Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
Carbide Burs- Double Cut
- Aluminium Cut- Comprehensive range of shapes to suit your application
- Standard & extra length available- Sets & merchandisers
CARBIDE BURS
Carbide Bur Finder
Cylindrical, Square End
Cylindrical, Square End, Long Reach
Cylindrical, Square End, Al Cut
Cylindrical, Radius End
Cylindrica
l, Radius End, Long Re
ach
Cylindrica
l, Radius End, Al Cut
Ball Shape
Ball Shape, Long Reach
Ball Shape, Al Cut
Oval Shape
Oval Shape, Al Cut
Tree Shape, Radius End
Tree Shape, Radius End
, Long Reach
Tree Shape, Radius End, Al Cut
Tree Shape, Pointed End
Flam
e Shape
Taper Shape
Taper Shape, Long Reach
Taper Shape, Al Cut
Cone Shape
Inverted Cone Shape
Sets & Me
rchandisers
Page
Catalogue Code B200 B210 B215 B201 B211 B216 B202 B212 B217 B203 B218 B204 B213 B219 B205 B206 B207 B214 B220 B208 B209
Material VHM VHM
Surface Finish Brt Brt
Application Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel
Standard Sutton Standard Sutton Standard
Material Geometry Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut
1.0 Steels HB N/mm2 % Elong.
1.1 Mild steels, magnetic soft steel <200 >200 <400 10 • • • • • • • • • • • • • • • • • • • • •1.2 Free cutting, structural, unalloyed <200 >350 <700 30 • • • • • • • • • • • • • • • • • • • • •1.3 Plain carbon, low alloyed <300 >350 <850 20 • • • • • • • • • • • • • • •1.4 Alloy steels harden. / tempered <250 >500 <850 30 • • • • • • • • • • • • • • •1.5 Alloy steels harden. / tempered <350 >850 <1200 30 • • • • • • • • • • • • • • •1.6 Hardened, heat treated,
high tensile alloy <420 >1500 12 • • • • • • • • • • • • • • •1.7 Hardened Steel 45-50 Rc <550 <12
1.8 Hardened Steel 50-62 Rc <700 <12
2.0 Stainless Steels
2.1 Free machining <250 <850 25 • • • • • • • • • • • • • • •2.2 Austenitic <250 <850 20 • • • • • • • • • • • • • • •2.3 Ferritic + martensitic <250 <850 20 • • • • • • • • • • • • • • •3.0 Cast Irons
3.1 Lamellar graphite (Grey soft) <150 <500 10 • • • • • • • • • • • • • • •3.2 Lamellar graphite (Grey hard) <300 <1000 103.3 Nodular (spheroidal)
graphite & malleable <200 <700 10 • • • • • • • • • • • • • • •4.0 Titaniums
4.1 Pure Titanium <250 <850 20
4.2 Titanium alloys >250 >850 20
5.0 Nickels
5.1 Nickel alloys <250 <850 25
5.2 Nickel alloys >250 >850 25
6.0 Coppers
6.1 Pure Copper (electrolytic Cu) <120 <400 12 • • • • • •6.2 Short chip Brass, Phosphor
Bronze, gun metal <200 <700 12
6.3 Long chip Brass, Bronze <200 <700 12
7.0 Aluminiums
7.1 Aluminium unalloyed <100 <350 15 • • • • • •7.2 Magnesium unalloyed <150 <350 15 • • • • • •7.3 Al Alloyed Si < 1.5 % <120 <500 15 • • • • • •7.4 Al Alloyed 1.5 % < Si < 10% <120 <400 10 • • • • • •7.5 Al Alloyed > 10% Si - <400 N • • • • • •7.6 Magnesium alloys - <400 N • • • • • •8.0 Plastics8.1 Plastics, Thermoplastics,
Polyethylene <340 <50 N • • • • • •
• Optimal • Effective428
www.sutton.com.au
430430 431 432 433430 432 432 433431 431
Cylindrical, Square End
Cylindrical, Square End, Long Reach
Cylindrical, Square End, Al Cut
Cylindrical, Radius End
Cylindrica
l, Radius End, Long Re
ach
Cylindrica
l, Radius End, Al Cut
Ball Shape
Ball Shape, Long Reach
Ball Shape, Al Cut
Oval Shape
Oval Shape, Al Cut
Tree Shape, Radius End
Tree Shape, Radius End
, Long Reach
Tree Shape, Radius End, Al Cut
Tree Shape, Pointed End
Flam
e Shape
Taper Shape
Taper Shape, Long Reach
Taper Shape, Al Cut
Cone Shape
Inverted Cone Shape
Sets & Me
rchandisers
B900 BM20
B900 SCB100
B900 BM98
B900 BM200
B900 SCB300
B900 SCB5
Page
Catalogue Code B200 B210 B215 B201 B211 B216 B202 B212 B217 B203 B218 B204 B213 B219 B205 B206 B207 B214 B220 B208 B209
