12Ti

13CF

16XS

10SS• Crack Free Design• Casing Friendly

• Optimized Tool Wear Resistance• Flexible Rebuild Design

Optimized Performance

For Oil and Gas drillingHardbanding

Description:

OTW 16XS Extreme Service is a product ideally suited for drilling in the most demanding ERD and Ultra ERD wells.

The unique nature of these wells puts severe stress on the drill string, prompting the industry to respond with High

performance Tool Joint Connections (XT™, VX™, TT™). These connections produce higher torque values with lower drag

and wall thickness. This requires increased reinforcement through optimized hardbanding solutions, resulting in

heightened structural integrity and minimal dilution, while still providing effective overall durability.

OTW 16XS was specifi cally designed for use in Ultra Deepwater applications, where most wells are highly deviated and

extremely deep. As these wells require the highest level of strength and prolonged performance, OTW 16XS not only

contains superior casing friendly properties, but also demonstrates a unique ability to offer the best wear-resistant

materials in both open hole and cased hole environments.

Providing the highest casing & open hole wear resistance, OTW 16XS contains a uniquely weighted mix of multi-

carbides (Cr, Ti, Mo, and W), which is dispersed uniformly throughout a tempered martensitic micro-structure.

This creates superior thickness and anti-wear properties, which maximize wear resistance, strength and longevity.

OTW 16XS is also able to be cost-effectively reapplied over itself and most standard, non-cracking wires for drill pipe

refurbishment and reinstatement.

Extreme Service is a product ideally suited for drilling in the most demanding ERD and Ultra ERD wells.

Description:

OTW 16XS Extreme Service is a product ideally suited for drilling in the most demanding ERD and Ultra ERD wells. Extreme Service is a product ideally suited for drilling in the most demanding ERD and Ultra ERD wells.

0

2

4

6

8

10

12

14

0

0.05

0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

is also able to be cost-effectively reapplied over itself and most standard, non-cracking wires for drill pipe

Product A* - Cracking type alloy, Product B & C - designed to be crack free, Product D* - suspected cracking

Mohr T95 Casing Wear (%)

S-135 TJ-steel OTW 16XS Product A Product B Product C Product D OTW 16XS Product A Product B Product C Product D

ASTM G65 Abrasion Wear TestProcedure “A”

OTW 16XS hardbanding alloy applied on a tool-joint

(%)(gram loss)

**

Overview:

• Advanced coating chemistry and microstructure

• Very Casing friendly

• Acknowledged hardbanding alloy in Ultra deep water drilling

• Excelent open hole resistance

• Ideal for multiple layer applications

12Ti

13CF

16XS

10SS

12Ti

13CF

16XS

10SS