-edge, Fifth Edition (PMBOK Guide), this course is designed to build confidence and raise the students’ chances of passing the PMP Exam. This is a 54 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



Chad Brummett Chad Brummett has worked professionally in film, television, broadcast and stage for over fifteen years. He received his Bachelors in Theater from the University of New Mexico, magna cum laude. Credits on film include 3:10 to Yuma, Beer For My Horses, The Lone Ranger and Transcendence. Television credits include In Plain Sight, Breaking Bad, Sex & Lies in Sin City and Georgia O’Keeffe. Chad is currently host and associate producer of 2 KASA Style, which airs weekday mornings on Albuquerque’s FOX affiliate, 2 KASA.

Chad Brummett teaches:

• Video Editing: Making Your Video Footage Tell a Story

• Being On Camera: Developing Your Presence and Delivering Your Message

www.cnm.edu/wtc

INSTRUCTOR PROFILE

Spring Break 2016

We all watch and read w

hat people put on the interne

t.

Spend the week learning how to build your v

irtual presence

and create messages important to you.

Become a backpack jo

urnalist, catching what is happenin

g

now and post for the world to see! Ge

t the inside scoop on

tips and tricks to improve your pro

duction.

Mobile Media Making & Pod Cast and A

udio production.

What you need t

o know to get your story out with flare and

function.

GREAT CLASS FOR EDUCATORS, ENTREPRENEUR

S,

BLOGGERS AND YOU!

MARK YOUR CALENDARS WEEK OF MARCH 28TH

Monday – Friday F For more info. [email protected]


QUALITY IMPROVEMENT

NEW! Lean Enterprise Certification I 3.0, Self-Paced $995

This course will enable you to sit for and successfully pass the Lean Essentials I Certification exam from the American Society for Quality. This is a 60 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! Six Sigma Black Belt 2.0, Self-Paced $1,495

This course provides an overview of the key concepts for the Six Sigma Black Belt Certification exam. It will explore process and team man-agement, operational metrics, and key tools and techniques to achieve process excellence. This is a 69 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, stu-dents have 6 months to complete the course before access expires.



NEW! Six Sigma Green Belt 3.0, Self-Paced $695

This course provides an overview of the key concepts for the Six Sigma Black Belt Certification exam. It will explore process and team man-agement, operational metrics, and key tools and techniques to achieve process excellence. This is a 69 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, stu-dents have 6 months to complete the course before access expires.



14

CNM STEMULUSCyber Academy | Entrepreneurial Programs


CYBER ACADEMY

Deep Dive Coding Bootcamp $5,495

The Deep Dive Coding Bootcamp is a 10-week (40+ hours per week) web development bootcamp taught at the CNM STEMulus Center in down-town Albuquerque. You’ll learn the fundamentals of modern web devel-opment and coding to build great websites, software, and apps. Weíll teach you the languages, tools and techniques used to build todayís best websites, software and apps, including: HTML5, JavaScript, jQue-ry, MySQL, CSS3 (browser-side), Object-oriented programming (OOP), and PHP (server-side). You’ll become proficient with test environments, GitHub collaboration and version control tools, Agile Development Meth-odology, and other development tools used by today’s best software shops. Note: This course is offered at the CNM STEMulus Center.

Instructor: Dylan McDonald

Mon-Thu 8:00 am - 5:00 pm & Fri 8:00 am - 12:30 pm / 48 sessions / Oct 12 – Dec 18*

*No class on Nov 26-27.

Mon-Thu 8:00 am - 5:00 pm & Fri 8:00 am - 12:30 pm / 49 sessions / Jan 11 – Mar 18*

*No class on Jan 18.

Mon-Thu 8:00 am - 5:00 pm & Fri 8:00 am - 12:30 pm / 49 sessions / Apr 11 – Jun 17*

*No class on May 30.

IT ProfessionalIT Professional trains students for entry-level employment in IT support, help desk, desktop support and general IT maintenance positions. The focus is on broad IT knowledge, technical customer support, trouble-shooting, analysis, and problem solving. Upon completion of this series, you will be prepared for CompTIA A+, Network+, Linux+, and Security+ certifications. These are blended learning classes, which means there is an online component in addition to the face to face classroom time.

The price of the series includes an HP laptop, textbooks, and exam fees.

Pre-requisite: An assessment exam or documentation of previous com-puter training may be required.


Dylan McDonald Dylan McDonald is a computer scientist by education, a programmer by trade, a teacher by passion, and he’s ecstatic to be able to combine and share his interests and experience with students at the Deep Dive Coding Bootcamp.

Dylan earned his Master’s Degree in Computer Science from Missouri University of Science & Technology. He was a software engineer for several years prior to making the long-desired move to Albuquerque. Dylan has been teaching in the classroom on and off since 2004, and he has been teaching the Deep Dive Coding Bootcamp since October 2013.

Dylan McDonald teaches:

• Deep Dive Coding Bootcamp

www.cnm.edu/wtc

INSTRUCTOR PROFILE


CompTIA A+ Certification Training $1,609

This comprehensive course, delivered in a blended learning format (on-line and classroom), will prepare students for the CompTIA A+ 220-801 and 220-802 certification exams. Develop the fundamentals of comput-er hardware and software as well as advanced concepts. The basics of computer hardware and Network Operating Systems (NOS) technologies are introduced in a lab-oriented environment. An added benefit included with this course is CompTIA’s revolutionary new study tool, CertMaster, which will help you succeed on your exam. This thorough training will not only prepare you for the certification exams, but it will also provide the skills needed for an entry level IT job. Note: Price includes CertMas-ter, A+ 220-801 and 220-802 exam vouchers, and retake vouchers if needed. This class will be offered at the CNM Workforce Training Center.

Instructor: William Peifer

Mon-Thu 6:00 pm - 8:00 pm & Online / 32 sessions /

September 28 - November 19

CompTIA Network+ Certification Training $1,339

Learn the installation and administration of Network Operating Systems including Microsoft Windows and Linux. Students will be instructed in a blended learning format (online and classroom) and in hands-on labs, in-cluding server setup, server configuration, basic administration of com-mon networking services and security administration with an emphasis on network communication protocols. Topics include, installation of the Network Operating System, configuration of network services, (i.e. file and print sharing) managing users, remote access, DHCP, FTP, HTTP and managing a network infrastructure. An added benefit included with this course is CompTIA’s revolutionary new study tool, CertMaster, which will help you succeed on your exam. This comprehensive course is prepa-ration for the CompTIA Network+ exam, and will develop your founda-tional skills in Network Operating Systems. Note: CertMaster, CompTIA Network+ exam voucher, and retake voucher if necessary are included in the price of the course. Vouchers are valid for 6 months upon course completion. This course is offered at the CNM Workforce Training Center and has an online component.

Instructor: Jerry Heater


November 30 - Jan 7, skip dates Dec 21 - Jan 1

CompTIA Linux+ Certification Training $1,599

Discover the LINUX operating system, with emphasis on the basic com-mands for the environment. Students will learn the LINUX file system and how to perform common file maintenance from the command line as well as the GUI. Covers how to install, upgrade and delete application packages, use network utilities and perform common system adminis-tration tasks. An added benefit included with this course is CompTIA’s revolutionary new study tool, CertMaster, which will help you succeed on your exam. This comprehensive course is preparation for the CompTIA Linux+ Powered by LPI exam. Note: CertMaster, CompTIA Linux+ LX0-101 and LX0-102 exam vouchers, and retake vouchers if necessary are included in the price of the course. Vouchers are valid for 6 months upon course completion. This course is offered at the CNM Workforce Training Center and has an online component.

Instructor: Srividya Iyer


Jan 19 - Feb 11

CompTIA Security+ Certification Training $1,649

Experience a comprehensive overview of computer and network security concepts that include: remote access, e-mail, the Web, directory and file transfer, wireless data, common network attacks, cryptography, op-erational/organizational security, disaster recovery, business continuity, and Cyber Ethics. An added benefit included with this course is Comp-TIA’ s revolutionary new study tool, CertMaster, which will help you suc-ceed on your exam. Delivered in a blended learning format (online and classroom), this comprehensive course is preparation for the CompTIA Security+ exam, and will develop your foundational skills in cyber secu-rity. Note: CertMaster, CompTIA Security+ exam voucher, and a retake voucher if necessary is included in the price of the course. Vouchers are valid for 6 months upon course completion. This course is offered at the CNM Workforce Training Center and has an online component.

Instructor: David Beach


Feb 22 - Apr 14

“I appreciate the new skills I have under my belt. I love Dylan. He has all of the knowledge and is a brilliant, brilliant guy”

— For Deep Dive Coding Bootcamp Instructor, Dylan McDonald

16

STEMULUS


Network AssociateThe Cisco Networking Academy helps individuals prepare for indus-try-recognized certifications and entry-level information technology (IT) careers in virtually every type of industry. Students develop foundational skills in IT while acquiring career skills in problem solving, collaboration, and critical thinking. These are blended learning classes, which means there is an online component in addition to the face to face classroom time.

The price includes the exam vouchers for the ICND1 and ICND2 exams.

Pre-requisite: Prior IT experience, IT Professional series, Network Pro, or CompTIA Network+ certifications.


NEW! Introduction to Networks $869

The Cisco Networking Academy helps individuals prepare for indus-try-recognized certifications and entry-level information technology (IT) careers in virtually every type of industry. Students develop foundational skills in IT while acquiring career skills in problem solving, collaboration, and critical thinking. In the Introduction to Networks course, students will learn to: Understand the devices and services used to support com-munications in data networks and the Internet, the role of protocol layers in data networks and the importance of addressing and naming schemes at various layers of data networks in IPv4 and IPv6 environments; De-sign, calculate, and apply subnet masks and addresses to fulfil given requirements in IPv4 and IPv6 networks; Explain fundamental Ethernet concepts such as media, services, and operations and build a simple Ethernet network using routers and switches; Use Cisco command-line interface (CLI) commands to perform basic router and switch configura-tions; Utilize common network utilities to verify small network operations and analyze data traffic.

Instructor: Scott Owen


Sep 28 - Oct 22

NEW! Routing & Switching Essentials $1,619

The Cisco Networking Academy helps individuals prepare for indus-try-recognized certifications and entry-level information technology (IT) careers in virtually every type of industry. Students develop foundational skills in IT while acquiring career skills in problem solving, collabora-tion, and critical thinking. In the Routing & Switching Essentials course, participants will learn how to: Describe the purpose, nature, and opera-tions of a router, routing tables, and the route lookup process; Describe how VLANs create logically separate networks and how routing occurs between them; Describe dynamic routing protocols, distance vector routing protocols, and link-state routing protocols; Configure and trou-bleshoot static routing and default routing (RIP and RIPng), an Open Shortest Path First (OSPF) network, access control lists (ACLs) for IPv4 and IPv6 networks, Dynamic Host Configuration Protocol (DHCP) for IPv4 and IPv6 networks, and Network Address Translation (NAT) op-erations. Note: Price includes ICND1 exam for CCENT certification. This course is offered at the CNM Workforce Training Center and has an online component.



Nov 2 – Nov 25

NEW! Scaling Networks $869

The Cisco Networking Academy helps individuals prepare for indus-try-recognized certifications and entry-level information technology (IT) careers in virtually every type of industry. Students develop foundational skills in IT while acquiring career skills in problem solving, collaboration, and critical thinking. In the Scaling Networks course, participants will learn to: Configure and troubleshoot enhanced switching technologies such as VLANs, Rapid Spanning, Tree Protocol (RSTP), Per VLAN Span-ning Tree Plus Protocol (PVST+), and EtherChannel, first hop redundan-cy protocols (HSRP) in a switched network, wireless routers and wireless clients, routers in a complex routed IPv4 or IPv6 network using sin-gle-area OSPF, multi-area OSPF, and Enhanced Interior Gateway Routing Protocol (EIGRP); Manage Cisco IS Software licensing and configura-tion files. Note: Price includes ICND1 exam for CCENT certification. This course is offered at the CNM Workforce Training Center and has an online component.



Dec 7 - Jan 14, skip dates Dec 21- Jan 1


NEW! Connecting Networks $1,839

The Cisco Networking Academy helps individuals prepare for indus-try-recognized certifications and entry-level information technology (IT) careers in virtually every type of industry. Students develop foundational skills in IT while acquiring career skills in problem solving, collaboration, and critical thinking. In the Connecting Networks course, participants will learn to: Describe different WAN technologies and their benefits and the operations and benefits of virtual private networks (VPNs) and tun-neling; Configure and troubleshoot serial connections, broadband con-nections, tunneling operations, and Network Address Translation (NAT) operations; Monitor and troubleshoot network operations using syslog, SNMP, and NetFlow; Understand and describe network architectures. Note: Price includes ICND2 certification, which taken with ICND1 qual-ifies for CCNA. This course is offered at the CNM Workforce Training Center and has an online component.



Jan 25 - Feb 18

Security ProfessionalAs an Information Technology professional you are aware that meeting training standards is crucial to your career. The Cyber Academy Securi-ty Professional certificate meets the training standards of CNSS 4011 and CNSS 4013 as well as DOD 8570.The STEMulus Cyber Academy curriculum will enhance your professional knowledge and advance the quality of your technology education while providing you the knowledge and skills for obtaining recognized and valued industry certifications in cybersecurity.


