508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - email@bishcom.com Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.

• Highest Quality Adapters on the Market, with Complete Solutions Available! • Large Knowledge Base, We’ve Been Building Adapters Since 1976!

• Improve your Performance in Some Situations. • Quality Conversions, Both Functionally and Cosmetically.

John Deere Header Adapters:

Complete Solutions o We Stock the Adapter(s), Upright Kit(s), Telescoping Power Shaft(s), and Electrical Conversion(s)

John Deere® Headers can be Adapted to Fit Almost Any Combine! o We Offer a Frame Kit for John Deere® Headers to work with:

Case IH® Cat Challenger® Cat® / Claas® / Lexion® Gleaner® New Holland®

Massey Ferguson® Oxbo® New Models Being Researched Others Can Be Custom Built

John Deere® Combines can be Adapted to Fit Almost Any Header! o We Offer Kits for John Deere® Combines to:

Case IH® Cat® / Claas® / Lexion® Gleaner® Honey Bee®

New Holland® Massey Ferguson® New Models Being Researched Others Can Be Custom Built

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

700-0004-C john deere

Corn HeadRow Head All Oliver

7600 / 7800 / 8800 / 8900 / 9700

•Adapter Plate•Convert to TPS

NONE 1-2 $1,250 Please Call To Inquire Double Drive

$600

Custom Build

Please Call

700-0004-C john deere

Corn HeadRow Head All White White Axial 9720

80"

1-1/4" Hex

•Adapter Plate•Convert to TPS

NONE 1-2 $1,250

19" Female 1-1/4" Hex 14 Series

31" Male 1-1/8" or 1-1/4" Hex 14

Series

Double Drive$600

Custom Build

Please Call

700-0004-C john deere

Corn HeadRow Head All Massey

Red Feederhouse

Rotary - 8560 / 8570 / 8590 / 8780

80"

1-1/4" Hex

•Adapter Plate•Convert to TPS

If equiped with Smart-Trac, Refer to kit 700-0011-ST 1-2 $1,250

19" Female 1-1/4" Hex 14 Series

31" Male 1-1/8" or 1-1/4" Hex 14

Series

Double Drive$600

Custom Build

Please Call

700-0004-P john deere Cutter BarPlatform

All White White Axial 972080"

1-1/4" Hex

•Adapter Plate•Convert to TPS

NONE 1-2 $1,500

19" Female 1-1/4" Hex 14 Series

31" Male 1-1/8" or 1-1/4" Hex 14

Series

Double Drive$600

Custom Build

Please Call

700-0004-P john deere Cutter BarPlatform

All Massey

Red Feederhouse

Rotary - 8560 / 8570 / 8590 / 8780

80"

1-1/4" Hex

•Adapter Plate•Convert to TPS

If equiped with Smart-Trac, Refer to kit 700-0011-ST 1-2 $1,500

19" Female 1-1/4" Hex 14 Series

31" Male 1-1/8" or 1-1/4" Hex 14

Series

Double Drive$600

Custom Build

Please Call

700-0006 john deere

Corn HeadRow HeadCutter BarPlatform

All New HollandTR - 70 / 75 / 76 / 85 / 86 / 87 / 88 / 89 / 96 /

97 / 98 / 99

72"

6 Spline

•Adapter Plate•Convert to TPS

NONE 1-2 $1,250

19" Female 6 Spline 14 / 35

Series

31" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series

Double Drive$600

Custom Build

Please Call

700-0007-N john deere Corn Head40 or 90 Series

8r 30" and Smaller

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 /

9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 5088 - 5130-6130

Models4-6 $1,375

1x 19" Female 6 Spline 14 Series

1x 28.75" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0007-N john deere Corn Head40 or 90 Series

8r 30" and Smaller

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 5088 - 5130-6130

Models4-6 $1,375

1x 19" Female 6 Spline 14 Series

1x 28.75" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-N john deere Corn Head40 or 90 Series

8r 30" and Smaller

New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 Spline

Shaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 4-6 $1,375

1x 19" Female 6 Spline 14 Series

1x 28.75" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

Custom Build

Please Call

Lights Only$500

700-0007-N john deere Corn Head40 or 90 Series

8r 30" and Smaller

New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 Spline

Shaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 4-6 $1,375

1x 19" Female 6 Spline 14 Series

1x 28.75" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

Custom Build

Please Call

Lights Only$500

700-0007-W john deere Corn Head40 or 90 Series

12r 20" and Larger

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•Add Stripper Extensions For Xx88 - 5130-6130

Models6-8 $1,995

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-W john deere Corn Head40 or 90 Series

