Catalogo Testing. China

7/23/2019 Catalogo Testing. China

http://slidepdf.com/reader/full/catalogo-testing-china 1/83

Fresh concrete testingCONCRETE TESTING

page 2 http://www.testmould.com

SAMPLING OF FRESH CONCRETE

Model No Capacity(oz) Weight(g) Long(mm)

SC-R06 06 78 190SC-R12 12 120 220

SC-R24 24 210 270SC-R38 38 300 310SC-R58 58 440 380SC-R85 85 525 415

SC-F12 12 115 220

SC-F24 24 210 270SC-F38 38 300 310SC-F58 58 440 380SC-F85 85 525 415

STANDARD:EN12350-1

SC series scoop

Material: Stainless steel, Aluminium

SC-R

SC-F

STANDARD:

EN 12350-2, BS 1881:102, ASTM C143

SM series slump coneThe Slump Cone (also known as Abrams cone) is spun fromheavy gauge steel and is seamless to provide a stronger,more durable product that is easy to clean. All parts areplated for rust resistance.

20 cm Dia base, 10 cm Dia top and 30 cm height.

SLUMP TEST

ModelNo

Dimension(mm)

Weight(kg)

Remark

SM-EG 100x200x300 2.0 Galvanized

SM-EP 100x200x300 2.0 Blue

SM-EB 100x200x300 2.0 Black

SM-LG 100x200x300 3.0 Galvanized

SM-PL 100x200x300 3.0 Abs plastic with funnel

SM-HS 100x200x300 1.5 S/S

The correct sampling and mixing of fresh concrete isimportant if test results are to be reliable. Most of theequipment necessary for efficient sampling and mixing isstandard laboratory equipment detailed in the LaboratoryEquipment Section of this catalogue.

125 mm dia. x 250 mm long, 5 kg capacity. Ideal for takingincrements of concrete.

SC-M Metal scoop

SC-M

SM-HS slump cone

http://www.testmould.com/




http://www.testmould.com page

3

SLUMP TEST(CONTINUED)

The test apparatus is carried out by filling the slump conewith freshly mixed concrete which is tamped with a steel

rod in three layers. The concrete is levelled off with the topof the slump cone, the cone removed, and the slump of thesample is immediately measured.

STA-01 Slump cone test set


SM-EB Slump cone

Weigt approx: 7 Kg

SM-EP Slump cone

We propose two different models: the standard oneparticularly suitable for laboratory testing and the portablemodel very practical for site testing. A number of partsand accessories are however available for particularrequirements.

Accessories

SM series Slump Cone

Two models of rule available:

SM-R3 Steel rule 300 mm long

or SM-R5 Steel rule 500 mm long

SM-BP40 Metal base plate 400x400x40 mm

SM-F Slump cone funnel

SC series Scoop

TR-S600 Steel tamping rod

To ensure that concrete achieves its maximum possiblestrength and yet retains its ease of placing on site, it isessential that the design of the concrete mix, in relation tothe water-cement ratio and workability, is closely controlled.









STA-03 Slump cone Test Set



TR-S600 Steel tamping rod

Accessories

SM series Slump cone

Two models of rule available: SM-R3 Steel rule 300 mm long



galvanized

SC series Scoop

TR-S600 Steel tamping rod,

600 mm long x 16 mm dia,

hemispherical at both ends.

TR-S380 Metal tamping bar, 380 mm long

Weight: 1.6 Kg

Accessories

SM series Slump cone

Two models of rule available:

SM-R3 Steel rule 300 mm long



SC series Scoop

TR-S600 Steel tamping rod,



Weight(approx): 0.95 Kg






5


STA-04 Portable slump cone test set

Portable slump cone test set Complete with metal baseplate SM-BP/C and TR-G graduated tamping rod. Clampson the base hold the cone for filling and tamping. Afterthe cone is removed, the handle raises over the specimen

and the slump is measured using a 22 cm scale engravedin 1 cm increments on the end of the rod. The set ofcomponents are fitted together for easy carrying.

Weight approx: 8 Kg

Accessories

SM series stainless slump cone

SM-BP/C Base plate with clamps and

measuring bridge

SC series scoop

TR-Steel graduated tamping rod,



VEBÉ TEST

STANDARD: EN 12350-3

This test method is a variation of the simple slump test andsubjects the concrete to vibration after removal from theslump cone.The time taken for the concrete to be recompacted is takenas a measure of workability.The small vibrating table operates at a fixed amplitudeand frequency, and in the test a plastiisc is placed intocontact with the upper surface of the concrete. The testis completed when the lower surface of the disc has beencompletely coated with cement grout.

EL34-0300/01

Vebé consistometer

EL34-0300/01 Vebé consistometer

STA-04 Portable slump test set

Specification

Vibrating freqency: 50 HZ

Power: 380 V, 250 W

Swing: 0.5±0.1 mm







FLOW TABLE LABORATORY METHOD

STANDARD: BS 4551-1, 3892-1, ASTM C320STANDARD: BS 1881-103, BS 5075

FT-A Motorized concrete flow table

FT-B Motorized concrete flow table

To determining the quantity of water and the standardconsistence by measuring the fluidity of cement mortar.

left: FT-A flow table; right: FT-B flow table

Specification

Weight of vibrating part: 3.45±0.010 kg

Drop height: 10±0.1 mmVibrating frequency: 1 HZ

Working cycle: 30 S-25 STable diameter: 300±1 mm

Dimensions: 400×400×690 mm

Net weight: 25 kg

Specification

Weight of vibrating part: 4.35 Kg±0.15 kg

Drop height: 10±0.2 mmVibrating frequency: 1 HZ

Working cycle: 25 STable diameter: 300 mm

Net weight: 25 kg

The apparatus is used for determining the workability offresh concrete, provided the maximum size of the aggregatedoes not exceed 38 mm. The test is particularly useful forconcrete mixes of very low workability where true slumpvalues are not reliable.

It consists of two rigid conical hoppers and a cylindermounted on a rigid metal frame. The lower openings ofthe hoppers are fitted with hinged trap-doors having quickrelease catches. A circular metal plate is provided to coverthe top of the cylinder.

COMPACTION FACTOR APPARATUS

CF-A Compaction factor

CF-A Compaction factor






7

FLOW TABLE TEST


54-C0151/A Concrete flow table consists of a

double wooden table measuring 700x700 mm and hingedat one side. The top table is covered with a flat metal plate2 mm thick, inscribed, and protected against corrosion. Thegalvanised steel cone has a top 130 mm dia., base 200 mmdia., and is 200 mm high. Supplied complete with woodentamping rod.

General description and specifications

Concrete flow table

Weight appox: 25 Kg

Spare parts 54-C0151/1 Flow cone top 130 mm dia., base 200 mmdia., 200 mm high

54-C0151/2 Wooden taping rod

This test will be of interest to those involved with concretehaving a high workability. The test determines the flow index

as an arithmetic mean of the diameter of the specimen afterworking on a flow table.

Concrete flow table

When fresh concrete is delivered to a site by atruck mixer it is sometimes necessary to check its consistence before pouring it into formwork.If the consistence is not correct, the concrete will nothave the desired qualities once it has set, particularly thedesired strength. If the concrete is too pasty, it may result incavities within the concrete which leads to corrosion of therebar, eventually leading to the formation of cracks whichwill accelerate the whole process, rather like insufficientconcrete cover. Cavities will also lower the stress theconcrete is able to support.

- The flowtable is wetted.- The upside down funnel is placed on the flowtable andfilled with fresh concrete.

- The funnel is lifted up, allowing the concrete to flow.- The flowtable is then lifted up several centimeters andthen dropped, causing the concrete flow a little bit further.- After this the diameter of the concrete is measured. Theresult is called "Ausbreitmaß" in German.

Conducting the test

The upside down funnel filled with concrete prior to lifting.

The diameter of the resulting flow is measured.

These images show a flow test with very fluid concrete for a special application

which made compression impossible.





Hardened concrete testingCONCRETE TESTING


CONCRETE MIXERS

ModelNo.

Voltage Frequency PowerMotorSpeed

Drum SpeedDrum

CapacityDrum Diameter Net Weight

PM-01 110V/230V 50/60Hz 1/2 HP 1420r/min 27r/min 130L/140L 10" 65 Kg

PM-02 110V/230V 50/60Hz 0.5 HP 1420r/min 27r/min 140L

PM-03 110V/230V 50/60Hz 5.5-9 HP 1420r/min 27r/min 260L/350L 313 Kg/338 Kg

PM-04 110V/230V 50/60Hz 1/4 HP 1420r/min 27r/min 52L 10" 36 Kg



Concrete mixer

An extremely mobile mixer,equipped with a manuallycontrolled discharge foreasy unloading of the mixerinto a suitable container orwheelbarrow. The mixingblades and paddle areproduced from a specialsteel to resist wear, and toensure a fast and effectivemixing operation.

PM-01

PM-02

PM-03

PM-04 PM-05

PM-06








9

CONCRETE CORE DRILL

CD-E/1 core drilling machine

CD-E/1 Core drilling machine.

Electric motor.

Main features:1. Full 360o operation for coring at any angle.2. Be equipped with safety clutch to prevent damagingbody when bit freezing torque force is too high.

CD-E/2 Core drilling machine.

Specification

Max.drilling diameter: 180 mmRated Voltage: 110/220/240V

Rated frequency: 50-60 HzRated input power: 2300 wNo-load speed: 750 r/minN.W: 26 kg

Specification

Max.drilling diameter: 130 mmRated Voltage: 110/220/240V

Rated input power: 1550 wNo-load speed: 1600 r/minN.W: 10.5 kg

Specification

Max.drilling diameter: 200 mmMax depth of drilling: 400 mm-700 mm

Rated input power: 3.3 Kw

Roted speed: 800-1200 r/min

N.W: 130 Kg

Dimentions: 1080×780×1150 mm

CD-P Core drilling machine.

Petrol motor

CD-P core drilling machine





DB Series diamond core drill bit

ITEM NO.OUTER

DIA(INCH)OUTER

DIA.(MM)ITEM NO

OUTERDIA(INCH)

OUTERDIA(MM)

DB 01 1/3 8 DB 21 3 1/4 83

DB 02 2/5 10 DB 22 3 1/2 89

DB 03 1/2 12 DB 23 3 7/9 96

DB 04 5/9 14 DB 24 4 102DB 05 5/8 16 DB 25 4 1/4 108

DB 06 5/7 18 DB 26 4 1/2 114

DB 07 4/5 20 DB 27 4 5/7 120

DB 08 6/7 22 DB 28 5 127

DB 09 1 24 DB 29 5 1/5 132

DB 10 1 26 DB 30 6 150

DB 11 1 1/9 28 DB 31 6 1/4 159

DB 12 1 1/6 30 DB 32 6 1/2 166

DB 13 1 1/4 32 DB 33 7 180

DB 14 1 1/2 38 DB 34 7 7/8 200

DB 15 1 4/7 40 DB 35 8 2/3 220

DB 16 1 3/4 44 DB 36 9 2/3 245

DB 17 2 51 DB 37 10 5/8 270

DB 18 2 1/4 57 DB 38 11 4/5 300

DB 19 2 1/2 63 DB 39 13 7/9 350

DB 20 3 76 DB 40 15 3/4 400

This diamond core drill bit has excellent ability in drillingconcrete, reinforced concrete and brick wall. Thinnerdiamond segment and thinner tube wall can easily reducethe resistance and increase the drilling speed. It may besold separately or with core drilling machine, both modelCD-E and CD-P.

Feature:1. Thinner diamond segment and thinner tube wall caneasily reduce the resistance and increase the drilling speed.2. Very fast cutting speed and low cutting pressure.3. Different connection end for different drilling machine.4. Especiall effective in drilling through reinfored concrete5. The diameter of them can be produce according to therequirment of users, the main dimensions are as followtable.

DB Series diamond core drill bit








11

CONCRETE TEST HAMMERS

HT225-A concrete test hammer

HT225-A Concrete test hammer

This instrument applies to non-destructive testing about theinspection strength of sintered common brick, at the sametime, it is also suitable for light bone structure concrete andother light bone materials strength inspected.

STANDARD: ASTM C 805, BS 1881:202, NF P18-417,

DIN 1048 AND UNI 9189

HT-75 concrete test hammer

HT-75 Concrete test hammerThis instrument applies to non-destructive testing about theinspection strength of sintered common brick, at the sametime, it is also suitable for light bone structure concrete andother light bone materials strength inspected.

Specification

Measuring strength ranges: 10-60 MPa

Normal impact energy: 2.207 J(0.225Kgf.m)Strike hammer stroke: 75 mm

The friction force of pointer slider: 0.5±0.8 NSpherical radius of strike rod: 25 mm±1 mmThe rebound values calibratedon steel anvil:

80±2

Dimensions: Dia. 54×278 mmWeight approx: 1 Kg

Normal impact energy: 0.735 J

Strike hammer stroke: 75 mmThe friction force of pointer slider: 0.5±0.1 NSpherical radius of strike rod: 25±1 mmThe rebound values calibrated

on steel anvil:

74±2


Specification

HT225-P Concrete test hammer

Specification


Strike hammer stroke: 75 mmStiffness of striketension spring:

785±40 N/cm

The rebound valuescalibrated on steel anvil:

80±2

Free length of strike tensionspring:

61.5±0.3 mm

Work temperature: -4— +40Environment humidity: ≤95% (relative humidity)Weight appox: 0.8 Kg

HT225-P CONCRETE TEST HAMMER





HT225-S Concrete test hammer

HT225-S Concrete test hammer

This product completely consistent with national andindustry technical specification.This product is suitable for supervision company, qualitysampling inspected in-site, and testing centers etc., at thesame time, it can automatically evaluating results in-site,without manual calculation.

HT225-V Concrete test hammer

This product completely consistent with national andindustry technical specification.This product is suitable for supervision company, quality

sampling inspected in-site, and testing centers etc., at thesame time, it can automatically evaluating and printingresults in-site, without manual calculation.

CONCRETE TEST HAMMERS(CONTINUED)

HT225-V Concrete test hammer

Specification

Measuring strength ranges: 10-60 Mpa

Normal impact energy: 2.207 J(1 Kgf.m)Strike hammer stroke: 75 mmThe consistency of the sampledisplayed values:

≤±1(difference valuebetween digitalsampling outputvalue and the pointerreadings)

Stiffness of striketension spring:

785 N/cm


80±2

Power: 1.5V AA alkalinebatteries 2 pcs

Power consumption: sampling case≤50mA(average current);idle case: ≤20 mA

Storage: 80000 testing results

Specification

Measuring strength ranges: 10-60 Mpa

Normal impact energy: 2.207 JStrike hammer stroke: 75 mmThe consistency of the sampledisplayed values:

≤±0.5(difference valuebetween digital samplingoutput value and thepointer readings)

Stiffness of striketension spring: 785 N/cm


80±2

Display: 16-bit true color, 176×220resolution, 5 gradesbacklight adjustment

Data storage capacity: 480000 inspecting results,20 special measurtingstrength curves, and itcould also be add by userown according to need

Power: 3.6V/1300mAH recharginglithium battery, charging

power adapter 5V/2A.Maximum backlight, turnoff speech cases, it can becontinuous work 13 hours.

Power consumption appox: 100 mA (Voice off)Maximum backlightsituation

Communication interface: USB2.0 full-speedWeight: 1.1 Kg








13

HT-1000 Concrete test hammer

Model HT-1000 is consistent with JGJ/T23-2001 technicalspecification, and it is suitable for inspecting compressivestrength of high-rise building components, bridges andconcrete structures (such as blabs, beams, columns, bridgeetc.)

Specification

Measuring strength ranges: 50-80 MpaNormal impact energy: 9.8 J(1 Kgf.m)

Strike hammer stroke: 140 mmThe friction force of pointer slider: 0.5±0.8 NStiffness of strike tension spring 10 N/cmThe rebound values calibratedon steel anvil:

83±2

Dimensions: Dia. 65×486 mmWeight approx: 3.5 Kg






This instrument applies to inspect compressive strength ofmortar in masonry for industrial and civil buildings in generalsintered common brick masonry.

HT-3000 is a heavy type Concrete Test Hammer, its kineticenergy of impact is 29.43J. It is extensively used for testingthe concrete’s quality of large concrete component, waterconservancy project, railway tunnel, mines, bridges, heavyways of roads, runways, building foundation beams andetc.

Specification Specification

Measuring strength ranges: 1.0-25 Mpa

Normal impact energy: 0.196 J(0.02kgf.m)

Strike hammer stroke: 75 mmThe friction force of pointer slider: 0.5±0.1 NSpherical radius of strike rod: 25 mmThe rebound values calibratedon steel anvil:

74±2



Strike hammer stroke: 75 mmThe friction force of pointer slider: 0.5±0.1 NSpherical radius of strike rod: 25 mmThe rebound values calibratedon steel anvil:

63±2

Hammer weight: 2 Kg

Static friction between vernier and verniershaft: 100-150g

Dimensions: 105×320×680 mmWeight approx: 8 Kg

CONCRETE TEST HAMMERS(CONTINUED)





CUBE MOULDSCALIBRATION ANVIL

STANDARD:

EN 12390-1, BS1881

STANDARD:

EN 12504-2; ASTM C805, D5873

Test procedures require that specimens are cast in anumber of standard sizes convenient for compressive andflexural strength determination. The engineering tolerancesspecified for moulds are very stringent and the internalfinish of the surface must be of a high order to complywith the recommendations laid down in many Internationalstandards. Moulds must not deform during manufacture ofconcrete specimens if the specimen dimensions are to bemaintained.

CM-FA 4-part with clamp attached base plate. Cube

mould for concrete hardened testing. Material is cast iron.Machined surface finished by flat grinding machine. Nodistortion during specimen preparation.