NEW! Network Security Administrator $1,599

The EC-Council’s ENSA certification looks at the network security in de-fensive view while the CEH certification program looks at the security in offensive mode. The ENSA program is designed to provide fundamental skills needed to analyze the internal and external security threats against a network, and to develop security policies that will protect an organi-zationís information. Students will learn how to evaluate network and Internet security issues and design, and how to implement successful security policies and firewall strategies. In addition, they will learn how to expose system and network vulnerabilities and defend against them. Note: Price includes EC-Council exam voucher. This class will be offered at the CNM Workforce Training Center.


Mon-Thu 5:30 pm - 8:00 pm & Online / 15 sessions / TBD

NEW! Certified Ethical Hacker $2,299

This is the worlds most advanced ethical hacking course with 19 of the most current security domains any ethical hacker will ever want to know when they are planning to beef up the information security posture of their organization. The goal of this course is to help you master an ethical hacking methodology that can be used in a penetration testing or ethical hacking situation. You walk out the door with hacking skills that are high-ly in demand, as well as the internationally recognized certified ethical hacker certification! This course prepares you for EC-Council Certified Ethical Hacker exam 312-50. Note: Price includes EC-Council exam voucher. This class will be offered at the CNM Workforce Training Center.

Instructor: Beau Nuanes


NEW! Disaster Recovery Professional $1,599

The EDRP course teaches you the methods in identifying vulnerabilities and takes appropriate countermeasures to prevent and mitigate failure risks for an organization. It also provides the networking professional with a foundation in it disaster recovery course principles, including preparation of a disaster recovery plan, assessment of risks in the en-terprise, development of policies, and procedures, and understanding of the roles and relationships of various members of an organization, im-plementation of the plan, and recovering from a disaster. This IT disaster recovery course EDRP takes an enterprise-wide approach to developing a disaster recovery plan. Students will learn how to create a secure net-work by putting policies and procedures in place, and how to restore a network in the event of a disaster. Note: Price includes EC-Council exam voucher. This class will be offered at the CNM Workforce Training Center.



18

STEMULUS


NEW! Computer Hacking Forensics Investigator $2,199

The CHFI course will give participants the necessary skills to identify an intruderís footprints and to properly gather the necessary evidence to prosecute. Many of todayís top tools of the forensic trade will be taught during this course, including software, hardware and specialized tech-niques. The need for businesses to become more efficient and integrated with one another, as well as the home user, has given way to a new type of criminal, the “cyber-criminal.” It is no longer a matter of if your or-ganization will be comprised (hacked) but, rather, when? Today’s battles between corporations, governments, and countries are no longer fought only in the typical arenas of boardrooms or battlefields using physical force. Now the battlefield starts in the technical realm, which ties into most every facet of modern day life. If you or your organization requires the knowledge or skills to identify, track, and prosecute the cybercrim-inal, then this is the course for you. Note: Price includes EC-Council exam voucher. This class will be offered at the CNM Workforce Training Center.

Instructor: Beau Nuanes


NEW! Secure Computer User $299

The purpose of the Secure Computer User training program is to pro-vide students with the necessary knowledge and skills to protect their information assets. This class will immerse students into an interactive environment where they will acquire fundamental understanding of vari-ous computer and network security threats such as identity theft, credit card fraud, online banking phishing scams, virus and backdoors, emails hoaxes, sex offenders lurking online, loss of confidential information, hacking attacks and social engineering. More importantly, the skills learnt from the class helps students take the necessary steps to mitigate their security exposure. The course includes a Certified Secure Computer User certification exam voucher, and excellent certification to have in the corporate world.

Instructor: EC-Council Instructor

Online / 1 Session / Self-Paced

NEW! CompTIA Security+ Certification Training - Online $1,199

Experience a comprehensive overview of computer and network security concepts that include: remote access, e-mail, the Web, directory and file transfer, wireless data, common network attacks, cryptography, op-erational/organizational security, disaster recovery, business continuity, and Cyber Ethics. This is an online, self-paced course, but you will have access to an experienced mentor who can guide you and answer any questions along the way. An added benefit included with this course is CompTIA’ s revolutionary new study tool, CertMaster, which will help you succeed on your exam. Delivered in a blended learning format (online and classroom), this comprehensive course is preparation for the Comp-TIA Security+ exam, and will develop your foundational skills in cyber security. Note: You will receive login instructions within two business days of your registration.


Online / 1 session / Aug 31 – Oct 23

Online / 1 session / Sep 28 – Nov 20

Online / 1 session / Oct 19 – Dec 11

Online / 1 session / Jan 18 – Mar 11

Online / 1 session / Feb 15 – Apr 8

Online / 1 session / Mar 14 – May 6

Online / 1 session / Apr 11 – Jun 3

Online / 1 session / May 9 – Jul 1

NEW! WordPress Fundamentals $459

Develop, manage, and maintain your own WordPress site, one of the most requested skills in the world. Nearly 20,000 people make money using WordPress every day, and now you can too! In this class you will learn how to use themes and plugins to customize your website. You will also learn to organize your content and publish search engine friendly pages. Take a look behind the scenes to better understand how themes and plugins work. This course is a combination of lectures and hands-on exercises that provide practical real-world experience. Note: This class will be offered at the CNM STEMulus Center.

Instructor: Paul Clark


Sat 9:00 am - 1:00 pm / 5 sessions / Mar 5 – Apr 2


ENTREPRENEURIAL PROGRAMS

NEW! Entrepreneurial Mindset $749

Inspired by the life story of Pulitzer nominee Clifton Taulbert, the Ice House Entrepreneurship Program is a powerful learning program de-signed to educate and engage participants in the fundamental aspects of an entrepreneurial mindset and the unlimited opportunities it can provide. Built for rigor and relevance, this highly interactive program enables participants to learn directly from the first-hand experience of successful, “unlikely” entrepreneurs. The overall objective is to empower learners by exposing them to entrepreneurial thinking while immersing them in real-world entrepreneurial experiences. Note: This class will be offered at the CNM STEMulus Center.

Instructor: Marvin Lozano

Fri 8:00 am - 12:00 pm / 12 sessions / Fall 2015

NEW! Entrepreneurial Mindset for CEOs and Leaders $749

For leaders in any organization, this is a condensed version of the En-trepreneurial Mindset program. Inspired by the life story of Pulitzer nominee Clifton Taulbert, the Ice House Entrepreneurship Program is a powerful learning program designed to educate and engage participants in the fundamental aspects of an entrepreneurial mindset and the un-limited opportunities it can provide. Built for rigor and relevance, this highly interactive program enables participants to learn directly from the first-hand experience of successful, “unlikely” entrepreneurs. The over-all objective is to empower learners by exposing them to entrepreneurial thinking while immersing them in real-world entrepreneurial experienc-es. Note: This class will be offered at the CNM STEMulus Center.

Instructor: Tom Darling

Mon-Tue 8:00 am - 5:00 pm / 2 sessions / Aug 17 – Aug 18

NEW! Ignite Community Accelerator $CALL

The IGNITE Community Accelerator helps local entrepreneurs accelerate the growth of their business by providing opportunities to learn and grow. The IGNITE programs and events support entrepreneurship and fill gaps for people trying to build and grow businesses in New Mexico. The IG-NITE 12-Week Program provides entrepreneurs with the business skills needed to move their companies forward, faster. The goal of the program is to provide training and support to entrepreneurs who are in the early stages of developing their business.

The 12-week program includes five full program days covering a vari-ety of entrepreneurship curriculum, including Entrepreneurship 101 and Telling Your Story, Building Company Infrastructure, Marketing and Managing Your Business, Financial Literacy, and Preparing for Lift-off.

The program culminates in IGNITE Day, where each company showcases their product or service and pitch their business to the community.

Note: This class will be offered at the CNM STEMulus Center.

Instructor: Tom Darling

Fri 9:00 am - 4:00 pm / 12 sessions / Sep 18 – Dec 11

Convenient, Affordable, and Effective.Take ed2go courses from the comfort of your home or office

at the times that are most convenient for you.

We offer you hundreds of engaging online courses for adults,

covering every topic from A-Z Grantwriting to Web Design.

Each ed2go course comes equipped with a patient and caring

instructor, lively discussions with your fellow students, and plenty of

practical information that you can put to immediate use.

www.cnm.edu/wtc [email protected]

IGNITE CommunityBusiness Accelerator

20

ENERGY&ENVIRONMENTLEED | Renewable Energy | Water Utility Operator


LEED

NEW! LEED 210: Green Building Core Concepts and Strategies for Healthcare 3.0, Self-Paced $299

The LEED 210: Green Building Core Concepts and Strategies for Health Care course introduces students to green design and operations concepts that are fundamental to LEED, and relates these concepts to the health care industry. Students will investigate concepts such as LEED corpo-rate social responsibility, integrated project team(s), environment, social and economic impact of sustainability strategies and actions, and green building issues unique to the healthcare industry. They will also gain the skills and knowledge they need to become leaders in their organization’s overall sustainability efforts and allow them to identify opportunities for expanding this role in the future. This is a 26 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! LEED 210: Green Building Core Concepts and Strategies for Services and Hospitality 3.0, Self-Paced $299

The LEED 210: Green Building Core Concepts and Strategies for Ser-vices and Hospitality course examines the intent and environmental, so-cial, and economic impact of the green building core concepts that are fundamental to the LEED (Leadership in Energy and Environmental De-sign) green building rating system. This course will review green building issues and core concepts of the LEED framework unique to the services and hospitality industry, as well as the key roles supporting sustainabil-ity in these settings. In addition, this course will provide the skills and knowledge for learners to become leaders in their organization’s overall sustainability efforts and allow them to identify opportunities for growing this role in the future. This is a 26 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



RENEWABLE ENERGY

Advanced Photovoltaic AcademyFor professionals already familiar with photovoltaic design and instal-lation, the Advanced PV Academy provides an opportunity to further your knowledge and experience with four modules including NEC for PV Installers, Off Grid Solar Electricity Design and Installation, Advanced PV System Design, and PV Operations and Maintenance. For those who need 40 hours of advanced solar training in preparation of becoming a NABCEP Certified PV Installation Professional, or if you’re already NAB-CEP certified but need to meet continuing education requirements, this academy is for you. These courses will make it possible for you to update your knowledge and available services in the solar industry.

Sign up for the full academy series and save! $799

NEC for PV Installers $269

NEC Updates are required to ensure safe and legal PV systems installa-tion. Maximize your ability to identify and follow changes to the National Electrical Code, focusing in particular on Article 690. Cover types of systems, circuit requirements, disconnecting means, wiring methods, grounding, marking, storage batteries, and utility interactive inverters to make sure that you are providing the best service possible. Constitutes eight hours of CEUs for Journeyman Electricians and advanced training required to sit for the NABCEP PV Installation Professional certification exam. Note: Textbook “Understanding NEC Requirements for Solar Pho-tovoltaic Systems” is included in the price of the course. This course is offered at the CNM Workforce Training Center.

Instructor: Aaron Cabral

1:00 pm - 5:00 pm & 9:00 am - 1:00 pm / 2 sessions /

Jan 22 – Jan 23

1:00 pm - 5:00 pm & 9:00 am - 1:00 pm / 2 sessions /

Jun 3 – Jun 4

Aaron Cabral Aaron, aka the Solar and Battery Guy, has been working in the Solar Photovoltaic (PV) Industry since 2007 and is currently contracting to different installation and EPC companies performing operating and maintenance of utility scale systems. His company also services and repairs residential grid-tie and off-grid systems. He is a North American Board of Certified Energy Practitioners (NABCEP) Certified PV Installer and has been Lead System Designer for many residential and commercial installations. He has a BA in Physics and Astronomy from UNM with a minor in Math and Electrical Engineering. He has been teaching courses in PV Installation, National Electrical Code (NEC), Advanced PV System Design, and Renewable Energy at CNM Workforce Training Center since 2008.

Aaron Cabral teaches:

• NEC for PV Installers

• Advanced PV System Design

• PV Operations & Maintenance

www.cnm.edu/wtc

INSTRUCTOR PROFILE


Off Grid Solar Electricity Design and Installation $199

Advance in your career by gaining additional knowledge of Off Grid PV systems. Describe and discuss the core principles of off grid living, ex-plain the differences between grid tied and off grid PV systems, describe the principal components used in an off grid PV system, provide basic sizing and design for a typical off grid PV system, and identify resources available to assist with design, sizing, and sourcing further assistance. If you need advanced training to take the NABCEP PV Installation Profes-sional Certification exam or Continuing Education for certification renew-al, this class is for you! Note: While the course will give you some addi-tional skills to prepare you for the NABCEP PV Installation Professional Certification exam , it is not written to correspond to specific sections of the NABCEP PV Installation Professional Study Guide. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Allan Sindelar

8:00 am - 5:00 pm / 1 session / Jan 30

8:00 am - 5:00 pm / 1 session / Jun 11

Advanced Photovoltaic System Design $199

Proper PV system design is the key to designing predictable and reliable systems. Learn to apply National Electrical Code standards and industry best practices to design the best systems for your company. You will leave this class with the knowledge to design and write a permitting package. Students will be provided unique solar PV system problems and will be required to solve them using previously acquired and new skills. If you need advanced training to take the NABCEP PV Installation Pro-fessional Certification exam or Continuing Education for recertification, we’ve got you covered. This course is also approved for eight CEUs for Electrical Journeymen. Note: While the course will give you some addi-tional skills to prepare you for the NABCEP PV Installation Professional exam, it is not written to correspond to specific sections of the NABCEP PV Installation Professional Study Guide. Note: This course is offered at the CNM Workforce Training Center.


