Upload
crissdemon
View
220
Download
0
Embed Size (px)
Citation preview
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 1/46
IP video via air
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 2/46
The system is able to transmit data from a large number of IP cam-
eras to a single recording device in small as well as large and seg-
mented company facilities. Thanks to its variability and easy exten-
sibility it is often used also as part of city CCTV systems.
Its installation does not require any previous knowledge of data
transmission in LAN networks. Therefore, CamiBOX® can also be
employed by companies that have installed CCTV systems that are
based on analogue transmission.
The entire transmission network has been designed and can be in-
stalled as a simple kit that consists of three basic modular elements:
* Control unit “M” fixed to a building,
including a recording device.
* Arbitrary number of client units “C”
to which cameras are connected.
* If these are not in direct view, “S”
units are employed, serving as relay
or connecting network points.
The system is supplied pre-configured according to customer’s
brief specifications. It only needs to be installed and connected to
IP cameras using an accompanying diagram. Location of the indi-
vidual wireless connections during activation is facilitated by acous-
tic signalization of the signal quality.
The resulting infrastructure allows for transmission of any type of IP
data. This means that in addition to camera images, the network is
able to transmit two-way audio, commands for Speed-Dome cam-
eras or state values from sensors, etc. The correct design of an IP
camera system requires only the support of the selected camera
type with a recording device, and sufficient network throughput
depending on the number of cameras while maintaining the re-quired quality of image.
CamiBOX® is intended for outdoor use, the units are fully resistant
to European weather conditions and temperatures and they do not
require any additional covers or heating. The units are powered by
means of the so-called Power Over Ethernet from a distribution
network, batteries or solar panels.
Maximum security, i. e. double security, of information transmission
is ensured. The wireless transmission log is proprietary and at the
same time provided with a strong encryption. It is therefore almost
impossible for an unauthorized person to hack the wireless trans-mission and obtain the image transmitted.
The range of individual wireless connections between the units
covers hundreds of meters and it is sufficient for most applications,
even in large facilities. City CCTV systems, which are able to moni-
tor rather large areas, i.e. its individual connections exceed hun-
dreds of meters, are complemented with additional cameras that,
depending on their individual types, allow for connections covering
dozens of kilometres.
The system can also be rented, which is usually done by constructioncompanies, providing for fast and cheap security of their entire con-
struction sites for a temporary period of several weeks or months.
Rentals with prospective purchase are arranged by companies that
offer to their customers the possibility to test the entire solution in
practice before purchasing the system and thus help them decide
whether to employ it or not.
Extra servicing can be ordered together with the system if cus-
tomers require maximum availability of the service. This servicing
ensures that in case a failure is reported a replacement for the fault
unit is delivered to the site within several hours.
By including CamiBOX® in your projects you will ensure easy and
quick installation as well as the satisfaction of your customers, who
will be provided with a system which is seemingly impossible or
difficult to implement.
web | http://www.camibox.eu
Product DescriptionCamiBOX® is a professional modular system solution for wireless image transferwithin the licence-free band designed for outdoor application.
IP video via air
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 3/46web | http://www.camibox.eu
CamiBOX-C
The “C” (Client) input units are used on the network termination
points. The “C” units are used as the input interface from IPdevices, which can be any devices with an Ethernet output such as
IP cameras or video converters, using Ethernet (LAN) outputs.
The digit in the unit type designation states how many LAN inputs
the “C” unit has, i.e. how many IP devices can be connected to
the unit.
The units have a single wireless interface. The conditions permit-
ting, the wireless link is routed directly against unit “M”; an “S”
unit may be inserted between units “C” and “M” in larger systems
that do not provide direct visibility.
In case of greater distances to the other side of the wireless
connection, an antenna is supplied with unit “C” and can be
attached to the unit with a coaxial cable. The cases in which
a higher-gain, i.e. larger, antenna has to be used instead of the
basic version of the integrated antenna are specified in the data
sheet for additional antennas.