Material VHM VHM
Surface Finish Brt Brt
Application Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel
Standard Sutton Standard Sutton Standard
Material Geometry Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut
1.0 Steels HB N/mm2 % Elong.
1.1 Mild steels, magnetic soft steel <200 >200 <400 10 • • • • • • • • • • • • • • • • • • • • •1.2 Free cutting, structural, unalloyed <200 >350 <700 30 • • • • • • • • • • • • • • • • • • • • •1.3 Plain carbon, low alloyed <300 >350 <850 20 • • • • • • • • • • • • • • •1.4 Alloy steels harden. / tempered <250 >500 <850 30 • • • • • • • • • • • • • • •1.5 Alloy steels harden. / tempered <350 >850 <1200 30 • • • • • • • • • • • • • • •1.6 Hardened, heat treated,
high tensile alloy <420 >1500 12 • • • • • • • • • • • • • • •1.7 Hardened Steel 45-50 Rc <550 <12
1.8 Hardened Steel 50-62 Rc <700 <12
2.0 Stainless Steels
2.1 Free machining <250 <850 25 • • • • • • • • • • • • • • •2.2 Austenitic <250 <850 20 • • • • • • • • • • • • • • •2.3 Ferritic + martensitic <250 <850 20 • • • • • • • • • • • • • • •3.0 Cast Irons
3.1 Lamellar graphite (Grey soft) <150 <500 10 • • • • • • • • • • • • • • •3.2 Lamellar graphite (Grey hard) <300 <1000 103.3 Nodular (spheroidal)
graphite & malleable <200 <700 10 • • • • • • • • • • • • • • •4.0 Titaniums
4.1 Pure Titanium <250 <850 20
4.2 Titanium alloys >250 >850 20
5.0 Nickels
5.1 Nickel alloys <250 <850 25
5.2 Nickel alloys >250 >850 25
6.0 Coppers
6.1 Pure Copper (electrolytic Cu) <120 <400 12 • • • • • •6.2 Short chip Brass, Phosphor
Bronze, gun metal <200 <700 12
6.3 Long chip Brass, Bronze <200 <700 12
7.0 Aluminiums
7.1 Aluminium unalloyed <100 <350 15 • • • • • •7.2 Magnesium unalloyed <150 <350 15 • • • • • •7.3 Al Alloyed Si < 1.5 % <120 <500 15 • • • • • •7.4 Al Alloyed 1.5 % < Si < 10% <120 <400 10 • • • • • •7.5 Al Alloyed > 10% Si - <400 N • • • • • •7.6 Magnesium alloys - <400 N • • • • • •8.0 Plastics8.1 Plastics, Thermoplastics,
Polyethylene <340 <50 N • • • • • •429
www.sutton.com.au
437 437 438437 439436435434 440434434
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the
chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Cylindrical, Square End
Catalogue Code B200 B210 B215Discount Group B0102 B0102 B0102
Material VHM VHM VHM
Surface Finish Brt Brt Brt
Application Steel Steel Aluminium
Geometry Double Cut Double Cut Al Cut
Shank Tolerance - - -
Size Ref. d1 l1 l2 d2 Item # Item # Item #
Double CutSA410 1/16 1-1/2 1/4 1/8 B200 SA410
SA420 3/32 1-1/2 7/16 1/8 B200 SA420
SA430 1/8 1-1/2 9/16 1/8 B200 SA430
SA510 1/4 2 3/16 1/8 B200 SA510
SA140 3/16 2 5/8 1/4 B200 SA140
SA100 1/4 2 5/8 1/4 B200 SA100
SA200 5/16 2-1/2 3/4 1/4 B200 SA200
SA300 3/8 2-1/2 3/4 1/4 B200 SA300
SA400 7/16 2-3/4 1 1/4 B200 SA400
