CBM3 BUGGY4TH WHEEL FITTING INSTRUCTIONS

1300 650 059 | concoursegolf.comVersion 1.2

THANK YOU FOR YOUR PURCHASE OF THE CBM3 4TH WHEELWe recommend you familiarise yourself with these instructions and follow the steps outlined to ensure your 4th wheel is secured properly and functions the way it is intended.

STEP 1

Before fitting the 4th wheel remove your CBM3 Buggy from your bag. Unfold the buggy and place on a stable work bench (or table) with the underside facing upwards as shown.

Take the Mounting Block and align it with the middle of the main frame of the CBM3 as indicated. You will see two nuts that attach the buggy legs to the main frame to help locate the correct position.

Place the Mounting Block in this position. It should slot in place easily with the sides of the Mounting Block covering the buggy leg nuts as indicated.

FITTING INSTRUCTIONS

Enclosed in your package you should find the following:-

- Wheel and arm that attaches to your CBM3

- Mounting Block which needs to be attached to the underside of the CBM3

- Metal Securing Straps for the Mounting Block

- Allen Key

- Securing screws, nuts and washers

FITTING THE MOUNTING BLOCK

1300 650 059 | concoursegolf.com Version 1.2

CONTENTS:2 X screws (long & medium)2 X hexagonal nuts2 X flat washer2 X spring washer4 X small screws (Allen Key head)1 X Allen Key

MOUNTING BLOCK COVERS BUGGY LEG NUTS

TOP

MOUNT HERE

SECURING THE MOUNTING BLOCK

STEP 2

Now take a Metal Securing Strap and place it around the top of the Mounting Block and main frame. You will see two points where screws secure the Metal Securing Strap with the Mounting Block.

Take two of the small screws and the Allen Key and attach the strap to the Mounting Block.

Repeat this step with the 2nd Metal Securing Strap at the bottom of the Mounting Block so it will be secured top and bottom.

Once each of the Metal Securing Straps are in position tighten each of the 4 screws so they are firmly held.

1300 650 059 | concoursegolf.com Version 1.2

SECURING TO THE MAIN FRAME

STEP 3

Turn your CBM3 over so you can see the ends of the Metal Securing Straps.

Take the longer threaded screw to secure the top Metal Securing Strap.

Using the flat washer, then spring washer in front of the hexagonal nut, secure the strap as indicated. Ensure both washers are on the side of the hexagonal nut so it does not loosen when tightened.

Now repeat this process with the 2nd Metal Securing Strap at the bottom using the medium length threaded screw.

Once both are in place, ensure they are tightened firmly and both flat and spring washers are between the end of the Metal Straps and hexagonal nut.

The straps should grip the main frame tighly so there is no movement.

Now that the Mounting Block is secured, fold down the buggy frame and re-attach to your golf bag with the buggy still folded flat (closed position).

1300 650 059 | concoursegolf.com Version 1.2

SHORTER SCREWAT BOTTOM

LONGER SCREWAT TOP

WASHER SEQUENCE

ATTACHING / REMOVING THE 4TH WHEEL

Note: When preparing to play, we recommend that you attach the 4th wheel as the last step in setting up before use. When stowing the buggy after use, we recommend you remove the 4th wheel as the very first step before removing all other wheels and folding the buggy flat.

STEP 4

Ensure your bag is properly attached to the buggy, then unfold the buggy so the handle locks in place and buggy legs are extended exposing the Mounting Block.

Before attaching the 4th wheel, fit the front and side wheels of the buggy.

Now take the 4th wheel and ensure the lever is in the open position as shown.

Postion the 4th wheel in place with the Mounting Block ensuring the lever faces upwards as shown (at the top of the block).

It is important when doing this that the edge (tooth) of the 4th wheel’s mount slips underneath the edge of the Mounting Block before the lever is locked.

Once flush with the Mounting Block and pushed upwards so the leading edge of the mount is tucked underneath, turn the fastening lever to secure the 4th wheel in position.

You are now ready to play.

To remove the 4th wheel when it is not required, first open the lever to release the wheel from gripping the mount. Before you pull at the 4th wheel, slide it down to release the edge (tooth) from the Mounting Block (see inset).

Once the 4th wheel is detached, you can proceed with removing the side and front wheels then stowing the buggy flat.

If you require any assitance fitting or removing your 4th wheel please contact our customer service team on 1300 650 059.

1300 650 059 | concoursegolf.com Version 1.2

EDGE (TOOTH)

SLIDE UP TO LOCK SLIDE DOWN TO UNLOCK

LOCKED

OPEN

1300 650 059 | concoursegolf.com Version 1.2

For customer support or product enquiries, please contact Concourse Golf.

1300 650 059concoursegolf.cominfo@concoursegolf.com