Upload
truongdang
View
214
Download
0
Embed Size (px)
Citation preview
RUBBER PADS
TEXTILE MESH PADS
WIRE MESH RUBBER PADS
EXTRUDED PROFILES
ELECTRO INSULATING MAT
TEXTILE MESH / NO TEXTILE MESH RUBBER MAT
CONVEYOR BELT
w w w . r a c o r d e x . r o
Rubber, polyurethane and plastic products manufacturer
COMPANY RACORDEX
Established in 1991, S.C. S.R.L. so far functioned without interruption, imposing on domestic and foreign markets through the quality of products manufactured in line with market requirements, answering
RACORDEXthe customers’
requirements by observing the contracts with respect quality, low price, delivery terms and promptitude.
RACORDEX has implemented the integrated management system: A.P.I. Q1, ED. 9: 2013 (ISO/TS 29001:2010)
Quality SR EN ISO 9001:2008 / EN ISO 9001:2008Environment SR EN ISO 14001:2005 / EN ISO 14001:2004Health SR OHSAS 18001:2008 / BS OHSAS 18001:2007OSIM registration certificate nr. 86180 in use until 03.05.2017
RACORDEX manufactures a wide range of products:
-polyurethane elastomeric pads
-NBR, EPDM, FKM, siliconic rubber pads,
-rubber pads with textile mesh and wired mesh, flexible couplings, vibration pads
-rubber mat, electroinsulating rubber mat, rubber tiles,electroinsulating platform
-conveyor belt for general use, conveyor belt for food products, assembling conveyor belt on the spot, wide transmission belts, wheels rubberizing
Besides rubber articles, the company also produces textiles:work and protection equipment:smocks, overalls, BBC towels, BBC cloths, etc.
Laboratory Equipment:
w w w. r a c o r d e x . r o
The production activity is conducted in a new hall, specifically equiped with machineries designed to process rubber, plastic products and polyurethanic elastomers. Our activity takes place in optimal operating conditions that insure great results in order to mantain a high quality standard and satisfy our clients.
Our raw material supply is secured both from the domestic and foreign markets. We only purchase raw material with features guaranteed at the level required by [processing technologies and the high quality of our products.
Appropriately qualified personnel as well highly qualified personnel in elastomer and polymer chemistry and technology, and other areas as well contribute to our meeting the objectives set by the company managerial policy.
The following companies are Racordex’s most loyal customers:PETROM OMV SA GrupHIDROCONSTRUCTIA SATOTALGAZ IASIARPEGA TRADING SRLEXPERT PETROLEUM SRL TimiºROMINSERV PETROMIDIAROMPETROL SAPETROSANTANDERPETROFACLUFKIN INDUSTRIES SRLCDI OILFIELD SERVICES SRL BacãuSW UMWELTTECHNIK ROMANIA SRL Giurgiu
1. dynamometer tests for mechanical RAY-RAN
2 .drying stove 3. device for determining the dielectric rigidity
4. durometru, emphasis, balance,
Product quality is verified in equipped with its own special
equipment to determine specific physical and mechanical characteristics of elastomers, polymers and rubber mixtures.
our ownlaboratory
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethaneand plastic products manufacturer
w w w. r a c o r d e x . r o
APPLICATION
These rubber packings are part of mud pump valves, used in pumping oil and mud.
CLASSIFICATION AND BUILT DESCRIPTION
Dimensions of rubber packings for mud pump valves are given in Figure 1 and Table 1.The rubber mixture used is based on acrylonitrile elastomer butadiene (NBR), resistant to oil-based products. Its hardness is shown in Table 1.