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 4/46
CamiBOX-C1
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-C1
EAN: 8595557828983
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 1
number of Ethernet (LAN) interfaces: 1
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz/5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 1
of which integrated in the unit: 1
of which additional antennas (included): –
of which usable for reception –
antenna type supplied: –
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 6 W ± 6%
power consumption at standby: 5 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 1
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 5/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/C1/
URL in QR code:
Document Information
CamiBOX-C1
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.462 kg
weight incl. additional antennas: –
packaged weight: 2.5 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 6/46
CamiBOX-C2
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-C2
EAN: 8595557828990
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 1
number of Ethernet (LAN) interfaces: 2
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 1
of which integrated in the unit: 1
of which additional antennas (included): –
of which usable for reception –
antenna type supplied: –
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 6 W ± 6%
power consumption at standby: 5 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 2
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 7/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/C2/
URL in QR code:
Document Information
CamiBOX-C2
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.511 kg
weight incl. additional antennas: –
packaged weight: 3 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 8/46
CamiBOX-C3
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-C3
EAN: 8595557829003
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 1
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 1
of which integrated in the unit: 1
of which additional antennas (included): –
of which usable for reception –
antenna type supplied: –
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 6 W ± 6%
power consumption at standby: 5 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 9/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/C3/
URL in QR code:
Document Information
CamiBOX-C3
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.533 kg
weight incl. additional antennas: –
packaged weight: 3 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 10/46
CamiBOX-C4
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-C4
EAN: 8595557829010
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 1
number of Ethernet (LAN) interfaces: 4
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 1
of which integrated in the unit: 1
of which additional antennas (included): –
of which usable for reception –
antenna type supplied: –
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 6 W ± 6%
power consumption at standby: 5 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 4
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 11/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/C4/
URL in QR code:
Document Information
CamiBOX-C4
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.618 kg
weight incl. additional antennas: –
packaged weight: 3 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 12/46
CamiBOX-C5
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-C5
EAN: 8595557829027
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 1
number of Ethernet (LAN) interfaces: 5
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 1
of which integrated in the unit: 1
of which additional antennas (included): –
of which usable for reception –
antenna type supplied: –
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 6 W ± 6%
power consumption at standby: 5 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 5
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 13/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/C5/
URL in QR code:
Document Information
CamiBOX-C5
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.692 kg
weight incl. additional antennas: –
packaged weight: 3 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 14/46web | http://www.camibox.eu
CamiBOX-S
The “S” (Slave) repeater units are used as units merging multiple
incoming routes into a single connection with the “M” unit. The in-coming routes may be connections from other “S” and/or “C” units.
The unit may also be used to reroute a single incoming link if direct
connection cannot be established between neighbouring units, e. g.
if the connection is to be performed round the corner of a building.
The system may include multiple “S” units. Their number usually var-
ies with the operating conditions and project size. It depends on the
total number of cameras in the system and on the complexity of the
environment. The Slave units may also be chained.
In addition to its main function (ensure wireless communication with
all the direct neighbour units),, this unit also enables the direct con-nection of IP devices (e. g. cameras, video converters or recorders)
using Ethernet (LAN) inputs.
The number of wireless routes is different in each version of the
unit. Each “S” unit comprises a single wireless interface (WLAN1)
set for connection with the “M” unit; in larger-scale systems, the
connection may also be with another “S” unit. The digit in the type
designation of the “S” unit states how many wireless routes the unit
receive from. The lower versions of the “S” unit (the “Compact”
design) include an integrated basic antenna while higher versions
(“Metal”) do not have an integrated antenna. These differences are
specified in the individual product sheets.
Every additional wireless link which does not utilise an integrated
antenna is carried out using an external antenna connected to
a WLAN connector of the unit using a coaxial cable. Each basic
version of the additional antenna, including the cable, is always
supplied with the “S” unit. All the additional antennas are therefore
already included under the ordering number and in the price of the
unit, and as such they do not need to be ordered separately.
The cases in which a higher-gain, i.e. larger, antenna needs to be
used instead of the basic version of the integrated antenna are speci-
fied in the data sheet for additional antennas.
