Upload
mkti-telecom-e-domotica-lda
View
212
Download
0
Embed Size (px)
DESCRIPTION
Disano Postes
Citation preview
434
2650
2200
2000
1500
1000
350
300
115
ø60
190
1000 Ø60 acc.501500 Ø60 acc.502000 Ø60 acc.50 2502500 Ø60 3003000 Ø60 3503500 Ø60 4004000 Ø60 450
3600 Ø60/120 4004600 Ø60/137 5005600 Ø60/154 600
1300 2502500 3503500 4503900 500
Fibreglasspoles
Fibreglass poles have a round orcone-shapedcross-section(dimen-sionsdependonmechanicalrequi-rements).Compared with aluminium or steelpolestheyofferthefollowingadvan-tages:-lighterweight-lessmaintenance-surfacesarenotattackedbycor-rosiveagents-electricallyinsulated- less dangerous when impactoccurs-extremelyflexibleinthewind.Certificated poles: These polesare recommended for small-sizeluminaires (decorative factor), inprivate areas, (anti-vandalismfactor).They can be installed bothon a base or buried according tomeasurements.
acc 5 pole ø 60ha.800 hu.200 w/owindow 991903ha.1250 hu.250 w/owindow 991904ha.1750 hu.250 w/owindow 991905ha.2200 hu.300 w/owindow 991906ha.2650 hu.350 w/owindow 991907
Cone-shapedfibreglasspole,black,corrosionresistant,mechanicalhigh-resistanceandUVstabilized.
acc. 50 base for acc 5black 991216
In f.g. nylon; supplied with buryinganchor.Forusewithpolesmax1900high.ConnectionØ60.
Fibreglass poles:table of general features
h pole diam. Ø recommended recomended on base sinking h. mn
435
ø60
B
A
C30
0
ø50
194
583/
683/
783
ø 60
ø60
B
A
C
ø50
300
ø 60
Fibreglasscone-shapedpoles
acc 1284 cone-shaped pole with windowø60-120 ha.3200 hu.400 window(50x194) 428610ø60-137 ha.4100 hu.500 window(50x194) 428611ø60-154 ha.5000 hu.600 window(50x194) 428612
Cone-shaped pole in f.g., black, corrosion-proof, high mechanical resistance andUV-stabilised.Completewithinspectionwindow,fuseandterminalblockcover.
acc 1278 cone-shaped pole without windowø60-120 ha.3200 hu.400 w/owindow 428617ø60-137 ha.4100 hu.500 w/owindow 428618ø60-154 ha.5000 hu.600 w/owindow 428619
Cone-shaped pole in f.g., black, corrosion-proof, high mechanical resistance andUV-stabilised.
POLE
S
436
ø30
1030
444
ø 170
211
ø 60
ø 211
40
1000
/150
0
ø 30
444
444
1600
/210
0
ø 30
ø 214
190
ø 120
ø 121
188
ø 100
230
ø 180
ø 60
700
ø 60
652
ø 72
85
200
ø 60
85
445
ø 60
400
62
75
acc. 1373 curved armblack 426905s. silver 426920Tropicalised steel. Attach to acces-sories 1364/1365 and pole acc. 1408/1409. acc. 1362 upward arm
1000 black 426901
1500 black 426902
1000 sil. 4269061500 sil. 426907
To be attached to acc. 1364/5
acc. 1363 downward arm1600 black 4269112210 black 4269121600 sil. 4269162100 sil. 426917To be attached to acc. 1364/5 and to pole 1408/9.
acc. 1364 Coronablack 426981s. silver 426988Made of die-cast aluminium. Equipped with terminal block
acc. 1365 Corona flangeblack 426982s. silver 426989Made of die-cast aluminium. With 6 arm-stop devices to reinforce the assembly.
acc. 327 arms. silver 426942graphite 426943
Die-cast aluminium. To be used with acc. 302 for wall mounting or 300/211 for the pole.
acc. 328 arms. silver 426944graphite 426945
Die-cast aluminium. To be used with acc. 302 for wall mounting, or acc. 300/211 for pole.
acc. 301 arm Olivas. silver 426972graphite 426973
Made of aluminium. To be used with acc.300/303/304/309 and 304 for pole or with acc 302/303/304/309 wall mounting..
acc. 300 Oliva connections. silver 426970graphite 426971
In aluminium. For installation on ø60 pole of the arms acc. 210.
acc. 217 connector adapters. silver 426962graphite 426963
Use with acc. 211 for installation on ø100 poles.
acc. 210 Sector arms. silver 426950graphite 426951
Made of aluminium. To be used with acc. 211 for pole mounting.
acc. 367 cover for polesox. black 426995ox. nat. 426998graphite 426997
Made of aluminium. To be used when a particular aesthetic finish is desired.
acc. 211 Sector connections. silver 426952graphite 426953
Made of aluminium. To be used with acc. 210 for pole mounting ø100 use acc. 217.
NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI UNI 40/6 standard. An accurate and suitable protection or insulation of the surfaces involved is recommended to avoid any direct contact with the new mason-ry or concrete screed.
acc. 299 log bolt991396
Log bolts are to be always bought with the pole 1408.
Scored pole ø 100
Fluted pole made of extruded aluminium, anodised by 15/20µ thick tin salt electrocoating; black, graphite or natural oxidised colour.With die-cast inspection window (191x55 mm), protective fuse holder, 10A fuse, 4-pole/3-way removable terminal block = 6 sqmm, 4 sqmm connec-tion. With hole for insertion of power supply cable. Die-cast aluminium adapter, Ø60 mm.The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II.When using Insulation Class I fixtures, appropriate grounding connections should be included in the system.
43731
00-4
100-
5000
500-
600-
800
191
ø60
ø100
1100
250
130
Cava60x35 r17.5
L’ENERGIA CHE TI ASCOLTA.
L’ENERGIA CHE TI ASCOLTA.
3100
-410
0-50
00
191
ø60
ø100
1100
295
ø20
250
800 40
0
400
800
40m
m
Inspection window with easily removable
terminal block for quick connection.
The dimension of the plinth depends on the type of post, the composition, the ground and material.
acc 1409 scored pole Ø 100h a. 3100 h u. 500 oxy black 426340h a. 4100 h u. 600 oxy black 426341h a. 5000 h u. 800 oxy black 426342h a. 3100 h u. 500 oxy natural 426334h a. 4100 h u. 600 oxy natural 426335h a. 5000 h u. 800 oxy natural 426336h a. 3100 h u. 500 graphite 426327h a. 4100 h u. 600 graphite 426328h a. 5000 h u. 800 graphite 426329
Inspection window with easily removable
terminal block for quick connection.
Cement base dimensions (subject to soil variations) for underground sinking of the 4 log bolts of acc. 1408.
acc 1408 scored pole with base Ø 100h a. 3100 oxy black 426345h a. 4100 oxy black 426346h a. 5000 oxy black 426347h a. 3100 oxy natural 426337h a. 4100 oxy natural 426338h a. 5100 oxy natural 426339h a. 3100 graphite 426324h a. 4100 graphite 426325h a. 5000 graphite 426326Log bolt is to be bought separately acc. 299.
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.
POLE
S
Scored pole ø 100
PVC Tube
Pole
impermeable material
cement
sand
protection band
hole60x35 r17.5
to seal
438
230
ø 180
ø 60
652
ø 72
700
ø 60
ø 214
190
ø 120
ø 121
ø 430 170
ø 60
500
1029
ø60
1530
680
ø 60
1430
/193
0
680
680
1530
/203
0
ø 60
ø 240
22
4
ø 60
ø 300
40
ø 125
85
200
ø 60
85
445
ø 60
400
62
75
acc. 327 arms. silver 426942graphite 426943
Die-cast aluminium. To be used with 300/211 for the pole mounting.
acc. 222 base pole covers. silver 991378bla. 991380graphite 991381
Made of die-cast aluminium.To be used as base pole cover acc. 1493/1308/1508.
acc. 1465 Corona flangebla. 426985s. silver 426991graphite 427001
Made of die-cast aluminium. With 6 arm-stop devices to reinforce the assembly
acc. 1464 Coronabla. 426984s. silver 426990graphite 427000
Made of die-cast aluminium. For max 6 arms acc1462 or 1463. Equipped with terminal block.
acc. 1473 curved armbla. 426915s. silver 426921Tropicalised steel. Attach to acces-sories1464/1465 and to poles acc. 1508/1509.
acc. 1462 upward arm1430 bla. 4269031930 bla. 4269041430 sil. 4269081930 sil. 426909To be attached to acc. 1464/5 and to pole 1508/9.
acc. 1463 downward arm1530 bla. 4269132030 bla. 4269141530 sil. 4269182030 sil. 426919To be attached to acc. 1464/5 and to pole 1508/9.
