-
F I N E S T Q U A L I T Y P R E C I S I O N G R O U N D
CARBIDE BURS
CARB-I-TOOL (AUST.) PTY. LTD.
12 Levanswell Road, Moorabbin, Victoria 3189 Australiatelephone:
+61 3 9555 2966 facsimile: +61 3 9555 8695
email: [email protected] website: www.carbitool.com.au
mailto:[email protected]://www.carbitool.com.au
-
CARBIDE BURS1/4” AND 3/8” HARDENED STEEL SHANK
2
PM 41 CYLINDRICAL SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
*1001 *1002 *1003 1004 1005 1006 1007 1009 1010 1011 *1012
3/16”1/4”
5/16”3/8”1/2”5/8”3/4”3/4”3/4”
1”1”
xxxxxxxxxxx
5/8”5/8”3/4”3/4”
1”1”
3/4”1”1”1”1”
1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”1/4”3/8”
Available with End Cut
PM 43 ROUND NOSE TREE SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
*1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012
1/4”3/8”
7/16”1/2”1/2”5/8”3/4”3/4”3/4”3/4”3/4”3/4”
xxxxxxxxxxxx
5/8”3/4”
1”3/4”
1”1”1”1”
1-1/4”1-1/4”1-1/2”1-1/2”
1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”1/4”3/8”1/4”3/8”
PM 45 POINTED CONE SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
Included Angle
*1001 *1002 *1003 1004 1005 1006
1/4”1/4”1/4”3/8”1/2”5/8”
xxxxxx
1/2”3/4”
1”5/8”7/8”
1”
1/4”1/4”1/4”1/4”1/4”1/4”
22°14°10°28°28°31°
PM 44 POINTED TREE SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
*1001 1002 1003 1004 1005 1006 1007 1008 1009 1010
1/4”5/16”3/8”1/2”1/2”5/8”3/4”3/4”3/4”3/4”
xxxxxxxxxx
5/8”3/4”3/4”3/4”
1”1”1”1”
1-1/2”1-1/2”
1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”1/4”3/8”
PM 46 EGG SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
*1000 *1001 1002 1003 1004 1005 1006
3/16”1/4”3/8”1/2”5/8”3/4”3/4”
xxxxxxx
5/16”3/8”5/8”7/8”
1”1”1”
1/4”1/4”1/4”1/4”1/4”1/4”3/8”
PM 42 CYLINDRICAL BALL NOSE SHAPE
Catalogue Number
Cutter Diameter
FluteLength Shank
*1001 *1002 1003 1004 1005 1006 1007 1008
3/16”1/4”
5/16”3/8”1/2”5/8”3/4”3/4”
xxxxxxxx
5/8”5/8”3/4”3/4”
1”1”1”1”
1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”
*Solid Carbide
*Solid Carbide
*Solid Carbide
*Solid Carbide
*Solid Carbide
*Solid Carbide
PRECISION GROUND CARBIDE TOOLING
Precision fluting of right and left spirals form staggered angle
cutting edgeswhich remove metal in granular form and eliminates
hazardous slivers.
*3/8” Shank is recommended for burs over 5/8” diameter.