12r 20" and Larger

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

Add Stripper Extensions For Xx88 - 5130-6130

Models6-8 $1,995

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-W john deere Corn Head40 or 90 Series

12r 20" and Larger

New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 Spline

Shaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 6-8 $1,995

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

Custom Build

Please Call

Lights Only$500

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0007-W john deere Corn Head40 or 90 Series

12r 20" and Larger

New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 Spline

Shaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 6-8 $1,995

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

Custom Build

Please Call

Lights Only$500

700-0007-P-IH john deere Platform 200 or 900 Series

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 4-6 $1,675

1x 19" Female 6 Spline 14 Series

1x 28" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

900F series$250

200 Series$900

700-0007-P-IH john deere Platform 200 or 900 Series

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 4-6 $1,675

1x 19" Female 6 Spline 14 Series

1x 28" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

900F series$250

200 Series$900

700-0007-P-NH john deere Platform 200 or 900 Series New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 4-6 $1,675

1x 19" Female 6 Spline 14 Series

1x 28" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

$2810

Lights Only$500

700-0007-P-NH john deere Platform 200 or 900 Series New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

Add Stripper Extensions For 20-40-60 Models 4-6 $3,695

1x 19" Female 6 Spline 14 Series

1x 28" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

$2810

Lights Only$500

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0007-6C-IH-E john deere

Corn Head

600 SERIES

Serial # -745100

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•5088-6230 Need To Add Stripper Extensions

6-8 $3,695

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Double Drive$650

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-6C-IH-E john deere Corn Head

600 SERIES

Serial # -745100

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•5088-6230 Need To Add Stripper Extensions

6-9 $3,695

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Double Drive$650

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-6C-IH-L john deere Corn Head

600 SERIES

Serial #745101 -

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•5088-6230 Need To Add Stripper Extensions

6-8 $3,695

Not Typically Necessary

Yoke ChangeAW36 6 Spline

Not Typically Necessary

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-6C-IH-L john deere Corn Head

600 SERIES

Serial # 745101 -

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•5088-6230 Need To Add Stripper Extensions

6-8 $3,695

Not Typically Necessary

Yoke ChangeAW36 6 Spline

Not Typically Necessary

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-6C-NH-E john deere Corn Head

600 SERIES

Serial # -745100

New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•20-40-60 Models Add Stripper Extensions

6-8 $3,695

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Double Drive$650

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$2810

Lights Only$500

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0007-6C-NH-E john deere

Corn Head

600 SERIES

Serial # -745100

New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•20-40-60 Models Add Stripper Extensions

6-8 $3,695

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Double Drive$650

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$2810

Lights Only$500

700-0007-6C-NH-L john deere Corn Head

600 SERIES

Serial # 745101 -

New Holland

2013 - CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS4•" Wedge Kit

On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide20-40-60 Models Add Stripper Extensions

6-8 $3,695

Not Typically Necessary

Yoke ChangeAW36 6 Spline

Shaved

Not Typically Necessary

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$2810

Lights Only$500

700-0007-6C-NH-L john deere Corn Head

600 SERIES

Serial #745101 -

New Holland

2013 - CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•20-40-60 Models Add Stripper Extensions

6-8 $3,695

Not Typically Necessary

Yoke ChangeAW36 6 Spline

Shaved

Not Typically Necessary

Replacement Feederhouse

Guides$250

Stripper Extentions$100

Hydraulic Block$300

$2810

Lights Only$500

700-0007-6P-IH-4-30 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-IH-4-30 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-IH-4-35 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline Not Typically Necessary

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0007-6P-IH-4-35 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline Not Typically Necessary

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-2-30 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-2-30 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-2-35 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline ShavedNot Typically Necessary

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0007-6P-NH-2-35 john deere

HyrdaflexPlatform

RigidPlatform

601 SERIES

35 Ft or more New Holland

- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 881

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-9 $3,951 Yoke Change

6 Spline ShavedNot Typically Necessary

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-4-30 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less New Holland

2013 -CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-4-30 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less New Holland

2013 - CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-4-35 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more New Holland

2013 -CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

85"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline ShavedNot Typically Necessary

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-NH-4-35 john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more New Holland

2013 -CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /

6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 /

8080 / 8090 / 820 / 840 / 860 / 880

74"(Must Specify)

6 SplineShaved

•Cut & Weld Kit•Relocate TPS•4" Wedge Kit

•5088-6230 Need To Add Stripper Extensions

•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline ShavedNot Typically Necessary

Stripper Extentions$100

Hydraulic Block$350

$2810

Lights Only$500

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0008-N john deere

Corn HeadRow Head 40 or 90 Series lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,450

