CALENDAR - Saveetha Engineering College

SAVEETHA ENGINEERING COLLEGE 1

CALENDAR 2019-2020

Saveetha Engineering College (Autonomous)

Saveetha Nagar, Thandalam Sriperumbudur, Kancheepuram (Dist.)

Chennai – 602 105, Tamilnadu Ph: 044-66726677 Fax: 044-66726680

E-mail: [email protected] Website: saveetha.ac.in


Our Vision

To be, and to be recognized for setting the standards of excellence in engineering education and high quality research in Science and Technology.

Our Mission To promote academic excellence, widen intellectual horizons; inculcate self-discipline and high ideals for the total personality development of the individual.

Quality Policy Providing quality education & training with continual improvement in facilities and personnel at all levels to be the best and to enhance entrepreneurship, employability and capability to pursue higher studies through academic excellence and total personality development.


Saveetha Engineering College Saveetha Nagar, Thandalam, Chennai – 602 105.

Affiliated to Anna University, Chennai.

ISO 9001:2015 Certified Institution

Accredited by NBA& NAAC

Approved by AICTE, New Delhi.


CALENDAR 2019 – 2020


Personal Memorandum

Name : __________________________________________________

Reg. No : __________________________________________________

Year of Study : __________________________________________________

Branch of Study : __________________________________________________

Permanent Address : __________________________________________________

Tel No. (Landline) : __________________________________________________

Local Address : __________________________________________________

__________________________________________________

__________________________________________________

__________________________________________________

Mobile No. : __________________________________________________

Email I.D : __________________________________________________

Mode of Transport to College : __________________________________________________

Bank A/c. No. : __________________________________________________

Blood Group : __________________________________________________

Motor Car / Scooter No. : __________________________________________________

Driving License No. : __________________________________________________

Passport No. :

In the event of accident, please notify: _____________________________________________

___________________________________________________________________________


COLLEGE EMBLEM

Our College Emblem comprises of a gear wheel within which we find an open

book bearing a computer, satellite, dish antenna and an atom. Vertically across like a

book mark is the Vel which symbolizes power and wisdom.

The components inscribed in the emblem are not just the pictorial

representations but representations which have got their own significance A gear is a

component within a transmission device that transmits rotational force to another

gear or device. The most important feature is that, gears of unequal sizes can be

combined to produce a mechanical advantage so that the rotational speed is achieved.

Another literary significance attached to this word is personal belonging. True to the

above definitions, Saveetha Engineering College, by clubbing people from different

walks of life together is reaching its milestone steadily gearing up persistent

momentum with the help of students and faculty with a sense of personal belonging

to each other.

The open book within the wheel aspires to promote literacy in the field of

engineering education as energetically and thoroughly as possible and that means we

would like to work with volunteers, donors and supporters of every ethnicity, age,

gender, interest and so on. Needless to say, it refers to the effective and inspiring

literary organization. The four techno gifts- computer, satellite, dish antenna and

atom are the symbolic representation of the most modern advancements in science

and technology.

The College motto “BE THE BEST” carries a message to the students that

they aim for the best in education. Saveetha shall continue to work to reach

perfection. The year 2001, mentioned below the book denotes the inception of this

esteemed institution under the Saveetha Group of Institutions.


A Bird’s Eye View about our Institution…

Saveetha Engineering College, Chennai was established in the year 2001 by the

management of the well-known Saveetha Dental College (now Saveetha University). The

College is approved by AICTE, affiliated to Anna University, Chennai and accredited by

NBA (New Delhi) and NAAC. The College progresses with the sole aim of imparting

best technical education for excellence and ethics as their core values, thereby producing

engineers at par with the country’s renowned institutions. The institution strives to reach

a unique place among the Engineering Colleges by developing, infrastructure facilities in

the areas of teaching and research, good faculty members and thereby providing best

human resources to the world outside.

This institution started on a modest scale with three branches with strength of

180 students, has now blossomed into quite a large institution with 11programmes at

UG level and 8 programmes at the PG level, with a total strength of 4750 students

approximately.

Located at about 8 kms from Poonamallee Township, the campus of Saveetha

Engineering College is spread over a sprawling area of around 120 acres, facing the

famous Chembarambakkam Lake on the Chennai - Bangalore National Highway. The

college buildings have been architecturally and aesthetically laid out amidst a calm serene

environment, conducive for intellectual pursuits.

Main Building is a Circular Block which has a built-up area of 2,50,000 Sq.ft. and

houses the Departments of Computer Science & Engineering, Information Technology,

Electronics & Communication Engineering, Electronics and Instrumentation

Engineering and Electrical & Electronics Engineering, Civil Engineering, Mechanical

Engineering, Agriculture Engineering, Biomedical Engineering, Medical Electronics

Engineering, MBA and the common facilities like Administrative Office, the Library,

Placement Cell and Examination Cell. A separate block with a built-up area of about

85341.66sq.ft houses the departments of Mechanical Engineering, Civil Engineering


Chemical Engineering, and the Science & Humanities. Separate Student rest rooms for

Girls and Boys are provided in this Block.

The College is well developed with excellent infrastructure facilities, buildings,

laboratories, library, computer Centre and research Centre and qualified and experienced

faculty to train our students.

To lead the organization towards professionalism, our management has identified

and used quality management principles which form the basis for standardization of the

institution.

A Quality Manual, exclusively designed to maintain this standardization, describes

the Quality Management System being implemented in Saveetha Engineering College in

line with ISO 9001: 2008, for providing technical education services, leading to graduate

and Post Graduate degrees. Facilitation of placement and entrepreneurship, support

functions / service such as library, stores, transport and personality development

activities such as physical Education and NSS/YRC are also included in the scope of the

Quality Management System.

WI-FI FACILITY AND COLLEGE WEB PORTAL

Internet facility in the College is enhanced to 100 MBPS.

Students’ attendance and their marks in each assessment tests are being updated

daily in the college website for the parents view.

All academic information including daily lecture notes and important questions

are updated.

The major highlights of our Institution are:

State- of- Art Communication skills laboratory

Career laboratory

An active E-Cell with active members and vibrant activities

Good Placement and Training Centre comprising Placement portal with good

networking with Companies, Industries and Students.

Synapse-A certified training program

Research and Development Centre


Students oriented innovations.

In house computerized student record.

Programmes Offered in our Institution

UG Programmes

B.E.

B.E – Agricultural Engineering

B.E – Bio Medical Engineering

B.E - Civil Engineering

B.E - Computer Science and Engineering

B.E - Electronics and Communication Engineering

B.E - Electrical and Electronics Engineering

B.E –Electronics and Instrumentation Engineering

B.E. - Mechanical Engineering

B.E – Medical Electronics Engineering

B.Tech

B.Tech - Information Technology

B.Tech - Chemical Engineering

PG Programmes

M.B.A - Master of Business Administration

M.E – Computer Science and Engineering

M.E - CAD/ CAM

M.E - Applied Electronics

M.E- Communication and Networking

M.E –Software Engineering

M.E- Embedded System Technologies

M.E– VLSI Design


Governing Trust

Saveetha Engineering College is governed by Saveetha Medical and Educational Trust. The

College is headed by the Founder President Dr.N.M. Veeraiyan and the Director

Dr. S. Rajesh. The trust was founded by Dr. N. M. Veeraiyan, a committed and dedicated

medical professional, who has been a visionary in the establishment of Saveetha Institute of

Medical &Technical Science (Deemed University) with the following constituent institutions.

Saveetha College of Dental Surgery

Saveetha College of Nursing

Saveetha College of Physiotherapy

Saveetha School of Engineering

Saveetha Medical College & Hospital

Saveetha School of Management

Saveetha School of law

Saveetha School of Physical Education

The trust has started a School following CBSE syllabus with the name,

The Pupil (Saveetha Eco School)


Members of the Governing Council

Sl. No Governing Council Member Category

1

Dr. N. M. VEERAIYAN,

President (SMET) and Chancellor - SIMATS,

Saveetha Amaravathi University

CHAIRPERSON &

TRUSTEE

2 Mrs. SARASWATHI VEERAIYAN,

Vice President - SMET, TRUSTEE

3 Dr. DEEPAK NALLUSAMY,

Director – Saveetha Dental College TRUSTEE

4 Mrs. RAMYA DEEPAK,

Director – Saveetha School of Engineering, TRUSTEE

5 Dr. V. SAVEETHA RAJESH,

Director – Saveetha Medical College and Hospital, TRUSTEE

6 Dr. S. RAJESH,

Director – Saveetha Engineering College, TRUSTEE

7 Dr. R. SENTHIL KUMAR

Vice-Principal, Saveetha Engineering College

SENIOR FACULTY

MEMBER

8 Dr. S. DHANDAPANI

Deputy Head – ECE, Saveetha Engineering College

SENIOR FACULTY

MEMBER

9 Dr. P. NARAYANASAMY,

Retired Dean, CEG, Anna University, Chennai. EDUCATIONALIST

10

Prof. SHASHI PRAKASH

Head - Department of Applied Sciences,

Institute of Engineering & Technology,

Devi Ahilya Vishwavidyalaya, Khandawa Road,

Indore – 452 001, Madhya Pradesh

UGC NOMINEE

11

Dr. N. RAJESWARI

Professor, Department of Printing Technology

CEG Campus, Anna University, Chennai- 600 025

ANNA UNIVERSITY

NOMINEE

12 DR. R. RAMESH

Principal, Saveetha Engineering College.

MEMBER

SECRETARY


ANNA UNIVERSITY, CHENNAI

REGULATIONS 2013

(Common to all B.E./B.Tech. Degree (8 Semesters) Full – Time Programmes of Affiliated

Institutions)

CREDIT SYSTEM

AFFILIATED COLLEGES

DEGREE OF BACHELOR OF ENGINEERING / BACHELOR OF

TECHNOLOGY

This Regulation is applicable to the students admitted to B.E/B.Tech. Programmes at all

Engineering Colleges affiliated to Anna University, Chennai (other than Autonomous

Colleges) and to all the University Colleges of Engineering of Anna University, Chennai

from the academic year 2013-2014.

1. PRELIMINARY DEFINITIONS AND NOMENCLATURE

In these Regulations, unless the context otherwise requires:

I. “Programme” means Degree Programme, that is B.E./B.Tech. Degree

Programme.

II. “Discipline” means specialization or branch of B.E./B.Tech. Degree

Programme, like Civil Engineering, Textile Technology, etc.

III. “Course” means a theory or practical subject that is normally studied in a

semester, like Mathematics, Physics, etc.

IV. “Director, Academic Courses” means the authority of the University who is

responsible for all academic activities of the Academic Programmes for

implementation of relevant rules of this Regulation pertaining to the Academic

Programmes.

V. “Head of the Institution” means the Principal of the College.

VI. “Chairman” means the Head of the Faculty.

VII. “Head of the Department” means head of the Department concerned.

VIII. “Controller of Examinations” means the authority of the University who is

responsible for all activities of the University Examinations.

IX. “University” means ANNA UNIVERSITY, CHENNAI.


2. ADMISSION

2.1 Candidates seeking admission to the first semester of the eight semester B.E.

/ B.Tech. Degree Programme:

Should have passed the Higher Secondary Examinations of (10 +2)

Curriculum(Academic Stream) prescribed by the Government of Tamil Nadu with

Mathematics, Physics and Chemistry as three of the four subjects of study under

Part-III or any examination of any other University or authority accepted by the

Syndicate of Anna University as equivalent thereto.

(OR)

Should have passed the Higher Secondary Examination of Vocational stream

(Vocational groups in Engineering / Technology) as prescribed by the Government

of Tamil Nadu.

2.2 Lateral entry admission

(i) The candidates who possess the Diploma in Engineering / Technology

awarded by the State Board of Technical Education, Tamilnadu or its equivalent are

eligible to apply for Lateral entry admission to the third semester of B.E. / B.Tech.

in the branch corresponding to the branch of study.

(OR)

(ii) The candidates who possess the Degree in Science (B.Sc.,) (10+2+3 stream)

with Mathematics as a subject at the B.Sc. Level are eligible to apply for Lateral entry

admission to the third semester of B.E. / B.Tech.

Such candidates shall undergo two additional Engineering subject(s) in the third and

fourth semesters as prescribed by the University.

3. PROGRAMMES OFFERED

B.E./B.Tech. Programmes under the Faculty of Civil Engineering, Faculty of

Mechanical Engineering, Faculty of Electrical Engineering, Faculty of Information

and Communication Engineering and Faculty of Technology.


4. STRUCTURE OF PROGRAMMES

4.1 Every Programme will have curricula with syllabi consisting of theory and practical

courses such as:

(i) General core courses comprising Mathematics, Basic sciences, Engineering

sciences, Humanities and Management.

(ii) Core courses of Engineering/Technology.

(iii) Elective courses for specialization in related fields.

(iv) Workshop Practice, Computer Practice, Engineering Graphics, Laboratory

work, Industrial Training, Seminar presentation, Project work, Educational

tours, Camps etc.

(v) NCC / NSS / NSO / YRC activities for character development

There shall be a certain minimum number of core courses and sufficient number of

elective courses that can be opted by the students. The blend of different courses

shall be so designed that the student, at the end of the programme, would have been

trained not only in his / her relevant professional field but also would have

developed as a socially conscious human being.

4.2 Each course is normally assigned a certain number of credits with 1 credit per lecture

period per week, 1 credit per tutorial period per week, 1 credit for 2 periods of

laboratory or practical or seminar or project work per week (2 credits for 3 or 4

periods of practical).

4.3 Each semester curriculum shall normally have a blend of lecture courses not

exceeding 7 and practical courses not exceeding 4. However, the total number of

courses per semester shall not exceed 10.

4.4 For the award of the degree, a student has to earn certain minimum total number of

credits specified in the curriculum of the relevant branch of study.

4.5 The medium of instruction is English for all courses, examinations, seminar

presentations and project / thesis / dissertation reports except for the programmes

offered in Tamil Medium.

5. DURATION OF THE PROGRAMME

5.1 A student is ordinarily expected to complete the B.E. / B.Tech. Programmein8

semesters (four academic years) but in any case not more than 14 Semesters for HSC


(or equivalent) candidates and not more than 12 semesters for Lateral Entry

Candidates.

5.2 Each semester shall normally consist of 90 working days or 450 periods of 50

minutes

each. The Head of the Institution shall ensure that every teacher imparts instruction

as per the number of periods specified in the syllabus and that the teacher teaches

the full content of the specified syllabus for the course being taught.

5.3 The Head of the Institution may conduct additional classes for improvement, special

coaching, conduct of model test etc., over and above the specified periods. But for

the purpose of calculation of attendance requirement or writing the end semester

examinations (as per clause 6) by the students, 450 periods conducted within the

specified academic schedule, including additional classes if any, shall be taken into

account and the overall percentage of attendance shall be calculated accordingly. For

example, if an institution conducts 540 periods in a semester, the actual number of

periods attended by a student for 540 periods should be the numerator and 450

periods should be the denominator for computing the attendance performance of

that candidate (subject to a maximum of 100%).

The University Examination will ordinarily follow immediately after the last working

day of the semester commencing from I semester as per the academic schedule

prescribed from time to time.

5.4 The total period for completion of the programme reckoned from the

commencement of the first semester to which the candidate was admitted shall not

exceed the maximum period specified in clause 5.1 irrespective of the period of break

of study (vide clause 18.4) in order that he/she may be eligible for the award of the

degree (vide clause 15).

6. ATTENDANCE REQUIREMENTS FOR COMPLETION OF THE

SEMESTER

6.1 A Candidate who has fulfilled the following conditions shall be deemed to have

satisfied the requirements for completion of a semester.


Ideally every student is expected to attend all classes and secure 100% attendance.

However, in order to give provision for certain unavoidable reasons such as Medical

/ participation in sports, the student is expected to attend atleast 75% of the classes.

Therefore, he/she shall secure not less than 75% (after rounding off to the nearest

integer) of overall attendance taking into account the total number of 450 periods in

a semester within 90 working days in all courses put together attended by the

candidate as against the total number of periods in all courses offered during the

semester (vide clause 5.3)

6.2 However, a candidate who secures overall attendance between 65% and 74% in the

current semester due to medical reasons (prolonged hospitalization / accident /

specific illness) / Participation in Sports events may be permitted to appear for the

current semester examinations subject to the condition that the candidate shall

submit the medical certificate / sports participation certificate attested by the Head

of the Institution. The same shall be forwarded to the Controller of Examinations

for record purposes.

Candidates who secure less than 65% overall attendance and candidates who do not

satisfy theclause 6.1 and 6.2 shall not be permitted to write the University

examination at the end of thesemester and not permitted to move to the next

semester. They are required to repeat the incomplete semester in the next academic

year, as per the norms prescribed.

7. CLASS ADVISOR

There shall be a class advisor for each class. The class advisor will be one among the

(course-instructors) of the class. He / She will be appointed by the HOD of the

department concerned. The class advisor is the ex-officio member and the Convener

of the class committee. The responsibilities for the class advisor shall be:

To act as the channel of communication between the HOD and the students of the

respective class.

To collect and maintain various statistical details of students.

To help the chairperson of the class committee in planning and conduct of the class

committee meetings.


To monitor the academic performance of the students including attendance and to

inform the class committee.

To attend to the students‟ welfare activities like awards, medals, scholarships and

industrial visits.

8. CLASS COMMITTEE

8.1. Every class shall have a class committee consisting of teachers of the class

concerned, student representatives and a chairperson who is not teaching the class. It

is like the

“Quality Circle” (more commonly used in industries) with the overall goal of

improving the teaching-learning process. The functions of the class committee

include

Solving problems experienced by students in the class room and in the laboratories.

Clarifying the regulations of the degree Programme and the details of rules

therein particularly (clause 5 and 6) which should be displayed on college

Notice-Board.

Informing the student representatives, the academic schedule including the dates of

assessments and the syllabus coverage for each assessment.

In the case of practical courses (laboratory / drawing / project work / seminar etc.)

the breakup of marks for each experiment / exercise / module of work, should be

clearly discussed in the class committee meeting and informed to the students.

Analyzing the performance of the students of the class after each test and finding the

ways and means of solving problems, if any.

Identifying the weak students, if any, and requesting the teachers concerned to

provide some additional help or guidance or coaching to such weak students.

8.2 The class committee for a class under a particular branch is normally constituted by

the Head of the Department. However, if the students of different branches are

mixed in a class (like the first semester which is generally common to all branches),

the class committee is to be constituted by the Head of the Institution.

8.3 The class committee shall be constituted within the first week of each semester.

8.4 At least 4 student representatives (usually 2 boys and 2 girls) shall be included in the

class committee.


8.5 The Chairperson of the class committee may invite the Class adviser(s) and the Head

of the Department to the class committee meeting.

8.6 The Head of the Institution may participate in any class committee of the institution.

8.7 The chairperson is required to prepare the minutes of every meeting, submit the

same to Head of the Institution within two days of the meeting and arrange to

circulate it among the students and teachers concerned. If there are some points in

the minutes requiring action by the management, the same shall be brought to the

notice of the Management by the Head of the Institution.

8.8 The first meeting of the class committee shall be held within one week from the date

of commencement of the semester, in order to inform the students about the nature

and weightage of assessments within the framework of the Regulations. Two or three

subsequent meetings may be held in a semester at suitable intervals. The Class

Committee Chairman shall put on the Notice Board the cumulative

attendance particulars of each student at the end of every such meeting to

enable the students to know their attendance details to satisfy the clause 6 of

this Regulation. During these meetings the student members representing the

entire class, shall meaningfully interact and express the opinions and suggestions of

the other students of the class in order to improve the effectiveness of the teaching-

learning process.

9. COURSE COMMITTEE FOR COMMON COURSES

Each common theory course offered to more than one discipline or group, shall

have a “Course Committee” comprising all the teachers teaching the common

course with one of them nominated as Course Coordinator. The nomination of the

Course Coordinator shall be made by the Head of the Department / Head of the

Institution depending upon whether all the teachers teaching the common course

belong to a single department or to several departments. The „Course committee‟

shall meet in order to arrive at a common scheme of evaluation for the test and shall

ensure a uniform evaluation of the tests. Wherever feasible, the course committee

may also prepare a common question paper for the internal assessment test(s).


10. SYSTEM OF EXAMINATION

10.1 Performance in each course of study shall be evaluated based on (i) continuous

internal assessment throughout the semester and (ii) University examination at the

end of the semester.

10.2 Each course, both theory and practical (including project work & viva voce

Examinations) shall be evaluated for a maximum of 100 marks.

For all theory and practical courses including project work, the continuous internal

assessment will carry 20 marks while the End - Semester University examination

will carry 80 marks.

10.3 Industrial training and seminar shall carry 100 marks and shall be evaluated

through internal assessment only.

10.4 The University examination (theory and practical) of 3 hours duration shall

ordinarily be conducted between October and December during the odd semesters

and between April and June during the even semesters.

10.5 The University examination for project work shall consist of evaluation of the final

report submitted by the student or students of the project group (of not exceeding

4 students) by an external examiner and an internal examiner, followed by a viva-

voce examination conducted separately for each student by a committee consisting

of the external examiner, the supervisor of the project group and an internal

examiner.

10.6 For the University examination in both theory and practical courses including

project work the internal and external examiners shall be appointed by the

Controller of Examinations.

11. PROCEDURE FOR AWARDING MARKS FOR INTERNAL ASSESSMENT

For all theory and practical courses (including project work) the continuous

assessment shall be for a maximum of 20 marks. The above continuous assessment

shall be awarded as per the procedure given below:

11.1. (a) Theory Courses


(b) Three tests each carrying 100 marks shall be conducted during the semester

by the Department / College concerned. The total marks obtained in all tests

put together out of 300, shall be proportionately reduced for 20 marks and

rounded to the nearest integer (This also implies equal weightage to all the

three tests). Practical Courses:

The maximum marks for Internal Assessment shall be 20 in case of practical

courses. Every practical exercise / experiment shall be evaluated based on

conduct of experiment / exercise and records maintained. There shall be at

least one test. The criteria for arriving at the Internal Assessment marks of 20

is as follows: 75 marks shall be awarded for successful completion of all the

prescribed experiments done in the Laboratory and 25 marks for the test.

The total mark shall be reduced to 20 and rounded to the nearest integer.

(c) Theory Courses with Laboratory Component:

If there is a theory course with Laboratory component, there shall be three

tests: the first two tests (each 100 marks) will be from theory portions and

the third test (maximum mark 100) will be for laboratory component. The

sum of marks of first two tests shall be reduced to 60 marks and the third

test mark shall be reduced to 40 marks. The sum of these 100 marks may

then be arrived at for 20 and rounded to the nearest integer.

11.2 (a) The seminar / Case study is to be considered as purely INTERNAL (with

100% internal marks only). Every student is expected to present a minimum

of 2 seminars per semester before the evaluation committee and for each

seminar, marks can be equally apportioned. The three member committee

appointed by Head of the Institution will evaluate the seminar and at the end

of the semester the marks can be consolidated and taken as the final mark.

The evaluation shall be based on the seminar paper (40%), presentation

(40%) and response to the questions asked during presentation (20%).

11.2 (b) The Industrial / Practical Training, Summer Project, Internship shall carry

100 marks and shall be evaluated through internal assessment only. At the

end of Industrial / Practical training / internship / Summer Project, the


candidate shall submit a certificate from the organization where he / she has

undergone training and a brief report. The evaluation will be made based on

this report and a Viva-Voce Examination, conducted internally by a three

member Departmental Committee constituted by the Head of the

Institution. The certificates (issued by the organization) submitted by the

students shall be attached to the mark list sent by the Head of the Institution

to the Controller of Examinations.

Project Work:

Project work may be allotted to a single student or to a group of students

not exceeding 4 per group.

The Head of the Institutions shall constitute a review committee for project

work for each branch of study. There shall be three reviews during the

semester by the review committee. The student shall make presentation on

the progress made by him / her before the committee. The total marks

obtained in the three reviews shall be reduced for 20 marks and rounded to

the nearest integer (as per the scheme given in 11.3.1).

11.3.1 The project report shall carry a maximum 30 marks. The project report shall

be submitted as per the approved guidelines as given by Director, Academic

Courses. Same mark shall be awarded to every student within the project

group for the project report. The viva-voce examination shall carry 50 marks.

Marks are awarded to each student of the project group based on the

individual performance in the viva-voce examination.

11.3.2

Review

Review

Review

End Semester Examinations

I II III Thesis

Submission (30) Viva-Voce (50)

5 7.5 7.5

Internal

External

Internal

External

Supervisor

15 15 15 20 15


11.3.3 If a candidate fails to submit the project report on or before the specified

deadline, he/she is deemed to have failed in the Project Work and shall re-

enroll for the same in a subsequent semester.

11.4 Internal marks approved by the Head of the Institution shall be displayed by the

respective HODs within 5 days from the last working day.

11.5 Attendance Record

Every teacher is required to maintain an 'ATTENDANCE AND

ASSESSMENT RECORD' which consists of attendance marked in each lecture

or practical or project work class, the test marks and the record of class work

(topic covered), separately for each course. This should be submitted to the

Head of the department periodically (at least three times in a semester) for

checking the syllabus coverage and the records of test marks and attendance.

The Head of the department will put his signature and date after due

verification. At the end of the semester, the record should be verified by the

Head of the Institution who will keep this document in safe custody (for five

years). The University or any inspection team appointed by the University may

verify the records of attendance and assessment of both current and previous

semesters.

12. REQUIREMENTS FOR APPEARING FOR UNIVERSITY EXAMINATIONS

A candidate shall normally be permitted to appear for the University

Examinations of the current semester if he/she has satisfied the semester

completion requirements (subject to Clause 6) and has registered for

examination in all courses of the semester. Registration is mandatory for current

semester examinations as well as arrear examinations, failing which the

candidate will not be permitted to move to the higher semester.

A candidate who has already appeared for any subject in a semester and passed the

examination is not entitled to reappear in the same subject for improvement of

grades.


13. PASSING REQUIREMENTS

13.1 A candidate who secures not less than 50% of total marks prescribed for the

course [Internal Assessment + End semester University Examinations] with a

minimum of 45% of the marks prescribed for the end-semester University

Examination, shall be declared to have passed the course and acquired the relevant

number of credits. This is applicable for both theory and practical courses

(including project work).

13.2 If a candidate fails to secure a pass in a particular course, it is mandatory that

he/she shall register and reappear for the examination in that course during the

subsequent semester when examination is conducted in that course; he/she should

continue to register and reappear for the examinations in the failed subjects till he

/ she secures a pass.

13.3 The internal assessment marks obtained by the candidate in the first appearance

shall be retained and considered valid for all subsequent attempts till the candidate

secure a pass. However, from the third attempt onwards if a candidate fails to

obtain pass marks (IA + End Semester Examination) as per clause 13.1, then the

candidate shall be declared to have passed the examination if he/she secure a

minimum of 50% marks prescribed for the university end semester examinations

alone.

14. AWARD OF LETTER GRADES

14.1.1 All assessments of a course will be done on absolute marks basis. However, for

the purpose of reporting the performance of a candidate, letter grades, each

carrying certain number of points, will be awarded as per the range of total marks

(out of 100) obtained by the candidate in each subject as detailed below:

Letter Grade Grade Points Marks Range

S 10 91 –100

A 9 81 –90

B 8 71 –80

C 7 61 –70

D 6 57 –60

E 5 50 –56

U 0 < 50(or ≥ 50 but not satisfying clause13.1)

W 0


A student is deemed to have passed and acquired the corresponding credits in a

particular course if he/she obtains any one of the following grades: “S”, “A”, “B”,

“C”, “D”, “E”.

“SA” denotes shortage of attendance (as per clause 6.3) and hence prevention

from writing the end semester examination. “SA” will appear only in the result

sheet.

“U” denotes Reappearance (RA) is required for the examination in the

course.“W”denotes withdrawal from the exam for the particular course. (The

grades U and W will figure both in Marks Sheet as well as in Result Sheet)

GRADE SHEET

After results are declared, Grade Sheets will be issued to each student which will contain the

following details:

The college in which the candidate has studied

The list of courses enrolled during the semester and the grade scored. The Grade

Point Average (GPA) for the semester and

The Cumulative Grade Point Average (CGPA) of all courses enrolled from first

semester onwards.

GPA for a semester is the ratio of the sum of the products of the number of credits for

courses acquired and the corresponding points to the sum of the number of credits for

the courses acquired in the semester.

CGPA will be calculated in a similar manner, considering all the courses registered from first

semester. “U”, and “W” grades will be excluded for calculating GPA and CGPA.

