CABINE T & CAFETERIA ACCESSORIE S - Kason IndustriesCABINE T & CAFETERIA ACCESSORIE S ... • Cabinets and Cafeteria Equipment • Truck Bodies • Panelock™ Panel Fasteners •

PAGE J1 CABINET & CAFETERIA | 800.935.2766 | www.kasonind.com

0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

Where Precision Design Meets Specialty Manufacturing

CABINET & CAFETERIA ACCESSORIES

1-1/4”32mm

2-37/64”65.5mm

3/4”19mm

A

BC

D

.25”6mm

A

B

C

A

C D

B

7/8”(22mm)

D

22-15/16”(583mm)19-15/16”(506mm)

1-1/2”(38mm)

A B C

6-7/8”(175mm)

O. A.

O. D.

2-5/6”68mm

© 2020 Kason Industries, Inc. | 57 Amlajack Blvd., Newnan, GA 30265 | www.kasonind.com

PAGE J2CABINET & CAFETERIA | 800.935.2766 | www.kasonind.com

0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

THE KASON MISSION:

TO PROTECT YOUR PRODUCT INTEGRITYOur customers go to great lengths to build top-of-the-line coolers, freezers, foodservice equipment, industrial enclosures and delivery vans. Our goal is to preserve your product integrity by providing the highest quality door hardware and accessories for both original equip-ment and replacement applications.

End users need to protect products and processes, and lower operat-ing costs. Their first line of defense is stable, airtight enclosures with doors that open with ease and close securely.

Since 1926, Kason has promised and delivered just that. Kason’s extensive lines of walk-in and reach-in door hardware satisfy the most demanding requirements. Demonstrate the value of your products with the most innovative, dependable and longlasting hardware in the business.

RESEARCH AND TESTINGEvery Kason product must fulfill our customers’ requirements. Before we develop a new product, we research the needs of both our industry and end users. We are never satisfied with the status quo. Our dedi-cated research and development staff continually search for pioneer-ing design concepts. They insist on engineering integrity, extensive product testing and precise, in-line quality control. That is how we have developed such successful and trustworthy products as SafeGuard® inside releasing safety latches, Pacesetter handles and hinges, stain-less steel hinges and latches and truck door handles with removable cylinder locks.

CREATIVE CONCEPTSLeading equipment manufacturers turn to Kason when they want a unique look of their own. We will adapt a stock product, design custom hardware or partner with your design engineers to develop a signature appearance just for your products. Building special and customized hardware is routine at Kason.

QUALITYKason production facilities boast state-of-the-art installations, featuring fully automated die-casting, polishing and electroplating, as well as a full range of electronically controlled and robotic machinery. We require the finest raw materials, accurate machine tolerances and the highest level of finishing. Skilled, experienced people maintain the Ka-son tradition of production excellence. Our unremitting commitment to superior manufacturing assures you consistently high quality products at the lowest possible cost. Quality assurance is integrated into every step of Kason operations – from engineering research and development through packaging and shipping.

SERVICEThe lifeline to all your foodservice needs is our efficient and friendly Customer Service Department. A representative can quickly track product availability or the status of your order with our computerized inventory and order control system. Count on dependable global de-livery as we serve you from Kason distribution centers in the continental United States and Canada as well as through authorized distributors throughout the world.

OUR PROMISE Satisfying your needs is our top priority. That is why Kason supplies you with hardware and accessories that reflect the same quality you de-mand in your own products. We strive to demonstrate an attitude that makes you want to do business with us. At Kason we offer a tradition of excellence, a philosophy of innovation and the most trusted name in specialty commercial hardware.