1x 28" Female 21 Spline PB Shaved 35 Series On Left

Side

1x 28" Female 21 Spline AL 35

Series On Right Side

2x Male 1-1/8" or 1-1/4" Hex 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

700-0008-N john deere

Corn HeadRow Head 40 or 90 Series lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,450

1x 28" Female 21 Spline PB Shaved 35 Series On Left

Side

1x 28" Female 21 Spline AL 35

Series On Right Side

2x Male 1-1/8" or 1-1/4" Hex 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

700-0008-W john deere

Corn HeadRow Head 90 Series lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,450

1x 28" Female 21 Spline PB Shaved 35 Series On Left

Side

1x 28" Female 21 Spline AL 35

Series On Right Side

2x Male 1-1/8" or 1-1/4" Hex 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

700-0008-W john deere

Corn HeadRow Head 90 Series lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,450

1x 28" Female 21 Spline PB Shaved 35 Series On Left

Side

1x 28" Female 21 Spline AL 35

Series On Right Side

2x Male 1-1/8" or 1-1/4" Hex 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0008-9P john deere Cutter BarPlatform

200 / 900 Series

lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

1x 28" Female 21 Spline PB Shaved 35 Series On Left

Side

1x 28" Female 21 Spline AL 35

Series On Right Side

2x Male 1-1/8" or 1-1/4" Hex 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

Platform$6,996

With Hydraulics

700-0008-9P john deere Cutter BarPlatform

200 / 900 Series

lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

1x 28" Female 21 Spline PB Shaved 35 Series On Left

Side

1x 28" Female 21 Spline AL 35

Series On Right Side

2x Male 1-1/8" or 1-1/4" Hex 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

Platform$6,996

With Hydraulics

700-0008-6-E john deere

Corn Head

600 Series

Serial # -745100

lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

700-0008-6-E john deere

Corn Head

600 Series

Serial # -745100

lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

700-0008-6-L john deere

Corn Head600 Series

Serial # 745101-

lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

Yoke Change

21 Spline Shaved PB on Left

21 Spline AL on Right

Not Typically Necessary

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

700-0008-6-L john deere

Corn Head600 Series

Serial # 745101-

lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

Yoke Change

21 Spline Shaved PB on Left

21 Spline AL on Right

Not Typically Necessary

Hydraulic Block$3,750

CH / RC$2,035

No Hydraulics$5,550

With Hydraulics

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0008-6P-30 john deere

Platform

30 Ft or less

600 Series

Serial # -745100745101-

lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$300 Hydraulic Block

$3,750Platform$6,996

With Hydraulics

700-0008-6P-30 john deere

Platform

30 Ft or less

600 Series

Serial # -745100745101-

lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

28" Female 6 Spline 35 Series

31" Male 1-1/8" Hex Male 35

Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$300 Hydraulic Block

$3,750Platform$6,996

With Hydraulics

700-0008-6P-35 john deere

Platform

35 Ft or more

600 Series

Serial # -745100745101-

lexion

All Years

405-780

Wide Body

80"21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

Yoke Change

21 Spline Shaved PB on Left

21 Spline AL on Right

Not Typically Necessary

Hydraulic Block$3,750

Platform$6,996

With Hydraulics

700-0008-6P-35 john deere

Platform

35 Ft or more

600 Series

Serial # -745100745101-

lexion

All Years

405-780

Narrow Body

70" 21 SplineShaved

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

None 7-10 $3,950

Yoke Change

21 Spline Shaved PB on Left

21 Spline AL on Right

Not Typically Necessary

Hydraulic Block$3,750

Platform$6,996

With Hydraulics

700-0009 john deere

Corn HeadRow Head All case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate•Convert to TPS

Cut Backshafts, Install Bearing Kit For Tps (Slip

Clutch Add-On - Cutterbars + $85 Per Side)

3 $1,250

19" Female 1-1/8" Hex 14 / 35 Series

30.38" Male 1-1/8" Hex 14 / 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$300

$1815

Lights Only$175

700-0009-P john deere

Cutter BarPlatform All case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate•Convert to TPS

•Install Slip Clutch

Cut Backshafts, Install Bearing Kit For Tps (Slip

Clutch Add-On - Cutterbars + $85 Per Side)

3 $1,250

19" Female 1-1/8" Hex 14 / 35 Series

30.38" Male 1-1/8" Hex 14 / 35 Series

Single Drive:$300

Double Drive$600

$100 Slip Clutch Repo

Hydraulic Block$350

Multiple Options

700-0009-P-35 john deere

Cutter BarPlatform

35 Ft or more

All case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate•Convert to TPS

•Install Slip Clutch

Cut Backshafts, Install Bearing Kit For Tps (Slip

Clutch Add-On - Cutterbars + $85 Per Side)

