Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
508 South D Road - Giltner, NE 68841 61028080
(402) 849-2674 - www.bishenterprise.com - [email protected]
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Case IH® in any way or form. The term “Case IH”, and any images of Case IH® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Case IH®.
• Highest Quality Adapters on the Market, withComplete Solutions Available!
• Large Knowledge Base, We’ve Been BuildingAdapters Since 1976!
• Improve your Performance in Some Situations.
• Quality Conversions, Both Functionally andCosmetically.
Case IH Header Adapters:
The Complete Solution o We Stock the Adapter(s), Upright Kit(s), Telescoping Power Shaft(s), and Electrical Conversion(s)
Case IH® Heads can be Adapted to Fit Almost Any Combine! o We Offer kits for Case IH ® Headers to:
Cat Challenger® Cat® / Claas® / Lexion® Gleaner® John Deere® Massey Ferguson®
New Holland® White® Oliver® Others Can Be Custom Built
Case IH® Combines can be Adapted to Fit Almost Any Header! o We Offer Kits for Case IH ® Combines to:
Cat Challenger® Cat® / Claas® / Lexion® Gleaner® John Deere®
Massey Ferguson® New Holland® Shelbourne Reynolds® Others Can Be Custom Built
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
700-0027-LL Case IH
Cornheads Only
800 - 900 - 1000 Series
OnlyJohn Deere
All Years4400 - 9860
Level Land Feederhouse
Will not work on 70 Series or S Series
83.69"
21 Spline or 1-1/8" Hex
(Must Specify)
•Bolt in pieces •Remove Feederhouse Chain Cover 2-4 $1,995
1x 26" Female 1-1/8" Hex 14 Series
1x 28" Male 1-1/8" Hex 14 Series
STS Series Combine Requires 21 Spline Female
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
N/A Not Typically Required N/A
700-0027-LL Case IH
Cornheads Only
800 - 900 - 1000 Series
OnlyJohn Deere
All Years4400 - 9860
Level Land Feederhouse
Will not work on 70 Series or S Series
83.69"
21 Spline or 1-1/8" Hex
(Must Specify)
•Bolt in pieces •Remove Feederhouse Chain Cover 2-4 $1,995
1x 26" Female 1-1/8" Hex 14 Series
1x 28" Male 1-1/8" Hex 14 Series
STS Series Combine Requires 21 Spline Female
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
N/A Not Typically Required N/A
700-0027-CM Case IH
Cornheads Only
800 - 900 - 1000 Series
OnlyJohn Deere
All Years9400 - S Series Contour Master Feederhouse
83.69"
21 Spline(Must Specify)
•Bolt in pieces •Remove Feederhouse Chain Cover 2-4
$1,995
1x 26" Female 1-1/8" Hex 14 Series
1x 28" Male 1-1/8" Hex 14 Series
STS Series Combine Requires 21 Spline Female
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
N/A Not Typically Required N/A
700-0027-CM Case IH
Cornheads Only
800 - 900 - 1000 Series
OnlyJohn Deere
All Years9400 - S Series Contour Master Feederhouse
83.69"
21 Spline(Must Specify)
•Bolt in pieces •Remove Feederhouse Chain Cover 2-4
$1,995
1x 26" Female 1-1/8" Hex 14 Series
1x 28" Male 1-1/8" Hex 14 Series
STS Series Combine Requires 21 Spline Female
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
N/A Not Typically Required N/A
700-0270 Case IH
Cornheads Only
22 - 3400 Series
John Deere
All Years4400 - 9750 / 9560 - S Series Level Land or
Contour Master Feederhouse
4400 - 975092" 1-1/8" Hex
STS Series83.69" 21 Spline
(Must Specify)
•Requires Hooks on Feederhouse
•Bolt in pieces
•Move or Remove Gearbox, Install Bearing Holder &
Change TPS•New Backshafts Can Be Provided @ an Additional
Cost
2-4$1,995
1x 12.75" Female 21 spline
1x 14" Male 1-1/4" Hex Push Button
1x 18.75" Female 21 Spline Autolock
11" Bearing Plate
30" Bearing Plate
Single Point Coupler
992-LAN166991$714.15
Storage Bracket992-
LAN204828BLKS
Please Inquire
8820 / 9600 / 9610 Will require Stub
Shaft on Left Side 507-1110
4400 - 9500Will require hook
kit
700-0271 Case IH
Chopping Cornheads
Only
Case 2600 & 4400 Series
John Deere
All Years4400 - S / Series
Level Land or Contour Master Feederhouse
83.69"
21 Spline(Must Specify)
•Requires Hooks on Feederhouse
•Bolt in pieces
•Verify Backshaft Diameter: 1-1/8" Hex or 30mm are
options
•Stub shafts are best option if customer will approve
3-5$1,995 Yoke Change or
Stub Shaft Adapter Only
Not Typically Required
Single Point Coupler
992-LAN166991$714.15
Storage Bracket992-
LAN204828BLKS
Please InquireYoke Change and /
or Stub Shaft Adapter
700-0272-C Case IH
Cornheads Only
Case 2200 Series
Case IH
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters
this is the factory plate that Comes in the 2200 series head. We have not drawn
this adapter. Purchase these used from local
dealers and resell.
