Canon SX 130 IS User Guide

Digital Design ArtLevel 1

This is the Canon SX 130 IS

Inserting BatteriesOpen the door on the bottom of the camera

Insert the batteries properly

Insert the SD memory cardBe careful to insert it right side-up

Top Controls

23

Top Controls - 2

1. On/Off button – press to turn on or off.2. Shutter release buttono Press lightly about half-way to enable auto-focuso Press all the way to take photoo Zoom switch around the shutter release button

3. Mode wheelo Allows you to choose your shooting mode.

Back Controls

1

2

4

3

Back Controls 2

1. This is the LCD Display2. Control Wheel3. Playback Buttono You can view your photoso Use the Control Wheel to go forward and

backward

4. Menu Buttono Allows you to change menu settings

Transferring your photosto the computer - 1

You need to obtain a USB Card Reader

Transferring your photosto the computer - 2

Take the SD card out of the camera, open the card reader at the straight end and load it in the card Reader. Make sure the labels face in the same direction.

Transferring your photosto the computer - 3

Close the card Reader. Open the other end and plug it into the USB port of your computer.

Transferring your photosto the computer - 4

• You will get an Auto Play window.

• Click on Open to view files.

• You do this so you can find your photos.

• Remember that other students are using the cameras.

Transferring your photosto the computer - 4

• You will see a folder called DCIM• Open it to view files.• You will see some folders, select

the one for today’s date and open it.

• Select your photos• Copy them to your computer