3 $1,250 Yoke Change1-1/8" Hex

Not Typically Necessary

$100 Slip Clutch Repo

Hydraulic Block$350

Multiple Options

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0009-6D john deere Ridgid Draper 600 Series case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate•Shaft Change

Cut Backshafts, Install Bearing Kit For Tps (Slip

Clutch Add-On - Cutterbars + $85 Per Side)

3 $1,500

19" Female 1-1/8" Hex 14 / 35 Series

30.38" Male 1-1/8" Hex 14 / 35 Series

Single DriveShaft Only

$100 Slip Clutch Repo

Hydraulic Block$350

Custom Build

Please Call

Lights Only$175

700-0011-C john deere

Corn HeadRow HeadCutter BarPlatform

All gleaner

R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6

/ R7

70"

21 Spline

•Adapter Plate•Convert to TPS

• Centers Head with Wheels •Must Be Level

Land Feederhouse.

• If equiped with Smart-Trac, Refer to kit 700-0011-

ST

3 $1,725

28" Female 21 Spline 14 / 35 Series on Left

31" Male 1-1/8" or 1/1/4 Hex 14 / 35

Series on Left

19" Female 21 Spline 14 / 35

Series on Right

21" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series on Right

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0011-O john deere

Corn HeadRow HeadCutter BarPlatform

All gleaner

R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6

/ R7

70"

21 Spline

•Adapter Plate•Convert to TPS

• Centers Head with Feederhouse

• If equiped with Smart-Trac, Refer to kit 700-0011-

ST

1-2 $1,725

28" Female 21 Spline 14 / 35 Series on Left

31" Male 1-1/8" or 1/1/4 Hex 14 / 35

Series on Left

19" Female 21 Spline 14 / 35

Series on Right

21" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series on Right

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0120 john deere

Corn HeadRow HeadCutter BarPlatform

All gleaner

Black Feederhouse

A65 / A66 / A75 / A76 / A85 / A86 / C62

90"

21 Spline

•Adapter Plate•Convert to TPS

For Level Land Only. If equiped with Smart-Trac,

Head needs to be modified.

1-2 $1,500

19" Female 21 Spline 14 Series

25.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0120 john deere

Corn HeadRow HeadCutter BarPlatform

All Massey

Black Feederhouse 9520 / 9530 / 9540 / 9545 / 9550 / 9560 / 9565 - Conventional 9690 / 9695 / 9720 / 9790 / 9795 / 9895

90"

21 Spline

•Adapter Plate•Convert to TPS

For Level Land Only. If equiped with Smart-Trac,

Head needs to be modified.

1-2 $1,500

19" Female 21 Spline 14 Series

25.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0120 john deere

Corn HeadRow HeadCutter BarPlatform

All challanger

520C / 540C / 550C / 560C / 540E / 660 / 660B / 670 / 670B /

680B

90" •Adapter Plate•Convert to TPS

For Level Land Only. If equiped with Smart-Trac,

Head needs to be modified.

1-2 $1,500

19" Female 21 Spline 14 Series

25.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0011ST john deere

Corn HeadRow HeadCutter BarPlatform

All Massey

Red Feederhouse

Rotary - 8780 / 8780XP

90"

1-1/4" Hex

•Relocate Top Toolbar

•Wedge

If equiped with Smart-Trac, Head needs to be

modified.30 $6,500

Including Labor

19" Female 1-1/4" Hex 14 Series

21" Male 1-1/8" or 1-1/4" Hex 14

Series

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0011ST john deere

Corn HeadRow HeadCutter BarPlatform

All gleaner

A Series - A65 / A66 / A75 / A76 / A85 / A86 /

C62

90"

21 Spline

•Relocate Top Toolbar

•Wedge

If equiped with Smart-Trac, Head needs to be

modified.30 $6,500

Including Labor

19" Female 21 Spline 14 Series

21" Male 1-1/8" or 1-1/4" Hex 14

Series

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0011ST john deere

Corn HeadRow HeadCutter BarPlatform

All gleaner

S Series - S67 / S68 / S77 / S78 / S87 / S88 /

S96 / S97 / S98

90"