3-5 $1,795.00
Not Typically Necessary
Yoke Change1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Not typically required. Call if
harnesses do not match.
Not typically required. Call if
harnesses do not match.
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0272-PAdjustable
Case IH
Platform / Cutterbar Only 2020 Case IH
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters
this is the factory plate that Comes in the 2200 series head. We have not drawn
this adapter. Purchase these used from local
dealers and resell.
3-5 $2,995.00
Not Typically Necessary
Yoke Change1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0272-PNon-
AdjustableCase IH
Platform / Cutterbar Only 2020 Case IH
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters
this is the factory plate that Comes in the 2200 series head. We have not drawn
this adapter. Purchase these used from local
dealers and resell.
3-5 $2,595.00
Not Typically Necessary
Yoke Change1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0279 Case IH
Cornheads Only
Case 2600 & 4400 Series
Case IH
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters
700-0271 & 700-0009 Together 3-5 $2,795.00
Not Typically Necessary
Yoke Change1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0371 Case IH
Cornheads Only
Case 2400 - 3400
Case IH
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters•Relocate TPS
We must verify whether the combine is equipped with
the later single latch connector found on 2577 & 2588 combines. Stub shaft adapters normally provided.
1-2 $3,295.00
Not Typically Necessary
Yoke Change1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0371 Case IH Platform 3020 Case IH
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters•Relocate TPS
We must verify whether the combine is equipped with
the later single latch connector found on 2577 & 2588 combines. Stub shaft adapters normally provided.
1-2 $3,295.00
Not Typically Necessary
Yoke Change1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-0375 Case IH
Cornheads Only
2200 & 3200 Series
Case IH
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 / 9250
85"
6 Spline
•4" Wedge Kit
•Replace Male Half of TPS
4-6 $3,995.00
6 Row 1x 1 Meter star shaped shaft &
Plastic
8 Row2x 1 Meter Star Shaped Shaft &
Plastic
6 Row 30"1x Auger Slip
Clutch Shield 1x Shield Lid 1x
Upright
6 Row 36"1x 30" LH Long
Bearing Plate 1x 4-
Hydraulic Block992-LAN2P5065-
2AFC$230
Custom Build
Please Call
Not Typically Necessary
700-0375 Case IH
Cornheads Only
2200 & 3200 Series
Case IH
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 5150 / 6150 / 7150
72"
6 Spline
•4" Wedge Kit
•Replace Male Half of TPS
4-6 $3,995.00
6 Row 1x 1 Meter star shaped shaft &
Plastic
8 Row2x 1 Meter Star Shaped Shaft &
Plastic
6 Row 30"1x Auger Slip
Clutch Shield 1x Shield Lid 1x
Upright
6 Row 36"1x 30" LH Long
Bearing Plate 1x 4-
Hydraulic Block992-LAN2P5065-
2AFC$230
Custom Build
Please Call
Not Typically Necessary
Hybrid Frame Kit
Case IH
Cornheads Only
1000 Series Row UnitsAny Year
Case IH
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 / 9250
85"
6 SplineUpgrade Frame
Transfer all row units and components to a Bish Built
frame that will accommodate the Case
8010 & NH CR as well as most other machines with
additional adapters
N/A Please Call To Inquire
2x 35 Series 28" Female (6 or 21)
Spline
2x 35 Series 21" Male 1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
Hybrid Frame Kit
Case IH
Cornheads Only
1000 Series Row UnitsAny Year
Case IH
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 SplineUpgrade Frame
Transfer all row units and components to a Bish Built
frame that will accommodate the Case
8010 & NH CR as well as most other machines with
additional adapters
N/A Please Call To Inquire
2x 35 Series 28" Female (6 or 21)
Spline
2x 35 Series 21" Male 1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
Hybrid Frame Kit
Case IH
Cornheads Only
1000 Series Row UnitsAny Year
New Holland
- to 2013 CR 970 / 980 / 9080 /
8090 / 9090 / 9.80 / 9.90 / 10.90
CX 720 / 740 / 760 / 780 / 8030 / 8040 /
8050 / 8060 / 8070 / 8080 / 8090 / 820 /
840 / 860 / 880
