Catalog Int 250111

CATALOG 2010

Note

TRINOS Product Catalog. Effective 2010.

The purpose of this catalog and the technical information contai-ned therein is to provide you with the most extensive possible in-formation and advice.

May we ask for your understanding that we have not been able to include all concrete applications or results under test conditions. Many factors that are beyond our control could be of relevance for the individual case in question. For this reason, no claims may be derived from our advice. We request that you, the user, very care-fully review your specific individual case.

Regardless of their nature, the information and promotional state-ments contained in this product catalog and, in paticular, the descriptions, photographs, illustrations, drawings, samples and

information relating to quality, nature, composition, performance, consumption and usability, as well as the dimensions and weights of the product portfolio, are subject to change without notice if not expressly designated as being definitive. Such information does not represent any assurance or warranty commitment of any kind. Minor deviations from the product information shall be deemed to be accepted if they are not unreasonable for the purchaser.

Subject to change without notice. Accessories depicted in illustra-tions are not included in the scope of delivery of the illustrated pro-duct. No liability is assumed for printing or typographical errors.

TRINOS Vakuum-Systeme GmbH, Goettingen

All products in this catalog can be found on our homepage in our webshop. There you will also find company news, our services and products as well as data sheets

! www.trinos.com

2 0551-999 63-0

5 0551-999 63-10

g [email protected]

TRINOS Vakuum-Systeme GmbHAnna-Vandenhoeck-Ring 4437081 GoettingenTel.: (+49) 551-999 63-0Fax: (+49) 551-999 63-10E-Mail: [email protected]: www.trinos.com

Custom Fabrications Page 17

Vacuum Chambers/Standard Page 28

ISO-KF Small Flange Components Page 58

ISO-K Clamping Flange Components Page 116

ISO-F Fixed Flange Components Page 164

CF UHV-Flange Components Page 186

COF Bolt Flange Components Page 242

Hoses and Flexible Connectors Page 252

Glass Components Page 276

Valves Page 292

Feedthroughs Page 328

Manipulators Page 364

Measuring Instruments Page 382

ISO-KF .........................................................................................................................................................................................Page 254

ISO-K ...........................................................................................................................................................................................Page 265

CF .................................................................................................................................................................................................Page 271

Viewports ...................................................................................................................................................................................Page 279

Optical Glass ..............................................................................................................................................................................Page 285

Angle Valves...............................................................................................................................................................................Page 295

In-line Valves ..............................................................................................................................................................................Page 306

Venting Valves ...........................................................................................................................................................................Page 311

Gate Valves ................................................................................................................................................................................Page 314

Ball Valves ...................................................................................................................................................................................Page 318

Pneumatic Accessories .............................................................................................................................................................Page 323

Electrical Feedthroughs ............................................................................................................................................................Page 331

Multi-pin .....................................................................................................................................................................................Page 342

Thermocouple ...........................................................................................................................................................................Page 345

Combi-Feedthroughs .......................................................................................................................................Page 348

Coaxial Feedthroughs ..............................................................................................................................................................Page 349

Fluid Feedthroughs ...................................................................................................................................................................Page 357

Special Feedthroughs ...............................................................................................................................................................Page 361

Accessories Page 390

Screws and Bolts Page 393

Vacuum Grease, Thread Lubricant, Vacuum-Oil .................................................................................................................Page 391

Content:

Within a matter of years, a vision had been transformed into one of the leading manufacturers of custom products for the vacuum industry.

Today, TRINOS manufactures standard and specialty compo-nents, assemblies, recipients, as well as complete systems for all potential vacuum technology applications on some 5,000 m2 of floor space.

One of the foundations of our success is the concept of uniting all processes that relate to vacuum chambers under one roof: Applications advice, engineering, manufacturing, quality assu-rance, assembly and on-site service.

A further pillar of our success consists of our over 150 em-ployees and trainees, whose extraordinary enthusiasm and commitment enables them to develop new solutions for our customers time and time again.

Visions of Vacuum

The formation of TRINOS in 1997 marked the beginning of a success story. Originally established as a distributor of vacuum components, TRINOS is today the partner of choice when the need is for one-stop shopping for solutions involving high and ultra high vacuum applications.

Our technology edge is your advantage

Service

We are geared toward satisfying the needs of our customers. In addition to manufacturing and distribution of our products, we also offer a variety of services.

q We can handle complete engineering of your vacuum system, chamber or assembly for you, including the production of drawings and FEM calculations.

q Our cleanroom affords contamination-free assembly proces-ses in a low-particulate environment.

q Plasma cleaning is employed to free surfaces of organic contamination by means of a low-pressure plasma.

q To keep process interruptions as short as possible in the event of malfunctions, TRINOS can set up a consignment warehouse at your company. This means that all relevant parts will be available on an ad-hoc basis, thus shortening the delivery time for our products to zero.

q And, of course, our technicians would also be pleased to come to you: Our Vacuum Express service clears up acute defects as quickly as possible on site. This includes local leak detection, a welding service and other vacuum repairs.

Advice right from the very beginning!

Your idea – Implemented by us!

It all begins with your idea for a very special vacuum chamber or assembly. Our seasoned team of professionals then takes this idea and ensures that the end result will be a high-quality product that satisfies your wishes

TRINOS unites applications advice, engineering, manufacturing, assembly, quality assurance and on-site service under one roof.

Our vacuum specialists can even find solutions for your very speci-fic requirements. Physicists, engineers, technicians and manufac-turing planners work hand in hand to produce chambers for even out-of-the-ordinary applications, ranging all the way to complete systems in accordance with your specifications. Moreover, we are also able to integrate every feasible specialty component into our planning process and manufacture it in house.

Products from TRINOS are employed in process vacuum appli-cations that range all the way to ultra high vacuum, as well as for the overpressure range with official acceptance. Technical drawings are produced in accordance with your specifications, including FEM calculations and 3D visualizations upon request.

Project managers, design engineers, technicians and physicists are your points of contact; this means that all information always reaches the correct destination.

Manufacturing – Precision and flexibility make for a special breed of products!

Our extensive machinery and equipment is operated by quali-fied skilled personnel who are characterized by a high level of flexibility and professional knowledge. We check the quality of the manufactured products at every stage in the manufacturing process. All production steps are documented, enabling them to be verified at any time.

We achieve our high quality, precision and flexibility through in-novative manufacturing technologies, which enable us to steadily broaden our technology edge.

Machining

q 5-axis lath machining/milling centers

q 5-axis milling centers

q CNC drilling machines

q CNC saws

q Manual lathes and milling machines

Welding

q TIG, MIG/MAG welding

q Microplasma, laser welding

q Orbital welding technology

q Electron beam welding

Cleaning, surface treatment

q Large blasting system

q Ultrasonic Cleaning

q Plasma Cleaning

q Bakeout and/or cleaning annealing

q Glass bead blasting, chemical etching, electropolishing

q Painting

Putting ourselves to the test – Quality assurance!

TRINOS is certified under DIN:ISO 9001:2000.

We have all tools that are needed to deliver a product that satisfies your requirements:

q Component measurement in a constant-temperature room

q Residual gas analysis of vacuum chambers and components

q Bakeout and degassing annealing of our products

q 100% helium leak detection on welds

Quality assurance

q Helium leak detection

q Residual gas analysis

q 3D coordinate measuring machine

q Surface permeability measurement

q 3D FARO index arm

q Boroscope camera

Fast and secure – Worldwide shipping!

If the need is to add a vacuum component to your system or your chamber, our selection of over 4,500 products and inventory of over 100,000 components is available to you. Shipment can be made immediately and worldwide.

Ongoing growth has transformed TRINOS into Europe’s largest component supplier. Our customers include numerous OEMs, for whom we pick and pack our consignments to satisfy their needs and mark them in accordance with their specifications.

10 Catalog 2010Tel: +49 (0)551/99963-0 · www.trinos.com

Materials

Materials

The demands that are placed upon a material can be highly varied in vacuum technology. Depending upon the application in questi-on, the ambient conditions and the vacuum to be achieved, it will be necessary to review the requirements that the materials have to satisfy.

Indicated below are key requirements that have to be reviewed:

q Sufficient mechanical strength throughout the entire ap-plication temperature range

Example: The atmospheric pressure on evacuated chamber com-ponents amounts to around 10 N/mm2. This results in a force of 100,000 N on 1 m2 of surface area. In addition to structural integrity, it will also be necessary to review whether deformation of functional surfaces could impair functionality

q High gas-tightness Example: In principle, every material is gas permeable. The va-

lues range from “too low to be measured” to “unsuitable for vacuum applications.” The entire process of gas permeability is also termed permeation. It is a function of material, type of gas and ambient conditions – especially temperature. Permeation must be taken into consideration if elastomer seals are used. The permeation rate for atmospheric air at a relative humidity of 60% calculates to around 4 × 10-6 mbar × l/s for an FPM seal having a nominal diameter of DN 500 ISO-K. Consequently, an ultimate pressure of better than 10-7 mbar will rarely be achieved in typical vacuum systems incorporating FPM seals.

q Low inherent vapor pressure, high melting and boiling points

Example: Example: An excessive inherent vapor pressure will restrict ultimate vacuum pressure. In addition to the vacuum sui-tability of oils and greases, it is also necessary to take into con-sideration the inherent vapor pressure of metals or their partial pressures in alloys. In the case of brass, the partial pressure of zinc will limit the maximum permissible temperature to around 100°C in high vacuum.

q Clean surfaces, low foreign gas content, easy degasability Example: Example: Clean surfaces are a basic prerequisite. How-

ever every surface that has been exposed to ambient air will be covered by an adsorbent layer. In order to achieve a low ultimate pressure, it is necessary to remove as much of this layer as pos-sible. Moreover, as little inherent or foreign gases as possible should be desorbed from the volume of the material. A monolay-er of absorbed gas corresponds to a gas volume of around 0.4 mbar × l/m2. Given a pipe that is closed at both ends having a diameter of 50 cm and a length of 100 cm (surface area approx. 2 m2, volume approx. 200 l), releasing the monolayer will produ-ce a pressure rise of around 4 × 10-3 mbar. And this does not yet take into consideration the fact that the actual surface area will always be greater than the geometric surface area.

q Good temperature resistance, modified expansion properties Example: The differing thermal expansions will limit the maxi-

mum permissible temperature to around 150°C in connection with the combination of aluminum seal and stainless steel flan-ge. The sealing effect will often deteriorate after cool-down from excessive temperatures.

q Corrosion-resistance, chemical resistance Example: Many coating processes necessitate chemically ac-

tive process gases. It is therefore necessary to check whether the gases or gas mixtures that are being employed will attack components or seals. Thin-walled components such as metallic bellows, in particular, are at risk of corrosion. Their service life might have to be determined by means of testing.

Moreover, special applications could necessitate that further requi-rements be placed upon the materials.

Catalog 2010 11Tel: +49 (0)551/99963-0 · www.trinos.com

Materials

Stainless steel

Stainless steel is the material of choice in vacuum technology. Stainless steel possesses sufficient strength for flange connections – even in conjunction with bakeout processes –, it can be welded in a vacuum-suitable manner, and its surface is sufficiently passiva-

ted, thus offering enough protection for many fields of application.The following tables show the chemical compositions of the stain-less steels that are customarily employed in vacuum technology.

If the material designations in accordance with AISI (American Iron and Steel Institute) are employed, it should be noted that only ap-proximate comparisons are possible with the European material numbers (see Tables 1 and 2). However these differences are only

marginal for vacuum applications. In the case of special require-ments, their interchangeability must be assessed on the basis of the concrete case in question.

Material Number

C [≤%] Cr [%] Ni [%] Mo [%] Other Si [<%] Mn [≤%] P [≤%] S [≤%]

1.4301 0,07 17,5 – 19,5 8 – 10,5 - N ≤ 0,11 1 2 0,045 0,015

1.4305 0,1 17 - 19 8 - 10 - Cu ≤ 1, N ≤ 0,11 1 2 0,045 0,15 – 0,35

1.4306 0,03 18 – 20 10 – 12 - N ≤ 0,11 1 2 0,045 0,015

1.4307 0,03 17,5 – 19,5 8 – 10,5 - N ≤ 0,11 1 2 0,045 0,015

1.4401 0,07 16,5 – 18,5 10 – 13 2 – 2,5 N ≤ 0,11 1 2 0,045 0,015

1.4404 0,03 16,5 – 18,5 10 – 13 2 – 2,5 N ≤ 0,11 1 2 0,045 0,015

1.4429 0,03 16,5 – 18,5 11 – 14 2,5 – 3 N 0,12 – 0,22 1 2 0,045 0,015

1.4435 0,03 17 – 19 12,5 – 15 2,5 – 3 N ≤ 0,11 1 2 0,045 0,015

1.4541 0,08 17 – 19 9 – 12 - Ti (5 × C) – 0,7 1 2 0,045 0,015

1.4571 0,08 16,5 – 18,5 10,5 – 13,5 2 – 2,5 Ti (5 × C) – 0,7 1 2 0,045 0,015

Material Number

C [≤%] Cr [%] Ni [%] Mo [%] Other Si [<%] Mn [≤%] P [≤%] S [≤%]

304 0,08 18 – 20 8 – 10,5 - N ≤ 0,1 0,75 2 0,045 0,03

304L 0,03 18 – 20 8 – 12 - N ≤ 0,1 0,75 2 0,045 0,03

316 0,08 16 – 18 10 – 14 2 – 3 N ≤ 0,1 0,75 2 0,045 0,03

316L 0,03 16 – 18 10 – 14 2 – 3 N ≤ 0,1 0,75 2 0,045 0,03

316LN 0,03 16 – 18 10 – 14 2 – 3 N 0,1 – 0,16 0,75 2 0,045 0,03

Material Number

0,2% Proof Stress Rp 0,2 at 20°C

[N/mm2]

0,2% Proof Stress Rp 0,2 at 300°C

[N/mm2]

Tensile Strength Rm at 20°C

[N/mm2]

Thermal Expansion between 20 and 300°C

[10-6 K-1]

Service Tempera-ture in Air

[°C]Structure Magnetizability

1.4301 ≥ 210 110 520-750 17 300Austenite

(possibly ferrite content)

Yes1)

1.4306 1.4307

≥ 200 100 520-700 17 350Austenite


Yes1)

1.4401 ≥ 220 127 530-680 17 300Austenite


Less Pronounced1)

1.4404 ≥ 220 118 530-680 17 400Austenite


Less Pronounced1)

1.4429 ≥ 280 155 580-780 17 400 Austenite No2)

1.4435 ≥ 220 119 550-700 17 400 Austenite No2)

1.4541 ≥ 200 136 520-720 17 400Austenite


Yes1

1.4571 ≥ 220 145 540-690 18 400Austenite


Yes1)

Table 1: Chemical composition of stainless steels under the European materials designations pursuant to EN 10 088, Part 1

Table 2: Chemical composition of stainless steels under the AISI (American Iron and Steel Institute) materials designations

Table 3: Properties of stainless steels

1) Can be easily magnetized in quenched state. Magnetizability increases as strain hardening rises.2) Can become magnetic as strain hardening rises.


Materials

Material 1.4301: Basic chrome-nickel steel type. Very good cold working properties. Good weldability. Good corrosion resistance. Polishable. Highly suitable for vacuum applications.

Material 1.4305: Its high percentage of sulfur results in good machinability, but also in less resistance to corrosion than 1.4301. Not weldable. Moderately suitable for vacuum applications.

Material 1.4306, 1.4307: Low-carbon version of 1.4301 with similar properties. Due to its low carbon content, it is weldable in all dimensions, without being susceptible to intercrystalline corrosion. Very highly suitable for vacuum applications.

Material 1.4401: Very good cold working properties. Good weldability. The addition of molybdenum makes it more resistant to non-oxidizing acids and media containing chloride ions than 1.4301. Polishable. Highly suitable for vacuum applications.

Material 1.4404: Low-carbon version of 1.441 with similar properties. Due to its low carbon content, it is weldable in all dimensions, without being susceptible to intercrystalline corrosion. Very highly suitable for vacuum applications.

Material 1.4429: Properties similar to those in 1.4435, however greater strength as a result of its higher nitrogen content, which additionally stabilizes the austenitic structure. Very highly suitable for vacuum applications.

Material 1.4435: Properties similar to those in 1.4404. Its higher molybdenum content provides greater resistance to non-oxidizing acids and media containing chloride ions than 1.4404. Very highly suitable for vacuum applications.

Material 1.4541: Properties similar to those in 1.4301, however not polishable. Stabilized due to its titanium content; can therefore be welded in all dimensions, without being susceptible to intercrystalline corro-sion. Not polishable. Highly suitable for vacuum applications.

Material 1.4571: Properties similar to those in 1.4401, however not polishable. Stabilized due to its titanium content; can therefore be welded in all dimensions, without being susceptible to intercrystalline corro-sion. Not polishable. Highly suitable for vacuum applications.

Material 1.4429 ESU/ESR: Same properties as 1.4429, however outstandingly suitable for vacuum applications. Flanges from TRINOS of 1.4429 ESU/ESR are additionally forged and satisfy the strict specifications of the CERN European Organization for Nuclear Research.

ESU/ESR (Electro Slag Remelting process): The ESR method ena-bles dense, low-segregation stainless steels of high chemical and structural purity to be produced under controlled, reproducible pro-cess conditions. The primary smelting ingot is electrically remelted in the ESR furnace. One electrical pole is located at the primary ingot, the opposite pole at the base of the water-cooled crucible. Positioned between the poles is slag that has been heated to above the melting point of the stainless steel by means of resistive hea-ting. Metallic droplets that are cleaned of non-metallic impurities through contact with the liquid slag precipitate out from the bot-tom of the primary ingot. Large inclusions disappear almost com-pletely as they pass through the slag. The remaining inclusions are small and distributed virtually uniformly over the secondary ingot. Stainless steel that has been cleaned by means of the ESR method is characterized by its extremely high density and homogeneity.

Austenitic steels are non-magnetic and easy to weld. In the an-nealed state, they are characterized by very high ductilities that are retained even at extremely low temperatures. They tend to be highly cold work-hardened, especially in connection with higher carbon contents. Portions of the structure can transform into ma-gnetizable strain-induced martensite, i.e. the material becomes slightly magnetic.Moreover, the structure of austenitic steels can contain ferrite. Fer-rite is magnetic, making this material slightly magnetic.

Stabilized steels contain titanium or niobium, which bind exuded carbon when welded, thus preventing the formation of chromium carbides. The formation of chromium carbides would reduce the chromium content at the grain boundaries, making this material susceptible to intercrystalline corrosion. In the case of welded de-signs that incorporate sheet metal thicknesses of around. 6 mm or more, low-carbon (C ≤ 0.03) or stabilized stainless steels should be employed. The titanium carbides severely limit polishability

Magnetizability: A fully austenitic structure can not be magne-tized. As a result of strong deformations, portions of the previously unmagnetized austenitic structure can transform into martensite. Martensite is magnetic, making this material slightly magnetic. The tendency to form strain-induced martensite increases with rising strain-workability. Higher nickel and nitrogen contents stabilize the austenitic structure, thus largely avoiding the tendency toward magnetization in the strain-formed state. The strain hardening and the martensite can be reduced through solution annealing.Small percentages of delta-ferrite can be produced in the welding deposit when austenitic stainless steel is welded. Although they combat susceptibility to hot cracking, they are magnetic. The del-ta-ferrite content will essentially be a function of the ratio of the ferrite formers chromium, molybdenum, silicon and niobium to the austenite formers nickel, nitrogen, carbon and manganese. Only a portion of the ferrite content can be lowered through heat treat-ments, thus reducing magnetizability.


Materials

Heat treatments: The annealing temperature of austenitic stain-less steels is around 1050°C. Due to the risk of intercrystalline cor-rosion through the precipitation of chromium carbide and embritt-lement through the sigma phase that forms, the temperature range between 900°C and 450°C has to be traversed quickly.Completed vacuum components can be annealed under vacuum within the temperature range of 950 to 1050°C. In particular, this will clean the surfaces of any remaining hydrocarbons (cleaning annealing), manufacturing-related hydrogen in the volume will outgas (hydrogen reduction annealing) and magnetizability will decline (demagnetization annealing). Moreover, any chromium carbide that may be present and the sigma phase in the structure will dissolve (solution annealing).In the case of metallically sealed flanges, annealing can lead to an undesired reduction in knife-edge hardness. When metallic seals are employed, the knife edges could buckle and lose their functio-nality. We therefore recommend flange material 1.4429 ESU/ESR in connection with annealing. This extreme hardness will assure sufficiently hard knife edges.

Corrosion: Corrosion is a function of various factors, which means that all information relating to corrosion resistance can only serve as guidelines and general guidance. Although this information is intended to simplify selection of the stainless steel, it can by no means be deemed to represent a warranty, as it cannot be applied directly to real-world operating situations.Temperature and higher concentrations, mechanical stresses or surface damage, for example, can accelerate corrosion. The ab-sence of oxygen, too, prevents the formation of a new passivating layer of chromium oxide, which means that there is no corrosion protection. Moreover, impurities can also promote corrosion.In actual practice, it is usually chlorine ions and other halogen ions that initiate pitting, crevice and stress-cracking corrosion. What happens is that the passive layer is locally penetrated and corrosi-on progresses locally. Thin-walled components, in particular, such as metallic bellows, are at risk for these types of corrosion. Their service life might have to be determined on the basis of trial and error.

Seal materials

Elastomer seals are gas permeable in principle. The entire gas permeability process is termed permeation, and will be a function of the material, the type of gas and the ambient conditions in ques-tion – in particular temperature. Moreover, elastomers outgas. In the case of vacuum-suitable elastomers, the outgassing flow will decrease over time in such a manner that a constant flow of perme-ation gas will occur given a sufficiently long evacuation period.

Permeation and outgassing are a function of diffusion. A high gas density will produce slower outgassing, which results in a longer duration until a constant permeation gas flow is achieved. Alt-hough this duration can easily amount to several hundred hours, it can be strongly accelerated by bakeout.Some of the factors that determine the achievable ultimate pressu-re include the type, extent and quantity of the elastomers emplo-yed. FPM material has low gas permeability for air. In the case of a seal having a nominal diameter of DN 500 ISO-K, the permeation rate for atmospheric air having a relative humidity of 60% can be calculated as around 4 × 10-6 mbar × l/s. In the case of vacuum systems with FPM seals, a typical ultimate pressure of around 10-7 mbar can be achieved.

Elastomer seals are reusable, as they experience only elastic defor-mation. They require a contact pressure of several N/mm2, which will already be exceeded by atmospheric pressure on the flange in the case of sufficiently large nominal diameters.

The properties of elastomer seals can change as a result of un-favorable storage conditions or improper handling. Parameters to be avoided include UV radiation, oxygen, ozone, heat, moisture, solvents or mechanical stress. To assure that their properties will be retained to the greatest possible extent, we recommend the fol-lowing ambient conditions for storage:

q Temperature range: 5 to 25°Cq Avoid temperature fluctuationsq Relative humidity approx. 65%q Store in dark room or in opaque containersq Chemical-free atmosphere


Materials

Designa-tion

Base ElastomerCustomary Trade Name

Temperature Range

[°C] Properties3) 4)

FKM, FPM Fluoro rubber Viton® -15 to 200

q Extremely resistant to petroleum-based oils, aliphatic and aromatic hydrocarbons as well as chlorinated hydrocarbons, concentrated and diluted acids and weak bases

q Outstanding temperature resistance

q High mechanical values

q Superb aging resistance

q Typically achievable ultimate pressure: 10-7 mbar

NBRAcrylonitrile butadiene rubber, nitrile rubber

Perbunan® -25 to 120

q Resistant to petroleum-based oils, hydraulic oils, lubricants, gasoline as well as other aliphatic hydrocarbons, diluted acids and bases

q High wear resistance and stability

q Very good helium-tightness


EPDMEthylene propylene

rubberDutral® -50 to 130

q High resistance to hot water and steam

q Very good resistance to aging and ozone

q Good temperature stability

q Very good resistance to oxidizing agents

q no resistance to aliphatic and aromatic hydrocarbons and petroleum products


VMQ Silicon rubber Silopren®,Silikon -55 to 200q Superb temperature resistance, however not in the case of hot water or steam


CR Polychloroprene rubber Neopren® -5 to 120

q Chemical and physical properties comparable to NBR

q Resistance to petroleum-based oils approximately the same as NBR


Table 4: Properties of elastomer materials

3) Information relating to resistance should be used only as a guideline, as it is provided solely for the purpose of general information. Although this information is intended to simplify selection of the elastomer, it can by no means be deemed to represent a warranty, as it cannot readily be applied to real-world operating conditions. Service life might have to be determined on the basis of trial and error.

4) The indicated ultimate pressures are based upon experience showing what can be achieved in a well designed vacuum system. They could be higher or lower in individual cases.

Metallic seals require high contact pressures. They are plastically deformed when assembled and can therefore be used only once.

Their hardness has to be lower than that of the flanges, thus al-lowing them to adapt to the microstructure and produce a metallic ultra high vacuum-tight connection.

Aluminum:Aluminum seals with aluminum edged seal rings are employed for ISO-KF and ISO-K flanges. What are used are soft-annealable alu-minum-silicon alloys that require a contact pressure of around 100 N/mm2. The differing thermal expansion will limit the maximum permissible working temperature in connection with the combina-tion of aluminum seal and stainless steel flanges to around 150°C. Following exposure to excessive temperatures, the sealing effect will often deteriorate after cool-down.

Copper:Copper has around the same thermal expansion as austenitic stain-less steel. Copper seals are used as gaskets (CF flanges) or wire seals (COF flanges). The copper must be of low-oxygen design, i.e. OF (Oxygen Free) or OFHC (Oxygen Free High Conductivity) must be employed. The presence of oxygen will lead to what is called “hydrogen disease”; i.e. when heat treated, the hydrogen will react with oxygen and the water that is thus produced will burst the structure.

Copper seals require a contact pressure of at least 200 N/mm2. Their maximum permissible working temperature in air is 200°C; silver coating increases this to a maximum of 450°C. Soft-annealed copper seals require less contact pressure. They should be used in connection with viewports, in particular, in order to keep assembly-related stresses as low as possible.


General Terms and Conditions of Sale and Supply

I. Proposal

In the absence of any separate contractual agreements, Pfeiffer Vacuum, as the supplier, shall effect deliveries and provide services exclusively under the terms and conditions set forth herein. Under no circumstances shall any contradictory terms and conditions of purchase of Purchaser become a part of the contract – and neither by acceptance of an order –, even if not expressly refuted. These General Terms and Conditions of Sale and Supply shall apply to both the present transaction as well as to any and all future business transactions.

II. Proposal and Contract

The information contained in price lists, catalogs and advertising media relating to Pfeiffer Vacuum’s performances shall not represent any proposals. Such documents as illustrations, dra-wings, weights and measurements pertaining to a proposal shall be subject to change without noti-ce and shall be only approximately definitive, unless they have been expressly stipulated as being binding. Verbal advice, collateral agreements and assurances of whatever nature shall be void unless they have been confirmed in writing by Pfeiffer Vacuum as being agreed. Minor variances from product specifications shall be deemed to have been approved. In the absence of any special agreement, a contract shall only be deemed to have been entered into upon Pfeiffer Vacuum’s written confirmation of order or upon delivery of the goods. Pfeiffer Vacuum reserves all ownership rights and copyrights to its samples, cost estimates, plans, drawings and similar information of either a tangible or intangible nature – including information in electronic form –, as well as to any and all other documents; said items shall only be made available to third parties with the written consent of Pfeiffer Vacuum.

III. Scope of Supply

Pfeiffer Vacuum’s written confirmation of order shall be definitive with respect to the scope of and all further details relating to the supply; in the case of a time-limited proposal from Pfeiffer Vacuum and its acceptance by Purchaser within the stipulated term, said proposal shall be deemed to be definitive in the absence of timely confirmation of order by Pfeiffer Vacuum. Any collateral agree-ments or modifications shall require written confirmation by Pfeiffer Vacuum.

IV. Prices and Payment

1. Prices shall be either ex works or ex consignment warehouse, including loading at the factory or consignment warehouse, however exclusive of packing materials and statutory value added tax. Pfeiffer Vacuum shall be entitled to invoice packing materials at cost and reserves the right to require return of its transport packing materials free of charge, provided said packing materials have been delivered free of charge by Pfeiffer Vacuum. No credit shall be given for returned packing materials.

2. In the absence of any special agreement, payment shall be made in cash at Pfeiffer Vacuum’s payment office, with no deductions. The following payment terms shall be applicable with res-pect to systems and plants: 30 % advance payment upon receipt of the confirmation of order 40 % as soon as Purchaser has been notified that the major components are ready for shipment 20 % upon deliveryand the remainder within a period of one month subsequent to passage of the risk.

3. Purchaser shall only be entitled to withhold payments or set them off against any counterclaims if said counterclaims are undisputed or have become legally final.

4. The minimum order value shall be to ¡ 100.00.

5. Should the goods be returned, Pfeiffer Vacuum shall invoice the required functional testing and refurbishment at a rate of 10% of the net value of the goods, however not less than ¡ 100.00.

6. In the event of cancellation of an order, Pfeiffer Vacuum shall fundamentally charge a cancel-lation fee in the amount of 15% of the total value of said order. Cancellation shall be made in writing and shall only be possible with 14 days subsequent to our confirmation of order.

V. Delivery Term / Delayed Delivery

1. The delivery term shall be based upon the agreements reached between the contracting parties. Compliance with the delivery term by Pfeiffer Vacuum shall necessitate that all commercial and technical questions between the contracting parties have been clarified and that Purchaser has satisfied all of its obligations, e.g. submittal of the documents, approvals or releases to be pro-cured by Purchaser, or that an agreed advance payment has been made. Should this not be the case, the delivery term shall be appropriately extended. This shall not apply to the extent that Pfeiffer Vacuum is responsible for said delay.

2. Compliance with the delivery term shall be subject to correct and timely delivery of raw materials and supplies to Pfeiffer Vacuum.

3. The delivery term shall be deemed to have been observed if the supplied items have left Pfeiffer Vacuum’s factory or notification of readiness for shipment has been made prior to the expiration of the delivery term. Should acceptance testing be required, the date of the acceptance testing – with the exception of justified refusal to perform said acceptance testing – shall be definitive, or alternatively notification of readiness for acceptance testing.

4. Should shipment or acceptance testing of the supplied item be delayed due to reasons for which Purchaser is responsible, Purchaser shall be charged for the costs incurred as a result of said delay, beginning one month subsequent to notification of readiness for shipment or acceptance testing.

5. Should failure to observe the delivery term be caused by force majeure, strikes, lock-outs or other events beyond the control of Pfeiffer Vacuum, the delivery term shall be appropriately extended. This shall also apply if a sub-contractor is subjected to such circumstances. Nor shall the above-described circumstances be the responsibility of Pfeiffer Vacuum if they arise during the course of an existing delay. In important cases, Pfeiffer Vacuum shall inform Purchaser as soon as possible of the beginning and end of such hindrances.

6. Purchaser shall be entitled to withdraw from the contract without notice it has finally become impossible for Pfeiffer Vacuum to provide the entire performance prior to passage of the risk.

Furthermore, Purchaser shall also be entitled to withdraw from the contract if the execution of a part of an order has become impossible or if Purchaser has a legitimate interest in refusing partial delivery. Should this not be the case, Purchaser shall pay the contractual price relating to the par-tial delivery. The same shall also apply in the event of Pfeiffer Vacuum’s inability to perform. Apart from this, Point IX. 2 shall apply. Should the impossibility or inability to perform occur during the course of delay in acceptance testing or should Purchaser solely or predominantly be responsible for said circumstances, Purchaser shall be obligated to provide compensation therefor.

7. Should Pfeiffer Vacuum be delayed in making delivery and should Purchaser incur damages therefrom, Purchaser shall be entitled to demand liquidated damages for delayed performance, to the exclusion of any and all further claims. Said liquidated damages shall amount to 0.5% of the invoice amount per full week of delay, however not more than 5% of the value of that portion of the entire delivery that cannot be utilized in a timely fashion or according to the contact as a result of said delay. Any and all further claims arising from the delay in delivery shall be governed exclusively by Point IX. 2. Should Purchaser grant the supplier in delay an adequate term for performance – with due regard to statutory exceptions – Purchaser shall be entitled to withdraw from the contract within the framework of statutory provisions if said adequate term is not obser-ved. At the demand of Pfeiffer Vacuum, Purchaser shall agree to state within an adequate term whether it intends to exercise its right to withdraw from the contract.

8. Should shipment be delayed at the request of Purchaser, Purchaser shall be charged the storage costs incurred therefor, beginning one month subsequent to notification of readiness for ship-ment; in the case of storage at the Pfeiffer Vacuum factory or consignment warehouse, however, at least 0.5% of the invoice amount for each month. Following stipulation and expiration of an adequate term, Pfeiffer Vacuum shall additionally be entitled to otherwise dispose of the item to be supplied and to effect delivery to Purchaser subject to a reasonable extended term.

VI. Passage of Risk and Acceptance Testing

1. The risk shall pass to Purchaser at the latest upon shipment of the items to be supplied, even if partial deliveries are made or if Pfeiffer Vacuum has assumed other performances, e.g. shipping costs for delivery and installation. Upon request by Purchaser, Pfeiffer Vacuum shall insure the consignment at Purchaser’s expense against theft, breakage, shipping, fire or water damage, as well as any and other insurable perils. Should acceptance testing be performed, the time of said acceptance testing shall be definitive for passage of the risk. Said acceptance testing shall be performed without delay on the date set for the acceptance testing, or alternatively subsequent to notification by Pfeiffer Vacuum of readiness for acceptance testing. The presence of an imma-terial defect or deficiency shall not entitle Purchaser to refuse to perform acceptance testing.

2. Should shipment or acceptance testing be delayed or not be performed due to circumstances for which Pfeiffer Vacuum is not responsible, the risk shall pass to Purchaser upon the day that noti-fication of readiness for shipment or acceptance testing is made. Pfeiffer Vacuum shall undertake to obtain the insurance coverages requested by Purchaser at Purchaser’s expense.

3. Purchaser shall be required to accept delivered items even in the presence of immaterial defects or deficiencies, without prejudice to the rights set forth in Point VIII.

4. Partial deliveries shall be permissible if not unreasonable for Purchaser.

VII. Retention of Title

1. Pfeiffer Vacuum shall retain title to the supplied item until any and all payments have been received – including payments for any performances that might additionally be owed – arising from the contract for supply and until such time as payment has been received for any and all claims against Purchaser or members of its corporate group by Pfeiffer Vacuum or members of its corporate group. Should Purchaser be a dealer or a manufacturer, it shall be revocably authorized to incorporate the supplied items within the framework of proper business transactions and/or to process and/or resell said supplied items. Purchaser herewith assigns to Pfeiffer Vacuum its entit-lements under the resale transaction (in the ratio of the value of Pfeiffer Vacuum’s goods to the manufacturing costs of the entire product in connection with their incorporation or processing). Should said assignment exceed 120% of the claims secured by it, Pfeiffer Vacuum shall release the collateral at Purchaser’s written request.

2. Pfeiffer Vacuum shall be entitled to insure the supplied item against theft, breakage, fire, water or other perils at Purchaser’s expense unless Purchaser shall have evidenced that it has taken out such insurance coverage itself.

3. Purchaser shall not be entitled to either pledge or use as collateral the supplied item. Purchaser shall be required to inform Pfeiffer Vacuum immediately in the event of confiscation or other third-party dispositions.

4. Should Purchaser be in breach of the contract, in particular in the case of payment default, Pfeif-fer Vacuum shall be entitled to retrieve the supplied item following issuance of a warning notice, and Purchaser shall be required to surrender said supplied item. Pfeiffer Vacuum’s right to assert its right to retention of title or to attachment of the item shall not constitute a withdrawal from the contract on the part of Pfeiffer Vacuum.

5. Petition for the initiation of insolvency proceedings shall entitle Pfeiffer Vacuum to withdraw from the contract and to demand the immediate return of the supplied item.

VIII. Warranty

Subject to the exclusion of any further claims – and as governed by Point IX – Pfeiffer Vacuum shall warrant against material defects and deficiencies in title as follows:Material defects

1. All components that prove to be deficient due to circumstances existing prior to the time of pas-sage of the risk shall be remedied or re-supplied free of charge by Pfeiffer Vacuum at its option. Pfeiffer Vacuum shall be notified of such defects and deficiencies in writing without delay. § 377 of the German Commercial Code (“HGB”) shall apply accordingly. Replaced components shall become the property of Pfeiffer Vacuum. In the case of major products from third-party suppliers, Pfeiffer Vacuum’s liability shall be limited to assignment of its claims against said third-party suppliers, provided that said claims are not subject to the statute of limitations and are not significantly lower than those claims being asserted by Pfeiffer Vacuum.


General Terms and Conditions of Sale and Supply

2. Following written notification, Purchaser shall provide Pfeiffer Vacuum with the required time and opportunity to remedy any and all defects or effect any and all replacement supplies that Pfeiffer Vacuum shall deem necessary; otherwise, Pfeiffer Vacuum shall not be liable for the consequences thereof. Only in urgent cases endangering operational safety or to prevent unrea-sonable high damages, whereby Pfeiffer Vacuum shall be notified immediately, shall Purchaser have the right to remedy the defects itself or to have them remedied by third parties, and to demand restitution for the necessary expenses incurred.

3. Of the costs resulting from repair or replacement, Pfeiffer Vacuum – should the complaint prove to be legitimate – shall bear the costs of the replacement item, including shipping (however excluding express deliveries and deliveries to other countries), as well as the reasonable costs as-sociated with removal and reinstallation, as well as the costs of any required provision of Pfeiffer Vacuum’s fitters and helpers which may equitably be necessitated on the basis of the individual case in question.

4. Within the framework of statutory provisions, Purchaser shall have the right to withdraw from the contract should Pfeiffer Vacuum – with due consideration being given to statutory excep-tions – allow an appropriate term to repair or replace, of which it has been notified in writing, to lapse. In the case of only immaterial defects or deficiencies, Purchaser shall only be entitled to claim a reduction of the contractual price. There shall otherwise be no right to a reduction of the contractual price.

5. No warranty shall be assumed in the following cases, in particular:Use of non-genuine Pfeiffer Vacuum parts, unsuitable or improper use, faulty or defective assem-bly and/or start-up by Purchaser or by third parties, natural wear and tear, faulty or neglectful treatment, improper maintenance, unsuitable operating fluids, deficient construction work, un-suitable building substrates, chemical, electrochemical or electrical influences that are not the responsibility of Pfeiffer Vacuum.

6. Should Purchaser or a third party improperly remedy any defect, Pfeiffer Vacuum shall not be liable for the consequences resulting therefrom. The same shall also apply with respect to any alterations of the supplied item by Purchaser or third parties without the prior consent of Pfeiffer Vacuum.Deficiencies in title

7. Should the use of the supplied item lead to infringement of intellectual property rights or copy-rights in Germany, Pfeiffer Vacuum shall at its own expense assure that Purchaser shall funda-mentally be given the right of further use or that the supplied item be modified in such a way that can reasonably be expected to be acceptable to Purchaser as to ensure that the infringement of intellectual property rights or copyrights no longer exists. Should this not be possible at econo-mically reasonable terms or conditions or within a reasonable term, Purchaser shall be entitled to withdraw from the contract. Under the above-indicated prerequisites, Pfeiffer Vacuum shall also be entitled to withdraw from the contract. Furthermore, Pfeiffer Vacuum shall save and hold harmless Purchaser against undisputed or legally final claims asserted by the respective owners of intellectual property rights or copyrights.

8. Pfeiffer Vacuum’s obligations set forth in Point VIII. 7, as subject to Point IX. 2, shall be definitive in the event of a breach of intellectual property rights or copyrights. They shall only be applicable if and when •PurchasernotifiesPfeifferVacuumimmediatelyofanyassertedclaimswithrespecttotheinfrin- gement of any •intellectualpropertyrightsorcopyrights •Purchaser supports Pfeiffer Vacuum to an appropriate extent in connectionwith defending against the asserted •claimsortoanextentthatwillenablePfeifferVacuumtoperformthemodificationmeasures pursuant to Point VIII.7 •PfeifferVacuumreservestherighttoengageinalldefensivemeasures,includingout-of-court settlements •ThedeficiencyintitleisnotbaseduponaninstructiononthepartofPurchaser,and •ThelegalinfringementwasnotcausedbythefactthatPurchaserhasindependentlymodified the supplied item •orhasuseditinanon-contractualmanner

IX. Liability

1. If through the fault of Pfeiffer Vacuum the supplied item cannot be used by Purchaser in ac-cordance with the contract due to neglected or faulty execution in connection with proposals and consultations prior to or subsequent to the execution of the contract or through infringement of other collateral contractual obligations – in particular with regard to instructions for the operati-on and maintenance of the supplied item – the provisions set forth in Points VIII. and IX. 2 shall apply accordingly, to the exclusion of any and all further claims by Purchaser.

2. In the case of damages that are not incurred on the supplied item, itself, Pfeiffer Vacuum shall – for whatever legal reasons – be liable only a) In the event of willful intent b) In the event of gross negligence on the part of its owner/corporate bodies or executives c) In the event of culpable injury to life, limb or health d) In the event of defects or deficiencies that Pfeiffer Vacuum has maliciously concealed e) Within the framework of an assured warranty f) In the event of defects or deficiencies in the supplied item to the extent liability exists under the German Product Liability Act for personal injury or property damage in connection with privately utilized items.In the event of a culpable infringement of major contractual obligations, Pfeiffer Vacuum shall also be liable in the case of gross negligence on the part of non-executive employees and in the case of minor negligence, however in the latter case limited to typical damage under the contract that could reasonably be foreseen.No further entitlements shall exist.

X. Statute of LimitationsAny and all claims on the part of Purchaser – regardless of the legal grounds therefor – shall be subject to a statute of limitations of 12 months. This term shall not recommence for spare or

replacement parts supplied within this period; the original warranty term for the supplied item shall instead continue to be definitive. Claims for indemnification pursuant to Points IX. 2.a) - d) and f), as well as claims under the German Product Liability Act, shall be subject to the statutory terms.

XI. Use of Software

Should software be included in the scope of supply, Purchaser shall be granted a non-exclusive right to use said supplied software, including the documentation pertaining thereto. Said software shall be provided for utilization on the supplied item for which it is intended. Utilization of the software on more than one system shall be prohibited. Purchaser shall only be entitled to copy, modify, trans-late or convert the software from object code to source code within the legally permissible scope (§§ 69 a ff. of the German Copyright Law [“UrhG”]). Purchaser agrees to refrain from removing manufacturer’s information or Pfeiffer Vacuum’s information – in particular copyright notices – or from modifying them without express prior approval from Pfeiffer Vacuum. Any and all other rights to the software and the documentation, including copies thereof, shall remain with Pfeiffer Vacuum and/or the software supplier. The issuance of sub-licenses shall not permissible.

XII. Applicable Law/Venue (does not apply to consumers)

1. Any and all legal relationships between Pfeiffer Vacuum and Purchaser shall be subject exclu-sively to the pertinent laws of the Federal Republic of Germany. This shall also apply with respect to foreign business transactions. The application of the U.N. Convention on Contracts for the International Sale of Goods (CISG) shall be excluded.

2. The venue shall be the court having jurisdiction for Pfeiffer Vacuum’s domicile. However Pfeif-fer Vacuum shall also be entitled to bring action at Purchaser’s primary domicile.

Custom Fabrications

18 Catalog 2010Phone: 1-800-248-8254 · www.trinos.com

HV chambers – As varied as their applications

TRINOS supplies a broad range of vacuum chambers for industry and re-search. They are fabricated from all potential materials and can be used for applications requiring high and ultra high vacuum as well as overpressure. When building a chamber for overpressure, the manufacturing process is overseen by an independent third party. Our customers’ requirements serve as the basis for designing and dimensioning the chambers. We have produced chambers up to 2500 mm in diameter and 11 m in length.

The quality of our manufacturing operation continues right through to finishing. A cleanroom enables chambers and components to be assembled and put into operation in a low-particulate environment.

We use ultrasound baths, a plasma cleaning system and vacuum anne-aling furnaces in order to achieve maximum cleanliness. Moreover, ma-gnetic permeability can be minimized by means of suitable annealing.

HV Vacuum Chambers

Catalog 2010 19Phone: 1-800-248-8254 · www.trinos.com

UHV chambers

At TRINOS, a dedicated team of employees is responsible for manufacturing UHV chambers. These specialists are thoroughly familiar with both the requirements of UHV technology as well as the materials that are employed.

We supply numerous prominent universities and major research institutions – both in Germany and worldwide – with UHV

recipients, cryostats and accelerator components, for example. Upon request, TRINOS can offer demagnetization annealing, bakeout, residual gas analysis at ultimate vacuum, as well as dimensional inspection in a constant-temperature room.

UHV Vacuum Chambers


Custom Components

TRINOS can implement every feasible custom component. Whether the need is for special-length spacers or an additional connection on one of our standard components, we can supply every conceivable component. If necessary, manufactured in a matter of days by our Express Cell.

Custom Components


Electrical feedthroughs

In addition to the popular standard electrical feedthroughs, each year TRINOS supplies hundreds of custom feedthroughs that are designed to customer specifications. We would be pleased to compile a proposal for you for combination feedthroughs that you can combine from our popular welding adapters. However

our product portfolio also includes custom feedthroughs that are manufactured to customer specifications.

The product line is rounded out by ceramic components, as well as glass-to-metal and ceramic-to-metal transitions.

Electrical feedthroughs


Manipulators

Manipulators

At TRINOS, experienced engineers and technicians are available to you for designing custom manipulators. We can either appro-priately modify standard manipulators in accordance with your requirements, or we can offer you a complete new design.

All manipulators can be supplied in motorized form, making it easy to integrate them into your system control concept. Upon request, an FEM analysis can be supplied for every component.


We can supply every conceivable form of flexible metal hoses, bellows as well as edge-welded bellows. Even during the engineering phase, we can assist you in designing and selecting flexible components. We procure the bellows from numerous ma-nufacturers, while engineering of the assembly, production of the

Bellows Components

Bellows Components

connecting components and welding of the components, as well as a pressure and/or vacuum test, are handled by TRINOS. We can quickly fabricate flexible metal hoses in special lengths having diameters that range from DN 6 to DN 100, including all popular connection flanges (KF, ISO-K, CF, clamping collars, VCR, etc.)


TRINOS supplies mechanical and electrical assemblies that are designed to customer specifications. Trained employees are available for this purpose. The scope of delivery includes mecha-nical, electrical and vacuum functional testing. Thanks to its high level of vertical integration, TRINOS is your optimum partner for all of your requirements – from development and engineering to prototyping right through to one-off and series production.

A cleanroom with 70 m2 of assembly floor space is available for assembly operations that place high demands upon cleanliness. Our cleanroom is Class 7 with fewer than 10,000 particles per cubic meter. Should it be necessitated by your requirements, it can also be operated as a Class 5 cleanroom (1,000 particles).

Assemblies

Assemblies


Precision Mechanical Components

Precision Mechanical Components

Your components are measured optically, by laser or feeler in a constant-temperature room. The packing for the components (including in the cleanroom) is in accordance with your specifica-tions.

TRINOS manufactures precision mechanical components that are designed to customer specifications from stainless steel, aluminum, as well as all popular specialty materials. Numerous CNC pro-duction machines are available for this purpose. A temperature-controlled manufacturing environment enables us to satisfy your accuracy requirements.

NOTES

Vacuum Chambers/Standard


28 Catalog 2010Tel: +49(0)551/99963-0 · www.trinos.com

Vacuum chambers/Standard

High Vacuum Chambers, Cubic, KBH ...........................30

High Vacuum Chamber, Horizontal, KHH .....................32

Ultra-High Vacuum Chamber, Horizontal, KHU .............34

High Vacuum Chamber, Vertical, KVH ..........................36

Low Vacuum Chamber, Vertical, KVG ...........................38

Spherical Vacuum Chamber, Basic Body without Ports ....40

Spherical Vacuum Chamber, with Ports ........................42

Modular Chamber, Bell ................................................44

Modular Chamber, Extension .......................................45

Modular Chamber, Extension with Ports .......................46

Modular Chamber, Base Plate ......................................47

Modular Chamber, Cover .............................................48

Mounting Table ............................................................49

CF Ports ........................................................................50

ISO-KF Ports .................................................................52

ISO-K Ports ...................................................................53

ISO-F Ports ...................................................................54

NPT Ports .....................................................................55

Contents


Catalog 2010 29Tel: +49(0)551/99963-0 · www.trinos.com

TRINOS offers you eight standard chamber models:

q High vacuum chamber, cubical, Type “820KBH” *

q High vacuum chamber, horizontal, Type “820KHH” *

q Ultra high vacuum chamber, horizontal, Type “820KHU” *

q High vacuum chamber, vertical, Type “820KVH” *

q Medium vacuum chamber, vertical, Type “820KHG” *

q Spherical vacuum chamber, basic chamber without ports, Type “820KKG” *

q Spherical vacuum chamber, with ports, Type “420KKG”

q Modular chamber

* = Your choice of ports

Standard chamber, individually configurableSelect the chamber model and chamber size. You will find ISO-KF, ISO-K, ISO-F and CF ports under “Chamber Ports.” You can obtain a cost overview by adding together the prices of the chamber and your desired chamber ports. The price additionally includes:

q Engineering (approval drawing; 3D model upon request)

q Manufacturing (with vertically aligned chamber ports)

q Surface finish (glass bead-blasted)

q Quality control (assembly/helium leak testing)

After placing an order, you will receive a drawing indicating the se-lected chamber ports. All that we will additionally need from you is the desired positioning of the ports. We will begin manufacturing your chamber after approval of the drawing.

In addition to the basic version, we can also offer you an alternative chamber material, for example, a different surface finish, water coo-ling, further chamber sizes and lengths, interior or exterior mounting angles and further options.

Talk with us. We would be pleased to create a proposal that is cus-tom-tailored to your needs.


Select the matching accessories from our extensive product line. These include feedthroughs, viewports, manipulators, adapters and much more. Do you also need custom components? Talk with us. We can fabricate custom components in accordance with your sketch or we can develop the matching solution for you.

We offer two versions of spherical vacuum chambers: With freely selectable ports (Type “820KKG”) and with defined ports (Type “420KKG”).

Modular chambers do not require any clamps or bolts. The ele-ments are sealed off from one another by means of gravity or by the external atmospheric pressure during vacuum operation. Should you want a different flange system, we can also equip this series of chambers with ISO-K, ISO-F, CF, COF or ASA flanges. You can use seals and connection elements from our standard line to assemble the modules.

Modular chambers can be intercombined as desired within the no-minal diameter ranges and flange system. You can subsequently eit-her expand your system or replace modules.

Please observe the following in planning and designing your vacuum system:

q The pressures indicated below in the product descriptions are absolute pressures, at an ambient pressure of 1000 mbar.

q The minimum achievable ultimate pressure in the entire system will be governed by any number of factors, in particular by the pump system, the desorption rates of the interior surfaces and the pump-down time. The minimum pressures indicated in the product descriptions are based upon experience showing what can be achieved in a well designed vacuum system. They could be higher or lower in individual cases. In addition, permeati-on must also be taken into consideration if elastomer seals are used. It will be governed by the material, temperature and type of gas in question. You will find typical ultimate pressures of the elastomers in the chapter entitled “Materials.”

q The highest and lowest permissible temperatures in the entire system will be governed by the lowest high temperature and highest low temperature of the components involved.

q The flange connections and components were developed in or-der to achieve vacuum-tight connections. They can only assume limited mechanical loads. In designing a vacuum system, it will therefore be necessary to review whether static or dynamic loads will have to be assumed by additional elements, e.g. holders.



High Vacuum Chambers, Cubic, KBHq Pressure range: Stainless steel door: 1 × 10-7 to 1000 mbar; plexiglas door: 1 × 10-5 to 1000 mbar q Leak rate: < 1 × 10-8 mbar × l/sq Temperature range: -15 to 150 °Cq Chamber material: Stainless steel, 304/1.430 or betterq Door material: Stainless steel or plexiglas

q Door seal material: FPMq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blastedq Door hinges: Choice of left or right

Included with order:

q Cubic chamber bodyq Door-flange and door with hingesq Quick clamps to prestress the door sealq Chamber feet for mountingq Preparation of a technical drawing with your choice of portsq Cleaning for immediate vacuum usageq Helium leak testing

Ports and accessories are listed in the relevant catalog chapters. The total cost of the chamber can be calculated by adding the costs of the chamber, ports and accessories.

When you place an order, we will prepare a technical drawing of the chamber with your ports, accesso-ries, and any other options selected. Once you have approved the drawing, we will begin manufacturing your chamber.

Accessories:

Options:

q Chamber portsq Viewportsq Feedthroughs

Chamber material alternatives:q Other stainless steelsq Aluminum

Surface finish:q Polishedq Electropolished

Water cooling systems:q Weld-on pipes or channelsq Double-wall chamberq Pillow plate/thermplate

Further options:q Additional chamber sizesq Support brackets inside chamberq Fastening elements on inner or outer chamber wallsq Door-flange and door with hinges on both ends of chamber



Nom. Size [mm]

A [mm]

Item No. Price €

300 300 820KBH0300-S 4000,00

500 500 820KBH0500-S 6500,00

750 750 820KBH0750-S 10500,00

1000 1000 820KBH1000-S 19000,00

Nom. Size [mm]

A [mm]

Item No. Price €

300 300 820KBH0300-G 4000,00

500 500 820KBH0500-G 6500,00

750 750 820KBH0750-G 10500,00

1000 1000 820KBH1000-G 19000,00

AA

A

Stainless Steel Door

Plexiglas Door



High Vacuum Chamber, Horizontal, KHHq Pressure range: 1 × 10-7 to 1000 mbarq Leak rate: < 1 × 10-8 mbar × l/sq Temperature range: -15 to 150 °Cq Chamber material: Stainless steel, 304/1.430 or better

q Door seal material: FPMq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blastedq Door hinges: Choice of left or right


q Main body: Cylindrical tube with a dished head welded on one endq Door-flange and door with hingesq Quick clamps to prestress the door sealq Chamber feet for mountingq Preparation of a technical drawing with your choice of portsq Cleaning for immediate vacuum usageq Helium leak testing



Accessories:

Options:




Water cooling systems:q Weld-on pipes or channelsq Double wallq Pillow plate/thermplate

Further options:q Additional chamber sizesq Support brackets inside chamberq Fastening elements on inner or outer chamber wallsq Door-flange and door with hinges on both ends of chamber



Nom. Size [mm]

A [mm]

B = Cylinder Length [mm]

Item No. Price €

200 200 300 820KHH0200-300 2750,00

200 200 400 820KHH0200-400 2850,00

200 200 500 820KHH0200-500 2950,00

250 250 400 820KHH0250-400 2985,00

250 250 500 820KHH0250-500 3085,00

250 250 600 820KHH0250-600 3185,00

300 300 500 820KHH0300-500 3400,00

300 300 600 820KHH0300-600 3500,00

300 300 700 820KHH0300-700 3600,00

400 400 500 820KHH0400-500 4150,00

400 400 600 820KHH0400-600 4250,00

400 400 700 820KHH0400-700 4350,00

500 500 600 820KHH0500-600 5800,00

500 500 700 820KHH0500-700 5900,00

500 500 800 820KHH0500-800 6000,00

600 600 600 820KHH0600-600 7000,00

600 600 700 820KHH0600-700 7200,00

600 600 800 820KHH0600-800 7400,00

800 800 1000 820KHH0800-1000 11500,00

800 800 1250 820KHH0800-1250 11800,00

800 800 800 820KHH0800-800 11200,00

1000 1000 1000 820KHH1000-1000 15000,00

1000 1000 1250 820KHH1000-1250 13500,00

1000 1000 1500 820KHH1000-1500 14000,00

1200 1200 1250 820KHH1200-1250 16000,00

1200 1200 1500 820KHH1200-1500 16800,00

1200 1200 1750 820KHH1200-1750 17600,00

B Ø A



Ultra-High Vacuum Chamber, Horizontal, KHUq Pressure range: 1 × 10-12 to 1000 bar (metal seals) 1 × 10-7 to 1000 mbar (FPM seals)q Leak rate: < 1 × 10-10 mbar × l/s (metal seals) < 1 × 10-8 mbar × l/s (FPM seals)q Temperature range: -15 to 300 °C (FPM seals)* -15 to 150 °C (metal seals)*q Chamber material: Stainless steel, 304/1.430 or better

q Door seal material: OFHC copper; FPM upon requestq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blasted *Please observe limits for seal materials, screws and ports


q Main body: Cylindrical tube with a dished head welded on one endq Door-flange with bolted coverq Chamber feet for mountingq Preparation of a technical drawing with your choice of portsq Cleaning for immediate vacuum usageq Helium leak testing

Ports and accessories are listed in the relevant catalog chapters. The total cost of the chamber can be calculated by adding the costs of the chamber, ports and accessories.Ports and accessories are listed in the relevant catalog chapters. The total cost of the chamber can be calculated by adding the costs of the chamber, ports and accessories.


Accessories:

Options:





Further options:q Additional chamber sizesq Support brackets inside chamberq Fastening elements on inner or outer chamber walls



Nom. Size [mm]

A [mm]

B = Cylinder Length [mm]

Item No. Price €

200 200 300 820KHU200-300 2700,00

200 200 400 820KHU200-400 2890,00

200 200 500 820KHU200-500 3100,00

250 250 400 820KHU250-400 3600,00

250 250 500 820KHU250-500 3780,00

250 250 600 820KHU250-600 3990,00

300 300 500 820KHU300-500 4590,00

300 300 600 820KHU300-600 4820,00

300 300 700 820KHU300-700 5070,00

400 400 500 820KHU400-500 6300,00

400 400 600 820KHU400-600 6560,00

400 400 700 820KHU400-700 6800,00

500 500 600 820KHU500-600 8500,00

500 500 700 820KHU500-700 8860,00

500 500 800 820KHU500-800 9160,00

600 600 600 820KHU600-600 10900,00

600 600 700 820KHU600-700 11300,00

600 600 800 820KHU600-800 11500,00

B Ø A



High Vacuum Chamber, Vertical, KVHq Pressure range: 1 × 10-7 to 1000 mbarq Leak rate: < 1 × 10-8 mbar × l/sq Temperature range: -15 to 150 °Cq Chamber material: Stainless steel, 304/1.430 or better

q Door seal material: FPMq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blasted


q Main body: Cylindrical tube with one end welded to a flat stainless steel floorq Cover flange with quick clamps to prestress the door sealq Chamber feet for mountingq Preparation of a technical drawing with your choice of portsq Cleaning for immediate vacuum usageq Helium leak testing



Accessories:

Options:





Further options:q Other chamber heightsq Support brackets inside chamberq Fastening elements on inner or outer chamber wallsq Lifting gear for removal of cover



A

B

Nom. Size [mm] A [mm] B [mm] Item No. Price €

200 200 100 820KVH0200-100 2300,00

200 200 200 820KVH0200-200 2400,00

200 200 300 820KVH0200-300 2500,00

250 250 100 820KVH0250-100 2800,00

250 250 200 820KVH0250-200 2900,00

250 250 300 820KVH0250-300 3050,00

300 300 100 820KVH0300-100 3260,00

300 300 200 820KVH0300-200 3410,00

300 300 300 820KVH0300-300 3570,00

400 400 100 820KVH0400-100 4220,00

400 400 200 820KVH0400-200 4380,00

400 400 300 820KVH0400-300 4530,00

500 500 100 820KVH0500-100 5650,00

500 500 200 820KVH0500-200 5820,00

500 500 300 820KVH0500-300 5965,00

500 500 400 820KVH0500-400 6070,00

600 600 100 820KVH0600-100 7290,00

600 600 200 820KVH0600-200 7440,00

600 600 300 820KVH0600-300 7600,00

800 800 300 820KVH0800-300 10970,00

800 800 400 820KVH0800-400 11320,00

800 800 500 820KVH0800-500 11670,00

1000 1000 500 820KVH1000-500 15500,00

1000 1000 600 820KVH1000-600 15840,00

1000 1000 700 820KVH1000-700 16190,00

Nom. Size [mm] Item No. Price €

400 820KVH0400-H 800,00

500 820KVH0500-H 1000,00

600 820KVH0600-H 1200,00

800 820KVH0800-H 1400,00

1000 820KVH1000-H 1600,00

Lift SupportNom. Size [mm] Item No. Price €

400 820KVH0400-S 900,00

500 820KVH0500-S 1100,00

600 820KVH0600-S 1300,00

800 820KVH0800-S 2000,00

1000 820KVH1000-S 2500,00

Hinge



Low Vacuum Chamber, Vertical, KVGq Pressure range: 1 × 10-3 to 1000 mbarq Leak rate: < 1 × 10-5 mbar × l/sq Temperature range: 0 to 40 °Cq Chamber material: Stainless steel, 304/1.430 or better

q Cover material: Plexiglasq Cover seal material: FPMq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blasted


q Main body: Cylindrical tube with a plate welded onto one endq Plexiglass cover with handleq Chamber feetq Preparation of a technical drawing with your choice of portsq Cleaning for immediate vacuum usageq Helium leak testing



Accessories:

Options:




Further options:q Other chamber heightsq Support brackets inside chamberq Fastening elements on inner or outer chamber walls



A

B

Nom. Size [mm]

A [mm]

B [mm]

Item No. Price €

200 213 100 820KVG200-100 1200,00

200 213 200 820KVG200-200 1250,00

200 213 300 820KVG200-300 1300,00

250 267 100 820KVG250-100 1400,00

250 267 200 820KVG250-200 1470,00

250 267 300 820KVG250-300 1540,00

300 318 100 820KVG300-100 1800,00

300 318 200 820KVG300-200 1900,00

300 318 300 820KVG300-300 2000,00

400 400 100 820KVG400-100 2600,00

400 400 200 820KVG400-200 2700,00

400 400 300 820KVG400-300 2800,00

500 500 100 820KVG500-100 4000,00

500 500 200 820KVG500-200 4100,00

500 500 300 820KVG500-300 4200,00

600 600 100 820KVG600-100 5500,00

600 600 200 820KVG600-200 5650,00

600 600 300 820KVG600-300 5800,00



Spherical Vacuum Chamber, Basic Body without Ports


q Basic spherical bodyq Preparation of a technical drawing with your choice of portsq Cleaning for immediate vacuum usageq Helium leak testing



Accessories:

Options:




Water cooling systems:q Weld-on pipes or channelsq Double wall

Further options:q Support brackets inside chamberq Fastening elements on inner or outer chamber wallsq Chamber feet

The basic body can be equipped with your choice of ports (listed starting on page 50)

q Pressure range: 1 × 10-12 to 1000 bar (metal seals) 1 × 10-7 to 1000 mbar (FPM seals)q Leak rate: < 1 × 10-10 mbar × l/s (metal seals) < 1 × 10-8 mbar × l/s (FPM seals)q Temperature range: -15 to 300 °C (FPM seals)* -15 to 150 °C (metal seals)*

q Chamber material: Stainless steel, 304/1.430 or betterq Other sphere diameters available upon requestq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blasted*Please observe limits for seal materials, screws and ports



Nom. Size [mm]

A [mm]

Item No. Price €

160 156 820KKG160 1400,00

230 226 820KKG230 1500,00

320 323 820KKG320 1670,00

400 400 820KKG400 1840,00

500 493 820KKG500 2200,00

Ø Aq Chamber material: Stainless steel, 304/1.430 or betterq Other sphere diameters available upon requestq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blasted*Please observe limits for seal materials, screws and ports



Spherical Vacuum Chamber, with Ports


q Basic spherical body including portsq Cleaning for immediate vacuum usageq Helium leak testing

Additional accessories are listed in the relevant chapters of this catalog.

Accessories:

Options:

q Viewportsq Feedthroughs



Water cooling systems:q Weld-on pipes or channelsq Double wall

Further options:q Support brackets inside chamberq Fastening elements on inner or outer chamber wallsq Chamber feet

Includes CF ports as listed in the table on the next page

q Operating temperature: -15 to 100 °Cq Pressure range: 10-12 to 1000 mbar*q Helium leak rate: < 1 × 10-10 mbar × l/s*Please observe limits for seal materials and screws

q Chamber material: Stainless steel, 304/1.430 or betterq Other sphere diameters available upon requestq Interior surface finish: Glass bead blastedq Exterior surface finish: Glass bead blasted



Nom. Size [mm]

Inner Diameter [mm]

DN 16 DN 40 DN 63 DN 100 DN 160Item No. Price €

160 156 8 - 6 - - 420KKG160-S100 3800,00

215 213 - 8 - 6 - 420KKG200-S150 4300,00

300 323 - 8 - 6 - 420KKG300-S200 4600,00

400 400 - 8 4 1 6 420KKG400-S250 6400,00

500 493 - 8 4 1 6 420KKG500-S300 7100,00

Vakuum Chambers/Modular


Modular Chamber, Bell

q Pressure range: 1 × 10-6 to 1000 mbar q Leak rate: < 1 × 10-7 mbar × l/sq Operating temperature: -15 to 100n °Cq Bakeable up to 150 °Cq Chamber material: 304/1.430 stainless steelq Seal material: FPM q Surface finish: Glass bead blastedq Item no. suffix -vp: Viewport; including seal, screws and glassq optional: different Flange connection (ISO-K, ISO-F, CF, COF or ASA)

A

B

The flange system operates without clamps or screws. Elements are sealed through gravity or, during use, by the opera-ting pressure. Alternatively, these chambers can be equipped on request with ISO-K, ISO-F, CF, COF or ASA flanges.

Nom. Size [mm]

A [mm]

B [mm]

Item No. Price €

300 300 230 820KMG300 1700,00

300 300 230 820KMG300-vp 2200,00

400 500 410 820KMG400 2200,00

400 500 410 820KMG400-vp 2700,00

450 750 650 820KMG450 2700,00

450 750 650 820KMG450-vp 3200,00

500 750 640 820KMG500 3300,00

500 750 640 820KMG500-vp 3800,00

600 750 620 820KMG600 4000,00

600 750 620 820KMG600-vp 4500,00

Stainless Steel 304/1.4301



q Pressure range: 1 × 10-6 to 1000 mbar q Leak rate: < 1 × 10-7 mbar × l/sq Operating temperature: -15 to 100 °Cq Bakeable up to 150 °Cq Chamber material: 304/1.430 stainless steelq Seal material: FPM q Surface finish: Glass bead blastedq Item no. suffix -vp: Viewport; including seal, screws and glassq optional: different Flange connection (ISO-K, ISO-F, CF, COF or ASA)

The flange system operates without clamps or screws. Elements are sealed through gravity or, during use, by the opera-ting pressure. Alternatively, these chambers can be equipped on request with ISO-K, ISO-F, CF, COF or ASA flanges.

Modular Chamber, Extension

A

Nom. Size [mm]

A [mm]

Item No. Price €

300 150 820KMV300-150 1120,00

300 300 820KMV300-300 1220,00

400 150 820KMV400-150 1520,00

400 300 820KMV400-300 1640,00

450 150 820KMV450-150 2200,00

450 300 820KMV450-300 2250,00

500 150 820KMV500-150 2550,00

500 300 820KMV500-300 2600,00

600 150 820KMV600-150 3290,00

600 300 820KMV600-300 3400,00




Modular Chamber, Extension with Ports

q Pressure range: 1 × 10-6 to 1000 mbar q Leak rate: < 1 × 10-7 mbar × l/s q Operating temperature: -15 to 100 °Cq Bakeable up to 150 °Cq Chamber material: 304/1.430 stainless steelq Seal material: FPM q Surface finish: Glass bead blastedq optional: different Flange connection (ISO-K, ISO-F, CF, COF or ASA)

AA

Nom. Size [mm]

A [mm]

Port Flange Size [DN]

Number of Ports Item No. Price €

300 150 40 4 820KMV300-iso-4 1750,00

300 150 40 6 820KMV300-iso-6 2040,00

300 150 40 8 820KMV300-iso-8 2350,00

400 150 40 4 820KMV400-iso-4 2060,00

400 150 40 6 820KMV400-iso-6 2330,00

400 150 40 8 820KMV400-iso-8 2600,00

450 150 40 4 820KMV450-iso-4 2800,00

450 150 40 6 820KMV450-iso-6 3100,00

450 150 40 8 820KMV450-iso-8 3400,00

500 150 40 4 820KMV500-iso-4 3150,00

500 150 40 6 820KMV500-iso-6 3450,00

500 150 40 8 820KMV500-iso-8 3750,00

600 150 40 4 820KMV600-iso-4 3900,00

600 150 40 6 820KMV600-iso-6 4200,00

600 150 40 8 820KMV600-iso-8 4450,00

Nom. Size [mm]

A [mm]


Number of Ports Item No. Price €

300 150 40 4 820KMV300-cf-4 1800,00

300 150 40 6 820KMV300-cf-6 2150,00

300 150 40 8 820KMV300-cf-8 2500,00

400 150 40 4 820KMV400-cf-4 2120,00

400 150 40 6 820KMV400-cf-6 2420,00

400 150 40 8 820KMV400-cf-8 2720,00

450 150 40 4 820KMV450-cf-4 2900,00

450 150 40 6 820KMV450-cf-6 3200,00

450 150 40 8 820KMV450-cf-8 3500,00

ISO-KF Ports: Stainless Steel 304/1.430

CF Ports: Stainless Steel 304L

The flange system operates without clamps or screws. Elements are sealed through gravity or, during use, by the operating pressure. Alternatively, these chambers can be equipped on request with ISO-K, ISO-F, CF, COF or ASA flanges.



Modular Chamber, Base Plate

q Pressure range: 1 × 10-6 to 1000 mbar q Leak rate: < 1 × 10-7 mbar × l/s q Operating temperature: -15 to 100 °Cq Bakeable up to 150 °Cq Chamber material: 304/1.430 stainless steelq Seal material: FPM q Surface finish: Glass bead blastedq optional: different Flange connection (ISO-K, ISO-F, CF, COF or ASA)

A

A

B

With ISO-K Pump Port: Stainless Steel 304/1.4301

Modular Chamber, Extension with Ports, CF Ports: Stainless Steel 304LNom. Size

[mm]A

[mm]Port Flange Size

[DN]Number of Ports Item No. Price €

500 150 40 4 820KMV500-cf-4 3200,00

500 150 40 6 820KMV500-cf-6 3550,00

500 150 40 8 820KMV500-cf-8 3850,00

600 150 40 4 820KMV600-cf-4 3950,00

600 150 40 6 820KMV600-cf-6 4250,00

600 150 40 8 820KMV600-cf-8 4600,00

Nom. Size [mm]

A [mm]

B [mm]


Item No. Price €

300 470 150 ISO 100 820KMB300 910,00

400 550 150 ISO 100 820KMB400 1120,00

450 550 150 ISO 100 820KMB450 1180,00

500 650 150 ISO 160 820KMB500 1550,00

600 800 150 ISO 160 820KMB600 2040,00




Modular Chamber, Cover

q Pressure range: 1 × 10-6 to 1000 mbar q Leak rate: < 1 × 10-7 mbar × l/s q Operating temperature: -15 to 100 °Cq Bakeable up to 150 °Cq Chamber material: 304/1.4301 stainless steelq Seal material: FPM q 304/1.4301 stainless steelq Other flange system (ISO-K, ISO-F, CF, COF or ASA) upon request

A


Nom. Size [mm]

A [mm]

Item No. Price €

300 85 820KMD300 750,00

400 100 820KMD400 900,00

450 110 820KMD450 1100,00

500 130 820KMD500 1260,00

600 135 820KMD600 1740,00




Mounting Tableq Square and round tables available q Hole pattern: 25 x 25 mm (0.98 x 0.98 in)q Thread: M6q Surfaces: Precision milled or polished

ABAluminum: Round

Aluminum: Square

Stainless Steel 304/1.4301: Round

Stainless Steel 304/1.4301: Square

Nom. Size [mm]

A [mm]

B [mm]

Item No. Price €

300 275 25 810KTO300-R 425,00

400 375 25 810KTO400-R 600,00

450 425 25 810KTO450-R 700,00

500 475 25 810KTO500-R 850,00

600 575 25 810KTO600-R 1100,00

Nom. Size [mm]

A [mm]

B [mm]

Item No. Price €

300 200 25 810KTO300-E 300,00

400 275 25 810KTO400-E 450,00

500 325 25 810KTO500-E 550,00

600 400 25 810KTO600-E 750,00

Nom. Size [mm]

A [mm]

B [mm]

Item No. Price €

300 275 17 820KTO300-R 650,00

400 375 17 820KTO400-R 900,00

450 425 17 820KTO450-R 1100,00

600 575 17 820KTO600-R 1800,00

Nom. Size [mm]

A [mm]

B [mm]

Item No. Price €

300 200 17 820KTO300-E 600,00

400 275 17 820KTO400-E 900,00

500 325 17 820KTO500-E 1100,00

600 400 17 820KTO600-E 1500,00

A

A

B

Ports


CF, Fixed Port: 304L Stainless Steel

CF, Fixed Port with Thread: 304L Stainless Steel

CF Ports

q Pressure range: 1 bar to 10-12 mbar*q Temperature range: -196 to 300 °C*q Other flange materials available upon request*Please observe limits for seal materials and screws

ØA

ØA

Flange Size [DN]

A* [mm]

Item No. Price €

16 16 820KPC016 150,00

25 24 820KPC025 152,00

40 37 820KPC040 155,00

50 47,5 820KPC050 185,00

63 66 820KPC063 270,00

75 70 820KPC075 300,00

100 104 820KPC100 315,00

130 123,7 820KPC130 345,00

160 155 820KPC160 440,00

200 200 820KPC200 530,00

250 250 820KPC250 700,00

300 300 820KPC300 950,00

Flange Size [DN]

A* [mm]

Item No. Price €

16 16 820KPC016-G 160,00

25 24 820KPC025-G 165,00

40 37 820KPC040-G 165,00

50 47,5 820KPC050-G 195,00

63 66 820KPC063-G 280,00

75 70 820KPC075-G 315,00

100 104 820KPC100-G 335,00

130 123,7 820KPC130-G 370,00

160 155 820KPC160-G 470,00

200 200 820KPC200-G 570,00

250 250 820KPC250-G 740,00

300 300 820KPC300-G 990,00

Prices apply to straight ports. Please keep in mind that permissible operating pressure and temperature depend on the seal material. The ports listed below can be used to mount measurement devices and smaller feedthroughs. If you wish to mount pumps or other heavy equipment, the ports must be const-ructed differently.

*The minimum inner diameter is yielded by the combination of flange, tube and seal. The open diameter may be locally reduced by welding seams or manufacturing-related deviations from the nominal flange size.


Ports


CF, Blank Flange for Ports: 304L Stainless SteelFlange Size

[DN]Item No. Price €

16 820KBC016 20,00

25 820KBC025 30,00

40 820KBC040 30,00

50 820KBC050 50,00

63 820KBC063 60,00

75 820KBC075 90,00

CF, Rotatable: 304L Stainless Steel

CF, Rotatable with Thread: 304L Stainless Steel

Flange Size [DN]

A* [mm]

Item No. Price €

16 16 820KPD016 158,00

25 24 820KPD025 160,00

40 37 820KPD040 165,00

50 47,5 820KPD050 180,00

63 66 820KPD063 276,00

75 70 820KPD075 300,00

100 104 820KPD100 350,00

130 123,7 820KPD130 385,00

160 155 820KPD160 500,00

200 200 820KPD200 610,00

250 250 820KPD250 850,00

300 300 820KPD300 1150,00

Flange Size [DN]

A* [mm]

Item No. Price €

16 16 820KPD016-G 165,00

25 24 820KPD025-G 170,00

40 37 820KPD040-G 175,00

50 47,5 820KPD050-G 238,00

63 66 820KPD063-G 290,00

75 70 820KPD075-G 320,00

100 104 820KPD100-G 370,00

130 123,7 820KPD130-G 410,00

160 155 820KPD160-G 535,00

200 200 820KPD200-G 650,00

250 250 820KPD250-G 1167,00

300 300 820KPD300-G 1200,00

Flange Size [DN]

Item No. Price €

100 820KBC100 90,00

130 820KBC130 130,00

160 820KBC160 130,00

200 820KBC200 215,00

250 820KBC250 365,00

300 820KBC300 605,00



Ports


ISO-KF Ports: 304/1.4301 Stainless Steel

ISO-KF Blind Flange for Ports: 304/1.4301 Stainless Steel, with FPM centering ring and clamps

ISO-KF Ports

q Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C*q Other flange materials available on request*Please observe limits for seal materials and fastening elements

Flange Size [DN]

A* [mm]

Item No. Price €

16 16 820KPI016 135,00

25 24 820KPI025 136,00

40 40 820KPI040 140,00

50 51 820KPI050 150,00

Flange Size [DN]

Item No. Price €

16 820KBI016 10,00

25 820KBI025 15,00

40 820KBI040 20,00

50 820KBI050 30,00

Prices apply to straight ports. Please keep in mind that permissible operating pressure and temperature depend on the seal material. The ports listed below can be used to mount measurement devices and smaller feedthroughs. If you wish to mount pumps or other heavy equipment, the ports must be construc-ted differently.