CM-FA cast iron cube mould

Model No Dimension(mm) Weight(kg)

CM-FA100 100×100×100 9.5

CM-FA150 150×150×150 18

Verification of dimension using digital vernier caliper Verification of dimension using electronic digital display depth caliper

Used for calibration of concrete test hammer (models HTseries). Made of special alloy steel and supplied completewith traceable hardness certificate. It is essential for theperiodical laboratory verification of the Rock classificationhammer.Dimensions: 150 mm dia×230 mm heightWeight(approx): 17 Kg

EL35-1530 Calibration anvil

EL35-1530 Calibration anvil








15

CM-FC Cast iron cube mould

CM-FC Cube mould is build up by four parts 45 degree

wall, save time to assamble or reassamble, we may regardtwo connect wall as one wall, only want to disjoin two partstogether.

CM-E Cast iron cube mould

CM-FB Cube mould4-part with clamp attached base plate.

CUBE MOULDS(CONTINUED)

CM-FB Cast iron cube mould


CM-FC100 100×100×100 9

CM-FC150 150×150×150 16


CM-FB100 100×100×100 9

CM-FB150 150×150×150 16


CM-E100 100×100×100 5.5CM-E150 150×150×150 10

CM-E200 200×200×200 16

CM-E cast iron cube mould poured into concrete CM-E Cast iron cube mould





CM-T Cube mould is new design product, one blot

connect two parts in every side. Save time to assemble ordissassemble the mould. Base clamps on this mould areslotted.

CUBE MOULDS(CONTINUED)

CM-P Cube mould is best economic mould in this

range, it is made of ABS plastic and use special self motioninjection plastice machine to squeezed out, one timefinished and easy to carry.

CM-PA150 Plastic concrete test cube mould

is reusable and sturdy in this range, it is light and easy tocarry, made in collapsible-two parts for quick to install. It willnot rust and easy to maitain.

CM-P Plastic cube mould

CM-PA150 Plastic cube mould

CM-T Cast iron cube mould


CM-T100 100×100×100 9

CM-T150 150×150×150 16


CM-P100 100×100×100 0.7

CM-P150 150×150×150 0.9


CM-PA150 150×150×150 2.7

CM-T Cube mould exploded view








17

These moulds are constructed of plated steel for rustresistance and are dimensionally stable under severe use.Moulds are split along one side with 2 quick-acting clampswelded to mould. When open, mould springs apart slightlyto allow specimen removal. Include detachable base plate.

CYLINDER MOULD

CY-MS Steel cylinder mould

Model NoDimension (mm)

Dia.×HeightWeight

(kg)CY-MS50 50×100 1CY-MS100 100×200 9CY-MS150 150×300 16

CY-MS160 160×320 18

CY-CW100 Steel cylinder mould with handle and lid

Model No Dimension(mm)Dia.×Height

Weight(kg)

Wall thickness(mm)

CY-CW100 100×200 9 5

STANDARD:

ASTM C39, C192 –AASHTO T23, T126

This type cylinder mould is made of cast iron and surface iscoated black or blue and the inner surface is all grinded by

the lathe. It’s very heavy.

CY-MC Cast iron cylinder mould

Model NoDimension(mm)

Dia.×HeightWeight(kg)

CY-MC100 100×200 9

CY-MC150 150×300 17

CY-MC160 160×320 22

CY-MS Steel cylinder mould

CY-MC Cast iron cylinder mould

CY-CW Steel cylinder mould





CYLINDER MOULD(CONTINUED)

Plastic concrete test cylinder mould is reusable andsturdy in this range, it is light and easy to carry, made in

collapsible-two parts for quick to install. It will not rust andeasy to maitain.

The Steel Cylinder Mold is available for preparing concretetest specimens for compression testing. It comprises themold with a ring keep it tightly closed and a base plate thatis fixed to the cylinder when being used. Both items areplated to resist corrosion.



CY-MP/A(with bolt) 100×200 0.89

CY-MP/B(with clip) 100×200 0.92

CY-MP/C(with bolt) 150×300 1.76

CY-MP Plastic cylinder mould CY-SS Steel cylinder mould



Wall thickness(mm)

CY-SS11 150×150 8.6 6

CY-SS12 100×200 6.5 6

CY-SS13 150×300 13 6

CY-SS Steel cylinder mould is split vertically into two parts. Exploded view CY-MP/B Plastic cylinder mould exploded view

CY-SS Steel cylinder mould

CY-MP Plastic cylinder mould








19

BEAM MOULD

STANDARD: EN 12390-1, -2

BM-C75 Cast iron beam mould

The top brim is special design and avoids defacing themachined surface. Inner surface are all machined by grindmahcine.


BM-C15 100×100×500 30

BM-C55 150×150×550 45

BM-C75 150×150×750 55

Model No Dimension(mm) RemarkBM-P13 100×100×300 ABS plastic

BM-P14 100×100×400 ABS plastic



CM-GP Plastic three gang mould

Model No Dimension(mm) Weight(kg) Remark

CM-GP70 70.7×70.7×70.7 0.9 PlasticCM-GP100 100×100×100 1.3 PlasticCM-GP150 150×150×150 2 Plastic

CM-G series three gang mouldsThese moulds are made of cast iron, steel or ABS plastic.Machined surface finished by flat grinding machine. Nodistortion during specimen preparation.

CM-GS Steel three gang mould

Model No Dimension(mm) Weight(kg) RemarkCM-GS50 50×50×50 3.5 Steel

CM-GS70 70.7×70.7×70.7 7 Steel

BM-P Plastic beam mould

These beam moulds are designed to produce accuratespecimens while avoiding distortion over the length of themould.

CM-GC Cast iron three gang mould


CM-GC50 50×50×50 4

CM-GC70 70.7×70.7×70.7 7.5

CM-GC100 100×100×100 12.5

CM-GC150 150×150×150 32





BEAM MOULD(CONTINUED) GROUT FLOW

Grout flow Cone Set

Grout flow Cone Set

BM-S Steel beam mould

Model No Dimension(mm)

BM-S13 100×100×300

BM-S14 100×100×400

BM-S15 100×100×500

BM-S55 150×150×500

BM-S56 150×150×600

BM-S75 150×150×750

Beam mould: steel construction

Three gang mouldSM-C Three gang mould for prisms 40 x 40 x 160mm ismade of steel, base plate is made of cast iron. It conforms

to be above mentioned standard.The mould is used for casting specimens of cementaggregate combinations for measuring the potentialexpansive alkali reactivity.The effective gauge length is made of mild steel and hasaccurately machined faces. The parts of the moulds aretight fitting and firmly held together when assembled.Supplied complete with base plate and stainless steel orbrass smooth reference pins.

SM-C Three gang mould

Model Dimension(mm) Weight(kg) Remark

SM-C41 40×40×160 6 3 gang mould

Test set for measuring the flow of grout for preplaced,aggregate concrete. Intended for neat grout and groutscontaining fine aggregate capable of passing a No. 8sieve and grouts which have an eflux time of less than 35seconds.

STANDARD: ASTM C939, ASTM C6449

FC-13 Grout Flow Cone, 1/2" (13mm)Steel flow cone from above set, has 1/2" (13mm)replaceable orifice. Can also accommodate 3/4" (19mm)orifice, which can be purchased below. Includes adjustablepoint gauge assembly. Overall dimensions: 8" dia. x 12"H

(203 x 305mm).

FC-19 Grout Flow Cone, 3/4" (19mm)Steel flow cone from above set, has 3/4" (19mm)replaceable orifice. Can also accommodate 1/2" (13mm)orifice, which can be purchased below. Includes adjustablepoint gauge assembly. Overall dimensions: 8" dia. x 12"H(203 x 305mm).

Flow Cone StandSturdy well-constructed steel stand to support flow conesso the top is level and the cone free from vibration. Overalldimensions: 21"W x 9-1/2"D x 23"H.








21

VT-M68, VT-M101

CONCRETE VIBRATOR

VIBRATING TABLE

TX series internal concrete vibrators, using the pendulumprinciple, 3000rpm of the devices unit translates via theflexible shaft into 12,000 vibrations per minute in the pokerhead. The low output speed ensures high reliability andextended services life, can be used between two types ofdrive units (interchangeable): electrical motor and petrolor diesel engine drive units’ series, with standard pokerdiameters.

ModelNo

Diameter Vibratingfrequency

Outside Diaof FlexibleHose(mm)

Inner Diaof FlexibleHose(mm)

Length(m) Max.vibration

Force (KN)

Vibrating Amplitude

(mm)

AvailableMotor or engine

TX35 35 183 30 15 1 to 12 5.293 1.15

Electric motor,Gasoline Engine,

Diesel Engine

TX50 50 183 36 20 1 to 12 6.251 1.21

TX70 70 183 36 20 1 to 12 7.157 1.32

TX28 28 183 30 15 1 to 12 4.846 1.11

TX32 32 184 30 15 1 to 12 5.104 1.13

TX38 38 185 30 15 1 to 12 5.485 1.18

TX45 45 186 32 17 1 to 12 5.932 1.2

TX60 60 187 36 20 1 to 12 6.704 1.28

STANDARD: EN 12350-6, -7, 12390-2, 13286-50, 1354

Model: VT-M68, VT-M101

Table size: VT-M68: 600 × 800 mm,VT-M101: 1 m × 1 m

Amplitude: 0.3-0.6 mm

Vibrating frequency: 2860 vibrations/min

Power: 380 V, 1.1 kW

Model: VT-U68, VT-U88

Table size: VT-U68: 600 × 800 mm,VT-U88: 800 × 800 mm

Amplitude: 0.5 mm

Num. Of specimensfor compaction:

6pcs of 1503 mould3pcs of 1003 tri-mould

Vibrating frequency: 50 Hz

Power: 380 V, 1.1 kW

For compacting concrete specimen in the laboratoryvibrating table mounted on a steel stand, supplied withclamp assembly.

Concrete vibrator

STANDARD: EN 12390-2 – ASTM C31

C192 –AASHTO T23, T126

Vibrating table

VT-U68, VT-U88



CONCRETE TESTING


Compression and fexural testing machines

Specification

Max load capacity: 3000 kN

Measuring range: 0~3000 kNDimension of platen: 240 mm x 240 mmDistance between platens: 320 mmMax. Oil pressure: 40 MpaPower: 1.1 KWEntire machine weight: 1900 kg

COMPRESSION TESTING MACHINE Main featuresMachines to meet the requirements of•

BS 3892-3, 187, 6073-1, 6717, AS1012-9, D IN 51220 , 51223 , EN 12390-3 , -4 , -5 ,

12504-1,1354, 1521, 13161, 1338, 772-1, -6, 13286-41

Tests 200, 150 and 100 mm concrete cubes and• cylinders up to 320 x 160 mm diameterLoad pacing facility fitted as standard• Platen handling machines include BS 6073-1,• EN 772-1 specification rectangular platens.Supplied with Windows download software.•

SYE-2000 Compression testing machine

For determining the compressive and flexural strength ofconcrete, brick, stone and other building material. It loads

hydraulic pressure and is main specified of building highwayand building industry. The data is automatically output,connect with computer and easy to operate.

SYE-2000 Compression test machine SYE-3000 Compression test machine

Specification

Max load capacity: 2000 kN

Measuring range: 20~2000 kNDimension of upper platen: 240 mm x 240 mmDimension of lower platen: 300 mm x 250 mmDistance between platens: 320 mmMax. Oil pressure: 40 Mpa Accuracy: +1%Piston Dia. X Max. travel: 250 mm X 50 mmPower: 0.75 KWOverall dimension: 900 X 400 X 1360 mmEntire machine weight: 800 kg

SYE-3000 Compression testing machine




CONCRETE TESTING


23


WE series Compression testing machineIt has oil cylinder put below, hydraulic loading, tested bypendulum, high precision, operate easily. It has three kindsof scale, and each has a full measure range. It can beused for the tensile, compression, bend and shear test ofvarious metal material, plastic, concrete, cement and othernonmetal material.

Model: WE-50, WE-100, WE-300, WE-300B, WE-600B,

WE-1000B

COMPRESSION TESTING MACHINE(CONTINUED)

Code WE-50 WE-100 WE-300

Max load capacity: 50 100 300

Measuring range:0-100-200-50

0-200-500-100

0-600-1500-300

Graduation Unit of Gauge(kN):0-10: 0.020-20: 0.050-50: 1.0

0-20: 0.050-50: 0.10-100: 0.2

0-60: 0.20-150: 0.50-300: 1.0

Accuracy of Value Displayed: ±1% ±1% ±1%

The Max.Distance Between FlexibleClips(mm):

0-600 0-600 0-750

Distance Between Two Props instretdingTest(mm):

400 400 530

Clipping Thickness and The Max. With ofFlast Sample(mm):

15×14 15×40 15×75

Distance Between Upper Lower Plates(mm): 0-250 0-250 0-300

Distance Between Two pull-rods inCompression Test(mm):

284 284 364

Distance Between Two Fulcrums of BendingTest(mm):

30-600 30-600 100-1000

Circular Sample Clipping Diameter(mm): φ4-16 φ6-22 φ10-32

Size of Upper and Lower Plates(mm): φ100 φ100 φ120

Power of Motor(mm): 0.75 0.75 1.5

Contour Size of Main Engine(IncludingPiston Travel) (mm):

750×650×2495 750×650×2495 1200×580×3185

Contour of Dynamometer(mm) 1010×685×1490 1010×685×1490 1040×860×1820

WE series Compression testing machine



CONCRETE TESTING



COMPRESSION TESTING MACHINE(CONTINUED) WE-300B Compression test machine

Code WE-300B WE-600B WE-1000B

Max load capacity: 300kN 600kN 1000kN

Test Force showed

the value of relative

error:

≤±1% ≤±1%≤±1%

Resolution: 0.01kN 0.01kN 0.01kN

Drawing Space: 600mm 600mm 600mm

Crush: 380mm 380mm 380mmClamp mode: Manual intensify Manual / Auto to step up Manual

Clamping diameter ofround specimen:

φ10-32mm Φ13-40mm Φ14-45mm

The thickness of theflat plate specimen:

0-15mm 0-30mm 0-40mm

Shear specimendiameter:

10mm(Alternative) 10m(Alternative) 10mm

The upper and lowerplaten size:

φ160mm( Alternative 204×204mm) φ160mm( Alternative 204×204mm)φ160mm(Replacement of the 204 × 204mm)

The maximumdistance between thecompressed sides:

600mm 600mm 600mm

Pump Motor Power: 1.1kW 1.1kW 1.1kW

Beam moves up anddown motor power:

0.75kW 0.75kW 0.75kW

Host Dimension mm: 650×600×1900 700×600×1950 800 × 600 × 2100

Weight: 1900Kg 2100Kg 2600Kg

Used for a variety of metal materials, tensile, compression,bending and shear tests can also be used as plastic,

concrete, cement and other non-metallic materials,compression tests, increasing simple accessories tocomplete tape chain, wire rope, welding rod, tile, and avariety of component performance tests. The machineis mounted under the cylinder, a low profile, light weight,especially for construction sector.

The control system:1. Electronic measuring, liquid crystal display pilot force -time curve, test power, test power peak, with significantyield characteristics of the material yield strength, theexperimental data easy and intuitive;2, a digital health input sample number, cross-sectionalarea can be the direct determination of the material tensile

strength, yield strength and other mechanical properties;3, experimental results can be printed.




CONCRETE TESTING


25


PROVING RINGS

The proving ring is 0.3 (3/1000) level standard “the Valueof Pressure" measuring instruments. It is mainly used for

verification and calibration about material testing Machines,compression testing machine and other measuringinstruments, equipment. It is also used for other relevantinstruments, equipment, spare parts, components "forcevalue" measurement.

No.Max load(Kn)

Type Load MeasuringDimension(mm)(LxWxH)

N.W.kg

Image

1 0.1 EHB-01

push 125×40×170

0.60

2 0.2 EHB-02 0.63

3 0.3 EHB-03 0.64

4 0.6 EHB-06 0.67

5 1 EHB-1 0.71

6 1.5 EHB-1.5 0.74

73

EHB-3 pull-push 200×110×210 2.1

8 EHB-3A push 200×110×190 1.9

9

6

EHB-6 pull-push 200×110×210 2.4

10 EHB-6A push 200×110×190 2.1

11 EHB-6B Special for bending tester 200×110×350 3.1

1210

EHB-10 pull-push 210×110×215 3.6

13 EHB-10A push 210×110×200 3.1

14 30 EHB-30 pull-push 210×115×230 4.6

15 EHB-30A push 210×115×200 3.7

16 60 EHB-60 pull-push 210×115×230 6.1

17 EHB-60A push 210×115×200 5.1

18 100 EHB-100 pull-push 210×130×250 7.2

19 EHB-100A push 210×130×230 7.5

20 300 EHB-300 pull-push 225×160×335 13.3

21 EHB-300A push 225×160×235 10.8

22 600 EHB-600A 250×195×250 20.3

23 EHB-600B 165×150×205 6.5

24 1000 EHB-1000A 270×205×270 31.0

25 EHB-1000B 170×160×225 9.826 2000 EHB-2000A 220×180×260 22.1

27 3000 EHB-3000 240×180×305 29

28 5000 EHB-5000 270×195×360 51

The proving ring is a device used to measure force.It consists of an elastic ring of known diameter with ameasuring device located in the center of the ring.

Proving rings come in a variety of sizes.They are made of asteel alloy. Manufacturing consists of rough machining fromannealed forgings, heat treatment, and precision grinding tofinal size and finish.



Soil testingSOIL TESTING


SOIL SAMPLING

Hand auger set are suitable for hand-boring in cohesivesoils or sands and gravels, above the water table to a depthof 5 or 6 metres.

STANDARD: ASTM D420, D1452 / AASHTO T86,

T202 / CNR a. VI n. 25

Soil Auger Heads are constructed of heavy duty steel platesforming an open tube partly interlocking at the cutting end.Two diameters are available 100 mm or 150 mm.The Gravel Auger Head comprises a one piece steel castingwith a spiral point and two clap plates designed to closewhen lifting samples from the borehole. Its diameter is 150mm.