85"(Must Specify)
6 Spline
Shaved
Upgrade Frame
Transfer all row units and components to a Bish Built
frame that will accommodate the Case
8010 & NH CR as well as most other machines with
additional adapters
N/A Please Call To Inquire
2x 35 Series 28" Female (6 or 21)
Spline
2x 35 Series 21" Male 1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
Hybrid Frame Kit
Case IH
Cornheads Only
1000 Series Row UnitsAny Year
New Holland
- to 2013 CR 920 / 940 / 960 / 9040 / 9060 / 9070 / 6090 / 7090 / 8080
CX 720 / 740 / 760 / 780 / 8030 / 8040 /
8050 / 8060 / 8070 / 8080 / 8090 / 820 /
840 / 860 / 880
74"(Must Specify)
6 Spline
Shaved
Upgrade Frame
Transfer all row units and components to a Bish Built
frame that will accommodate the Case
8010 & NH CR as well as most other machines with
additional adapters
N/A Please Call To Inquire
2x 35 Series 28" Female (6 or 21)
Spline
2x 35 Series 21" Male 1-1/8" Hex
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-0029-CH Case IH
Cornheads Only All Massey
Red Feederhouse
Rotary - 8560 / 8570 / 8590 / 8780
90" 1-1/4" Hex
•Adapter Plate •Convert to TPS
•Tight fit may require a little grinding to adapter plate or
to head and /or feederhouse.
•If equipped with Smart-
Trac, Refer to kit 700-0011-ST
1-2 $1,795.00
2x 26" Female 1-1/4" Hex 14 Series
2x 28" Male 1-1/8" Hex 14 Series
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0301-O Case IH
22 - 2400 Series All Gleaner
R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6
/ R7
Level Land Feederhouse Only
90"
21 Spline
•Adapter Plate•Convert or
Relocate TPS
•Remove or move gear boxes and replace power
shafts.
•If equipped with Smart-Trac, Refer to kit 700-0011-
ST
3-5 $1,995.00
28" Female 21 Spline 14 / 35 Series on Left
31" Male 1-1/8" or 1/1/4 Hex 14 / 35
Series on Left
26" Female 21 Spline 14 / 35
Series on Right
28" Male 1-1/8" or 1-1/4" Hex 14 / 35
Series on Right
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0301-C Case IH
22 - 2400 Series All Gleaner
R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6
/ R7
Level Land Feederhouse Only
90"
21 Spline
•Adapter Plate•Convert or
Relocate TPS
•Remove or move gear boxes and replace power
shafts.
•If equipped with Smart-Trac, Refer to kit 700-0011-
ST
3-5 $1,995.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Stalkmaster (chopping)
Requires 44 Series
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0030 Case IH
800, 900, 1000 Series
CornheadsCutter BarPlatform
All Gleaner
R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6
/ R7
Level Land Feederhouse Only
90"
21 Spline
•Adapter Plate •Convert to TPS
•If equipped with Smart-Trac, Refer to kit 700-0011-
ST1-2 $1,495.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Stalkmaster (chopping)
Requires 44 Series
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0031
800, 900, 1000, 2200
Series Cornheads
All Gleaner L / M •Adapter Plate •Convert to TPS 1-2 $1,495.00
2x 26" Female 1-1/4" Hex 14 Series
2x 28" Male 1-1/8" Hex 14 Series
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0033 Case IH
800, 900, 1000, 2200
Series Cornheads
All New Holland
Lower DriveTR - 70 / 75 / 76 / 85 / 86 / 87 / 88 / 89 / 95 /
96 / 97 / 98 / 99
72"
6 Spline
•Adapter Plate•Convert to TPS 1-2 $1,495.00
2x 26" Female 1-1/4" Hex 14 Series
2x 28" Male 1-1/8" Hex 14 Series
800 & 900 Series500-0102
CIH 1063500-0106
CIH 1083500-0110
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0036 Case
Corn Heads Only
2200 -24003200-3400
SeriesCAT Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Convert or
Relocate TPS
Requires parts from 3 adapters ( 700 - 0270 + 700-0008 + 700-0036)
Feeder House Components Provided. Back Drive shaft cut back to center support
bearing.
3 $2,495 2x 1 Meter Star Shaped Shaft &
PlasticPlease Inquire Please Inquire
Custom Build
Please Call
Not Typically Necessary
700-0037 Case
Corn Heads Only
2200 -24003200-3400
SeriesCAT Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Convert or
Relocate TPS
Requires parts from 3 adapters ( 700 - 0270 + 700-0008 + 700-0036)
Feeder House Components Provided. Back Drive shaft cut back to center support
bearing.
