Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
CBM3INSTRUCTION
MANUALSTRAPLESS BAG
CONNECTION
The strapless bag connectors allow you to attach your CBM3 buggy simply and securely without the need for straps. The kit contains: Hook, foot and insert. (fig 45).
Slide insert into foot as indicated. (fig 45).
Fit the hook to the rear rim of your bag by sliding it on firmly, ensuring it is located centrally. (figs 46 & 47).
Strapless bag connection.For Concourse bags.
Fig. 45 Strapless bag connection parts
Fig. 48 Insert and foot Fig. 49 Insert in place
Fig. 46 Fitting hook Fig. 47 Hook in place
Foot
Hook
Insert
Locate the locking pins on the base of the buggy (fig 50). Slide the foot onto the pins until it clicks into place firmly (fig 51).
Looking at the base of the bag, you’ll see a special insert hub. This is where the insert on the foot of your CBM3 will fit, ensuring a perfect fit between bag and buggy (fig 52).
With the CBM3 in an upright position, place the bag onto the foot so that the insert fits into the hub on the base of the bag (fig 53).
Fig. 50 Foot locking pins
Fig. 53 Placing bag onto foot
Fig. 52 Insert hub on base of bag
Fig. 51 Foot secured in place
Locking pins
Insert hub
With the locking lever in the open position (fig 54) apply pressure to buggy towards the bag, and the locking lever will automatically begin to lock. Then push down on lever to lock fully (fig 55).
Your buggy is fitted and ready to unfold (fig 56).
Fig. 54 Locking lever open Fig. 55 Buggy secured to hook
Fig. 56 Buggy fitted to bag
Locking lever
Locking lever
Apply pressure
Fig. 57 Release locking lever
Fig. 59 Place bag on foot
Fig. 58 Separate buggy from bag
Fig. 60 Refitting to bag
Locking lever
Separating from your bag.Unlock the mobiliser by lifting up the locking lever near the hook (fig 57). Hold the buggy in a stable upright position and push the top of your golf bag away from the buggy (fig 58).To refit the buggy to the bag, simply place bag back onto the foot (fig 59) and then bring the mobiliser up to meet the hook and push down on the mobiliser locking lever (fig 60).
The strapless bag connectors allow you to attach your CBM3 buggy simply and securely without the need for straps. The kit contains: Hook, foot and base plate. (fig 61).
Fit base plate and foot together as shown (fig 65).
Fit the hook to the rear rim of your bag by sliding it on firmly, ensuring it is located centrally. (figs 62 & 63).
Strapless bag connection.For non-Concourse bags.
Fig. 61 Strapless bag connection parts
Fig. 64 Base plate Fig. 65 Base plate and foot together
Fig. 62 Fitting hook Fig. 63 Hook in place
Foot
Hook
Base plate
Turn bag upside down, and position base plate and foot to the rear of your bag base, ensuring the foot is snug against the base rim. (fig 66).
Mark the position of the base plate on the base of your bag, before securing in place with double sided tape (fig 67).
For remaining steps, refer to figures 50 to 56 on the previous pages.
Fig. 66 Base plate and foot positioned correctly
Fig. 67 Base plate secured with double sided tape
To see the CBM3 in action visit concoursegolf.com