CABLE TIE DIVISION MADE IN THE USA - American Elite … 2016 Catalog.pdf · CABLE TIE DIVISION. Understanding the AEM Part Number System ... 6.1” 0.096” 0.045” 1.2” 100 20,000

MADEIN THE USA

MOLDING OUR FUTURES TOGETHERTM

CABLE TIE DIVISION

Understanding the AEM Part Number System

B7S**-MH

General Purpose Polyamide 6.6General purpose nylon 6/6 features light weight, high strength and a wide temperature range. Even at higher than recommended temperatures or exposure to flame, nylon does not give off toxic or irritating by-products. Nylon 6/6 is Hygroscopic and, therefore, absorbs or releases moisture depending on its environment. Moisture level of the material will affect tensile strength, stiffness and elongation of the product.

Elite Cold Weather Ties Impact modified performance. Excellent in extreme cold.

Metal Detectable Used in areas around food and pharmaceutical industries where contamination may be an issue. Manufactured in teal blue for easy identification and impregnated with metal flakes for pick-up with magnets if dropped. Also, could help to prevent critical recall. Available in a variety of lengths and tensile strengths.

UV Stabilized Polyamide 6.6General purpose nylon 6/6 with increased resistance to ultraviolet light. Carbon black is one of the most effective stabililzers known today. A uniform dispersion of carbon black provides good ultraviolet light resistance without adversely affecting physical properties. The addition of carbon black or any other ultraviolet stabilizer prolongs the useful life of plastic products used outdoors, but it does not totally eliminate the destructive effects of the light.

Heat Stabilized Polyamide 6.6Polyamide 6.6 Heat Stabilized material has chemical stabilizers which offer additional benefits for use during higher continuous operating temperature applications.

Impact Modified, Heat Stabilized with Greater UV Protection Polyamide 6.6Impact modified Polyamide 6.6 offers heat resistance, flexibility and higher levels of UV resistance. Added features of this material include greater resistance to heat, sunlight and vibration for mobile applications.

Material Specifications

B5I0C UV Black 40 LB. 5.7 0.142 0.05 1.25 100 10,000 17 B5I0M UV Black 40 LB. 5.7 0.142 0.05 1.25 1,000 10,000 17 B5I9C Natural 40 LB. 5.7 0.142 0.05 1.25 100 10,000 17 B5I9M Natural 40 LB. 5.7 0.142 0.05 1.25 1,000 10,000 17 B8I0C UV Black 40 LB. 8.7 0.142 0.05 2.0 100 10,000 24 B8I0M UV Black 40 LB. 8.7 0.142 0.05 2.0 1,000 10,000 24 B8I9C Natural 40 LB. 8.7 0.142 0.05 2.0 100 10,000 24 B8I9M Natural 40 LB. 8.7 0.142 0.05 2.0 1,000 10,000 24

AEM Part Number Color Tensile Length Width Thickness

Bundle Diameter Bag Qty Case Qty

B4M0C UV Black 18 LB. 4.1 0.096 0.035 0.75 100 25,000 17 B4M0M UV Black 18 LB. 4.1 0.096 0.035 0.75 1,000 25,000 17 B4M9C Natural 18 LB. 4.1 0.096 0.035 0.75 100 25,000 17 B4M9M Natural 18 LB. 4.1 0.096 0.035 0.75 1,000 25,000 17 B6M0C UV Black 18 LB. 6.1 0.096 0.045 1.2 100 20,000 24 B6M0M UV Black 18 LB. 6.1 0.096 0.045 1.2 1,000 20,000 24 B6M9C Natural 18 LB. 6.1 0.096 0.045 1.2 100 20,000 24 B6M9M Natural 18 LB. 6.1 0.096 0.045 1.2 1,000 20,000 24 B8M0C UV Black 18 LB. 8.1 0.096 0.045 2.0 100 20,000 30 B8M0M UV Black 18 LB. 8.1 0.096 0.045 2.0 1,000 20,000 28 B8M9C Natural 18 LB. 8.1 0.096 0.045 2.0 100 20,000 30 B8M9M Natural 18 LB. 8.1 0.096 0.045 2.0 1,000 20,000 28



Case Weight (lb)

Case Weight (lb)

18 LB SERIES

40 LB SERIES

T: 1-888-463-3454 | F: 1-877-874-0811 | www.americanelitemolding.com 2 3

MADE in the USA

MADE in the USA

RECOMMENDED TOOLS FOR USE WITH THIS SERIES

Please call for information on all of our tension tools.

*B100*B200

LISTEDPOSITIONING DEVICE

TYPE 2128DR


TYPE 2128DR


TYPE 2128DR

QPL ListedCAGE CODE: 1WBB1

PLANT ADDRESS:American Elite Molding5680 John Givens RoadCrestview, FL 32539


*B200



TYPE 2128DR

181B - B/C

* 30 lb. marking on UL labeled products

Material Color FlammabilityWeathering Life Expectancy

OperatingTemperature

MaterialProperties

Polyamide 6.6 Min -40F Max +185F Natural, Black & Colors 1 to 3 years UL94 V2 High yield strength

Polyamide 6.6 UV Resistant

Min -40F Max +185F Black 5 to 9 years UL94 V2 High yield strength UV-resistant

Polyamide 6.6Heat Stabilized

Min -40F Max +221F Natural & Black Natural 1 to 3 yearsBlack 5 to 9 years

UL94 V2 High yield strengthElevated Max Temps

Polyamide 6.6Impact Modified


UL94 HB Limited BrittlenessGood at Low Temps

Polyamide 6.6Impact ModifiedHeat Stabilized


UL94 HB Limited BrittlenessGood at Low Temps andElevated Max Temps

Polyamide 6.6Elite Cold Weather

Min -40F Max +221F Black 5 to 9 years UL94 HB Limited BrittlenessGood at Low Temps andFlexible at Cold Temps