GPA/CGPA = ∑

∑

where is the number of Credits assigned to the course, is the point corresponding

to the grade obtained for each course and n is number of all courses successfully cleared

during the particular semester in the case of GPA and during all the semesters in the case of

CGPA.


15. ELIGIBILITY FOR THE AWARD OF THE DEGREE

15.1 A student shall be declared to be eligible for the award of the Degree if

he/she has

Successfully gained the required number of total credits as specified in the

Curriculum corresponding to his/her Programme within the stipulated time.

No disciplinary action is pending against him/her.

The award of the degree must be approved by the Syndicate.

Successfully completed any additional courses prescribed by the Director,

Academic Courses, whenever any candidate is readmitted under Regulations other

than R – 2013 (clause 18.2).

16. CLASSIFICATION OF THE DEGREE AWARDED

16.1 FIRST CLASS WITH DISTINCTION

A candidate who satisfies the following conditions shall be declared to have passed

the examination in First class with Distinction.

Should have passed the End semester examination in all the courses of all the

eight semesters (six semesters in the case of lateral entry) in his/her First

Appearance within four years (three years in the case of lateral entry). Withdrawal

from examination (vide Clause 17) will not be considered as an appearance. One

year authorized break of study (if availed of) is permitted in addition to four years

(three years in the case of lateral entry) for award of First class with Distinction.

Should have secured a CGPA of not less than 8.50.

16.2 FIRST CLASS

A candidate who satisfies the following conditions shall be declared to have passed

the examination in First class.

Should have passed the End semester examination in all the courses of all the

eight semesters (six semesters in the case of lateral entry) within five years (four

years in the case of lateral entry). One year authorized break of study (if availed

of) or prevention from writing the End Semester examination due to lack of

attendance (if applicable) is included in the duration of five years (four years in

the case of lateral entry) for award of First class.



16.3 SECOND CLASS

All other candidates (not covered in clauses 16.1 and 16.2) who qualify for the

award of the degree (vide Clause 15) shall be declared to have passed the

examination inSecond Class.

16.4 A candidate who is absent in semester examination in a course / project work

after having registered for the same shall be considered to have appeared in that

examination for the purpose of classification. (subject to clause 17 and 18)

16.5 Revaluation

A candidate can apply for revaluation / photocopy of his/her semester

examination answer paper in a theory course, within 2 weeks from the declaration

of results, on payment of a prescribed fee through proper application to the

Controller of Examinations through the Head of Institutions. The Controller of

Examinations will arrange for the revaluation and the results will be intimated to

the candidate concerned through the Head of the Institutions. Revaluation is not

permitted for practical courses and for project work.

A candidate can apply for revaluation of answer scripts for not exceeding 5

subjects at a time.

16.6 Review

Candidates not satisfied with Revaluation can apply for Review of his/ her

examination answer paper in a theory course, within the prescribed date on

payment of a prescribed fee through proper application to Controller of

Examination through the Head of the Institution.

Candidates applying for Photocopy-cum-Revaluation only are eligible to apply for

Review.

17. PROVISION FOR WITHDRAWAL FROM END-SEMESTER

EXAMINATION

17.1 A candidate, may for valid reasons and on prior application, is granted permission

to withdraw from appearing for the examination of any one course or consecutive

examinations of more than one course in a semester examination.

17.2 Such withdrawal shall be permitted only once during the entire period of study of

the degree programme.


17.3 Withdrawal application is valid only if it is made within 10 days prior to the

Commencement of the examination in that course or courses and recommended

by the Head of the Institution and approved by the Controller of Examinations.

17.3.1 Notwithstanding the requirement of mandatory TEN days’ notice,

applications for withdrawal for special cases under extraordinary

conditions will be considered on the merit of the case.

17.4 Withdrawal shall not be construed as an appearance for the eligibility of a

candidate for First Class with Distinction.

17.5 Withdrawal from the End Semester Examination is NOT applicable to arrears

subjects of previous semesters.

17.6 The candidate shall reappear for the withdrawn courses during the examination

conducted in the subsequent semester.

17.7 Withdrawal shall not be permitted after the final semester examinations.

18. PROVISION FOR AUTHORISED BREAK OF STUDY

18.1 Break of Study shall be granted only once for valid reasons for a maximum of one

year during the entire period of study of the degree programme. However, in

extraordinary situation the candidate may apply for additional break of study not

exceeding another one year by paying prescribed fee for break of study. If a

candidate intends to temporarily discontinue the programme in the middle of the

semester for valid reasons, and to rejoin the programme in a subsequent year,

permission may be granted based on the merits of the case provided he / she

applies to the Director, Student Affairs in advance, but not later than the last date

for registering for the end semester examination of the semester in question,

through the Head of the Institution stating the reasons therefore and the probable

date of rejoining the programme.

18.2 The candidates permitted to rejoin the programme after break of study /

prevention due to lack of attendance, shall be governed by the Curriculum and

Regulations in force at the time of rejoining. The students rejoining in new

Regulations shall apply to the Director, Academic Courses in the prescribed

format through Head of the Institution for prescribed additional courses, if any, at


the beginning of the readmitted semester itself, so as to compensate for the

shortage of the credits.

18.3 The authorized break of study will not be counted towards the duration specified

for passing all the courses for the purpose of classification (vide Clause 16.1). The

total period for completion of the Programme reckoned from, the

commencement of the first semester to which the candidate was admitted shall

not exceed the maximum period specified in clause 5.1 irrespective of the period

of break of study in order that he/she may be eligible for the award of the degree.

If any student is prevented for want of required attendance, the period of

prevention shall not be considered as authorized, “Break of Study”(Clause 18.1).

19. INDUSTRIAL VISIT

Every student is required to undergo one Industrial visit for every theory course offered,

starting from the third semester of the Programme. Every teacher shall take the students

at least for one industrial visit in a semester.

20. PERSONALITY AND CHARACTER DEVELOPMENT

All students shall enroll, on admission, in any one of the personality and character

development programmes (the NCC / NSS / NSO / YRC) and undergo training for

about 80 hours and attend a camp of about seven days. The training shall include classes

on hygiene and health awareness and also training in first-aid.

National Cadet Corps (NCC) will have about 20 parades.

National Service Scheme (NSS) will have social service activities in and around

the College / Institution.

National Sports Organization (NSO) will have sports, Games, Drills and Physical

exercises

Youth Red Cross (YRC) will have activities related to social services in and around

college/ institutions.

While the training activities will normally be during weekends, the camp will normally be

during vacation period.

Every student shall put in a minimum of 75% attendance in the training and attend the

camp compulsorily. The training and camp shall be completed during the first year of


the programme. However, for valid reasons, the Head of the Institution may permit a

student to complete this requirement in the second year.

21. DISCIPLINE

Every student is required to observe disciplined and decorous behavior both inside and

outside the college and not to indulge in any activity which will tend to bring down the

prestige of the University / College. The Head of Institution shall constitute a

disciplinary committee consisting of Head of Institution, Two Heads of Department of

which one should be from the faculty of the student, to enquire into acts of indiscipline

and notify the University about the disciplinary action recommended for approval. In

case of any serious disciplinary action which leads to suspension or dismissal, then a

committee shall be constituted including one representative from Anna University,

Chennai. In this regard, the member will be nominated by the University on getting

information from the Head of the Institution.

If a student indulges in malpractice in any of the University / internal examination he /

she shall be liable for punitive action as prescribed by the University from time to time.

22. REVISION OF REGULATION, CURRICULUM AND SYLLABUS

The University may from time to time revise, amend or change the Regulations, scheme

of examinations and syllabi if found necessary.



REGULATIONS 2017

Common to all B.E. / B.Tech. Full-Time Programmes (For the students admitted to B.E. / B.Tech.

Programme at various Affiliated Institutions)

CHOICE BASED CREDIT SYSTEM

AFFILIATED COLLEGES

DEGREE OF BACHELOR OF ENGINEERING / BACHELOR OF

TECHNOLOGY

This Regulation is applicable to the students admitted to B.E/B.Tech. Programmes at all

Engineering Colleges affiliated to Anna University, Chennai (other than Autonomous

Colleges) and to all the University Colleges of Engineering of Anna University, Chennai

from the academic year 2017-2018 onwards.



I. “Programme” means Degree Programme, that is B.E./B.Tech. Degree

Programme.

II. “Discipline” means specialization or branch of B.E./B.Tech. Degree Programme,

like Civil Engineering, Textile Technology, etc.

III. “Course” means a theory or practical subject that is normally studied in a semester,

like Mathematics, Physics, etc.


responsible for all academic activities of the Academic Programmes for

implementation of relevant rules of this Regulations pertaining to the Academic

Programmes.

V. “Chairman” means the Head of the Faculty.

VI. “Head of the Institution” means the Principal of the College.

VII. “Head of the Department” means head of the Department concerned.

VIII. “Controller of Examinations” means the authority of the University who is



2. ADMISSION

2.1 Candidates seeking admission to the first semester of the eight semester B.E. /

B.Tech. Degree Programme: Should have passed the Higher Secondary

Examinations of (10+2) Curriculum (Academic Stream) prescribed by the

Government of Tamil Nadu with Mathematics, Physics and Chemistry as three of


the four subjects of study under Part-III or any examination of any other

University or authority accepted by the Syndicate of Anna University as equivalent

thereto.

(OR)


(Vocational groups in Engineering / Technology) as prescribed by the

Government of Tamil Nadu.

2.2 Lateral entry admission

(i) The candidates who possess the Diploma in Engineering / Technology

awarded by the State Board of Technical Education, Tamilnadu or its equivalent

are eligible to apply for Lateral entry admission to the third semester of B.E. /

B.Tech. in the branch corresponding to the branch of study.

(OR)

(ii)The candidates who possess the Degree in Science (B.Sc.,) (10+2+3 stream)

with Mathematics as a subject at the B.Sc. Level are eligible to apply for Lateral

entry admission to the third semester of B.E. / B.Tech. Such candidates shall

undergo two additional Engineering subject(s) in the third and fourth semesters as

prescribed by the University.


B.E. / B.Tech. Programmes under the Faculty of Civil Engineering, Faculty of

Mechanical Engineering, Faculty of Electrical Engineering, Faculty of Information

and Communication Engineering and Faculty of Technology.


4.1 Categorization of Courses Every B.E. / B. Tech. Programme will have a curriculum

with syllabi consisting of theory and practical courses that shall be categorized as

follows:

i. Humanities and Social Sciences (HS) courses include Technical English,

Engineering Ethics and Human Values, Communication skills, Environmental

Science and Engineering.


ii. Basic Sciences (BS) courses include Mathematics, Physics, Chemistry, Biology, etc.

iii. Engineering Sciences (ES) courses include Engineering practices, Engineering

Graphics, Basics of Electrical / Electronics / Mechanical / Computer Engineering,

Instrumentation etc.

iv. Professional Core (PC) courses include the core courses relevant to the chosen

specialization/branch.

v. Professional Elective (PE) courses include the elective courses relevant to the

chosen specialization/ branch.

vi. Open Elective (OE) courses include the courses from other branches which a

student can choose from the list specified in the curriculum of the students B.E. /

B. Tech. / B. Arch. Programmes.

vii. Employability Enhancement Courses (EEC) include Project Work and/or

Internship, Seminar, Professional Practices, Case Study and Industrial/Practical

Training.

4.2 Personality and Character Development

All students shall enroll, on admission, in anyone of the personality and character

development programmes (NCC/NSS/NSO/YRC) and undergo training for about

80 hours and attend a camp of about seven days. The training shall include classes

on hygiene and health awareness and also training in first-aid.

National Cadet Corps (NCC) will have about 20 parades.


the College / Institution.

National Sports Organization (NSO) will have sports, Games, Drills and

Physical exercises.

Youth Red Cross (YRC) will have activities related to social services in and

around College/Institutions. While the training activities will normally be during

weekends, the camp will normally be during vacation period.

4.3 Number of courses per semester

Each semester curriculum shall normally have a blend of lecture courses not

exceeding 7 and Laboratory courses and Employability Enhancement Course(s)

not exceeding 4. Each Employability Enhancement Course may have credits

assigned as per clause

However, the total number of courses per semester shall not exceed 10.


4.4 Credit Assignment

Each course is assigned certain number of credits based on the following:

Contact period per week CREDITS 1 Lecture Period 1 2 Tutorial Periods 1 3 Laboratory Periods (also for EEC courses like / Seminar / Project Work / Case study / etc.)

1

The Contact Periods per week for Tutorials and Practical can only be in multiples

of 2.

4.5. Industrial Training / Internship

The students may undergo Industrial training for a period as specified in the

Curriculum during summer / winter vacation. In this case the training has to be

undergone continuously for the entire period.

The students may undergo Internship at Research organization / University (after

due approval from the Department Consultative Committee) for the period

prescribed in the curriculum during summer / winter vacation, in lieu of Industrial

training.

4.6 Industrial Visit

Every student is required to go for at least one Industrial Visit every year starting

from the second year of the Programme. The Heads of Departments shall ensure

that necessary arrangements are made in this regard.

4.7 Value Added Courses

The Students may optionally undergo Value Added Courses and the credits earned

through the Value Added Courses shall be over and above the total credit

requirement prescribed in the curriculum for the award of the degree. One / Two

credit courses shall be offered by a Department of an institution with the prior

approval from the Head of the Institution. The details of the syllabus, time table

and faculty may be sent to the Centre for Academic Courses and the Controller of

Examinations after approval from the Head of the Institution concerned atleast

one month before the course is offered. Students can take a maximum of two one

credit courses / one two credit course during the entire duration of the

Programme.


4.8 Online Courses

4.8.1 Students may be permitted to credit only one online course of 3 credits with

the approval of Head of the Institution and Centre for Academic Courses.

4.8.2 Students may be permitted to credit one online course (which are provided

with certificate) subject to a maximum of three credits. The approved list of

online courses will be provided by the Centre for Academic courses from

time to time. The student needs to obtain certification or credit to become

eligible for writing the End Semester Examination to be conducted by

Controller of Examinations, Anna University. The details regarding

online courses taken up by students should be sent to the Controller of

Examinations, Anna University and Centre for Academic Courses one

month before the commencement of End Semester Examination.

4.9 The students satisfying the following conditions shall be permitted to carry out

their final semester Project work for six months in industry/research

organizations.

The student should not have current arrears and shall have CGPA of 7.50 and above.

The student shall undergo the eighth semester courses in the sixth and seventh

semesters. The Head of Department, in consultation with the faculty handling the

said courses shall forward the proposal recommended by the Head of Institution

to the Controller of Examinations through the Director, Centre for Academic

courses for approval at least 4 weeks before the commencement of the sixth

semester of the programme for approval.

4.10 Medium of Instruction The medium of instruction is English for all courses,

examinations, seminar presentations and project / thesis / dissertation reports

except for the programmes offered in Tamil Medium.


5.1 A student is ordinarily expected to complete the B.E. / B.Tech. Programme in 8

semesters (four academic years) but in any case not more than 14 Semesters for

HSC (or equivalent) candidates and not more than 12 semesters for Lateral Entry

Candidates.


5.1.1 A student is ordinarily expected to complete the B.E. Mechanical

Engineering (Sandwich) Programme in 10 semesters (five academic years)

but in any case not more than 18 Semesters for HSC (or equivalent)

candidates.


minutes each. The Head of the Institution shall ensure that every teacher imparts

instruction as per the number of periods specified in the syllabus and that the

teacher teaches the full content of the specified syllabus for the course being

taught.

5.3 The Head of the Institution may conduct additional classes for improvement,

special coaching, conduct of model test etc., over and above the specified periods.

But for the purpose of calculation of attendance requirement for writing the end

semester examinations (as per clause 6) by the students, following method shall be

used.

(

)

The University Examination will ordinarily follow immediately after the last working day of

the semester commencing from I semester as per the academic schedule prescribed from

time to time.



exceed the maximum period specified in clause 5.1 irrespective of the period of

break of study (vide clause 18) in order that he/she may be eligible for the award

of the degree (vide clause 16).

6. COURSE REGISTRATION

6.1 The Institution is responsible for registering the courses that each student is

proposing to undergo in the ensuing semester. Each student has to register for all

courses to be undergone in the curriculum of a particular semester (with the facility

to drop courses to a maximum of 6 credits (vide clause 6.5). The student can also

register for courses for which the student has failed in the earlier semesters. In

such cases the student shall do reappearance registration for those courses for


which the attendance requirement is not compulsory. However, the student have

the option to take up some other professional elective or open elective that he has

failed to pass. But, the total number of credits that a student is allowed to register

per semester cannot exceed 36. The registration details of the candidates may be

approved by the Head of the Institution and forwarded to the Controller of

Examinations. This registration is for undergoing the course as well as for writing

the End Semester Examinations. No course shall be offered by any department of

any institution unless a minimum 10 students register for the course.

The courses that a student registers in a particular semester may include

i. Courses of the current semester.

ii. The core (Theory/Lab /EEC) courses that the student has not cleared in the

previous semesters.

iii. Elective courses which the student failed (either the same elective or a different

elective instead)

6.2 Flexibility to Drop courses

6.2.1 A student has to earn the total number of credits specified in the curriculum

of the respective Programme of study in order to be eligible to obtain the

degree.

6.2.2 From the III to final semesters, the student has the option of dropping

existing courses in a semester during registration. Total number of credits

of such courses cannot exceed 6.

6.2.3 The student shall register for the project work in the final semester only.

7. ATTENDANCE REQUIREMENTS FOR COMPLETION OF THE

SEMESTER

7.1 A Candidate who has fulfilled the following conditions shall be deemed to have

satisfied the requirements for completion of a semester.

Ideally every student is expected to attend all classes of all the courses and secure

100% attendance. However, in order to give provision for certain unavoidable

reasons such as Medical / participation in sports, the student is expected to attend

atleast 75% of the classes.


Therefore, he/she shall secure not less than 75% (after rounding off to the nearest

integer) of overall attendance as calculated as per clause 5.3.

7.2 However, a candidate who secures overall attendance between 65% and 74% in the


specific illness) / Participation in Sports events may be permitted to appear for the

current semester examinations subject to the condition that the candidate shall

submit the medical certificate / sports participation certificate attested by the Head

of the Institution. The same shall be forwarded to the Controller of Examinations

for record purposes.

7.3 Candidates who secure less than 65% overall attendance and candidates who do

not satisfy the clause 7.1 and 7.2 shall not be permitted to write the University

examination at the end of the semester and not permitted to move to the next

semester. They are required to repeat the incomplete semester in the next academic

year, as per the norms prescribed.

8. CLASS ADVISOR

There shall be a class advisor for each class. The class advisor will be one among

the (course-instructors) of the class. He / She will be appointed by the HoD of the

department concerned. The class advisor is the ex-officio member and the

Convener of the class committee. The responsibilities for the class advisor shall be:

To act as the channel of communication between the HoD and the students of the

respective class.


To help the chairperson of the class committee in planning and conduct of the

class committee meetings.



To attend to the students’ welfare activities like awards, medals, scholarships and

industrial visits.

9. CLASS COMMITTEE

9.1. Every class shall have a class committee consisting of teachers of the class

concerned, student representatives and a chairperson who is not teaching the class.

It is like the ‘Quality Circle’ (more commonly used in industries) with the overall


goal of improving the teaching-learning process. The functions of the class

committee include

Solving problems experienced by students in the class room and in the

laboratories.

Clarifying the regulations of the degree programme and the details of rules therein

particularly (clause 5 and 7) which should be displayed on college Notice-Board.

Informing the student representatives, the academic schedule including the dates

of assessments and the syllabus coverage for each assessment.

Informing the student representatives the details of Regulations regarding

weightage used for each assessment. In the case of practical courses (laboratory /

drawing / project work / seminar etc.) the breakup of marks for each experiment

/ exercise / module of work, should be clearly discussed in the class committee

meeting and informed to the students.

Analyzing the performance of the students of the class after each test and finding

the ways and means of solving problems, if any.

Identifying the weak students, if any, and requesting the teachers concerned to

provide some additional help or guidance or coaching to such weak students.

9.2 The class committee for a class under a particular branch is normally constituted

by the Head of the Department. However, if the students of different branches are

mixed in a class (like the first semester which is generally common to all branches),

the class committee is to be constituted by the Head of the Institution.

9.3 The class committee shall be constituted within the first week of each semester.

9.4 At least 4 student representatives (usually 2 boys and 2 girls) shall be included in

the

9.5 The Chairperson of the class committee may invite the Class adviser(s) and the

Head of the Department to the class committee meeting.

9.6 The Head of the Institution may participate in any class committee of the

institution.


same to Head of the Institution within two days of the meeting and arrange to

circulate it among the students and teachers concerned. If there are some points in

the minutes requiring action by the management, the same shall be brought to the

notice of the Management by the Head of the Institution.

9.8 The first meeting of the class committee shall be held within one week from the

date of commencement of the semester, in order to inform the students about the


nature and weightage of assessments within the framework of the Regulations.

Two or three subsequent meetings may be held in a semester at suitable intervals.

The Class Committee Chairman shall put on the Notice Board the cumulative

attendance particulars of each student at the end of every such meeting to enable

the students to know their attendance details to satisfy the clause 6 of this

Regulation. During these meetings the student members representing the entire

class, shall meaningfully interact and express the opinions and suggestions of the

other students of the class in order to improve the effectiveness of the teaching-

learning process.


Each common theory course offered to more than one discipline or group, shall

have a “Course Committee” comprising all the teachers teaching the common

course with one of them nominated as Course Coordinator. The nomination of

the Course Coordinator shall be made by the Head of the Department / Head of

the Institution depending upon whether all the teachers teaching the common

course belong to a single department or to several departments. The ‘Course

committee’ shall meet in order to arrive at a common scheme of evaluation for the

test and shall ensure a uniform evaluation of the tests. Wherever feasible, the

course committee may also prepare a common question paper for the internal

assessment test(s).


11.1 Performance in each course of study shall be evaluated based on (i) continuous

internal assessment throughout the semester and (ii) University examination at the

end of the semester.

11.2 Each course, both theory and practical (including project work & viva voce

Examinations) shall be evaluated for a maximum of 100 marks.

For all theory and practical courses including project work, the continuous internal

assessment will carry 20 marks while the End - Semester University examination

will carry 80 marks.

11.3 Industrial training and seminar shall carry 100 marks and shall be evaluated



11.4 The University examination (theory and practical) of 3 hours duration shall



11.5 The University examination for project work shall consist of evaluation of the final

report submitted by the student or students of the project group (of not exceeding

4 students) by an external examiner and an internal examiner, followed by a viva-

voce examination conducted separately for each student by a committee consisting

of the external examiner, the supervisor of the project group and an internal

examiner.

11.6 For the University examination in both theory and practical courses including




For all theory and practical courses (including project work) the continuous

assessment shall be for a maximum of 20 marks. The above continuous

assessment shall be awarded as per the procedure given below:

12.1 THEORY COURSES

Three tests each carrying 100 marks shall be conducted during the semester by the

Department / College concerned. The total marks obtained in all tests put

together out of 300, shall be proportionately reduced for 20 marks and rounded to

the nearest integer (This also implies equal weightage to all the three tests).

12.2 LABORATORY COURSES

The maximum marks for Internal Assessment shall be 20 in case of practical

courses. Every practical exercise / experiment shall be evaluated based on conduct

of experiment / exercise and records maintained. There shall be at least one test.

The criteria for arriving at the Internal Assessment marks of 20 is as follows: 75

marks shall be awarded for successful completion of all the prescribed experiments

done in the Laboratory and 25 marks for the test. The total mark shall be reduced

to 20 and rounded to the nearest integer.


12.3 THEORY COURSES WITH LABORATORY COMPONENT

If there is a theory course with Laboratory component, there shall be three tests:

the first two tests (each 100 marks) will be from theory portions and the third test

(maximum mark 100) will be for laboratory component. The sum of marks of first

two tests shall be reduced to 60 marks and the third test mark shall be reduced to

40 marks. The sum of these 100 marks may then be arrived at for 20 and rounded

to the nearest integer.

12.4 PROJECT WORK

Project work may be allotted to a single student or to a group of students not

exceeding 4 per group.

The Head of the Institutions shall constitute a review committee for project work

for each branch of study. There shall be three reviews during the semester by the

review committee. The student shall make presentation on the progress made by

him / her before the committee. The total marks obtained in the three reviews

shall be reduced for 20 marks and rounded to the nearest integer (as per the

scheme given in 12.4.1).

12.4.1 The project report shall carry a maximum 30 marks. The project report

shall be submitted asper the approved guidelines as given by Director,

Academic Courses. Same mark shall be awarded to every student within the

project group for the project report. The viva-voce examination shall carry

50 marks. Marks are awarded to each student of the project group based on

the individual performance in the viva-voce examination.

Review

Review

Review

End Semester Examinations

I II III Thesis

Submission (30) Viva-Voce (50)

5 7.5 7.5

Internal

External

Internal

External

Supervisor

15 15 15 20 15


12.4.2 If a candidate fails to submit the project report on or before the specified

deadline, he/she isdeemed to have failed in the Project Work and shall re-

register for the same in a subsequent semester.

12.5 OTHER EMPLOYABILITY ENHANCEMENT COURSES

(a) The seminar / Case study is to be considered as purely INTERNAL (with

100% internal marks only). Every student is expected to present a minimum of 2

seminars per semester before the evaluation committee and for each seminar,

marks can be equally apportioned. The three member committee appointed by

Head of the Institution will evaluate the seminar and at the end of the semester the

marks can be consolidated and taken as the final mark. The evaluation shall be

based on the seminar paper (40%), presentation (40%) and response to the

questions asked during presentation (20%).

(b) The Industrial / Practical Training, Summer Project, Internship, shall carry

100 marks and shall be evaluated through internal assessment only. At the end of

Industrial / Practical training / internship / Summer Project, the candidate shall

submit a certificate from the organization where he / she has undergone training

and a brief report. The evaluation will be made based on this report and a Viva-

Voce Examination, conducted internally by a three member Departmental

Committee constituted by the Head of the Institution. The certificates (issued by

the organization) submitted by the students shall be attached to the mark list sent

by the Head of the Institution to the Controller of Examinations.

12.6 ASSESSMENT FOR VALUE ADDED COURSE

The one / two credit course shall carry 100 marks and shall be evaluated through

continuous assessments only. Two Assessments shall be conducted during the

semester by the Department concerned. The total marks obtained in the tests shall

be reduced to 100 marks and rounded to the nearest integer. A committee

consisting of the Head of the Department, staff handling the course and a senior

Faculty member nominated by the Head of the Institution shall monitor the

evaluation process. The list of students along with the marks and the grades earned

may be forwarded to the Controller of Examinations for appropriate action at least

one month before the commencement of End Semester Examinations.


12.7 ASSESSMENT FOR ONLINE COURSES

Students may be permitted to credit one online course (which are provided with

certificate) subject to a maximum of three credits. The approved list of online

courses will be provided by the Centre for Academic courses from time to time.

This online course of 3 credits can be considered instead of one elective course.

The student needs to obtain certification or credit to become eligible for writing

the End Semester Examination to be conducted by Anna University. The course

shall be evaluated through the End Semester Examination only conducted by

Controller of Examinations, Anna University.

12.8. Internal marks approved by the Head of the Institution shall be displayed by the


12.9 Attendance Record

Every teacher is required to maintain an 'ATTENDANCE AND ASSESSMENT

RECORD' which consists of attendance marked in each lecture or practical or

project work class, the test marks and the record of class work (topic covered),

separately for each course. This should be submitted to the Head of the

department periodically (at least three times in a semester) for checking the

syllabus coverage and the records of test marks and attendance. The Head of the

department will put his signature and date after due verification. At the end of the

semester, the record should be verified by the Head of the Institution who will

keep this document in safe custody (for five years). The University or any

inspection team appointed by the University may verify the records of attendance

and assessment of both current and previous semesters.

13. REQUIREMENTS FOR APPEARING FOR UNIVERSITY EXAMINATIONS

A candidate shall normally be permitted to appear for the University Examinations

for all the courses registered in the current semester (vide clause 6) if he/she has

satisfied the semester completion requirements (subject to Clause 7).

A candidate who has already appeared for any subject in a semester and passed the


grades.




course [Internal Assessment + End semester University Examinations] with a

minimum of 45% of the marks prescribed for the end-semester University

Examination, shall be declared to have passed the course and acquired the relevant

number of credits. This is applicable for both theory and practical courses

(including project work).

14.2 If a student fails to secure a pass in a theory course (except electives), the student

shall doreappearance registration for that course in the subsequent semester, when

offered next,earn continuous assessment marks and attend the end semester

examination.