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 15/46
CamiBOX-S1
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S1
EAN: 8595557829034
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 2
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 2
of which integrated in the unit: 1
of which additional antennas (included): 1
of which usable for reception 1
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 9 W ± 6%
power consumption at standby: 7 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 16/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S1/
URL in QR code:
Document Information
CamiBOX-S1
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.626 kg
weight incl. additional antennas: 3.144 kg
packaged weight: 4 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 17/46
CamiBOX-S2
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S2
EAN: 8595557829041
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 3
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 3
of which integrated in the unit: 1
of which additional antennas (included): 2
of which usable for reception 2
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 11 W ± 6%
power consumption at standby: 8 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 18/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S2/
URL in QR code:
Document Information
CamiBOX-S2
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.620 kg
weight incl. additional antennas: 4.662 kg
packaged weight: 6 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 19/46
CamiBOX-S3
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S3
EAN: 8595557829218
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 4
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 4
of which integrated in the unit: –
of which additional antennas (included): 4
of which usable for reception 3
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 19 W ± 6%
power consumption at standby: 15 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 20/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S3/
URL in QR code:
Document Information
CamiBOX-S3
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.394 kg
weight incl. additional antennas: 13.466 kg
packaged weight: 15 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 21/46
CamiBOX-S4
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S4
EAN: 8595557829225
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 5
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 5
of which integrated in the unit: –
of which additional antennas (included): 5
of which usable for reception 4
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 22 W ± 6%
power consumption at standby: 17 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 22/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S4/
URL in QR code:
Document Information
CamiBOX-S4
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.411 kg
weight incl. additional antennas: 14.984 kg
packaged weight: 17 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 23/46
CamiBOX-S5
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S5
EAN: 8595557829232
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 6
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 6
of which integrated in the unit: –
of which additional antennas (included): 6
of which usable for reception 5
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 24 W ± 6%
power consumption at standby: 18 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 24/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S5/
URL in QR code:
Document Information
CamiBOX-S5
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.428 kg
weight incl. additional antennas: 16.502 kg
packaged weight: 19 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 25/46
CamiBOX-S6
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S6
EAN: 8595557829256
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 7
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 7
of which integrated in the unit: –
of which additional antennas (included): 7
of which usable for reception 6
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 26 W ± 6%
power consumption at standby: 19 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 26/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S6/
URL in QR code:
Document Information
CamiBOX-S6
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.445 kg
weight incl. additional antennas: 18.020 kg
packaged weight: 21 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 27/46
CamiBOX-S7
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-S7
EAN: 8595557829300
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 8
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 8
of which integrated in the unit: –
of which additional antennas (included): 8
of which usable for reception 7
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 26 W ± 6%
power consumption at standby: 19 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 28/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/S7/
URL in QR code:
Document Information
CamiBOX-S7
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.462 kg
weight incl. additional antennas: 19.538 kg
packaged weight: 23 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 29/46web | http://www.camibox.eu
CamiBOX-M
There is only a single “M” (Master) control unit in the CamiBOX
system. It is placed at the top of the tree-type network structure,i.e. at the location where the recording or monitoring device is
placed. All the wireless routes and data meet in this unit.
It is possible to direct “C” units, “S” units and/or a combination of
“C” and “S” units from various directions to the “M” unit.
In addition to its main function (control of the entire CamiBOX
network structure, and wireless communication with all the
neighbour units), this unit also enables the direct connection of IP
devices (e. g. cameras, video converters or recorders) using Ether-
net (LAN) inputs.
The number of wireless routes and of the LAN interfaces is different
in each version of the “M” unit. The digit in the type designation of
the “M” unit states how many wireless routes the unit receive from.
The lower versions (the “Compact” design) include an integrated
basic antenna while the higher versions (“Metal”) do not have an
integrated antenna. These differences are specified in the individual
product sheets.
Every additional wireless link which does not utilise an integrated
antenna is carried out using an external antenna connected to
a WLAN connector of the unit using a coaxial cable. A basic version
of the additional antenna and cable is always supplied with the
“M” unit. All the additional antennas are therefore already included
under the ordering number and in the price of the unit, and as such
they do not need to be ordered separately.
The cases in which a higher-gain, i. e. larger, antenna has to be used
instead of the basic version of the integrated antenna are specified
in the data sheet for additional antennas.
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 30/46
CamiBOX-M1
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M1
EAN: 8595557829065
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 1
number of Ethernet (LAN) interfaces: 1
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 1
of which integrated in the unit: 1
of which additional antennas (included): –
of which usable for reception 1
antenna type supplied: –
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 8 W ± 6%
power consumption at standby: 7 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 1
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 31/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M1/
URL in QR code:
Document Information
CamiBOX-M1
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.453 kg
weight incl. additional antennas: –
packaged weight: 2.5 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 32/46
CamiBOX-M2
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M2
EAN: 8595557829072
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 2
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 2
of which integrated in the unit: 1
of which additional antennas (included): 1
of which usable for reception 2
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 9 W ± 6%
power consumption at standby: 7 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 33/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M2/
URL in QR code:
Document Information
CamiBOX-M2
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.626 kg
weight incl. additional antennas: 3.144 kg
packaged weight: 4 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 34/46
CamiBOX-M3
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M3
EAN: 8595557829089
Designation
conformity: CE(!)