KASON CONTACTS

USA SALES & DISTRIBUTION CENTERS

1.800.93KASON (800.935.2766)

KASON INDUSTRIES, INC. GLOBAL HEADQUARTERS57 Amlajack Boulevard | Newnan, GA 30265-1015, USA 800.935.3550 | FAX: 770.251.4854 [email protected]

KASON FOODSERVICE DIVISION31 Amlajack Boulevard | Newnan, GA 30265-1015, USA 866.231.2157 | FAX: 770.252.8397 [email protected]

KASON INTERNATIONAL DIVISION 57 Amlajack Boulevard | Newnan, GA 30265-1015, USA 770.304.3000 | FAX: 770.251.4854 [email protected] KASON VINYL DIVISION31 Amlajack Boulevard | Newnan, GA 30265-1015, USA678.423.0722 | FAX: 770.252.8397 [email protected]

KASON CANADA BRANCH226 Industrial Pkwy North, Unit 2Aurora, Ontario, L4G 4C3, Canada905.713.6515 | FAX: [email protected]

KASON CENTRAL BRANCH8889 Whitney Drive | Lewis Center, OH 43035-7106, USA 740.549.2100 | FAX: 740.549.0701 [email protected]

KASON MID-AMERICA BRANCH1239 Atlantic Avenue | Kansas City, MO 64116-4141, USA 816.472.7450 | FAX: 816.472.8580 [email protected]

KASON WESTERN BRANCH1500 East Wooley Road, Suite EOxnard, CA 93030-7385, USA805.247.1088 | FAX: 805.247.1164 [email protected]


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

KASON CABINET & CAFETERIA PRODUCTS

CONTENTS

NUMERICAL INDEX ...............................................4

BALL BEARING SYSTEMS .............................J24 - 25BUMPERS, RUBBER ............................................J19CASH DRAWER ................................................. J28CATCHES

CABINET DOOR................................................................J15MAGNETIC.........................................................................J14ROLLER GRIP.......................................................................J15TIGHT-ACTION..................................................................J11

CONVEYOR ROLLERS ........................................ J37DIPPERWELL ..................................................... J33DRAWER ASSEMBLIES ................................J26, J28DRAWER PANS ................................................. J27DRAWER SLIDES

X-HEAVY DUTY...................................................................J20STAINLESS STEEL................................................................J212-RAIL...................................................................................J22ROLLERS..............................................................................J23DROP HANDLE...................................................................J11

DRIP PLATES ..................................................... J35ELECTRICAL ACCESSORIES ...........................J40 - 41ESCUTCHEON PLATES ........................................ J38FEMALE STUD .....................................................J10GLASS FILLER .................................................... J35GROMMETS, RUBBER .........................................J19HANDLES, EQUIPMENT

DECORATOR..........................................................................J8KNOBS ................................................................................J10PULL .................................................................................. J5 - 6RECESSED .............................................................................. J9STAINLESS STEEL ........................................................... J5 - 8

HASP & STAPLE ..................................................J11HINGES

CABINET DOOR ......................................................... J16 - 17PIVOT .................................................................................... J11

HOOD FABRICATION ACCESSORIES ............ J30, 42LID COVER BRACKETS & POT RACK ACCESSORIES .....J32LOCKS, DRAWER & DOOR ..........................J12 - J13SCRAP BLOCKS ................................................. J33SCRAP CHUTES ................................................. J34SHELF AND TRAY SLIDE BRACKETS .................... J29SINK INSERTS ................................................... J36SLIDING DOOR HARDWARE ..............................J18SWING DOORS & STRIP CURTAINS ................... J42THUMBSCREWS ........................................... J5, J10TUBING ACCESSORIES .......................................J31U-BENDS AND ELBOWS .................................... J30

KASON PRODUCT LINES

HARDWARE & ACCESSORIES FOR

• Walk-In Coolers, Freezers and Test Chambers• Reach-In Coolers, Freezers and Refrigerators• Ovens and Heated Holding Cabinets• Food Prep and Serving Equipment • Cabinets and Cafeteria Equipment• Truck Bodies• Panelock™ Panel Fasteners• Doorware® Sliding Door Operating Systems• Electrical Devices and Lighting Fixtures• Thermaflex® Vinyl Strip Curtains and Swing Doors• Casters and Caster Legs