SA500 1/2 2-3/4 1 1/4 B200 SA500
SA600 5/8 2-3/4 1 1/4 B200 SA600
SA700 3/4 2-3/4 1 1/4 B200 SA700
SA900 1 2-3/4 1 1/4 B200 SA900
Double Cut, Long ReachSA3L6 3/8 6-3/4 3/4 1/4 B210 SA3L6
SA5L6 1/2 7 1 1/4 B210 SA5L6
Aluminium CutSA1AC 1/4 2 5/8 1/4 B215 SA1AC
SA3AC 3/8 2-1/2 3/4 1/4 B215 SA3AC
SA5AC 1/2 2-3/4 1 1/4 B215 SA5AC
SA6AC 5/8 2-3/4 1 1/4 B215 SA6AC
SA7AC 3/4 2-3/4 1 1/4 B215 SA7AC
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
430
www.sutton.com.au
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the
chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Cylindrical, Radius End
Catalogue Code B201 B211 B216Discount Group B0102 B0102 B0102
Material VHM VHM VHM
Surface Finish Brt Brt Brt
Application Steel Steel Aluminium
Geometry Double Cut Double Cut Al Cut
Shank Tolerance - - -
Size Ref. d1 l1 l2 d2 Item # Item # Item #
Double CutSC410 3/32 1-1/2 1/2 1/8 B201 SC410
SC420 1/8 1-1/2 1/2 1/8 B201 SC420
SC510 1/4 2 1/2 1/8 B201 SC510
SC120 1/8 2 1/2 1/4 B201 SC120
SC140 3/16 2 5/8 1/4 B201 SC140
SC100 1/4 2 5/8 1/4 B201 SC100
SC200 5/16 2-1/2 3/4 1/4 B201 SC200
SC300 3/8 2-1/2 3/4 1/4 B201 SC300
SC400 7/16 2-3/4 1 1/4 B201 SC400
SC500 1/2 2-3/4 1 1/4 B201 SC500
SC600 5/8 2-3/4 1 1/4 B201 SC600
SC700 3/4 2-3/4 1 1/4 B201 SC700
Double Cut, Long ReachSC3L6 3/8 6-3/4 3/4 1/4 B211 SC3L6
SC5L6 1/2 7 1 1/4 B211 SC5L6
Aluminium CutSC1AC 1/4 2 5/8 1/4 B216 SC1AC
SC3AC 3/8 2-1/2 3/4 1/4 B216 SC3AC
SC5AC 1/2 2-3/4 1 1/4 B216 SC5AC
SC7AC 3/4 2-3/4 1 1/4 B216 SC7AC
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
431
www.sutton.com.au
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip
to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Ball Shape
Catalogue Code B202 B212 B217Discount Group B0102 B0102 B0102
Material VHM VHM VHM
Surface Finish Brt Brt Brt
Application Steel Steel Aluminium
Geometry Double Cut Double Cut Al Cut
Shank Tolerance - - -
Size Ref. d1 l1 l2 d2 Item # Item # Item #
Double CutSD410 3/32 1-1/2 1/8 B202 SD410
SD420 1/8 1-1/2 1/8 B202 SD420
SD510 1/4 1-3/4 1/8 B202 SD510
SD110 1/8 2 1/4 B202 SD110
SD140 3/16 2 1/4 B202 SD140
SD100 1/4 2 1/4 B202 SD100
SD200 5/16 2-1/16 1/4 B202 SD200
SD300 3/8 2-1/16 1/4 B202 SD300
SD400 7/16 2-1/8 1/4 B202 SD400
SD500 1/2 2-3/16 1/4 B202 SD500
SD600 5/8 2-5/16 1/4 B202 SD600
SD700 3/4 2-7/16 1/4 B202 SD700
SD900 1 2-3/4 1/4 B202 SD900
Double Cut, Long ReachSD3L6 3/8 6-3/4 1/4 B212 SD3L6
SD5L6 1/2 6-1/2 1/4 B212 SD5L6
Aluminium CutSD1AC 1/4 2 1/4 B217 SD1AC
SD3AC 3/8 2-1/16 1/4 B217 SD3AC
SD5AC 1/2 2-3/16 1/4 B217 SD5AC
SD6AC 5/8 2-5/16 1/4 B217 SD6AC
SD7AC 3/4 2-7/16 1/4 B217 SD7AC
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
432
www.sutton.com.au
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip
to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Oval Shape