ØA

ØA


Ports


ISO-K Ports: 304/1.4301 Stainless Steel

ISO-K Blind Flanges for Ports: 304/1.4301 Stainless Steel, with FPM centering ring and clamps

ISO-K Ports

Flange Size [DN]

A* [mm]

Item No. Price €

63 70 820KPI063 230,00

80 83 820KPI080 240,00

100 102 820KPI100 245,00

160 153 820KPI160 330,00

200 213 820KPI200 410,00

250 267 820KPI250 510,00

Flange Size [DN]

Item No. Price €

63 820KBI063 60,00

80 820KBI080 80,00

100 820KBI100 80,00

160 820KBI160 120,00

200 820KBI200 240,00

250 820KBI250 270,00

Prices apply to straight ports. Please keep in mind that permissible operating pressure and temperature depend on the seal material. The ports listed below can be used to mount measurement devices and smal-ler feedthroughs. If you wish to mount pumps or other heavy equipment, the ports must be constructed differently.

q Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C*q Other flange materials available upon request*Please observe limits for seal materials and fastening elements

ØA

ØA


Ports


ISO-F Ports: 304/1.4301 Stainless Steel

ISO-F Ports

q Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 300 °C*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A* [mm]

Item No. Price €

63 70 820KPF063 300,00

80 83 820KPF080 320,00

100 102 820KPF100 350,00

160 153 820KPF160 480,00

200 213 820KPF200 530,00

250 267 820KPF250 680,00


ØA

ØA


Ports


NPT Port, Male: Stainless Steel

NPT Port, Female: Stainless Steel

NPT Ports

Port Size [mm]

A [mm]

Item No. Price €

1/8“ 2,0 820KPN0125-M 100,00

1/4“ 4,3 820KPN0250-M 100,00

1/2“ 9,4 820KPN0500-M 110,00

3/4“ 14,7 820KPN0750-M 125,00

1“ 20.3 820KPN1000-M 145,00

Port Size [mm]

A [mm]

Item No. Price €

1/8“ 2,0 820KPN0125-F 100,00

1/4“ 4,3 820KPN0250-F 105,00

1/2“ 9,4 820KPN0500-F 115,00

3/4“ 14,7 820KPN0750-F 130,00

1“ 20,3 820KPN1000-F 165,00

q Temperature range: -196 to 300 °C**Please observe limits for seal materials and screws


ØA

ØA

ØA

ØA

NOTES

ISO-KF Small Flange Components

ISO-KF


Contents

KF Fastening Elements

ISO-KF Clamp for Elastomer Seal .................................61

ISO-KF Clamping Ring for Elastomer Seal, Plastic ..........................................................................61

ISO-KF Clamp for Metal Seals .......................................62

ISO-KF Bolt Clamp (3-Part) for Metal Seals ...................62

ISO-KF Hingeless Clamp ...............................................63

ISO-KF Clamping Ring for Elastomer Seals .......................................................63

ISO-KF Bulkhead Clamp ................................................64

ISO-KF Chain Clamp for Large ISO-KF Flanges ..............64

ISO-KF Claw Clamp ......................................................65

ISO-KF Chain Clamp, Aluminum ...................................66

ISO-KF Chain Clamp, Plastic .........................................66

KF Seals

ISO-KF Centering Ring ..................................................67

ISO-KF Centering Ring, Plastic ......................................70

ISO-KF Centering Ring without O-Ring .........................71

ISO-KF Reducer Centering Ring ....................................72

ISO-KF Outer Centering Ring ........................................73

ISO-KF Outer Centering Ring with Inner Support Ring ... 75

ISO-KF Outer Support Ring without Centering Ring .......76

ISO-KF Centering Ring with Screen ...............................77

ISO-KF Centering Ring with Sintered Metal Filter ..........78

ISO-KF O-Ring ..............................................................79

ISO-KF Helicoflex Seal ...................................................81

ISO-KF Aluminum Edged Seal .......................................81

ISO-KF Metal Seal .........................................................82

KF Components

ISO-KF Blank Flange .....................................................83

ISO-KF Large Flange, Blank Flange ...............................84

ISO-KF Glass Blank Flange ............................................85

ISO-KF Weld Ring Flange ..............................................86

ISO-KF Large Weld Ring Flange ...................................86

ISO-KF Half Nipple ........................................................87

ISO-KF Full Nipple .........................................................90

ISO-KF Elbow, 90° ........................................................91

ISO-KF Elbow, Radius, 45° ............................................92

ISO-KF Elbow, 90° ........................................................92

ISO-KF Reducer Elbow ..................................................93

ISO-KF Tee ....................................................................94

ISO-KF Reducer Tee ......................................................95

ISO-KF 4-Way Cross ......................................................96

ISO-KF Reducer Cross ...................................................98

ISO-KF 6-Way Cross ......................................................98

ISO-KF Straight Reducer ...............................................99

ISO-KF Conical Reducer ..............................................101

ISO-K/KF Straight Adapter ..........................................101

ISO-K/KF Conical Adapter ...........................................103

ISO-KF/CF Adapter .....................................................104

ISO-KF Half Nipple with External Tapering .................104

ISO-KF Half Nipple with Internal Tapering ..................105

ISO-KF Flange with Pipe Thread, without Seal, Male .....................................................105

ISO-KF Flange with Pipe Thread and FPM Seal, Male ...........................................................106

ISO-KF Flange with Pipe Thread, without Seal, Female ..................................................106

ISO-KF Flange with Pipe Thread and FPM Seal, Female .......................................................106

ISO-KF Swagelok® Adapter .........................................107

ISO-KF VCR Adapter, Female ......................................108

ISO-KF VCR Adapter, Male .........................................109

ISO-KF Flange with NPT Thread, Male ........................110

ISO-KF Flange with NPT Thread, Female .....................110

ISO-KF Adapter for PVC Hose .....................................112

ISO-KF 90° Elbow with Hose Adapter ........................112

ISO-KF Hose Clamp ....................................................113

ISO-KF Tube Compression Fitting................................113

ISO-KF Stainless Steel Pipe ..........................................114

ISO-KF Flange Caps ....................................................114

ISO-KF


ISO-KF components from TRINOS are manufactured according to DIN 28 403 and ISO 2861 in standard sizes DN 10 to DN 50 and are compatible with products from other prominent manufacturers. All components are helium leak-tested and have leakage rates of better than 10-9 mbar × l/s.

Standard components can be shipped within 24 hours; special components can be fabricated to customer specifications.

An ISO-KF (small flange) connection comprises two symmetrical flanges and an o-ring that is positioned and supported by an inner or outer centering ring. The contact pressure required for sealing is produced by means of a clamp that is placed over the tapered tigh-tening surfaces and tightened by means of a thumbscrew (Figure 1). This affords fast, efficient assembly and disassembly, without the need for tools. The flanges can be aligned about the main axis as desired.

Clamping claws are used to mount a small flange on a base plate (Figure 2), or bulkhead clamps can be employed as the clamping elements. You will find the dimensions of the holes in the product descriptions for the clamping claws and bulkhead clamps.

ISO-KF connections are suitable for pressures of up to 10-7 mbar and can also be employed for overpressures of up to 1.5 bar. The pressure range can be increased to 10-9 mbar by means of metallic seals. The significantly higher contact pressures that this requires are generated with special bulkhead clamps. The maximum possi-ble application temperature will essentially be governed by the seal material in question. You will find information about this subject in the product descriptions and in the chapter entitled “Materials.”

ISO-KF Fasteners and Components

2

The majority of ISO-KF components consist of stainless steel. Alu-minum, brass and plastic can alternatively be employed. You will find information about our stainless steels and other alternative materials for vacuum components in the chapter entitled “Materi-als.” Special cleaning methods incorporating automated industrial equipment assure smooth surfaces for components that have low outgassing rates (desorption). Welded components are glass bead-blasted or chemically etched. We can offer you alternative surface treatments such as grinding, electropolishing or annealing upon request.

1

Figure 1: ISO-KF connection with bulkhead clamp

Figure 2: ISO-KF connection to base plate by means of claw clamps

ISO-KF



q The pressures indicated below in connection with the product descriptions are absolute pressures, at an ambient pressure of 1000 mbar.

q The minimum achievable ultimate pressure in the entire system will depend upon numerous factors, especially upon the pump system, the desorption rates of the interior surfaces and the pump-down time. The minimum pressures indicated in connec-tion with the product descriptions are based upon experience, showing what can be achieved in a well designed vacuum sys-tem. They could be higher or lower in individual cases. If elasto-mer seals are being employed, it will be necessary to take their gas permeability (permeation) into consideration. It will be a function of the material, temperature and type of gas in questi-on. You will find typical ultimate pressures for elastomers in the chapter entitled “Materials.”


q The flange connections and components have been developed in order to achieve vacuum-tight connections. They can only as-sume mechanical loads to a limited extent. In designing a va-cuum system, it will therefore be necessary to review whether it will be necessary for static or dynamic loads to be assumed by additional elements, e.g. holders.

Nominal diameter DN 10KF 16KF 20KF 25KF 32KF 40KF 50KF

Outside diameter [mm] 30 30 40 40 55 55 75

A [inch] 1.18 1.18 1.57 1.57 2.17 2.17 2.95

Flange height B [mm] 5 5 5 5 5 5 5

C [mm] 3 3 3 3 3 3 3

Centering ring nose D [mm] 12,2 17,2 22,2 26,2 34,2 42,1 52,4

Typical tube dimension* E × F [mm] 14 × 2 20 × 2 24 × 2 28 × 2 38 × 2 44,5 × 2 57 × 3,2

Typical inside dia.**G [mm] 10 16 20 24 34 40,5 51

Major Dimensions of ISO-KF Components

* You will find further tube dimensions in connection with the “Welding Flange Ring” and “Flange and Flange socket” products, in particular.** The minimum inside diameter will be determined by the combination of flange, tube and centering ring. Moreover, welds and manufacturing variances from the nominal size could locally restrict the clear diameter.

C

B

F

ØE

ØA

ØD

ØG

ISO-KFFastening Elements


Aluminum ADC 12


ISO-KF Clamp for Elastomer Seal

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 62 42 16 110BSR016 3,40

20 / 25 72 52 16 110BSR025 3,90

32 / 40 90 70 16 110BSR040 4,10

50 113 90 20 110BSR050 8,20

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 62 45 17 120BSR016 25,00

20 / 25 73 53 17 120BSR025 29,00

32 / 40 90 68 17 120BSR040 33,00

50 115 90 19 120BSR050 38,00

B

A C

Plastic

ISO-KF Clamping Ring for Elastomer Seal, Plastic

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 65 47 20 130BSR016 15,00

20 / 25 79 59 20 130BSR025 17,00

32 / 40 92 74 20 130BSR040 19,00

50 123 95 23 130BSR050 28,00

A

B

C

q Suitable for use with elastomer sealsq Maximum pressure: 2.5 barq Temperature range: -196 to 200 °C*q Maximum torque on wingnut: 2 Nm

q Particularly well suited for glass flangesq Suitable for use with elastomer sealsq Maximum pressure: 1.5 barq Temperature range: -10 to 80 °C

ISO-KF Fastening Elements



Aluminum

ISO-KF Clamp for Metal Seals

ISO-KF Bolt Clamp (3-Part) for Metal Seals

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Bolts Item No. Price €

10 / 16 55 44 18 M5 x 25 120BSM016 28,00

20 / 25 68 54 18 M5 x 25 120BSM025 30,00

32 / 40 83 69 18 M5 x 25 120BSM040 33,00

50 113 93 21 M8 x 35 120BSM050 54,00

Flange Size [DN]

A [mm]

B [mm]

Screw Item No. Price €

10 / 16 48 18 M4 x 30 110BSD016 23,00

20 / 25 70 19 M6 x 30 110BSD025 25,00

32 / 40 85 23 M8 x 35 110BSD040 37,00

50 112 28 M8 x 35 110BSD050 52,00

A B

B

A C

Aluminum/Plastic

ISO-KF Quick- Release Clamp, Aluminum

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 68 45 16 110BSS016 10,00

20 / 25 80 55 16 110BSS025 12,00

32 / 40 98 70 18 110BSS040 13,00

A

B

C

q Suitable for use with elastomer sealsq Maximum pressure: 1.5 barq Temperature range: -10 to 80 °C

q Suitable for use with elastomer and metal sealsq Maximum pressure: 2.5 barq Temperature range: -196 to 300 °C q Bolts: Hexagon socket, A2-70 steelq We recommend using a screw thread lubricant

q Suitable for use with metal and elastomer seals q Maximum pressure: 1.5 barq Temperature range: -196 to 200°Cq Bolts: Hexagon socket, A2-70 steel



Aluminum ADC 12/Steel

ISO-KF Clamping Ring for Elastomer Seals

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 54 39 16 110BSB016 9,00

20 / 25 63 48 16 110BSB025 10,00

32 / 40 80 64 16 110BSB040 15,00

A

B

C


ISO-KF Hingeless Clamp

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 47 38 16 120BSG016 10,00

20 / 25 54 49 16 120BSG025 12,00

32 / 40 70 62 16 120BSG040 14,00

50 90 84 16 120BSG050 24,00

A

B

C

q Suitable for use with elastomer sealsq Maximum pressure: 1.5 barq Temperature range: -10 to 125 °Cq Compact design

q Suitable for use with elastomer seals q Compact designq Maximum pressure: 1.5 barq Temperature range: 0 to 100 °Cq Screw: Hexagon head; 7 mm



Aluminum EN AW-6082/3.2315

ISO-KF Bulkhead Clamp

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 / 16 50,8 38,1 9,2 3 5,3 110BUH016 28,85

20 / 25 60,3 48,0 9,9 3 5,3 110BUH025 32,50

32 / 40 74,6 62,0 9,3 3 5,3 110BUH040 35,10

50 94,9 82,55 10,4 4 5,3 110BUH050 40,15

Bore Holes in Base Plate

Flange Size [DN]

Bolt Circle ø Tapped Hole

Number of Tapped Holes

Core Hole for Centering

[mm]

Sealing Surface to ø [mm]

10 38,1 6 x 60° 12,2 30

16 38,1 6 x 60° 17,2 30

20 48,0 6 x 60° 22,2 40

25 48,0 6 x 60° 26,2 40

32 62,0 6 x 60° 34,2 55

40 62,0 6 x 60° 41,2 55

50 82,55 8 x 45° 52,4 75

AE

D

B

C

q Thread M5; depth: minimum 10 mm

q Suitable for use with elastomer sealsq Maximum pressure: 2.5 barq Temperature range: -196 to 200 °C*q For mounting on a base plate with KF centering ringq Screws: Hexagon head, A2-70 steel, M 5x20

Aluminum

ISO-KF Clamp f. Large ISO-KF Flanges

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 112 77 20 78 310BSK063 30,00

80 144 103 34 107 310BSK080 55,00

100 164 123 34 113 310BSK100 60,00

160 214 173 34 137 310BSK160 70,00

q For connecting two large ISO-KF flangesq Suitable for use with elastomer sealsq Temperature range: 0 to 150 °Cq Maximum pressure: 1.5 bar

AB

DC



Aluminum EN AW-6061

ISO-KF Claw Clamp

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 - 50 19 11 12 14 20 110BPR050 3,00

10 - 50 20,5 12,5 14 14 20 110BPR050-2 3,00

AB

D E

C

q Suitable for use with elastomer sealsq Short and long versions availableq Maximum pressure: 1.5 barq Temperature range: -196 to 200 °Cq Bolt: Hexagon head, A2-70 steel, M 6 x 20 mmq Maximum torque: 8 Nm

Bore Holes in Base Plate

Flange Size [DN]

Bolt Circle ø Tapped Hole Number of Tapped Holes

Core Hole for Centering

[mm]

Sealing Surface to ø [mm]

Recommended Torque

[Nm]110BPR050 110BPR050-2

10 43 mm 45 mm 4 x 90° 12,2 30 3

16 43 mm 45 mm 4 x 90° 17,2 30 3

20 53 mm 55 mm 4 x 90° 22,2 40 4

25 53 mm 55 mm 4 x 90° 26,2 40 4

32 68 mm 71 mm 4 x 90° 34,2 55 5

40 68 mm 71 mm 4 x 90° 41,2 55 5

50 88 mm 91 mm 4 x 90° 52,4 75 6

q Thread: M6; depth: minimum 6 mm



Aluminum ADC 12

ISO-KF Chain Clamp, Aluminum

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Number of Links

Item No. Price €

10 / 16 115 60 20 3 110BSK016 25,00

20 / 25 125 70 20 4 110BSK025 28,00

32 / 40 135 85 20 4 110BSK040 32,00

50 152 105 20 5 110BSK050 35,00

Plastic/Steel

Plastic/Stainless Steel

ISO-KF Chain Clamp, Plastic

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Temperature [°C/F]

Number of Chain Links

Item No. Price €

10 / 16 115 60 20 bis 60° 3 130BSK016 10,00

20 / 25 125 70 20 bis 60° 4 130BSK025 11,00

32 / 40 135 85 20 bis 60° 4 130BSK040 12,00

50 152 105 20 bis 60° 5 130BSK050 15,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Temperature [°C/F]

Number of Chain Links

Item No. Price €

16 115 60 20 bis 100° 3 130BSH016 19,00

25 125 70 20 bis 100° 4 130BSH025 22,00

40 135 85 20 bis 100° 4 130BSH040 22,50

50 152 105 20 bis 100° 5 130BSH050 28,00

ØA

B

C

ØA

BC

q Suitable for use with elastomer seals q Maximum pressure: 2.5 barq Temperature range: -10 to 100 °Cq Hand grip: Plastic or steel

q Suitable for use with elastomer sealsq Maximum pressure: 2.5 barq Temperature range: -20 to 60 °C; up to 80 °C for short periods

High temperature models BSH:q Temperature range: -20 to 100 °C; up to 150 °C for short periods

ISO-KF

Catalog 2010 67

Seals

Tel: +49(0)551/99963-0 · www.trinos.com

ISO-KF Centering Ring

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm] Item No. Price €

10 FPM 12 10 3,9 8 5 112ZRG010 3,00

16 FPM 17 16 3,9 8 5 112ZRG016 3,10

20 FPM 22 21 3,9 8 5 112ZRG020 6,50

25 FPM 26 25 3,9 8 5 112ZRG025 3,80

32 FPM 34 32 3,9 8 5 112ZRG032 5,50

40 FPM 41 40 3,9 8 5 112ZRG040 4,90

50 FPM 52 50 3,9 8 5,33 112ZRG050 6,80

10 NBR 12 10 3,9 8 5 111ZRG010 2,70

16 NBR 17 16 3,9 8 5 111ZRG016 2,80

20 NBR 22 21 3,9 8 5 111ZRG020 4,00

25 NBR 26 25 3,9 8 5 111ZRG025 3,20

32 NBR 34 32 3,9 8 5 111ZRG032 5,50

40 NBR 41 40 3,9 8 5 111ZRG040 4,60

50 NBR 52 50 3,9 8 5,33 111ZRG050 6,40

10 CR 12 10 3,9 8 5 116ZRG010 2,80

16 CR 17 16 3,9 8 5 116ZRG016 2,90

20 CR 22 21 3,9 8 5 116ZRG020 4,50

25 CR 26 25 3,9 8 5 116ZRG025 3,80

32 CR 34 32 3,9 8 5 116ZRG032 5,80

40 CR 41 40 3,9 8 5 116ZRG040 4,80

50 CR 52 50 3,9 8 5,33 116ZRG050 6,60

10 EPDM 12 10 3,9 8 5 114ZRG010 2,80

16 EPDM 17 16 3,9 8 5 114ZRG016 2,90

20 EPDM 22 21 3,9 8 5 114ZRG020 4,50

25 EPDM 26 25 3,9 8 5 114ZRG025 3,80

32 EPDM 34 32 3,9 8 5 114ZRG032 5,80

40 EPDM 41 40 3,9 8 5 114ZRG040 4,80

50 EPDM 52 50 3,9 8 5,33 114ZRG050 6,60

10 Silikon 12 10 3,9 8 5 113ZRG010 4,00

16 Silikon 17 16 3,9 8 5 113ZRG016 4,10

20 Silikon 22 21 3,9 8 5 113ZRG020 7,50

25 Silikon 26 25 3,9 8 5 113ZRG025 4,80

32 Silikon 34 32 3,9 8 5 113ZRG032 6,60

40 Silikon 41 40 3,9 8 5 113ZRG040 5,90

50 Silikon 52 50 3,9 8 5,33 113ZRG050 7,80

Aluminum EN AW-6061

Ø B

Ø A

CDE

Temperature ranges:q FPM, FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-KF

68 Catalog 2010

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


10 FPM 12 10 3,9 8 5 122ZRG010 3,50

16 FPM 17 16 3,9 8 5 122ZRG016 3,40

20 FPM 22 21 3,9 8 5 122ZRG020 6,50

25 FPM 26 25 3,9 8 5 122ZRG025 4,20

32 FPM 34 32 3,9 8 5 122ZRG032 7,10

40 FPM 41 40 3,9 8 5 122ZRG040 5,00

50 FPM 52 50 3,9 8 5,33 122ZRG050 6,60

10 NBR 12 10 3,9 8 5 121ZRG010 3,50

16 NBR 17 16 3,9 8 5 121ZRG016 4,00

20 NBR 22 21 3,9 8 5 121ZRG020 6,50

25 NBR 26 25 3,9 8 5 121ZRG025 5,00

32 NBR 34 32 3,9 8 5 121ZRG032 7,50

40 NBR 41 40 3,9 8 5 121ZRG040 6,50

50 NBR 52 50 3,9 8 5,33 121ZRG050 9,00

10 CR 12 10 3,9 8 5 126ZRG010 3,50

16 CR 17 16 3,9 8 5 126ZRG016 4,00

20 CR 22 21 3,9 8 5 126ZRG020 11,00

25 CR 26 25 3,9 8 5 126ZRG025 5,00

32 CR 34 32 3,9 8 5 126ZRG032 12,00

40 CR 41 40 3,9 8 5 126ZRG040 6,50

50 CR 52 50 3,9 8 5,33 126ZRG050 9,00

10 EPDM 12 10 3,9 8 5 124ZRG010 4,30

16 EPDM 17 16 3,9 8 5 124ZRG016 4,30

20 EPDM 22 21 3,9 8 5 124ZRG020 7,00

25 EPDM 26 25 3,9 8 5 124ZRG025 5,30

32 EPDM 34 32 3,9 8 5 124ZRG032 8,00

40 EPDM 41 40 3,9 8 5 124ZRG040 5,50

50 EPDM 52 50 3,9 8 5,33 124ZRG050 7,50

10 Silikon 12 10 3,9 8 5 123ZRG010 4,30

16 Silikon 17 16 3,9 8 5 123ZRG016 4,30

20 Silikon 22 21 3,9 8 5 123ZRG020 7,00

25 Silikon 26 25 3,9 8 5 123ZRG025 5,30

32 Silikon 34 32 3,9 8 5 123ZRG032 8,00

40 Silikon 41 40 3,9 8 5 123ZRG040 5,75

50 Silikon 52 50 3,9 8 5,33 123ZRG050 7,50

ISO-KF Centering Ring, Stainless Steel 304/1.4301

ISO-KF

Catalog 2010 69

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


10 FPM 12 10 3,9 8 5 172ZRG010 4,00

16 FPM 17 16 3,9 8 5 172ZRG016 4,00

25 FPM 26 25 3,9 8 5 172ZRG025 4,50

40 FPM 41 40 3,9 8 5 172ZRG040 5,50

50 FPM 52 50 3,9 8 5,33 172ZRG050 7,20

10 NBR 12 10 3,9 8 5 171ZRG010 4,00

16 NBR 17 16 3,9 8 5 171ZRG016 4,00

25 NBR 26 25 3,9 8 5 171ZRG025 4,50

40 NBR 41 40 3,9 8 5 171ZRG040 5,50

50 NBR 52 50 3,9 8 5,33 171ZRG050 7,20

10 CR 12 10 3,9 8 5 176ZRG010 4,00

16 CR 17 16 3,9 8 5 176ZRG016 4,00

25 CR 26 25 3,9 8 5 176ZRG025 4,50

40 CR 41 40 3,9 8 5 176ZRG040 5,50

50 CR 52 50 3,9 8 5,33 176ZRG050 7,20

10 EPDM 12 10 3,9 8 5 174ZRG010 4,00

16 EPDM 17 16 3,9 8 5 174ZRG016 4,00

25 EPDM 26 25 3,9 8 5 174ZRG025 4,50

40 EPDM 41 40 3,9 8 5 174ZRG040 5,50

50 EPDM 52 50 3,9 8 5,33 174ZRG050 7,20

10 Silikon 12 10 3,9 8 5 173ZRG010 4,00

16 Silikon 17 16 3,9 8 5 173ZRG016 4,00

25 Silikon 26 25 3,9 8 5 173ZRG025 4,90

40 Silikon 41 40 3,9 8 5 173ZRG040 6,25

50 Silikon 52 50 3,9 8 5,33 173ZRG050 7,50

ISO-KF Centering Ring, Stainless Steel 316L/1.4404

ISO-KF

70 Catalog 2010

Seals


ISO-KF Centering Ring, Plastic

Flange Size [DN]

O-Ring Material A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 FPM 12 10 3,9 8 5 132ZRG010 9,00

16 FPM 17 16 3,9 8 5 132ZRG016 9,00

25 FPM 26 25 3,9 8 5 132ZRG025 10,50

40 FPM 41 40 3,9 8 5 132ZRG040 12,00

50 FPM 52 50 3,9 8 5,33 132ZRG050 15,00

10 NBR 12 10 3,9 8 5 131ZRG010 9,00

16 NBR 17 16 3,9 8 5 131ZRG016 9,00

25 NBR 26 25 3,9 8 5 131ZRG025 10,50

40 NBR 41 40 3,9 8 5 131ZRG040 13,50

50 NBR 41 40 3,9 8 5,33 131ZRG050 15,00

10 CR 12 10 3,9 8 5 136ZRG010 9,00

16 CR 17 16 3,9 8 5 136ZRG016 9,00

25 CR 26 25 3,9 8 5 136ZRG025 10,50

40 CR 41 40 3,9 8 5 136ZRG040 12,00

50 CR 52 50 3,9 8 5,33 136ZRG050 15,00

10 EPDM 12 10 3,9 8 5 134ZRG010 9,00

16 EPDM 17 16 3,9 8 5 134ZRG016 9,00

25 EPDM 26 25 3,9 8 5 134ZRG025 10,50

40 EPDM 41 40 3,9 8 5 134ZRG040 12,00

50 EPDM 52 50 3,9 8 5,33 134ZRG050 18,00

10 Silikon 12 10 3,9 8 5 133ZRG010 10,00

16 Silikon 17 16 3,9 8 5 133ZRG016 10,00

25 Silikon 26 25 3,9 8 5 133ZRG025 11,00

40 Silikon 41 40 3,9 8 5 133ZRG040 12,00

50 Silikon 52 50 3,9 8 5,33 133ZRG050 15,00

PTFE

Ø B

Ø A

CDE


ISO-KF

Catalog 2010 71

Seals



Aluminum EN AW-6061

Stainless Steel 316L/1.4404

ISO-KF Centering Ring without O-Ring

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

10 12 10 3,9 8 120ZRG010 3,60

16 17 16 3,9 8 120ZRG016 3,50

20 22 21 3,9 8 120ZRG020 5,70

25 26 25 3,9 8 120ZRG025 4,40

32 34 32 3,9 8 120ZRG032 6,50

40 41 40 3,9 8 120ZRG040 5,70

50 52 50 3,9 8 120ZRG050 8,10

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

10 12 10 3,9 8 110ZRG010 2,50

16 17 16 3,9 8 110ZRG016 2,30

20 22 21 3,9 8 110ZRG020 5,50

25 26 25 3,9 8 110ZRG025 3,30

32 34 32 3,9 8 110ZRG032 4,50

40 41 40 3,9 8 110ZRG040 3,80

50 52 50 3,9 8 110ZRG050 4,80

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

10 12 10 3,9 8 170ZRG010 4,00

16 17 16 3,9 8 170ZRG016 4,50

25 26 25 3,9 8 170ZRG025 5,40

40 41 40 3,9 8 170ZRG040 6,70

50 52 50 3,9 8 170ZRG050 9,10

Aluminumq Temperature range: -196 to 200 °CStainless SteelTemperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404) Ø B

Ø A

C

D

ISO-KF

72 Catalog 2010

Seals


Flange Size [DN]

Reduced Flange Size

[DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

16 10 FPM 17 12 3,9 8 10 5 112ZRR016 4,00

25 20 FPM 26 22 3,9 8 21 5 112ZRR025 5,30

40 32 FPM 41 34 3,9 8 32 5 112ZRR040 6,80

16 10 NBR 17 12 3,9 8 10 5 111ZRR016 3,20

25 20 NBR 26 22 3,9 8 21 5 111ZRR025 4,60

40 32 NBR 41 34 3,9 8 32 5 111ZRR040 6,00

16 10 CR 17 12 3,9 8 10 5 116ZRR016 3,40

25 20 CR 26 22 3,9 8 21 5 116ZRR025 4,80

40 32 CR 41 34 3,9 8 32 5 116ZRR040 6,20

16 10 EPDM 17 12 3,9 8 10 5 114ZRR016 3,00

25 20 EPDM 26 22 3,9 8 21 5 114ZRR025 4,80

40 32 EPDM 41 34 3,9 8 32 5 114ZRR040 6,20

16 10 Silikon 17 12 3,9 8 10 5 113ZRR016 4,50

25 20 Silikon 26 22 3,9 8 21 5 113ZRR025 5,80

40 32 Silikon 41 34 3,9 8 32 5 113ZRR040 7,80

Flange Size [DN]

Reduced Flange Size

[DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

16 10 FPM 17 12 3,9 8 10 5 122ZRR016 4,60

25 20 FPM 26 22 3,9 8 21 5 122ZRR025 6,30

40 32 FPM 41 34 3,9 8 32 5 122ZRR040 8,20

16 10 NBR 17 12 3,9 8 10 5 121ZRR016 4,50

25 20 NBR 26 22 3,9 8 21 5 121ZRR025 7,00

40 32 NBR 41 34 3,9 8 32 5 121ZRR040 8,50

16 10 CR 17 12 3,9 8 10 5 126ZRR016 4,60

25 20 CR 26 22 3,9 8 21 5 126ZRR025 6,30

40 32 CR 41 34 3,9 8 32 5 126ZRR040 8,20

16 10 EPDM 17 12 3,9 8 10 5 124ZRR016 4,50

25 20 EPDM 26 22 3,9 8 21 5 124ZRR025 7,00

40 32 EPDM 41 34 3,9 8 32 5 124ZRR040 8,50

16 10 Silikon 17 12 3,9 8 10 5 123ZRR016 4,50

25 20 Silikon 26 22 3,9 8 21 5 123ZRR025 7,00

40 32 Silikon 41 34 3,9 8 32 5 123ZRR040 8,50

ISO-KF Reducer Centering Ring

Ø BØ A

C

D

Ø E

F

Aluminum EN AW-6061



ISO-KF

Catalog 2010 73

Seals


ISO-KF Outer Centering Ring

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


16 FPM 32,5 30 3,9 8 5 112ZAR016 5,10

25 FPM 42 40 3,9 8 5 112ZAR025 6,00

40 FPM 57,5 55 3,9 8 5 112ZAR040 7,00

50 FPM 77,5 75 3,9 8 5,33 112ZAR050 13,00

16 NBR 32,5 30 3,9 8 5 111ZAR016 5,00

25 NBR 42 40 3,9 8 5 111ZAR025 6,00

40 NBR 57,5 55 3,9 8 5 111ZAR040 7,00

50 NBR 77,5 75 3,9 8 5,33 111ZAR050 10,50

16 CR 32,5 30 3,9 8 5 116ZAR016 5,10

25 CR 42 40 3,9 8 5 116ZAR025 6,00

40 CR 57,5 55 3,9 8 5 116ZAR040 7,00

50 CR 77,5 75 3,9 8 5,33 116ZAR050 13,00

16 EPDM 32,5 30 3,9 8 5 114ZAR016 5,10

25 EPDM 42 40 3,9 8 5 114ZAR025 6,00

40 EPDM 57,5 55 3,9 8 5 114ZAR040 7,00

50 EPDM 77,5 75 3,9 8 5,33 114ZAR050 10,50

16 Silikon 32,5 30 3,9 8 5 113ZAR016 5,50

25 Silikon 42 40 3,9 8 5 113ZAR025 6,60

40 Silikon 57,5 55 3,9 8 5 113ZAR040 7,75

50 Silikon 77,5 75 3,9 8 5,33 113ZAR050 13,00

Ø A

Ø B

C

D E

Aluminum EN AW-6061

Stainless Steel 304/1.4301Flange Size

[DN]O-Ring

MaterialA

[mm]B

[mm]C

[mm]D

[mm]E

[mm] Item No. Price €

16 FPM 32,5 30 3,9 8 5 122ZAR016 8,00

25 FPM 42 40 3,9 8 5 122ZAR025 9,50

40 FPM 57,5 55 3,9 8 5 122ZAR040 12,00

50 FPM 77,5 75 3,9 8 5,33 122ZAR050 16,00

16 NBR 32,5 30 3,9 8 5 121ZAR016 8,00

25 NBR 42 40 3,9 8 5 121ZAR025 9,50

40 NBR 57,5 55 3,9 8 5 121ZAR040 12,00

50 NBR 77,5 75 3,9 8 5,33 121ZAR050 16,00

16 CR 32,5 30 3,9 8 5 126ZAR016 8,00

25 CR 42 40 3,9 8 5 126ZAR025 9,50

40 CR 57,5 55 3,9 8 5 126ZAR040 12,00

50 CR 77,5 75 3,9 8 5,33 126ZAR050 16,00

Temperature ranges:q FPM, FKM: -15 to 200 °Cq NBR, -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-KF

74 Catalog 2010

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


16 FPM 32,5 30 3,9 8 5 132ZAR016 11,00

25 FPM 42 40 3,9 8 5 132ZAR025 11,50

40 FPM 57,5 55 3,9 8 5 132ZAR040 14,00

50 FPM 77,5 75 3,9 8 5,33 132ZAR050 20,00

16 NBR 32,5 30 3,9 8 5 131ZAR016 6,00

25 NBR 42 40 3,9 8 5 131ZAR025 8,00

40 NBR 57,5 55 3,9 8 5 131ZAR040 10,00

50 NBR 77,5 75 3,9 8 5,33 131ZAR050 16,00

16 CR 32,5 30 3,9 8 5 136ZAR016 10,00

25 CR 42 40 3,9 8 5 136ZAR025 11,50

40 CR 57,5 55 3,9 8 5 136ZAR040 14,00

50 CR 77,5 75 3,9 8 5,33 136ZAR050 20,00

16 EPDM 32,5 30 3,9 8 5 134ZAR016 10,00

25 EPDM 42 40 3,9 8 5 134ZAR025 11,50

40 EPDM 57,5, 55 3,9 8 5 134ZAR040 14,00

50 EPDM 77,5 75 3,9 8 5,33 134ZAR050 20,00

16 Silikon 32,5 30 3,9 8 5 133ZAR016 10,00

25 Silikon 42 40 3,9 8 5 133ZAR025 11,50

40 Silikon 57,5 55 3,9 8 5 133ZAR040 14,00

50 Silikon 77,5 75 3,9 8 5,33 133ZAR050 20,00

ISO-KF Outer Centering Ring, Stainless Steel 304/1.4301

PTFE

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


16 EPDM 32,5 30 3,9 8 5 124ZAR016 8,00

25 EPDM 42 40 3,9 8 5 124ZAR025 9,50

40 EPDM 57,5 55 3,9 8 5 124ZAR040 12,00

50 EPDM 77,5 75 3,9 8 5,33 124ZAR050 16,00

16 Silikon 32,5 30 3,9 8 5 123ZAR016 8,50

25 Silikon 42 40 3,9 8 5 123ZAR025 9,60

40 Silikon 57,5 55 3,9 8 5 123ZAR040 12,00

50 Silikon 77,5 75 3,9 8 5,33 123ZAR050 16,00

ISO-KF

Catalog 2010 75

Seals


ISO-KF Outer Centering Ring with Inner Support Ring

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm] Item No. Price €

16 FPM 32,5 30 3,9 8 16 5 112ZAI016 9,00

25 FPM 42 40 3,9 8 25 5 112ZAI025 10,50

40 FPM 57,5 55 3,9 8 40 5 112ZAI040 11,00

50 FPM 77,5 75 3,9 8 50 5,33 112ZAI050 14,50

16 NBR 32,5 30 3,9 8 16 5 111ZAI016 9,00

25 NBR 42 40 3,9 8 25 5 111ZAI025 10,50

40 NBR 57,5 55 3,9 8 40 5 111ZAI040 11,00

50 NBR 77,5 75 3,9 8 50 5,33 111ZAI050 14,50

16 CR 32,5 30 3,9 8 16 5 116ZAI016 9,00

25 CR 42 40 3,9 8 25 5 116ZAI025 10,50

40 CR 57,5 55 3,9 8 40 5 116ZAI040 11,00

50 CR 77,5 75 3,9 8 50 5,33 116ZAI050 14,50

16 EPDM 32,5 30 3,9 8 16 5 114ZAI016 9,00

25 EPDM 42 40 3,9 8 25 5 114ZAI025 10,50

40 EPDM 57,5 55 3,9 8 40 5 114ZAI040 11,00

50 EPDM 77,5 75 3,9 8 50 5,33 114ZAI050 14,50

16 Silikon 32,5 30 3,9 8 16 5 113ZAI016 9,50

25 Silikon 42 40 3,9 8 25 5 113ZAI025 11,10

40 Silikon 57,5 55 3,9 8 40 5 113ZAI040 11,75

50 Silikon 77,5 75 3,9 8 50 5,33 113ZAI050 15,40

Aluminum EM AW-6061

Ø B

Ø E

C

D

Ø A

F

q Inner ring material: Stainless steelq Temperature range: -15 to 200 °C

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]


16 FPM 32,5 30 3,9 8 16 5 122ZAI016 11,50

25 FPM 42 40 3,9 8 25 5 122ZAI025 13,50

40 FPM 57,5 55 3,9 8 40 5 122ZAI040 17,00

50 FPM 75,5 75 3,9 8 50 5,33 122ZAI050 23,50

16 NBR 32,5 30 3,9 8 16 5 121ZAI016 11,50

25 NBR 42 40 3,9 8 25 5 121ZAI025 13,50

40 NBR 57,5 55 3,9 8 40 5 121ZAI040 17,00

50 NBR 75,5 75 3,9 8 50 5,33 121ZAI050 23,50

16 CR 32,5 30 3,9 8 16 5 126ZAI016 11,50

25 CR 42 40 3,9 8 25 5 126ZAI025 13,50

40 CR 57,5 55 3,9 8 40 5 126ZAI040 17,00

50 CR 75,5 75 3,9 8 50 5,33 126ZAI050 23,50

16 EPDM 32,5 30 3,9 8 16 5 124ZAI016 11,50

25 EPDM 42 40 3,9 8 25 5 124ZAI025 13,50


ISO-KF

76 Catalog 2010

Seals


Aluminum EN AW-6061


ISO-KF Outer Support Ring without Centering Ring

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 29 25 3,8 110ZSA010 3,50

16 32 28 3,8 110ZSA016 4,00

25 42 38 3,8 110ZSA025 5,00

40 56 52 3,8 110ZSA040 6,00

50 70 65 3,8 110ZSA050 7,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 29 25 3,8 120ZSA010 4,50

16 32 28 3,8 120ZSA016 5,00

25 42 38 3,8 120ZSA025 6,00

40 56 52 3,8 120ZSA040 7,00

50 70 65 3,8 120ZSA050 12,00

Ø A

C

Ø B

q For use with elastomer seals

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]


40 EPDM 57,5 55 3,9 8 40 5 124ZAI040 17,00

50 EPDM 75,5 75 3,9 8 50 5,33 124ZAI050 23,50

16 Silikon 32,5 30 3,9 8 16 5 123ZAI016 12,00

25 Silikon 42 40 3,9 8 25 5 123ZAI025 14,10

40 Silikon 57,5 55 3,9 8 40 5 123ZAI040 17,75

50 Silikon 75,5 75 3,9 8 50 5,33 123ZAI050 24,40

ISO-KF Outer Centering Ring with Inner Support Ring, Stainless Steel 304/1.4301

ISO-KF

Catalog 2010 77

Seals


ISO-KF Centering Ring with Screen

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]


10 FPM 12 10 3,9 8 7 5 122ZRD010 12,00

16 FPM 17 16 3,9 8 13 5 122ZRD016 15,00

25 FPM 26 25 3,9 8 19 5 122ZRD025 18,00

40 FPM 41 40 3,9 8 34 5 122ZRD040 20,30

50 FPM 52 50 3,9 8 45 5,33 122ZRD050 30,00

10 NBR 12 10 3,9 8 7 5 121ZRD010 12,00

16 NBR 17 16 3,9 8 13 5 121ZRD016 15,00

25 NBR 26 25 3,9 8 19 5 121ZRD025 18,00

40 NBR 41 40 3,9 8 34 5 121ZRD040 20,30

50 NBR 52 50 3,9 8 45 5,33 121ZRD050 30,00

10 CR 12 10 3,9 8 7 5 126ZRD010 12,00

16 CR 17 16 3,9 8 13 5 126ZRD016 15,00

25 CR 26 25 3,9 8 19 5 126ZRD025 18,00

40 CR 41 40 3,9 8 34 5 126ZRD040 20,30

50 CR 52 50 3,9 8 45 5,33 126ZRD050 30,00

10 EPDM 12 10 3,9 8 7 5 124ZRD010 12,00

16 EPDM 17 16 3,9 8 13 5 124ZRD016 15,00

25 EPDM 26 25 3,9 8 19 5 124ZRD025 18,00

40 EPDM 41 40 3,9 8 34 5 124ZRD040 20,30

50 EPDM 52 50 3,9 8 45 5,33 124ZRD050 30,00

10 Silikon 12 10 3,9 8 7 5 123ZRD010 12,00

16 Silikon 17 16 3,9 8 13 5 123ZRD016 15,00

25 Silikon 26 25 3,9 8 19 5 123ZRD025 18,00

40 Silikon 41 40 3,9 8 34 5 123ZRD040 20,30

50 Silikon 52 50 3,9 8 45 5,33 123ZRD050 30,00


F

Ø B

Ø A

C

Ø E

D

q 30 Mesh: Approximately 0.7 mm (0.028 in)q Wire diameter: Approximately 0.15 mm (0.006 in)


ISO-KF

78 Catalog 2010

Seals


ISO-KF Centering Ring with Sintered Metal Filter

Flange Size [DN]

O-Ring Material A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

10 FPM 12 10 3,9 8 9 5 122ZRS010 15,00

16 FPM 17 12 3,9 8 14 5 122ZRS016 15,00

25 FPM 26 22 3,9 8 24 5 122ZRS025 22,00

40 FPM 41 34 3,9 8 39 5 122ZRS040 32,00

50 FPM 52 50 3,9 8 49 5,33 122ZRS050 40,00

10 NBR 12 10 3,9 8 9 5 121ZRS010 15,00

16 NBR 17 12 3,9 8 14 5 121ZRS016 15,00

25 NBR 26 22 3,9 8 24 5 121ZRS025 18,00

40 NBR 41 34 3,9 8 39 5 121ZRS040 28,00

50 NBR 52 50 3,9 8 49 5,33 121ZRS050 40,00

10 CR 12 10 3,9 8 9 5 126ZRS010 16,00

16 CR 17 12 3,9 8 14 5 126ZRS016 16,00

25 CR 26 22 3,9 8 24 5 126ZRS025 23,00

40 CR 41 34 3,9 8 39 5 126ZRS040 32,00

50 CR 52 50 3,9 8 49 5,33 126ZRS050 40,00

10 EPDM 12 10 3,9 8 9 5 124ZRS010 15,00

16 EPDM 17 12 3,9 8 14 5 124ZRS016 16,00

25 EPDM 26 22 3,9 8 24 5 124ZRS025 21,00

40 EPDM 41 34 3,9 8 39 5 124ZRS040 32,00

50 EPDM 52 50 3,9 8 49 5,33 124ZRS050 40,00

10 Silikon 12 10 3,9 8 9 5 123ZRS010 16,00

16 Silikon 17 12 3,9 8 14 5 123ZRS016 17,00

25 Silikon 26 22 3,9 8 24 5 123ZRS025 22,00

40 Silikon 41 34 3,9 8 39 5 123ZRS040 34,00

50 Silikon 52 50 3,9 8 49 5,33 123ZRS050 40,00


Ø E

Ø A

C

Ø B

D F

q Material: Sintered bronzeq Pore diameter: Approximately 0.02 mm (0.00079 in)

Temperature ranges:q FPM, FKM: -15 to 200 °Cq NBR: -25 to 120°Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-KF

Catalog 2010 79

Seals


NBR

FKM/FPM

ISO-KF O-Ring

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 15 5 101DOR010-S1 0,58

10 15 5 101DOR010-S10 4,50

16 18 5 101DOR016-S1 0,65

16 18 5 101DOR016-S10 5,00

20 25 5 101DOR020-S1 1,05

20 25 5 101DOR020-S10 8,00

25 28 5 101DOR025-S1 0,80

25 28 5 101DOR025-S10 6,00

32 40 5 101DOR032-S1 1,30

32 40 5 101DOR032-S10 10,00

40 42 5 101DOR040-S1 1,05

40 42 5 101DOR040-S10 8,00

50 53,34 5,33 101DOR050-S1 1,30

50 53,34 5,33 101DOR050-S10 10,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 15 5 102DOR010-S1 0,90

10 15 5 102DOR010-S10 7,00

16 18 5 102DOR016-S1 1,50

16 18 5 102DOR016-S10 11,50

20 25 5 102DOR020-S1 1,70

20 25 5 102DOR020-S10 13,00

25 28 5 102DOR025-S1 1,65

25 28 5 102DOR025-S10 12,60

32 40 5 102DOR032-S1 2,20

32 40 5 102DOR032-S10 17,00

40 42 5 102DOR040-S1 1,80

40 42 5 102DOR040-S10 14,00

50 53,34 5,33 102DOR050-S1 2,20

50 53,34 5,33 102DOR050-S10 17,00

-S1: 1 piece/-S10: 10 pieces


Ø A

B

Temperature range:q FPM/FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-KF

80 Catalog 2010

Seals


EPDM

CR

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 15 5 104DOR010-S1 2,35

10 15 5 104DOR010-S10 18,00

16 18 5 104DOR016-S1 2,60

16 18 5 104DOR016-S10 20,00

25 28 5 104DOR025-S1 3,00

25 28 5 104DOR025-S10 23,00

40 42 5 104DOR040-S1 3,80

40 42 5 104DOR040-S10 29,00

50 53,34 5,33 104DOR050-S1 4,70

50 53,34 5,33 104DOR050-S10 36,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 15 5 106DOR010-S1 1,80

10 15 5 106DOR010-S10 18,00

16 18 5 106DOR016-S1 2,00

16 18 5 106DOR016-S10 20,00

25 28 5 106DOR025-S1 2,30

25 28 5 106DOR025-S10 23,00

40 42 5 106DOR040-S1 2,90

40 42 5 106DOR040-S10 29,00

50 53,34 5,33 106DOR050-S1 3,60

50 53,34 5,33 106DOR050-S10 36,00



ISO-KF O-Ring, Silicone (VMQ)Flange Size

[DN]A

[mm]B

[mm]Item No. Price €

10 15 5 103DOR010-S1 2,35

10 15 5 103DOR010-S10 18,00

16 18 5 103DOR016-S1 3,00

16 18 5 103DOR016-S10 23,00

25 28 5 103DOR025-S1 3,25

25 28 5 103DOR025-S10 25,00

40 42 5 103DOR040-S1 3,50

40 42 5 103DOR040-S10 27,00

50 53,34 5,33 103DOR050-S1 4,50

50 53,34 5,33 103DOR050-S10 34,00


ISO-KF

Catalog 2010 81

Seals


Aluminum EN AW-6082/3.2315, Soft-annealed

ISO-KF Helicoflex Seal

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 / 16 30,1 22,0 4,8 9 17,2 110ZRM016 60,00

20 / 25 40,1 32,2 4,8 9 27,4 110ZRM025 65,00

32 / 40 55,1 47,7 4,8 9 42,9 110ZRM040 70,00

50 75,1 62,2 4,8 9 57,4 110ZRM050 75,00

Ø E

Ø B

Ø A

D

C

ISO-KF Aluminum Edged Seal

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 / 16 30 21 4,5 7 18,5 110ZSK016 6,50

20 / 25 40 31 4,5 7 28,5 110ZSK025 7,50

32 / 40 55 46 4,5 7 43,5 110ZSK040 8,50

50 75 66 4,5 7 63,5 110ZSK050 11,00

Ø B

Ø AD

Ø E

C

q For stainless steel flangesq Temperature: up to 280 °Cq No gas permeationq Aluminum mantledq Centering ring: Inconel 600q Spring: Nimonic 90 or Inconelq Spacing material: Stainless steelq Fastener: ISO-KF Clamp for Metal Sealsq For single use only

q For stainless steel flangesq Temperature range: -196 to 150 °Cq No gas permeationq Fastener: ISO-KF Clamp for Metal Sealsq For single use only

ISO-KF

82 Catalog 2010

Seals


Ultra-seal, EN AW-6061 aluminum, package of 3

Outer support Ring for Ultra-seal, 304/1.4301 Stainless Steel

ISO-KF Metal Seal

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

10 / 16 25,6 22,6 4,5 19,6 110DSS016 21,00

20 / 25 35,6 32,6 4,5 29,6 110DSS025 24,00

32 / 40 50,6 47,6 4,5 44,6 110DSS040 26,00

50 65,6 62,6 4,5 59,6 110DSS050 48,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 / 16 32 7 25 120ZSS016 13,00

20 / 25 42 7 35 120ZSS025 15,00

32 / 40 57 7 50 120ZSS040 18,00

50 77 7 65 120ZSS050 24,00

C

Ø A

Ø D

Ø B

Ø A

B ØC

q For stainless steel flangesq Temperature range: -196 to 150 °Cq No gas permeationq Fastener: ISO-KF Clamp for Metal Sealsq Install with outer support ring for ultra-sealq For single use only

q Reusable

ISO-KF

Catalog 2010 83

Components





ISO-KF Blank Flange

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 30 12,2 5 3 - 110FBL010 3,20

16 30 17,2 5 3 - 110FBL016 3,20

25 40 26,2 5 3 3,5 110FBL025 3,60

40 55 41,2 5 3 5 110FBL040 5,50

50 75 52,4 5 3 5 110FBL050 9,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 30 12,2 5 3 - 120FBL010 4,70

16 30 17,2 5 3 - 120FBL016 4,70

20 40 22,2 5 3 3,5 120FBL020 5,50

25 40 26,2 5 3 3,5 120FBL025 5,50

32 55 34,2 5 3 5 120FBL032 7,00

40 55 41,2 5 3 5 120FBL040 7,00

50 75 52,4 5 3 5 120FBL050 11,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 30 12,2 5 3 - 170FBL010 5,00

16 30 17,2 5 3 - 170FBL016 5,00

25 40 26,2 5 3 3,5 170FBL025 5,50

40 55 41,2 5 3 5 170FBL040 7,00

50 75 52,4 5 3 5 170FBL050 10,00

D

Ø B

Ø A

C

E

Aluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 200 °C*Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Brassq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 100 °C*Plasticq Pressure range: 1.5 bar to 10-5 mbar*q Temperature range: -20 to 80 °C**Please observe limits for seal materials and fastening elements

ISO-KF

84 Catalog 2010

Components


Plastic (POM)

ISO-KF Blank Flange, Brass 2.0401/CuZn 39Pb3

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 / 16 30 17,2 5 3 - 130FBL016 4,70

20 / 25 40 26,2 5 3 3,5 130FBL025 5,50

32 / 40 55 41,2 5 3 5 130FBL040 7,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 / 16 30 17,2 5 3 - 140FBL016 5,50

20 / 25 40 26,2 5 3 3,5 140FBL025 6,00

32 / 40 55 41,2 5 3 5 140FBL040 8,50

50 75 52,4 5 3 5 140FBL050 12,00

q Fastener: Chain clamp BSKq Pressure range: 1.5 to 10-7 mbar (elastomer seal)*q Pressure range: 1.5 to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements


ISO-KF Large Flange, Blank Flange

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 87 70 5 3 120FBL063 20,00

80 114 83 12 8,3 120FBL080 25,00

100 134 102 12 8,3 120FBL100 30,00

160 190 153 12 8,3 120FBL160 50,00

D

Ø A

Ø B

C

ISO-KF

Catalog 2010 85

Components


ISO-KF Glass Blank Flange

Borosilicate Ø A

B

Flange Size [ISO-KF]

A [mm]

B [mm]

Item No. Price €

16 30 5 160FBL016 30,00

25 40 5 160FBL025 34,00

40 55 5 160FBL040 38,00

50 75 5 160FBL050 50,00

QuartzFlange Size

[ISO-KF]A

[mm]B


16 30 5 180FBL016 80,00

25 40 5 180FBL025 140,00

40 55 5 180FBL040 220,00

50 75 5 180FBL050 245,00

q Assembly with outer centering ring and elastomer sealq Connecting clamps: Plastic chain clamps and clamping rings (urgently avoid metal/glass contacts)q Pressure range: 10-7 to 1000 mbarq Temperature range: - Borosilicate: 5 to 302°F (-15 to 150°C), - Quartz: 5 to 200°F (-15 to 200°C)*with respect to temperature ranges of gasket and clamp materials

ISO-KF

86 Catalog 2010

Components




ISO-KF Weld Ring Flange

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

10 12,7 x 1,24 0.50“ 30 12,2 10,2 12,8 5 3 120FAN010-12 8,00

10 14 x 2 - 30 12,2 10 14,15 5 3 120FAN010-14 6,00

16 19,05 x 1,65 0.75“ 30 17,2 15,75 19,2 5 3 120FAN016-19 8,00

16 20 x 2 - 30 17,2 16 20,2 5 3 120FAN016-20 6,00

25 25,4 x 1,65 1.00“ 40 26,2 22,1 25,6 5 3 120FAN025-25 10,00

25 28 x 2 - 40 26,2 24 28,2 5 3 120FAN025-28 8,00

40 38 x 1,5 1.50“ 55 41,2 35 38,2 5 3 120FAN040-38 12,50

40 44,5 x 2 1.75“ 55 41,2 40,5 44,7 5 3 120FAN040-44 10,50

50 50,8 x 1,65 2.00“ 75 52,4 47,5 51,0 5 3 120FAN050-51 16,50

50 53 x 1,5 - 75 52,4 50 53,2 5 3 120FAN050-53 14,50

50 57 x 3,2 - 75 52,4 50,6 57,2 5 3 120FAN050-57 14,50F

Ø C

E

Ø D

Ø A

Ø B

F

Ø C

E

Ø D

Ø A

Ø B

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

10 14 x 2 - 30 12,2 10 14,15 5 3 170FAN010-14 6,50

16 20 x 2 - 30 17,2 16 20,2 5 3 170FAN016-20 6,50

25 28 x 2 - 40 26,2 24 28,2 5 3 170FAN025-28 8,50

40 44,5 x 2 1.75“ 55 41,2 40,5 44,7 5 3 170FAN040-44 11,00

50 57 x 3,2 - 75 52,4 50,6 57,2 5 3 170FAN050-57 15,00

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

63 63,5 x 1,65 2.50“ 87 70 60,2 63,7 5 3 120FAN063-63 20,00

80 76,1 x 2 3.00“ 114 83 72,1 76,4 12 8,3 120FAN080-76 25,00

100 101,6 x 2,1 4.00“ 134 102 97,4 101,8 12 8,3 120FAN100-101 28,00

160 152,4 x 2,4 6.00“ 190 153 147,6 152,7 12 8,3 120FAN160-152 50,00

q Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements


ISO-KF Large Weld Ring Flange q Fastener: Chain clamp BSK

ISO-KF

Catalog 2010 87

Components



ISO-KF Half Nipple

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 14 x 2 - 26 14 2 30 12,2 120FRA010-14-26 8,00

10 14 x 2 - 30 14 2 30 12,2 120FRA010-14-30 9,00

10 14 x 2 - 52 14 2 30 12,2 120FRA010-14-52 10,50

10 14 x 2 - 70 14 2 30 12,2 120FRA010-14-70 13,50

16 19,05 x 1,65 0.75“ 13 19,05 1,65 30 17,2 120FRA016-19-13 10,00

16 19 ,05 x 1,65 0.75“ 40 19,05 1,65 30 17,2 120FRA016-19-40 12,50

16 20 x 2 - 26 20 2 30 17,2 120FRA016-20-26 8,00

16 20 x 2 - 30 20 2 30 17,2 120FRA016-20-30 9,00

16 20 x 2 - 40 20 2 30 17,2 120FRA016-20-40 9,50

16 20 x 2 - 52 20 2 30 17,2 120FRA016-20-52 10,50

16 20 x 2 - 70 20 2 30 17,2 120FRA016-20-70 13,50

16 6,35 x 1,18 0.25“ 23,5 6,35 1,18 30 17,2 120FRA016-6-23 13,50

16 6,35 x 1,18 0.25“ 30 6,35 1,18 30 17,2 120FRA016-6-30 14,00

20 24 x 2 - 26 24 2 40 22,2 120FRA020-24-26 13,00

25 25,4 x 1,65 1.00“ 13 25,4 1,65 40 26,2 120FRA025-25-13 12,00

25 25,4 x 1,65 1.00“ 40 25,4 1,65 40 26,2 120FRA025-25-40 15,50

25 28 x 2 - 26 28 2 40 26,2 120FRA025-28-26 10,00

25 28 x 2 - 30 28 2 40 26,2 120FRA025-28-30 11,50

25 28 x 2 - 40 28 2 40 26,2 120FRA025-28-40 12,50

25 28 x 2 - 55 28 2 40 26,2 120FRA025-28-55 13,50

25 28 x 2 - 70 28 2 40 26,2 120FRA025-28-70 16,50

32 38 x 2 1.50“ 26 38 2 55 34,2 120FRA032-38-26 17,00

40 38 x 1,5 1.50“ 19 38 1,5 55 41,2 120FRA040-38-19 14,00

40 38 x 1,5 1.50“ 40 38 1,5 55 41,2 120FRA040-38-40 18,00

40 42,4 x 2 - 26 42,4 2 55 41,2 120FRA040-42-26 16,90

40 44,5 x 2 1.75“ 26 44,5 2 55 41,2 120FRA040-44-26 12,00

40 44,5 x 2 1.75“ 30 44,5 2 55 41,2 120FRA040-44-30 14,00

40 44,5 x 2 1.75“ 32,5 44,5 2 55 41,2 120FRA040-44-32 14,00

40 44,5 x 2 1.75“ 34 44,5 2 55 41,2 120FRA040-44-34 14,00

40 44,5 x 2 1.75“ 40 44,5 2 55 41,2 120FRA040-44-40 14,00

40 44,5 x 2 1.75“ 58 44,5 2 55 41,2 120FRA040-44-58 16,00

40 44,5 x 2 1.75“ 70 44,5 2 55 41,2 120FRA040-44-70 20,00

A

C

ØB

ØD

ØE

q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*q Steel Temperature range: 0 to 150 °C*q Brass Temperature range: -196 to 100 °C*q Plastic Temperature range: -20 to 80 °C*q Custom lengths available on short notice*Please observe limits for seal materials and fastening elements

ISO-KF

88 Catalog 2010

Components



ISO-KF Half Nipple Stainless Steel 304/1.4301

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 14 x 2 - 30 14 2 30 12,2 170FRA010-14-30 9,50

10 14 x 2 - 52 14 2 30 12,2 170FRA010-14-52 11,00

16 18 x 1 - 26 18 1 30 17,2 170FRA016-18-26 8,50

16 19,05 x 1,65 0.75“ 40 19,05 1,65 30 17,2 170FRA016-19-40 9,50

16 20 x 2 - 26 20 2 30 17,2 170FRA016-20-26 8,50

16 20 x 2 - 30 20 2 30 17,2 170FRA016-20-30 9,50

16 20 x 2 - 40 20 2 30 17,2 170FRA016-20-40 10,00

16 20 x 2 - 52 20 2 30 17,2 170FRA016-20-52 11,00

16 20 x 2 - 70 20 2 30 17,2 170FRA016-20-70 21,00

25 28 x 2 - 26 28 2 40 26,2 170FRA025-28-26 10,50

25 28 x 2 - 30 28 2 40 26,2 170FRA025-28-30 12,00

25 28 x 2 - 40 28 2 40 26,2 170FRA025-28-40 12,50

25 28 x 2 - 55 28 2 40 26,2 170FRA025-28-55 14,00

25 28 x 2 - 70 28 2 40 26,2 170FRA025-28-70 19,00

25 28 x 1,5 - 26 28 1,5 40 26,2 170FRA025-28x1.5-26 10,50

25 28 x 1,5 - 55 28 1,5 40 26,2 170FRA025-28x1.5-55 14,00

25 30 x 2 - 40 30 2 40 26,2 170FRA025-30-40 11,00

40 42,4 x 2 - 26 42,4 2 55 41,2 170FRA040-42-26 15,00

40 44,5 x 2 1.75“ 26 44,5 2 55 41,2 170FRA040-44-26 12,50

40 44,5 x 2 1.75“ 30 44,5 2 55 41,2 170FRA040-44-30 14,50

40 44,5 x 2 1.75“ 40 44,5 2 55 41,2 170FRA040-44-40 14,50

40 44,5 x 2 1.75“ 58 44,5 2 55 41,2 170FRA040-44-58 16,50

40 44,5 x 2 1.75“ 70 44,5 2 55 41,2 170FRA040-44-70 21,00

50 50,8 x 1,65 2.00“ 40 50,8 1,65 75 52,4 170FRA050-50-40 20,50

50 53 x 1,5 - 26 53 1,5 75 52,4 170FRA050-53-26 20,50

50 54 x 2 - 26 54 2 75 52,4 170FRA050-54-26 20,50

50 54 x 2 - 52 54 2 75 52,4 170FRA050-54-52 26,50

50 57 x 3,2 - 26 57 3,2 75 52,4 170FRA050-57-26 21,50

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

50 50,8 x 1,65 2.00“ 19 50,8 1,65 75 52,4 120FRA050-50-19 22,00

50 50,8 x 1,65 2.00“ 40 50,8 1,65 75 52,4 120FRA050-50-40 28,00

50 53 x 1,5 - 40 53 1,5 75 52,4 120FRA050-53-40 21,00

50 54 x 2 - 26 54 2 75 52,4 120FRA050-54-26 19,50

50 54 x 2 - 52 54 2 75 52,4 120FRA050-54-52 24,50

50 57 x 3,2 - 26 57 3,2 75 52,4 120FRA050-57-26 20,00

50 57 x 3,2 - 30 57 3,2 75 52,4 120FRA050-57-30 23,00

50 57 x 3,2 - 40 57 3,2 75 52,4 120FRA050-57-40 24,00

50 57 x 3,2 - 58 57 3,2 75 52,4 120FRA050-57-58 26,00

50 57 x 3,2 - 70 57 3,2 75 52,4 120FRA050-57-70 30,00

ISO-KF

Catalog 2010 89

Components


Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 14 x 2 - 16 14 2 30 12,2 140FRA010-14-26 8,00

10 14 x 2 - 52 14 2 30 12,2 140FRA010-14-52 12,00

16 20 x 2 - 16 20 2 30 17,2 140FRA016-20-26 7,00

16 20 x 2 - 52 20 2 30 17,2 140FRA016-20-52 12,00

20 25 x 2,5 - 20 25 2,5 40 22,2 140FRA020-24-26 11,00

20 25 x 2,5 - 55 25 2,5 40 22,2 140FRA020-24-55 21,00

25 29 x 2 - 20 29 2 40 26,2 140FRA025-28-20 13,00

25 29 x 2 - 55 29 2 40 26,2 140FRA025-28-55 23,00

32 38 x 3 1.50“ 25 38 3 55 34,2 140FRA032-38-26 21,00

32 38 x 3 1.50“ 58 38 3 55 34,2 140FRA032-38-58 29,00

40 45 x 2,5 - 25 45 2.5 55 41,2 140FRA040-44-25 22,00

40 45 x 2,5 - 58 45 2,5 55 41,2 140FRA040-44-58 32,00

50 55 x 2,5 - 25 55 2,5 75 52,4 140FRA050-57-26 25,00

50 55 x 2,5 - 58 55 2,5 75 52,4 140FRA050-57-58 40,00

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

10 14 x 2 - 26 14 2 30 12,2 150FRA010-14-26 7,00

10 14 x 2 - 30 14 2 30 12,2 150FRA010-14-30 7,50

10 14 x 2 - 52 14 2 30 12,2 150FRA010-14-52 9,00

16 20 x 2 - 26 20 2 30 17,2 150FRA016-20-26 7,00

16 20 x 2 - 52 20 2 30 17,2 150FRA016-20-52 9,00

25 28 x 2 - 26 28 2 40 26,2 150FRA025-28-26 9,50

25 28 x 2 - 55 28 2 40 26,2 150FRA025-28-55 12,00

40 44,5 x 2 1.75“ 26 44,5 2 55 41,2 150FRA040-44-26 11,00

40 44,5 x 2 1.75“ 58 44,5 2 55 41,2 150FRA040-44-58 15,00

50 57 x 3,2 - 26 57 3,2 75 52,4 150FRA050-57-26 21,00

50 57 x 3,2 - 58 57 3,2 75 52,4 150FRA050-57-58 28,00

Brass 2.0401/CuZn39Pb3

Steel S235JR/1.0038

ISO-KF Half Nipple, Stainless Steel 316L/1.4404Flange Size

[DN]Tube Ø

[mm]OD x wall

[mm]A

[mm]B

[mm]C

[mm]D

[mm]E


50 57 x 3,2 - 30 57 3,2 75 52,4 170FRA050-57-30 23,50

50 57 x 3,2 - 58 57 3,2 75 52,4 170FRA050-57-58 26,50

50 57 x 3,2 - 70 57 3,2 75 52,4 170FRA050-57-70 36,00

ISO-KF

90 Catalog 2010

Components




ISO-KF Full Nipple

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 60 10 110RZS010 20,00

16 80 16 110RZS016 21,00

25 100 24 110RZS025 29,00

40 130 40 110RZS040 35,00

50 140 50 110RZS050 60,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 60 10 120RZS010 25,00

16 80 16 120RZS016 25,00

25 100 24 120RZS025 28,00

40 130 40 120RZS040 33,00

50 140 50 120RZS050 43,00

A

ØB

A

ØB

Aluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 150 °C*Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

q Custom lengths available on short notice

Aluminum EN AW-2007/3.1645Flange Size

[DN]A

[mm]B


16 80 16 110RZS016-V 22,00

25 100 24 110RZS025-V 30,00

40 130 40 110RZS040-V 36,00

A

ØB

ISO-KF

Catalog 2010 91

Components




ISO-KF Elbow, 90°

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 30 10 120RRB010-90 36,00

16 40 16 120RRB016-90 36,00

25 50 24 120RRB025-90 30,00

40 65 40 120RRB040-90 45,00

50 70 51 120RRB050-90 58,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 40 16 170RRB016-90 52,00

25 50 24 170RRB025-90 38,00

40 65 40 170RRB040-90 46,00

50 70 51 170RRB050-90 85,00

A

A

Ø B


ISO-KF Full Nipple, Stainless Steel 316L/1.4404

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 60 10 170RZS010 70,00

16 80 16 170RZS016 70,00

25 100 24 170RZS025 75,00

40 130 40 170RZS040 80,00

50 140 50 170RZS050 90,00

ISO-KF

92 Catalog 2010

Components




ISO-KF Elbow, Radius, 45°

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 30 10 120RRB010-45 45,00

16 25 16 120RRB016-45 45,00

25 32 24 120RRB025-45 48,00

40 40 40 120RRB040-45 55,00

50 51 51 120RRB050-45 68,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 26 16 170RRB016-45 58,00

25 32 24 170RRB025-45 65,00

40 40 40 170RRB040-45 65,00

50 51 51 170RRB050-45 78,00

A

A

Ø B



ISO-KF Elbow, 90°

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 30 12 110RRB010-90 21,00

16 40 16 110RRB016-90 21,00

25 50 25 110RRB025-90 24,00

40 65 39 110RRB040-90 29,00

A

AØ B

Aluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 150 °C*Plasticq Pressure range: 1.5 bar to 10-5 mbar (elastomer seal)*q Temperature range: -20 to 80 °C*Please observe limits for seal materials and fastening elements

DN 16/25: When fastening with claw clamps, use only short version (110BPR050).

ISO-KF

Catalog 2010 93

Components


ISO-KF Reducer Elbow

Flange Size [DN]

reduced Flange Size

[ISO-KF]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

25 16 62 22 40 25 16 110RWR025-016-V 38,00

40 16 72 30 50 40 16 110RWR040-016-V 50,00

40 25 80 30 50 40 25 110RWR040-025-V 50,00

BC

AØ D

ØE

q Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 150 °C**Please observe limits for seal materials and fastening elements


Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 57,5 20 40 16 130RWS016 20,00

25 72,5 25 50 24 130RWS025 24,00

40 95 35 65 40 130RWS040 45,00

Plastic (POM)

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

10 58 20 40 10 110RWS010-V 20,00

16 58 20 40 16 110RWS016-V 22,00

25 73 25 50 25 110RWS025-V 28,00

40 95 35 65 40 110RWS040-V 40,00

50 120 50 80 50 110RWS050-V 78,00

C

AØ D

BØ

D

C

AØ D

BØ

D

ISO-KF Winkelstück, 90°, Aluminum EN AW-2007/3.1645

ISO-KF

94 Catalog 2010

Components



[DN]A

[mm]B

[mm]C


10 60 30 10 120RTS010 50,00

16 80 40 16 120RTS016 50,00

25 100 50 24 120RTS025 40,00

40 130 65 40 120RTS040 70,00

50 140 70 51 120RTS050 80,00


ISO-KF Tee

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 60 30 10 110RTS010 25,00

16 80 40 16 110RTS016 20,00

25 100 50 24 110RTS025 30,00

40 130 65 40 110RTS040 34,00

B

AØ C

ØC

Aluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 150 °C*Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Plasticq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Temperature range: -20 to 80 °C*Please observe limits for seal materials and fastening elements


[DN]A

[mm]B

[mm]C


10 40 20 10 110RTS010-V 20,00

16 40 20 16 110RTS016-V 24,00

25 50 25 25 110RTS025-V 34,00

40 65 35 40 110RTS040-V 42,00

50 80 50 50 110RTS050-V 80,00

A

Ø C

ØC

B

Ø CA

ØC

B

ISO-KF

Catalog 2010 95

Components


A

Ø C

ØC

B


[DN]Reduced

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

25 10 43 40 62,5 24 10 110RTR025-010-V 40,00

25 16 44 40 62,5 25 16 110RTR025-016-V 40,00

40 10 59 50 80 40 10 110RTR040-010-V 55,00

40 16 59 50 80 40 16 110RTR040-016-V 55,00

40 25 59 50 80 40 25 110RTR040-025-V 55,00

50 10 79 70 110 50 10 110RTR050-010-V 90,00

B

AØ E

C

ØD

ISO-KF Reducer TeeAluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 150 °C*Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

ISO-KF Tee, Stainless Steel 316L/1.4404Flange Size

[DN]A

[mm]B

[mm]C


16 80 40 16 170RTS016 50,00

25 100 50 24 170RTS025 60,00

40 130 65 40 170RTS040 80,00

50 140 70 50 170RTS050 130,00

Plastic (POM)Flange Size

[DN]A

[mm]B

[mm]C


16 40 40 16 130RTS016 23,00

25 50 50 24 130RTS025 27,00

40 70 65 40 130RTS040 40,00

ISO-KF

96 Catalog 2010

Components


ISO-KF Reducer Tee, Stainless Steel 304/1.4301


ISO-KF 4-Way Cross

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 60 30 10 110RKS010 26,00

16 80 40 16 110RKS016 26,00

25 100 50 24 110RKS025 30,00

40 130 65 40 110RKS040 45,00



Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 80 20 10 110RKS010-V 30,00

16 80 20 16 110RKS016-V 30,00

25 100 25 24 110RKS025-V 38,00

40 130 35 40 110RKS040-V 63,00

B

A

ØC

Ø C

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

25 16 100 40 24 16 120RTR025-016 62,00

40 16 130 40 40 16 120RTR040-016 70,00

40 25 130 50 40 24 120RTR040-025 75,00

50 16 140 50 50 16 120RTR050-016 85,00

50 25 140 65 50 24 120RTR050-025 90,00

50 40 140 65 50 40 120RTR050-040 95,00

A

B

ØC

Ø D

AB

ØC

ISO-KF

Catalog 2010 97

Components


BA

ØC

Ø C


[DN]A

[mm]B

[mm]C


16 80 20 16 130RKS016 28,00

25 100 24 25 130RKS025 35,00

40 130 35 40 130RKS040 68,00

Stainless Steel 316L/1.4404Flange Size

[DN]A

[mm]B

[mm]C


10 60 30 10 170RKS010 75,00

16 80 40 16 170RKS016 55,00

25 100 50 24 170RKS025 80,00

40 130 65 40 170RKS040 110,00

50 140 70 51 170RKS050 185,00

ISO-KF 4-Way Cross, Stainless Steel 304/1.4301

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 60 30 10 120RKS010 64,00

16 80 40 16 120RKS016 64,00

25 100 50 24 120RKS025 52,00

40 130 65 40 120RKS040 80,00

50 140 70 51 120RKS050 100,00

A

B

ØC

ISO-KF

98 Catalog 2010

Components


ISO-KF Reducer Cross


[DN]Reduced

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

25 16 100 40 24 16 120RKR025-016 100,00

40 16 130 40 40 16 120RKR040-016 125,00

40 25 130 50 40 24 120RKR040-025 135,00

50 16 140 40 50 16 120RKR050-016 150,00

50 25 140 50 50 24 120RKR050-025 155,00

50 40 140 65 50 40 120RKR050-040 165,00

A

ØC

Ø D

B

Aluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 150 °C*Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elementsq Other combinations and custom lengths available on short notice


ISO-KF 6-Way Cross

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 130 65 16 120RKD016 120,00

25 130 65 24 120RKD025 140,00

40 130 65 40 120RKD040 190,00

A

B

ØCq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*

q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements


[DN]Reduced

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

25 10 80 22 10 24 110RKR025-010-V 52,00

25 16 80 22 16 25 110RKR025-016-V 53,00

40 10 100 30 10 40 110RKR040-010-V 74,00

40 16 100 30 16 40 110RKR040-016-V 75,00

40 25 100 30 24 40 110RKR040-025-V 76,00

B

AØ DØ

C

ISO-KF

Catalog 2010 99

Components




ISO-KF Straight Reducer

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

25 10 30 10 110RRG025-010-30 18,00

25 16 28 16 110RRG025-016-28 18,00

25 16 30 16 110RRG025-016-30 18,00

25 16 40 16 110RRG025-016-40 18,00

40 10 28 10 110RRG040-010-28 20,00

40 10 30 10 110RRG040-010-30 20,00

40 16 28 16 110RRG040-016-28 20,00

40 16 30 16 110RRG040-016-30 20,00

40 16 40 16 110RRG040-016-40 21,00

40 25 28 24 110RRG040-025-28 20,00

40 25 30 25 110RRG040-025-30 20,00

40 25 40 24 110RRG040-025-40 21,00

50 16 30 16 110RRG050-016-30 25,00

50 25 28 24 110RRG050-025-28 25,00

50 25 30 25 110RRG050-025-30 25,00

50 25 40 24 110RRG050-025-40 26,00

50 40 28 40 110RRG050-040-28 25,00

50 40 30 40 110RRG050-040-30 25,00

50 40 40 40 110RRG050-040-40 26,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

25 10 28 10 120RRG025-010-28 19,00

25 10 40 10 120RRG025-010-40 20,00

25 16 28 16 120RRG025-016-28 19,00

25 16 40 16 120RRG025-016-40 20,00

40 10 28 10 120RRG040-010-28 25,00

40 10 40 10 120RRG040-010-40 26,00

40 16 28 16 120RRG040-016-28 19,00

40 16 40 16 120RRG040-016-40 27,00

A

ØB


ISO-KF

100 Catalog 2010

Components


ISO-KF Straight Reducer, Stainless Steel 304/1.4301


Plastic (POM)

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

25 16 28 16 170RRG025-016-28 22,00

40 16 28 16 170RRG040-016-28 26,00

40 25 28 24 170RRG040-025-28 30,00

50 25 28 24 170RRG050-025-28 40,00

50 40 28 40 170RRG050-040-28 42,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

25 16 30 16 130RRG025-016-30 22,00

40 16 30 16 130RRG040-016-30 25,00

40 25 30 25 130RRG040-025-30 25,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

40 25 28 24 120RRG040-025-28 27,00

40 25 40 24 120RRG040-025-40 28,00

50 16 28 16 120RRG050-016-28 28,00

50 16 40 16 120RRG050-016-40 29,00

50 25 28 24 120RRG050-025-28 29,00

50 25 40 24 120RRG050-025-40 30,00

50 40 28 40 120RRG050-040-28 30,00

50 40 40 40 120RRG050-040-40 31,00

ISO-KF

Catalog 2010 101

Components




ISO-KF Conical Reducer

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

25 16 40 16 24 120RRK025-016-40 20,00

40 16 40 16 40 120RRK040-016-40 22,00

40 25 40 24 40 120RRK040-025-40 24,00

50 16 40 16 50 120RRK050-016-40 28,00

50 25 40 24 50 120RRK050-025-40 29,00

50 40 40 40 50 120RRK050-040-40 30,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

25 16 28 16 24 170RRK025-016-28 23,00

40 16 28 16 40 170RRK040-016-28 26,00

40 25 28 24 40 170RRK040-025-28 26,00

50 25 28 24 50 170RRK050-025-28 37,00

50 40 28 40 50 170RRK050-040-28 43,00

50 40 40 40 50 170RRK050-040-40 45,00

A

ØB

ØCq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*

q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

q Other flange sizes and dimensions available on requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements


ISO-K/KF Straight Adapter

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

63 16 50 16 320RRG063-016-50 55,00

63 25 50 24 320RRG063-025-50 56,00

63 40 40 40,5 320RRG063-040-40 58,00

63 40 50 40,5 320RRG063-040-50 58,00

63 50 50 50 320RRG063-050-50 69,00

A

ØB

ISO-KF

102 Catalog 2010

Components


Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

63 16 50 16 370RRG063-016-50 78,00

63 25 50 24 370RRG063-025-50 83,00

63 40 40 40,5 370RRG063-040-40 86,00

63 40 50 40,5 370RRG063-040-50 96,00

63 50 50 50 370RRG063-050-50 102,00

80 25 50 24 370RRG080-025-50 94,00

80 40 50 40,5 370RRG080-040-50 102,00

80 50 50 50 370RRG080-050-50 118,00

100 25 50 24 370RRG100-025-50 115,00

100 40 38,5 40,5 370RRG100-040-38 120,00

100 40 50 40,5 370RRG100-040-50 120,00

100 50 50 50 370RRG100-050-50 125,00

160 40 50 40,5 370RRG160-040-50 145,00

160 50 50 50 370RRG160-050-50 155,00

200 40 50 40,5 370RRG200-040-50 400,00

200 50 50 50 370RRG200-050-50 435,00

250 40 50 40,5 370RRG250-040-50 510,00

250 50 50 50 370RRG250-050-50 540,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

80 25 50 24 320RRG080-025-50 65,00

80 40 50 40,5 320RRG080-040-50 70,00

80 50 50 50 320RRG080-050-50 82,00

100 25 50 24 320RRG100-025-50 65,00

100 40 50 40,5 320RRG100-040-50 70,00

100 50 50 50 320RRG100-050-50 82,00

160 40 50 40,5 320RRG160-040-50 100,00

160 50 50 50 320RRG160-050-50 110,00

200 40 50 40,5 320RRG200-040-50 295,00

200 50 50 50 320RRG200-050-50 315,00

250 40 50 40,5 320RRG250-040-50 355,00

250 50 50 50 320RRG250-050-50 375,00


ISO-K/KF Straight Adapter, Stainless Steel 304/1.4301

ISO-KF

Catalog 2010 103

Components




ISO-K/KF Conical Adapter

ISO-K Flange Size

[DN]

KF Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 25 63 24 70 320RRK063-025-63 96,00

63 40 63 40 70 320RRK063-040-63 96,00

63 50 63 50 70 320RRK063-050-63 105,00

80 40 63 40 83 320RRK080-040-63 105,00

80 50 63 50 83 320RRK080-050-63 115,00

100 40 63 40 102 320RRK100-040-63 105,00

100 50 63 50 102 320RRK100-050-63 115,00

ISO-K Flange Size

[DN]

KF Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 25 63 24 70 370RRK063-025-63 115,00

63 40 63 40 70 370RRK063-040-63 115,00

63 50 63 50 70 370RRK063-050-63 125,00

80 40 63 40 83 370RRK080-040-63 125,00

80 50 63 50 83 370RRK080-050-63 140,00

100 40 63 40 102 370RRK100-040-63 125,00

100 50 63 50 102 370RRK100-050-63 140,00

A

ØB

ØC

Aluminum EN AW-6082

ISO-K Flange Size

[DN]

KF Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 40 40 40,5 310RRG063-040-40 54,00

63 50 45 50 310RRG063-050-45 64,00


ISO-KF

104 Catalog 2010

Components



ISO-KF Half Nipple with External Tapering

Flange Size [DN]

Nom. WidthTapering

A [mm]

B [mm]

C [mm] Item No. Price €

16 19/26 40 26 12 120FRK016-19-26 85,00

25 29/32 45 32 23 120FRK025-29-32 95,00

40 45/40 54 40 38 120FRK040-45-40 105,00

BA

C

q In compliance with DIN 12242 Part 1q Temperature range: -196 to 300 °C

CF Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm] Item No. Price €

16 16 36 16 420RUG016-016-36 46,00

16 25 36 16 420RUG016-025-36 51,00

16 40 36 16 420RUG016-040-36 56,00

16 50 50 16 420RUG016-050-50 66,00

40 16 36 16 420RUG040-016-36 58,00

40 25 36 24 420RUG040-025-36 63,00

40 40 50 40 420RUG040-040-50 68,00

40 50 50 40 420RUG040-050-50 78,00

63 16 36 16 420RUG063-016-36 90,00

63 25 50 24 420RUG063-025-50 110,00

63 40 50 40 420RUG063-040-50 120,00

63 50 50 51 420RUG063-050-50 130,00

100 16 36 16 420RUG100-016-36 135,00

100 25 50 24 420RUG100-025-50 145,00

100 40 50 40 420RUG100-040-50 155,00

100 50 50 51 420RUG100-050-50 175,00

304/1.4301 Stainless Steel, CF Flange: 304L/1.4307 Stainless Steel

ISO-KF/CF Adapterq Pressure range: 1 bar to 10-7 mbar (elastomer seal)*q Pressure range: 1 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*q Other combinations and custom lengths available on short notice*Please observe limits for seal materials and fastening elements