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

ITEM PAGE

0080 SERIES J350260 SERIES J210450 SERIES J350520 SERIES J200521 SERIES J220535 SERIES J1510100SL0004277 J1310382000004 J610573000004 J610574000004 J510578000004 J615001SP0004 J61700 SERIES J3133ELE0000102C J4033ELE0000102R J403EAW0002882G J403EAW0002991 J403EAW0002993 J403EAW0002994 J403EEA00000S8 J403EEAI000277 J403EEAI000277C J40 3EEAI000294 J403EEAI000294C J403EEAB000277 J403EEAB000294 J403EEABL00827 J403EEABL00877 J403ELE0000100 J403ELE0000101 J403ELE0000103 J4060099000008 J29 60105000001 J2960109000004 J2960310000002 J2960310000005 J2960310000004 J2960310000003 J2960310000006 J2960310000007 J30 60571000300 J560571000350 J560571000400 J560572000004 J560576000004 J567106000100 J3867106000101 J3861701000016 J3861701000017 J3861701000018 J3867300000002 J3267305000076 J1167311000004 J11

ITEM PAGE

67311000006 J1167312000004 J1167312000006 J11 67313000004 J1167313000005 J11 67317000101 J4067502000801 J5, J1067502000901 J1067503000301 J3067503000303 J3067504000101 J3367504000102 J3367504000202 J3367504000204 J3367504KL0205 J3367505000101 J3567505000102 J357100 SERIES J327102 SERIES J26 - 277104 SERIES J367107 SERIES J317109 SERIES J417110 SERIES J417301 SERIES J177303 SERIES J167304 SERIES J177306 SERIES J167307 SERIES J167308 SERIES J87309 SERIES J107310 SERIES J97314 SERIES J147315 SERIES J157318 SERIES J187319 SERIES J23 - 257321 SERIES J77324 SERIES J377500 SERIES J397501 SERIES J197503 SERIES J317504 SERIES J347600 SERIES J12 - 137602 SERIES J28905 SERIES J9915 SERIES J8916 SERIES J7THERMAL FLEX® VINYL SWING DOORS J42EASIMOUNT® STRIP CURTAINS J42

KASON CABINET & CAFETERIA PRODUCTS


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

EQUIPMENT HANDLES

19/32”15mm

4”102mm4-3/4”

121mm

5/8”16mm

4”102mm4-1/4”

108mm

0.47”12mm

3/8”10mm

0.34”9mm DIA.

#10-24

571 WIRE PULL HANDLE

Size

#8 - 32

574 576

571

Model No. Item

10574000004 Die-cast Pull Handle

60571000300 Stainless Steel 3” Wire Pull

60571000350 Stainless Steel 3-1/2" Wire Pull

60571000400 Stainless Steel 4” Wire Pull

6057000004 Stainless Steel Pull Handle

67502000801 Stainless Steel Thumbscrew

571

574

576

7502 STAINLESS STEEL THUMB-SCREWS

• Ideal for drawers & cabinets

DESCRIPTIONBrass, satin chrome finish

MOUNTING HOLESTapped for No.8-32 screws

PACKAGINGSupplied with 1” (25.4) and 1-1/2” (38.1) long screws to accommodate multiple door thickness.

574 DIE-CAST HANDLEDESCRIPTIONHigh Pressure die-cast zinc with polished chrome finish

MOUNTING HOLESTapped for No. 10-24 screws or thumbscrews

PACKAGING50 per carton

WEIGHT7 lb. (3.2 kg)

576 STAINLESS STEEL HANDLEDESCRIPTION1/4” (6.0 mm stainless steel with satin finish

MOUNTING HOLESTapped for No. 8 screws



DESCRIPTIONNo. 10-24 x 3/8” (9.5 mm), stainless steel, to meet NSF requirements for mounting handles or pulls without tools




0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.EQUIPMENT HANDLES

382 CLASSIC PULL

Model No. Item

10382000004 Classic Pull Handle

15001SP0004 HD Pull Handle

10573000004 Offset Pull Handle

10578000004 Large Offset Pull Handle

DESCRIPTIONHigh Pressure die-cast zinc with polished chrome finish

MOUNTING HOLES4 1/2” (114.3 mm) O.C. Drilled and countersunk for No. 8 (4.0 mm) screws