mEDIUm pRECISIoN CUT
-
1/4” AND 3/8” HARDENED STEEL SHANK
3
pm 48 BALL SHApE
Catalogue Number
Cutter Diameter Shank
*1001 *1002 *1003 1004 1005 1006 1007 1008 1009 1010 1011
1/8”3/16”1/4”
5/16”3/8”1/2”5/8”3/4”3/4”
1”1”
1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”1/4”3/8”
PM 49 TAPER
Catalogue Number
CutterDiameter Shank
*1001 1002 1003 1004 1005 1006 1007 1008
1/4”3/8”1/2”5/8”3/4”3/4”
1”1”
1/4”1/4”1/4”1/4”1/4”3/8”1/4”3/8”
90° Incl. angle
PM 50 TAPER
Catalogue Number
CutterDiameter Shank
*1001 1002 1003 1004 1005 1006 1007 1008
1/4”3/8”1/2”5/8”3/4”3/4”
1”1”
1/4”1/4”1/4”1/4”1/4”3/8”1/4”3/8”
60° Incl. angle
CARBIDE BURS
PM 47 14° INCL. TAPER
Catalogue Number
Cutter Diameter
Flute Length Shank
*1001 1002 1003 1004 1005 1006 1007
1/4”5/16”3/8”1/2”5/8”3/4”3/4”
xxxxxxx
5/8”7/8”
1-1/16”1-1/8”
1-5/16”1-1/2”1-1/2”
1/4”1/4”1/4”1/4”1/4”1/4”3/8”
*Solid Carbide
*Solid Carbide
*Solid Carbide
*Solid Carbide
*Solid Carbide
*Solid Carbide
PM 51 FLAME SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
*1000 1001 1002 1003 1004 1005
1/4”5/16”1/2”5/8”3/4”3/4”
xxxxxx
5/8”3/4”
1/1/4”1-7/16”1-5/8”1-5/8”
1/4”1/4”1/4”1/4”1/4”3/8’
PM 52 INVERTED TAPER SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
Included Angle
*1001 1001A 1002 1003 1004 1005
1/4”3/8”1/2”5/8”3/4”3/4”
xxxxxx
5/16”3/8”1/2”3/4”5/8”5/8”
1/4”1/4”1/4”1/4”1/4”3/8”
10°13°28°18°30°30°
Available with End Cut
PRECISION GROUND CARBIDE TOOLING
CARB-I-TOOL Carbide Burs are manufactured in all standard shapes
and diametersto full fill any stock removal, deburring or finishing
requirement.
*3/8” Shank is recommended for burs over 5/8” diameter.
mEDIUm pRECISIoN CUT
-
PRECISION GROUND CARBIDE TOOLING
SOFT METAL CUTTING Ideal for cutting aluminium, zinc, magnesium,
and other soft, sticky materials that tend to load up standard
flute burs.
*3/8” Shank is recommended for burs over 5/8” diameter.
mEDIUm pRECISIoN CUT
4
6” LONG SHANK MAXI-CUT CARBIDE BURS * Denotes available ex stock
with 6” long shanks. Use Prefix PCX eg. PCX 32 1002Other 6” long
shanks on request.
The following R.P.M. for various lengths should not exceed:
2”overall - 24,000 R.P.M4” overall - 12,000 R.P.M6” overall -
6,000 R.P.M
PC 38 BALL SHAPE
Catalogue Number
CutterDiameter Shank
100010011002100310041005
1/4” Diameter 3/8” Diameter 1/2” Diameter 5/8” Diameter 3/4”
Diameter 3/4” Diameter
1/4”1/4”1/4”1/4”1/4”3/8”
mAXI-CUT CARBIDE BURS1/4” AND 3/8” HARDENED STEEL SHANK
*Solid Carbide
PC 31 CYLINDRICAL SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
100010011002100310041005
1/4”3/8”1/2”5/8”3/4”3/4”
xxxxxx
3/4”3/4”
1”1”1”1”
1/4”1/4”1/4”1/4”1/4”3/8”
Available with End Cut
PC 32 CYLINDRICAL BALL NOSE SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
1000 1001 *1002 1003 1004 1005
1/4”3/8”1/2”5/8”3/4”3/4”
xxxxxx
3/4”3/4”
1”1”1”1”
1/4”1/4”1/4”1/4”1/4”3/8”
PC 33 ROUND SHAPE NOSE TREE SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
1000 1001 *1002 1003 1004 1005
1/4”3/8”1/2”5/8”3/4”3/4”
xxxxxx
3/4”3/4”
1”1”
1-1/4”1-1/4”
1/4”1/4”1/4”1/4”1/4”3/8”
PC 36 EGG SHAPE
Catalogue Number
Cutter Diameter
Flute Length Shank
*1001 *1002 1003 1004 1005
3/8”1/2”5/8”3/4”3/4”
xxxxx
5/8”7/8”
1”1”1”
1/4”1/4”1/4”1/4”3/8”
PC 37 14° INCL. TAPER
Catalogue Number
Cutter Diameter
Flute Length Shank
10011002100310041005
3/8”1/2”5/8”3/4”3/4”
xxxxx
1-1/16”1-1/8”
1-5/16”1-1/2”1-1/2”
1/4”1/4”1/4”1/4”3/8”
-
CARB-I-TOOL carbide burs are manufactured in all shapes and
diametersto fulfill any stock removal, deburring or finishing
requirement.