StylesMH = Mount HeadFTPM = Fir Tree Push MountR = ReleasableDL = Double Loop

Tensile StrengthM = 18lbI = 40lbS = 50lbL = 120lbH = 175lbX = 250lb

Cable Tie Length

Company Identification

Material/Color9 = Natural Nylon0 = UV BlackAH = Air HandlingHS = Heat StabilizedAW = All WeatherMD = Metal DetectableIM = Impact Modified

Bag PackagingM = 1,000D = 500C = 100L = 50Q = 25X = 10

B7S0C UV Black 50 LB. 7.6 0.18 0.054 2.0 100 10,000 30 B7S0M UV Black 50 LB. 7.6 0.18 0.054 2.0 1,000 10,000 30 B7S9C Natural 50 LB. 7.6 0.18 0.054 2.0 100 10,000 30 B7S9M Natural 50 LB. 7.6 0.18 0.054 2.0 1,000 10,000 30 B11S0C UV Black 50 LB . 11.1 0.18 0.054 3.0 100 5,000 21 B11S0M UV Black 50 LB. 11.1 0.18 0.054 3.0 1,000 5,000 21 B11S9C Natural 50 LB. 11.1 0.18 0.054 3.0 100 5,000 21 B11S9M Natural 50 LB. 11.1 0.18 0.054 3.0 1,000 5,000 21 B14S0C UV Black 50 LB. 14.6 0.18 0.054 4.0 100 5,000 26 B14S0M UV Black 50 LB. 14.6 0.18 0.054 4.0 1,000 5,000 26 B14S9C Natural 50 LB. 14.6 0.18 0.054 4.0 100 5,000 26 B14S9M Natural 50 LB. 14.6 0.18 0.054 4.0 1,000 5,000 26 B17S0C UV Black 50 LB. 17.2 0.18 0.055 5.0 100 5,000 31 B17S9C Natural 50 LB. 17.2 0.18 0.055 5.0 100 5,000 31



Case Weight (lb)

B8L0C UV Black 120 LB. 9 0.298 0.069 2.0 100 2,500 21 B8L9C Natural 120 LB. 9 0.298 0.069 2.0 100 2,500 21 B11L0C UV Black 120 LB. 12 0.298 0.069 3.0 100 2,000 22 B11L9C Natural 120 LB. 12 0.298 0.069 3.0 100 2,000 22 B14L0C UV Black 120 LB. 15 0.298 0.069 4.0 100 2,000 26 B14L9C Natural 120 LB. 15 0.298 0.069 4.0 100 2,000 26 B18L0L* UV Black 120 LB. 18 0.298 0.07 5.0 50 1,000 19 B18L9L* Natural 120 LB. 18 0.298 0.07 5.0 50 1,000 19 B28L0L* UV Black 120 LB. 28 0.298 0.07 8.4 50 500 16 B28L9L* Natural 120 LB. 28 0.298 0.07 8.4 50 500 16

*Not made in U.S.A.



Case Weight (lb)

50 LB SERIES

120 LB SERIES

175 LB SERIES

250 LB SERIES

T: 1-888-463-3454 | F: 1-877-874-0811 | www.americanelitemolding.com T: 1-888-463-3454 | F: 1-877-874-0811 | www.americanelitemolding.com

B18H0L UV Black 175 LB. 18.5 0.350 0.087 5.0 50 1,000 22 B18H9L Natural 175 LB. 18.5 0.350 0.087 5.0 50 1,000 22 B24H0L UV Black 175 LB. 24 0.350 0.087 7.2 50 500 15 B24H9L Natural 175 LB. 24 0.350 0.087 7.2 50 500 15 B30H0L UV Black 175 LB. 29.6 0.350 0.087 9.3 50 500 20 B30H9L Natural 175 LB. 29.6 0.350 0.087 9.3 50 500 20 B36H0L UV Black 175 LB. 36 0.350 0.087 11.0 50 500 22 B36H9L Natural 175 LB. 36 0.350 0.087 11.0 50 500 22 *B48H0L UV Black 175 LB. 48 0.350 0.087 15.0 50 500 27 *B48H9L Natural 175 LB. 48 0.350 0.087 15.0 50 500 27

*Not made in U.S.A.

B9X0L UV Black 250 LB. 9.0 0.49 0.09 2.5 50 3,000 B9X9L Natural 250 LB. 9.0 0.49 0.09 2.5 50 3,000 B15X0L UV Black 250 LB. 15.0 0.49 0.09 4.4 50 2,000 B15X9L Natural 250 LB. 15.0 0.49 0.09 4.4 50 2,000 B21X0L UV Black 250 LB. 21.8 0.49 0.09 6.5 50 500 B21X9L Natural 250 LB. 21.8 0.49 0.09 6.5 50 500 B34X0L UV Black 250 LB. 34.3 0.49 0.09 10.5 50 500 B34X9L Natural 250 LB. 34.3 0.49 0.09 10.5 50 500 B40X0L UV Black 250 LB. 40.0 0.49 0.09 12.5 50 500 B40X9L Natural 250 LB. 40.0 0.49 0.09 12.5 50 500

AEM Part Number

AEM Part Number

Color

Color

Tensile

Tensile

Length

Length

Width

Width

Thickness

Thickness

Bundle Diameter

Bundle Diameter

Bag Qty

Bag Qty

Case Qty

Case Qty

Case Weight (lb)

4 5

MADE in the USA

MADE in the USA

MADE in the USA


TYPE 2128DR


TYPE 2128DR


TYPE 2128DR


*B200



*B300Please call for information on all of our tension tools.