8:00 am - 5:00 pm / 1 session / Feb 6, 8:00 am - 5:00 pm /

1 session / Jun 18

“Aaron is very knowledgeable and enthusiastic. He is passionate about what he teaches”— For Advanced PV System Design Instructor, Aaron Cabral

22

ENERGY&ENVIRONMENT


Photovoltaic Operations and Maintenance $269

Are you a solar energy professional in need of NABCEP or Electrical Journeyman Continuing Education Units? Do you need advanced solar training in preparation of becoming a NABCEP Certified PV Installation Professional? This class is for you. Grasp - literally - new skills through hands-on training in CNM’s Sustainable Technology Lab. Capture con-cepts like operation and troubleshooting of a grid tied batteryless PV system and explain maintenance requirements; discuss and demonstrate use of safety equipment and specialized tools used in the operation, maintenance, and inspection of operational grid tied batteryless PV sys-tems; discuss and demonstrate troubleshooting procedures; and perform operation, maintenance, and inspection procedures. Note: This course is offered at the CNM Workforce Training Center.


8:00 am - 5:00 pm / 2 sessions / Feb 12 – Feb 13

Fri-Sat 8:00 am - 5:00 pm / 2 sessions / Jun 24 – Jun 25

Photovoltaic AcademyDiscover the exciting field of solar photovoltaics (PV) and get the skills needed to prepare you for an entry level industry credential. This course benefits anyone already working in the solar industry who wants to earn a credential, anyone who is currently an electrician or construction worker who wants to add PV knowledge and hands-on installation to their skill set, or anyone who simply wants to learn more about PV system de-sign and installation. The PV Academy consists of three modules. In the first module you will be introduced to solar energy and solar electricity. This class is perfect for an overall understanding of solar energy. In the second module you will be introduced to PV system design and instal-lation, and you will receive hands on training in our state of the art lab. Complete attendance in the first two modules are required to take the NABCEP PV Entry Level exam. The third module is an exam prep class to help you prepare for the NABCEP PV Entry Level exam. The exam fee is included in the price of the PV Academy.


PV Academy Module 1: Introduction to Solar Energy and Solar Electricity $419

PV Academy Module 1: Introduction to Solar Energy and Solar Electricity $419

Go back to basics with an introduction to the fundamentals of Solar Energy and Solar Electricity, including a brief history of photovoltaics. Convert knowledge to power with definitions of basic electrical terms, techniques to calculate simple circuit values and predict solar positions, energy efficiency fundamentals, and discussion of photovoltaic markets and applications. Whether you’re a non-technical beginner working with photovoltaic services in sales, customer service, manufacturing and support staff or want to be a field worker like Journeyman Electricians and Electricians, this introduction is perfect to boost your confidence in solar energy. Price includes textbook and flash drive. PV Academy Mod-ules 1 and 2 are required for individuals seeking eligibility to sit for the NABCEP PV Entry Level Exam. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Jeffrey Granger

Fri-Sat 8:00 am - 5:00 pm / 1 session / Aug 14 – Aug 15

Fri-Sat 8:00 am - 5:00 pm / 2 sessions / Mar 4 – Mar 5

PV Academy Module 2: General PV and Installation $439

Ready for the next step? Achieve the success you want by training in ba-sic electricity and safety, system sizing, and basic photovoltaic electrical and mechanical design. Execute actual techniques and get hands-on exposure to all the tips and tools you need to design and install a system properly. NOTE: the last Saturday will be from 9:00 am - 4:00 pm. This course is approved for 30 CEUs for Electrical Journeymen. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Patrick Higgins

Sat 8:00 am - 5:00 pm / 4 sessions / Aug 22 – Sep 19


PV Academy Module 3: NABCEP Exam Prep $59

Get the grade! Prepare to take the NABCEP PV Entry Level examination and maximize your score. Note: This course is offered at the CNM Work-force Training Center.

Instructor: Patrick Higgins

Tue 3:00 pm - 7:00 pm / 1 session / Sep 22

Tue 3:00 pm - 7:00 pm / 1 session / Apr 5


NABCEP Solar PV Entry Level Exam $109

This exam is for new entrants in the industry. The exam demonstrates basic knowledge, comprehension and application of key terms and con-cepts of photovoltaic system design and installation. Requirements to sit for examination: Must bring a valid government issued photo ID. If you DID NOT complete PV Academy Module 1 & 2 through the CNM Workforce Training Center or the CNM Electrical Trades Photovoltaic Installation Certificate of Completion, you must provide documentation of completion of the minimum 40 hours of NABCEP board-recognized training such as certificate(s) or transcript(s). A PASSING SCORE ON THE NABCEP ENTRY LEVEL EXAM DOES NOT CONFER THE TITLE OF A NABCEP CERTIFIED INSTALLER OR ANY OTHER TITLE OR CRE-DENTIAL FROM NABCEP. A successful candidate may state that he or she has passed an Entry Level Exam issued by the North American Board of Certified Energy Practitioners (NABCEP). For more information on the NABCEP Entry Level Program, visit the NABCEP website at www.nab-cep.org. Note: This exam will be offered at the CNM Workforce Training Center.

Instructor: CNM Proctor

Sat 9:00 am - 11:00 am / 1 session / Sep 26

Sat 9:00 am - 11:00 am / 1 session / Apr 9

Photovoltaic (PV) Science, Technology & Manufacturing $339

Are you ready to discover the science and economics behind photovol-taics? In this three day course, you will learn about the science and economics behind photovoltaic (PV) solar to electric conversion technol-ogies, and how this has led to various methods for silicon cell and panel manufacturing. This course is designed for every manager, engineer, and technician entering the PV field, whether they are working directly for a PV manufacturer or system integrator or selling to PV manufacturers. Upon course completion, participants will be able to understand the reasoning behind the design of different silicon PV cells, identify the major issues associated with cell efficiencies and module performance, balance the tradeoffs associated with each technology, and be able to make informed decisions regarding different solar technologies. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Douglas Ruby

Tue-Thu 9:00 am - 4:00 pm / 3 sessions / Oct 13 – Oct 15

WATER UTILITY OPERATOR

Water Utility Operator Series for Levels 1 and 2 (30 Training Credits)Get the knowledge and training Credits required to sit for the Water Utility Operators, Levels 1 and 2, NM Water Systems Operator certifica-tion and the NM Sampling Technician certification exams. Water Utility Operators must work at least one year before taking the exam, however this series is also very beneficial for anyone wanting to get into this ca-reer field. This series includes four Water Utility Operator Levels 1 and 2 courses, and is offered at a significant discount as opposed to signing up for the courses individually. Each of the four classes qualifies for 7.5 Training Credits.


Sampling Technician 1 or 2 (7.5 Training Credits) $179

Review the content needed to prepare for the NM Sampling Technician I or II exam. This class is suitable for operators or those new to the field who are looking for a review of sampling and regulations topics. Course content includes material from the NM Water Sampling Certification Study Guide. Course content includes developing sample siting plans, an overview of SDWA regulations, requirements and techniques for prop-er organic, inorganic, radiological and microbiological sample collection, handling and processing, Total Coliform Rule/Groundwater Rule details as they relate to microbiological sampling, chlorine residual testing, and filling out lab forms. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Ray Dimas

Tue 8:00 am - 5:00 pm / 1 session / Oct 6

Water Utility Operator Levels 1 and 2; MATH REVIEW (7.5 Training Credits) $179

Having math problems? This class will help you refresh your basic to in-termediate level (up to Level 2) math understanding and get you thinking about using conversion factors and the different approaches to calculate areas, volumes and chemical feeds. The math needed to correctly op-erate your systems is not difficult, but your basic foundation must be strong and used frequently to keep it in your mind. We will discuss each concept in detail and work enough examples to establish that founda-tion. You will be given a copy of the equivalents and formula reference guide that is provided with each certification exam. Where appropriate, the example problems will be used to reinforce how to effectively use the 4-page reference guide. Attendees will also be given a copy of math chapter example problems from the water operator study guide, and each problem will be explained in detail. Please remember to bring a scien-tific calculator and paper for maximum enjoyment! Note: This course is offered at the CNM Workforce Training Center.


Wed 8:00 am - 5:00 pm / 1 session / Oct 7

24

ENERGY&ENVIRONMENT


Water Utility Operator Levels 1 and 2; Part 1 (7.5 Training Credits) $179

Suitable for operators who want an introduction to or review of the basics of drinking water system operations up to Level 2, this class is based on the introductory and intermediate level content in the NM Water Systems Operator Certification Study Manual. This session will address the dif-ferent methods of disinfection including on-site generation, and a more detailed explanation of the terms and concepts of chlorination. We will examine the different forms of chlorine that can be present in a water system, how they work together and how to carefully control them to reduce detrimental side-effects such as taste and by-products. Safety issues will be emphasized in handling chlorine. The distribution session will look at design, construction and operational fundamentals that can help resolve many of the issues that operators face on a daily basis. Class content will examine pipe materials and pressure ratings; installing, re-pairing, disinfecting, and cleaning waterlines; corrosion control; system valves, fire hydrants, service lines, and water meters; storage; distribu-tion system hydraulics; separation distances and cross connection con-trol. Water system operations and maintenance techniques that can help maintain compliance, improve water quality and extend the functional life of your system will also be discussed. Note: This course is offered at the CNM Workforce Training Center.


Thu 8:00 am - 5:00 pm / 1 session / Oct 8


Continue to review the basics of drinking water system operations up to Level 2. This class is based on the introductory and intermediate level content in the NM Water Systems Operator Certification Study Manual. You will look at the major components of operator safety such as hazard communication, fire protection, trenching and shoring, lockout-tagout, confined space and chlorine safety. Pumps and motors will include an introduction to pump types, their proper use, and advantages and dis-advantages; pump components; pump hydraulics and pump/motor siz-ing calculations; how to read pump curves; typical pump operation and maintenance problems and pump troubleshooting. Avoiding your neigh-bor’s wells and harmful contaminants while still achieving the produc-tion that your system needs is costly and not without risks. Groundwater hydrology and wells will begin with the hydrologic cycle and include a discussion about aquifer types, sources of contamination, drilling meth-ods, well construction and development, wellhead protection and well/pump system troubleshooting.


Fri 8:00 am - 5:00 pm / 1 session / Oct 9

Water Utility Operator Series for Levels 3 and 4 (30.5 Training Credits)Get the knowledge and training Credits required to prepare Water Utility Operators for Levels 3 and 4 of the NM Water Systems Operator certifi-cation. This series includes four Water Utility Operator Levels 3 and 4 courses, and is offered at a significant discount as opposed to signing up for the courses individually.



Managing Your Distribution System for Optimal Water Quality (8 Training Hours) $179

Review the basics of water distribution system design and operations. We will look at design, construction and operational fundamentals that can help resolve many of the issues that operators face on a daily basis. Class content will examine pipe materials and pressure ratings; installing, re-pairing, disinfecting, and cleaning waterlines; corrosion control; system valves, fire hydrants, service lines, and water meters; storage; distribu-tion system hydraulics; and cross connection control. Also covered is water system disinfection operations and maintenance techniques that can help maintain compliance, improve water quality and extend the functional life of your system. This class qualifies for 8 Training Credits with the NM Dept. of Environment for Water Utility Operator. Note: This course is offered at the CNM Workforce Training Center.

Instructor: James Jaramillo

Tue 8:00 am - 5:30 pm / 1 session / Oct 13

Water Utility Operator Levels 3 and 4; MATH REVIEW (7.5 Training Credits) $179

Review all levels of operator math (up to and including Level 4) with plenty of example problems explained in detail. Attendees will be given a copy of the equivalents and formula reference guide that is provided with each certification exam. Where appropriate, the example problems will be used to reinforce how to effectively use the 4-page reference guide. Attendees will also be given a copy of math chapter example problems from the water operator study guide, and each problem will be explained in detail.




Suitable for operators who want an advanced perspective of drinking wa-ter system operations up to Level 4, this class is based on the upper level content from Chapters 4, 5, 6, 8, 9 and 10 of the NM Water Systems Operator Certification Study Manual.


Thu 8:00 am - 5:00 pm / 1 session / Oct 15


Build on your strong foundation in drinking water treatment, for opera-tors who want to work towards their Level 3 or 4 certification and want to learn more about the complex and detailed surface water treatment regulations, surface water treatment technologies for turbidity & specif-ic dissolved contaminant removal, system optimization and disinfection by-products (DBP) reduction.