A

ØB

ISO-KF

Catalog 2010 105

Components



ISO-KF Half Nipple with Internal Tapering

Flange Size [DN]

Nom. Width Tapering

A [mm]

B [mm]


10 14/35 38 35 14,5 120FRH010-14-35 70,00

10 19/26 41 26 18,8 120FRH010-19-26 80,00

A

C

Bq In compliance with DIN 12242 Part 2q Temperature range: -196 to 300 °C


Nickel-plated Brass 2.0401/CuZn 39Pb3

ISO-KF Flange with Pipe Thread, without Seal, Male

Flange Size [DN]

Thread [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 G1/4“ 30 9 9 120AEI010-0250 18,00

10 G3/8“ 30 9 12 120AEI010-0375 18,00

16 G1/4“ 30 9 9 120AEI016-0250 18,00

16 G1/2“ 30 12 16 120AEI016-0500 18,00

25 G1/2“ 30 12 16 120AEI025-0500 22,00

25 G3/4“ 30 12 20 120AEI025-0750 22,00

25 G1“ 30 12 24 120AEI025-1000 22,00

40 G1/4“ 30 9 9 120AEI040-0250 28,00

40 G1/2“ 30 12 16 120AEI040-0500 28,00

40 G1.25“ 30 14 35 120AEI040-1250 28,00

40 G1.5“ 30 14 40 120AEI040-1500 28,00

50 G2“ 35 16 50 120AEI050-2000 38,00

Flange Size [DN]

Thread [mm]

A [mm]

B [mm]

C [mm]

D [in]

Item No. Price €

10 G3/8“ 18 8 10 5 140AEI010-0375 18,00

16 G1/2“ 22 8 16 5 140AEI016-0500 20,00

25 G3/4“ 26,5 15 20 12 140AEI025-0750 24,00

25 G1“ 26,5 15 25 12 140AEI025-1000 26,00

40 G1 1/4“ 30 16 35 13 140AEI040-1250 31,00

40 G1 1/2“ 30 16 40 13 140AEI040-1500 32,00

50 G2“ 33 18 50 14 140AEI050-2000 42,00

A

ØC

B

D

A

ØC

B

Stainless Steelq Temperature range: -196 to 300 °C*Brassq Temperature range: -196 to 100 °C**Please observe limits for seal materials and fastening elements

ISO-KF

106 Catalog 2010

Components


q Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -15 to 200 °C*Please observe limits for seal materials and fastening elements


ISO-KF Flange with Pipe Thread and FPM Seal, Male

Flange Size [DN]

Thread A [mm]

B [mm]

C [mm]

SW [mm]

Item No. Price €

10 G3/8“ 35 16 10 19 122AED010-0375 28,00

16 G1/2“ 35 16 15 23 122AED016-0500 28,00

25 G3/4“ 45 24 21 32 122AED025-0750 40,00

25 G1“ 45 24 24 34 122AED025-1000 44,00

40 G1.5“ 50 28 40 50 122AED040-1500 90,00

A

ØC

B


ISO-KF Flange with Pipe Thread, without Seal, Female

Flange Size [DN]

Thread [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 G3/8“ 30 15 10 120AAU010-0375 35,18

16 G1/2“ 30 9 16 120AAU016-0500 26,00

25 G3/4“ 30 12 24 120AAU025-0750 28,00

40 G1“ 30 16 28 120AAU040-1000 53,00

50 G1.5“ 35 14 50 120AAU050-1500 73,50

50 G2“ 35 16 50 120AAU050-2000 65,00

AB

ØC

q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements


ISO-KF Flange with Pipe Thread and FPM Seal, Female

Flange Size [DN]

Thread [mm]

A [mm]

B [mm]

C [mm]

SW [mm]

Item No. Price €

10 G3/8“ 35 15 10 17 122AAD010-0375 39,00

16 G1/2“ 35 16 15 21 122AAD016-0500 50,00

25 G1“ 45 25 24 35 122AAD025-1000 60,00

40 G1.5“ 50 26 40 46 122AAD040-1500 74,00

B

A

ØC

q Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -15 to 200 °C**Please observe limits for seal materials and fastening elements

ISO-KF

Catalog 2010 107

Components


Stainless Steel 304/1.4301, for Metric Sizes

Stainless Steel 304/1.4301, for Imperial Sizes

ISO-KF Swagelok® Adapter

Flange Size [DN]

Tube outer diameter [mm]

A [mm]

Item No. Price €

16 4 mm 34 120ASW016-4 45,00

16 6 mm 40 120ASW016-6 35,00

16 8 mm 41 120ASW016-8 46,00

16 10 mm 43 120ASW016-10 45,00

25 16 mm 53 120ASW025-16 95,00

25 4 mm 31 120ASW025-4 46,00

25 6 mm 38 120ASW025-6 40,00

25 8 mm 39 120ASW025-8 47,00

25 10 mm 41 120ASW025-10 49,00

25 12 mm 43 120ASW025-12 85,00

40 4 mm 31 120ASW040-4 48,00

40 6 mm 38 120ASW040-6 39,00

40 8 mm 39 120ASW040-8 49,00

40 10 mm 41 120ASW040-10 51,00

40 12 mm 43 120ASW040-12 59,00

40 16 mm 49 120ASW040-16 66,00

50 4 mm 31 120ASW050-4 52,00

50 6 mm 38 120ASW050-6 49,00

50 8 mm 39 120ASW050-8 56,00

50 10 mm 41 120ASW050-10 55,00

50 12 mm 43 120ASW050-12 65,00

50 16 mm 49 120ASW050-16 75,00

Flange Size [DN]


A [mm]

Item No. Price €

16 1/8“ 33 120ASW016-0125 45,00

16 1/4“ 40 120ASW016-0250 35,00

16 3/8“ 42 120ASW016-0375 48,00

16 1/2“ 53 120ASW016-0500 60,00

25 1/8“ 30 120ASW025-0125 46,00

25 1/4“ 38 120ASW025-0250 37,00

25 3/8“ 40 120ASW025-0375 49,00

25 1/2“ 53 120ASW025-0500 56,00

25 3/4“ 54 120ASW025-0750 88,00

25 1“ 66 120ASW025-1000 150,00

A

q Original Swagelok® fittingq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

ISO-KF

108 Catalog 2010

Components


Flange Size [DN]

VCR Connector A [mm]

Item No. Price €

16 1/8“ 30 120AVF016-0125 55,00

16 1/4“ 36 120AVF016-0250 55,00

16 1/2“ 41 120AVF016-0500 75,00

25 1/8“ 27 120AVF025-0125 60,00

25 1/4“ 33 120AVF025-0250 60,00

25 1/2“ 37 120AVF025-0500 80,00

25 3/4“ 54 120AVF025-0750 105,00

25 1“ 60 120AVF025-1000 165,00

40 1/8“ 27 120AVF040-0125 70,00

40 1/4“ 33 120AVF040-0250 70,00

40 1/2“ 37 120AVF040-0500 95,00

40 3/4“ 51 120AVF040-0750 120,00

40 1“ 59 120AVF040-1000 180,00

50 1/8“ 27 120AVF050-0125 85,00

50 1/4“ 33 120AVF050-0250 85,00

50 1/2“ 37 120AVF050-0500 110,00

50 3/4“ 51 120AVF050-0750 135,00

50 1“ 56 120AVF050-1000 195,00


ISO-KF VCR Adapter, Female

Flange Size [DN]


A [mm]

Item No. Price €

40 1/8“ 30 120ASW040-0125 50,00

40 1/4“ 38 120ASW040-0250 42,00

40 3/8“ 40 120ASW040-0375 57,00

40 1/2“ 49 120ASW040-0500 60,00

40 3/4“ 51 120ASW040-0750 98,00

40 1“ 66 120ASW040-1000 175,00

50 1/8“ 30 120ASW050-0125 59,00

50 1/4“ 38 120ASW050-0250 57,00

50 3/8“ 40 120ASW050-0375 61,50

50 1/2“ 49 120ASW050-0500 69,00

50 3/4“ 51 120ASW050-0750 95,00

50 1“ 62 120ASW050-1000 195,00

ISO-KF Swagelok® Adapter, Stainless Steel 304/1.4301, for Imperial Sizes

q Original Swagelok® VCR adapterq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

A

ISO-KF

Catalog 2010 109

Components


Flange Size [DN]

VCR connector A [mm]

Item No. Price €

16 1/8“ 30 120AVM016-0125 55,00

16 1/4“ 36 120AVM016-0250 55,00

16 1/2“ 41 120AVM016-0500 75,00

25 1/8“ 27 120AVM025-0125 60,00

25 1/4“ 33 120AVM025-0250 60,00

25 1/2“ 37 120AVM025-0500 80,00

25 3/4“ 54 120AVM025-0750 105,00

25 1“ 60 120AVM025-1000 165,00

40 1/8“ 27 120AVM040-0125 70,00

40 1/4“ 33 120AVM040-0250 70,00

40 1/2“ 37 120AVM040-0500 95,00

40 3/4“ 51 120AVM040-0750 120,00

40 1“ 59 120AVM040-1000 180,00

50 1/8“ 27 120AVM050-0125 85,00

50 1/4“ 33 120AVM050-0250 85,00

50 1/2“ 37 120AVM050-0500 110,00

50 3/4“ 51 120AVM050-0750 135,00

50 1“ 56 120AVM050-1000 195,00


ISO-KF VCR Adapter, Maleq Original Swagelok® VCR Adapterq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

A

ISO-KF

110 Catalog 2010

Components




ISO-KF Flange with NPT Thread, Male

ISO-KF Flange with NPT Thread, Female

Flange Size [DN]

Thread A [mm]

B [mm]

Item No. Price €

16 NPT 1/4“ 50 7,1 120ANM016-0250 24,00

25 NPT 1/8“ 40 4,7 120ANM025-0125 25,00

25 NPT 1/4“ 50 7,1 120ANM025-0250 25,00

25 NPT 1/2“ 75 11,9 120ANM025-0500 27,00

25 NPT 3/4“ 75 15,9 120ANM025-0750 27,00

40 NPT 1/4“ 50 7,1 120ANM040-0250 30,00

40 NPT 1/2“ 75 11,9 120ANM040-0500 30,00

40 NPT 3/4“ 75 15,9 120ANM040-0750 36,00

40 NPT 1“ 75 25 120ANM040-1000 38,00

40 NPT 1.25“ 60 35 120ANM040-1250 56,00

50 NPT 1/4“ 50 7,1 120ANM050-0250 45,00

50 NPT 1/2“ 75 11,9 120ANM050-0500 45,00

50 NPT 3/4“ 75 15,9 120ANM050-0750 53,00

50 NPT 1“ 75 25 120ANM050-1000 56,00

Flange Size [DN]

Thread A [mm]

Item No. Price €

16 NPT 1/8“ 19 120ANF016-0125 18,00

16 NPT 1/4“ 19 120ANF016-0250 18,00

25 NPT 1/8“ 19 120ANF025-0125 19,00

25 NPT 1/4“ 19 120ANF025-0250 19,00

40 NPT 1/8“ 25,4 120ANF040-0125 24,00

40 NPT 1/4“ 25,4 120ANF040-0250 24,00

50 NPT 1/8“ 25,4 120ANF050-0125 65,00

50 NPT 1/4“ 25,4 120ANF050-0250 65,00

A

ØB

A



ISO-KF

Catalog 2010 111

Components




ISO-KF Hose Connector

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 40 12 8 110ASC010-12 7,50

10 40 8 4 110ASC010-8 7,50

16 40 12 8 110ASC016-12 7,50

16 40 8 4 110ASC016-8 7,50

25 40 12 8 110ASC025-12 9,50

25 40 8 4 110ASC025-8 9,50

40 40 12 8 110ASC040-12 15,00

40 40 8 4 110ASC040-8 15,00

50 40 12 8 110ASC050-12 21,00

50 40 8 4 110ASC050-8 21,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 40 12 8 120ASC010-12 12,00

10 40 8 4 120ASC010-8 12,00

16 40 12 8 120ASC016-12 12,00

16 40 8 4 120ASC016-8 12,00

25 40 12 8 120ASC025-12 12,00

25 40 16 12 120ASC025-16 12,00

25 40 20 16 120ASC025-20 12,00

25 40 8 4 120ASC025-8 12,00

40 40 12 8 120ASC040-12 16,00

40 40 16 12 120ASC040-16 16,00

40 40 20 16 120ASC040-20 16,00

40 40 25 20 120ASC040-25 16,00

40 40 8 4 120ASC040-8 16,00

50 40 12 8 120ASC050-12 28,00

50 40 8 4 120ASC050-8 28,00

A

ØC

ØB

q Fastener: See „Hose Clamp“Aluminumq Temperatur range: -196 to 150°CStainless Steelq Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Plasticq Temperature range: -20 to 80 °C**Please observe limits for seal materials and fastening elements

ISO-KF

112 Catalog 2010

Components




ISO-KF Adapter for PVC Hose

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 28 16 12 110ASP016-16 14,50

25 28 16 12 110ASP025-16 16,00

25 40 25 21 110ASP025-25 16,00

40 32 45 40 110ASP040-45 17,50

50 60 50 45 110ASP050-50 25,50

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 28 16 12 120ASP016-16 18,00

25 28 16 12 120ASP025-16 20,00

25 28 25 21 120ASP025-25 20,00

40 32 45 40 120ASP040-45 22,00

50 60 50 45 120ASP050-50 32,00

A

BØC

Aluminum EN AW-6061

ISO-KF 90° Elbow with Hose Adapter

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 40 40 17 13 110ASR016 28,00

25 50 50 26,5 22 110ASR025 38,00

40 65 65 40 37 110ASR040 48,00

A

B

ØD

ØC

q For connecting a PVC hose or CR sleeveq Fastener: See „Hose Clamp“q Please check the hose inner diameter before ordering

q For connecting PVC tubing with embedded springq Fastener: See „Hose Clamp“

ISO-KF Hose Connector, Plastic (POM)Flange Size

[DN]A

[mm]B

[mm]C


16 40 12 8 130ASC016-12 12,00

25 40 12 8 130ASC025-12 13,00

40 40 12 8 130ASC040-12 18,00

ISO-KF

Catalog 2010 113

Components



ISO-KF Tube Compression Fitting

Flange Size [DN]

A [mm]

Tube Diameter [mm]

Item No. Price €

16 10 38 120XQV016-10 85,00

16 12 38 120XQV016-12 88,00

25 16 45 120XQV025-16 115,00

40 20 46 120XQV040-20 150,00

40 25 46 120XQV040-25 165,00

40 28 50 120XQV040-28 180,00

A

q Tube can be fed throughq Manual opening and closingq Double-sealed with FKM O-ringsq Pressure range: 1 bar to 10-7 mbarq Temperature range: -15 to 130 °C*Please observe limits for seal materials and fastening elements

Steel zinc plated S235JR/1.0038

ISO-KF Hose Clampq Temperature range: -58°F to 302°F (-50 to 150°C)q 2 pieces per set

Flange Size [ISO-KF]

A = maximal diameter [mm]

B = minimal diameter [mm]

Item No. Price €

16 22 12 150SSS016 2,00

25 32 20 150SSS025 2,50

40 50 35 150SSS040 3,00

50 60 40 150SSS050 6,00

A-B

ISO-KF

114 Catalog 2010

Components


Flange Size [DN]

Pieces per Unit Item No. Price €

16 10 130FSK016-S10 4,00

16 20 130FSK016-S20 8,00

25 10 130FSK025-S10 4,50

25 20 130FSK025-S20 9,00

40 10 130FSK040-S10 5,00

40 20 130FSK040-S20 10,00

50 10 130FSK050-S10 6,00

50 20 130FSK050-S20 12,00

Polyethylene (PE)

ISO-KF Flange Caps

ISO-KF Stainless Steel Pipe

A = Tube OD Tube ID B = Wall Thickness Item No. Price €

6 4 1 170RRO006 17,00

8 6 1 170RRO008 23,00

10 8 1 170RRO010-10x1 23,00

12 10 1 170RRO012 26,00

14 10 2 170RRO010 25,00

20 16 2 170RRO016 36,00

28 24 2 170RRO025 40,00

44,5 40,5 2 170RRO040 48,00

54 50 2 170RRO050-54x2 68,00

57 51 3,0 170RRO050 68,00

B

Ø A

q Surface: Untreatedq Glass bead blasted on requestq Tolerance class: D3/T3 in acc. w/ EN ISO 1127: Outer diameter ± 0.75% and min. ± 0.3 mm; wall thickness ± 10% and min. ± 0.2 mmq Price: Per meter q Any length available up to 6 m (236 in) availableq Minimum order: 1 m (3.28 ft); orders > 1 m calculated pro rata

ISO-K Clamping Flange Components

ISO-K


ISO-K Fastening Elements

ISO-K Double Claw Clamps ........................................120

ISO-K Double Claw Clamp ..........................................120

ISO-K Claw Clamps .....................................................121

ISO-K Sgl. Claw Clamp f. Base Pl. w. Sealing Groove ....122

ISO-KF Chain Clamp for Large ISO-KF Flanges ............122

Contents

ISO-K Seals

ISO-K Centering Ring without Outer Ring ..................123

ISO-K Centering Ring with Outer Ring ........................125

ISO-K Centering Ring with Screen ..............................128

ISO-K O-Rings .............................................................129

ISO-K Metal Seal, Aligned at Inner Diameter ..............132

ISO-K Metal Seal, Aligned at Outer Diameter .............132

ISO-K Components

ISO-K Blank Flange .....................................................133

ISO-KF Large Flange, Blank Flange .............................134

ISO-K Weld Ring Flange .............................................135

ISO-KF Large Weld Ring Flange .................................137

ISO-K Half Nipple .......................................................137

ISO-K Rotatable Bolt Ring ...........................................139

ISO-F Screw Sets.........................................................140

ISO-K Full Nipple ........................................................140

ISO-K 90° Elbow, Radius .............................................141

ISO-K 90° Elbow, Mitered ...........................................142

ISO-K 45° Elbow, Mitered ...........................................142

ISO-K Tee ...................................................................143

ISO-K Reducer Tee ......................................................144

ISO-K to ISO-KF Reducer Tee ......................................145

ISO-K Cross ................................................................146

ISO-K Reducer Cross ...................................................147

ISO-K to ISO-KF Adapter Cross ...................................148

ISO-K 5-Way Cross .....................................................149

ISO-K 6-Way Cross .....................................................150

ISO-K Instrument Cross ..............................................151

ISO-K Cube .................................................................151

ISO-K/ISO-F Adapter Flange ........................................152

ISO-K Reducer, Straight ..............................................153

ISO-K Conical Reducer ................................................154

ISO-K/KF Straight Adapter ..........................................154

ISO-K/KF Conical Adapter ...........................................156

ISO-K/CF Adapter .......................................................157

ISO-K Flange with Pipe Thread and FPM Seal, Male ..... 158

ISO-K Flange with PVC Hose Adapter .........................158

ISO-K Flange with Sleeve Coupling .............................158

ISO-K Hose Clamp ......................................................159

ISO-K Swagelok® Adapter ..........................................159

ISO-K VCR Adapter, Female ........................................160

ISO-K VCR Adapter, Male ...........................................160

ISO-K Spacer Flange with Port ....................................161

ISO-K Stainless Steel Pipe............................................161

ISO-K Flange Caps ......................................................162

ISO-K


ISO-K Fasteners and Components

ISO-K components from TRINOS are manufactured according to DIN 28404 and ISO 1609 in standard sizes DN 63 to DN 630 and are compatible with products from other prominent manufactu-rers. All components are helium leak-tested and have leakage rates of better than 10-9 mbar × l/s.


An ISO-K (clamp flange) connection comprises two symmetrical flanges and an o-ring that is positioned and supported by an inner centering ring. The seal is additionally supported by an outer ring, especially in connection with larger nominal diameters. The con-tact pressure required for sealing is produced by means of screw clamps (Figure 1). A peripheral outer ridge on the back of the flan-ge prevents the screw clamps from slipping off. The flanges can be aligned about the main axis as desired.

Clamping claws are used to mount a clamp flange on a base plate. Clamping claws of different height will be employed, depending upon whether there is a centering ring on the base plate (Figure 2) or an o-ring in the base plate (Figure 3). Alternatively, it is also pos-sible to utilize a collar flange that is bolted to the base plate (Figure 4). The dimensions of the holes in the base plate follow from Table 1 below, “Major Dimensions of ISO-K Components.”

An ISO-K flange can be mounted to an ISO-F flange by means of claw clamps (Figure 5) or with the aid of a collar flange (Figure 6). It is installed by pushing the collar flange over the ISO-F flange and then placing a circlip in the outer peripheral groove in the ISO-K flange. The flanges can be aligned about the main axis as desired.

1

2

3

4

Fig. 1: ISO-K flange connection with screw clamps

Fig. 2: ISO-K flange mounted on base plate by claw clamps, with centering ring

Fig. 3: ISO-K flange mounted on base plate by claw clamps, with o-ring groove

Fig. 4: ISO-K flange mounted on base plate with collar flange

ISO-K


ISO-K connections are suitable for pressures of up to 10-7 mbar and can also be employed for overpressures of up to 1.5 bar. The pres-sure range can be increased to 10-9 mbar by means of aluminum-metal seal rings. Metallic seals require significantly higher contact pressures. In addition to bolted flange connections, screw clamps can also be employed, however a larger quantity will be required than in the case of elastomer seals (see Table 1).

The maximum possible application temperature will essentially be governed by the seal material in question. You will find information about this subject in the product descriptions and in the chapter entitled “Materials.”

The majority of ISO-K components consist of stainless steel. You will find information about our stainless steels and other alter-native materials for vacuum components in the chapter entitled “Materials.”

Special cleaning methods incorporating automated industrial equipment assure smooth surfaces for components that have low outgassing rates (desorption). Welded components are glass bead-blasted or chemically etched. We can offer you alternative surface treatments such as grinding, electropolishing or annealing upon request.

5

6

Fig. 5: ISO-K flange mounted on ISO-F flange by claw clamps

Fig. 6: ISO-K flange mounted on ISO-F flange with collar flange

Nominal diameter 63K 80K 100K 160K 200K 250K 320K 400K 500K 630K 800K*** 1000K***

Outside diameter A [mm] 95 110 130 180 240 290 370 450 550 690 860 1060

A [inch] 3.74 4.33 5.12 7.09 9.45 11.42 14.57 17.72 21.65 27.17 33.86 41.73

Flange height B [mm] 12 12 12 12 12 12 17 17 17 22 24 24

Centering ring nose C [mm] 70 83 102 153 213 261 318 400 501 651 800 1000

Typical tube dimension* D × E [mm] 76,1 × 3 88,9 × 3 108 × 3 159 × 3 219 × 3 273 × 3 324 × 3 406 × 3 508 × 4 660 × 5 812 × 6 1016 × 8

Typical inside dia.**F [mm] 70 93 102 153 213 261 318 400 500 650 800 1000

Number of screw clamps, elastomer seals

4 4 4 4 6 6 8 8 12 12 16 24

Number of screw clamps, aluminum-edged seals

4 6 8 10 12 14 - - - - - -

Number of claw clamps / bolts4 × M8

8 × M8

8 × M8

8 × M10

12 × M10

12 × M10

12 × M12

16 × M12

16 × M12

20 × M12

24 × M12

32 × M12

Outside dia. FLU****, G [mm] 130 145 165 225 285 335 - - - - - -

Bolt hole circle FLU****, H [mm] 110 125 145 200 260 310 395 480 580 720 890 1090

FLU**** holes, quantity x dia. [mm]

4 × 9 8 × 9 8 × 9 8 × 11 12 × 11 12 × 1112 × 13,5

16 × 13,5

16 × 13,5

20 × 13,5

24 × 13,5

32 × 13,5

Height FLU****, I [mm] 12 12 12 16 16 16 20 20 20 24 24 24

Major Dimensions of ISO-K Components

ØA

ØC

B

ØD

E

ØF

Ø G

Ø H

I

* You will find further tube dimensions in connection with the “Welding Flange Ring” and “Flange and Flange socket” products, in particular.** The minimum inside diameter will be determined by the combination of flange, tube and centering ring. Moreover, welds and manufacturing variances from the nominal size could locally restrict the clear diameter.*** 800K and 1000K are not listed in DIN 28 404.**** FLU = Rotatable Bolt Ring

ISO-K




q The highest and lowest permissible temperatures in the entire system will be governed by the lowest high temperature and

highest low temperature of the components involved.


q The flange connections and components have been developed in order to achieve vacuum-tight connections. They can only assu-me mechanical loads to a limited extent. In designing a vacuum system, it will therefore be necessary to review whether it will be necessary for static or dynamic loads to be assumed by additio-nal elements, e.g. holders.

ISO-K

120 Catalog 2010

Fastening Elements



Zinc-plated Steel 1.1141/C15E

Aluminum EN AW-6061; Screw: Stainless Steel A2-70

ISO-K Double Claw Clamps

ISO-K Double Claw Clamp

Flange Size [DN]

A [mm]

B = Thread C [mm]

Item No. Price €

63-250 61,5 M10 15 - 27 320BKL250 7,00

320-500 75 M12 27 - 33 320BKL500 15,00

630 85 M12 36 - 44 320BKL630 22,00

Flange Size [DN]

A [mm]

B = Thread C [mm]

Item No. Price €

63-250 61,5 M10 15 - 27 350BKL250 4,00

320-500 77 M12 27 - 33 350BKL500 9,50

630 86 M12 36 - 44 350BKL630 11,00

Flange Size [DN]

A [mm]

B = Thread C [mm]

Item No. Price €

63-100 50 M8 24 - 27 310BKL100 3,00

160-250 52 M10 27 - 32 310BKL250 4,00

320-500 65 M12 32 - 38 310BKL500 9,00

q Suitable for use with metal and elastomer seals q For stainless steel clamps we recommend using thread lubricantq Temperature range: 0 to 150 °C for zinc-plated steel; -196 to 300 °C for stainless steel

q Suitable for use with elastomer sealsq Temperature range: -196 to 200 °C

B

C

A

B

A

C

ISO-K

Catalog 2010 121

Fastening Elements


C D

B

A

C D

B

A

Aluminum EN AW-6061; Screw: Stainless Steel A2-70


Zinc-plated Steel 1.C15E/1141

ISO-K Claw Clampsq Zinc-plated and stainless steel versions are suitable for use with metal and elastomer sealsq Aluminum version suitable for use with elastomer sealsq Temperature ranges: -196 to 200 °C for aluminum; -196 to 300 °C stainless steel; 0 to 150 °C for zinc-plated steelq For installing an ISO-K on a base plate without O-ring grooveq For a base plate with O-ring groove, please see: „Single Claw Clamp for Base Plate with Sealing Groove“ BPD

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63-100 35 M8 23 14 310BPR100 3,00

160-250 35 M10 23 14 310BPR250 5,00

320-500 50 M12 30 21 310BPR500 8,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63-100 35 M8 23 14 320BPR100 5,50

160-250 35 M10 23 14 320BPR250 6,00

320-500 45 M12 30 21 320BPR500 11,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63-100 35 M8 23 14 350BPR100 4,50

160-250 35 M10 23 14 350BPR250 5,00

320-500 45 M12 30 21 350BPR500 9,00

630 55 M12 41,5 26 350BPR630 10,00

ISO-K

122 Catalog 2010

Fastening Elements


Steel, Zinc Plated C15E/1.1141Flange Size

[DN]A

[mm]B

[mm]C

[mm]D


63-100 30 M8 17,1 10,1 350BPD100 6,00

160-250 35 M10 19,1 10,1 350BPD250 8,00

320-500 45 M12 24,4 15,4 350BPD500 17,00

630 55 M12 35,9 20,4 350BPD630 20,00

ISO-K Single Claw Clamp for Base Plate with Sealing Groove

C D A

B

q Suitable for use with metal gaskets and elastomer sealsq Temperature range: 0 to 150 °Cq For installing an ISO-K flange on a base plate with O-ring grooveq If there is no O-ring groove, please use the longer single claw clamps BPR

Aluminum

ISO-KF Clamp f. Large ISO-KF Flanges

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 112 77 20 78 310BSK063 30,00

80 144 103 34 107 310BSK080 55,00

100 164 123 34 113 310BSK100 60,00

160 214 173 34 137 310BSK160 70,00

q For connecting two large ISO-KF flangesq Suitable for use with elastomer sealsq Temperature range: 0 to 150 °Cq Maximum pressure: 1.5 bar

AB

DC

ISO-K

Catalog 2010 123

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 312ZRG063 13,50

80 FPM 83 81 3,9 8 5,33 312ZRG080 17,00

100 FPM 102 100 3,9 8 5,33 312ZRG100 17,00

160 FPM 153 151 3,9 8 5,33 312ZRG160 26,00

200 FPM 213 211 3,9 8 5,33 312ZRG200 40,00

250 FPM 261 259 3,9 8 5,33 312ZRG250 44,00

320 FPM 318 313 5,6 14 7 312ZRG320 80,00

63 NBR 70 68 3,9 8 5,33 311ZRG063 14,50

80 NBR 83 81 3,9 8 5,33 311ZRG080 16,50

100 NBR 102 100 3,9 8 5,33 311ZRG100 19,00

160 NBR 153 151 3,9 8 5,33 311ZRG160 22,50

200 NBR 213 211 3,9 8 5,33 311ZRG200 28,00

250 NBR 261 259 3,9 8 5,33 311ZRG250 36,00

320 NBR 318 313 5,6 14 7 311ZRG320 72,00

63 CR 70 68 3,9 8 5,33 316ZRG063 14,50

80 CR 83 81 3,9 8 5,33 316ZRG080 19,00

100 CR 102 100 3,9 8 5,33 316ZRG100 19,00

160 CR 153 151 3,9 8 5,33 316ZRG160 22,50

200 CR 213 211 3,9 8 5,33 316ZRG200 28,00

250 CR 261 259 3,9 8 5,33 316ZRG250 36,00

320 CR 318 313 5,6 14 7 316ZRG320 72,00

63 EPDM 70 68 3,9 8 5,33 314ZRG063 14,50

80 EPDM 83 81 3,9 8 5,33 314ZRG080 19,00

100 EPDM 102 100 3,9 8 5,33 314ZRG100 19,00

160 EPDM 153 151 3,9 8 5,33 314ZRG160 22,50

200 EPDM 213 211 3,9 8 5,33 314ZRG200 28,00

250 EPDM 261 259 3,9 8 5,33 314ZRG250 36,00

320 EPDM 318 313 5,6 14 7 314ZRG320 72,00

63 Silikon 70 68 3,9 8 5,33 313ZRG063 15,00

80 Silikon 83 81 3,9 8 5,33 313ZRG080 21,00

100 Silikon 102 100 3,9 8 5,33 313ZRG100 21,00

160 Silikon 153 151 3,9 8 5,33 313ZRG160 30,00

200 Silikon 213 211 3,9 8 5,33 313ZRG200 43,00

250 Silikon 261 259 3,9 8 5,33 313ZRG250 47,00

320 Silikon 318 313 5,6 14 7 313ZRG320 85,00

Aluminum EN AW-6060

Ø BØ A

C

E

D

ISO-K Centering Ring without Outer RingTemperature ranges:q FPM, FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-K

124 Catalog 2010

Seals


ISO-K Centering Ring without Outer Ring, Stainless Steel 316Ti/1.4571 (DN 320: 304/1.4301)

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 322ZRG063 21,00

80 FPM 83 81 3,9 8 5,33 322ZRG080 28,00

100 FPM 102 100 3,9 8 5,33 322ZRG100 28,00

160 FPM 153 151 3,9 8 5,33 322ZRG160 43,00

200 FPM 213 211 3,9 8 5,33 322ZRG200 60,00

250 FPM 261 259 3,9 8 5,33 322ZRG250 70,00

320 FPM 318 313 5,6 14 7 322ZRG320 169,00

63 NBR 70 68 3,9 8 5,33 321ZRG063 21,00

80 NBR 83 81 3,9 8 5,33 321ZRG080 22,50

100 NBR 102 100 3,9 8 5,33 321ZRG100 24,00

160 NBR 153 151 3,9 8 5,33 321ZRG160 40,00

200 NBR 213 211 3,9 8 5,33 321ZRG200 55,00

250 NBR 261 259 3,9 8 5,33 321ZRG250 65,00

320 NBR 318 313 5,6 14 7 321ZRG320 153,00

63 CR 70 68 3,9 8 5,33 326ZRG063 21,00

80 CR 83 81 3,9 8 5,33 326ZRG080 24,00

100 CR 102 100 3,9 8 5,33 326ZRG100 24,00

160 CR 153 151 3,9 8 5,33 326ZRG160 40,00

200 CR 213 211 3,9 5,33 8 326ZRG200 62,00

250 CR 261 259 3,9 8 5,33 326ZRG250 70,00

320 CR 318 313 5,6 14 7 326ZRG320 168,00

63 EPDM 70 68 3,9 8 5,33 324ZRG063 21,00

80 EPDM 83 81 3,9 8 5,33 324ZRG080 24,00

100 EPDM 102 100 3,9 8 5,33 324ZRG100 24,00

160 EPDM 153 151 3,9 8 5,33 324ZRG160 40,00

200 EPDM 213 211 3,9 8 5,33 324ZRG200 62,00

250 EPDM 261 259 3,9 8 5,33 324ZRG250 70,00

320 EPDM 318 313 5,6 14 7 324ZRG320 168,00

63 Silikon 70 68 3,9 8 5,33 323ZRG063 21,00

80 Silikon 83 81 3,9 8 5,33 323ZRG080 27,00

100 Silikon 102 100 3,9 8 5,33 323ZRG100 27,00

160 Silikon 153 151 3,9 8 5,33 323ZRG160 42,00

200 Silikon 213 211 3,9 8 5,33 323ZRG200 63,00

250 Silikon 261 259 3,9 8 5,33 323ZRG250 69,00

320 Silikon 318 313 5,6 14 7 323ZRG320 195,00

ISO-K

Catalog 2010 125

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 312ZRA063 16,50

80 FPM 83 81 3,9 8 5,33 312ZRA080 22,50

100 FPM 102 100 3,9 8 5,33 312ZRA100 22,50

160 FPM 153 151 3,9 8 5,33 312ZRA160 34,00

200 FPM 213 211 3,9 8 5,33 312ZRA200 44,00

250 FPM 261 259 3,9 8 5,33 312ZRA250 50,00

320 FPM 318 313 5,6 14 7 312ZRA320 90,00

400 FPM 400 395 5,6 14 7 312ZRA400 120,00

500 FPM 501 496 5,6 14 7 312ZRA500 140,00

630 FPM 651 646 5,6 14 7 312ZRA630 170,00

800 FPM 800 795 5,6 14 7 312ZRA800 460,00

1000 FPM 1000 995 5,6 14 7 312ZRA1000 740,00

63 NBR 70 68 3,9 8 5,33 311ZRA063 14,50

80 NBR 83 81 3,9 8 5,33 311ZRA080 19,00

100 NBR 102 100 3,9 8 5,33 311ZRA100 19,00

160 NBR 153 151 3,9 8 5,33 311ZRA160 22,50

200 NBR 213 211 3,9 8 5,33 311ZRA200 32,00

250 NBR 261 259 3,9 8 5,33 311ZRA250 42,00

320 NBR 318 313 5,6 14 7 311ZRA320 82,00

400 NBR 400 395 5,6 14 7 311ZRA400 115,00

500 NBR 501 496 5,6 14 7 311ZRA500 132,00

630 NBR 651 646 5,6 14 7 311ZRA630 160,00

800 NBR 800 795 5,6 14 7 311ZRA800 460,00

1000 NBR 1000 995 5,6 14 7 311ZRA1000 740,00

63 CR 70 68 3,9 8 5,33 316ZRA063 14,50

80 CR 83 81 3,9 8 5,33 316ZRA080 19,00

100 CR 102 100 3,9 8 5,33 316ZRA100 19,00

160 CR 153 151 3,9 8 5,33 316ZRA160 34,00

200 CR 213 211 3,9 8 5,33 316ZRA200 40,00

250 CR 261 259 3,9 8 5,33 316ZRA250 50,00

320 CR 318 313 5,6 14 7 316ZRA320 85,00

400 CR 400 395 5,6 14 7 316ZRA400 115,00

500 CR 501 496 5,6 14 7 316ZRA500 132,00

630 CR 651 646 5,6 14 7 316ZRA630 160,00

800 CR 800 795 5,6 14 7 316ZRA800 455,00

1000 CR 1000 995 5,6 14 7 316ZRA1000 730,00

Aluminum EN AW-6061

E D

Ø A

Ø B

C

ISO-K Centering Ring with Outer Ringq Aluminum outer ringTemperature ranges:q FPM/FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-K

126 Catalog 2010

Seals


ISO-K Centering Ring with Outer Ring, Aluminum EN AW-6061Flange Size

[DN]O-Ring

MaterialA

[mm]B

[mm]C

[mm]D

[mm]E


63 EPDM 70 68 3,9 8 5,33 314ZRA063 14,50

80 EPDM 83 81 3,9 8 5,33 314ZRA080 19,00

100 EPDM 102 100 3,9 8 5,33 314ZRA100 19,00

160 EPDM 153 151 3,9 8 5,33 314ZRA160 22,50

200 EPDM 213 211 3,9 8 5,33 314ZRA200 32,00

250 EPDM 261 259 3,9 8 5,33 314ZRA250 42,00

320 EPDM 318 313 5,6 14 7 314ZRA320 82,00

400 EPDM 400 395 5,6 14 7 314ZRA400 115,00

500 EPDM 501 496 5,6 14 7 314ZRA500 132,00

630 EPDM 651 646 5,6 14 7 314ZRA630 160,00

800 EPDM 800 795 5,6 14 7 314ZRA800 460,00

1000 EPDM 1000 995 5,6 14 7 314ZRA1000 740,00

63 Silikon 70 68 3,9 8 5,33 313ZRA063 30,00

80 Silikon 83 81 3,9 8 5,33 313ZRA080 30,00

100 Silikon 102 100 3,9 8 5,33 313ZRA100 36,00

160 Silikon 153 151 3,9 8 5,33 313ZRA160 45,00

200 Silikon 213 211 3,9 8 5,33 313ZRA200 47,00

250 Silikon 261 259 3,9 8 5,33 313ZRA250 53,00

320 Silikon 318 313 5,6 14 7 313ZRA320 93,00

400 Silikon 400 395 5,6 14 7 313ZRA400 128,00

500 Silikon 501 496 5,6 14 7 313ZRA500 148,00

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 322ZRA063 25,00

80 FPM 83 81 3,9 8 5,33 322ZRA080 28,00

100 FPM 102 100 3,9 8 5,33 322ZRA100 28,00

160 FPM 153 151 3,9 8 5,33 322ZRA160 48,00

200 FPM 213 211 3,9 8 5,33 322ZRA200 70,00

250 FPM 261 259 3,9 8 5,33 322ZRA250 80,00

320 FPM 318 313 5,6 14 7 322ZRA320 195,00

63 NBR 70 68 3,9 8 5,33 321ZRA063 23,00

80 NBR 83 81 3,9 8 5,33 321ZRA080 23,50

100 NBR 102 100 3,9 8 5,33 321ZRA100 26,00

160 NBR 153 151 3,9 8 5,33 321ZRA160 45,00

200 NBR 213 211 3,9 8 5,33 321ZRA200 66,00

250 NBR 261 259 3,9 8 5,33 321ZRA250 74,00

320 NBR 318 313 3,9 14 7 321ZRA320 185,00

Stainless Steel 316Ti/1.4571 (DN 320: 304/1.4301) Outer Ring Aluminum EN AW-6060

ISO-K

Catalog 2010 127

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 CR 70 68 3,9 8 5,33 326ZRA063 23,00

80 CR 83 81 3,9 8 5,33 326ZRA080 26,00

100 CR 102 100 3,9 8 5,33 326ZRA100 26,00

160 CR 153 151 3,9 8 5,33 326ZRA160 45,00

200 CR 213 211 3,9 8 5,33 326ZRA200 66,00

250 CR 261 259 3,9 8 5,33 326ZRA250 74,00

320 CR 318 313 5,6 14 7 326ZRA320 168,00

63 EPDM 70 68 3,9 8 5,33 324ZRA063 23,00

80 EPDM 83 81 3,9 8 5,33 324ZRA080 26,00

100 EPDM 102 100 3,9 8 5,33 324ZRA100 26,00

160 EPDM 153 151 3,9 8 5,33 324ZRA160 45,00

200 EPDM 213 211 3,9 8 5,33 324ZRA200 66,00

250 EPDM 261 259 3,9 8 5,33 324ZRA250 74,00

320 EPDM 318 313 5,6 14 7 324ZRA320 195,00

63 Silikon 70 68 3,9 8 5,33 323ZRA063 23,00

80 Silikon 83 81 3,9 8 5,33 323ZRA080 26,00

100 Silikon 102 100 3,9 8 5,33 323ZRA100 26,00

160 Silikon 153 151 3,9 8 5,33 323ZRA160 45,00

200 Silikon 213 211 3,9 8 5,33 323ZRA200 66,00

250 Silikon 261 259 3,9 8 5,33 323ZRA250 74,00

320 Silikon 318 313 5,6 14 7 323ZRA320 195,00

ISO-K Centering Ring w. Outer Ring, Stainless Steel 316Ti/1.4571 (DN 320: 304/1.4301) Outer Ring Alu. EN AW-6060

ISO-K

128 Catalog 2010

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Mesh Opening

[mm]

Wire Thickn.


63 FPM 70 60 3,9 5,33 8 0,5 0,2 322ZRD063 55,00

80 FPM 83 73 3,9 5,33 8 0,6 0,2 322ZRD080 70,00

100 FPM 102 92 3,9 5,33 8 0,8 0,2 322ZRD100 90,00

160 FPM 153 143 3,9 5,33 8 1,2 0,2 322ZRD160 225,00

63 NBR 70 60 3,9 5,33 8 0,5 0,2 321ZRD063 55,00

80 NBR 83 73 3,9 5,33 8 0,6 0,2 321ZRD080 70,00

100 NBR 102 92 3,9 5,33 8 0,8 0,2 321ZRD100 90,00

160 NBR 153 143 3,9 5,33 8 1,2 0,2 321ZRD160 215,00

63 CR 70 60 3,9 5,33 8 0,5 0,2 326ZRD063 55,00

80 CR 83 73 3,9 5,33 8 0,6 0,2 326ZRD080 70,00

100 CR 102 92 3,9 5,33 8 0,8 0,2 326ZRD100 90,00

160 CR 153 143 3,9 5,33 8 1,2 0,2 326ZRD160 225,00

63 EPDM 70 60 3,9 5,33 8 0,5 0,2 324ZRD063 55,00

80 EPDM 83 73 3,9 5,33 8 0,6 0,2 324ZRD080 70,00

100 EPDM 102 92 3,9 5,33 8 0,8 0,2 324ZRD100 90,00

160 EPDM 153 143 3,9 5,33 8 1,2 0,2 324ZRD160 225,00

63 Silikon 70 60 3,9 5,33 8 0,5 0,2 323ZRD063 55,00

80 Silikon 83 73 3,9 5,33 8 0,6 0,2 323ZRD080 70,00

100 Silikon 102 92 3,9 5,33 8 0,8 0,2 323ZRD100 90,00

160 Silikon 153 143 3,9 5,33 8 1,2 0,2 323ZRD160 225,00

C

Ø BØ A

D

E


ISO-K Centering Ring with ScreenTemperature ranges:q FPM/FKM: -15 to 200 °Cq NBR: 25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-K

Catalog 2010 129

Seals


ISO-K O-RingsTemperature ranges:q FPM/FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

NBRFlange Size

[DN]A

[mm]B

[mm]Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 301DOR063-S1 1,55

63 76 5,33 5 301DOR063-S5 6,00

80 88,27 5,33 1 301DOR080-S1 4,50

80 88,27 5,33 5 301DOR080-S5 20,00

100 107 5,33 1 301DOR100-S1 2,20

100 107 5,33 5 301DOR100-S5 8,50

160 158 5,33 1 301DOR160-S1 3,15

160 158 5,33 5 301DOR160-S5 12,00

200 209 5,33 1 301DOR200-S1 4,70

200 209 5,33 5 301DOR200-S5 18,00

250 253 5,33 1 301DOR250-S1 5,75

250 253 5,33 5 301DOR250-S5 22,00

Ø A

B

FPM/FKMFlange Size

[DN]A

[mm]B

[mm]Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 302DOR063-S1 3,90

63 76 5,33 5 302DOR063-S5 15,00

80 88,27 5,33 1 302DOR080-S1 6,50

80 88,27 5,33 5 302DOR080-S5 20,00

100 107 5,33 1 302DOR100-S1 5,20

100 107 5,33 5 302DOR100-S5 20,00

160 158 5,33 1 302DOR160-S1 10,40

160 158 5,33 5 302DOR160-S5 40,00

200 209 5,33 1 302DOR200-S1 15,60

200 209 5,33 5 302DOR200-S5 60,00

250 253 5,33 1 302DOR250-S1 20,80

250 253 5,33 5 302DOR250-S5 80,00

320 330 7 1 302DOR320-S1 39,00

320 330 7 5 302DOR320-S5 150,00

400 405 7 1 302DOR400-S1 52,00

500 507 7 1 302DOR500-S1 65,00

630 659 7 1 302DOR630-S1 104,00

800 808 7 1 302DOR800-S1 169,00

1000 1003 7 1 302DOR1000-S1 234,00

ISO-K

130 Catalog 2010

Seals


Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 304DOR063-S1 1,80

63 76 5,33 5 304DOR063-S5 8,00

80 88,27 5,33 1 304DOR080-S1 2,00

80 88,27 5,33 5 304DOR080-S5 10,00

100 107 5,33 1 304DOR100-S1 6,50

100 107 5,33 5 304DOR100-S5 32,50

160 158 5,33 1 304DOR160-S1 8,50

160 158 5,33 5 304DOR160-S5 42,50

EPDM

CR

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 306DOR063-S1 1,80

63 76 5,33 5 306DOR063-S5 8,00

80 88,27 5,33 1 306DOR080-S1 2,00

80 88,27 5,33 5 306DOR080-S5 10,00

100 107 5,33 1 306DOR100-S1 6,50

100 107 5,33 5 306DOR100-S5 32,50

160 158 5,33 1 306DOR160-S1 8,50

160 158 5,33 5 306DOR160-S5 42,50

200 209 5,33 1 306DOR200-S1 6,00

200 209 5,33 5 306DOR200-S5 30,00

250 253 5,33 1 306DOR250-S1 8,00

250 253 5,33 5 306DOR250-S5 40,00

320 330 7 1 306DOR320-S1 15,00

320 330 7 5 306DOR320-S5 75,00

400 405 7 1 306DOR400-S1 35,00

500 507 7 1 306DOR500-S1 45,00

630 659 7 1 306DOR630-S1 80,00

800 808 7 1 306DOR800-S1 140,00

1000 1003 7 1 306DOR1000-S1 195,00

ISO-K O-Rings, NBR

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

320 330 7 1 301DOR320-S1 14,00

320 330 7 5 301DOR320-S5 56,00

400 405 7 1 301DOR400-S1 19,00

500 507 7 1 301DOR500-S1 24,00

630 659 7 1 301DOR630-S1 50,00

800 808 7 1 301DOR800-S1 115,00

1000 1003 7 1 301DOR1000-S1 155,00

ISO-K

Catalog 2010 131

Seals


ISO-K O-Rings, EPDM

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 303DOR063-S1 5,00

63 76 5,33 5 303DOR063-S5 20,00

80 88,27 5,33 1 303DOR080-S1 8,00

80 88,27 5,33 5 303DOR080-S5 32,00

100 107 5,33 1 303DOR100-S1 8,00

100 107 5,33 5 303DOR100-S5 32,00

160 158 5,33 1 303DOR160-S1 12,00

160 158 5,33 5 303DOR160-S5 48,00

200 209 5,33 1 303DOR200-S1 16,00

200 209 5,33 5 303DOR200-S5 64,00

250 253 5,33 1 303DOR250-S1 20,00

250 253 5,33 5 303DOR250-S5 80,00

320 330 7 1 303DOR320-S1 32,00

320 330 7 5 303DOR320-S5 128,00

400 405 7 1 303DOR400-S1 52,00

500 507 7 1 303DOR500-S1 64,00

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

200 209 5,33 1 304DOR200-S1 6,00

200 209 5,33 5 304DOR200-S5 30,00

250 253 5,33 1 304DOR250-S1 8,00

250 253 5.33 5 304DOR250-S5 40,00

320 330 7 1 304DOR320-S1 15,00

320 330 7 5 304DOR320-S5 75,00

400 405 7 1 304DOR400-S1 35,00

500 507 7 1 304DOR500-S1 45,00

630 659 7 1 304DOR630-S1 80,00

800 808 7 1 304DOR800-S1 140,00

1000 1003 7 1 304DOR1000-S1 195,00

Silicone

ISO-K

132 Catalog 2010

Seals


Aluminum EN AW-6082

Aluminum EN AW-6082

ISO-K Metal Seal, Aligned at Inner Diameter

ISO-K Metal Seal, Aligned at Outer Diameter

q For stainless steel flangesq Temperature range: -196 to 150 °Cq No gas permeationq For single use only

q For single use onlyq Temperature range: -196 to 150 °Cq No gas permeationq For single use only

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 77 70 4,6 7 310ZSK063-I 39,00

80 90 83 4,6 7 310ZSK080-I 43,00

100 109 102 4,6 7 310ZSK100-I 46,00

160 160 153 4,6 7 310ZSK160-I 74,00

200 220 213 4,6 7 310ZSK200-I 94,00

250 268 261 4,6 7 310ZSK250-I 145,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 95 88 4,6 7 310ZSK063 28,00

80 110 103 4,6 7 310ZSK080 32,00

100 130 123 4,6 7 310ZSK100 40,00

160 180 173 4,6 7 310ZSK160 65,00

200 240 233 4,6 7 310ZSK200 84,00

250 290 283 4,6 7 310ZSK250 140,00

C

Ø A

Ø B

D

Ø B

D

Ø A

C

ISO-K

Catalog 2010 133

Components




Aluminum EN AW-6082

ISO-K Blank Flange

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 95 70 12 4,5 320FBL063 27,50

80 110 83 12 4,5 320FBL080 35,00

100 130 102 12 4,5 320FBL100 35,00

160 180 153 12 4,5 320FBL160 65,00

200 240 213 12 4,5 320FBL200 180,00

250 290 261 12 4,5 320FBL250 195,00

320 370 318 17 4,5 320FBL320 395,00

400 450 400 17 4,5 320FBL400 575,00

500 550 501 17 4,5 320FBL500 850,00

630 690 651 22 4,5 320FBL630 1250,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 95 70 12 4,5 370FBL063 32,00

80 110 83 12 4,5 370FBL080 39,00

100 130 102 12 4,5 370FBL100 39,00

160 180 153 12 4,5 370FBL160 70,00

200 240 213 12 4,5 370FBL200 195,00

250 290 261 12 4,5 370FBL250 215,00

320 370 318 17 4,5 370FBL320 495,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 95 70 12 4,5 310FBL063 25,00

80 110 83 12 4,5 310FBL080 30,00

100 130 102 12 4,5 310FBL100 33,00

160 180 153 12 4,5 310FBL160 60,00

200 240 213 12 4,5 310FBL200 144,00

250 290 261 12 4,5 310FBL250 165,00

320 370 318 17 4,5 310FBL320 350,00

Ø A

Ø B

C

D

Aluminumq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -196 to 200 °C*Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Steelq Pressure range: 2.5 bar to 10-5 mbar*q Temperature range: 0 to 150 °C**Please observe limits for seal materials and fastening elements

ISO-K

134 Catalog 2010

Components


ISO-K Blank Flange, Nickel-plated Steel S235JR/1.0038

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 95 70 12 4,5 350FBL063 24,00

100 130 102 12 4,5 350FBL100 30,00

160 180 153 12 4,5 350FBL160 54,00

200 240 213 12 4,5 350FBL200 120,00

250 290 261 12 4,5 350FBL250 145,00

q Fastener: Chain clamp (item no. xxxBSKxxx)q Pressure range: 1.5 to 10-7 mbar (elastomer seal)*q Pressure range: 1.5 to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements


ISO-KF Large Flange, Blank Flange

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 87 70 5 3 120FBL063 20,00

80 114 83 12 8,3 120FBL080 25,00

100 134 102 12 8,3 120FBL100 30,00

160 190 153 12 8,3 120FBL160 50,00

D

Ø A

Ø B

C

ISO-K

Catalog 2010 135

Components



ISO-K Weld Ring Flangeq Annex S version with weld lip as welding guideStainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Steelq Pressure range: 2.5 bar to 10-5 mbarq Temperature range: 0 to 150 °C**Please observe limits for seal materials and fastening elements

Flange Size [DN]

Tube Ø [mm]

OD x Wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 63,5 x 1,65 2.50“ 95 70 12 63,8 6 320FAN063-63 30,00

63 70 x 2 - 95 70 12 70,3 6 320FAN063-70 26,00

63 76,1 x 3 3.00“ 95 70 12 76,4 6 320FAN063-76 26,00

63 76,1 x 3 3.00“ 95 70 12 76,4 8 320FAN063-76-S 28,00

80 76,1 x 3 3.00“ 110 83 12 76,4 6 320FAN080-76 38,00

80 88,9 x 3 3.50“ 110 83 12 89,2 6 320FAN080-88 32,00

100 101,6 x 2,1 4.00“ 130 102 12 101,9 6 320FAN100-101 32,00

100 104 x 2 - 130 102 12 104,3 6 320FAN100-104 30,00

100 108 x 3 4.25“ 130 102 12 108,3 6 320FAN100-108 32,00

100 108 x 3 4.25“ 130 102 12 108,3 8 320FAN100-108-S 34,00

100 114,3 x 2 4.50“ 130 102 12 114,6 6 320FAN100-114 42,00

160 152,4 x 2,4 6.00“ 180 153 12 152,7 6 320FAN160-152 55,00

160 159 x 3 - 180 153 12 159,3 6 320FAN160-159 48,00

160 159 x 3 - 180 153 12 159,3 8 320FAN160-159-S 52,00

200 203,2 x 2,4 8.00“ 240 213 12 203,6 6 320FAN200-203 140,00

200 219 x 3 - 240 213 12 219,4 6 320FAN200-219 135,00

200 219 x 3 - 240 213 12 219,4 8 320FAN200-219-S 140,00

250 254 x 2 10.00“ 290 261 12 254,4 6 320FAN250-254 175,00

250 267 x 3 - 290 261 12 267,4 6 320FAN250-267 180,00

250 273 x 3 10.75“ 290 261 12 273,4 6 320FAN250-273 175,00

250 273 x 3 10.75“ 290 261 12 273,4 8 320FAN250-273-S 182,00

320 306 x 3 12.00“ 370 318 17 306,4 8 320FAN320-305 405,00

320 324 x 3 12.75“ 370 318 17 324,4 8 320FAN320-324 405,00

320 324 x 3 12.75“ 370 318 17 324,4 10 320FAN320-324-S 415,00

400 406 x 3 16.00“ 450 400 17 406,5 8 320FAN400-406 570,00

400 406 x 3 16.00“ 450 400 17 406,5 10 320FAN400-406-S 585,00

500 508 x 4 20.00“ 550 501 17 508,5 8 320FAN500-508 715,00

500 508 x 4 20.00“ 550 501 17 508,5 10 320FAN500-508-S 735,00

630 610 x 5 24.00“ 690 651 22 610,5 12 320FAN630-610 1150,00

630 660 x 5 26.00“ 690 651 22 660,5 12 320FAN630-660 1150,00

630 660 x 5 26.00“ 690 651 22 660,5 12 320FAN630-660-S 1180,00

Ø A

Ø B

CE

Ø D

Ø A

Ø B

Ø D

CE

EE

Detail: version with weld lip

Detail: version without weld lip

ISO-K

136 Catalog 2010

Components


ISO-K Weld Ring Flange, Stainless Steel 316L/1.4404

Steel S235JR/1.0038Flange Size

[DN]Tube Ø

[mm]OD x Wall

[mm]A

[mm]B

[mm]C

[mm]D

[mm]E


63 76,1x 3 3,00“ 95 70 12 76,4 6 350FAN063-76 24,00

100 101,6x3,6 4.00“ 130 102 12 101,9 6 350FAN100-101 28,00

100 108 x 3 4.25“ 130 102 12 108,3 6 350FAN100-108 28,00

160 159x3 - 180 153 12 159,3 6 350FAN160-159 35,00

200 219x3 - 240 213 12 219,4 6 350FAN200-219 85,00

250 267x3 - 290 261 12 267,4 6 350FAN250-267 105,00

250 273x3 10.75“ 290 261 12 273,4 6 350FAN250-273 105,00

320 324x3 12.75“ 370 318 17 324,4 6 350FAN320-324 485,00

Flange Size [DN]

Tube Ø [mm]

OD x Wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 63,5 x 1,65 2.50“ 95 70 12 63,8 6 370FAN063-63 28,00

63 70 x 2 - 95 70 12 70,3 6 370FAN063-70 28,00

63 76,1 x 3 3.00“ 95 70 12 76,4 6 370FAN063-76 28,00

63 76,1 x 3 3.00“ 95 70 12 76,4 8 370FAN063-76-S 31,00

80 88,9 x 3 3.50“ 110 83 12 76,4 6 370FAN080-76 34,00

80 88,9 x 3 3.50“ 110 83 12 89,2 6 370FAN080-88 34,00

100 101,6 x 2,1 4.00“ 130 102 12 101,9 6 370FAN100-101 34,00

100 104 x 2 - 130 102 12 104,3 6 370FAN100-104 34,00

100 108 x 3 4.25“ 130 102 12 108,3 6 370FAN100-108 34,00

100 108 x 3 4.25“ 130 102 12 108,3 8 370FAN100-108-S 38,00

100 114,3 x 2 4.50“ 130 102 12 114,6 6 370FAN100-114 46,00

160 159 x 3 - 180 153 12 159,3 6 370FAN160-159 54,00

160 159 x 3 - 180 153 12 159,3 8 370FAN160-159-S 59,00

200 203,2 x 2,4 8.00“ 240 213 12 203,6 6 370FAN200-203 140,00

200 219 x 3 - 240 213 12 219,4 6 370FAN200-219 140,00

200 219 x 3 - 240 213 12 219,4 8 370FAN200-219-S 146,00

250 254 x 2 10.00“ 290 261 12 254,4 6 370FAN250-254 180,00

250 267 x 3 - 290 261 12 267,4 6 370FAN250-267 180,00

250 273 x 3 10.75“ 290 216 12 273,4 6 370FAN250-273 180,00

250 273 x 3 10.75“ 290 261 12 273,4 8 370FAN250-273-S 187,00

320 306 x 3 12.00“ 370 318 17 306,4 8 370FAN320-305 425,00

320 324 x 3 12.75“ 370 318 17 324,4 8 370FAN320-324 425,00

320 324 x 3 12.75“ 370 318 17 324,4 10 370FAN320-324-S 445,00

400 406 x 3 16.00“ 450 400 17 406,5 8 370FAN400-406 600,00

400 406 x 3 16.00“ 450 400 17 406,5 10 370FAN400-406-S 615,00

500 508 x 4 20.00“ 550 501 17 508,5 8 370FAN500-508 750,00

500 508 x 4 20.00“ 550 501 17 508,5 10 370FAN500-508-S 770,00

630 610 x 5 24.00“ 690 651 22 610,5 12 370FAN630-610 1200,00

630 660 x 5 26.00“ 690 651 22 660,5 12 370FAN630-660 1200,00

630 660 x 5 26.00“ 690 651 22 660,5 12 370FAN630-660-S 1250,00

ISO-K

Catalog 2010 137

Components



ISO-K Half Nipple

A

ØB

C

D

Flange Size [DN]

Tube Ø [mm]

OD x Wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 63,5 x 1,65 2.50“ 100 63,5 1,65 95 320FRA063-63-100 50,00

63 76,1 x 3 3.00“ 100 76,1 3 95 320FRA063-76-100 50,00

63 76,1 x 3 3.00“ 50 76,1 3 95 320FRA063-76-50 50,00

80 76,1 x 3 3.00“ 100 76,1 3 110 320FRA080-76-100 72,00

80 88,9 x 3 3.50“ 100 88,9 3 110 320FRA080-88-100 72,00

80 88,9 x 3 3.50“ 50 88,9 3 110 320FRA080-88-50 72,00

100 101,6 x 2,1 4.00“ 100 101,6 2,1 130 320FRA100-101-100 76,00

100 108 x 3 4.25“ 100 108 3 130 320FRA100-108-100 76,00

100 108 x 3 4.25“ 50 108 3 130 320FRA100-108-50 76,00

160 152,4 x 2,4 6.00“ 100 152,4 2,4 180 320FRA160-153-100 130,00

160 159 x 3 - 100 159 3 180 320FRA160-159-100 95,00

160 159 x 3 - 50 159 3 180 320FRA160-159-50 95,00

200 203,2 x 2,4 8.00“ 100 203,2 2,4 240 320FRA200-203-100 180,00

200 219 x 3 - 100 219 3 240 320FRA200-219-100 150,00

200 219 x 3 - 50 219 3 240 320FRA200-219-50 150,00

250 254 x 2 10.00“ 100 254 2 290 320FRA250-254-100 290,00

250 267 x 3 - 100 267 3 290 320FRA250-267-100 290,00

250 273 x 3 10.75“ 100 273 3 290 320FRA250-273-100 290,00

250 273 x 3 10.75“ 50 273 3 290 320FRA250-273-50 290,00

q Material specifications below pertain to the flange. Tubing piece: stainless steel, 304/1.4301 or betterStainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Steelq Pressure range: 2.5 bar to 10-5 mbar*q Temperature range: 0 to 150 °C**Please observe limits for seal materials and fastening elements

F

Ø C

E

Ø D

Ø A

Ø B

Flange Size [DN]

Tube Ø [mm]

OD x wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

63 63,5 x 1,65 2.50“ 87 70 60,2 63,7 5 3 120FAN063-63 20,00

80 76,1 x 2 3.00“ 114 83 72,1 76,4 12 8,3 120FAN080-76 25,00

100 101,6 x 2,1 4.00“ 134 102 97,4 101,8 12 8,3 120FAN100-101 28,00

160 152,4 x 2,4 6.00“ 190 153 147,6 152,7 12 8,3 120FAN160-152 50,00


ISO-KF Large Weld Ring Flange q Fastener: Chain clamp BSKq Pressure range: 1.5 to 10-7 mbar (elastomer seal)*q Pressure range: 1.5 to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

ISO-K

138 Catalog 2010

Components


Flange Size [DN]

Tube Ø [mm]

OD x Wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

320 324 x 3 12.75“ 100 324 3 370 320FRA320-324-100 575,00

400 406 x 3 16.00“ 100 406,4 3 450 320FRA400-406-100 800,00

500 508 x 4 20.00“ 100 508 4 550 320FRA500-508-100 995,00

630 660 x 5 26.00“ 100 660 5 690 320FRA630-660-100 1550,00

ISO-K Half Nipple, Stainless Steel 304/1.4301

Flange Size [DN]

Tube Ø [mm]

OD x Wall [mm]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 76,1 x 3 3.00“ 100 76,1 3 95 370FRA063-76-100 60,00

63 76,1 x 3 3.00“ 50 76,1 3 95 370FRA063-76-50 60,00

80 76,1 x 3 3.00“ 100 76,1 3 110 370FRA080-76-100 89,00

80 88,9 x 3 3.50“ 100 88,9 3 110 370FRA080-88-100 89,00

80 88,9 x 3 3.50“ 50 88,9 3 110 370FRA080-88-50 89,00

100 101,6 x 2,1 4.00“ 100 101,6 2,1 130 370FRA100-101-100 86,00

100 108 x 3 4.25“ 100 108 3 130 370FRA100-108-100 86,00

100 108 x 3 4.25“ 100 108 3 130 370FRA100-108-50 86,00

160 152,4 x 2,4 6.00“ 100 152,4 2,4 180 370FRA160-153-100 140,00

160 159 x 3 - 100 159 3 180 370FRA160-159-100 140,00

160 159 x 3 - 50 159 3 180 370FRA160-159-50 140,00

200 203,2 x 2,4 8.00“ 100 203,2 2,4 240 370FRA200-203-100 230,00

200 219 x 3 - 100 219 3 240 370FRA200-219-100 230,00

200 219 x 3 - 50 219 3 240 370FRA200-219-50 230,00

250 254 x 2 10.00“ 100 254 2 290 370FRA250-254-100 370,00

250 267 x 3 - 100 267 3 290 370FRA250-267-100 370,00

250 273 x 3 10.75“ 100 273 3 290 370FRA250-273-100 370,00

250 273 x 3 10.75“ 50 273 3 290 370FRA250-273-50 370,00

320 306 x 3 12.00“ 100 306 3 370 370FRA320-305-100 740,00

320 324 x 3 12.75“ 100 324 3 370 370FRA320-324-100 740,00

400 406 x 3 16.00“ 100 406 3 450 370FRA400-406-100 900,00

500 508 x 4 20.00“ 100 508 4 550 370FRA500-508-100 1150,00

630 660 x 5 26.00“ 100 660 5 690 370FRA630-660-100 1750,00


ISO-K

Catalog 2010 139

Components


ISO-K Half Nipple, Steel S235JR/1.0038Flange Size

[DN]Tube Ø

[mm]OD x Wall

[mm]A

[mm]B

[mm]C

[mm]D


63 76,1 x 3 3.00“ 100 76,1 3 95 350FRA063-76-100 65,00

100 108 x 3 4.25“ 100 108 3 130 350FRA100-108-100 75,00

160 159 x 3 - 100 159 3 180 350FRA160-159-100 90,00

200 219 x 3 - 100 219 3 240 350FRA200-219-100 215,00

250 267 x 3 - 100 267 3 290 350FRA250-267-100 285,00

250 273 x 3 10.75“ 100 273 3 290 350FRA250-273-100 285,00


Nickel- or chrome-plated Steel S235JR/1.0038

ISO-K Rotatable Bolt RingThe rotatable bolt ring lets you convert an ISO-K flange into a rotatable ISO-F flange.q Fasteners: Set of screws or single claw clamps for ISO-K/ISO-F connectionsq Circlip includedStainless Steelq Temperature range: -196 to 300 °CNickel- or chrome-plated Steelq Temperature range: 0 to 150 °C

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 130 110 12 9 95,5 320FLU063 48,00

80 145 125 12 9 110,5 320FLU080 75,00

100 165 145 12 9 130,5 320FLU100 85,00

160 225 200 16 11 180,7 320FLU160 145,00

200 285 260 16 11 240,7 320FLU200 225,00

250 335 310 16 11 290,7 320FLU250 250,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 130 110 12 9 95,5 350FLU063 36,00

100 165 145 12 9 130,5 350FLU100 53,00

160 225 200 16 11 180,7 350FLU160 92,00

200 285 260 16 11 240,7 350FLU200 125,00

250 335 310 16 11 290,7 350FLU250 160,00

320 425 395 20 13,5 370,8 350FLU320 320,00

400 510 480 20 13,5 450,8 350FLU400 495,00

500 610 580 20 13,5 550,8 350FLU500 710,00

630 750 720 24 13,5 691,0 350FLU630 1250,00

Ø A

Ø E

Ø B

C

D

ISO-K

140 Catalog 2010

Components



ISO-K Full Nippleq Other lengths and materials available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 88 70 320RZS063 100,00

63 176 70 320RZS063-176 120,00

80 98 83 320RZS080 115,00

80 196 83 320RZS080-196 138,00

100 108 102 320RZS100 130,00

100 216 102 320RZS100-216 156,00

160 138 153 320RZS160 170,00

160 276 153 320RZS160-276 204,00

200 178 213 320RZS200 325,00

200 356 213 320RZS200-356 390,00

250 208 267 320RZS250 480,00

250 416 267 320RZS250-416 576,00

AØ

B

Zinc-plated Steel S235JR/1.0038


ISO-F Screw Setsq For connecting two ISO-F flangesq For connecting an ISO-F flange and an ISO-K/ISO-F bolt ringq For connecting two ISO-K/ISO-F bolt ringsq Suitable for use with metal and elastomer sealsq Hexagon head screws, each with two washers and one nut

Flange Size [DN]

A [mm]

B Thread

PKG. [Qty.]

Item No. Price €

63-100 40 M8 8 550BSC100 10,00

160-250 50 M10 12 550BSC250 20,00

320-500 65 M12 16 550BSC500 22,00

630 70 M12 20 550BSC630 25,00

Flange Size [DN]

A [mm]

B Thread

PKG. [Qty.]