21 Spline

•Relocate Top Toolbar

•Wedge

If equiped with Smart-Trac, Head needs to be

modified.30 $6,500

Including Labor

1x 28 Female 21 Spline 14 Series

on Left

1x 31" Male 1-1/8" or 1-1/4" Hex 14 Series on Right

1x 19" Female 21 Spline 14 Series

on Right

1x 21" Male 1-1/8" or 1-1/4" Hex on

Right

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0011ST john deere

Corn HeadRow HeadCutter BarPlatform

All challanger

A Series - A65 / A66 / A75 / A76 / A85 / A86 /

C6290"

21 Spline

•Relocate Top Toolbar

•Wedge

If equiped with Smart-Trac, Head needs to be

modified.31 $6,500

Including Labor

19" Female 21 Spline 14 Series

21" Male 1-1/8" or 1-1/4" Hex 14

Series

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0014 john deere

Corn HeadRow Head All gleaner L M L2 M2 L3 M3

72"

21 Spline

•Adapter Plate•Convert to TPS

If equiped with Smart-Trac, Head needs to be

modified.3 $1,750

19" Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Left Side

28.63 Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Right Side

Single Drive:$300

Double Drive$600

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0014-P john deere

Cutter BarPlatform All gleaner L M L2 M2 L3 M3

72"

21 Spline

•Adapter Plate•Convert to TPS

If equiped with Smart-Trac, Head needs to be

modified.2-5 $1,750

19" Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Left Side

28.63 Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Right Side

Single Drive:$300

Double Drive$600

Hydraulic Pump For Platform

Available Through Gleaner

Custom Build

Please Call

Lights Only$175

700-0016 john deere

Corn HeadRow Head All gleaner

GLEANER K / E(Level-land Only)

•Adapter Plate May Need Right Hand Drive Sprocket 1-2 $1,595 Not Typically

NecessaryNot Typically Necessary

RH Drive Sprocet / Hub$55

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0017 john deere

Corn HeadRow Head All gleaner

GLEANER F F2 F3(Level-land Only)

•Adapter Plate•Chain Drive

Late F2 May Need Upper Feederhouse Brackets

And Latch Bar (Get From Gleaner Dealer)

1-2 $1,595 Not Typically Necessary

Not Typically Necessary

Hydraulic Blocks Available Through

Agco Dealer

Custom Build

Please Call

Lights Only$175

700-0024 john deere

Corn HeadRow Head All oxbo BYRON

80"

21 Spline

•Adapter Plate•Convert to TPS

None 1-2 $1,785

28" Female 21 Spline 35 Series

31" Male 1-1/8" or 1-1/4" Hex 35

Series

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0025 john deere

Corn HeadRow Head All oxbo PIXAL

80"

21 Spline

•Adapter Plate•Convert to TPS

None 1-2 $1,785

28" Female 21 Spline 35 Series

31" Male 1-1/8" or 1-1/4" Hex 35

Series

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0027-LL Case IH

Cornheads Only

800 - 900 - 1000 Series

OnlyJohn Deere

All Years4400 - 9650Level Land

Feederhouses

83.69"

21 Spline(Must Specify)

•Bolt in pieces •Remove Feederhouse Chain Cover 2-4

$1,75019" Female 21

Spline 14 Series

21" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0027-CM Case IH

Cornheads Only

800 - 900 - 1000 Series

OnlyJohn Deere

All Years9600 - S Series Contour Master Feederhouses

83.69"

21 Spline(Must Specify)

•Bolt in pieces •Remove Feederhouse Chain Cover 2-4

$1,75019" Female 21

Spline 14 Series

21" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

700-0270 Case IH

Cornheads Only

22 - 3400 Series

John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land or Contour

Master Feederhouses

83.69"

21 Spline(Must Specify)

•Requires Hooks on Feederhouse

•Bolt in pieces

•Move or Remove Gearbox, Install Bearing Holder & Change TPS

•New Backshafts Can Be Provided @ an Additional

Cost

2-4$1,995

2x 27-31" Male 1-1/4

Hex Shafts

Single Drive:$300

Double Drive$600

Hydraulic Block

Custom Build

Please Call

Lights Only$175

700-0271 Case IH

Chopping Cornheads

Only

Case 2600 & 4400 Series

John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land or Contour

Master Feederhouses

83.69"

21 Spline(Must Specify)

•Requires Hooks on Feederhouse

•Bolt in pieces

•Verify Backshaft Diameter: 1-1/8" Hex or

30mm are options

•Stub shafts are best option if customer will

approve

3-5$1,995 Already has long

drive shafts, just needs yoke changes.

Already has long drive shafts, just

needs yoke changes.