5001 HEAVY DUTY PULLDESCRIPTIONHigh Pressure die-cast zinc with polished chrome finish

MOUNTING HOLESDrilled and counter-sunk for 1/4” (6.0 mm) screws



573 OFFSET PULLDESCRIPTIONHigh Pressure die-cast zinc with polished chrome finish

MOUNTING HOLES5” (127mm) O.C., Drilled and tapped for 1/4”- 20 screws



578 OFFSET PULLDESCRIPTIONHigh Pressure die-cast zinc with polished chrome finish

MOUNTING HOLES9-3/4” (247.7 mm) O.C., Drilled and tapped for 5/16”- 18 screws



382

5001

573

578

382

5001

573

2-1/8”54mm

9-3/4”248mm10-7/8”276mm

578


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

STAINLESS STEEL EQUIPMENT HANDLES

7321 SERIES STAINLESS STEEL HANDLES• Heavy duty, stainless steel tubing• Insulating standoffs are heat-resistant to 400°F (204.4°C)• Through-mounting assures maximum strength• Three standard sizes; custom lengths available from

6-in minimum• Easy-grip, streamlined design

916 SERIES STAINLESS STEEL HANDLES• Heavy duty tubing and brackets are #304 stainless steel

with #4 satin finish• Tubing size is 16 GA x 1” (25mm) diameter• 5/16" (8mm) holes provided for mounting• Available in two standard sizes. Custom lengths to order

7321 HANDLE ENDS• For 1” (25mm) O.D. tubing• Each support is tapped to receive (2) 1/4-20 screw• Die-cast aluminum

2-1/4”57mm1-3/4”

45mm

2-1/2”64mm

1-1/2”38mm

1“25mm

13/16”21mm

3/8”9.5mm

O. A.

O. C.

Model No. Length

60916002087 20-7/8" (530mm) O.A. 20-1/8" (511mm) O.C.

60916002656 26-9/16" (675mm) O.A. 25-13/16" (656mm) O.C. Model No. Length

673210000041637 17-7/8" (454mm) O.A. 16-3/8" (416mm) O.C.

673210000041887 20-3/8" (518mm) O.A. 18-7/8" (480mm) O.C.

673210000042637 27-7/8" (708mm) O.A. 26-3/8" (670mm) O.C.

Model No. Length

67321000074 Handle Ends

MATERIAL7/8” (22.2mm) stainless steel tubing; glass reinforced, polyester resin insulators

MOUNTING1/4-20 threaded screw holes

FINISHNo. 4 satin

SPECIFICATIONS

7321 HANDLE ENDS


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.STAINLESS STEEL & DECORATOR EQUIPMENT HANDLES

915 SERIES DECORATOR HANDLES• Heat resistant, heavy duty construction • Black vinyl insert conceals screw holes• Styling complements Kason hinges• Front-mount and dual-mount models

Model No. Description Length

60915000054 Front Mount 12-7/8" (327mm) O.A. 10-5/8" (270mm) O.C.

60915000055 Dual Mount 12-7/8" (327mm) O.A. 10-5/8" (270mm) O.C.

60915000006 Front Mount Steel Screws

7-13/16" (198mm) O.A. 6" (127mm) O.C.

60915000011 Front Mount 12-7/8" (327mm) O.A. 10-1/2" (267mm) O.C.

60915000022 Front Mount Three Mounting Holes

23-3/8" (594mm) O.A. (2) 10-1/2" (267mm) O.C.