Item No. Price €

63-100 40 M8 8 520BSC100 9,60

160-250 50 M10 12 520BSC250 16,00

320-500 65 M12 16 520BSC500 36,00

630 70 M12 20 520BSC630 46,00

A

B

ISO-K

Catalog 2010 141

Components


ISO-K Full Nipple, Stainless Steel 316L/1.4404Flange Size

[DN]A

[mm]B


63 88 70 370RZS063 120,00

63 176 70 370RZS063-176 145,00

80 98 83 370RZS080 140,00

80 196 83 370RZS080-196 165,00

100 108 102 370RZS100 190,00

100 216 102 370RZS100-216 190,00

160 138 153 370RZS160 210,00

160 276 153 370RZS160-276 250,00

200 178 213 370RZS200 390,00

200 356 213 370RZS200-356 470,00

250 208 267 370RZS250 575,00

250 416 267 370RZS250-416 690,00



ISO-K 90° Elbow, Radiusq Larger flange sizes available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 88 66 320RRB063-90 89,00

80 98 81 320RRB080-90 155,00

100 108 100 320RRB100-90 135,00

160 232 150 320RRB160-90 290,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 88 66 370RRB063-90 110,00

80 98 81 370RRB080-90 186,00

100 108 100 370RRB100-90 162,00

160 232 150 370RRB160-90 348,00

A

AØ B

ISO-K

142 Catalog 2010

Components




ISO-K 45° Elbow, Mitered

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 82 70 320RWS063-45 135,00

80 100 83 320RWS080-45 205,00

100 128 102 320RWS100-45 215,00

160 147 153 320RWS160-45 335,00

200 178 213 320RWS200-45 550,00

250 208 267 320RWS250-45 650,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 82 70 370RWS063-45 180,00

80 100 83 370RWS080-45 245,00

100 128 102 370RWS100-45 255,00

160 147 153 370RWS160-45 400,00

200 178 213 370RWS200-45 660,00

250 208 267 370RWS250-45 780,00

A

A

45°

Ø B

q Larger flange sizes available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements



ISO-K 90° Elbow, Miteredq Larger flange sizes available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

160 138 153 320RWS160-90 290,00

200 178 213 320RWS200-90 490,00

250 208 267 320RWS250-90 590,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

160 138 153 370RWS160-90 350,00

200 178 213 370RWS200-90 588,00

250 208 267 370RWS250-90 708,00

A

A

Ø B

ISO-K

Catalog 2010 143

Components




ISO-K Tee

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 66 320RTS063 170,00

100 216 108 100 320RTS100 295,00

160 276 138 150 320RTS160 485,00

200 356 178 213 320RTS200 665,00

250 416 208 267 320RTS250 935,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 66 370RTS063 205,00

100 216 108 100 370RTS100 375,00

160 276 138 150 370RTS160 590,00

200 356 178 213 370RTS200 900,00

250 416 208 267 370RTS250 1130,00

A

B

ØCq Larger flange sizes available upon request


ISO-K

144 Catalog 2010

Components




ISO-K Reducer Tee

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

80 63 196 95 83 70 320RTR080-063 370,00

100 63 216 107 102 70 320RTR100-063 370,00

100 80 216 111 102 83 320RTR100-080 405,00

160 63 276 130 153 70 320RTR160-063 425,00

160 80 276 134 153 83 320RTR160-080 460,00

160 100 276 131 153 102 320RTR160-100 460,00

200 63 356 160 213 70 320RTR200-063 660,00

200 80 356 163 213 83 320RTR200-080 695,00

200 100 356 161 213 102 320RTR200-100 695,00

200 160 356 168 213 153 320RTR200-160 755,00

250 63 416 184 267 70 320RTR250-063 970,00

250 80 416 188 267 83 320RTR250-080 1005,00

250 100 416 185 267 102 320RTR250-100 1005,00

250 160 416 192 267 153 320RTR250-160 1065,00

250 200 416 195 267 213 320RTR250-200 1160,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

80 63 196 95 83 70 370RTR080-063 445,00

100 63 216 107 102 70 370RTR100-063 445,00

100 80 216 111 102 83 370RTR100-080 485,00

160 63 276 130 153 70 370RTR160-063 510,00

160 80 276 134 153 83 370RTR160-080 555,00

160 100 276 131 153 102 370RTR160-100 555,00

200 63 356 160 213 70 370RTR200-063 795,00

200 80 356 163 213 83 370RTR200-080 835,00

200 100 356 161 213 102 370RTR200-100 835,00

200 160 356 168 213 153 370RTR200-160 910,00

250 63 416 184 267 70 370RTR250-063 1160,00

250 80 416 188 267 83 370RTR250-080 1200,00

250 100 416 185 267 102 370RTR250-100 1200,00

250 160 416 192 267 153 370RTR250-160 1250,00

250 200 416 195 267 213 370RTR250-200 1400,00

B

ØC

Ø DA

q Other flange sizes and dimensions available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

ISO-K

Catalog 2010 145

Components




ISO-K to ISO-KF Reducer Tee

ISO-K Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 16 176 75 70 16 320RTR063-016 250,00

63 25 176 75 70 24 320RTR063-025 265,00

63 40 176 75 70 40,5 320RTR063-040 280,00

63 50 176 75 70 51 320RTR063-050 290,00

80 16 196 85 83 16 320RTR080-016 280,00

80 25 196 85 83 24 320RTR080-025 295,00

80 40 196 85 83 40,5 320RTR080-040 310,00

80 50 196 85 83 51 320RTR080-050 325,00

100 16 216 100 102 16 320RTR100-016 270,00

100 25 216 100 102 24 320RTR100-025 280,00

100 40 216 100 102 40,5 320RTR100-040 290,00

100 50 216 100 102 51 320RTR100-050 300,00

160 16 276 125 153 16 320RTR160-016 335,00

160 25 276 125 153 24 320RTR160-025 350,00

160 40 276 125 153 40,5 320RTR160-040 365,00

160 50 276 125 153 51 320RTR160-050 380,00

200 16 356 160 213 16 320RTR200-016 570,00

200 25 356 160 213 24 320RTR200-025 585,00

200 40 356 160 213 40,5 320RTR200-040 600,00

200 50 356 160 213 51 320RTR200-050 615,00

250 16 416 185 267 16 320RTR250-016 880,00

250 25 416 185 267 24 320RTR250-025 895,00

250 40 416 185 267 40,5 320RTR250-040 910,00

250 50 416 185 267 51 320RTR250-050 925,00

ISO-K Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 16 176 75 70 16 370RTR063-016 300,00

63 25 176 75 70 24 370RTR063-025 320,00

63 40 176 75 70 40,5 370RTR063-040 335,00

63 50 176 75 70 51 370RTR063-050 350,00

80 16 196 85 83 16 370RTR080-016 335,00

80 25 196 85 83 24 370RTR080-025 355,00

80 40 196 85 83 40,5 370RTR080-040 375,00

B

ØC

Ø DA


ISO-K

146 Catalog 2010

Components


ISO-K Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

80 50 196 85 83 51 370RTR080-050 390,00

100 16 216 100 102 16 370RTR100-016 325,00

100 25 216 100 102 24 370RTR100-025 335,00

100 40 216 100 102 40,5 370RTR100-040 350,00

100 50 216 100 102 51 370RTR100-050 360,00

160 16 276 125 153 16 370RTR160-016 400,00

160 25 276 125 153 24 370RTR160-025 420,00

160 40 276 125 153 40,5 370RTR160-040 440,00

160 50 276 125 153 51 370RTR160-050 455,00

200 16 356 160 213 16 370RTR200-016 685,00

200 25 356 160 213 24 370RTR200-025 700,00

200 40 356 160 213 40,5 370RTR200-040 720,00

200 50 356 160 213 51 370RTR200-050 740,00

250 16 416 185 267 16 370RTR250-016 1060,00

250 25 416 185 267 24 370RTR250-025 1080,00

250 40 416 185 267 40,5 370RTR250-040 1100,00

250 50 416 185 267 51 370RTR250-050 1110,00



ISO-K to ISO-KF Reducer Tee, Stainless Steel 316L/1.4404

ISO-K Cross

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 66 320RKS063 300,00

100 216 108 100 320RKS100 450,00

160 276 138 150 320RKS160 725,00

200 356 178 213 320RKS200 995,00

250 416 208 267 320RKS250 1250,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 66 370RKS063 360,00

100 216 108 100 370RKS100 540,00

160 276 138 150 370RKS160 870,00

200 356 178 213 370RKS200 1200,00

250 416 208 267 370RKS250 1450,00

ØC

B

A


ISO-K

Catalog 2010 147

Components




ISO-K Reducer Cross

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm] Item No. Price €

80 63 196 95 83 70 320RKR080-063 470,00

100 63 216 107 102 70 320RKR100-063 470,00

100 80 216 111 102 83 320RKR100-080 520,00

160 63 276 130 153 70 320RKR160-063 525,00

160 80 276 134 153 83 320RKR160-080 575,00

160 100 276 131 153 102 320RKR160-100 575,00

200 63 356 160 213 70 320RKR200-063 760,00

200 80 356 163 213 83 320RKR200-080 810,00

200 100 356 161 213 102 320RKR200-100 810,00

200 160 356 168 213 153 320RKR200-160 895,00

250 63 416 184 267 70 320RKR250-063 1070,00

250 80 416 188 267 83 320RKR250-080 1120,00

250 100 416 185 267 102 320RKR250-100 1120,00

250 160 416 192 267 153 320RKR250-160 1225,00

250 200 416 195 267 213 320RKR250-200 1350,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]


80 63 196 95 83 70 370RKR080-063 564,00

100 63 216 107 102 70 370RKR100-063 564,00

100 80 216 111 102 83 370RKR100-080 624,00

160 63 276 130 153 70 370RKR160-063 630,00

160 80 276 134 153 83 370RKR160-080 690,00

160 100 276 131 153 102 370RKR160-100 690,00

200 63 356 160 213 70 370RKR200-063 912,00

200 80 356 163 213 83 370RKR200-080 972,00

200 100 356 161 213 102 370RKR200-100 972,00

200 160 356 168 213 153 370RKR200-160 1074,00

250 63 416 184 267 70 370RKR250-063 1284,00

250 80 416 188 267 83 370RKR250-080 1344,00

250 100 416 185 267 102 370RKR250-100 1344,00

250 160 416 192 267 153 370RKR250-160 1470,00

250 200 416 195 267 213 370RKR250-200 1620,00

B

Ø D

ØC

A


ISO-K

148 Catalog 2010

Components




ISO-K to ISO-KF Adapter Cross

ISO-K Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]


63 16 176 75 70 16 320RKR063-016 340,00

63 25 176 75 70 24 320RKR063-025 370,00

63 40 176 75 70 40,5 320RKR063-040 400,00

63 50 176 75 70 51 320RKR063-050 460,00

80 16 196 85 83 16 320RKR080-016 400,00

80 25 196 85 83 24 320RKR080-025 430,00

80 40 196 85 83 40,5 320RKR080-040 460,00

80 50 196 85 83 51 320RKR080-050 490,00

100 16 216 100 102 16 320RKR100-016 350,00

100 25 216 100 102 24 320RKR100-025 380,00

100 40 216 100 102 40,5 320RKR100-040 410,00

100 50 216 100 102 51 320RKR100-050 495,00

160 16 276 125 153 16 320RKR160-016 405,00

160 25 276 125 153 24 320RKR160-025 435,00

160 40 276 125 153 40,5 320RKR160-040 465,00

160 50 276 125 153 51 320RKR160-050 545,00

200 16 356 160 213 16 320RKR200-016 640,00

200 25 356 160 213 24 320RKR200-025 670,00

200 40 356 160 213 40,5 320RKR200-040 700,00

200 50 356 160 213 51 320RKR200-050 730,00

250 16 416 185 267 16 320RKR250-016 950,00

250 25 416 185 267 24 320RKR250-025 980,00

250 40 416 185 267 40,5 320RKR250-040 1010,00

250 50 416 185 267 51 320RKR250-050 1040,00

ISO-K Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]


63 16 176 75 70 16 370RKR063-016 408,00

63 25 176 75 70 24 370RKR063-025 444,00

63 40 176 75 70 40,5 370RKR063-040 480,00

63 50 176 75 70 51 370RKR063-050 550,00

80 16 196 85 83 16 370RKR080-016 480,00

80 25 196 85 83 24 370RKR080-025 516,00

80 40 196 85 83 40,5 370RKR080-040 552,00

B

ØC

Ø DA


ISO-K

Catalog 2010 149

Components


ISO-K Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]


80 50 196 85 83 51 370RKR080-050 588,00

100 16 216 100 102 16 370RKR100-016 420,00

100 25 216 100 102 24 370RKR100-025 456,00

100 40 216 100 102 40,5 370RKR100-040 492,00

100 50 216 100 102 51 370RKR100-050 595,00

160 16 276 125 153 16 370RKR160-016 420,00

160 25 276 125 153 24 370RKR160-025 465,00

160 40 276 125 153 40,5 370RKR160-040 540,00

160 50 276 125 153 51 370RKR160-050 655,00

200 16 356 160 213 16 370RKR200-016 768,00

200 25 356 160 213 24 370RKR200-025 804,00

200 40 356 160 213 40,5 370RKR200-040 840,00

200 50 356 160 213 51 370RKR200-050 876,00

250 16 416 185 267 16 370RKR250-016 1140,00

250 25 416 185 267 24 370RKR250-025 1176,00

250 40 416 185 267 40,5 370RKR250-040 1212,00

250 50 416 185 267 51 370RKR250-050 1248,00

ISO-K to ISO-KF Adapter Cross, Stainless Steel 316L/1.4404



ISO-K 5-Way Cross

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 70 320RKF063 625,00

100 216 108 102 320RKF100 825,00

160 276 138 153 320RKF160 1150,00

200 356 178 213 320RKF200 1660,00

250 416 208 267 320RKF250 2250,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 70 370RKF063 702,00

100 216 108 102 370RKF100 942,00

160 276 138 153 370RKF160 1518,00

200 356 178 213 370RKF200 2094,00

250 416 208 267 370RKF250 2770,00

ØC

A

B

q Other flange sizes and dimensions available upon requestq Stainless Steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*

ISO-K

150 Catalog 2010

Components




ISO-K 6-Way Cross

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 70 320RKD063 635,00

100 216 108 102 320RKD100 850,00

160 276 138 153 320RKD160 1350,00

200 356 178 213 320RKD200 1895,00

250 416 208 267 320RKD250 2550,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 70 370RKD063 760,00

100 216 108 102 370RKD100 1020,00

160 276 138 153 370RKD160 1620,00

200 356 178 213 370RKD200 2275,00

250 416 208 267 370RKD250 3050,00

ØC

A

B


ISO-K

Catalog 2010 151

Components


316L/1.4404 Stainless steel

ISO-K Cubeq Up to NW 100: manufactured from forged cubeq Beyond NW160: manufactured from welded platesq ISO-K flange mounted with claw clamps (BPR) or with screws in combination with a rotatable bolt ring (FLU)

Flange Size [ISO-K]

A [mm]

B [mm]

Bolt Circle [mm]

Threads Item No. Price €

63 130 70 110 M8 (4 x 90°) 370RKK063 2000,00

100 165 102 145 M8 (8 x 45°) 370RKK100 3000,00

160 225 153 200 M10 (8 x 45°) 370RKK160 5100,00

200 285 213 260 M10 (12 x 30°) 370RKK200 7600,00

A

B

Ø LK

Stainless Steel 316L/1.4404Flange Size

[DN]A

[mm]B

[mm]C

[mm]D

[mm]E


63 88 44 59 64 66 370RKM063 325,00

100 100 50 77 80 82 370RKM100 405,00

200 178 89 130 130 130 370RKM200 650,00

250 208 104 155 155 155 370RKM250 780,00


ISO-K Instrument Crossq Three ports: DN 16 KF, DN 25 KF and DN 40 KFq Other flange sizes and dimensions available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 88 44 59 64 66 320RKM063 270,00

100 100 50 77 80 82 320RKM100 340,00

160 100 50 107 105 107 320RKM160 395,00

200 178 89 130 130 130 320RKM200 540,00

250 208 104 155 155 155 320RKM250 755,00

AB

E

C D

ISO-K

152 Catalog 2010

Components




ISO-K/ISO-F Adapter Flange

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [Thread]

Item No. Price €

160 63 180 130 22 70 110 M8 320FLR160-063 195,00

160 100 180 165 22 102 145 M8 320FLR160-100 215,00

200 100 240 165 20 102 145 M8 320FLR200-100 270,00

200 160 240 225 26 153 200 M10 320FLR200-160 285,00

250 160 290 225 22 153 200 M10 320FLR250-160 485,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [Thread]

Item No. Price €

160 63 180 130 22 70 110 M8 370FLR160-063 300,00

160 100 180 165 22 102 145 M8 370FLR160-100 306,00

200 100 240 165 20 102 145 M8 370FLR200-100 395,00

200 160 240 225 26 153 200 M10 370FLR200-160 415,00

250 160 290 225 22 153 200 M10 370FLR250-160 715,00

A

D

E

B

C

F

q Other flange sizes and dimensions available upon requestq Reduced nominal width implemented with ISO-F blind hole threadsq Stainless steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*

ISO-K

Catalog 2010 153

Components




ISO-K Reducer, Straightq Other flange sizes and dimensions available upon requestq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)**Please observe limits for seal materials and fastening elements

Flange Size [DN]

Reduced Flange Size

[ISO-K]

A [mm]

B [mm]

Item No. Price €

80 63 50 70 320RRG080-063-50 95,00

100 63 50 70 320RRG100-063-50 100,00

100 80 50 83 320RRG100-080-50 120,00

160 63 50 70 320RRG160-063-50 122,00

160 80 50 83 320RRG160-080-50 140,00

160 100 50 102 320RRG160-100-50 142,00

200 63 50 70 320RRG200-063-50 335,00

200 100 50 102 320RRG200-100-50 355,00

200 160 50 153 320RRG200-160-50 385,00

250 63 50 70 320RRG250-063-50 410,00

250 100 50 102 320RRG250-100-50 455,00

250 160 50 153 320RRG250-160-50 495,00

250 200 50 213 320RRG250-200-50 555,00

Flange Size [DN]

Reduced Flange Size

[ISO-K]

A [mm]

B [mm]

Item No. Price €

80 63 50 70 370RRG080-063-50 125,00

100 63 50 70 370RRG100-063-50 145,00

100 80 50 83 370RRG100-080-50 175,00

160 63 50 70 370RRG160-063-50 175,00

160 80 50 83 370RRG160-080-50 200,00

160 100 50 102 370RRG160-100-50 200,00

200 63 50 70 370RRG200-063-50 350,00

200 100 50 102 370RRG200-100-50 405,00

200 160 50 153 370RRG200-160-50 415,00

250 63 50 70 370RRG250-063-50 595,00

250 100 50 102 370RRG250-100-50 650,00

250 160 50 153 370RRG250-160-50 650,00

250 200 50 213 370RRG250-200-50 715,00

A

ØB

ISO-K

154 Catalog 2010

Components





ISO-K Conical Reducer

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]


80 63 63 70 83 320RRK080-063-63 120,00

100 63 63 70 102 320RRK100-063-63 135,00

100 80 63 83 102 320RRK100-080-63 150,00

160 63 63 70 153 320RRK160-063-63 225,00

160 100 104 102 153 320RRK160-100-104 265,00

200 160 105 159 219 320RRK200-160-105 485,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]


80 63 63 70 83 370RRK080-063-63 145,00

100 63 63 70 102 370RRK100-063-63 160,00

100 80 63 83 102 370RRK100-080-63 180,00

160 63 63 70 153 370RRK160-063-63 270,00

160 100 104 102 153 370RRK160-100-104 320,00

200 160 105 159 219 370RRK200-160-105 580,00

A

ØB

ØC



ISO-K/KF Straight Adapter

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

63 16 50 16 320RRG063-016-50 55,00

63 25 50 24 320RRG063-025-50 56,00

63 40 40 40,5 320RRG063-040-40 58,00

63 40 50 40,5 320RRG063-040-50 58,00

63 50 50 50 320RRG063-050-50 69,00

A

ØB

ISO-K

Catalog 2010 155

Components


Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

63 16 50 16 370RRG063-016-50 78,00

63 25 50 24 370RRG063-025-50 83,00

63 40 40 40,5 370RRG063-040-40 86,00

63 40 50 40,5 370RRG063-040-50 96,00

63 50 50 50 370RRG063-050-50 102,00

80 25 50 24 370RRG080-025-50 94,00

80 40 50 40,5 370RRG080-040-50 102,00

80 50 50 50 370RRG080-050-50 118,00

100 25 50 24 370RRG100-025-50 115,00

100 40 38,5 40,5 370RRG100-040-38 120,00

100 40 50 40,5 370RRG100-040-50 120,00

100 50 50 50 370RRG100-050-50 125,00

160 40 50 40,5 370RRG160-040-50 145,00

160 50 50 50 370RRG160-050-50 155,00

200 40 50 40,5 370RRG200-040-50 400,00

200 50 50 50 370RRG200-050-50 435,00

250 40 50 40,5 370RRG250-040-50 510,00

250 50 50 50 370RRG250-050-50 540,00

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

80 25 50 24 320RRG080-025-50 65,00

80 40 50 40,5 320RRG080-040-50 70,00

80 50 50 50 320RRG080-050-50 82,00

100 25 50 24 320RRG100-025-50 65,00

100 40 50 40,5 320RRG100-040-50 70,00

100 50 50 50 320RRG100-050-50 82,00

160 40 50 40,5 320RRG160-040-50 100,00

160 50 50 50 320RRG160-050-50 110,00

200 40 50 40,5 320RRG200-040-50 295,00

200 50 50 50 320RRG200-050-50 315,00

250 40 50 40,5 320RRG250-040-50 355,00

250 50 50 50 320RRG250-050-50 375,00


ISO-K/KF Straight Adapter, Stainless Steel 304/1.4301

ISO-K

156 Catalog 2010

Components




ISO-K/KF Conical Adapter

ISO-K Flange Size

[DN]

KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 25 63 24 70 320RRK063-025-63 96,00

63 40 63 40 70 320RRK063-040-63 96,00

63 50 63 50 70 320RRK063-050-63 105,00

80 40 63 40 83 320RRK080-040-63 105,00

80 50 63 50 83 320RRK080-050-63 115,00

100 40 63 40 102 320RRK100-040-63 105,00

100 50 63 50 102 320RRK100-050-63 115,00

ISO-K Flange Size

[DN]

KF Flange Size

[DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 25 63 24 70 370RRK063-025-63 115,00

63 40 63 40 70 370RRK063-040-63 115,00

63 50 63 50 70 370RRK063-050-63 125,00

80 40 63 40 83 370RRK080-040-63 125,00

80 50 63 50 83 370RRK080-050-63 140,00

100 40 63 40 102 370RRK100-040-63 125,00

100 50 63 50 102 370RRK100-050-63 140,00

A

ØB

ØC

Aluminum EN AW-6082

ISO-K Flange Size

[DN]

KF Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

63 40 40 40,5 310RRG063-040-40 54,00

63 50 45 50 310RRG063-050-45 64,00


ISO-K

Catalog 2010 157

Components


Stainless steel 304L

ISO-K/CF Adapter

Flange Size [ISO-K]

Flange Size [CF]

A [mm]

B [mm]

Item No. Price €

63 16 60 16 420RUG016-063-60 85,00

63 40 70 37 420RUG040-063-70 95,00

63 63 90 66 420RUG063-063-90 150,00

63 100 90 70 420RUG100-063-90 200,00

63 160 90 70 420RUG160-063-90 265,00

63 200 90 70 420RUG200-063-90 305,00

63 250 90 70 420RUG250-063-90 475,00

80 16 60 16 420RUG016-080-60 95,00

80 40 70 37 420RUG040-080-70 105,00

80 63 90 66 420RUG063-080-90 170,00

80 100 90 83 420RUG100-080-90 210,00

80 160 90 83 420RUG160-080-90 265,00

80 200 90 83 420RUG200-080-90 315,00

80 250 90 83 420RUG250-080-90 495,00

100 16 60 16 420RUG016-100-60 95,00

100 40 70 37 420RUG040-100-70 105,00

100 63 90 66 420RUG063-100-90 185,00

100 100 90 102 420RUG100-100-90 230,00

100 160 90 102 420RUG160-100-90 275,00

100 200 90 102 420RUG200-100-90 325,00

100 250 90 102 420RUG250-100-90 505,00

160 16 60 16 420RUG016-160-60 135,00

160 40 70 37 420RUG040-160-70 155,00

160 63 90 66 420RUG063-160-90 235,00

160 100 90 102 420RUG100-160-90 265,00

160 160 100 153 420RUG160-160-100 355,00

160 200 90 153 420RUG200-160-90 375,00

160 250 90 153 420RUG250-160-90 525,00

200 40 70 37 420RUG040-200-70 240,00

200 63 90 66 420RUG063-200-90 325,00

200 100 90 102 420RUG100-200-90 365,00

200 160 100 153 420RUG160-200-100 405,00

200 200 110 200 420RUG200-200-110 435,00

200 250 110 213 420RUG250-200-110 545,00

250 40 70 37 420RUG040-250-70 275,00

250 63 90 66 420RUG063-250-90 350,00

A

ØB

q Pressure range: 1 bar to 10-7 mbar (elastomer seal)*q Pressure range: 1 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*q Other combinations and custom lengths available on short notice*Please observe limits for seal materials and fastening elements

ISO-K

158 Catalog 2010

Components



ISO-K Flange with Pipe Thread and FPM Seal, Maleq FPM O-ring includedq Pressure range: 2.5 bar to 10-7 mbar*q Temperature range: -15 to 200 °C***Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B Thread

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

63 59 G2“ 23 5 6 (6 x 60°) 48 320AED063-2000 155,00

63 60 G3“ 23 5 6 (6 x 60°) 50 320AED063-3000 165,00

100 60 G3“ 23 5 6 (6 x 60°) 70 320AED100-3000 185,00

D

A

C

B

E

F

Flange Size [ISO-K]

Flange Size [CF]

A [mm]

B [mm]

Item No. Price €

250 100 90 102 420RUG100-250-90 400,00

250 160 90 153 420RUG160-250-90 455,00

250 200 90 200 420RUG200-250-90 485,00

250 250 110 250 420RUG250-250-110 595,00

ISO-K/CF Adapter, Stainless steel 304L

q For connecting a PVC hose with embedded spring (100SPMxxx)q Fastener: see „Hose Clamp“


ISO-K Flange with PVC Hose Adapter

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 50 70 76,1 320ASP063 65,00

100 50 95 101,6 320ASP100 100,00

A

B C

Aluminum EN AW-6082

ISO-K Flange with Sleeve Couplingq For connecting a CR sleeve (330SMA)q Fastener: see „Hose Clamp“

A

ØB

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 51 76 310FMA063 115,00

100 56 108 310FMA100 200,00

160 56 159 310FMA160 250,00

ISO-K

Catalog 2010 159

Components


Stainless Steel: Flange 304/1.4301; Adapter 316L/1.4404; for Metric Tubing

Stainless Steel: Flange 304/1.4301; Adapter 316L/1.4404; for Imperial (Inch) Tubing

ISO-K Swagelok® Adapterq Original Swagelok® fittingq Pressure range: 2.5 bar to 10-7 mbar* (elastomer seal); 2.5 bar to 10-9 mbar* (metal seal)q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

Flange Size [DN]

Tube OD [mm]

A [mm]

Item No. Price €

63 8mm 42 320ASW063-8 65,00

63 10mm 44 320ASW063-10 75,00

63 12mm 46 320ASW063-12 82,00

63 16mm 49 320ASW063-16 90,00

100 8mm 42 320ASW100-8 70,00

100 10mm 44 320ASW100-10 80,00

100 12mm 46 320ASW100-12 88,00

100 16mm 49 320ASW100-16 95,00

Flange Size [DN]

Tube OD [mm]

A [mm]

Item No. Price €

63 1/4“ 41 320ASW063-0250 70,00

63 3/8“ 43 320ASW063-0375 70,00

63 1/2“ 49 320ASW063-0500 80,00

63 3/4“ 51 320ASW063-0750 115,00

63 1“ 62 320ASW063-1000 140,00

100 1/4“ 41 320ASW100-0250 75,00

100 3/8“ 43 320ASW100-0375 75,00

100 1/2“ 49 320ASW100-0500 88,00

100 3/4“ 51 320ASW100-0750 120,00

100 1“ 62 320ASW100-1000 145,00

A

Mild steel

ISO-K Hose Clampq Temperature range: -50 to 150°Cq 2 pieces per pkg.

A-B

Flange Size [DN]

A = Max. Ø [mm]

Item No. Price €

63 90 70 350SSS063 5,00

100 130 110 350SSS100 10,00

160 175 160 350SSS160 15,00

ISO-K

160 Catalog 2010

Components




ISO-K VCR Adapter, Female

ISO-K VCR Adapter, Male

Flange Size [DN]


Item No. Price €

63 1/4“ 43 320AVF063-0250 78,00

63 1/2“ 46 320AVF063-0500 90,00

63 3/4“ 52 320AVF063-0750 140,00

63 1“ 59 320AVF063-1000 160,00

100 1/4“ 43 320AVF100-0250 85,00

100 1/2“ 46 320AVF100-0500 98,00

100 3/4“ 52 320AVF100-0750 145,00

100 1“ 59 320AVF100-1000 185,00

Flange Size [DN]


Item No. Price €

63 1/4“ 43 320AVM063-0250 78,00

63 1/2“ 46 320AVM063-0500 90,00

63 3/4“ 52 320AVM063-0750 140,00

63 1“ 59 320AVM063-1000 182,00

100 1/4“ 43 320AVM100-0250 85,00

100 1/2“ 46 320AVM100-0500 98,00

100 3/4“ 52 320AVM100-0750 145,00

100 1“ 59 320AVM100-1000 185,00

A

A

q Original Swagelok® VCR adapterq Pressure range: 2.5 bar to 10-7 mbar* (elastomer seal); 2.5 bar to 10-9 mbar* (metal seal)q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

q Original Swagelok® VCR adapterq Pressure range: 2.5 bar to 10-7 mbar* (elastomer seal); 2.5 bar to 10-9 mbar* (metal seal)q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

ISO-K

Catalog 2010 161

Components




ISO-K Spacer Flange with Portq Port size: DN 16 KFq For installation between two ISO-K or ISO-F flanges

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 95 70 6 100 320FDP063-1-16 175,00

100 130 102 6 116 320FDP100-1-16 245,00

Ø A

Ø C

ØB

D

E

ISO-K Stainless Steel Pipe

A = OD [mm]

ID [mm]

B = Wall Thickness [mm]

Item No. Price €

76,1 70,1 3 320RRO063 85,00

88,9 82,9 3 320RRO080 100,00

108 102 3 320RRO100 115,00

159 153 3 320RRO160 160,00

219 213 3 320RRO200 200,00

273 267 3 320RRO250 300,00

BØ A

q Surface: Untreatedq Glass bead blasted upon requestq Tolerances D3/T3 in acc. w/ EN ISO 1127: Outer diameter: ± 0.75% with min. ± 0.3 mm; Wall thickness: ± 10% with min. ± 0.2 mmq Price: Per meter q Lengths up to 6 m (236 in) availableq Minimum order: 1 m (3.28 ft); orders > 1 m calculated pro rata

ISO-K

162 Catalog 2010

Components


Flange Size [DN]

Pieces per Unit Item No. Price €

63 1 330FSK063-S1 0,85

63 5 330FSK063-S5 3,50

80 1 330FSK080-S1 1,00

80 5 330FSK080-S5 4,50

100 1 330FSK100-S1 1,00

100 5 330FSK100-S5 4,50

160 1 330FSK160-S1 1,10

160 5 330FSK160-S5 5,00

200 1 330FSK200-S1 7,00

200 5 330FSK200-S5 30,00

250 1 330FSK250-S1 12,00

250 5 330FSK250-S5 50,00

Polyethelene (PE)

ISO-K Flange Caps

ISO-F Fixed Flange Components

ISO-F


Contents

ISO-F Fastening Elements

ISO-F Screw Sets.........................................................168

ISO-F Seals

ISO-K Centering Ring w/o Outer Ring .........................169

ISO-K Centering Ring w/ Outer Ring ...........................171

ISO-K Centering Ring with Screen ..............................174

ISO-K O-Rings .............................................................175

ISO-K Metal Seal, Aligned at Inner Diameter ..............178

ISO-F Components

ISO-F Blank Flange .....................................................179

ISO-F Weld Flange ......................................................179

ISO-F Weld Flange with Weld Lip ...............................180

ISO-K Rotatable Bolt Ring ...........................................180

Screw Set for ISO-F Rotatable Bolt Ring .....................181

ISO-K/ISO-F Adapter Flange ........................................181

ISO-F Half Nipple ........................................................182

ISO-F Elbow, Mitered ..................................................182

ISO-F Tee ....................................................................183

ISO-F Door ................................................................183

ISO-F Measurement Flange ........................................184

ISO-K Cube .................................................................184

ISO-F


ISO-F Fasteners and Components

ISO-F components from Trinos Vakuum-Systeme GmbH are manu-factured in accordance with DIN 28404 and ISO 1609 in standard sizes DN 63 to DN 1000 and are compatible with products from other prominent manufacturers. All components are helium leak-tested and have leakage rates of better than 10-9 mbar × l/s.


The ISO-F (fixed flange) connection comprises two symmetrical flanges and an o-ring that is positioned and supported by an in-ner centering ring. The seal is additionally supported by an outer ring, especially in connection with larger nominal diameters. The contact pressure required for sealing is produced by means of bolts and nuts (Figure 1). The fixed flange has a fixed bolt circle pattern that is a function of nominal diameter. The flanges can be aligned about the main axis in minimum increments of one bolt hole.

An ISO-F flange can be bolted to a base plate. The seal can consist either of a centering ring (Figure 2) or an o-ring in the base plate’s sealing groove (Figure 3). The dimensions of the holes in the base plate follow from Table 1 below, “Major Dimensions of ISO-F Com-ponents.” The fixed flange can be aligned relative to the base plate in minimum increments of one bolt hole.

An ISO-F flange can be mounted to an ISO-K flange by means of claw clamps (Figure 4) or with the aid of a collar flange (Figure 5). It is installed by pushing the collar flange over the ISO-K flange and then placing a circlip in the outer peripheral groove in the ISO-K flange. In both versions, the flanges can be aligned about the main axis as desired.

1

2

3

4

Figure 1: ISO-F flange connection with bolts and nuts

Figure 2: ISO-F flange bolted to base plate, with centering ring

Figure 3: ISO-F flange bolted to base plate, with o-ring groove

Figure 4: ISO-F flange with claw clamps mounted on ISO-K flange

ISO-F


ISO-F connections are suitable for pressures of up to 10-7 mbar and can also be employed for overpressures of up to 1.5 bar. The pres-sure range can be increased to 10-9 mbar by means of aluminum-metal seal rings. Metallic seals require significantly higher contact pressures. This is why the bolts should be at least Strength Class 8.8, or A2-70 in the case of stainless steel bolts. The maximum possible application temperature will essentially be governed by the seal material in question. You will find information about this subject in the product descriptions and in the chapter entitled “Ma-terials.”

The majority of ISO-F components consist of stainless steel. You will find information about our stainless steels and other alternative materials for vacuum components in the chapter entitled “Mate-rials.”

Special cleaning methods incorporating automated industrial equipment assure smooth surfaces for components that have low outgassing rates (desorption). Welded components are glass bead-blasted or chemically etched. We can offer you alternative surface treatments such as grinding, electropolishing or annealing upOn Req..

5

Figure 5: ISO-F flange bolted to ISO-K with collar flange

Nominal diameter DN 63F 80F 100F 160F 200F 250F 320F 400F 500F 630F 800F*** 1000F***

Outside diameter A [mm] 130 145 165 225 285 335 425 510 610 750 920 1120

A [inch] 5.12 5.71 6.50 8.86 11.22 13.19 16.73 20.08 24.02 29.53 36.22 44.09

Flange height B [mm] 12 12 12 16 16 16 20 20 20 24 24 24

Centering ring nose C [mm] 70 83 102 153 213 261 318 400 501 651 800 1000

Bolt hole circle [mm] 110 125 145 200 260 310 395 480 580 720 890 1090

Bolt holes, quantity x dia. [mm]

4 × 9

8 × 9

8 × 9

8 × 11

12 × 11

12 × 11

12 × 13,5

16 × 13,5

16 × 13,5

20 × 13,5

24 × 13,5

32 × 13,5

BoltsM8 ×

40M8 ×

40M8 ×

40M10 ×

50M10 ×

50M10 ×

50M12 ×

65M12 ×

65M12 ×

65M12 ×

70M12 ×

70M12 ×

70

Sealing area dia. [mm] 95 110 130 180 240 290 370 450 550 690 860 1090

Typical pipe dimension* D × E [mm] 76,1 × 3 88,9 × 3 108 × 3 159 × 3 219 × 3 273 × 3 324 × 3 406 × 3 508 × 4 660 × 5 812 × 6 1016 × 8

Typical inside dia.** F [mm] 70 93 102 153 213 261 318 400 500 650 800 1000

Major Dimensions of ISO-F Components

E

ØA

B

ØC

ØD

ØF

* You will find further pipe dimensions in connection with the “Welding Flange Ring” and “Flange socket” products, in particular.** The minimum inside diameter will be determined by the combination of flange, pipe and centering ring. Moreover, welds and manufacturing variances from the nominal size could locally restrict the clear diameter.

Ø G

Ø H

I

ISO-F






q The flange connections and components have been developed in order to achieve vacuum-tight connections. They can only assu-me mechanical loads to a limited extent. In designing a vacuum system, it will therefore be necessary to review whether it will be necessary for static or dynamic loads to be assumed by additio-nal elements, e.g. holders.

ISO-F

168 Catalog 2010

Fastening Elements





Flange Size [DN]

A [mm]

B Thread

Pkg. [Qty.]

Item No. Price €

63-100 40 M8 8 550BSC100 10,00

160-250 50 M10 12 550BSC250 20,00

320-500 65 M12 16 550BSC500 22,00

630 70 M12 20 550BSC630 25,00

Flange Size [DN]

A [mm]

B Thread

Pkg. [Qty.]

Item No. Price €

63-100 40 M8 8 520BSC100 9,60

160-250 50 M10 12 520BSC250 16,00

320-500 65 M12 16 520BSC500 36,00

630 70 M12 20 520BSC630 46,00

A

B

ISO-F

Catalog 2010 169

Seals


Aluminum EN AW-6061

Ø BØ A

C

E

D

ISO-K Centering Ring w/o Outer RingTemperature ranges:q FPM, FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 312ZRG063 13,50

80 FPM 83 81 3,9 8 5,33 312ZRG080 17,00

100 FPM 102 100 3,9 8 5,33 312ZRG100 17,00

160 FPM 153 151 3,9 8 5,33 312ZRG160 26,00

200 FPM 213 211 3,9 8 5,33 312ZRG200 40,00

250 FPM 261 259 3,9 8 5,33 312ZRG250 44,00

320 FPM 318 313 5,6 14 7 312ZRG320 80,00

63 NBR 70 68 3,9 8 5,33 311ZRG063 14,50

80 NBR 83 81 3,9 8 5,33 311ZRG080 16,50

100 NBR 102 100 3,9 8 5,33 311ZRG100 19,00

160 NBR 153 151 3,9 8 5,33 311ZRG160 22,50

200 NBR 213 211 3,9 8 5,33 311ZRG200 28,00

250 NBR 261 259 3,9 8 5,33 311ZRG250 36,00

320 NBR 318 313 5,6 14 7 311ZRG320 72,00

63 CR 70 68 3,9 8 5,33 316ZRG063 14,50

80 CR 83 81 3,9 8 5,33 316ZRG080 19,00

100 CR 102 100 3,9 8 5,33 316ZRG100 19,00

160 CR 153 151 3,9 8 5,33 316ZRG160 22,50

200 CR 213 211 3,9 8 5,33 316ZRG200 28,00

250 CR 261 259 3,9 8 5,33 316ZRG250 36,00

320 CR 318 313 5,6 14 7 316ZRG320 72,00

63 EPDM 70 68 3,9 8 5,33 314ZRG063 14,50

80 EPDM 83 81 3,9 8 5,33 314ZRG080 19,00

100 EPDM 102 100 3,9 8 5,33 314ZRG100 19,00

160 EPDM 153 151 3,9 8 5,33 314ZRG160 22,50

200 EPDM 213 211 3,9 8 5,33 314ZRG200 28,00

250 EPDM 261 259 3,9 8 5,33 314ZRG250 36,00

320 EPDM 318 313 5,6 14 7 314ZRG320 72,00

63 Silikon 70 68 3,9 8 5,33 313ZRG063 15,00

80 Silikon 83 81 3,9 8 5,33 313ZRG080 21,00

100 Silikon 102 100 3,9 8 5,33 313ZRG100 21,00

160 Silikon 153 151 3,9 8 5,33 313ZRG160 30,00

200 Silikon 213 211 3,9 8 5,33 313ZRG200 43,00

250 Silikon 261 259 3,9 8 5,33 313ZRG250 47,00

320 Silikon 318 313 5,6 14 7 313ZRG320 85,00

ISO-F

170 Catalog 2010

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 322ZRG063 21,00

80 FPM 83 81 3,9 8 5,33 322ZRG080 28,00

100 FPM 102 100 3,9 8 5,33 322ZRG100 28,00

160 FPM 153 151 3,9 8 5,33 322ZRG160 43,00

200 FPM 213 211 3,9 8 5,33 322ZRG200 60,00

250 FPM 261 259 3,9 8 5,33 322ZRG250 70,00

320 FPM 318 313 5,6 14 7 322ZRG320 169,00

63 NBR 70 68 3,9 8 5,33 321ZRG063 21,00

100 NBR 102 100 3,9 8 5,33 321ZRG100 24,00

160 NBR 153 151 3,9 8 5,33 321ZRG160 40,00

200 NBR 213 211 3,9 8 5,33 321ZRG200 55,00

250 NBR 261 259 3,9 8 5,33 321ZRG250 65,00

320 NBR 318 313 5,6 14 7 321ZRG320 153,00

63 CR 70 68 3,9 8 5,33 326ZRG063 21,00

80 CR 83 81 3,9 8 5,33 326ZRG080 24,00

100 CR 102 100 3,9 8 5,33 326ZRG100 24,00

160 CR 153 151 3,9 8 5,33 326ZRG160 40,00

200 CR 213 211 3,9 5,33 8 326ZRG200 62,00

250 CR 261 259 3,9 8 5,33 326ZRG250 70,00

320 CR 318 313 5,6 14 7 326ZRG320 168,00

63 EPDM 70 68 3,9 8 5,33 324ZRG063 21,00

80 EPDM 83 81 3,9 8 5,33 324ZRG080 24,00

100 EPDM 102 100 3,9 8 5,33 324ZRG100 24,00

160 EPDM 153 151 3,9 8 5,33 324ZRG160 40,00

200 EPDM 213 211 3,9 8 5,33 324ZRG200 62,00

250 EPDM 261 259 3,9 8 5,33 324ZRG250 70,00

320 EPDM 318 313 5,6 14 7 324ZRG320 168,00

63 Silikon 70 68 3,9 8 5,33 323ZRG063 21,00

80 Silikon 83 81 3,9 8 5,33 323ZRG080 27,00

100 Silikon 102 100 3,9 8 5,33 323ZRG100 27,00

160 Silikon 153 151 3,9 8 5,33 323ZRG160 42,00

200 Silikon 213 211 3,9 8 5,33 323ZRG200 63,00

250 Silikon 261 259 3,9 8 5,33 323ZRG250 69,00

320 Silikon 318 313 5,6 14 7 323ZRG320 195,00

ISO-K Centering Ring w/o Outer Ring Stainless Steel 316Ti/1.4571 (DN 320: 304/1.4301)

ISO-F

Catalog 2010 171

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 312ZRA063 16,50

80 FPM 83 81 3,9 8 5,33 312ZRA080 22,50

100 FPM 102 100 3,9 8 5,33 312ZRA100 22,50

160 FPM 153 151 3,9 8 5,33 312ZRA160 34,00

200 FPM 213 211 3,9 8 5,33 312ZRA200 44,00

250 FPM 261 259 3,9 8 5,33 312ZRA250 50,00

320 FPM 318 313 5,6 14 7 312ZRA320 90,00

400 FPM 400 395 5,6 14 7 312ZRA400 120,00

500 FPM 501 496 5,6 14 7 312ZRA500 140,00

630 FPM 651 646 5,6 14 7 312ZRA630 170,00

800 FPM 800 795 5,6 14 7 312ZRA800 460,00

1000 FPM 1000 995 5,6 14 7 312ZRA1000 740,00

63 NBR 70 68 3,9 8 5,33 311ZRA063 14,50

80 NBR 83 81 3,9 8 5,33 311ZRA080 19,00

100 NBR 102 100 3,9 8 5,33 311ZRA100 19,00

160 NBR 153 151 3,9 8 5,33 311ZRA160 22,50

200 NBR 213 211 3,9 8 5,33 311ZRA200 32,00

250 NBR 261 259 3,9 8 5,33 311ZRA250 42,00

320 NBR 318 313 5,6 14 7 311ZRA320 82,00

400 NBR 400 395 5,6 14 7 311ZRA400 115,00

500 NBR 501 496 5,6 14 7 311ZRA500 132,00

630 NBR 651 646 5,6 14 7 311ZRA630 160,00

800 NBR 800 795 5,6 14 7 311ZRA800 460,00

1000 NBR 1000 995 5,6 14 7 311ZRA1000 740,00

63 CR 70 68 3,9 8 5,33 316ZRA063 14,50

80 CR 83 81 3,9 8 5,33 316ZRA080 19,00

100 CR 102 100 3,9 8 5,33 316ZRA100 19,00

160 CR 153 151 3,9 8 5,33 316ZRA160 34,00

200 CR 213 211 3,9 8 5,33 316ZRA200 40,00

250 CR 261 259 3,9 8 5,33 316ZRA250 50,00

320 CR 318 313 5,6 14 7 316ZRA320 85,00

400 CR 400 395 5,6 14 7 316ZRA400 115,00

500 CR 501 496 5,6 14 7 316ZRA500 132,00

630 CR 651 646 5,6 14 7 316ZRA630 160,00

800 CR 800 795 5,6 14 7 316ZRA800 455,00

1000 CR 1000 995 5,6 14 7 316ZRA1000 730,00

Aluminum EN AW-6061

E D

Ø A

Ø B

C

ISO-K Centering Ring w/ Outer Ringq Aluminum outer ringTemperature ranges:q FPM/FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-F

172 Catalog 2010

Seals


ISO-K Centering Ring w/ Outer Ring, Aluminum EN AW-6061Flange Size

[DN]O-Ring

MaterialA

[mm]B

[mm]C

[mm]D

[mm]E


63 EPDM 70 68 3,9 8 5,33 314ZRA063 14,50

80 EPDM 83 81 3,9 8 5,33 314ZRA080 19,00

100 EPDM 102 100 3,9 8 5,33 314ZRA100 19,00

160 EPDM 153 151 3,9 8 5,33 314ZRA160 22,50

200 EPDM 213 211 3,9 8 5,33 314ZRA200 32,00

250 EPDM 261 259 3,9 8 5,33 314ZRA250 42,00

320 EPDM 318 313 5,6 14 7 314ZRA320 82,00

400 EPDM 400 395 5,6 14 7 314ZRA400 115,00

500 EPDM 501 496 5,6 14 7 314ZRA500 132,00

630 EPDM 651 646 5,6 14 7 314ZRA630 160,00

800 EPDM 800 795 5,6 14 7 314ZRA800 460,00

1000 EPDM 1000 995 5,6 14 7 314ZRA1000 740,00

63 Silikon 70 68 3,9 8 5,33 313ZRA063 30,00

80 Silikon 83 81 3,9 8 5,33 313ZRA080 30,00

100 Silikon 102 100 3,9 8 5,33 313ZRA100 36,00

160 Silikon 153 151 3,9 8 5,33 313ZRA160 45,00

200 Silikon 213 211 3,9 8 5,33 313ZRA200 47,00

250 Silikon 261 259 3,9 8 5,33 313ZRA250 53,00

320 Silikon 318 313 5,6 14 7 313ZRA320 93,00

400 Silikon 400 395 5,6 14 7 313ZRA400 128,00

500 Silikon 501 496 5,6 14 7 313ZRA500 148,00

Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 FPM 70 68 3,9 8 5,33 322ZRA063 25,00

80 FPM 83 81 3,9 8 5,33 322ZRA080 28,00

100 FPM 102 100 3,9 8 5,33 322ZRA100 28,00

160 FPM 153 151 3,9 8 5,33 322ZRA160 48,00

200 FPM 213 211 3,9 8 5,33 322ZRA200 70,00

250 FPM 261 259 3,9 8 5,33 322ZRA250 80,00

320 FPM 318 313 5,6 14 7 322ZRA320 195,00

63 NBR 70 68 3,9 8 5,33 321ZRA063 23,00

80 NBR 83 81 3,9 8 5,33 321ZRA080 23,50

100 NBR 102 100 3,9 8 5,33 321ZRA100 26,00

160 NBR 153 151 3,9 8 5,33 321ZRA160 45,00

200 NBR 213 211 3,9 8 5,33 321ZRA200 66,00

250 NBR 261 259 3,9 8 5,33 321ZRA250 74,00

320 NBR 318 313 3,9 14 7 321ZRA320 185,00

SS 316Ti/1.4571 (DN 320: 304/1.4301) Outer Ring: Alu. EN AW-6060

ISO-F

Catalog 2010 173

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]


63 CR 70 68 3,9 8 5,33 326ZRA063 23,00

80 CR 83 81 3,9 8 5,33 326ZRA080 26,00

100 CR 102 100 3,9 8 5,33 326ZRA100 26,00

160 CR 153 151 3,9 8 5,33 326ZRA160 45,00

200 CR 213 211 3,9 8 5,33 326ZRA200 66,00

250 CR 261 259 3,9 8 5,33 326ZRA250 74,00

320 CR 318 313 5,6 14 7 326ZRA320 168,00

63 EPDM 70 68 3,9 8 5,33 324ZRA063 23,00

80 EPDM 83 81 3,9 8 5,33 324ZRA080 26,00

100 EPDM 102 100 3,9 8 5,33 324ZRA100 26,00

160 EPDM 153 151 3,9 8 5,33 324ZRA160 45,00

200 EPDM 213 211 3,9 8 5,33 324ZRA200 66,00

250 EPDM 261 259 3,9 8 5,33 324ZRA250 74,00

320 EPDM 318 313 5,6 14 7 324ZRA320 195,00

63 Silikon 70 68 3,9 8 5,33 323ZRA063 23,00

80 Silikon 83 81 3,9 8 5,33 323ZRA080 26,00

100 Silikon 102 100 3,9 8 5,33 323ZRA100 26,00

160 Silikon 153 151 3,9 8 5,33 323ZRA160 45,00

200 Silikon 213 211 3,9 8 5,33 323ZRA200 66,00

250 Silikon 261 259 3,9 8 5,33 323ZRA250 74,00

320 Silikon 318 313 5,6 14 7 323ZRA320 195,00

ISO-K Centering Ring w/ Outer Ring, SS 316Ti/1.4571 (DN 320: 304/1.4301) Outer Ring: Alu. EN AW-6060

ISO-F

174 Catalog 2010

Seals


Flange Size [DN]

O-Ring Material

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Mesh Opening

[mm]

Wire Thick. [mm]

Item No. Price €

63 FPM 70 60 3,9 5,33 8 0,5 0,2 322ZRD063 55,00

80 FPM 83 73 3,9 5,33 8 0,6 0,2 322ZRD080 70,00

100 FPM 102 92 3,9 5,33 8 0,8 0,2 322ZRD100 90,00

160 FPM 153 143 3,9 5,33 8 1,2 0,2 322ZRD160 225,00

63 NBR 70 60 3,9 5,33 8 0,5 0,2 321ZRD063 55,00

80 NBR 83 73 3,9 5,33 8 0,6 0,2 321ZRD080 70,00

100 NBR 102 92 3,9 5,33 8 0,8 0,2 321ZRD100 90,00

160 NBR 153 143 3,9 5,33 8 1,2 0,2 321ZRD160 215,00

63 CR 70 60 3,9 5,33 8 0,5 0,2 326ZRD063 55,00

80 CR 83 73 3,9 5,33 8 0,6 0,2 326ZRD080 70,00

100 CR 102 92 3,9 5,33 8 0,8 0,2 326ZRD100 90,00

160 CR 153 143 3,9 5,33 8 1,2 0,2 326ZRD160 225,00

63 EPDM 70 60 3,9 5,33 8 0,5 0,2 324ZRD063 55,00

80 EPDM 83 73 3,9 5,33 8 0,6 0,2 324ZRD080 70,00

100 EPDM 102 92 3,9 5,33 8 0,8 0,2 324ZRD100 90,00

160 EPDM 153 143 3,9 5,33 8 1,2 0,2 324ZRD160 225,00

63 Silikon 70 60 3,9 5,33 8 0,5 0,2 323ZRD063 55,00

80 Silikon 83 73 3,9 5,33 8 0,6 0,2 323ZRD080 70,00

100 Silikon 102 92 3,9 5,33 8 0,8 0,2 323ZRD100 90,00

160 Silikon 153 143 3,9 5,33 8 1,2 0,2 323ZRD160 225,00

C

Ø BØ A

D

E


ISO-K Centering Ring with ScreenTemperature ranges:q FPM/FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

ISO-F

Catalog 2010 175

Seals


ISO-K O-RingsTemperature ranges:q FPM/FKM: -15 to 200 °Cq NBR: -25 to 120 °Cq CR: -5 to 120 °Cq EPDM: -50 to 130 °Cq Silicone (VMQ): -55 to 200 °C

NBRFlange Size

[DN]A

[mm]B

[mm]Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 301DOR063-S1 1,55

63 76 5,33 5 301DOR063-S5 6,00

80 88,27 5,33 1 301DOR080-S1 4,50

80 88,27 5,33 5 301DOR080-S5 20,00

100 107 5,33 1 301DOR100-S1 2,20

100 107 5,33 5 301DOR100-S5 8,50

160 158 5,33 1 301DOR160-S1 3,15

160 158 5,33 5 301DOR160-S5 12,00

200 209 5,33 1 301DOR200-S1 4,70

200 209 5,33 5 301DOR200-S5 18,00

250 253 5,33 1 301DOR250-S1 5,75

250 253 5,33 5 301DOR250-S5 22,00

Ø A

B

FPM/FKMFlange Size

[DN]A

[mm]B

[mm]Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 302DOR063-S1 3,90

63 76 5,33 5 302DOR063-S5 15,00

80 88,27 5,33 1 302DOR080-S1 6,50

80 88,27 5,33 5 302DOR080-S5 20,00

100 107 5,33 1 302DOR100-S1 5,20

100 107 5,33 5 302DOR100-S5 20,00

160 158 5,33 1 302DOR160-S1 10,40

160 158 5,33 5 302DOR160-S5 40,00

200 209 5,33 1 302DOR200-S1 15,60

200 209 5,33 5 302DOR200-S5 60,00

250 253 5,33 1 302DOR250-S1 20,80

250 253 5,33 5 302DOR250-S5 80,00

320 330 7 1 302DOR320-S1 39,00

320 330 7 5 302DOR320-S5 150,00

400 405 7 1 302DOR400-S1 52,00

500 507 7 1 302DOR500-S1 65,00

630 659 7 1 302DOR630-S1 104,00

800 808 7 1 302DOR800-S1 169,00

1000 1003 7 1 302DOR1000-S1 234,00

ISO-F

176 Catalog 2010

Seals


Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 304DOR063-S1 1,80

63 76 5,33 5 304DOR063-S5 8,00

80 88,27 5,33 1 304DOR080-S1 2,00

80 88,27 5,33 5 304DOR080-S5 10,00

100 107 5,33 1 304DOR100-S1 6,50

100 107 5,33 5 304DOR100-S5 32,50

160 158 5,33 1 304DOR160-S1 8,50

160 158 5,33 5 304DOR160-S5 42,50

EPDM

CR

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 306DOR063-S1 1,80

63 76 5,33 5 306DOR063-S5 8,00

80 88,27 5,33 1 306DOR080-S1 2,00

80 88,27 5,33 5 306DOR080-S5 10,00

100 107 5,33 1 306DOR100-S1 6,50

100 107 5,33 5 306DOR100-S5 32,50

160 158 5,33 1 306DOR160-S1 8,50

160 158 5,33 5 306DOR160-S5 42,50

200 209 5,33 1 306DOR200-S1 6,00

200 209 5,33 5 306DOR200-S5 30,00

250 253 5,33 1 306DOR250-S1 8,00

250 253 5,33 5 306DOR250-S5 40,00

320 330 7 1 306DOR320-S1 15,00

320 330 7 5 306DOR320-S5 75,00

400 405 7 1 306DOR400-S1 35,00

500 507 7 1 306DOR500-S1 45,00

630 659 7 1 306DOR630-S1 80,00

800 808 7 1 306DOR800-S1 140,00

1000 1003 7 1 306DOR1000-S1 195,00

ISO-K O-Rings, NBR

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

320 330 7 1 301DOR320-S1 14,00

320 330 7 5 301DOR320-S5 56,00

400 405 7 1 301DOR400-S1 19,00

500 507 7 1 301DOR500-S1 24,00

630 659 7 1 301DOR630-S1 50,00

800 808 7 1 301DOR800-S1 115,00

1000 1003 7 1 301DOR1000-S1 155,00

ISO-F

Catalog 2010 177

Seals


ISO-K O-Rings, CR

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

63 76 5,33 1 303DOR063-S1 5,00

63 76 5,33 5 303DOR063-S5 20,00

80 88,27 5,33 1 303DOR080-S1 8,00

80 88,27 5,33 5 303DOR080-S5 32,00

100 107 5,33 1 303DOR100-S1 8,00

100 107 5,33 5 303DOR100-S5 32,00

160 158 5,33 1 303DOR160-S1 12,00

160 158 5,33 5 303DOR160-S5 48,00

200 209 5,33 1 303DOR200-S1 16,00

200 209 5,33 5 303DOR200-S5 64,00

250 253 5,33 1 303DOR250-S1 20,00

250 253 5,33 5 303DOR250-S5 80,00

320 330 7 1 303DOR320-S1 32,00

320 330 7 5 303DOR320-S5 128,00

400 405 7 1 303DOR400-S1 52,00

500 507 7 1 303DOR500-S1 64,00

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

200 209 5,33 1 304DOR200-S1 6,00

200 209 5,33 5 304DOR200-S5 30,00

250 253 5,33 1 304DOR250-S1 8,00

250 253 5.33 5 304DOR250-S5 40,00

320 330 7 1 304DOR320-S1 15,00

320 330 7 5 304DOR320-S5 75,00

400 405 7 1 304DOR400-S1 35,00

500 507 7 1 304DOR500-S1 45,00

630 659 7 1 304DOR630-S1 80,00

800 808 7 1 304DOR800-S1 140,00

1000 1003 7 1 304DOR1000-S1 195,00

Silicone

ISO-F

178 Catalog 2010

Seals


Aluminum EN AW-6082

ISO-K Metal Seal, Aligned at Inner Diameterq For single use onlyq For stainless steel flangesq Temperature range: -196 to 150 °Cq No gas permeation

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 77 70 4,6 7 310ZSK063-I 39,00

80 90 83 4,6 7 310ZSK080-I 43,00

100 109 102 4,6 7 310ZSK100-I 46,00

160 160 153 4,6 7 310ZSK160-I 74,00

200 220 213 4,6 7 310ZSK200-I 94,00

250 268 261 4,6 7 310ZSK250-I 145,00

Ø B

D

Ø A

C

ISO-F

Catalog 2010 179

Components


Stainless Steel 304/1.4301 Ø A

Ø B

C

D

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 130 110 12 9 520FBL063 85,00

80 145 125 12 9 520FBL080 115,00

100 165 145 12 9 520FBL100 135,00

160 225 200 16 11 520FBL160 185,00

200 285 260 16 11 520FBL200 235,00

250 335 310 16 11 520FBL250 335,00

320 425 395 20 13,5 520FBL320 620,00

400 510 480 20 13,5 520FBL400 860,00

500 610 580 20 13,5 520FBL500 1320,00

630 750 720 24 13,5 520FBL630 2420,00


ISO-F Weld Flangeq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*

q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*

q Temperature range: -196 to 300 °C (304/1.4301)q Other flange sizes available upon requestq Other flange materials available upon request*Please observe limits for seal materials and fastening elements

Ø A

Ø BC

ISO-F Blank Flangeq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °Cq Other flange materials available upon requestq Other flange sizes available upon request*Please observe limits for seal materials and fastening elements

Flange Size [DN]

OD x Wall [mm]

Tube OD [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 76,1 x 3 3.00“ 76,4 70 12 520FAN063-76 85,00

80 88,9 x 3 3.50“ 89,2 83 12 520FAN080-88 115,00

100 108 x 3 4.25“ 108,3 102 12 520FAN100-108 135,00

160 159 x 3 - 159,3 153 16 520FAN160-159 185,00

200 219 x 3 - 219,4 213 16 520FAN200-219 235,00

250 273 x 3 10.75“ 273,4 261 16 520FAN250-273 335,00

320 324 x 3 12.75“ 324,4 318 20 520FAN320-324 620,00

400 406 x 3 16.00“ 406,5 400 20 520FAN400-406 860,00

500 508 x 4 20.00“ 508,5 501 20 520FAN500-508 1320,00

630 660 x 5 26.00“ 660,5 651 24 520FAN630-660 1825,00

ISO-F

180 Catalog 2010

Components



ISO-F Weld Flange with Weld Lip

Ø A

C

Ø B

q Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*


q Temperature range: -196 to 300 °Cq Other flange materials available upon requestq Other flange sizes available upon request*Please observe limits for seal materials and fastening elements

Flange Size [DN]

OD x Wall [mm]

Tube OD [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 76,1 x 3 3.00“ 76,4 70 12 520FAN063-76-S 90,00

80 88,9 x 3 3.50“ 89,2 83 12 520FAN080-88-S 120,00

100 108 x 3 4.25“ 108,3 102 12 520FAN100-108-S 142,00

160 159 x 3 - 159,3 153 16 520FAN160-159-S 195,00

200 219 x 3 - 219,4 213 16 520FAN200-219-S 245,00

250 273 x 3 10.75“ 273,4 261 16 520FAN250-273-S 350,00

320 324 x 3 12.75“ 324,4 318 20 520FAN320-324-S 640,00

400 406 x 3 16.00“ 406,5 400 20 520FAN400-406-S 755,00

500 508 x 4 20.00“ 508,5 501 20 520FAN500-508-S 1350,00

630 660 x 5 26.00“ 660,5 651 24 520FAN630-660-S 1865,00


Nickel- or chrome-plated Steel S235JR/1.0038

ISO-K Rotatable Bolt RingThe rotatable bolt ring lets you convert an ISO-K flange into a rotatable ISO-F flange.q Fasteners: Set of screws or single claw clamps for ISO-K/ISO-F connectionsq Circlip includedStainless Steellq Temperature range: -196 to 300 °CNickel- or chrome-plated Steelq Temperature range: 0 to 150 °C

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 130 110 12 9 95,5 320FLU063 48,00

80 145 125 12 9 110,5 320FLU080 75,00

100 165 145 12 9 130,5 320FLU100 85,00

160 225 200 16 11 180,7 320FLU160 145,00

200 285 260 16 11 240,7 320FLU200 225,00

250 335 310 16 11 290,7 320FLU250 250,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 130 110 12 9 95,5 350FLU063 36,00

100 165 145 12 9 130,5 350FLU100 53,00

160 225 200 16 11 180,7 350FLU160 92,00

200 285 260 16 11 240,7 350FLU200 125,00

250 335 310 16 11 290,7 350FLU250 160,00

Ø A

Ø E

Ø BC

D

ISO-F

Catalog 2010 181

Components


ISO-K Rotatable Bolt Ring Nickel- or chrome-plated Steel S235JR/1.0038


Screw Set for ISO-F Rotatable Bolt Ringq for connecting two ISO-F flanges or for connecting an ISO-K bolt ring with an ISO-F flangeq suitable for use with metal and elastomer sealsq Temperature range: nickel-plated steel 0 to 150°C; stainless steel: -196 bis 300°Cq Hexagon head screws, each with two washers and one nut

Flange Size [DN]

A [mm]

B Thread

Pkg. [Qty.]

Item No. Price €

63-100 40 M8 8 550BSC100 10,00

160-250 50 M10 12 550BSC250 20,00

320-500 65 M12 16 550BSC500 22,00

630 70 M12 20 550BSC630 25,00


[DN]A

[mm]B

ThreadPkg. [Qty.]

Item No. Price €

63-100 40 M8 8 520BSC100 9,60

160-250 50 M10 12 520BSC250 16,00

320-500 65 M12 16 520BSC500 36,00

630 70 M12 20 520BSC630 46,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

320 425 395 20 13,5 370,8 350FLU320 320,00

400 510 480 20 13,5 450,8 350FLU400 495,00

500 610 580 20 13,5 550,8 350FLU500 710,00

630 750 720 24 13,5 691,0 350FLU630 1250,00


ISO-K/ISO-F Adapter Flange

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [Thread]

Item No. Price €

160 63 180 130 22 70 110 M8 320FLR160-063 195,00

160 100 180 165 22 102 145 M8 320FLR160-100 215,00

200 100 240 165 20 102 145 M8 320FLR200-100 270,00

200 160 240 225 26 153 200 M10 320FLR200-160 285,00

250 160 290 225 22 153 200 M10 320FLR250-160 485,00

A

D

E

B

C

F

q Other flange sizes and dimensions available upon requestq Reduced nominal width implemented with ISO-F blind hole threadsq Stainless steelq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*q Pressure range: 2.5 bar to 10-9 mbar (metal seal)*Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*

A

B

ISO-F

182 Catalog 2010

Components



ISO-F Elbow, Mitered

A

AØ B

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 88 70 520RWS063 340,00

80 98 83 520RWS080 460,00

100 108 102 520RWS100 540,00

160 138 153 520RWS160 740,00

200 178 213 520RWS200 940,00

250 208 268 520RWS250 1740,00





ISO-F Half Nipple

A

C

ØB




Flange Size [DN]

OD x Wall [mm]

Tube OD [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 76,1 x 3 3.00“ 100 76,1 3 520FRA063-76-100 115,00

80 88,9 x 3 3.50“ 100 88,9 3 520FRA080-88-100 155,00

100 108 x 3 - 100 108 3 520FRA100-108-100 175,00

160 159 x 3 - 100 159 3 520FRA160-159-100 255,00

200 219 x 3 - 100 219 3 520FRA200-219-100 335,00

250 273 x 3 - 100 273 3 520FRA250-273-100 435,00

Stainless Steel 304/1.4301, Stainless Steel 316L/1.4404Flange Size

[DN]Reduced

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [Thread]

Item No. Price €

160 63 180 130 22 70 110 M8 370FLR160-063 300,00

160 100 180 165 22 102 145 M8 370FLR160-100 306,00

200 100 240 165 20 102 145 M8 370FLR200-100 395,00

200 160 240 225 26 153 200 M10 370FLR200-160 415,00

250 160 290 225 22 153 200 M10 370FLR250-160 715,00

ISO-F

Catalog 2010 183

Components



ISO-F Door q Material: 304/1.4301 stainless steelq Pressure range: 1 bar to 10-7 mbar*

q Temperature range: -15 to 150 °Cq Item. no. suffix -G: Viewport made of borosilicateq Door seal: FPMq Glass seal: FPM*Please observe limits for seal materials and screws

Ø A

Flange Size [DN]

A [mm]

Item No. Price €

63 70 520KTU063-G 900,00

100 102 520KTU100-G 1000,00

160 153 520KTU160-G 1200,00

200 153 520KTU200-G 1700,00

Stainless Steel

ISO-F Tee

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 176 88 70 520RTS063 510,00

80 196 98 83 520RTS080 690,00

100 216 108 102 520RTS100 810,00

160 276 138 153 520RTS160 1110,00

200 356 178 213 520RTS200 1410,00

250 416 208 268 520RTS250 2010,00

A

B

ØC




ISO-F

184 Catalog 2010

Components


Aluminum EN AW-6060


ISO-F Measurement Flangeq Pressure range: 2.5 bar to 10-7 mbar (elastomer seal)*

q Pressure range: 2.5 bar to 10-9 mbar (metal seal)**

q Temperature range: -196°C to 300 °C (304/1.4301 SS); -196 to 150 °C (aluminum)*

q Other flange materials available upon requestq DN 16 KF port on one side for attaching measurement device*Please observe limits for seal materials and screws**Do not use metal seal with aluminum flange

B

C

D

EA

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

100 40 165 8xM8 12 75 510FMS100 105,00

160 30 225 8xM10 12 107 510FMS160 130,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

63 30 130 4xM8 12 55 520FMS063 175,00

100 40 165 8xM8 12 75 520FMS100 295,00

160 30 225 8xM10 12 107 520FMS160 300,00


ISO-K Cubeq Up to DN 100: Manufactured from forged cubeq DN 160 and larger: Manufactured from welded platesq ISO-K flange installation: Use claw clamps (BPR), or use screws in combination with a rotatable bolt ring (FLU)

Flange Size [DN]

A [mm]

B [mm]

Bolt Circle [Ø]

Bore Holes Item No. Price €

63 130 70 110 M8 (4 x 90°) 370RKK063 2000,00

100 165 102 145 M8 (8 x 45°) 370RKK100 3000,00

160 225 153 200 M10 (8 x 45°) 370RKK160 5100,00

200 285 213 260 M10 (12 x 30°) 370RKK200 7600,00

A

B

Ø LK

Schraubflanschbauteile CF/UHVCF UHV-Flange Components

CF


Contents

CF Fastening Elements

CF Hexagon Head Screw Set for Flanges with Through-holes ....................................................189

CF Hexagon Head Screw Set for Flanges with Tapped Holes ......................................................189

CF Hexagon Head Screw Set for Spacer Flanges.........190

CF Plate Nut Sets ........................................................190

CF Stud Screw Set with Hexagon Nut .........................191

CF Hexagon Head Screw Set with Horseshoe Nuts ....191

Thread Lubricant ........................................................192

CF Spacer Flange with Bore Holes and Ports, 316LN ESR .................................................................216

CF Reducer Flange ......................................................217

CF Reducer Flange, 316LN ESR ...................................218

CF Full Nipple .............................................................219

CF Full Nipple, 316LN ESR ..........................................220

CF 90° Elbow, Mitered ...............................................221

CF 90° Elbow, Mitered, 316LN ESR ............................222

CF Tee ........................................................................223

CF Tee, 316LN ESR .....................................................224

CF Reducer Tee ...........................................................225

CF 4-Way Cross ..........................................................226

CF Cross, 316LN ESR ..................................................227

CF 4-Way Reducer Cross ............................................228

CF 5-Way Cross ..........................................................229

CF 6-Way Cross ..........................................................229

CF 6-Way Reducer Cross ............................................230

CF Reducer Nipple, Straight ........................................231

CF Reducer Nipple, Straight, 316LN ESR .....................232

ISO-KF/CF Adapter .....................................................233

ISO-K/CF Adapter .......................................................234

CF-Swagelok® Adapter ...............................................235

CF-VCR Adapter, Male and Female ............................236

CF Door ......................................................................237

CF Cube ......................................................................238

CF Pipe .......................................................................239

CF Flange Cap ...........................................................239

CF Gaskets

CF Copper Gasket ......................................................193

CF Silver-plated Copper Gasket ..................................193

CF Vacuum-annealed Copper Gasket .........................194

CF Silver-plated, Vacuum-annealed Copper Gasket ....194

CF Flat Elastomer Gasket ............................................195

CF Teflon Gasket ........................................................195

CF Components

CF Blank Flange, Fixed ................................................196

CF Blank Flange, Fixed, 316LN ESR .............................197

CF Blank Flange, Rotatable .........................................198

CF Blank Flange, Rotatable, 316LN ESR ......................199

CF Blank Flange, Fixed, Aluminum ..............................200

CF Weld Flange, Fixed ................................................201

CF Weld Flange, Fixed, 316LN ESR .............................203

CF Weld Flange, Rotatable .........................................204

CF Weld Flange, Rotatable, 316LN ESR ......................206

CF Weld-On Flange ....................................................207

CF Weld-On Flange, 316LN ESR .................................207

CF Half Nipple, Fixed, Aluminum ................................208

CF Half Nipple, Fixed ..................................................209

CF Half Nipple, Fixed, 316LN ESR ...............................210

CF Half Nipple, Rotatable ...........................................212

CF Spacer Flange ........................................................213

CF Spacer Flange, 316LN ESR .....................................214

CF Spacer Flange with Bore Holes ..............................214

CF Spacer Flange with Bore Holes, 316LN ESR ...........215

CF Spacer Flange with Bore Holes and Port(s) ............215

CF


CF Fasteners and Components

The term ultra high vacuum (UHV) denotes the pressure range below 10-7 mbar. In order to achieve and maintain these kinds of low pressures, the outgassing rate (desorption) of the entire equipment has to be extremely low. This can only be achieved through the use of UHV-suitable materials and by baking out the entire equipment. If the ultimate pressure of the vacuum pump being used is sufficiently low, the ultimate pressure of the vacu-um system will be governed essentially by the desorption rates of the interior surfaces.

Components from TRINOS are welded from the inside, as is good practice for vacuum applications, or full-penetration welded if necessitated by the geometry in order to avoid virtual leaks, such as gaps and blind holes. Together with suitable materials and clean surfaces provided by special cleaning methods that incor-porate industrial automation, this assures components with low desorption rates. The standard process is to glass bead-blast or chemically etch welded components. We also offer you alterna-tive surface treatment methods upon request, such as grinding, electropolishing or annealing. All components are helium leak tested and possess leak rates of better than 10-10 mbar × l/s

We manufacture the majority of CF (ConFlat®) components from stainless steel, which offers corrosion protection in connection with bakeout and possesses sufficient flange connection strength. We use low-carbon 304L stainless steel as standard. To produce the lowest ultimate pressures and low permeabilities, we also offer components made from 1.4429 ESU (316LN ESR) premi-um stainless steel. On the one hand, flanges of 1.4429 ESU are harder and can be annealed to 1050°C under vacuum (cleaning annealing, low-hydrogen annealing or demagnetization anne-aling). On the other hand, the electroslag remelting (ESR) process affords greater chemical and structural cleanliness, and thus a lower desorption rate. Further information on our stainless steels and alternative materials for vacuum components can be found in the chapter entitled “Materials.”

CF flanges from TRINOS satisfy technical specification ISO 3669 and are manufactured in sizes ranging from DN16 to DN400. Although there is no standard for the CF flange profile, our CF flanges can be mated with those from nearly all manufacturers.

Standard components can be shipped within 24 hours; special components can be fabricated to customer speci-fications.

A CF connection comprises two symmetrical flanges with knife edges that are bolted together. A radial groove on the flange serves to loosen the flange connection, on the one hand, while aiding in leak detection, on the other, as the helium can be spray-ed directly onto the sealing surface. In addition to fixed flanges, which must always be aligned on the basis of the hole pattern, flanges are also available in the form of rotatable collar flan-ges, enabling the flange to be aligned as desired along the main axis.

Gaskets of OFHC (Oxygen Free High Conductivity) copper are nor-mally employed for sealing purposes. When being assembled, the flange’s knife edges are pressed into the enclosed gasket. Extru-sion occurs at the outer knife-edge flanks, while cutting occurs at the inner flanks. This cold extrusion is limited by the external vertical flange walls, creating very high pressures in the barrier. Under this high pressure, the copper adapts to the microstruc-ture of the knife-edge flanks and fills small surface defects, thus producing a metallic connection that is ultra high vacuum-tight. What is important in connection with assembly is that the bolts initially be tightened uniformly and diametrically (cross-hatched) in order to avoid any distortion. The bolts should then be gradu-ally tightened to the recommended torque one after another in multiple passes. The OFHC copper gasket is not re-usable. Silver-plated copper gaskets are employed to avoid oxidation of the copper in the air at bakeout temperatures of over 200°C. Gaskets of FPM can also be used for pressures of up to around 10-7 mbar. They can be employed multiple times and afford significantly fas-ter assembly by comparison with metallic gaskets.

1

Fig. 1: CF flange connection section

CF


In connection with bakeout, it should be noted that both bakeout and cool-down should be performed uniformly and not too quickly. Temperature differences at the flange connection with result in stresses that could damage components (e.g. glass elements) or produce leaks. Temperature gradients must therefore be avoided, especially in connection with larger nominal diameters.

Nominal diameterOutside diameter

16CF 1 1/3”

25CF 2 1/8”

40CF 2 ¾”

50CF 3 3/8”

63CF 4 ½”

75CF 4 5/8”

100CF 6”

130CF 6 ¾”

160CF 8”

200CF 10”

250CF 12”

300CF 14”

350CF 16.5”

400CF 18”

Outside diameter A [mm]

34,0 54,0 69,9 85,7 113,5 117,4 152,0 171,4 202,4 253,2 304,8 355,6 419,1 457,0

Flange height B [mm]

7,75 12,0 12,7 17,3 17,5 17,5 19,8 21,4 22,2 24,5 26,0 28.5 28.5 28.5

Typical pipe dimension* C×D [mm]

18×1 28×2 40×1,550,8× 1,65

70×2 76,1×2 108×2127× 1,65

159×2205× 2,5

256×3 306×3 356×3 406×3

Typical inside dia.** E [mm]

16 24 37 47,5 63,9 72 101,7 123,7 152,5 200 250 300 350 400

Bolt hole pattern F [mm]

27 41,3 58,7 72,4 92,1 102,3 130,3 151,6 181 231,8 284 325,4 388,9 431,8

Bolt hole dia. G [mm]

4,4 6,6 6,6 8,4 8,4 8,4 8,4 8,4 8,4 8,4 8,4 10,5 10,5 10,5

Bolts, metric6× M4

4× M6

6× M6

8× M8

8× M8

10× M8

16× M8

18× M8

20× M8

24× M8

32× M8

30× M10

36× M10

36× M10

Bolts, inch6×

8-324×

¼-286×

¼-288×

5/16-248×

5/16-2410×

5/16-2416×

5/16-2418×

5/16-2420×

5/16-2424×

5/16-2432×

5/16-2430×

3/8-2436×

3/8-2436×

3/8-24

D

ØC

G

ØA

B

ØE

ØF

* Further pipe dimensions can be found in connection with the “weld flange ring” and “flange with pipe socket” products** The minimum inside diameter is governed by the combination of flange, pipe and gasket. In addition, welds and manufacturing variances from the nominal size can locally reduce the clear diameter.


q The pressures indicated the following product descriptions are absolute pressures, at an ambient pressure of 1000 mbar..

q The minimum achievable ultimate pressure in the entire system will be governed by a number of factors, in particular by the pump system, the desorption rates of the interior surfaces and the pump-down time. The minimum pressures indicated in the product descriptions are based upon experience as to what can be achieved in a well designed vacuum system. Actual pressures could be higher or lower in individual cases. If elastomer gas-kets are employed, it will additionally be necessary to take gas permeation into consideration. It will be a function of the ma-terial, temperature and type of gas in question. Typical ultimate pressures of the elastomers can be found in the chapter entitled “Materials.”


q The flange connections and components were developed in or-der to achieve vacuum-tight connections. They can only assume only limited mechanical loads. In designing a vacuum system, it is therefore necessary to review whether static or dynamic loads will have to be assumed by additional elements, such as hol-ders.

CF

Catalog 2010 189

Fastening Elements


A

B

A

B

Stainless Steel A2

Stainless Steel A2-70

CF Hexagon Head Screw Set for Flanges with Through-holes

CF Hexagon Head Screw Set for Flanges with Tapped Holes

q For installing two flanges with through-holesq Set includes the screws required for the specified flange sizeq Includes two washers and one nut for each screw

q For installing a flange with through-holes on a flange with tapped holesq Ideal for installing gate valvesq Set includes the screws required for the specified flange sizeq One screw and one washer

Flange Size [DN]

A [mm]

B = Thread Sets per Pkg. Item No. Price €

16 20 M4 6 420BSC016-20 3,30

25 35 M6 4 420BSC025-35 4,00

40 35 M6 6 420BSC040-35 4,20

50 45 M8 8 420BSC050-45 6,40

63 45 M8 8 420BSC063-45 6,40

75 45 M8 10 420BSC075-45 8,00

100 50 M8 16 420BSC100-50 12,80

130 55 M8 18 420BSC130-55 15,50

160 55 M8 20 420BSC160-55 17,00

200 60 M8 24 420BSC200-60 21,60

250 65 M8 32 420BSC250-65 32,00

300 70 M10 30 420BSC300-70 47,00

350 70 M10 36 420BSC350-70 56,00

400 70 M10 36 420BSC400-70 56,00

Flange Size [DN]

A [mm]


16 14 M4 6 420BSC016-14 3,30

40 20 M6 6 420BSC040-20 4,20

63 30 M8 8 420BSC063-30 6,50

100 30 M8 16 420BSC100-30 12,80

160 35 M8 20 420BSC160-35 17,00

200 35 M8 24 420BSC200-35 21,60

250 35 M8 32 420BSC250-35 32,00

CF

190 Catalog 2010

Fastening Elements


A

Bq For installing a spacer between two standard flanges with through-holesq Set includes the screws required for the specified flange sizeq Includes two washers and one nut for each screw

q Set includes screws and washers for the specified flange sizeq Easy assembly with only one wrench (no counter-tightening necessary)


CF Hexagon Head Screw Set for Spacer Flanges

Flange Size [DN]

A [mm]


16 30 M4 6 420BSC016-30 3,30

40 50 M6 6 420BSC040-50 4,20

63 65 M8 8 420BSC063-65 8,00

100 70 M8 16 420BSC100-70 16,50

160 80 M8 20 420BSC160-80 24,50

200 90 M8 24 420BSC200-90 35,00

250 90 M8 32 420BSC250-90 47,00

A

B

C

BStainless Steel 304; Screws: A2-70

CF Plate Nut Sets

Flange Size [DN]

A [mm]

B = Threads C [mm]

Sets per Pkg. Item No. Price €

16 13,5 M4 20 3 420BMD016 6,00

40 29,3 M6 35 3 420BMD040 8,00

63 35,2 M8 45 4 420BMD063 19,00

100 25,4 M8 50 8 420BMD100 32,00

160 28,3 M8 55 10 420BMD160 40,00

Per flange size, one screw set incl. plate nut available individually

CF

Catalog 2010 191

Fastening Elements


A

C

D BStainless Steel A2

CF Stud Screw Set with Hexagon Nutq 10 sets per packageq Includes washer and one nut for each screw

q For installing two flanges with through-holesq Easy assembly with only one wrench (no counter-tightening necessary)q Set contains two horseshoe nut plates with screws and washers

Flange Size [DN]

A [Thread]

B [mm]

C [mm]

D [mm]

Item No. Price €

25-40 M6 25 18 6 420BST-M6x25 12,00

25-40 M6 30 18 6 420BST-M6x30 12,00

25-40 M6 35 18 6 420BST-M6x35 12,00

63-250 M8 40 22 8 420BST-M8x40 15,50

63-250 M8 45 22 8 420BST-M8x45 16,50

63-250 M8 50 22 8 420BST-M8x50 19,00

63-250 M8 55 22 8 420BST-M8x55 20,50

63-250 M8 60 22 8 420BST-M8x60 22,00

Stainless Steel 304/1.4301; Screws: A2-70

CF Hexagon Head Screw Set with Horseshoe Nuts

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D = Threads E [mm]

Item No. Price €

16 34 20 6 M4 20 420BMH016 28,00

40 69,6 45 9 M6 35 420BMH040 38,00

63 113,5 80 12 M8 45 420BMH063 52,00

100 151,6 115 12 M8 50 420BMH100 60,00

160 202,4 165 12 M8 55 420BMH160 90,00

D

ØA

ØB

C

E

D

CF

192 Catalog 2010

Fastening Elements


Thread Lubricantq Prevents seizing of threads at high temperatures or high torqueq Permits easy disassembly even after prolonged high temperature useq Friction coefficient comparable to that of oiled screwsq Temparature range: -30°C to 650 °Cq Contains solid lubricant, mineral oil, thickener and powdered metalq Recommended for uncoated stainless steel screws in heated flangesNot for use in vacuum

Product Tube Size [g]

Temperature Range [°C]

Item No. Price €

Thread Lubricant, MOLYKOTE® 1000 100g < 650°C YFG-100 19,00

CF

Catalog 2010 193

Gaskets


Oxygen free high conductance (OFHC) copper

OFHC Copper (Oxygen Free), Silver-plated

CF Copper Gasket

CF Silver-plated Copper Gasket

q Temperature range: -196 to 200 °Cq Pressure range: 1 bar to 10-13 mbarq For single use only

q Temperature range: -196 to 450 °Cq Pressure range: 1 bar to 10-13 mbarq For single use only

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,3 16 10 490DFL016-S10 12,00

25 32,8 25,6 10 490DFL025-S10 30,00

40 48,1 36,7 10 490DFL040-S10 14,00

50 61,6 50,8 10 490DFL050-S10 28,00

63 82,4 63,6 10 490DFL063-S10 28,00

75 91,4 76,4 10 490DFL075-S10 39,00

100 120,5 101,8 10 490DFL100-S10 39,00

130 141,4 127,2 5 490DFL130-S5 50,00

160 171,3 152,5 5 490DFL160-S5 30,00

200 222,1 203,4 5 490DFL200-S5 40,00

250 272,9 254 5 490DFL250-S5 110,00

300 313,1 300 5 490DFL300-S5 420,00

350 376,6 356,5 5 490DFL350-S5 475,00

400 419,0 407 5 490DFL400-S5 515,00

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,3 16 5 490DFL016-S-S5 11,00

25 32,8 25,6 5 490DFL025-S-S5 50,00

40 48,1 36,7 5 490DFL040-S-S5 14,00

63 82,4 63,6 5 490DFL063-S-S5 28,00

100 120,5 101,8 5 490DFL100-S-S5 34,50

160 171,3 152,5 5 490DFL160-S-S5 48,00

200 222,1 203,4 5 490DFL200-S-S5 79,00

250 272,9 254 5 490DFL250-S-S5 345,00

Ø A

Ø B

Ø A

Ø B

CF

194 Catalog 2010

Gaskets


OFHC Copper (Oxygen Free)

OFHC Copper (Oxygen Free), Silver-plated

CF Vacuum-annealed Copper Gasket

CF Silver-plated, Vacuum-annealed Copper Gasket

q Temperature range: -196 to 200 °Cq Pressure range: 1 bar to 10-13 mbarq Particularly well suited for viewports and aluminum CF flangesq For single use only

q Temperature range: -196 to 450 °Cq Pressure range: 1 bar to 10-13 mbarq Particularly well suited for viewports and aluminum CF flangesq For single use only

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,3 16 5 490DFL016-G-S5 14,50

40 48,1 36,7 5 490DFL040-G-S5 28,00

63 82,4 63,6 5 490DFL063-G-S5 36,00

100 120,5 101,8 5 490DFL100-G-S5 50,00

160 171,3 152,5 5 490DFL160-G-S5 58,00

200 222,1 203,4 5 490DFL200-G-S5 79,00

250 272,9 254 5 490DFL250-G-S5 225,00

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,3 16 5 490DFL016-S-G-S5 22,00

40 48,1 36,7 5 490DFL040-S-G-S5 36,00

63 82,4 63,6 5 490DFL063-S-G-S5 45,00

100 120,5 101,8 5 490DFL100-S-G-S5 60,00

160 171,3 152,5 5 490DFL160-S-G-S5 65,00

200 222,1 203,4 5 490DFL200-S-G-S5 102,00

250 272,9 254 5 490DFL250-S-G-S5 392,00

Ø A

Ø B

Ø A

Ø B

CF

Catalog 2010 195

Gaskets


Ø A

Ø B

FPM

FPM

CF Flat Elastomer Gasketq Temperature range: -15 to 200° Cq Pressure range: 1 bar to 10-7 mbarq Reusableq Version with centering lip: Better fixation in flange for easier assembly; higher purity of materials for lower desorption

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,4 16 2 402DFL016-S2 5,00

40 48,2 37 2 402DFL040-S2 6,50

63 82,4 63 2 402DFL063-S2 10,00

100 120,5 109 2 402DFL100-S2 13,50

160 171,3 152 2 402DFL160-S2 22,00

200 222,1 203 2 402DFL200-S2 40,00

250 272,9 254 2 402DFL250-S2 75,00

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,4 16 1 402DFL016-Z 5,00

40 48,2 36 1 402DFL040-Z 7,00

63 82,4 71 1 402DFL063-Z 12,50

100 120,5 109 1 402DFL100-Z 15,00

160 171,3 158 1 402DFL160-Z 23,00

200 222,1 200 1 402DFL200-Z 40,00

250 273,1 254 1 402DFL250-Z 75,00

Ø A

Ø B

Ø A

Ø B

PTFE

CF Teflon Gasketq Temperature range: -196 to 200 °Cq Pressure range: 1 bar to 10-6 mbarq Recommended for single use only

Flange Size [DN]

A [mm]

B [mm]

Pkg. [Qty.]