acc. 129 curved armbla. 991328Tropicalised steel, black cationic electrocoating. Apply to acc.1464/1465 and to poles acc. 1508/1509.
acc. 328 arms. silver 426944graphite 426945
Die-cast aluminium. To be used with 300/211 for the pole mounting.
acc. 301 Oliva arms. silver 426972graphite 426973
Made of aluminium. To be used with acc.300/303/304/309 and 304 for pole or with acc 302/303/304/309 wall mounting
acc. 300 Oliva connections. silver 426970graphite 426971
In aluminium. For installation on ø60 pole of the arms acc. 210.
acc. 210 Sector arms. silver 426950graphite 426951
Made of aluminium. To be used with acc. 211 for pole mounting.
acc. 211 Sector connections. silver 426952graphite 426953
Made of aluminium. To be used with acc. 210 for pole mounting ø120.
acc. 299 log bolt991396
Log bolts are to be always used with the pole 1508.
Scored pole ø 120
NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI UNI 40/6 standard. An accurate and suitable protection or insulation of the surfaces involved is recommended to avoid any direct contact with the new mason-ry or concrete screed.
Fluted pole made of extruded aluminium, anodised by 15/20µ thick tin salt electrocoating; black, graphite or natural oxidised colour.With die-cast inspection window (191x55 mm), protective fuse holder, 10A fuse, 4-pole/3-way removable terminal block = 6 sqmm, 4 sqmm connec-tion. With hole for insertion of power supply cable. Die-cast aluminium adapter, Ø60 mm.The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II.When using Insulation Class I fixtures, appropriate grounding connections should be included in the system.
43931
00-4
100-
5000
-600
050
0-60
0-80
0
353
Cava60x35 r17.5
ø60
ø120
1100
250
130
L’ENERGIA CHE TI ASCOLTA.
L’ENERGIA CHE TI ASCOLTA.
3100
-410
0-50
00
353
ø60
ø120
1100
295
ø20
250
800 40
0
400
800
40m
m
Inspection window with easily removable
terminal block for quick connection.
The dimension of the plinth depends on the type of post, the composition, the ground and material.
Inspection window with easily removable
terminal block for quick connection.
Cement base dimensions (subject to soil variations) for underground sinking of the 4 log bolts of acc. 1508.
acc 1509 scored pole Ø 120h a. 3100 h u. 500 oxy black 426350h a. 4100 h u. 600 oxy black 426351h a. 5000 h u. 800 oxy black 426352h a. 6000 h u. 800 oxy black 426353h a. 3100 h u. 500 oxy natural 426374h a. 4100 h u. 600 oxy natural 426375h a. 5000 h u. 800 oxy natural 426376h a. 6000 h u. 800 oxy natural 426373h a. 3100 h u. 500 graphite 426366h a. 4100 h u. 600 graphite 426367h a. 5000 h u. 800 graphite 426368h a. 6000 h u. 800 graphite 426369Double fuse and standard knife switch available upon request.
acc 1508 scored pole with base Ø 120h a. 3100 oxy black 426355h a. 4100 oxy black 426356h a. 5000 oxy black 426357h a. 3100 oxy natural 426377h a. 4100 oxy natural 426378h a. 5000 oxy natural 426379h a. 3100 graphite 426362h a. 4100 graphite 426363h a. 5000 graphite 426364Double fuse and standard knife switch available upon request.Log bolt is to be bought separately acc. 299.
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.
POLE
S
Scored pole ø 120
PVC Tube
Pole
impermeable material
cement
sand
protection band
hole60x35 r17.5
to seal
440
ø 190
65
ø 120
700
ø 60
ø 214
190
ø 120
ø 65
92
85
200
ø 60
85
445
ø 60
67167
151
ø 60
500
1029
ø 60
1430
/193
0
680
680
1530
/203
0
ø 60
ø 121
ø 430 170
ø60
1530
680
400
62
75
acc. 211 Sector connect. s. silver 426952graphite 426953
Made of aluminium. To be used with acc. 210 for pole mounting ø120.
acc. 212 rings. silver 426954graphite 426955
Made of aluminium. To be used with acc. 214/215 for ø120 pole mounting.
acc. 210 Sector arms. silver 426950graphite 426951
Made of aluminium. To be used with acc. 211 for pole mounting.