mEDIUm pRECISIoN CUT
5
6” LoNG SHANK CARBIDE BURS1/4” DIAmETER HARDENED STEEL SHANK
PRECISION GROUND CARBIDE TOOLING
For Variations to length of PMX series, R.P.M should not exceed
the following: 2’”overall - 24,000 R.P.M. 4” overall - 12,000
R.P.M. 6” overall - 6,000 R.P.M.
PMX 41 CYLINDRICAL
Catalogue Number
Cutter Diameter
Flute Length
1002
1004
1005
1/4”
3/8”
1/2”
x
x
x
1/2”
3/4”
1”
PMX 43 ROUND NOSE TREE SHAPE
Catalogue Number
Cutter Diameter
Flute Length
1001
1002
1004
1/4”
3/8”
1/2”
x
x
x
1/2”
3/4”
1”
PMX 46 EGG SHAPE
Catalogue Number
Cutter Diameter
Flute Length
1001
1002
1003
1/4”
3/8”
1/2”
x
x
x
3/8”
5/8”
7/8”
PMX 48 BALL SHAPE
Catalogue Number
Cutter Diameter
Flute Length
1003
1005
1006
1/4”
3/8”
1/2”
x
x
x
3/16”
5/16”
7/16”
PMX 42 CYLINDRICAL BALL NOSE
Catalogue Number
Cutter Diameter
Flute Length
1002
1004
1005
1/4”
3/8”
1/2”
x
x
x
1/2”
3/4”
1”
PMX 44 POINTED TREE SHAPE
Catalogue Number
Cutter Diameter
Flute Length
1001
1003
1005
1/4”
3/8”
1/2”
x
x
x
1/2”
3/4”
1”
PMX 47 14° INCL. TAPER
Catalogue Number
Cutter Diameter
Flute Length
1001
1003
1004
1/4”
3/8”
1/2”
x
x
x
5/8”
1-1/16”
1-1/8”
PMX 51 FLAME SHAPE
Catalogue Number
Cutter Diameter
Flute Length
1001
1002
5/16”
1/2”
x
x
3/4”
1-1/4”
-
Automatic machine ground burs with predetermined flute spacing,
depth and rake angle,ensures absolute control and added tool
life.