26

HEALTH&SAFETYCPR/ FIRST AID | EMS | Healthcare Professionals | Medical Coding | Nursing CNEs/Dental | Safety & OSHA | Swimming Pool Operator | Education


CPR/FIRST AID

AHA Basic Life Support (CPR) for Health Care Providers $79

Get the training you need to obtain an American Heart Association (AHA) Basic Life Support Certification. Ensure you are prepared for cardiopul-monary resuscitation (CPR) and managing foreign body airway obstruc-tion in infants, children, and adults alike. Solidify your knowledge of legal and ethical considerations, rescuer safety while performing CPR, and automatic external defibrillation (AED) and receive a two-year cer-tification through the AHA. This course follows the AHA guidelines for healthcare professionals. Note: This course is offered at the CNM Work-force Training Center.



Sat 9:00 am - 4:00 pm / 1 session / Dec 12



Sat 9:00 am - 4:00 pm / 1 session / Mar 26



AHA Basic Life Support (CPR) Renewal for Health Care Providers $59

Get the training you need to obtain an American Heart Association (AHA) Basic Life Support Certification. Ensure you are prepared with for car-diopulmonary resuscitation (CPR) and managing foreign body airway obstruction in infants, children, and adults alike. Recall principles of legal and ethical considerations, rescuer safety while performing CPR, and automatic external defibrillation (AED). This course follows the AHA guidelines for healthcare professionals. You must hold a current AHA Healthcare Provider certification or one that has recently expired to en-roll. Note: This course is offered at the CNM Workforce Training Center.


Tue 5:30 pm - 9:30 pm / 1 session / Sep 15

Tue 5:30 pm - 9:30 pm / 1 session / Nov 10

Wed 5:30 pm - 9:30 pm / 1 session / Dec 9

Wed 5:30 pm - 9:30 pm / 1 session / Jan 20

Wed 5:30 pm - 9:30 pm / 1 session / Feb 24

Wed 5:30 pm - 9:30 pm / 1 session / Apr 27

Tue 5:30 pm - 9:30 pm / 1 session / May 24


EMS

EMS Out-of-State Transition Course $495

New Mexico requires all out-of-state basic and intermediate applicants to attend an out-of-state transition course as a prerequisite prior to com-pleting the state written and practical licensure examination. Familiarize yourself with New Mexico EMS Guidelines: treatment, drugs, procedures and operations. You will receive a course manual and outline for eight hours of self-paced study aimed towards preparation of the New Mexico State written examination in addition to eight hours of instruction with a New Mexico State approved Instructor/Coordinator. Instruction is sce-nario- and skill-based, aimed towards preparation for the New Mexico State practical examination. The out-of-state transition course must be completed before you can be scheduled for the New Mexico state written and practical examination or be issued a full New Mexico EMS license. Upon course completion you will receive a Transition Course Completion Certificate, a verification letter signed by the instructor, and a “Request to Test/Request for Certification.” Note: Students must provide a copy of an EMT Course Completion Certificate (CCC) (completed within the past 12 months) or a current state certification or license; or, current National Registry EMT certification.

Students must also provide a copy of a current CPR card (front and back), “American Heart Association BLS Provider,”

“American Red Cross CPR for the Professional Rescuer” “American Red Cross CPR for the Professional Rescuer, “National Safety Council Adult CPR Level III or Professional Rescuer CPR Course,”

“Medic First Aid CPR Course or BLS Instructor Card.”

This course is offered at the CNM Main Campus.

Instructor: Vernon Honeyfield

Offered by request. Call 505-224-5200 for more information.

HEALTHCARE PROFESSIONALS

NEW! Certified Professional Health Care Compliance Officer 3.0, Self-Paced $299

This course prepares you to become certified Health Care Compliance Officers. Individuals develop an understanding of the key requirements needed to effectively develop, implement, and monitor a health care compliance program for their practices or help others in their compli-ance efforts, which are based on governmental regulatory guidelines. You will emerge from this course fully prepared to sit for the AAPC’s Certified Professional Compliance Officer (CPCO) certification exam. The certification exam itself is not part of this course. This is a 34 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



Mike Faulhaber Mike Faulhaber is a Paramedic and EMS educator in Albuquerque, NM. He has been involved in EMS education since 2000 as faculty at the UNM EMS Academy and also with the CNM EMS group. Mike has worked as an EMT and Paramedic as an in-hospital and pre-hospital provider in Albuquerque beginning in 1998. Currently, Mike is the Clinical Education Program Director for CNM. Mike is a member of the National Association of EMS Educators and is also a committee for Project Heart Start working to bring “hands-only” CPR and AED education to as many people possible statewide.

Mike Faulhaber teaches:

• Clinical Compliance Renewal – Online

• Project Heart Start

• EMS

INSTRUCTOR PROFILE

28

HEALTH&SAFETY


NEW! Certified Professional Medical Auditor 2.0, Self-Paced $399

The Certified Professional Medical Auditor course is designed to prepare individuals to become Certified Professional Medical Auditors (CPMA). Individuals will be able to use their experience with coding and docu-mentation guidelines in order to improve their practices revenue cycles. This is a 54 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! Clinical Compliance Renewal $25

This online course is designed to allow students currently enrolled in, or preparing to enroll in, a clinical course with a means to renew all of the yearly compliance requirements. This is a follow-up course to CNM’s HLTH 1001 which is required for nearly all healthcare programs. Upon successful completion of this course, students will receive a new Com-pliance Certificate and be able to apply fundamental knowledge of the following as it becomes necessary in the course of normal duties in the clinical environment: Bloodborne Pathogens Fire Safety Hazard Commu-nications Cultural Sensitivity HIPAA Infection Control Completion of a simple CPR knowledge quiz is also required. Note: This course is NOT eligible for college credit and serves only as a renewal mechanism for the aforementioned clinical requirements. Note: This course is NOT el-igible for college credit and serves only as a renewal mechanism for the aforementioned clinical requirements. You will have 10 days to complete the class.

Instructor: Mike Faulhaber

Online / 1 session / Sep 10 – Sep 17

NEW! Customer Service for Health Care 3.0, Self-Paced $299

This course provides participants with the basics of customer service for individuals seeking to work in the healthcare industry. In the past few years, the Centers for Medicare & Medicaid services have implemented a customer service survey called HCAHPS. The initiative is to measure patients’ satisfactions and perspectives on hospital care. The unique-ness of the HCAHPS survey also provides patients with a transparent viewpoint of their local hospitals and they may choose to which com-petitor they would like to return their investments. In response to the HCAHPS course, as well as the application of the new Patient Protection and Affordable Care Act, health care facilities are reevaluating customer service and implementing new patient service standards and regulations in their facilities. The goal of this course is to provide you with insight to the HCAHPS survey as well as the tools to provide excellent customer service in your field. This is a 41 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! HIPAA Privacy Rule Training for Health Care Organizations 3.0, Self-Paced $50

This course provides a foundation for all learners to the Health Insurance Portability and Accountability Act (HIPAA). The course defines HIPAA and introduces its most current information, including privacy rules and security rules, and provides students with opportunities to locate infor-mation on the HIPAA. Students are encouraged to consider HIPAA from the perspective of the patient as well as the Covered Entity. In addition, students are introduced to the HITECH Act and its impact on electronic medical records. At the end of the course, students will be able to im-plement safeguards with HIPAA. This is a 13 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! Introduction to Medical Terminology 3.0, Self-Paced $149

This course is a primer to common medical terminology for individuals new to the health care industry. It provides a survey of medical terminol-ogy, symbols and abbreviations, and the application of this new language in the field of health care. This is a 41 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.




NEW! Patient Access Specialist 3.0, Self-Paced $299

This is one of five courses comprising the Patient Access Specialist Pro-gram. This course introduces individuals to the many roles and respon-sibilities encompassed by the Patient Access Services department in a hospital setting. You will also learn about the delivery of the critical components of the revenue cycle and compliance issues with regulatory agencies. In addition, the course will provide you with an understanding of the role of correct patient identification practices in maintaining pa-tient safety and the need for extraordinary customer service skills in dif-ficult situations. Finally, you will gain the skills and knowledge required to sit for the Certified Healthcare Access Associate certification exam. This is a 41 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! Universal Precautions 3.0, Self-Paced $50

This course supplies training and information on the OSHA Bloodborne Pathogens Standard for individuals at risk of occupational exposure to blood and other potentially infectious materials (OPIM). This OSHA stan-dard is a federal mandate requiring the use of Universal Precautions and other engineering and work practice controls to provide a safe workplace for those employees. Exposure to blood and OPIM could result in trans-mission of bloodborne pathogens, which could lead to disease or death. This is a 13 time-on-task hour course. Time on task refers to the estimat-ed amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



MEDICAL CODING

Clinical Documentation Improvement (CDI) AcademyThere is a new role in healthcare information management called a Clin-ical Documentation Improvement Specialist (CDIS), Clinical Documen-tation Improvement Practitioner (CDIP), and/or Clinical Documentation Improvement RN. These specialists provide a vital educational link be-tween physicians and medical coders. This role has emerged in response to the Centers for Medicare and Medicaid Services (CMS) Diagnostic-Re-lated Group system (DRGs) initiatives to improve reporting of inpatient data and reimbursement to the hospital system.

According to a report by the AHIMA Foundation, the number of job post-ings for CDS jobs increased from 3,594 in 2007 to 8,039 in 2011, for a 223 percent increase in the number of job postings. As of 2011, the CDS role had the third highest number of job postings, following only coders and health information technicians. Finally, data show that CDS was the second fastest growing job title (633 in 2007 to 1,317 in 2011) in the health informatics area, second only to clinical analyst.20 eduperspectives.ahima.org.

Now is the time to become specialized in clinical documentation im-provement!

The ideal candidate for CNM CDI Academy is an RN with at least two years of bedside nursing within the last five years, or is an RHIT, or RHIA with a coding certification and at least two years inpatient medical cod-ing experience. These RNs and/or medical coders are experts in anatomy and physiology, medical terminology, are business-minded, analytical, detail oriented, are good communicators and problem solvers. Candi-dates must also be able to pass a criminal background check. Instruc-tors will provide face to face classroom practice and discussion time in addition to online assignments. There are quizzes and final exams to demonstrate competency in the class content.

Participants will be required to purchase their own 3M system access and bring recommended textbooks. A list will be provided by the in-structor.


NEW! Best Practices in Clinical Documentation Improvement $699

Now more than ever, correct medical coding and facilitating complete and accurate documentation is a must. Learn the basics of the clini-cal documentation improvement specialist/practitioner/RN role in this workshop with an expert in the field. Note: This class is one of three required for the Clinical Documentation Improvement Academy for RNs and/or experienced medical coders in addition to the 90 hour practicum. However, it may be taken by either audience as a stand alone class. Par-ticipants will need to bring their own recommended books and required access codes to the 3M system. Instructor will provide a book list prior to class start date. This class will be offered at the CNM Main Campus.

Instructor: Debbie Heller


30

HEALTH&SAFETY


NEW! Clinical Documentation Improvement (CDI) Practicum $399

This 90 hour practicum is for those participants in the CDI Academy Series. Participants will be able to apply what they have learned in the hospital setting with a preceptor. Note: Participants must have success-fully passed the three required classes before approval is received for the practicum. In addition, participants must be able to pass a criminal background check and be responsible for travel to and from the site.


Mon 7:00 am - 4:00 pm / 1 session / Apr 25

NEW! ICD-10 CM $799

ICD-10-CM far exceeds its predecessors in the number of concepts and codes provided. The disease classification has been expanded to include health-related conditions and to provide greater specificity at the sixth and seventh character level. Note: This class is one of three required for the Clinical Documentation Improvement Academy for RNs and/or expe-rienced medical coders in addition to the 90 hour practicum. However, it may be taken as a stand alone class by either audience. This course is offered at the CNM Main Campus.


Thu 5:30 pm - 8:00 pm / 12 sessions / Sep 24 – Dec 17*

*No class on Nov 26.

NEW! ICD-10 PCS $699

A joint effort between the healthcare provider and the medical coder is essential to achieve complete and accurate documentation, code assign-ment, and reporting of diagnoses and procedures for many reasons. In addition, assigning ICD-10-PCS (procedure codes) is required under the Health Insurance Portability and Accountability Act (HIPAA) starting on October 1, 2015 for hospital inpatient healthcare settings. What is new with the new ICD-10 procedure coding system? ICD-10 provides signif-icant improvements through greater detailed information. For example, ICD-10 PCS uses 7 alpha or numeric digits while the ICD-9-CM coding system uses only 3 or 4 numeric digits. And in the case of angioplasty, ICD-9 PCS has one code. With ICD-10 there are 854 codes to choose from specifying body part, approach, and device. Note: This class is one of three required for the Clinical Documentation Improvement Academy for RNs and/or experienced medical coders in addition to the 90 hour practicum. However, it may be taken by either audience as a stand alone class. Participants will need to bring their own recommended books and required access codes to the 3M system. Instructor will provide a book list prior to class start date. This course is offered at the CNM Main Campus.


Tue 5:30 pm - 8:00 pm / 10 sessions / Jan 5 – Mar 8*

*No class on Jan 18.

Anna CruzAfter working as a medical biller for 13 years Anna Cruz became a certified medical coder in 2003. She served as a remote outpatient coder for nine years. She has certifications through AHIMA: CCS, CCS/P, ICD-10-CM/PCS Trainer, Ambassador and through AAPC: CPC, and she has completed 1st and 2nd year Member at Large with NMAHIMA. Anna has been an instructor since 2002, has been teaching for CNM since 2005, and is a ICD-10 Dual Coding Auditor. She also trains at various entities throughout New Mexico in ICD-10-CM/PCS.