John Deere Hydraulic Block

Storage Bracket

Stub Shaft

Yoke Change

Custom Build

Please Call

Lights Only$175

700-0270 New Holland

Corn Heads Only 98C John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land or Contour

Master Feederhouses

83.69"

21 Spline(Must Specify)

•Has to have hooks on

feederhouse

•Relocate TPS

•Move or remove gearbox, •Install bearing holder &

change TPS (New backshafts can be

provided at additional cost)

3-5$1,995

2x 27-31" Male 1-1/4

Hex Shafts

Single Drive:$300

Double Drive$600

Hydraulic Block$3,750

Custom Build

Please Call

Lights Only$175

700-0271 New Holland

Cornheads Only 99C & 980CR John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land or Contour

Master Feederhouses

83.69"

21 Spline(Must Specify)

•Adapter Plate •Change TPS

•Verify Backshaft Diameter: 1-1/8" Hex or

30mm are options

•Stub shafts are best option if customer will

approve

3-5$1,995

2x 27-31" Male 1-1/4

Hex Shafts

Single Drive:$300

Double Drive$600

Hydraulic Block$450

Not Available

Lights Only$175

700-0060 Gleaner Corn Head 3000 Series John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land

83.69"

21 Spline(Must Specify)

•Adapter Plate •Convert to TPS

Remove all Gleaner componets from

feederhouse & bolt in John Deere adapter

2-3$1,250 Not Provided From

Bish EnterprisesNot Provided From Bish Enterprises

Hydraulic Block $450

Custom Build

Please Call

Lights Only$175

700-0060 Massey Corn Head 3000 Series John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land

83.69"

21 Spline(Must Specify)

•Adapter Plate •Convert to TPS

Remove all Gleaner componets from

feederhouse & bolt in John Deere adapter

2-3$1,250 Not Provided From

Bish EnterprisesNot Provided From Bish Enterprises

Hydraulic Block $450

Custom Build

Please Call

Lights Only$175

700-0060 Challanger Corn Head 3000 Series John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land

83.69"

21 Spline(Must Specify)

•Adapter Plate •Convert to TPS

Remove all Gleaner componets from

feederhouse & bolt in John Deere adapter

2-3$1,250 Not Provided From

Bish EnterprisesNot Provided From Bish Enterprises

Hydraulic Block $450

Custom Build

Please Call

Lights Only$175

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length /

Shaft Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

750-5060 Gleaner Stripper Head 6000 John Deere

4400 - S680 Level Land or Contour

Master

83.69"

21 Spline(Must Specify)

•Adapter Plate

Remove all Gleaner componets from feeder house & bolt in adapter -

you will also have a bolt on yoke, hyd block, & hose needed for conversion

2-3 $3,105 Yoke Change

21 Spline

Typically Not Necesarry

Yoke Changes

Hydraulic Block$450

Custom Build

Please Call

Lights Only$175

700-9250-JD50/60 Gleaner

Dyna-Flex Draper 9250 John Deere

Serial # 720301 - - 720300

4400 - 9860 Level Land or Contour

Master

83.69"

21 Spline(Must Specify)

•Adapter Plate •Change Yoke

60 Series combines: We need to ask if the combine

has a metal or plastic shroud

5-6 $3,500 Typically Not Necesarry

Typically Not Necesarry

Single Yoke Change

Electrical Kit Needed

Hydraulic Block $450

$2830

700-9250JD Gleaner

Dyna-Flex Draper 9250 John Deere

4400 - 9860 Level Land or Contour

Master

83.69"

21 Spline(Must Specify)

•Adapter Plate •Change Yoke

60 Series combines: We need to ask if the combine

has a metal or plastic shroud

5-6$3,500 Typically Not

NecesarryTypically Not Necesarry

Single Yoke Change

Electrical Kit Needed

Hydraulic Block $450

$2830

700-0046 Massey Corn Head John Deere

4400-9650 Level Land FH Only

83.69"

21 Spline(Must Specify)

•Adapter Plate •Convert to TPS

•Cut hooks off head

•Weld adapter to FH opening in head

3-5 $1,295 Please Call To Inquire

Please Call To Inquire

Hydraulic Block $450

Custom Build

Please Call

Lights Only$175

700-9250JD Massey

Dyna-Flex Draper 9250 John Deere

Serial # -720300720301 -

4400-9850 Level Land or Contour Master

83.69"

21 Spline(Must Specify)

•Adapter Plate •Change Yoke

60 series combines: We need to ask if the combine

has a metal or plastic shroud

5-6

$3,500

$3,705 for early serial #

Typically Not Necesarry

Typically Not Necesarry

Single Yoke Change

Electricl Kit Needed

Hydraulic Block $450

$2830

700-9250-JD5060 Massey

Dyna-Flex Draper 9250 John Deere

Serial # -720300720301 -

4400-9850 Level Land or Contour Master

83.69"