14.3 If the course, in which the student has failed, is a professional elective or an open

elective, the student may be permitted to register for the same or any other

professional elective or open elective course in the subsequent semesters, attend

the classes and fulfill the attendance requirements as per Clause 7.

14.4 If a student fails to secure a pass in a laboratory course, the student shall register

for the course again, when offered next.

14.5 If a student fails to secure a pass in project work, the student shall register for the

course again, when offered next.

14.6 The passing requirement for the courses which are assessed only through purely

internal assessments (EEC courses except project work), is 50% of the internal

assessment (continuous assessment) marks only.

14.7 If a student has failed in the final semester examination he/she may be allowed to

register for the course in the next semester itself.

14.8 A student can apply for revaluation of the student’s semester examination answer

paper in a theory course, within 2 weeks from the declaration of results, on

payment of a prescribed fee along with prescribed application to the COE through

the Head of the Institution. The COE will arrange for the revaluation and the

results will be intimated to the student concerned through the Head of the

Institution. Revaluation is not permitted for laboratory course and project work.



15.1 All assessments of a course will be evaluated on absolute marks basis. However,

for the purpose of reporting the performance of a candidate, letter grades, each




O (Outstanding) 10 91 – 100

A+ (Excellent) 9 81 – 90

A (Very Good) 8 71 – 80

B+ (Good) 7 61 – 70

B (Average) 6 50 – 60

RA 0 < 50

SA (Shortage of

Attendance)

0

W 0


particular course if he/she obtains any one of the following grades: “O”, “A+”,

“A”, “B+”,“B”.

‘SA’ denotes shortage of attendance (as per clause 7.3) and hence prevention from

writing the end semester examinations. ‘SA’ will appear only in the result sheet.

“RA” denotes that the student has failed to pass in that course. “W” denotes

withdrawal fromthe exam for the particular course. The grades RA and W will

figure both in Marks Sheet as well as in Result Sheet). In both cases the student

has to earn Continuous Assessment marks and appear for the End Semester

Examinations.

If the grade W is given to course, the attendance requirement need not be

satisfied.

Common to all B.E. / B.Tech. Full-Time Programmes (For the students admitted

to B.E. / B.Tech. Programme at various Affiliated Institutions)

If the grade RA is given to a core theory course, the attendance requirement need

not be satisfied, but if the grade RA is given to a Laboratory Course/ Project work

/ Seminar andany other EEC course, the attendance requirements (vide clause 7)

should be satisfied.

15.2 For the Co-curricular activities such as National Cadet Corps (NCC)/ National

Service Scheme (NSS) / NSO / YRC, a satisfactory / not satisfactory grading will


appear in the mark sheet. Every student shall put in a minimum of 75% attendance

in the training and attend the camp compulsorily. The training and camp shall be

completed during the first year of the programme. However, for valid reasons, the

Head of the Institution may permit a student to complete this requirement in the

second year. A satisfactory grade in the above co-curricular activitiesis compulsory

for the award of degree.

15.3 The grades O, A+, A, B+, B obtained for the one credit course shall figure in the

Mark sheet under the title ‘Value Added Courses’. The Courses for which the

grades are RA, SA will notfigure in the mark sheet.

GRADE SHEET

After results are declared, Grade Sheets will be issued to each student which will

contain the following details:

The college in which the candidate has studied

The list of courses enrolled during the semester and the grade scored.

The Grade Point Average (GPA) for the semester and


semester onwards.

GPA for a semester is the ratio of the sum of the products of the number of credits for

courses acquired and the corresponding points to the sum of the number of credits for the

courses acquired in the semester.

CGPA will be calculated in a similar manner, considering all the courses registered from first

semester. RA grades will be excluded for calculating GPA and CGPA.

GPA/CGPA = ∑

∑

Where Ci is the number of Credits assigned to the course, GPi is the point corresponding to

the grade obtained for each course and n is number of all courses successfully cleared during

the particular semester in the case of GPA and during all the semesters in the case of CGPA


16.1 A student shall be declared to be eligible for the award of the B.E. / B.Tech.

Degree provided the student has


Successfully gained the required number of total credits as specified in the

curriculum corresponding to the student’s programme within the stipulated time.

Successfully completed the course requirements, appeared for the End-Semester

examinations and passed all the subjects prescribed in all the 8 semesters / (10

Semesters for B.E. Mechanical Engineering (Sandwich)) within a maximum period

of 7 years (9 years in case of B.E. Mechanical Engineering (Sandwich) and 6 years

in the case of Lateral Entry) reckoned from the commencement of the first (third

in the case of Lateral Entry) semester to which the candidate was admitted.

Successfully passed any additional courses prescribed by the Director, Academic

Courses whenever readmitted under regulations R-2017 (vide clause 18.3)

Successfully completed the NCC / NSS / NSO / YRC requirements.

No disciplinary action pending against the student.

The award of Degree must have been approved by the Syndicate of the University.

16.2 CLASSIFICATION OF THE DEGREE AWARDED

16.2.1 FIRST CLASS WITH DISTINCTION

A student who satisfies the following conditions shall be declared to have passed

the examination in First class with Distinction:

Should have passed the examination in all the courses of all the eight semesters (10

Semesters in case of Mechanical (Sandwich) and 6 semesters in the case of Lateral

Entry) in the student’s First Appearance within five years (Six years in the case of

Mechanical (Sandwich) and Four years in the case of Lateral Entry). Withdrawal

from examination (vide Clause 17) will not be considered as an appearance.

Should have secured a CGPA of not less than 8.50

One year authorized break of study (if availed of) is included in the five years (Six

years in the case of Mechanical (Sandwich) and four years in the case of lateral

entry) for award of First class with Distinction.

Should NOT have been prevented from writing end semester examination due to

lack of attendance in any semester.

16.2.2 FIRST CLASS


the examination in First class:

Should have passed the examination in all the courses of all eight semesters (10

Semesters in case of Mechanical (Sandwich) and 6 semesters in the case of Lateral

Entry) within Six years. (Seven years in case of Mechanical (Sandwich) and Five

years in the case of Lateral Entry)

One year authorized break of study (if availed of) or prevention from writing the

End Semester examination due to lack of attendance (if applicable) is included in


the duration of six years (Seven years in case of Mechanical (Sandwich) and five

years in the case of lateral entry) for award of First class


16.2.3 SECOND CLASS:

All other students (not covered in clauses 16.2.1 and 16.2.2) who qualify for the

award of the degree (vide Clause 16.1) shall be declared to have passed the

examination in

Second Class.

16.3 A candidate who is absent in end semester examination in a course / project work


examination for the purpose of classification. (subject to clause 17 and 18)

16.4 Photocopy / Revaluation

A candidate can apply for photocopy of his/her semester examination answer


payment of a prescribed fee through proper application to the Controller of

Examinations through the Head of Institutions. The answer script is to be valued

and justified by a faculty member, who handled the subject and recommend for

revaluation with breakup of marks for each question. Based on the

recommendation, the candidate can register for the revaluation through proper

application to the Controller of Examinations. The Controller of Examinations

will arrange for the revaluation and the results will be intimated to the candidate

concerned through the Head of the Institutions. Revaluation is not permitted for

practical courses and for project work.


subjects at a time.

16.5 Review




Examination through the Head of the Institution.

Candidates applying for Revaluation only are eligible to apply for Review.


17. PROVISION FOR WITHDRAWAL FROM END-SEMESTER

EXAMINATION

17.1 A student may, for valid reasons, (medically unfit / unexpected family situations /

sports approved by Chairman, sports board and HOD) be granted permission to

withdraw from appearing for the end semester examination in any course or

courses in ANY ONE of the semester examinations during the entire duration of

the degree programme. The application shall be sent to Director, Student Affairs

through the Head of the Institutions with required documents.

17.2 Withdrawal application is valid if the student is otherwise eligible to write the

examination (Clause 7) and if it is made within TEN days prior to the

commencement of the examination in that course or courses and recommended by

the Head of the Institution and approved by the Controller of Examinations.

17.2.1 Notwithstanding the requirement of mandatory 10 days’ notice,

applications for withdrawal for special cases under extraordinary conditions

will be considered on the merit of the case.

17.3 In case of withdrawal from a course / courses (Clause 13) the course will figure

both in Marks Sheet as well as in Result Sheet. Withdrawal essentially requires the

student to register for the course/courses The student has to register for the

course, fulfil the attendance requirements (vide clause 7), earn continuous

assessment marks and attend the end semester examination. However, withdrawal

shall not be construed as an appearance for the eligibility of a candidate for First

Class with Distinction.

17.4 Withdrawal is permitted for the end semester examinations in the final semester

only if the period of study the student concerned does not exceed 5 years as per

clause 16.2.1.


18.1 A student is permitted to go on break of study for a maximum period of one year

as a single spell.







semester for valid reasons, and to re-join the programme in a subsequent year,




through the Head of the Institution stating the reasons therefore and the probable

date of re-joining the programme.

18.3 The candidates permitted to re-join the programme after break of study /


Regulations in force at the time of re-joining. The students re-joining in new

Regulations shall apply to the Director, Academic Courses in the prescribed format

through Head of the Institution at the beginning of the readmitted semester itself

for prescribing additional courses, if any, from any semester of the regulations in-

force, so as to bridge the curriculum in-force and the old curriculum.

18.4 The authorized break of study would not be counted towards the duration

specified for passing all the courses for the purpose of classification (vide Clause

16.1).

18.5 The total period for completion of the Programme reckoned from, the



break of study in order that he/she may be eligible for the award of the degree.

18.6 If any student is prevented for want of required attendance, the period of

prevention shall not be considered as authorized ‘Break of Study’ (Clause 18.1)

19. DISCIPLINE

19.1 Every student is required to observe disciplined and decorous behaviour both

inside and outside the college and not to indulge in any activity which will tend to

bring down the prestige of the University / College. The Head of Institution shall

constitute a disciplinary committee consisting of Head of Institution, Two Heads

of Department of which one should be from the faculty of the student, to enquire

into acts of indiscipline and notify the University about the disciplinary action


recommended for approval. In case of any serious disciplinary action which leads

to suspension or dismissal, then a committee shall be constituted including one

representative from Anna University, Chennai. In this regard, the member will be

nominated by the University on getting information from the Head of the

Institution.

19.2 If a student indulges in malpractice in any of the University / internal examination

he / she shall be liable for punitive action as prescribed by the University from

time to time.

20. REVISION OF REGULATIONS, CURRICULUM AND SYLLABI

The University may from time to time revise, amend or change the Regulations,

Curriculum, Syllabus and scheme of examinations through the Academic Council

with the approval of Syndicate.



REGULATIONS 2017

COMMON TO ALL POST GRADUATE PROGRAMMES


The following Regulations is applicable to the students admitted to M.E / M.Tech.,

M.C.A and M.B.A. Programmes at all Engineering Colleges affiliated to Anna

University, Chennai (other than Autonomous Colleges) and to all the University

Colleges of Engineering of Anna University, Chennai from the academic year 2017-

2018.



I. “Programme” means Post graduate Degree Programme e.g. M.E., M.Tech. Degree

Programme.

II. “Branch” means specialization or discipline of M.E. / M.Tech. Degree Programme

like “Structural Engineering”, “Engineering Design”, etc.

III. “Course” means Theory or Practical subject that is normally studied in a semester,

like Applied Mathematics, Advanced Thermodynamics, etc.


responsible for all academic activities of the University for implementation of

relevant Rules and Regulations.

V. “Chairman” means the Head of the Faculty.

VI. “Head of the Department” means Head of the Department concerned.

VII. “Head of the Institution” means the Principal of a College / Institution who is

responsible for all academic activities of that College / Institution and for

implementation of relevant Rules and Regulations.

VIII. “Controller of Examinations” means the Authority of the University who is




2. PROGRAMMES OFFERED, MODES OF STUDY AND ADMISSION

REQUIREMENTS

2.1 P.G. PROGRAMMES OFFERED:

1) M.E

2) M.Tech.

3) M.B.A.

4) M.C.A.

2.2 MODES OF STUDY:

2.2.1 Full-Time:

Candidates admitted under ‘Full-Time’ should be available in the College /

Institution during the entire duration of working hours (From Morning to Evening

on Full-Time basis) for the curricular, co-curricular and extra-curricular activities

assigned to them.

The Full-Time candidates should not attend any other Full-Time programme(s) /

course(s) or take up any Full-Time job / Part-Time job in any Institution or

Company during the period of the Full-Time programme. Violation of the above

rules will result in cancellation of admission to the PG programme.

2.2.2 Part-Time Mode:

In this mode of study, the students are required to attend classes conducted in the

evenings and complete the course in three years.

2.2.3 Conversion from one mode of study to the other is not permitted.

2.3 ADMISSION REQUIREMENTS:

2.3.1 Candidates for admission to the first semester of the Post-Graduate Degree

Programme shall be required to have passed an appropriate Under-

Graduate Degree Examination of Anna University or equivalent as

specified under qualification for admission as per the Tamil Nadu Common

Admission (TANCA) criteria.

Note: TANCA releases the updated criteria during the admissions every academic

year.

Admission shall be offered only to the candidates who possess the qualification

prescribed against each programme.


Any other relevant qualification which is not prescribed against each programme

shall be considered for equivalence by the committee constituted for the purpose.

Admission to such degrees shall be offered only after obtaining equivalence to

such degrees.

2.3.2 However, the Syndicate of the University may decide to restrict admission

in any particular year to candidates having a subset of qualifications

prescribed at the time of admission.

2.3.3 Notwithstanding the qualifying examination the candidate might have

passed, he/she shall have a minimum level of proficiency in the appropriate

programme / courses as prescribed by the Syndicate of the University from

time to time.

2.3.4 Eligibility conditions for admission such as the class obtained, the number

of attempts in qualifying examination and physical fitness will be as

prescribed by the Syndicate of the University from time to time.

2.3.5 All Part-Time candidates should satisfy other conditions regarding

Experience, Sponsorship etc. that may be prescribed by the Syndicate from

time to time.

3. STRUCTURE OF THE PROGRAMMES

3.1 Categorization of Courses

Every Post Graduate Degree Programme will have a curriculum with syllabi

consisting of theory and practical courses that shall be categorized as follows:

Foundation Courses (FC) may include Mathematics or other basic

courses

Professional Core (PC) courses include the core courses relevant to the

chosen specialization/branch.

Professional Elective (PE) courses include the elective courses relevant

to the chosen specialization/ branch.

Employability Enhancement Courses (EEC) include Project Work

and/or Internship, Seminar, Professional Practices, Summer Project, Case

Study and Industrial / Practical Training.


Instead of two electives in the curriculum, the student may be permitted to

choose a maximum of 2 courses from other PG programmes with the

approval of the Head of the Department offering such courses.

3.2 Courses per Semester

Curriculum of a semester shall normally have a blend of lecture courses and

practical courses including Employability Enhancement Courses. Each course may

have credits assigned as per clause 3.3.



Contact period per week CREDITS 1 Lecture Period

1

2 Tutorial Periods

1

2 Practical Periods

1

(Laboratory / Seminar /

Project Work etc.)

The Contact Periods per week for Tutorials and Practical can only be in multiples

of 2.

3.4 Project Work

3.4.1 The project work for M.E. / M.Tech. Programmes consist of Phase–I and

Phase–II. The Phase–I is to be undertaken during III semester and Phase–

II, which is a continuation of Phase–I is to be undertaken during IV

semester.

3.4.2 In case of candidates of M.E. / M.Tech. Programmes not completing

Phase-I of project work successfully, the candidates can undertake Phase-I

again in the subsequent semester. In such cases the candidates can enrol for

Phase-II, only after successful completion of Phase-I.

3.4.3 Project work shall be carried out under the supervision of a “qualified

teacher” in the Department concerned. In this context “qualified teacher”

means the faculty member possessing (i) PG degree with a minimum of 3

years’ experience in teaching or (ii) Ph.D. degree.

3.4.4 A candidate may, however, in certain cases, be permitted to work on

projects in an Industrial/Research Organization, on the recommendations


of the Head of the Department Concerned. In such cases, the Project work

shall be jointly supervised by a supervisor of the department and an expert,

as a joint supervisor from the organization and the student shall be

instructed to meet the supervisor periodically and to attend the review

committee meetings for evaluating the progress.

3.4.5 The Project work (Phase II in the case of M.E/M.Tech.) shall be pursued

for a minimum of 16 weeks during the final semester.

3.5 The deadline for submission of final Project Report is 60 calendar days from the

last working day of the semester in which project / thesis / dissertation is done.

However, the Phase-I of the Project work in the case M.E. / M.Tech.

Programmes shall be submitted within a maximum period of 30 calendar days

from the last working day of the semester as per the academic calendar published

by the University.

3.6 Industrial Training / Internship


curriculum during summer / winter vacation. In this case the training has to be





training.






approval from the Head of the Institution. The details of the syllabus, time table

and faculty may be sent to the Centre for Academic Courses and the Controller of

Examinations after approval from the Head of the Institution concerned atleast

one month before the course is offered. Students can take a maximum of two one

credit courses / one two credit course during the entire duration of the

Programme.


3.8 Online Courses

3.8.1 Students may be permitted to credit only one online course of 3 credits with

the approval of Head of the Institution and Centre for Academic Courses.


with certificate) subject to maximum of 3 credits. The approved list of

online courses will be provided by the Centre for Academic Courses from

time to time. The student needs to obtain certification or credit to become

eligible for writing the End Semester Examination to be conducted by the

Controller of Examination, Anna University. The details regarding online

courses taken up by students should be sent to the controller of

Examinations, Anna University and Centre for Academic Courses one

month before the commencement of end Semester Examination.

3.9 Medium of Instruction

The medium of instruction is English for all courses, examinations, seminar

presentations and project / thesis / dissertation reports.

4. DURATION AND STRUCTURE OF THE PROGRAMMES:

4.1 The minimum and maximum period for completion of the PG programmes are

given below

Programme Min. No. of Semesters

Max. No. of Semesters

M.E. / M.Tech. (Full-Time) 4 8

M.E. / M.Tech. (Part Time) 6 12

M.C.A. (Full Time) 6 12

M.B.A. (Full Time) 4 8

M.B.A. (Part Time) 6 12

4.2 The Curriculum and Syllabi of all the P.G. Programmes shall be approved by

the Academic Council of Anna University. The number of Credits to be earned

for the successful completion of the programme shall be as specified in the

Curriculum of the respective specialization of the P.G. Programme


4.3 Each semester shall normally consist of 75 working days or 540 periods of each

50 minutes duration, for full-time mode of study or 250 periods for part-time

mode of study. The Head of the Institution shall ensure that every teacher

imparts instruction as per the number of periods specified in the syllabus and

that the teacher teaches the full content of the specified syllabus for the course

being taught. For the purpose of calculation of attendance requirement for

writing the end semester examinations (as per clause 9) by students, following

method shall be used.

(

)

End Semester Examinations conducted by the University will be scheduled after

the last working day of the semester.

4.4 The minimum prescribed credits required for the award of the degree shall be

within the limits specified below:

PROGRAMME PRESCRIBED CREDIT RANGE M.E. / M.Tech. 70 to 75

Programme Prescribed Credits M.C.A. 120-125 M.B.A. 95-100


5.1 The Institution is responsible for registering the courses that each student is

proposing to undergo in the ensuing semester. Each student has to register for

all courses to be undergone in the curriculum of a particular semester (with the

facility to drop courses to a maximum of 6 credits (vide clause 6.5). The student

can also register for courses for which the student has failed in the earlier

semesters. In such cases the student shall do reappearance registration for those

courses for which the attendance requirement is not compulsory. However, the

student have the option to take up some other professional elective or open

elective that he hasfailed to pass. But, the total number of credits that a student

is allowed to register persemester cannot exceed 36. The registration details of

the candidates may be approved bythe Head of the Institution and forwarded to

the Controller of Examinations. This registration is for undergoing the course


as well as for writing the End Semester Examinations. No course shall be

offered by any department of any institution unless a minimum 5 students

register for the course.




previous semesters.


elective instead)


5.2.1 A student has to earn the total number of credits specified in the

curriculum of the respective Programme of study in order to be eligible to

obtain the degree.

5.2.2 From the II to Final semesters, the student has the option of dropping

existing courses in a semester during registration. Total number of credits

of such courses cannot exceed 6 for PG (Full Time) programmes and

cannot exceed 3 for PG (Part Time) programmes.

6. EVALUATION OF PROJECT WORK

The evaluation of Project Work for Phase-I & Phase-II in the case of M.E. /

M.Tech. and project work of M.B.A and M.C.A shall be done independently in the

respective semesters and marks shall be allotted as per the weightages given in

Clause 6.1.

6.1 There shall be three assessments (each 100 marks) during the Semester by a

review committee. The Student shall make presentation on the progress made

before the Committee. The Head of the Institution shall constitute the review

committee for each branch of study. The total marks obtained in the three

assessments shall be reduced to 20 marks and rounded to the nearest integer (as

per the Table given below). There will be a vice-voce Examination during End

Semester Examinations conducted by a Committee consisting of the supervisor,

one internal examiner and one external examiner. The internal examiner and the

external examiner shall be appointed by the Controller of Examination. The


distribution of marks for the internal assessment and End semester examination

is given below:

Review Review Review End Semester Examinations (80 Marks)

I II III Thesis

Submission (30)

Viva-Voce (50)

5 7.5 7.5 External Internal External Supervisor

30 15 20 15

6.2 The Project Report prepared according to approved guidelines as given by

Director, Academic Courses and duly signed by the supervisor(s) and the Head of

the Department concerned shall be submitted to the Head of the Institution.

6.3 If the candidate fails to obtain 50% of the internal assessment marks in the Phase–

I and Phase–II / final project, he/she will not be permitted to submit the report

for that particular semester and has to re-enroll for the same in the subsequent

semester.

If a candidate fails to submit the project report on or before the specified deadline,

he/she is deemed to have failed in the Project Work and shall re-enroll for the

same in a subsequent semester. This applies to both Phase–I and Phase–II in the

case of M.E. / M.Tech. Project Work and the Final Project work of M.B.A. /

M.C.A.

If a candidate fails in the end semester examinations of Phase–I, he/she has to

resubmit the Project Report within 30 days from the date of declaration of the

results. If he / she fail in the End semester examination of Phase–II of Project

work of M.E. / M.Tech.or the Final Project work of M.B.A. / M.C.A, he/she shall

resubmit the Project Report within 60 days from the date of declaration of the

results. The resubmission of a project report and subsequent viva-voce

examination will be considered as reappearance with payment of exam fee. For this

purpose the same Internal and External examiners shall evaluate the resubmitted

report.

6.3.1 A copy of the approved Project Report after the successful completion of viva-

voce examinations shall be kept in the library of the college / institution.


6.3.2 Practical / Industrial Training, Summer Project if specified in the Curriculum shall

not exceed the maximum duration of 4 weeks and should be organized by the

Head of the Department for every student.

6.3.3 At the end of Practical / Industrial Training, Summer Project the candidate shall

submit a certificate from the organization where he/she has undergone training

and also a brief report. The evaluation for 100 marks will be carried out internally

based on this report and a Viva-Voce Examination will be conducted by a

Departmental Committee constituted by the Head of the Institution. Certificates

submitted by the students shall be attached to the mark list sent by the Head of

the Institution to the Controller of Examination.

7. CLASS ADVISER

There shall be a class advisor for each class. The class advisor will be one among

the (course-instructors) of the class. He / She will be appointed by the Head of the

department concerned. The class advisor is the ex-officio member and the

Convener of the class committee. The responsibilities for the class advisor shall be:

To act as the channel of communication between the HOD and the students of

the respective class.




To monitor the academic performance of the students including attendance and

to inform the class committee.


industrial visits.

8. CLASS COMMITTEE

8.1 A Class Committee consists of teachers of the concerned class, student

representatives and a chairperson who is not teaching the class. It is like the

‘Quality Circle’ (more commonly used in industries) with the overall goal of

improving the teaching-learning process. The functions of the class committee

include:

Solving problems experienced by students in the class room and in the

laboratories.

Clarifying the regulations of the programme and the details of rules therein.


Informing the student representatives, the “academic schedule” including the

dates of assessments and the syllabus coverage for each assessment period.

Informing the student representatives, the details of regulations regarding the


project work / seminar etc.) the breakup of marks for each experiment/ exercise/

module of work, should be clearly discussed in the class committee meeting and

informed to the students.


the ways and means of improving the Students Performance

Identifying the weak students, if any, in any specific subject and requesting the

teachers concerned to provide some additional help or guidance or coaching to

such weak students as frequently as possible.

8.2 The class committee for a class under a particular programme is normally

constituted by the Head of the Department. However, if the students of different

programmes are mixed in a class, the class committee is to be constituted by the

Head of the Institution.

8.3 The class committee shall be constituted on the first working day of any semester

or earlier.

8.4 At least 2 student representatives (usually 1 boy and 1 girl) shall be included in the

class committee.

8.5 The chairperson of the class committee shall invite the Class adviser(s) and the

Head of the Department to the meeting of the class committee.

8.6 The Head of the Institution may participate in any class committee of the

institution.

8.7 The Chairperson of be Class Committee is required to prepare the minutes of

every meeting, submit the same to the Head of the Institution within two days of

the meeting and arrange to circulate among the concerned students and teachers.

If there are some points in the minutes requiring action by the management, the

same shall be brought to the notice of the management by the Head of the

Institution.

8.8 The first meeting of the class committee shall be held within one week from the

date of commencement of the semester in order to inform the students about the


nature and weightage of assessments within the framework of the Regulations.

Two or three subsequent meetings may be held at suitable intervals. During these

meetings the student members, representing the entire class, shall meaningfully

interact and express the opinions and suggestions of the class students to improve

the effectiveness of the teaching-learning process.


Each common course offered to more than one group of students shall have a

“Course Committee” comprising all the teachers teaching the common course

with one of them nominated as Course Coordinator. The nomination of the

course Coordinator shall be made by the Head of the Department / Head of the

Institution depending upon whether all the teachers teaching the common course

belong to a single department or to several departments. The ‘Course committee’

shall meet as often as possible and ensure uniform evaluation of the tests and

arrive at a common scheme of evaluation for the tests. Wherever it is feasible, the

course committee may also prepare a common question paper for the Assessment

Test(s).

10. ATTENDANCE REQUIREMENTS FOR COMPLETION OF A SEMESTER

10.1 A candidate who has fulfilled the following conditions shall be deemed to have

satisfied the attendance requirements for completion of a semester. Ideally every

student is expected to attend all classes and earn 100% attendance. However in

order to allow provision for certain unavoidable reasons such as prolonged

hospitalization / accident / specific illness the student is expected to earn a

minimum of 75% attendance to become eligible to write the End-Semester

Examinations.

Therefore, every student shall secure not less than 75% of overall attendance in

that semester as per clause 4.4.

10.2 However, a candidate who secures overall attendance between 65% and 74% in

that current semester due to medical reasons (prolonged hospitalization / accident

/ specific illness / participation in sports events) may be permitted to appear for

the current semester examinations subject to the condition that the candidate shall


submit the medical certificate / sports participation certificate to the Head of the

Institution. The same shall be forwarded to the Controller of Examinations for

record purposes.

10.3 Candidates who could secure less than 65% overall attendance and Candidates

who do notsatisfy the clauses 10.1 & 10.2 will not be permitted to write the end-

semester examination ofthat current semester and are not permitted to go to next

semester. They are required to repeat the incomplete semester in the next

academic year.

11. PROCEDURES FOR AWARDING MARKS FOR INTERNAL

ASSESSMENT(IA)

The maximum marks assigned to different courses shall be as given below:

Each of the theory and practical courses (including project work) shall carry a

maximum of 100 marks of which 20 marks will be through internal assessment

and the End Semester Examination (ESE) will carry 80 marks.

11.1 The marks for the continuous assessment shall be awarded as per the procedure

given below:

(i) Theory Courses: Three tests each carrying 100 marks shall be conducted during

the semester by the Department / College concerned. The total marks obtained in

all tests put together out of 300, shall be proportionately reduced for 20 marks

and rounded to the nearest integer (This also implies equal weightage to all the

three tests).

(ii) Practical Courses: The maximum marks for Internal Assessment shall be 20 in

case of practical courses. Every practical exercise / experiment shall be evaluated

based on conduct of experiment / exercise and records maintained. There shall be

at least one test. The criteria for arriving at the Internal Assessment marks of 20 is

as follows: 75 marks shall be awarded for successful completion of all the

prescribed experiments done in the Laboratory and 25 marks for the test. The

total mark shall be reduced to 20 and rounded to the nearest integer.