6
SOLID CARBIDE BURS ‘PMX’ & ‘PMXX’ SERIES
Extra Long MiniatureSolid Carbide Burs
1/8” Shank Diameter 2”or 3” Overall Length
2” Overall Length3” Overall LengthCutting DiameterFlute
Length
PMX 2CPMXX 2C
1/8”9’16”
PMX 2C E/CPMXX 2C EC
1/8”9/16”
PMX 3CPMXX 3C
1/8”9/16”
PMX 4CPMXX 4C
1/8”1/2”
PMX 5CPMXX 5C
1/8”1/2”
PMX 8CPMXX 8C
1/8”1/8”
PMX 9CPMXX 9C
1/8”7/32”
PMX 16CPMXX 16C
1/8”1/4”
PMX 17CPMXX 17C
1/8”1/2”
PMX 18CPMXX 18C
1/8”7/16”
SOLID CARBIDE BURS ‘P’ SERIES
1/4” Cutting Diameter1/8” Diameter Hardened
Steel ShankMedium Precision Cut
Cutting DiameterFlute LengthTaper
PM 1P1/41/2”
PM 1P E/C1/41/2”
PM 2P1/4”1/2”
PM 3P1/4”1/2”
PM 4P1/4”1/2”
PM 5P1/4”1/2”22°
PM 6P1/4”
3/16”
PM 7P1/4”1/4”
PM 8P1/4”3/8”
PM 9P1/4”1/4”10°
SOLID CARBIDE BURS ‘C’ SERIES
1/8” Shank Diameter1-1/2” Overall Length 1-1/2”
Overall LengthCutting DiameterFlute LengthTaper
PM 1C3/32”7/16”
PM 2C1/8”
9/16”
PM 2C EC1/8”
9/16”
PM 3C1/8”
9/16”
PM 4C1/8”3/8”
PM 5C1/8”1/2”
PM 6C1/8”
11/32”12°
PM 7C3/32”7/16”
PM 8C1/8”1/8”
PM 9C1/8”
7/32”
PM 10C1/8”1/2”
1-1/2”Overall LengthCutting DiameterFlute LengthTaper
PM 11C1/8”5/8”7°
PM 12C1/8”
3/16”10°
PM 12C EC1/8”
3/16”10°
PM 13C1/16”1/4”
PM 14C1/8”
PM 15C3/32”3/32”
PM 16C1/8”1/4”
PM 17C1/8”1/2”8°
PM 18C1/8”
7/16”14°
PM 19C1/8”1/4”
PM 20C1/8”
3/32”60° inc.
PM 21C1/8”1/4”
mINIATURE BURS
PRECISION GROUND CARBIDE TOOLING
-
7
SoLID CARBIDEmINIATURE BUR SET #1
1/8” Shank Diameter - 1-1/2” Overall LengthContains the
following twelve1/8” burs in a sturdy hardwood box:
TooL No:pm 1C pm 7C pm 12Cpm 2C pm 8C pm 16Cpm 3C 9m 9C pm 17Cpm
4C pm 10C pm 18C
SoLID CARBIDEBUR SET #6
1/4” Shank DiameterContains the following eightburs in a sturdy
hardwood box:
TooL No:pm 41 1005 pm 43 1002pm 42 1004 pm 44 1005pm 42 1005 pm
44 1003pm 48 1006 pm 47 1004
• Reduce overhang out of collet to minimum.• Use double cut burs
to break up swarf as single cut burs produce harmful slivers.• Use
burs in grinders of sufficient speed to reduce breakage - Do not
use in electric drills.• Do not use grinding tools with worn
bearings• Do not force the tool in cutting the work piece, allow
the bur to cut without excessive pressure.• To prevent swarf
loading on aluminium burs - use appropriate lubricant.
SoLID CARBIDEmINIATURE BUR SET #5
1/4” Cutting Diameter - 1/8” Shank DiameterContains the
following nine1/4” burs in a sturdy hardwood box:
TooL No:pm 1p pm 3p pm 6p E/Cpm 4p pm 2p pm 5ppm 7p pm 9p pm
8p
3 Flute 90° Inc AngleCatalogue No. Cutter dia. Shank dia. O’all
lgth XSCC 1/8 1/8” 1/8” 1-1/2” XSCC 3/16 3/16” 3/16” 2” XSCC 1/4
1/4” 1/4” 2” XSCC 3/8* 3/8” 1/4” 2-13/16” XSCC 1/2* 1/2” 1/4”
2-7/8” XSCC 5/8* 5/8” 3/8” 3” XSCC3/4* 3/4” 1/2” 3” XSCC 1 * 1”
1/2” 3-1/4”*STEEL SHANKAlso Available (price and delivery on
request)3 Flute countersink - 60° and 82°1 and 6 Flute C/sinks -
60° 82° and 90°
SoLID CARBIDE CoUNTERSINKS
DIAMOND POINTSIdeal for carving and engraving on wood, ceramics,
glass and other hard materials.