Item No. Price €

16 21,3 16 5 405DFL016-S5 55,00

40 48,1 36 5 405DFL040-S5 60,00

63 82,4 63 5 405DFL063-S5 75,00

100 120.5 101 5 405DFL100-S5 90,00

160 171,3 152 5 405DFL160-S5 110,00

200 222,1 203 5 405DFL200-S5 130,00

250 272,9 254 5 405DFL250-S5 175,00

CF

196 Catalog 2010

Components


Stainless Steel 304L

Stainless Steel 304L, with Metric Thread

Stainless Steel 304L, with Imperial (Inch) Thread

CF Blank Flange, Fixedq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 7,75 34 4,4 420FBL016 11,50

25 12 54 6,6 420FBL025 20,00

40 12,7 69,9 6,6 420FBL040 13,00

50 17,3 85,7 8,4 420FBL050 42,50

63 17,5 113,5 8,4 420FBL063 49,50

75 17,5 117,4 8,4 420FBL075 72,50

100 19,8 152 8,4 420FBL100 66,00

130 21,4 171,4 8.4 420FBL130 135,00

160 22,2 202,4 8,4 420FBL160 105,00

200 24,5 253,2 8,4 420FBL200 185,00

250 26 304,8 8,4 420FBL250 335,00

300 28,5 355,6 10,5 420FBL300 745,00

350 28,5 419,1 10,5 420FBL350 847,00

400 28,5 457 10,5 420FBL400 1350,00

Flange Size [DN]

A [mm]

B [mm]

C = Thread Item No. Price €

16 7,6 34 8-32 420FBL016-T 18,00

25 12 54 1/4 - 28 420FBL025-T 34,50

40 13 69,9 1/4 - 28 420FBL040-T 21,00

50 17,3 85,7 5/16 - 24 420FBL050-T 52,00

63 17,5 113,5 5/16 - 24 420FBL063-T 72,00

75 20,5 117,4 5/16 - 24 420FBL075-T 100,00

100 20 151,6 5/16 - 24 420FBL100-T 100,00

130 21,4 171,4 5/16 - 24 420FBL130-T 125,00

Flange Size [DN]

A [mm]

B [mm]


16 7,75 34 M4 420FBL016-G 14,50

40 12,7 69,9 M6 420FBL040-G 20,00

63 17,5 113,5 M8 420FBL063-G 65,00

100 19,8 152 M8 420FBL100-G 89,00

160 22,2 202,4 M8 420FBL160-G 140,00

200 24,5 253,2 M8 420FBL200-G 215,00

250 26 304,8 M8 420FBL250-G 370,00

A

Ø B

C

CF

Catalog 2010 197

Components


CF Blank Flange, Fixed Stainless Steel 304L, with Imperial (Inch) Thread

Stainless Steel 316LN ESR/1.4429

Stainless Steel 316LN ESR/1.4429, with Thread

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 7,75 34 4,4 480FBL016 27,50

25 12 54 6,6 480FBL025 85,00

40 12,7 69,9 6,6 480FBL040 35,00

50 17,3 85,7 8,4 480FBL050 100,00

63 17,5 113,5 8,4 480FBL063 138,00

75 17,5 117,4 8,4 480FBL075 210,00

100 19,8 152 8,4 480FBL100 180,00

130 21,4 171,4 8,4 480FBL130 235,00

160 22,2 202,4 8,4 480FBL160 275,00

200 24,6 253,2 8,4 480FBL200 460,00

250 26 304,8 8,4 480FBL250 810,00

300 28,5 355,6 10,5 480FBL300 1350,00

Flange Size [DN]

A [mm]

B [mm]


16 7,75 34 M4 480FBL016-G 35,00

40 12,7 69,9 M6 480FBL040-G 47,00

63 17,5 113,5 M8 480FBL063-G 150,00

100 19,8 152 M8 480FBL100-G 220,00

160 22,2 202,4 M8 480FBL160-G 325,00

200 24,5 253,2 M8 480FBL200-G 520,00

250 26 304,8 M8 480FBL250-G 890,00

CF Blank Flange, Fixed, 316LN ESRq Material: Forgedq Operating temperature: -196 to 350 °C*q Bakeable up to 450°C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Magnetic permeability: ≤ 1.01q Low desorption*Please observe limits for seal materials and screws A

Ø B

C

Flange Size [DN]

A [mm]

B [mm]


160 22 202,4 5/16 - 24 420FBL160-T 165,00

200 24,5 253,2 5/16 - 24 420FBL200-T 275,00

250 26 304,8 5/16 - 24 420FBL250-T 425,00

CF

198 Catalog 2010

Components



Stainless Steel 304L, with Metric Thread

Stainless Steel 304L, with Imperial (Inch) Thread

CF Blank Flange, Rotatableq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 7,75 5,8 4,4 19,2 420FBD016 17,00

25 12 8 6,6 29,5 420FBD025 25,00

40 12,7 7,6 6,6 42 420FBD040 22,00

50 17,3 9,7 8,4 52 420FBD050 50,00

63 17,5 12,6 8,4 72 420FBD063 65,00

75 17,5 13 8,4 78,7 420FBD075 105,00

100 19,8 14,4 8,4 109 420FBD100 110,00

130 21,4 14,2 8,4 130,3 420FBD130 180,00

160 22,2 15,8 8,4 161 420FBD160 210,00

200 24,5 15,8 8,4 207 420FBD200 290,00

250 26 16,6 8,4 260 420FBD250 440,00

300 28,5 16,6 10,5 307 420FBD300 610,00

350 28,5 16,6 10,5 358 420FBD350 975,00

Flange Size [DN]

A [mm]

B [mm]

C = Thread D [mm]

Item No. Price €

16 7,75 5.8 M4 19,2 420FBD016-G 20,00

25 12 8 M6 29,5 420FBD025-G 32,00

40 12,7 7,6 M6 42 420FBD040-G 24,50

50 17,3 9,7 M8 52 420FBD050-G 68,00

63 17,5 12,6 M8 72 420FBD063-G 76,00

75 17,5 14,4 M8 78,7 420FBD075-G 125,00

100 19,8 14,4 M8 109 420FBD100-G 125,00

130 21,4 14,2 M8 130,3 420FBD130-G 200,00

160 22,2 15,8 M8 161 420FBD160-G 240,00

200 24,5 15,8 M8 207 420FBD200-G 330,00

Flange Size [DN]

A [mm]

B [mm]

C = Thread D [mm]

Item No. Price €

16 7,75 5.8 8-32 19,2 420FBD016-T 22,00

25 12 8 1/4 - 28 29,5 420FBD025-T 37,50

40 12,7 7,6 1/4 - 28 42 420FBD040-T 27,00

50 17,3 9,7 5/16 - 24 52 420FBD050-T 75,00

63 17,5 12,6 5/16 - 24 72 420FBD063-T 80,00

75 17,5 13 5/16 - 24 78,7 420FBD075-T 130,00

Ø D

B A

C

CF

Catalog 2010 199

Components


CF Blank Flange, Rotatable, Stainless Steel 304L, with Imperial (Inch) Thread


Stainless Steel 316LN ESR/1.4429, with Thread

CF Blank Flange, Rotatable, 316LN ESRq Material: Forgedq Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Magnetic permeability: ≤ 1.01q Low desorption*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 7,75 5,8 4,4 19,2 480FBD016 43,00

25 12 8 6,6 29,5 480FBD025 105,00

40 12,7 7,6 6,6 42 480FBD040 52,00

50 17,3 9,7 8,4 52 480FBD050 85,00

63 17,5 12,6 8,4 72 480FBD063 160,00

75 21,4 13 8,4 78,7 480FBD075 144,00

100 19,8 14,4 8,4 109 480FBD100 255,00

130 21,4 14,2 8,4 130,3 480FBD130 270,00

160 22,2 15,8 8,4 161 480FBD160 420,00

200 24,5 15,8 8,4 207 480FBD200 635,00

250 26 16,6 8,4 260 480FBD250 1170,00

Flange Size [DN]

A [mm]

B [mm]

C = Thread D [mm]

Item No. Price €

16 7,75 5,8 M4 19,2 480FBD016-G 50,00

40 12,7 7,6 M6 42 480FBD040-G 65,00

63 17,5 12,6 M8 72 480FBD063-G 180,00

100 19,8 14,4 M8 109 480FBD100-G 295,00

160 22,2 15,8 M8 161 480FBD160-G 470,00

200 24,5 15,8 M8 207 480FBD200-G 695,00

250 26 16,6 M8 260 480FBD250-G 1250,00

Ø D

B A

C

Flange Size [DN]

A [mm]

B [mm]

C = Thread D [mm]

Item No. Price €

100 19,8 14,4 5/16 - 24 109 420FBD100-T 130,00

130 21,4 14,2 5/16 - 24 130,3 420FBD130-T 205,00

160 22,2 15,8 5/16 - 24 161 420FBD160-T 250,00

200 24,5 15,8 5/16 - 24 207 420FBD200-T 330,00

250 26 16,6 5/16 - 24 260 420FBD250-T 500,00

CF

200 Catalog 2010

Components


Aluminium JIS H 4000/A2219

Aluminium JIS H 4000/A2219, with Thread

CF Blank Flange, Fixed, Aluminumq Hardened knife edge (ion-implanted nickel-chromium coated)q Non-magneticq Low desorptionq Temperature range: 20 to 150 °Cq Pressure range: 1 bar to 10-12 mbar**Please observe limits for seal materials and screwsUse annealed copper gaskets or elastomer seals

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 8 34 4,4 410FBL016-CrN 68,00

40 13 70 6,6 410FBL040-CrN 110,00

63 18 114 8,4 410FBL063-CrN 180,00

100 21 152 8,4 410FBL100-CrN 320,00

160 22 203 8,4 410FBL160-CrN 450,00

200 25 253 8,4 410FBL200-CrN 690,00

250 28 305 8,4 410FBL250-CrN 1600,00

Flange Size [DN]

A [mm]

B [mm]


16 8 34 M4 410FBL016-CrN-G 62,00

40 13 70 M6 410FBL040-CrN-G 90,00

63 18 114 M8 410FBL063-CrN-G 130,00

100 21 152 M8 410FBL100-CrN-G 350,00

160 22 203 M8 410FBL160-CrN-G 530,00

200 25 253 M8 410FBL200-CrN-G 720,00

250 28 305 M8 410FBL250-CrN-G 1700,00A

Ø B

C

CF

Catalog 2010 201

Components



CF Weld Flange, Fixedq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 12,7 x 1,24 0.50“ 7,75 10,2 12,85 4,4 420FAN016-12 14,00

16 18 x 1 - 7,75 16,0 18,15 4,4 420FAN016-18 11,50

16 19,05 x 1,65 0.75“ 7,75 15,75 19,2 4,4 420FAN016-19 14,00

16 6,35 x 0,89 0.25“ 7,75 4,6 6,5 4,4 420FAN016-6 14,00

25 19,05 x 1,65 0.75“ 12,0 15,75 19,2 6,6 420FAN025-19 24,00

25 25,4 x 1,65 1.00“ 12,0 22,1 25,6 6,6 420FAN025-25 24,00

25 28 x 2 - 12,0 24,0 28,2 6,6 420FAN025-28 23,00

40 12,7 x 1,24 0.50“ 12,7 10,2 12,85 6,6 420FAN040-12 14,75

40 19,05 x 1,65 0.75“ 12,7 15,75 19,2 6,6 420FAN040-19 14,75

40 25,4 x 1,65 1.00“ 12,7 22,1 25,6 6,6 420FAN040-25 14,75

40 38 x 1,5 1.50“ 12,7 35,0 38,2 6,6 420FAN040-38 14,75

40 40 x 1,5 - 12,7 37,0 40,2 6,6 420FAN040-40 14,75

40 42,4 x 2 - 12,7 38,4 42,6 6,6 420FAN040-42 14,75

40 44,5 x 2 1.75“ 12,7 40,5 44,7 6,6 420FAN040-44 18,00

50 50,8 x 1,65 2.00“ 17,3 47,5 51,1 8,4 420FAN050-50 48,00

63 63,5 x 1,65 2.50“ 17,5 60,2 63,8 8,4 420FAN063-63 55,00

63 70 x 2 - 17,5 66,0 70,3 8,4 420FAN063-70 49,50

75 76,1 x 2 3.00“ 17,5 72,1 76,4 8,4 420FAN075-76 65,00

100 101,6 x 2,1 4.00“ 19,8 97,4 101,9 8,4 420FAN100-101 65,00

100 104 x 2 - 19,8 100,0 104,3 8,4 420FAN100-104 62,00

100 108 x 2 4.25“ 19,8 104,0 108,3 8,4 420FAN100-108 62,00

130 127 x 1,65 5.00“ 21,4 123,7 127,3 8,4 420FAN130-127 105,00

160 152,4 x 2,4 6.00“ 22,2 147,6 152,7 8,4 420FAN160-152 112,00

160 154 x 2 - 22,2 150,0 154,3 8,4 420FAN160-154 112,00

160 159 x 2 - 22,2 155,0 159,3 8,4 420FAN160-159 105,00

200 203,2 x 2,4 8.00“ 24,5 198,4 203,5 8,4 420FAN200-203 165,00

200 204 x 2 - 24,5 200,0 204,3 8,4 420FAN200-204 165,00

200 205 x 2,5 - 24,5 200,0 205,3 8,4 420FAN200-205 165,00

250 254 x 2 10.00“ 26,0 250,0 254,3 8,4 420FAN250-254 312,00

250 256 x 3 - 26,0 250,0 256,3 8,4 420FAN250-256 312,00

300 306 x 3 12.00“ 28,5 300,0 306,3 10,5 420FAN300-306 565,00

350 356 x 3 14.00“ 28,5 350,0 356,3 10,5 420FAN350-356 785,00

400 406 x 3 16.00“ 28,5 400,0 406,3 10,5 420FAN400-406 1100,00

A

Ø B

Ø C

D

CF

202 Catalog 2010

Components


CF Weld Flange, Fixed, Stainless Steel, with Metric Thread

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 12,7 x 1,24 0.50“ 7,75 10,2 12,85 8-32 420FAN016-12-T 15,00

16 19,05 x 1,65 0.75“ 7,75 15,75 19,2 8-32 420FAN016-19-T 17,50

16 6,35 x 0,89 0.25“ 7,75 4,6 6,5 8-32 420FAN016-6-T 15,00

25 19,05 x 1,65 0.75“ 12,0 15,75 19,2 1/4-28 420FAN025-19-T 30,00

25 25,4 x 1,65 1.00“ 12,0 22,1 25,6 1/4-28 420FAN025-25-T 30,00

40 12,7 x 1,24 0.50“ 12,7 10,2 12,85 1/4-28 420FAN040-12-T 35,00

40 19,05 x 1,65 0.75“ 12,7 15,75 19,2 1/4-28 420FAN040-19-T 19,00

40 25,4 x 1,65 1.00“ 12,7 22,1 25,6 1/4-28 420FAN040-25-T 35,00

40 38 x 1,5 1.50“ 12,7 35,0 38,2 1/4-28 420FAN040-38-T 35,00

40 44,5 x 2 1.75“ 12,7 40,5 44,7 1/4-28 420FAN040-44-T 24,00

50 50,8 x 1,65 2.00“ 17,3 47,5 51,1 5/16-24 420FAN050-50-T 62,00

63 63,5 x 1,65 2.50“ 17,5 60,2 63,8 5/16-24 420FAN063-63-T 70,50

75 76,1 x 2 3.00“ 17,5 72,1 76,4 5/16-24 420FAN075-76-T 85,00

100 101,6 x 2,1 4.00“ 19,8 97,4 101,9 5/16-24 420FAN100-101-T 94,00

130 127 x 1,65 5.00“ 21.4 123,7 127,3 5/16-24 420FAN130-127-T 130,00

160 152,4 x 2,4 6.00“ 22,2 147,6 152,7 5/16-24 420FAN160-152-T 149,00

200 203,2 x 2.4 8.00“ 24,5 198,4 203,5 5/16-24 420FAN200-203-T 230,00

250 254 x 2 10.00“ 26,0 250,0 254,3 5/16-24 420FAN250-254-T 355,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 M4 420FAN016-18-G 15,00

25 28 x 2 - 12,0 24,0 28,2 M6 420FAN025-28-G 27,00

40 38 x 1,5 1.50“ 12,7 35,0 38,2 M6 420FAN040-38-G 20,00

40 40 x 1,5 - 12,7 37,0 40,2 M6 420FAN040-40-G 20,00

40 42,4 x 2 - 12,7 38,4 42,6 M6 420FAN040-42-G 20,00

40 44,5 x 2 1.75“ 12,7 40,5 44,7 M6 420FAN040-44-G 24,00

63 70 x 2 - 17,5 66,0 70,3 M8 420FAN063-70-G 65,50

100 104 x 2 - 19,8 100,0 104,3 M8 420FAN100-104-G 105,00

100 108 x 2 4.25“ 19,8 104,0 108,3 M8 420FAN100-108-G 88,50

160 154 x 2 - 22,2 150,0 154,3 M8 420FAN160-154-G 150,00

160 159 x 2 - 22,2 155,0 159,3 M8 420FAN160-159-G 144,00

200 204 x 2 - 24,5 200,0 204,3 M8 420FAN200-204-G 225,00

200 205 x 2,5 - 24,5 200,0 205,3 M8 420FAN200-205-G 225,00

250 254 x 2 10.00“ 26,0 250,0 254,3 M8 420FAN250-254-G 370,00

250 256 x 3 - 26,0 250,0 256,3 M8 420FAN250-256-G 370,00

300 306 x 3 12.00“ 28,5 300,0 306,3 M10 420FAN300-306-G 678,00

Stainless Steel, with Imperial (Inch) Thread

CF

Catalog 2010 203

Components



Stainless Steel 316LN ESR/1.4429, with Metric Thread

CF Weld Flange, Fixed, 316LN ESRq Material: Forgedq Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Magnetic permeability: ≤ 1.01q Low desorption*Please observe limits for seal materials and screws

A

Ø B

Ø C

D

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 4,4 480FAN016-18 30,00

16 19,05 x 1,65 0.75“ 7,75 15,75 19,2 4,4 480FAN016-19 30,00

25 25,4 x 1,65 1.00“ 12,0 22,1 25,6 6,6 480FAN025-25 29,00

40 38 x 1,5 1.50“ 12,7 35,0 38,2 6,6 480FAN040-38 40,00

40 40 x 1,5 - 12,7 37,0 40,2 6,6 480FAN040-40 40,00

63 63,5 x 1,25 2.50“ 17,5 60,2 63,8 8,4 480FAN063-63 135,00

63 70 x 2 - 17,5 66,0 70,3 8,4 480FAN063-70 135,00

100 101,6 x 2,1 4.00“ 19,8 97,4 101,9 8,4 480FAN100-101 185,00

100 104 x 2 - 19,8 100,0 104,3 8,4 480FAN100-104 185,00

160 152,4 x 2,4 6.00“ 22,2 147,6 152,7 8,4 480FAN160-152 280,00

160 154 x 2 - 22,2 150,0 154,3 8,4 480FAN160-154 280,00

200 204 x 2 - 24,5 200,0 204,3 8,4 480FAN200-204 410,00

250 254 x 2 10.00“ 26,0 250,0 254,3 8,4 480FAN250-254 760,00

300 306 x 3 12.00“ 28,5 300,0 306,3 10,5 480FAN300-306 1100,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 M4 480FAN016-18-G 45,00

40 40 x 1,5 - 12,7 37,0 40,2 M6 480FAN040-40-G 63,00

63 70 x 2 - 17,5 66,0 70,3 M8 480FAN063-70-G 175,00

100 104 x 2 - 19,8 100,0 104,3 M8 480FAN100-104-G 260,00

160 154 x 2 - 22,2 150,0 154,3 M8 480FAN160-154-G 375,00

200 204 x 2 - 24,5 200,0 204,3 M8 480FAN200-204-G 535,00

250 254 x 2 10.00“ 26,0 250,0 254,3 M8 480FAN250-254-G 925,00

CF

204 Catalog 2010

Components



Stainless Steel 304L,with Metric Thread

CF Weld Flange, Rotatableq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 M4 420FAD016-18-G 25,00

16 19,05 x 1,65 0.75“ 7,75 15,75 19,2 M4 420FAD016-19-G 25,00

25 28 x 2 - 12,0 24,0 28,2 M6 420FAD025-28-G 35,00

40 38 x 1,5 1.50“ 12,7 35,0 38,2 M6 420FAD040-38-G 27,00

40 40 x 1,5 - 12,7 37,0 40,2 M6 420FAD040-40-G 27,00

40 42,4 x 2 - 12,7 38,4 42,6 M6 420FAD040-42-G 30,00

40 44,5 x 2 1.75“ 12,7 40,5 44,7 M6 420FAD040-44-G 30,00

A

Ø C

Ø B D

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 4,4 420FAD016-18 19,00

16 19,05 x 1,65 0.75“ 7,75 15,75 19,2 4,4 420FAD016-19 20,00

25 25,4 x 1,65 1.00“ 12 22,1 25,6 6,6 420FAD025-25 25,00

25 28 x 2 - 12 24,0 28,2 6,6 420FAD025-28 25,00

40 38 x 1,5 1.50“ 12,7 35,0 38,2 6,6 420FAD040-38 24,00

40 40 x 1,5 - 12,7 37,0 40,2 6,6 420FAD040-40 24,00

40 42,4 x 2 - 12,7 38,4 42,6 6,6 420FAD040-42 24,00

40 44,5 x 2 1.75“ 12,7 40,5 44,7 6,6 420FAD040-44 24,00

50 50,8 x 1,65 2.00“ 17,3 47,5 51,1 8,4 420FAD050-50 54,00

63 63,5 x 1,65 2.50“ 17,5 60,2 63,8 8,4 420FAD063-63 65,50

63 70 x 2 - 17,5 66,0 70,3 8,4 420FAD063-70 62,50

75 76,1 x 2 3.00“ 17,5 72,1 76,4 8,4 420FAD075-76 85,00

100 101,6 x 2,1 4.00“ 19,8 97,4 101,9 8,4 420FAD100-101 105,00

100 104 x 2 - 19,8 100,0 104,3 8,4 420FAD100-104 105,00

100 108 x 2 4.25“ 19,8 104,0 108,3 8,4 420FAD100-108 105,00

130 127 x 1,65 5.00“ 21,4 123,7 127,3 8,4 420FAD130-127 160,00

160 152,4 x 2,4 6.00“ 22,2 147,6 152,7 8,4 420FAD160-152 195,00

160 154 x 2 - 22,2 150,0 154,3 8,4 420FAD160-154 195,00

160 159 x 2 - 22,2 155,0 159,3 8,4 420FAD160-159 195,00

200 203,2 x 2,4 8.00“ 24,5 198,4 203,5 8,4 420FAD200-203 275,00

200 204 x 2 - 24,5 200,0 204,3 8,4 420FAD200-204 275,00

200 205 x 2,5 - 24,5 200,0 205,3 8,4 420FAD200-205 275,00

250 254 x 2 10.00“ 26 250,0 254,3 8,4 420FAD250-254 455,00

250 256 x 3 - 26 250,0 256,3 8,4 420FAD250-256 455,00

300 306 x 3 12.00„ 28,5 300,0 306,3 10,5 420FAD300-306 725,00

350 356 x 3 14.00“ 28,5 350,0 356,3 10,5 420FAD350-356 985,00

CF

Catalog 2010 205

Components


CF Weld Flange, Rotatable, Stainless Steel 304L, with Metric ThreadFlange Size

[DN]OD x Wall

[mm]Tube OD

[in]A

[mm]B

[mm]C

[mm]D =

ThreadItem No. Price €

50 50,8 x 1,65 2.00“ 17,3 47,5 51,1 M8 420FAD050-50-G 65,00

63 63,5 x 1,65 2.50“ 17,5 60,2 63,8 M8 420FAD063-63-G 69,00

63 70 x 2 - 17,5 66,0 70,3 M8 420FAD063-70-G 83,00

75 76,1 x 2 3.00“ 17,5 72,1 76,4 M8 420FAD075-76-G 105,00

100 101,6 x 2,1 4.00“ 19,8 97,4 101,9 M8 420FAD100-101-G 125,00

100 104 x 2 - 19,8 100,0 104.3 M8 420FAD100-104-G 125,00

100 108 x 2 4.25“ 19,8 104,0 108,3 M8 420FAD100-108-G 135,00

130 127 x 1,65 5.00“ 21,4 123,7 127,3 M8 420FAD130-127-G 180,00

160 152,4 x 2,4 6.00“ 22,2 147,6 152,7 M8 420FAD160-152-G 215,00

160 154 x 2 - 22,2 150,0 154,3 M8 420FAD160-154-G 215,00

160 159 x 2 - 22,2 155,0 159,3 M8 420FAD160-159-G 215,00

200 203,2 x 2,4 8.00“ 24,5 198,4 203,5 M8 420FAD200-203-G 305,00

200 204 x 2 - 24,5 200,0 204,3 M8 420FAD200-204-G 305,00

200 205 x 2,5 - 24,5 200,0 205,3 M8 420FAD200-205-G 305,00

250 254 x 2 10.00“ 26,0 250,0 254,3 M8 420FAD250-254-G 520,00

250 256 x 3 - 26,0 250,0 256,3 M8 420FAD250-256-G 520,00

300 306 x 3 12.00“ 28,5 300,0 306,3 M10 420FAD300-306-G 725,00

350 356 x 3 14.00“ 28,5 350,0 356,3 M10 420FAD350-356-G 1050,00

Stainless Steel 304L, with Imperial (Inch) ThreadFlange Size

[DN]OD x Wall

[mm]Tube OD

[in]A

[mm]B

[mm]C

[mm]D =

ThreadItem No. Price €

16 19,05 x 1,65 0.75“ 7,75 15,75 19,2 8-32 420FAD016-19-T 25,00

25 25,4 x 1,65 1.00“ 12,0 22,1 25,6 1/4-28 420FAD025-25-T 38,50

40 38 x 1,5 1.50“ 12,7 35,0 38,2 1/4-28 420FAD040-38-T 30,00

40 44,5 x 2 1.75“ 12,7 40,5 44,7 1/4-28 420FAD040-44-T 30,00

50 50,8 x 1,65 2.00“ 17,3 47,5 51,1 5/16-24 420FAD050-50-T 82,00

63 63,5 x 1,65 2.50„ 17,5 60,2 63,8 5/16-24 420FAD063-63-T 88,00

75 76,1 x 2 3.00“ 17,5 72,1 76,4 5/16-24 420FAD075-76-T 120,00

100 101,6 x 2,1 4.00“ 19,8 97,4 101,9 5/16-24 420FAD100-101-T 135,00

130 127 x 1,65 5.00“ 21,4 123,7 127,3 5/16-24 420FAD130-127-T 195,00

160 154 x 2 - 22,2 150,0 154,3 5/16-24 420FAD160-154-T 205,00

200 203,2 x 2,4 8.00“ 24,5 198,4 203,5 5/16-24 420FAD200-203-T 315,00

250 254 x 2 10.00“ 26,0 250,0 254,3 5/16-24 420FAD250-254-T 540,00

CF

206 Catalog 2010

Components


316LN/1.4429 ESR Stainless Steel

CF Weld Flange, Rotatable, 316LN ESRq Material: Forgedq Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Magnetic permeability: ≤ 1.01q Low desorption*Please observe limits for seal materials and screws

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 4,4 480FAD016-18 33,00

40 38 x 1,5 1.50“ 13 35,0 38,2 6,6 480FAD040-38 50,00

40 40 x 1,5 - 12,7 37,0 40,2 6,6 480FAD040-40 50,00

63 70 x 2 - 17,5 66,0 70,3 8,4 480FAD063-70 140,00

100 101,6 x 2,1 4.00“ 19.8 97,4 101,9 8,4 480FAD100-101 200,00

100 104 x 2 - 19,8 100,0 104,3 8,4 480FAD100-104 200,00

160 154 x 2 - 22,2 150,0 154,3 8,4 480FAD160-154 360,00

200 204 x 2 - 24,5 200,0 204,3 8,4 480FAD200-204 610,00

250 254 x 2 10.00“ 26,0 250,0 254,3 8,4 480FAD250-254 900,00

A

Ø C

Ø B D

316LN/1.4429 ESR Stainless Steel, with Thread

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 7,75 16,0 18,15 M4 480FAD016-18-G 44,00

40 40 x 1,5 - 12,7 37,0 40,2 M6 480FAD040-40-G 60,00

63 70 x 2 - 17,5 66,0 70,3 M8 480FAD063-70-G 165,00

100 104 x 2 - 19,8 100,0 104,3 M8 480FAD100-104-G 280,00

160 154 x 2 - 22,2 150,0 154,3 M8 480FAD160-154-G 450,00

200 204 x 2 - 24,5 200,0 204,3 M8 480FAD200-204-G 700,00

250 254 x 2 10.00“ 26,0 250,0 254,3 M8 480FAD250-254-G 990,00

CF

Catalog 2010 207

Components



CF Weld-On Flange

q Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

A

Ø B

Ø C

D

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D = Thread Item No. Price €

16 16 16 34 M4 420FES016 50,00

40 24 37 69,9 M6 420FES040 60,00

63 24 66 113,5 M8 420FES063 80,00

100 24 102 152 M8 420FES100 140,00

160 24 155 202,4 M8 420FES160 300,00

Flange for welding to a large-radius flat panel or round chamber

CF Weld-On Flange, 316LN ESR

q Material: Forgedq Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Magnetic permeability: ≤ 1.01q Low desorption*Please observe limits for seal materials and screws

A

Ø B

Ø C

D


Flange Size [DN]

A [mm]

B [mm]

C [mm]


16 16 16 34 M4 480FES016 100,00

40 24 37 69,9 M6 480FES040 120,00

63 24 66 113,5 M8 480FES063 160,00

100 24 102 152 M8 480FES100 280,00

160 24 155 202,4 M8 480FES160 600,00

Flange for welding to a large-radius flat panel or round chamber

CF

208 Catalog 2010

Components


Aluminum

Aluminum, with Thread

CF Half Nipple, Fixed, Aluminum

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 20 x 3 - 50 20 3 4,4 410FRA016-50 120,00

40 43 x 3 - 100 43 3 6,6 410FRA040-100 195,00

63 70 x 3 - 100 70 3 8,4 410FRA063-100 325,00

100 110 x 5 - 100 110 5 8,4 410FRA100-100 595,00

160 160 x 5 - 100 160 5 8,4 410FRA160-100 775,00

200 210 x 5 - 65 210 5 8,4 410FRA200-65 800,00

250 262 x 6 - 65 262 6 8,4 410FRA250-65 1750,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]


16 20 x 3 - 50 20 3 M4 410FRA016-50-G 100,00

40 43 x 3 - 100 43 3 M6 410FRA040-100-G 155,00

63 70 x 3 - 100 70 3 M8 410FRA063-100-G 260,00

100 110 x 5 - 100 110 5 M8 410FRA100-100-G 460,00

160 160 x 5 - 100 160 5 M8 410FRA160-100-G 600,00

200 210 x 5 - 65 210 5 M8 410FRA200-65-G 800,00

250 262 x 6 - 65 262 6 M8 410FRA250-65-G 1800,00

q Hardened knife edge (ion-implanted nickel-chromium coated)q Absolutely non-magneticq Low desorptionq Temperature range: 20 to 150 °Cq Pressure range: 1 bar to 10-12 mbar**Please observe limits for seal materials and screwsUse annealed copper gaskets or elastomer seals

A

C

ØB

D

CF

Catalog 2010 209

Components


Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 18 x 1 - 38 18 1 4,4 420FRA016-18-38 26,00

16 19,05 x 1,65 0.75“ 38 19,05 1,65 4,4 420FRA016-19-38 33,00

25 25,4 x 1,65 1.00“ 52 25,4 1,65 6,6 420FRA025-25-52 40,00

40 38 x 1,5 1.50“ 63 38 1,5 6,6 420FRA040-38-63 39,00

40 40 x 1,5 - 38 40 1,5 6,6 420FRA040-40-38 34,00

40 40 x 1,5 - 63 40 1,5 6,6 420FRA040-40-63 34,00

50 50,8 x 1,65 2.00“ 82 50,8 1,65 8,4 420FRA050-50-82 84,00

63 63,5 x 1,65 2.50“ 105 63,5 1,65 8,4 420FRA063-63-105 127,50

63 70 x 2 - 105 70 2 8,4 420FRA063-70-105 86,00

75 76,1 x 2 3.00“ 90 76,1 2 8,4 420FRA075-76-90 153,00

100 101,6 x 2,1 4.00“ 135,0 101,6 2,1 8,4 420FRA100-101-135 120,00

100 108 x 2 - 135 108 2 8,4 420FRA100-108-135 124,00

130 127 x 1,65 5.00“ 110 127 1,65 8,4 420FRA130-127-110 255,00

160 154 x 2 - 167 154 2 8,4 420FRA160-154-167 330,00

160 159 x 2 - 167 159 2 8,4 420FRA160-159-167 235,00

200 203,2 x 2,4 8.00“ 167 203,2 2,4 8,4 420FRA200-203-167 433,50

200 205 x 2,5 - 167 205 2,5 8,4 420FRA200-205-167 375,00

250 254 x 2 10.00“ 167 254 2 8,4 420FRA250-254-167 607,50

250 256 x 3 - 167 256 3 8,4 420FRA250-256-167 490,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 38 18 1 M4 420FRA016-18-38-G 30,00

40 40 x 1,5 - 38 40 1,5 M6 420FRA040-40-38-G 40,00

40 40 x 1,5 - 63 40 1,5 M6 420FRA040-40-63-G 40,00

63 70 x 2 - 105 70 2 M8 420FRA063-70-105-G 99,00

100 108 x 2 - 135 108 2 M8 420FRA100-108-135-G 185,00

160 159 x 2 - 167 159 2 M8 420FRA160-159-167-G 279,00

200 205 x 2,5 - 167 205 2,5 M8 420FRA200-205-167-G 415,00

250 256 x 3 - 167 256 3 M8 420FRA250-256-167-G 675,00

Stainless Steel

Stainless Steel, with Metric Thread

CF Half Nipple, Fixedq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon requestq Other tube dimensions available upon request*Please observe limits for seal materials and screws

A

C

ØB

D

CF

210 Catalog 2010

Components



CF Half Nipple, Fixed, 316LN ESRq Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/s

q Magnetic permeability, flanges: ≤ 1.01q Low desporptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available upon requestq Other tube dimensions available upon request*Please observe limits for seal materials and screws

A

C

ØB

D

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 19,05 x 1,65 0.75“ 38 19,05 1,65 8-32 420FRA016-19-38-T 40,50

25 25,4 x 1,65 1.00“ 52 25,4 1,65 1/4-28 420FRA025-25-52-T 45,00

40 38 x 1,5 1.50“ 63 38 1,5 1/4-28 420FRA040-38-63-T 52,50

50 50,8 x 1,65 2.00“ 82 50,8 1,65 5/16-24 420FRA050-50-82-T 94,50

63 63,5 x 1,65 2.50“ 105 63,5 1,65 5/16-24 420FRA063-63-105-T 142,50

75 76,1 x 2 3.00“ 90 76,1 2 5/16-24 420FRA075-76-90-T 172,50

100 101,6 x 2,1 4.00“ 135 101,6 2,1 5/16-24 420FRA100-101-135-T 135,00

130 127 x 1,65 5.00“ 110 127 1,65 5/16-24 420FRA130-127-110-T 280,50

160 154 x 2 - 167 154 2 5/16-24 420FRA160-154-167-T 351,00

250 254 x 2 10.00“ 167 254 2 5/16-24 420FRA250-254-167-T 606,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 18 x 1 - 38 18 1 4,4 480FRA016-18-38 55,00

16 19,05 x 1,65 0.75“ 38 19,05 1,65 4,4 480FRA016-19-38 55,00

40 38 x 1,5 1.50“ 63 38 1,5 6,6 480FRA040-38-63 90,00

40 40 x 1,5 - 38 40 1,5 6,6 480FRA040-40-38 90,00

40 40 x 1,5 - 63 40 1,5 6,6 480FRA040-40-63 90,00

63 63,5 x 1,65 2.50“ 105 63,5 1,65 8,4 480FRA063-63-105 210,00

63 70 x 2 - 105 70 2 8,4 480FRA063-70-105 210,00

100 101,6 x 2,1 4.00“ 135 101,6 2,1 8,4 480FRA100-101-135 307,00

100 108 x 2 - 135 108 2 8,4 480FRA100-108-135 307,00

160 152,4 x 2,4 6.00“ 167 152,4 2,4 8,4 480FRA160-152-167 480,00

160 154 x 2 - 167 154 2 8,4 480FRA160-154-167 480,00

200 203,2 x 2,4 8.00“ 167 203,2 2,4 8,4 480FRA200-203-167 795,00

200 204 x 2 - 167 204 2 8,4 480FRA200-204-167 795,00

250 254 x 2 10.00“ 167 254 2 8,4 480FRA250-254-167 1145,00

250 256 x 3 10.00“ 167 256 3 8,4 480FRA250-256-167 1145,00

CF Half Nipple, Fixed ,Stainless Steel, with Imperial (Inch) Thread

CF

Catalog 2010 211

Components


Stainless Steel 316LN ESR/1.4429, with Imperial (Inch) Thread

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 38 18 1 M4 480FRA016-18-38-G 63,00

40 40 x 1,5 - 38 40 1,5 M6 480FRA040-40-38-G 97,00

40 40 x 1,5 - 63 40 1,5 M6 480FRA040-40-63-G 97,00

63 70 x 2 - 105 70 2 M8 480FRA063-70-105-G 232,00

100 108 x 2 - 135 108 2 M8 480FRA100-108-135-G 335,00

160 154 x 2 - 167 154 2 M8 480FRA160-154-167-G 540,00

200 204 x 2 - 167 204 2 M8 480FRA200-204-167-G 890,00

250 254 x 2 10.00“ 167 254 2 M8 480FRA250-254-167-G 1395,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 19,05 x 1,65 0.75“ 38 19,05 1,65 8-32 480FRA016-19-38-T 63,00

40 38 x 1,5 1.50“ 63 38 1,5 1/4-28 480FRA040-38-63-T 97,50

63 63,5 x 1,65 2.50“ 105 63,5 1,65 5/16-24 480FRA063-63-105-T 232,00

100 101,6 x 2,1 4.00“ 135 101,6 2,1 5/16-24 480FRA100-101-135-T 338,00

160 154 x 2 6.00“ 167 154 2 5/16-24 480FRA160-154-167-T 540,00

250 254 x 2 10.00“ 167 254 2 5/16-24 480FRA250-254-167-T 1280,00

CF Half Nipple, Fixed, 316LN ESR, Stainless Steel 316LN ESR/1.4429, with Metric Thread

CF

212 Catalog 2010

Components


Stainless Steel

Stainless Steel, with Metric Thread

CF Half Nipple, Rotatableq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon requestq Other tube diameters available upon requeste*Please observe limits for seal materials and screws

A

ØB

CD

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 18 x 1 - 38 18 1 4,4 420FRD016-18-38 40,00

16 19,05 x 1,65 0.75“ 13 19,05 1,65 4,4 420FRD016-19-13 37,50

16 19,05 x 1,65 0.75“ 38 19,05 1,65 4,4 420FRD016-19-38 37,50

25 25,4 x 1,65 1.00“ 52 25,4 1,65 6,6 420FRD025-25-52 45,00

40 38 x 1,5 1.50“ 38 38 1,5 6,6 420FRD040-38-38 43,00

40 38 x 1,5 1.50“ 63 38 1,5 6,6 420FRD040-38-63 43,00

40 40 x 1,5 - 38 40 1,5 6,6 420FRD040-40-38 43,00

40 40 x 1,5 - 63 40 1,5 6,6 420FRD040-40-63 43,00

40 42,4 x 2 - 63 42,4 2 6,6 420FRD040-42-63 43,00

40 44,5 x 2 1.75“ 63 44,5 2 6,6 420FRD040-44-63 43,00

50 50,8 x 1,65 2.00“ 82 50,8 1,65 8,4 420FRD050-50-82 98,00

63 63,5 x 1,65 2.50“ 105 63,5 1,65 8,4 420FRD063-63-105 142,50

63 70 x 2 - 105 70 2 8,4 420FRD063-70-105 105,00

75 76,1 x 2 3.00“ 90 76,1 2 8,4 420FRD075-76-90 180,00

100 101,6 x 2,1 4.00“ 135 101,6 2,1 8,4 420FRD100-101-135 198,00

100 104 x 2 - 135 104 2 8,4 420FRD100-104-135 150,00

100 108 x 2 - 135 108 2 8,4 420FRD100-108-135 150,00

130 127 x 1,65 5.00“ 110 127 1,65 8,4 420FRD130-127-110 300,00

160 152,4 x 2,4 6.00“ 167 152,4 2,4 8,4 420FRD160-152-167 352,50

160 154 x 2 - 167 154 2 8,4 420FRD160-154-167 352,50

160 159 x 2 - 167 159 2 8,4 420FRD160-159-167 275,00

200 205 x 2,5 - 167 205 2,5 8,4 420FRD200-205-167 405,00

250 256 x 3 - 167 256 3 8,4 420FRD250-256-167 555,00

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 18 x 1 - 38 18 1 M4 420FRD016-18-38-G 43,00

40 38 x 1,5 1.50“ 38 38 1,5 M6 420FRD040-38-38-G 50,00

40 38 x 1,5 1.50“ 63 38 1,5 M6 420FRD040-38-63-G 50,00

40 40 x 1,5 - 38 40 1,5 M6 420FRD040-40-38-G 50,00

40 40 x 1,5 - 63 40 1,5 M6 420FRD040-40-63-G 50,00

63 70 x 2 - 105 70 2 M8 420FRD063-70-105-G 119,00

100 104 x 2 - 135 104 2 M8 420FRD100-104-135-G 165,00

CF

Catalog 2010 213

Components


Stainless Steel,with Imperial (Inch) Thread


CF Spacer Flangeq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 7,75 34 4,4 420FDB016 25,00

40 12,7 69,9 6,6 420FDB040 35,00

63 17,5 113,5 8,4 420FDB063 102,00

100 19,8 152 8,4 420FDB100 150,00

160 22,2 202,4 8,4 420FDB160 190,00

200 24,5 253,2 8,4 420FDB200 285,00

250 26 304,8 8,4 420FDB250 415,00

CF Half Nipple, Rotatable, Stainless Steel, with Metric Thread

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

16 19,05 x 1,65 0.75“ 12,7 19,05 1,65 8-32 420FRD016-19-13-T 45,00

16 19,05 x 1,65 0.75“ 38 19,05 1,65 8-32 420FRD016-19-38-T 45,00

25 25,4 x 1,65 1.00“ 52 25,4 1,65 1/4-28 420FRD025-25-52-T 60,00

40 38 x 1,5 1.50“ 63 38 1,5 1/4-28 420FRD040-38-63-T 52,50

40 44,5 x 2 1.75“ 63 44,5 2 1/4-28 420FRD040-44-63-T 52,00

50 50,8 x 1,65 2.00“ 82 50,8 1,65 5/16-24 420FRD050-50-82-T 113,00

63 63,5 x 1,65 2.50“ 105 63,5 1,65 5/16-24 420FRD063-63-105-T 150,00

75 76,1x 2 3.00“ 90 76,1 2 5/16-24 420FRD075-76-90-T 195,00

100 101,6 x 2,1 4.00“ 135 101,6 2,1 5/16-24 420FRD100-101-135-T 225,00

130 127 x 1,65 5.00“ 110 127 1,65 5/16-24 420FRD130-127-110-T 300,00

160 152,4 x 2,4 6.00“ 167 152,4 2,4 5/16-24 420FRD160-152-167-T 352,50

Flange Size [DN]

OD x Wall [mm]

Tube OD [in]

A [mm]

B [mm]

C [mm]

D = Thread

Item No. Price €

100 108 x 2 - 135 108 2 M8 420FRD100-108-135-G 175,00

160 159 x 2 - 167 159 2 M8 420FRD160-159-167-G 315,00

200 205 x 2,5 - 167 205 2,5 M8 420FRD200-205-167-G 455,00

250 256 x 3 - 167 256 3 M8 420FRD250-256-167-G 585,00

A

Ø B

C

CF

214 Catalog 2010

Components


1.4429, 316LN ESR stainless steel

CF Spacer Flange, 316LN ESR

A

Ø B

C

Flange Size [CF]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 7,75 34 4,4 480FDB016 50,00

40 12,7 69,9 6,6 480FDB040 66,00

63 17,5 113,5 8,4 480FDB063 255,00

100 19,8 152 8,4 480FDB100 345,00

160 22,2 202,4 8,4 480FDB160 510,00

200 24,5 253,2 8,4 480FDB200 825,00

250 26 304,8 8,4 480FDB250 1100,00



CF Spacer Flange with Bore Holesq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 7,75 34 4,4 16 420FDI016 26,00

40 12,7 69,9 6,6 37 420FDI040 35,00

63 17,5 113,5 8,4 66 420FDI063 102,00

100 19,8 152 8,4 102 420FDI100 150,00

160 22,2 202,4 8,4 155 420FDI160 190,00

200 24,5 253,2 8,4 200 420FDI200 285,00

250 26 304,8 8,4 250 420FDI250 415,00

A

Ø D C

Ø B

CF

Catalog 2010 215

Components



CF Spacer Flange with Bore Holes and Port(s)

q Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

Available with up to three DN 16 CF ports. Two ports: arranged at a 180° angle; three ports: at 90° angles.

Flange Size [DN]

No. of Ports

A [mm]

B [mm]

C [mm]


40 1 24 37 14 45 420FDP040-1-16 175,00

40 2 24 37 14 45 420FDP040-2-16 230,00

40 3 24 37 14 45 420FDP040-3-16 285,00

63 1 24 66 14 67 420FDP063-1-16 205,00

63 2 24 66 14 67 420FDP063-2-16 265,00

63 3 24 66 14 67 420FDP063-3-16 320,00

100 1 24 100 14 90 420FDP100-1-16 295,00

100 2 24 100 14 90 420FDP100-2-16 350,00

100 3 24 100 14 90 420FDP100-3-16 405,00

160 1 24 150 14 115 420FDP160-1-16 465,00

160 2 24 150 14 115 420FDP160-2-16 520,00

160 3 24 150 14 115 420FDP160-3-16 575,00

Ø BA

D

ØC


CF Spacer Flange with Bore Holes, 316LN ESRq Material: Forgedq Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Magnetic permeability: ≤ 1.01q Low desorption*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 7,75 34 4,4 16 480FDI016 50,00

40 12,7 69,9 6,6 37 480FDI040 66,00

63 17,5 113,5 8,4 66 480FDI063 255,00

100 19,8 152 8,4 102 480FDI100 345,00

160 22,2 202,4 8,4 155 480FDI160 510,00

200 24,5 253,2 8,4 200 480FDI200 825,00

250 26 304,8 8,4 250 480FDI250 1100,00

A

Ø D C

Ø B

CF

216 Catalog 2010

Components


CF Spacer Flange with Bore Holes and Port(s), Stainless Steel 304L


CF Spacer Flange with Bore Holes and Ports, 316LN ESR

q Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Magnetic permeability, flanges: ≤ 1.01q Low desorptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available upon request*Please observe limits for seal materials and screws

Available with up to three DN 16 CF ports. Two ports: arranged at a 180° angle; three ports: at 90° angles.

Flange Size [DN]

Port A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

40 1 24 37 14 45 480FDP040-1-16 295,00

40 2 24 37 14 45 480FDP040-2-16 390,00

40 3 24 37 14 45 480FDP040-3-16 485,00

63 1 24 66 14 67 480FDP063-1-16 475,00

63 2 24 66 14 67 480FDP063-2-16 585,00

63 3 24 66 14 67 480FDP063-3-16 700,00

100 1 24 100 14 90 480FDP100-1-16 660,00

100 2 24 100 14 90 480FDP100-2-16 770,00

100 3 24 100 14 90 480FDP100-3-16 910,00

160 1 24 150 14 115 480FDP160-1-16 1040,00

160 2 24 150 14 115 480FDP160-2-16 1160,00

160 3 24 150 14 115 480FDP160-3-16 1280,00

200 1 24 200 14 140 480FDP200-1-16 1470,00

200 2 24 200 14 140 480FDP200-2-16 1580,00

200 3 24 200 14 140 480FDP200-3-16 1690,00

250 1 24 250 14 165 480FDP250-1-16 1760,00

250 2 24 250 14 165 480FDP250-2-16 1850,00

250 3 24 250 14 165 480FDP250-3-16 1960,00

Ø B

A

D

ØC

Flange Size [DN]

No. of Ports

A [mm]

B [mm]

C [mm]


200 1 24 200 14 140 420FDP200-1-16 650,00

200 2 24 200 14 140 420FDP200-2-16 705,00

200 3 24 200 14 140 420FDP200-3-16 760,00

250 1 24 250 14 165 420FDP250-1-16 875,00

250 2 24 250 14 165 420FDP250-2-16 930,00

250 3 24 250 14 165 420FDP250-3-16 985,00

CF

Catalog 2010 217

Components



CF Reducer Flange

q Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C = Thread D [mm] Item No. Price €

40 16 12,7 16 M4 6 420FLR040-016 50,00

63 16 17,5 16 M4 6 420FLR063-016 90,00

63 40 17,5 37 M6 9 420FLR063-040 95,00

100 40 19,8 37 M6 9 420FLR100-040 110,00

100 63 19,8 66 M8 13 420FLR100-063 135,00

160 40 22,2 37 M6 9 420FLR160-040 145,00

160 63 22,2 66 M8 13 420FLR160-063 170,00

160 100 22,2 100 M8 13 420FLR160-100 205,00

200 40 24,5 37 M6 9 420FLR200-040 260,00

200 63 24,5 66 M8 13 420FLR200-063 285,00

200 100 24,5 100 M8 13 420FLR200-100 315,00

200 160 24,5 155 M8 13 420FLR200-160 365,00

250 40 26 37 M6 9 420FLR250-040 545,00

250 63 26 66 M8 13 420FLR250-063 570,00

250 100 26 100 M8 13 420FLR250-100 605,00

250 160 26 155 M8 13 420FLR250-160 655,00

250 200 26 200 M8 13 420FLR250-200 730,00

A

Ø B

D

C

The reduced-size flange has blind tapped holes. Make sure the screws used for installation are the correct length.

CF

218 Catalog 2010

Components


Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

C = Thread D [mm] Item No. Price €

40 16 12,7 16 M4 6 480FLR040-016 88,00

63 16 17,5 16 M4 6 480FLR063-016 145,00

63 40 17,5 37 M6 9 480FLR063-040 155,00

100 40 19,8 37 M6 9 480FLR100-040 230,00

100 63 19,8 66 M8 13 480FLR100-063 250,00

160 40 22,2 37 M6 9 480FLR160-040 330,00

160 63 22,2 66 M8 13 480FLR160-063 350,00

160 100 22,2 100 M8 13 480FLR160-100 400,00

200 40 24,5 37 M6 9 480FLR200-040 560,00

200 63 24,5 66 M8 13 480FLR200-063 585,00

200 100 24,5 100 M8 13 480FLR200-100 640,00

200 160 24,5 155 M8 13 480FLR200-160 625,00

250 40 26 37 M6 9 480FLR250-040 1020,00

250 63 26 66 M8 13 480FLR250-063 1080,00

250 100 26 100 M8 13 480FLR250-100 1130,00

250 160 26 155 M8 13 480FLR250-160 1200,00

250 200 26 200 M8 13 480FLR250-200 1310,00


CF Reducer Flange, 316LN ESR


A

Ø B

D

C

The reduced-size flange has blind tapped holes. Make sure the screws used for installation are the correct length.

CF

Catalog 2010 219

Components


Stainless Steel

CF Full Nippleq One end fixed; one end rotatableq Item no. suffix -F: Both flanges fixedq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon requestq Other lengths and tube dimensions available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 16 420RZS016 60,00

16 76 16 420RZS016-F 60,00

40 126 37 420RZS040 65,00

40 126 37 420RZS040-F 65,00

63 210 66 420RZS063 160,00

63 210 66 420RZS063-F 160,00

100 270 104 420RZS100 200,00

100 270 104 420RZS100-F 200,00

160 334 155 420RZS160 405,00

160 334 155 420RZS160-F 405,00

200 406 200 420RZS200 745,00

200 406 200 420RZS200-F 745,00

A

B

CF

220 Catalog 2010

Components


A

B


CF Full Nipple, 316LN ESRq One end fixed; one end rotatableq Item no. suffix -F: both flanges fixedq Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Magnetic permeability, flanges: ≤ 1.01q Low desorptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available on requestq Other lengths and tube dimensions on request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 16 480RZS016 127,50

16 76 16 480RZS016-F 120,00

40 126 37 480RZS040 150,00

40 126 37 480RZS040-F 139,50

63 210 66 480RZS063 427,50

63 210 66 480RZS063-F 397,00

100 270 104 480RZS100 555,00

100 270 104 480RZS100-F 500,00

160 334 155 480RZS160 1050,00

160 334 155 480RZS160-F 937,50

200 406 200 480RZS200 1875,00

200 406 200 480RZS200-F 1685,00

CF

Catalog 2010 221

Components


Stainless Steel

CF 90° Elbow, Miteredq One end fixed, one end rotatableq Item no. suffix -F: Both flanges fixedq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

Item No. Price €

16 38 420RWS016-90 75,00

16 38 420RWS016-90-F 75,00

40 63 420RWS040-90 90,00

40 63 420RWS040-90-F 90,00

63 105 420RWS063-90 225,00

63 105 420RWS063-90-F 225,00

100 135 420RWS100-90 325,00

100 135 420RWS100-90-F 325,00

160 167 420RWS160-90 495,00

160 167 420RWS160-90-F 495,00

200 203 420RWS200-90 985,00

200 203 420RWS200-90-F 985,00

A

A

CF

222 Catalog 2010

Components


A

A


CF 90° Elbow, Mitered, 316LN ESRq One end fixed; one end rotatableq Item no. suffix -F: Both flanges fixedq Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Magnetic permeability, flanges: ≤ 1.01q Low desorptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

Item No. Price €

16 38 480RWS016-90 135,00

16 38 480RWS016-90-F 127,50

40 63 480RWS040-90 187,50

40 63 480RWS040-90-F 172,50

63 105 480RWS063-90 525,00

63 105 480RWS063-90-F 485,00

100 135 480RWS100-90 750,00

100 135 480RWS100-90-F 690,00

160 167 480RWS160-90 1110,00

160 167 480RWS160-90-F 1000,00

200 203 480RWS200-90 2100,00

200 203 480RWS200-90-F 1940,00

CF

Catalog 2010 223

Components


Stainless Steel

CF Teeq One rotatable flange per axisq Item no. suffix -F: No rotatable flangesq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

A

B

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 38 420RTS016 100,00

16 76 38 420RTS016-F 100,00

40 126 63 420RTS040 125,00

40 126 63 420RTS040-F 125,00

63 210 105 420RTS063 250,00

63 210 105 420RTS063-F 230,00

100 270 135 420RTS100 350,00

100 270 135 420RTS100-F 330,00

160 334 167 420RTS160 750,00

160 334 167 420RTS160-F 750,00

200 406 203 420RTS200 1250,00

200 406 203 420RTS200-F 1250,00

CF

224 Catalog 2010

Components


A

B


CF Tee, 316LN ESRq One rotatable flange per axisq Item no. suffix -F: No rotatable flangesq Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Magnetic permeability, flanges: ≤ 1.01q Low desorptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 38 480RTS016 180,00

16 76 38 480RTS016-F 172,00

40 126 63 480RTS040-F 230,00

63 210 105 480RTS063 575,00

63 210 105 480RTS063-F 545,00

100 270 135 480RTS100 840,00

100 270 135 480RTS100-F 780,00

160 334 167 480RTS160 1500,00

160 334 167 480RTS160-F 1385,00

200 406 203 480RTS200 2495,00

200 406 203 480RTS200-F 2340,00

CF

Catalog 2010 225

Components


Stainless Steel

CF Reducer Teeq One rotatable flange per axisq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

40 16 126 60 420RTR040-016 105,00

63 40 210 77 420RTR063-040 230,00

100 40 270 95 420RTR100-040 270,00

100 63 270 95 420RTR100-063 330,00

160 40 334 120 420RTR160-040 470,00

160 63 334 120 420RTR160-063 530,00

160 100 334 120 420RTR160-100 570,00

200 40 406 145 420RTR200-040 780,00

200 63 406 145 420RTR200-063 830,00

200 100 406 145 420RTR200-100 880,00

200 160 406 145 420RTR200-160 1050,00

250 40 500 170 420RTR250-040 1170,00

250 63 500 170 420RTR250-063 1230,00

250 100 500 170 420RTR250-100 1270,00

250 160 500 170 420RTR250-160 1360,00

250 200 500 170 420RTR250-200 1510,00

A

B

CF

226 Catalog 2010

Components


Stainless Steel

CF 4-Way Crossq One rotatable flange per axisq Item no. suffix -F: No rotatable flangesq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 38 420RKS016 125,00

16 76 38 420RKS016-F 125,00

40 126 63 420RKS040 160,00

40 126 63 420RKS040-F 160,00

63 210 105 420RKS063 350,00

63 210 105 420RKS063-F 350,00

100 270 135 420RKS100 630,00

100 270 135 420RKS100-F 630,00

160 334 167 420RKS160 995,00

160 334 167 420RKS160-F 995,00

200 406 203 420RKS200 1745,00

200 406 203 420RKS200-F 1745,00

A

B

CF

Catalog 2010 227

Components



CF Cross, 316LN ESRq One rotatable flange per axisq Item no. suffix -L: No rotatable flangesq Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Magnetic permeability, flanges: ≤ 1.01q Low desorptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 38 480RKS016 165,00

16 76 38 480RKS016-F 160,00

40 126 63 480RKS040 300,00

40 126 63 480RKS040-F 300,00

63 210 105 480RKS063 725,00

63 210 105 480RKS063-F 695,00

100 270 135 480RKS100 1350,00

100 270 135 480RKS100-F 990,00

160 334 167 480RKS160 1890,00

160 334 167 480RKS160-F 1775,00

200 406 203 480RKS200 3100,00

200 406 203 480RKS200-F 3150,00

A

B

CF

228 Catalog 2010

Components


Stainless Steel

CF 4-Way Reducer Crossq One rotatable flange per axisq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

40 16 126 60 420RKR040-016 165,00

63 40 210 77 420RKR063-040 330,00

100 40 270 95 420RKR100-040 465,00

100 63 270 95 420RKR100-063 598,00

160 40 334 120 420RKR160-040 715,00

160 63 334 120 420RKR160-063 865,00

160 100 334 120 420RKR160-100 995,00

200 40 406 145 420RKR200-040 1015,00

200 63 406 145 420RKR200-063 1145,00

200 100 406 145 420RKR200-100 1375,00

200 160 406 145 420RKR200-160 1625,00

250 40 500 170 420RKR250-040 1625,00

250 63 500 170 420RKR250-063 2045,00

250 100 500 170 420RKR250-100 2195,00

250 160 500 170 420RKR250-160 2345,00

250 200 500 170 420RKR250-200 2545,00

B

A

CF

Catalog 2010 229

Components


Stainless Steel

Stainless steel

CF 5-Way Cross

CF 6-Way Cross

q One rotatable flange per axisq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

q One rotatable flange per axisq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 38 420RKF016 240,00

40 126 63 420RKF040 320,00

63 210 105 420RKF063 720,00

100 270 135 420RKF100 945,00

160 334 167 420RKF160 1830,00

200 406 203 420RKF200 2300,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 76 38 420RKD016 290,00

40 126 63 420RKD040 380,00

63 210 105 420RKD063 750,00

100 270 135 420RKD100 985,00

160 334 167 420RKD160 1900,00

200 406 203 420RKD200 2400,00

A

B

A

B

CF

230 Catalog 2010

Components


Stainless steel

CF 6-Way Reducer Crossq One rotatable flange per axisq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon request*Please observe limits for seal materials and screws

B

A

Flange Size [DN]

Reduced Flange Size

[DN]]

A [mm]

B [mm]

Item No. Price €

40 16 126 60 420RDR040-016 340,00

63 16 210 77 420RDR063-016 440,00

63 40 210 77 420RDR063-040 480,00

100 16 270 95 420RDR100-016 740,00

100 40 270 95 420RDR100-040 780,00

100 63 270 95 420RDR100-063 860,00

160 16 334 120 420RDR160-016 1440,00

160 40 334 120 420RDR160-040 1480,00

160 63 334 120 420RDR160-063 1520,00

160 100 334 120 420RDR160-100 1580,00

200 16 406 145 420RDR200-016 1740,00

200 40 406 145 420RDR200-040 1780,00

200 63 406 145 420RDR200-063 1820,00

200 100 406 145 420RDR200-100 1880,00

200 160 406 145 420RDR200-160 2050,00

250 16 500 170 420RDR250-016 2340,00

250 40 500 170 420RDR250-040 2380,00

250 63 500 170 420RDR250-063 2420,00

250 100 500 170 420RDR250-100 2580,00

250 160 500 170 420RDR250-160 2950,00

CF

Catalog 2010 231

Components


Stainless Steel

CF Reducer Nipple, Straightq Reduced flange size rotatableq Item no. suffix -F: No rotatable flangesq Material: Flange: 304L stainless steel; tube: 304L or betterq Operating temperature: -196 to 300 °C*q Bakeable up to 450 °C*q Pressure range: 1 bar to 10-12 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Tube surface: Glass bead blasted (polished version on request)q Other flange and tube materials available upon requestq Other lengths and tube dimensions available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

40 16 70 16 420RRG040-016 60,00

40 16 70 16 420RRG040-016-F 56,00

63 16 70 16 420RRG063-016 90,00

63 16 70 16 420RRG063-016-F 85,00

63 40 70 37 420RRG063-040 105,00

63 40 70 37 420RRG063-040-F 102,00

100 40 70 37 420RRG100-040 120,00

100 40 70 37 420RRG100-040-F 115,00

100 63 70 66 420RRG100-063 145,00

100 63 70 66 420RRG100-063-F 135,00

160 40 70 37 420RRG160-040 170,00

160 40 70 37 420RRG160-040-F 165,00

160 63 127 66 420RRG160-063 200,00

160 63 127 66 420RRG160-063-F 185,00

160 100 127 104 420RRG160-100 220,00

160 100 127 104 420RRG160-100-F 200,00

200 40 75 37 420RRG200-040 260,00

200 63 127 66 420RRG200-063 320,00

200 100 127 104 420RRG200-100 365,00

200 160 127 153 420RRG200-160 415,00

250 40 105 37 420RRG250-040 550,00

250 63 105 66 420RRG250-063 600,00

250 100 105 104 420RRG250-100 650,00

250 160 105 153 420RRG250-160 715,00

250 200 105 200 420RRG250-200 800,00

A

ØB

CF

232 Catalog 2010

Components


A

ØB


CF Reducer Nipple, Straight, 316LN ESRq Reduced flange size rotatableq Item no. suffix -F: No rotatable flangesq Material: Flange: 316LN ESR/1.4429 stainless steel, forged; tubes: 316L/1.4404q Operating temperature: -196 to 350 °C*q Bakeable up to 450 °C*q Bakeable under vacuum up to 1050 °Cq Pressure range: 1 bar to 10-13 mbar*q Helium leak rate: ≤ 1 × 10-10 mbar × l/sq Magnetic permeability, flanges: ≤ 1.01q Low desorptionq Tube surface: Glass bead blasted (polished version on request)q Other tube materials available upon requestq Other lengths and tube dimensions available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

Reduced Flange Size

[DN]

A [mm]

B [mm]

Item No. Price €

40 16 70 16 480RRG040-016 142,00

40 16 70 16 480RRG040-016-F 132,00

63 16 70 16 480RRG063-016 210,00

63 16 70 16 480RRG063-016-F 198,00

63 40 70 37 480RRG063-040 168,00

63 40 70 37 480RRG063-040-F 235,00

100 40 70 37 480RRG100-040 275,00

100 40 70 37 480RRG100-040-F 270,00

100 63 70 66 480RRG100-063 335,00

100 63 70 66 480RRG100-063-F 300,00

160 40 70 37 480RRG160-040 450,00

160 40 70 37 480RRG160-040-F 435,00

160 63 127 66 480RRG160-063 525,00

160 63 127 66 480RRG160-063-F 485,00

160 100 127 100 480RRG160-100 575,00

160 100 127 100 480RRG160-100-F 525,00

200 40 75 37 480RRG200-040 705,00

200 63 127 66 480RRG200-063 840,00

200 100 127 100 480RRG200-100 985,00

200 160 127 153 480RRG200-160 1125,00

250 63 105 37 480RRG250-040 1485,00

250 63 105 66 480RRG250-063 1620,00

250 100 105 100 480RRG250-100 1755,00

250 160 105 153 480RRG250-160 1920,00

250 200 105 200 480RRG250-200 2175,00

CF

Catalog 2010 233

Components


304/1.4301 Stainless Steel; CF Flange: 304L/1.4307 Stainless Steel

ISO-KF/CF Adapterq Pressure range: 1 bar to 10-7 mbar (elastomer seal)*q Pressure range: 1 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*q Other combinations and custom lengths available on short notice*Please observe limits for seal materials and fastening elements

CF Flange Size

[DN]

ISO-KF Flange Size

[DN]

A [mm]


16 16 36 16 420RUG016-016-36 46,00

16 25 36 16 420RUG016-025-36 51,00

16 40 36 16 420RUG016-040-36 56,00

16 50 50 16 420RUG016-050-50 66,00

40 16 36 16 420RUG040-016-36 58,00

40 25 36 24 420RUG040-025-36 63,00

40 40 50 40 420RUG040-040-50 68,00

40 50 50 40 420RUG040-050-50 78,00

63 16 36 16 420RUG063-016-36 90,00

63 25 50 24 420RUG063-025-50 110,00

63 40 50 40 420RUG063-040-50 120,00

63 50 50 51 420RUG063-050-50 130,00

100 16 36 16 420RUG100-016-36 135,00

100 25 50 24 420RUG100-025-50 145,00

100 40 50 40 420RUG100-040-50 155,00

100 50 50 51 420RUG100-050-50 175,00

A

ØB

CF

234 Catalog 2010

Components


Stainless Steel 304/1.4301; CF Flange: 304L

ISO-K/CF Adapter

ISO-K Flange Size

[DN]

CF Flange Size

[DN]

A [mm]


63 16 60 16 420RUG016-063-60 85,00

63 40 70 37 420RUG040-063-70 95,00

63 63 90 66 420RUG063-063-90 150,00

63 100 90 70 420RUG100-063-90 200,00

63 160 90 70 420RUG160-063-90 265,00

63 200 90 70 420RUG200-063-90 305,00

63 250 90 70 420RUG250-063-90 475,00

80 16 60 16 420RUG016-080-60 95,00

80 40 70 37 420RUG040-080-70 105,00

80 63 90 66 420RUG063-080-90 170,00

80 100 90 83 420RUG100-080-90 210,00

80 160 90 83 420RUG160-080-90 265,00

80 200 90 83 420RUG200-080-90 315,00

80 250 90 83 420RUG250-080-90 495,00

100 16 60 16 420RUG016-100-60 95,00

100 40 70 37 420RUG040-100-70 105,00

100 63 90 66 420RUG063-100-90 185,00

100 100 90 102 420RUG100-100-90 230,00

100 160 90 102 420RUG160-100-90 275,00

100 200 90 102 420RUG200-100-90 325,00

100 250 90 102 420RUG250-100-90 505,00

160 16 60 16 420RUG016-160-60 135,00

160 40 70 37 420RUG040-160-70 155,00

160 63 90 66 420RUG063-160-90 235,00

160 100 90 102 420RUG100-160-90 265,00

160 160 100 153 420RUG160-160-100 355,00

160 200 90 153 420RUG200-160-90 375,00

160 250 90 153 420RUG250-160-90 525,00

200 40 70 37 420RUG040-200-70 240,00

200 63 90 66 420RUG063-200-90 325,00

200 100 90 102 420RUG100-200-90 365,00

200 160 100 153 420RUG160-200-100 405,00

200 200 110 200 420RUG200-200-110 435,00

200 250 110 213 420RUG250-200-110 545,00

250 40 70 37 420RUG040-250-70 275,00

A

ØB

q Other flange sizes and dimensions available upon requestq Pressure range: 1 bar to 10-7 mbar (elastomer seal)*q Pressure range: 1 bar to 10-9 mbar (metal seal)*q Temperature range: -196 to 300 °C**Please observe limits for seal materials and fastening elements

CF

Catalog 2010 235

Components


Stainless Steel for Metric Sizes

Stainless Steel for Imperial (Inch) Sizes

CF-Swagelok® Adapterq For metric and imperial (inch) tube diameters q CF flange material: 304L stainless steelq Pressure range: 1 bar to 10-9 mbar*q Operating temperature: -196 to 300 °C*q Original Swagelok® fitting q Other flanges sizes and pipe diameters available upon request*Please observe limits for seal materials and seals

A

B

Flange Size [DN]

Tube OD A [mm]

Item No. Price €

16 4 mm 32 420ASW016-4 58,00

16 6 mm 39 420ASW016-6 55,00

16 8 mm 40 420ASW016-8 58,00

40 10 mm 42 420ASW040-10 60,00

40 12 mm 45 420ASW040-12 69,00

40 16 mm 50 420ASW040-16 79,00

40 4 mm 36 420ASW040-4 65,00

40 6 mm 39 420ASW040-6 65,00

40 8 mm 40 420ASW040-8 68,00

Flange Size [DN]

Tube OD A [mm]

Item No. Price €

16 1/8“ 32 420ASW016-0125 57,00

16 1/4“ 39 420ASW016-0250 55,00

16 3/8“ 41 420ASW016-0375 60,00

40 1/8“ 37 420ASW040-0125 60,00

40 1/4“ 41 420ASW040-0250 58,00

40 3/8“ 46 420ASW040-0375 65,00

40 1/2“ 50 420ASW040-0500 70,00

40 3/4“ 52 420ASW040-0750 105,00

40 1“ 63 420ASW040-1000 125,00

ISO-K Flange Size

[DN]

CF Flange Size

[DN]

A [mm]


250 63 90 66 420RUG063-250-90 350,00

250 100 90 102 420RUG100-250-90 400,00

250 160 90 153 420RUG160-250-90 455,00

250 200 90 200 420RUG200-250-90 485,00

250 250 110 250 420RUG250-250-110 595,00

ISO-K/CF Adapter, Stainless Steel 304/1.4301; CF Flange: 304L

CF

236 Catalog 2010

Components


Stainless Steel, Female

Stainless Steel, Male

CF-VCR Adapter, Male and Female q Original Swagelok® VCR adapter q CF flange material: 304L SS; VCR connector: 316L/1.4404 SSq Pressure range: 1 bar to 10-9 mbar*q Operating temperature: -196 to 300 °Cq Other flange sizes and VCR adapters available upon request*Please observe limits for seal materials and screwsn

Flange Size [DN]


Item No. Price €

16 1/8“ 29 420AVF016-0125 67,00

16 1/4“ 44 420AVF016-0250 63,00

16 1/2“ 47 420AVF016-0500 80,00

40 1/8“ 37 420AVF040-0125 70,00

40 1/4“ 44 420AVF040-0250 66,00

40 1/2“ 47 420AVF040-0500 85,00

40 3/4“ 53 420AVF040-0750 150,00

40 1“ 60 420AVF040-1000 195,00

Flange Size [DN]


Item No. Price €

16 1/8“ 29 420AVM016-0125 65,00

16 1/4“ 44 420AVM016-0250 62,00

16 1/2“ 47 420AVM016-0500 75,00

40 1/8“ 37 420AVM040-0125 68,00

40 1/4“ 44 420AVM040-0250 65,00

40 1/2“ 47 420AVM040-0500 78,00

40 3/4“ 53 420AVM040-0750 125,00

40 1“ 60 420AVM040-1000 165,00

A

A

CF

Catalog 2010 237

Components


Stainless Steel, without Viewport

Stainless Steel, with Viewport

CF Doorq Pressure range: 1 bar to 10-7 mbar*q Operating temperature: -15 to 150 °C*q Bakeable up to 200 °C*q Item no. suffix -G: Viewport made of borosilicateq Door seal: FPMq Viewport seal: FPMq Screw holes: Through-holes with counter-bore for cylinder headq Can be installed using hexagon socket screwsq Screw holes: Tapped upon request*Please observe limits for seal materials and screws

A B

C

Ø D

F

E

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

E [mm]

Item No. Price €

63 88 72 16 - 10 16 420KTU063 750,00

100 108 93 16 - 10 16 420KTU100 775,00

160 134 119 20 - 10 16 420KTU160 1220,00

200 160 145 20 - 10 16 420KTU200 1740,00

250 186 171 20 - 10 16 420KTU250 2150,00

300 215 200 20 - 12,5 18 420KTU300 2540,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

E [mm]

Item No. Price €

63 88 72 23 64 10 16 420KTU063-G 810,00

100 108 93 27 95 10 16 420KTU100-G 895,00

160 134 119 27 146 10 16 420KTU160-G 1325,00

200 160 145 27 146 10 16 420KTU200-G 1850,00

250 186 171 27 146 10 16 420KTU250-G 2250,00

300 215 200 27 146 12,5 18 420KTU300-G 2600,00

CF

238 Catalog 2010

Components


Stainless Steel,with Metric Thread

Stainless Steel,with Imperial (Inch) Thread

CF Cubeq Material: stainless steel 304L/1.4306q Up to DN 100: Manufactured from forged cube q DN 160 and larger: Manufactured from welded platesq Pressure range: 1 bar to 10-12 mbar*q Operating temperature: -196 to 300 °Cq Bakeable up to 450 °C*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C = Thread Tap Depth Item No. Price €

16 35 16 M4 5 470RKK016 600,00

40 70,5 38 M6 8 470RKK040 885,00

63 114 66 M8 8 470RKK063 1985,00

100 155 104 M8 8 470RKK100 2850,00

160 208 155 M8 8 470RKK160 4980,00

200 259 199 M8 8 470RKK200 7500,00

250 311 249 M8 8 470RKK250 11200,00

Flange Size [DN]

A [mm]

B [mm]

C = Thread Tap Depth Item No. Price €

16 35 16 8-32 5 470RKK016-T 750,00

40 70,5 38 1/4-28 8 470RKK040-T 1230,00

63 114 66 5/16-24 8 470RKK063-T 2700,00

100 155 104 5/16-24 8 470RKK100-T 3750,00

160 208 155 5/16-24 8 470RKK160-T 7200,00

200 259 199 5/16-24 8 470RKK200-T 7125,00

A

B

C

CF

Catalog 2010 239

Components


Stainless steel

CF Pipe

CF Flange Cap

Flange Size [DN]

Quantity per Package Item No. Price €

16 1 430FSK016-S1 0,80

16 10 430FSK016-S10 7,00

40 1 430FSK040-S1 1,00

40 10 430FSK040-S10 10,00

63 1 430FSK063-S1 2,00

63 10 430FSK063-S10 20,00

100 1 430FSK100-S1 2,20

100 10 430FSK100-S10 22,00

160 1 430FSK160-S1 3,20

160 10 430FSK160-S10 31,00

200 1 430FSK200-S1 22,00

200 10 430FSK200-S10 41,00

250 1 430FSK250-S1 32,00

Polyethylene (PE)

A = Tube OD [mm]

Tube ID [mm]

B = Wall thickness Item No. Price €

18 16 1 470RRO016 35,00

40 37 1,5 470RRO040 40,00

70 66 2 470RRO063 70,00

104 100 2 470RRO100 160,00

154 150 2 470RRO160 165,00

204 200 2 470RRO200 225,00

254 250 2 470RRO250 320,00

B

Ø A

q Surface: Untreatedq Glass bead blasted on requestq Tolerance class: D3/T3 in acc. w/ EN ISO 1127: Outer diameter ± 0.75% with min. ± 0.3 mm; wall thickness ± 10% with min. ± 0.2 mmq Price: Per meter q Any length up to 6 m (236 in) availableq Minimum order: 1 m (3.28 ft); orders > 1 m calculated pro rata

NOTES

COF Bolt Flange Components

COF


Contents

COF Fastening Elements

COF Screw Set ............................................................245

COF Seals

COF Copper Wire Seal ................................................246

COF Elastomer Seal ....................................................246

COF Components

COF Blank Flange .......................................................247

COF Blank Flange, with Domed Stainless Steel Disk or Dished Head ..........................................................248

COF Weld Flange .......................................................249

COF


COF (Wire Seal) Fasteners and Components

The term ultra high vacuum (UHV) denotes the pressure range below 10-7 mbar. In order to achieve and maintain these kinds of low pres-sures, the outgassing rate (desorption) of the entire equipment has to be extremely low. This can only be achieved through the use of UHV-suitable materials and by baking out the entire equipment. If the ultimate pressure of the vacuum pump being used is sufficiently low, the ultimate pressure of the vacuum system will be governed es-sentially by the desorption rates of the interior surfaces. Components from TRINOS are welded from the inside, as is good practice for vacuum applications, or full-penetration welded if necessitated by the geometry in order to avoid virtual leaks, such as gaps and blind holes. Together with suitable materials and clean surfaces provided by special cleaning methods that incorporate industrial automation, this assures components with low desorption rates.

The standard process is to glass bead-blast or chemically etch wel-ded components. We also offer you alternative surface treatment methods upon request, such as grinding, electropolishing or anne-aling. All components are helium leak tested and possess leak rates of better than 10-10 mbar × l/s. We manufacture COF components from stainless steel, which offers corrosion protection in connection with bakeout and possesses sufficient flange connection strength. We use low-carbon 304L as standard. To produce the lowest ultima-te pressures and low permeabilities, we also offer components made from 1.4429 ESU (316LN ESR) premium stainless steel. Flanges of 1.4429 ESU are harder and can be annealed to 1050°C under vacu-um (cleaning annealing, low-hydrogen annealing or demagnetiza-

tion annealing). Moreover, the electroslag remelting (ESR) process affords greater chemical and structural cleanliness, and thus a lower desorption rate. Further information on our stainless steels can be found in the chapter entitled “Materials.”

1

Figure 1: Section through a COF flange connection

Figure 2: COF female (top) and male (bottom) blank flanges

2

Nominal diameter 250COF 300COF 350COF 400COF 450COF 500COF 600COF 800COF

Outside diameter A [mm] 314 371 438 497 562 590 690 890

Flange height B [mm]

28,5 28,5 28,5 33 38 43 43 43

Typical pipe dimension* C × D [mm] 256×3 306×3 356×3 406×3 458×4 508×4 610×5 812×6

Typical inside dia.** E [mm]

250 300 350 400 450 500 600 800

Bolt hole pattern F [mm] 288,3 345,4 399 454 513,1 559 661 859

Bolt hole dia. G [mm] 10,5 10,5 13 13 17 17 17 17

Bolts, metric 24×M10 32×M10 36×M12 36×M12 36×M16 36×M16 40×M16 52×M16

ØA

B

ØC

D

ØE

ØF

G

* Flanges with further pipe dimensions are available upon request.** The minimum inside diameter is governed by the combination of flange and pipe. In addition, welds and manufacturing variances from the nominal size can locally reduce the clear diameter.

COF


COF flanges are employed for ultra high vacuum pipe connections involving large nominal diameters. They are not standardized. TRI-NOS manufactures COF flanges in nominal diameters of DN 250 to DN 800. Intermediate sizes can be fabricated, as well as counter-flanges for your existing flanges.


q The pressures indicated the following product descriptions are absolute pressures, at an ambient pressure of 1000 mbar.

q The minimum achievable ultimate pressure in the entire system will be governed by a number of factors, in particular by the pump system, the desorption rates of the interior surfaces and the pump-down time. The minimum pressures indicated in the product descriptions are based upon experience as to what can be achieved in a well designed vacuum system. Actual pressu-res could be higher or lower in individual cases. If elastomer seals are employed, it will additionally be necessary to take gas permeation into consideration. It will be a function of the ma-terial, temperature and type of gas in question. Typical ultimate pressures of the elastomers can be found in the chapter entitled “Materials.”


q The flange connections and components were developed in or-der to achieve vacuum-tight connections. They can only assume limited mechanical loads. In designing a vacuum system, it is therefore necessary to review whether static or dynamic loads will have to be assumed by additional elements, such as hol-ders.

COF

Catalog 2010 245

Fastening Elements




COF Screw Setq For the assembly of two flanges with through holesq Set includes the screws required for the specified flange sizeq Set includes two washers and one nut for each screw

Flange Size [DN]

A [mm]

B = Thread Pkg. [Qty.]