(iii) Theory Courses with Laboratory component: The maximum marks for Internal

Assessment shall be 20 in case of theory courses with Laboratory component. For

a theory course with Laboratory component, there shall be three assessments: the


first two assessments (each with a maximum of 100 marks) will be from theory

portions and the third assessment (maximum marks 100) will be for laboratory

component. The sum of marks of all three assessments shall be reduced to 20

marks and rounded to the nearest integer.

(iv) Other Employability Enhancement Courses

(a) The Seminar / Case study is to be considered as purely INTERNAL (with

100% internal marks only). Every student is expected to present a minimum of 2

seminars per semester before the evaluation committee and for each seminar

marks can be equally apportioned. The three member committee appointed by

Head of the Institution will evaluate the seminar and at the end of the semester the

marks can be consolidated and taken as the final mark. The evaluation shall be

based on the seminar paper (40%), presentation (40%) and response to the

questions asked during presentation (20%).

(b) The Industrial / Practical Training shall carry 100 marks and shall be

evaluated through internal assessment only. At the end of Industrial / Practical

training / internship / Summer Project, the candidate shall submit a certificate

from the organization where he / she has undergone training and a brief report.

The evaluation will be made based on this report and a Viva-Voce Examination,

conducted internally by a three member Departmental Committee constituted by

the Head of the Institution. Certificates submitted by the candidate shall be

attached to the mark list sent by the Head of the Department.

11.2 Assessment for Value Added Course



semester by the Department concerned. The total marks obtained in the tests shall

be reduced to 100 marks and rounded to the nearest integer. A committee

consisting of the Head of the Department, staff handling the course and a senior

Faculty member nominated by the Head of the Institution shall monitor the

evaluation process. The list of students along with the marks and the grades

earned may be forwarded to the Controller of Examinations for appropriate action

at least one month before the commencement of End Semester Examinations


11.3 Assessment for Online Courses

Students may be permitted to credit one online course (which are provided with

certificate) subject to a maximum of three credits. The approved list of online

courses will be provided by the Centre for Academic courses from time to time.

This online course of 3 credits can be considered instead of one elective course.

The student needs to obtain certification or credit to become eligible for writing

the End Semester Examination to be conducted by Anna University. The course

shall be evaluated through the End Semester Examination only conducted by

Controller of Examinations, Anna University.



11.5 Every teacher is required to maintain an 'ATTENDANCE AND ASSESSMENT

RECORD' which consists of attendance marked in each lecture or practical or

project work class, the test marks and the record of class work (topics covered),

separately for each course. This should be submitted to the Head of the

Department periodically (at least three times in a semester) for checking the

syllabus coverage and the records of test marks and attendance. The Head of the

department will put his signature and date after due verification. At the end the

semester, the record should be verified by the Head of the institution who will

keep this document in safe custody (for five years). The university or any

inspection team appointed by the University may inspect the records of

attendance and assessments of both current and previous semesters.

12. REQUIREMENTS FOR APPEARING FOR SEMESTER EXAMINATION

12.1 A candidate shall normally be permitted to appear for the University examinations

of the current semester if he/she has satisfied the semester completion

requirements as per clause 10.1 & 10.2 and has registered for examination in all

courses of the current semester.

12.2 Further, registration is mandatory for all the courses in the current semester as

well as for arrear(s) course(s) for the university examinations failing which, the

candidate will not be permitted to move to the higher semester.


12.3 A student who has passed all the courses prescribed in the curriculum for the

award of the degree shall not be permitted to re-enroll to improve his/her marks

in a course or the aggregate marks / CGPA.

13. UNIVERSITY EXAMINATIONS

13.1 There shall be an End- Semester Examination of 3 hours duration in each lecture

based course. The examinations shall ordinarily be conducted between October

and December during the odd semesters and between April and June in the even

semesters. For the practical examinations (including project work), both internal

and external examiners shall be appointed by the University.

13.2 WEIGHTAGE

The following will be the weightage for different courses.

i) Lecture or Lecture cum Tutorial based course Internal Assessment - 20%

End Semester Examination - 80%

ii) Laboratory based courses

Internal Assessment - 20%

End Semester Examination - 80%

iii) Project work

Internal Assessment - 20%

Evaluation of Project Report by external examiner - 30%

Viva-Voce Examination - 50% iv) Practical training / summer project / seminar Internal Assessment

- 100%



course with a minimum of 50% of the marks prescribed for each of the course

of the End-Semester University Examination in both theory and practical


courses shall be declared to have passed in the course and acquired the relevant

number of credits.

14.2 If a student fails to secure a pass in a theory course (except electives), the

student shall do reappearance registration for that course in the subsequent

semester, when offered next, earn continuous assessment marks and attend the

end semester examination.

14.3 If the course, in which the student has failed, is a professional elective or an

open elective, the student may be permitted to register for the same or any

other professional elective or open elective course in the subsequent semesters,

attend the classes and fulfill the attendance requirements as per Clause 10.

14.4 If a student fails to secure a pass in a laboratory course, the student shall register

for the course again, when offered next.

14.5 If a student fails to secure a pass in project work, the student shall register for

the course again, when offered next.


internal assessment (EEC courses except project work), is 50% of the internal

assessment marks only.

14.7 If a student has failed in the final semester examination he/ she may be allowed

to register for the course in the next semester itself.

14.8 A student can apply for revaluation of the student’s semester examination

answer paper in a theory course, within 2 weeks from the declaration of results,

on payment of a prescribed fee along with prescribed application to the COE

through the Head of the Institution. The COE will arrange for the revaluation

and the results will be intimated to the student concerned through the Head of

the Institution. Revaluation is not permitted for laboratory course and project

work.




carrying certain number of points, will be awarded as per the range of total

marks (out of 100) obtained by the candidate in each subject as detailed below:



O (Outstanding) 10 91 - 100

A+ (Excellent) 9 81 - 90

A (Very Good) 8 71 – 80

B + (Good) 7 61 – 70

B (Average) 6 50 - 60

RA (ReAppear) 0 <50

SA (Shortage of Attendance) 0

W (Withheld) 0


particular course if he/she obtains any one of the following grades: “O”, “A+”,

“A”, “B+”,“B”.

‘SA’ denotes shortage of attendance (as per clause 10.3) and hence

prevention from writing the end semester examinations. ‘SA’ will appear only

in the result sheet.


withdrawal from the exam for the particular course. The grades RA and W will

figure both in Marks Sheet as well as in Result Sheet). In both cases the student

has to earn Continuous Assessment marks and appear for the End Semester

Examinations. If the grade W is given to course, the attendance requirement need

not be satisfied. If the grade RA is given to a core theory course, the attendance

requirement need not be satisfied, but if the grade RA is given to a Laboratory

Course/ Project work / Seminar and any other EEC course, the attendance

requirements (vide clause 10) should be satisfied.

15.2 The grades O, A+, A, B+, B obtained for the one credit course shall figure in the

Mark sheet under the title ‘Value Added Courses’. The Courses for which the

grades are RA, SA will not figure in the mark sheet.

15.3 GRADE SHEET

After results are declared, Grade Sheets will be issued to each student which will

contain the following details:

The college in which the candidate has studied.

The list of courses enrolled during the semester and the grades scored.

The Grade Point Average (GPA) for the semester and



semester onwards.

GPA for a semester is the ratio of the sum of the products of the number of

credits for courses acquired and the corresponding points to the sum of the

number of credits for the courses acquired in the semester. CGPA will be

calculated in a similar manner, considering all the courses registered from first


GPA/CGPA = ∑

∑

Where Ci is the number of Credits assigned to the course, GPi is the point

corresponding to the grade obtained for each course and n is number of all courses

successfully cleared during the particular semester in the case of GPA and during

all the semesters in the case of CGPA


16.1 A student shall be declared to be eligible for the award of the PG Degree

(M.E./M.Tech., M.C.A., M.B.A.) provided the student has

i. Successfully gained the required number of total credits as specified in the

curriculum corresponding to the student’s programme within the stipulated time.

ii. a. M.E./ M.Tech., M.B.A.(Full Time)


examinations and passed all the subjects prescribed in all the 4 semesters within a

maximum period of 4 years reckoned from the commencement of the first

semester to which the candidate was admitted.

b. M.E./ M.Tech., M.B.A.(Part Time) and M.C.A.(Full Time)


examinations and passed all the subjects prescribed in all the 6 semesters within a

maximum period of 6 years reckoned from the commencement of the first


iii. Successfully passed any additional courses prescribed by the Director,

Academic Courses whenever readmitted under regulations other

than R-2017 (vide clause 19.3)

iv. No disciplinary action pending against the student.


v. The award of Degree must have been approved by the Syndicate of the

University.


17.1 FIRST CLASS WITH DISTINCTION:

A Student who satisfies the following conditions shall be declared to have passed


M.E. / M.Tech. M.B.A.(Full Time)

Should have passed the examination in all the courses of all the four semesters in

the student’s First Appearance within three years, which includes authorised break

of study of one year (if availed). Withdrawal from examination (vide Clause 18)

will not be considered as an appearance.


Should NOT have been prevented from writing end Semester examination due to

lack of attendance in any of the courses.

M.E. / M.Tech. M.B.A.(Part Time) and M.C.A (Full Time)

Should have passed the examination in all the courses of all the six semesters in

the student’s First Appearance within four years, which includes authorised break

of study of one year (if availed). Withdrawal from examination (vide Clause 18)

will not be considered as an appearance.




17.2 FIRST CLASS:



M.E. / M.Tech. M.B.A.(Full Time)

Should have passed the examination in all the courses of all four semesters within

three years, which includes one year of authorized break of study (if availed) or

prevention from writing the End Semester Examination due to lack of attendance

(if applicable).


M.E. / M.Tech. M.B.A. (Part Time) and M.C.A (Full Time)

Should have passed the examination in all the courses of all six semesters within

four years, which includes one year of authorized break of study (if availed) or



(if applicable).


17.3 SECOND CLASS:

All other students (not covered in clauses 17.1 and 17.2) who qualify for the award

of the degree (vide Clause 16.1) shall be declared to have passed the examination

in Second Class.

17.4 A student who is absent in End Semester Examination in a course / project work


examination (except approved withdrawal from end semester examinations as per

clause 18) for the purpose of classification.





Examinations through the Head of Institutions. The answer script is to be valued




application to the Controller of Examinations. The Controller of Examinations

will arrange for the revaluation and the results will be intimated to the candidate

concerned through the Head of the Institutions. Revaluation is not permitted for

practical courses and for project work.

17.6 Review


examination


answer paper in a theory course, within the prescribed date on payment of a

prescribed fee

through proper application to Controller of Examination through the Head of the

Institution. Candidates applying for Revaluation only are eligible to apply for

Review.

18. PROVISION FOR WITHDRAWAL FROM EXAMINATION:

18.1 A student may, for valid reasons, (medically unfit / unexpected family

situations / sports approved by Chairman, sports board and HOD) be granted

permission to withdraw from appearing for the end semester examination in any

course or courses in ANY ONE of the semester examinations during the entire

duration of the degree programme. The application shall be sent to Director,

Student Affairs through the Head of the Institutions with required documents.



commencement of the examination in that course or courses and recommended


18.2.1 Notwithstanding the requirement of mandatory 10 days notice,

applications for withdrawal for special cases under extraordinary

conditions will be considered on the merit of the case.



student to register for the course/courses The student has to register for the

course, fulfill the attendance requirements (vide clause 10), earn continuous

assessment marks and attend the end semester examination. However, withdrawal

shall not be construed as an appearance for the eligibility of a candidate for First

Class with Distinction.



clause 17.1.

19. AUTHORIZED BREAK OF STUDY FROM A PROGRAMME


19.1 A student is permitted to go on break of study for a maximum period of one year

as a single spell.

19.2 Break of Study shall be granted only once for valid reasons for a maximum of

one year during the entire period of study of the degree programme. However, in








through the Head of the Institution stating the reasons therefore and the

probable date of rejoining the programme.




Regulations shall apply to the Director, Academic Courses in the prescribed

format through Head of the Institution at the beginning of the readmitted

semester itself for prescribing additional courses, if any, from any semester of the

regulations in-force, so as to bridge the curriculum in-force and the old

curriculum.



17.1).




of break of study in order that he/she may be eligible for the award of the

degree.



20. DISCIPLINE


20.1 Every student is required to observe disciplined and decorous behavior both


bring down the prestige of the University / College. The Head of Institution

shall constitute a disciplinary committee consisting of Head of Institution, Two

Heads of Department of which one should be from the faculty of the student, to

enquire into acts of indiscipline and notify the University about the disciplinary

action recommended for approval. In case of any serious disciplinary action

which leads to suspension or dismissal, then a committee shall be constituted

including one representative from Anna University, Chennai. In this regard, the

member will be nominated by the University on getting information from the


20.2 If a student indulges in malpractice in any of the University / internal

examination he / she shall be liable for punitive action as prescribed by the

University from time to time.


The University may from time to time revise, amend or change the Regulations,




REGULATIONS 2019

FLEXIBLE CHOICE BASED CREDIT SYSTEM

Common to all B.E./B.Tech. Full-Time Programme

(For admitted the learners to B.E. / B.Tech. Programme at Saveetha Engineering College)

DEGREE OF BACHELOR OF ENGINEERING/BACHELOR OF

TECHNOLOGY

This Regulation is applicable to the learners admitted to B.E/B.Tech. Programme in

Saveetha Engineering College, an autonomous Institution from the academic year 2019-2020

onwards.



a. “Programme” means Degree Programme that is B.E./B.Tech. Degree

Programme.

b. “Discipline” means specialization or branch of B.E./B.Tech. Degree

Programme, like Agriculture Engineering, Information Technology, etc.

c. “Course” means a theory and / or practical subjects that are normally

studied in a semester, like Mathematics, Physics, etc.

d. “College” means Saveetha Engineering College, Chennai.

e. “Head of the Department” means concerned Department Head.

f. “Dean, Centre for Academics” means the authority of the College who is

responsible for all Academic activities of the Academic Programme, for

implementation of relevant rules of this regulations pertaining to the

Academic Programme.

g. “Controller of Examinations” means the authority of the Saveetha

Engineering College who is responsible for all activities of the Internal and

End Semester Examinations.

h. “Head of the Institution” means the Principal of the College.

i. “University” means the Anna University, Chennai.


2. ADMISSION

2.1. Regular

Candidates seeking admission to the first semester of the eight semesters B.E. /

B.Tech

Degree Programme:

Should have passed the Higher Secondary Examination (10+2) Curriculum

(Academic Stream) prescribed by the Government of Tamil Nadu with

Mathematics, Physics and Chemistry as three of the four subjects of study under

Part-III or any examination of any other University or authority accepted by the

Syndicate of Anna University as equivalent thereto.

(OR)


(Vocational groups in Engineering / Technology) as prescribed by the

Government of Tamil Nadu.

2.2 Lateral Entry

The candidates who possess a Diploma in Engineering / Technology awarded by

the State Board of Technical Education, Tamil Nadu or its equivalent are eligible

to apply for Lateral entry admission to the third semester of B.E. / B.Tech. in

the branch corresponding to the branch of study.

(OR)

The candidates who possess the Degree in Science (B.Sc.,) (10+2+3 stream) with

Mathematics as a subject at the B.Sc. level are eligible to apply for Lateral entry

admission to the third semester of B.E. / B.Tech.

The candidates admitted under lateral entry category, will abide by the

regulations of the respective batch he/she belongs.

2.3 Transferred

Learners, who are transferred from other institution, are eligible to be admitted,

either in III semester or V semester or VII semester, as per the eligibility norms.


However, the learner may have to undergo additional courses, if specified by the

Centre for Academics.


Four year B.E. / B.Tech. Programme offered, are listed in ANNEXURE-I.



Every B.E. / B. Tech. Programme will have a curriculum with syllabi consisting of

theory and/or practical courses that shall be categorized as follows:

S. No.

Category

Credits Range

Regular Lateral Entry

1

Humanities and Social Sciences (HS) courses

include Technical English and Communication

skills, and Management Studies

8 - 16

4

(Communicativ

e English)

2 Basic Sciences (BS) courses include

Mathematics and Physical Sciences 25 – 33

4 – 8

(Mathematics)

3

Engineering Sciences (ES) courses include

Engineering Graphics, Basics of Engineering

practices (Electrical / Electronics / Mechanical /

Instrumentation), and Programming.

25 – 33

10

(Relevant and

Required Basic

Core course)

4

Professional Core (PC) courses includes the

core courses relevant to the chosen


50 – 66 50 – 66


5

Professional Elective (PE) courses include the

elective courses relevant to the chosen

specialization / branch.

17 – 25 17 – 25

6

Open Elective (OE) courses includes the

courses from other branches for beyond the

Curriculum Learning, Online Courses, Foreign

Language/BEC/TOEFL/IELTS and any other

co-curricular activities with prior approval of the

Dean, Centre for Academics, for interdisciplinary

knowledge, Personality and Character

Development.

8 – 16 8 – 16

7

Employability Enhancement Courses (EEC)

includes Mini Project, Project Work, Internship,

Industrial/Practical Training, Entrepreneurship,

Consultancy, Publication, Aptitude Training,

Competitions and any other co-curricular

activities with prior approval from Dean, Centre

for Academics.

17 – 25 17 – 25

8

Mandatory Courses(MC) include Professional

Ethics, Constitution of India and Environmental

Science

0 0

Total Credits 160-165 120-125

4.2 Personality and Character Development

The learners are encouraged to enroll in any one of the personality and character

development programme (like NSS/YRC/Swatch Bharath) and undergo training

for about 80 hours, within the first two years and attend a camp of about seven days.


The training shall include classes on hygiene and health awareness and also training

in first-aid.


the College. Youth Red Cross (YRC) will have activities related to social services in

and around College. While the training activities will normally be during weekends,

the camp will normally be during vacation period.


Each course is assigned certain number of credits based on the number of periods

the learner has to spend to learn the course.

Contact period per week Credits

One Period of Learning Theory 1

One Period of Learning in Small Group 1

Two Periods of Learning through Practice (Laboratory/ Project Work)

1

4.4 Short term Industrial / Practical Training and Internship

4.4.1 Industrial Visit

Every learner is required to go for at least one Industrial Visit every year starting

from the second year of the Programme. The Heads of Departments shall ensure

that necessary arrangements are made in this regard.

The learner should undergo, short term Industrial / Practical Training and

Internship in a company/research organization, during summer/winter vacation,

approved by Dean, Centre for Academics and the Head of the Institution.

Industrial / Practical Training and Internship shall carry 100 marks and shall be

evaluated through internal assessment only. At the end of internship, the candidate

shall submit a certificate from the organization where he / she have undergone

training and a brief report. The evaluation will be made based on the report and a


Viva-Voce Examination, conducted internally by a three member of Departmental

Committee, constituted by the Head of the Department. The grade will be awarded,

based on the recommendation of the Industry partners (50% weightage), evaluation

of the report (25% weightage) and viva-voce (25% weightage).

The learner can earn 1 credit, on completion of continuous 2 weeks, Industrial /

In-plant Training, in Employment Enhancement category. The learner can earn 2

credits, on completion of continuous 4 weeks Internship, in Employment

Enhancement category. Only 1 credit will be awarded, if the internship period is 2

weeks, (continuously).

Learners should earn a maximum of 2 credits for Internship and a maximum of 1

credit for industrial/practical training, during the entire duration of the Programme.

The credits earned will be indicated in the Mark Sheet but not included in the

CGPA for the award of degree.

4.4.2 Aptitude and Placement training

A course on Aptitude and Placement training will be offered under the

Employment Enhancement category, for 2 credits. Learner has to undergo, Aptitude

and Placement training course and complete all the 6 modules by the end of sixth

semester. The assessment marks of all the six modules will be consolidated as

internal marks. During sixth semester, end semester examination will be conducted.

The learner should have completed the course and should have earned the credits.

The credits earned will be indicated in the Mark Sheet and is also included in the

CGPA for the award of degree.

4.2.1 Evaluation of Aptitude and Placement Exams

For each semester, from semester 1 to 6 internal assessment will be conducted for

100 marks. The total 600 marks will be converted into 50 marks (Internal Marks).

Semester Content No. of hours

1 & 2 Soft Skills 30

3 & 4 Soft Skills + Aptitude + Verbal 60

5 & 6 Soft Skills + Aptitude + Verbal 60

Total 150


During 6th semester, a final end semester exam for 100 marks will be conducted,

which will be converted to 50 marks (External Marks).

4.4.3 Mini Project

Learners as a team comprising a maximum of 3 members, should complete Mini

Project, relevant to their branch of study and earn 2 credits, under the Employment

Enhancement category. The Head of the Department shall constitute a review

committee, comprising of 3 members, for Mini Project. The review committee shall

assess the same based on the criteria, approved by Dean, Centre for Academics and

award marks for 100. The credits earned will be indicated in the Mark Sheet and is

also included in the CGPA for the award of degree.

4.5 Publication in Journal:

Credits will be awarded for publishing paper in Scopus Indexed journal at the rate of

1 credit for Source Normalized Impact Points (SNIP) of 0.01 to 0.5, 2 Credits for

0.51 to 1.00 and 3 Credits for SNIP greater than 1.01 under EEC. The learner can

earn 1 credit, if his/her paper is published in IEEE Digital Explore, under EEC

category, but not included in the CGPA for the award of degree.

4.6 Online Courses / Professional Certifications / Courses underwent in Other

Institutions (India and Abroad)

4.6.1 Learners can earn credits by undergoing; Professional Certifications / Courses

underwent in Other Institutions (India and Abroad) in any category, with the

prior approval of the Dean, Centre for Academics and the Head of the

Institution. Grades will be awarded based on grades awarded by the organization

conducting the course and it will be finalized by the Dean, Centre for Academics

and the Head of the Institution.

4.6.2 Learners may be permitted to register for two Online courses, subjected to a

maximum of four credits, under the Open Elective Category. The approved list

of online courses will be provided by the Centre for Academics, from time to

time. The learner needs to obtain certification to earn his/her credit.

In addition to the certification obtained online, students shall be subjected to in-

house assessment of the courses concerned by a faculty nominated by Head of


the Department and Approved by Dean, Centre for Academics. The credits

earned will be indicated in the Mark Sheet, and will also be included in the

CGPA for the award of degree. The details regarding, online courses or courses

underwent in other institutions or professional certifications, taken up by

learners, should be sent to the Controller of Examinations

4.6.3 The learner can earn 2 credits, on completion of BEC / IELTS / TOEFL /

Foreign Language / Arts / Value Added Courses, which are listed by Centre

for Academics, under the Open Electives Category. The credits earned will be

included for CGPA.

4.7 Project Work

Project work may be allotted to a single learner or to a group of learners not

exceeding 3 per group preferably learners from different departments. The Head

of the Department shall constitute a review committee, comprising of 5 members,

for project work for each branch of study. There shall be three reviews during the

semester by the review committee. The learner shall make a presentation on the

progress made by him / her before the committee. The total marks obtained in the

three reviews will be for 30 marks and rounded to the nearest integer as per the

scheme given in 4.7.1.

4.7.1 The project report shall carry a maximum of 20 marks. The project report shall be

submitted as per the approved guidelines given by Dean, Centre for Academics.

Same marks shall be awarded to every learner within the project group for the

project report. The viva-voce examination shall carry 50 marks. Marks are awarded

TOFL IELTS BEC Vantage Grade Assigned

35–45 5 80 – 100 B

46–59 5.5 101 – 120 B+

60–78 6

79–93 6.5 121 – 140 A

94–101 7

102–109 7.5 141 – 180 A+

110–114 8

115–117 8.5 181 – 230 O

118-120 9


to each learner of the project group based on the individual performance in the

viva-voce examination.

Revie

w 1

Revie

w 2

Revie

w 3

End Semester Examination

Total Project Report (20) Viva Voce (50)

Supervisor Internal Internal External

10 10 10 10 10 25 25 100

4.7.2 If a learner fails to submit the project report on or before the specified deadline,

he/she is deemed to have failed in the Project Work and shall re-register for the

same in a subsequent semester.

4.7.3 The learners shall be permitted to carry out their final semester Project work for six

months in industry/research organizations through the Head of Department, who

shall recommend and forward the proposal to the Centre for Academics for

approval and the approval communicated to the Controller of Examinations, prior

to the commencement of project work.

4.8. Mandatory Courses

The courses such as Professional Ethics, Environmental Science and Constitution

of India are mandatory. The minimum attendance percentage is 75% for each of

these courses. Every learner should have undergone these courses, and should have

passed the examinations. However, no credits are assigned for the courses.

4.9. Medium of Instruction


presentations and Project / Thesis.



5.1 A learner is ordinarily expected to complete the B.E. / B.Tech. programme in 8

semesters (four academic years) but in any case, not more than 14 semesters for

HSC (or equivalent) learners and not more than 12 semesters for Lateral Entry

learners. The learner has to pay the tuition fee for every semester, until he/she

completes the course.


minutes each.

5.3 The Head of the Institution shall ensure that every facilitator imparts instruction as

per the number of periods specified in the syllabus and that the facilitator imparts

the content of the specified syllabus for the course offered.

The Head of the Department may conduct additional classes for improvement,

special coaching, conduct Formative assessment etc., over and above the specified

periods. But for the purpose of calculation of attendance requirement for writing

the end semester examinations (as per clause 6) by the learners, following method

shall be used, for each course.

5.4 The End Semester Examination will ordinarily follow immediately after the last

working day of the semester commencing from I semester as per the academic

schedule prescribed from time to time.


commencement of the first semester to which the learner was admitted shall not


break of study (vide clause 18) in order that he/she may be eligible for the award of

the degree (vide clause 16).


6.1 In each semester, the learner can register for a minimum of 18 credits and a

maximum of 36 credits, (up to 6th semester). However, a learner can register less


than the prescribed minimum credits, under specific conditions, with the

approval of Dean, Centre for Academics.

6.2 The learner should register for the course within three days, when the course is

open for registration.

6.3 The prerequisite as defined in the Syllabus, has to be satisfied, (the learner should

have registered for the prerequisite course, obtained 75% of attendance and a

minimum of 50% in the internal marks), before registering for a particular course.

6.4 The learner is permitted to withdraw i.e., drop from the course, within 5 working

days of registration.

6.5 The registration details of the learners should be approved by the Head of the

Department and forwarded to the Controller of Examinations, through Centre for

Academics. This registration is for undergoing the course as well as for writing the

End Semester Examinations (vide clause 7).

6.6 Courses shall be offered by any department, if a minimum of 30 learners register

for the course. Any changes in this regard, is at the sole discretion of Dean, Centre

for Academics.

7. ATTENDANCE REQUIREMENTS FOR COMPLETION OF THE COURSE

AND TO BE ELIGIBLE TO ATTEND THE END OF SEMESTER EXAM

7.1 A learner who has fulfilled the following conditions shall be deemed to have

satisfied the requirements for completion of a course. Ideally every learner is

expected to attend all classes of all the courses and secure 100% attendance.

However, in order to give provision for certain unavoidable reason such as health

conditions, the learner is expected to attend at least 75% of the classes. Therefore,

he/she shall secure not less than 75% (after rounding off to the nearest integer) of

attendance.

However, a candidate who secures attendance between 70% and 74% (after

rounding off to the nearest integer) in a particular course due to medical reasons

(prolonged hospitalization / accident / specific illness) / participation in sports

events may be permitted to appear for the current semester examination subject to


the condition that the candidate shall submit the medical certificate /sports

participation certificate attested by the Head of the Institution. The same shall be

forwarded to the Controller of Examinations for record purposes.

7.2 Candidates who secure less than 70% attendance for a particular course and

candidates who do not satisfy the clause 7.1 shall not be permitted to write the

end semester examination, of that particular course(s) in that semester.

They are required to re-register for the course.

7.3 Every facilitator is required to maintain an Attendance and Assessment Record

which consists of attendance marked in each lecture or practical or project work,

the test marks and the record of class work (topic covered), separately for each

course. This should be submitted to the Head of the Department periodically (at

least three times in a semester) for checking the syllabus coverage and the records

of test marks and attendance. The Head of the Department will put his/her

signature and date after due verification. At the end of the semester, the record

should be verified by the Head of the Institution who will keep this document in

safe custody (for five years).

8. MENTOR

To help the learners in planning their courses of study and for general advice on the

academic programme. The Head of the Department of the learners will assign 30

learners to a faculty of the Department who shall function as Mentor, for those

learners throughout their period of study. The Mentor shall advise the learners in

registering and reappearance for courses, authorize the process, monitor their

attendance and progress and counsel them periodically. If necessary, the Mentor

may also discuss with or inform the parents about the progress / performance of

the learners concerned.