User Safety Requirements:Warning:When using rotary solid carbide
cutting tools you must wear safety glasses and protective clothing.
Use safety shields on machines as applicable.
PART No. CONTENTS
DPS-20 Cylindricals, Ball End Cylindrical, Balls, Pointed Cones,
Flame, Inverted Taper
PART No. CONTENTS
DPS-50 Cylindricals, Ball End Cylindrical, Cones, Pointed Cones,
Flames, Balls, Tapers, Square Wheel, Radius Wheels
PART No. CONTENTS
DPS-10 Cylindricals, Ball, Cone, Taper, Pointed Cones
BUR SETS
PRECISION GROUND CARBIDE TOOLING
20 pieces - 1/8” shank 50 pieces - 1/8” shank 10 pieces - 1/4”
shank
-
8
CARB-I-TooL RoUTER BITS• Solid Carbide• Carbide Tipped• Diamond
Tipped• Diamond Coated• Replaceable Insert• High Speed Steel3D
RoUTER CARVERCARBIDE TIppED SAW BLADES• Carb-I-Tool Bench Range•
Trade Blade Portable RangeCARB-I-TooL• Hand Planer Blades• TCT and
HSS Buzzer Blade• Wood Boring Drills (TCT and Diamond Tipped)
• TCT Holesaws• Indexable InsertsCARB-I-TooL• Carbide Tipped
Hole Saws• Drill / Countersink Bits• Indexable Inserts• HSS Buzzer
BladeoTHER pRoDUCTS• Handsaws• Drill/Countersink Bits• Jigsaw
Blades• Reciprocating Saw Blades• Corner Chisel• Circle Cutter•
Forstner Bits• Auger Bits
• Brad Point Bits• Drill Saws• Expansion Bits• Multi-Angle Drill
Bits• Rosette Cutters• Spade Bits• Masonry Drill Bits• Diamond Saws
(Masonry)• Chisels• Sharpening Stones• Diamond Points• Router and
Saw Gauges• Glass and Tile Drills• Safety Aids• Specialised
Lubricants• All Purpose Magic Saw
CEmENTED CARBIDES• Ground Rods• Strips & Tips• Disposable
InsertsCARB-I-TooL SoLID CARBIDE TooLS• Burs• Slot Drills• End
Mills• Carbide Drills• Dee BitsCARB-I-TooL• Diamond Grinding
Wheels• Diamond Grinding Compounds• HSS Metal Cutting SawsFoLEY -
BELSAW• Range of saw and cutter sharpening equipment
12 Levanswell Road, MoorabbinVictoria 3189 Australia
Telephone: +61 3 9555 2966Facsimile: +61 3 9555 8695
Email: [email protected]: www.carbitool.com.au
DISTRIBUTORS IN ALL STATESDistributed by:
CARB-I-TOOL (AUST.) PTY. LTD.ABN 26 005 203 289
WOODWORKING PRODUCTS:
BUR SPEED RECOMMENDATIONS
ENGINEERING PRODUCTS:
RPM100,00090,000
80,000
70,000
60,000
50,000
40,000
30,000
20,000
15,000
10,000
BARCUTTINGDIAMETER 1/16” 1/8” 3/16” 5/16” 7/16” 5/8” 1.0”
3/32” 5/32” 1/4” 3/8” 1/2” 3/4”0
STAINLESS STEELOTHER COMMON MATERIALS
These are suggested speeds only. Solid Carbide Burs 1/8” and
smaller may run up to 75,000 RMP. Faster and slower speeds may be
used in different materials.
pRoDUCT RANGE
PRECISION GROUND CARBIDE TOOLING
OC
T 20
11
http://www.carbitool.com.aumailto:[email protected]
01-Carbide Burs04-Maxi-Cut Carbide Burs05-6" Long Shank Carbide
Burs06-Miniature Burs07-Bur Sets08-Product Range08-Contact
Details