unit design version: Compact
number of wireless routes (WLAN): 3
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 3
of which integrated in the unit: 1
of which additional antennas (included): 2
of which usable for reception 3
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 22 ~ 66 mm
recommended mast diameter: Ø >= 32 mm, <= 50 mm
minimum height of the vertical part of the bracket: > 80 mm
optional vertical tilting of holder: ± 20°
wall mounting: using the bracket supplied
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector (LAN1)
PoE injector: 24 V (supplied)
unit supply voltage: 12 ~ 24 V DC
power consumption at full load: 11 W ± 6%
power consumption at standby: 8 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 35/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M3/
URL in QR code:
Document Information
CamiBOX-M3
web | http://www.camibox.eu
height, width, depth (incl. holder): 224 x 195 x 184 mm
unit weight (incl. mast holder): 1.620 kg
weight incl. additional antennas: 4.662 kg
packaged weight: 6 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 36/46
CamiBOX-M4
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M4
EAN: 8595557829164
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 4
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 4
of which integrated in the unit: –
of which additional antennas (included): 4
of which usable for reception 4
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 19 W ± 6%
power consumption at standby: 15 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 37/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M4/
URL in QR code:
Document Information
CamiBOX-M4
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.394 kg
weight incl. additional antennas: 13.466 kg
packaged weight: 15 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 38/46
CamiBOX-M5
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M5
EAN: 8595557829171
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 5
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 5
of which integrated in the unit: –
of which additional antennas (included): 5
of which usable for reception 5
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 22 W ± 6%
power consumption at standby: 17 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 39/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M5/
URL in QR code:
Document Information
CamiBOX-M5
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.411 kg
weight incl. additional antennas: 14.984 kg
packaged weight: 17 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 40/46
CamiBOX-M6
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M6
EAN: 8595557829188
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 6
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 6
of which integrated in the unit: –
of which additional antennas (included): 6
of which usable for reception 6
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 24 W ± 6%
power consumption at standby: 18 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 41/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M6/
URL in QR code:
Document Information
CamiBOX-M6
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.428 kg
weight incl. additional antennas: 16.502 kg
packaged weight: 19 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 42/46
CamiBOX-M7
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M7
EAN: 8595557829195
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 7
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 7
of which integrated in the unit: –
of which additional antennas (included): 7
of which usable for reception 7
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mmminimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 26 W ± 6%
power consumption at standby: 19 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 43/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M7/
URL in QR code:
Document Information
CamiBOX-M7
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.445 kg
weight incl. additional antennas: 18.020 kg
packaged weight: 21 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 44/46
CamiBOX-M8
web | http://www.camibox.eu
product identification (ordering number): CamiBOX-M8
EAN: 8595557829201
Designation
conformity: CE(!)
unit design version: Metal
number of wireless routes (WLAN): 8
number of Ethernet (LAN) interfaces: 3
Basic specifications
frequency band: 5.1 ~ 5.8 GHzoperating band: limited according to the
legislation of the country
radiated power: set according to the legislationof the country
signal modulation: OFDM (IEEE 802.11a)
bandwidth / step: 20 MHz / 5 MHz
communication speed: 54 ~ 6 Mbps, auto-fallback
maximum real single link data flow: 40 Mbps (UDP), 35 Mbps (TCP)
communication type: half-duplex
resistance to interference: DFS(automatic channel selection)
wireless connection and transfer security: WPA2 EAP, eas ccm+ Radius server
number of wireless routes (WLAN): 8
of which integrated in the unit: –
of which additional antennas (included): 8
of which usable for reception 8
antenna type supplied: CamiBOX-A019
WLAN connector type on the unit: R-SMA (female)
Radio (WLAN) properties
polarisation: linear, selectable (H/V)
gain: 19 dB (5,5 GHz)
angle of radiation (-3 dB): 21° H / 21° V
PSV (VSWR): < 1,2
Integrated antenna
ambient operating temperature: -25°C ~ +50°C
ingress protection (IEC 60529): IP 65
method of attachment to vertical structures: mast or bracket, Ø 43 ~ 80 mm
recommended mast diameter: Ø >= 48 mm, <= 70 mm
minimum height of the vertical part of the bracket: > 150 mm
optional vertical tilting of holder: (none)
wall mounting: 4 screws (not included)
Operating conditions
mains voltage: 110 ~ 230 V, 50 Hz
power supply method: PoE injector, IEEE 802.3af (LAN1)
PoE injector: 56 V (supplied)
unit supply voltage: 38 ~ 56 V DC
power consumption at full load: 28 W ± 6%
power consumption at standby: 20 W ± 6%
Power supply
connector type: RJ45, IP-67 (water resistant)
communication speed: 1000/100/10 Mbps
interface functions: Auto-Negotiation, Auto MDI/X
number of Ethernet (LAN) interfaces: 3
connecting cables to LAN interfaces: FTP, 2 m
Ethernet (LAN) properties
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 45/46
revision: rev-210.07
electronic version URL: http://www.camibox.eu/product/M8/
URL in QR code:
Document Information
CamiBOX-M8
web | http://www.camibox.eu
height, width, depth (incl. holder): 310 x 366 x 285 mm
unit weight (incl. mast holder): 7.462 kg
weight incl. additional antennas: 19.538 kg
packaged weight: 23 kg
Dimensions
7/30/2019 Camibox Datasheet En
http://slidepdf.com/reader/full/camibox-datasheet-en 46/46