The responsibilities for the Mentor shall be:

To guide the learners’ enrollment and registration of the courses.

To authorize the final registration of the courses at the beginning of each

semester


To inform the learners about the various facilities and activities available to

enhance the learner’s curricular and co-curricular activities.

To monitor the academic and general performance of the learners including

attendance and to counsel them accordingly.

Analyzing the performance of the learners after each test and finding ways and

means of solving problems, if any. Identifying the different learners, if any, and

requesting the faculty concerned to provide some additional help or guidance.

9. CLASS COMMITTEE

Every course shall have a Class Committee for learners, consisting of teachers of

the course concerned, learner representatives and a chairperson who is not teaching

the course, probably a faculty of other department.

The functions of the Class Committee include,

a. Solving problems experienced by learners in the classroom and in the laboratories.

Clarifying the regulations of the Degree Programme. Informing the learner

representatives, the details of Regulations regarding weightage used for each

assessment. In the case of practical courses (laboratory / drawing / project work

etc.) the breakup of marks for each experiment / exercise / module of work, should

be clearly discussed in the course committee for students meeting.

b. Informing the learner representatives, the academic schedule including the dates of

assessments and the syllabus coverage for each assessment.

9.1 The Class committee for learners for a course under a particular branch is normally

constituted by the Head of the Department. However, if the learners of different

branches are mixed in a class, the Class Committee for students is to be constituted

by the Head of the Institution.

9.2 The Class Committee for learners shall be constituted within the first week of each

semester.

9.3 At least 4 learner representatives (boys and girls) shall be included in the Class

Committee for the learners.

9.4 The Chairperson of the Class Committee for learners may invite the Head of the

Department to the course for the Class Committee meeting.


9.5 The Head of the Institution may participate in any of the Class Committee meeting

for learners.


same to the Dean, Centre for Academics and Head of the Institution, within two

days of the meeting and arrange to circulate it among the learners and teachers

concerned. If there are some points in the minutes requiring action by the

management, the same shall be brought to the notice of the Management by the


9.7 The first meeting of the Class Committee for learners shall be held within one week

from the date of commencement of the semester, in order to inform the learners

about the nature and weightage of assessments within the framework of the

Regulations. Two or three subsequent meetings may be held in a semester at suitable

intervals. The Class Committee for learners’ Chairman shall put on the Notice

Board the cumulative attendance particulars of each learner at the end of every such

meeting to enable the learners to know their attendance details to satisfy the clause 7

of this Regulation. During these meetings the learner members representing the

entire course, shall meaningfully interact and express the opinions and suggestions

of the other learners of the class in order to improve the effectiveness of the

teaching-learning process.


Each common theory course offered to more than one discipline or branch shall

have a “Course Committee” comprising all the facilitators imparting the common

course with one of them nominated as Course Coordinator. The nomination of the

Course Coordinator shall be made by the Head of the Department / Head of the

Institution depending upon whether all the facilitators imparting the common

course belong to a single department or to several departments. The ‘Course

committee’ shall meet in order to arrive at a common scheme of evaluation for the

test and shall ensure a uniform evaluation of the tests. Wherever feasible, the course

committee may also prepare a common question paper for the internal

assessment(s).



11.1 Performance in each course of study shall be evaluated based on

(i) Continuous Internal Assessment throughout the semester (Formative Assessment)

and

(ii) End Semester examination at the end of the semester (Summative Assessment).

11.2 Each course, both theory and/or practical (including project work & viva voce

Examinations) shall be evaluated for a maximum of 100 marks. For all theory

and/or practical courses including project work, the Continuous Internal

Assessment will carry a weightage of 50 marks while the End - Semester

examination will carry a weightage of 50 marks.

Weightage of Assessment Marks

Description L T P Credits Theory Practical Total

Theory 3 0 0 3 100% - 100%

Theory 3 1 0 4 100% - 100%

Theory Integrated with Lab 1 0 4 3 33% 67% 100%





Practical 0 0 4 2 - 100% 100%

Practical 0 0 2 1 - 100% 100%

11.3 Industrial training and Internship shall carry 100 marks and shall be evaluated


11.4 The End Semester examination (theory and/or practical) of 3 hours duration shall



11.5 The End Semester examination for project work shall consist of evaluation of the

final report submitted by the learner or learners of the project group (of not

exceeding 3 learners) by an external examiner and an internal examiner, followed by

a viva-voce examination conducted separately for each learner by a committee


consisting of the external examiner, the supervisor of the project group and an

internal examiner.

11.6 For the End Semester examination in both theory and practical courses including



11.7 Theory Courses Integrated with Lab

The learner has to register for the theory course integrated with lab, for the total

credit assigned. If the learner has failed in the theory or practical component,

he/she has to re-register for the course along with practical or theory component

respectively.


For all theory and/or practical courses (including project work) the continuous

assessment shall be for a maximum of 50 marks. The above continuous assessment shall

be awarded as per the procedure given below:

12.1 Theory Courses

Three tests shall be conducted during the semester by the department concerned.

Theory - Internal Assessment Pattern

Mode of Assessment Maximum Marks Weightage

Continuous Internal Assessment 1 50 10



Quiz/Assignment/Seminar/Mini Project in the course/Simulation work relevant to the course*

50 20

Total 100 50

*Necessary proof to be submitted

12.2 Laboratory Courses

The maximum marks for Internal Assessment shall be 75 in case of practical courses.

Every practical shall be evaluated based on conduct of Exercise / Experiment,


Records maintained and Viva voce. Double the weightage will be given to the Model

Practical Examination.

Practical - Internal Assessment Pattern

[

]%

A = S (Max. marks 100 for each

experiment)

B =

13. REQUIREMENTS FOR APPEARING FOR END SEMESTER

EXAMINATIONS

i) A candidate shall normally be permitted to appear for the End Semester

Examinations for all the courses registered in the current semester (vide clause 6 and

7).

ii) A candidate who has already appeared for any subject in a semester and passed the


grades.


14.1 Learner should have an aggregate of not less than 50% marks putting together

Internal and End semester Examination. Also they must meet 45% minimum marks

in End Semester Examination as well to be declared as passed in that particular

course.

14.2 If a learner fails to secure a pass in a Theory course/ Practical / Project Work, the

learner shall Re-register for that course in the subsequent semester, when offered

next, earn internal assessment marks and attend the end semester examination.

However, if the learner has attendance percentage of 75% or more, and also has

internal marks of 50%, then he/she can register only for the end semester

examination, and write the end semester examination alone. The previous internal

assessment marks will be considered, but for only ONE subsequent appearance. For

further appearances, he/she has to Re-register for the course, whenever it is

offered next.



15.1 All assessments of a course will be evaluated on absolute marks basis. However, for

the purpose of reporting the performance of a candidate, letter grades, each carrying

certain number of points, will be awarded as per the range of total marks (out of

100) obtained by the candidate in each subject as detailed below:



A+ (Excellent) 9 81 - 90

A (Very Good) 8 71 - 80

B+ (Good) 7 61 - 70

B ( Average) 6 50 - 60

P (Pass) Not Applicable ≥50

RR / RA (Re-Register / Re-Appear) 0 < 50


WD (Withdrawal) 0

WH (Withheld) 0

A learner is deemed to have passed and acquired the corresponding credits in a particular

course if he/she obtains any one of the following grades: “O”, “A+”, “A”, “B+”, “B”.

“SA” denotes shortage of attendance (as per clause 7) and hence prevention

from writing the end semester examinations.

“RR” denotes that the learner has failed to pass in that course and he/she has

to Re-Register.

“W” denotes withdrawal from the exam for the particular course.

The grades “RA” and “WD” will figure both in Mark Sheet as well as in Result

Sheet.

In case of “RR”, the learner has to earn Internal Assessment marks and appear

for the End Semester Examinations.


If the grade “W” is given to course, the attendance requirement need not be

satisfied.

If the grade “RR” is given to a Theory course/Laboratory Course/Project

work / Seminar and any other EEC course, the attendance requirements (vide

clause 7) should be satisfied.

Grade sheet:

After results are declared, Grade Sheets will be issued to each learner which

will contain Name of the College, list of courses enrolled during the semester

and the grade secured by the learner.

The Grade Point Average (GPA) for the semester and the Cumulative Grade

Point Average (CGPA) of all courses enrolled from first semester onwards.



number of credits for the courses acquired in the semester.

CGPA will be calculated in a similar manner, considering all the courses

registered from first semester. RR grades will be excluded for calculating GPA

and CGPA.

Where,

Ci is the number of Credits assigned to the course.

GPi is the point corresponding to the grade obtained for each course.

n is the number of all courses successfully cleared during the particular semester in

the case of GPA and during all the semesters in the case of CGPA.

Grades will not be assigned for Mandatory/ Non CGPA courses.



16.1 A learner shall be declared to be eligible for the award of the B.E. / B.Tech.

Degree provided the learner has

a. Successfully gained the required number of total credits as specified in the

curriculum corresponding to the learner’s programme within the stipulated time.

b. Successfully completed the course requirements, appeared for the End-Semester

examinations and passed all the subjects prescribed in all the 8 semesters, within

a maximum period of 7 years (and 6 years in the case of Lateral Entry) reckoned

from the commencement of the first (third in the case of Lateral Entry)


c. Successfully passed any additional courses prescribed by the Dean, Centre for

Academics, whenever readmitted under regulations R-2019 (vide clause 18.3)

d. No disciplinary action pending against the learner.

e. The award of Degree must have been approved by the Syndicate of the

University.

16.2 Classification of the Degree Awarded

16.2.1 First Class with Distinction

A learner who satisfies the following conditions shall be declared to have passed


Should have passed the examination in all the courses of all the 8 semesters / 6

semesters (in the case of Lateral Entry) in the learner’s First Appearance within

4 years / 3 years (in the case of Lateral Entry).

Withdrawal from examination (vide Clause 17) will not be considered as an

appearance. The candidate should have secured a CGPA of greater than or

equal to 8.50.

One year authorized break of study (if availed of) is included in the 5 years (and

4 years in the case of lateral entry) for award of First class with Distinction.

The learner should NOT have been prevented from writing end semester

examination due to lack of attendance in any semester.


16.2.2 First Class

A learner who satisfies the following conditions shall be declared to have passed the

examination in First class:

Should have passed the examination in all the courses of all eight semesters

(and 6 semesters in the case of Lateral Entry) within 6 years (5 years in case of

lateral entry).

One year authorized break of study (if availed of) or prevention from writing

the End Semester examination due to lack of attendance (if applicable) is

included in the duration of 6 years (and 5 years in the case of lateral entry) for

award of First class should have secured a CGPA of not less than 7.00.

16.2.3 Second Class

All other learners (not covered in clauses 16.2.1 and 16.2.2) who qualify for the

award of the degree (vide Clause 16.1) shall be declared to have passed the

examination in Second Class.

16.3 A candidate who is absent for end semester examination in a course / project

work after having registered for the same shall be considered to have appeared in

that examination for the purpose of classification. (Subject to clause 17 and 18)





Examinations through the Head of Institution. The answer script is to be valued




application to the Controller of Examinations. The Controller of Examinations will

arrange for the revaluation and the results will be intimated to the candidate

concerned through the Head of the Institution. Revaluation is not permitted for

practical courses and for project work. A candidate can apply for revaluation of

answer scripts for not exceeding 5 subjects at a time.


16.5 Review




Examination through the Head of the Institution. Candidates who have applied for

revaluation only are eligible to apply for Review.

17. PROVISION FOR WITHDRAWAL FROM END SEMESTER

EXAMINATION

17.1 A learner may, for valid reasons, (medically unfit / unexpected family situations /

sports approved by Chairman, sports board and HOD) be granted permission to

withdraw from appearing for the end semester examination in any course or

courses in ANY ONE of the semester examinations during the entire duration of

the degree programme. The application shall be sent to Dean, Centre for

Academics, through the Head of the Department with required documents.

17.2 Withdrawal application is valid if the learner is otherwise eligible to write the




17.2.1 Notwithstanding the requirement of mandatory 10 days’ notice, applications

for withdrawal for special cases under extraordinary conditions will be

considered on the merit of the case.



learner to register for the course/courses. The learner has to register for the course,

fulfill the attendance requirements (vide clause 7), earn continuous assessment

marks and attend the end semester examination. However, withdrawal shall not be

construed as an appearance for the eligibility of a candidate for First Class with

Distinction.



only if the period of study of the learner concerned does not exceed 5 years as per

clause 16.2.1.


18.1 A learner is permitted to go on break of study for a maximum period of six months

as a single spell.








applies to the Dean, Centre for Academics, in advance, through Head of the

Department, stating the reasons and the probable date of rejoining the programme,

but not later than the last date for registering for the end semester examination of

the semester in question, which will be further approved by the Head of the

Institution.



Regulations in force at the time of rejoining. The learners rejoining in new

Regulations shall apply to the Dean, Centre for Academics in the prescribed format

through Head of the Institution at the beginning of the readmitted semester itself

for prescribing additional courses, if any, from any semester of the regulations in-

force, so as to bridge the curriculum in-force and the old curriculum.

18.4 The authorized break of study would not be counted towards the duration specified

for passing all the courses for the purpose of classification (vide Clause 16.1).





break of study in order that he/she may be eligible for the award of the degree.

18.6 If any learner is prevented for want of required attendance, the period of


19. DISCIPLINE

19.1 Every learner is required to observe disciplined and decorous behavior both inside

and outside the college and not to indulge in any activity which will tend to bring

down the prestige of the College. The Head of Institution shall constitute a

disciplinary committee consisting of Discipline in charge, Two Heads of

Department of which one should be from the faculty of the learner, to enquire into

acts of indiscipline and notify the disciplinary action recommended for approval.

19.2 If a learner indulges in malpractice in any of the internal or end semester

examination he / she shall be liable for punitive action as prescribed by the college

from time to time.


The college may from time to time revise, amend or change the Regulations,


with the approval of Governing Council.

21. SPECIAL CASES

In the event of any clarification in the interpretation of the above rules and

regulations, they shall be referred to the Standing Committee. The Standing

Committee will offer suitable interpretations/ clarifications /amendments required

for special case on such references and get them ratified in the next meeting of the

Academic Council. The decision of the Academic Council is final.

--------


ANNEXURE – I

FOUR YEAR B.E. DEGREE COURSES:

1. Agriculture Engineering

2. Biomedical Engineering

3. Civil Engineering

4. Computer Science and Engineering

5. Electrical and Electronics Engineering

6. Electronics and Communication Engineering

7. Electronics and Instrumentation Engineering

8. Mechanical Engineering

9. Medical Electronics

FOUR YEAR B.Tech. COURSES:

1. Chemical Engineering

2. Information Technology


PG REGULATIONS 2019


Common to all M.E./M.Tech./M.B.A Full-Time Programmes

This Regulation is applicable to the learners admitted to M.E/M.Tech./M.B.A. Programme

in Saveetha Engineering College, an autonomous Institution from the Academic Year 2019-

2020 onwards.



i. “Programme” means Post graduate Degree Programme e.g. M.E., M.Tech. Degree

Programme.

ii. “Branch” means specialization or discipline of M.E. / M.Tech. Degree Programme

like “Applied Electronics”, “Embedded Systems Technologies”, etc.

iii. “Course” means Theory or Practical subject that is normally studied in a semester,

like Applied Mathematics, Advanced Digital Image Processing, etc.

iv. “Director, Centre for Academics” means the authority of the College who is

responsible for all academic activities of the College for implementation of relevant

Rules and Regulations.

v. “Head of the Department” means concerned Department Head.

vi. “Controller of Examinations” means the Authority of Saveetha Engineering

College who is responsible for all activities of the Internal and End Semester

Examinations.

vii. “Head of the Institution” means the Principal of the College.

viii. “University” means ANNA UNIVERSITY, CHENNAI.

2. PROGRAMMES OFFERED, MODES OF STUDY AND ADMISSION

REQUIREMENTS

2.1 P.G. PROGRAMMES OFFERED:

1. M.E., - Applied Electronics

2. M.E., - CAD/CAM

3. M.E., - Communication and Networking

4. M.E., - Computer Science Engineering

5. M.E., - Embedded System Technologies

6. M.E., - Software Engineering

7. M.E., - VLSI Design


8. M.B.A

2.2 MODE OF STUDY:

Full-Time:

Candidates admitted under ‘Full-Time’ should be available in the College / Institution

during the entire duration of working hours (From Morning to Evening on Full-Time

basis) for the curricular, co-curricular and extra-curricular activities assigned to them.

The Full-Time candidates should not attend any other Full-Time programme(s) / course(s)

or take up any Full-Time job / Part-Time job in any Institution or Company during the

period of the Full-Time programme. Violation of the above rules will result in cancellation

of admission to the PG programme.

2.3 ADMISSION REQUIREMENTS:

2.3.1 Candidates for admission to the first semester of the Post-Graduate Degree

Programme shall be required to have passed an appropriate Under-Graduate

Degree Examination of Anna University or equivalent as specified under

qualification for admission as per the Tamil Nadu Common Admission (TANCA)

criteria.

Note: TANCA releases the updated criteria during the admissions every academic year.

Admission shall be offered only to the candidates who possess the qualification prescribed

against each programme.

Any other relevant qualification which is not prescribed against each programme shall be

considered for equivalence by the committee constituted for the purpose. Admission to

such degrees shall be offered only after obtaining equivalence to such degrees.

2.3.2 However, the Academic Council may decide to restrict admission in any particular

year to candidates having a subset of qualifications prescribed at the time of

admission.

2.3.3 Notwithstanding the qualifying examination the candidate might have passed,

he/she shall have a minimum level of proficiency in the appropriate programme /

courses as prescribed from time to time.


2.3.4 Eligibility conditions for admission such as the class obtained, the number of

attempts in qualifying examination and physical fitness will be as prescribed by the

Academic Council from time to time.

2.4 STRUCTURE OF THE PROGRAMMES


Every Post Graduate Degree Programme will have a curriculum with syllabi consisting of

theory and practical courses that shall be categorized as follows:

2.5.1 Foundation Courses (FC) may include Mathematics or other basic courses

2.5.2 Professional Core (PC) courses include the core courses relevant to the chosen


2.5.3 Professional Elective (PE) courses include the elective courses relevant to the

chosen specialization/ branch.

2.5.4 Employability Enhancement Courses (EEC) includes Project Work and/or

Internship, Seminar, Professional Practices, Summer Project, Case Study and

Industrial / Practical Training.

Instead of two electives in the curriculum, the student may be permitted to choose a

maximum of 2 courses from other PG programme with the approval of the Dean

Academics and Head of the Institution.

2.6 Courses per Semester

Curriculum of a semester shall normally have a blend of lecture courses and practical

courses including Employability Enhancement Courses. Each course may have credits

assigned as per clause 3.3.



CONTACT PERIOD PER WEEK CREDITS

1 Lecture Period 1

2 Tutorial Periods 1

2 Practical Periods (Laboratory / Seminar / Project Work etc.,) 1

The Contact Periods per week for Tutorials and Practical can only be in multiples of 2.


3.4 Project Work

3.4.1 The project work for M.E. / M.Tech. Programmes consist of Phase–I and Phase–

II. The Phase–I is to be undertaken during III semester and Phase–II, which is a

continuation of Phase–I is to be undertaken during IV semester.

3.4.2 In case of candidates of M.E. / M.Tech. Programmes not completing Phase-I of

project work successfully, the candidates can undertake Phase-I again in the

subsequent semester. In such cases the candidates can enroll for Phase-II, only

after successful completion of Phase-I.

3.4.3 Project work shall be carried out under the supervision of a “qualified teacher” in

the Department concerned. In this context “qualified teacher” means the faculty

member possessing (i) PG degree with a minimum of 3 years of experience in

teaching or (ii) Ph.D. degree.

3.4.4 A candidate may, however, in certain cases, be permitted to work on projects in an

Industrial/Research Organization, on the recommendations of the Head of the

Department Concerned. In such cases, the Project work shall be jointly supervised

by a supervisor of the department and an expert, as a joint supervisor from the

organization and the student shall be instructed to meet the supervisor periodically

and to attend the review committee meetings for evaluating the progress.

3.4.5 The Project work (Phase II in the case of M.E/M.Tech.) shall be pursued for a

minimum of 16 weeks during the final semester.

3.6 The deadline for submission of final Project Report is 60 calendar days from the

last working day of the semester in which project / thesis / dissertation is done.

However, the Phase-I of the Project work in the case M.E. / M.Tech. Programmes

shall be submitted within a maximum period of 30 calendar days from the last

working day of the semester as per the academic calendar published by the

institution.


3.7 Industrial Training / Internship


curriculum during summer / winter vacation. In this case the training has to be





training.






approval from Dean, Centre for Academics and Head of the Institution. The

details of the syllabus, time table and faculty may be sent to the Centre for

Academics, and the Controller of Examinations after approval from the Head of

the Institution concerned at least one month before the course is offered. Students

can take a maximum of two one credit courses / one two credit course during the

entire duration of the Programme.

3.9 Online Courses

3.9.1 Students may be permitted to credit only one online course of 3 credits with the approval of Head of the Institution and Centre for Academics.


with certificate) subject to a maximum of three credits. The approved list of

online courses will be provided by the Centre for Academics from time to

time. The student needs to obtain certification or credit to become eligible

for writing the End Semester Examination to be conducted by Controller of

Examinations, Saveetha Engineering College. The details regarding online

courses taken by students should be sent to the Controller of Examinations,

and Centre for Academics one month before the commencement of end

Semester Examination.


3.10 Medium of Instruction


presentations and project / thesis / dissertation reports.

3. DURATION AND STRUCTURE OF THE PROGRAMMES:

3.1 The minimum and maximum period for completion of the P.G. Programmes are given

below:

Programme Min. No. of

Semesters

Max. No. of

Semesters

M.E. / M.Tech. (Full-Time) 4 8

M.B.A. (Full Time) 4 8

3.2 The Curriculum and Syllabi of all the P.G. Programmes shall be approved by the

Academic Council of Saveetha Engineering College. The number of Credits to be

earned for the successful completion of the programme shall be as specified in the

Curriculum of the respective specialization of the P.G. Programme.

3.3 Each semester shall normally consist of 75 working days or 540 periods of each 50

minutes duration, for full-time mode of study. The Head of the Institution shall ensure

that every teacher imparts instruction as per the number of periods specified in the

syllabus and thatthe teacher teaches the full content of the specified syllabus for the

course being taught. For the purpose of calculation of attendance requirement for

writing the end semester examinations (as per clause 9) by students, following method

shall be used.

End Semester Examinations conducted by the University will be scheduled after the

last working day of the semester.

3.4 The minimum prescribed credits required for the award of the degree shall be within

the limits specified below:


Programme Prescribed Credit Range

M.E. / M.Tech. 70 - 75

M.B.A. 86 - 90


5.1 The Institution is responsible for registering the courses that each student is proposing

to undergo in the ensuing semester. Each student has to register for all courses to be

undergone in the curriculum of a particular semester (with the facility to drop courses

to a maximum of 6 credits (vide clause 5.2)). The student can also register for courses

for which the student has failed in the earlier semesters.

The registration details of the candidates may be approved by the Head of the

Institution and forwarded to the Controller of Examinations. This registration is for

undergoing the course as well as for writing the End Semester Examinations.




previous semesters.


elective instead).


5.2.1 A student has to earn the total number of credits specified in the curriculum of

the respective Programme of study, in order to be eligible to obtain the degree.

5.2.2 From the II to Final semesters, the student has the option of dropping existing

courses in a semester during registration. Total number of credits of such

courses cannot exceed 6 for PG (Full Time) programmes.

6. EVALUATION OF PROJECT WORK

6.1 The evaluation of Project Work for Phase-I and Phase-II in the case of M.E. / M.Tech.

and project work of M.B.A shall be done independently in the respective semesters

and marks shall be allotted as per the weightages given in Clause 6.1.


6.2 There shall be three assessments (each 100 marks) during the Semester by a review

committee. The Student shall make presentation on the progress made before the

Committee. The Head of the Department shall constitute the review committee for

each branch of study. The total marks obtained in the three assessments shall be

reduced to 20 marks and rounded to the nearest integer (as per the Table given below).

There will be a vice-voce Examination during End Semester Examinations conducted

by a Committee consisting of the supervisor, one internal examiner and one external

examiner. The internal examiner and the external examiner shall be appointed by the

Controller of Examination. The distribution of marks for the internal assessment and

End semester examination is given below:

Revi

ew

1

Revi

ew

2

Revi

ew

3

End Semester Examination

Tota

l Project Report (30) Viva Voce (50)

Supervisor Internal External Internal External

5 7.5 7.5 10 10 10 35 15 100

6.3 The Project Report prepared according to approved guidelines as given by Dean,

Centre for Academics. It should be duly signed by the supervisor(s) and the Head of

the Department concerned and shall be submitted to the Head of the Institution.

6.4 If the candidate fails to obtain 50% of the internal assessment marks in the Phase–I

and Phase–II / final project, he/she will not be permitted to submit the report for that

particular semester and has to re-enroll for the same in the subsequent semester.

If a candidate fails to submit the project report on or before the specified deadline,

he/she is deemed to have failed in the Project Work and shall re-enroll for the same in

a subsequent semester. This applies to both Phase–I and Phase–II in the case of M.E.

/ M.Tech. Project Work and the Final Project work of M.B.A.

If a candidate fails in the end semester examinations of Phase–I, he/she has to

resubmit the Project Report within 30 days from the date of declaration of the results.


If he / she fails in the End semester examination of Phase–II Project work of M.E. /

M.Tech. or the Final Project work of M.B.A., he/she shall resubmit the Project Report

within 60 days from the date of declaration of the results. The resubmission of a

project report and subsequent viva-voce examination will be considered as

reappearance with payment of exam fee. For this purpose the same Internal and

External examiners shall evaluate the resubmitted report.

6.4.1 A copy of the approved Project Report after the successful completion of

viva-voce examinations shall be kept in the library of the college.

6.4.2 Practical / Industrial Training, Summer Project if specified in the Curriculum

shall not exceed the maximum duration of 4 weeks and should be organized

by the Head of the Department for every student.

6.4.3 At the end of Practical / Industrial Training, Summer Project the candidate

shall submit a certificate from the organization where he/she has undergone

training and also a brief report. The evaluation for 100 marks will be carried

out internally based on this report and a Viva- Voce Examination will be

conducted by a Departmental Committee constituted by the Head of the

Department. Certificates submitted by the students shall be sent to the

Controller of Examination, with the approval of Dean, Centre for Academics

and Head of the Institution.

7. CLASS ADVISOR

There shall be a class advisor for each class. The class advisor will be one among the

(course-instructors) of the class. He / She will be appointed by the Head of the

department concerned. The class advisor is the ex-officio member and the Convener

of the class committee. The responsibilities for the class advisor shall be:

To act as the channel of communication between the HoD and the students of the

respective class.








industrial visits.

8. CLASS COMMITTEE

8.1 A Class Committee consists of teachers of the concerned class, student

representatives and a chairperson who is not teaching the class. It is like the ‘Quality

Circle’ (more commonly used in industries) with the overall goal of improving the

teaching-learning process. The functions of the class committee include:

Solving problems experienced by students in the class room and in the laboratories.

Clarifying the regulations of the programme and the details of rules therein.

Informing the student representatives, the “academic schedule” including the dates

of assessments and the syllabus coverage for each assessment period.

Informing the student representatives, the details of regulations regarding the


project work / seminar etc.) the breakup of marks for each experiment/ exercise/

module of work, should be clearly discussed in the class committee meeting and

informed to the students.


the ways and means of improving the Students Performance

Identifying the weak students, if any, in any specific subject and requesting the

teachers concerned to provide some additional help or guidance or coaching to

such weak students as frequently as possible.

8.2 The class committee for a class under a particular programme is normally constituted

by the Head of the Department. However, if the students of different programmes are

mixed in a class, the class committee is to be constituted by the Head of the

Institution.

8.3 The class committee shall be constituted on the first working day of any semester or

earlier.

8.4 At least 2 student representatives (usually 1 boy and 1 girl) shall be included in the

class committee.


8.5 The chairperson of the class committee shall invite the Class adviser(s) and the Head

of the Department to the meeting of the class committee.

8.6 The Head of the Institution may participate in any class committee of the institution.

8.7 The Chairperson of be Class Committee is required to prepare the minutes of every

meeting, submit the same to the Head of the Institution within two days of the

meeting and arrange to circulate among the concerned students and teachers. If there

are some points in the minutes requiring action by the management, the same shall be

brought to the notice of the management by the Head of the Institution.