7308 SERIES STAINLESS STEEL TUBULAR HANDLES• Heavy duty• Available with or without heat-resistant glass reinforced

polyester resin insulators• Three standard sizes. Custom lengths available

O. A.

O. D.

2-5/6”68mm


67308000001 Stand-off Insulator N/A

67308000003 Handle Only 11-5/8" (295mm) O.A. 10-3/4" (273mm) O.C.

67308000004 Handle w/Insulators 11-5/8" (295mm) O. A. 10-3/4" (273mm) O.C.

67308000005 Handle Only 12-7/8" (372mm) O.A. 12" (305mm) O.C.

67308000006 Handle w/Insulators 12-7/8" (372mm) O.A. 12" (305mm) O.C.

67308000007 Handle Only 18-7/8" (479mm) O.A. 18" (457mm) O.C.

67308000008 Handle w/Insulators 18-7/8" (479mm) O.A. 18" (457mm) O.C.

MATERIALAluminum handle with heat-resistant nylon bases and flexible vinyl insert. Dual-mount model has threaded bushings for rear mounting

MOUNTINGAccepts No. 10-32 x 1-3/4” flat head screws and No. 10-32 hex jam nut

SPECIFICATIONS

MATERIAL7/8” (22.2mm), #304 stainless steel tubing

MOUNTING1/4-20 threaded screw holes

FINISHNo. 4 satin

SPECIFICATIONS


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7310 SERIES RECESSED HANDLES• Stainless steel construction• Easy mounting

905 SERIES RECESSED PLASTIC HANDLES• Easy-grip handle mounts with door panel• Fully recessed pull won’t catach or snag

C

D

.25”6mm

A

B

C

A

B

Ref. Model No. Description Mounting

A 67310000004 Beveled Edge Thru Studs, Lock Nuts Provided

B 67310000006 Flush For Welding

C 67310000010 Round Full Grip Thru Studs Thru Studs, Lock Nuts Provided

D 67310000018 Full Grip, Beveled Edge Thru Studs, Lock Nuts Provided

NOT SHOWN 67310000011 Round Full Grip, No Studs For Welding

Model No. Nominal Length Dim. A Dim. B Dim. C Panel Thick-

ness Cutout

60905000004 7" 7.45" (189mm) 6.95" (177mm) 1.7" (44mm) .030" to .045” 7.235 (183.8mm) x 1.530 (38.9mm)

60905000052 5" 5.44" (138mm) 5.01" (127mm) 1.4" (36mm) .055" to .070" 5.20 (132.1mm) x 1.210 (30.7mm)

60905000031 3" 3.61" (92mm)” 3.26" (83mm) 1.4” (36mm) .040" to .055" 3.45 (87.6mm) x 1.210 (30.7mm)

Ask about other sizes.

RECESSED EQUIPMENT HANDLES

MATERIALBlack ABS plastic

PANEL THICKNESSFor noimal 22 gauge

SPECIFICATIONS


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

A B

1- 3/32”28mmDIA

11/16”18mmDIA

1-3/32”28mm

C

25/32”20mm

9/16”14mmDIA.

1-15/32”38mmDIA.

D

7502 FEMALE STUD• No 10-24 x 5/8" (16mm) long• Converts male stud to female

Model No. Description

67502000901 Converts Male to Female

7309 SERIES PULL KNOBS• Solid brass/chrome plated• Tapped for No. 8-32 screws

Ref. Model No. Diameter

A 67309000004 5/8" (16mm)

B 67309000006 7/8" (22mm)

C 67309000008 1-3/32" (28mm)

D 67309000010 1-1/2" (38mm)


67502000801 Stainless Steel

EQUIPMENT HANDLES AND ACCESSORIES

7502 STAINLESS STEEL THUMBSCREWS

0.47”12mm

3/8”10mm

0.34”9mm DIA.