The auger heads is connected to Extension Rodsconstructed of steel tubing 1 metre long. A Handle withT-piece is attached to the uppermost extension rod.

HAND AUGER SET

SOIL AUGER

Hand auger set

Model Description

16-T0006/A Hand auger head 100 mm dia.

16-T0007/A Hand auger head 150 mm dia.

16-T0008/A Spiral soil auger head 25 mm dia.

16-T0008/BDutch soil auger head, Edelman model,

70 mm dia., for soft fine soils

16-T0010/6 steel tube dia. 38x230 mm

Accessories

16-T0005/1 "T" handle

16-T0005/2 Extension rod 1 m length

16-T0005/3 Chisel

YZ-1 Sampling equipment to take undisturbed

soil sample.

YZ-1

Each item can be ordered individually.

Spare parts

Bulldozer

Drill pipe: metal struction with scale

Drill cylinder: 100ml

Specimen cup: 100ml

LX-1 Spiral soil auger

Model: LX-1

Auger head: Φ50mm x 200mm

Drill pipe length: 5m

Weight: 16Kg

Drill pipe with scale






27

SOIL SAMPLE RINGS AND CONTAINERS

Soil sample rings are stainless steel rings made of seamlesstubes, smooth inside and out. The bottom of the ring has a

cutting edge.

ModelDimensions

mmCapacity

cm3

NS-09 ¢79.8×20 50

NS-10 ¢61.8×20 30NS-11 ¢50.4×50 100

NS-12¢50.4×50

as a complete set100

NS-13 ¢70×52with Stainless Steel Caseback

200

NS-14 ¢61.8×40 200

ModelDimensions

mmRemark

QL1-A ¢70 ×38mm big size and additional thickness

QL1-B ¢55 ×28 middle size and additionalthickness

QL1-C ¢40 ×20 small size and additional thickness

Stainless steel soil sample rings

NS09,NS10,NS11,NS12,NS13,NS14

Aluminum Soil Sample Containers

QL1-A, QL1-B, QL1-C

Soil sample rings and containers

STANDARD: ASTM D4318/BS1377:2

The Liquid limit device is used to determine the moisturecontent at which clay soils pass from a plastic to a liquidstate.

Different models are available conforming to the variousspecifications in use. They are identical in shape anddifferent generally according to type of base and cupweight. We can supply two versions: hand operated andmotor operated.

LIQUID LIMIT DEVICE

Grooving tools

Spare parts

Removable brass cup, spare cup with roughenedsurface for use with low plasticity sandy soils.

Adjustable crank and cam mechanism

Blow counter and base

Grooving tools, to be ordered separatedly.

Motor operated model liquid limit device

22-T0031/E Motor operated model

22-T0031/E Motor operated model liquid limit

deviceNet weight: 6.2 kg







PLASTIC LIMIT TEST SET

SAMPLE REDUCTION

STANDARD:

ASTM D4318 / AASHTO T90 / BS 1377:2

UNE 103-104 / UNI 10014 / NF P94-051

STANDARD:

BS 1377:2/ ASTM D421

Each item can be ordered individually.

Accessories

Plastic limit plate 300×300 mm

Stainless steel rod 3 mm dia

Mixing dish 120 mm dia

Moisture tin 75 mm dia. ×30 mm

22-T0041 Plastic limit test set

Mortar and pestleThe ceramic mortar & pestle are used to gently crushindividual particles for chemical tests.

22-T0041 PLASTIC LIMIT TEST SET

TPM series Mortar and pestle

Model Diameter(mm)TPM-60 60

TPM-80 80

TPM-100 100

TPM-130 130

TPM-160 160

TPM-216 216

TPM-254 254

TPM-305 305

RIFFLE BOXES (SAMPLE DIVIDERS)

For the rapid preparation of samples, i.e. division intotwo representative portions. Detailed below is a range ofdividers, each constructed of heavy gauge sheet metal, withparticular attention given to reinforcement of the partitionsto maintain the accuracy of the slot dimensions.The units offered are supplied in a range of sizes from 7 mmto 64 mm slots.

STANDARD:

EN 932-1, 932-2 – ASTM C702

ModelMax. size

sample(mm)BS EN

Slotwidth(mm)

No. ofslots

ApproxCapacity

EL23-3000 4.5 3.5 7 12 0.3EL23-3050 8.5 6.5 13 12 2.0

EL23-3070 10.0 7.5 15 12 2.0

EL23-3100 12.5 9.5 19 10 4.0

EL23-3150 16.5 12.5 25 10 4.0

EL23-3170 20.0 15 30 10 4.0

EL23-3200 25.0 19 38 8 11.0

EL23-3300 33.0 25 50 8 14.0

EL23-3350 42.5 32 64 8 18.0

EL23 series riffle box

EL23 series riffle box exploded view






29

EXTRUDERS

STANDARD:

ASTM D698, D1587, D1883, BS 598:107, 1377:4, 1924:2

For stripping the cylinder specimen of asphalt mixtures fromthe mold without destruction.

Model: CTE-H

Capacity: 5 tons maximum

Soil specimen: Dia.102 × 116, Dia.152 × 116 mm

Bituminous mixmaterial specimen:

Dia.101.6 × 87 mm

Materia stabilizedwith inorganic :

Dia. 50 × 50, Dia. 100 × 100Dia. 150 × 150

Weight: 47 Kg

Hydraulic extruder

Electric extruder

Model: CT

Mold dimensions:

Soil specimen: Dia. 102 x 116 mm,Dia. 152 x 116

Bituminous mixmaterial specimen:

Dia. 101.6 x 87 mm

Material stability

with inorganicbinders:

Dia. 50mm × 50mm,

Dia. 100mm × 100mm,Dia. 150mm × 150mmMaximum axialcapacity:

150 KN

Maximum travel: 250mmSpeed forward/ reverse:

170mm/min.

Power supply: 380V 50Hz

Input power: 1100 W

The Ejector is used for ejecting the specimen made ofbituminous mix material and the material stabilized with

inorganic binders etc. It can quickly eject the specimen fromthe mold and easy to operate.







LABORATORY MIXER

This mixer is designed to mix mortars and cement pastesto the requirements of the above standards.The mixingpaddle has a planetary motion and is driven by a motor witha microprocessor based speed and program controller.The mixer can be operated either in an automatic or manualmode.When the mixer is used in the manual mode, thetwo mixing speeds can be changed by means of a rocker

switch, without switching off the motor. In the automaticmode any one of the pre-set mixing programmes may beselected.

STANDARD:

BS 1337/2, NF P94-052,1

CONE PENETROMETER

MODEL: LB-160B

Power: 230 V, 50 Hz, 1 ph.Width of mixing blade: 135 mm

Mixing bowl capacity: 5 LRotation speed of mixingblade revolution(r/min):

low: 140±5 62±5 high: 285±10 125±10

Net weight(approx): 70 kg

CT-M Penetrometer

STANDARD:

BS 3892-1, 3892-3, 6463-103, 4551-1, ISO 679,

EN 196-1, 196-3, 413-2, 459-2, 1744-1, 13279-2, 1015-2,

13395-1,13454-2

LABORATORY MIXER

LB-160B LABORATORY MIXER

Cone Penetrometer

The Cone Penetrometer test method for Liquid Limit isbased on the relationship between the moisture content andthe penetration of a cone into a soil sample.

Comprising

a cast aluminum base

150mm dia. dial with 0.1mm subdivisionscalibrated cursor

automatic zeroing device

release button

micrometric displacement device

penetration test cone and two sample brass cups






31

SAND REPLACEMENT COMPLETE SET

This equipment is used to determine the dry density of in-situ soils. Apparatus is included which satisfies BS, ASTMand AASHTO specifications.

STANDARD: BS 1377, 1924

SR-100 Sand replacement complete set

Sand Replacement Pouring Cylinder 100 mmCalibration Container 100 mmTray with 100 mm central hole, 300 mm square, galvanised steel

SR-150 sand replacement complete set

Sand Replacement Pouring Cylinder 150 mm

Calibration Container 150 mm

Tray with 150 mm central hole, 300 mm square, galvanised steel

SAND DENSITY CONE APPARATUS

ASTM STANDARDS

35-T0129Sand Cone apparatus 6 inch(152 mm)5 litre plastic container for sand cone

Base plate with 6.5 inch(165 mm) diameter hole

SR-200 Sand replacement complete set

Sand Replacement Pouring Cylinder 200 mmCalibration Container 200 mm calibrate density of sandflowing from the cylinder.Tray with 200 mm central hole, 500 mm square, galvanised steel

Sand Replacement Pouring Cylinder

35-T0129







PROCTOR MOULDS

Used for determining the relationship between the moisturecontent and density of compacted soil. Made of plated

steel. Includes collar, mould body and base plate.Different models are available conforming to the variousspecifications in use. They are identical in shape and slightlydiffer in diameter and capacity.

ASTM PROCTOR MOULDS

PROCTOR RAMMERS

Used to compact the soil sample in the Proctor moulds.Made of plated steel. Guide sleeve with vent holes.Different models are available conforming to the variousspecifications in use.

EN PROCTOR RAMMER

ASTM PROCTOR RAMMER

ModelDiameter ofbase mm

Free fallheight mm

Weightapprox. kg

33-T0075/E 50.0 ± 0.05 305 ± 3 3.6

33-T0076/E 50.0 ± 0.05 457 ± 3 6.3

ModelRammermm dia.

Free fallheight mm

Weightapprox. kg

33-T0075 50.8 305 3

33-T0076 50.8 457.2 5.3

ASTM proctor moulds and EN rammers

CBR MOULDS AND ACCESSORIES

STANDARDS: ASTM D1883; AASHTO T193

A range of moulds and accessories specifically designedto meet the requirements of the relevant standards. The

equipment is manufactured from high quality, long-lastingmaterial and with regular maintenance will give years ofsatisfactory performance.

ModelInt. dia.

mmInt. height

mmWeight approx. kg

33-T0070 101.6 116.4 5.1

33-T0071 152.4 116.4 7.5 Model Description

34-T0090CBR mould complete with collar and perforated baseplate. Plated steel, 6 in. (152.4 mm) dia. x 7 in. (177.8mm) body height

34-T0091Spacer disc with "T" handle.515/16 in. dia. (150.8 mm) x 2.416 in. (61.4 mm) high

34-T0094 Annular surcharge weight, 2.27 kg

34-T0095 Slotted surcharge weight, 2.27 kg

34-T0098 Cutting edge

34-T0097 Solid CBR base

34-T0099 Straight edge. 3x30x300 mm

ASTM CBR Mould

ASTM, AASHTO, UNE, UNI, CNR version

34-T009034-T0091

34-T0094

34-T0098

34-T0097 34-T0095

34-T0099






33

CBR TEST MACHINE

CBR Test Apparatus is suitable for test of soils and mixmaterials (the grain size of the soil is less than 40mm)compacted with CBR mold so as to confirm the bearingloading ability of pavement, roadbed subcrust as well asmaterial layer of the roadbed to be designed. It consists ofa twin column frame, proving ring, penetration bar, loadingplate, micrometer, measuring device for swell increment etc.and easy to operate.

CTM-01 CBR Test Machine

CBR Test Machine

PLATE BEARING TEST APPARATUS

STANDARD:

ASTM D1194, D1195, D1196 – BS 1377:9 –CNR NO. 92 AND

NO. 146 – DIN 18134

These test methods are used to estimate the bearingcapacity of a soil under field loading conditions for aspecific loading plate and depth of embedment (ASTMD1194) but also for load tests of soil and flexible pavementcomponents for use in evaluation and design of airport andhighway pavements (ASTM D1195, D1196; BS 1377; CNRNo. 92 and No. 146; DIN18134). We propose a completerange of plate load testing equipment conforming to thedifferent standards.

The apparatus can be easily converted conforming tomethod "b" - three dial gauges-removing the housing forcentre dial gauge anvil and requiring other two dial gauges30x0.01 mm with two dial gauge supports.

CTK-3 Plate bearing test apparatus

Model: CTM-01

Capacity: 30 KN, 50KN (selectable)

Load speed: 1.0 mm/minPenetration bar: dia. 50 mm x 100 mm

Platen: dia. 170 mm

Platen travel: 50 mmMold: dia. 152 mm x 170 mm

Dimension: 310 x 310 x 930 mmWeight: 100 Kg

Model: CTK-3

Load plate diameter: 300 mmJack load capacity range: 0-100 kN

Jack Stroke: 160 mm

Measuring bridge span: 3000 mmHand pump rated pressure: 60 MpaStress test range: 0-25 MpaDisplacement measurement range: 0-10 mm

STANDARD:

BS 1377, 1924; EN 13286-47;ASTM D1883; AASHTO T193

Plate bearing test apparatus







DYNAMIC PENETROMETERS

Penetrometers are used to establish the thickness ofdifferent stratifications when investigating the suitabilityof a site for bridge, road and other construction works.In general if the ground is not too compact, penetrationtests with the lightweight penetrometer can be carried outto depths of about 8 to 12 m. This apparatus is suppliedcomplete with No. 11 sounding rods, No. 1 grooved rod, No.2 drive points 90°:500 and 1000 mm2, lifting device for sounding rods,couplings and carrying case.

Heavyweight dynamic penetrometer.

Hand operatedTP-P2

Weight of hammer: 63.5 Kg

Lightweight dynamic penetrometer.

Hand operated

TP-P1 Lightweight dynamic penetrometer.

Weight of hammer: 10 Kg

Drop height: 500 mm

Max. penetration depth: 6000 mmPenetration rammer extent: 60°Penetration rammer anglemax. diameter:

40 mm

STANDARD:

DIN 4094

Left: TP-P1; Right: TP-P2

AUGER POWER HEAD

Used in conjunction with sampling tubes to obtain disturbedor undisturbed samples of soils. The augers are not includedand have to be ordered separately. (See accessories)

ModelDrilling hole dia(mm)

Drilling hole depth(mm)

Weight(kg)

APH-01 30, 40, 50, 60 500-700 11-12

APH-02 80, 95 500-700 14-15

APH-03 120, 150, 180,

200, 250, 300

500-700 14-22

APH-03 auger power head

Auger power head

Accessories for both models

Auger:30, 40, 50, 60, 80, 95, 120, 150, 180, 200, 250, 300mm dia.selectable;500, 650, 700, 800, 900, 1200, 1400mm length selectable.

Note: It can be equipped with different diameter andlength of augers according to the user's requirements.






35

CONSOLIDATION TEST UNIT

WG-1C Triplex Consolidation Apparatus is used forcompression test of soil, and to determine the relationshipbetween deformation and compression of soil, to calculatethe unit sediment compression index, resilient index, as wellas consolidation coefficient of soil, etc.

STANDARD:

ASTM D3080, BS 1377:7, AASHTO T236

NF P094071-1/2

Model: WG-1C

Frame: Steel structure

Sample area: 30 cm² or 50 cm²

Sample'squantity:

Three

Lever ratio: 12: 1 (mid and low pressure)Consolidationcontainer:

One beam, two beams, three beams

Pressurerange:

12.5 kpa/30cm² to 800 kpa/50cm²,12.5 kpa/30cm² to 400 kpa/50cm²

Grade: Grade 8, grade 7Loadlevel(kpa):

12.5, 25, 50, 100, 200, 300, 400, 800,1600, 3200

Model: GDG-4S

Sample area: 30 cm² or 50 cm²Sample's quantity: Three

Pressure range: 12.5~3200kpa, 12.5~1600kpaGrade: 10, 9 gradeLoad level(kpa): 12.5, 25, 50, 100, 200, 300, 400, 800,

1600, 3200

Model: WG-1B

Sample area: 30 cm² or 50 cm²Sample's quantity: Three

Pressure range: 12.5~160kpa, 12.5~800kpaGrade: 9, 8 gradeLoad level(kpa): 12.5, 25, 50, 100, 200, 300, 400, 800,

1600, 3200Triplex Consolidation Apparatus

Model Weight (Kg)NS-15-5.1 5.1NS-15-2.55 2.55NS-15-1.7 1.7NS-15-1.275 1.275NS-15-0.85 0.85NS-15-0.637 0.637NS-15-0.425 0.425NS-15-0.319 0.319NS-15-0.212 0.212

Weights for Consolidation Test or

Drectly Shear Test soil test

Weights for Consolidation Test or Directly ShearTest

GDG-4S Triplex Consolidation Apparatus

WG-1B Triplex Consolidation Apparatus

WG-1C Triplex Consolidation Apparatus







Model: WG-4

Sample area: 30 cm²Lever ratio: 1:20Pressure range: 12.5~400kpaWeight: 20 Kg

Model: YYW-2

Max. axial load: 0.6 KNDiameter of remolding cylinder: Ф39.1 mmSample dimension: Ф39.1×80 mmJourney of the rotate wheel liftbridge in a circle:

0.2 mm

Rate: 2.4 mm/min

The longest journey of the ratatewheel lift bridge: 30 mm

Weight: 110Kg

CONSOLIDATION TEST UNIT(CONTINUED)

Single Consolidation Apparatus

Features: Small in size, lightweight, suitable for use on thespot.

KO Consolidation Apparatus(include pull rod)

Full Automatic Pneumatic ConsolidometerFeatures: computer-controlled, print curve chart

Strain Controlled Unconfining Compression

ApparatusIt is usde to determine the unconfined compressivestrength and the sensitivity of soft clay of stronger

saturation.