Anna Cruz teaches:

• ICD-10 Review for Coding Professionals

• Medical Coding Certification Prep Course

www.cnm.edu/wtc

INSTRUCTOR PROFILE


NEW! ICD-10 3.0, Self-Paced $349

This course provides individuals with an overview of the ICD-10 for both diagnosis and procedure coding. It covers the transition from ICD-9 to ICD-10 and reviews the changes and updates. Participants will learn the new codes, the structure, and nature of the characters. You will also learn how to use the appropriate reference manuals and guides to create diagnosis codes from the ICD-10-CM and procedure codes from the ICD-10-PCS. This is a 34 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! ICD-10 Review for Coding Professionals $499

This in person training is designed to provide participants with an over-view of the key information regarding the transition in medical billing and coding from ICD-9 to ICD-10. It will provide attendees with an over-view of the primary changes that all practitioners will need to know about in order to provide accurate information to medical billers and coders, and other important aspects as it relates directly to ensuring appropriate coding and payment processing. Those who successfully complete this course are eligible for AHIMA CEUs for use in fulfilling the continuing education requirements of the American Health Information Manage-ment Association. This course is designed specifically for students with previous coding experience or education and/or those already working in the field. ICD-10 coding students for this course should have: High school diploma/GED Minimum two years of experience with medical ter-minology, anatomy, physiology, pathology ICD-9-CM coding experience CPT-4 coding experience Have one of the following credentials: RHIA, RHIT, or CCS/CCS-P Have completed a coding training program that teaches anatomy & physiology, pathophysiology, pharmacology, med-ical terminology, reimbursement methodology, intermediate/ advanced ICD diagnostic/procedural and CPT coding Student must provide: Cur-rent-year Current Procedural Terminology (CPT), Current-year HealthCare Procedural Coding System (HCPCS). Note: This ICD-10 Coding review course is not an entry-level program! This course is offered at the CNM Workforce Training Center.

Instructor: Anna Cruz; JoAnn Martinez

Mon 5:30 pm - 8:30 pm / 8 sessions / Aug 3 – Sep 28*

*No class on Sep 7.

Mon, Wed 5:30 pm - 8:30 pm / 8 sessions / Jan 25 – Feb 17

NEW! ICD-10: For Allied Health Professionals 2.0, Self-Paced $199

The ICD-10: For Allied Health Professionals course will provide allied health professionals with key information regarding the transition from ICD-9-CM to ICD-10-CM/PCS. This short course will present an overview of ICD-10, the changes that practitioners will need to know about in order to provide accurate information to medical billers and coders, and other important aspects of ICD-10 that relate directly to ensuring appro-priate coding and payment. This is a 19 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



NEW! ICD-10: For Physicians 3.0, Self-Paced $199

The ICD-10: For Physicians course will provide physicians with key infor-mation regarding the transition in medical billing from ICD-9 to ICD-10. This short course will provide an overview of ICD-10 and the changes that physicians will need to know in order to provide accurate informa-tion to medical billers/coders. You will also learn about other important aspects of ICD-10 that directly relate to ensuring appropriate coding and payment. This is a 19 time-on-task hour course. Time on task refers to the estimated amount of time to complete all readings and assessment in a given course. Once the course has been accessed, students have 6 months to complete the course before access expires.



ICD-10 IS HERE!Are you ready for the

rollout? Enroll anytime in our affordable, convenient,

high quality, and in demand ICD-10 training.

Call 505-224-5200 if your organization needs

customized training.

32

HEALTH&SAFETY


NEW! Medical Coding Certification Prep Course $199

Are you are preparing to take the AAPC’s Certified Professional Coder (CPC) exam for the first time? Or are you retaking the exam for the sec-ond, third, or even fourth time? Review with an expert in the field and increase your potential for passing this highly sought after credential in the professional services (physician and non-physician practitioners) coding field. The CPC credential speaks to your expertise in reading medical charts and assigning correct diagnosis (ICD-9), procedure (CPT), and supply (HCPCS Level II) codes for a wide variety of clinical cases and services. In addition, CPCs often earn a higher salary, and/or hired and retained in today’s competitive coding job market com-pared with non-certified coders. Workshop Prerequisites: Completion of at least 80 contact hours of a coding preparation course OR two years of experience in physician practice medical coding. Please bring: Cur-rent-year ICD-9-CM, Volumes 1, 2 and 3 (any publisher, Professional edition), Current-year Current Procedural Terminology (CPT) (Profession-al edition), Current-year HealthCare Procedural Coding System (HCPCS) (Professional edition). Note: This course is offered at the CNM Workforce Training Center.

Instructor: Anna Cruz; JoAnn Martinez

Fri 2:00 pm - 6:00 pm & Sat 8:00 am - 12:00 pm / 2 sessions / Sep 11 – Sep 12

NURSING CNES/DENTAL

Asepsis Techniques for Dental Assistants in the Operating Room $769

Don’t leave anything to chance on the operating table. Deliver safe and quality service through training for basic techniques to oral and maxillo-facial surgery for pediatric and general dental assistants that assist their doctors in the operating room environment. Position yourself for success with surgical scrubbing, gloving, gowning, creating a sterile field, in-strument and supply set-up, sharps safety (e.g., needles and blades), electro-surgical safety, operating room fire safety, universal protocol/time out, latex allergy awareness, and malignant hyper-thermia response. If requested, an assessment of your strengths will be provided to the hos-pital operating room supervisor. Note: This course is offered at the CNM Main Campus.

Instructor: Caroline Geissler

Mon 2:00 pm - 6:00 pm / 2 sessions / Nov 2 – Nov 9

Introduction to I.V. Procedures for Healthcare Professionals $169

A competency-based course that covers both theory and skills for IV therapy, including indications for IV therapy, IV fluids and medications, IV equipment, safety & infection control, troubleshooting, recognizing & managing complications, and IV insertion and discontinuation tech-niques. Skills practice progresses from artificial arms to live sticks. This continuing nursing education activity was approved by New Mexico Nurs-es Association CNE Accredited Approver Unit, an accredited approver by the American Nurses Credentialing Center’s Commission on Accred-itation. In order to receive a Certificate of Completion you must sign in, be present the entire day, pass the post test with 80% success and submit an evaluation form. Materials provided. 7.1 hours CNEs. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Dusty Marie

Sat 8:30 am - 5:30 pm / 1 session / Aug 29




Sat 8:30 am - 5:30 pm / 1 session / Dec 12




PICC Line Training for Health Professionals $109

A competency-based course that covers everything you need to know for safe and effective care of PICC lines. This course includes the indica-tions for a PICC line, types of solutions and treatments, safety & infec-tion control, care and maintenance of the line, medication administra-tion technique, flushing procedure, dressing changes, troubleshooting, and discontinuation of the line. In order to receive a certificate of com-pletion, you must sign in, be present for the entire class, successfully complete a sterile dressing change, pass the post-test with a minimum of 80%, and submit an evaluation form. All materials are provided. This continuing nursing education activity was approved by New Mexico Nurs-es Association Accredited Approver Unit, an accredited approver by the American Nurses Credentialing Center’s Commission on Accreditation. Note: 4.5 CNE’s are awarded with full completion requirements. This course is offered at the CNM Workforce Training Center.

Instructor: Dusty Marie

Fri 12:00 pm - 5:00 pm / 1 session / Sep 11

Fri 12:00 pm - 5:00 pm / 1 session / Nov 13

Sat 12:00 pm - 5:00 pm / 1 session / Mar 12

Sat 12:00 pm - 5:00 pm / 1 session / Jun 11

SAFETY & OSHA

Incident Management AcademyDiscover emergency response and incident command management in this three course series. The courses cover: ICS-100.b; ICS 200.b; ICS 700.a; ICS- 800.b and ICS 300 of the FEMA Emergency Management Institute. You will both learn and practice Incident Command Manage-ment. You will also experience Personal Protection Equipment, focusing on respiratory equipment, including SCBA (Self Contained Breathing Apparatus) and participate in a hazardous chemical spill cleanup sim-ulations.

Course series includes Incident Command and Management; Incident Command Systems 300 and Hazardous Material Response and Personal Protection Equipment (PPE). Sign up for all three classes and save 20% off the cost of the series.


Hazardous Material Response and Personal Protection Equipment (PPE) $699

Learn and practice Hazardous Material Response cleanup including how to use Level 1 SUBA (Self Contained Breathing Apparatus) suits. Practice putting them on and using them! Review different respirators and filters and their uses. Other types of personal Protective Equipment (PPE) will also be demonstrated, it can save your life. Learn: where, when, and why workers require PPE, when it’s necessary, what types are needed in specific circumstances, how to properly don and take off PPE, and PPE care and maintenance and its limitations. Class covers Occu-pational Safety and Health Administration (OSHA) CFR 1910 Subpart I (Personal Protective Equipment) and OSHA CFR 1910.134 (Respiratory Protection). Clean up a chemical spill utilizing the skills you learned. Need signed medical release. Note: This course is offered at the CNM Workforce Training Center.

Instructor: David Barber

Thu, Fri 8:00 am - 5:00 pm / 2 sessions / Sep 17 – Sep 18

34

HEALTH&SAFETY


Incident Command and Management $199

Module 1 - Introduction to Incident Command Management - This course introduces the National Incident Management System and the Incident Command System. We will capture what each student wants to learn from the course and discuss how an incident at their company, agency or community can affect them and the benefits of being prepared. We will also get you prepared to take the online certification classes ICS 100, 200, 700 and 800 levels. Module 2 - Interagency and Multiagency Coor-dination Introduction and Team Simulation will review what you learned from the on-line courses and apply it to an actual simulation. ICS 100 Introduction to the Incident Command System ICS 200 Principals and Features of ICS IS 700 National Incident Management System Intro-duction IS 800 National Response Framework Introduction Present a scenario and discuss ways to apply these incident management systems. The scenario includes exercises to utilize the standardized ICS forms used to document incident information, initial objectives and strategies to control the scenario incident. Discuss resource management process-es and resources necessary to manage the scenario incident. Note: This course is offered at the CNM Workforce Training Center.

Instructor: John Schulte; John Schulte

Tue-Wed 1:00 pm - 5:00 pm & Online / 24 sessions /

Aug 18 – Sep 9

Incident Command ICS 300 $299

ICS-300 provides training and resources for personnel who require ad-vanced knowledge and application of the ICS. This course expands upon information covered in the ICS-100 and ICS-200 courses. Note: This course is offered at the CNM Workforce Training Center.

Instructor: John Schulte

Thu-Sat 8:00 am - 5:00 pm / 3 sessions / Sep 24 – Sep 26

OSHA 10 Construction $209

Ensure your ability to understand and follow OSHA’s policies, proce-dures, and regulations for the construction industry. Anticipate any emergency, emphasizing the most hazardous areas. Train for safety re-garding scaffolding, fall protection, and confined space entry. Rise to state and national standards with OSHA 29 CFR 1926 and receive your 10-hour Department of Labor card upon completion. Note: This course is offered at the CNM Workforce Training Center.

Instructor: David Barber

Sat 8:00 am - 3:00 pm / 2 sessions / Oct 24 – Oct 31


SWIMMING POOL OPERATOR

Swimming Pool Operator Certification $99

Want to become a certified swimming pool operator for the City of Al-buquerque or State of New Mexico? Act to ensure your certification by improving your knowledge of calculations I and II, filtration systems, circulation and water chemistry, water testing and adjustment, spas, City Ordinance rules and regulations, and the new State rules and regula-tions. Upon class completion, the Swimming Pool Operator examination will be administered (8 hours includes the exam). Note: This course is offered at the CNM Workforce Training Center.

Instructor: Marvin Bone

Wed 8:00 am - 5:00 pm / 1 session / Aug 5

Wed 8:00 am - 5:00 pm / 1 session / Sep 2


Wed 8:00 am - 5:00 pm / 1 session / Nov 4

Wed 8:00 am - 5:00 pm / 1 session / Feb 3

Wed 8:00 am - 5:00 pm / 1 session / Mar 2

Wed 8:00 am - 5:00 pm / 1 session / Apr 6

Wed 8:00 am - 5:00 pm / 1 session / Apr 20

Wed 8:00 am - 5:00 pm / 1 session / May 4

Wed 8:00 am - 5:00 pm / 1 session / May 18

Wed 8:00 am - 5:00 pm / 1 session / Jun 1

Swimming Pool Operator Recertification $69

If your Pool Operator Certification expires in the current calendar year, we’ll help you renew! Solidify your understanding of calculations I and II, filtration systems, circulation and water chemistry, water testing and adjustment, spas, City Ordinance rules and regulations, and the new State rules and regulations. Upon class completion, the Swimming Pool Operator examination will be administered (4 hours including exam). Note: This course is offered at the CNM Workforce Training Center.