Catalogue Code B203 B218Discount Group B0102 B0102
Material VHM VHM
Surface Finish Brt Brt
Application Steel Aluminium
Geometry Double Cut Al Cut
Shank Tolerance - -
Size Ref. d1 l1 l2 d2 Item # Item #
Double CutSE410 1/8 1-1/2 7/32 1/8 B203 SE410
SE510 1/4 2-1/8 3/8 1/8 B203 SE510
SE100 1/4 2 3/8 1/4 B203 SE100
SE300 3/8 2-11/32 19/32 1/4 B203 SE300
SE500 1/2 2-5/8 7/8 1/4 B203 SE500
SE600 5/8 2-3/4 1 1/4 B203 SE600
SE700 3/4 2-3/4 1 1/4 B203 SE700
Aluminium CutSE3AC 3/8 2-11/32 19/32 1/4 B218 SE3AC
SE5AC 1/2 2-5/8 7/8 1/4 B218 SE5AC
SE6AC 5/8 2-3/4 1 1/4 B218 SE6AC
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
433
www.sutton.com.au
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the
chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Tree Shape, Radius End
Catalogue Code B204 B213 B219Discount Group B0102 B0102 B0102
Material VHM VHM VHM
Surface Finish Brt Brt Brt
Application Steel Steel Aluminium
Geometry Double Cut Double Cut Al Cut
Shank Tolerance - - -
Size Ref. d1 l1 l2 d2 Item # Item # Item #
Double CutSF410 1/8 1-1/2 1/4 1/8 B204 SF410
SF420 1/8 1-1/2 1/2 1/8 B204 SF420
SF510 1/4 2 1/2 1/8 B204 SF510
SF100 1/4 2 5/8 1/4 B204 SF100
SF300 3/8 2-1/2 3/4 1/4 B204 SF300
SF400 7/16 2-3/4 1 1/4 B204 SF400
SF500 1/2 2-3/4 1 1/4 B204 SF500
SF600 5/8 2-3/4 1 1/4 B204 SF600
SF700 3/4 2-3/4 1 1/4 B204 SF700
SF140 3/4 2-3/4 1 -1/4 1/4 B204 SF140
SF150 3/4 3-1/4 1 -1/2 1/4 B204 SF150
Double Cut, Long ReachSF3L6 3/8 6-3/4 3/4 1/4 B213 SF3L6
SF5L6 1/2 7 1 1/4 B213 SF5L6
Aluminium CutSF1AC 1/4 2 3/4 1/4 B219 SF1AC
SF3AC 3/8 2-1/2 3/4 1/4 B219 SF3AC
SF5AC 1/2 2-3/4 1 1/4 B219 SF5AC
SF6AC 5/8 2-3/4 1 1/4 B219 SF6AC
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
434
www.sutton.com.au
435
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the
chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Tree Shape, Pointed End
Catalogue Code B205Discount Group B0102
Material VHM
Surface Finish Brt
Application Steel
Geometry Double Cut
Shank Tolerance -
Size Ref. d1 l1 l2 d2 Item #
Double CutSG410 1/8 1-1/2 1/4 1/8 B205 SG410
SG430 1/8 1-1/2 3/8 1/8 B205 SG430
SG510 1/4 2 1/2 1/8 B205 SG510
SG100 1/4 2 5/8 1/4 B205 SG100
SG200 5/16 2-1/2 3/4 1/4 B205 SG200
SG300 3/8 2-1/2 3/4 1/4 B205 SG300
SG130 1/2 2-1/2 3/4 1/4 B205 SG130
SG500 1/2 2-3/4 1 1/4 B205 SG500
SG600 5/8 2-3/4 1 1/4 B205 SG600
SG700 3/4 2-3/4 1 1/4 B205 SG700
SG150 3/4 2-3/4 1-1/2 1/4 B205 SG150
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
435
www.sutton.com.au
435435
Catalogue Code B206Discount Group B0102
Material VHM
Surface Finish Brt
Application Steel
Geometry Double Cut
Shank Tolerance -
Size Ref. d1 l1 l2 d2 Item #
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the
chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Flame Shape