TYPE 2128DR181 B-C

B5I0C-MH* UV Black 40 LB. 6.0 0.140 0.5 1.5 #8 100 10,000 24.5 B5I9C-MH* Natural 40 LB. 6.0 0.140 0.5 1.5 #8 100 10,000 24.5 B7S0C-MH UV Black 50 LB. 8.1 0.180 0.055 2.0 #10 100 5,000 20 B7S9C-MH Natural 50 LB. 8.1 0.180 0.055 2.0 #10 100 5,000 20 B11S0C-MH UV Black 50 LB. 11.6 0.180 0.055 3.0 #10 100 5,000 21 B11S9C-MH Natural 50 LB. 11.6 0.180 0.055 3.0 #10 100 5,000 21 B14S0C-MH UV Black 50 LB. 15.1 0.180 0.055 4.0 #10 100 5,000 29 B14S9C-MH Natural 50 LB. 15.1 0.180 0.055 4.0 #10 100 5,000 29 B14L0C-MH UV Black 120 LB. 15.7 0.298 0.069 4.0 1/4 100 2,000 31 B14L9C-MH Natural 120 LB. 15.7 0.298 0.069 4.0 1/4 100 2,000 31

*Not made in U.S.A.


Bundle Diameter

ScrewSize Bag Qty Case Qty

Case Weight (lb)

MOUNTING HEAD TIES

T: 1-888-463-3454 | F: 1-877-874-0811 | www.americanelitemolding.com T: 1-888-463-3454 | F: 1-877-874-0811 | www.americanelitemolding.com 6 7

Secure and Mount cable bundles to: Walls, Ceilings, Panel Boards and Cabinets.

NEW Design Nylon 6/6 material Bundling & Mounting; one easy installation

MADE in the USA

B7S0C-R UV Black 50 LB. 7.6 0.180 0.055 2.0 100 5,000 20 B7S9C-R Natural 50 LB. 7.6 0.180 0.055 2.0 100 5,000 20 B11S0C-R UV Black 50 LB. 11.1 0.180 0.055 3.0 100 5,000 21 B11S9C-R Natural 50 LB. 11.1 0.180 0.055 3.0 100 5,000 21 B14S0C-R UV Black 50 LB. 14.6 0.180 0.055 4.0 100 5,000 29 B14S9C-R Natural 50 LB. 14.6 0.180 0.055 4.0 100 5,000 29



Case Weight (lb)

RELEASABLE TIES

Simply pull the release tab in the direction of the arrow to release, and the tie is ready to reuse.

Fast and Easy Removal Temporary or Permanent Applications

MADE in the USA


TYPE 2128DR


Bundle Diameter Bag Qty

Mount Head

Screw Size Case Qty

PUSH MOUNT TIES

without wings: B5I0C-PM UV Black 40 LB. 6.0 .15 .06 1.5 #10 100 10,000 B5I9C-PM Natural 40 LB. 6.0 .15 .06 1.5 #10 100 10,000 B7S0C-PM UV Black 50 LB. 8.0 .18 .06 1.8 1/4 100 5,000 B7S9C-PM Natural 50 LB. 8.0 .18 .06 1.8 1/4 100 5,000with wings: B7S0C-PMW UV Black 50 LB. 8.0 .19 .05 1.8 1/4 100 5,000 B7S9C-PMW Natural 50 LB. 8.0 .19 .05 1.8 1/4 100 5,000

B7SHS0M-FTPM Heat Stabilized 50 LB. 8.6 0.18 0.055 2 .245 min 1,000 5,000 UV Black .278 max



HoleDiameter(inches) Case Qty

FIR TREE PUSH MOUNT TIES

MADE in the USA

IDENTIFICATION TIES

A. Horizontal ID B4M9C-ID Natural 18 LB. 4.0 0.10 0.04 1.0 .30 x 1.0 100 B8M9C-ID Natural 18 LB. 8.0 0.10 0.04 2.0 .50 x 1.1 100B. Vertical ID B8S9C-ID Natural 50 LB. 8.0 0.18 0.06 2.0 1.1 x .50 100 B14S9C-ID Natural 50 LB. 14.0 0.18 0.06 4.0 2.0 x .50 100C. Horizontal Flag B4M9C-FL Natural 18 LB. 4.0 0.10 0.04 1.0 .30 x 1.0 100



Write-OnArea

(inches)

Horizontal ID Vertical ID Horizontal Flag

without wings with wings


B4MHS0M HS UV Black 18 LB. 4.1 0.096 0.035 0.75 1,000 25,000 17 B5IHS0M HS UV Black 30 LB. 5.7 0.142 0.050 1.25 1,000 10,000 17 B7SHS0M HS UB Black 50 LB. 7.6 0.180 0.054 2.0 1,000 10,000 30 B11SHS0M HS UV Black 50 LB. 11.1 0.180 0.054 3.0 1,000 5,000 21 B14SHS0M HS UV Black 50 LB. 14.6 0.180 0.054 4.0 1,000 5,000 26 B14LHS0C HS UV Black 120 LB. 15 0.298 0.069 4.0 100 2,000 26



Case Weight (lb)