8.8 The first meeting of the class committee shall be held within one week from the date

of commencement of the semester in order to inform the students about the nature

and weightage of assessments within the framework of the Regulations. Two or three

subsequent meetings may be held at suitable intervals. During these meetings the

student members, representing the entire class, shall meaningfully interact and express

the opinions and suggestions of the class students to improve the effectiveness of the

teaching-learning process.


Each common course offered to more than one group of students shall have a “Course

Committee” comprising all the teachers teaching the common course with one of them

nominated as Course Coordinator. The nomination of the course Coordinator shall be

made by the Head of the Department / Head of the Institution depending upon

whether all the teachers teaching the common course belong to a single department or

to several departments. The ‘Course committee’ shall meet as often as possible and

ensure uniform evaluation of the tests and arrive at a common scheme of evaluation for

the tests. Wherever it is feasible, the course committee may also prepare a common

question paper for the assessments.

10. ATTENDANCE REQUIREMENTS FOR COMPLETION OF A SEMESTER

10.1 A candidate who has fulfilled the following conditions shall be deemed to have satisfied

the attendance requirements for completion of a semester.


Ideally every student is expected to attend all classes and earn 100% attendance.

However in order to allow provision for certain unavoidable reasons such as

prolonged hospitalization / accident / specific illness the student is expected to earn a

minimum of 75% attendance to become eligible to write the End-Semester

Examinations. Therefore, every student shall secure not less than 75% of overall

attendance in that semester as per clause 4.3.

10.2 However, a candidate who secures overall attendance between 65% and 74% in that


specific illness / participation in sports events) may be permitted to appear for the

current semester examinations subject to the condition that the candidate shall submit

the medical certificate / sports participation certificate to the Head of the Institution.

The same shall be forwarded to the Controller of Examinations for record purposes.

10.3 Candidates who could secure less than 65% overall attendance and Candidates who

do not satisfy the clauses 10.1 & 10.2 will not be permitted to write the end-semester

examination of that current semester and are not permitted to go to next semester.

They are required to repeat the incomplete semester in the next academic year.

11. PROCEDURES FOR AWARDING MARKS FOR INTERNAL ASSESSMENT

(IA)

The maximum marks assigned to different courses shall be as given below:

Each of the theory and practical courses (including project work) shall carry a

maximum of 100 marks of which 50 marks will be through internal assessment and

the End Semester Examination (ESE) will carry 50 marks.

11.1 The marks for the continuous assessment shall be awarded as per the procedure given

below:

(i) Theory Courses:

Three tests each carrying 100 marks shall be conducted during the semester. The total

marks obtained in all tests put together out of 300, shall be proportionately reduced

for 50 marks and rounded to the nearest integer (This also implies equal weightage to

all the three tests).


(ii) Practical Courses:

The maximum marks for Internal Assessment shall be 50 in case of practical courses.

Every practical exercise / experiment shall be evaluated based on conduct of

experiment / exercise and records maintained. There shall be at least one test. Theory

Courses with Laboratory component:

The maximum marks for Internal Assessment shall be 50 in case of theory courses

with Laboratory component. For a theory course with Laboratory component, there

shall be three assessments: the first two assessments (each with a maximum of 100

marks) will be from theory portions and the third assessment (maximum marks 100)

will be for laboratory component. The sum of marks of all three assessments shall be

reduced to 50 marks and rounded to the nearest integer.

(iii) Other Employability Enhancement Courses

(a) The seminar / Case study is to be considered as purely INTERNAL (with 100%

internal marks only). Every student is expected to present a minimum of 2 seminars

per semester before the evaluation committee and for each seminar marks can be

equally apportioned. The three member committee appointed by Head of the

Institution will evaluate the seminar and at the end of the semester the marks can be

consolidated and taken as the final mark. The evaluation shall be based on the seminar

paper (40%), presentation (40%) and response to the questions asked during

presentation (20%).

(b) The Industrial / Practical Training shall carry 100 marks and shall be evaluated

through internal assessment only. At the end of Industrial / Practical training /

internship / Summer Project, the candidate shall submit a certificate from the

organization where he / she has undergone training and a brief report. The evaluation

will be made based on this report and a Viva-Voce Examination, conducted internally

by a three member Departmental Committee constituted by the Head of the

Institution. Certificates submitted by the candidate shall be attached to the mark list

sent by the Head of the Department.

11.2 Assessment for Value Added Course




semester. The total marks obtained in the tests shall be reduced to 100 marks and

rounded to the nearest integer. A committee consisting of the Head of the Department,

staff handling the course and a senior Faculty member nominated by the Head of the

Institution shall monitor the evaluation process. The list of students along with the marks

and the grades earned may be forwarded to the Controller of Examinations for

appropriate action at least one month before the commencement of End Semester

Examinations.

11.3 Assessment for Online Courses

Students may be permitted to credit one online course (which is provided with certificate)

subject to a maximum of three credits. The approved list of online courses will be

provided by the Centre for Academic courses from time to time. This online course of

3 credits can be considered instead of one elective course. The student needs to

obtain certification or credit to become eligible for writing the End Semester Examination

to be conducted by Anna University. The course shall be evaluated through the End

Semester Examination only conducted by Controller of Examinations, Saveetha

Engineering College.


respective HoDs within 5 days from the last working day.

11.5 Every teacher is required to maintain an 'ATTENDANCE AND ASSESSMENT

RECORD' which consists of attendance marked in each lecture or practical or project

work class, the test marks and the record of class work (topics covered), separately for

each course. This should be submitted to the Head of the Department periodically (at

least three times in a semester) for checking the syllabus coverage and the records of

test marks and attendance. The Head of the department will put his signature and date

after due verification. At the end the semester, the record should be verified by the

Head of the institution who will keep this document in safe custody (for five years).

The university or any inspection team appointed by the University may inspect the

records of attendance and assessments of both current and previous semesters.


12. REQUIREMENTS FOR APPEARING FOR SEMESTER EXAMINATION

12.1 A candidate shall normally be permitted to appear for the University examinations of

the current semester if he/she has satisfied the semester completion requirements as

per clause 10.1 & 10.2 and has registered for examination in all courses of the current

semester.

12.2 Further, registration is mandatory for all the courses in the current semester as well as

for arrear(s) course(s) for the university examinations failing which, the candidate will

not be permitted to move to the higher semester.

12.3 A student who has passed all the courses prescribed in the curriculum for the award

of the degree shall not be permitted to re-enroll to improve his/her marks in a course

or the aggregate marks / CGPA.

13. END SEMESTER EXAMINATIONS

13.1 There shall be an End- Semester Examination of 3 hours duration in each lecture

based course. The examinations shall ordinarily be conducted between October and

December during the odd semesters and between April and June in the even

semesters.

13.2 WEIGHTAGE

The following will be the weightage for different courses.

i) Lecture or Lecture cum Tutorial based course:

Internal Assessment 50%

End Semester Examination 50%

ii) Laboratory based courses


End Semester Examination 50%

iii) Project work


Evaluation of Project Report Viva-Voce Examination 50%

iv) Practical training / summer project / seminar Internal Assessment 100%




course with a minimum of 50% of the marks prescribed for each of the course of

the End-Semester Examination in both theory and practical courses shall be

declared to have passed in the course and acquired the relevant number of credits.

14.2 If a student fails to secure a pass in theory courses in the current semester

examination, he/she is allowed to write arrear examinations for the next three

consecutive semesters and their internal marks shall be carried over for the above

mentioned period of three consecutive semesters.

In case, if he/she has not successfully completed all the courses of semester I at

the end of semester IV, he/she shall redo the semester I courses along with

regular students. For the subsequent semesters of II, III and IV, the same

procedure shall be followed, subject to the maximum permissible period for this

programme.

14.3 If a student fails to secure a pass in a laboratory course, the student shall

register for the course again, when offered next.

14.4 If a student fails to secure a pass in project work even after availing clause (6.3),

the student shall register for the course again, when offered next.


internal assessment (EEC courses except project work), is 50% of the internal

assessment marks only.

14.6 A student can apply for revaluation of the student’s semester examination

answer paper in a theory course, within 2 weeks from the declaration of results,

on payment of a prescribed fee along with prescribed application to the COE

through the Head of the Institution. The COE will arrange for the revaluation

and the results will be intimated to the s t u d e n t concerned through the Head of

the Institution. Revaluation is not permitted for laboratory course and project

work.









A + (Excellent) 9 81 - 90

A (Very Good) 8 71 – 80

B + (Good) 7 61 – 70

B (Average) 6 50 - 60

RA 0 <50


W 0

A student is deemed to have passed and acquired the corresponding credits

in a particular course if he/she obtains any one of the following grades: “O”,

“A+”, “A”, “B+”,“B”.

‘SA’ denotes shortage of attendance (as per clause 10.3) and hence

prevention from writing the end semester examinations. ‘SA’ will

appear only in the result sheet.


withdrawal from the exam for the particular course. The grades RA and W

will figure both in Marks Sheet as well as in Result Sheet). In both cases the

student has to earn Continuous Assessment marks and appear for the End

Semester Examinations.

If the grade W is given to course, the attendance requirement need not be

satisfied.

If the grade RA is given to a core theory course, the attendance requirement

need not be satisfied, but if the grade RA is given to a Laboratory Course/


Project work / Seminar and any other EEC course, the attendance

requirements (vide clause 10) should be satisfied.

15.2 The grades O, A+, A, B+, B obtained for the one credit course shall figure in

the Mark sheet under the title ‘Value Added Courses’. The Courses for which

the grades are RA, SA will not figure in the mark sheet.

16. GRADE SHEET

After results are declared, Grade Sheets will be issued to each learner which will

contain Name of the College, list of courses enrolled during the semester and the

grade secured by the learner.

The Grade Point Average (GPA) for the semester and the Cumulative Grade

Point Average (CGPA) of all courses enrolled from first semester onwards.



number of credits for the courses acquired in the semester. CGPA will be

calculated in a similar manner, considering all the courses registered from first


where

Ci is the number of credits assigned to the course

GPi is the Grade point corresponding to the grade obtained for each Course

n is number of all Courses successfully cleared during the particular semester

in the case of GPA and during all the semesters in the case of CGPA.


17.1 A student shall be declared to be eligible for the award of the PG Degree (M.E./

M.Tech., M.B.A.) provided the student has


i. Successfully gained the required number of total credits as specified in the

curriculum corresponding to the student’s programme within the stipulated

time.

ii. M.E./ M.Tech., M.B.A.

Successfully completed the course requirements, appeared for the End-

Semester examinations and passed all the subjects prescribed in all the 4

semesters within a maximum period of 4 years reckoned from the

commencement of the first semester to which the candidate was admitted.

iii. No disciplinary action pending against the student.

iv. The award of Degree must have been approved by the Anna University.


18.1 FIRST CLASS WITH DISTINCTION:

A Student who satisfies the following conditions shall be declared to have passed


M.E,/ M.Tech. M.B.A.

Should have passed the examination in all the courses of all the four semesters in

the student’s First Appearance within three years, which includes authorised

break of study of one year (if availed). Withdrawal from examination (vide Clause

18) will not be considered as an appearance.




18.2 FIRST CLASS:



M.E. / M.Tech. M.B.A.

Should have passed the examination in all the courses of all four semesters within

three years , which includes one year of authorized break of study (if availed) or



(if applicable).


18.3 SECOND CLASS:

All other students (not covered in clauses 17.1 and 17.2) who qualify

for the award of the degree (vide Clause 16.1) shall be declared to have

passed the examination in Second Class.

18.4 A student who is absent in End Semester Examination in a course / project

work after having registered for the same shall be considered to have appeared

in that examination (except approved withdrawal from end semester

examinations as per clause 18) for the purpose of classification.





Examinations. The answer script is to be valued and justified by a faculty

member, who handled the subject and recommend for revaluation with breakup

of marks for each question. Based on the recommendation, the candidate can

register for the revaluation through proper application to the Controller of

Examinations. The Controller of Examinations will arrange for the revaluation

and the results will be intimated to the candidate concerned through the Head of

the Institution. Revaluation is not permitted for practical courses and for project

work.


subjects at a time.

18.6 Review




Examination through the Head of the Institution. Candidates applying for

Revaluation only are eligible to apply for Review.


19. PROVISION FOR WITHDRAWAL FROM EXAMINATION:

19.1 A student may, for valid reasons, (medically unfit / unexpected family

situations / sports approved by Chairman, sports board and HOD) be granted

permission to withdraw from appearing for the end semester examination in any

course or courses in ANY ONE of the semester examinations during the entire

duration of the degree programme. The application shall be sent to Dean,

Centre for Academics with required documents.




by the Head of the Department. It should be approved by the Dean, Centre for

Academics and Head of the Institution, which has to be forwarded to the

Controller of Examination.

19.2.1 Notwithstanding the requirement of mandatory 10 days’ notice, applications for

withdrawal for special cases under extraordinary conditions will be considered

on the merit of the case.


both in Marks Sheet as well as in Result Sheet. Withdrawal essentially requires

the student to register for the course/courses. The student has to register for

the course, fulfill the attendance requirements (vide clause 10), earn continuous

assessment marks and attend the end semester examination. However,

withdrawal shall not be construed as an appearance for the eligibility of a

candidate for First Class with Distinction.



clause 17.1.

20. AUTHORIZED BREAK OF STUDY FROM A PROGRAMME

20.1 A student is permitted to go on break of study for a maximum period of one


year as a single spell.

20.2 Break of Study shall be granted only once for valid reasons for a maximum of

one year during the entire period of study of the degree programme. However,

in extraordinary situation the candidate may apply for additional break of study

not exceeding another one year by paying prescribed fee for break of study. If a




applies to the Head of the Institution, through Dean, Centre for Academics, in

advance, but not later than the last date for registering for the end semester

examination of the semester in question, stating the reasons and the probable

date of rejoining the programme.




Regulations shall apply to the Dean, Centre for Academics, and Head of the

Institution, in the prescribed format through Head of the Department, at the

beginning of the readmitted semester itself for prescribing additional courses, if

any, from any semester of the regulations in-force, so as to bridge the curriculum

in-force and the old curriculum.



17.1).




of break of study in order that he/she may be eligible for the award of the

degree.




21. DISCIPLINE

21.1 Every student is required to observe disciplined and decorous behavior both


bring down the prestige of the College. The Head of Institution shall constitute a

disciplinary committee consisting of Discipline in charge, Two Heads of

Department of which one should be from the faculty of the learner, to enquire

into acts of indiscipline and notify the disciplinary action recommended for

approval.

20.2 If a learner indulges in malpractice in any of the internal or end semester

examination he / she shall be liable for punitive action as prescribed by the

college from time to time.


The college may from time to time revise, amend or change the Regulations,



23. SPECIAL CASES

In the event of any clarification in the interpretation of the above rules and

regulations, they shall be referred to the Standing Committee. The Standing

Committee will offer suitable interpretations/ clarifications /amendments

required for special case on such references and get them ratified in the next

meeting of the Academic Council. The decision of the Academic Council is final.


Code of Conduct for Students

Dress Code:

Regular

Boys should wear shirts (full or half sleeved) tucked into pants. Jeans and T- shirts

are not allowed. They should wear formal shoes with socks. Girls should wear

Chudidhar with Dupatta in a proper fashion. Midis, Miniskirts and Half Sarees are

not allowed.

Function

Boy participants should sport a necktie. Girls should wear a neat Saree or

Chudidhar with Dupatta. Very jazzy colours should be avoided. Well-polished

shoes should be worn.

Laboratories

Lab coats should be worn in all the Laboratories.

Workshop

Workshop dress should be worn as prescribed by the Department of Mechanical

Engineering and the Department of Civil Engineering.

Behaviour in and off the campus:

Every student of the College should conduct himself / herself in a befitting

manner, upholding the high traditions of the College. The students should

behave in a very courteous manner with everyone they come across. In

particular, they should be courteous and polite to their teachers and staff.

The students should conduct themselves with utmost dignity and decorum

when they attend both inter and intra-collegiate seminars, cultural shows or

other gatherings. They should not engage themselves in unwanted arguments

or scuffles.

Anna University has issued circular to all colleges that the student shall not

enter the colleges in inebriated condition, failing which they will be removed

from the college and they will not be allowed inside the college campus, so

that it will be a determent to the students.


Cell phone is banned in the academic area and in the College buses. If any

student is found using it, the Cell phone will be confiscated.

Attendance and Punctuality:

Regularity of attendance is a must for the students of Saveetha Engineering

College. The College insists on 100% attendance in classes as well as in

Laboratories.

A minimum of 75% attendance is required to appear for the University

examinations and those students with below 75% attendance will not be

permitted to appear for the exams. And, as per Anna University rules and

regulations, they will have to REDO that semester.

Punctuality in attending classes, submission of assignment and Laboratory

record are very much insisted upon in the College.

Leave for the students will be granted only with the prior permission of the

Principal and unauthorized absence will be liable for disciplinary action.

Merit certificates are given to students who secure 100% attendance

Identity Cards:

Identity cards would be issued to all the students of the College. The students

should wear their ID cards all the time while in the College/College Bus.

Payment of Fees:

Fees once paid will not be refunded at any cost. If any student wants to

discontinue in the middle of the course, he/she has to pay as per the college

norms.

Fees must be paid on or before the re-opening day of the academic year.

Environment and Surroundings:

A clean, attractive and healthy environment is always a pleasure to live in. Students

should make every effort to keep the campus as well as academic and hostel areas

very clean. Cleanliness should be given high priority. Every student should plant

and maintain a sapling in the College campus thus contributing to the over-all


beauty, greenery of the campus and leaving a permanent legacy when they leave

the institution.

Academic performance of Students:

All students are expected to put in their best efforts and study with utmost

sincerity. The College expects everyone to pass without any arrears. A special

counselling session will be conducted for students who fail to clear the University

examinations followed by a parent – HOD meet.

Participation in Extra / Co-curricular Activities:

NSS/YRC as well as Sports and Games are given utmost importance in the

College. It is therefore necessary that all the students should take active part in

these activities. They should also participate actively in all the Student Forum

activities organized by the Departments.

Safety of Valuables:

Students are advised not to keep valuables, cash etc., in classrooms, hostels,

common rooms or canteen. They should keep them safely as their personal

possessions. After the class is over they should take away their books and other

belongings. The College will not be responsible for the loss of these items.

Transportation:

Transport is optional. However, Students are advised to come to the college by the

college bus. Students are not permitted to come to college by two or four wheeler.

If under special circumstance, they have to come by two or four wheeler, they have

to pay a parking fee of Rs. 300/- per month.

Transportation Rules for Students

All the students travelling in the college bus should carry the bus pass or fee

receipt and produce bus pass at any time if demanded by the driver or the Bus

in charge of the college.


Those travelling in the bus without a bus pass will be fined Rs.5000/- for each

time and if necessary disciplinary action will also be taken.

The students should not change the boarding / dropping point, or routes

without proper permission and each request will not be entertained during the

middle of the semester.

The students travelling in the college bus should occupy the seats allotted to

them and should not create any disturbance to other students, driver and staff.

The students should not interact with driver during driving time.

Strict discipline should be maintained in the college bus.

The students should wear proper dress code.

Usage of mobile phones is strictly prohibited in college transport.

Identity cards would be issued to all the students of the college. The students

should have their ID cards with them all the time while in college bus.

A clean, attractive and healthy environment is always a pleasure to live in.

Students should make every effort to keep the bus area very clean.

Keep close the window when you are leaving from bus.

Every student of the college should conduct himself / herself in a benefiting

manner, upholding the high traditions of college. The students should behave

in a very courteous manner with everyone they come across. In particular, they

should be courteous and polite to their teachers and staff.

Getting Bonafide Certificates:

Students should submit a requisition letter for bonafide certificate and attestation

from the Principal through their Class Advisors and HoD only. Fee for Bonafide

Certificate for bank loan and passport is Rs 100/- and for in-plant training & mark

statement is Rs 10/- to be paid to the college office.

Dining:

Eating food, snacks and other eatables inside the class room is strictly prohibited.

Students are permitted to take their breakfast and lunch in the canteen.

Internal Assessment:

Internal marks are calculated for students as per Anna University guidelines.


Evaluation Method:

To evaluate the student’s performance in their academics, 2 CIA Exams and a

model exam are conducted. After the exams, the answer sheets are evaluated

within two days. The marks are entered in the college web portal for the parents

view and also the assessment sheets are sent to the parents.

Central Library:

The Central library is located in the First Floor of the main Circular Block in a

special and airy ambience. The Library has about 40,739 of books, National and

International journals are subscribed. The Library has the following sections:

Circulation Section

Reference Section

Journal Section

Internet Section

Reprographic Section

Most of the books needed for the various disciplines are available. A computerized

version of the accession register with details and location is made available to help

the students to have easy access. The College has also subscribed to reference

packages for various disciplines, whereby over 2500 international and national

journals could be accessed through the computer.

Use of Library facilities contribute to the academic excellence to a level

comparable to class room instruction. Therefore, students are requested to utilize

the facilities and services, while adhering to the Rules & Regulations stipulated by

the Library.

The following are the Services and the guidelines to use them:

SERVICES PROVIDED HOW TO AVAIL

Registration of User account By producing Student Identity Card, each student can register for 4 User book accounts; Valid till completion of the course

Issue of Books One Book can be borrowed on each book account; Period of borrowing - 2 Weeks

Issue of Project Reports One Book account is a Project report-cum-Book account, on which either a Project report or Book may be borrowed.


Reservation of Books Students can reserve books on issue in advance; Can be borrowed as and when available

Reference Service Only inside the Library; No issue of Books

Electronic On-line Journals List is available with the Librarian and on home page of college portal

Property Deposit Counter As students are not allowed to take their belongings into the Library, a Property Deposit Counter functions at the entrance

Xerox facility Low cost Xeroxing available in the Library

List of e-Journals

IEEE WILEY and MIT Press

ebooks – Text and Reference

http://ieeexplore.ieee.org

IEEE IEL (IEEE conference. IET Journals,

Conference, proceedings)

http://ieeexplore.ieee.org

Science Direct

http://www.sciencedirect.com/

ASME

http://asmedigitalcollection.asme.org

IEI Journals

www.ieindia.org

EBSCO

http://search.ebscohost.com

Membership

Membership is open to all the staff and students of the college using the Barcode on their College ID Card.

User Access

The issue of books will be regulated as follows:

Designation No. of Books Period of Borrowing

Students 4 2 Weeks

Staff 6 6 months

Non-Teaching Staff 2 2 months

P.G Students 6 2 weeks

Rules and Regulations

http://ieeexplore.ieee.org/

http://ieeexplore.ieee.org/

http://www.sciencedirect.com/

http://asmedigitalcollection.asme.org/

http://www.ieindia.org/

http://search.ebscohost.com/


Working Hours:

College library works from 8.00 a.m to 8.00 p.m. from Monday to Friday and

from 8.00 a.m to 4.00 p.m on Saturday, except the second & fourth Saturday. The

issue counter is open throughout the day without any break.

Borrowing Procedure:

Student member can get the books from the Library only on producing their

identity cards issued by the College.

Books are not transferable. Members are responsible for all the books borrowed

on their account.

Student members should produce their identity cards at the time of borrowing

and returning books.

If a back dated project report is required, it will be issued only one at a time per

student instead of a book.

All student members should return all the books at the end of the final year and

obtain “No Due Certificate” from the Library. Similarly the staff member who

intends to leave the College should return the books, settle all the dues and obtain

a “No Due Certificate” from the Library.

Issue and Return of Books:

Reference books and journals will not be issued.

Renewal of book will be permitted, if there are no reservations against these

books. For renewals, books have to be presented physically to the Library along

with Student’s college ID by himself or herself.

Members before leaving the counter must satisfy themselves as to whether the

books which they borrow are in good condition. Any damage should be

immediately reported to the Librarian, failing which, the member to whom the

book is issued will be held responsible for the said damage.

Books that are in special demand may be lent out for short period as may be

necessary and book lent out may be returned at any time, if required.

Absence from the College will not be admitted as an excuse for the delay in the

return of the books.


Overdue Charges:

The following overdue charges will be levied, if the books are not returned to the Library on the due dates:

Rs.1 / day / book Rs.10/ day/ project report

Loss of Books:

Loss of books, if any, shall be reported to the Librarian immediately and it shall

be replaced by another copy. In case the borrower is unable to replace the lost

books, thrice the cost of books plus overdue charges, will be levied.

Reservation of books:

Members can reserve the books, which are already issued. The reserved books,

after their return, will be kept at the counter for two days for issue to those who

have reserved. If they fail to collect the books within two days, the books will be

given to the members in the waiting list.

General:

All the student members should produce their identity cards to the security staff,

if required.

All the members shall enter the library entrance using ID cards.

All the members shall sign in the register at the entrance of the Library as a token

of their acceptance to adhere to the rules of the Library.

On no account, personal books, files and other articles (except a small note

book/ loose sheets of paper) will be allowed inside the Library. Such books, files

and articles shall be deposited at the property counter at the entrance.

Strict silence shall be observed inside the Library.

Mobile phones should be kept in silent mode.

Any marking or writing inside the books by the members is strictly prohibited.

A member shall be held responsible for any damage done by him/her to the

book or property.

Misbehaviour in the Library will lead to the cancellation of membership and also

lead to serious disciplinary action.


In general, the users of the library, are politely insisted to adhere to the above said

rules & regulations and realize that the library is a storehouse of wisdom &

knowledge and develop the love for learning.

AMENITIES (COMMON FACILITIES)

Hostel Facilities

Saveetha Engineering College has two separate hostels, one for girls and the other

for boys. The hostels are situated within the campus and are located within walking

distance from the academic blocks. All the needs of the inmates are given

immediately, so as to provide a homely atmosphere.

The present hostels are provided with facility for accommodating 500 boys and

516 girls with single rooms, double occupancy and dormitory types. A very unique

feature of the hostel is that 50% of the rooms have been provided with baths

equipped with individual geysers. All rooms have provisions to connect to the

common Internet facility, and have plug-ins for computers and telephones. Tables,

chairs, separate onward and decently made furniture complete the ensemble.

The Hostels have the following facilities:

24 Hours RO Water supply

Windmill with 1KW capacity

Wi-Fi internet facility

The Hindu, Indian Express, Deccan Chronicle newspapers

Separate T.V Hall

Modern Kitchen

Spacious & well ventilated Dining Hall

Internet Room

TV Room

Indoor Games Hall

Visitor’s Hall

24 Hours Security

Excellent House Keeping facility

Sanitary napkin Dispenser

Dhobi Facility

Cloth Drying Hall

Solar panel with 1.2 K.W capacities


Admission to Hostels:

The admission to the hostel is open to all students of Saveetha Engineering

College. Though the college shall make all possible efforts to provide

accommodation to all desiring students, Accommodation cannot be guaranteed

and admission to hostels will be on a first come first served basis. Students as

well as Parent / Guardian shall comply strictly with the hostel rules and

formalities of admission for seeking admission into the hostels.

Every student admitted to the hostel shall pay a caution deposit, which will be

refunded at the end of the course. The mess charge, room rent and

establishment charges will be notified from time to time.

Admission to the hostel is made for one year only with no right to admission

for the next year.

The Warden has every right to refuse admission or expel anyone without

assigning any reason.

No student is allowed to vacate the hostel in the middle of an academic year. If

anyone is

vacating in an extra-ordinary circumstance with the approval of the Principal,

the room rent and amenities charges will not be refunded.

Students detained in a class and those expelled from hostels will not be

provided accommodation in the subsequent years.

Hostel Rules and Regulations

No student is allowed to stay in the hostel without the prior approval of the

College authorities.

The allotment of room shall not be changed without the prior written approval

of the Warden.

No student is allowed to vacate the hostel in the middle of an academic year.

The room rents and charges for amenities will not be refunded.

The inmates of the hostels should not stay in their rooms during the working

hours of the

College. In case they do, they should take prior permission from the hostel

Warden, indicating clearly the reason for their staying in the hostel rooms.


Inmates of the Girls hostel should be in their rooms by 5.30 P.M and those of

the Boys hostel by 8.00 p.m. Inmates will not be permitted to enter or leave

the hostel after this time. Bio-Metric Attendance should be punched daily

between 8.00 p.m to 9.00 p.m for boys and between 7.00 p.m to 8.00 p.m for

girls. Those who would like to be away for any specific reason should obtain

prior permission of the Principal to do so. Study hours are mandatory from

8.30 P.M to 10.30 P.M.

Strict silence must be maintained and the students should be in their rooms

during the study hours. The local guardian’s address and phone number along

with the parent’s approval for the local guardian should be furnished in the

application form for the hostel. No visitor, other than those approved by

parents will be permitted to visit the inmates. They should visit the students

before 6.00 PM.