4 $2,495.002x 1 Meter Star Shaped Shaft &
PlasticPlease Inquire Please Inquire
Custom Build
Please Call
Not Typically Necessary
700-0007-N john Deere Corn Head40, 50A, or 90 Series 8r 30" and Smaller
case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 5088 - 5130-6130
Models4-6 $1,995.00
2x 26" Female 6 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-N john Deere Corn Head40, 50A, or 90 Series 8r 30" and Smaller
case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 5088 - 5130-6130
Models4-6 $1,995.00
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-N john Deere Corn Head40, 50A, or 90 Series 8r 30" and Smaller
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 5088 - 5130-6130
Models4-6 $1,995.00
2x 26" Female 6 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-N john Deere Corn Head40, 50A, or 90 Series 8r 30" and Smaller
case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 5088 - 5130-6130
Models4-6 $1,995.00
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-W john Deere Corn Head
40, 50A, or 90 Series
12r 20" and Larger, Also 8r
36" - 38"
case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•Add Stripper Extensions For Xx88 - 5130-6130
Models6-8 $2,795.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/8" Hex Male 35
Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-W john Deere Corn Head
40, 50A, or 90 Series
12r 20" and Larger, Also 8r
36" - 38"
case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
21 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•Add Stripper Extensions For Xx88 - 5130-6130
Models6-8 $2,795.00
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/8" Hex Male 35
Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-W john Deere Corn Head
40, 50A, or 90 Series
12r 20" and Larger, Also 8r
36" - 38"
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
Add Stripper Extensions For Xx88 - 5130-6130
Models6-8 $2,795.00
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/8" Hex Male 35
Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-W john Deere Corn Head
40, 50A, or 90 Series
12r 20" and Larger, Also 8r
36" - 38"
case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
21 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
Add Stripper Extensions For Xx88 - 5130-6130
Models6-8 $2,795.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/8" Hex Male 35
Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-P-IH
john Deere Platform 200 or 900 Series
case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,995.00
2x 26" Female 6 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
Hydraulic Block992-LAN2P5065-
5AFC$385.25
Custom Build
Please CallStripper
Extensions$100
700-0007-P-IH
john Deere Platform 200 or 900 Series
case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,995.00
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
Hydraulic Block992-LAN2P5065-
5AFC$385.25
Custom Build
Please CallStripper
Extensions$100
700-0007-P-IH
john Deere Platform 200 or 900 Series
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,995.00
2x 26" Female 6 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
Hydraulic Block992-LAN2P5065-
5AFC$385.25
Custom Build
Please CallStripper
Extensions$100
700-0007-P-IH
john Deere Platform 200 or 900 Series
case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,995.00
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
Hydraulic Block992-LAN2P5065-
5AFC$385.25
Custom Build
Please CallStripper
Extensions$100
700-0007-1 john Deere
Corn HeadRow HeadCutter BarPlatform
600 Series700 Series40 Series90 Series
200 Series50A Series
case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
Faceplate Adapter
NONE 2 $6,495.00
2x 26" Female 6 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
OR
992-LAN2P5065-5AFC385.25
$2087.25HC0IH8D-31Q
Platform Headers Please Inquire
N/A
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-1 john Deere
Corn HeadRow HeadCutter BarPlatform
600 Series700 Series40 Series90 Series
200 Series50A Series
case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
21 Spline
Faceplate Adapter
NONE 2 $6,495.00
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
OR
992-LAN2P5065-5AFC385.25
$2087.25HC0IH8D-31Q
Platform Headers Please Inquire
N/A
700-0007-1 john Deere
Corn HeadRow HeadCutter BarPlatform
600 Series700 Series40 Series90 Series
200 Series50A Series
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
74"
6 Spline
Faceplate Adapter
NONE 2 $6,495.00
2x 26" Female 6 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
OR
992-LAN2P5065-5AFC385.25
$2087.25HC0IH8D-31Q
Platform Headers Please Inquire
N/A
700-0007-1 john Deere
Corn HeadRow HeadCutter BarPlatform
600 Series700 Series40 Series90 Series
200 Series50A Series
case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
74"
21 Spline
Faceplate Adapter
NONE 2 $6,495.00
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Hydraulic Block992-LAN2P5065-
2AFC$230
OR
992-LAN2P5065-5AFC385.25
$2087.25HC0IH8D-31Q
Platform Headers Please Inquire
N/A
700-0007-1 john Deere Flex Draper 600 Series700 Series
case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
Faceplate Adapter
NONE 2 $6,495.001x 1 meter star
Waltersheid shaft with 6 spline yolk
N/A
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$3513HD0IH85-31Q N/A
700-0007-1 john Deere Flex Draper 600 Series700 Series
case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
21 Spline
Faceplate Adapter
NONE 2 $6,495.00 1x 1 meter star Waltersheid shaft N/A
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$3513HD0IH85-31Q N/A
700-0007-1 john Deere Flex Draper 600 Series700 Series
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
74"
6 Spline
Faceplate Adapter
NONE 2 $6,495.001x 1 meter star