B7SIM0C UV Black 50 LB. 7.6 0.180 100 10,000 B11SIM0C UV Black 50 LB. 11.1 0.180 100 5,000 B14SIM0C UV Black 50 LB. 14.6 0.180 100 5,000 B14LIM0C UV Black 120 LB. 15 0.298 100 2,000 B7SIM0C-MH UV Black 50 LB. 8.1 0.180 100 5,000 B14LIM0C-MH UV Black 120LB. 15.7 0.298 100 2,000

AEM Part Number Color Tensile Length Width Bag Qty Case Qty

HEAT STABILIZED TIES

IMPACT MODIFIED TIES

Up to 220F Maximum Operating Temperature

Impact ResistantHigh TemperatureUV Weather Resistant

MADE in the USA


TYPE 2128DR

B7SAW0C UV Black 50 LB. 7.6 0.180 0.054 2.0 100 10,000 30 B11SAW0C UV Black 50 LB. 11.1 0.180 0.054 3.0 100 5,000 26 B14SAW0C UV Black 50 LB. 14.6 0.180 0.054 4.0 100 5,000 26 B14LAW0C UV Black 120 LB. 15.0 0.298 0.069 4.0 100 2,000 26



Case Weight (lb)

ELITE COLD WEATHER TIES

Superior Performance in Sub-Zero Temperatures

All-Weather Applications

MADE in the USA


TYPE 2128DR

B4MMDC Teal 18 LB. 4.1 0.096 0.035 0.75 100 25,000 18 B4MMDM Teal 18 LB. 4.1 0.096 0.035 0.75 1,000 25,000 18 B8IMDC Teal 40 LB. 8.7 0.142 0.05 2.0 100 10,000 24 B8IMDM Teal 40 LB. 8.7 0.142 0.05 2.0 1,000 10,000 24 B7SMDC Teal 50 LB. 7.6 0.18 0.054 2.0 100 10,000 30 B7SMDM Teal 50 LB. 7.6 0.18 0.054 2.0 1,000 10,000 30 B11SMDC Teal 50 LB. 11.1 0.18 0.054 3.0 100 5,000 21 B11SMDM Teal 50 LB. 11.1 0.18 0.054 3.0 1,000 5,000 21 B14SMDC Teal 50 LB. 14.6 0.18 0.054 4.0 100 5,000 26 B14SMDM Teal 50 LB. 14.6 0.18 0.054 4.0 1,000 5,000 26 B14LMDC Teal 120 LB. 15.0 0.298 0.069 4.0 100 2,000 26


Bundle Diameter Case QtyBag Qty

Case Weight (lb)

METAL DETECTABLE TIES

Impregnated with metal flakes for contamination prevention

MADE in the USA

CUSTOM PRINTED TIES

Serialized and Printed Cable TiesOrder your cable ties with

custom printing for tamper proof and identification purposes.

MADE in the USA


B4M*M 18 LB. 4.1 0.096 0.035 0.75 1,000 25,000 17 B4M*C 18 LB. 4.1 0.096 0.035 0.75 100 25,000 17 B5I*M 40 LB. 5.7 0.142 0.050 1.5 1,000 10,000 17 B5I*C 40 LB. 5.7 0.142 0.050 1.5 100 10,000 17 B8I*M 40 LB. 8.7 0.142 0.050 2.0 1,000 10,000 24 B8I*C 40 LB. 8.7 0.142 0.050 2.0 100 10,000 24 B7S*M 50 LB. 7.6 0.18 0.054 2.0 1,000 10,000 30 B7S*C 50 LB. 7.6 0.18 0.054 2.0 100 10,000 30 B11S*M 50 LB. 11.1 0.18 0.054 3.0 1,000 5,000 21 B11S*C 50 LB. 11.1 0.18 0.054 3.0 100 5,000 21 B14S*M 50 LB. 14.6 0.18 0.054 4.0 1,000 5,000 26 B14S*C 50 LB. 14.6 0.18 0.054 4.0 100 5,000 26

AEM Part Number Tensile Length Width Thickness


Case Weight (lb)

COLORED TIES

COLOR

*SUFFIX 1

Brown Red Orange Yellow Green Blue Purple Gray

2 3 4 5 6 7 8

*Insert number suffix for color** Also available in fluorescent colors#11 - FL Green #12 - FL Pink#13 - FL Yellow #14 - FL Orange#15 - FL Blue

MADE in the USA


TYPE 2128DR

B4MAHC Burgundy 18 LB. 4.1 0.096 0.035 0.75 100 25,000 18 B7SAHC Burgundy 50 LB. 7.6 0.180 0.054 2.0 100 10,000 30 B11SAHC Burgundy 50 LB. 11.1 0.180 0.054 3.0 100 5,000 20 B14SAHC Burgundy 50 LB. 14.6 0.180 0.054 4.0 100 5,000 26 B14LAHC Burgundy 120 LB. 15.0 0.298 0.069 4.0 100 2,000 26

Tensile Length Width ThicknessBundle

Diameter Bag Qty Case QtyCase

Weight (lb)

AIR HANDLING PLENUM TIES

MADE in the USA

Meets UL2043 For use in Plenum Air Handling Spaces


TYPE 2128DR

AEM Part Number Color

BTSN60M Black 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN62M Red 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN63M Orange 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN64M Yellow 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN65M Green 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN66M Blue 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN67M Purple 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23 BTSN69M Natural 30 LB. 5.625 0.14 0.054 1.25 1,000 10,000 23



Case Weight (lb)