#10-24

A B

C D

DESCRIPTIONNo. 10-24 x 3/8” (9.5 mm), stainless steel, to meet NSF requirements for mounting handles or pulls without tools




0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

STAINLESS STEEL CABINET HARDWARE

7311 HASP & STAPLEFor sizes, see Ordering Information, below.

A

7312 SERIES TIGHT-ACTION CATCHESFor sizes, see Ordering Information, below.

B

7313 DROP HANDLE

C

Ref. Model No. Item

A67311000004 Hasp, 2-1/2" x 1" (64 x 25mm)

67311000006 Hasp, 3-1/2" x 1-1/2" (89 x 38mm)

B67312000004 Catch, 2-1/4" x 1" (57 x 25mm)

67312000006 Catch 3-15/16" x 1-1/4" (100 x 32mm)

C67313000004 Straight Back Drop Handle Sst

67313000005 Drop Handle Sst

AB

C

7305 STAINLESS STEEL PIVOT HINGE




0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.DRAWER AND DOOR LOCKS

• Drawer lock with five disc cylinder is easy to install• Two brass keys included• Non-ferrous satin chrome barrel and case• Drilled for No. 6 (4mm) wood screws.

A

D

• T-bolt lock with five-disc cylinder for hollow metal drawers and foamed-in-place doors

• Heavy duty vertical dead bolt removes for installation. Two brass keys included

• Stainless steel faced cylinder• Mounts through double-D hole; fastens with hex nut.

• Nickel plated plunger lock with five-disc cylinder• For bypassing doors 3/4" (19mm) thick or greater• Easy to install push-in bolt receiver• Locking cylinder cannot be removed from housing without

key. Two brass keys included.• Drilled for No. 5 (3mm) wood screws

B

A B

C

7600 SERIESSPECIALTY LOCKS

Ref. Model No. Item

A 67600000100 Drawer Lock

B 67600000400 Plunger Lock

C 67600000300 Sliding Door Lock, Adjustable

D 67600000200 T-Bolt Lock

• Tamper proof, adjustable sliding door lock with polished chrome finish. Two brass keys included

• Use for glass doors up to 11/16" and wood, wood framed or metal doors up to 1" (25mm) thick

• To mount, tighten ratchet bar in position with thumbscrew.

C


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7600 SERIES UTILITY LOCKS• Die-cast zinc with highly polished chrome finish. • Disc cylinder. Key is removable in locked or unlocked

position. Two brass keys included.• Four barrel lengths for materials from 5/8" (16mm) to

1-3/8" (35mm) thick. • Mounts through double-D hole; fastens with hex nut.

100SL SECURITY LOCK• 4-disc cylinder for extra security• Durable, highly polished chrome finish• Easy to install at factory or in field• Vertical and horizontal adjustments• Compatible with glass and most other doors• Black plastic caps included• Improved to be more forgiving of misalignment

A

Model No. Description Strike Height

10100SL0004277 Security Lock 25/32" (20mm)

Ref. Model No. Dim. A

A 67600000500 5/8" (16mm)

B 67600000501 7/8" (22mm)

C 67600000502 1-1/8" (27mm)

D 67600000503 1-3/8" (35mm)

Available keyed differently; please specify.

B C D

DRAWER AND DOOR LOCKS

DESCRIPTIONHighly polished chrome plated Zamak body with stainless steel faced cylinder

MOUNTINGDrilled and countersunk for No. 8 (4.0 mm) screws. Two finishing plugs provided


WEIGHT41 lb. (18kg)


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.7314 SERIES MAGNETIC CATCHES

A

B

Ref. Model No. Description Material Mounting

A

67314000101 Single Ceramic 25 lb. (11 kg) Pull

Zinc Plated Steel Pole Plate 1/4" (6mm) Holes67314000102 Double Ceramic 40 lb. (18 kg) Pull

67314000103 Single w/ Strike Plate 25 lb. (11kg) Pull

B67314000201 Single Magnet 8 lb. (4kg) Pull Aluminum Housing, Zinc Plated

Steel Pole Plate & Strike #6 Screws67314000202 Double Magnet 16 lb. (7kg) Pull

C 67314000301 Snap-in Single Magnet, Cylindrical 7 lb. (3kg) Pull Black Polypropylene Snaps into 7/8” (22mm) Diameter

Opening

D

67314000302 Snap-in, Single Magnet 7 lb. (3kg) Pull Black Polypropylene Snaps into .38" x 2-1/4" (10 x 57mm)Rectangular Opening