Instructor: Marvin Bone

Wed 1:00 pm - 5:00 pm / 1 session / Aug 19

Wed 1:00 pm - 5:00 pm / 1 session / Mar 16

EDUCATION

Essential Academic Skills Review $99

Passing the Essential Academic Skills online exam is an essential ele-ment in the New Mexico educator’s licensure process. Get familiar with the format, scope and content of the Essential Academic Skills (EAS) online assessment. You will learn test-taking strategies based on knowl-edge and experience with the online EAS assessment and learn practice exercises in each subtest area. Strengthen your knowledge in the main subtest areas of: reading comprehension, mathematics, written expres-sion/constructed response as well as technology literacy. Read, practice, apply and guarantee success! Course price includes a book.

Instructor: Anne Marie Werner-Smith


36

TECHNICAL COURSESConstruction | Electrical CEUs | IPC/Soldering | Manufacturing/Welding | Mechanical | Transportation/Forklift


CONSTRUCTION

Backflow and Cross-Connections $799

This skills intensive course is focused on the requirements of installa-tion, repair and testing of backflow prevention assemblies. The outlining objectives are to prepare attendees to qualify for the backflow testers certificate. Note: This course is offered at the CNM Workforce Training Center.



ELECTRICAL CEUS

2014 National Electrical Code Update $199

You need 16 CEUs every three years to renew your license; eight of the CEUs must be in Electrical Code. Update your knowledge of the National Electrical Code, identify specific code changes, and be certain that you are providing the most up-to-date services to your clientele. This class is eligible for 8 CEUs for Journeyman Electricians by the NMCID. Mandato-ry text that you should bring with you to class: 2014 National Electrical Codebook (NFPA-70). Note: This course is offered at the CNM Workforce Training Center.

Instructor: Wes Mozley

Fri 8:00 am - 5:00 pm / 1 session / Aug 21


Fri 8:00 am - 5:00 pm / 1 session / Jan 8

Fri 8:00 am - 5:00 pm / 1 session / Mar 18

Fri 8:00 am - 5:00 pm / 1 session / May 13

Electrical Safety $199

Only you can prevent electrical accidents. Understand how electricity affects the body, the nature of electrical burns and shocks, and how to eliminate arc blast hazards. Implement proper working clearances and cover OSHA 1910 and OSHA 1926, Subparts E and K. This class is el-igible for 8 CEUs for Journeyman Electricians by the NMCID. Note: This course is offered at the CNM Workforce Training Center.


Fri 8:00 am - 5:00 pm / 1 session / Aug 7


Fri 8:00 am - 5:00 pm / 1 session / Feb 19

Fri 8:00 am - 5:00 pm / 1 session / Jun 24

NEW! Grounding & Bonding $199

Grounding and bonding theory is a must for successful electricians. Ex-plore systems, circuits, and equipment permitted, or not permitted to be grounded. Discuss circuit conductors to be grounded, location of ground-ing connections, type and size of grounding and bonding conductors, methods of bonding, and much more. Don’t miss out on your opportunity to be qualified in this area and on Article 250 of the National Electrical Code. This class is eligible for 8 CEUs for Journeyman Electricians by the NMCID. Note: This course is offered at the CNM Workforce Training Center.


Fri 8:00 am - 5:00 pm / 1 session / Apr 1

NFPA 70E $199

Proper application of NFPA 70E is essential to safeguard workers’ well-being. Establish a precedent of safety preparedness against fire, shock, arc flash, and arc blast and avoid life-threatening accidents. This class is eligible for 8 CEUs for Journeyman Electricians by the NMCID. Note: This course is offered at the CNM Workforce Training Center.


Fri 8:00 am - 5:00 pm / 1 session / Nov 13

IPC/SOLDERING

Electronic Soldering AcademyThis four week series is intended for people with little or no electronic component and soldering background and will provide the knowledge and skills to become an entry level electronics solderer. You may leave the course with the two most recognized national certifications’: IPC J-Std001F and IPC 610F.

This Academy consist of four classes and the cost is significantly dis-counted from the cost of all four classes taken individually.



Basic Electronics for Soldering $899

This 40 hour class provides an introduction to electrical components used in electronic soldering. Component identification and use is cov-ered. You will received three booklets and actual components to aid in your understanding. This class (or instructor approval) is a prerequisite for Introduction to Soldering. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Victoria Maestas

Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Sep 14 – Sep 18

Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Feb 15 – Feb 19

Introduction to Soldering $899

This 32 hour class will review soldering basics through hands-on prac-tice. Learn to achieve consistency in solder applications, and learn to meet industry quality standards. The class will prepare you for taking IPC-J Standard and IPC 610E, which are the next levels of training need-ed for IPC certification. Note: This course is offered at the CNM Work-force Training Center.


Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Sep 21 – Sep 25

Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Feb 22 – Feb 26

IPC J Standard $899

IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies, has emerged as the preeminent authority for electronics assembly manufacturing worldwide. The standard describes materials, methods and verification criteria for producing high-quality soldered leaded and lead-free interconnections. It emphasizes process control and establishes industry consensus requirements for a broad range of electronic connections. IPC J-STD-001F is recognized worldwide as the sole industry-consensus standard covering soldering materials and pro-cesses. This revision includes support for both traditional solder alloys and for lead-free manufacturing. Examples of some of the significant changes are revision to plated-through hole, PTH, minimum fill require-ments; criteria for two new SMT termination types; and expanded con-formal coating criteria. Whenever possible, the criteria descriptions have been adjusted to make them easier to understand for materials, methods and verification for producing quality soldered interconnections and as-semblies. Upon successful completion of the course and a course for the written examinations, you will receive an IPC Worker Proficiency Certif-icate and are registered with the IPC (Institute of Interconnecting and Packaging Electronic Circuits). Prerequisite: some soldering experience and successful completion of the open and closed book examinations. Note: This course is offered at the CNM Workforce Training Center.


Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Sep 28 – Oct 2

Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Feb 29 – Mar 4

IPC-610E Acceptability of Electronic Assemblies $899

IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610F illustrates industry-accepted workmanship criteria for electron-ics assemblies through detailed statements reflecting acceptable and defect conditions, supported by full-color photographs and illustrations. This revision includes two new SMT termination styles, as well as chang-es in plated-through hole fill and BGA void criteria. Additionally, wher-ever possible statements were modified to make readability easier and to enhance understanding - all without eliminating any requirements. Major topics include flex attachment, board-in-board, part-on-part, both lead-free and tin-lead criteria, component orientation and soldering cri-teria for through hole, SMT, cleaning, marking, coating and laminate requirements. IPC-A-610 is invaluable for all inspectors, operators and trainers. Revision F has 814 photos and illustrations of acceptability criteria - 86 of them new or updated. The document synchronizes to the requirements expressed in other industry consensus documents and is most often used with the material and process standard IPC J-STD-001F. Upon successful completion of this class you will receive an IPC 610F certification. Note: This course is offered at the CNM Workforce Training Center.


Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Oct 5 – Oct 9

Mon-Fri 8:00 am - 5:00 pm / 5 sessions / Mar 7 – Mar 11

38

TECHNICAL COURSES


MANUFACTURING/WELDING

SERIES: Basic and Advanced Welding: Fabrication/Metal ArtLearn how to Weld and then apply those skill to designing and, using advanced fabrication techniques, create your own Metal Sculpture Art . This series includes both the Basic Welding and the Advanced Welding: Fabrication and Metal Sculptured classes and is offered at a significant discount as opposed to signing up for each class individually.


Basics of Welding (40 hours) $799

Interested in welding? Ignite your passion with the fundamentals of this fiery activity. Learn the fundamentals of welding equipment safety, no-menclature, controls, setup, and operation. On completion, you will un-derstand and be able to demonstrate the fundamental rules of: general welding shop safety; equipment safety; proper welding nomenclature; use oxyfuel welding and cutting equipment. You will understand and describe: the chemical reaction in oxyfuel flames; select proper welding filler metal(s); cut straight, angled and contour profiles; describe the effects of torch angle, flame, filler material size, lap, tee and butt joints on thin gauge mild steel; interpret the characteristics in welding with DCSP, DCRP and AC current, and welding speed on gas welds; and use the SMAW process to interpret the characteristics of common welding electrode categories to set up and operate SMAW equipment. On the final day of this 40 hour course GMAW (MIG) welding will be covered. You will be receiving handouts so you may want to bring a 3 ring binder, also safety glasses, leather boots and 80% to 100% cotton work clothing (pants and shirts) are required to go into the lab area. The safety glasses can be purchased at Home Depot or any hardware store/welding vendor for a few dollars, the cotton shirt and pants can be picked up from any thrift store for cheap. As for the boots if you have a pair of leather shoes we could probably make them work, as opposed to nylon or cotton tennis shoes. Note: This course is offered at the CNM Main Campus

Instructor: Ron Hackney

Sun 8:00 am - 4:30 pm / 5 sessions / Sep 20 – Oct 18, also Mar 6 – Apr 3

Advanced Welding: Fabrication and Metal Art $799

The only limit is your imagination. Learn how to create art from metal. There is a growing market for metal sculpture. You will learn advanced welding techniques that focuses on combining art and welding technolo-gy. The objective of the course is to train participants to produce quality welds, study its use regarding various fabrication applications, and apply these techniques to create a piece of metal art. You will build light, small projects such as plant stands, stools, tables, plant hangers, “Art”, possibly a metal sculpture, the ideas are endless; and then take them home. No projects involving “flammable” materials will be allowed. You will be receiving handouts so you may want to bring a 3 ring binder, also safety glasses, leather boots and 80% to 100% cotton work clothing (pants and shirts) are required to go into the lab area. The safety glasses can be purchased at Home Depot or any hardware store/welding vendor for a few dollars, the cotton shirt and pants can be picked up from any thrift store for cheap. As for the boots if you have a pair of leather shoes we could probably make them work, as opposed to nylon or cotton tennis shoes. Steel toed is advised. Prerequisite: Basics of Welding or equiva-lent, instructor must approve. You will provide all metal supplies for your project. You may review this with the instructor prior to the start date of the class. Note: There will be no class Thanksgiving weekend, Sunday 11/29/15. This course is offered at the CNM Main Campus.

Instructor: Ron Hackney

Sun 8:00 am - 5:00 pm / 6 sessions / Nov 1 – Dec 6

Sun 8:00 am - 5:00 pm / 5 sessions / Apr 17 – May 15

NEW! Welding Certification for AWS D1.1 Structural Steel Code 2010 $999

This class will help you certify for the AWS D1.1 Structural Certification using the SMAW process. Students will be required to follow proper WPS (Welding Procedure Specifications) and perform weld tests in front of instructor prior to their certification test. Class includes practice time to prepare for the certification. Proper materials, consumables and ma-chines needed to certify are all included in the cost of the class, but students will need to bring their own PPE and tools. Upon successfully completing the required test plates for the AWS D1.1, SMAW process, with 3/8î plate open root 6010 / 7018 requirements, students will take the certification test by the appointed CWI. The certification test cost is not included in class price. The certification will include AWS D1.1 Structural Steel Code 2010 in the following ranges: Process: SMAW; Positions: 1G, 2G, 3G, 4G; Thickness : 1/8î - 3/4î; Joint: Grove; F No.: 4.

Note: If you do not know or understand the information provided, you are likely not at the educational and skill level required for this course. Everyone who takes this class is not guaranteed to certify with the cre-dentials listed. This course is offered at the CNM Main Campus.

Instructor: Kay Hamby

Mon-Thu 7:30 am - 4:30 pm / 4 sessions / May 2 – May 5“This course really improved my skill and confidence”

— For Advanced Welding Instructor, Ron Hackney


MECHANICAL

2012 Mechanical Code Update $199

A solid understanding of the ICC Mechanical Code is essential for NM Journeymen. Ensure you have the most up-to-date knowledge regard-ing code, especially the effects of the general rule changes within the ICC Mechanical Code which influence building inspectors, contractors, equipment installers, and facilities managers. Sign up today to ensure you’ve got what it takes to comply with legal requirements while earning 8 CEUs. Current code: International Mechanical Code 2012 Note: This course is offered at the CNM Workforce Training Center.

Instructor: David Jensen



Journeyman Plumbing Code Update $199

This one-day seminar provides you the unique opportunity to learn the basic requirements of the 2009 Uniform Plumbing Code. The eight-hour session will include informative discussions covering code approved terms and definitions, traps and interceptors, materials, sizing drain, waste and vent systems. A copy of the 2012 Uniform Plumbing Code is required for this class. This class counts for 8 hours of CEU’s. Note: This course is offered at the CNM Workforce Training Center.

Instructor: David Jensen


Sat 8:00 am - 5:00 pm / 1 session / Mar 5

Bicycle Mechanic (Park Tool) 101 $199

Tame your bicycle! Learn the basic repair and maintenance skills for both novices and advanced cyclists. Improve safety through maintaining the bicycle, repairing flats, adjusting brakes, headsets, and wheel hubs, and wheel truing. Never worked with your drive train before? No prob-lem. Explore how to adjust gears, replace cables and housing, change a cassette, remove the cranks and bottom bracket, and keep the drive train running smoothly. Reduce the risk of accidents by watching a road 101 bike safety instruction video by “The League of American Cyclists” followed by a class discussion. Gain a Park Tool 101 certificate upon completion of the class. Requirements: a working bicycle and a helmet. Price includes a Repair Manual. Note: This course is offered at the CNM Workforce Training Center.