WG-4 Single Consolidation Apparatus

GJY KO Consolidation Apparatus

GDZ-1

YYW-2

Sample dimension: Ф61.8×40 mm Axial load: 6KNLoad arm: 0KPa-1000KPa Axial movement: 0-10mmWork temperature: 20oc±5oc

Relative humidity: <85%Relative error of proving ring: ±2%

Model: CJY

Low Mid. pressure:Relative error:

0~1600Kpa≤100KPa±1

High pressure:Relative error:

0~3200Kpa≤100KPa±1

Zero precision: ≤1.0KpaLoad time <1 secondMeasure range of Sensor:Resolution:Precision:

10mm<2.5um≤0.2%F.S

Model: GZQ-1






37

DIRECT SHEAR TEST MACHINE

TP-ES Electric shear test machine

TP-DS Digital shear test machine

STANDARD:

ASTM D3080, BS 1377:7, AASHTO T236

NF P094071-1/2

Model: TP-ES

Soil sample area: 30 cm2

Lever ratio: 1:12

Vertical Loading (kpa): 50, 100, 200, 300, 400Max. horizontal loading: 1.2 kNShear rate: 0.8 mm/min, 2.4 mm/min

Model: ZJ,DSJ-3(quadruplet)Vertical load: 100KPa. 200KPa, 300KPa

400KPaLever ratio: 1:12Shear box quatity: 4Level shear force: Max. 1.2KNSample area(cm): 30 x 2 HRate(mm/min): 2.4, 0.8, 0.1, 0.02Power: <100WPower source: 220V±10%, 50HzDimension(mm): 680 x 740 x 1050(LxWxH)Weight: 200 Kg

MODEL: TP-DS

Soil sample area: 30 cm2

Lever ratio: 1:12

Vertical Loading (kpa): 50, 100, 200, 300, 400Max. horizontal loading: 1.2 kNShear rate: 0.8 mm/min, 2.4 mm/min

Model: ZJ,DSJ-3(quadruplet)

To determine the shearing strength of the soil using thedirect shear apparatus.

In many engineering problems such as design of foundation,retaining walls, slab bridges, pipes, sheet piling, the valueof the angle of internal friction and cohesion of the soilinvolved are required for the design. Direct shear test isused to predict these parameters quickly. The laboratoryreport cover the laboratory procedures for determiningthese values for cohesionless soils.

Strain controlled direct shear machine consists of shearbox, soil container, loading unit, proving ring, dial gauge tomeasure shear deformation and volume changes. A twopiece square shear box is one type of soil container used.

A proving ring is used to indicate the shear load taken bythe soil initiated in the shearing plane.







Model: ZJ, ZQB-4 (light weight and portable)

Model: AS-1 (Cross board)Model: ZYY-3

Soil sample area: 30cm2

Vertical load: 5 0KP a,10 0KP a . 200 KP a ,300KPa, 400KPa(hanger is firstgrade)

Lever ratio: 1:20Level shear force: Max. 1.2KNSample area(cm2 ): 30Power source: 220V±10%, 50HzDimension(mm): 850 x 550 x 1100(LxWxH)Weight: 40 Kg

Cross board dimension: Ф75×150 mm,Ф50×100 mmSteel ring torsion: 80N mTorsion accuracy: 0.55N mGuide rod: Ф30 1040mmDimension(mm): 430 x 910 x 220 (LxWxH)Weight: 40 Kg

Vertical load: 40 0KPa,30 0KPa. 200KPa,100KPa, 50KPa

Lever ratio: 1:12Max load: 1.2KNSample area(cm2 ): 30Soil sample containerquantity:

12, sample 36 at the same time

Dimension(mm): 760 x 880 x 1100(LxWxH)Weight: 220 Kg(include weigths

Model: ZJ, ZQB-4(light weight and portable)

Model: AS-1Model: ZYY-3

DIRECT SHEAR TEST MACHINE(CONTINUED)

Model: ZJ, EDJ-1, SDJ-2(twp-speed and three-speed)

Model: ZJ, EDJ-1, SDJ-2 (Electric,twp-speed and three-speed)

Vertical load: 5 0KP a,10 0KP a. 2 00KP a ,300KPa, 400KPa

Lever ratio: 1:12Level shear force: Max. 1.2KNSample area(cm2 ): 30Power source: 220V±10%, 50HzDimension(mm): 850 x 550 x 1100(LxWxH)Weight: 40 Kg






39

Model: TSZ10-1.0

Sample dimension: Ф39.1×80 mm

Max load: 10KnStrain rate: 0.016-1.6mm/min.

six-speed mechanicaltransmission

Table stroke: Max. 50mmConfining pressure: 0-1MpaBack pressure: 0-0.6MpaHole pressure: 0-1MpaVolume change:

Graduation:

0-25ml

0.1ml Axial displacement: 0-30mmPower: 220V±10%, 50HzMachine dimension: 350 x 300 x 1100 (LxWxH)Controller Dimension(mm): 500 x 500 x 925 (LxWxH)Weight: 170 Kg

Model: TSZ30-2.0

Sample dimension: Ф39.1×80 mm,Ф61.8×125 mmMax load: 30KnStrain rate: 0.0024-4.5mm/min.

sixteen-speed mechanical

transmissionTable stroke: 0-90mmConfining pressure: 0-1MpaBack pressure: 0-0.6MpaHole pressure: 0-1MpaVolume change:Graduation:

0-25ml0.1ml

Axial displacement: 0-30mmPower: 220V±10%, 50HzMachine dimension: 350 x 300 x 1100 (LxWxH)

ControllerDimension(mm):

500 x 500 x 925 (LxWxH)

Weight: 175 Kg

Model: TSZ-1, TSZ-1A, TSZ-2, TSZ-6

Sample dimension: TSZ-1,TSZ-1A:Ф39.1×80 mm,TSZ-2:Ф39.1×80 mm, Ф61.8×25 mmTSZ-6:Ф39.1×80 mm,Ф61.8×25 mm,Ф101×200 mm

Shearing rate: 0.0001-2.4mm/min.0.0001-4.8mm/min

Confining pressure: 0-2MpaBack pressure: 0-2Mpa,

TSZ-1A without back pressureHole pressure: 0-2.0MpaVolume change:Graduation:

TSZ-1, TSZ1A, TSZ-2: 0-50mlTSZ-6: 0-100ml

Axial displacement: 0-30mm Axial load: TSZ-1, TSZ-1A: 0-10KN

TSZ-2: 0-30KN, TSZ-6: 0-60KN

Model: TSZ10-1.0

STRAIN CONTROLLED TRIAXIAL TEST APPARATUS Full-automatic Strain Controlled Triaxial Test Apparatus

TSZ-1A

TSZ-2

TSZ-6







STANDARD: BS 1377:3, ASTM D1067

PH METERS

TP-601A pH meter

TP-6022 PH meter

TP-6658 Ph meter

Model: TP-601A

Display: LCD, size : 20 mm x 27 mm. Consumption

Measurement Range: pH 0 to 14 pHResolution: pH 0.1 pH.

Accuracy: pH -/+0.1 p After calibration. pH 4.01, pH6.86 and pH 9.18, Three Point Calibration

pH Calibration: pH 4.01, pH 6.86 and pH 9.18, Three PointCalibration

Temp. Display: 0.1oCTemp. Accuracy: 1oCWorking Temp. Range: 0 ~ 50oC ATC: 0 ~ 100oCDimension: 188 x38 mm * Meter with pH electrode.Weight: 82 g (electrode included).

Model: TP-6022

Display: LCD, size : 20 mm x 27 mm. Consumption

Measurement Range: pH 0 to 14 pHTemp. 0 to 50 oC ( 32 to 122 oF ).

Resolution: pH 0.01 pH.Temp. 0.1 oC/ 0.1 oF.

Accuracy: Accuracy pH+/- 0.02 p After calibration.Temp. +/- 0.8 oC/ +/- 1.5 oF.

pH Calibration: pH 6.86, pH 4.01 or pH 9.18, 3 pointscalibration.

Operating Humidity: Less than 80% RH.Dimension: 88 x38 mm * Meter with pH electrode.Weight: 82 g (electrode included).

Model: TP-6658

Power supply: AC 220V(160-250V)50Hz

Power unit: <5W Accuracy: 0.01PH 1mVMeasurement range: 0~14PH -999mV~999mVSet point: 2

Environmental temperature: 0~50oCDisplay: Four-level LED LCD instructionsEnvironmental humidity: 35-85%RHParameters preservation: 10 yearsOutput model: ON/OFF 4~20mA Output capacity: Output capacity

AC 250v/3A DC30V/3A Input impedance: >1012ΩInsulation R: >10MΩSize: 96mmX96mmX120mm

pH meter is an electronic instrument used to measurethe pH (acidity or alkalinity) of a liquid (though specialprobes are sometimes used to measure the pH of semi-solid substances). A typical pH meter consists of aspecial measuring probe (a glass electrode) connected toan electronic meter that measures and displays the pHreading.




Asphalt testing ASPHALT TESTING


41

CENTRIFUGE EXTRACTORS

STANDARD: EN 12697-1 CLAUSE B.1.5

ASTM D2172, AASHTO T164A

AUTOMATIC EXTRACTION APPARATUS

STANDARD: EN 12697-1, DIN 1996,

ASTM D2172, CNR A. VII NO. 38

Used for the separation and extraction of bitumen byuse of solvent and sieving, for the separation of filler bycentrifuge action and for the recovery of solvent material.The complete cycle is carried out automatically.

The centrifuges are used for the determination of bitumenpercentage in bituminous mixtures. All models comprise a removable precision-machined rotorbowl housed in a cylindrical aluminium box.The rotating unit is suspended on the base by fourcalibrated springs, which assure a perfect stability all overthe test. The cover is precisely machined and fitted withsolvent resistant gasket to avoid leakages. All models arefitted, for emergency use, by a hand brake system. Thecontrol panel includes: Start/Stop button, speed controlknob.

AE-CT5 Automatic extraction apparatus

AE-SYV Automatic extraction apparatus

CE-3000 Centrifuge extractor CE-1500 Centrifuge extractor

Model: CE-1500, CE-3000 Centrifuge extractor

Voltage: 220 v±10%Speed adjustable range: 3000 r/minPower of motor: 370 w-550 wMax weight of specimen: 1500 g and 3000 gOrifice ring capacity: 4200 mlDimension of filter-paperExternal diameter: 295 mmInternal diameter: 95 mm

Model: AE-SYV Automatic extraction apparatus

Capacity: 1000 g-2000 g

Accuarcy: <0.1%

Take out and lift time: 20-40 min/each time

Reclaim menstrumm automatically, reclaim rate >95%

Voltage 380 V±10%

Motor power: <5 kw

Net weight: 300 Kg

Dimension: 1450×660×1580mm

Model: AE-CT5 Automatic extraction apparatus

Working voltage: 380 v±10%Motor power: 1.5 kW

Each times take out and lift time: 40 minEach times take out and lift requiremenstruum:

10L

Acentric machine specimen cup: Dia.120 mm

Centrifuge extractor Automatic extraction apparatus







ELECTRIC COMPACTOR

This equipment is used for the preparation specimens forMarshall stability testing in compliance to BS 598 standard.

The Digital controlled Marshall Electric Compactor issuitable for preparing bituminous mix specimens (dia.101.6mm x 63.5mm) used in Marshall stability testing. Thetrip mechanism is designed to make the hammer fall atthe same distance for every stroke. With some featuresof digital control, stroke times to be preset freely, autocounting and easy to operate etc.

Marshall compactor

EDC-2 Marshall compactor

MODEL: EDC-2

Hammer weight: 4.536Kg±0.009 Kg

Hammer head: dia. 98.5 mm

Drop: 457.2mmStroke frequency: 60 stroke times per minute

Dimension: 540 x 500 x 2000mmWeight: 90Kg

EDC-1 Multifunctional compactor

Multifunctional compactor

MODEL: EDC-1

Heavy-duty compacting test: hammer weight 4.5kgdrop height 450mm

Light-duty compacting test: hammer weight 2.5kgdrop height 300mm

Specimen cylinder dia.: dia. 100,152 mm

Hammer head dia.: dia. 50 mmCompacting number: 30 times/minEngine: 370 W, 380 V, 1400 r/minDimension: 650×400×1320 mmWeight: 130 Kg

It is suitable for the foundation engineering constructionsuch as water conservancy dam, traffic, railway, airportand building etc. With standard compaction method todetermine the relationship between density and water ratio,then confirm the dry density and moisture content of soil.It could satisfy the specimen preparation requirements ofCBR tests and resilience modulus tests. It could providesand module and spodosol module of dia. 152 and dia. 100It could perform light compaction and heavy compaction.With perfect designation, it has lots of specialties such asdigital display, auto number and auto circulation etc.






43

LOS ANGELES ABRASION MACHINE

Los angeles abrasion machine

STANDARD:

EN 1097-2, ALSO CONFORMING TO NF P18-573, UNE 83

114, UNI 8520-19, CNR NO. 34,

ASTM C131

EL42-5305/01 Los angeles abration machine consists ofa rolled steel drum having an inside diameter of 711 mmand internal length 508 mm. The drum is rotated by aspeed reducer driven by an electric motor at a speed ofbetween 31 and 33 r.p.m. The machine is equipped withan automatic counter, which can be preset to the requirednumber of revolutions of the drum. The unit is supplied

without the abrasive charge, which has to be orderedseparately depending on the standard in use.

Abrasive charges: Set of 12 abrasive charges

conforming to ASTM/UNI/CNR Standards;Set of 11 abrasive charges conforming to EN

Standards

GYRATORY COMPACTOR

STANDARD: NT BUILD 427

GCF-150 Gyratory compactor

Model: GCF-150

Vertical load: continuously adjustablefrom 100 to 1000 Kpa

Pressure accuracy: <±60 Kpa

Number of compaction: from 1 to 5

Number of gyratory: adjustable up to 500

Gyratory compact ion angleaccuracy:

<0.02°

Gyratory compactiondisplacement range:

0-300 mm

Gyration rate: 30±0.5 cycles/minMotor nominal speed: 1800 cycle/min

Overall height: 190 cmWeight: 370 kg

Mould weight: 7.4 kg

EL42-5305/01 Los angeles abration machine







DETERMINATION OF CONSISTENCY


Sand absorption cone and tamperCone and tamper manufactured according to thespecifications and is also used in determining the specificgravity and absorption of fine aggregates.

48-D0440 Sand absorption cone and tamperSA-C Cone weight: 250 gSA-T Tamper weight: 200g

Test the plasticity of lubricating grease and the hardness ofbitumen.Main structure:1. A set of lights, control circuit inside the base, time displayand penetration display windows and function keys on thepanel.2. Needle rod releaser3. A movement knob on the left of releaser.4. Shift sensor

Model: CT-A

Time Setting: 5-30s

Max needle penetration: 500Displace measure range: 0-30mmMeasuring accuracy: ±1%(0 - 10mm); ±10%(10.1 -

30mm)

Standard needle: 2.5±0.05gSample vessel: dia. 70mmPower supply: 220VAC 50HzPower: 25W Max

PENETROMETER

AUTOMATIC PENETROMETER

CT-A AUTOMATIC PENETROMETER

48-D0440

P.R.D. SPLIT MOULD AND BASEPLATE

Used to determine the degree of compaction of asphalt for

road pavement quality control testing. The unit consists ofa mould split vertically on one side together with a clamp-attached baseplate. Plated for protection against corrosion.

76-B0088 PRD Split Mould and Baseplate

76-B0088 PRD Split Mould and BaseplateInt. dia: 152mm Height: 160mmWeight: 10.9 Kg






45


PAVEMENT CORE DRILLING MACHINE(CONTINUED)

TPD-Q20 Core drilling machine

TPD3-250 Core drilling machine

TPD-Z110 Core drilling machine

Max Dia of drilling: 200 mm

Max depth of drilling: 400 mm-700 mm

Rotate speed: 800-1200 r/min

Power: 3.3 Kw

Weight: 130 Kg

Dimentions: 1080×780×1150 mm


Rotate speed: 700/1200 r/min

Power: 2.2 Kw 380 V

Weight: 50 Kg



Power: 1.4 Kw 220 V

Weight: 6 Kg

TPD-Q20 Core drilling machine

Auxiliary power : 6.5 hp

Depth of conventional drilling: 350 mm


Drilling vertical downward direction.

Mode of operation:manual feed, relying on self-

respect down the sampling

Drilling diameter: 150 mm below

Coring Time:4-5 minutes to get 230 mm

cement concreteMax capacity of Water tank: 140 liters

Weight: 350 Kg

Dimentions: 1430 × 1150 × 1200mm

TPD-100 Core drilling machine

TPD-100 Core drilling machine

TPD-Z110 Core drilling machine TPD3-250 Core drilling machine







SKID RESISTANCE AND FRICTION TESTER

Skid resistance and friction tester

STANDARD:

EN 13036-4(ALSO CONFORMING TO EN 1097-8, ASTM

E103)

This method provides a measure of the skid resistanceproperties of a surface either in the field or in the laboratory.This method measures the skid resistance of a small areaof a surface (approximately 0.01 m2 ) and this should beconsidered when deciding its applicability to a pavementsurface which may have variable surface characteristics, e.g.block paving.

DUCTILITY TESTING MACHINE

STANDARD: ASTMD113

TD-508 A/B Ductility testing machine

Test the length of asphaltum when asphaltum is drawn tobreak under certain temperature and speed.

Accessories

It is made of brass, accurately machined to the

specified dimensions.

Ductility mould and ductility mould plate


Specification

Rocker weight: 1500±30 gDistance between rocking centre andcenter of gravity:

410±5 mm

Positive static pressure on pavement: 22.2±0.5 kN6 rubber slider and base plateOverall weight approx: 12 Kg


Testing Range: Model A: 1.5mModel B: 2m

Temperature controlrange:

Ambient~50, adjustable

Temperature control

accuracy:

±0.5

Test accuracy: ±1 mmStretch speed: 50±2.5 mm/minTemperature and ductility are controlled bymicroprocessor, access data and calculate results.Power supply: AC 220V ±10 % 50 Hz

48-B0190 Skid resistance and friction tester

48-B0190 Skid resistance and friction tester






47

DUCTILITY TESTING MACHINE(CONTINUED)

TD-508G Low Temperature ductility testing machine

Ductility testing machine

The instrument is used to test the length of the asphaltunder regulated conditions and temperature when it is just broken by pulling at a certain speed, viz. ductility. Asper ASTM D133, and unit is “cm” Driven by double poles,that ensures pulling stably and synchronically. Systemof the ductility test is controlled by SCM, digital display.Microprocessor records automatically and calculates theaverage.