Students who were absent themselves for ten days or more from the hostel

would be removed from the rolls of the hostel. They should take prior

permission from the Principal to do so, and obtain a pass from the Warden or

else they would be severely dealt with. Leave of absence will be normally

granted only with the permission of parent or guardian. Absence from the

hostel at night and beyond the permitted time without the Warden’s prior

permission will be viewed very seriously and dealt with accordingly.

The furniture, fixtures and other equipment in the rooms are under the

responsibility of the inmate(s). If there are any damages, the cost of repair or

replacement will be collected from the concerned inmate. If this cannot be

fixed, the cost will be recovered collectively from all the inmates. And, in

addition to the cost of damage, an equal amount of fine will be levied.

Defacing the wall inside and outside of the room by writing slogans, damaging

the hostel property and such other antisocial acts will be viewed seriously and

dealt with accordingly.

Smoking and drinking is not allowed inside the college campus and in the

hostel.

Cell phone is strictly prohibited during study hours. If found using during the

study hours, it will be seized and surrendered to Principal Office.


Valuables and cash should not be kept in the hostel.

Electronic items like TV, FM radio, CD player, Camera, iPod, smart phone,

Induction Stove, Electric Rice cooker, hair dryer should not be used in the

rooms.

Computer and Laptops are not permitted for the first year students.

Hostel main door will be closed between 7.50 a.m. to 3.00 p.m. (during college

hours).

RAGGING IN ANY FORM IS STRICTLY PROHIBITED.

It is also clearly informed that ragging is banned by the Government of Tamil

Nadu. Any student involved in ragging will be expelled immediately not only

from the hostel but also from the College. Further, the students involved will

be handed over to the Police for appropriate action.

Hostel inmates are strictly prohibited from engaging themselves in any

undesirable activity such as smoking, drinking, gambling, consuming drugs,

etc., within the hostel premises. Any such activity will be viewed very seriously

and will result in the immediate expulsion of the student from the hostel as

well as from the College.

Inmates shall not hold any meetings inside the hostel premises. Celebration of

birthdays is strictly prohibited inside the college and hostel premises.

Students who are absent on the reopening day of the college shall be deemed

to have joined the mess on the reopening date, unless they have a written letter

from the parent or guardian, duly approved by the Principal. They would

otherwise be charged the normal rates. Once a student joins the mess, he / she

would be deemed to have become a continuous member and he/she would be

charged till he/she vacates the hostel officially.

The mess timings are as follows:-

YEAR / TIME BREAKFAST DINNER

I YEAR 06.45-07.15 a.m. 07.00-07.30 p.m.

II YEAR 07.00-07.30a.m. 07.15-07.45 p.m.

III YEAR 07.15-07.45 a.m. 07.30-08.00 p.m.

IV YEAR 07.15-07.45 a.m. 07.30-08.00 p.m.

Holiday & Sunday 07.30-08.30 a.m. 07.00-08.30 p.m.


Food shall not be served in the rooms under any circumstances. If the inmate

is ill, the Warden would make necessary arrangements for the service.

Inmates of the hostels should not enter into the kitchen.

Strict discipline and a noise-free atmosphere should be maintained in the

dining hall and in the hostel corridors. Any violation would lead to severe

disciplinary action and expulsion from the hostel.

Day scholars are not entertained as guests in the hostel / mess. No visitor,

friends or guests shall be allowed to enter or stay in the hostel

Any complaint regarding the mess should be brought to the notice of the

Warden in writing and students should not deal directly with the mess staff.

The hostel generally would remain closed during the vacations. During this

period the residents are not permitted to stay in the hostel, since maintenance

work has to be taken up then.

In all matter of hostel discipline, the decision of the Chief Warden/President

shall be final.

Notwithstanding any of the rules and regulations cited above, the

Hostel/College authorities reserve the right of changing the rules and

regulations, depending on the exigencies of the situation.

Students can avail TV and Gym facility in hostel but should strictly maintain

the timings.

Important Rules

All the students are instructed to collect your gate pass 24 hours before your

journey time. In case of emergency you can ask special permission from

warden. Students should get their Gate Pass only between 7.00 p.m to 8.30 p.m

daily.

All the students are instructed to keep their ID card with them, whenever they

are leaving the hostel campus. Students should show the ID card if they are

asked to do so.

All the students should give Bio-Metric attendance between 9.00 p.m to 9.30

p.m for boys and between 7.00 p.m to 8.00 p.m without fail. If failed will be

fined and punished.


Responsibilities

1) The most important and foremost responsibility of hostel warden is to take can

of student discipline clear disputes amongst them between students & faculties

of various departments via., maintenance, security, mess, sweepers etc. Support

them with their needs in various fields and solve it, if there are any grievances

with their regard.

2) To take care of mess in terms of food quality, quantity, maintaining timing

discipline cleanliness and mess facilities & student relationship.

i) Should monitor the cleanliness with respect to dining hall (table room and

wastage maintenance kitchen along with faculty dress code & neatness)

ii) Should check the quality of groceries& the materials purchased by

catering services.

iii) Should take care of mess timing for breakfast (7.00am to 8.15am), lunch

(11.45am to 1.30pm) and dinner (7.00pm to 8.15pm) respectively.

iv) Should take care of student crowd in the mess and deal the problems

related to senior junior of various departments and also student mess

faculty deals.

v) Instruct the student occasionally to keep the table clean, which reduce the

insets and dust in the floors.

vi) Check the food quality before it is delivered the students and if any issues,

intimate the same to the mess in-charge and clear the disputes regarding

that.

vii) Security in-charge for mess will open and close the mess door inside and

outside during dinner.

viii) Check whether refrigerator is working properly inside the mess hall. If it

is not working, inform the supervisor and clear it.

ix) Instruct the students not to wash their hand in the refrigerator water &

warn them if they do.

x) Due to unavoidable situations if any of the menu item cannot be followed

that day, the in -charge should intimate to all the students through

whatsapp group via student representative who will be appointed during

the start of the academic year.


xi) We should convince the students to adjust for one time if there is any

shortage of food and alternative food arrangement has to be made as per

the need.

xii) Check for proper operation of all electrical machine (lights fans) &

internals and if anything is required, report to the supervisor for proper

maintenance.

xiii) Visit mess, kitchen, wastage dumping area and the dining area and check

the given number of tables and other mess facilities.

3) Allot rooms to students as per the allocation done by admission office mentioned in admit card and follow the procedures which needs to be followed.

i) Check whether he is actually belongs to our hostel and then find whether

he is for single attached or 2 in 1 or single common or Dormitory or 8 in

1 room.

ii) Collect his admit and check his hostel ID card, cross verify if and

allotting the rooms after verifying the rooms which should be cleared &

maintained proper.

iii) Collect all details from him and create an account for him is hostel

software immediately after creating a biometric ID for him.

iv) Explain the terms & conditions of our hostel attached as Annexure 1 and

instruct him to be on time & register his finger daily in biometric machine

below 7.00pm to 8.00pm.

v) Introduce him to all the facilities & the rules to be followed inside the

hostel in the campus.

4) Clearance of student disputes by raising complaint in the note book kept in security table.

i) Clearing carpentry related problems by the same way.

ii) Clear water related (tap water) problems by raising complaint to

maintenance department.

iii) Clear civil related problems by raising complaint to supervisor sir or

directly to civil Engineer..

iv) Change of rooms initiated by students should be provided & follow it up

and check whether it gets cleared by admission office.

v) Clear student dispute & student faculty disputes.


Student Discipline

1) Student punctuality

i) Morning, students should leave the hostel gate before 7.45 a.m.

ii) Evening students should enter hostel Gate before 7.00pm and any violation

should be warned.

iii) Should monitor students’ study time (8.30 p.m. to 10.30 p.m.)

2) Should monitor students discipline in term of attendance and leave application and

should be warned if violated.

3) If the students celebrate by cutting cakes or brings food dishes without knowledge

of any one of the wardens, he should be warned strictly.

4) If he waste water or keep the fans and lights ON while leaving hostel, he should be

warned.

5) Some exceptional cases like using bathroom as latrine should be warned commonly.

6) Certain cases like cigarette smoking, tobacco usage should be warned and punished.

7) Students going out without proper permission should be warned & the information

should be passed on to their parents.

8) Continuous violation of rules and regulation by a particular student should be taken

to the Principal and necessary action should be taken.

Co-Curricular Activities

Co-curricular activities are carried out with in the Campus through the Students

Forums. Students are encouraged by the respective Class Advisors to participate in

co-curricular activities outside the College.

Extra-Curricular Activities

Extra-curricular talents are nurtured and developed in SEC with the guidance of

Faculty Advisors and by providing the necessary facilities.

Students’ Forums & Cell

All the Engineering Departments have their own Students’ Forum, which enable

students to develop their personality through participation in different programmes

organized by students for the benefit of students. Science & Humanities


Department has 2 Forums- ELITE Language Forum and SPECTRUM Science

Forum.

List of Forums

CIVIL Students’ Forum

CSE Students’ Forum

ECE Students’ Forum

EEE Students’ Forum

EIE Students’ Forum

BME Students’ Forum

IT Students’ Forum

Mechanical Engineering Students’ Forum

SPECTRUM Science Forum

M.B.A Students’ Forum

IEEE Students’ Forum

IEI Students’ Forum

Robotics Club

MEMS Club

Applied Mathematics Club

Satellite Club

Achievers Club

Medical Equipment Club

Chip on Brain Club

Lab on Chip Club

Embedded Club

Srinivasa Ramanujan Mathematics Club

Raman Club

Shakespeare Club

Reading Club (To be Inaugurated in EVEN SEM)

Public Speaking Club (To be Inaugurated in EVEN SEM)

Techcom Club

Photography Club (Savee Eyes)


Go green (Green Army) Club

Finance Club

HR Club

Project Club

Agronomy Club

Horticulture Club

Food Science Club

Student Farm Club

Prakruthi Club

Vikaas Club

Mint Club

Designer Club

IEI Students Chapter Club

SAE Collegiate Club IETE Student Forum

ISTE Chapter

Computer Society of India

ICT Academy of Tamilnadu

National Service Scheme

National Cadet Corps

Indian Institute of Chemical Engineers

Instrument Society of India (ISOL)

The Institution of Engineering and Technology (IET) on Campus

Higher Education/Competitive Examination Cell

Entrepreneurship Management Development Cell

Human Resource Development Cell

Women Development Cell

IQAC and ISO

Yoga & Meditation Club

Cultural Club

Android Application Development Club

Youth Red Cross

Kani Tamil Peravai


Alumni Association

Placement and Training Cell

Intellectual Property Rights (IPR) Cell

Laboratories and clubs established by SEC

Van Rossum Lab worth of 20 Lakh

Redhat academy

Big Data analytics Centre of Excellence

Cloud computing Centre of Excellence

Automation anywhere Centre of Excellence

Amazon web service club

Sales Force

Fluid Mechanics for chemical worth of 4 Lakh

Organic Chemistry Lab worth of __

Cyber security worth of 10 lakh

Post Gravest Engineering Lab

Diagnostics & Therapeutic Equipment lab of medical Electronics

Medical Equipment Lab worth of 20 lakh

MEMS lab in ECE Department with Intellisuite Software worth of 15 Lakh

Robotics Lab in ECE Department

KULI lab in Mechanical Department with 15 licenses worth of 3.34 Crores obtained free

Center for Innovation – funded by IEDC through DST is likely to be approved.

Watt Club- This club has installed a 1.2 KW solar power plant to serve the reading hall of the library.

Wipro Mission 10X Technology learning Centre.

SAE India Collegiate Club

Tech Comm Club

Satellite club

VLSI Club

Robotics Club

Achievers Club

MATLAB Club

CSI students Chapter

College has applied for about 10 patents. A Patent was granted for “Automatic DD Issuing System” (ECE department).


List of MOU and Industry Institute Interaction:

M/s. INFOSYS LTD. [Campus Connect Program]

M/s. FORD INDIA PVT. LTD

M/s. IBM

M/s. BIGTEC SOLUTIONS PVT. LTD.

M/s. INTELLISENSE CORPORATION, USA

M/s. LEMALABS TECHNOLOGIES PVT. LTD.

M/s. ICT ACADEMY OF T.N

M/s. UTL TECHNOLOGIES LIMITED

M/s. ADROIT CAD SOLUTIONS, CHENNAI

M/s. SPICE, COIMBATORE

M/s. UDVAVISK TECHNOLOGIES PVT.LTD

M/s. M.D. AUTOMATIONS& CONTROLS

M/s. ERPLABs

M/s. TECHNOCRAT AUTOMATION

M/s. PANTECH SOLUTIONS

M/S BLAER MOTORS Pvt. Ltd, CHENNAI -47

M/s. THE NATIONAL INSTITUTES OF WIND ENERGY

M/s. K.R INDUSTRIES,

M/s. PROLIFIC SYSTEMS & TECHNOLOGIES PT. LTD.

M/s. UTL TECHNOLOGIES LTD.

M/s. MAGOOSH – LEARNERS CORTEX Ltd

M/s. RED HAT INDIA PVT. LTD.

M/s. HINDUSTAN NYLONS, Miraj, India

M/s. CII- TITAN MODEL CAREER CENTRE

M/s. Ma Foi Strategic Consultants Pvt Ltd.

M/s. Capgemini Technology Services India Limited

M/s. LIVEWIRE Training Services Pvt Ltd.

M/s Education Matters

M/s. TREND Instrumentation and Automation Pvt.Ltd.,

M/s. Indo Malaysian Castings


M/s. AIMST Univesity, Malaysia

M/s The Commissioner of Technical Education

M/s. Emergway Academy Pvt Ltd.

M/s. Macbro Technology Pvt Ltd

M/s. KAIZENTRIC TECHNOLOGIES PVT. LTD

M/s. PURDUE UNIVERSITY COLLEGE OF ENGINEERING

M/s. SAVEETHA INSTITUTE OF MEDICAL AND TECHNICAL SCIENCES

(SIMATS)

M/s. SAVEETHA COLLEGE of PHYSIOTHERAPY

Sports & Games:

Students in Saveetha Engineering College are encouraged to participate in sports and

games not only to take part in competitions but also to improve their physical and

mental strength. Playground are neatly laid and maintained for the following games:

Athletic track and field

Football field

Volley ball court, outdoor badminton court

Ball badminton court

Throw ball court

Lawn tennis court

Cricket ground

Gymnastic centre

Staff recreation club

Yoga meditation hall

Chess hall

Indoor games are also being facilitated in the hostel premises.

Students are encouraged to participate in sports & games activities not only for

improving their health but also for participation in competitions in University level

events.


First year students are trained vigorously from the commencement of the first year

in order to participate actively in Sports and Games activities.

All the students should take part in any one of the Sports activities.

Placement

An active Placement Cell is functioning with a Placement Officer and Placement

Committee consisting of faculty members and student representatives from each

department.

A Full-Time Placement Officer helps in preparing the students for Aptitude Tests

and Interviews, and in organizing interviews (on & off campus) for the students

with reputed Engineering/IT Companies.

Our placement cell is constantly working towards the ultimate goal of the student’s

employment in the industry or to begin a business venture in which they are guided

to achieve phenomenal success. The cell organizes activities & workshop that

enable students to be team leaders & team players.

The placement and training Centre helps in conducting group discussions, mock

interviews, and personality development workshops etc. that focus on confidence-

building, written & oral communication, positive attitude, stress management &

leadership qualities. Language laboratories help in improving the pronunciation,

intonation and pause while articulating.

In addition, the placement cell organizes industrial visits & training for the students.

This in turn enables them to acquire jobs with best employers in the professional

world & help in gaining tremendous exposure & practical knowledge.

Further, the cell is engaged in networking with the best companies & invites them

for campus interview to ensure good placement for the students.

Alumni Association

SEC has started building its Alumni Association with every former student

automatically becoming a member of the SEC Alumni Association. Mr. N. V.

Ravindhar (Asst.Prof/CSE) is presently the Honorary Secretary of the Alumni

Association.


Transport

The College flies 58 Buses in designated routes covering the entire Chennai area so as to

enable the students to get bus service within walkable distance from their residence. For

availing the bus service, students need to pay the required fees at the beginning of each

academic year.

ATM

Indian bank ATMs are available inside the campus, which has tie-up with Visa, UTI and

other leading Credit/Debit cards.

Internet

Free Internet browsing LAN and Wi-Fi facility is available in the following locations inside the Campus:

All Laboratories.

Central Library

Men’s Hostel

Ladies Hostel

Social Service

The College provides ample opportunities for participation of students in Social service

through NSS, Youth Red Cross and Red Ribbon Club. Faculty Advisor of Social Service

Activities coordinates with the Anna University and other external agencies.


Faculty List

Science And Humanities

Mathematics

1 Dr. J. Joy Priscilla Asso. Prof & Head

2 Ms. K. Ruth Isabels Asso. Prof

3 Dr. V. Anandan Asso.Prof

4 Ms. V. Kavitha Asst. Prof (SG)

5 Ms. N. JegaJothi Asst. Prof (SG)

6 Ms. V. N. Jayamani Asst. Prof (SG)

7 Mr. M. Ramesh Kumar Asst. Prof (SG)

8 Ms. A. Mahalakshmi Asst. Prof (SG)

9 Ms. H. Mary Henrietta Asst. Prof (SG)

10 Mr. H. Prathab Asst. Prof (OG)

11 Mr. N. Kavitha Asst. Prof (OG)

12 Mr. V. Kamalakannan Asst. Prof (OG)

13 Mr. K. Thirumalai Asst. Prof (OG)

14 Ms. P. S. NarmathaDevi Asst. Prof (OG)

15 Ms. M. Gayathri Lakshmi Asst. Prof (OG)

16 Mr. T. Nithya Asst. Prof (OG)

17 Mr. V. P. Murugan Asst. Prof (OG)

18 Ms. K. Ashwini Asst. Prof (OG)

19 Mr. L. Vigneshwaran Asst. Prof (OG)

20 Dr. M. Kalyana Sundraram Asst. Prof (OG)

21 Mr. V. Karthick Asst. Prof (OG)

22 Mr. D. Jeno Francis Asst. Prof (OG)

PHYSICS

1 Dr. A. R. Lakshmanan Professor

2 Dr. M. Priya Professor

3 Dr. S. Suresh Asso.Prof

4 Ms. L. Sangeetha Asst. Prof (SG)

5 Dr. K. Sreevani Asst. Prof (SG)

6 Dr. K. S. Pugazhvadivu Asst. Prof (SG)


7 Ms. S. Varalakshmi Asst. Prof (SG)

8 Ms. C. Saveetha Asst. Prof (OG)

9 Mr. G. Suresh Asst. Prof (OG)

10 Mr. P. Muralimanohar Asst. Prof (OG)

11 Ms. K. Vishnu Priya Asst. Prof (OG)

12 Mr. K. Sathya Moorthy Asst. Prof (OG)

13 Dr. A. R. Baby Suganthi Asst. Prof (OG)

14 Ms. K. Ayisha Begam Asst. Prof. (OG)

15 Dr. S. Thennarasu Asst. Prof. (OG)

16 Mr. P. Vinoth Kumar Asst. Prof. (OG)

17 Dr. J. B. Sudharsan Asst. Prof. (OG)

CHEMISTRY

1 Dr. S. Bharathi Asso.Prof

2 Dr. M. Mettilda Asso.Prof

3 Dr. P.A Vivek Anand Asso.Prof

4 Ms. J. Latha Asst. Prof (SG)

5 Ms. B. Yamini Asst. Prof (SG)

6 Dr. K. Narendran Asst. Prof (SG)

7 Ms. B. Brindha Asst. Prof (OG)

8 Mr. S. Dhanasekar Asst. Prof (OG)

9 Dr. A. Saravanan Asst. Prof (OG)

10 Dr. A.Kalaivani Asst. Prof (OG)

11 Ms. P. Solainayagi Asst. Prof (OG)

12 Dr. Nirmala Lawrence Asst. Prof (OG)

13 Dr. S. Anand Asst. Prof (OG)

ENGLISH

1 Ms. D. Sunitha DevaKumari Asst. Prof (SG)

2 Dr. K. Aruna Devi Professor

3 Ms. V. Hemalatha Asst. Prof (SG)

4 Mr. K. Parivendan Asst. Prof (SG)

5 Mr. G. Babu Asst. Prof (SG)

6 Ms. S. P. Moniza Ray Asst. Prof (OG)


7 Ms. P. Bhuvaneshwari Asst. Prof (OG)

8 Mr. S. Bharathi Kumar Asst. Prof (OG)

9 Ms. U. Sujatha Asst. Prof (OG)

10 Ms. A. Hemeem Asst. Prof (OG)

11 Ms. R. Arumbu Asst. Prof (OG)

Physical Education

1 Dr. A. Dominic Xavier Jamesh Physical Director

2 Mr. N. Sudhakar Asst. Physical Director

3 Ms. K. Gayathri Asst. Physical Director

AGRICULTURE ENGINEERING

1 Dr. M. V. Rangheswami Professor & Head

2 Dr. T. Selvakumar Professor

3 Dr. Shyama Debbarma Associate Professor

4 Dr. D. Ganapathi Asst. Prof (OG)

5 Mr. N. Vishnuvardan Asst. Prof (OG)

6 Ms. S. Sahieen Asst. Prof (OG)

BIO MEDICAL ENGINEERING

1 Dr. K. S. Vijaya Associate Professor

2 Dr. S. Manikandan Associate Professor

3 Dr. R. Yedhu Krishnan Asst. Prof (OG)

4 Mr. K. Sankar Asst. Prof (OG)

5 Mr. N. Shankar Asst. Prof (OG)

6 Ms. M. Fazilath Asst. Prof (OG)

CHEMICAL ENGINEERING

1 Dr. A. Kumar Professor & Head

2 Dr. A. Balasubramanian Asst. Prof (SG)

3 Dr. K. Kannan Asst. Prof (OG)

4 Ms. U. Ashadevi Asst. Prof (OG)


CIVIL ENGINEERING

1 Ms. M. Kalpana Asso Prof & Head

2 Dr. A. Chandran Professor

3 Dr. V. Subathra Devi Asso Prof

4 Dr.. Jailakshmi Menon Asso Prof

5 Dr. L.Kanagarathinam Asso Prof

6 Dr. Balambal Usha Asst. Prof (OG)

7 Mr. G. Sudharson Asst. Prof (OG)

8 Mr. M.G. Prathap Asst. Prof (OG)

9 Mr. M. Siva Kumar Asst. Prof (OG)

10 Ms. S. Padma Asst. Prof (OG)

11 Ms. N. Iswarya Asst. Prof (OG)

12 Mr. ChallaMallikarjuna Asst. Prof (OG)

13 Mr. M. Madhan Kumar Asst. Prof (OG)

14 Ms. C. Madhumati Asst. Prof (OG)

15 Ms. P. Aarthy Asst. Prof (OG)

16 Ms. T. Vasugi Asst. Prof (OG)

17 Ms. B. Abinaya Asst. Prof (OG)

18 Ms. D. Anburaja Asst. Prof (OG)

19 Ms. V. Ashwarya Lakshmi Asst. Prof (OG)

20 Ms. M. Jayapradha Asst. Prof (OG)

COMPUTER SCIENCE AND ENGINEERING

1 Dr. S. Godfrey Winster Professor &Head

2 Dr. P. Valarmathie Professor

3 Dr. N. Jayalakshmi Professor

4 Dr. S. Sasikumar Professor

5 Dr. G. Nagappan Professor

6 Dr. S. Hariharan Professor

7 Dr. R. Saravanan Asso. Prof

8 Dr. V. Perumal Asso. Prof.

9 Dr. M. Manickam Asso. Prof.

10 Mr. N. Vel Murugesh Kumar Asst. Prof (SG)


11 Mr. V. Loganathan Asst. Prof (SG)

12 Mr. D. Retheesh Asst. Prof (SG)

13 Ms. A. Manju Asst. Prof (SG)

14 Ms. K. Kalaiselvi Asst. Prof (SG)

15 Dr. K. Anand Asst. Prof (SG)

16 Ms. D. Gayathri Asst. Prof (SG)

17 Mr. G. Naresh Asst. Prof (SG)

18 Mr. K. Somasundaram Asst. Prof (SG)

19 Mr. P. V. Gopirajan Asst. Prof (SG)

20 Mr. N.V. Ravindhar Asst. Prof (OG)

21 Ms. S. Aruna Devi Asst. Prof (OG)

22 Mr. A. Sivakumar Asst. Prof (OG)

23 Ms. J. Jasmine Gabriel Asst. Prof (OG)

24 Mr. M. Joel John Asst. Prof (OG)

25 Ms. Sujatha R Asst. Prof (OG)

26 Mr. R. Pradeep Asst. Prof (OG)

27 Mr. T. R.Rajesh Asst. Prof (OG)

28 Ms. N. G. Abinaya Asst. Prof (OG)

29 Ms. R. Ramya Asst. Prof (OG)

30 Ms. S. Alagumani Asst. Prof (OG)

31 Mr. A. Pavithra Kannan Asst. Prof (OG)

M.E COMPUTER SCIENCE AND ENGINEERING

1 Dr.M.Vijay Anand Professor

2 Mr. N. Bharathiraja Asst. Prof (SG)

3 Ms. K. Mariammal Asst. Prof (OG)

4 Ms. C. Priya Asst. Prof (OG)

ELECTRICAL AND ELECTRONICS ENGINEERING

1 Dr. R.Senthil Kumar Professor & Vice Principal

2 Ms. Monica P Suresh Asso. Prof & Head

3 Dr. M. Ulagammai Asso. Prof

4 Dr. M. Joly Asso. Prof

5 Mr. C. Obed Otto Asso. Prof


6 Dr. G. Maheshwaran Asso. Prof

8 Mr. J. Anish Kumar Asst. Prof (SG)

9 Ms. Rathika Kannan Asst. Prof (SG)

10 Ms. S. Kavitha Asst. Prof (SG)

11 Ms. S. JoshibaPonmalar Asst. Prof (SG)

12 Mr. S. Joyal Isac Asst. Prof (OG)

13 Mr. L. Bala Kumar Asst. Prof (OG)

14 Ms. R. Divya Asst. Prof (OG)

15 Mr. P. Sathya Narayanan Asst. Prof (OG)

16 Ms. J. ShanmugaKani Asst. Prof (OG)

17 Mr. V. John Hentry Jose Asst. Prof (OG)

18 Mr. T. D. Suresh Asst. Prof (OG)

M.E - EMBEDDED SYSTEMS TECHNOLOGIES

1 Dr. P.Kani Rajan Asso. Prof

2 Dr. R. Mahalakshmi Asso. Prof

3 Ms. Pheba Cherian Asst. Prof (OG)

ELECTRONICS AND COMMUNICATION ENGINEERING

1 Dr. Srigitha S. Nath Professor & Head

2 Dr. C. SheebaJoice Professor

3 Dr. M. Selvi Professor

4 Dr. Shrivastav A. K Professor

5 Dr. P. Mangayarkarasi Professor

6 Dr. Beula Jackson Professor

7 Dr. R. Muthammal Professor

8 Dr. S. Praveen Kumar Professor

9 Dr. R. Mariappan Professor

10 Dr. M. Bindhu Asso. Prof

11 Dr. A. Anitha Juliette Asso. Prof

12 Dr. K. Indhumathi Asso. Prof

13 Dr. M. Vanitha Asso. Prof

14 Dr. M. Sathyapriya Asso. Prof

15 Ms. J. Jayalakshmi Asso. Prof


16 Mr. S. Karunakaran Asso. Prof

17 Dr. T. Sripriya Asso. Prof

18 Mr. J. Jaya Caleb Asso. Prof

19 Ms. V. Pushpalatha Asso. Prof

20 Ms. S. Asha Asso. Prof

21 Dr. K. Indhumathi Asso. Prof

22 Dr. R. Ganesh Babu Asst. Prof (SG)

23 Ms. E. T. Jaba Jasphin Asst. Prof (SG)

24 Ms. A. Hemamalini Asst. Prof (SG)

25 Ms. P. R. Buvaneswari Asst. Prof (SG)

26 Ms. D. Roshikka Asst. Prof (SG)

27 Ms. C.T. Kalaivani Asst. Prof (SG)

28 Ms. P. Rekha Asst. Prof (SG)

29 Ms. K. Anitha Asst. Prof (SG)

30 Ms. K. Sakthi Asst. Prof (SG)

31 Mr. T. Aravind Asst. Prof (SG)

32 Mr. M. Praveen Asst. Prof(SG)

33 Ms. T. Archana Asst. Prof(SG)

34 Mr. V. Santhuthira Pandi Asst. Prof (SG)

35 Ms. G. Keerthiga Asst. Prof (SG)

36 Mr. S. Nagarajan Asst. Prof (SG)

37 Ms. S. Adhavi Shri Asst. Prof (OG)

38 Mr. K. Arun Kumar Asst. Prof (OG)

39 Ms. Nancy Catherine I Asst. Prof (OG)

40 Ms. Elizabeth J.C Asst. Prof (OG)

41 Ms. S. Chithra Asst. Prof (OG)

42 Ms. S. Umamaheswari Asst. Prof (OG)

43 Mr. T. K. Srinivasan Asst. Prof (SG)

44 Ms. R. Geethalakshmi Asst. Prof (OG)

45 Mr. R. Jagadeshwaran Asst. Prof (OG)

46 Ms. S. Ramya Asst. Prof (OG)

47 Ms. Kalaipriya O. Saravanan Asst. Prof (OG)

48 Ms. Anitha Kumari Asst. Prof (OG)

50 Mr. G. Dinesh Ram Asst. Prof (OG)


51 Mr. M. Thirumalai Asst. Prof (OG)

52 Ms. Nadar Akila P Mohan Asst. Prof (OG)

53 Ms. P. Bhuvaneswari

Asst. Prof (OG)