acc. 328 arms. silver 426944graphite 426945 Die-cast aluminium. To be used with acc. 302 for wall mounting, or 300/211 for pole mounting.
acc. 305 end caps. silver 426979graphite 426980
To be used when no fixture is installed on acc 210 to improve appearance.
acc. 327 arms. silver 426942graphite 426943Die-cast aluminium. To be used with acc. 302 for wall mounting, or 300/211 for pole mounting.
acc. 151 Lione cubebla. 991356s. silver 991365
Made of die-cast aluminium. To be used when installing the products on poles Ø120.
acc. 129 curved armbla. 991328Tropicalised steel, black cationic electrocoating. Apply to acc.1464/1465 and to poles acc. 1308/1309.
acc. 153 arm attachmentbla. 991358s. silver 991359Made of die-cast aluminium. To be used with acc. 151 when installing curved arms on poles.
acc. 1462 upward arm1430 bla. 4269031930 bla. 4269041430 sil. 4269081930 sil. 426909To be attached to acc. 1464/5 and to pole 1308/9.
acc. 1463 downward arm1530 bla. 4269132030 bla. 4269141530 sil. 4269182030 sil. 426919To be attached to acc. 1464/5 and to pole 1308/9.
acc. 1473 curved armbla. 426915s. silver 426921Tropicalised steel. Attach to acc.1464/1465 and on poles acc. 1308/1309.
acc. 222 base pole coversil.sab. 991378bla. 991380graphite 991381Made of die-cast aluminium.To be used as base pole cover acc. 1493/1308/1508.
acc. 299 log bolt991396
Log bolts are to be always used with the pole 1308.
Scored pole “Lione” Ø 120
NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI UNI 40/6 standard. An accurate and suitable protection or insulation of the surfaces involved is recommended to avoid any direct contact with the new mason-ry or concrete screed.
Fluted pole made of extruded aluminium, anodised by 15/20µ thick tin salt electrocoating; black, graphite or natural oxidised colour.With die-cast inspection window (191x55 mm), protective fuse holder, 10A fuse, 4-pole/3-way removable terminal block = 6 sqmm, 4 sqmm connec-tion. With hole for insertion of power supply cable. Die-cast aluminium adapter, Ø60 mm.The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II.When using Insulation Class I fixtures, appropriate grounding connections should be included in the system.
44150
0080
0
353
Cava60x35 r17.5
ø120
130
1100
250
L’ENERGIA CHE TI ASCOLTA.
L’ENERGIA CHE TI ASCOLTA.
295
ø20
250
800 40
0
5000
353
ø120
1100
400
800
40m
m
acc 1309 scored pole “Lione” Ø 120h a. 5000 h u. 800 oxy black 426552h a. 5000 h u. 800 oxy natural 426576h a. 5000 h u. 800 graphite 426514Double fuse and standard knife switch available upon request.
acc 1308 scored pole “Lione” with baseh a. 5000 oxy black 426557h a. 5000 oxy natural 426579h a. 5000 graphite 426512Double fuse and standard knife switch available upon request.Log bolt is to be bought separately acc. 299.
Cement base dimensions (subject to soil variations) for underground sinking of the 4 log bolts of acc. 1308.
Inspection window with easily removable
terminal block for quick connection
The dimension of the plinth depends on the type of post, the composition, the ground and material.
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.
Inspection window with easily removable
terminal block for quick connection
POLE
S
Scored pole “Lione” Ø 120
PVC Tube
Pole
impermeable material
cement
sand
protection band
hole60x35 r17.5
to seal
442
700
ø 60
85
200
ø 60
85
445
ø 60
230
ø 180
ø 60
652
ø 72
3500
-450
0-55
0030
00-4
000-
5000
3940
- 4
940
- 58
4036
45-4
645-
5645
NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI standard 40/6.
Equipped with inspection window (293x94 mm), removable 4-pole termi-nal block, max. cross-section 16 sqmm. Supplied with 2 16A safety fuses. With hole for insertion of power supply cable; with holes at different heights according to use.The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps.Standard insulation class II.
acc. 210 Sector arms. silver 426950graphite 426951
Made of aluminium. To be used with acc. 300 for pole mounting.
acc. 328 arms. silver 426944graphite 426945Die-cast aluminium. To be used with acc. 302 for wall mounting or 300/211 for the pole.
acc. 327 arms. silver 426942graphite 426943Die-cast aluminium. To be used with acc. 302 for wall mounting or 300/211 for the pole.
acc. 301 Oliva arms. silver 426972graphite 426973
Made of aluminium. To be used with acc. 300/303/304/309 for the pole installation or with acc. 302/303/304/309 for the wall.
acc. 300 Oliva connect. s. silver 426970graphite 426971
In aluminium. For installation on ø60 pole of the arms acc. 210/301/327/328.