EZ OFF TIES

U.S. Patent # 7,062,820 Fast and Easy Removal

MADE in the USATo remove, pull down on arm

and tie will separate

B7S0C-DL UV Black 50 LB. 8.8 0.19 0.05 .80 100 5,000 B7S9C-DL Natural 50 LB. 8.8 0.19 0.05 .80 100 5,000 B11S0C-DL UV Black 50 LB. 11.9 0.19 0.05 1.50 100 5,000 B11S9C-DL Natural 50 LB. 11.9 0.19 0.05 1.50 100 5,000 B14S0C-DL UV Black 50 LB. 14.5 0.19 0.05 2.00 100 5,000 B14S9C-DL Natural 50 LB. 14.5 0.19 0.05 2.00 100 5,000



DOUBLE LOOP TIES

12 13


BMPMA0C UV Black 0.75 0.75 0.1875 0.165 0.162 100 5,000 19 BMPMA9C Natural 0.75 0.75 0.1875 0.165 0.162 100 5,000 19 BMPSA0C UV Black 1.0 1.0 0.198 0.22 0.210 100 5,000 19 BMPSA9C Natural 1.0 1.0 0.198 0.22 0.210 100 5,000 19

AEM Part Number Color Length Width Thickness


ScrewSize Case Qty

Case Weight (lb)

ACRYLIC BASED MOUNTING PADS

MADE in the USA

Suitable for Higher Heat Requirements


TYPE 2128DR

TYPE 11

BMPM0C UV Black 0.75 0.75 0.1875 0.165 0.162 100 5,000 19 BMPM9C Natural 0.75 0.75 0.1875 0.165 0.162 100 5,000 19 BMPS0C UV Black 1.0 1.0 0.198 0.22 0.210 100 5,000 19 BMPS9C Natural 1.0 1.0 0.198 0.22 0.210 100 5,000 19

AEM Part Number Color Length Width Thickness


ScrewSize Case Qty

Case Weight (lb)

RUBBER BASED MOUNTING PADS

MADE in the USA


TYPE 2128DR

TYPE 11

MIL-SPEC TIES

MS3367-4-* B4M*M 18 LB. 4.1 0.096 0.035 0.75 1,000 25,000 17MS3367-5-* B5I*M 40 LB. 5.7 0.142 0.050 1.25 1,000 10,000 17MS3367-1-* B7S*M 50 LB. 7.6 0.180 0.054 2.0 1,000 10,000 30MS3367-7-* B11S*M 50 LB. 11.1 0.180 0.054 3.0 1,000 5,000 21MS3367-2-* B14S*M 50 LB. 14.6 0.180 0.054 4.0 1,000 5,000 26MS3367-3-* B14L*C 120 LB. 15 0.298 0.069 4.0 100 2,000 26MS3367-8-* B24H*L 175 LB. 24 0.335 0.087 7.2 50 500 15MS3367-9-* B24H*L 175 LB. 24 0.335 0.087 7.2 50 500 15MS3367-10-* B24H*L 175 LB. 24 0.335 0.087 7.2 50 500 15MS3367-12-* B36H*L 175 LB. 36 0.335 0.087 11.0 50 500 22

AEM Part NumberMS Part Tensile Length Width Thickness


Case Weight (lb)

* Insert 9 for Natural or 0 for Black

MADE in the USA

BSS6SC 150 LB. 6.0 0.180 0.10 1.5 100 BSS8SC 150 LB. 8.0 0.180 0.10 2.0 100 BSS14SC 150 LB. 14.0 0.180 0.10 4.0 100 BSS20SC 150 LB. 20.5 0.180 0.10 6.0 100 BSS26SC 150 LB. 26.5 0.180 0.10 8.0 100



150 LB. STAINLESS STEEL TIES

BSS8HC 300 LB. 8.0 0.31 0.10 2.0 100 BSS14HC 300 LB. 14.0 0.31 0.10 4.0 100 BSS20HC 300 LB. 20.5 0.31 0.10 6.0 100 BSS26HC 300 LB. 26.5 0.31 0.10 8.0 100



300 LB. STAINLESS STEEL TIES

BWN8C Grey Screw On 1#20+1#22 2#16 100 BWN6C Blue Screw On 3#20 3#16+1#18 100 BWN3C Orange Screw On 3#20 3#16+1#18 100 BWN4C Yellow Screw On 1#14+1#18 4#14+1#18 100 BWN2C Red Screw On 2#14 2#10+2#12 100 BWWN4C Yellow Wing Twist On 2#18 3#12 100 BWWN2C Red Wing Twist On 2#14 4#10 100 BWWN8C Grey Wing Twist On 3#12 4#10 100 BWWN5C Blue Wing Twist On 3#12 1#6+2#8 100

AEM Part Number Color Type

Wire Range Minimum

Wire Range Maximum Bag Qty

WIRE CONNECTORS

14 15


BLPM9C Natural 0.75 0.375 0.1875 18-50 LBS #10 100

AEM Part Number Color Length Width Height

Cable TieUse Bag Qty

Mount Hole Size

LOW PROFILE MOUNTS

BSM69C Natural 0.625 0.375 0.250 18-50 LBS. #6 100 BSM109C Natural 0.875 0.625 0.375 18-175 LBS. #10 100 BSM149C Natural 0.875 0.625 0.375 18-175 LBS. 1/4 100

AEM Part Number Color Length Width Height

Cable TieUse Bag Qty

Mount Hole Size

SCREW MOUNTS

LIGHT & HEAVY DUTY CABLE CLAMPS

BLC125*C 1/8 0.17 0.37 Nylon 100 1,000 BLC187*C 3/16 0.17 0.37 Nylon 100 1,000 BLC250*C 1/4 0.17 0.37 Nylon 100 1,000 BLC375*C 3/8 0.17 0.37 Nylon 100 1,000 BLC500*C 1/2 0.17 0.37 Nylon 100 1,000 BHC250*C 1/4 0.2 0.5 Nylon 100 1,000 BHC375*C 3/8 0.2 0.5 Nylon 100 1,000 BHC500*C 1/2 0.2 0.5 Nylon 100 1,000 BHC750*C 3/4 0.2 0.5 Nylon 100 1,000 BHC1000*C 1 0.2 0.5 Nylon 100 1,000