Double CutSH410 1/8 1-1/2 1/4 1/8 B206 SH410
SH100 1/4 2 5/8 1/4 B206 SH100
SH200 5/16 2-1/2 3/4 1/4 B206 SH200
SH500 1/2 3 1 -1/4 1/4 B206 SH500
SH600 5/8 3-3/16 1 -7/16 1/4 B206 SH600
SH700 3/4 3-3/8 1 -5/8 1/4 B206 SH700
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
436
www.sutton.com.au
Catalogue Code B207 B214 B220Discount Group B0102 B0102 B0102
Material VHM VHM VHM
Surface Finish Brt Brt Brt
Application Steel Steel Aluminium
Geometry Double Cut Double Cut Al Cut
Shank Tolerance - - -
Size Ref. d1 l1 l2 d2 Rad Item # Item # Item #
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the
chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Taper Shape
Double CutSL410 1/8 1-1/2 3/8 1/8 6 B207 SL410
SL420 1/8 1-1/2 1/2 1/8 7 B207 SL420
SL100 1/4 2 5/8 1/4 14 B207 SL100
SL200 5/16 2-5/8 7/8 1/4 14 B207 SL200
SL300 3/8 2-13/16 1 -1/16 1/4 14 B207 SL300
SL400 1/2 2-7/8 1 -1/8 1/4 14 B207 SL400
SL600 5/8 3-1/16 1 -5/16 1/4 14 B207 SL600
SL700 3/4 3-1/4 1 -1/2 1/4 14 B207 SL700
Double Cut, Long ReachSL3L6 3/8 7-1/16 1 -1/16 1/4 14 B214 SL3L6
Aluminium CutSL4AC 1/2 2-7/8 1-1/8 1/4 14 B220 SL4AC
SL6AC 5/8 3-1/16 1-5/16 1/4 14 B220 SL6AC
SL7AC 3/4 3-1/4 1-1/2 1/4 14 B220 SL7AC
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
437
www.sutton.com.au
Catalogue Code B208Discount Group B0102
Material VHM
Surface Finish Brt
Application Steel
Geometry Double Cut
Shank Tolerance -
Size Ref. d1 l1 l2 d2 Angle Item #
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip
to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Cone Shape
SM420 1/8 1-1/2 1/2 1/8 12° B208 SM420
SM430 1/8 1-1/2 5/8 1/8 9° B208 SM430
SM510 1/4 2 1/2 1/8 22° B208 SM510
SM100 1/4 2 1/2 1/4 22° B208 SM100
SM200 1/4 2 3/4 1/4 14° B208 SM200
SM300 1/4 2 1 1/4 12° B208 SM300
SM400 3/8 2-1/2 3/4 1/4 28° B208 SM400
SM500 1/2 2-3/4 1 1/4 28° B208 SM500
SM600 5/8 2-7/8 1-1/8 1/4 31° B208 SM600
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
438
www.sutton.com.au
Catalogue Code B209Discount Group B0102
Material VHM
Surface Finish Brt
Application Steel
Geometry Double Cut
Shank Tolerance -
Size Ref. d1 l1 l2 d2 Angle Item #
- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip
to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts
Carbide Burs Inverted Cone Shape
SN420 1/8 1-1/2 1/8 1/8 14° B209 SN420
SN510 1/4 1-3/4 1/4 1/8 10° B209 SN510
SN100 1/4 2 1/4 1/4 10° B209 SN100
SN200 3/8 2-1/8 3/8 1/4 13° B209 SN200
SN400 1/2 2-1/2 1/2 1/4 28° B209 SN400
SN600 5/8 2-1/2 3/4 1/4 18° B209 SN600
SN700 3/4 2-5/8 5/8 1/4 30° B209 SN700
Taper ShapeFlame Shape
Tree Shape PointedTree Shape Radius
Oval ShapeBall Shape
Cylindrical RadiusCylindrical Square
Cone Shape Inverted Cone Shape
B200 SA300
Catalogue Code Size Ref.