Cone-shaped poles
443
Inspection door with easily removable ter-minal board for quick connection.
Concrete base dimensions (subject to soil variations).
acc 1481 steel cone-shaped to be buried-with windowh a. 3000 h u. 500 silver 425150h a. 4000 h u. 500 silver 425151h a. 5000 h u. 500 silver 425152h a. 3000 h u. 500 graphite 425154h a. 4000 h u. 500 graphite 425155h a. 5000 h u. 500 graphite 425156
acc 1480 steel cone-shaped with base-with windowh a. 3000 silver 425050h a. 4000 silver 425051h a. 5000 silver 425052h a. 3000 graphite 425054h a. 4000 graphite 425055h a. 5000 graphite 425056
Concrete base dimensions (subject to soil variations).
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
30050
0
Cava 100X50
3000
-400
0-50
00
ø 60
1000
132
Inspection door with easily removable ter-minal board for quick connection.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
132
1000
3000
-400
0-50
00
ø 60
Cone-shaped poles
POLE
S
hole100x50
444
20°
20°
ø60
850
650
1040
663
280
7000
6500
26501325
7000
6500
ø102, silver colour steel pole. Complete with inspection window with removable termi-nal strip. The version with base comes complete with a plinth, 4 tie rods to be buried, bolts, nuts and caps.
Use with accessories 465/467 and with articles Agadir and Monza is recommended.
acc. 465 pole arms. silver 991411
The pole arm for Monza. To be used with poles art. 1492/1494.
acc. 467 pole arms. silver 991413
The pole arm for Monza. To be used with poles art. 1492/1494.
Steel poles ø 102
445
13001300
1000
800
400
1300
1000
1300
40m
m
100
800
Cava 100x50 r25
191
1100
6500
ø102
ø60
191
1100
6500
ø102
800
ø60
400
300
ø 20
250
295300
250
ø 430
ø 102
170
400
1300
1000
1300
40m
m
Inspection door with easily removable ter-minal board for quick connection.
Concrete base dimensions (subject to soil variations)
acc 1492 steel pole to be buriedh a. 6500 h u. 800 silver 425061
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
acc 1494 steel pole with baseh a. 6500 silver 425071
Concrete base dimensions (subject to soil variations)
Inspection door with easily removable ter-minal board for quick connection.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
acc. 222 base pole covers. silver 991399
To be used as base pole cover acc. 1492/1494.
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.
POLE
S
Steel poles ø 102
hole100x50 r25
446
163
ø60 ø 121
ø 430 170
NOTE: When using Insulation Class I fixtures, appropriate grounding con-nections should be included in the system.
NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI standard 40/6.
acc. 222 base pole covers. silver 991378bla. 991380graphite 991381In die-cast aluminium. To be used as a base pole cover acc. 1493.
Installation acc. 222 on the pole base.
acc. 368 mast-top-pole connec.galvanized 426996
In galvanized steel. To be used as a mast-top-pole connection on poles acc. 1491/1493.
Padova
Hot-dip galvanised steel poles.Equipped with inspection window (293x94 mm), removable 4-pole termi-nal block, max. cross-section 16 sqmm. Supplied with 2 16A safety fuses. With hole for insertion of power supply cable; with holes at different heights according to use.The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps.Standard insulation class II.
Milan
Steel poles ø 120
447
500
353
800
300
ø25
ø121
800
6000
-700
0-80
00
Cava 150x50 r25
13001300
1000
800
400
1300
1000
1300
40m
m
400
300
ø 20
250
295295
250
500
353
800
ø25
ø121
6000
-680
0-78
00
400
1300
1000
1300
40m
m
Inspection door with easily removable ter-minal board for quick connection.
acc 1491 steel pole to be buriedh a. 6000 h u. 800 galvanized 426150h a. 7000 h u. 800 galvanized 426151h a. 8000 h u. 800 galvanized 426152Supplied with end cap and holes to let the cables through.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
acc 1493 steel pole with baseh a. 6000 galvanized 426160h a. 6800 galvanized 426161h a. 7800 galvanized 426162Supplied with end cap and holes to let the cables through.