Item No. Price €

250 65 M10 24 620BSC250 45,00

300 65 M10 32 620BSC300 60,00

350 70 M12 36 620BSC350 95,00

400 75 M12 36 620BSC400 100,00

450 90 M16 36 620BSC450 190,00

500 100 M16 36 620BSC500 200,00

600 100 M16 40 620BSC600 220,00

800 100 M16 52 620BSC800 220,00

Flange Size [DN]

A [mm]


Item No. Price €

250 65 M10 24 670BSC250 65,00

300 65 M10 32 670BSC300 80,00

350 70 M12 36 670BSC350 120,00

400 75 M12 36 670BSC400 140,00

450 90 M16 36 670BSC450 240,00

500 100 M16 36 670BSC500 255,00

600 100 M16 40 670BSC600 280,00

800 100 M16 52 670BSC800 364,00

A

B

COF

246 Catalog 2010

Seals


OFHC Copper (Annealed)

FPM/FKM

COF Copper Wire Seal

COF Elastomer Seal

q Temperature range: -196 to 200 °C*q For single use only

q Pressure range: 1 bar to 10-7 mbar q Temperature range: -15°C to 150 °Cq For single use only

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

250 273,1 2 690DDR250 35,00

300 330,2 2 690DDR300 45,00

350 381,0 2 690DDR350 55,00

400 435,8 2 690DDR400 65,00

450 491,4 2 690DDR450 80,00

500 535,4 2 690DDR500 100,00

600 635,4 2 690DDR600 125,00

800 835,4 2 690DDR800 125,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

250 273 2,5 602DOR250-S1 21,00

320 330 2,5 602DOR300-S1 39,00

320 381 2,5 602DOR350-S1 45,00

400 436 2,5 602DOR400-S1 52,00

500 535 2,5 602DOR500-S1 65,00

600 635 2,5 602DOR600-S1 104,00

800 835 2,5 602DOR800-S1 300,00

Ø A

B

Ø A

B

COF

Catalog 2010 247

Components




COF Blank Flangeq Flange material: 304L/1.4306 stainless steel, forgedq Pressure range: 1 bar to 10-12 mbar*

q Operating temperature: -196 to 200 °C*

q Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

250 28,5 314 288,3 10,5 620FBF250 880,00

300 28,5 371 345,4 10,5 620FBF300 1375,00

350 28,5 438 399,0 13 620FBF350 1760,00

400 33 497 454,0 13 620FBF400 2200,00

450 38 562 513,1 17 620FBF450 2640,00

500 43 595 559,0 17 620FBF500 3300,00

600 43 690 661,0 17 620FBF600 4070,00

800 43 890 859,0 17 620FBF800 5800,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

250 28,5 314 288,3 10,5 620FBM250 880,00

300 28,5 371 345,4 10,5 620FBM300 1375,00

350 28,5 438 399,0 13 620FBM350 1760,00

400 33 497 454,0 13 620FBM400 2200,00

450 38 562 513,1 17 620FBM450 2640,00

500 43 595 559,0 17 620FBM500 3300,00

600 43 690 661,0 17 620FBM600 4070,00

800 43 890 859,0 17 620FBM800 5800,00

A

Ø BØ C

D

A

Ø B

Ø C

D

COF

248 Catalog 2010

Components


COF Blank Flange, with Domed Stainless Steel Disk or Dished Headq Material, flange: 304L/1.4306 stainless steel, forgedq Pressure range: 1 bar to 10-12 mbar*

q Temperature range: -196 to 200 °C*

q Other flange materials available upon request*Please observe limits for seal materials



Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

No. of screws needed

Item No. Price €

400 33 497 454,0 13 36 x M12 620FBF400-S 2200,00

450 38 562 513,1 17 36 x M16 620FBF450-S 2640,00

500 43 595 559,0 17 36 x M16 620FBF500-S 3300,00

600 43 690 661,0 17 40 x M16 620FBF600-S 4070,00

800 43 890 859,0 17 52 x M16 620FBF800-S 5800,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

No. of screws needed

Item No. Price €

400 33 497 454,0 13 36 x M12 620FBM400-S 2200,00

450 38 562 513,1 17 36 x M16 620FBM450-S 2640,00

500 43 595 559,0 17 36 x M16 620FBM500-S 3300,00

600 43 690 661,0 17 40 x M16 620FBM600-S 4070,00

800 43 890 859,0 17 52 x M16 620FBM800-S 5800,00

A

Ø BØ C

D

A

Ø BØ C

D

COF

Catalog 2010 249

Components


Stainless steel, female

Stainless steel, male

COF Weld Flange q Flange material: 304L/1.4306 stainless steel, forgedq Pressure range: 1 bar to 10-12 mbar*

q Operating temperature: -196 to 300 °C*

q With weld lipq Other flange materials available upon request*Please observe limits for seal materials and screws

Flange Size [DN]

Tube OD [mm]

Tube OD [mm]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

250 256 x 3 10“ 28,5 314 256,3 250 620FAF250 750,00

300 306 x 3 12“ 28,5 371 306,3 300 620FAF300 1050,00

350 356 x 3 14“ 28,5 438 356,3 350 620FAF350 1350,00

400 406 x 3 16“ 33 497 406,3 400 620FAF400 1650,00

450 458 x 4 18“ 38 562 458,5 450 620FAF450 1950,00

500 508 x 4 20“ 43 595 508,5 500 620FAF500 2350,00

600 610 x 5 24“ 43 690 610,5 600 620FAF600 2950,00

800 812 x 6 32“ 43 890 812,5 800 620FAF800 4100,00

Flange Size [DN]

Tube OD [mm]

Tube OD [mm]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

250 256 x 3 10“ 28,5 314 256,3 250 620FAM250 750,00

300 306 x 3 12“ 28,5 371 306,3 300 620FAM300 1050,00

350 356 x 3 14“ 28,5 438 356,3 350 620FAM350 1350,00

400 406 x 3 16“ 33 497 406,3 400 620FAM400 1650,00

450 458 x 4 16“ 38 562 458,5 450 620FAM450 1950,00

500 508 x 4 20“ 43 595 508,5 500 620FAM500 2350,00

600 610 x 5 24“ 43 690 610,5 600 620FAM600 2950,00

800 812 x 6 32“ 43 890 812,5 800 620FAM800 4100,00

A

Ø C

Ø BØ D

A

Ø B

Ø C

Ø D

NOTES

Hoses and Flexible Connectors



KF

ISO-KF Corrugated Hose, Flexible ...............................254

ISO-KF Corrugated Hose, Flexible, Annealed ..............255

ISO-KF Corrugated Hose, Highly Flexible, Thin-wall ....256

ISO-KF Corrugated Hose, Sheathed ............................257

ISO-KF Spring Bellow with Weld Ends ........................258

ISO-KF Spring Bellow ..................................................259

ISO-KF Diaphragm Bellows .........................................260

ISO-KF CR Sleeve ........................................................260

ISO-KF PVC Hose with Embedded Spring and Flanges ................................................................261

ISO-KF PVC Hose with Embedded Spring .......................................................261

ISO-KF Adapter for PVC Hose .....................................262

ISO-KF Rubber Hose ...................................................263

ISO-KF Hose Connector ..............................................263

Contents

ISO-K

ISO-K Corrugated Hose, Flexible .................................265

ISO-K Corrugated Hose, Flexible, Annealed ................266

ISO-K Spring Bellow with Weld Ends ..........................266

ISO-K Spring Bellow ...................................................267

ISO-K Diaphragm Bellows...........................................268

ISO-K CR Sleeve ..........................................................268

ISO-K Flange with PVC Hose Adapter .........................269

ISO-K PVC Hose with Embedded Spring and Flanges ................................................................269

ISO-K PVC Hose with Embedded Spring .......................................................270

CF

ISO-CF Corrugated Hose, Flexible ...............................271

ISO-CF Spring Bellow ..................................................272




Flexible metal hoses connect system components and can easily be adapted to suit local conditions. The minimum bend radius must be taken into consideration.

The indicated pressure ranges are absolute pressures and, like the bend radii, are valid for a temperature of 20°C at an ambient pres-sure of 1000 mbar.

q Bend radius, single motion: Tested to ISO 10380 7.4.2.

q Bend radius, frequent bends: Multiple bends without any major dynamic stress.

q Annealed flexible metal hoses are annealed for stress relief. Their return forces will be lower than in the case of an unannealed flexible metal hose. If annealed flexible metal hoses are frequently bent, they will no longer be low-stress. The bend radius will therefore be the same as for an unannealed flexible metal hose.

q Thin-walled flexible metal hoses are highly flexible as a result of their thin walls

q Braided flexible metal hoses are not as sensitive to external mechanical effects. They have a greater return force when bent.

Bellows can assume both motions as well as vibrations. They are ins-talled in tubing in order to equalize misalignment or to compensate for thermal expansion. Bellows assume relative motions between system components. Their compressed configuration (R-profile) makes them highly flexible.

Edge-welded bellows are fabricated from individual, welded disks and can achieve large axial motions in a short physical space. Due to the stiffness of the individual disks, lateral misalignment is only possible in the case of a relatively large number of disks or diaphragm pairs. In other words, diaphragm pairs will form the shape of S.

Please observe the following information in planning and designing your vacuum system:

q Safeguard the bellows against mechanical damage during and after installation

q Do not transfer any torsion to the bellows during installation or operation

q When evacuating flexible connectors, the ambient air pressure will produce a Force F at the ends, causing compression:

BF p A= ∆ ⋅

p∆ = Pressure differential

( )2 2i a

B

d dA

8

π += = Effective bellows cross section

i ad ,d = Inside and outside bellows diameter

q This is opposed by the spring force of the bellows, which results from the spring rate and longitudinal change. Considerable forces will be produced, especially in connection with larger nominal dia-meters; these forces will act as tensile forces on the mating flanges of the flexible component.

q When using flexible elements, the resulting forces must therefore be taken into consideration and compensated for if necessary.

q The pressures indicated in connection with the following product descriptions are absolute pressures, at an ambient pressure of 1000 mbar.

q The highest and lowest permissible temperatures in the entire system will be governed by the lowest high temperature and the highest low temperature of the components involved. At tempe-ratures in excess of 20°C, the minimum bend radii will increase and the minimum motion will decrease.


q The flange connections and components have been developed in order to achieve vacuum-tight connections. They can only assume mechanical loads to a minimum extent. In designing a vacuum system, it will therefore be necessary to review whether static or dynamic loads will have to be assumed by additional elements, e.g. holders.


254 Catalog 2010

ISO-KF


Stainless Steel: Flange 304/1.4301; Bellow 316L

ISO-KF Corrugated Hose, Flexible

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Min. Bend Radius, Static [mm]

Min. Bend Radius,

Dynamic [mm]

Maximum Pressure

[bar]Item No. Price €

10 250 10,2 15,9 17 100 2,5 120SWN010-0250 45,00

10 500 10,2 15,9 17 100 2,5 120SWN010-0500 50,00

10 750 10,2 15,9 17 100 2,5 120SWN010-0750 55,00

10 1000 10,2 15,9 17 100 2,5 120SWN010-1000 65,00

10 1500 10,2 15,9 17 100 2,5 120SWN010-1500 90,00

10 2000 10,2 15,9 17 100 2,5 120SWN010-2000 120,00

16 250 15,9 22,8 26 140 2,5 120SWN016-0250 45,00

16 500 15,9 22,8 26 140 2,5 120SWN016-0500 50,00

16 750 15,9 22,8 26 140 2,5 120SWN016-0750 55,00

16 1000 15,9 22,8 26 140 2,5 120SWN016-1000 60,00

16 1500 15,9 22,8 26 140 2,5 120SWN016-1500 80,00

16 2000 15,9 22,8 26 140 2,5 120SWN016-2000 90,00

25 250 25,1 33 38 180 2,5 120SWN025-0250 51,00

25 500 25,1 33 38 180 2,5 120SWN025-0500 57,00

25 750 25,1 33 38 180 2,5 120SWN025-0750 63,00

25 1000 25,1 33 38 180 2,5 120SWN025-1000 69,00

25 1500 25,1 33 38 180 2,5 120SWN025-1500 90,00

25 2000 25,1 33 38 180 2,5 120SWN025-2000 100,00

40 250 40,7 52 59 240 1,8 120SWN040-0250 66,00

40 500 40,7 52 59 240 1,8 120SWN040-0500 72,50

40 750 40,7 52 59 240 1,8 120SWN040-0750 79,00

40 1000 40,7 52 59 240 1,8 120SWN040-1000 85,50

40 1500 40,7 52 59 240 1,8 120SWN040-1500 110,00

40 2000 40,7 52 59 240 1,8 120SWN040-2000 122,00

50 250 49,9 63 72 280 1,8 120SWN050-0250 88,00

50 500 49,9 63 72 280 1,8 120SWN050-0500 100,00

50 750 49,9 63 72 280 1,8 120SWN050-0750 112,00

50 1000 49,9 63 72 280 1,8 120SWN050-1000 123,00

50 1500 49,9 63 72 280 1,8 120SWN050-1500 141,50

50 2000 49,9 63 72 280 1,8 120SWN050-2000 163,50

A

ØB

ØC

q Flange connection length: 15 mmq Operating temperature: -196 to 300 °C*q Pressure range: to 10-7 mbarq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar*Please observe limits for seal materials and fastening elements


Catalog 2010 255

ISO-KF



ISO-KF Corrugated Hose, Flexible, Annealed

Flange Size [DN]

A [mm]

B [mm]

C [mm]


Maximum Pressure


10 250 10,2 15,9 17 2,5 120SWG010-0250 53,00

10 500 10,2 15,9 17 2,5 120SWG010-0500 55,00

10 750 10,2 15,9 17 2,5 120SWG010-0750 60,00

10 1000 10,2 15,9 17 2,5 120SWG010-1000 72,00

16 250 15,9 22,8 26 2,5 120SWG016-0250 50,00

16 500 15,9 22,8 26 2,5 120SWG016-0500 55,00

16 750 15,9 22,8 26 2,5 120SWG016-0750 60,00

16 1000 15,9 22,8 26 2,5 120SWG016-1000 65,00

25 250 25,1 33 38 2,5 120SWG025-0250 56,00

25 500 25,1 33 38 2,5 120SWG025-0500 62,00

25 750 25,1 33 38 2,5 120SWG025-0750 68,00

25 1000 25,1 33 38 2,5 120SWG025-1000 74,00

40 250 40,7 52 59 1,8 120SWG040-0250 71,00

40 500 40,7 52 59 1,8 120SWG040-0500 78,00

40 750 40,7 52 59 1,8 120SWG040-0750 84,00

40 1000 40,7 52 59 1,8 120SWG040-1000 90,00

50 250 49,9 63 72 1,8 120SWG050-0250 98,00

50 500 49,9 63 72 1,8 120SWG050-0500 110,00

50 750 49,9 63 72 1,8 120SWG050-0750 122,00

50 1000 49,9 63 72 1,8 120SWG050-1000 133,00

A

ØB

ØC

q Flange connection length: 15 mmq Operating temperature: -196 to 300 °C*

q Pressure range: to 10-7 mbarq Stress relieved; low reset force when bentq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar*Please observe limits for seal materials and fastening elements


256 Catalog 2010

ISO-KF



ISO-KF Corrugated Hose, Highly Flexible, Thin-wallq Flange connection length: 15 mmq Operating temperature: -196 to 300 °C*

q Pressure range: to 10-7 mbarq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar*Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B [mm]

C [mm]


Min. Bend Radius,

Dynamic [mm]

Maximum Pressure


16 250 15,9 26 26 105 2,5 120SWD016-0250 50,00

16 500 15,9 26 26 105 2,5 120SWD016-0500 55,00

16 750 15,9 26 26 105 2,5 120SWD016-0750 60,00

16 1000 15,9 26 26 105 2,5 120SWD016-1000 65,00

16 1500 15,9 26 26 105 2,5 120SWD016-1500 80,00

16 2000 15,9 26 26 105 2,5 120SWD016-2000 100,00

25 250 25 37 38 135 2,5 120SWD025-0250 56,00

25 500 25 37 38 135 2,5 120SWD025-0500 62,00

25 750 25 37 38 135 2,5 120SWD025-0750 68,00

25 1000 25 37 38 135 2,5 120SWD025-1000 74,00

25 1500 25 37 38 135 2,5 120SWD025-1500 90,00

25 2000 25 37 38 135 2,5 120SWD025-2000 110,00

40 250 40,5 55,5 59 180 1,5 120SWD040-0250 71,00

40 500 40,5 55,5 59 180 1,5 120SWD040-0500 78,00

40 750 40,5 55,5 59 180 1,5 120SWD040-0750 84,00

40 1000 40,5 55,5 59 180 1,5 120SWD040-1000 90,00

40 1500 40,5 55,5 59 180 1,5 120SWD040-1500 110,00

40 2000 40,5 55,5 59 180 1,5 120SWD040-2000 135,00

50 250 49,7 66,5 72 210 1,5 120SWD050-0250 98,00

50 500 49,7 66,5 72 210 1,5 120SWD050-0500 110,00

50 750 49,7 66,5 72 210 1,5 120SWD050-0750 122,00

50 1000 49,7 66,5 72 210 1,5 120SWD050-1000 133,00

50 1500 49,7 66,5 72 210 1,5 120SWD050-1500 160,00

50 2000 49,7 66,5 72 210 1,5 120SWD050-2000 180,00

A

ØB

ØC


Catalog 2010 257

ISO-KF


Stainless Steel: Flange and Braided Sheath 304/1.4301; Bellow 316L

ISO-KF Corrugated Hose, Sheathedq Operating temperature: -196 to 300 °C*

q Pressure range: 10-7 mbar to 2.5 barq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar*Please observe limits for seal materials and fastening elements

Flange Size [DN]

A [mm]

B [mm]

C [mm]


Min. Bend Radius,

Dynamic [mm]

Maximum Pressure


10 250 10,2 18,0 29 100 2,5 120SWU010-0250 80,00

10 500 10,2 18,0 29 100 2,5 120SWU010-0500 95,00

10 750 10,2 18,0 29 100 2,5 120SWU010-0750 110,00

10 1000 10,2 18,0 29 100 2,5 120SWU010-1000 125,00

16 250 15,9 24,9 44 140 2,5 120SWU016-0250 80,00

16 500 15,9 24,9 44 140 2,5 120SWU016-0500 95,00

16 750 15,9 24,9 44 140 2,5 120SWU016-0750 110,00

16 1000 15,9 24,9 44 140 2,5 120SWU016-1000 125,00

25 250 25,1 35,1 64 180 2,5 120SWU025-0250 100,00

25 500 25,1 35,1 64 180 2,5 120SWU025-0500 115,00

25 750 25,1 35,1 64 180 2,5 120SWU025-0750 130,00

25 1000 25,1 35,1 64 180 2,5 120SWU025-1000 145,00

40 250 40,7 54,7 98 240 2,5 120SWU040-0250 125,00

40 500 40,7 54,7 98 240 2,5 120SWU040-0500 140,00

40 750 40,7 54,7 98 240 2,5 120SWU040-0750 155,00

40 1000 40,7 54,7 98 240 2,5 120SWU040-1000 170,00

50 250 49,9 65,7 120 280 2,5 120SWU050-0250 145,00

50 500 49,9 65,7 120 280 2,5 120SWU050-0500 165,00

50 750 49,9 65,7 120 280 2,5 120SWU050-0750 185,00

50 1000 49,9 65,7 120 280 2,5 120SWU050-1000 205,00

A

ØB

ØC


258 Catalog 2010

ISO-KF



ISO-KF Spring Bellow with Weld Endsq Flange connection length: 15 mmq Weld end wall thickness: 2 mmq Pressure range: 10-7 mbar to 1 barq Operating pressure (absolute): 1 bar to 10-6 mbarq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles

A

ØD

ØB

ØC

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Axial Travel [mm]

Item No. Price €

16 60 16 25,9 20 ±3 170SFA016-060 90,00

16 90 16 25,9 20 ±7 170SFA016-090 90,00

25 60 24 39 28 ±5 170SFA025-060 105,00

25 120 24 39 28 ±15 170SFA025-120 110,00

40 60 40,5 58,3 44,5 ±5,5 170SFA040-060 120,00

40 120 40,5 58,3 44,5 ±16,5 170SFA040-120 130,00

50 60 50 69,3 54 ±6,5 170SFA050-060 145,00

50 120 50 69,3 54 ±19,5 170SFA050-120 165,00


Catalog 2010 259

ISO-KF



ISO-KF Spring Bellowq Flange connection length: 15 mmq Operating temperature: -196 to 300 °Cq Pressure range: 10-7 mbar to 2.5 barq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles

ØC

A

ØB

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Axial Travel [mm]

Item No. Price €

16 60 16,1 25,9 ±3,5 170SFK016-060 56,00

16 70 16,1 25,9 ±5 170SFK016-070 56,00

16 75 16,1 25,9 ±5,5 170SFK016-075 56,00

16 90 16,1 25,9 ±7 170SFK016-090 56,00

16 100 16,1 25,9 ±8 170SFK016-100 56,00

16 120 16,1 25,9 ±11 170SFK016-120 55,70

25 60 25,3 39 ±5 170SFK025-060 66,00

25 80 25,3 39 ±8 170SFK025-080 66,00

25 90 25,3 39 ±10 170SFK025-090 66,00

25 100 25,3 39 ±11,5 170SFK025-100 66,00

25 120 25,3 39 ±15,5 170SFK025-120 66,00

40 60 41 58,3 ±5,5 170SFK040-060 70,00

40 80 41 58,3 ±9 170SFK040-080 70,00

40 100 41 58,3 ±13 170SFK040-100 70,00

40 120 41 58,3 ±17 170SFK040-120 70,00

40 150 41 58,3 ±22 170SFK040-150 90,00

50 60 50,2 69,3 ±6,5 170SFK050-060 95,00

50 100 50,2 69,3 ±15 170SFK050-100 95,00

50 120 50,2 69,3 ±20 170SFK050-120 95,00


260 Catalog 2010

ISO-KF



ISO-KF Diaphragm Bellowsq Operating temperature: -196 to 300 °C*q Pressure range: 10-7 mbar to 1 barq Custom sizes and lengths available upon requestq Diaphragm bellows are typically designed for specific requirements. For an individual quote, please provide the following information: - Open diameter - Installation length - Axial and/or lateral and/or angular travel - Number of load cycles - Operating temperature - Pressure, internal and external - Connecting endsSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles

Plastic, CR

ISO-KF CR Sleeveq Operating temperature: -40 to 120 °Cq Pressure range: 10-5 mbar to 1 barq Connecting elements: See „Adapter for PVC Hose“ and „Hose Clamp“Specifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

20 44 17 44 12 130SMA020 37,00

28 50 25 50 15 130SMA028 68,00

45 56 44 68 18 130SMA045 66,00

ØB

A

ØC

D D

ØC

A

ØB

Flange Size [DN]

A [mm] B

[mm]C


Neutral Compressed Extended

16 40 32,5 44 16 31,5 120SFM016-10 200.00

16 52 37 60 16 31,5 120SFM016-20 250.00

16 64 41,5 76 16 31,5 120SFM016-30 300.00

25 46 32,5 51,5 26 46 120SFM025-10 250.00

25 64 37 75 26 46 120SFM025-20 310.00

25 82 41,5 98,5 26 46 120SFM025-30 375.00

40 50 35 55 39 59 120SFM040-10 500.00

40 70 40 80 39 59 120SFM040-20 550.00

40 90 45 105 39 59 120SFM040-30 580.00

50 61 42 68 51 76 120SFM050-10 580.00

50 85 47 99 51 76 120SFM050-20 640.00

50 109 52 130 51 76 120SFM050-30 730.00


Catalog 2010 261

ISO-KF


PVC with Stainless Steel Flange, 304/1.4301

PVC

ISO-KF PVC Hose with Embedded Spring and Flanges

ISO-KF PVC Hose with Embedded Spring

q Operating temperature: -10 to 60 °Cq Pressure range: 10-4 mbar to 1 barq Inner tube: PVC, transparentq Casing: Steel coilq Hose cover: PVC, transparentq Smooth inner and outer wallsq Custom lengths available on requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

q Operating temperature: -10 to 60 °Cq Pressure range: 10-4 mbar to 1 barq Inner tube material: PVC, transparentq Casing: Steel coilq Hose cover material: PVC, transparentq Smooth inner and outer wallsq Connecting elements: See „Adapter for PVC Hose“ and „Hose Clamp“q Length: Up to 50 m (164 ft); min. order: 1 m; orders > 1 m calculated pro rataSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Bend Radius [mm]

Item No. Price €

16 500 12 3,1 22,2 30 100SPA016-0500 52,00

16 1000 12 3,1 22,2 30 100SPA016-1000 56,00

25 500 21 4 33 50 100SPA025-0500 56,00

25 1000 21 4 33 50 100SPA025-1000 61,00

40 500 40 4,9 54,8 90 100SPA040-0500 70,00

40 1000 40 4,9 54,8 90 100SPA040-1000 78,00

50 500 45 5,9 61,8 100 100SPA050-0500 98,00

50 1000 45 5,9 61,8 100 100SPA050-1000 110,00

Flange Size [DN]

A [mm]

B [mm]

Bend Radius [mm]

Max. Pressure [mbar]

Item No. Price per Meter [ €]

16 16 3,1 30 15 100SPM016 7,00

25 25 4 50 11 100SPM025 9,00

40 45 4,9 90 7 100SPM040 15,00

50 50 5,9 100 7 100SPM050 25,00

A

ØB

C

ØD

ØA

B


262 Catalog 2010

ISO-KF




ISO-KF Adapter for PVC Hose

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Artikel Nr. Preis €

16 28 16 12 110ASP016-16 14,50

25 28 16 12 110ASP025-16 16,00

25 40 25 21 110ASP025-25 16,00

40 32 45 40 110ASP040-45 17,50

50 60 50 45 110ASP050-50 25,50

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 28 16 12 120ASP016-16 18,00

25 28 16 12 120ASP025-16 20,00

25 28 25 21 120ASP025-25 20,00

40 32 45 40 120ASP040-45 22,00

50 60 50 45 120ASP050-50 32,00

A

BØC

q For connecting PVC tubing with embedded springq Fastener: See „Hose Clamp“q Please check the hose inner diameter before ordering

Aluminum EN AW-6061

ISO-KF 90° Elbow with Hose Adapter

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 40 40 17 13 110ASR016 28,00

25 50 50 26,5 22 110ASR025 38,00

40 65 65 40 37 110ASR040 48,00

A

B

ØD

ØC

q For connecting a PVC hose or CR sleeveq Fastener: See „Hose Clamp“q Please check the hose inner diameter before ordering


ISO-KF Hose Clampq Temperature range: 0 to 100 °Cq 2 pieces per pkg.

Flange Size [DN]

A = Maximum Ø [mm]

B = Minimum Ø [mm]

Item No. Price €

16 22 12 150SSS016 2,00

25 32 20 150SSS025 2,50

40 50 35 150SSS040 3,00

50 60 40 150SSS050 6,00

A-B


Catalog 2010 263

ISO-KF


Rubber

ISO-KF Rubber Hoseq Temperature range: -30 to 85 °Cq Pressure range: 10-4 mbar to 1 barq For vacuum applicationsq Custom lengths available upon req.; min. order: 1 m; orders > 1 m calculated pro rataSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 17 7 130SPM010 14,00

16 25 10 130SPM016 24,00

20 32 16 130SPM020 32,00

ØB

ØA



ISO-KF Hose Connector

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 40 12 8 110ASC010-12 7,50

10 40 8 4 110ASC010-8 7,50

16 40 12 8 110ASC016-12 7,50

16 40 8 4 110ASC016-8 7,50

25 40 12 8 110ASC025-12 9,50

25 40 8 4 110ASC025-8 9,50

40 40 12 8 110ASC040-12 15,00

40 40 8 4 110ASC040-8 15,00

50 40 12 8 110ASC050-12 21,00

50 40 8 4 110ASC050-8 21,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

10 40 12 8 120ASC010-12 12,00

10 40 8 4 120ASC010-8 12,00

16 40 12 8 120ASC016-12 12,00

16 40 8 4 120ASC016-8 12,00

A

ØC

ØB

q Fastener: See „Hose Clamp“Aluminumq Temperatur range: -196 to 150°CStainless Steelq Temperature range: -196 to 300 °C (304/1.4301), -196 to 350 °C (316L/1.4404)*Plasticq Temperature range: -20 to 80 °C**Please observe limits for seal materials and fastening elements


264 Catalog 2010

ISO-KF



[DN]A

[mm]B

[mm]C


16 40 12 8 130ASC016-12 12,00

25 40 12 8 130ASC025-12 13,00

40 40 12 8 130ASC040-12 18,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

25 40 12 8 120ASC025-12 12,00

25 40 16 12 120ASC025-16 12,00

25 40 20 16 120ASC025-20 12,00

25 40 8 4 120ASC025-8 12,00

40 40 12 8 120ASC040-12 16,00

40 40 16 12 120ASC040-16 16,00

40 40 20 16 120ASC040-20 16,00

40 40 25 20 120ASC040-25 16,00

40 40 8 4 120ASC040-8 16,00

50 40 12 8 120ASC050-12 28,00

50 40 8 4 120ASC050-8 28,00

ISO-KF Hose Connector, Stainless Steel 304/1.14301


Catalog 2010 265

ISO-K



ISO-K Corrugated Hose, Flexible

Flange Size [DN]

A [mm]

B [mm]

C [mm]


Min. Bend Radius,

Dynamic [mm]

Maximum Pressure


63 250 65 80 90 330 1,7 320SWN063-0250 155,00

63 500 65 80 90 330 1,7 320SWN063-0500 185,00

63 750 65 80 90 330 1,7 320SWN063-0750 215,00

63 1000 65 80 90 330 1,7 320SWN063-1000 245,00

63 1500 65 80 90 330 1,7 320SWN063-1500 310,00

100 250 100,1 119 131 530 1,3 320SWN100-0250 215,00

100 500 100,1 119 131 530 1,3 320SWN100-0500 255,00

100 750 100,1 119 131 530 1,3 320SWN100-0750 295,00

100 1000 100,1 119 131 530 1,3 320SWN100-1000 335,00

160 250 150,4 173,2 216 1050 1,1 320SWN160-0250 425,00

160 500 150,4 173,2 216 1050 1,1 320SWN160-0500 465,00

160 750 150,4 173,2 216 1050 1,1 320SWN160-0750 505,00

160 1000 150,4 173,2 216 1050 1,1 320SWN160-1000 545,00Ø

B

A

ØC

q Flange connection length: 30 mmq Operating temperature: -200 to 300 °Cq Pressure range: to 10-7 mbarq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar


266 Catalog 2010

ISO-K



ISO-K Corrugated Hose, Flexible, Annealed

Flange Size [DN]

A [mm]

B [mm]

C [mm]


Maximum Pressure


63 250 65 80 90 1,7 320SWG063-0250 165,00

63 500 65 80 90 1,7 320SWG063-0500 195,00

63 750 65 80 90 1,7 320SWG063-0750 225,00

63 1000 65 80 90 1,7 320SWG063-1000 255,00

100 250 100,1 119 131 1,3 320SWG100-0250 230,00

100 500 100,1 119 131 1,3 320SWG100-0500 270,00

100 750 100,1 119 131 1,3 320SWG100-0750 310,00

100 1000 100,1 119 131 1,3 320SWG100-1000 350,00

160 250 150,4 173,2 216 1,1 320SWG160-0250 445,00

160 500 150,4 173,2 216 1,1 320SWG160-0500 485,00

160 750 150,4 173,2 216 1,1 320SWG160-0750 525,00

160 1000 150,4 173,2 216 1,1 320SWG160-1000 565,00

q Flange connection length: 30 mmq Operating temperature: -196 to 300 °Cq Pressure range: to 10-7 mbarq Stress relieved; low reset force when bentq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar


ISO-K Spring Bellow with Weld Endsq Custom lengths available upon requestq Operating temperature: -196 to 350 °Cq Absolute pressure: 10-4 to 1 mbarq Weld end wall thickness: 3 mmSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Axial Travel [mm]

Item No. Price €

63 130 65,1 86,9 76 ±15 370SFA063 220,00

80 130 79,9 104,3 88,9 ±10 370SFA080 250,00

100 130 100,1 127,2 108 ±15 370SFA100 260,00

ØB

A

ØC

A

ØD

ØC

ØB


Catalog 2010 267

ISO-K



ISO-K Spring Bellowq Flange connection length: 30 mmq Operating temperature: -196 to 300 °Cq Pressure range: 10-6 mbar to 1 barq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Axial Travel [mm]

Item No. Price €

63 130 65,1 86,9 ±15 320SFK063-130 150,00

63 150 65,1 86,9 ±20 320SFK063-150 165,00

80 130 79,9 104,3 ±10 320SFK080-130 185,00

80 150 79,9 104,3 ±13 320SFK080-150 195,00

100 130 100,1 127,2 ±15 320SFK100-130 185,00

100 150 100,1 127,2 ±20 320SFK100-150 195,00

160 150 150,2 183,8 ±13 320SFK160-150 305,00

160 220 150,2 183,8 ±23 320SFK160-220 325,00

200 220 200,7 235 ±20 320SFK200-220 695,00

250 220 250,6 285 ±23 320SFK250-220 1000,00

320 220 317,9 368 ±25 320SFK320-220 1850,00

ØB

ØC

A


268 Catalog 2010

ISO-K



ISO-K Diaphragm Bellows

Plastic, CR

ISO-K CR Sleeveq Operating temperature: -40 to 120 °Cq Pressure range: 10-5 mbar to 1 barq Connecting elements: See „Flange with Sleeve Coupling“ and „Hose Clamp“Specifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

63 65 75 115 20 330SMA063 79,00

100 72 106 160 16 330SMA100 95,00

160 75 156 218 16 330SMA160 115,00

ØB

A

ØC

D D

ØC

A

ØB

Flange Size [DN]

A [mm] B

[mm]C


Neutral Compressed Extended

63 104 85 113 65 90 320SFM063-10 820.00

63 128 90 146 65 90 320SFM063-20 910.00

63 152 95 179 65 90 320SFM063-30 1000.00

100 106 86 117 102 132 320SFM100-10 850.00

100 132 92 154 102 132 320SFM100-20 940.00

100 158 98 191 102 132 320SFM100-30 1180.00

160 106 87,5 121,5 150 185 320SFM160-10 1790.00

160 132 95 163 150 185 320SFM160-20 1990.00

160 158 102,5 204,5 150 185 320SFM160-30 2250.00

200 118 95,5 130,5 200 235 320SFM200-10 2230.00

200 148 103 173 200 235 320SFM200-20 2610.00

200 178 110,5 215,5 200 235 320SFM200-30 2990.00

250 120 96 128 250 285 320SFM250-10 2620.00

250 152 104 168 250 285 320SFM250-20 3100.00

250 184 112 208 250 285 320SFM250-30 3590.00

q Operating temperature: -196 to 300 °Cq Pressure range: 10-7 mbar to 1 barq Custom sizes and lengths available upon requestq Diaphragm bellows are typically designed for specific requirements. For an individual quote, please provide the following information: - Open diameter - Installation length - Axial and/or lateral and/or angular travel - Number of load cycles - Operating temperature - Pressure, internal and external - Connecting endsSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles


Catalog 2010 269

ISO-K


PVC with Stainless Steel Flange 304/1.4301

ISO-K PVC Hose with Embedded Spring and Flangesq Operating temperature: -10 to 60 °Cq Pressure range: 10-4 mbar to 1 barq Inner tube material: PVC, transparentq Casing: Steel coilq Hose cover material: PVC, transparentq Smooth inner and outer wallsq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Bend Radius [mm]

Item No. Price €

63 500 70 7,3 89,6 150 300SPA063-0500 155,00

63 1000 70 7,3 89,6 150 300SPA063-1000 190,00

100 500 95 8,5 117 200 300SPA100-0500 205,00

100 1000 95 8,5 117 200 300SPA100-1000 235,00

A

ØB

C

ØD

q For connecting a PVC hose with embedded spring (100SPM)q Fastener: see „Hose Clamp“


ISO-K Flange with PVC Hose Adapter

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 50 70 76,1 320ASP063 65,00

100 50 95 101,6 320ASP100 100,00

A

B C

Aluminum EN AW-6082

ISO-K Flange with Sleeve Couplingq For connecting a CR sleeve (330SMA)q Fastener: see „Hose Clamp“

A

ØB

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

63 51 76 310FMA063 115,00

100 56 108 310FMA100 200,00

160 56 159 310FMA160 250,00


270 Catalog 2010

ISO-K


PVC

ISO-K PVC Hose with Embedded Spring

Flange Size [DN]

A [mm]

B [mm]

Bend Radius [mm]

Max. Pressure [bar]

Item No. Price €

63 75 7,3 150 4 330SPM063 90,00

100 100 8,5 200 3 330SPM100 110,00

ØA

B


ISO-K Hose Clampq Temperature range: 0 to 100°Cq 2 pieces per pkg.

A-B

Flange Size [DN]

A = Maximum Ø [mm]

B = Minimum Ø [mm]

Item No. Price €

63 90 70 350SSS063 5,00

100 130 110 350SSS100 10,00

160 175 160 350SSS160 15,00

q Operating temperature: -10 to 60 °Cq Pressure range: 10-4 mbar to 1 barq Inner tube material: PVC, transparentq Casing: Steel coilq Hose cover material: PVC, transparentq Smooth inner and outer wallsq Connecting elements: See „Adapter for PVC Hose“ and „Hose Clamp“q Length: Up to 50 m (164 ft); min. order: 1 m; orders > 1 m calculated pro rataSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar


Catalog 2010 271

CF


Stainless Steel: Flange 304L; Bellow 316L

ISO-CF Corrugated Hose, Flexibleq Operating temperature: -196 to 350 °Cq Pressure range: 10-9 mbar to 1 barq One flange rotatableq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C and an ambient pressure of 1000 mbar

ØB

A

ØC

Flange Size [DN]

A [mm]

B [mm]

C [mm]


Min. Bend Radius, Dynamic


16 250 15,9 22,8 26 140 420SWN016-0250 105,00

16 500 15,9 22,8 26 140 420SWN016-0500 115,00

16 750 15,9 22,8 26 140 420SWN016-0750 125,00

16 1000 15,9 22,8 26 140 420SWN016-1000 135,00

40 250 40,5 52 59 240 420SWN040-0250 145,00

40 500 40,5 52 59 240 420SWN040-0500 160,00

40 750 40,5 52 59 240 420SWN040-0750 175,00

40 1000 40,5 52 59 240 420SWN040-1000 190,00

63 250 65 80 90 330 420SWN063-0250 270,00

63 500 65 80 90 330 420SWN063-0500 310,00

63 750 65 80 90 330 420SWN063-0750 340,00

63 1000 65 80 90 330 420SWN063-1000 360,00

100 250 100,1 119 131 530 420SWN100-0250 420,00

100 500 100,1 119 131 530 420SWN100-0500 460,00

100 750 100,1 119 131 530 420SWN100-0750 510,00

100 1000 100,1 119 131 530 420SWN100-1000 550,00


272 Catalog 2010

CF


Flange Size [DN]

A [mm]

B [mm]

C [mm]

Axial Travel [mm]

Item No. Price €

16 110 16 25,9 ±5 420SFK016-110 130,00

40 160 37 58,3 ±10 420SFK040-160 165,00

63 250 66 86,9 ±24 420SFK063-250 370,00

100 250 100 127,2 ±22 420SFK100-250 515,00

160 270 155 183,8 ±15 420SFK160-270 720,00


ISO-CF Spring Bellowq Operating temperature: -196 to 350 °Cq Pressure range: 10-10 mbar to 1 barq Min. operating pressure (absolute): 10-12 to 1000 mbarq Bellows material: Stainless steel 316L q One flange rotatableq Custom lengths available upon requestSpecifications applicable for an ambient temperature of 20 °C, an ambient pressure of 1000 mbar and 10,000 load cycles

ØB

ØC

A

NOTES

NOTES

Glass Components

Glass Components


Viewports

ISO-KF Glass Blank Flange ..........................................279

ISO-KF Viewport, Borosilicate Glass ............................279

ISO-KF Viewport, Sapphire .........................................280

ISO-KF Viewport, Fused Silica .....................................280

ISO-KF Flange with Glass Dome .................................280

ISO-K Viewport ..........................................................281

ISO-F Viewport ...........................................................282

CF Viewport ...............................................................283

CF Shutter, Manual .....................................................284

CF Shutter, Pneumatic ................................................284

Optical Glass

Viewport Retainer for Optical Glasses ........................285

Borosilicate (Borofloat®)..............................................286

Fused Silica (Synthetic Amorphous Quartz) .................286

Quartz ........................................................................286

Calcium Fluoride .........................................................287

Magnesium Fluoride ...................................................287

Sapphire .....................................................................287

Zinc Selenide ..............................................................288

Cleartran™ (Zinc Sulfide) ............................................288

Germanium ................................................................288

Silicon .........................................................................289

Contents

Glass Components


Glass Components

Glass components should be installed in accordance with the instruc-tions for the series of flanges being used. Please observe the informa-tion contained in the product descriptions of the glass elements rela-ting to the appropriate clamping elements or seals. Viewports with CF flanges should be installed with annealed copper seals or elastomer seals in order to minimize stresses. Please additionally observe the heat-up and cool-down rates. Temperature differentials within the glass or between the flange and the glass will result in stresses that could damage the glass. Avoid temperature gradients.

Glasses

Selection of the correct glass will depend upon ambient conditions and the requirements of your application. Although viewports are mainly used to visually observe processes, they can also serve to transfer electromagnetic waves. The following should be observed in connection with their transmission:

q Surface reflection: Avoid by means of antireflective coatings for the corresponding wavelength range

q Alignment of the source of light relative to the surface of the glass (incidence angle)

q Glass thickness: Thinner glasses result in less absorption This is usually relevant only at the envelope of the transmission curve. However the thickness of the selected glass must enable it to withstand the pressure differential within the application temperature range

q Optical quality: Fewer inclusions and flaws increase transmission and reduce light scatter

General transmission curves often take into consideration only the type of glass, sometimes the mating surfaces, rarely the thickness of the glass and never the actual quality of the individual production lot. The illustration below offers an overview of the transmission ranges for these types of glasses. Also indicated are the wavelengths for several types of lasers. This overview will serve as an initial criterion in selec-ting the correct type of glass.

The transmission curves that are contained in this chapter take into consideration the type of glass, reflection at the surfaces given a per-pendicular light incidence. They are provided for general orientation purposes and do not correspond exactly to the indicated glasses.

TRINOS offers glass retainers in diameters of 1” and 2”. They are em-ployed for mounting our optical glasses, and are also suitable for glas-ses from other suppliers (assure sufficient thickness of the glass!).

Reflection

Disturbed Structure

Clean StructureGla

ss T

hick

ness

Glass Components


Chem. Composition Trade NameTrans mission

[µm]Temperature

[°C]Properties, Applications

B2O

3 SiO

2 a.o. Borosilicate:

KodialBK-7

Borofloat ®

0,35 – 2 350 q Application: Standard viewport material in visible rangeq Limited transmission in UV rangeq Very temperature-sensitive, low coefficient of thermal expansion q Chemically resistant

ZnS Cleartran™ 0,5 – 15 200 q Application: IR spectroscopyq Highly fracture resistant

Al2O

3Sapphire 0,5 – 4,5 350 q High hardness

q Low refractive indexq Vacuum viewportsq UV or IR, depending upon chemical composition

Ge Germanium 2 – 15 120 q Applications: Bandpass filters, windows, lenses, FIR (Far Infrared) optics, ATR (Attenuated Total Reflection) crystalq High refractive index – antireflective coatings advisable

CaF2

Calcium Fluoride 0,2 – 6 200 q Anwendung: IR-, UV, VUV (Vakuum UltraViolett)-Laser, IR Analytik

ZnSe Zinc Selenide 0,7 – 15 200 q Applications: CO2 laser optics, IR range

Si Silicon 1,1 – 6 120 q Applications: Lenses, bandpass filters, ATR crystal, IR range

SiO2

SiO2

Quartz

Synthetic Quartz(Fused Silica)

0,2 – 2,5

0,25 – 2

350

200

q Applications: VUV filters, excimer lasers, polarization optics, FIR windows, UV range

MgF Magnesium Fluoride 0,2 – 5,5 200 q Applications: VUV optics, excimer lasers, polarization optics

SiO2Pb Lead Glass - - q Shielding against x-ray radiation

Coatings

When entering and leaving, a portion of the light is reflected from the glass surface, thus reducing the transmission rate. Antireflective (AR) coatings can be provided to increase the transmission rate. A distinction is made in this connection between a broadband coating for a range of wavelengths and a coating for a specific wavelength. Typical AR coatings include:

q Ultraviolet (UV-AR): 248 – 400 nmq Visible range (VIS-AR): 400 – 750 nmq Near infrared (NIR-AR): 725 – 1050 nmq Laser wavelength (e.g. YAG-AR): 1064 nm

TRINOS offers a VIS-AR coating for many products that are made from borosilicate. We would be pleased to offer you further coatings upon request.

Gaskets

UHV-tight connections for CF viewports are implemented by means of a glass-to-metal adapter. The standard viewport of Kodial (boro-silicate) is welded to the stainless steel flange by means of a Kovar lip. Kovar is a ferromagnetic cobalt-iron-nickel alloy whose thermal expansion is similar to that of Kodial glass. This produces only low stresses in the glass-to-metal transition during heat-up. Fused silica and sapphire glasses are soldered to stainless steel flanges. To keep stresses to a minimum when mounting, TRINOS recommends the use of soft-annealed copper gaskets or elastomer gaskets only. Moreover, care must be taken to assure homogeneous thermal distribution du-ring heat-up and cool-down.

Elastomer gaskets for ISO-KF and ISO-K flanges are temperature resis-tant to approx. 150°C, which means they offer only limited suitability for the UHV range. As a result of their elastic deformation, they cause only minimum stresses in the glass panes.

Please observe the following information in planning and designing your vacuum system:

q The pressures indicated in this chapter in connection with the product descriptions are absolute pressures. They are valid for a temperature of 20°C and an ambient pressure of 1000 mbar.

q The highest and lowest permissible temperatures in the entire system will be governed by the lowest high temperature and the highest low temperature of the components involved.


Glass Components

Catalog 2010 279

Viewports


ISO-KF Viewport, Borosilicate Glassq Pressure range: 10-7 mbar to 1.5 barq Temperature range: -15 to 150 °Cq Heating/cooling rate: Max. 5 K/minq Aluminum frame with integrated FPM O-ring; install without additional seal q Item no. suffix -AR: Antireflective coating for the visible spectrumq Circumferential rim for outer centering on the ISO-KF counterflangeq Not suitable for installation with claw clamps or bulkheads clamps

Aluminum/Borosilicate

Aluminum/Borosilicate, Antireflective Coating for 450-750 nm

Ø A

B

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

25 26 10 110GSG025 85,00

40 41 10 110GSG040 90,00

50 52 10 110GSG050 105,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

25 26 10 110GSG025-AR 175,00

40 41 10 110GSG040-AR 190,00

50 52 10 110GSG050-AR 220,00

ISO-KF Glass Blank Flange

Borosilicate Ø A

B

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 30 5 160FBL016 30,00

25 40 5 160FBL025 34,00

40 55 5 160FBL040 38,00

50 75 5 160FBL050 50,00

QuartzFlange Size

[DN]A

[mm]B


16 30 5 180FBL016 80,00

25 40 5 180FBL025 140,00

40 55 5 180FBL040 220,00

50 75 5 180FBL050 245,00

q Installation with outer centering ring and elastomer sealq Fastening elements: Chain clamps and clamping rings made of plastic (contact between glass and metal must be prevented)q Pressure range: 10-7 mbar to 1.5 bar*q Temperature ranges: Borosilicate: -15 to 150 °C; quartz: -15 to 200 °C*q Heating/cooling rate: Max. 5 K/min*Please observe limits for seal materials and fastening elements

Glass Components

280 Catalog 2010

Viewports


ISO-KF Viewport, Sapphire

ISO-KF Viewport, Fused Silica

q Pressure range: 10-7 mbar to 1.5 barq Temperature range: -100 to 350 °Cq Heating/cooling rate: Max. 5 K/minq Stainless steel frame; glass solderedq Sapphire: Transmission in IR spectrum to 4500 nm

q Pressure range: 10-7 mbar to 1.5 barq Temperature range: -100 to 200 °Cq Heating/cooling rate: Max. 5 K/min (heat/cool homogenously)q Stainless steel frame; glass solderedq Fused silica: Transmission in UV spectrum to 200 nm

Stainless Steel/Sapphire

Stainless Steel/Fused Silica, UV

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

16 15 12,7 120GSG016-saphir 260,00

40 24 13 120GSG040-saphir 305,00

50 17,5 12,7 120GSG050-saphir 315,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

25 16 9,9 120GSG025-silica-uv 260,00

40 36 13,7 120GSG040-silica-uv 260,00

50 36 15,7 120GSG050-silica-uv 315,00

ISO-KF Flange with Glass Domeq Bakeable up to 200 °C q Heating/cooling rate: Max. 5 K/min

Stainless Steel A

ØBC

Ø A

B

Ø A

B

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 30 11 30 120GSF016 121,00

25 30 17 40 120GSF025 124,00

40 50 37 55 120GSF040 158,00

50 50 37 75 120GSF050 165,00

Glass Components

Catalog 2010 281

Viewports


ISO-K Viewportq Pressure range: 10-7 mbar to 1.5 bar; DN 200: to 1 barq Operating temperature: -15 to 150 °C; DN 200: to 60 °Cq Stainless steel frame with integrated FPM O-ring; install without additional seal q Item no. suffix -AR: Antireflective coating for the visible spectrumq Circumferential rim for outer centering on the ISO-K counterflange (not suitable for installation with ISO-F flanges)q Not suitable for installation with claw clampsq Heating/cooling rate: Max. 1 K/min

Stainless Steel/Borosilicate

Stainless Steel/Borosilicate, Antireflective Coating for 450-750 nm

Stainless Steel/Quartz

Ø A

Flange Size [DN]

A [mm]

Item No. Price €

63 72 322GSG063 125,00

100 104 322GSG100 180,00

160 153 322GSG160 320,00

200 210 322GSG200 440,00

Flange Size [DN]

A [mm]

Item No. Price €

63 72 322GSG063-AR 440,00

100 104 322GSG100-AR 590,00

160 153 322GSG160-AR 980,00

200 210 322GSG200-AR 1880,00

Flange Size [DN]

A [mm]

Item No. Price €

100 104 322GSG100-silica 550,00

Glass Components

282 Catalog 2010

Viewports


ISO-F Viewportq Pressure range: 10-7 mbar to 1.5 barq Temperature range: -15 to 150 °Cq Heating/cooling rate: Max. 3 K/minq Item no. suffix -AR: Antireflective coating for the visible spectrumq Operating temperature: -15 to 150 °C; DN 200: to 60 °Cq Suitable for mounting on a base plateq Bore holes with countersink for screw headsq Screws not included

Stainless Steel/Borosilicate

Stainless Steel/Borosilicate, Antireflective Coating for 400-700 nm

Stainless Steel/Quartz

B

C

Ø A

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 72 12 6,5 522GSG063 210,00

100 104 12 6,5 522GSG100 300,00

160 153 16 9,5 522GSG160 430,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 72 12 6,5 522GSG063-AR 515,00

100 104 12 6,5 522GSG100-AR 730,00

160 153 16 9,5 522GSG160-AR 1170,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

100 104 12 6,5 522GSG100-silica 690,00

For tapped blind hole on base plate

Flange Size[DN]

Qty. Thread[mm]

63 4 M8 x 16

100 8 M8 x 16

160 8 M10 x 20

For ISO-F Flange each with washer and nut

Flange Size[DN]

Qty. Thread[mm]

63 4 M8 x 30

100 8 M8 x 30

160 8 M10 x 40

q we recommend the following screws: Hexagon socket with low head (DIN 7984), nickel plated steel 8.8 or silver platad stainless steelq Before assembling in tapped blind hole always verify screw length

Glass Components

Catalog 2010 283

Viewports


CF Viewport

q Pressure range: 10-11 mbar to 1 bar q Temperature ranges: Kodial glass (borosilicate) and sapphire: to 350 °C; fused silica: to 200 °C q Heating/cooling rates: Kodial glass: max. 3 K/min; sapphire and fused silica: max. 5 K/minq Item no. suffix -AR: Antireflective coating for the visible spectrumq Item no. suffix -PB: Lead glass for x-ray protection; glass thickness: 5 mm; provides the same protection as 1.5 mm of lead at 100 kV or 1 mm at 200 kV.

Please use annealed copper gaskets or elastomer seals to minimize stress inside the glass.

Stainless Steel/Kodial

Stainless Steel/Kodial, Antireflective Coating for 450-750 nm

Stainless Steel/Kodial/Lead Glass

Ø A

Flange Size [DN]

A [mm]

Item No. Price €

16 16 420GSG016 95,00

40 33 420GSG040 85,00

63 63 420GSG063 130,00

100 89 420GSG100 275,00

160 135 420GSG160 435,00

200 135 420GSG200 595,00

Flange Size [DN]

A [mm]

Item No. Price €

16 16 420GSG016-AR 230,00

40 33 420GSG040-AR 260,00

63 63 420GSG063-AR 395,00

100 89 420GSG100-AR 745,00

160 135 420GSG160-AR 895,00

Flange Size [DN]

A [mm]

Item No. Price €

16 16 420GSG016-PB 145,00

40 33 420GSG040-PB 165,00

63 63 420GSG063-PB 295,00

100 89 420GSG100-PB 515,00

160 135 420GSG160-PB 980,00

Stainless Steel/SapphireFlange Size

[DN]A


16 15 420GSG016-saphir 260,00

40 24 420GSG040-saphir 305,00

63 49 420GSG063-saphir 910,00

Glass Components

284 Catalog 2010

Viewports


CF Viewport, Stainless Steel/Fused Silica, UVFlange Size

[DN]A


16 16 420GSG016-silica-uv 230,00

40 36 420GSG040-silica-uv 250,00

63 68 420GSG063-silica-uv 810,00

100 99 420GSG100-silica-uv 1000,00

160 137 420GSG160-silica-uv 2970,00

200 198 420GSG200-silica-uv 3850,00

CF Shutter, Manual

CF Shutter, Pneumatic

q Suitable for UHV q Bellows-sealed feedthroughq Bakeable to 250 °C

q Suitable for UHV q Bellows-sealed feedthroughq Bakeable to 250 °Cq Pneumatically operated; double actionq Pneumatic drive up to 60 °C

AD

B

C

A

D

B

C

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

40 152 22 31 42 420MBL040 1290,00

63 171 37 53 42 420MBL063 1360,00

100 186 65 91 42 420MBL100 1490,00

160 212 111 124 42 420MBL160 1550,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

40 201 22 31 55 420MBL040-p 1500,00

63 221 37 53 55 420MBL063-p 1650,00

100 236 65 91 55 420MBL100-p 1700,00

160 262 111 124 55 420MBL160-p 1950,00

Stainless Steel

Stainless Steel

Glass Components

Catalog 2010 285Bestell-Hotline: 0551/99963-0

Optical Glass


KF Flange with Viewport Retainer

Ø C

Ø A

Ø B

ISO-K Flange with Viewport Retainer

CF Flange with Viewport Retainer

Viewport Retainer for Optical Glasses

q Pressure range: 10-7 mbar to 1.5 bar*q Temperature range: -15 to 150 °C* q Simple replacement of glassesq Face wrench includedq Glass not included*Please observe limits for glasses, seal materials and fastening elements

Weld Adapter with Viewport RetainerFlange Size

[DN]A

[mm]B

from...to [mm]C

[mm]Thickness

from...to [mm]Item No. Price €

25 38 24,8...25,8 16 3...7 GAG025 115,00

50 70 49,8...51 40 3,8...8 GAG050 160,00

Flange Size [DN]

A [mm]

B from...to [mm]

C [mm]

Thickness from...to [mm]

Item No. Price €

40 55 24,8...25,8 16 3...7 120GAG040-25 205,00

Flange Size [DN]

A [mm]

B from...to [mm]

C [mm]


Item No. Price €

63 95 49,8...51 40 3,8...8 320GAG063-50 290,00

Flange Size [DN]

A [mm]

B from...to [mm]

C [mm]


Item No. Price €

40 69,9 24,8...25,8 16 3...7 420GAG040-25 210,00

63 113,5 49,8...51 40 3,8...8 420GAG063-50 310,00

Ø A

Ø C

Ø B

Ø C

Ø A

Ø B

Ø A

Ø C

Ø B

These retainers can be used for vacuum-tight installation of 1“ (24.8 to 25.8 mm) or 2“ (49.8 to 51 mm) plates. These are the standard sizes offered by many manufacturers are available in any quality. TRINOS carries a wide range of the most commonly used optical glasses in stock (see the following pages for details).

Glass Components

286 Catalog 2010

Optical Glass


Borosilicate (Borofloat®)

q Transmission range: 0.35 to 2 µm q Extremely temperature-resistent; low thermal expansion coefficientq Up to 350 °C

Float glass solidifies on a tin cast with a smooth surface and generally does not require polishing.

Glass Ø [mm]

Glass Thickness [mm]

Item No. Price €

25,4 3,8 GSG025-Boroflo 25,00

50,8 5,5 GSG050-Boroflo 55,00

Fused Silica (Synthetic Amorphous Quartz)q Transmission range: 0.2 to 2 µm q Parallelism: 3 arc minutesq Planarity: 1 wavelength at 633 nmq Surface quality: 40/20 scratch-digq Up to 350 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-Silica-UV 140,00

50,8 5 GSG050-Silica-UV 150,00

Quartzq Transmission range: 0.2 to 2.5 µm q Parallelism: 3 arc minutesq Planarity: 1 wavelength at 633 µmq Surface quality: 40/20 scratch-digq c-cut: c-axis parallel to optical axisq Up to 350 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-Quarz 300,00

50,8 5 GSG050-Quarz 705,00Transmission curves are shown as general guidelines only and may not correspond exactly to the glasses.

Transmission curves are shown as general guidelines only and may not correspond exactly to the glasses.


Glass Components


Optical Glass


Calcium Fluorideq Transmission range: 0.2 to 6 µm q Softer and thus in some cases thicker than other glasses in our product rangeq Parallelism: 3 arc minutesq Planarity: 2 wavelengths at 633 nmq Surface quality: 40/20 scratch-dig q Up to 200 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-CaF2 180,00

50,8 5 GSG050-CaF2 275,00

Magnesium Fluorideq Transmission range: 0.2 to 5.5 µm q Parallelism: 3 arc minutesq Planity: 2 wavelengths at 633 nmq Surface quality: 40/20 scratch-digq Up to 200 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-MgF2 320,00

50,8 5 GSG050-MgF2 695,00

Sapphireq Transmission range: 0.5 to 4.5 µm q High hardnessq Low refractive indexq Parallelism: 3 arc minutesq Planarity: 2 wavelengths at 633 µm q Surface quality: 60/40 scratch-digq Up to 350 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-Saphir 185,00

50,8 5 GSG050-Saphir 555,00




Glass Components

288 Catalog 2010

Optical Glass


Zinc Selenideq Transmission range: 0.7 to 15 µm q Parallelism: 3 arc minutesq Planarity: 1/20 wavelength at 10.6 µmq Surface quality: 60/40 scratch-digq Up to 200 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-ZnSe 345,00

50,8 5 GSG050-ZnSe 580,00

Cleartran™ (Zinc Sulfide)q Transmission range: 0.5 to 15 µm q High fracture strengthq Parallelism: 3 arc minutesq Planarity: 1/20 wavelength at 10.6 µmq Surface quality: 60/40 scratch-dig q Up to 200 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-Cleartran 315,00

50,8 5 GSG050-Cleartran 610,00

Germaniumq Transmission range: 2 to 15 µm q High refraction index; antireflective coating recommendedq Parallelism: 3 arc minutesq Planarity: 1/10 wavelength at 10.6 µmq Surface quality: 40/20 scratch-dig q Up to 120 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-Ge 160,00

50,8 5 GSG050-Ge 635,00Transmission curves are shown as general guidelines only and may not correspond exactly to the glasses.



Glass Components


Optical Glass


Siliconq Transmission range: 1.1 to 6 µm q Parallelism: 3 arc minutesq Planarity: 2 wavelengths at 633 nmq Surface quality: 40/20 scratch-digq Up to 120 °C

Glass Ø [mm]


Item No. Price €

25,4 3 GSG025-Si 155,00

50,8 5 GSG050-Si 425,00Transmission curves are shown as general guidelines only and may not correspond exactly to the glasses.

NOTES

Valves

Valves


Angle valves, Manual

Angle Valve from SMC, Manual ..................................295

Angle Valve from SMC, Manual, CF Flange ................296

Angle Valve from VAT®, All-metal, Manual .................296

Angle Valve, Type 1, Manual ......................................297

Angle Valve, Type 2, Manual ......................................297

Angle Valves, Pneumatic

Angle Valve from SMC, Pneumatic .............................298

Angle Valve from SMC, Pneumatic, FPM/FKM Shaft Seal ..................................................299

Angle Valve from SMC, Pneumatic, up to 150 °C ......300

Angle Valve from SMC, Pneumatic, Softpump ...........301

Angle Valve from SMC, Pneumatic, Softpump, up to 150 °C .............................................................302

Angle Valve, Type 1, Pneumatic ..................................303

Angle Valve, Type 2, Pneumatic ..................................304

In-line Valves

In-line Valve from SMC, Manual .................................306

In-line Valve, Type 1, Manual ......................................307

Diaphragm Valve from VAT®, Manual .........................308

Butterfly Valve, Manual ..............................................308

Butterfly Valve, Manual, ISO-F ....................................309

3-way Butterfly Valve, Manual ....................................309

In-line Valve from SMC, Pneumatic ............................310

In-line Valve, Type 1, Pneumatic .................................310

Angle Valves, Solenoid

Angle Valve from SMC, Solenoid ................................305

Venting Valves

Venting Valve, Manual ...............................................311

Venting Valve from SMC, Solenoid .............................311

Smooth-Vent Venting Valve from SMC, Pneumatic ..................................................................312

Gate Valves

UHV Gate Valve, Manual ............................................314

UHV Gate Valve, Pneumatic .......................................314

HV Gate Valve from VAT®, Aluminum .........................315

UHV Gate Valve from VAT®, Stainless Steel .................316

Rectangular Gate Valve from SMC, Pneumatic ...........317

Ball Valves

Ball Valve, Manual ......................................................318

Ball Valve, 3-way, Manual ...........................................319

Ball Valve, Pneumatic .................................................320

Ball Valve, 3-way, Pneumatic ......................................321

Ball Valve, High Vacuum .............................................322

Overpressure Valves

Pressure Relief Valve ...................................................313

Burst Disk ...................................................................313

Pneumatic Accessories

Control Valve from SMC .............................................323

Position Sender from SMC ..........................................324

Position Sender from SMC, High Temperature ............325

Contents

Valves


Valves

SEALS AND SEALING MECHANISMS

A distinction is made between internal and external leakage rates. The internal leakage rate indicates the sealing effect at the closed valve disk. The external leakage rate describes the sealing effect of the housing against atmospheric pressure. While the external leakage rate can be minimized to a UHV-suitable level by means of metallic seals and bellows, internal sealing is usually performed with elastomers.

Elastomer seals in the form of o-rings are the seals most fre-quently used in valves. In these valves, the bakeout temperature will be governed by the type of elastomer on the valve disk (usually FKM) and the actuation mode. Their outstanding chemical proper-ties and their good permeation and outgassing properties make FKM-sealed valves UHV-suitable if accurately handled.

Diaphragm seals are fabricated either from elastomers such as FKM as well as from stainless steel. Their operating principle remains the same: The periphery of the diaphragm is attached to the valve body, while the center is connected with the movable diaphragm disk. A valve lift that is arched in the direction of flow contacts the compressed diaphragm, thus blocking the flow. Elas-tomer seals are excellently suited for applications in medium to high vacuum and for temperatures of up to around 100°C.

Metallic seals do not contain any elastomers and are UHV-com-patible. They can be baked out at up to 300°C and can be used in vacuums of up to 10-11 mbar.

ACTUATION SYSTEMS

Manual valves with handwheel or lever are typically suitable for high temperatures of up to 150°C in the basic version. Their temperature resistance is not limited by electronic components or sensitive leads, but by the seal.

Pneumatic valves require a 4- to 7-bar supply of oil-free com-pressed air to perform the cycling operation. The typical standard is “normally closed.” However double-action pneumatic cylinders are also employed. A small control valve in the compressed air supply line is electrically actuated in accordance with your specifications by means of a voltage. The control valve can be seated directly on the valve or can be located in a valve cluster in a central control system. A magnet in the pneumatic cylinder enables electrical sen-

sors to be activated and serve as a position indicator for the open or closed positions. TRINOS supplies control valves and position indicators as accessories for various valves.

Solenoid valves are opened directly by means of an electromag-net. Their cycling capacity limits their potential applications to small diameters of up to 25 mm.

VALVE TYPES

Angle or inline valves typically operate with a bellows serving as the external seal. An edge-wel-ded bellows or other spring mechanism provides the linear motion of the valve disk against the housing, with the bellows being sealed off against the housing by means of a static elastomer seal. A different design employs a sliding elastomer ring on a plunger as the external seal; while this provides only little sealing effect, it does afford rapid cycling. These valves operate at high differential pres-sures of up to over 1 bar and can be employed as backing vacuum “switches” or to open a bypass to the main chamber. The inline ver-sions have somewhat better gas conductivities. Diaphragm valves operate in accordance with a similar principle, but have lower gas conductivities. The number of cycles to first maintenance will differ significantly depending upon the quality in question.

Ball valves are very robust and can even cycle differential pres-sures of several bars. Cost-effective KF versions have leakage rates of 10-6 mbar l/s and a temperature resistance of only 80°C. The large, heavy-duty version can be employed in the HV range for tem-peratures of up to 150°C. Three-way ball valves serve as manifolds, however they are not free of cross-contamination (i.e. gases can mix during cycling).

Gate valves are built for high or ultra high vacuum. They are very low in height, have a large opening and good conductivities. They open at only a low differen-tial pressure of around 30 mbar and are employed in load-locks or upstream of pumps. In addition to the cost-effective gate valves from Asian manufacturers, the TRINOS line also includes UHV gate valves from VAT. Rectangular gate valves are employed in the se-miconductor industry and are designed for inch-size wafer diameters.

TRINOS offers numerous different types of valves. Factors that define the field of application include the process itself, the process temperature, the ultimate vacuum to be achieved or the composition of the gas.SMC vacuum valves are especially high quality products that are manufactured in Japan by the world market leader in air and vacuum systems. Our product portfolio is supplemented by inline valves, gate valves, ball valves and numerous specialty valves.

Valves


Qualities and Materials for Angle ValvesNominal Diameters Manual…150°C Pneumatic…60°C, High-temp…150°C Solenoid…40°C

ISO-KFDN16 – DN50

SMC Stainless steelType 1Type 2

SMC AluminumSMC Aluminum (Soft Pump)SMC Stainless steelSMC High-temperatureType 1Type 2

SMC (DN16 and DN25)

ISO-KDN63 – DN160

Type 1 SMC AluminumSMC Aluminum (Soft Pump)SMC Stainless steel

CFDN16 – DN160

SMC Stainless steel SMC Stainless steel

Butterfly valves close by pivoting a disk perpendicular to the passageway. The high vacuum version is employed upstream of the turbopump in order to regulate gas flows in the downstream mode by varying the cross sectional areas. With a constant gas inlet, it is possible to main-tain a constant gas pressure; the most accurate way to accomplish this is automatically with a pressure sensor, electronic control unit and self-learning algorithm.

Metering or needle valves zinterposed between gas line and chamber enable a low gas flow to be set. Automated versions are employed for upstream regulating situations. TRINOS supplies two-stage valves with “Soft Pump” needle valve for gentle venting.

Specialty valves include further types of valves, e.g. tube valves from quality brand Swagelok, as well as units for venting or over-pressure relief.

Valves

Catalog 2010 295

Angle Valves, Manual


Aluminum

Stainless Steel

Angle Valve from SMC, Manualq Temperature range: 5 to 150 °C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Cycles to first maintenance: 100,000q Leakage rate: 1.3 x 10-9 mbar l/s (without permeation)q Cleaned and packaged suitable for cleanroom useq Visible position indicatorq Options: Other seal materials; aluminum housing version: Heater to prevent vapor condensation q Data sheet: See www.trinos.com

A

A

B

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Weight [kg]

Iem No. Price €

16 KF 40 102 5 0,23 110V-XLH-16 290,00

25 KF 50 114 14 0,41 110V-XLH-25 300,00

40 KF 65 163 45 1,05 110V-XLH-40 445,00

50 KF 70 178 80 1,62 110V-XLH-50 540,00

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Weight [kg]

Iem No. Price €

16 KF 40 102 5 0,31 120V-XMH-16 310,00

25 KF 50 114 14 0,57 120V-XMH-25 355,00

40 KF 65 163 45 1,35 120V-XMH-40 470,00

50 KF 70 180 80 2,02 120V-XMH-50 630,00

A

AB

Valves

296 Catalog 2010



A

AB

SW

Stainless Steel

All Metal, Stainless Steel

Accessory: Handwheel

Angle Valve from SMC, Manual, CF Flangeq Temperature range: 5 to 150 °C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Leakage rate: 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 100,000q Cleaned and packaged suitable for cleanroom useq Visible position indicatorq Options: Other seal materials q Data sheet: See www.trinos.com

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Weight [kg]

Item No. Price €

16 CF 40 102 5 0,37 420V-XMH-16C 410,00

40 CF 65 163 45 1,76 420V-XMH-40C 640,00

Angle Valve from VAT®, All-metal, Manual

q Easy-Close all-metal sealed valveq Manual operation with hexagon head, optional handwheel for DN 16 and 40 q Closes to stop, no torque wrench required q Temperature range: Up to 300°C; temperature ramps: < 60°C/hq Leakage rate: <5 x 10-10 mbar l/s q UHV pressure range: Up to 2 bar (abs.) q Differential opening pressure: 1 bar q Cycles: >1000q Both CF flanges rotatableq Valve position visible

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Wrench Size [mm]

Item No. Price €

16 CF 38 104 5 0,4 10 420VEC016 860,00

40 CF 63 133 50 2,2 10 420VEC040 910,00

63 CF 105 246 105 6,2 22 420VEC063 2450,00

Flange Size [DN]

Item No. Price €

16 + 40 420VEC000-H 40,00

A

AB

The economically priced Easy-Close series from VAT® entirely eliminates the need for elastomers and is suitable for extreme UHV. The FELX VARTRING seal system operates with a metallic seal of stainless steel in the valve plate, which is shaped solely through elasticity.

Valves

Catalog 2010 297



D

C

A

A

B

E

Aluminum

Stainless Steel

Angle Valve, Type 1, Manualq Type 1: Economically priced valve made in Germanyq Bellows-sealed valve q Pressure range: 1 x 10-8 mbar to 3 bar q Temperature range: -30 to 130 °C q Seal material: FPM; rotary knob: plasticq Cycles to first maintenance: 50,000q Valve position indicated by rotary knobq Valve plate: Approx. 4 to 7 turns to open

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Conduct. [l/s]

Item No. Price €

16 KF 40 103 41 8 46 5 110VEM016-1 160,00

25 KF 50 131 51 12 57 13 110VEM025-1 190,00

40 KF 65 161 70 20 70 40 110VEM040-1 260,00

50 KF 70 170 80 20 85 63 110VEM050-1 370,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Conduct. [l/s]

Item No. Price €

16 KF 40 103 41 8 46 5 120VEM016-1 285,00

25 KF 50 131 55 12 57 13 120VEM025-1 325,00

40 KF 65 161 70 20 70 40 120VEM040-1 420,00

A

AB

Stainless Steel

Angle Valve, Type 2, Manualq Type 2: Economically priced valve made in Asiaq Stainless steel, diaphram-bellows sealed (AM350) q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Temperature range: Up to 150 °C q Valve plate seal: FPM (fluororubber)q Leakage rate: 2 x 10-9 mbar l/s q Cycles to first maintenance: 150,000

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Item No. Price €

16 KF 40 141,5 4 120VEM016-2 215,00

25 KF 50 148,1 7 120VEM025-2 220,00

40 KF 65 200 26 120VEM040-2 340,00

50 KF 70 235 29 120VEM050-2 430,00

Valves

298 Catalog 2010



Aluminum

Angle Valve from SMC, Pneumaticq Temperature range: 5 to 60°C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Leakage rate: 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 2,000,000q Cleaned and packaged suitable for cleanroom useq Pneumatics: Normally closedq Visible position indicator, equipped for position sender (see SMC accessories) q Options: Other seal materials; aluminum housing: Heater to prevent vapor condensation, double-action pneumatics, integral control valveq Data sheet: See www.trinos.com

A

A

B

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Closing Time [ms]

Pneumatic Connection

Item No. Price €

16 KF 40 103 5 0,25 <100 M5 110V-XLA-16G-M9 230,00

25 KF 50 113 14 0,45 <120 M5 110V-XLA-25G-M9 275,00

40 KF 65 158 45 1,1 <500 R1/8“ 110V-XLA-40G-M9 335,00

50 KF 70 170 80 1,6 <650 R1/8“ 110V-XLA-50G-M9 440,00

Stainless Steel

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Closing Time [ms]


Item No. Price €

16 KF 40 103 5 0,33 <100 M5 120V-XMA-16G-M9 350,00

25 KF 50 113 14 0.61 <120 M5 120V-XMA-25G-M9 375,00

40 KF 65 158 45 1,4 <500 R1/8“ 120V-XMA-40G-M9 530,00

50 KF 70 170 80 2,0 <650 R1/8“ 120V-XMA-50G-M9 660,00

63 ISO-K 88 196 160 3,6 <850 R1/8“ 320V-XMA-63DG-M9 1150,00

80 ISO-K 90 235 200 6,2 <1050 R1/8“ 320V-XMA-80DG-M9 2000,00

A

A

B

Stainless Steel with CF FlangeFlange Size

[DN]A

[mm]B

[mm]Conduct.

[l/s]Weight

[kg]Closing Time

[ms]Pneumatic Connection

Item No. Price €

16 CF 40 103 5 0,33 <100 M5 420V-XMA-16CG-M9 420,00

40 CF 65 158 45 1,4 <500 R1/8“ 420V-XMA-40CG-M9 680,00

63 CF 88 196 160 3,6 <850 R1/8“ 420V-XMA-63CG-M9 1100,00

A

A

B

Valves

Catalog 2010 299



Aluminum

Angle Valve from SMC, Pneumatic, FPM/FKM Shaft Seal

q Temperature range: 5 to 60 °C q Pressure range: 1 x 10-7 mbar to 1 bar (abs.) q Shaft seal: FPM O-ring, fluorinated vacuum greaseq Valve plate seal: FPM (fluororubber)q Leakage rat:e 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 2,000,000; DN 100/DN 160: 1,000,000q Pneumatics: Normally closedq Visible position indicator, equipped for position sender (see SMC accessories)q Options: High temperature versions for up to 150 °C, other seal materials; aluminum housing: Heater to prevent vapor condensation, double-action pneumatics, integral control valve q Data sheet: See www.trinos.com

The valve plate shaft glides through a seal of FPM O-rings. This design is more robust than bellows-sealed designs for use with high gas flows, and switching times are approximately 10 times faster. Shaft-seal surface treatment and lubrication with vacuum grease greatly reduces particulate wear. The very large DN 100 and DN 160 sizes are available as standard products; however, these have a lower pressure range than bellows-sealed valves.

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Closing Time [ms]

Item No. Price €

16 KF 40 103 5 0,25 <35 110V-XLF-16G-M9 280,00

25 KF 50 113 14 0.45 <40 110V-XLF-25G-M9 295,00

40 KF 65 158 45 1.1 <50 110V-XLF-40G-M9 420,00

50 KF 70 170 80 1.6 <55 110V-XLF-50G-M9 510,00

63 ISO-K 88 196 160 3,0 <70 310V-XLF-63DG-M9 875,00

100 ISO-K 108 300 300 10,0 - 310V-XLF-100DG-M9 1850,00

160 ISO-K 138 315 800 18,0 - 310V-XLF-160DG-M9 2870,00

A

A

B

Valves

300 Catalog 2010



Aluminum

Stainless Steel

Angle Valve from SMC, Pneumatic, up to 150 °C

q Temperature range: 5 to 150 °C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Leakage rate: 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 2,000,000q Cleaned and packaged suitable for cleanroom use q Pneumatics: Normally closedq Visible position indicator, equipped for standard and high-temperature position senders (see SMC accessories). q Options: Other seal materials; aluminum housing: Heater to protect against vapor condensation, double-action pneumaticsq Data sheet: See www.trinos.com

These high-temperature (HT) valves are distinguished from standard valves by their HT pneumatics, HT magnets in the position sender and an additional installation slot for HT position senders. Since control valves are not generally HT-resistant, they should not be attached directly to the valve body.

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Closing Time [ms]

Pneumatic Connection Item No. Price €

16 KF 40 103 5 0,25 <100 M5 110V-XLA-16GH0-F7 525,00

25 KF 50 113 14 0,45 <120 M5 110V-XLA-25GH0-F7 470,00

40 KF 65 158 45 1,1 <500 R1/8“ 110V-XLA-40GH0-F7 630,00

50 KF 70 170 80 1,6 <650 R1/8“ 110V-XLA-50GH0-F7 550,00

63 ISO-K 88 196 160 2,9 <850 R1/8“ 310V-XLA-63DGH0-F7 875,00

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Closing Time [ms]


16 KF 40 103 5 0,33 <100 M5 120V-XMA-16GH0-F7 640,00

25 KF 50 113 14 0.61 <120 M5 120V-XMA-25GH0-F7 645,00

40 KF 65 158 45 1,4 <500 R1/8“ 120V-XMA-40GH0-F7 745,00

50 KF 70 170 80 2,0 <650 R1/8“ 120V-XMA-50GH0-F7 990,00

63 ISO-K 88 196 160 3,6 <850 R1/8“ 320V-XMA-63DGH0-F7 1085,00

16 CF 40 103 5 0,33 <100 M5 420V-XMA-16CGH0-F7 750,00

40 CF 65 158 45 1,4 <500 R1/8“ 420V-XMA-40CGH0-F7 840,00

63 CF 88 196 160 3,6 <850 R1/8“ 420V-XMA-63CGH0-F7 1230,00

A

A

B

Valves

Catalog 2010 301



Aluminum

Angle Valve from SMC, Pneumatic, Softpump

Acessories: Control Valve Cable SY100

q Temperature range: 5 to 50 °C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Leakage rate 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 2,000,000q Cleaned and packaged suitable for cleanroom use q Pneumatics: Normally closed; 24V with overvoltage protectionq Two integral control valves; electrical connections for two SY100 control valves (see pneumatic accessories) q Equipped for position sender on primary valve (see SMC accessories) q Options: Heater to prevent vapor condensation, double-action pneumaticsq Data sheet: See www.trinos.com

Softpump or Smooth Exhaust valves consist of two pneumatic valves incorporated in one component: a primary valve with the indicated flange size and a smaller valve with adjustable port for „soft“ pump-down. The latter can prevent both turbulence, which could otherwise stir up particulate matter, and pump overload. Because the small size of these valves does not permit use of standard control valves, this series is equipped with two integral control valves.

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Bypass Conduct. [l/s]


25 KF 50 123 14 0,5 - 3 M5 110V-XLDV-25L-M9-5LOZ 660,00

40 KF 65 170 45 2 - 8 M5 110V-XLDV-40L-M9-5LOZ 835,00

50 KF 70 183 80 2,5 - 11 M5 110V-XLDV-50L-M9-5LOZ 935,00

63 ISO-K 88 217 160 4 - 18 M5 310V-XLDV-63DL-M9-5LOZ 1300,00

80 ISO-K 90 256 200 4 - 18 M5 310V-XLDV-80DL-M9-5LOZ 1750,00

Length[mm]

Item No. Price €

1 900P-SY100-68-A10 6,00

2 900P-SY100-68-A20 7,50

3 900P-SY100-68-A30 9,00

5 900P-SY100-68-A50 18,00

A

A

B

Plug SY100 with 2 wired cable, other cable head open

Valves

302 Catalog 2010



Angle Valve from SMC, Pneumatic, Softpump, up to 150 °C

q High temperature (HT) range: Up to 150 °Cq Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Leakage rate 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 2,000,000q Cleaned and packaged suitable for cleanroom use q Pneumatics: Normally closedq HT series: Without control valve; two pneumatic inletsq Equipped for position sender on primary valve (see SMC accessories) q Options: Heater to prevent vapor condensation, double-action pneumatics q Data sheet: See www.trinos.com

Softpump or Smooth Exhaust valves consist of two pneumatic valves incorporated in one component: a primary valve with the indicated flange size and a smaller valve with adjustable port for „soft“ pump-down. The latter can prevent both turbulence, which could otherwise stir up particulate matter, and pump overload. The small size of these valves does not permit use of standard control valves. Since control valves are not designed for 150 °C, this high-temperature version in stainless steel comes standard with no control valve. Please use external control valves. Position senders up to 150 °C: See pneumatic accessories.

Stainless Steel, HT 150 °CFlange Size

[DN]A

[mm]B

[mm]Conduct.

[l/s]Bypass Conduct.