Instructor: Eugene (Paul) Walton

Mon 5:00 pm - 9:00 pm / 3 sessions / Aug 17 – Aug 31

Mon 5:00 pm - 9:00 pm / 3 sessions / Feb 1 – Mar 7

Bicycle Mechanic Advanced: Park Tool 202 $209

The Park Tool Mechanic 202 Class is designed to advance the skills of students who have completed the 101 class. Students will apply their 101 knowledge and take their mechanic ability to the next level. This class will consist mostly of lab time. Students will increase their me-chanical ability by making ALL the adjustments acquired to have a safe and working bike. Students will replace cables and housing and make adjustments, lube and adjust headsets and bottom brackets. Subse-quently, students will also advance their wheel/spoke adjustment skills. Please bring your most modern and working bike to class. Bring the nec-essary cables and housing for front and rear derailleur replacement (es-timated cost $12-$20) Students will receive a Park Tool 202 certificate upon passing the class. Students must pass a written and mechanical test with a score of 75% or greater to receive the certificate. This is a 12 hour class. Students must have completed the Park Tool 101 class or get special permission from instructor. Bring your own food/snacks and refreshments. Note: Attendees will have to buy parts and supplies, instructor will provide a materials list. This course is offered at the CNM Workforce Training Center.

Instructor: Eugene (Paul) Walton

Mon 5:00 pm - 9:00 pm / 3 sessions / Oct 5 – Oct 19

Mon 5:00 pm - 9:00 pm / 3 sessions / Mar 14 – Apr 4

TRANSPORTATION/FORKLIFT

Forklift Operator Training $229

Forklift operation can be dangerous and difficult - so don’t start without Forklift Operator Training. Set up for success with in-depth instruction on applicable regulations, safe forklift operation, OSHA requirements, safety decals and information, and hazards. Ensure your ability to in-spect, start, and operate equipment, maneuver the forklift, and perform necessary maintenance. Prove operational competence and you will re-ceive documentation of successful program completion. Minimum age of 18 years required. This class is held at 901 Buena Vista SE in the Warehouse located in the SE corner of the building. You will receive a map by email after you register. Note: This course is offered at the CNM Main Campus.


Sat 8:00 am - 5:00 pm / 1 session / Sep 19, Apr 9

40 CNM Professional & Personal Education | 2015 / 2016 Programs cnm.edu/wtc • stemuluscenter.org | Register online today!

Ask.A simple request is usually all it takes.

Show the Catalog.Get your boss to read it. Attach it to a memo.

Stress the Benefits.Additional skills training will make you a more productive employee.

Emphasize the Convenience.Why go out of town for training when you can get quality training right here?

Compare the Pricing.Your employer will be pleased to know they are paying a little less and getting a lot.Check the prices. They’re hard to beat!

HOW YOU CAN GET YOUR EMPLOYER TO SEND YOU TO CLASS:

www.cnm.edu/wtc


CNM SBDC5600 Eagle Rock Ave. N.E.Albuquerque, NM 87113505.224.5250 / Fax: [email protected]/albuquerquewww.cnm.edu/depts/abqsbdc

Follow us on Social Media: www.facebook.com/albuquerque.sbdcwww.twitter.com/AlbuquerqueSbdcwww.pinterest.com/albuquerquesbdc

CNM Small Business Development Center: Whether you already own a small business or are thinking about becoming an entrepreneur, the Small Business Development Center (SBDC) at Central New Mexico Community College (CNM) can help you climb the ladder of success. The SBDC offers NO-COST management consulting, LOW-COST training courses, and government procurement assistance for central New Mexico businesses.

Funded in part through a cooperative agreement with the U.S. Small Business Administration (SBA). Cooperative Agreement No. SBSHQ-15-B-0049. All opinions, conclusions or recommendations expressed are those of the author (s) and do not necessarily reflect the view of the SBA. Reasonable accommo-dations for persons with disabilities will be made if requested at least two weeks in advance. Contact the Albuquerque SBDC at CNM Workforce Training Center, 5600 Eagle Rock Avenue NE, Albuquerque, NM 87113, 505 224-5250.

Building New Mexico’s Economy One Business at a Time.For information on NMSBDC and its 20 service centers, visit www.nmsbdc.org

The CNM SBDC also hosts a PTAP Advisor for the NMSBDC/Procurement Technical Assistance Program (PTAP). Lenny Bean will be able to assist anyone with governmental contracts, bid preparation, requests for proposals, governmental marketing strategies, and more. Contact Lenny via (505) 224-5966 http://www.nmptap.org/

The SBDC Center at CNM is part of the New Mexico Small Business Development Center Network (NMSBDC). To find more information on the NMSBDC and its 19 service centers, visit http://www.nmsbdc.org


COACHING PROGRAMSLearn to coach others through these nationally-recognized training programs.

FINANCIALLearn to coach others on financial literacy topics through a dynamic, interactive coaching training that combines fundamental coaching skills with strong financial content. Topics include cash flow management, the COACH model, debt alleviation, values clarification, credit and debt ratios, Coaching skills and strategies, and estate planning. Participants get immediate practice and feedback on their financial coaching skills. The five day course, divided into two parts, is highly interactive with coaching practice during the training and between the two training sessions. The intention of the course is for participants to leave with knowledge and tools that they will be able to easily integrate into their day-today work life.

COLLEGE SUCCESSCNM’s College Coaching training is a dynamic, interactive coaching training that combines fundamental coaching skills with strong college access and success content created specifically for professionals who work with students and families in Middle and High Schools, Adult Basic Education programs, Community Colleges and Universities, and Community-Based Organizations. Our nationally renowned trainers help participants create a solid understanding of how they can use coaching skills and tools to help students and families take actionable steps, particularly on the financial side, to improve the probability that a child will enroll in, and succeed at, college. Topics include enhanced listening skills, visioning college success, creating a college going culture, developmental level appropriate supports, coaching skills and financing college.

LEADERSHIP The Leader as Coach training challenges leaders to have the influence they need to achieve complex organizational goals. Through greater self-awareness of leadership, strengths, values, patterns of high performance, communication style and how they create more effective conversations with stakeholders, team members, vendors, etc. leaders will gain an understanding of how to make their vision for the organization a reality. Leaders will learn a straightforward coaching model and coaching skills to implement in the workplace immediately. Additionally, the course covers: when is the right time to coach, delegation, powerful feedback, multiple perspectives, expectations and tools for goal planning. At the completion of the course, leaders will walk away with a Leadership Effective Plan to implement key learning from the experience.

COURSES OFFERED NATIONWIDE. PLEASE CONTACT US FOR DATES AND ADDITIONAL PROGRAM DETAILS.

CNM is an approved training provider for the Board Certified Coach Credential by the Center for Credentialing and Education.

Courses offered nationwide. Please contact us for dates and additional program details.

[email protected] | 505.224.5210 | 1.855.266.6369


GET CERTIFIED! Industry Testing & Certification

A wide range of Industry Testing is available at CNM Workforce Training Center

• ACT WorkKeys - Skills Assessment and National Career Readiness Certificate

• Commercial Driver License Skills Exam (CDL)

• EPA 608 of the Clean Air Act (EPA)

• Industry Competency Exam (ICE)

• Law School Admission Test (LSAT)

• Multistate Professional Responsibility Examination (MPRE)

• National Registry of Emergency Medical Technicians Practical Exam (NREMT)*

• NMNEC Health Education Systems Incorporated Admissions Assessment (HESI A2)

• NM Nurse Aid Competency Evaluation Exam (CNA)

• NM Pesticide Licensing Exam

• North American Board of Certified Energy Practitioners (NABCEP), Photovoltaic and Solar Heating Entry Level Exam

NOW OFFERING

We also offer Professional High Stakes Testing through Castle Worldwide, Comira, Performance Assessment Network (PAN), and Pearson Vue including industry certification exams for organizations such as the American Culinary Federation (ACF), Board of Chiropractic Examiners (BCE), Environmental Protection Agency (EPA), Association of Energy Engineers (AEE), and many more.

* THE CY STOCKHOFF MEMORIAL SCHOLARSHIP AT CENTRAL NEW MEXICO COMMUNITY COLLEGE BENEFITS EMS STUDENTS TAKING THE NATIONAL REGISTRY OF EMTS PRACTICAL EXAMINATION (NREMT).

TO MAKE A TAX-DEDUCTIBLE CONTRIBUTION:

• Donate online at www.cnm.edu/donate

• Mail your gift to: CNM Foundation 525 Buena Vista Dr. SE Albuquerque, NM 87106 Memo line: Cy Stockhoff

CONTACT For additional information please contact [email protected] or call (505) 224-5200.

Workforce Training Center


BUSINESS & COMPUTERS• Microsoft Office Suite:

All Levels, All Applications, 2010 or 2013 Versions

• Customer Service• Keirsey Temperament Sorter• Employability Skills• Diversity• Social Media Marketing• Business/Technical Writing• Spanish in the Workplace• Quality Improvement (Lean/Six

Sigma)• Leadership Coaching• Improv for improved performance• Customized Audit Training• Food Safety/ServSafe Certification• Specialized training for food service

providers• Business Etiquette Dinner• Collaboration and Communication by

Candlelight Dinner• Data Analysis

ENERGY & ENVIRONMENT• Energy Efficiency• Weatherization Technician• Sustainable Business• Green Project Management• Greening Health Care Operations• Solar Thermal/Heating

• Sustainability

EDUCATION• 45 Hour Childcare

State Certification• Professional Development

for Teachers

• Train the Trainer

HEALTH & EMS• AHA CPR• AHA First Aid• Wilderness First Aid• AHA Advanced Cardiac

Life Support• AHA Pediatric Advanced

Life Support• Clinical Counseling

& Social Worker CEUs• Eldercare /Home Health• Food Safety/Serv Safe Certification• Emergency Medical Services• EMS First Responder• EMS Out of State Transition• Paramedic Refresher• Firefighter Training• Wildland Fire Training • Nursing CEUs• Phlebotomy• Healthcare Simulation• Clinical Compliance• Medical Coding/ICD-10

TECHNICAL TRADES• Soldering/IPC• Construction Trades• Backflow• Blueprint Reading• Code & Safety• Machine Tool• Water & Wastewater Technician

TRUCK DRIVING• CDL Class A, B, or C• Trailer Safety & Driving

SAFETY & OSHA• Incident Command• OSHA 30• Hazwoper 40, 24, or 8• Hazard Communication• Lockout/Tagout• Bloodborne Pathogens• Personal Protection Equipment

CUSTOMIZED TRAININGCNM Workforce Training Center has the expertise to provide customized and on-demand training programs in a wide variety of areas. In addition to our currently scheduled programs, we can provide innovative, high-quality training in these areas:

Discover how we can provide flexible, cost-effective training solutions to meet the needs of your business. To learn more, contact one of our Business Account Representatives today!

• Mark Pyszkowski: [email protected] / 505.224.5227

• Cynthia Molnar: [email protected] / 505.224.5228

www.cnm.edu/wtc


Principles of Manufacturing

Cost is $350 (Small size companies may qualify for funding)

How can you improve your process to give you a competitive advantage? New Mexico MEP guides participants as they utilize concepts to convert a convoluted job shop

environment into one that is responsive to each customer’s specific requirements while improving on-time delivery, quality and showing significant improvement to profit margin.

This event has broad application to people in any industry and role; operations and administrative personnel, hourly associates to the CEO, all can benefit from attending this event. The team will move to the factory floor where the learned concepts will be

applied to a simulated manufacturing floor. This class is provided as a joint partnership between NM MEP and CNM (8 hrs.)

Benefits of Lean Manufacturing• Reduce work in process

• Promote quality improvement

• Maximize floor space utilization

• Improve flow of materials

• Increase production capacity

• Encourage employee teamwork

• Increase customer satisfaction

• Improve on-time shipments

* Any for-profit small business wishing to participate in the NM MEP Lean Concepts Training may utilize funding through the New Mexico Small Business Assistance Program with Sandia

National Laboratories. Please call (505) 262-0921.


WE PROVIDE• CLASSROOMS

• COMPUTER LABS

• CONFERENCE ROOMS

• AUDIO/VISUAL EQUIPMENT

• COMPUTER EQUIPMENT

• SMART INTERACTIVE WHITEBOARDS

• WIFI & GUEST ACCOUNTS

• TECHNICAL SUPPORT

• CUSTODIAL SERVICE

• FURNISHINGS & SET UP

• PODIUM STAGE

• PIPE & DRAPE BACKDROP

NEIGHBORHOOD SERVICES• CATERING, RESTAURANTS

• HOTELS, RECREATION

LOCATION & PARKING• CONVENIENT LOCATIONS

• EASE OF ACCESS

ROOMS AT CNM WORKFORCE TRAINING CENTER ARE:

• Technologically enhanced featuring projectors, sound, document cameras and DVD playback capabilities in a large screen presentation or classroom environment.

• An interactive SMART panel is available for those instructors who want to incorporate this technology into the course curriculum.

• WTC also has Polycom audio and/or video conference capability, as well as other options for software-based conferencing.

• Designed to be user friendly, facilitators are welcome to connect a personal laptop or other device to project presentations from that source.

• Wireless presentation (AirMedia) and wireless network (WiFi) is accessible in all rooms.