It integrates achievements of domestic and overseas designconcepts on ductility tester. It is advanced and delicate.There is no thread rod, guide rail and other device in thetest trough, so it is convenient to install test sample.Equipped with newly designed driving parts, it is stable andsynchronous without shake during dragging procedure. Thedragging speed is uniform and the ductility is accurate.It can make determination for ductility of 3 pieces ofsamples and dragging force of 2 pieces of samples at thesame time. It adopts computer control techniques, so it iswith high temperature controlling accuracy.

Specifications

TD-508C, TD-508D Ductility testing machine

Power supply: AC 220 V (-5%~+10%), 50 Hz

Measurement range: TD-508C:1.5 m (±10mm),TD-508D:2.0 m (±10mm)

Heating type: by an electric heaterHeating power: TD-508C: 3000 W,

TD-508D: 3200 WBath circulation: by a magnetic circulation pumpTemperature controllin range: 5~49; digitally displayedTemperature controlling

accuracy:

±0.5

Dragging speed: two grades, 10 mm/min and 50mm/min

Measurement accuracy: ±1 mmDuctility display: Controlled by microprocessor,

digitally displayed after dataprocessing

Refrigeration type: by a compressor,TD-508C: input power is 950 WTD-508D: input power is 1200 W

Ambient temperature: -10~+35Relative humidity: ≤85%Total power consumption: TD-508C: not more than 4100 W,

TD-508D: not more than 4500 W

TD-508G Ductility testing machine

Power supply: AC 220 V (-5%~+10%), 50 Hz

Measurement range: 2.0 m (±10mm)

Heating type: by an electric heaterHeating power: 3200 WBath circulation: by a magnetic circulation pumpTemperature controlling range: 5~50; digitally displayedTemperature controllingaccuracy:

±0.1

Dragging speed: two grades, 10~50 mm/min,frequency conversion steplessadjustable

Measurement accuracy: ±1 mmDuctility display: Controlled by microprocessor,

digitally displayed after dataprocessing

Dragging force measurementrange:

0~300 N

Dragging force accuracy: ±1N;Display resolution: 0.1 NData output: 1) Communicate with a computer

through a RS232 port2) Printed out by a micro-printer

Refrigeration type: by a compressor; input power is800 W

Ambient temperature: -10~+35Relative humidity: ≤85%Total power consumption: not more than 4000 W

TD-508C, TD-508D Ductility testing machine







MARSHALL STABILITY TESTER

STANDARD:

ASTM D1559, AASHTO T245, NF P98-251-2,

CNR NO. 30, ASTM D5581 (6” DIA. SPECIMENS)

AUTOMATIC RING AND BALL APPARATUS

STANDARD:

EN 1427, ASTM D36

Introduction

This advanced microprocessor controlled automatic testeris used to determine the softening point of bitumen using,as heating fluid, water or glycerol. The softening point istaken by two light barriers suitably positioned and thetemperature measured by a PT100 sensor placed in amiddle position. During operation a magnetic stirrer withadjustable speed assures temperature uniformity in thevessel.The temperature gradient is strictly maintained throughoutthe test by the electronic system conforming to the

standards.

TD-806E TD-806GTD-806H

It is used to test the temperature of asphaltum whenasphaltum softens and drops 25mm under the heatingconditions.Computer-controlled temperature rising speed, datachecking, data saving and data processing.

76-B0038/CB Mashall stability tester

Test speed: without load: 50±2mm/min with load: 50±5mm/min

Max.load: 50kN

Accuracy: ±1%Specimen size: dia. 152.4×95.3 mm

dia. 101.6×63.5 mmPower: 380V 50Hz 550WNet weight: 205kgDimensions: 770x530x950mm

TD-806E Automatic ring and ball apparatus

Diameter of Steel Ball: 9.53mm

Weight of steel Ball: 3.5±0.05g

Heating container: 1000mlCalefactive speed: 5±0.5 /minTemperature measure Range: 5~90Paking size: 380x290x360mmGross weight: 6KgNet weight: 3Kg

76-B0038/CB






49

Type 82 Asphalt oven

AUTOMATIC RING AND BALL APPARATUS (CONTINUED)

This instrument is suitable to the standards of GB/T5304,T0610-1993. Test the loss of quality of asphaltum rotatingpellicle oven after heating and value the aging capability ofasphaltum.Stainless steel lumen; Computer controlled temperaturetesting; Digital displays, Flowmeter tests wind volume.

STANDARD: ASTMD2872

ASPHALT OVEN

TD-806H Automatic ring and ball apparatus

Determinate samplequantity every time:

4 ps

Power supply: 220V(+10%, -5%) 50Hz AC

Working surroundings: room temperature is less35

Determinate range: S amp le s o f ten ing po inti s be low 80, dist i l ledwater as heating medium,+5.0～+80

Sample softening point is more than 80, glycerol asheating medium, +32～+160 Temperature distinguish: 0.01

Stirrer: Stirring speed adjustablecontinuously

Heating speed: Adjusted to 5.0±0.5 / minafter 3 min

Softening point solution: LCD display, printer printHeating power: 600 WPacking size: 480x360x600 mmGross weight: 18 KgNet weight: 12 KgWith RS-232C communication port

Specifications

TYPE 85 Asphalt oven

Rotating Speed of Sample Shelf: 15±0.2 r/min

Whiff Flux: 4±0.2 l/minSample in one time: 8Working Temperature: 163±0.5Power: 3.5 kWTiming range and accuracy: 85 min±1 min

TYPE 82 Asphalt oven

Power: 220V

Control accuracy: 163 ± 1

Rotating Speed of Sample Shelf: 5.5 r/ minFor each test: 5.25 hStudio Size: 430 × 410 × 450 mmSample in one time: 4

TD-806G Automatic ring and ball apparatus

Measure range: 5~80 32~160Calefactive speed: 5±0.5 /minDiameter of steel Ball: 9.53 mmWeight of steel Ball: 3.5±0.05 gVolume of heating container: 1000 mlPacking size: 480x360x600 mmGross weight: 19 KgNet weight: 14 KgComputer-controlled temperature rising speed,automatically data checking, data saving and dataprocessing or RS232.

Type 85 Asphalt oven





Cement testingCEMENT TESTING


SOUNDNESS OF CEMENT

Strictly conforming to EN standard. Individually checked,supplied complete with certificate of conformity.EL38-3005 weight approx: 30 g

STANDARD VICAT APPARATUS

Vicat test set. EN method

Used for determination of setting time and consistency ofcement by Vicat Method. The apparatus consists of a metalframe with a sliding rod. An adjustable indicator moves overa graduated scale. The needle or plunger is attached to thebottom end of the rod to make up the test weight of 300g.The frame is supplied without accessories, which have tobe ordered separately depending on the requirement.

63-L0028 Vicat test set Weight approx.: 4 kg

Comprising Vicat frame

Vicat mould Consistency plunger 10 mm dia.

Supporting glass plate

Initial needle 1.13 mm dia.Final needle 1.13 mm dia.

JOLTING TABLE

Jolting table

This machine consists of a mould table seated on arotating cam driven at 60 revolutions per minute. The

apparatus is supplied with mains switch box, push buttonstart/stop control, and automatic stop control at end oftest.

EL39-1150/01 Jolting table

Vibration part of the total weight: 20 ± 0.5 kg Amplitude: 15mm ± 0.3 mm

Vibration frequency: 60 times/60 seconds±1second

Power supply voltage: 220 V 50 Hz

Le Chatelier mould

EL38-3005 LE CHATELIER MOULD

EL39-1150/01 Jolting table

63-L0028 Vicat test set






51

STANDARD:

BS 3892-1, 4551-1, EN 196-1, 413-2, 459-2,

1744-1,1015-10,11, ISO 679 EN 13454-2.

Three gang mould for prisms 40 x 40 x 160 mm madefrom steel. The mould is used for casting specimens ofcement aggregate combinations for measuring the potentialexpansive alkalireactivity.The effective gauge length is made of mild steel and hasaccurately machined faces. The parts of the moulds aretight fitting and firmly held together when assembled.Supplied complete with base plate and four stainless steelor brass smooth reference pins.

SM-C41B

PRISM MOULDS

Three gang mould

SM-C41C


SM-C41A 40 x 40 x 160 9.2

SM-C41B 40 x 40 x 160 12

SM-C41C 40 x 40 x 160 10

PREPARATION OF MORTAR CUBES

Three gang cube mould

STANDARD:

ASTM C87, AASHTO T71

Machined out of High lead naval brass, this three gang2" x 2" cube mold makes 3 compression test cubes atonce. This mold casts cubes in a diagonal arrangement witha detachable brass base plate.Wing nut clamps lock the mold to the base while stainlessthumbscrews secure halves tightly together. Large screedoff upper surface area makes this mold a preferredchoice. Optional accessories include an all brass fittedtop, or a cover plate designed to pour molten sulfurcapping compound down through taper holes for testingcompressive strength.

PM-BS50 brass three gang cube mould

EL39-0410 cast iron three gang cube mould


PM-BS50 2" x 2" cube mould 8.4

EL39-0410 50×50 cube mould 6.5

SM-C41A







CONE PENETROMETER METHOD

Cone Penetrometer

STANDARD: BS 1377, 1924-2, EN DD ENV 1997-2

The method is fundamentally more satisfactory thanthe Casagrande method as it is essentially a static testdepending on the soil shear strength. The test is basedon the relationship between moisture content and thepenetration of a cone into the soil sample under controlledconditions.

Specification

Dial indicator: 150 mm diameter, indicator pointincorporates friction/gear system

Heightadjustment:

Rapid,using integral clamping mechanism

Cone release: ManualCone: 1 x 30o, 150 mm test cone includedBase: casti iron, adjustable leveling feetWeight(approx): 20 kg

Penetration Test Cone Penetration Test Cup

Accessories

Test Gauge. For checking the condition of the

Cone Point. Weight 30 gPenetration Test Cup. 155 mm diameter by 150

mm deep, with the rim parallel tothe flat base.Weight 1600 g

Penetration Test Cone. Brass, 150 mm long with

smooth surface at an angle of 30o.Weight 100 g

COMPRESSION JIG

Specification

Distance between platens: 40 ± 0.1mmOverall Dimension: 100 dia. x 165mm

Weight approx.: 5kg

EL24-0540 Cone Penetrometer

EL24-0540 Cone Penetrometer

CJ-01 Compression jig






53

BULK DENSITY OF CEMENT

STANDARD: ASTM C91, C110

62-L0060 Apparatus is used to determine the bulk densityof cement as specified by the “Commission des méthodesd’essai des matériaux de construction”. It consists of asieve funnel, an unit weight measure 1 litre capacity, atripod, and straightedge.

Overall dimensions: 350x350x520 mmWeight approx.: 3 kg

AIR CONTENT METER

This modern meter utilizes the principle of Boyle's Law andconsists of a flanged cylindrical vessel and cover assembly

incorporating a pressure gauge air pump and valves. Thebase can also be used for unit weight measurement offresh concrete and aggregates. Supplied complete withcalibration set.

STANDARD:

EN 1350-7,BS 1881-106,ASTM C231

ACM-01 Air content meter ACM-02 Air content meter

62-L0060

Apparatus for the measurement of bulk density

of cement

Code ACM-01 ACM-02

Capacity (L): 7 1

Air content range 0-10% 0-50%

Accuacy

± 0.1%(0%-6% of aircontent);± 0.2%(6%-10% of aircontent)

± 0.1%

Dimension(mm) ~ 200 x 320

Weight(Kg) 10 4





Rock and aggregates testingROCK AND AGGREGATES TESTING


SAND EQUIVALENT SHAKER SPECIMEN GRINDING MACHINE

Used to grind and polish concrete specimens, naturalstones, ceramic materials, rock samples etc.The cubecylinder and core specemens can be easily locked on thetable and the grinding head 330 mm dia. can be radiallymoved either manually or automatically in both directionsso the only manual operation requested is the lowering ofthe grinding head by the top hand wheel. The machine issupplied complete with chip guard, coolant tank, motorpump, one set of abrasive sectors and instruction manual.Diamond grinding sectors are available on request.

NR-01 Specimen grinding machine is suppliedcomplete with clamping element for 100, 150 and 200 mmcubes. Clamping devices for cylinders are also available onrequest.

STANDARD: ASTM D4543

Motorised sand equivalent shaker Specimen grinding machine

NR-01 Specimen grinding machine

Spare parts

The motorized sand equivalent shaker features twoseparate electronic timers (one preset at 45 seconds andthe other preset at 10 minutes) to increase accuracy andease of operation compared to a spring-type timer. It isrecommended for samples in the laboratory.

Code Description

47-T0050/1 Measuring cylinder(ASTM)

47-T0050/1A Messuring cylinder(EN)47-T0050/2 Rubber stopper47-T0050/3 Measuring can47-T0050/4 Irrigator tube47-T0050/5 Siphon assembly with bottle47-T0050/6 Weight foot(ASTM)47-T0050/61 Weight foot(EN)86-D1546 Funnel82-D1694 Graduate rule, 500 mm47-T0050/10 Plastic case

STANDARD:EN 933-8

ALSO CONFORMING TO NF P18-598,

UNI 8520-15, UNE 83131, CNR NO. 27

Model: 47-T0056/B

Stroke: adjustable 203±1 mm

Rate: 180±2 strokes/minPower Supply: 220 VRated power: 90 WWeight: 45±1KgDimension: 564×320×360mm

Specification

Speed: 1400 r/min

Wheel Size: 250 × 30 × 32 mmMotor: AQ28024, 750 W, 380 V, 50 Hz

Dimension: 730 ×420 ×360 mmWeight: 70 kg

47-T0056/B Motorised sand equivalent shaker






55

STRAIN GAUGE

Introduction

The strain gauge is disport from two kinds. One is SZseries. Other is BX series. There are two different and usingthe different materials. One is paper basement, representedby Z letter. Another is aldehyde basement. According tointernational standars, name them as below:For example:S Z 120 – 5 AA B X 120 – 10 BA 1 2 3 4 5 1 2 3 4 5

1 represent sense organ material(S: wire wound; B: foil strain gauge)2 represent basement material(Z: paper based;X: acetal based; A: paper chromatography;

Q: impregnated based)3 represent resistance value, unit is Ohm.4 represent length of the strain guage, unit is mm5 represent configuration.(AA: uniaxial strain gauge; BA:biaxial 90o; BB: biaxial 90o ;BC: biaxial 90o overlaping; CA: triaxial 45o; CB:triaxial 45o

overlaping; CC: triaxial 60o;CD: triaxial 120o; DB: four-axle 45o /90o )

Specifications

Code no. Item Size(mm)BX-1 BX120-1AA 1x1BX-2 BX120-2AA 2x1BX-3 BX120-3AA 3x2BX-4 BX120-5AA 5x3BX-5 BX120-10AA 10x3BX-6 BX120-15AA 15x3

BX-7 BX120-20AA 20x3BX-8 BX120-30AA 30x3BX-9 BX120-40AA 40x3BX-10 BX120-50AA 50x3BX-11 BX120-60AA 60x5BX-12 BX120-80AA 80x5







ST-1 Open wire saw

SAMPLING TOOLS

DETERMINATION OF THE PARTICLE

ST-2 Wire saw

ST-3 Rimming knife

UNIT WEIGHT MEASURES

STANDARD: BS, ASTMConstructed in heavy gauge steel with two handles.

ACCELERATED POLISHING MACHINE

STANDARD: EN 1097-8, EN 1341, 1342, 1343

(PAVING STONES AND PAVING BLOCKS)

STANDARD: EN 1097-7, Also conforming TO BS 812,

NF P18-558

Used to measure the resistance of road stone to thepolishing action of vehicle tires on a road surface. Thismachine provides a method of preparing polished stonespecimens for use with the friction tester when used in alaboratory environment.

48-D0525 Accelerated polishing machine

Dimensions(L x W x H): 550x630x1600 mm(bottle fitted)Rated power: 400 WRoad wheel: 15 to 325 rpm Applied load onspecimens:

715 to 735 N

Feed rates Corn: emery 20 to 34 g/minWater: 20 to 34 ml/minFlour emery: 2 to 4 g/minWater: 5 to 8 ml/min

Code no. Capacity(L)

48-D0445/1 1

48-D0445/2 5

48-D0445/3 1048-D0445/4 15

48-D0445/5 20

48-D0445/6 30

Code no. Capacity(ml)

NR-07-5 5

NR-07-10 10

86-D1125 25

86-D1126 50

86-D1127 100

NR-07-250 250

NR-07-500 500

NR-07-1000 1000

NR-07-2000 2000

48-D0525 Accelerated polishing machine

Specific gravity bottles (Gay-Lussac type)Used to determine the specific gravity of fine soils. Glassbottle complete with capillary vent stopper.

86-D1125, D1126, D1127






57

AGGREGATE CRUSHING VALUE

STANDARD: BS 812-110, 111

The aggregate crushing value provides a relative measureof the resistance of an aggregate to crushing under agradually applied compressive load. Supplied complete withcylinder, plunger, base plate, tamping rod, and measure.

AC-150 Aggregate Crushing Value Apparatuscomprising

150 mm nominal diameter steel cylinder, plunger

and base plate. Weight: 16.6 kg

Metal Measure 115 mm diameter x 180 mm deep.Weight: 870 g

Tamping Rod 16 mm diameter x 600 mm long withrounded end.