Concrete base dimensions (subject to soil variations)
Inspection door with easily removable ter-minal board for quick connection.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
acc 1491 painted pole with colour choiceh a. 6000 h u. 800 paintedh a. 7000 h u. 800 paintedh a. 8000 h u. 800 paintedSupplied with end cap and holes to let the cables through. The pain-ted version is with RAL selected colour as indicated.
acc 1493 steel pole with baseh a. 6000 paintedh a. 6800 paintedh a. 7800 paintedSupplied with end cap and holes to let the cables through. The pain-ted version is with RAL selected colour as indicated.
Concrete base dimensions (subject to soil variations)
Steel poles ø 120
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.
POLE
S
hole150x50 r25
448
163
ø60 acc. 368 mast-top-pole connec.galvanized 426996
In galvanized steel. To be used as mast-top-pole connection on poles acc. 1505/1503.
ø 193
ø 430 170
acc. 223 base pole covers. silver 991379Die-cast aluminium. To be used as base pole cover acc. 1503.
NOTE: When using Insulation Class I fixtures, appropriate grounding con-nections should be included in the system.
NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI standard 40/6.
Steel pole ø 120 -193
Hot-dip galvanised steel poles.Equipped with inspection window (293x94 mm), removable 4-pole termi-nal block, max. cross-section 16 sqmm. Supplied with 2 16A safety fuses. With hole for insertion of power supply cable; with holes at different heights according to use.The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps.Standard insulation class II.
Arcugnano - Vicenza
Installation acc. 223 on the pole base.
449
13001300
1000
800
ø25
ø193
ø121
Cava 150x50 r25
500
239
1380
300
800
3000
9000
ø25
ø193
ø121
500
239
3000
9000
880
400
1300
1000
1300
40m
m
400
300
ø 20
250
295400
300
400
1300
1000
1300
40m
m
ø25
ø193
ø121
ø25
ø193
ø121
500
9000
3000
239
1380
300
800
Cava 150x50 r25
500
9000
239
3000
880
acc 1503 steel pole to be buriedh a. 9000 h u. 800 galvanized 426575Supplied with end cap and holes to let the cables through.
acc 1503 painted pole with colour choiceh a. 9000 h u. 800 paintedSupplied with end cap and holes to let the cables through. The pain-ted version is with RAL selected colour as indicated.
Concrete base dimensions (subject to soil variations)
Inspection door with easily removable ter-minal board for quick connection.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
acc 1505 steel pole with baseh a. 9000 galvanized 426585Supplied with end cap and holes to let the cables through.
acc 1505 painted steel pole with baseh a. 9000 paintedSupplied with end cap and holes to let the cables through. The pain-ted version is with RAL selected colour as indicated.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
Concrete base dimensions (subject to soil variations)Inspection door with
easily removable ter-minal board for quick connection.
POLE
S
Steel pole ø 120 -193
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite
hole150x50 r25
450
1500
530
ø60
700
530
ø60
ø90
200
20
Hot galvanised steel poles. Complete with inspection win-dow (239x64mm), with 4-pole and 16mm2 maximum cross section removable terminal strip. With 2 16A rated protection fuses. Arranged with the power cable entry hole.The version with base comes complete with a plinth, with 4 tie rods to be buried, bolts, nuts and caps.Class II insulation as a standard feature. Attention is required when using fixtures with class I insulation since earthing con-nections must be foreseen.N.B.: The possibility of combining a composition to the pole is subordinated to verifying the ability to withstand the wind force in the areas foreseen by the ENV 1991-2-4 standards. In accordance with the load assumptions foreseen in the EN 40-3-1 standards.For technical information see chapter.
acc. 406 Aliante arms. silver 991387graphite 991388In steel. It permits the pole application acc. 1475/1476.
acc. 450 LED head CTLLED whi 991395LED blue 991395-71To be installed on pole to give an aesthetic finish.
acc. 407 Aliante arms. silver 991389graphite 991390In steel. It permits the pole application acc. 1475/1476.
Pole installation example of acc. 450. Supplied with 3W triple lens LED modu-le, white or standard bluee.