67314001302 Single w/ Extended Pole Plate, 7 lb. (3kg) Pull Black Polypropylene Snaps into .38" x 2-1/4" (10 x 57mm) Rectangular Opening67314001312 Single w/ Extended Pole Plate, 7 lb. (3kg) Pull White Polypropylene

E 67314000303 Snap-in, Double Magnet 14 lb. (6kg) Pull Black Polypropylene Snaps into .75" x 2-1/4” (19 x 57mm) Rectangular Opening

F 67314000401 Heavy Duty Double Magnet 7-10 lb. (13.6kg) Pull

Aluminum Housing, Zinc Plated Steel Pole Plate & Strike #6 Screws

C

D

E

F


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

DRAWER AND DOOR CATCHES

DB

Ref. Model No. Description Material Mounting

A 67315000101 Friction w/ Spring Action Rollers Steel, Zinc Plated Surface

B 67315000202 HD Snap Action, Adjustable Tension, 8 lb. (36N) Pull Steel, Nickel Plated Surface

C 67315000301 Adjustable Spring Loaded Ball Tension Brass, Nickel Plated, SS Balls Surface

D 67315000302 HD, 4-way Adjustable Spring Loaded Ball Tension Brass, Nickel Plated, SS Balls Mortise or Surface Mount

CA

7315 SERIES CABINET DOOR CATCHES

A CB D

535 SERIES ROLLER GRIP• Kason Original – the standard for concealed latching on doors and drawers• Tapered strike assures complete closure• Strike adjusts up/down or side to side• Use on doors and drawers

Model No. Description Separating Force

10535H00004 Roller Grip w/ Heavy Spring 26 to 36 lb. (116 to 160 N)

10535M00004 Roller Grip w/ Medium Spring 19 to 25 lb. (85 to 111 N)

10535L00004 Roller Grip w/ Light Spring 12 to 18 lb. (53 to 80 N)

DESCRIPTIONHigh pressure die-cast zinc tongue housing and strike; nylon rollers

FINISHPolished chrome

MOUNTINGTongue housing drilled and countersunk for No. 10 (5.0 mm) screws. Strike has slotted screw holes

PACKAGING24 per carton complete with strikes

WEIGHTApprox. 17-1/2 lb (7.9 kg) per carton


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7303 SERIES BUTT HINGES• Stainless steel• .075" (2mm) thick• .187" (5mm) pin diameter

7307 SERIES LIFT-OFF FLAG HINGES• Stainless steel hinge; stainless steel and nylon bearing• .075" (2mm) thick• Right or left- hand application• Swedged knuckle• No mortising of door or jamb• Minimum door clearance needed

7306 SERIES LIFT-OFF HINGES• Stainless steel• .075" (2mm) thick

WIDTH

LENGTH

Model No. Description Width Length

67306L00003 Left Opening 1-1/4" (31.75mm) 2" (51mm)

67306R00003 Right Opening 1-1/4" (31.75mm) 2" (51mm)

67306L00004 Left Opening 1-3/4" (44.5mm) 2" (51mm)

67306R00004 Right Opening 1-3/4" (44.5mm) 2" (51mm)

67306L00006 Left Opening 2" (51mm) 3" (76mm)

67306R00006 Right Opening 2" (51mm) 3" (76mm)

67306L00008 Left Opening 1-1/4" (32mm) 2" (51mm)

67306R00008 Right Opening 1-1/4" (32mm) 2" (51mm)

Model No. Width Length Pin Dia.

67307000004 7/8" (22mm) 2-1/8" (54mm) 3/16" (5mm)

67307000006 1-5/32" (28mm) 3-1/8" (79mm) 1/4" (6mm)

Model No. Width/Open Length

67303000004 2" (51mm) 2" (51mm)

67303000008 3" (76mm) 3" (76mm)

CABINET DOOR HINGES


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7301 SERIES CONTINUOUS HINGES• 18/8 stainless steel hinge with stainless steel pin• 72" (1829mm) length• Furnished without holes

7304 SERIES LATCH HINGES• Stainless steel

FOR PIVOT HINGES, SEE REACH-IN SECTION.