Waltersheid shaft with 6 spline yolk
N/A
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$3513HD0IH85-31Q N/A
700-0007-1 john Deere Flex Draper 600 Series700 Series
case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
74"
21 Spline
Faceplate Adapter
NONE 2 $6,495.00 1x 1 meter star Waltersheid shaft N/A
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$3513HD0IH85-31Q N/A
700-0007-6C-IH-E
john Deere
Corn Head
600 SERIES
Serial # -745100
case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
Please Inquire
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-6C-IH-E
john Deere
Corn Head
600 SERIES
Serial # -745100
case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
21 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695.00
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
Please Inquire
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6C-IH-E
john Deere Corn Head
600 SERIES
Serial # -745100
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
74"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-9 $3,695.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
Please Inquire
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6C-IH-E
john Deere Corn Head
600 SERIES
Serial # -745100
case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
74"
21 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-9 $3,695.00
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
Please Inquire
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6C-IH-L
john Deere Corn Head
600 SERIES
Serial #745101 -
case
- to 20175088 / 6088
F24+F46Stalkmaster (chopping) Require 44 Series Shafts/ 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695.00 Not Typically Necessary N/A
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6C-IH-L
john Deere Corn Head
600 SERIES
Serial #745101 -
case
2018 to-5140 / 6140 / 7140 / 5150 / 6150 / 7150
85"
21 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695.00 Not Typically Necessary N/A
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6C-IH-L
john Deere Corn Head
600 SERIES
Serial # 745101 -
case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
N/A
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6C-IH-L
john Deere Corn Head
600 SERIES
Serial # 745101 -
case
2018 to-5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
21 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Notched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695.00
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
N/A
Hydraulic Block992-LAN2P5065-
2AFC$230
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6P-IH-4-30
john Deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less case
- to 2017AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,995.00 Not Typically
NecessaryNot Typically Necessary
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6P-IH-4-30
john Deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less case
- to 20175088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,995.00 Not Typically
NecessaryNot Typically Necessary
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-6P-IH-4-35
john Deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more case
2018 to -AFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 /
9250
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,995.00 Not Typically
NecessaryNot Typically Necessary
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0007-6P-IH-4-35
john Deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more case
2018 to -5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,995.00 Not Typically
NecessaryNot Typically Necessary
Hydraulic Block992-LAN2P5065-
5AFC$385.25
$2087.25HC0IH8D-31Q
Stripper Extensions
$100
700-0009 john Deere
Corn HeadRow Head All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
Cut Backshafts, Install Bearing Kit For TPS (Slip Clutch Add-On - Cutter bars + $85 Per Side)
3 $1,295.00
2x 26" Female 1-1/8" Hex 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0009-P john Deere
200 & 900 Series
Cutter BarPlatform All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
•Install Slip Clutch
Cut Backshafts, Install Bearing Kit For TPS (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,295.00
2x 26" Female 1-1/8" Hex 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650 Not Typically Necessary Please Inquire N/A
700-0009-P john Deere
600 SeriesCutter BarPlatform
20 - 30 ft
All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
•Install Slip Clutch
Cut Backshafts, Install Bearing Kit For TPS (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,295.00
1x 26" Female 1-1/8" Hex 14 Series
1x 28" Male 1-1/8" Hex 14 Series
Not Typically Necessary
Not Typically Necessary Please Inquire N/A
700-0009-P-35
john Deere
200 Series Cutter BarPlatform
35 Ft or more
All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
•Install Slip Clutch
Cut Backshafts, Install Bearing Kit For TPS (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,295.00 Not Typically Necessary
Not Typically Necessary Please Inquire Please Inquire
Stub Shaft Adapter 1-1/8 Hex Female to 21 Spline Male
700-0009-6D john Deere Rigid Draper 600 Series case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate•Shaft Change
Cut Backshafts, Install Bearing Kit For TPS (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,595.00 Not Typically Necessary
Not Typically Necessary Please Inquire Please Inquire
Stub Shaft Adapter 1-1/8 Hex Female to 21 Spline Male
700-0037 New Holland
Lower Drive Heads Only 974 / 996 case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Cut & Weld Kit•Convert or
Relocate TPS
Trim vertical guides on rear of feederhouse.
NH heads are equipped with drive lines that should work on these combines.