[l/s]Pneumatic Connection

Item No. Price €

25 KF 50 123 14 0,5 - 3 2x M5 120V-XMD-25LH0-F7 990,00

40 KF 65 170 45 2 - 8 2x R1/8“ 120V-XMD-40LH0-F7 1250,00

63 KF 88 217 160 4 - 18 2x R1/8“ 320V-XMD-63DLH0-F7 1400,00

A

A

B

Valves

Catalog 2010 303



Angle Valve, Type 1, Pneumaticq Type 1: Economically priced valve made in Germanyq Bellows-sealed valve with pneumatic drive q Pressure range: 1 x 10-8 mbar to 3 bar q Seal material: FPMq Pneumatics: Normally closed (NC), 4 to 8 bar compressed air q Cycles to first maintenance: 1,000,000q Compatible control valve: V-SS-16-25-24 DC or ~230 V AC; see pneumatic accessoriesq Optional: Position sender, normally open (NO) control valve

A

AB

Flange Size [DN]

A [mm]

B [mm]

Closing Time [s]

Conductance [l/s]

Item No. Price €

16 KF 40 103 0,10 5 110VEP016-1 230,00

25 KF 50 131 0,20 13 110VEP025-1 275,00

40 KF 65 161 0,30 40 110VEP040-1 395,00

Flange Size [DN]

A [mm]

B [mm]

Closing Time [s]

Conductance [l/s]

Item No. Price €

16 KF 40 103 0,10 5 120VEP016-1 365,00

25 KF 50 131 0,20 13 120VEP025-1 415,00

40 KF 65 161 0,30 40 120VEP040-1 500,00

Aluminum

Stainless Steel

Valves

304 Catalog 2010



A

AB

Stainless Steel

Angle Valve, Type 2, Pneumatic

q Stainless steel, diaphragm bellows-sealed (AM350) q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Valve plate seal: FPM (fluororubber)q Leakage rate: 2 x 10-9 mbar l/s q Cycles to first maintenance: 500,000q Pneumatics 4 to 6.5 bar, NPT 1/8“ connectionq Normally closedq Compatible control valve: V-SM-xxxxx, R1/8“ connection adapter and 6 mm hose connection

Type 2: Economically priced valve made in Asia

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Item No. Price €

16 KF 40 142 4 120VEP016-2 285,00

25 KF 50 149 7 120VEP025-2 290,00

40 KF 65 203 26 120VEP040-2 410,00

50 KF 70 246 29 120VEP050-2 530,00

Valves

Catalog 2010 305

Angle Valves, Solenoid


Aluminum

Angle Valve from SMC, Solenoid

q Temperature range: 5 to 40 °C q Pressure range: 1 x 10-8 mbar to 2 bar (abs.); gas flow direction is arbitrary q Bellows-sealed (Spring Bellow 316L, particle-free)q Valve plate seal: FPM (fluororubber)q Leakage rate: 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 500,000q Cleaned and packaged suitable for cleanroom use q Normally closed; opened by solenoidq Connection: DIN connector with screw contacts q Options: Other seal materials, voltage-reduction circuitry q Data sheet: See www.trinos.com

These valves are switched solely by electromagnetic forces. In the currentless state, a spring keeps the valve plate closed up to an overpressure of 1 bar. A coil lifts a magnet to open the valve. Switching capacity: approximately 47 W at 24 V. The supply voltage should be reduced to a 6 V holding level after approximately 0.2 second in order to prevent overheating.

A

A

B

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Weight [kg]

Item No. Price €

16 KF 40 113 5 0,4 110V-XLS-16-5D 360,00

25 KF 50 138,5 8 0,7 110V-XLS-25-5D 370,00

Valves

306 Catalog 2010

In-line Valves


In-line Valve from SMC, Manual

q Temperature range: 5 to 150 °C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L)q Valve plate seal: FPM (fluororubber)q Leakage rate 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 100,000q Cleaned and packaged suitable for cleanroom useq Visible position indicatorq Options: Other seal materialsq Data sheet: See www.trinos.com

Manual in-line valves from SMC are available only in stainless steel and only with KF flanges

Flange Size [DN]

A [mm]

B [mm]

Conductance [l/s]

Weight [kg]

Item No. Price €

25 KF 102 76 14 0,62 120V-XYH-25 420,00

40 KF 130 102 45 1,37 120V-XYH-40 600,00

50 KF 178 119 80 2,42 120V-XYH-50 770,00

Stainless Steel A

B

Valves

Catalog 2010 307

In-line Valves


In-line Valve, Type 1, Manualq Bellows-sealed valve q Pressure range: 1 x 10-8 mbar to 3 barq Temperature range: -30 to 130 °C q Valve plate seal: FPM (fluororubber)q Cycles to first maintenance: 50,000q Valve position indicated by rotary knobq Valve plate: Approx. 4 to 7 turns to open

Aluminum

Stainless Steel

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Conduct. [l/s]

Item No. Price €

16 KF 70 103 20 8 46 5 110VDM016-1 230,00

25 KF 80 131 23 12 57 13 110VDM025-1 270,00

40 KF 110 161 34 20 70 40 110VDM040-1 390,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Conduct. [l/s]

Item No. Price €

16 KF 70 103 20 8 46 5 120VDM016-1 390,00

25 KF 80 131 23 12 57 13 120VDM025-1 455,00

D

A

CB

E

Valves

308 Catalog 2010

In-line Valves


Aluminum

Stainless Steel

Diaphragm Valve from VAT®, Manualq Pressure range: 1 x 10-7 mbar to 5 bar q Average conductanceq Temperature: Up to 100 °C media temperature, 50 °C on handwheelq Valve plate seal: FPM (fluororubber)q Materials: Aluminum/FPM/plasticq Cycles to first maintenance: 100,000

AluminumFlange Size

[DN]A

[mm]B

[mm]Conductance

[l/s]Item No. Price €

16 KF 52 66.5 2 110VME016 155,00

25 KF 80 111 5 110VME025 245,00

40 KF 105 132 17 110VME040 420,00

B

A

Butterfly Valve, Manualq Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Temperature range: -30 to 130 °C q Seal material: FPMq Cycles to first maintenance: 3,000q Swivel valve plateq Nearly free clearance in open position q Valve position clearly indicated by T-handleq Unlike ball valves, this valve can be employed in HV, but not at overpressure

C

A

B

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 KF 80 60 123 110VSM016 130,00

25 KF 64 50 114 110VSM025 135,00

40 KF 80 50 123 110VSM040 150,00

50 KF 90 60 140 110VSM050 245,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

16 KF 80 60 123 120VSM016 215,00

25 KF 64 50 114 120VSM025 220,00

40 KF 80 50 123 120VSM040 240,00

50 KF 90 60 140 120VSM050 330,00

Valves

Catalog 2010 309

In-line Valves


Butterfly Valve, Manual, ISO-F

3-way Butterfly Valve, Manual

q Pressure range: 1 x 10-8 mbar to 1 bar q Short design; a cost-effective alternative to an HV gate valve q Temperature range: -30 to 130 °C q Seal material: FPMq Comes with set of M8 x 75 screwsq Cycles to first maintenance: 3,000q Swivel valve plateq Nearly free clearance in open position

q HV 3/3-way butterfly valve q Pressure range: 1 x 10-8 mbar to 1 barq Temperature range: -30 to 130 °C q Seal material: FPMq Cycles to first maintenance: 3,000q Swivel valve plateq Nearly free clearance in open position

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 ISO-F 145 30 190 510VSM063 280,00

Flange Size [DN]

A [mm]

B [mm]

Connection: Center

Connection: Left

Connection: Right

Item No. Price €

40 KF 65 148 40 KF 16 KF 16 KF 120VSD040-16-16 360,00

40 KF 65 148 40 KF 25 KF 25 KF 120VSD040-25-25 380,00

40 KF 65 148 40 KF 40 KF 40 KF 120VSD040-40-40 400,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Item No. Price €

63 ISO-F 145 30 190 520VSM063 340,00

Aluminum

Stainless Steel

Stainless Steel

Two butterfly valves with a central outlet serve as „vacuum manifolds.“ The lateral ports come in various flange sizes. The two indepen-dent valves enable 4 switch states, corresponding to „T“ and „L“ ball valve versions. Semi-open positions are also possible. In contrast to a ball valve, this valve can be used in HV environments, but not at overpressure.

B

A

A

C

B

Valves

310 Catalog 2010

In-line Valves


In-line Valve from SMC, Pneumatic

q Temperature range: 5 to 60 °C q Pressure range: 1 x 10-8 mbar to 1 bar (abs.) q Bellows-sealed (Spring Bellow 316L; particle-free)q Valve plate seal: FPM (fluororubber)q Leakage rate: 1.3 x 10-9 mbar l/s (without permeation)q Cycles to first maintenance: 2,000,000q Cleaned and packaged suitable for cleanroom useq Pneumatics: Normally closedq Visible position indicator, equipped for position sender (see SMC accessories)q Options: Other seal materials, high-temperature version for up to 150 °C, double-action pneumatics q Data sheet: See www.trinos.com

In-line valves from SMC are not available in aluminum, nor in sizes DN 16, DN 100 or DN 160, nor with CF flanges.

Stainless Steel

B

A

Flange Size [DN]

A [mm]

B [mm]

Conduct. [l/s]

Weight [kg]

Operating Time [s]


Item No. Price €

25 KF 100 79 14 0,66 <120 M5 120V-XYA-25A-M9 430,00

40 KF 130 106 45 1,42 <500 R1/8“ 120V-XYA-40A-M9 620,00

50 KF 178 119 80 2,40 <650 R1/8“ 120V-XYA-50A-M9 760,00

63 ISO-K 209 149 100 4,3 <850 R1/8“ 320V-XYA-63DA-M9 1100,00

80 ISO-K 268 178 117 7,7 <1050 R1/8“ 320V-XYA-80DA-M9 1500,00

In-line Valve, Type 1, Pneumaticq Bellows-sealed valve with pneumatic drive q Pressure range: 1 x 10-8 mbar to 3 barq Seal material: FPM (fluororubber) q Pneumatics: Normally closed, 4 to 8 bar compressed air, M8 connection q Cycles to first maintenance: 1,000,000q Suitable control valve: V-SS-16-25-24DC or ~-230VAC; see pneumatic accessoriesq Optional: Position sender, control valve

Aluminum

Stainless Steel

A

CB

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Conductance [l/s]

Item No. Price €

16 KF 70 117 17 5 110VDP016-1 280,00

25 KF 80 145 23 13 110VDP025-1 370,00

40 KF 110 160 30 40 110VDP040-1 480,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Conductance [l/s]

Item No. Price €

16 KF 80 152 17 5 120VDP016-1 430,00

25 KF 100 153 23 13 120VDP025-1 570,00

Valves

Catalog 2010 311

Venting Valves


Venting Valve, Manual

Venting Valve from SMC, Solenoid

q Manually operated screw cap for venting with ambient air q Pressure range: 1 x 10-8 mbar to 3 barq Temperature range: -30 to 130 °C q Valve seal: FPM (fluororubber)q Recommended accessory: 122ZRR016 Reducer Centering Ring, 10/16 KF

q High vacuum tube valve with Swagelok® compression fittings or VCR® sealing technology q Pressure range: 1 x 10-8 mbar to 10 bar (abs.)q Leakage rate, internal: 1.3 x 10-8 mbar l/s (without permeation) q Leakage rate, external: 1.3 x 10-10 mbar l/s (VCR); 1.3 x 10-9 mbar l/s (Swagelok)q Seal materials: FPM (fluororubber), PE, PFAq Temperature range: 5 to 40 °C q Cleaned and packaged suitable for cleanroom use q Normally closed; opens with solenoid (DC)q Electrical connection: DIN connector with screw terminals („D“ in item no.) or grommet = connecting cable: 280 mm („G“ in item no.)q Options: 6V, 12V, 24V, 48V voltages, overvoltage protection, LED, spacer for attachment to base plateq Data sheet: See www.trinos.com

Brass, Nickel-plated

Stainless Steel

Stainless Steel

A

BA

B

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 KF 40 30 140VBE010 60,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 KF 40 30 120VBE010 85,00

Flange Size [DN]

A [mm]

B [mm]

Opening Ø [mm]

Max. Pressure [bar]

Voltage Connection Item No. Price €

Swagelok 1/4“ 41 64 2 8 24V DC DIN-Stecker 900V-XSA1-12S-5D 250,00

Swagelok 1/4“ 41 64 2 8 24V DC DIN-Stecker* 900V-XSA1-12S-5DZ 260,00

Swagelok 1/4“ 41 64 2 8 24V DC 280 mm Kabel 900V-XSA1-12S-5G 240,00

Swagelok 1/4“ 41 64 2 8 12V DC 280 mm Kabel 900V-XSA1-12S-6G 220,00

Swagelok 1/4“ 41 75,5 3 10 24V DC 280 mm Kabel 900V-XSA2-22S-5G 240,00

VCR 1/4“ male 57 75,5 4,5 3 24V DC DIN-Stecker* 900V-XSA2-32V-5DS 270,00

Swagelok 1/4“ 46,5 82 4,5 8 24V DC DIN-Stecker 900V-XSA3-32S-5D 270,00

VCR 1/2“ male 66 82 6 3 24V DC DIN-Stecker 900V-XSA3-43V-5D 270,00

* = DIN-plug incl. overvoltage protection

We recommend the following adapters as accessories for direct connection to a vacuum flange:

For the Swagelok version: q 1/4“ half nipple (e.g. 120FRA016-6-23), or q 1/4“ Swagelok adapter (e.g. 120ASW016-0250) + 1/4“ tubing

For the VCR version:q VCR adapter, female, to KF (e.g. 120AVF016-0250) or to CF (e.g. 420AVF016-0250)

Valves

312 Catalog 2010

Venting Valves


Smooth-Vent Venting Valve from SMC, Pneumatic

q Connectors: Swagelok® tube union or VCR® sealing system q For use e.g. as chamber venting valve, installed on gas lineq Pressure range: 1 x 10-8 mbar to 2 bar (abs.) q Leakage rate: 5 x 10-8 mbar l/s (without permeation)q Seal: FPM (fluororubber)q Temperature range: 5 to 40 °Cq Cleaned and packaged suitable for cleanroom use q Pneumatics: Normally closedq Primary valve opening: 3 mm diameter/4.6 mm² effective, Smooth-Vent opening: Adjustable, 0.2 - 4.6 mm² effective q Data sheet: See www.trinos.com

Smooth-Vent valves consist of two pneumatic valves in a single component: A bellows-sealed primary valve with maximum opening and a diaphragm valve with adjustable conductance for smooth venting. The adjustment knob has a calibrated scale. This valve system prevents both strong gas shocks when venting and turbulence that can stir up particulate matter. Due to its small size, the two M5 compressed air inlets are positioned close together and there are no integral control valves.

A

B

We recommend the following adapters as accessories for direct connection to a vacuum flange:

For the Swagelok version: q 1/4“ half nipple (e.g. 120FRA016-6-23), or q 1/4“ Swagelok adapter (e.g. 120ASW016-0250) + 1/4“ tubing

For the VCR version:q VCR adapter, female, to KF (e.g. 120AVF016-0250) or to CF (e.g. 420AVF016-0250)

Flange Size [DN]

A [mm]

B [mm]


Swagelok 1/4“ 52 91,5 M5 900V-XVD2-02S 990,00

VCR 1/4“ male 52 91,5 M5 900V-XVD2-02V 900,00

Stainless Steel

Valves

Catalog 2010 313

Overpressure Valves


Pressure Relief Valve

Burst Disk

q To relieve overpressure q KF on both sidesq Switching pressure approximately 200 mbar for DN 40, 400 mbar for DN 16q Maximum opening approximately 55 mm² for DN 40, 10 mm² for DN 16q Leakage rate: <1 x 10-7 mbar l/s at 1 bar differential pressureq Pressure range: 1 x 10-6 mbar to 1.6 bar (abs.) q Temperature range: 5 to 60 °C q Valve seal: FPM (fluororubber)q Not suitable for safety-relevant applications

q UHV overpressure protection q Leakage rate: <1 x 10-10 mbar l/sq Bakeable to 400 °Cq Stainless steel, no moving partsq Unit must be replaced after burstingq The burst pressure of 420VBS016-0_5 bar is lower than 0.5 bar, the lowest value at which a vessel can be considered a pressure vessel. Bakeable to 280 °C; leakage rate: <10-8 mbar x l/s

A pretensioned spring can be used to vary the switching pressure by approximately +/- 100 mbar. The switching time can vary by more than +/- 50 mbar and has hysteresis. An exhaust hose can be attached to the KF connection at the outlet side.

Flange Size [DN]

A [mm]

Item No. Price €

16 KF 25 120VUS016 130,00

40 KF 35 120VUS040 165,00

Stainless Steel

Stainless SteelFlange Size

[DN]A

[mm]B

[mm]Min. Burst Pressure

[bar (overpressure)]Max. Burst Pressure

[bar (overpressure)]Item No. Price €

16 CF 92 90 0,4 0,5 420VBS016-0_5bar 1030,00

16 CF 50,8 58,67 0,6 0,8 420VBS016-0_8bar 770,00

16 CF 48 45 0 1,7 420VBS016-1_7bar 340,00

A

B

A

Valves

314 Catalog 2010

Gate Valves


UHV Gate Valve, Manual

UHV Gate Valve, Pneumatic

q UHV gate valve, manual; up to DN 50: with handwheel; DN 63 and larger: with crank q Pressure range: 1 x 10-10 mbar to 1 bar (abs.); differential opening pressure: 25 mbarq Temperature range: Up to 150 °C q Cycles to first maintenance: 100,000 up to DN 40; 50,000 up to DN 200 q Mechanical elements and valve bodies metallically sealed q Valve plate seal: FPM (fluororubber)q Data sheet: See www.trinos.com

q UHV gate valve, pneumatic q Pressure range: 1 x 10-10 mbar to 1 bar (abs.); differential opening pressure: 25 mbarq Temperature range: Up to 150 °C q Cycles to first maintenance: Up to DN 40: 100,000; up to DN 200: 50,000 q Mechanical elements and valve bodies metallically sealed q Valve plate seal: FPM (fluororubber)q Pneumatics: 5 to 8 bar. Options: Control valve, position senderq Data sheet: See www.trinos.com

The ISO-F and CF gate valves in this economically priced series are equipped with blind bore holes. Please ensure the screws are the right length before beginning installation.

The ISO-F and CF gate valves in this economically priced series are equipped with blind bore holes. Please ensure the screws are the right length before beginning installation.

Stainless Steel

Stainless Steel

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Weight [kg]

Conduct. [l/s]

Item No. Price €

40 KF 37,5 56 230 1,3 130 120VSU040 985,00

50 KF 50 59 295 2 260 120VSU050 995,00

63 ISO-F 63 63 434 5 550 520VSU063 1595,00

100 ISO-F 100 63 523 11 1900 520VSU100 1995,00

160 ISO-F 152 73 637 14 6000 520VSU160 2595,00

200 ISO-F 200 73 717 20 12000 520VSU200 3495,00

40 CF 37,5 45,5 230 1,3 130 420VSU040 995,00

63 CF 63,5 69 434 5 550 420VSU063 1690,00

100 CF 100 73 488 11 1700 420VSU100 2190,00

160 CF 152 78 652 14 6000 420VSU160 2990,00

200 CF 200 90,4 732 20 12000 420VSU200 4080,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Weight [kg]

Conduct. [l/s]

Item No. Price €

40 KF 37,5 55 254 1,3 130 120VSU040-P 1135,00

50 KF 50 59 321 2 260 120VSU050-P 1145,00

63 ISO-F 63 63 469 5 550 520VSU063-P 1795,00

100 ISO-F 100 63 523 11 1900 520VSU100-P 2095,00

160 ISO-F 152 73 637 14 6000 520VSU160-P 2795,00

200 ISO-F 200 73 717 20 12000 520VSU200-P 3695,00

40 CF 37,5 50,4 254 1,3 130 420VSU040-P 1090,00

63 CF 63,5 69 469 5 550 420VSU063-P 1895,00

100 CF 100 73 523 11 1700 420VSU100-P 2990,00

160 CF 152 78 637 14 6000 420VSU160-P 3552,00

200 CF 200 90,4 717 20 12000 420VSU200-P 3990,00

A

C

B

A

C

B

Valves

Catalog 2010 315

Gate Valves


HV Gate Valve from VAT®, Aluminum

q Pressure ranges: 16-50 ISO-KF: 10-7 mbar to 1 bar; 63-200 ISO-F: 10-7 mbar to 1.6 bar; 250-320 ISO-F: 10-7 mbar to 1.2 bar q Differential opening pressure: < 30 mbar q Leakage rate: 10-9 mbar l/sq Temperature range: 100 °C for valve body, 80 °C for manual/pneumatic systemq Cycles to first maintenance: Up to DN 40: 50,000; DN 63 to 100: 200,000; DN 160 to 320: 100,000 q Seals: Valve plate, head and thrust rod: FPM (fluororubber) q Without position sender, without control valveq Options: Position sender, control valve, additional KF ports (e.g. for bypass)

These aluminum gate valves from VAT® are an economically priced alternative to stainless steel gate valves for high vacuum up to 10-7 mbar. The manual operating system uses a knee lever up to DN 50, and a push rod for DN 63 and larger.

Aluminum, Manual

Aluminum, Pneumatic

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Closing Time [s]

Conduct. [l/s]

Item No. Price €

16 KF 15 40 100 - 10 110VSC016 648,00

25 KF 24 50 139 - 34 110VSC025 715,00

40 KF 39 51 208 - 140 110VSC040 796,00

50 KF 49 55 240 - 260 110VSC050 800,00

63 ISO-F 65 60 396 - 550 510VSC063 1275,00

100 ISO-F 100 60 413 - 2000 510VSC100 1657,00

160 ISO-F 150 70 547 - 6000 510VSC160 2133,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Closing Time [s]

Conduct. [l/s]

Item No. Price €

16 KF 15 40 105 0,8 10 110VSC016-P 823,00

25 KF 24 50 136 1,1 34 110VSC025-P 877,00

40 KF 39 51 196 1,2 140 110VSC040-P 999,00

50 KF 49 55 220 1,3 260 110VSC050-P 1053,00

63 ISO-F 65 60 341,5 1,5 550 510VSC063-P 1350,00

100 ISO-F 100 60 425 2 2000 510VSC100-P 1560,00

160 ISO-F 152 70 660 2 6000 510VSC160-P 2190,00

200 ISO-F 200 80 688 3 12000 510VSC200-P 3510,00

250 ISO-F 261 100 843 5 22000 510VSC250-P 4368,00

320 ISO-F 318 120 1029 7 33000 510VSC320-P 8937,00

A

C

B

A

C

B

Valves

316 Catalog 2010

Gate Valves


UHV Gate Valve from VAT®, Stainless Steel

q Pressure ranges: 16-50 CF: 10-10 mbar to 2 bar; 63-200 CF: 10-10 mbar to 1.6 bar; 250 CF: 10-10 mbar to 1.2 bar q Differential opening pressure: < 30 mbar q Leakage rate: Internal: <10-9 mbar l/s; external: < 5 x 10-10 mbar l/sq Bakeout rate: Up to 50°/hq Temperature range: Open: 250 °C; closed: 200 °C; pneumatics: 200 °C q Cycles to first maintenance: 50,000 q Seals: Valve plate: FPM; head: Metallic; drive: Bellows-sealed q Without position sender, without control valveq Options: Position sender, control valve, additional KF ports (e.g. for bypass)

These stainless steel gate valves from VAT® for UHV up to 10-10 mbar are metallically sealed and bakeable in the valve head. Only the valve plate is FPM-sealed. The manual drive is handwheel actuated up to DN 50, and crank actuated in DN 63 and larger.

Stainless Steel, Manual

Stainless Steel, Pneumatic

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Closing Time [s]

Conduct. [l/s]

Item No. Price €

40 CF 40 35 198 - 220 420VSC040 1728,00

63 CF 70 70 465 - 600 420VSC063 2862,00

100 CF 100 70 462 - 1700 420VSC100 3618,00

160 CF 150 70 552 - 6000 420VSC160 4060,00

200 CF 200 80 660 - 12000 420VSC200 6588,00

250 CF 254 100 841 - 26000 420VSC250 10476,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Closing Time [s]

Conduct. [l/s]

Item No. Price €

40 CF 40 35 198 0,7 220 420VSC040-P 2038,00

40 CF 40 35 198 0,7 220 420VSC040-P-L 2214,00

40 CF 40 35 198 0,7 220 420VSC040-P-L-S 2295,00

63 CF 70 70 346 1 600 420VSC063-P 2750,00

100 CF 100 70 418 1,2 1700 420VSC100-P 3070,00

160 CF 150 70 523 1,5 6000 420VSC160-P 4995,00

200 CF 200 80 630 2 12000 420VSC200-P 6628,00

250 CF 254 100 800 4 26000 420VSC250-P 10476,00

C

AB

A

C

B

Valves

Catalog 2010 317

Gate Valves


Rectangular Gate Valve from SMC, Pneumatic

q Especially low particulate emissions q L-motion q Cycles to first maintenance: 2,000,000 up to DN 40; 50,000 up to DN 200q Endlock: Valve engages at stop, even in the event of pneumatic outageq Wiper on lifting cylinder protects drive from wafer fragments q Pressure range: 1 x 10-6 mbar to 1 bar (abs.) in both directions q Leakage rate: Better than 6 x 10-8 mbar l/s in both directionsq Differential opening pressure: 40 mbarq Temperature range: 5 to 150 °C at gate; 60 °C at actuator q Seal: FPM (fluororubber)q Options: Kalrez® seal; other cassette dimensions; position sender; wide rectangular gate valves (> 800 mm) with multiple drives upon requestq Data sheet: See www.trinos.com

These pneumatically operated rectangular gate valves are especially suitable for wafer transfer. Their design makes them insensitive to wear, as the gate is first lifted before being pressed against the sealing surface. This technique is also termed „L-motion.“ The drives are available in a variety of cassette dimensions.

AluminumA

[mm]B

[mm]C


50 336 60 900V-XGT312-503366-1-C 9995,00

46 236 50 900V-XGT222-46236-1-C 6940,00

32 222 50 900V-XGT222-32222-1-C 6430,00

B

A

C

Valves

318 Catalog 2010

Ball Valves


Ball Valve, Manual

q Ball valve with completely free clearance q Pressure range: 10-5 mbar to 2.5 bar (abs.)q Temperature range: -20 to 80 °C media temperatureq Teflon seal materialq Leakage rate: <1 x 10-6 mbar l/sq Cycles to first maintenance: 20,000

A

B

Ball valves are very rugged and can be used both in medium vacuum environments and at overpressures of up to several tens of bars. The limiting factor is usually small-flange outlet connections, as the industry standard restricts their use to overpressures of 1.5 bar and less. In this valve, a metal ball with a through hole rotates 90° in a Teflon seat to open the full cross-sectional clearance.

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 KF 85 10 140VKZ010 70,00

16 KF 90 15 140VKZ016 70,00

25 KF 110 24 140VKZ025 85,00

40 KF 135 40 140VKZ040 125,00

50 KF 155 50 140VKZ050 160,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

10 KF 100 12 120VKZ010 75,00

16 KF 110 15 120VKZ016 80,00

25 KF 130 24 120VKZ025 110,00

40 KF 160 38 120VKZ040 165,00

50 KF 185 50 120VKZ050 225,00

63 ISO-K - 65 320VKZ063 840,00

Brass

Stainless Steel

Valves

Catalog 2010 319

Ball Valves


Ball Valve, 3-way, Manual

q Ball valve with 3 ports q T or L type ballq Temperature range: -20 to 80 °C media temperatureq Teflon seal materialq Pressure range: 10-5 mbar to 2.5 bar (abs.)q Leakage rate: <1 x 10-6 mbar l/sq Cycles to first maintenance: 20,000

A

A

B

Ball valves are very rugged and, depending on their size, can be used both in medium vacuum envi-ronments and at overpressures of up to several tens of bars. The limiting factor is usually small-flange outlet connections, as the industry standard restricts their use to overpressures of 1.5 bar and less. In this valve, a metal ball with a T or L-shaped through hole rotates in a Teflon seat. Which outlets can be connected depends on the type of ball in the valve. The lever has stops every 90°. The ball can be rotated through 360° and can easily be set to any of the four positions using the lever. The holes are not free of overlap; adjacent ports are bypassed briefly while switching the ball position.

Brass

Stainless Steel

Flange Size [DN]

A [mm]

B [mm]

Ball Type (Hole) Item No. Price €

10 KF 55,5 10 L 140VKD010-L 155,00

10 KF 55,5 10 T 140VKD010-T 155,00

16 KF 60 15 L 140VKD016-L 155,00

16 KF 60 15 T 140VKD016-T 155,00

25 KF 72,5 24 L 140VKD025-L 215,00

25 KF 72,5 24 T 140VKD025-T 215,00

40 KF 89 40 L 140VKD040-L 380,00

40 KF 89 40 T 140VKD040-T 380,00

50 KF 100,5 50 L 140VKD050-L 550,00

50 KF 100,5 50 T 140VKD050-T 550,00

Flange Size [DN]

A [mm]

B [mm]

Ball Type (Hole) Item No. Price €

16 KF 60 11 L 120VKD016-L 195,00

16 KF 60 11 T 120VKD016-T 195,00

25 KF 75 20 L 120VKD025-L 265,00

25 KF 75 20 T 120VKD025-T 265,00

40 KF 87,5 32 L 120VKD040-L 385,00

40 KF 87,5 32 T 120VKD040-T 385,00

50 KF 100 40 L 120VKD050-L 560,00

50 KF 100 40 T 120VKD050-T 560,00

Valves

320 Catalog 2010

Ball Valves


Ball Valve, Pneumatic

q Ball valve with completely free clearance q Pressure range: 10-5 mbar to 2.5 bar (abs.)q Temperature range: -20 to 80 °C media temperatureq Teflon seal materialq Leakage rate: <1 x 10-6 mbar l/sq Cycles to first maintenance: 20,000q Pneumatics: 6 to 8 bar, double actionq Optional: 5/2-way gate valve for double-action pneumatics; single-action pneumatics with 3/2-way valve; position sender

A

B

Ball valves are very rugged and can be used both in medium vacuum environments and at overpressures of up to several tens of bars. The limiting factor is usually small-flange outlet connections, as the industry standard restricts their use to overpressures of 1.5 bar and less. In this valve, a metal ball with a through hole rotates 90° in a Teflon seat to open the full cross-sectional clearance.

Flange Size [DN]

A [mm]

B [mm]

Article No. Price €

16 KF 90 15 140VKZ016-p 210,00

25 KF 130 24 140VKZ025-p 245,00

40 KF 135 38 140VKZ040-p 300,00

50 KF 159 47 140VKZ050-p 330,00

Flange Size [DN]

A [mm]

B [mm]

Article No. Price €

16 KF 113 15 120VKZ016-p 270,00

25 KF 130 24 120VKZ025-p 300,00

40 KF 156 40 120VKZ040-p 430,00

50 KF 185 50 120VKZ050-p 445,00

63 ISO-K - 70 320VKZ063-p 700,00

Brass

Stainless Steel

Valves

Catalog 2010 321

Ball Valves


Ball Valve, 3-way, Pneumatic

q Ball valve with 3 ports, pneumatic q T or L type ball q Temperature range: -20 to 80 °C media temperatureq Teflon seal materialq Pressure range: 10-5 mbar to 2.5 bar (abs.)q Leakage rate: <1 x 10-6 mbar l/sq Cycles to first maintenance: 20,000q Pneumatics: 6 to 8 bar, double actionq Optional: 5/2-way control valve for double-action pneumatics; single-action pneumatics with 3/2-way valve; position sender

Ball valves are very rugged and, depending on their size, can be used both in medium vacuum envi-ronments and at overpressures of up to several tens of bars. The limiting factor is usually small-flange outlet connections, as the industry standard restricts their use to overpressures of 1.5 bar and less. In this valve, a metal ball with a T or L-shaped through hole rotates in a Teflon seat. Which outlets can be connected depends on the type of ball in the valve. The pneumatic positioner has stops every 90°. The ball can be rotated through 360° and can easily be set to any of the four positions using the pneumatics. The holes are not free of overlap; adjacent ports are bypassed briefly while switching the ball position.

Brass

Stainless Steel

Flange Size [DN]

A [mm]

B [mm]

Ball Type (Hole) Article No. Price €

10 KF 60 10 L 140VKD010-L-p 320,00

10 KF 60 10 T 140VKD010-T-p 320,00

16 KF 60 15 L 140VKD016-L-p 320,00

25 KF 75 24 L 140VKD025-L-p 460,00

25 KF 75 24 T 140VKD025-T-p 460,00

40 KF 87,5 40 L 140VKD040-L-p 640,00

40 KF 87,5 40 T 140VKD040-T-p 640,00

50 KF - 50 L 140VKD050-L-p 1000,00

50 KF - 50 T 140VKD050-T-p 1000,00

Flange Size [DN]

A [mm]

B [mm]

Ball Type (Hole) Article No. Price €

16 KF 60 11 L 120VKD016-L-p 380,00

16 KF 60 11 T 120VKD016-T-p 380,00

25 KF 75 20 L 120VKD025-L-p 510,00

25 KF 75 20 T 120VKD025-T-p 510,00

40 KF 88 32 L 120VKD040-L-p 760,00

40 KF 88 32 T 120VKD040-T-p 760,00

50 KF - 40 L 120VKD050-L-p 1120,00

50 KF - 40 T 120VKD050-T-p 1120,00

A

A

B

Valves

322 Catalog 2010

Ball Valves


Ball Valve, High Vacuum

q Heavy duty ball valve for high vacuum q Especially resistant to particulate matterq High quality 316L/1.4404 stainless steelq Temperature: Bakeable to 140 °C, pneumatics to 80 °Cq Seal materials: Shaft seal: FPM; ball seat: Teflonq Pressure range: 10-6 mbar to 3 bar (abs.)q Permissible differential pressure: 3 barq Leakage rate: <1 x 10-8 mbar l/sq Manual or pneumatic q Pneumatics: 4.5 to 7 bar, double actionq Optional: Single-action pneumatics (normally closed or open); control valve; position sender; pneumatics to 140 °C

These ball valves are distinguished by particularly rugged materials and design. They can be disassembled for maintenance, making them especially suitable for challenging industrial applications. Furthermore, they can easily be adapted to customer-specific requirements. In contrast to gate valves, these ball valves can overcome high differential pressures.

Stainless SteelFlange Size

[DN]A

[mm]B

[mm]Drive Item No. Price €

63 ISO-K 172 65 manuell 320VKH063 2030,00

63 ISO-K 172 65 pneumatisch 320VKH063-p 2500,00

100 ISO-K 196 83 manuell 320VKH100 3700,00

100 ISO-K 196 83 pneumatisch 320VKH100-p 4050,00

A

B

Valves

Catalog 2010 323



2(A)

(R) (P)3 1

Control Valve from SMC

q 3/2-way solenoid valve from SMC q Operating temperature: 0 to +50°C q IP65 with DIN connectorq 0 to 9 bar compressed air q 3 x G1/8 connections, including adapters for pneumatic valves from SMC and Type 2 pneumatic valvesq Compressed air inlet: Threaded union for 6 mm hose q Compressed air outlet to valve for sizes DN 16 to 25: M5 q Compressed air outlet to valve for sizes DN 40 to 100: R1/8 q Electrical connection: 3-pin DIN connection with screw terminalsq Control voltage: 24V DC or 230V ACq Data sheet: See www.trinos.com

These control valves can be screwed onto the pneumatic connection on vacuum valves to switch the supply of compressed air. The control valve handles the logic function: It is electrically switched and releases the compressed air. The compressed air generates the high force in the pneumatic piston that is needed to open the vacuum valve. They fit SMC vacuum valves as well as Type 2 valves with single-action pneumatic cylinders. With the latter valves, the vacuum valve is opened by compressed air and automatically closed by means of spring action (normally closed). The control valve has 3 compressed air connections and 2 switched states. All compressed air connections have the same G1/8 connection thread. You can change the switching function from the standard ‚normally closed‘ to ‚normally open‘ by replacing the adapter (included in delivery). These control valves are not suitable for double-action pneumatic cyclinders. Due to their dimensions, they cannot be attached directly to SMC Softpump valves.

For SMC Valve Size Control Voltage Item No. Price €

DN16...25 230V AC 900P-V-SS-16-25-230VAC 60,00

DN16...25 24V DC 900P-V-SS-16-25-24VDC 60,00

DN40...100 230V AC 900P-V-SS-40-100-230VAC 60,00

DN40...100 24V DC 900P-V-SS-40-100-24VDC 60,00

33

56,5

30

Valves

324 Catalog 2010



Position Sender from SMC

q For pneumatic rectangular and in-line valves from SMC q For valve monitoring in system control systemsq Other designations: Signal sender, position indicator, end switch, auto switch, reed switch, solid state switchq LED operating status indicatorq Operating temperature: -10 to 60°Cq Response time: Approximately 1 ms q 3 m open-ended connecting cable q Due to their small size, only the open state can be detected for valves with diameters of DN 16q Optionally available upon request: Angled construction; other cable lengths; connectorsq Data sheet: See www.trinos.com

Magnetic sensor for use with pneumatic SMC valves with integral position sender magnet.

Working principle: A magnet is built into the valve spool. One or two magnetic field sensors can be mounted in such a manner that a control system can retrieve data indicating the position(s), open and/or shut. On SMC valves, the position sender can be mounted directly in the grooves provided. Retrieval of the switching position is dependent on the position at which sensor is plugged into the groove.

There are two ways to implement a magnet sensor for SMC valves: 1) Reed switch: Two magnetically soft pads are magnetized and attract each other. This closes an electrical contact. A 2-channel connection is generally employed with this method. 2) Solid-state switch: The sensor is a semi-conductor unit that typically emits a logical PNP or NPN signal (high-side/low-side switch). This method usually uses a 3-channel connection (supply voltage, ground, signal). Both versions come with an LED that shows the current status at the sensor head. Position indicators require a 24V supply voltage. Additional information can be found on the data sheet.

PlasticTechnique Type Elec. Connection Item No. Price €

Reed-Switch 2-wire 24VDC/5...40mA 900P-D-A93L 20,00

electronic 2-wire 10...28VDC/40mA 900P-D-M9BL 43,00

electronic NPN 3-wire 4.5...28VDC/40mA 900P-D-M9NL 43,00

electronic PNP 3-wire 4.5...28VDC/40mA 900P-D-M9PL 43,00

Valves

Catalog 2010 325



Position Sender from SMC, High Temperature

q Position sender for up to 150 °C with separate signal amplifier q For pneumatic high-temperature valves from SMC (Series xxxH0-F7)q Sensor + 3 m cable + amplifier + 3 m cableq Rail-mounted sensorq Operating temperature: 0 to +150 °C for sensor, 0 to +60 °C for amplifier q Response time: Approximately 1.2 ms q 3 m open-ended connecting cable q Due to their small size, only the open state can be detected for valves with diameters of DN 16q 2-color LED operating status indicatorq Optionally available upon request: Angled construction; different cable lengths; connectors q Data sheet: See www.trinos.com

Magnetic sensor for use with SMC valves that have a built-in high-temperature magnet. The high temperature series from SMC (Valve: xxH0-F7) has an additional rail for mounting two high-temperature sensors. The universal installation adapter contains a screw and a spacer for adapting the sensor height. The sensor has a permanent cable connection to the amplifier, which in turn is designed for 35 mm top-hat rail installation.

Plastic, 150 °CTechnique Type Elec. Connection Item No. Price €

Adapter Railmounting for D-F7NJ - 900P-BQ-2 0,80

electronic+amplifier 3-wire 20...26VDC/40mA 900P-D-F7NJL 105,00

NOTES

Feedthroughs

Feedthroughs


Electrical Feedthrougs

Electrical Feedthrough, Weld Adapter ........................331

Electrical Feedthrough, Flanged, 1 kV, 20 A ....................................................332

Electrical Feedthrough, Flanged, 5 kV, 15 A ....................................................333

Electrical Feedthrough, Flanged, 5 KV, 30 A ....................................................334

Electrical Feedthrough, Flanged, 10 kV, 30 A ..................................................335



Electrical Feedthrough, Flanged, 12 kV, 150 A ................................................338


Electrical Feedthrough, Flanged, with Silicone Plug .........................................340

Plug-on Connector ....................................................341

Contact Clamp ...........................................................341

Multi-pin

D-Sub Socket, Flanged ..............................................342

Multi-pin Weld Adapter, 700V DC, 10 A ....................343

Multi-pin, Flanged, 700V DC, 10 A .............................344

Thermocouple

Thermocouple Feedthrough, Weld Adapter ...............345

Thermocouple Feedthrough, Flanged, Type K ............346

Thermocouple Feedthrough, Type K, Weld Adapter, with MS Plug ......................................347

Thermocouple Feedthrough, Type K, Flanged, with MS Plug ...............................................347

Combi-Feedthroughs

Combi-Feedthrough Weld Adapter, Electrical and Thermocouple, Type K .........................................348

Combi-Feedthrough, Flanged, Electrical and Thermocouple, Type K .........................................348

Coaxial Feedthroughs

Coaxial Feedthrough, Weld Adapter ...........................349

Coaxial Feedthrough, Flanged, BNC ...........................351

Coaxial Feedthrough, Flanged, MHV ..........................353

Coaxial Feedthrough, Flanged, SHV ...........................355

Fluid Feedthroughs

Fluid Feedthrough ......................................................357

Liquid Nitrogen Feedthrough .....................................359

Special Feedthroughs

Feedthrough for Wires ...............................................361

Isolator .......................................................................362

Contents

Feedthroughs


Feedthroughs

This chapter contains a selection of standard feedthroughs for in-troducing

q Electric powerq Electrical signalsq Thermal voltagesq Liquids or gasesq Insulatorsq Wires, e.g. sheathed thermocouples

into your system in a vacuum-tight manner, as well as for use as either individual or multiple feedthroughs. In addition to the standard versions, we can also offer you custom solutions upon request. We can combine standard feedthroughs on one and the same flange or weld further popular feedthroughs in accordance with your wishes. Moreover, we also offer connectors for air- and vacuum-side connection.

Please observe the following information relating to the feed-throughs:

Electrical feedthroughs:

q Voltage: DC

q Environment: Exterior dry air, interior pressure <10-4 mbar

q The indicated temperature range applies to the vacuum side Avoid condensation of water vapor at low temperatures and oxidation of the copper conductors at high temperatures (e.g. copper conductor: Tmax = 200°C)

q Amperage/voltage data are valid for 20°C. Maximum voltages and amperages will be lower at higher temperatures.

Thermocouple feedthroughs:

They are designed for transferring thermal voltages – but not for electric power.

In addition to the indicated Type K and Type S feedthroughs, we can also offer you feedthroughs for further thermocouple models upon request. The table below indicates the maximum measure-ment ranges for various thermocouples.

Type Material Polarity Temperature Range

K ChromelAlumel +/- -200 to 1250°C

CTungsten/5% Rhenium-Tungsten/

26% Rhenium+/- 0 to 2320°C

E Chromel-Constantan +/- -200 to 900°C

J Iron-Constantan +/- 0 to 750°C

T Copper-Constantan +/- -200 to 350°C

N Ni-Cr-SiNi-Si-Mg +/- -270 to 1300°C

R Platinum/13 % Rhodium-Platinum +/- 0 to 1450°C

S Platinum/10% Rhodium-Platinum +/- 0 to 1450°C

Liquid feedthroughs:

We can offer you liquid feedthroughs with simple pipe ends, Swagelok or VCR compression couplings. We can additionally offer the tube feedthrough in the flange in thermally insulated design.

Feedthroughs


Installation

Mounting of the feedthroughs in the flange is described in the cor-responding flange chapters. When welding adapters to a flange, UHV-tight welds must be assured (no inclusions in the weld, weld on vacuum side or full-penetration weld). Assure careful storage if feedthroughs have to be stored. Especially in the case of electrical feedthroughs of all types, incorrect storage can lead to breakage or irreversible conductor bending, making the feedthrough unservice-able.

The feedthroughs are not designed to assume mechanical loads. In ceramically insulated feedthroughs, in particular, breakage of the ceramic can lead to leakage.

The indicated pressures are absolute pressures and are valid at an ambient pressure of 1000 mbar.

Feedthroughs

Catalog 2010 331

Electrical Feedthroughs


Electrical Feedthrough, Weld Adapter

Copper FeedthroughsU

[kV]I

[A]Pins A

[mm]B

[mm]C

[mm]D

[mm]E


1 20 1 25 57 1,3 6,3 0,4 XST-1-20-1 42,00

1 20 2 54 48 1,3 19,0 0,8 XST-1-20-2 69,00

1 20 4 54 48 1,3 19,0 0,8 XST-1-20-4 143,00

1 20 8 31 100 1,3 19,0 0,8 XST-1-20-8 173,00

3 250 1 80 104 9,7 19,0 0,8 XST-3-250-1 85,00

3 600 1 97 86 19 28,5 0,8 XST-3-600-1 205,00

5 20 1 47 55 1,3 6,3 0,4 XST-5-15-1 42,00

5 20 2 48 54 1,3 19,0 0,8 XST-5-15-2 96,00

5 20 4 48 54 1,3 19,0 0,8 XST-5-15-4 110,00

5 150 1 80 105 6,4 15,8 0,8 XST-5-150-1 65,00

5 30 1 57 127 2,4 11,1 0,8 XST-5-30-1 42,00

10 30 1 67 117 2,4 11,1 0,8 XST-10-30-1 42,00

15 150 1 91 94 6,4 17,4 0,8 XST-12-150-1 136,00

30 30 1 67 117 2,4 38,1 0,9 XST-30-30-1 195,00

Nickel FeedthroughsU

[kV]I

[A]Pins A

[mm]B

[mm]C

[mm]D

[mm]E


1 7 1 25 57 1,3 6,3 0,4 XST-1-7-1-Ni 42,00

1 7 2 54 48 1,3 19,0 0,8 XST-1-7-2-Ni 70,00

1 7 4 54 48 1,3 19,0 0,8 XST-1-7-4-Ni 108,00

10 15 1 67 117 2,4 11,1 0,8 XST-10-15-1-Ni 44,00

20 15 1 81 143 2,4 19,0 0,8 XST-20-15-1-Ni 112,00

Stainless Steel FeedthroughsU

[kV]I

[A]Pins A

[mm]B

[mm]C

[mm]D

[mm]E


1 1 1 25 57 1,3 6,3 0,4 XST-1-1-1-SS 50.00

1 1 2 54 48 1,3 19,0 0,8 XST-1-1-2-SS 71.00

1 1 4 54 48 1,3 19,0 0,8 XST-1-1-4-SS 110.00

DC

A B

E

We can weld this adapter onto a component of your choice, or you can do the welding yourself. Electrical specifications are based on a dry atmosphere on the air side and a pressure level of <10-4 mbar on the vacuum side.

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbarq Other conductor materials available upon requestq Other voltages and currents available on request

q Voltage: 1 - 30 kV DCq Current: 1 - 600 amperesq Pins: 1 - 8q Weld lip material: Stainless steel

Feedthroughs

332 Catalog 2010



ISO-KF

CF

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 67 35 1,3 120XST016-1-20-1 110,00

16 2 67 35 1,3 120XST016-1-20-2 125,00

16 4 67 35 1,3 120XST016-1-20-4 145,00

25 1 67 35 1,3 120XST025-1-20-1 120,00

25 2 57 45 1,3 120XST025-1-20-2 140,00

25 4 67 35 1,3 120XST025-1-20-4 190,00

40 1 67 35 1,3 120XST040-1-20-1 130,00

40 2 53 49 1,3 120XST040-1-20-2 160,00

40 4 53 49 1,3 120XST040-1-20-4 170,00

50 1 67 35 1,3 120XST050-1-20-1 135,00

50 2 67 35 1,3 120XST050-1-20-2 155,00

50 4 53 49 1,3 120XST050-1-20-4 180,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 48 54 1.3 420XST016-1-20-1 120,00

16 2 67 35 1,3 420XST016-1-20-2 130,00

16 4 67 35 1,3 420XST016-1-20-4 145,00

40 1 67 35 1,3 420XST040-1-20-1 130,00

40 2 55 46 1,3 420XST040-1-20-2 170,00

40 4 53 49 1,3 420XST040-1-20-4 185,00

63 1 67 35 1,3 420XST063-1-20-1 155,00

63 2 67 35 1,3 420XST063-1-20-2 190,00

63 4 67 35 1,3 420XST063-1-20-4 225,00

A B

C

A B

C

Electrical Feedthrough, Flanged, 1 kV, 20 AElectrical specifications are based on a dry atmosphere on the air side and a pressure level <10-4 mbar on the vacuum side.

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Voltage: 1 kV DC

q Current: 20 amperesq Pins: 1 - 4q Flange material: Stainless steelq Conductor material: Copperq Other conductor materials available upon request

Feedthroughs

Catalog 2010 333



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 49 53 1,3 120XST016-5-15-1 135,00

16 2 47 55 1,3 120XST016-5-15-2 145,00

16 4 47 55 1,3 120XST016-5-15-4 165,00

25 1 47 55 1,3 120XST025-5-15-1 155,00

25 2 47 55 1,3 120XST025-5-15-2 160,00

25 4 47 55 1,3 120XST025-5-15-4 200,00

40 1 47 55 1,3 120XST040-5-15-1 185,00

40 2 47 55 1,3 120XST040-5-15-2 215,00

40 4 47 55 1,3 120XST040-5-15-4 235,00

50 1 47 55 1,3 120XST050-5-15-1 215,00

50 2 47 55 1,3 120XST050-5-15-2 235,00

50 4 47 55 1,3 120XST050-5-15-4 300,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 47 55 1,3 420XST016-5-15-1 125,00

16 2 60 41 1,3 420XST016-5-15-2 145,00

16 4 47 55 1,3 420XST016-5-15-4 165,00

40 1 47 55 1,3 420XST040-5-15-1 155,00

40 2 47 55 1,3 420XST040-5-15-2 180,00

40 4 47 55 1,3 420XST040-5-15-4 170,00

63 1 47 55 1,3 420XST063-5-15-1 190,00

63 2 47 55 1,3 420XST063-5-15-2 210,00

63 4 47 55 1,3 420XST063-5-15-4 255,00

ISO-KF

CF

A B

C

A B

C

Electrical Feedthrough, Flanged, 5 kV, 15 AElectrical specifications are based on a dry atmosphere on the air side and a pressure level of <10-4 mbar on the vacuum side.

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbarq Voltage: 5 kV DC


Feedthroughs

334 Catalog 2010



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 50 143 2,4 120XST016-5-30-1 110,00

16 2 50 143 2,4 120XST016-5-30-2 185,00

25 1 50 143 2,4 120XST025-5-30-1 165,00

25 2 50 143 2,4 120XST025-5-30-2 195,00

40 1 50 143 2,4 120XST040-5-30-1 145,00

40 2 50 134 2,4 120XST040-5-30-2 195,00

40 4 50 134 2,4 120XST040-5-30-4 265,00

50 1 50 134 2,4 120XST050-5-30-1 155,00

50 2 50 134 2,4 120XST050-5-30-2 210,00

50 4 50 143 2,4 120XST050-5-30-4 300,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 52 132 2,4 420XST016-5-30-1 110,00

16 2 52 132 2,4 420XST016-5-30-2 185,00

40 1 57 135 2,4 420XST040-5-30-1 130,00

40 2 57 135 2,4 420XST040-5-30-2 190,00

40 3 57 135 2,4 420XST040-5-30-3 220,00

40 4 57 135 2,4 420XST040-5-30-4 265,00

63 1 57 135 2,4 420XST063-5-30-1 150,00

63 2 57 135 2,4 420XST063-5-30-2 285,00

63 4 57 135 2,4 420XST063-5-30-4 310,00

ISO-KF

CF

A B

C

A B

C

Electrical Feedthrough, Flanged, 5 KV, 30 AElectrical specifications are based on a dry atmosphere on the air side and a pressure level of <10-4 mbar on the vacuum side.



Feedthroughs

Catalog 2010 335



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 59 125 2,4 120XST016-10-30-1 165,00

16 2 59 125 2,4 120XST016-10-30-2 225,00

25 1 59 125 2,4 120XST025-10-30-1 185,00

25 2 59 125 2,4 120XST025-10-30-2 240,00

40 1 59 125 2,4 120XST040-10-30-1 185,00

40 2 59 125 2,4 120XST040-10-30-2 230,00

40 4 59 125 2,4 120XST040-10-30-4 320,00

50 1 59 125 2,4 120XST050-10-30-1 215,00

50 2 59 125 2,4 120XST050-10-30-2 250,00

50 4 59 125 2,4 120XST050-10-30-4 340,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 63 122 2,4 420XST016-10-30-1 165,00

16 2 67 117,4 2,4 420XST016-10-30-2 225,00

40 1 67 117,4 2,4 420XST040-10-30-1 190,00

40 2 67 117,4 2,4 420XST040-10-30-2 235,00

40 4 67 117,4 2,4 420XST040-10-30-4 320,00

63 1 67 117,4 2,4 420XST063-10-30-1 165,00

63 2 67 117,4 2,4 420XST063-10-30-2 220,00

63 4 67 117,4 2,4 420XST063-10-30-4 370,00

ISO-KF

CF

A B

C

A B

C


q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbarq Voltage: 10 kV DC


Feedthroughs

336 Catalog 2010



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

40 1 105 121 2,4 120XST040-30-30-1 245,00

ISO-KF

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

40 1 105 121 2,4 420XST040-30-30-1 240,00

CF

A B

C

A B

C



q Current: 30 amperesq Pins: 1q Flange material: Stainless steelq Conductor material: Copperq Other conductor materials available upon request

Feedthroughs

Catalog 2010 337



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 80 105 6,35 120XST016-5-150-1 110,00

25 1 80 105 6,35 120XST025-5-150-1 120,00

40 1 80 105 6,35 120XST040-5-150-1 115,00

40 2 80 105 6,35 120XST040-5-150-2 220,00

50 1 80 105 6,35 120XST050-5-150-1 135,00

50 2 80 105 6,35 120XST050-5-150-2 260,00

50 4 80 105 6,35 120XST050-5-150-4 370,00

ISO-KF

CFFlange Size

[DN]Pins A

[mm]B

[mm]C


16 1 81 103 6,35 420XST016-5-150-1 115,00

40 1 81 103 6,35 420XST040-5-150-1 125,00

40 2 81 103 6,35 420XST040-5-150-2 235,00

40 3 81 103 6,35 420XST040-5-150-3 310,00

40 1 81 103 6,35 420XST040-5-150-4 375,00

63 1 81 105 6,35 420XST063-5-150-1 170,00

63 2 81 105 6,35 420XST063-5-150-2 250,00

63 4 81 105 6,35 420XST063-5-150-4 395,00

A B

C

A B

C




Feedthroughs

338 Catalog 2010



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 91 93 6,4 120XST016-12-150-1 315,00

25 1 91 93 6,4 120XST025-12-150-1 280,00

40 1 91 93 6,4 120XST040-12-150-1 280,00

40 2 91 93 6,4 120XST040-12-150-2 575,00

50 1 91 93 6,4 120XST050-12-150-1 225,00

50 2 91 93 6,4 120XST050-12-150-2 360,00

50 4 91 93 6,4 120XST050-12-150-4 540,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 83 102 6,4 420XST016-12-150-1 260,00

40 1 87 97 6,4 420XST040-12-150-1 230,00

40 2 92 82 6,4 420XST040-12-150-2 545,00

63 1 92 82 6,4 420XST063-12-150-1 280,00

63 2 92 82 6,4 420XST063-12-150-2 385,00

63 4 92 82 6,4 420XST063-12-150-4 585,00

ISO-KF

CF

A B

C

A B

C




Feedthroughs

Catalog 2010 339



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

40 1 97 88 19,05 120XST040-3-600-1 255,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

40 1 97 88 19,05 420XST040-3-600-1 250,00

ISO-KF

CF

A B

C

A B

C



q Current: 600 amperesq Pins: 1q Flange material: Stainless steelq Conductor material: Copperq Other conductor materials available upon request

Feedthroughs

340 Catalog 2010



CFFlange Size

[DN]U

[kV]I

[A]Pins A

[mm]B

[mm]C


16 10 30 1 52 135 2,4 420XSP016-10-30-1 185,00

16 5 30 1 43 135 2,4 420XSP016-5-30-1 130,00

40 10 30 1 52 135 2,4 420XSP040-10-30-1 205,00

40 10 30 2 52 135 2,4 420XSP040-10-30-2 270,00

40 10 30 4 52 135 2,4 420XSP040-10-30-4 390,00

40 5 30 1 43 135 2,4 420XSP040-5-30-1 160,00

40 5 30 2 43 135 2,4 420XSP040-5-30-2 230,00

40 5 30 4 57 135 2,4 420XSP040-5-30-4 370,00

ISO-KFFlange Size

[DN]U

[kV]I

[A]Pins A

[mm]B

[mm]C


16 10 30 1 52 135 2,4 120XSP016-10-30-1 185,00

16 5 30 1 43 135 2,4 120XSP016-5-30-1 120,00

40 10 30 1 52 135 2,4 120XSP040-10-30-1 205,00

40 10 30 2 52 135 2,4 120XSP040-10-30-2 270,00

40 10 30 4 52 135 2,4 120XSP040-10-30-4 395,00

40 5 30 1 43 135 2,4 120XSP040-5-30-1 145,00

40 5 30 2 43 135 2,4 120XSP040-5-30-2 225,00

40 5 30 4 57 135 2,4 120XSP040-5-30-4 350,00

A B

C

A B

C

Electrical Feedthrough, Flanged, with Silicone PlugElectrical specifications are based on a dry atmosphere on the air side and a pressure level of <10-4 mbar on the vacuum side.

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Voltage: 5/10 kV DCq Current: 30 amperesq Plug and 2.5 m silicone cable (~6.5 ft) included (-55 to 125 °C)

q Other conductor materials available upon requestq Up to 8 pins available upon requestq Conductor material: Copperq Flange material: Stainless steel

Feedthroughs

Catalog 2010 341



Plug-on Connector q Connector material: BeCuq Quantity: 10 per package q Max. temperature: Air: 150 °C, vacuum: 200 °C

Contact Clampq Clamp material: BeCuq Max. temperature: Air: 150 °C, vacuum: 200 °C

Leiterdurchmesser[mm]

A[mm]

B[mm]

C[mm]

Artikel Nr. Preis €

1,27 1,3 17,5 1,3 XAK015A 70,00

2,39 2,4 17,5 2,4 XAK030A 70,00

Wire Ø [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

1,3 12,7 4,75 1,5 XKL015A 8,00

2,4 14,2 6,35 3,1 XKL030A 8,00

6,6 25,4 12,7 6,6 XKL150A 14,00

Wire Ø [mm]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

1,3 17,5 6,35 1,3 1,3 XAK015A 70,00

2,4 17,5 6,35 2,4 1,3 XAK030A 70,00

A

C B

A

C D B

Feedthroughs

342 Catalog 2010

Multi-pin


ISO, Male

CF, Male

Weld Adapter, Male

Flange Size [DN]

Pins Item No. Price €

40 9 120XSD040-9 375,00

50 15 120XSD050-15 455,00

63 25 320XSD063-25 515,00

100 50 320XSD100-50 875,00


9 XSD-9 255,00

15 XSD-15 270,00

25 XSD-25 300,00

50 XSD-50 405,00

Flange Size [DN]


40 9 420XSD040-9 355,00

63 15 420XSD063-15 450,00

63 25 420XSD063-25 460,00

63 2 x 25 420XSD063-25-2 720,00

100 50 420XSD100-50 650,00

D-Sub Socket, Flanged Electrical specifications are based on a dry atmosphere on the air side and a pressure level of <10-4 mbar on the vacuum side.

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 300 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q 500 volt s AV, 500 volts DC, 5 amperes per pinq Pins: 9 to 50q Pin material: Stainless steel/gold-platedq Flange material: Stainless steelq Custom designs upon request

Feedthroughs

Catalog 2010 343

Multi-pin


D-sub Plug, Female, Vacuum Side, PEER


9 XSD-9-s-vac 175,00

15 XSD-15-s-vac 225,00

25 XSD-25-s-vac 235,00

50 XSD-50-s-vac 400,00

D-sub plug, Female, Atmosphere Side


9 XSD-9-s-atm 14,00

15 XSD-15-s-atm 16,00

25 XSD-25-s-atm 19,00

50 XSD-50-s-atm 28,00

Pins for D-sub Plug, Vacuum and Atmosphere Side


10 XSD-contacts 25,50

Flat Cable for D-sub, Vacuum-stable

Pins Item No. Price per Meter [€]

9 XSD-9-cable 130,00

15 XSD-15-cable 175,00

25 XSD-25-cable 215,00

50 XSD-50-cable 425,00

q Leakage rate: 10-10 mbar l/s q Temperature range, vacuum side: -100 to 400 °C q Heating/cooling rate: max. 25 °C /min q Operating pressure: 0 - 1000 mbar q Atmosphere side: MIL-C-5015-compliant plug included (-65 to 125 °C), with soldering pinsq Conductor material: Alumel q Weld casing material: Stainless steelq 700 volts DCq Up to 10 amperes per pin (do not exceed maximum total current)q Contact in vacuum through soldering or contact clamp XKL 015 Aq Pins: 4 - 20

Pins Amperes A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

4 28 62 79 1,42 19 0,8 XSS-4 240,00

6 36 62 79 1,42 19 0,8 XSS-6 260,00

10 50 62 79 1,42 19 0,8 XSS-10 430,00

20 75 64 88 1,42 35 0,8 XSS-20 515,00

BA

CDE

Multi-pin Weld Adapter, 700V DC, 10 AElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

* with crimping tool for crimping twisted contacts

q Temperature range, vacuum side: -55 to 80 °C

q Conductor: Annealed copper, silver-plated, with Kapton isolation and monofilament PEEK tissueq Temperature range, vacuum side: -55 to 250 °Cq Conductor Ø: 0.89 mm

q Temperature range, vacuum side: -196 to 250 °C

Feedthroughs

344 Catalog 2010

Multi-pin


q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Plug included, atmosphere side: MIL-C-5015- compliant (-65 to 125 °C), with soldering pinsq Conductor material: Alumel

Flange Size [DN]

Pins Amperes A [mm]

B [mm]

C [mm]

Item No. Price €

16 4 28 74,4 67 1,42 120XSS016-4 275,00

16 6 36 74,4 67 1,42 120XSS016-6 295,00

16 10 50 74,4 67 1,42 120XSS016-10 465,00

25 4 28 62 79 1,42 120XSS025-4 290,00

25 6 36 62 79 1,42 120XSS025-6 315,00

25 10 50 62 79 1,42 120XSS025-10 535,00

40 4 28 62 79 1,42 120XSS040-4 280,00

40 6 36 62 79 1,42 120XSS040-6 300,00

40 10 50 62 97 1,42 120XSS040-10 470,00

40 20 75 64 88 1,42 120XSS040-20 585,00

50 4 28 62 79 1,42 120XSS050-4 315,00

50 6 36 62 79 1,42 120XSS050-6 340,00

50 10 50 62 79 1,42 120XSS050-10 500,00

50 20 75 64 88 1,42 120XSS050-20 594,00

Flange Size [DN]

Pins Amperes A [mm]

B [mm]

C [mm]

Item No. Price €

16 4 28 74,4 67 1,42 420XSS016-4 275,00

16 6 36 74,4 67 1,42 420XSS016-6 295,00

16 10 50 74,4 67 1,42 420XSS016-10 465,00

40 4 28 63 78 1,42 420XSS040-4 290,00

40 6 36 63 78 1,42 420XSS040-6 310,00

40 10 50 63 53 1,42 420XSS040-10 480,00

40 20 75 66 87 1,42 420XSS040-20 595,00

63 4 28 63 78 1,42 420XSS063-4 330,00

63 6 36 63 78 1,42 420XSS063-6 350,00

63 10 50 63 53 1,42 420XSS063-10 555,00

63 20 75 66 87 1,42 420XSS063-20 960,00

ISO-KF

CF

q Flange material: Stainless steelq 700 volts DCq Up to 10 amperes per pin (do not exceed maximum total current)q Contact in vacuum through soldering or contact clamp XKL 015 Aq Pins: 4 - 20

BA

C

BA

C

Multi-pin, Flanged, 700V DC, 10 AElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Feedthroughs

Catalog 2010 345

Thermocouple


Type K Chromel (+) / Alumel (-), Feedthrough with Thermoconductors: Chromel/Alumell

Type S Platinum 10% Rhodium (+) / Platinum (-), Feedthrough with Thermoelectrically Adapted Equalizers; Temperature Range at Connections: 0 to 200 °C

Thermocouple pairs

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

1 33 114 89 19 0,9 XTK-1 105,00

2 54 114 89 19 0,9 XTK-2 160,00

3 57 114 89 19 0,9 XTK-3 285,00

4 51 102 76 38 0,9 XTK-4 435,00

5 64 102 76 38 0,9 XTK-5 535,00

Thermocouple pairs

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

1 44 114 89 19 0,9 XTS-1 110,00

2 60 114 89 19 0,9 XTS-2 200,00

3 51 114 89 19 0,9 XTS-3 365,00

q Leakage rate: 10-10 mbar l/s q Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbarq Vacuum side: Lugs for screw connections (screws included)q Atmosphere side: Type K miniature plugs included; Type S lugs for screw connections (screws included)q Thermocouple pairs: 1 - 5q Weld casing material: Stainless steelq Types C, E, J, T, N, R, S available upon request

A B

C

DE

Thermocouple Feedthrough, Weld Adapter

Feedthroughs

346 Catalog 2010

Thermocouple


ISO-KF

CF

q ISO-KF or CF flangeq Flange material: Stainless steelq Type K: Chromel (+) / Alumel (-)q Types C, E, J, T, N, R, S available upon request

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Vacuum side: Lugs for screw connectionsq Atmosphere side: Miniature plug included (-65 to 125 °C)

Flange Size [DN]

Wire Pairs A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 47 102 76 120XTK016-1 125,00

16 2 67 102 76 120XTK016-2 190,00

16 3 71 102 76 120XTK016-3 284,00

25 1 52 108 85 120XTK025-1 152,00

25 2 67 102 76 120XTK025-2 243,00

40 1 47 110 85 120XTK040-1 157,00

40 2 67 102 76 120XTK040-2 248,00

40 4 51 99 74 120XTK040-4 578,00

40 5 58 99 74 120XTK040-5 730,00

50 1 47 102 76 120XTK050-1 162,00

50 2 67 102 76 120XTK050-2 290,00

Flange Size [DN]

Wire Pairs A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 47 102 76 420XTK016-1 125,00

16 2 67 104 78 420XTK016-2 190,00

16 3 71 102 76 420XTK016-3 285,00

40 1 47 102 76 420XTK040-1 160,00

40 2 47 102 76 420XTK040-2 280,00

40 4 50 100 75 420XTK040-4 480,00

40 5 57 100 75 420XTK040-5 515,00

63 1 47 102 76 420XTK063-1 350,00

63 2 47 102 76 420XTK063-2 440,00

A

C

B

A

C

B

Thermocouple Feedthrough, Flanged, Type K

Feedthroughs

Catalog 2010 347

Thermocouple


Pins A [mm]

B [mm]

C [mm]

D [mm]

E Weld lip thickness


2 62 79 1,4 19 0,8 XTK-2-S 320,00

3 62 79 1,4 19 0,8 XTK-3-S 355,00

5 62 79 1,4 19 0,8 XTK-5-S 620,00

10 64 89 1,4 32 0,9 XTK-10-S 820,00

Thermocouple Feedthrough, Type K, Weld Adapter, with MS Plug

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 2 69 69 1,4 420XTK016-2-S 385,00

16 3 69 69 1,4 420XTK016-3-S 425,00

16 5 69 69 1,4 420XTK016-5-S 505,00

40 10 66 89 1,4 420XTK040-10-S 950,00

40 2 57 86 1,4 420XTK040-2-S 405,00

40 3 57 80 1,4 420XTK040-3-S 435,00

40 5 57 80 1,4 420XTK040-5-S 535,00

CF

A B

CD

E

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Types C, E, J, T, N, R, S available upon request

q Atmosphere side: MIL-C-5015-compliant MS plug included (-65 to 125 °C)q Flange material: Stainless steelq Type K: Chromel (+) / Alumel (-)

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 2 69 69 1,4 120XTK016-2-S 280,00

16 3 69 69 1,4 120XTK016-3-S 402,00

16 5 69 69 1,4 120XTK016-5-S 490,00

40 10 64 89 1,4 120XTK040-10-S 921,00

40 2 56 81 1,4 120XTK040-2-S 396,00

40 3 69 69 1,4 120XTK040-3-S 402,00

40 5 56 81 1,4 120XTK040-5-S 518,00

ISO-KF A B

C

A B

C

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar

q Atmosphere side: MIL-C-5015-compliant MS plug included (-65 to 125 °C)q Type K: Chromel (+) / Alumel (-)q Types E and J available upon request

Thermocouple Feedthrough, Type K, Flanged, with MS Plug

Feedthroughs

348 Catalog 2010

Combi-Feedthroughs


Combi-Feedthrough Weld Adapter, Electrical and Thermocouple, Type K

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Thermoelement includes standard miniature plug (-65 to 125 °C)

q Thermocouple, 1 pair type K: Chromel(+) / Alumel (-) (types C, E and J available upon request)q 2 conductors made of copper; nickel available upon requestq Weldable into components of your choiceq Weld casing material: Stainless steel

q Thermocouple, 1 pair type K: Chromel(+) / Alumel (-) (types C, E and J available upon request)q 2 conductors made of copper; nickel available upon requestq Other flange combinations are available on short noticeq Flange material: Stainless steel

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Thermoelement includes standard miniature plug (-65 to 125 °C)

U [Volt]

I [Amp]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

1 15 75 127 1,3 19 0,9 XKO-1-15 230,00

5 30 70,4 113 2,4 19 0,9 XKO-5-30 270,00

Flange Size [DN]

U [Volt]

I [Amp]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 1 15 88 114 1,3 105 120XKO016-1-15 260,00

16 5 30 83 114 2,4 102 120XKO016-5-30 285,00

Flange Size [DN]

U [Volt]

I [Amp]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

16 1 15 88 114 1,3 102 420XKO016-1-15 240,00

16 5 30 83 114 2,4 102 420XKO016-5-30 260,00

40 1 15 88 114 1,3 102 420XKO040-1-15 280,00

40 5 30 72 126 2,4 87 420XKO040-5-30 310,00

ISO-K

CF

A B

D

C

E

D

A B

C

A B

C

D

Electrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Combi-Feedthrough, Flanged, Electrical and Thermocouple, Type KElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Feedthroughs

Catalog 2010 349



q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar

Shield A [mm]

B [mm]

C [mm]

Item No. Price €

Floating 34 10 33 XBF 160,00

Floating 34 10 25 XBF-Mini 165,00

Grounded 34 10 13 XBG 45,00

Grounded 34 10 13 XBG-os 43,00

Shield A [mm]

B [mm]

C [mm]

Item No. Price €

Floating 43,4 63 19 XMF-D 380,00

Grounded 41,4 52 19 XMG-D 230,00

BNC 500 V DC, 3 A

MHV, Double-ended 500 V DC, 3 A

BA

C

Grounded

BA

C

Floating

BA

C

Floating

Shield A [mm]

B [mm]

C [mm]

Item No. Price €

Floating 63 43,4 19 XBF-D 380,00

Grounded 41,4 52 19 XBG-D 245,00

BNC, Double-ended 500 V DC, 3 A

Floating

C

A B

Grounded

A B

C

Shield A [mm]

B [mm]

C [mm]

Item No. Price €

Floating 35 9 32,6 XMF 170,00

Floating 34 10 25 XMF-Mini 240,00

Grounded 34 9 13 XMG 45,00

Grounded 34 9 13 XMG-os 43,00

MHV 5000 V DC, 3 ABA

C

Floating

BC

A

Grounded

Grounded

C

A B

suffix-os: Plug not included

suffix-os: Plug not included

Coaxial Feedthrough, Weld AdapterElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Feedthroughs

350 Catalog 2010



Shield A[mm]

B[mm]

C[mm]

Item No. Price €

Floating 23 27 33 XSF-5 195,00

Grounded 41 9,4 13 XSG-5 82,00

Grounded, exposed 26 24 13 XSG-5-exp 103,00

Grounded 61 10 13 XSG-10 195,00


Grounded 96 9 16 XSG-20 265,00


SHV 5 to 20 kV DC, 5 to 15 A

Plug, Atmosphere Side (-65 to 165 °C)

Item Item No. Price €

BNC XB-st 8,00

MHV XM-st 13,00

SHV, 5 kV XS5-st 25,00

BA

C

Grounded exposed

BA

C

Floating

BA

C

Grounded

Feedthroughs

Catalog 2010 351



q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Flange material: Stainless steelq 500 volts DC, 3 amperes per pin

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 36 8 2,4 120XBG016-1 115,00

25 1 36 8 2,4 120XBG025-1 135,00

40 1 36 8 2,4 120XBG040-1 123,00

40 2 36 8 2,4 120XBG040-2 180,00

40 3 36 8 2,4 120XBG040-3 240,00

40 4 36 8 2,4 120XBG040-4 382,00

50 1 36 8 2,4 120XBG050-1 130,00

50 2 36 8 2,4 120XBG050-2 190,00

50 3 36 8 2,4 120XBG050-3 300,00

50 4 36 8 2,4 120XBG050-4 380,00

ISO-KF, BNC, Grounded Shield

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 35 8 2,4 420XBG016-1 130,00

40 1 35 8 2,4 420XBG040-1 136,00

40 2 35 8 2,4 420XBG040-2 185,00

40 3 35 8 2,4 420XBG040-3 259,00

40 4 35 8 2,4 420XBG040-4 328,00

CF, BNC, Grounded Shield

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 65 17 2,4 120XBF016-1 273,00

40 1 23 21 2,4 120XBF040-1 275,00

ISO-KF, BNC, Floating Shield

BA

C

BA

C

BA

C

Coaxial Feedthrough, Flanged, BNCElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Feedthroughs

352 Catalog 2010



Flange Size [DN]

Pins A [mm]

B [mm]

Item No. Price €

16 1 64 29 120XBG016-1-D 370,00

25 1 64 30 120XBG025-1-D 369,00

40 1 41,4 52 120XBG040-1-D 369,00

50 1 41,4 52 120XBG050-1-D 385,00

50 2 41,4 52 120XBG050-2-D 620,00

50 3 41,4 52 120XBG050-3-D 875,00

ISO-KF, BNC, Double-ended, Grounded Shield A B

Flange Size [DN]

Pins A [mm]

B [mm]

Item No. Price €

16 1 29 64 420XBG016-1-D 370,00

40 1 40 53 420XBG040-1-D 370,00

40 2 40 53 420XBG040-2-D 621,00

50 3 40 53 420XBG040-3-D 873,00

CF, BNC, Double-ended, Grounded Shield A B

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 51 32 2,4 420XBF016-1 266,00

40 1 18 25 2,4 420XBF040-1 281,00

CF, BNC, Floating Shield BA

C

Flange Size [DN]

Pins A [mm]

B [mm]

Item No. Price €

16 1 75 31 120XBF016-1-D 490,00

25 1 63 43 120XBF025-1-D 520,00

40 1 63 43 120XBF040-1-D 490,00

ISO-KF, BNC, Double-ended, Floating Shield A B

Feedthroughs

Catalog 2010 353



Flange Size [DN]

Pins A [mm]

B [mm]

Item No. Price €

40 1 64 42 420XBF040-1-D 491,00

CF, BNC, Double-ended, Floating Shield A B

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Flange material: Stainless steelq 5000 volts DC, 3 amperes per pin

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 36 6,4 2,4 120XMG016-1 115,00

25 1 36 6,4 2,4 120XMG025-1 130,00

40 1 34 9 2,4 120XMG040-1 140,00

40 2 34 9 2,4 120XMG040-2 175,00

40 3 34 9 2,4 120XMG040-3 235,00

40 4 34 9 2,4 120XMG040-4 285,00

50 1 34 9 2,4 120XMG050-1 160,00

50 2 34 9 2,4 120XMG050-2 225,00

50 3 34 9 2,4 120XMG050-3 252,00

50 4 34 9 2,4 120XMG050-4 328,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 35 8 2,4 420XMG016-1 130,00

40 1 35 8 2,4 420XMG040-1 135,00

40 2 35 8 2,4 420XMG040-2 185,00

40 3 35 8 2,4 420XMG040-3 260,00

40 4 35 8 2,4 420XMG040-4 335,00

ISO-KF, MHV, Grounded Shield

CF, MHV, Grounded Shield

BA

C

BA

C

Coaxial Feedthrough, Flanged, MHVElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Feedthroughs

354 Catalog 2010



Flange Size [DN]

Pins A [mm]

B [mm]

Item No. Price €

16 1 64 30 120XMG016-1-D 370,00

25 1 64 30 120XMG025-1-D 390,00

40 1 64 30 120XMG040-1-D 420,00

40 2 64 30 120XMG040-2-D 610,00

50 1 41,4 52 120XMG050-1-D 390,00

50 2 41,4 52 120XMG050-2-D 645,00

50 3 41,4 52 120XMG050-3-D 873,00

Flange Size [DN]

Pins A [mm]

B [mm]

Item No. Price €

16 1 75 28,4 120XMF016-1-D 490,00

25 1 75 28,4 120XMF025-1-D 520,00

40 1 75 28,4 120XMF040-1-D 540,00

ISO-KF, MHV, Double-ended, Grounded Shield

CF, MHV, Double-ended, Grounded Shield

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 51 32 2,4 420XMF016-1 265,00

40 1 18 25 2,4 420XMF040-1 290,00

CF, MHV, Floating Shield

A B

BA

C

A B

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 66 17 2,4 120XMF016-1 275,00

40 1 53 30 2,4 120XMF040-1 273,00

ISO-KF, MHV, Floating Shield BA

C

Feedthroughs

Catalog 2010 355



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 43 7 2,4 120XSG016-1 158,00

25 1 43 7 2,4 120XSG025-1 170,00

40 1 41 9,4 2,4 120XSG040-1 165,00

40 2 41 9,4 2,4 120XSG040-2 250,00

40 3 41 9,4 2,4 120XSG040-3 340,00

40 4 41 9,4 2,4 120XSG040-4 445,00

50 1 41 9,4 2,4 120XSG050-1 230,00

50 2 41 9,4 2,4 120XSG050-2 340,00

50 3 41 9,4 2,4 120XSG050-3 435,00

50 4 41 9,4 2,4 120XSG050-4 550,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 42 8 2,4 420XSG016-1 175,00

40 1 42 8 2,4 420XSG040-1 180,00

40 2 42 8 2,4 420XSG040-2 275,00

40 3 42 8 2,4 420XSG040-3 395,00

40 4 42 8 2,4 420XSG040-4 505,00

ISO-KF, SHV-5, Grounded Shield

CF, SHV-5, Grounded Shield

BA

CBA

C

q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -100 to 400 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbarq Flange material: Stainless steelq 5000 volts DC, 5 amperes per pinq Type N; SMA and Microdot available upon request

Coaxial Feedthrough, Flanged, SHVElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Feedthroughs

356 Catalog 2010



Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 51 37 2,4 120XSF016-1 335,00

40 1 51 37 2,4 120XSF040-1 321,00

Flange Size [DN]

Pins A [mm]

B [mm]

C [mm]

Item No. Price €

16 1 35 52 2,4 420XSF016-1 350,00

40 1 30 57 2,4 420XSF040-1 350,00

ISO-KF, SHV-5, Floating Shield

CF, SHV-5, Floating Shield

BA

C

BA

C

Feedthroughs

Catalog 2010 357

Fluid Feedthroughs


q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: Up to 300 °Cq Operating pressure: 0 - 2500 mbar q Flange material: Stainless steel

ISO-KF Fluid Feedthrough, Single Tube Please note: VCR adapters cannot be installed on the vacuum side of DN 16 flanges due to their size.