When you place your order, please mention the following: 1) Name 2) Draft No
Example: valve packing - No 617.75-01.38.05.0
# Draft No.Dimensions
Rubber hardness
D d H
- - mm Sh
1 617.75-01.38.05.0 95 30,2 12 85-5
2 614.12-01.02.03.0 110 30 20 75-5
3 410.01.059.3
141,5 38 22,5 75-5
4 617.09-01.55.03.0
5 306B-2.48.3
190 45 31 85-5
6 617.03-01.18.03.0
d
D
H
Figura 1
Hinged valve pad2PN160-95x65x30,2x12 2PN400-141,5x38x22,5
Hinged valve padppa 5x10-110x30x20
Hinged valve pad2PN700-190x106x80x30
COD.617.75.01.38.05.0 COD.410.01.059.3 COD.614.12.01.02.03.0 COD0617.03.01.18.03.0
MUD PUMP VALVES PACKINGS
Hinged valve pad
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
PACKINGS FOR SLIP HORIZONTAL ERUPTION PREVENTER MB2-type
APPLICATION
Rubber packings are mounted on horizontal eruption preventer MB2-type (mechanical drive), used in shallow drilling or in such geological formations where severe eruption is not expected.
CLASSIFICATION AND BUILT DESCRIPTION
Rubber packings for horizontal eruption preventer MB2-type are delivered in pairs (2 pieces). Their specifications are 6in x 210 bar, with various full closure nominal sizes (see Figure 1 and Table 1).
The rubber mixture used is based on acrylonitrile elastomer butadiene (NBR), resistant to oil-based products and low temperatures, i.e. -30-100 degrees Celsius; hardness 75+-5 degrees Sh.
When you place your order, please mention the following: 1) Name 2) Nominal closure sizes Example: slip packing MB2-6 x 210 x 3 1/2
Sizes Nominal closure sizes Sizes
2 x R H
- in mm
MB-6 in x 210 0 2 3/8 2 7/8 3 1/2 295,5 116
A A
R
A - A
H
Figura 1
Tabel 1
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
MUD PUMP RETRIEVABLE PACKING PISTONS
APPLICATION
Retrievable packing pistons are parts of mud pumps used in oil industry. They are double-acting, flare bore pistons.
CLASSIFICATION AND BUILT DESCRIPTION
Retrievable packing pistons are made of a steel body (1) on which two rubber packings (2) are mounted and fixed on the piston with pans and metal locks (3 and 4) – Figure 1.
The packing is made of rubber and a rubber sheet set horizontally laid out orderly in cross-section.
Retrievable packing pistons are manufactured in three types (sizes): cone 3 3; cone 3 V and cone VI (nominal sizes shown in Table 1).
The rubber mixture used is based on acrylonitrile elastomer butadiene (NBR), resistant to oil-based products and low temperatures, i.e. -20-100 degrees Celsius; hardness 85+-5 degrees Sh, and a good wear hardness.
Retrievable packings as spare parts can be manufactured upon request.
When you place your order, please mention the following: 1) Name 2) Piston or packing type (dimensions) 3) Nominal size Example: Retrievable packing piston cone V 5 3/4; or: Retrievable packing cone V 5 3/4.
Type (sizes) (Flare K)
Nominal sizeSizes
D D1 L H G
- in mm
CON 3
3 1/2 88,9 90,6
124 32,50 37,444 101,6 103,6
5 126,5 129,0
CON V
4 1/2 113,9 116,5
125 49,5 56,616
5 126,6 129,3
5 3/4 146,65 148,4
6 3/4 171,05 174,0
7 1/4 183,75 186,7
8 202,8 206,0
CON VI
5 3/4 145,65 148,6
145 60,325 69,3166 3/4 171,05 174,0
7 1/4 183,75 187,2
8 202,8 206,0
G
H
M
D
D1
L
Conicitate K
Figura 1
1 22 3 4
Retrievable packing pistons (Mission) Packing3 1/2 ”,4”, 4 1/2”, 5”, 5 1/2”, 6”, 7”, 8”
. MISSION con III, V, VI
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
SLIP HORIZONTAL ERUPTION PREVENTER DF-type PACKINGS
APPLICATION
Rubber packings are mounted on horizontal eruption preventer DF-type, used at the hole top to avoid free eruption during drilling oil or gas wells or during their operation.