21 Spline(Must Specify)

•Adapter Plate •Change Yoke

61 series combines: We need to ask if the combine

has a metal or plastic shroud

5-6

$3,705

$3,705 for early serial #

Typically Not Necesarry

Typically Not Necesarry

Single Yoke Change

Electricl Kit Needed

Hydraulic Block $450

$2830

1 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61025180 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

Part # Item Price Price

Including Shafts

500-0200 John Deere 900 Series Cutterbar Upright Kit

Double Drive $600.00 $1,350.00

31" TPS

500-0204 John Deere 200 Series Cutterbar Upright Kit

Double Drive $600.00 $1,350.00

31" TPS

500-0206 John Deere 900 Series Cutterbar Upright Kit

Double Drive $600.00 $1,350.00

31" TPS

500-0208 John Deere 544, 594, 643, 693

Double Drive $600.00 $1,350.00

31" TPS

500-0210 John Deere 443, 444, 493

Double Drive $600.00 $1,350.00

31" TPS

500-0211 John Deere 443, 444, 493

Single Drive $300.00 $650.00

31" TPS

500-0212 John Deere 443, 493, 444, 494, 643, 644, 653, 653A, 654,

654A, 693, 694, 843, 853A, 893 Double Drive

$600.00 $1,350.00 31" TPS

500-0214 John Deere 844, 854, 854A, 894, 1243, 1253A, 1290, 1293

Double Drive $600.00 $1,350.00

31" TPS

500-0214-HD

John Deere 844, 854, 854A, 894, 1243, 1253A, 1290, 1293 Double Drive with Heavy Duty Drivelines

- $1,600.00 31" TPS

500-0216 John Deere 843, 893

Double Drive $600.00 $1,350.00

31" TPS

500-0218 John Deere 844, 894, 1243, 1293, 1244, 1294

Double Drive $600.00 $1,350.00

31" TPS

500-0220 John Deere 844, 894, 1243, 1293, 1244, 1294

Double Drive with Heavy Duty Drivelines $1,600.00 $1,600.00

31" TPS

2 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61025180 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

Part # Item Price Price

Including Shafts

500-0222 John Deere 600 Series Upright Kit

Single Drive $325.00 $675.00

31" TPS

500-0221 John Deere 600 Series Upright Kit

Double Drive $650.00 $1,350.00

31" TPS

500-0221 John Deere 600 Series Upright Kit

Double Drive with Heavy Duty Drivelines - $1,700.00

31" TPS

500-0221 John Deere 600 Series Upright Kit

Double Drive with Long Heavy Duty Drivelines -

$2,000.00 Long HD

TPS

1 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

Part # Item Price

Complete Telescoping Power Shafts (Complete Male and Female Shaft with Yoke)

505-XXXX 14 Series Single T.P.S ( 18" - 31") $300.00

505-XXXX 14 Series Single T.P.S ( 31" - 60") $350.00

505-XXXX 35 Series Single T.P.S ( 18" - 31") $450.00

505-XXXX 35 Series Single T.P.S ( 31" - 40") $475.00

505-XXXX 35 Series Single T.P.S ( 41" - 60") $500.00

505-XXXX 44 Series Single T.P.S ( 18" - 31") $525.00

505-XXXX 44 Series Single T.P.S ( 31" - 40") $600.00

505-XXXX 44 Series Single T.P.S ( 41" - 60") $750.00

505-XXXX AW36 Series Single T.P.S ( 31" - 40") $550.00

505-XXXX AW36 Series Single T.P.S ( 41" - 60") $750.00

505-6002 F 505-6003 M John Deere® Contour Master Shafts $400.00

505-6002-R F 505-6003-R M John Deere® Contour Master Shafts (Refurbished) $300.00

505-6010-R F 505-6011-F M OEM Case® Drive-line For Case Field Tracker (Refurbished) $600.00