AC-75 Aggregate Crushing Value Apparatuscomprising

75 mm nominal diameter steel cylinder, plunger

and base plate. Weight: 3.5 kg

Metal Measure 57 mm diameter x 90 mm deep.Tamping Rod 8 mm diameter x 300 mm long withrounded end. Weight: 350 g

AC-150, AC-75

DETERMINATION OF FLAKINESS AND ELONGATION

STANDARD: BS 812

EL42-0410 Flakiness Gauge constructed of heavygauge sheet steel to the dimensions specified in BS 812.

Weight: 60 g.

Flakiness Gauge

EL42-0410 Flakiness Gauge

EL42-0820 Length Gauge classifies aggregateelongation by measuring the length of individual particles. Aggregate particles are considered elongated when theirlength is more than 1.8 of their nominal size.

Weight: 480g

Length gauge

EL42-0820 Length Gauge





Drying SamplesDRYING,WEIGHING AND GRADING


General description

ELECTRIS THERMOSTATIC OVEN

Drying, heating, hot preservation, ageing ofcomponents, thermal tests in laboratories andindustries.200°C maximum or 300°C maximum (depending onthe option).Volumes: 27, 64, 125, 250, 343, 490, 686, 980 litres.

Internal fan for air circulation

All ovens are fan circulated models. The air flow speedsup the drying process and also evens the temperaturedistribution within the oven.The fan and heaters are in the rear of the oven, shieldedfrom the workspace by a stainless steel baffle.

Air is drawn into the fan from the centre of the oven andpasses over the temperature sensor and the sheathedheater elements. The heated air is distributed around thebaffle to both left and right and then re-circulated by thefan.

Oven's panel

oven's internal detail






59

Technical data

Ovens TU027 TU064 TU125 TU250 TU343 TU490 TU686 TU980

PerformanceTemperature range ambient + 10°C to 200°C or 300°C as an optionTemp spatial variation105°C±°C

< 1.2 < 1.2 < 1.2 < 1.2 < 1.2 < 1.2 < 1.2 < 1.2

Temperature fluctuation ±°C

< 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2

DimensionsWork chamber volume L 27 75 125 250 343 490 686 980

Internal width mm 300 400 500 500 700 700 700 1000

Internal depth mm 300 400 500 500 700 700 700 700Internal height mm 300 400 500 1000 700 1000 1400 1400External width mm 440 540 640 640 840 840 840 1140External depth mm 500 610 710 710 910 910 910 1015External height mm 570 670 770 1270 970 1270 1670 1670Shelves in stainless steelNumber standard / max 1/4 1/4 2/8 2/17 2/17 2/17 2/24 2/24Shelves dimensions(w x d) mm

270x270 470x470 470x470 470x470 670x670 670x670 670x670 970x670

Max load shelf / oven kg 30/60 30/60 30/60 30/120 30/120 30/240 30/240 30/240Number of door (s) 1 1 1 1 1 1 1 2Mass (empty) Kg 28 48 66 115 145 180 235 295

Electrical supply 50 Hz 230 Volts (1) above 4000 watts: 400 V tri + T + NMaximum power rating200° Watts

1000 1000 1000 1500 3000 4000 6000 (1) 9000 (1)

Max rating 300°C (option)Watts

1000 2000 2000 4000 5000 6000 (1) 9000 (1) 12000(1)

Factory options (must be specified at the time of ordering the main unit)OG9001 Extension of max temperature up to 300°C OP0014 Work chamber lighting 40 watts

OG9002 Outside casing also made of 304 stainless steel OG9006 Door windowOG9003 Inner case in 316L stainless steel OG9005 Air circulation variatorOG9004 Special colour for external casing (indicate RAL) OP0057 Additional thermocouple and connectorOP0038 Digital timer 0/99 hours with auto/manu selection OG9007 Additional safety thermostat class 2OG9008 Weekly automation with digital program timer OP0001 Sound alarmOP0049 Temperature profiler (4 programs of 16 segments each OP0041

OP0042

Additional access port diameter 40 mm & silicone cork Additional access port diameter 60 mm & silicone cork

OP0026OP0024

Air extractor 60 m3 /hour Air extractor 230 m3 /hour

OP0079OP0080

Air extractor 60 m3 /hour with variator Air extractor 230 m3 /hour with variator

OG9014OG9015

Temperature paper recorder 1 probeTemperature paper recorder 2 probes

OP0010OP0012

Calibration certificate 1 temperature 1 pointCalibration certificate 1 temperature 9 points

Accessories (can be ordered separately)

GA9001 Extra shelf 30 kg and supports GA9004 Stacking kitGA9002 Reinforced extra shelf 60 kg and supports GA9005GA9006

Sub-frameSub-frame with castors

GA9003 Stainless steel tray (20 mm depth) AC0011 AC0012

Silicone cork for access port diameter 40 mmSilicone cork for access port diameter 60 mm







HIGH TEMP OVENS

The high temperature ovens are easy to use and getfunctional and practical equipments together, at veryreasonable prices compared with furnaces.They are suitable for a large number of applications :burning, degassing, pre-heating, hardening, hot airsterilization, tests ... in many branches of industry. All high temperature ovens are strongly ventilated forthe accuracy and homogeneity of temperature in thevolume.

Low thermal mass insulation materials and strong powerrating have been used to achieve rapid heating.

Performances

Temperature up to 500°C.Temperature fluctuation is less than ± 0,2 °C .Temperature spatial variation is less than ± 2,5°C at 200°C(measure done with 9 probes inside the work chamber).

Construction

5 sizes of ovens are available from 75 to 686 liters.The inner casing is made of corrosion and heating resistantstainless steel, type 321. The outer case is made of sheetsteel, finished in a tough stoved epoxy paint. (colour lightgrey RAL 7035) No contact between inner and outer caseand an optimised insulation minimise heat transfer tothe ambient air and heat dissipation. Walls and door areinsulated with glass fibre. The insulation is 150 mm thick,this ensures efficicent operation, low external temperaturesand excellent thermal stability. A special gasket providesa good seal between the door and the oven body, aidinginsulation. The insulation as well as the gasket are asbestos-free. The door is hinged on the right hand side and closedwith a robust 2 points fastener.

Internal fan for air circulation

All ovens are fan circulated. The air flow speeds up theheating time and also evens the temperature distributionwithin the oven. The centrifugal blower is located at the topof the oven, shielded from the workspace by a stainlesssteel baffle. Air is drawn into the fan from the top in thecentre of the oven and passes over the temperaturesensor and the sheathed heater elements. The heated airis distributed in the bottom of the oven through the wholewidth and then re-circulated by the fan.

Exhaust air, fresh air supply

Through access vent, fresh air is provided and pre-heatedbefore entering the chamber. A 40 or 60 mm diameterexhaust vent (depending on the model) is provided with anadjustable valve to control the exhaust air flow.

Temperature control and safety

Temperature sensor is a J thermocouple. Temperature iscontrolled by a precise microprocessor-based controller that

provides a high accuracy and prevents the set temperaturefrom being exceeded. The controller digitally displayscontinuously the set and actual values oftemperature. Anindependent second electronic controller, with a secondthermocouple, has an adjustable upper limit, giving a class2 protection.

Heating

The tubular heating elements are sheathed and made ofstainless steel. They are ideally placed in the air blow. No-wear switching (solid state relay) is used for activating and

deactivating the heating elements.






61

Technical data

Ovens TH075 TH125 TH343 TH490 TH686

Performance

Temperature range ambient + 20°C to 500°CTemp spatial variation 200°C (1)±°C

< 2,5 < 2,5 < 2,5 < 2,5 < 2,5

Temperature fluctuation ±°C < 0,2 < 0,2 < 0,2 < 0,2 < 0,2

Dimensions

Work chamber volume L 75 125 343 490 686Internal width mm 500 500 700 700 700

Internal depth mm 500 500 1000 1000 1000Internal height mm 300 500 700 1000 1400External width mm 750 750 935 935 935External depth mm 750 750 1125 1125 1125External height mm 800 1000 1250 1550 1950Shelves in stainless steelNumber standard / maximum 1/2 2/3 2/4 2/6 2/8Shelves dimensions(w x d) mm

470x470 470x470 670x670 670x670 670x670

Max load shelf / oven kg 30/60 30/60 30/120 30/150 30/180Number of door (s) 1 1 1 1 1Mass (empty) Kg 95 115 210 270 350

Electrical supplyVoltage 50 HZ Volts 1000 1000 1000 1500 3000

Max power rationg Watts 3000 4000 9000 12 000 15 000

Factory options (must be specified at the time of ordering the main unit)OG9002 Outside casing also made of 304 stainless steel OP0014 Work chamber lighting 40 wattsOG9004 Special colour for external casing (indicate RAL) OG9006 Door windowOP0038 Digital timer 0/99 hours with auto/manu selection OG9005 Air circulation variatorOG9008 Digital weekly program timer OP0118 Additional thermocouple and connectorOP0049 Temperature profiler (4 programs of 16 segments each OG9009 Additional safety thermostat class 3.1

OP0116OP0117

Additional access port diameter 40 mm& silicone cork Additional access port diameter 60 mm

& silicone corkOP0024OP0025

Air extractor 230 m3/hour Air extractor 485 m3/hour

OP0080OP0091

Air extractor 230 m3/hour with variator Air extractor 485 m3/hour with variator

OP0016OP0017

Temperature paper recorder 1 probeTemperature paper recorder 2 probes

OP0010 Calibration certificate 1 temperature 1 point

Accessories (can be ordered separately)GA9001 Extra shelf 30 kg and supports AC0032

AC0033Silicone cork for access port diameter 40 mmSilicone cork for access port diameter 60 mm

GA9002 Reinforced extra shelf 60 kg and supports GA9005GA9006

Sub-frameSub-frame with castors

HIGH TEMP OVENS(CONTINUED)

Equipment

Fixed shelving for convenient loading / unloading. 1 shelf is supplied for TH075 and 2 for the other models. Additionalshelves are available. A 20 mm diameter access port with fiber cork is fitted as standard in the left hand wall of the oven.







Used for high temperature heating and drying.

MUFFLE FURNACES

Main features:1. Resistance wire embedded inside lining, up,down, left, right, bottom, 5 surface heating, furnacetemperature uniformity.2. Having a vent to discharge the steam and other

gases, prolong service life of heating elements.3. Having a hole to observe the heating condition.4. Chamber adopts advanced light material (0.29density), compared with the traditional muffle furnaceweight the 2/3, the rate of temperature have doubled,save the energy, the life expectancy increased 4 times.5. Controling temperature by programmable temperaturecontrol meter, intelligent temperature control, easy tooperate.

Specification

Max. temperature: 1200

Workign temperature: 1100

Inside dimensions: 200x200x200mmVoltage: 220V, 50HZPower: 4kWTemperaturetolerance:

± 0.5

Temperature controlmode:

Programmable automaticcontrol

MF-1200 Muffle furnaces

SAND BATH

Model

Specification Voltage(V)

Power(kW)

Workroomdimension mm

SB-01 300x250 220 1.5 300x250x70

SB-02 450x350 220 2 450x350x70

Model Max.temp.( )

Voltage Power(kW)

Workroom(mm)

WF-1000/1 1000 220V/50HZ 2.5 200x120x80

WF-1000/2 1000 220V/50HZ 4 300x200x120









63

General description

Used for drying,concentration,distill,dripping chemicalreagent,medicine and biological product, also used forwater bath constant temperature heating and anothertemperature test.

WATER BATH

Main featureStainless steel inner tank, built in heating pipe, Pt100transducer.Temperature constancy, convenient to set. Equippedwith oil bath.

Specification

Capacity(cm): 26 dia x 15 high

Rating(kw): 1.5Temp range: room temperature to 100

Lift distance(mm): 120 manually operation

WB-01/A Water bath

TPW seriesThermostatic water bath

Uses:It applies in distilling, drying, concentrating and thermostatic

heating the chemical drugs, checking serum andthermostatic culture the biological products and boilingsterilizing in laboratories, medical and health units, scientificand research units and colleges and universities etc.Characteristics:The shell adopts electrostatic spraying technology. Theinner bladder and upper cover are made of high-qualitystainless steel plate with property of corrosion resistant.There are hand-pointer type, digital display type andintellectual type for controlling temperature.

Specification

Type TPW420 TPW60

Voltage(v) 220 220

Power(w) 500±10% 750±10%

Temperature uniformity( )

≤±1 ≤±1

Temperature tolerance( )

≤±1 ≤±1

Temperature range( ) 37-65 37-65

Workroom(mm) 420x180x105 600x300x150

Inside detail of TPW seriesThermostatic water bath







WATER BATH(CONTINUED)

TPKW series Water bath

Characteristics:The surface is made of coated steel. The inner bladderand the upper cover is made of stainless steel, it resistscorrosion strongly. There are hand pointer and digitaldisplay meters. It has advantages of high precision incontrolling.

Specification

Model TPKW-D-1 TPKW-D-2 TPKW-D-4 TPKW-D-6 TPKW-S-4 TPKW-S-6 TPKW-S-8

Specifications single single single line4 holes

single line6 holes

double line4 holes

double line6 holes

double line8 holes

Voltage(v) 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz

Power(w) 300 500 1000 1500 1000 1500 2000

Temperatureuniformity( )

≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1

Temperaturetolerance()

≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1

Temperature range( )

RT+10-100 RT+10-101 RT+10-102 RT+10-103 RT+10-104 RT+10-105 RT+10-106

Temperaturesensitivity( )

≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1 ≤±1

Tolerance ofdisplay( )

≤±2 ≤±2 ≤±2 ≤±2 ≤±2 ≤±2 ≤±2

Workroom(mm)

160x170x90 325x170x90 650x170x90 940x170x90 325x330x90 480x330x90 650x330x90

TPHW Tri-purpose water bath

Characteristics:The shell adopts electrostatic spraying technology. Theinner bladder and upper cover are made of high-qualitystainless steel plate with property of corrosion resistant.There are hand-pointer type, digital display type andintellectual type for controlling temperature.

TPKW series Water bath

Model Voltage(v) Power(w) Temperatureuniformity( )

Temperaturetolerance

Temperaturerange( )

Workroom(mm)

TPHW420 220 1000±10% ≤±1 ≤±1 37-100 420x180x105TPHW600 220 2000±10% ≤±1 ≤±1 37-100 600x300x150




Weighing SamplesDRYING,WEIGHING AND GRADING


65

ELECTRONIC BALANCE

EB series

General description

Model EB-100 EB-200 EB-500 EB-1000

Max. Capacity 100g 200g 500g 1000gResolving power 0.1g 0.1g 0.1g 0.1gCalibration Weights 100g 200g 500g 1000gScale pan dimension dia. 135mmDisplay LEDVoltage AC220V±10% 50±1Hz

Usage EnvironmentTemperature

0～40

EB-B series

Model EB-100B EB-200B EB-300B EB-500B EB-600B EB-800B EB-1000B

Max. Capacity 100g 200g 300g 500g 500g 800g 1000gResolving power 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.02gCalibration Weights 100g 200g 200g 500g 500g 500g 1000gScale pan dimension dia. 135mm

Display LED

Voltage AC220V±10% 50±1Hz

Usage EnvironmentTemperature

0～40

EB-02A series

Model EB-102A

EB-202A

EB-302A

EB-502A

EB-602A

EB-802A EB-1002A

EB-1202A

EB-1502A

EB-2002A

EB-2000A

Max. Capacity 100g 200g 300g 500g 600g 800g 1000g 1200g 1500g 2000g 2000gResolving power 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.01g 0.02g

CalibrationWeights

100g 200g 200g 500g 500g 500g 1000g 1000g 1000g 2000g 2000g

Scale pandimension

dia. 115mm dia. 135mm

Display LCDVoltage AD 8V 300mA / 8 part AA battery

Usage

EnvironmentTemperature

0～40





Weighing SamplesDRYING,WEIGHING AND GRADING


MECHANICAL BALANCE

General description

Name Max.Capacity

ResolvingPower

Pallet size

MBT-20 Two rulerdamping balance

2000g 0.1g 150mm

WEIGHTS FOR BALANCES

General description

Max.Capacity

Combination of the number

1g 2g 5g 10g 20g 50g 100g 200g 500g 1000g 2000g

100g 1 1 2 1

200g 1 1 2 1 1

500 1 2 1 1 2

1000g 1 2 1 1 2 1

2000g 1 2 1 1 2 1 1 2 1 1

5000g 1 2 1 2 1 1 2 1 1 2 1

Usage: It mainly is used for measuring, transferring of scale value in factories and outside calibration and inspection ofall kinds of electronic balances. It also is used for mating of all kinds of balances in laboratory and schools for qualityanalyze.

Material: All kinds of stainless steel without magnetism, copper, A3 steel etc. The stainless steel without magnetismaccords with OIML international suggestion R111 requirements.The products are divided as whole set weights combination, single calibration balance.

Package: With package or without package (M grade), wood carton, or plastic carton




Sample gradingDRYING,WEIGHING AND GRADING


67

TEST SIEVES

STANDARD:

The range of sieves offered include ISO, EN, BS and

ASTM sieves.