54 Ms. T. R. Jaya Chandra Lekha

Asst. Prof (OG)

55 Ms. R. Lakshmi Thara

Asst. Prof (OG)

56 Mr. I. Ezhilarasan

Asst. Prof (OG)

57 Ms. V. Karthiga

Asst. Prof (OG)

58 Ms. Sowjanya.M

Asst. Prof (OG)

59 Ms. Rohini.M Asst. Prof (OG)

60 Mr. S. Kumaran Asst. Prof (OG)

M.E APPLIED ELECTRONICS

1 Dr. S. Dhandapani Professor

2 Ms. D. J. Pricilla Mary Asst.Prof(OG)

3 Mr. D. Lingaraja Asst.Prof(OG)

M.E COMMUNICATION AND NETWORKING

1 Dr. R. Ramesh Professor & Principal

2 Ms. K. Padma Priya Asst.Prof(SG)

3 Mr. J. Dhanancheziyan Asst. Prof (OG)

M.E - VLSI Design

1 Dr.V.Raj Mohan Professor

2 Ms. V. Gomathi Asst.Prof(OG)

3 Ms. Mahiz Mathi.P Asst.Prof(OG)

ELECTRICAL AND INSTRUMENTATION ENGINEERING

1 Ms. T. Merlin Inbamalar Asso. Prof &Head

2 Dr. R. Ganesan Professor

3 Dr A. R. Kalaiarasi Asso Prof

4 Dr. M. Malathi Asso Prof


5 Dr. A. Manonmani Asst. Prof (SG)

6 Dr. P. Sinthia Asst. Prof (SG)

7 Mr. M. Arivalagan Asst. Prof (SG)

8 Mr. F. Kavin Asst. Prof (OG)

10 Ms. B. Kiruthiga Asst. Prof (OG)

12 Mr. V. Nagarajan Asst. Prof (OG)

13 Ms. C. Jenisha Asst. Prof (OG)

14 Mr. Prabakaran.M Asst. Prof (OG)

MECHANICAL ENGINEERING

1 Dr. B.K. Gnanavel Professor & Head

2 Dr. V. Muthukumar Professor

3 Dr. N. Balaji Professor

4 Dr. M.Santhosham Professor

5 Dr. N. Rajarajeswari Professor

6 Dr. P. Palanisamy Professor

7 Dr. G. Gopala Rama Subramaniyan Professor

8 Dr. R. Ganesa Moorthy Professor

9 Dr. R. Ravi Raja Malar Vannan Asso Prof

10 Dr. A. Ramamurthy Asso Prof

11 Dr. S. Lakhsmanan Asso Prof

12 Dr. M. Muruganadam Asso Prof

13 Mr. S. Shenbagaraman Asst. Prof(SG)

14 Mr. V. Velmurugan Asst. Prof (SG)

15 Mr. Subburam.P Asst. Prof (OG)

16 Mr. Vijaya Rajan V Asst. Prof (OG)

17 Ms. Radhika C Asst. Prof (OG)

18 Mr. S. Elavarasan Asst. Prof (OG)

19 Mr. G.L. Arumparithy Asst. Prof (OG)

20 Mr. T. Karthikeyan Asst. Prof (OG)

21 Mr. P.L.Arun Asst. Prof (OG)

22 Mr. Ravi Kumar. H Asst. Prof (OG)

23 Mr. G. Sathiyaseelan Asst. Prof (OG)

24 Mr. R. Prakash Asst. Prof (OG)

25 Mr. G.R. Ram Prasath Asst. Prof (OG)


26 Mr. E. Leelakrishnan Asst. Prof (OG)

27 Mr. N. S. Natesh Asst. Prof (OG)

28 Mr. P. Amarnath Asst. Prof (OG)

29 Mr. N. Gnaneswaran Asst. Prof (OG)

30 Mr. S. Sathya Nayanan Asst. Prof (OG)

31 Mr. S. Myil Vaganan Asst. Prof (OG)

32 Mr. Jerome Nithin Gladson Asst. Prof (OG)

33 Mr. K. Anandharaj Asst. Prof (OG)

34 Mr. J. Vijayamithra Rayan Asst. Prof (OG)

35 Mr. S. Sridhar Asst. Prof (OG)

36 Mr. F. Felix Prabu Asst. Prof (OG)

37 Mr. P. Gopinathan Asst. Prof (OG)

38 Mr. S. Arun Kumar Asst. Prof (OG)

M.E CAD/CAM

1 Dr. G. Manimaran Professor

2 Mr. S. Sella Kumar Asst. Prof(SG)

3 Mr. D. Elancheziyan Asst. Prof (OG)

MEDICAL ELECTRONICS

1 Mr. Gnanasekar.A. K Asso Prof

2 Dr. M. Moorthi Professor

3 Ms. M. Prathisha Asst. Prof (OG)

4 Mr. U. Madhanlal Asst. Prof (OG)

5 Ms. R. Ishwariya Asst. Prof (OG)

INFORMATION TECHNOLOGY

1 Dr. G. NaliniPriya Professor & Head

2 Dr. R. Meenakshi Asso. Prof

3 Dr. K. Suresh Kumar Asso. Prof

4 Mr. N. Velmurugan Asst. Prof (SG)

5 Dr. M. Shobana Asst. Prof (SG)

6 Ms. S. Vidhya Asst. Prof (SG)

7 Ms. R. Raja Ramya Asst. Prof (SG)


8 Mr. S. Ilavarasan Asst. Prof (SG)

9 Ms. R. V. Aswiga Asst. Prof (OG)

M.E - SE

1 Dr. K. Dinakaran Professor

2 Ms. N. Kanagavalli Asst. Prof (OG)

3 Ms. P. Preethi Asst. Prof (OG)

MASTER OF BUSINEESS ADMINISTRATION

1 Prof. A. Gandhi Professor & Dean (I.I.I)

2 Dr. P. Umarani Professor & Head

3 Dr. N. Muthu Professor

4 Dr.R.Balaji Professor

5 Ms. J. Megala Asso.Prof.

6 Dr. A. Anupama Juliet Asso.Prof.

7 Dr. J. Michael Maria Dhas Asso.Prof.

8 Dr.V.Rohini Asst. Prof (SG)

9 Dr. Kabirdoss Devi Asst. Prof (SG)

10 Ms.Siji Joseph Asst. Prof. (OG)

11 Ms. S. Gomathie Priya Asst. Prof. (OG)

12 Mr. V.Malaravan Asst. Prof. (OG)

Training and Placement

1 Mr. Subramanian.S Asst. Prof. (SG)

2 Mr. M. Senthil Kumar Asst. Prof. (OG)

3 Ms. M.Hari Babu Asst. Prof. (OG)

4 Mr. Edwin Samraj .R Asst. Prof. (OG)

5 Ms. Karthika.I Asst. Prof. (OG)

6 Mr. M. Anbukkani Asst. Prof. (OG)


ACTIVITY CALENDAR 2019-2020 – ODD Semester (Tentative)

For all II, III & IV - UG & PG Classes

Week No.

Week-Starting

Date (Day-Monday)

B.E./B.Tech. II, III & IV Year

II year M.E/MBA

Remarks

1 24.06.2019 Commencement of Classes (24.06.19-

Monday)

Commencement of Classes (24.06.19-

Monday)

2 01.07.2019

3 08.07.2019

4 15.07.2019

5 22.07.2019

6 29.07.2019 CIA – I CIA – I

7 05.08.2019

8 12.08.2019 Bakrid/Edi (12.08.2019)

Independence Day (15.08.2019)

9 19.08.2019 Krishna Jayanthi

(23.08.2019)

10 26.08.2019 CIA – II CIA – II

11 02.09.2019 Drestein’19

(06.09.2019 & 07.09.2019)

Drestein’19 (06.09.2019 & 07.09.2019)

Vinayagar Chathurthi (02.09.2019)

12 09.09.2019 Muharam

(10.09.2019)

13 16.09.2019

14 23.09.2019 Model Practical

Examination Model Practical

Examination

15 30.09.2019 Model Theory

Examinations (03.10.2019)

Model Theory Examinations (03.10.2019)

Gandhi Jayanthi (02.10.2019)

16

07.10.2019

Ayudha Pooja(07.10.2019)

Vijayadasami (08.10.2019)

17 14.10.2019

Last Working Day

19.10.2019

18 21.10.2019 Anna University

Practical Examinations Anna University Practical

Examinations

Anna University Practical Examinations (21.10.2019) Deepavali

(27.10.2019)

19 28.10.2019

20

04.11.2019 Anna University Theory

Examinations Anna University Theory

Examinations

Anna University Theory Examinations (06.11.2019)

Miladi Nabi (10.11.2019)


SAVEETHA ENGINEERING COLLEGE

June 2019 (Tentative)

Date Day Schedule

Number of working days planned

Higher Classes First year

UG PG UG PG

MBA ME

1 Saturday

2 Sunday - - - - -

3 Monday

4 Tuesday

5 Wednesday Ramzan - - - - -

6 Thursday

7 Friday

8 Saturday

9 Sunday - - - - -

10 Monday

11 Tuesday

12 Wednesday

13 Thursday

14 Friday

15 Saturday

16 Sunday - - - - -

17 Monday

18 Tuesday

19 Wednesday

20 Thursday

21 Friday

22 Saturday

23 Sunday - - - - -

24 Monday 1

25 Tuesday 2

26 Wednesday 3

27 Thursday 4

28 Friday 5

29 Saturday 6

30 Sunday - - - - -

Total Working Day UG Higher Class = 06 PG Higher Class = Nil UG I Year Class = Nil PG I Year Class = Nil



July 2019 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Monday 1 1 1

2 Tuesday 2 2 2

3 Wednesday CSE Guest Lecture 3 3 3

4 Thursday 4 4 4

5 Friday Medical Elec. Guest Lecture – II & III year 5 5 5

6 Saturday 6 6 6

7 Sunday - - - - -

8 Monday 7 7 7

9 Tuesday 8 8 8

10 Wednesday ECE Guest Lecture – IV year Civil Seminar 1 9 9 9

11 Thursday 10 10 10

12 Friday IT Guest Lecture – II year & Civil Guest Lecture

11 11 11

13 Saturday - - - - -

14 Sunday - - - - -

15 Monday Bio Medical One day Seminar on Machine Learning, EEE Seminar on “Degeneration and Restructured Power Systems” – IV year Mech Industrial Visit (15 to 20)

12 12 12

16 Tuesday 13 13 13

17 Wednesday ECE Guest Lecture – III year 14 14 14


19 Friday 16 16 16

20 Saturday FDP in Algebra and Number theory(Mathematics)

17 17 17

21 Sunday - - - - -

22 Monday Mech Technical Seminar Series (Voice of Alumni)

18 18 18

23 Tuesday Civil Industrial Visit 1 19 19 19

24 Wednesday ECE Guest Lecture – II year 20 20 20


26 Friday MBA Work Shop NSE IT Guest Lecture & Agri Guest Lecturer

22 22 22

27 Saturday - - - - -

28 Sunday - - - - -

29 Monday IT Workshop – IV year 23 23 23

30 Tuesday IT Workshop – IV year Bio Medical Workshop on Artificial Intelligence & MBA Workshop

24 24 24

31 Wednesday 25 25 25

Total Working Day UG Higher Class = 25 PG Higher Class = 25 UG I Year Class= Nil PG = I Year Class = Nil



August 2019 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Thursday BME National Level Seminar 1 1 1 1

2 Friday EIE Workshop 2 2 2 2

3 Saturday Agri Industrial Visit 3 3 3 3

4 Sunday - - - - -

5 Monday EEE Industrial Visit - II year 4 4 4 4

6 Tuesday Mech Technical Seminar Series (Voice of Alumni)

5 5 5 5

7 Wednesday Medical Electronics Industrial Visit – II & III year

Civil Seminar 3 6 6 6 6

8 Thursday ECE Workshop on IoT-IV year 7 7 7 7

9 Friday CSE Guest Lecture 8 8 8 8

10 Saturday - - - - -

11 Sunday - - - - -

12 Monday Bakrid/Edi - - - - -

13 Tuesday Entrepreneurial resilience 9 9 9 9

14 Wednesday Online Trading & Security Analytics EEE Industrial Visit – III year

10 10 10 10

15 Thursday Independence Day - - - - -

16 Friday IT Workshop – IV year (16 & 17) 11 11 11 11

17 Saturday ECE Voice of Alumni Mech Industrial Visit

12 12 12 12

18 Sunday - - - - -

19 Monday EEE Seminar on “Overview of Modern Conterollers” – III year

Mech Guest Lecture Civil Guest Lecture 3

13 13 13 13

20 Tuesday 14 14 14 14

21 Wednesday 15 15 15 15

22 Thursday Agri Guest Lecture 16 16 16 16

23 Friday Krishna Jayanthi - - - - -

24 Saturday - - - - -

25 Sunday - - - - -

26 Monday IT Seminar – III year 17 17 17 17

27 Tuesday 18 18 18 18

28 Wednesday 19 19 19 19

29 Thursday MBA Tally Certification Courses 20 20 20 20

30 Friday National Seminar on Tools for Materials Research(Physics)

Civil Guest Lecture 1 21 21 21 21

31 Saturday 22 22 22 22

Total Working Day UG Higher Class = 22 PG Higher Class = 22 UG I Year Class = 22 PG = I Year Class = Nil



September 2019 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Sunday - - - - -

2 Monday Vinayagar Chathurthi - - - - -

3 Tuesday EEE Seminar on “Future trends in Electrial Engineering” – II year

1 1 1 1 1

4 Wednesday 2 2 2 2 2

5 Thursday CSE Seminar (5 & 6) 3 3 3 3 3

6 Friday ECE Industrial Visits-One day for each section – II & IV year

Guest Lecture in Communication skills(English) Agri & Civil Workship 1,2,3,4 (6 & 7)

4 4 4 4 4

7 Saturday ECE Industrial Visits-One day for each section – IV year

Mech Industrial Visit & Agri Workship 5 5 5 5 5

8 Sunday - - - - -

9 Monday - - - - -

10 Tuesday Muharam - - - - -

11 Wednesday Civil Industrial Visit 2 6 6 6 6 6

12 Thursday IT Workshop – IV year EIE One day Seminar

7 7 7 7 7

13 Friday ECE Industrial Visits – One day for each section – IIII year

8 8 8 8 8

14 Saturday 9 9 9 9 9

15 Sunday - - - - -

16 Monday Mech Industrial Visit 10 10 10 10 10

17 Tuesday 11 11 11 11 11

18 Wednesday MBA Industrial Visit Medical Electronics Student Workshop – II & III year

12 12 12 12 12

19 Thursday 13 13 13 13 13

20 Friday CSE Guest Lecture & MBA Workshop 4.0 14 14 14 14 14

21 Saturday 15 15 15 15 15

22 Sunday - - - - -

23 Monday 16 16 16 16 16

24 Tuesday MBA Workshop 4.0 17 17 17 17 17

25 Wednesday 18 18 18 18 18

26 Thursday 19 19 19 19 19

27 Friday IT Workshop 20 20 20 20 20

28 Saturday - - - - -

29 Sunday - - - - -

30 Monday Guest Lecture on Environmental Science(Chemistry)

21 21 21 21 21

Total Working Day UG Higher Class = 21 PG Higher Class = 21 UG I Year Class = 21 PG I Year Class = 21



October 2019 (Tentative)

Date Day Schedule



UG

PG UG PG

MBA ME

1 Tuesday 1 1 1 1 1

2 Wednesday Gandhi Jayanthi - - - - -

3 Thursday 2 2 2 2 2

4 Friday 3 3 3 3 3

5 Saturday 4 4 4 4 4

6 Sunday - - - - -

7 Monday Ayudha Pooja - - - - -

8 Tuesday Vijayadasami - - - - -

9 Wednesday MBA Voice of Alumini 5 5 5 5 5

10 Thursday 6 6 6 6 6

11 Friday National conference on Emerging Trends in Mathematical Science and Technology(Mathematics)

7 7 7 7 7

12 Saturday - - - - -

13 Sunday - - - - -

14 Monday Mech Industrial Visit 8 8 8 8 8

15 Tuesday 9 9 9 9 9

16 Wednesday 10 10 10 10 10

17 Thursday CSE FDP (17 to 19) 11 11 11 11 11

18 Friday 12 12 12 12 12

19 Saturday 13 13 13 13 13

20 Sunday - - - - -

21 Monday 14 14 14 14 14

22 Tuesday 15 15 15 15 15

23 Wednesday CSE Voice of Alumni 16 16 16 16 16

24 Thursday 17 17 17 17 17

25 Friday MBA International Conference (25 & 26) 18 18 18 18 18

26 Saturday - - - - -

27 Sunday Deepavali - - - - -

28 Monday 19 19 19 19 19

29 Tuesday 20 20 20 20 20

30 Wednesday 21 21 21 21 21

31 Thursday 22 22 22 22 22




November 2019 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Friday 1 1 1 1 1


3 Sunday - - - - -

4 Monday 3 3 3 3 3

5 Tuesday 4 4 4 4 4


7 Thursday CSE Hands on Training – Workshop 7 & 8) 6 6 6 6 6

8 Friday MBA FDP 7 7 7 7 7

9 Saturday - - - - -

10 Sunday Miladi Nabi - - - - -

11 Monday 8 8 8 8 8

12 Tuesday 9 9 9 9 9

13 Wednesday Mech Workshop 10 10 10 10 10

14 Thursday 11 11 11 11 11

15 Friday 12 12 12 12 12

16 Saturday 13 13 13 13 13

17 Sunday - - - - -

18 Monday 14 14 14 14 14

19 Tuesday 15 15 15 15 15

20 Wednesday Mech Faculty Development Program CSE FDP (20 to 22)

16 16 16 16 16

21 Thursday 17 17 17 17 17

22 Friday 18 18 18 18 18

23 Saturday - - - - -

24 Sunday - - - - -

25 Monday ECE FDP (25 to 30) 19 19 19 19 19

26 Tuesday 20 20 20 20 20

27 Wednesday 21 21 21 21 21

28 Thursday EIE FDP (21 to 30) 22 22 22 22 22

29 Friday 23 23 23 23 23

30 Saturday 24 24 24 24 24




December 2019 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Sunday - - - - -

2 Monday CSE Short Term Training Programme (2 to 6)

1 1

3 Tuesday 2 2

4 Wednesday 3 3

5 Thursday 4 4

6 Friday 5 5

7 Saturday 6 6

8 Sunday - - - - -

9 Monday 7 7

10 Tuesday 8 8

11 Wednesday 9 9

12 Thursday Medical Electronics FDP 2nd International Conference on Material & Spectroscopy (Physics-12&13)

10 10

13 Friday 11 11

14 Saturday - - - - -

15 Sunday - - - - -

16 Monday 1 1 1

17 Tuesday 2 2 2

18 Wednesday 3 3 3

19 Thursday 4 4 4

20 Friday 5 5 5

21 Saturday 6 6 6

22 Sunday - - - - -

23 Monday Mech Industrial Visit 7 7 7

24 Tuesday 8 8 8

25 Wednesday Christmas - - - - -

26 Thursday 9 9 9

27 Friday 10 10 10

28 Saturday - - - - -

29 Sunday - - - - -

30 Monday 11 11 11

31 Tuesday 12 12 12




January 2020 (Tentative)

Date

Day Schedule



UG PG UG PG

MBA ME

1 Wednesday New Year - - - - -


3 Friday Civil Seminar 4 2 2 2 2 2


5 Sunday - - - - -

6 Monday ECE Guest Lecture – IV year 4 4 4 4 4

7 Tuesday 5 5 5 5 5


9 Thursday ECE Guest Lecture – III year 7 7 7 7 7

10 Friday CSE Guest Lecture 8 8 8 8 8

11 Saturday Mech Technical Seminar Series (Voice of Alumni)

9 9 9 9 9

12 Sunday - - - - -

13 Monday - - - - -

14 Tuesday - - - - -

15 Wednesday Bogi - - - - -

16 Thursday Pongal - - - - -

17 Friday Mattu Pongal - - - - -

18 Saturday - - - - -

19 Sunday - - - - -

20 Monday International Conference on Resent trends in Chemistry and Materials(Chemistry) Civil Guest Lecture 4

10 10 10 10 10

21 Tuesday Agri Guest Lecture 11 11 11 11 11

22 Wednesday Medical Elec. Workshop - II & III year 12 12 12 12 12

23 Thursday 13 13 13 13 13

24 Friday 14 14 14 14 14

25 Saturday 15 15 15 15 15

26 Sunday Re-Public Day - - - - -

27 Monday Mech Industrial Visit (27 to 31), EIE One day Seminar, EEE Seminar & IT Industrial Visit

16 16 16 16 16

28 Tuesday 17 17 17 17 17

29 Wednesday IT Industrial Visit 18 18 18 18 18

30 Thursday 19 19 19 19 19

31 Friday 20 20 20 20 20




February 2020 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Saturday MBA Creknobs 1 1 1 1 1

2 Sunday - - - - -

3 Monday Mech Technical Seminar Series (Voice of Alumni) (3 to 7) & IT Seminar

2 2 2 2 2

4 Tuesday Guest Lecture in Listening skills(English) 3 3 3 3 3

5 Wednesday CSE International Conference (2 to 7) BME Workshop on Embedded Systems & IT Guest Lecture

4 4 4 4 4

6 Thursday IT Guest Lecture 5 5 5 5 5

7 Friday FDP on Research Paper Writing(Physics) &

Agri Industrial Visit & IT Guest Lecture 6 6 6 6 6


9 Sunday - - - - -

10 Monday IT Workshop 7 7 7 7 7

11 Tuesday Civil Guest Lecture 5 & IT Workshop 8 8 8 8 8

12 Wednesday ECE Guest Lecture – II year 9 9 9 9 9

13 Thursday CSE Guest Lecture 10 10 10 10 10

14 Friday 11 11 11 11 11

15 Saturday 12 12 12 12 12

16 Sunday - - - - -

17 Monday Mech Guest Lecture & Industrial Visit (17 to 21)

13 13 13 13 13

18 Tuesday 14 14 14 14 14

19 Wednesday ECE Guest Lecture – I year 15 15 15 15 15

20 Thursday Medical Electronics Industrial Visit – II & III year

16 16 16 16 16

21 Friday CSE Voice of Alumni & Civil Industial visit 17 17 17 17 17

22 Saturday - - - - -

23 Sunday - - - - -

24 Monday BME One Day Seminar on Machine Learning & IT Workshop

18 18 18 18 18

25 Tuesday Agri Guest Lecture & IT Workshop 19 19 19 19 19

26 Wednesday 20 20 20 20 20

27 Thursday EIE Workshop 21 21 21 21 21

28 Friday MBA Mock Parliament 22 22 22 22 22

29 Saturday 23 23 23 23 23




March 2020 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Sunday - - - - -

2 Monday 1 1 1 1 1

3 Tuesday 2 2 2 2 2


5 Thursday Civil Seminar 5 4 4 4 4 4

6 Friday 5 5 5 5 5


8 Sunday - - - - -

9 Monday 7 7 7 7 7

10 Tuesday 8 8 8 8 8

11 Wednesday IT Workshop (2 Days) 9 9 9 9 9

12 Thursday BME Guest Lecture CSE National Conference (12 & 13) IT Inter. Conference

10 10 10 10 10

13 Friday Agri Guest Lecture 11 11 11 11 11

14 Saturday - - - - -

15 Sunday - - - - -

16 Monday Mech Guest Lecture (16 to 20) 12 12 12 12 12

17 Tuesday 13 13 13 13 13

18 Wednesday ECE Department Colloquium Medical Electronics Guest Lecture – II & III year, FDP on Speaking in English and

Gen “Z” learners(English)

14 14 14 14 14

19 Thursday CSE Guest Lecture 15 15 15 15 15

20 Friday 16 16 16 16 16

21 Saturday Civil Conference 1 17 17 17 17 17

22 Sunday - - - - -

23 Monday Mech Project Expo (23 & 24) & EEE National Conference

18 18 18 18 18

24 Tuesday 19 19 19 19 19

25 Wednesday Telugu New Year - - - - -

26 Thursday Civil Industrial Visit 4 & IT Project Display 20 20 20 20 20

27 Friday 21 21 21 21 21

28 Saturday - - - - -

29 Sunday - - - - -

30 Monday 22 22 22 22 22

31 Tuesday EIE National Conference 23 23 23 23 23




April 2020 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME



3 Friday 3 3 3 3 3

4 Saturday ECE Voice of Alumni 4 4 4 4 4

5 Sunday - - - - -

6 Monday Mahaveer Jayanthi - - - - -

7 Tuesday CSE FDP (7 to 9) 5 5 5 5 5

8 Wednesday ECE Workshop 6 6 6 6 6

9 Thursday ECE Workshop 7 7 7 7 7

10 Friday Good Friday - - - - -

11 Saturday - - - - -

12 Sunday - - - - -

13 Monday 8 8 8 8 8

14 Tuesday Tamil New Year - - - - -


16 Thursday Civil Seminar 6 10 10 10 10 10

17 Friday CSE Seminar (17 & 18) 11 11 11 11 11

18 Saturday 12 12 12 12 12

19 Sunday - - - - -

20 Monday Mech Industrial Visit & Workshop (20 to 24)

13 13 13 13 13

21 Tuesday Civil Guest Lecture 6 14 14 14 14 14

22 Wednesday 15 15 15 15 15

23 Thursday 16 16 16 16 16

24 Friday 17 17 17 17 17

25 Saturday - - - - -

26 Sunday - - - - -

27 Monday Mech Faculty Development Program (1 week)

18 18 18 18 18

28 Tuesday 19 19 19 19 19

29 Wednesday 20 20 20 20 20

30 Thursday 21 21 21 21 21




May 2020 (Tentative)

Date Day Schedule



UG PG UG PG

MBA ME

1 Friday May Day - - - - -


3 Sunday - - - - -

4 Monday ECE FDP ( 4 to 6) 1 1 1 1 1

5 Tuesday 2 2 2 2 2


7 Thursday CSE Workshop-Hands on Training (7 & 8) 4 4 4 4 4

8 Friday 5 5 5 5 5


10 Sunday - - - - -

11 Monday 7 7 7 7 7

12 Tuesday 8 8 8 8 8


14 Thursday 10 10 10 10 10

15 Friday 11 11 11 11 11

16 Saturday 12 12 12 12 12

17 Sunday - - - - -

18 Monday 13 13 13 13 13

19 Tuesday CSE Short Term Training Programme 14 14 14 14 14

20 Wednesday 15 15 15 15 15

21 Thursday 16 16 16 16 16

22 Friday 17 17 17 17 17

23 Saturday - - - - -

24 Sunday - - - - -

25 Monday 18 18 18 18 18

26 Tuesday 19 19 19 19 19

27 Wednesday 20 20 20 20 20

28 Thursday 21 21 21 21 21

29 Friday 22 22 22 22 22

30 Saturday 23 23 23 23 23

31 Sunday - - - - -


Documents

CALENDAR - Saveetha Engineering College