Item #
439
www.sutton.com.au
All sets packed in ABS case (industrial grade plastic material).
Catalogue Code B900Discount Group B0102
Material VHM
Surface Finish Brt
Application -
Geometry -
Shank Tolerance -
Size Ref. Description d1 d2 Qty Item #
Carbide Burs Sets
B900 SCB100 B900 SCB300 B900 SCB5
Bur SetsSCB100 SA 100 SC 100 SD 100 SF 100 SC1 AC 1/4 1/4 5 B900 SCB100
SCB300 SA 300 SC 300 SD 300 SF 300 SC3 AC 3/8 1/4 5 B900 SCB300
SCB500 SA 500 SC 500 SD 500 SF 500 SC5 AC 1/2 1/4 5 B900 SCB500
SCB5 SA 300 SC 300 SC 500 SF 300 SF 500 3/8 & 1/2 1/4 5 B900 SCB5
Trade Counter MerchandiserBM20 SA100 SA300 SA500
SC100 SC300 SC500 SD100 SD300 SE300 SE500 SF100 SF300 SF500 SG300 SH200 SH500 SL200 SL300 SL400 SL600Merchandiser Hardware:PM7020 - Bur Merchandise Unit BM20499980259 - Brochure Carbide Burs
20 B900 BM20
BM98 SA100 SA140 SA200 SA300 SA500 SA600 SC100 SC200 SC300 SC400 SC500 SC600 SD100 SD140 SD300 SD500 SE100 SE300 SE500 SE600 SF100 SF300 SF400 SF500 SG100 SG130 SG200 SG300 SG500 SH200 SH500 SH600 SL100 SL200 SL300 SL400 SL600 SM300 SM400 SM500 SM600 SA3AC SC1AC SC3AC SC5AC SD3AC SF3AC SF5AC SF6AC SL4ACMerchandiser Hardware:PM7024 - Bur Merchandise Unit BM98499980259 - Brochure Carbide Bur
50 B900 BM98
Wall Mounted MerchandisersBM200 SA100 SA140 SA200 SA300 SA500 SA600
SC100 SC200 SC300 SC400 SC500 SC600 SD100 SD140 SD300 SD500 SE100 SE300 SE500 SE600 SF100 SF300 SF400 SF500 SG100 SG130 SG200 SG300 SG500 SH200 SH500 SH600 SL100 SL200 SL300 SL400 SL600 SM300 SM400 SM500 SM600 SA3AC SC1AC SC3AC SC5AC SD3AC SF3AC SF5AC SF6AC SL4ACMerchandiser Hardware:PM7026 - Bur Merchandise Unit BM200499980259 - Brochure Carbide Bur
50 B900 BM200
B200 SA300
Catalogue Code Size Ref.
Item #
B900 BM20
B900 BM98
B900 BM200
440
www.sutton.com.au