Aperture Size Frame Dimeter200mm

Frame Diameter300mm

38μm TPS02-0400 TPS03-0400

45μm TPS02-0325 TPS03-032553μm TPS02-0270 TPS03-027063μm TPS02-0230 TPS03-0230

75μm TPS02-0200 TPS03-020090μm TPS02-0170 TPS03-0170106μm TPS02-0140 TPS03-0140125μm TPS02-0120 TPS03-0120150μm TPS02-0100 TPS03-0100180μm TPS02-0080 TPS03-0080212μm TPS02-0070 TPS03-0070250μm TPS02-0060 TPS03-0060300μm TPS02-0050 TPS03-0050355μm TPS02-0045 TPS03-0045425μm TPS02-0040 TPS03-0040500μm TPS02-0035 TPS03-0035600μm TPS02-0030 TPS03-0030710μm TPS02-0025 TPS03-0025

850μm TPS02-0020 TPS03-00201.00mm TPS02-0018 TPS03-00181.18mm TPS02-0016 TPS03-00161.40mm TPS02-0014 TPS03-00141.70mm TPS02-0012 TPS03-00122.00mm TPS02-0010 TPS03-00102.36mm TPS02-0008 TPS03-00082.80mm TPS02-0007 TPS03-00074.00mm TPS02-0005 TPS03-00054.75mm TPS02-0004 TPS03-00046.70mm / /

Woven wire test sieves Specification

There are two kinds of test sieves we are produced. Oneis perforated plate sieves, and the other is woven wire test

sieves.The aperture size of perforated plate sieves is from 4mm to125mm. the woven wire sizes from 38μm to 850μm (1-4.75in mm). Two kinds of material we used, one is stainlessSteel, another is brass. Stainless steel or brass is generallyused in the construction of woven wire mesh that performsthe straining. These devices are very accurate, and arewidely used in all types of laboratory particle analysis.

Introduction

Aperture Size Frame Dimeter200mm

Frame Diameter300mm

4.00mm TPH02-1500 TPH03-2500

4.75mm TPH02-1510 TPH03-25105.00mm TPH02-1515 TPH03-25155.60mm TPH02-1520 TPH03-2520

6.30mm TPH02-1525 TPH03-25256.70mm TPH02-1530 TPH03-25307.10mm TPH02-1535 TPH03-25358.00mm TPH02-1540 TPH03-25409.50mm TPH02-1550 TPH03-255010.0mm TPH02-1555 TPH03-255511.2mm TPH02-1560 TPH03-256012.5mm TPH02-1565 TPH03-256513.2mm TPH02-1570 TPH03-257014.0mm TPH02-1575 TPH03-257516.0mm TPH02-1580 TPH03-258019.0mm TPH02-1590 TPH03-259020.0mm TPH02-1595 TPH03-259522.4mm TPH02-1600 TPH03-2600

25.0mm TPH02-1605 TPH03-260526.5mm TPH02-1610 / 28.0mm TPH02-1615 TPH03-261531.5mm TPH02-1630 TPH03-263037.5mm TPH02-1640 TPH03-264040.0mm TPH02-1645 TPH03-264545.0mm TPH02-1650 TPH03-265050.0mm TPH02-1655 TPH03-265553.0mm TPH02-1670 TPH03-267075.0mm TPH02-1680 TPH03-268080.0mm TPH02-1685 TPH03-268590.0mm TPH02-1690 TPH03-2690106mm / TPH03-2700125mm TPH02-1710 TPH03-2710

Perforated sieves Specification





Sample gradingDRYING,WEIGHING AND GRADING


SIEVE SHAKER

Vibrating Screen is an up-to date laboratory automaticscreen designed and developed by our factory, applied toparticle analysis in the fields of pharmacy, metallurgy, foods,cosmetics and grain, and characterized by convenientoperation, no rotary component, and electronic controlledamplitude and frequency. Its performance index is equalto that of the vibrator with sieve manufactured by GermanFRITSCH. In comparison with the traditional manual screen,it can greatly reduce labor intensity of operators and raiseworking efficiency. It is an essential laboratory screen forparticle analysis.

TPZ-2 sieve shaker

TPZ-2 sieve shaker controller

The TPZ-1 High-frequency Sieve Shaker is mainly used forgraded analysis of non-cohesive and dry grain substance.

TPZ-1 sieve shaker

TPZ-1 Sieve shaker

Shaking frequency: 500 times/min.

Shaking method: up and downShaking amplitude: 1.5 mmTime setting: 0 – 60 min. selectableMotor power: 25 WSieve size: Ø200 x 50 mm (9pieces) or

Ø300 x 75mm (7pieces)Sieve opening: 20 – 0.75 mmPower supply: 220 V 50 HzDimension: 430 x 430 x 750 mmWeight: 16 kg

Operating range: ≤325 mesh

Vibration frequency: 3000 times/min, 6000 times/min

Amplitude selection: 0-3 mm, continuous adjustmentVibration mode: F ine v ib ra ti o n; I n te rm i tt en t

Vibration; Continuation VibrationWeight: 20 kgPower supply: AC220V±22V, 50Hz±1Hz

TPZ-2 sieve shaker

Sieve shaker




http://www.testmould.com Page 69

GeneralGENERAL

DIGITAL THERMOMETER


The meter is supplied without probes, which have to beselected and ordered separately.

DIAL INDICATORS

Dial indicators are precise measuring tools to transformlinear to angle one by mechanical transmission devices.

They are mainly used to measure the linear size, shape andposition errors of various workpieces.

Features: Steel body, metal dial adjustable ring,Semi-seal cap, Diameter of dial is dia.58.5mm.

Specification

The type of transducer: K type thermocouple (NiCr-Niai.)

Resolution: 1°C Accuracy: 0°C to 500°C: ± (0.75%+1°C)

500°C to 750°C: ± (1%+1°C)0°C to -20°C: ±2°C-20°C to -40°C: ±3°C-40°C to -50°C: -4°C750°C to 1050°C: (-3% ~0%)1050°C to 1300°C: (-5% ~-3%)

Measure range: -50°C to 750°COperating Temperature: 0°C to 50°CRelative Humidity: ≤80% RHStoring Temperature: -30°C to 60°CRelative Humidity: ≤80% RH

Dimensions: 24×72×108 mmImpedance: 100 MΩ

Model Range (mm) Grad. (mm)

TP0501 0-3 0.01

TP0502 0-5 0.01

TP0503 0-10 0.01

TP0501B 0-3 0.01

TP0502B 0-5 0.01

TP0503B 0-10 0.01

TP0504 0-10 0.01

TP0505 0-10 0.01

TP0504B 0-10 0.01

TP0505B 0-10 0.01

TP0506 0-20 0.01

TP0507 0-25 0.01

TP0508 0-30 0.01

TP0506B 0-20 0.01

TP0507B 0-25 0.01

TP0508B 0-30 0.01

TP0601 0-0.25 0.005

TP0602 0-0.5 0.005

TP0603 0-0.1 0.005

TP0604 0-0.25 0.001

TP0605 0-0.5 0.001

TP0606 0-1 0.001

EL82-5442 Digital Thermometer.

EL82-5442 Digital Thermometer.



Page 70 http://www.testmould.com

GeneralGENERAL

Introduction

It is made of stainless steel. For measuring wet filmthickness of paints, enamels, laquers, adhesives& manyother wet coatings that are sprayed, dipped or brushed ona smooth surface.

BURETTES

MEASURING PIPETTES

WET FILM THICKNESS GAUGE

Cate. No Capacity

(ml)

Accuracy limits

±ml

Graduation

Divisions(ml)Grade A Grade B

Accuracy limits

604 02-5 5 0.01 0.02 0.02604 02-10 10 0.025 0.05 0.05604 02-25 25 0.05 0.10 0.10

604 02-50 50 0.05 0.10 0.10

604 02-100 100 0.10 0.20 0.20

Cat.No Capacityml

A c c u r a c ylimits±ml

Graduationdivisions ml

Heightmm

629 02-0.1 0.1 0.004 0.001 355

629 02-0.2 0.2 0.006 0.002 355629 02-0.5 0.5 0.010 0.01 355629 02-1 1 0.015 0.01 355629 02-2 2 0.025 0.02 355629 02-5 5 0.05 0.05 355629 02-10 10 0.10 0.1 355629 02-25 25 0.20 0.1 450

629 02-50 50 0.20 0.2 495

LAB MEASURLING CYLINDER

Cat. NO. Capacityml

ID x Heightmm

PMC-10 10 10 x 180PMC-10 30 14 x 240PP-MC03 50 16 x 240PP-MC04 100 26 x 250PP-MC05 200 33 x 290PP-MC06 300 41 x 290PP-MC07 500 49 x 340

PP-MC08 1000 61 x 420




Glass and plastic wareLABORATORY GLASSWARE

202 Beaker, Tall Form, Graduated

202 Beaker, Tall Form, Graduated

Cat.No Capacityml

Grad.rangeml

O.D×Height.mm

Grad.Intervalml

202-50 50 10-40 38×70 10202-100 100 20-80 48×80 10202-150 150 20-140 54×95 20202-250 250 25-200 60×120 25202-300 300 50-250 64×125 25202-400 400 50-350 70×130 25202-500 500 100-400 75×140 50202-600 600 100-500 80×150 50202-800 800 100-750 90×175 50202-1L 1000 100-900 95×180 50202-2L 2000 200-1800 120×240 100202-3L 3000 250-2500 135×280 250

201 Beaker, low Form, Graduated

201 Beaker, low Form, Graduated

Cat.No Capacityml

Grad.rangeml

O.D×Height.mm

Grad.Intervalml

201-5 5 - 22×30 -201-10 10 4-8 26×35 4201-20 20 10-15 32×43 5201-25 25 10-15 34×50 5201-50 50 10-40 42×60 5201-100 100 20-80 50×70 10201-150 150 20-140 60×80 10201-200 200 25-175 66×90 10

201-250 250 25-200 70×95 25201-300 300 25-250 74×105 25

201-400 400 50-350 80×110 25201-500 500 50-400 85×120 25201-600 600 100-500 90×125 50201-800 800 100-750 100×135 50201-1L 1000 100-900 105×145 50201-2L 2000 200-1800 130×185 100201-3L 3000 300-2800 150×210 100201-4L 4000 500-3500 161×253 500201-5L 5000 500-4500 170×270 500

401 01 Erlenmeyer Flasks

401 01 Erlenmeyer Flasks

Cat.No Capacityml

N e c k .O.Dmm

Flask. O.Dmm

Heightmm

401-01-50 50 26 54 80401-01-100 100 32 66 106401-01-150 150 32 75 124401-01-200 200 34 79 132401-01-250 250 34 85 140401-01-300 300 34 90 162

401-01-500 500 38 103 184401-01-1L 1000 45 131 214

401-01-2L 2000 50 166 280401-01-3L 3000 50 187 310401-01-5L 5000 50 220 365

402 01 Erlenmeyer Flasks with ground in glass stopper

402 01 Erlenmeyer Flasks in glass stopper

Cat.No Capacityml

JointStandardTaper

Diam ofbodymm

Heightmm

402-01-50 50 14.5/23 51 85402-01-100 50 18.8/26 51 85402-01-150 100 14.5/26 64 105402-01-200 100 18.8/26 64 105402-01-250 250 18.8/26 85 140402-02-250 250 29.2/32 85 140402-03-250 250 40/45 85 140402-01-500 500 29.2/32 105 175

402-02-500 500 40/45 105 175402-01-1L 1000 40/45 131 220402-01-2L 2000 40/45 166 280

402-01-3L 3000 40/45 187 310

402-01-5L 5000 40/45 220 385





404 FLASKS flat bottom

404 Flasks flat bottom, long neck

Cat.No Capacityml

Diam ofneck(mm)

Diam of bodymm

Heightmm

404-50 50 22 50 105404-100 100 22 64 115404-250 250 34 85 145404-500 500 34 105 175404-1L 1000 42 131 210404-2L 2000 50 166 260404-3L 3000 50 195 305404-4L 4000 50 207 315

404-5L 5000 56 230 345404-6L 6000 65 236 355404-10L 10000 70 279 420

Cat.No Capacityml

Socketsize(mm)

Heightmm

417 04-25 25 98 14/23417 04-50 50 114 14/23417 04-100 100 140 14/23

417 03 FLASKS two neck

417 03 Flasks two neck

417 04 FLASKS three neck

417 04 Flasks three neck

Cat.No Capacityml

Centresocket Size

Side Socketsize(mm)

Heightmm

417 03-25 25 14/23 14/23 98417 03-50 50 14/23 14/23 114417 03-100 100 14/23 14/23 140

407 FLASKS,round bottom

407 FLASKS,round bottom,long neck

Cat.No Capacityml

Diam ofneck(mm)

Diam of bodymm

Heightmm

407-50 50 22 50 100407-100 100 22 64 110407-250 250 34 85 140407-500 500 34 105 170407-1L 1000 42 131 200407-2L 2000 50 166 250407-3L 3000 50 195 295407-4L 4000 50 207 300

407-5L 5000 56 230 320407-6L 6000 65 236 340407-10L 10000 65 279 400

620 01 VOLUMETRIC FLASKS

Cat.No Capacityml

A c cu r a c ylimits±ml

StopperSize

O.D×Heightmm

620 01-25 25 0.03 10/13 37×110620 01-50 50 0.05 10/13 49×140620 01-100 100 0.10 12.5/14 60×170620 01-200 200 0.15 14.5/15 75×210620 01-250 250 0.15 14.5/15 80×220620 01-500 500 0.25 18.8/17 100×265620 01-1L 1000 0.40 18.8/17 127×315620 01-2L 2000 0.60 24/20 160×375620 01-5L 5000 1.20 34.5/35 221×470

529 FLASKS distilling

Cat.No Capacityml

Neck.O.D.mm

Flask.O.D.mm

Heightmm

Sidearm(mm)O.D Length

529-50 50 22 53 135 7 80529-100 100 22 66 174 7 100529-250 250 24 86 216 8 125529-500 500 30 109 275 8 150529-1L 1000 35 135 320 9 180529-2L 2000 42 168 408 10 225529-3L 3000 48 192 450 11 250529-5L 5000 57 230 530 12 290





617 01 Measuring cylinders

Cat.No Capacityml

A ccur acylimits±ml

O.Dmm

Heightmm

617 01-10 10 0.2 16 137

617 01-25 25 0.5 21 162

617 01-50 50 0.5 26 197617 01-100 100 1.0 30 257617 01-250 250 2.0 42 310617 01-500 500 5.0 54 360617 01-1L 1000 10.0 70 440617 01-2L 2000 20.0 90 515

305 03 Reagent bottles

Cat.No Capacityml

Max. O.D.mm

Heightmm

Neck stocketsize

305 03-50 50 44 77 14/15

305 03-100 100 54 95 14/15305 03-250 250 73 129 19/26305 03-500 500 89 162 24/32305 03-1L 1000 111 200 29/32305 03-2L 2000 138 246 29/32305 03-5L 5000 186 318 45/40305 03-10L 10000 234 389 60/46

306 Tall form; 307 low from weighing

306 307 Weighing bottle tall form and low form

Cat.No Mouth dia.×Height mm

306 01-25 25×25

306 02-25 25×30

306 03-25 25×40

306 04-25 25×50

306 05-25 25×60

306 01-30 30×30

306 02-30 30×40

306 03-30 30×50306 04-30 30×60

306 05-30 30×70

306 01-40 40×50

306 01-45 45×30

306 02-45 45×70

Cat.No Mouth dia.×Height mm

307 01-30 30×20

307 02-30 30×25

307 01-35 35×25

307 02-35 35×70

307 01-40 40×20

307 02-40 40×25

307 03-40 40×30

307 04-40 40×70307 01-45 45×25

307 02-45 45×30

307 01-50 50×30

307 01-60 60×30

307 02-60 60×40

307 03-60 60×35

307 01-70 70×30

307 02-70 70×35

307 03-70 70×40

305 03 Reagent bottles

628 02 PIPETTES volumetric one-mark

Cat.No Capacityml

Accuracylimits±ml

Heightmm

628 02-1 1 0.015 330

628 02-2 2 0.02 340628 02-5 5 0.03 400628 02-10 10 0.04 450628 02-20 20 0.06 560628 02-25 25 0.06 570

628 02-50 50 0.10 600628 02-100 100 0.16 640

628 02 Pipettes volumetric one-mark





618 Measure cone shape conical

618 Measure cone shape conical

Cat.No Capacityml A ccuracylimits±ml

Graduationdivisionsml

Heigtmm

618-5 5 0.2 1.0 85618-10 10 0.4 1.0 100618-20 20 0.5 2.0 115618-50 50 1.0 5.0 140618-100 100 1.5 10.0 170618-250 250 3.0 25.0 200618-500 500 6.0 25.0 250618-1L 1000 10.0 50.0 315

803 Funnels with long stem

Cat.No Top.O.Dmm

Stem mmLength O.D

803-55 55 150 6803-70 70 150 6803-80 80 150 6

801 FUNNELS with short stem

801 Funnels with short stem

Cat.No Top.O.Dmm

Stem mmLength O.D

801-45 45 45 7801-50 54 50 7801-60 64 60 8801-70 74 70 8801-80 84 80 10801-90 94 90 10801-100 100 100 10

009 02 SEPARATING FUNNELS

009 02 Separating Funnels

Cat.No Top.O.Dmm

Stem mm Standardhollowkey norminal size

Socket Size

Length O.D

009 02-50 50 60 9 3NS 19/26009 02-100 100 60 9 3NS 19/26009 02-250 250 60 9 4NS 29/32009 02-500 500 60 10 4NS 29/32009 02-1L 1000 60 10 6NS 29/32009 02-2L 2000 60 10 6NS 29/32

803 FUNNELS with long stem

005 01 FUNNELS

Cylindrical

005 01 Funnels Cylindrical

Cat.No Top.O.Dmm

Stem mm Standard hollowkey norminal size

SocketSize

Length O.D

005 01-50 50 150 9 3NS 19/26005 01-100 100 150 9 3NS 19/26005 01-250 250 150 10 4NS 29/32

005 01-500 500 150 10 4NS 29/32005 01-1L 1000 150 10 6NS 29/32





Cat. NO.O.D.mm

208 01-40 40208 01-50 50208 01-60 60208 01-80 80208 01-100 100208 01-125 125208 01-150 150208 01-200 200208 01-250 250

208 01 WATCH GLASS DISHES

Cat. NO. Nominal sizeO.D×Heightmm

CoverO.Dmm

BaseO.Dmm

304-60 60×17 62 60304-75 75×17 77 75304-90 90×20 93 90304-100 100×22 103 100304-150 150×32 154 150304-200 200×32 204 200

304 PETRI DISHES

Cat.No Straight rimCat.No.