AEM Part Number

Clamp Dia. (Inches)

Hole Dia.(inches)

Width(Inches) Material Bag Qty

CaseQuantity

* Insert 9 for Natural or 0 for black

MADE in the USA

FRACTIONS DECIMALS MILLIMETERS FRACTIONS DECIMALS MILLIMETERS1/64 .015625 0.397 33/64 .515625 13.0971/32 .03125 0.794 17/32 .53125 13.4943/64 .046875 1.191 35/64 .546875 13.8911/16 .0625 1.588 9/16 .5625 14.2885/64 .078125 1.984 37/64 .578125 14.6843/32 .09375 2.381 19/32 .59375 15.0817/64 .109375 2.778 39/64 .609375 15.4781/8 .1250 3.175 5/8 .6250 15.8759/64 .140625 3.572 41/64 .640625 16.2725/32 .15625 3.969 21/32 .65625 16.66911/64 .171875 4.366 43/64 .671875 17.0663/16 .1875 4.763 11/16 .6875 17.46313/64 .203125 5.159 45/64 .703125 17.8597/32 .21875 5.556 23/32 .71875 18.25615/64 .234375 5.953 47/64 .734375 18.6531/4 .2500 6.350 3/4 .7500 19.05017/64 .265625 6.747 49/64 .765625 19.4479/32 .28125 7.144 25/32 .78125 19.84419/64 .296875 7.541 51/64 .796875 20.2415/16 .3125 7.938 13/16 .8125 20.63821/64 .328125 8.334 53/64 .828125 21.03411/32 .34375 8.731 27/32 .84375 21.43123/64 .359375 9.128 55/64 .859375 21.8283/8 .3750 9.525 7/8 .8750 22.22525/64 .390625 9.922 57/64 .890625 22.62213/32 .40625 10.319 29/32 .90625 23.01927/64 .421875 10.716 59/64 .921875 23.4167/16 .4375 11.113 15/16 .9375 23.81329/64 .453125 11.509 61/64 .953125 24.20915/32 .46875 11.906 32/32 .96875 24.60631/64 .484375 12.303 63/64 .984375 25.0031/2 .5000 12.700 1 1.000 25.400

MM INCHES0.1 0.0030.2 0.0070.3 0.0110.4 0.0150.5 0.0190.6 0.0230.7 0.0270.8 0.0310.9 0.0351 0.032 0.073 0.114 0.155 0.196 0.237 0.278 0.31

MM INCHES9 0.3510 0.3911 0.4312 0.4713 0.5114 0.5515 0.5916 0.6217 0.6618 0.7019 0.7420 0.7821 0.8222 0.8623 0.9024 0.9425 0.98

MM INCHES26 1.0227 1.0628 1.1029 1.1430 1.1831 1.2232 1.2533 1.2934 1.3335 1.3736 1.4137 1.4538 1.4939 1.5340 1.5741 1.6142 1.65

MM INCHES43 1.6944 1.7345 1.7746 1.8147 1.8548 1.8849 1.9250 1.9651 2.0052 2.0453 2.0854 2.1255 2.1656 2.2057 2.2458 2.2859 2.32

MM INCHES60 2.3661 2.4062 2.4463 2.4864 2.5165 2.5566 2.5967 2.6368 2.6769 2.7170 2.7571 2.7972 2.8373 2.8774 2.9175 2.9576 2.99

MM INCHES77 3.0378 3.0779 3.1180 3.1481 3.1882 3.2283 3.2684 3.3085 3.3486 3.3887 3.4288 3.4689 3.5090 3.5491 3.5892 3.6293 3.66

MM INCHES94 3.7095 3.7496 3.7797 3.8198 3.8599 3.89100 3.9200 7.8300 11.8400 15.7500 19.6600 23.6700 27.5800 31.4900 35.41,000 39.3

METRIC CONVERSIONS

MILLIMETERS TO INCHES CONVERSION TABLE

16 17


ORDER POLICY1) Acceptable Payment Terms: Net 30 Days, Visa, MasterCard, American Express, COD, CIA and Wire Transfer.2) All Payments must be in U.S. Currency.3) There is a $100.00 order minimum and a $5.00 line minimum.4) Private label and packaging requires a $250.00 order minimum5) Please allow up to two weeks for any custom orders. This includes colors, packaging and labeling.6) All orders are F.O.B. American Elite Molding shipping locations.7) F.O.B free freight on orders in excess of $2,500.00. This is limited to the Continental U.S. and is only available

to ship from American Elite Molding shipping locations. It is limited to one release and shipping to one location.American Elite Molding reserves the right to choose freight carriers on all free freight orders.

8) There will be a $50.00 fee applied to any non-standard product documentation.9) American Elite Molding will not be responsible for any air freight due to errors. All air freight orders must be

confirmed via fax or email prior to shipment.10) American Elite Molding will not be responsible for any International Customs charges which include but are not

limited to taxes, duties, tariffs, brokerage fees, storage fees, and freight charges. Unless otherwise specified, UPS brokerage service will be used on all UPS Shipments.