505-3010 Case® Drive-line for 700-0270 & 700-0375 Kit $500.00

Yokes & Cross Kits 506-1014 14 Series Cross Kit $35.00

506-XXXX 14 Series Replacement Yoke $75.00

506-1035 35 Series Cross Kit $37.50

506-XXXX 35 Series Replacement Yoke $85.00

506-1044 44 Series Cross Kit $47.50

506-XXXX 44 Series Yoke $90.00

506-1135 AW-35 Cross Kit $37.50

506-XXXX AW-35 Yoke $85.00

506-1236 AW-36 Cross Kit $47.50

1 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

Part # Item Price

Stub Adapter

507-1001 1-1/2" Hex Female x 1-1/4" Hex Male $85.00

507-1004 1-1/2" Round Female x 1-1/8" Hex Male $85.00

507-1007 1-1/4" Hex Female x 1-1/4" Hex Male $85.00

507-1010 1-1/4" Hex Female x 1-1/8" Hex Male $85.00

507-1013 1-1/8" Hex Female to 1-3/8" 6 Spline Male $85.00

507-1016 1-1/8" Hex Female x 1-1/4" Hex Male $85.00

507-1019 1-1/8" Hex Female x 1-3/8" 21 Spline Male $85.00

507-1022 1-1/8" Hex Male x 1-1/8" Hex Male $85.00

507-1025 1-3/8" 21 Spline Female x 1-1/4" Hex Male $85.00

507-1028 1-3/8" 21 Spline Female x 1-1/8" Hex Male $85.00

507-1031 1-3/8" 21 Spline Female x 6 Spline Male $85.00

507-1034 1-3/8" 21 Spline QT Female x 1-1/8" Hex Male $85.00

507-1037 1-3/8" 6 Spline Female x 1-1/8" Hex Male $85.00

507-1040 1-3/8" 6 Spline Female x 1-3/8" 21 Spline Male $85.00

Part # Item Price

Repositioning Adapters 507-1101 1-1/8" Hex x 10" $85.00

507-1104 1-1/8" Hex x 4" $85.00

507-1107 1-3/8" 21 Spline x 3 1/2" Turned $85.00

507-1110 1-3/8" 21 Spline x 4" $85.00

507-1113 1-3/8" 6 Spline x 3 1/2" Turned $85.00

507-1116 1-3/8" 6 Spline x 4" $85.00

507-1119 4 Bolt Round Hub $85.00

507-1122 Tapered Hub $85.00

2 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

Part # Item Price

Couplers 507-1201 1" Hex Coupler (with Set Screws) $65.00

507-1204 1-1/8 Hex Coupler (with Set Screws) $65.00

507-1207 1-1/4 Hex Coupler (with Set Screws) $85.00

507-1210 1-3/8 Hex Coupler (with Set Screws) $95.00

507-1213 1-1/2 Hex Coupler (with Set Screws) $100.00

507-1216 Pipe Sleeve for 1-1/4" Shaft (Weld On) $30.00

Part # Item Price

Short Hex Shafts Threaded 1" Hex Shafting (Per foot) 3+ ft. $18.00

Threaded 1-1/8" Hex Shafting (Per foot) 3+ ft. $18.75

Threaded 1-1/4" Hex Shafting (Per foot) 3+ ft. $21.00

Threaded 1-1/2" Hex Shafting (Per foot) 3+ ft. $25.00

503-4001 6-1/4" Hex Shaft - Non-Threaded (Bolt-on Collar) $65.00

503-4005 8-3/4" Hex Shaft - Threaded (with Lock Collar) $100.00

503-4002 8" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00

503-4004 8" Hex Shaft - Threaded (with Lock Collar) $100.00

503-4006 10" Hex Shaft - Threaded (with Lock Collar) $100.00

503-4003 10" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00

503-4009 18" Hex Shaft - Threaded (with Lock Collar) $125.00

1 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

PART # Item Price

908-2001

Bish Feeder House Hooks (Converts Bump to 60 Series Hook) - Pair

John Deere 20 Series Combine (1/2" x 1-3/4" with Flange Nut)

$550.00

908-2004

Bish Feeder House Hooks (Converts Bump to 60 Series Hook) - Pair

John Deere 50 Series Combine Serial # Prior to - 686329 (M12 x 50mm)

$550.00

908-2007

Bish Feederhouse Hooks (Converts Bump to 60 Series Hook) - Pair

John Deere 50 Series Combine Serial # 686330 - Current (M16 x 60mm)

$550.00

908-LAN84212/213K

Contour-Master™ retro fit tilt frame for pre 60 Series narrow body combines $2,550.00

908-LAN84212K Contour-Master™ retro fit tilt frame for pre 60 Series wide

body combines $2,142.00

908-LAN84214-N Level land feeder house hook and deflector kit for pre 60

Series narrow body combines $525.00

908-LAN84214-W Level land feeder house hook and deflector kit for pre 60

Series wide body combines $525.00

908-LAN101050S Heavy Duty, Feeder House Lift Cylinders Kit

For John Deere® 50 Series STS combines only $2,175.00

908-LAN10107 Heavy Duty, Feeder House Lift Cylinders Kit For John Deere® 60 & 70 Series combines $2,325.00