Yoke change or Stub Shaft adapter required. Bearing
plates should not be needed.
1-2 $1,795.00 Yoke Change or Stub Shaft Adapter
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0423 New Holland
Corn Head Only 996 case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 / 9250
85"
6 Spline
•Cut & Weld Kit•Relocate TPS
Complete feederhouse modification required - See
website for information4-6 $1,495.00
2x 28" Female 6 Spline 35 Series
2x 31" Male 1-1/4" Hex 35 Series
40 & 50 Series Require 21 Spline
Female
11" Bearing Plate
30" Bearing PlatePlease Inquire Not Typically
NecessaryNot Typically Necessary
700-0423 New Holland
Corn Head Only 996 case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Cut & Weld Kit•Relocate TPS
Complete feederhouse modification required - See
website for information4-6 $1,495.00 Not Typically
NecessaryNot Typically Necessary
Not Typically Necessary
Not Typically Necessary
Not Typically Necessary
700-0371 New Holland
Cornheads
Platform 98C - 74C case
All Years1440 / 1460 / 1470 /
1480 / 14821640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 / 2588
70"
1-1/8" Hex
•Adapter Plate •Stub Adapters•Relocate TPS
1-2 $3,295.00 Yoke Change or Stub Shaft Adapter
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-5010 Gleaner Stripper Head 6000 case
All Years5088 - 9250
72"
6 Spline
•Adapter Plate •Change Yoke
Remove all Gleaner components from feeder house & bolt in adapter -
you will also have a bolt on yoke, hyd block, & hose needed for conversion
2-3 $2,495.00 Yoke Change Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-5069 Gleaner Stripper Head 6000 case
All Years1440 / 1460 / 1470 /
1480 / 14821640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 / 2588
72"
6 Spline•Adapter Plate
Remove all Gleaner components from
feederhouse & bolt in Bish adapter + 700-0009
3-4 $2,495.00 Yoke Change Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-9250IH Gleaner
Dyna-Flex Draper 9250 case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 / 9250
85"
6 Spline
•Adapter Plate •Change Yoke
Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,995.00
- 2018Yoke Change
6 Spline
2018 -Not Typically Necessary
Not Typically Necessary
992-LAN2P5065-5AFC
HD0IH8S-31A-000$3820 Not Typically
Necessary
700-9250IH Gleaner
Dyna-Flex Draper 9250 Case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Adapter Plate •Change Yoke
Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,995.00
- 2018Yoke Change
6 Spline
2018 -Not Typically Necessary
Not Typically Necessary
992-LAN2P5065-5AFC
HD0IH8S-31A-000$3820 Not Typically
Necessary
700-0048 Massey Corn Head Case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 / 2366 / 2388 / 2577 /
2588
70"
1-1/8" Hex
•Adapter Plate •Convert to TPS
•Cut top shat
• Install TPS1-2 $1,795 Please Inquire Please Inquire Not Typically
NecessaryNot Typically Necessary
Not Typically Necessary
700-9250IH Massey
Dyna-Flex Draper 9250 Case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 / 9250
85"
6 Spline
•Adapter Plate •Change Yoke
Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,995
- 2018Yoke Change
6 Spline
2018 -Not Typically Necessary
Not Typically Necessary
992-LAN2P5065-5AFC
HD0IH8S-31A-000$3820 Not Typically
Necessary
PART # Header Manufacturer TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-9250IH Massey
Dyna-Flex Draper 9250 Case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Adapter Plate •Change Yoke
Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,995
- 2018Yoke Change
6 Spline
2018 -Not Typically Necessary
Not Typically Necessary
992-LAN2P5065-5AFC
HD0IH8S-31A-000$3820 Not Typically
Necessary
700-0090 CAT Lexion Corn Head Case
2388 / 2577 (2003 +) Level Land and Field
Tracker
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2388
70"
1-1/8" Hex
•Adapter Plate •Relocate TPS Shafts ( No kit
available )1-2 $1,795.00 Yoke Change or