ISO-KF Fluid Feedthrough, Double Tube

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

Item No. Price €

16 P P 75 45 6 120XFL016-PP 90,00

16 P S 103 45 6 120XFL016-PS 110,00

16 P V 105 45 6 120XFL016-PV 125,00

16 S P 75 73 6 120XFL016-SP 110,00

16 S S 103 73 6 120XFL016-SS 140,00

40 P P 75 45 6 120XFL040-PP 80,00

40 P S 103 45 6 120XFL040-PS 115,00

40 P V 105 45 6 120XFL040-PV 130,00

40 S P 75 73 6 120XFL040-SP 115,00

40 S S 103 73 6 120XFL040-SS 135,00

40 V P 75 75 6 120XFL040-VP 130,00

40 V V 105 75 6 120XFL040-VV 145,00

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

D[mm]

E[mm]

Item No. Price €

40 P P 75 45 75 45 6 120XFL040-2-PP 100,00

40 P S 103 45 75 73 6 120XFL040-2-PS 160,00

40 P V 105 45 75 75 6 120XFL040-2-PV 180,00

40 S P 75 73 103 45 6 120XFL040-2-SP 160,00

40 S S 103 73 103 73 6 120XFL040-2-SS 215,00

40 V P 75 75 105 45 6 120XFL040-2-VP 180,00

40 V V 105 75 105 75 6 120XFL040-2-VV 260,00

A B

C

A B

E

CD

Esuffixes: P = tube end; V = VCR male; S = Swagelok fitting

suffixes: P = tube end; V = VCR male; S = Swagelok fitting

Fluid Feedthrough

Feedthroughs

358 Catalog 2010

Fluid Feedthroughs


CF Fluid Feedthrough, Single Tube Please note: VCR adapters cannot be installed on the vacuum side of DN 16 flanges due to their size.

CF Fluid Feedthrough, Single Tube

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

Item No. Price €

16 P P 75 45 6 420XFL016-PP 100,00

16 P S 103 45 6 420XFL016-PS 120,00

16 P V 105 45 6 420XFL016-PV 135,00

16 S P 75 73 6 420XFL016-SP 120,00

16 S S 73 103 6 420XFL016-SS 150,00

40 P P 75 45 6 420XFL040-PP 90,00

40 P S 103 45 6 420XFL040-PS 125,00

40 P V 105 45 6 420XFL040-PV 140,00

40 S P 75 73 6 420XFL040-SP 125,00

40 S S 103 73 6 420XFL040-SS 145,00

40 V P 75 75 6 420XFL040-VP 140,00

40 V V 105 75 6 420XFL040-VV 155,00

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

D[mm]

E[mm]

Item No. Price €

40 P P 75 45 75 45 6 420XFL040-2-PP 110,00

40 P S 103 45 76 73 6 420XFL040-2-PS 170,00

40 P V 105 45 75 74 6 420XFL040-2-PV 190,00

40 S P 75 73 104 45 6 420XFL040-2-SP 170,00

40 S S 104 73 103 73 6 420XFL040-2-SS 225,00

40 V P 75 75 104 45 6 420XFL040-2-VP 190,00

40 V V 105 75 104 74 6 420XFL040-2-VV 270,00

A B

C

A B

CD

E

E



Feedthroughs

Catalog 2010 359

Fluid Feedthroughs


q Flage-tube connection: Themally isolated tubeq Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: Up to 300 °Cq Operating pressure: 0 - 2500 mbar q Flange material: Stainless steel

ISO-KF Liquid Nitrogen Feedthrough, Single Tube Please note: VCR adapters cannot be installed on the vacuum side of DN 16 flanges due to their size.

ISO-KF Liquid Nitrogen Feedthrough, Double Tube

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

Item No. Price €

16 P P 75 45 6 120XFN016-PP 110,00

16 P S 103 45 6 120XFN016-PS 140,00

16 P V 45 105 6 120XFN016-PV 125,00

16 S P 75 73 6 120XFN016-SP 140,00

16 S S 103 73 6 120XFN016-SS 165,00

40 P P 75 45 6 120XFN040-PP 115,00

40 P S 103 45 6 120XFN040-PS 150,00

40 P V 105 45 6 120XFN040-PV 130,00

40 S P 75 73 6 120XFN040-SP 150,00

40 S S 103 73 6 120XFN040-SS 165,00

40 V P 75 75 6 120XFN040-VP 130,00

40 V V 105 75 6 120XFN040-VV 145,00

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

D[mm]

E[mm]

Item No. Price €

40 P P 45 75 45 75 6 120XFN040-2-PP 120,00

40 P S 45 103 73 75 6 120XFN040-2-PS 180,00

40 P V 45 105 75 75 6 120XFN040-2-PV 200,00

40 S P 73 75 45 103 6 120XFN040-2-SP 175,00

40 S S 73 103 73 103 6 120XFN040-2-SS 235,00

40 V P 75 75 45 105 6 120XFN040-2-VP 200,00

40 V V 75 105 75 105 6 120XFN040-2-VV 280,00

A B

C

A B

CD

E

E



Liquid Nitrogen Feedthrough

Feedthroughs

360 Catalog 2010

Fluid Feedthroughs


CF Liquid Nitrogen Feedthrough, Single Tube Please note: VCR adapters cannot be installed on the vacuum side of DN 16 flanges due to their size..

CF Liquid Nitrogen Feedthrough, Double Tube

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

Item No. Price €

16 P P 75 45 6 420XFN016-PP 120,00

16 P S 103 45 6 420XFN016-PS 150,00

16 P V 105 45 6 420XFN016-PV 135,00

16 S P 75 73 6 420XFN016-SP 150,00

16 S S 103 73 6 420XFN016-SS 175,00

40 P P 75 45 6 420XFN040-PP 155,00

40 P S 103 45 6 420XFN040-PS 165,00

40 P V 105 45 6 420XFN040-PV 170,00

40 S P 75 73 6 420XFN040-SP 165,00

40 S S 103 73 6 420XFN040-SS 230,00

40 V P 75 75 6 420XFN040-VP 170,00

40 V V 105 75 6 420XFN040-VV 190,00

Flange Size [DN]

Vacuum Side

Atmosphere Side

A [mm]

B [mm]

C [mm]

D[mm]

E[mm]

Item No. Price €

40 P P 45 75 45 75 6 420XFN040-2-PP 110,00

40 P S 45 103 73 75 6 420XFN040-2-PS 165,00

40 P V 45 105 75 75 6 420XFN040-2-PV 185,00

40 S P 73 75 45 103 6 420XFN040-2-SP 165,00

40 S S 73 103 73 103 6 420XFN040-2-SS 225,00

40 V P 75 75 45 105 6 420XFN040-2-VP 185,00

40 V V 75 105 75 105 6 420XFN040-2-VV 245,00

A B

C

A B

CD

E

E



Feedthroughs

Catalog 2010 361



q Leakage rate: 10-10 mbar l/sq Temperature range, vacuum side: -15 to 150 °Cq Pressure range: 10-7 mbar to 1000 mbar q Inner seal: FPMq Wire diameter: 1.5 mmq Other wire diameters available upon request.

Flange Size [DN]

A [mm]

Number of Wires

Item No. Price €

10 1 35 120XTD010-1 88,00

10 2 35 120XTD010-2 97,00

10 3 35 120XTD010-3 109,00

25 1 45 120XTD025-1 98,00

25 2 45 120XTD025-2 107,00

25 3 45 120XTD025-3 119,00

25 4 45 120XTD025-4 125,00

25 5 45 120XTD025-5 140,00

25 6 45 120XTD025-6 150,00

25 7 45 120XTD025-7 160,00

40 1 45 120XTD040-1 135,00

40 2 45 120XTD040-2 143,00

40 3 45 120XTD040-3 151,00

40 4 45 120XTD040-4 160,00

40 5 45 120XTD040-5 175,00

40 6 45 120XTD040-6 215,00

40 7 45 120XTD040-7 225,00

40 8 45 120XTD040-8 235,00

40 9 45 120XTD040-9 245,00

Stainless Steel A

Feedthrough for WiresWire feedthroughs can be used, for example, for mantle thermocouples.

Feedthroughs

362 Catalog 2010



q Leakage rate: 10-10 mbar l/sq Temperature range: 0 to 250 °Cq Heating/cooling rate: max. 25 °C /minq Operating pressure: 0 - 1000 mbar q Flange material: Stainless steel

Flange Size [DN]

kV A [mm]

B [mm]

C [mm]

Item No. Price €

16 20 92 25 16 120XIS016-20 290,00

16 35 117 50 16 120XIS016-35 390,00

40 15 102 50 35 120XIS040-15 305,00

40 3 58 6,4 35 120XIS040-3 300,00

Flange Size [DN]

kV A [mm]

B [mm]

C [mm]

Item No. Price €

16 20 92 25 16 420XIS016-20 300,00

16 35 117 50 16 420XIS016-35 400,00

40 15 107 50 32 420XIS040-15 350,00

40 3 67 6 32 420XIS040-3 310,00

63 8 114 19 58 420XIS063-8 1480,00

100 8 117 19 95 420XIS100-8 1750,00

160 15 140 38 152 420XIS160-15 2600,00

200 15 146 38 196 420XIS200-15 3800,00

Weld End kV A [mm]

B [mm]

C [mm]

Item No. Price €

19 mm 20 67 26 16 XIS016-20 220,00

19 mm 35 117 26 16 XIS016-35 340,00

38 mm 15 97 43 35 XIS040-15 210,00

38 mm 3 56 43 35 XIS040-3 190,00

63 mm 8 67 19 59 XIS063-8 740,00

101 mm 8 91 19 95 XIS100-8 980,00

154 mm 15 114 38 152 XIS150-15 1900,00

204 mm 15 118 38 197 XIS200-15 2700,00

ISO-KF Isolators

CF Isolators

Isolators with Weld Adapters

AB

C

A

B

C

A

B ØC

IsolatorElectrical specifications are based on ambient pressure on the air side and <10-4 mbar on the vacuum side.

Manipulators

Manipulators


Manipulators

Precision X/Y-axis Manipulator, UHV ...........................368

Precision Z-axis Manipulator .......................................370

Z-axis Fine Manipulator ..............................................372

Differentially Pumped Rotation Platform ....................373

Rotary Magnetic Feedthrough ....................................373

CF Shutter, Manual .....................................................374

CF Shutter, Pneumatic ................................................374

CF Bellows-sealed Rotary Feedthrough .......................375

Magnetically Guided Rotary/Linear Feedthrough ........376

Anti-twist Lock for Magnetically Guided Rotary/Linear Feedthrough .........................................377

Port Aligner with Diaphragm Bellows for Angular Adjustment ..............................................377

Elastomer-sealed Rotary/Linear Feedthrough .............378

Anti-twist Lock for Elastomer-sealed Rotary/Linear Feedthrough .........................................379

Clamping Device ........................................................379

Elastomer-sealed Rotary Feedthrough ........................380

Pneumatic Cylinder .....................................................380

Contents

Manipulators


TRINOS Product

X Y Z vx vy vz

Z-Manipulator - - a - - -

X/Y-Manipulator

a a - - - -

X/Y/Z-Manipulator a a a - - -

Linear Feedthrough

1 depending on assemly position

- - -

Rotary Feedthrough - - - 1 depending on assemly pos.

Rotary/Linear Feedthrough

1 depending on assemly position

-1 depending on assemly position

-

Differentially Pumped Rotation Platform

- - -1 depending on assemly

position

Z

X

Y

vz

vy

vx

Manipulators

Numerous science research processes and industrial manufacturing processes would not be possible without a vacuum environment. Most of these processes require that the position of samples or workpieces be altered within a vacuum chamber. TRINOS develops and manufactures a wide range of manipulators in order to enable motions ranging from course to highly precise to be performed in a vacuum. In addition to any number of standard manipulators, TRINOS can also offer custom versions in accordance with your wishes.

Elastomer sealed

A through shaft that is guided in a housing affords both rotational as well as translational motions. Special elastomer seals assure its suitability for high vacuum, while vacuum-suitable grease affords smooth, stick-slip-free motion.

This direct transmission enables more precise motions with higher maximum forces and moments to be produced in a vacuum than with magnetically guided systems. However its elastomer seals make it suitable for HV applications only.

Examples of product versions:

q Selection of the vacuum grease (Apiezon H, L, M, N, etc.)q Selection of the seal materialq Higher axial force, higher torqueq Non-catalog travel lengthsq With setscrew q Different size or series of connection flangeq Differential pump connectionq Anti-twist protection

Magnetically coupled

Magnetically guided rotary/linear feedthroughs are designed for UHV applications. The rotary motion is transmitted from the at-mosphere side to the vacuum with the aid of a magnetic coupling. This eliminates the need for a direct feedthrough, and the shaft is contained within a housing that is open only to the vacuum side.


q Higher axial force, higher torqueq Non-catalog travel lengthsq Other size or series of connection flangeq Anti-twist protectionq Motorization

Manipulators


Sealed diaphragm bellows

Translation

With a setting resolution of 0.005 mm, bellows manipulators num-ber among the most precise placement and manipulation instru-ments available. The flexible element that transmits the motion to the vacuum is the diaphragm bellows, which also guarantees UHV suitability.

Its accuracy is achieved by means of play-free recirculating ball bearing guides and drives, as well as by its massive housing.

An FEM (Finite Element Method) simulation is employed to deter-mine the best combination of stiffness of the structure, precision of the drive and total weight of the manipulator for TRINOS manipu-lators. This avoids deformation caused by the pressure differential between chamber and environment, while simultaneously affor-ding the accuracy and weight specifications you want.


q Z-axis manipulatorq Non-catalog travel lengths (from a few centimeters to several meters)q Motorizationq Additional flange connections q Diaphragm bellows-sealed manipulators in generalq Matching the ratios between precision to stiffness to weight Example: Highly precise with weight that can still be handled)q XYZ-axis manipulatorq Motorized drive, with or without control system

Rotation

UHV-suitable transmission of a rotary motion is accomplished by means of a diaphragm bellows that is welded directly to the flange and the tumbling principle. This is accomplished by transforming the atmosphere-side rotation into a swaying motion of the bel-lows, which is then re-transformed into a rotary motion again on the vacuum side. The ball bearing mounting of the shaft affords high speeds and a very high efficiency factor. This transmission principle is especially suitable for applications in which all magne-tism must be avoided.


q Various accuraciesq Various momentsq Drive selection (manual, motor, etc.)q Actuation of viewport shutters

Manipulators


Specifications for custom manipulators

Drive Mode: Manual

Manual

Manual

Manual

Z-Axis:

X-Axis:

Y-Axis:

Rotation:

Motor (e.g. stepping motor)




Pneumatic

Pneumatic

Pneumatic

Pneumatic

Working Range: Leakage Rate:UHV mbarHV

Number of Manipulation Cycles:

Suitable/Permissible Materials:

Other Requirements:

Travel Speed:Positioning Accuracy of Travel Direction:

Positioning Accuracy of Further Coordinates:

Positioning Resolutionof Travel Direction:

Dimensions and Weight of Component to be Manipulated

Operating Temperature: Bakeout Temperature:

Travel Axes:

Z

X

Y

Rotation

Distance

Distance

Distance

Angle

Connection Flanges

Connection flange DN:

Travel flange DN:

CF

CF

ISO-K

ISO-K

ISO-KF

ISO-KF

ISO-F

ISO-F

Installation Orientation: Horizontal Vertical Angle °

Manipulators


Precision X/Y-axis Manipulator, UHVq Pressure range: 1 x 10-10 to 1000 mbar (abs.)q Tightness: < 1 x 10-10 mbar x l/sq Operating temperature: 80 °Cq Bakeout temperature: 250 °Cq Number of cycles: 10,000 at full deflection

q Materials: Diaphragm bellows: Stainless steel 316L Flange socket: Stainless steel 304L Flanges: Stainless steel 316LN ESU Housing: Anodized aluminum A5083

Equipment and properties:

q No plastic components; completely bakeableq Zero backlashq Maximum x and y deflection fully usable simultaneouslyq Optimized engineering through FEM calculations for extremely high resistance to deformation and prevention of positioning deviations due to pressure changesq Identical flange size on both sidesq Clear inside-bellows diameter maximizes installation spaceq User-definable installation orientationq Easy to replace bellowsq Top connection flange with threaded holes, bottom connection flange with through holesq Reproducible setting accuracy: 0.01 mm

The large measuring and operating drums are easy to handle and enable precise adjustment with a resolution and reproducibility of 2 µm and a setting accuracy of 3 µm. A heating sleeve can be mounted on the bellows in the accessible installation area. (CAUTION: The bellows heater must be separately regulated with sensors to prevent overheating.)

Accessories:

q Custom attachmentsq Z-axis manipulatorsq Feedthroughsq Measurement crosses

Options:

Motorization:q Stepping motorq Servo motorq DC motorq Motor control systems

Other options:q Dimensions adaptable to customer specificationsq Higher number of cyclesq Low-profile versions (threaded coupling flange available)

Manipulators


DA

A

B

C

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Resolution [µm]

Accuracy [µm]

Item No. Price €

40 154 270 270 130 5 3 420MXY040-12 3800,00

63 204 334 334 137 2 3 420MXY063-12 4200,00

100 254 357 369 210 2 3 420MXY100-12 5900,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Resolution [µm]

Accuracy [µm]

Item No. Price €

63 204 371 371 184 2 3 420MXY063-25 5200,00

100 254 394 406 210 2 3 420MXY100-25 6200,00

X/Y Deflection: +/- 12.5 mm

X/Y Deflection: +/- 25 mm

Manipulators


Precision Z-axis Manipulatorq Pressure range: 1 x 10-10 to 1000 mbar (abs.)q Tightness: < 1 x 10-10 mbar x l/sq Operating temperature: 80 °Cq Bakeout temperature: 200 °Cq Number of cycles: 10,000 at full deflection

q Materials: bellow: stainless steel 316L tube: stainless steel 316LN ESR housing: stainless steel


We wanted to build a UHV manipulator that would withstand vacuum pressure without deformation, at the same time would be easy to convert to motorized drives. This is why we developed the TRINOS Z-axis manipulator, which satisfies all of these requirements and more.

q Motorized drive can be used immediately without refitting the spindle drive

q Zero-backlash spindle without stick-slip effect assures maximum positioning accuracy

q Very long spindle service life

q Innovative, zero-backlash guides

q Warp-resistant design means the manipulator will not buckle significantly, even under vacuum

q Spindle drive brake prevents independent movement

q Bakeable to 200 °C

q Entire structural element made of steel: Accuracy increased by prevention of varying expansion coefficients

q Resolution: 0.005 mm

q Manufactured entirely at TRINOS; all parameters can be adapted to user requirements

q FEM simulation of mechanical behavior possible

Accessories:

q Custom attachmentsq X/Y-axis manipulatorq Reducersq Crossesq Sealsq Couplings

Options:

Motorization:q Stepping motorq Servo motorq DC motorq Motor control systems

Other options:q Dimensions adaptable to customer specifications

Example of use: Lower assembled Z-Manipulator, motor-driven and angle adjustment.

Manipulators


A

B

E

D

C F

Flange Size [DN]

A[mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

40 50 327 84 175 50 78 420MZA040-050 3880,00

40 100 377 84 175 50 78 420MZA040-100 4100,00

40 150 427 84 175 50 78 420MZA040-150 4550,00

40 200 492 84 175 50 78 420MZA040-200 4900,00

40 250 557 84 175 50 78 420MZA040-250 5200,00

40 300 622 84 175 50 78 420MZA040-300 5700,00

40 400 752 84 175 50 78 420MZA040-400 6200,00

40 500 882 84 175 50 78 420MZA040-500 7000,00

40 600 1012 84 175 50 78 420MZA040-600 8000,00

40 750 1207 84 175 50 78 420MZA040-750 10000,00

63 50 327 128 217 60 80 420MZA063-050 5000,00

63 100 377 128 217 60 80 420MZA063-100 5330,00

63 150 427 128 217 60 80 420MZA063-150 5660,00

63 200 492 128 217 60 80 420MZA063-200 6000,00

63 250 557 128 217 60 80 420MZA063-250 6250,00

63 300 622 128 217 60 80 420MZA063-300 6500,00

63 400 752 128 217 60 80 420MZA063-400 7000,00

63 500 882 128 217 60 80 420MZA063-500 8000,00

63 600 1012 128 217 60 80 420MZA063-600 10000,00

63 750 1207 128 217 60 80 420MZA063-750 12500,00

100 50 367 176 267 90 104 420MZA100-050 6000,00

100 100 417 176 267 90 104 420MZA100-100 6330,00

100 150 467 176 267 90 104 420MZA100-150 6660,00

100 200 517 176 267 90 104 420MZA100-200 7000,00

100 250 567 176 267 90 104 420MZA100-250 7500,00

100 300 617 176 267 90 104 420MZA100-300 8000,00

100 400 739 176 267 90 104 420MZA100-400 11000,00

100 500 860 176 267 90 104 420MZA100-500 13000,00

100 600 982 176 267 90 104 420MZA100-600 15000,00

100 750 1166 176 267 90 104 420MZA100-750 17000,00

Manipulators


Z-axis Fine Manipulator

q Bakeout temperature: 200 °C q Setting range: +/- 5 mm q Number of cycles: 10,000 q Maximum axial load: 50 N q Maximum load moment on bellows: 0.2 Nm q Mounting screw: M4 x 5 q Protective cover optionally available

This manipulator is used for fine positioning of components in the vacuum. It is available in two versions: Fine and superfine.

Flange Size [DN]

Horizontal travel [mm]

Resolution [µm]

Accuracy [µm] Item No. Price €

16 +/- 5 5 3 420MZF016-010 980,00

Flange Size [DN]


Resolution [µm]

Accuracy [µm]

Item No. Price €

16 +/- 5 0,5 3 420MZF016-010-s 1490,00

Flange Size [DN]


Resolution [µm]

Accuracy [µm]

Item No. Price €

16 +/- 5 0,037 2 420MZF016-010-m 2450,00

Flange Size [DN]


Resolution [µm]

Accuracy [µm]

Item No. Price €

16 +/- 12,5 0,037 2 420MZF016-025-m 2850,00

Manual, Fine

Manual, Superfine

Motorized, 10 mm Adjustment Travel

Motorized, 25 mm Adjustment Travel

Ø13

134

Ø18

45-55 79-89

Ø34

115

M4

3

Ø7

Ø9

Ø13

182

127 bis 137

Ø34

Ø21

45 bis 55

115

M4

3

Ø7

Ø9

Ø13

45 bis 55

262-272 (10 mm Hub)

217

19Ø34

5

M4

3

Ø7

Ø9

Ø13

19

380,5-405,5 (10 mm Hub)

272108,5-133,5

Ø34

5

M4

3

Ø7

Ø9

Manipulators


Differentially Pumped Rotation Platformq Continuous 360° rotation q 2 differentially pumped subsections, Teflon®-sealedq Can easily be combined with manipulators q Other sizes upon request q Pressure range: 1 x 10-10 to 1000 mbar (abs.) q Bakeout temperature: 150 °C q Stepping or servo motor versions available A

B

C

E

D

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E = Angle [°]

Item No. Price €

40 115 76 81 41 60 420MDP040 4200,00

63 146 93 91 48 45 420MDP063 5200,00

100 197 116 110 54 45 420MDP100 5900,00

160 260 157 145 58 45 420MDP160 8800,00

Rotary Magnetic Feedthroughq Magnetic coupling q Vacuum side: Hybrid bearingq Bakeable to 230 °C without motor q Rotation: 0° to 360° q Maximum speed: 500 RPM

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Torque [mm]

Item No. Price €

16 50 82 6 0,15 420MRM016 730,00

40 75 150 10 8 420MRM040 1100,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

Torque [mm]

Item No. Price €

40 75 225,5 10 4 420MRM040-m 1850,00

ØC

B A

B A

ØC

Manual

Motorized

Manipulators


CF Shutter, Manual

CF Shutter, Pneumatic

q Suitable for UHV q Bakeable to 250 °Cq Bellows-sealed feedthrough

q Suitable for UHV q Bakeable to 250 °Cq Pneumatically operated; double actionq Bellows-sealed feedthroughq Pneumatic drive up to 60 °C

A

D

B

C

A

B

C

D

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

40 152 22 31 42 420MBL040 1290,00

63 171 37 53 42 420MBL063 1360,00

100 186 65 91 42 420MBL100 1490,00

160 212 111 124 42 420MBL160 1550,00

Flange size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Item No. Price €

40 201 22 31 55 420MBL040-p 1500,00

63 221 37 53 55 420MBL063-p 1650,00

100 236 65 91 55 420MBL100-p 1700,00

160 262 111 124 55 420MBL160-p 1950,00

Stainless Steel

Stainless Steel

Manipulators


CF Bellows-sealed Rotary Feedthroughq Suitable for UHV q Bakeable to 250 °Cq Bellows-sealed feedthroughq Connection shaft can be customized

A

C

B

D

AC

D

B

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

Thread Item No. Price €

16 160 41,5 60 6 M3 420MRB016 780,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]


16 210 37 60 6 M3 420MRB016-p 980,00

Manual

Pneumatic

Manipulators


Magnetically Guided Rotary/Linear Feedthroughq Pressure range: 1 x 10-10 to 1000 mbar (abs.)q Tightness: < 1 x 10-10 mbar x l/sq Bakeout temperature: 250 °Cq Maximum axial force: 50 N q Maximum torque: 2.3 Nmq Angle of rotation: 0° to 360°


The magnetically coupled rotary/linear feedthrough is designed for UHV applications. It can easily be attached to the system by means of a DN 40 CF flange. Samples can be moved with an axial force of 50 N and freely rotated with a torque of 2.3 Nm. Many of the specifications listed here can be modified to suit individual requirements.

q Force transmitted by magnetic drums

q Multiple ball bearings assure friction-free travel

q Vented M6 mounting holes at end of rod

q Mechanical limitation of vertical travel

Accessories:

q Custom attachmentsq Manipulatorsq Reducersq Crossesq Sealsq Couplings

Options:

q Any travel length, other flange sizes and other flange systems available on short noticeq Higher axial forceq Higher torqueq Dimensions adaptable to customer specificationsq Anti-twist lockq Other flange sizes available on short notice

Manipulators


Positioning Aids

D

E

A

BC

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

40 422 65,5 79 20 250 420MDM040-0250 2500,00

40 672 65,5 79 20 500 420MDM040-0500 2700,00

40 922 65,5 79 20 750 420MDM040-0750 2900,00

Anti-twist Lock for Magnetically Guided Rotary/Linear Feedthrough

Port Aligner with Diaphragm Bellows for Angular Adjustment

q Suitable for UHV q Bakeable to 250 °Cq Eliminates the degree of freedomq Can be installed subsequently to system installation and removed again as desired

q Adjustment angle: 3° q Axial travel: +/- 5 mmq Bellows material: Stainless steel 316Lq Flange material: 316LN ESUq Operating temperature: 80 °Cq Bakeable to 250 °C

B

A

AØ B

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

40 381 103 420MDM040-0250-VS 180,00

40 631 103 420MDM040-0500-VS 185,00

40 881 103 420MDM040-0750-VS 190,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

40 105 - 115 115 420MPA040 555,00

63 135 - 145 159 420MPA063 680,00

100 145 - 155 206 420MPA100 915,00

Manipulators


Elastomer-sealed Rotary/Linear Feedthrough q Pressure range: 1 x 10-8 to 1000 mbar (abs.)q Tightness: Static: < 1 x 10-8 mbar x l/s; dynamic: < 1 x 10-4 mbar x l/sq Maximum axial force: 100 N q Maximum torque: 20 Nmq Bakeout temperature: 110 °C with Apiezon Hq Maximum operating temperature: 50 °C


Elastomer-sealed systems are excellently suited for the HV range. Suitability for various temperature ranges can be achieved through selection of the appropriate vacuum grease (see Accessories for full details): Apiezon Type M is suitable for general vacuum applications at room temperature. Type L possesses espe-cially low vapor pressure. Type N is employed in the cryogenic field. Type H may be used for temperatures of up to 240 °C, taking the rise in vapor pressure into consideration. The elastomer-sealed rotary/linear feedthrough offers numerous optional extras that further increase its wide range of potential applications.

q Force directly transmitted by means of elastomer-sealed, greased rod

q Rod of hardened stainless steel; diameter: 12 mm

q Freely rotatable and axially shiftable

q Adjustable interior and exterior stop

q Vented M6 installation holes at end of rod

Accessories:

q Custom attachmentsq Manipulatorsq Reducersq Crossesq Sealsq Couplings

Options:

q Special travel lengths on short noticeq With positioning setscrewq Anti-twist lockq Choice of vacuum grease (Apiezon H, L, M, N, etc.)q Choice of connection flange by adapting reducersq Differential pump connectionq Linear and rotary angle scaleq Higher axial force and torque q Choice of stopper material (aluminum, stainless steel, etc.)

Abbildung inkl. Positionierhilfen

Manipulators


A

B

E C

D

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

Item No. Price €

40 404 60 27 12 250 120MDD040-0250 820,00

40 654 60 27 12 500 120MDD040-0500 850,00

40 904 60 27 12 750 120MDD040-0750 875,00

Anti-twist Lock for Elastomer-sealed Rotary/Linear Feedthrough

Clamping Device

q Eliminates the degree of freedom q Can be installed subsequently to system installation and removed again as desired

q To fix the guide rod in any position q Can be installed subsequently to system installation and removed again as desired

B

A

AB

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

40 386 81 120MDD040-0250-VS 280,00

40 636 81 120MDD040-0500-VS 285,00

40 886 81 120MDD040-0750-VS 295,00

Flange Size [DN]

A [mm]

B [mm]

Item No. Price €

40 16 55 120MDD-B 202,50

Positioning Aids

Manipulators


Pneumatic Cylinder

Elastomer-sealed Rotary Feedthrough

q Particle release: 0.1 particle per cycle q Leakage rate: 1.3 x 10-9 mbar x m³/sec q Bakeable to 150 °C q Ambient pressure: 1000 mbar to 10-6 mbar q Two-way cylinder q Force: 15 mm cylinder: 53 N; 32 mm cylinder: 266 N

q Bakeable to 110 °C q Operating temperature: 80 °C q Tightness: Static: 10-9 mbar l/s; dynamic: 10-9 mbar l/s to 10-7 mbar l/sq Oscillation load: Radial 400 N, axial 80 N q Transferrable torque: 25 Nm q Standard grease: Apiezon H; others upon request

For vacuum applications

C

A

B

C

ØA

ØAB

F F

ØD

ØE

Plunger Ø [mm]

Vertical travel [mm]

A [mm]

B [mm]

C [mm]

Item No. Price €

15 100 232 69 45 900M-CYV15-100 3550,00

15 150 282 69 45 900M-CYV15-150 3700,00

15 200 332 69 45 900M-CYV15-200 3850,00

15 250 382 69 45 900M-CYV15-250 4000,00

15 300 432 69 45 900M-CYV15-300 4150,00

15 350 482 69 45 900M-CYV15-350 4300,00

15 400 532 69 45 900M-CYV15-400 4450,00

15 450 582 69 45 900M-CYV15-450 4600,00

15 500 632 69 45 900M-CYV15-500 4750,00

15 600 782 69 45 900M-CYV15-600 5050,00

15 700 832 69 45 900M-CYV15-700 5350,00

32 100 265 115 75 900M-CYV32-100 5200,00

32 150 315 115 75 900M-CYV32-150 5400,00

32 200 365 115 75 900M-CYV32-200 5600,00

32 250 415 115 75 900M-CYV32-250 5750,00

32 300 465 115 75 900M-CYV32-300 5950,00

32 350 515 115 75 900M-CYV32-350 6150,00

32 400 565 115 75 900M-CYV32-400 6300,00

32 450 615 115 75 900M-CYV32-450 6500,00

32 500 665 115 75 900M-CYV32-500 6700,00

32 600 765 115 75 900M-CYV32-600 7050,00

32 700 865 115 75 900M-CYV32-700 7450,00

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

Item No. Price €

40 12 86 31,1 38 45 32 120MRD040 390,00

Measuring Instruments


382 Catalog 2010Bestell-Hotline: 0551/99963-0Tel: +49(0)551/99963-0 · www.trinos.com

Contents


Manometer, Suitable for UHV ....................................383

Compact Vacuum Meter ............................................384

Full-range Vacuum Pressure Transducer ......................385

Accessories for Full-range Vacuum Pressure Transducer ....................................................386

Vacuum Switch ..........................................................387

Photoelectric Sensor for In-vacuum Use .....................388


Catalog 2010 383Bestell-Hotline: 0551/99963-0Tel: +49(0)551/99963-0 · www.trinos.com

Stainless Steel

Manometer, Suitable for UHV

q Mechanical bourdon gaugeq For coarse vacuum display, suitable for UHV and bakeout q Linear scale: -1 to 0.6 bar; scale resolution: approx. 50 mbarq Leakage rate: < 10-9 mbar x l/s q Temperature range: -40 to +120 °C at the dynamometer, depending on connectionq Components in contact with vacuum: Stainless steel 316 and 316Lq Corrosion-resistantq Accuracy class: 1.6q Two instrument dials to choose from: International (EU) scale: -1 to 1.6 bar; US scale: -30 inHg to +8 psiq Choice of connection flanges available, including weld-on flangesq Options: Other connectors, e.g. VCR, Swagelok, or customer-specific

These mechanical gauges are particularly useful for venting a vacuum chamber. The pressure level is displayed even in the event of a power outage, and indicates when the chamber can be opened. The commonly used Pirani gauge does not provide reliable measurements in the 1 bar pressure range. When equipped with a CF flange, this manometer is suitable for use in UHV and bake-out. The measuring range of the Trinos manometer is expanded to cover the overpressure range, so that overfill can be indicated when venting a chamber from a nitrogen cylinder. When connected to a leak-tight UHV system, overpressure cannot escape and thus must be avoided, because CF fasteners and in particular CF viewports are not designed to withstand overpressure. An overpressu-re level above 0.5 bar in a vacuum chamber should be avoided at all costs, as the chamber would otherwise have to be handled as a pressure vessel.

Flange Size [DN]

A [mm]

B [mm]

P min [bar]

P max [bar]

Scale Item No. Price €

DN16KF 62,8 32,5 -1 +0,6 International 120C-MAN016-Int 140,00

DN16KF 62,8 32,5 -1 +0,6 US-scale 120C-MAN016-US 140,00

DN16CF 62,8 31,2 -1 +0,6 International 420C-MAN016-Int 150,00

DN16CF 62,8 31,2 -1 +0,6 US-scale 420C-MAN016-US 150,00

G1/4B 62,8 13 -1 +0,6 International 920C-MAN000-Int-G 105,00

Tube 1/4“ (6,35x0,925mm) 62,8 30 -1 +0,6 International 920C-MAN000-Int-Rohr 110,00

VCR1/4 female 62,8 57,9 -1 +0,6 International 920C-MAN000-Int-VCR 180,00

1/4 NPT 62,8 0,51 -1 +0,6 US-scale 920C-MAN000-US-NPT 105,00

Tube 1/4“ (6,35x0,925mm) 62,8 30 -1 +0,6 US-scale 920C-MAN000-US-Rohr 110,00

VCR 1/4 female 62,8 57,9 -1 +0,6 US-scale 920C-MAN000-US-VCR 160,00

ØA

B

Schlüssel�äche14 mm



Compact Vacuum Meter

q Portable pressure gauge with digital display q For low or medium vacuum range, 1600 to 5 x 10-4 mbar q Up to 5000 h battery operation; AC adapter; automatic power-off q Batteries and AC adapter available separately q Install on KF 16 flange or use as remote sensor gauge head separate from display q One-key operationq Datalogger function for up to 2000 values q USB port for transferring data to a computer q Windows® software available for transferring data to a PCq Optional: Factory adjustment; DKD* calibration; test certificate

These pressure gauges for the fore-vacuum range are easy to install and have a large digital display. Choose from piezo and Pirani sensors. With practical experience our technicians have developed a preference for model VD85 with a combination of piezo and Pirani sensors, because it is excellent for monitoring the process of venting to atmosphere. All models in this series now come equipped with a USB port and a measured value memory for up to 2000 measurement points. The optional Windows® software lets you record values as they are measured and configure the device. Alternatively, data can be stored in the VD8 for a period from 30 minutes to several weeks and read out at a later point.

Flange Size [DN]

P max [mbar]

P min [mbar]

Sensor Special FeatureItem No. Price €

16 KF 1600 1 Piezo Resistive Independent of Gas 120C-VD81-016 400,00

16 KF 100 5x10-4 Pirani Integrated Sensor 120C-VD83-016 455,00

16 KF 100 1x10-3 Pirani Exchangeable Sensor 120C-VD84-016 455,00

16 KF 1200 5x10-4 Piezo + Pirani Two Sensors 120C-VD85-016 580,00

Item Item No. Price €

USB-Cable, 2m 900C-V-WUSB0002 7,50

Alkaline Batterie 9V 900C-VD8ALK 4,50

Protective Case 900C-VD8CASE 22,00

Power Supply 15V 900C-VD8N2 22,00

Software VGR 900C-VGR 165,00

Accessories for VD8x



Full-range Vacuum Pressure Transducer

q Microcontrolled vacuum pressure transducer q Gas-type correction factors for every measurement technique ensure accuracy q Low thermal and electronic effects on the vacuum process q Compact, entirely metal-sealed measuring cells q Replaceable sensor headsq Insensitive to ingress of air q VSP: Pulsed Pirani (heat conductivity) sensor with extended measuring range; output: Analog 0 - 10Vq VSM: Full-range sensor, Pirani + cold cathode (inverted magnetron); rugged, with strong magnet and good ignition behavior; outputs: Analog 0-10V and RS-485q VSH: Full-range sensor, Pirani + hot cathode (Bayard Alpert); broad measuring range and high accuracy; double-filament with automatic switching; degassing function; outputs: Analog 9-10V and RS-485q VD9: 1-channel display with 2 relays; computer interface: RS-232q VD10: 4-channel display with 8 relays; computer interface: USBq Item no. suffix „-set“: Includes sensor, 2 m measurement cable and VD9 display q See „Accessories“ for displays, Windows software and cables

These microcontrolled transducers are available as pure Pirani gauge heads or as full-range tubes with one Pirani and one cold cathode sensor. The patented Pirani sensor pulses in the expected measurement range and switches to the cold cathode sensor only when the pressure is very low. This saves wear on the sensor system and ensures a long service life. The sensor system and electronics are specifically designed for high performance with minimal energy consumption. The output signal is analog 0-10 V (logarithmic). The full-range sensors are additionally equipped with an RS-485 serial interface for communication with a computer. With the electronics module removed, the sensor can withstand bakeout temperatures of 150 to 170 °C. The model VD9 and VD10 intelligent displays (available separately) have 2 to 8 switching relays in addition to the display, which can be used to switch pumps and valves. This enables vacuum regulation without a complicated PLC system. The display has an RS-232 or USB port. The VacuGraph software (available separately) is a Windows® program with a Labview-based interface. It is made for recording and storing vacuum data in a PC. Data communication is over the RS-232 or USB port on a VD9 or VD10 display. Models VSH and VSM are available with an adapter for direct communication over the RS-485 interface without a display.

Flange Size [DN]

A [mm]

B mm

C mm

P max [mbar]

P min [mbar]

SensorItem No. Price €

16 KF 32 45 65 1000 1x10-4 Pirani 120C-VSP016-set 995,00

16 KF 32 45 65 1000 1x10-4 Pirani 120C-VSP016 305,00

25 KF 70 92 134,5 1000 5x10-9 Pirani+Cold Cathode 120C-VSM025-set 1700,00

25 KF 70 92 134,5 1000 5x10-9 Pirani+Cold Cathode 120C-VSM025 975,00

40 KF 70 95 140,5 1000 1x10-9 Pirani + Hot Cathode 120C-VSH040-set 1880,00

40 KF 70 95 140,5 1000 1x10-9 Pirani + Hot Cathode 120C-VSH040 1100,00

16 CF 32 45 76,5 1000 1x10-4 Pirani 420C-VSP016-set 1100,00

16 CF 32 45 76,5 1000 1x10-4 Pirani 420C-VSP016 462,00

40 CF 70 92 164 1000 5x10-9 Pirani+Cold Cathode 420C-VSM040-set 1790,00

40 CF 70 92 164 1000 5x10-9 Pirani+Cold Cathode 420C-VSM040 1100,00

40 CF 70 95 145,5 1000 1x10-9 Pirani + Hot Cathode 420C-VSH040-set 2050,00

40 CF 70 95 145,5 1000 1x10-9 Pirani + Hot Cathode 420C-VSH040 1250,00

A

B

C



Sensor Connection and Relays Computer Interface Item No. Price €

1 Channel, 2 Relays RS232 900C-VD9 810,00

4 Channels, 8 Relays USB 900C-VD10 1550,00

Display to PC Cabel Length Item No. Price €

Software - 900C-VGR_ 165,00

from VD9 to PC 2m, Serial RS232 900C-V-W0800 27,00

Sensor to Display Cabel Length[m]

Item No. Price €

VSP to VD9 / VD10 2m 900C-V-W0606_2 29,00

VSP to VD9 / VD10 6m 900C-V-W0606_6 69,00

VSM / VSH to VD9 2m 900C-V-W1506_2 39,00

VSM / VSH to VD9 6m 900C-V-W1506_6 72,00

VSM / VSH to VD10 2m 900C-V-W1515_2 52,00

VSM / VSH to VD10 6m 900C-V-W1515_6 85,00

For item No. Starting Serial Number Item No. Price €

120C-VSH040 for S/No. >9580200 120C-VSH040-B 385,00

120C-VSM025 for S/No. >9570200 120C-VSM025-B 210,00

420C-VSH040 for S/No. >9580200 420C-VSH040-B 450,00

420C-VSM040 for S/No. >9570200 420C-VSM040-B 260,00

Accessories for Full-range Vacuum Pressure TransducerDisplay and Control Units

Replacement Sensor Heads

Measurement Cable

VacuGraph Software (Windows®)

q Pressure display for xxxC-Vxxx full-range sensorsq Parameters for gas type, unit, switching point, etc.q Multiple relays for direct switching of pumps, valves, etc.q 1 to 4 sensor channelsq Additional interface for data exchange with a computerq 95-265 VAC, 50/60 Hz

q For remote control of displays and sensors using a PCq On-line data logging and graphic display

q for Sensors VSH and VSM from 2009 upwards



Vacuum Switch q Rugged electronic pressure switch with sturdy metal housing q Floating relay switch-point (change-over relay 230 VAC, 5 A) q Switch point can be precisely defined using a potentiometer; hysterese is fixed q Additional output of pressure measurement signal over a write output, 0-12 V q For providing a signal or direct switching of pump or valve q Response time: 200 msq Inner seal, VRP: metal; VRC: FPM; optional: FFPM q Combi-flange: Both DN 16 KF and G1/4 inner threadq Temperature range: 0 to 40 °Cq Data sheet: see www.trinos.com

Flange Size [DN]

P max [mbar]

P min [mbar]

Sensor Special FeatureItem No. Price €

16 KF 1200 5 Piezo Resistive Chemical Resistent 120C-VRC 350,00

16 KF 20 0,001 Pirani Internal Metal Seal 120C-VRP 310,00



Photoelectric Sensor for In-vacuum Use

q There are two sensors to choose from: 1) Red one-way photoelectric barrier with transmitter and receiver; object detection capability: < 0.1 mm at distances of up to 500 mm 2) Infrared reflecting sensor with transmitter and receiver in one structural component; object detection capability: < 0.2 mm at distances of up to 10 mm q Compact form q Very high resolutionq Ranges from 0.2 to 500 m q Sensor materials: Aluminum, stainless steel, vacuum-resistant epoxy resinq Teflon®-coated vacuum cable permanently attached to sensor, 1.5 m cable, open ends q Options: Other cable lengths; extended sensor rangeq Cable: 900C-LSK with plug to amplifier, other head openq Set: Sensor and vacuum cable, amplifier and cable on atmosphere side, without electrical vacuum feedthroughq Options: other cable lengths, extended sensor rangeq Data sheet: see www.trinos.com

These photoelectric barriers can be used for applications such as determining position, for counting objects, or as endpoint switches, to name a few examples. These vacuum-resistant sensors come with open cable ends. The signal is conducted through the chamber wall by an electrical feedthrough (e.g. multipin), and an amplifier converts it into a logic signal on the atmosphere side. One amplifier per sensor is required. Sets include sensor, vacuum cable, atmosphere cable and amplifier; feedthroughs must be ordered separately.

Type Wavelength Temperature Item No. Price €

Reflection Sensor-set 880nm -10°C...+55°C 900C-LSR-set 265,00

Beam Sensor-set 645nm -10°C...+55°C 900C-LS-set 245,00

Reflection Sensor 880nm -10°C...+55°C 900C-LSR 180,00

Beam Sensor 645nm -10°C...+55°C 900C-LS 155,00

Amplifier, Atmosph. - -10°C...+55°C 900C-LSV 90,00

Cable 2m, Atmosphere - - 900C-LSK 24,00

Accessories

Accessories


Contents

Accessories

Vacuum Grease .........................................................391

Thread Lubricant ........................................................391

Vacuum-Oil for Rotary Vane and Diffusion Pumps ..................................................392

Accessories


Vacuum Grease Vacuum grease is used to seal polished glass connections, to lubricate moving parts (such as stop valves or ball bearings) and to improve the sealing properties of elastomer O-rings.

Lubricants in general should be used only sparingly, because some degree of degassing is inevitable. One criterion for choosing a vacuum grease is the vapor pressure at working temperature (see data sheets at www.trinos.com for details). Most manufacturers prefer not to specify a final pressure in mbar, as this value is dependent on the pumping power of the system. The vapor pressure should not be higher than the targeted final pressure. It is also important to consider carefully whether traces of hydrocarbons or silicone could negatively affect the application.

Our high vacuum grease, YFS-50 from Dow Corning®, is a transparent, silicone-based grease. It is stable over a broad temperature range, has good lubricating and sealing properties and is non-gumming. Silicone consists of a chain of Si and O atoms surrounded by organic subgroups, primarily CH3 methyl groups. Silicone has a very low surface energy and a tendency to creep. Just a few molecules on a surface, for example, can cause paint to lose adhesion. Silicone is not generally used in coating plants because it is extremely difficult to completely remove all traces, even with solvents.

Please note the increase in vapor pressure at higher temperatures: 60 °C: 1.3 x 10-7 mbar; 110 °C: 2 x 10-5 mbar; 150 °C: 1 x 10-3 mbar.

The UHV and HV greases from Apiezon® are based on mineral greases and are silicone-free. Due to their high molecular weight, the hydrocarbons have an even lower vapor pressure and better lubricating properties than silicone grease. Moreover they exhibit no creep.

The Apiezon® greases we offer are optimized for various areas of application:q Type M is suitable for general vacuum use at room temperature q Type L has a particularly low vapor pressureq Type N is used in cryogenic applications q Type H is intended for use at temperatures above 30 °C. It can be employed in temperatures up to 240 °C, bearing in mind that the vapor pressure increases with increasing temperatures: 60 °C: 1.3 x 10-7 mbar; 110 °C: 8 x 10-6 mbar; 240 °C: 8 x 10-3 mbar

Quantity Temperature Range Vapor Pressure at 20 °C Item No. Price €

50g -40 ... 150°C 4,8 x 10-7mbar YFS-50 20,00

Quantity Temperature Range Vapor Pressure at 20 °C Item No. Price €

25g -10 ... 240°C 2,3 x 10-9 mbar YFS-H 130,00

50g 10 ... 30°C 1,1 x 10-10 mbar YFS-L 110,00

100g 10 ... 30°C 2,7 x 10-9 mbar YFS-M 91,00

25g -269 ...30°C 9,3 x 10-10 mbar YFS-N 124,00

Silicone Grease

Mineral Grease

Thread Lubricantq Prevents seizing of threads at high temperatures or high torqueq Permits easy disassembly even after prolonged high temperature useq Friction coefficient comparable to that of oiled screwsq Temparature range: -30°C to 650 °Cq Contains solid lubricant, mineral oil, thickener and powdered metalq Recommended for uncoated stainless steel screws in heated flangesNot for use in vacuum

Product Tube Size [g]

Temperature Range [°C]

Item No. Price €

MOLYKOTE® 1000 100g < 650°C YFG-100 19,00

Accessories


Vacuum-Oil for Rotary Vane and Diffusion PumpsFundamental properties of YOV Rotary Vane Pump Oils are viscosity at working temperature, vapor pressure and chemical stability. These universal oils are made of highly distilled mineral oils and are suitable for air, inert gases and chemically non-aggressive to mildly aggressive vapors, but not for pure oxygen. The far more costly perfluorinated polyether (PFPE) oil is suitable for highly aggressive vapors including pure oxygen.YOD Diffusion Pump Oil is ideal for all types of diffusion pumps. It features high pump speeds and low final pressure ranges (with N2 cold trap: to 2 x 10-9 mbar).

q YOV-1: Comparable to 100 (Alcatel), N62 (Leybold), GS77 (Leybold), XVR-100q YOV-2: Comparable to P3 (Pfeiffer),L (Pfeiffer) , NC2 (Leybold), 200 (Alcatel), Ultragrade 20 (Edwards)q YOV-3: Comparable to F5 (Pfeiffer), NC1/25 (Leybold), 113 (Alcatel), YLVAC 25/6 (Edwards), Krytox 1525q YOD: Comparable to 61 (Pfeiffer), Diffelen light/normal (Leybold), 200 (Alcatel), Apiezon B (Edwards), D6, D8, Aneron light, Addinol XVD6, Solva 68

Quantity Oil Base Viscosity [mm²/s]

Vapor Pressure [mbar]

Item No. Price €

1 Liter M 60 (40°C) 4 x 10-8 (40°C) YOD 95,00

Quantity Oil Base Viscosity [mm²/s]

Vapor Pressure [mbar]

Item No. Price €

1 Liter M 100 (40°C) 3 x 10-6 (20°C) YOV-1 19,00

1 Liter M 95 (40°C) 2 x 10-7 (40°C) YOV-2 19,00

1 Liter F 95 (40°C) 4 x 10-10 (40°C) YOV-3 560,00

Diffusion Pump Oil

Rotary Vane Pump Oil

Screws and Bolts

Screws and Bolts


Contents

Screws and Bolts

Hexagon Socket Head Screws ....................................398

Hexagon Head Bolts ...................................................399

Nuts ...........................................................................401

Washers .....................................................................402

Stud Screws ................................................................403

ISO-F Screw Sets.........................................................403

CF Hexagon Head Screw Set for Flanges with Through-holes ....................................................404

CF Hexagon Head Screw Set for Flanges with Tapped Holes ......................................................404

CF Hexagon Head Screw Set for Spacer Flanges.........405

CF Plate Nut Sets ........................................................405

CF Stud Screw Set with Hexagon Nut .........................406

CF Hexagon Head Screw Set with Horseshoe Nuts ...... 406

COF Screw Set ............................................................407

Screws and Bolts


Screws and Bolts

Mechanical properties

Two key mechanical parameters must be taken into consideration in assembling screws and bolts:

q Tensile strength Rm: This parameter indicates the minimum tensile stress at which the screw or bolt may fail.

q Yield strength Re or 0.2% proof stress Rp 0.2: Yield strength indicates the minimum stress at which the tensile strength will remain the same or decline the first time, in spite of increasing elongation of the screw or bolt. It represents the transition between the elastic and plastic zones. If there is a continuous transition from the elastic to the plastic zone, e.g. in the case of stainless steel screws and bolts or steel screws and bolts having a high property class, it will be very difficult to determine yield strength. What is employed in this case is the 0.2% proof stress Rp 0.2, i.e. the stress that results in a permanent elongation of 0.2%.

Screws and bolts should not be subjected to stresses that ex-ceed their yield strength Re or their 0.2% proof stress Rp 0.2.

Consequently, the guidelines for screw and bolt torques are values that take into consideration 90% utilization of the 0.2% proof stress.

The tensile strength, yield strength and proof stress of steel screws and bolts at room temperature are reflected in the designations of the property classes, i.e. a two-digit numerical combination. The first numeral is 1/100 [N/mm2] of the tensile strength. Multiply-ing the two numbers produces 1/10 [N/mm2] of yield strength and proof stress:

Example: Property Class 6.8:Tensile Strength Rm = 6 · 100 N/mm2 = 600 N/mm2

0.2% Proof Stress Rp 0.2 = 6 · 8 · 10 N/mm2 = 480 N/mm2

The designations for stainless steel screws and bolts indicate the quality of their materials and their tensile strength. They are A (for austenitic), 1 to 5 (for the type of alloy), as well as their proper-ty class -50 (soft), -70 (strain hardened) or -80 (high strength). The property class represents 1/10 N/mm2 of tensile strength.

Example: Designation A2-70: A2: Austenitic, Alloy Type 270: Tensile Strength Rm = 70 · 10 N/mm2 = 700 N/mm2

The nuts that are employed should have at least the same strength as the bolts. A designation between 4 and 12 is used to indicate the pro-perty class in the case of steel nuts. The designation represents 1/100 [N/mm2] of the test stress; e.g. Designation 6 => Tensile strength = 600 N/mm2. In other words, the designation for the nut should be equal to or greater than the first numeral in the bolt’s property class. A nut having the same or higher material quality and property class should be employed for stainless steel bolts. Caution: Nuts whose height is less than 0.8 · d (flat design) have only limited strength.

Coefficients of friction for stainless-steel and steel screws and bolts

A knowledge of the coefficient of friction µtot of the screw connec-tion is necessary in order to determine torque and tension. Howe-ver due to the high number of surface and lubricant conditions, it is virtually impossible to indicate secure values. The spread is very great, in addition to the ranges of the various tightening methods. Consequently, it is only possible to indicate ranges for the coeffici-ents of friction. It is advisable to determine the correct torque by conducting a test under application conditions.

Although the use of lubricants can reduce the coefficients of friction, the large spread will remain. The smaller coefficients of friction must be taken in to consideration when tightening the screws or bolts.

The rule is: Use of lubricants => Coefficient of friction µtot declines => Less torque is necessary/permissible.

The coefficients of friction in the thread and on the bearing surfaces will be significantly greater in the case of stainless steel screws or bolts than in the case of quenched and tempered steel screws and bolts. The range of coefficients of friction, too, is much larger (up to over 100%). Due to their high shank pressure, they additionally tend to seize. A lubricant will typically help here. Alternatively, silver-plated bolts or silver-plated nuts can be employed.

Screw/Bolt Design

0.2% Proof Stress Rp 0.2

[N/mm2]

Tensile Strength Rm

[N/mm2]Materials

Stainless Steel, A2-70

450 700Stainless steel, 1.4301 (304), 1.4303 (305), 1.4307 (304L)


600 800 Stainless steel, 1.4401 (316)

Steel, Property Class 8.8

640 800Carbon steel, quenched

and tempered

Bolt Material Nut Materialµtot Without Lubrication

µtot with MoS2 Paste

Oiled

A2 or A4 A2 or A4 0,23 – 0,50 0,10 – 0,20 -

Galvanized steel

Galvanized steel

0,12 – 0,20 - 0,10 – 0,18

Table 1: Proof stresses, tensile strengths and materials for stainless-steel and steel screws and bolts

Table 2: Coefficients of friction for stainless-steel and galvanized steel bolts.All information is provided for guidance only and is not binding. (The coefficients of friction µtot assume identical coefficients of friction in the thread, beneath the head and beneath the nut.)

Screws and Bolts


Properties of screws and bolts at elevated temperatures

When using screws or bolts at elevated temperatures, the fact must be taken into consideration that their tensile strength and proof stress will be lower. Moreover, the time yield limit and/or high-tem-perature stability must be taken into consideration as a parameter for mechanical stress.

Die in der Tabelle 3 aufgeführten Angaben zur Dehngrenze dienen daher lediglich als Anhaltswerte für die mechanischen Eigenschaf-ten von Schrauben bei höheren Temperaturen. The information provided in Table 3 relating to the proof stress can therefore serve only as guidance for the mechanical properties of screws and bolts at elevated temperatures.

Torques and tensions

Tensions

If two plates are connected by means of a through bolt connection, tightening will produce a tensile force in the bolt and a compressive force of the same magnitude between the plates. This lengthens the bolt and compresses the components. The extension (elonga-tion) of the bolt is what generates tension. The clamping force of the components is produced by the compression of the workpieces and, in the absence of any further forces on the connection, will be identical to the tension.

Torque

When the bolt is tightened, friction is produced between the con-tacting surfaces. As tension increases, the moments of friction in the thread and in the nut seat will rise. At maximum tension, the total of the friction moments will represent the majority of the to-tal torque. In the case of lubricated bolts (smaller coefficients of friction), the friction component will be lower, enabling the bolts to produce a higher tension with the same torque. Caution: The maximum permissible torque will be lower for lubricated bolts than for unlubricated bolts.

Tension and torque produce tensile and torsional stresses in the bolt. Both of these influences must be simultaneously taken into consideration in calculating the bolt load. Tables like those in VDI Guideline 2230 offer an alternative to calculation. If 90% utiliza-tion of the bolt’s yield strength or proof stress is viewed as being

Bolt/Screw Design

0,2% Proof Stress Rp 0,2 [N/mm2] at

20°C 100°C 200°C 300°C 400°C


450 380 360 335 315


600 510 480 450 420

Steel, Property Class 8.8

640 590 540 480 -

Table 3: 0.2% proof stress for stainless-steel and steel screws and bolts having diame-ters of M24 or less. All information is provided for guidance only and is not binding.

Tables 4 and 5: Maximum torques and the maximum resulting tensions for hex head bolts (ISO 4014 and 4017), hex socket head bolts (ISO 4762) and nuts (ISO 4032) with standard threads and 90% utilization of the 0.2% proof stress Rp 0.2 for various coefficients of friction µtot. All information is provided as non-binding guidance at room temperature – see VDI 2230.

permissible, the maximum permissible torques and the correspon-ding tensions for given coefficients of friction can be taken from these tables.

However the information indicated as guidance is not bin-ding. In the case of critical or safety related applications, it will be necessary for further mechanical parameters and all influencing factors to be taken into consideration.

Excerpts fro the tables are indicated below for stainless-steel and steel bolts.

Stainless Steel Bolts, Quality A2-70 and A4-80

Dimensions and Quality

Maximum torque [Nm] for µtot =

0,10 0,14 0,20 0,30 0,40

M4 A2-70 A4-80

1,72,3

2,22,9

2,63,5

3,04,1

3,34,4

M5 A2-70 A4-80

3,44,6

4,25,6

5,16,9

6,18,0

6,68,8

M6 A2-70 A4-80

5,98,0

7,49,9

8,811,8

10,413,9

11,315,0

M8 A2-70 A4-80

14,519,3

17,823,8

21,528,7

25,533,9

27,636,8

M10 A2-70 A4-80

30,039,4

36,047,8

44,058,0

51,069,0

56,075,0

M12 A2-70 A4-80

5067

6282

74100

88117

96128

M16 A2-70 A4-80

121161

150198

183245

218291

237316

Stainless Steel Bolts, Quality A2-70 and A4-80

Dimensions and Quality

Maximum tension [kN] for µtot =

0,10 0,14 0,20 0,30 0,40

M4 A2-70 A4-80

2,973,96

2,733,64

2,403,20

1,942,59

1,602,13

M5 A2-70 A4-80

4,856,47

4,475,96

3,935,24

3,194,25

2,623,50

M6 A2-70 A4-80

6,859,13

6,318,41

5,547,39

4,495,98

3,704,93

M8 A2-70 A4-80

12,616,7

11,615,4

10,213,6

8,2511,0

6,809,10

M10 A2-70 A4-80

20,026,5

18,424,8

16,221,7

13,117,5

10,8014,4

M12 A2-70 A4-80

29,138,8

26,935,9

23,731,5

19,225,6

15,821,1

M16 A2-70 A4-80

55,073,3

50,967,9

44,959,8

36,448,6

30,040,0

Screws and Bolts


Employment in vacuum

If bolts are screwed into blind holes, an enclosed cavity will be produced at the base of the tapped hole. These kinds of dead vo-lumes empty only very slowly under vacuum and produce a long-lasting gas discharge that manifests itself in the same manner as a leak. It is therefore also termed a virtual leak. In high vacuum and UHV conditions, in particular, these kinds of dead volumes should be avoided through engineering design or should be vented if not otherwise possible.

Vacuum bolts afford a comfortable way of venting. The core of the bolt is drilled (degassing hole). Moreover, the bolt head seat con-tains a radial slot (degassing slot) that allows the area of the screw connection through hole to be vented (Figure 1).

The mechanical parameters for screws and bolts are not applicable to vacuum bolts, as the vent hole will mechanically weaken the bolt.

1

Tables 6 and 7: Maximum torques and the maximum resulting tensions for hex head bolts (ISO 4014 and 4017), hex socket head bolts (ISO 4762) and nuts (ISO 4032) with standard threads and 90% utilization of the yield strength Re or 0.2% proof stress Rp 0.2 for various coefficients of friction µtot. All information is provi-ded as non-binding guidance at room temperature – see VDI 2230.

Steel Bolts, Property Class 8.8

Dimensions and Property Class

Maximum torque [Nm]

µtot = 0,10 µtot = 0,12 µtot = 0,14

M4 8.8 2,6 3,0 3,3

M5 8.8 5,2 5,9 6,5

M6 8.8 9,0 10,1 11,3

M8 8.8 21,6 24,6 27,3

M10 8.8 43 48 54

M12 8.8 73 84 93

M16 8.8 180 206 230

Steel Bolts, Property Class 8.8

Dimensions and Property Class

Maximum tension [kN]

µtot = 0,10 µtot = 0,12 µtot = 0,14

M4 8.8 4,5 4,4 4,3

M5 8.8 7,4 7,2 7,0

M6 8.8 10,4 10,2 9,9

M8 8.8 19,1 18,8 18,1

M10 8.8 30,3 29,6 28,8

M12 8.8 44,1 43,0 41,9

M16 8.8 82,9 80,9 78,8

Degassing hole

Degassing slot

Dead volume

Screws and Bolts


Stainless Steel A2-70; 10 Pcs per Package

Hexagon Socket Head Screws

A [mm]

B = Thread Artikel Nr. Preis €

10 M4 920BSC-4762-M4x10-S10 5,00

16 M4 920BSC-4762-M4x16-S10 5,00

20 M4 920BSC-4762-M4x20-S10 5,00

25 M4 920BSC-4762-M4x25-S10 5,00

10 M6 920BSC-4762-M6x10-S10 6,00

16 M6 920BSC-4762-M6x16-S10 6,00

20 M6 920BSC-4762-M6x20-S10 6,00

25 M6 920BSC-4762-M6x25-S10 6,00

30 M6 920BSC-4762-M6x30-S10 6,00

35 M6 920BSC-4762-M6x35-S10 6,50

40 M6 920BSC-4762-M6x40-S10 7,00

10 M8 920BSC-4762-M8x10-S10 8,50

16 M8 920BSC-4762-M8x16-S10 7,50

20 M8 920BSC-4762-M8x20-S10 7,50

25 M8 920BSC-4762-M8x25-S10 7,50

30 M8 920BSC-4762-M8x30-S10 7,50

35 M8 920BSC-4762-M8x35-S10 8,00

40 M8 920BSC-4762-M8x40-S10 8,50

45 M8 920BSC-4762-M8x45-S10 9,00

50 M8 920BSC-4762-M8x50-S10 10,00

20 M10 920BSC-4762-M10x20-S10 11,00

25 M10 920BSC-4762-M10x25-S10 11,00

30 M10 920BSC-4762-M10x30-S10 11,00

35 M10 920BSC-4762-M10x35-S10 11,00

40 M10 920BSC-4762-M10x40-S10 11,50

45 M10 920BSC-4762-M10x45-S10 12,50

50 M10 920BSC-4762-M10x50-S10 13,50

55 M10 920BSC-4762-M10x55-S10 14,50

60 M10 920BSC-4762-M10x60-S10 15,50

A

B

Screws and Bolts


Hexagon Head Bolts

A [mm]

B = Thread Item No. Price €

14 M4 950BSC-ISO4017-M4x14-S10 4,00

20 M4 950BSC-ISO4017-M4x20-S10 4,00

30 M4 950BSC-ISO4017-M4x30-S10 4,50

20 M6 950BSC-ISO4017-M6x20-S10 4,00

35 M6 950BSC-ISO4014-M6x35-S10 4,50

50 M6 950BSC-ISO4014-M6x50-S10 5,00

30 M8 950BSC-ISO4017-M8x30-S10 4,50

35 M8 950BSC-ISO4014-M8x35-S10 5,00

40 M8 950BSC-ISO4014-M8x40-S10 5,00

45 M8 950BSC-ISO4014-M8x45-S10 5,50

50 M8 950BSC-ISO4014-M8x50-S10 5,50

55 M8 950BSC-ISO4014-M8x55-S10 5,50

60 M8 950BSC-ISO4014-M8x60-S10 6,00

65 M8 950BSC-ISO4014-M8x65-S10 6,00

70 M8 950BSC-ISO4014-M8x70-S10 6,50

80 M8 950BSC-ISO4014-M8x80-S10 7,00

90 M8 950BSC-ISO4014-M8x90-S10 9,50

50 M10 950BSC-ISO4014-M10x50-S10 7,00

65 M10 950BSC-ISO4014-M10x65-S10 7,50

70 M10 950BSC-ISO4014-M10x70-S10 8,00

70 M12 950BSC-ISO4014-M12x70-S10 10,00

75 M12 950BSC-ISO4014-M12x75-S10 10,50

90 M16 950BSC-ISO4014-M16x90-S10 18,00

100 M16 950BSC-ISO4014-M16x100-S10 21,00

Zinc-plated Steel, Property Class 8.8, 10 Pcs per Package A

BA

[mm]B = Thread Item No. Price €

14 M4 920BSC-ISO4017-M4x14-S10 4,00

20 M4 920BSC-ISO4017-M4x20-S10 4,00

30 M4 920BSC-ISO4017-M4x30-S10 4,50

20 M6 920BSC-ISO4017-M6x20-S10 4,50

35 M6 920BSC-ISO4014-M6x35-S10 5,50

50 M6 920BSC-ISO4014-M6x50-S10 6,50

30 M8 920BSC-ISO4017-M8x30-S10 6,50

35 M8 920BSC-ISO4014-M8x35-S10 7,00

40 M8 920BSC-ISO4014-M8x40-S10 7,50

45 M8 920BSC-ISO4014-M8x45-S10 7,50

50 M8 920BSC-ISO4014-M8x50-S10 8,00

55 M8 920BSC-ISO4014-M8x55-S10 8,50


Screws and Bolts


Hexagon Head Bolts,Stainless Steel A2-70; 10 Pcs per Package

Stainless Steel A4-80; 10 Pcs per PackageA

[mm]B = Thread Item No. Price €

14 M 970BSC-ISO4017-M4x14-S10 5,00

20 M4 970BSC-ISO4017-M4x20-S10 5,00

30 M4 970BSC-ISO4017-M4x30-S10 5,00

20 M6 970BSC-ISO4017-M6x20-S10 5,50

35 M6 970BSC-ISO4014-M6x35-S10 6,50

50 M6 970BSC-ISO4014-M6x50-S10 7,50

30 M8 970BSC-ISO4017-M8x30-S10 8,50

35 M8 970BSC-ISO4014-M8x35-S10 10,00

40 M8 970BSC-ISO4014-M8x40-S10 10,00

45 M8 970BSC-ISO4014-M8x45-S10 10,50

50 M8 970BSC-ISO4014-M8x50-S10 11,50

55 M8 970BSC-ISO4014-M8x55-S10 12,50

60 M8 970BSC-ISO4014-M8x60-S10 12,50

65 M8 970BSC-ISO4014-M8x65-S10 15,00

70 M8 970BSC-ISO4014-M8x70-S10 16,00

80 M8 970BSC-ISO4014-M8x80-S10 21,50

90 M8 970BSC-ISO4014-M8x90-S10 25,00

50 M10 970BSC-ISO4014-M10x50-S10 17,00

65 M10 970BSC-ISO4014-M10x65-S10 21,00

70 M10 970BSC-ISO4014-M10x70-S10 22,00

70 M12 970BSC-ISO4014-M12x70-S10 30,00

75 M12 970BSC-ISO4014-M12x75-S10 40,50

90 M16 970BSC-ISO4014-M16x90-S10 67,00

100 M16 970BSC-ISO4014-M16x100-S10 73,00

A [mm]

B = Thread Item No. Price €

60 M8 920BSC-ISO4014-M8x60-S10 8,50

65 M8 920BSC-ISO4014-M8x65-S10 10,50

70 M8 920BSC-ISO4014-M8x70-S10 11,00

80 M8 920BSC-ISO4014-M8x80-S10 13,00

90 M8 920BSC-ISO4014-M8x90-S10 15,50

50 M10 920BSC-ISO4014-M10x50-S10 12,00

65 M10 920BSC-ISO4014-M10x65-S10 14,00

70 M10 920BSC-ISO4014-M10x70-S10 14,50

70 M12 920BSC-ISO4014-M12x70-S10 19,00

75 M12 920BSC-ISO4014-M12x75-S10 27,00

90 M16 920BSC-ISO4014-M16x90-S10 40,00

100 M16 920BSC-ISO4014-M16x100-S10 42,50

Screws and Bolts


Nuts


M4 920BMU-ISO4032-M4-S25 4,00

M6 920BMU-ISO4032-M6-S25 5,00

M8 920BMU-ISO4032-M8-S25 7,00

M10 920BMU-ISO4032-M10-S25 11,00

M12 920BMU-ISO4032-M12-S25 14,00

M16 920BMU-ISO4032-M16-S25 22,00



M4 950BMU-ISO4032-M4-S25 4,00

M6 950BMU-ISO4032-M6-S25 5,00

M8 950BMU-ISO4032-M8-S25 6,00

M10 950BMU-ISO4032-M10-S25 8,00

M12 950BMU-ISO4032-M12-S25 10,00

M16 950BMU-ISO4032-M16-S25 16,00

Zinc-plated Stainless Steel, Index 8, 25 Pcs per Package


M4 970BMU-ISO4032-M4-S25 5,00

M6 970BMU-ISO4032-M6-S25 6,00

M8 970BMU-ISO4032-M8-S25 10,00

M10 970BMU-ISO4032-M10-S25 16,00

M12 970BMU-ISO4032-M12-S25 22,00

M16 970BMU-ISO4032-M16-S25 40,00


Screws and Bolts


Washers

A [Thread]

B [mm]

Item No. Price €

M4 4,3 950BUS-7089-M4-S25 4,00

M6 6,4 950BUS-7089-M6-S25 4,50

M8 8,4 950BUS-7089-M8-S25 5,50

M10 10,5 950BUS-7089-M10-S25 6,00

M12 13 950BUS-7089-M12-S25 7,00

M16 17 950BUS-7089-M16-S25 10,00

A [Thread]

B [mm]

Item No. Price €

M4 4,3 920BUS-7089-M4-S25 3,50

M6 6,4 920BUS-7089-M6-S25 4,00

M8 8,4 920BUS-7089-M8-S25 4,50

M10 10,5 920BUS-7089-M10-S25 5,00

M12 13 920BUS-7089-M12-S25 7,00

M16 17 920BUS-7089-M16-S25 10,00

A [Thread]

B [mm]

Item No. Price €

M4 4,3 970BUS-7089-M4-S25 4,00

M6 6,4 970BUS-7089-M6-S25 4,50

M8 8,4 970BUS-7089-M8-S25 6,00

M10 10,5 970BUS-7089-M10-S25 9,00

M12 13 970BUS-7089-M12-S25 14,00

M16 17 970BUS-7089-M16-S25 20,00

Zinc-plated Steel, 25 Pcs per Package

Stainless Steel A2, 25 Pcs per Package

Stainless Steel A4, 25 Pcs per Package

B

Screws and Bolts


Stud Screws

A [Thread]

B [mm]

C [mm]

D [mm]

Item No. Price €

M6 20 18 6 920BST-M6x20-S10 12,50

M6 25 18 6 920BST-M6x25-S10 13,00

M6 30 18 6 920BST-M6x30-S10 13,00

M6 35 18 6 920BST-M6x35-S10 13,50

M8 30 22 8 920BST-M8x30-S10 15,50

M8 35 22 8 920BST-M8x35-S10 16,00

M8 40 22 8 920BST-M8x40-S10 16,00

M8 45 22 8 920BST-M8x45-S10 16,50

M8 50 22 8 920BST-M8x50-S10 17,00

M8 55 22 8 920BST-M8x55-S10 17,50

M8 60 22 8 920BST-M8x60-S10 21,00

M10 25 22 8 920BST-M10x25-S10 15,50

M10 40 26 10 920BST-M10x40-S10 20,00


A

C

D B




Flange Size [DN]

A [mm]

B Thread

PKG. [Qty.]

Item No. Price €

63-100 40 M8 8 550BSC100 10,00

160-250 50 M10 12 550BSC250 20,00

320-500 65 M12 16 550BSC500 22,00

630 70 M12 20 550BSC630 25,00

Flange Size [DN]

A [mm]

B Thread

PKG. [Qty.]

Item No. Price €

63-100 40 M8 8 520BSC100 9,60

160-250 50 M10 12 520BSC250 16,00

320-500 65 M12 16 520BSC500 36,00

630 70 M12 20 520BSC630 46,00

A

B

Screws and Bolts


A

B

A

B

Stainless Steel A2


CF Hexagon Head Screw Set for Flanges with Through-holes

CF Hexagon Head Screw Set for Flanges with Tapped Holes

q For installing two flanges with through-holesq Set includes the screws required for the specified flange sizeq Includes two washers and one nut for each screw

q For installing a flange with through-holes on a flange with tapped holesq Ideal for installing gate valvesq Set includes the screws required for the specified flange sizeq One screw and one washer

Flange Size [DN]

A [mm]


16 20 M4 6 420BSC016-20 3,30

25 35 M6 4 420BSC025-35 4,00

40 35 M6 6 420BSC040-35 4,20

50 45 M8 8 420BSC050-45 6,40

63 45 M8 8 420BSC063-45 6,40

75 45 M8 10 420BSC075-45 8,00

100 50 M8 16 420BSC100-50 12,80

130 55 M8 18 420BSC130-55 15,50

160 55 M8 20 420BSC160-55 17,00

200 60 M8 24 420BSC200-60 21,60

250 65 M8 32 420BSC250-65 32,00

300 70 M10 30 420BSC300-70 47,00

350 70 M10 36 420BSC350-70 56,00

400 70 M10 36 420BSC400-70 56,00

Flange Size [DN]

A [mm]


16 14 M4 6 420BSC016-14 3,30

40 20 M6 6 420BSC040-20 4,20

63 30 M8 8 420BSC063-30 6,50

100 30 M8 16 420BSC100-30 12,80

160 35 M8 20 420BSC160-35 17,00

200 35 M8 24 420BSC200-35 21,60

250 35 M8 32 420BSC250-35 32,00

Screws and Bolts


A

Bq For installing a spacer between two standard flanges with through-holesq Set includes the screws required for the specified flange sizeq Includes two washers and one nut for each screw

q Set includes screws and washers for the specified flange sizeq Easy assembly with only one wrench (no counter-tightening necessary)


CF Hexagon Head Screw Set for Spacer Flanges

Flange Size [DN]

A [mm]


16 30 M4 6 420BSC016-30 3,30

40 50 M6 6 420BSC040-50 4,20

63 65 M8 8 420BSC063-65 8,00

100 70 M8 16 420BSC100-70 16,50

160 80 M8 20 420BSC160-80 24,50

200 90 M8 24 420BSC200-90 35,00

250 90 M8 32 420BSC250-90 47,00

A

B

C

BStainless Steel 304; Screws: A2-70

CF Plate Nut Sets

Flange Size [DN]

A [mm]

B = Threads C [mm]

Sets per Pkg. Item No. Price €

16 13,5 M4 20 3 420BMD016 6,00

40 29,3 M6 35 3 420BMD040 8,00

63 35,2 M8 45 4 420BMD063 19,00

100 25,4 M8 50 8 420BMD100 32,00

160 28,3 M8 55 10 420BMD160 40,00

Per flange size, one screw set incl. plate nut available individually

Screws and Bolts


A

C

D BStainless Steel A2

CF Stud Screw Set with Hexagon Nutq 10 sets per packageq Includes washer and one nut for each screw

q For installing two flanges with through-holesq Easy assembly with only one wrench (no counter-tightening necessary)q Set contains two horseshoe nut plates with screws and washers

Flange Size [DN]

A [Thread]

B [mm]

C [mm]

D [mm]

Item No. Price €

25-40 M6 25 18 6 420BST-M6x25 12,00

25-40 M6 30 18 6 420BST-M6x30 12,00

25-40 M6 35 18 6 420BST-M6x35 12,00

63-250 M8 40 22 8 420BST-M8x40 15,50

63-250 M8 45 22 8 420BST-M8x45 16,50

63-250 M8 50 22 8 420BST-M8x50 19,00

63-250 M8 55 22 8 420BST-M8x55 20,50

63-250 M8 60 22 8 420BST-M8x60 22,00

Stainless Steel 304/1.4301; Screws: A2-70

CF Hexagon Head Screw Set with Horseshoe Nuts

Flange Size [DN]

A [mm]

B [mm]

C [mm]

D = Threads E [mm]

Item No. Price €

16 34 20 6 M4 20 420BMH016 28,00

40 69,6 45 9 M6 35 420BMH040 38,00

63 113,5 80 12 M8 45 420BMH063 52,00

100 151,6 115 12 M8 50 420BMH100 60,00

160 202,4 165 12 M8 55 420BMH160 90,00

D

ØA

ØB

C

E

D

Screws and Bolts




COF Screw Setq For the assembly of two flanges with through holesq Set includes the screws required for the specified flange sizeq Set includes two washers and one nut for each screw

Flange Size [DN]

A [mm]


Item No. Price €

250 65 M10 24 620BSC250 45,00

300 65 M10 32 620BSC300 60,00

350 70 M12 36 620BSC350 95,00

400 75 M12 36 620BSC400 100,00

450 90 M16 36 620BSC450 190,00

500 100 M16 36 620BSC500 200,00

600 100 M16 40 620BSC600 220,00

800 100 M16 52 620BSC800 220,00

Flange Size [DN]

A [mm]


Item No. Price €

250 65 M10 24 670BSC250 65,00

300 65 M10 32 670BSC300 80,00

350 70 M12 36 670BSC350 120,00

400 75 M12 36 670BSC400 140,00

450 90 M16 36 670BSC450 240,00

500 100 M16 36 670BSC500 255,00

600 100 M16 40 670BSC600 280,00

800 100 M16 52 670BSC800 364,00

A

B

NOTES

Use of brand names

Brand name Swagelok:Swagelok®

VCR®

Brand name Dupont:Viton®

Perbunan®

Neopren®

Teflon®

Kalrez®

Brand name Schott:Borofloat®

Brand name Morton International:Cleartran®

Brand name Dow Corning:Molykote®

Brand name Apiezon:Apiezon®

Brand name VAT:VAT®

www.trinos.de

Germany

TRINOS Vakuum-Systeme GmbHAnna-Vandenhoeck-Ring 4437081 GoettingenPhone: +49 (0) 551 999 [email protected]

Pfeiffer Vacuum GmbHHeadquartersBerliner Strasse 4335614 AsslarPhone: +49 (0) 6441 [email protected]

Benelux

Pfeiffer Vacuum GmbHSales & Service BeneluxPhone: [email protected]

India

Pfeiffer Vacuum India Ltd.Phone: +91 40 2775 [email protected]

Sweden

Pfeiffer Vacuum Scandinavia ABPhone: +46 8 590 748 [email protected]

China

Pfeiffer Vacuum(Shanghai) Co., Ltd.Phone: +86 21 3393 [email protected]

Italy

Pfeiffer Vacuum Italia S.p.A.Phone: +39 02 93 99 05 [email protected]

Switzerland

Pfeiffer Vacuum (Schweiz) AGPhone: +41 44 444 22 [email protected]

Spain

TRINOS Vacuum Projects, S.LPhone: +34 96 134 48 [email protected]

France

Pfeiffer Vacuum France SASPhone: +33 169 30 92 [email protected]

Korea

Pfeiffer Vacuum Korea Ltd.Phone: +82 31 266 [email protected]

United States

Pfeiffer Vacuum Inc.Phone: +1 603 578 [email protected]

Great Britain

Pfeiffer Vacuum Ltd.Phone: +44 1908 [email protected]

Austria

Pfeiffer Vacuum Austria GmbHPhone: +43 1 894 17 [email protected]

Documents

Catalog Int 250111