LASSIFICATION AND BUILT DESCRIPTION
Rubber packings for horizontal eruption preventer DF-type are delivered in pairs (2 pieces). They are manufactured in two sizes, with different nominal closure sizes (i.e. full closure and boring rod closure or bore-hole tube - (see Figure 1 and Table 1).
The rubber mixture used is based on acrylonitrile elastomer butadiene (NBR), resistant to oil-based products and low temperatures, i.e. -30-100 degrees Celsius; hardness 75+-5 degrees Sh.
SizesNominal pressure Closure size
Sizes
d H
in bar in
DF 7 1/16
210
0 2 3/8 2 7/8 3 1/2 300 68350
700
DF 9
210
0 2 3/8 2 7/8 2 7/8 3 1/2 4 4 1/2 4 3/4 5 5 5 1/2 5 1/16 331 98350
700
DF 13 5/8
210
0 3 1/2 4 4 1/2 4 3/4 5 5 1/2 5 9/16 5 3/4 6 6 5/8 7 440 98
350
DF 13 5/8 700 0 2 3/8 2 7/8 3 1/2 4 4 1/2 4 3/4 5 5 1/2 5 9/16 5 3/4 6 450 98
dH
Figura 1
Tabel 1
Preventer DF-type Packings
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
BORE PIPE THREAD-PROTECTING COVER
Item #
Type of Joint (pin/sleeve-joint)Right-handed
ThreadsLeft-handed
ThreadsRUBER TYPE
1. 2 3/8IF X X X 0 RUBER 90 ±5 SH
2. 2 7/8REG X X X 0 RUBER 90 ±5 SH
3. 2 7\8TE1 X X 0 RUBER 90 ±5 SH
4. 2 7/8TE2 X X 0 RUBER 90 ±5 SH
5. 2 7/8IF X X X 0 RUBER 90 ±5 SH
6. 2 7/8 REG X X X 0 RUBER 90 ±5 SH
7. 3 1/2IF X X X 0 RUBER 90 ±5 SH
8. 3 1/2REG X X X 0 RUBER 90 ±5 SH
9. 4 IF X X 0 RUBER 90 ±5 SH
10. 4 1/2IF X X 0 RUBER 90 ±5 SH
11. 4 1/2REG X X X 0 RUBER 90 ±5 SH
12. 5 1/2FH X X 0 RUBER 90 ±5 SH
13. 5 9/16FH X X 0 RUBER 90 ±5 SH
14. 6 5/8REG X X X 0 RUBER 90 ±5 SH
15. 7 5/8REG X X 0 RUBER 90 ±5 SH
Sleeve joint drill-pipe thread protectors, IF, REG, FH, TE2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 6 5/8”, 7 5/8”
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
BORING ROD RUBBER PROTECTERS (BETTIS)
APPLICATION
Rubber protectors are applied to boring rods equipped with special sleeves with a view to protecting the boring strings of casing.
CLASSIFICATION AND BUILT DESCRIPTION
Rubber protectors are manufactured from acrylonitrile elastomer butadiene (NBR) rubber mixture – hardness 63 + - 5 degrees Sh and temperatures ranging between -35-100 degrees Celsius; its breaking limit is min 105 kgf /cm2, elongation on break - min 350%.
The nominal sizes of protectors are given in the table below.
Rubber protector nominal diameter (boring rod
nominal diameter)
Special joint Protector
Type Outer
diameter
Inner diameter di±1.5%
Outer diameter de±1.5%
Post-rod mounting outer diameter ±4%
mm in
60 2 3/8
N 79,1
40 87 98U 87,7
73 2 7/8
N 95,2
45
87 104
U 101,8 100 115
89 3 1/2
N 108,0
50
95 120
L 117,5 101 127
U 120,6 118 139
102 4
L 133,1
65 138 159U 116,0
114 4 1/2
N 139,7
72
132 159
L 116,0
146 171U 155,6
127 5 L 178,0 85 165 190
140 5 1/2
N 171,1
95 168 197L 177,8
U 185,5
Bettis Packing3/8” , 3 1/2”, 4 1/2” , 5”, 5 1/2”
178
Dimensiuni in mm
de
di
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
PIN HINGE PROTECTOR
The Racordex Drill Pipe/Casing Protectors(DDPs) are steel reinforced rubber pads which, when installed around the drill pipe, offer expandable downhole wear surface. They are designed to protect the casing I.D. from drill string wear. They are recommended for deep holes, deviated holes, high speed drilling, higt torque and offshorn application.