Steel pole “Aliante” ø 120-193
451
400
1300
1000
1300
40m
m
400
300
ø 20
250
295400
330
13001300
1000
800
880
ø193
239
2000
8000
ø121
8000
Cava 150x50 r25
239
1380
300
2000
ø121
800
ø193
400
1300
1000
1300
40m
m
acc 1475 Aliante pole to be buriedh a. 8000 h u. 800 silver 426180Supplied with end cap and holes to let the cables through. The pain-ted version is with RAL selected colour as indicated. Cycle pathway versions are available on request.
acc 1476 Aliante pole with baseh a. 8000 silver 426190Supplied with end cap and holes to let the cables through. The pain-ted version is with RAL selected colour as indicated. Cycle pathway versions are available on request.
Concrete base dimensions (subject to soil variations)
Inspection door with easily removable ter-minal board for quick connection.
Concrete base dimensions (subject to soil variations)
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
Inspection door with easily removable ter-minal board for quick connection.
ON REQUESTPossibility of supplyng poles with the following colour paint
finishes:RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006,
7037, 6004, 8019, 6011, 7022, 1015, 9010.
For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite
POLE
S
Steel pole “Aliante” ø 120-193
hole150x50 r25
452
8165
4500
8200
8180
8180
4500
8200
2
7
12172227
3237
42
2150
2000
21501350
3
7
1115192327
3135
4
22
31
40
49
586776
13
1475/1476
1475/1476
ACC 407
ACC 407
ACC 407 ACC 455ACC 406
1720 1720ACC 407
1475/1476
ACC 450
9
16
2330
3744
51
58
65
65
1475/1476
ø121
ø193
ø121
ø193
ø121
ø193
ø121
ø193
ES. ac 91 - 1 GioviComponents:1 Giovi1 pole to be selected between acc. 1475/76*1 arm acc. 407 991389/90
*Pole height can be specified as desired
Example of project with art. 1752 - SAP-T 150. Area 15x30 m; h=8 m
Example of project with 1752/1753SAP-T150. Area 20x30m; h=8/4,5
Example of project with art.1652 - SAP-T 150. Area 15x30 m; h=8 m
Example of project with 1755 - HCI-T 150. Area 20x30 m; h=8 m
ES. ac 71 - 1 MetropolisComponents:1 Metropolis1 pole to be selected between acc. 1475/76*1 arm acc. 407 991389/90
*Pole height can be specified as desired
ES. ac 76 - 2 MetropolisComponents:2 Metropolis1 pole to be selected between acc. 1475/76*1 arm acc. 407 991389/901 arm acc. 406 991387/88
*Pole height can be specified as desired
ES. ac 23 - 2 MonzaComponents:2 Monza1 pole to be selected between acc. 1475/76*2 arms acc. 407 991389/901 led head acc. 450 991395
*Pole height can be specified as desired
Aliante composition examples
453
4500
8100
HOTEL
8100
PARKING
4500
8100
8100
1386
7000
6500
7000
6500
2116
412202836
44526068
1475/1476
ACC 407 ACC 455
1475/1476
1316 2116
ACC 455
ACC 406ACC 407
4
1220
2836
4452
52
60
60
68
2650
1386
1492/1494
ACC 467
4
10
16222834
405246
1492/1494
ACC 465
28 28
2828
212189
16614312097
7451
1325
7000
6500
ø121
ø193
ø121
ø193
ø121
ø193
ø102 ø102
ES. ac 15 - 1 TorpedoComponents:1 Torpedo1 pole to be selected between acc. 1475/76*1 arm acc. 407 991389/901 attachment acc. 455 991400/01
*Pole height can be specified as desired
ES. ac 17 - 2 TorpedoComponents:2 Torpedo1 pole to be selected between acc. 1475/76*1 arm acc. 407 991389/901 arm acc. 406 991387/882 attachments acc. 455 991400/01
*Pole height can be specified as desired
ES. ac 26 - 2 AgadirComponents:2 Agadir1 pole to be selected between acc. 1492/1494*2 arms acc. 465 991411
*Pole height can be specified as desired
ES. ac 25 - 1 MonzaComponents:1 Monza1 pole to be selected between acc. 1492/1494*1 arm acc. 467 991413
*Pole height can be specified as desiredExample of project with 1755HCI-T 150. Area 15x30m; h=8