11) ALL PRICES AND POLICIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.12) Invoice Late Fees & Interest Charge

A. Payments not received by due dates are subject to a 1.5% late fee per month.B. Interest accrues from the invoice due date.C. AEM reserves the right to put a hold on any account past due.D. All accounts will automatically be placed on hold if over 60 days from invoice date.E. Checks returned unpaid are subject to the maximum fees allowed.

RETURN POLICY1) No returns will be accepted unless accompanied with a written Return Material

Authorization (RMA) from the manufacturing facility.2) All requests for returns must be made within 60 Days of the purchase date.3) All returns are subject to a 15-35% restocking fee.4) All returns must be in original package and sealed bags to be considered for credit.5) No returns accepted on the following:

a) Special package productsb) Private labeled productsc) Custom colorsd) Hot stamp orders

AEM PART # ACT PART # CATAMOUNT PART # GB PART # PANDUIT PART # T & B PART # TYTON PART #

B4M9M AL-04-18-9-M L-04-18-9-MN 46-104M PLT1M-M TY23M T18R9M4B4M9C AL-04-18-9-C L-04-18-9-C 46-104 PLT1M-C TY523M T18R9C2B4M0M AL-04-18-0-M L-04-18-0-MN 46-104UVBM PLT1M-M0 TY23MX T18R0M4 B4M0C AL-04-18-0-C L-04-18-0-C 46-104UVB PLT1M-C0 TY523MX T18ROC2 B6M9M AL-06-18-9-M L-06-18-9-M 46-105M PLT1.5M-M TYB2315M T18I9M4B6M9C AL-06-18-9-C L-06-18-9-C 46-105 PLT1.5M-C TY52315M T18I9C2B6M0M AL-06-18-0-M L-06-18-0-M 46-105UVBM PLT1.5M-M0 TYB2315MX T18I0M4B6M0C AL-06-18-0-C L-06-18-0-C 46-105UVB PLT1.5M-C0 TY52315MX T18I0M4B8M9M AL-08-18-9-M L-08-18-9-M 46-108M PLT2M-M TY232M T18L9M4B8M9C AL-08-18-9-C L-08-18-9-C 46-108 PLT2M-C TY5232M T18L9C2B8M0M AL-08-18-0-M L-08-18-0-M 46-108UVBM PLT2M-M0 TY232MX T18L0M4B8M0C AL-08-18-0-C L-08-18-0-C 46-108UVB PLT2M-C0 TY5232MX T18L0C2B5I9M AL-05-40-9-M L-5-30-9-M 46-206M PLT1.5I-M TY24M T30R9M4B5I9C AL-05-40-9-C L-5-30-9-C 46-206 PLT1.5I-C TY524M T30R9C2B5I0M AL-05-40-0-M L-5-30-0-M 46-206UVBM PLT1.5I-M0 TY24MX T30R0M4B5I0C AL-05-40-0-C L-5-30-0-C 46-206UVB PLT1.5I-C0 TY524MX T30R0C2B8I9M AL-08-40-9-M L-08-40-9-M 46-208M PLT2I-M TY242M T40R9M4B8I9C AL-08-40-9-C L-08-40-9-C 46-208 PLT2I-C TY5242M T40R9C2B8I0M AL-08-40-0-M L-08-40-0-M 46-208UVBM PLT2I-M0 TY242MX T40R0M4B8I0C AL-08-40-0-C L-08-40-0-C 46208UVB PLT2I-C0 TY5242MX T40R0C2N/A AL-11-40-9-M L-11-40-9-D 46-210M PLT3I-M TY26M T40I9M4N/A AL-11-40-9-C L-11-40-9-C 46-210 PLT3I-C TY526M T40I9C2N/A AL-11-40-0-M L-11-40-0-D 46-210UVBM PLT3I-M0 TY26MX T40I0M4N/A AL-11-40-0-C L-11-40-0-C 46-210UVB PLT3I-C0 TY526MX T40I0C2N/A AL-14-40-9-M L-14-40-9-D 46-215M PLT4I-M TY244M T40L9M4N/A AL-14-40-9-C L-14-40-9-C 46-215 PLT4I-C TY5244M T40L9C2N/A AL-14-40-0-M L-14-40-0-D 46-215UVBM PLT4I-M0 TY244MX T40L0M4N/A AL-14-40-0-C L-14-40-0-C 46-215UVB PLT4I-C0 TY5244MX T40L0C2B7S9M AL-07-50-9-M L-07-50-9-M 46-308MN PLT2S-M TY25M T50R9M4B7S9C AL-07-50-9-C L-07-50-9-C 46-308 PLT2S-C TY525M T50R9C2B7S0M AL-07-50-0-M L-07-50-0-M 46-308UVBM PLT2S-M0 TY25MX T50R0M4B7S0C AL-07-50-0-C L-07-50-0-C 46-308UVB PLT2S-C0 TY525MX T50R0C2B11S9M AL-11-50-9-D L-11-50-9-D 46-310M PLT3S-M TY253M T50I9M4 (1,000)B11S9C AL-11-50-9-C L-11-50-9-C 46-310 PLT3S-C TY5253M T50I9C2B11S0M AL-11-50-0-D L-11-50-0-D 46310UVBM PLT3S-M0 TY253MX T50I0M4 (1,000)B11S0C AL-11-50-0-C L-11-50-0-C 46-310UVB PLT3S-C0 TY5253MX T50I0C2B14S9M AL-14-50-9-D L-14-50-9-D 46-315M PLT4S-M TY28M T50L9M4 (1,000)B14S9C AL-14-50-9-C L-14-50-9-C 46-315 PLT4S-C TY528M T50L9C2B14S0M AL-14-50-0-D L-14-50-0-D 46-315UVBM PLT4S-M0 TY28MX T50L0M4 (1,000)B14S0C AL-14-50-0-C L-14-50-0-C 46-315UVB PLT4S-C TY528MX T50L0C2B17S9C AL-17-50-9-C N/A N/A PLT5S-C N/A N/AB17S0C AL-17-50-0-C N/A N/A PLT5S-C0 N/A N/AB8L9C AL-08-120-9-C L-08-120-9-C 46-408 PLT2H-L TY5272M T120S9H4 (500)B8L0C AL-08-129-0-C L-08-120-0-C 46-408UVB PLT2H-L0 TY5272MX T120S0H4 (500)B14L9C AL-14-120-9-C L-14-120-9-C 46-415 PLT4H-C TY527M T120R9K2 (50)B14L0C AL-14-120-0-C L-14-120-0-C 46-415UVB PLT4H-C0 TY527MX T120R0K2 (50)B24H9L AL-24-175-9-L L-24-175-9-L 46-424 PLT6H-C TY5277M (120) T150M9X2 (25)B24H0L AL-24-175-0-L L-24-175-0-L 46-424UVB PLT6H-C0 TY5277MX (120) T150M0X2 (25)B3649L AL-36-175-9-L L-36-175-9-L 46-436 N/A TY53510M (35) T150LL9X2 (25)B36H0L AL-36-175-0-L L-36-175-0-L 46-436UVB N/A TY53510MX (35) T150LL0X2 (25)B48H9L AL-48-175-9-L N/A 46-448 PLT13H-C TY54513M (45) T150XLL9X2 (25)N/A AL-48-175-8-L L-48-175-8-L N/A N/A N/A N/AB48H0L AL-48-175-0-L L-48-175-0-L 46-448UVB PLT13H-C0 TY54513MX (45) T150XLL0X2 (25)