• Classrooms come standard with white boards and huddle boards to give facilitators a variety of instructional tools.

VENUE RENTAL SERVICESCentral New Mexico Community College provides rooms on a space available basis for a fee. We can provide top quality rooms of varied sizes, state of the art audio, visual and computer technology, and technical support for meetings, conferences, seminars and special events.

• CNM Workforce Training Center

• Visit us at www.cnm.edu/wtc for rate information.

• Contact [email protected] to check for availability.

www.cnm.edu/wtc

CNM In enuity, Inc.


stemuluscenter.org

FAST TRACK BUSINESS DEGREEReceive an Associate’s Degree in 15 Months!

The STEMulus Center has partnered with CNM’s School of Business and Information Technology to offer this Fast Track Associate’s Degree in Business Administration. Classes in this program are offered in 7-week blocks. Through the Competency Based Education model (CBE), students leave the program ready to implement their new skills sets at work.

• Classes take place in the evening (maximum two nights per week) and online.• Students receive a personal laptop that becomes their property.• Students receive digital textbooks to load onto their laptops.• Dinner is served to students on class nights, as a perk!

Visit stemuluscenter.org/products/ftba or contact Andrés Armijo at [email protected].

Fast Track Business Degree

ARE YOU READY TO EARN YOUR LIBERAL ARTS DEGREE ONLINE IN 16 MONTHS?!

WHY SHOULD YOU GET A DEGREE IN LIBERAL ARTS? Liberal Arts is the degree to learn about everything so you can be anything! Students who have a degree in liberal arts develop valuable workplace skills including: effective oral and written communication, critical thinking and analytical reasoning, the ability to make connections across diverse bodies of knowledge, and the ability to apply knowledge and skills to real-world settings.

NO COMMUTE. NO PARKING. FLEXIBLE SCHEDULING.GO ON TO FINISH YOUR BACHELOR’S DEGREE WITHOUT EVER STEPPING FOOT ON A CAMPUS!After completing your online program at CNM, transfer directly to Western New Mexico University’s (online) Interdisciplinary Bachelor’s Degree Program!

FOR ADDITIONAL INFORMATION PLEASE VISIT cnm.edu/onlineliberalartsdegree or call 505-224-3588 and apply today!

stemuluscenter.org

FAST TRACK BUSINESS DEGREEReceive an Associate’s Degree in 15 Months!

The STEMulus Center has partnered with CNM’s School of Business and Information Technology to offer this Fast Track Associate’s Degree in Business Administration. Classes in this program are offered in 7-week blocks. Through the Competency Based Education model (CBE), students leave the program ready to implement their new skills sets at work.

• Classes take place in the evening (maximum two nights per week) and online.• Students receive a personal laptop that becomes their property.• Students receive digital textbooks to load onto their laptops.• Dinner is served to students on class nights, as a perk!

Visit stemuluscenter.org/products/ftba or contact Andrés Armijo at [email protected].

Fast Track Business Degree

ARE YOU READY TO EARN YOUR LIBERAL ARTS DEGREE ONLINE IN 16 MONTHS?!

WHY SHOULD YOU GET A DEGREE IN LIBERAL ARTS? Liberal Arts is the degree to learn about everything so you can be anything! Students who have a degree in liberal arts develop valuable workplace skills including: effective oral and written communication, critical thinking and analytical reasoning, the ability to make connections across diverse bodies of knowledge, and the ability to apply knowledge and skills to real-world settings.

NO COMMUTE. NO PARKING. FLEXIBLE SCHEDULING.GO ON TO FINISH YOUR BACHELOR’S DEGREE WITHOUT EVER STEPPING FOOT ON A CAMPUS!After completing your online program at CNM, transfer directly to Western New Mexico University’s (online) Interdisciplinary Bachelor’s Degree Program!

FOR ADDITIONAL INFORMATION PLEASE VISIT cnm.edu/onlineliberalartsdegree or call 505-224-3588 and apply today!


Hours and HolidaysWTC Hours of Operation: M-F 7:00am -10:00pm, Saturday 8:00am - 5:00pm STEMulus Center Hours of Operation: 8:00am - 5:00pmLocations are closed in the observance of the following: Labor Day, September 7, 2015Thanksgiving, November 26 & 27, 2015Winter Break, December 21, 2015 through January 1, 2016 Martin Luther King Day, January 18, 2016

AccessibilityCNM is committed to making classes accessible. If you require specialservices or accommodations for a course or exam offered at WTC or the STEMulus Center please contact us in advance. If we are not able to accommodate your accessibility needs, we will refund your payment. The CNM Disability Resource Center also assists students with documented physical, mental, learning and visual, speech and hearing disabilities. For questions about accessibility and special services at CNM please call (505) 224-3259 or email [email protected].

ParkingParking is free parking at CNM Workforce Training Center. Contact us for parking requirements at other locations.

Waiting ListIf the course you select is full, you can request to be placed on a waitinglist. You will not pay for the course until you receive notice thata seat is available to you.

Refund PolicyWe will provide a full refund so long as your withdrawal cancellation isreceived at least 2-business days before the class starts unless otherwisestated for special events. CDL Skills Exams require a 3 business dayadvance notice. No refunds will be authorized once a class or examhas started. Refunds are processed according to the form of paymentreceived (check or credit card).

Cancellations & TransfersIf we have to cancel a class due to low enrollment, we will notify youat least two business days before the class is scheduled to start. If wehave to cancel your class, you can request a full refund of your tuition ortransfer to another course of your choice within 3 business days, spacepermitting. Per CNM policy, if you pay with a check or money order youmust provide your Social Security Number to obtain a refund.

WithdrawalsIf you need to withdraw from a class you must notify us at least 2-businessdays before the class starts to receive a credit or refund of thecourse fee. CDL Skills Exams require a 3 business day advance notice.No refunds will be made once a class or exam has started. Please see therefund policy above.

Inclement WeatherFor announcements of school closings due to inclement weather, pleasecheck our website at www.cnm.edu/weather or call 505-224-4SNO (4766).CNM will issue refunds for classes that have been postponed due to inclement weather or other circumstances beyond our control however wewill make every effort to reschedule such classes and/or exams.

Funding ResourcesNon-credit programs are not eligible for CNM Financial Aid. There are other funding sources that may be available to qualified participants. Learn more about these workforce funding programs and how to qualify by visiting our website at www.cnm.edu/wtc and click on Funding Resources.• Trade Adjustment Assistance: The Trade Adjustment Assistance (TAA) program was created to assist workers dislocated due to foreign imports or the transfer of production to Mexico or Canada. The program offers great benefits including money for retraining, and reimbursement of job search and relocation expenses.• Workforce Investment Act: The Workforce Investment Act (WIA) is for those who are unemployed or laid off. WIA funding provides training funds for jobs in demand.

• Division of Vocational Rehabilitation: The Division of Vocational Rehabilitation (DVR) provides assistance for those who have an impairment which “constitutes a substantial impediment to employment.”• VA Education Benefits – VA Benefits may be eligible for approved programs. Please call 224-5200 or e-mail [email protected] for a list of approved programs.• W.K. Kellogg Access Funds: Access Funds may be available to eligible residents of Bernalillo County for the Deep Dive Coding Bootcamp and Cyber Academy until October 2017.

ScholarshipsScholarships may be available for select courses through the BosomworthWorkforce Scholarship Endowment or McCorkle Workforce Training Center Endowment. Doug and Joan Bosomworth established and funded an endowment which provides scholarships to working individuals who have a sincere desire to improve their workplace capabilities and earning power. Cathy and Sherman McCorkle established and funded an endowment which provides scholarship to students seeking non-credit skill development or workforce training opportunities. For information please email [email protected] or call 505-224-5200.

GradingOur grading system is Complete or Incomplete for most classes/programs and completion is given when the student attends at least 75% of the course or total program hours. The following programs have classes that receive numeric grades (70% and above = Pass / under 70%= Incomplete): Deep Dive Coding Bootcamp, Cyber Academy, PV Academy, and Electronic Soldering Academy

Prior Learning AssessmentNon-credit programs and credentials completed at WTC or the STEMulus Center may transfer toward the completion of a certificate or degree program at CNM. More information is available at www.cnm.edu/student-resources/transfer/. Credentials earned at other postsecondary institutions, training centers or through military experience may be applied toward program requirements for non-credit programs. Requests should be made to the WTC Program Director at [email protected]

TranscriptsTranscripts of course history and grades are accessible by logging in to our registration system at cnm.edu/wtc. Click Login on right.

DiscountsReceive a 10% discount when:• You register and pay for 4 classes or more with a single payment• An employer sends 4 individuals to a course with a single payment• You are over the age of 65. • You are a CNM employee according to your customer profile. Restrictions include:• Exams are not eligible for discounts.• Discounts applied only at time of registration with single payment.• Ed2go and Pearson online courses do not qualify for Senior or CNM Employee discounts.• Discounts are not transferable.• A “Course Series” counts as one class and is already discounted. Senior or CNM Employee Discounts do not apply to Course Series discounts.• Discounts are subject to change without notice.

Gift CertificateseGift cards can be purchased at any time at www.cnm.edu/wtc. Simplyclick on the Buy eGift Card icon at the top of the home page and follow the steps.

No refunds allowed, no expiration date and a minimum purchase of $10 is required. Gift the gift of learning

General Information

CNM Workforce Training Center is located at 5600 Eagle Rock Ave. NE in Albuquerque, NM. See page 50 for a map.


Participant Name (Last) _________________________________________ (First) _________________________________ Date of Birth ___________

Home Address ________________________________________________

City ___________________________ State ______ ZIP _______________

Phone (Day) __________________________________________________

Phone (Alternate) ______________________________________________

E-mail ________________________________________________________

Course Information

CLASS OR SERIES TITLE START DATE FULL COST DISCOUNT FINAL COST (if any)

TOTAL DUE

Note: Payment MUST be included with registration.

Payment Method (Registration is not complete without payment.)

Check/Money Order, payable to CNM Ingenuity

3rd Party Payment (purchase order, purchase requisition or voucher)

To pay by credit card register online at www.cnm.edu/wtc.

ONLINEwww.cnm.edu/wtc

24 hours/7days

FAX(505) 224-5205

E-MAILScan and send to [email protected]

IN-PERSONMon–Fri, 8 a.m. to 5 p.m.

Visit the WTC office at 5600 Eagle Rock Ave. NE, in Albuquerque, NM.

MAILCNM Workforce Training Center (WTC)Attn: REGISTRATION5600 Eagle Rock Ave. NEAlbuquerque, NM 87113-1711

Five Ways to Register

REGISTRATION FORM

Employer or Business Name (mandatory for all 3rd party payments)

Organization Name ____________________________________________

Business Address ______________________________________________

City ___________________________ State ______ ZIP ______________

Contact Name _________________________________________________

Contact E-mail ________________________________________________

Contact Phone ________________________________________________

WITHDRAW DEADLINE:

Two business days before the class start date.

See page 39.

Questions? (505) 224-5200 / M–F 8am–5pm


in Albuquerque and Rio Rancho

CNM ADVANCED TECHNOLOGY

CENTER

CNM STEMULUSCENTER

Jefferson St

Jeff

erso

n St

2nd

St

Workforce Training Center5600 Eagle Rock Ave. NEAlbuquerque, NM 87113

CNM STEMulus Center20 First Plaza Center NWAlbuquerque, NM 87102


Pearson Workforce Education Self-Paced Courses for Higher Education In 2011, 14 million Americans were unemployed, but 53% of employers faced a significant challenge in recruiting qualified workers.

Clients told us about the challenges they faced trying to re-tool their skills to secure a new position or advance their career. To address those challenges, Pearson Workforce Education is proud to offer self-paced courses that are both flexible and affordable.

Pearson Workforce Education offers courses that help clients enter (or re-enter) the job market, grow professionally, sit for a variety of national certification exams, and ultimately get started toward securing a new position!

PROGRAM HIGHLIGHTS:

• Pearson Workforce Education self–paced online courses are flexible and convenient. Self-paced courses offer clients the ability to learn at their own pace, and at a time that is most conducive to their schedule.

• Courses are aligned to many certifications, such as CompTIA, Project Management Institution, National Association of Healthcare Access Management, and more!

• Pearson Workforce Education tracks student progress and outcomes through our robust Learning Management System and delivers this data to the Workforce Development Agency.

• Pearson Workforce Education was named one of the Top Workforce Development Providers for 2012 by TrainingIndustry.com.

To learn more about our self-paced workforce education courses, visit our website: www.pearsonworkforceeducation.com.

To quality programs in workforce education

Non-ProfitOrganizationU.S. Postage

PAIDAlbuquerque, NM

Permit No. 61

cnm.edu/wtc | stemuluscenter.org

Professional & Personal EducationCentral New Mexico Community College

Inside: 2015 / 2016 Programs

Deep Dive Coding Bootcamp 14 Electronic Soldering 36 Supervisor Academy 8

Personal growth | Workforce training | Contract training

5600 Eagle Rock Ave. NEAlbuquerque, NM 87113

Documents

Central New Mexico Community College Professional & Personal · PDF fileprovide you with the core competencies you need to advance in the workplace ... Entrepreneurial Programs 19