Example of project with 1584 JM-TS 150. Area 15x30m; h=5
Example of project with 1240 - CDM-TT 150. Area 15x30 m; h=8 m
Example of project with 1240/1244 CDM-TT150 JM-T70. Area 30x20 m; h=8/4,5
POLE
S
Composition examples
454
BAR
5750
/675
0/77
50
3298
/429
8/51
98/6
198
5860
/686
0/87
60
3360
/436
0/52
60
BAR
ACC 301
1508/1509
2848
ACC 210
1491/93/97/98
2012
ACC 211ACC 210
ACC 215ACC 213
ACC 212
7256
6448
8
8
3240
24
8
8 16
1491/1493
ACC 210 ACC 212ACC 211
ACC 214 ACC 215
2840
ACC 155
1400
1508/1509
ACC 300 ACC 301 ACC 309
6 6
6 6
9 9
9 9
9 9
12
151821242730
12 12
ø120 ø120 ø121 ø121
ES. ac 74 - 1 MetropolisComponents:1 Metropolis1 pole to be selected between acc. 1491/93*1 Sector arm acc. 210 426950/511 Sector connect. acc. 211 426952/531 ring acc. 212 426954/551 attachment acc. 213 426956/57 1 tie-rod acc. 215 426960
*Pole height can be specified as desired
ES. b 30 - 2 MetropolisComponents:2 Metropolis1 pole to be selected between acc. 1508/1509*1 Oliva acc. 300 426970/712 arms Sector acc. 210 426950/51
*Pole height can be specified as desired
ES. ac95 - 2 CapriComponents:2 Capri1 pole to be selected between acc.1491/93*2 Sector arm acc. 210 426950/511 Sector connect. acc. 211 426952/531 ring acc. 212 426954/552 attachment acc. 214 426958/59 2 tie-rods acc. 215 4269602 pole attach. acc. 155 991362
*Pole height can be specified as desired
ES. b82 with scored pole ø120Components:2 Lanterna art. 1760/61/62/63/64/651 pole to be selected between acc 1508 e 1509*1 Oliva acc. 300 426970/712 Oliva arms acc. 301 426972/732 attachments acc 309 426993
*Pole height can be specified as desired
Examples of assemblies
Example of project with 2 metropolisSAP-T70. Area 20x20m; h=5; I=0°
Example of project with art. 1752 - SAP-T 150. Area 10x7 m; h=5 m
Example of project with art. 1552 - JM-E 150. Area 16x8 m; h=5 m
Example of project with art. 1762 - SAP-E 100. Area 15x15 m; h=3 m
455
HOTEL
6000
/700
0/80
00
3720
/472
0/56
20/6
620
500
600
800
6150
-715
0-81
50
1491/93
ACC 211 ACC 213 ACC 301
ACC 303
1508/1509
75
514335
271911
1111
67
6759
67
5943
3527 19
11
1400ACC 301ACC 300 ACC 303
149193/1503/5
ACC 210965965
ACC 300 ACC 405
45678
9 10
11
11
10 HOTEL
10
172431
3845
5259
66
1860
1492/1494
ACC 300 ACC 301 ACC 304
5700
ø102 ø121 ø120 ø121
2311
107
35
59
957147
83
ES. b 28 - 1 MonzaComponents:2 Monza1 pole to be selected between acc. 1491/93/1503/05*1 Oliva acc. 300 426970/712 Sector arms acc.210 426950/512 connection acc. 405 991385/86
*Pole height can be specified as desired
ES. b14 with pole Ø120 - 2 VistaComponents:2 Vista art. (chose one from art. 1596/98/99)1 pole to be selected between acc. 1508 e 1509*1 Oliva acc. 301 426972/732 Oliva arms acc. 300 426970/712 attach. ø 60 acc. 303 426976/77
*Pole height can be specified as desired
ES. b 28 - with steel pole ø120 - 1 TorciaComponents:1 Torcia (choose three art.)1 pole to be selected between acc 1491 e 1493*1 attach. arm oliva acc. 301 426972/731 Sector connect. acc. 211 426952/531 banner connect. acc. 213 426956/571 attach. ø60 acc. 303 426976/77
*Pole height can be specified as desired
ES. ac 34 - MontecarloComponents:2 Montecarlo art. 3171/72/731 pole to be selected between acc. 1492/94*1 Oliva acc. 300 426970/712 Oliva arms 301 426972/732 threaded connec. acc. 304 426978
*Pole height can be specified as desired
POLE
S
Example of project with art. 3171JM-TS 150. Area 15x20m; h=5
Examples of assemblies
Example of project with art.1598 - JMTS 150. Area 14x7 m; h=5000mm
Example of project with art. 1511HCI-T150. Area 20x20m; h=5,56
Example of project with art. 1755HCI-T150. Area 20x30m; h=8