Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
© 2016 MecSoft Corporation
CAMJam 2016 with VisualCAM-MILL (SAMPLE)
CAMJam 2016 with VisualCAM-MILL (SAMPLE)2
© 2016 MecSoft Corporation
Read this FIRST!
-- THIS IS A SAMPLE ONLY --
-- CAMJam 2016 INCLUDES OVER 80 VIDEOS! --
-- COVERS ALL 2015 & 2016 OPERATIONS! --
-- INCLUDES FULL CONTENTS AND KEYWORD INDEX! --
CAMJam with VisualCAM 2016 for SolidWorks is the complete unscripted videoarchive of training sessions conducted by the support staff here at MecSoftCorporation. Each topic in the Contents (at left) contains one or more CAMJamvideos explaining the use and application of VisualCAM 2016 for SolidWorks.
Playing Video Content
Note: An active internet connection is required to view these videos!
Each topic contains video thumbnail images. Selecting the image will launch theselected video automatically and begin playing it in your default Web Browser.
Locating Topics in Videos
Each topic in this guide also contains a general outline of the topics discussed in thereferenced video(s). These outlines are a general guide only. You can use the Contents to browse for a topic of interest. You can also use the Index tab in thisguide to search for keywords of interest to display a list of topics and relevant videos.
Sample CAMJam Part Files
All of the example part files used in the videos are included with this online help file. Please locate the folder where you downloaded this online help file.
Copyright © 2015/2016 MecSoft CorporationThursday, July 21, 2016
2½ Axis Machining Strategies 3
© 2016 MecSoft Corporation
2½ Axis Machining Strategies
2.1 Roughing
Available in:2016
Xpress Standard Expert Professional Premium
Reference Videos:
VisualCAM 2016 for SolidWorks - 2½ Axis Roughing (23:43)
Description:
2½ Axis Roughing is an area clear operation similar to facing &pocketing that automatically considers the extents of the defined Stock as drive regions and any selected Control Geometry by theuser as part boundaries.
Related Topics:
Introduction to 2½ Axis Roughing
Selecting Control Geometry
Feeds & Speeds
Cutting Parameters
o Automatically select Facing Cut Pattern based on Core Regions
o Corner Cleanup Loop options
Cut Level Definition
Engage & Retract options
Advanced Cut Parameters
2.2 Pocketing
Available in: Xpress Standard Expert Professional Premium
CAMJam 2016 with VisualCAM-MILL (SAMPLE)4
© 2016 MecSoft Corporation
2015/2016
Reference Videos:
VisualCAM 2016 for SolidWorks - 2½ Axis Pocketing (17:44)
Description:
Pocket machining is a method of generating planar toolpaths usingregions as the part geometry limits. Here the 3-D part geometrymodel is not considered in the toolpath generation. Instead the inputregions are used to construct a virtual 3-D part geometry model thathas vertical walls with the top edge defined by the regions Z values or a userspecified value and has an XY shape defined by the regions geometry.
Related Topics:
Introduction to 2½ Axis Pocketing
Drive Containment considerations
Tool, Speeds, Feeds and Clearance Plane
Cut Parameters
Tolerances and Stock allowance
Cutter Compensation
Cut Pattern, Cut Direction, Start Point and Stepover
Cut Level parameters
Locations of Cut Geometry
Rough and Finish Depths
Cut Level Ordering
Clear Island Tops
Entry and Exit for pocketing
Engage and Retract Motion options
2½ Axis Machining Strategies 5
© 2016 MecSoft Corporation
Generate, review and Simulate the toolpath in levels
Editing the Pocket toolpath
If the Helical Engage Motion is too large
Perform Arc Fitting
Simulate the toolpath
Examples for:
Clean Corners
Keep Tool Down
Pockets with Islands
Clear Island Tops
-- THIS IS A SAMPLE ONLY --
-- CAMJam 2016 INCLUDES OVER 80 VIDEOS! --
-- COVERS ALL 2015 & 2016 OPERATIONS! --
-- INCLUDES FULL CONTENTS AND KEYWORD INDEX! --