O.D.mm

Lengthmm

Wallmm

601 03-01 601 04-01 10 100 1.0±0.1601 03-02 601 04-02 10 100 1.0±0.1601 03-03 601 04-03 12 75 1.0±0.1601 03-04 601 04-04 12 100 1.0±0.1601 03-05 601 04-05 13 100 1.0±0.1601 03-06 601 04-06 16 125 1.3±0.1601 03-07 601 04-07 16 150 1.3±0.1601 03-08 601 04-08 18 150 1.3±0.1601 03-09 601 04-09 20 150 1.3±0.1601 03-10 601 04-10 20 180 1.3±0.1

601 03-11 601 04-11 20 200 1.3±0.1601 03 TEST TUBES

601 03 Test Tubes

Cat. NO. Sizemm

Max. I.Dmm

Porcelainplaindiameter mm

Overallheight mm

401 01-120 120 120 108 180401 01-160 160 160 148 230401 01-210 210 210 188 300401 01-240 240 240 220 340

401 01-300 300 300 280 420401 01-350 350 350 330 500

401 01 VACUUM DESICCATORS; 401 02 VACUUM DESICCATORS

401 01 Desiccators

Cat. NO. Sizemm

Max. I.Dmm

Porcelainplaindiametermm

Overallheight mm

401 02-120 120 29/32 108 227401 02-160 160 34/35 148 285401 02-180 180 34/35 160 305401 02-210 210 40/38 188 347

401 02-240 240 50/42 220 381401 02-300 300 60/46 280 467401 02-350 350 71/51 330 544

401 02 Vacuum Desiccators

Cat. NO.Capacityml

PP-WB01 100

PP-WB02 250

PP-WB03 500

PP-WB04 1000

PP-WB wash bottle

PP-WB Wash bottle

Watch glass dishes

Petri dishes



PAGE 76 WWW.TESTMOULD.COM

Hardness testerNDT EQUIPMENT

CTH180 Hardness tester



Specification

Measuring range: ( 17 0- 96 0)HL D, (17- 68 .5 )

HRC,(19-651)HB, (80-976)HV,(30-100)HS, (59-85)HRA, (13-100)HRB

Measuring direction: 360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: segment LCDData memory: max. 100 groups (relative to

impact times 32~1)

Working voltage: 3V(2 AA size alkaline battery)

Continuous working period about 100 hours (Withbacklight off)Communication interface: RS232


Specification

Measuring range: ( 17 0- 96 0)HL D, (17- 68 .5 )HRC,(19-651)HB, (80-976)HV, (30-100)HS, (59-85)HRA,(13-100)HRB

Measuring direction: 360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HS

Display: Dot matrix LCD,128×64 dotsData memory: Max. 500 groups (relative to

impact times 32~1)

Working voltage: 3V(2 AA size alkaline battery)

HARDNESS MEASUREMENT

Ideal for site testing of the hardness of compression platens,cement moulds and any other steel or cast iron piece within

the operating range described below. It can be connectedto PC or printer by the RS 232 output for data processingand print.

Main features:- Compact metal case, suitable for use under poorworking conditions. Test at any angle,even upside down.- Wide measuring range. It can measure the hardness of

all metallic materials. Direct display of hardness scalesHRB, HRC, HV, HB, HS, HL- Large screen(128×64 dot matrix LCD), showing allfunctions and parameters. With EL background light.- Software calibration function.- Software to connect with PC via RS232 port. Microprinter support.






WWW.TESTMOULD.COM PAGE 77



Specification

Measuring range: HLD(170~960)HLDMeasuring direction: 0°~360°

Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: Dot matrix LCD, 128×64 dotsData memory: 500 groups max.(relative to impact

times 32~1 )Printing paper: Width is (57.5±0.5)mm, diameter is

30mm.Battery pack: 6V NI-MH

Battery charger: 9V/500mA

Continuous workingperiod:

about 150 hours (With backlight off,no printing)

Communicationinterface:

USB1.1

Outline dimensions: 212mm×80mm×32mm



HL200 Hardness tester

HL200 Hardness tester

Specification

Measuring range: HLD(170~960)HLDMeasuring direction: 0°~360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: segment LCDData memory: 100 groups max.(relative to impact

times 32~1 )Printing paper: Width is (57.5±0.5)mm, diameter is

30mm.Battery charger: 9V/500mA

Continuous workingperiod:

about 150 hours (With backlight off,no printing)


USB1.1

Outline dimensions: 212mm×80mm×32mm

Specification

Measuring range: HLD(170~960)HLD, , (17-68.5)HRC,(19-651)HB,(80-976)HV,(30-

100)HS,(59-85)HRA,(13-100)HRBMeasuring direction: 0°~360°Hardness Scale: HL,HB,HRB,HRC,HRA,HV,HSDisplay: Dot matrix LCD,128×64 dots

Data memory: 500 groups max.(relative to impacttimes 32~1 )

Battery charger: 3V (2 AA size alkaline batteryContinuous workingperiod:

about 50 hours (With backlight off)


USB1.1

Indicating value error: HLD: ±5 HRC: ±1 HB: ±4







ROCKWELL HARDNESS TESTER

Portable Rockwell Hardness Tester

ModelOpening Size(W×D)

mm

NetWeight

KG

Application

Aluminum alloy, copper alloy, stainlesssteel, steel, carbide etc.

RHT-P1 25×25 0.7 Thickness of test piece: 1--25mm,

Diameter of cylinder Ø: 3--25mmRHT-P2 50×50 1.2kg Thickness of test piece: 1--50mm, Diameter

of cylinder Ø: 3--50mmRHT-P3 100×50 1.5kg Thickness of test piece or diameter of

cylinder <100mmRHT-P4 100×100 2.5kg Thickness of test piece or diameter of

cylinder <100mm

The tester is suitable for testing a wide range of metals from soft metals tovery hard alloys, including aluminum alloys, copper, copper alloys, mild steel,stainless steel, quenched steel, tempered steel, carburized steel, and carbide.With a variety of anvils, the tester can be used to test sheets, cylinders andother materials of different shapes. It can also test the hardness of pipes fromboth inside and outside

RHT-P2

Initial Test Force: 10 kg• Major Test Force: 60 kg, 100 kg or 150 kg• Accuracy: ±1.5HRC• Precision: ±0.5 HR• Versatility: tests in the hand or on the desk; tests long, heavy specimens• without cutting.

Superficial Rockwell Hardness Tester

The PHR portable superficial Rockwell hardness testers are a variety of theRockwell hardness testers. They have smaller test forces and thus smallerindentation, used to test the hardness of thin and small workpiceces such asthin metal sheets, tubings, thin shafts, small balls, case hardened materials andother metal parts which require indentation as small as possible.

RHT-S1







Model Opening Size

(W×D)mm

Net

Weightkg

Application

RHT-S2 25 × 25 0.7 thin sheet, thin wall pipe, small component

and workpiece with hardened surface by

carburizing, nitriding and high-frequency

quenching. Thickness > 0.15mmRHT-S2 50 × 50 1.2 thin sheet, thin wall pipe, small component

and workpiece with hardened surface by


quenching. Thickness > 0.15mmRHT-S3 100 × 50 1.5 workpiece with hardened surface by


quenching. Thickness or diameter of test

piece > 100mm

Initial Test Force: 3 kg• Major Test Force: 15 kg, 30 kg or 45 kg• Accuracy: ±1.5HRC• Precision: ±0.5 HR• Versatility: tests in the hand or on the desk; tests long, heavy specimens• without cutting.

Superficial Rockwell Hardness Tester for Tubings

Model Opening Size(W×D)mm

NetWeightkg

Application

RHT-ST1 25 × 25 2.5kg slim, thin wall metal pipe of inner diameter

Ø > 4.8mm

It is designed with a round anvil to test the hardness of slim and thin tubes ofsoft metallic materials.

RHT-ST1

Large Rockwell Hardness Tester

The large hardness test for large workpieces such as large or extra largemoulds, castings, forgings, shafts, rollers, pipes and assembled parts as wellas other large machinery parts such as annealed, quenched, high frequencyquenched, and carburized metal parts.

RHT-L1

Superficial Rockwell Hardness Tester(continued)







Large Rockwell Hardness Tester(continued)

Model Opening Size

(W×D)mm

Net

Weightkg

Application

RHT L1 200 × 100 4 aluminum alloy, copper alloy, stainless steel,

steel, carbide etc. Thickness of test piece or

diameter of cylinder <200mmRHT L2 200 × 250 5.2 aluminum alloy, copper alloy, stainless steel,

steel, carbide etc. Thickness of test piece or

diameter of cylinder <200mmRHT L3 500 ×300 8.9 aluminum alloy, copper alloy, stainless steel,

steel, carbide etc.Thickness of test piece or

diameter of cylinder <500mm

Chain Clamp Rockwell Hardness Testers

RHT Chain Clamp Rockwell Hardness Tester is used for on-site test the largeshafts, rollers, mouldings and steel tubes with cylindrical surface. This typeof hardness tester can be used for testing the hardness of metal products insegments and of the steel-tube welding lines. It provides an unprecedentedmethod to test the hardness of large-sized cylindrical workpieces.

Item Opening Size(Diameter) Weight

RHT C1 200mm-500mm 4kg

RHT C2 450mm-850mm 5kg

RHT C3 800mm-1600mm 7.5kg

RHT-C1

RHT-M1

Magnetic Type Brinell & Rockwell Hardness Tester

The test head of the Brinell & Rockwellhardness tester is adsorbed on thesurface of iron and steel by magneticforce, without giving support to thetest piece.

Initial Test Force: 10 kg• Rockwelll Test Force: 60 kg, 100 kg or 150 kg

• Brinell Test Force: 62.5kg, 125kg, 187.5kg• Indenter: 120°diamond cone dia. 1.588mm, dia. 2.5mm, dia. 5mm carbide balls• Force Applying Method: by screw• Maximum Magnetic Force: >350kg• Test Range : Rockwell hardness HRC, HRB, HRA etc. 15 scales Brinell hardness HB 30,•

HB 10, HB 5, HB 2.5 etc. 4 testing conditionsResolution: Rockwell hardness 0.5HR, Brinell hardness indentation diameter 0.01mm• Accuracy: Meets the requirements of ISO6506/6508• Minimum Specimen Size: 60×180 mm• Net Weight: 4.9kg• Package Gross Weight: 8.2kg•







BRINELL HARDNESS TESTER

Portable Brinell Hardness Tester is designed on basis of the basic theory ofBrinell Hardness Testing. The testing load is accurately controlled by shear pin.

The indentation diameter is read by reading microscope after the indentationis indented on test specimens. Brinell testing result can be obtained throughchecking appendix.

Test force: 1580kg;• Accuracy of test force:• < 1%;Indenter: dia. 7.26mm steel ball indenter (testing range: 100-400HB);• (Optional) dia. 4.0mm carbide ball indenter (testing range: 400-650HB)• Opening size (W×D):150mmx100mm• Net weight: Bench type: 5.1kg ;Portable type:•

4.2kg ;Hammer impact type: 0.8kg

BHT

WHT

WEBSTER HARDNESS TESTER

W Series Webster Tester is a portable instrument which can on-site test softmetals quickly. The Webster Hardness Tester is used to inspect the result ofheat treatment, to sort the materials in the warehouse, and to test the longworkpieces inconvenient taken to the lab. The Webster hardness tester is verysuitable for quality inspection of batch products one by one in the productionfield. The hardness value can be read directly on the indicator dial.

Model Dimension ofspecimen

NetWeightKG

Application

WHT-20 0.4 - 6mm 0.5 regular type for aluminum alloy profile, pipe and sheet

WHT-20a 0.4 - 13mm 0.5 thick wall aluminum alloy material

WHT-20b Min Dia: 6 0.5 aluminum alloy pipe of small diameter and aluminum alloy

WHT-BB75 Thickness: 0.4 - 6mm 0.5 copper and soft copper alloys such as annealed brass

WHT-BB75b Min Dia: 6mm 0.5 copper or annealed brass pipe

WHT-B75 Thickness: 0.4 - 6mm 0.5 extra-hard aluminum, brass

WHT-B75b Min Dia: 6mm 0.5 slim extra-hard aluminum or brass pipe

WHT-B92 0.4 - 6mm 0.5 soft steel materials not exceeding 230 HV, such as cold rolled sheet,

hot rolled sheet and galvanized sheet etc.






Thickness gaugeNDT EQUIPMENT

CT200 Thickness gauge


Specification

Display: 128×64 dot matrix LCD with ELbacklight.

Measuring Range: 0.75~300mm (in Steel)Sound Velocity

Range:

1000~9999 m/s

Resolution: 0.1/0.01mm (selectable)

Accuracy: ±(0.5%Thickness+0.04)mm

Units: Metric/English unit selectable

Four measurements readings per second for single point

measurement, and ten per second for ScanMode.

Memory for 20 files (up to 99 values for each file) of stored

values.

Upper and lower limit can be pre-set. It will alarm automatically

when the result value exceeding the limit.Power Supply: Two “AA” size, 1.5 volt alkaline batteries.

100 hours typical operating time (EL

backlight off).

Communication: RS232 serial port

Case: Extruded aluminum body suitable for use

under poor working conditions.

Outline Dimension: 132Height X 76.2Width mm.

Weight: 345g


Specification

Display: 4.5 digits LCD with EL backlight

Measuring Range: 0.75~300mm (in Steel)Sound VelocityRange:

1000~9999 m/s

Resolution: 0.1mm Accuracy: ±(0.5%Thickness+0.04)

mm,depends on materials andconditions

Units: Metric/Imperial unit selectableFour measurements readings per second for single pointmeasurement, and ten per second for Scan Mode.Memory for 20 files (up to 99 values for each file) ofstored values.Power Source: Two “AA” size, 1.5 Volt alkaline

batteries. 100 hours typical operatingtime (EL backlight off)

Outline Dimension: 150×74×32 mmWeight: 245g






Universal testers. Steel mechanical testingSTEEL


83

COMPUTER CONTROLLED UNIVERSALTESTING MACHINES

This machine is a new-type universal material testingmachine based on the pendulum on, it can quicklydetermine the materials' max force value and the yieldpoint correctly.It is mainly used for metal and nonmetal materials tensile,compression, bending and Shear and other mechanicalperformance test.

TP-1000S universal testing machine

Specification

Max. load: 1000 kNMeasuring range andminimum value:

don't divide scale,equivalent 3

Resolution: 0.1 kN

Displacement variant accuracy: ± 0.5%

Force measurement range: 4-100% F S

Force measurement precision: ± 1%Round sample clamping dia.: 20-60mmFlat specimen clamping thickness: 0-40mmFlat specimen max. width: 75mm (or custom)

Max. distance between bending: 500mmShear specimens dia.: 10mmThe tensile space: 600mmCompression space: 600mm

Piston stroke: 250mmEffectively distance between the twopillars tensile space:

550mm

Test table rise speed(max.):

≥70mm /min

Lower jaw singkang speed: ≥200mm /minOil pump motor power: 225 kWBeams and mobile power: 0.55 KWOverall dimension(mm): 1060×760×2500Weight: 3200 kg

This tester uses hydraulic load, digital control instrumentshows results, convenient operation, accurate and reliabledate,it can do generally steel and other metal materialstensile, compression, bending and cutting experiment,also do generally materials, plastic, cement and concretecompression and bending test.

TP-600BC Universal testing machine

TP-600BC Universal testing machine

Specification

Max. load: 600 kNMeasuring range andminimum value:

don't divide scale,equivalent 3

Resolution: 0.1 kNDisplacement relative error: ± 1%Clamping type: Manual

Round sample clamping dia.: 13-40mmFlat specimen clamping thickness: 0-15mmFlat specimen max. width: 75mm

Max. distance between platens: 650mmShear specimens dia.: 75mmMax distance between the tension

jaws:

650mm

Max. distance between the bendingbivots:

600mm

Platen dia.: 160mmDistance between the two pillars inthe tensile space:

500mm

Oil pump motor power: 1.3 kWBeams and mobile power: 0.75 KWOverall dimension(mm): 720×580×2100Weight: 2100 kg

TP-1000S universal testing machine





Universal testers. Steel mechanical testingSTEEL

DYNAMOMETER DISPLAYHYDRAULIC UNIVERSAL TESTING MACHINES

WE-1000A Dynamometer Display Hydraulic

Universal Testing Machine

Specification

Max. capacity (kN): 1000Measuring range: 4%-100% of FSRelative error of reading: ≤± 1%Clamping method: Hydraulic

clampingRound sample clamping dia.range(mm):

13-60

Flat specimen clamping range(mm): 0-40Flat specimen max. width(mm): 125Max. tension test space(mm): 780Max. compression test space(mm): 650Dynamometer dimensions (mm): 1050×770×1775

Load frame dimensions(including piston stroke) (mm): 1255×866×3900

Motor power (KW): 2.3Load frame weight (KG): 5000Column net distance (mm): 675Compression platen size (mm): 204×204Span of bending roller (mm): 1000Width of bending roller (mm): 140

Allowable camber (mm): 150Max. piston stroke (mm): 250Piston max. speed (mm/min): Approx. 50Crosshead max. speed (mm/min): Approx 150Displacement device: ruler

STANDARD: In accordance with or exceed the

requirements of the ISO6892.

WE-1000A Dynamometer Display Hydraulic Universal Testing Machine

FLEXURAL TESTING MACHINES TF-5000 EPS strength and Flexural test machine

Specification

Load: 0-5000N interval matching

Force resolution 1/10000Force accuarcy: ≤0.5%Force magnification: 7 automatic switchDisplacement accuracy: ≤0.5%

Metal extension project resolution:

1/1000

Metal extension project accuracy:

≤0.5%

Large deformation ± 1mm

Documents

Catalogo Testing. China