Embed Size (px)
DESCRIPTION
The flue system selected was a stainless steel fully welded twin wall 4 hour fire rated system with 30mm insulation. Airtherm provided a cost-efficient solution for the client and furthermore we exceeded their expectations when our tender was some margin under the original budget offered by the Hamworthy flue division. The flue system installed comprised of a 2.5m horizontal run and a 3m vertical, incorporating the necessary drains to allow any unwanted condense to evacuate the system
Citation preview
Consultant
■ Worcestershire Council
Client
■ EMS
Sector
■ Education
Products
■ MasterFlue System
Equipment
■ Hamworthy PV110c
Application
■ Condensing
0844 809 2509 | airtherm.co.uk | [email protected]
Project Profile
Swan Lane First School, Evesham
Front Entrance
Airtherm Masterflue
Airtherm Engineering Limited has recently completed a flue installation, working closely with the contractor, providing technical data and drawings at Swan Lane First School, Evesham, Worcestershire.
The flue system selected is a stainless steel fully welded twin wall 4 hour
fire rated system with 30mm insulation.
Airtherm provided a cost-efficient solution for the client, and furthermore we
exceeded their expectations when our tender was some margin under the
original budget offered by the Hamworthy flue division.
The flue system installed comprised of a 2.5m horizontal run and a 3m
vertical, incorporating the necessary drains to allow any unwanted condense
to evacuate the system.
Twin Wall Flue System
Vertical Stack
British Standards The products we use are approved and CE marked to EN 1856-1 and
manufactured under a quality assurance scheme, certificate no
issued upon request, administered by British Standards in
accordance with BS EN 9001: 2008.
• Boilers: Hanmworthy
• Model: Modumax Variheat PV110c
• Application: Chimney / Flue system
• Operating mode: Wet
• Pressure: Negative / positive pressure
• Working pressure: 200 Pa (product will operate 1000pa max)
• Inner wall: 316L1.4404/1.457 thickness ≤ Ø250 0,4 mm
• Outer wall: AISI 304/ 1.4301 thickness 0,5 / 0,6 mm
• Insulation: 30mm thick Rockwool insulation
• Sealant : tri-lip 'o' type silicone ring
• Fuel type: Gas
• Other Application METALOTERM MasterFlue
• Condensing boilers
• Atmospheric gas-fired boilers
• Gas blown boilers
• Industrial ovens, large-scale establishments
• Wood-fired stoves
• Other Advantages METALOTERM MasterFlue
• No terminal bridges, better heat protection
• High-temperature silicone sealing ring
• Fast-build system without the need of sealants
• High quality insulation uninterrupted from base plate to top stub
0844 809 2509 | airtherm.co.uk | [email protected]
Product Solution
Airtherm Masterflue
Contact Details:
Airtherm Engineering Ltd
Ventilation House
Pedmore
Stoubridge
West Midlands
DY9 0DS
Tel: 0844 8092509
Fax: 01562 887312
MasterFlue