Stub Shaft AdapterNot Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-0060-9 challenger Corn Head Case
2388 / 2577 (2003 +) Level Land and Field
Tracker
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2389
70"
1-1/8" HexHA-60 + HA-09 1 $2,695.00 Yoke Change or
Stub Shaft AdapterNot Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-1359 Shelbourne Stripper HeadXCV- All Models
CVS- All ModelsCase
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240 / 7250 / 8250 / 9250
85"
6 Spline
•Adapter Plate •Change Yolk
Remove factory plate & bolt in Bish adapter along with
electrical2 $2,495.00 Yoke Change Not Typically
NecessaryNot Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-1359 Shelbourne Stripper HeadXCV- All Models
CVS- All ModelsCase
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140 / 5150 / 6150 / 7150
72"
6 Spline
•Adapter Plate •Change Yolk
Remove factory plate & bolt in Bish adapter along with
electrical2 $2,495 Yoke Change Not Typically
NecessaryNot Typically Necessary
Custom Build
Please Call
Not Typically Necessary
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
Part # Item Price
Including Shafts
500-0100
IHC 843, 844, 853, 943, 944, 953, 1043, 1044 Field Tracker Field Tracker Conversion - Single Drive
$850.00 30" TPS
500-0102
IHC 854, 863, 864, 883, 963, 1063 Field Tracker Field Tracker Conversion - Double Drive
$1650.00 30" TPS
500-0103
IHC 854, 863, 954, 963, 1063, 1054 Field Tracker Field Tracker Conversion - Double Drive
$1650.00 30" TPS
500-0106
IHC 954, 963, 1063, 1054 Field Tracker Field Tracker Conversion - Single Drive - End Panel Kit
$850.00 30" TPS
500-0108
IHC 964, 984, 1064, 1084 Field Tracker Field Tracker Conversion - Double Drive
$1750.00 30" TPS
500-0110
IHC 983, 1083 Field Tracker Field Tracker Conversion - Double Drive (Current Model)
$1750.00 30" TPS
500-0112
IHC 983, 1083 Field Tracker Field Tracker Conversion - Double Drive (Prior Model)
$1750.00 30" TPS
500-0114
IHC 983, 1083 Field Tracker Field Tracker Conversion 40" shafts – Double Drive
$1750.00 30" TPS
Prices listed are subject to change without no�ce. Contact Bish Enterprises for Current Pricing. Prices shown are list price and do not reflect any promo�onal, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing informa�on.
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
Part # Item Price
Complete Telescoping Power Shafts (Complete Male and Female Shaft with Yoke)
14 Series Single T.P.S ( 18" - 31") $450.00 14 Series Single T.P.S. (18" - 31") - Half Shaft $265.00 14 Series Single T.P.S ( 31" - 60") $450.00 14 Series Single T.P.S ( 31" - 60") - Half Shaft $250.00 35 Series Single T.P.S ( 27" - 31") $500.00 35 Series Single T.P.S ( 18" - 31") - Half Shaft $275.00 35 Series Single T.P.S ( 31" - 40") $500.00 35 Series Single T.P.S ( 31" - 40") - Half Shaft $300.00 35 Series Single T.P.S ( 41" - 60") $550.00 35 Series Single T.P.S ( 41" - 60") - Half Shaft $300.00 44 Series Single T.P.S ( 41" - 60") - Square $950.00 44 Series Single T.P.S ( 41" - 60") - Spline $950.00 AW36 Lengthen Drive Shaft No Yoke $250.00 AW36 Lengthen Drive Shaft 6 Spline Yoke $500.00 AW36 Complete Half Shaft (Male) $600.00 John Deere® Contour Master Shafts $550.00 John Deere® Contour Master Shafts (Refurbished) $350.00
Case® Drive-line for 700-0270 & 700-0375 Kit (AW36
Complete Half Shaft (Male)) $600.00
Yokes & Cross Kits 506-200-1400 14 Series Cross Kit $35.00
14 Series Replacement Yoke $75.00 506-200-3500 35 Series Cross Kit $40.00
35 Series Replacement Yoke $85.00 506-200-4400 44 Series Cross Kit $75.00
44 Series Yoke $150.00 506-200-7676 AW-35 Cross Kit $37.50
Prices listed are subject to change without no�ce. Contact Bish Enterprises for Current Pricing. Prices shown are list price and do not reflect any promo�onal, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing informa�on.