B5I9C-MH AL-05-30-MH-9-C L-5-30MH-9-C N/A PLC1.5I-S8-C TY534M T30MR9C2B5IOC-MH AL-05-30-MH-0-C L-5-30MH-0-C N/A PLC1.5I-S8-C0 TY534MX T30MR0C2B7S9M-MH AL-07-50-MH-9-M L-7-50MH-9-M 48-308M PLC2S-S10-M TY35M T50MR9M4B7S9C-MH AL-07-50-MH-9-C L-7-50MH-9-C 48-308 PLC2S-S10-C TY535M T50MR9C2B7SOM-MH AL-07-50-MH-0-M L-7-50MH-0-M 48-308UVBM PLC2S-S10-M0 TY35MX T50MR0M4B7SOC-MH AL-07-50-MH-0-C L-7-50MH-0-C 48-308UVB PLC2S-S10-C0 TY535MX T50MR0C2B11S9C-MH AL-11-50-MH-9-C L-11-50MH-9-C 48-310 PLC3S-S20-C N/A N/AB11S0C-MH AL-11-50-MH-0-C L-11-50MH-0-C 48-310UVB PLC3S-S10-C0 N/A N/AB14S9C-MH AL-14-50-MH-9-C L-14-50MH-9-C 48-315 PLC4S-S10-C TY5354M T50ML9C2B14S0C-MH AL-14-50-MH-0-C L-14-50MH-0-C 48-315UVB PLC4S-S10-C0 TY5354MX T50ML0C2B14L9C-MH AL-14-120-MH-9-C L-14-120MH-9-C 48-415 PLC4H-S25-L TY537M T120MR9H4 (500)B14L0C-MH AL-14-120-MH-0-C L-14-120MH-0-C 48-415UVB PLC4H-S25-L0 TY537MX T120MR0H4 (500)B7S9C-R AL-08-50-RL-9-C L-8-50R-9-C 47-108 PRT-2S-M N/A N/A B7S0C-R AL-08-50-RL-0-C L-8-50R-0-C 47-1080UVB PRT-2S-M0 N/A N/A


BMPM9C AL-MP-750-9-C MPNY-750-9-C MB-10 N/A TC344A MB3A10C2BMPM0C AL-MP-750-0-C MPNY-750-0-C MB-10UVB N/A TC344AX MB3A0C2BMPS9C AL-MP-1,000-9-C MPNY-1,000-9-C MB-20 ABM100-A-D TC345A MB4A10C2BMPS0C AL-MP-1,000-0-C MPNY-1,000-0-C MB-20UVB N/A TC345AX MB4A0C2BMPMA9C AL-MPA-750-9-C MPNY-750A-9-C N/A N/A N/A MB3A10A2C2BMPMA0C AL-MPA-750-0-C MPNY-750A-0-C N/A N/A N/A N/ABMPSA9C AL-MPA-1,000-9-C MPNY-1,000A-9-C N/A ABM100-AT-D N/A MB4A10A2C2BMPSA0C AL-MPA-1,000-0-C MPNY-1,000A-0-C N/A ABM100-AT-D0 N/A N/A

CABLE TIE CROSS REFERENCE SPECIALTY CABLE TIE CROSS REFERENCE

CABLE TIE ACCESSORIES CROSS REFERENCE

18 19

T: 1-888-463-3454 | F: 1-877-874-0811 | www.americanelitemolding.com *Bulk pkg. varies by manufacturer. Call for details.

p: 1-888-463-3454

f: 1-877-874-0811

5680 John Givens Rd.

Crestview, Florida 32539

www.americanelitemolding.com

[email protected]

Documents

CABLE TIE DIVISION MADE IN THE USA - American Elite … 2016 Catalog.pdf · CABLE TIE DIVISION. Understanding the AEM Part Number System ... 6.1” 0.096” 0.045” 1.2” 100 20,000