PISTON RUBBER PADS
GUIBERZON pads2 7/8” (20 sarme)
GUIBERZON pads2 7/8” (10 sarme)
GUIBERZON pads2 7/8” (24 sarme)
Multi-cup piston pads MW 2 7/8
Three-cup pads ö 56.7
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
Valve clip pad “O” rings Inele „O” Scraping ring pad102 x 90 x 12
Valve pad ppa 5 x 10146 x 121 x 111 x 21
Pad ppa 5 x 10102 x 78 x 19
Drill pipe wipers2 1/2”, 3 1/2 “,4 1/2 “, 5”
Preventer cutter flat padSE 7 1/16 x 140(350) x 2 7/8
Preventer cutter curve padSE 7 1/16 x 140(350) x 2 7/8
Single block 5” pads Bronze sealing ring kits
WIRE MESH RUBBER PADS
w w w. r a c o r d e x . r o
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
TEXTILE MESH PADS
Rod PPA pad 2PN 700 Rod PPA pad 2PN 700dlemi – 100 x 75 x 35
Rod PPA pad 2PN 700back – 100 x 75 x 17
Rod PPA pad 2PN 700front – 100 x 74,5 x 16,5
Pads 123 x 90 x 15 Pads CH 50t85 x 55 x 15
Pads CH 125t119 x 83,6 x 20,3
Pads CH 320t127,8 x 90,6 x 20,3
Outer bushing PPA pad 2PN 400205 x 235 x 15
Rod PPA pad 2PN 700 292 x 256 x 20
COD 123 COD 200.21.00.00.510 COD 200.10.00.00.39.0
COD 617.15.02.85.050 COD 306.B.2.85.3 COD 617.15.02.85.040
COD 617.22.01.33.04.0 COD 306.B.2.A.3 COD 617.03.11.100
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
RUBBER PADS
Converter pad 56 x 30 x 14 x 9
Converter pad42 x 31 x 20 x 10
Habe pads Pads Habe 2”, 3”, 4”
Cone-shaped blow out preventer pads 60 x 55 x 18
Cone-shaped blow out preventer pads 60 x 55 x 16
Preventer rod pad 3/4 x 7/8
Cameron 2” pad Valve + sleeve
Cameron 4” pad Valve + sleeve
Rod PPA pad 2PN 400 90 x 56 x 77
Rod PPA pad 3PN 46590 x 56 x 20
V-sleeves Elastic couplings – different sizesi
Membrane pad 94 x 62 x 23
Coupling pad100 x 55 x 30
Rod buffing padsÔ 32 , Ô 38
Bixa pads ppa 5 x 10159 x 139 x 40
Pads Ppa 3PN 465203 x 228 x 32
w w w. r a c o r d e x . r o
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
EXTRUDED PROFILES
TEXTILE MESH / NO TEXTILE MESH RUBBER MAT (different thicknesses)
ELECTRO INSULATING MAT
Electro insulating mat – green, red, grey (different thicknesses)
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w. r a c o r d e x . r o
CONVEYOR BELT (DIFFERENT THICKNESSES)
Rubber, polyurethane and plastic products manufacturer
Rubber, polyurethane and plastic products manufacturer
w w w . r a c o r d e x . r o
Headquaerter:Phone:Phone/Fax:Mobil:E-mail:
Bãlþãteºti, Florilor Street, Neamþ County, postal code 617025+40233-244112+40233-244373+40722-245817, [email protected], [email protected], [email protected]
259
Rubber, polyurethane and plastic products manufacturer