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
AW-35 Yoke $85.00 506-201-7989 AW-36 Cross Kit $85.00
AW-36 Yoke $90.00 Part # Item Price
Stub Adapter
507-1001 1-1/2" Hex Female x 1-1/4" Hex Male $125.00
507-1007 1-1/4" Hex Female x 1-1/4" Hex Male $125.00
507-1010 1-1/4" Hex Female x 1-1/8" Hex Male $125.00
507-1013 1-1/8" Hex Female to 1-3/8" 6 Spline Male $125.00
507-1016 1-1/8" Hex Female x 1-1/4" Hex Male $125.00
507-1019 1-1/8" Hex Female x 1-3/8" 21 Spline Male $125.00
507-1025 1-3/8" 21 Spline Female x 1-1/4" Hex Male $125.00
507-1028 1-3/8" 21 Spline Female x 1-1/8" Hex Male $125.00
507-1031 1-3/8" 21 Spline Female x 6 Spline Male $125.00
507-1034 1-3/8" 21 Spline QT Female x 1-1/8" Hex Male $125.00
507-1037 1-3/8" 6 Spline Female x 1-1/8" Hex Male $125.00
507-1040 1-3/8" 6 Spline Female x 1-3/8" 21 Spline Male $125.00
Part # Item Price
Repositioning Adapters 507-1101 1-1/8" Hex x 10" $125.00
507-1104 1-1/8" Hex x 4" $125.00
507-1107 1-3/8" 21 Spline x 3 1/2" Turned $125.00
507-1110 1-3/8" 21 Spline x 4" $125.00
507-1113 1-3/8" 6 Spline x 3 1/2" Turned $125.00
507-1116 1-3/8" 6 Spline x 4" $125.00
507-1119 4 Bolt Round Hub $125.00
507-1122 Tapered Hub $125.00
Part # Item Price
Couplers 507-1201 1" Hex Coupler (with Set Screws) $65.00
507-1204 1-1/8 Hex Coupler (with Set Screws) $65.00
507-1207 1-1/4 Hex Coupler (with Set Screws) $85.00
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
507-1210 1-3/8 Hex Coupler (with Set Screws) $95.00
507-1213 1-1/2 Hex Coupler (with Set Screws) $100.00
507-1216 Pipe Sleeve for 1-1/4" Shaft (Weld On) $30.00
Part # Item Price
Short Hex Shafts Threaded 1" Hex Shafting (Per foot) 3+ ft. $18.00
Threaded 1-1/8" Hex Shafting (Per foot) 3+ ft. $18.75
Threaded 1-1/4" Hex Shafting (Per foot) 3+ ft. $21.00
Threaded 1-1/2" Hex Shafting (Per foot) 3+ ft. $25.00
503-4001 6-1/4" Hex Shaft - Non-Threaded (Bolt-on Collar) $65.00
503-4005 8-3/4" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4002 8" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00
503-4004 8" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4006 10" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4003 10" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00
503-4009 18" Hex Shaft - Threaded (with Lock Collar) $125.00
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
Part # Item Price
992-LAN166915 Dark or light blue coupler for reel aft or reel fore function For John Deere® Header $96.60
992-LAN166916 Red coupler for reel drive function For John Deere® Header $111.55
992-LAN166917 Yellow coupler for reel return function For John Deere® Header $111.55
992-LAN166918 Green coupler for reel lift function For John Deere® Header $111.55
992-LAN166987 1/2" coupler O-ring seal repair kit For John Deere® Header $17.25
992-LAN166988 3/8" coupler O-ring seal repair kit For John Deere® Header $17.25
992-LAN166990 Single point coupler block with no couplers For John Deere® Header $251.85
992-LAN166991 Complete single point block (all functions) For John Deere® Header $714.15
992-LAN166992 Single point block with reel fore function only For John Deere® Header $392.15
992-LAN166993 Single point block with reel fore and reel aft functions For John Deere® Header $410.55
992-LAN166994 Single point block with reel drive and reel return functions For John Deere® Header $424.35
992-LAN166995 Single point block with reel drive, reel return, and reel lift For John Deere® Header $543.95
992-LAN166996 Single point block with reel drive function only For John Deere® Header $358.80
992-LAN166997 Single point block with reel fore, reel aft, reel drive, and reel return For John Deere® Header $649.75
992-LAN166998 Single point coupler with reel lift function only For John Deere® Header $361.10
992-LAN204828BLKS Coupler block storage bracket with hardware For John Deere® Header $67.85
992-LAN204828S Coupler block storage bracket with hardware For John Deere® Header $58.65
992-LAN2P5065-2AFC
Single point coupler block For CNH® corn headers $230.00
992-LAN2P5065-5AFC
Single point coupler block CNH® platforms $385.25
Part # Item Price
Prices listed are subject to change without no�ce. Contact Bish Enterprises for Current Pricing. Prices shown are list price and do not reflect any promo�onal, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing informa�on.
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
992-LAN3P5065-5GMC
Single point coupler block for the combine side of CNH® headers For John Deere® Header $414.00
992-LAN84207 Single point hydraulic kit For John Deere® 50 Series STS combines $1,891.75
992-LAN84208 Single point hydraulic kit For John Deere® 50 Series Walker combines $1,891.75
992-LAN84209 Single point hydraulic kit For John Deere® 50 Series Walker combines $1,891.75
992-LAN84209NE Single point hydraulic kit For John Deere® 9X00 and 9X10 Series combines $1,788.25
992-LANAH225671 Combine side single point hydraulic large valve replacement For John Deere® Combine $241.50
992-LANAXE21789 Combine side single point hydraulic small valve replacement For John Deere® Combine $208.15