A

Ref. Model No. Gauge Width Length Pin Dia.

A 67304000004 .040" (1.0mm)

1/2" (13mm)

7/8" (22mm)

.125" (3.2mm)

B 67304000006 .040" (1.0mm)

3/4" (19mm)

1-3/8" (35mm)

.156" (4.0mm)

C 67304000008 .050" (1.3mm)

7/8" (22mm) 2" (51mm) .187"

(4.8mm)

D 67304000010 .062" (1.6mm)

1" (25mm)

2-3/4" (70mm)

.250" (6.4mm)

Model No. Gauge Width Pin Dia.

67301035075 .035" (0.9mm) 3/4" (19mm) .086

67301035106 .035" (0.9mm) 1-1/16" (27mm) .086

67301035150 .035" (0.9mm) 1-1/2" (38m) .086

67301040106 .040" (1.0mm) 1-1/16" (27mm) .091

67301040150 .040" (1.0mm) 1-1/2" (38mm) .091

67301040200 .040" (1.0mm) 2" (51mm) .091

67301050200 .050" (1.3mm) 2" (51mm) .120

67301060150 .060" (1.5mm) 1-1/2" (38mm) .120

67301060200 .060" (1.5mm) 2" (51mm) .120

67301060250 .060" (1.5mm) 2-1/2" (64mm) .120

Other sizes available to order.

CABINET DOOR HINGES

B

C

D


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.SLIDING DOOR HARDWARE

7318 SERIES OVERHEAD TRACK, DOOR SHEAVES, DOOR GUIDES & PINS, AND DOOR STOP

A

C

B

D

Ref. Model No. Item Description

A

67318003310048

Overhead Sliding Door Track, Extruded Aluminum

48" (1219mm) L

67318003310060 60" (1524mm) L

67318003310072 72" (1829mm) L

67318003310120 120" (3048mm) L

67318003310144 144" (3658mm) L

67318000005 Front Door Sheave. Side-mounted, Zinc Plated Steel Hanger For 3/4"(19mm) Door.

Flat, Nylon Surface, Steel Races, Ball Bear-ing Wheel

67318000024

Flat, Black Nylon Sur-face, Steel Races, Ball Bearing Wheel, High Temperature: F° (C°)

67318000007Rear Door Sheave. Side-mounted, Zinc Plated Steel Hanger For 3/4"(19mm Door.

Flat, Zinc Plated Steel Ball Bearing WheelFlat, Nylon Surface, Steel Races, Ball Bear-ing Wheel

67318000026

Flat, Black Nylon Sur-face, Steel Races, Ball Bearing Wheel, High Temperature: F° (C°)

B 67318000009 Door Stop Zinc Plated Steel, Rub-ber Bumper

C 67318000010 Door Guide, For 3/4" (19mm) Sliding Doors.

Nylon, For Bypassing Installation

D 67318000011 Guide Pin Spring-loaded, Push On Speed Nuts

A

B A

C

D


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

RUBBER BUMPERS AND GROMMETS

Ref. Model No. A B C D E F

RECESSED BUMPERS

1 67501000101 5/8" (16mm)

5/16" (8mm)

3/16" (5mm)

1/8" (3mm) 1/4" (6mm) 3/16"

(5mm)

2 67501000102 15/16" (24mm)

3/8" (10mm)

3/16" (5mm)

3/16" (5mm)

3/8" (10mm)

5/32" (4mm)

STEM BUMPERS

3 67501000201 3/8" (10mm)

5/16" (8mm)

.196" (5mm)

3/16" (5mm) 1/8" (3mm)

BUTTON BUMPERS

467501000301 3/8"

(10mm)1/4" (6mm)

1/4" (6mm)

5/16" (8mm)

3/32" (2mm)

3/64" (1.5mm)

67501000302 1/2" (13mm)

3/8" (10mm)

3/16" (5mm)

1/4" (6mm) 1/8" (3mm) 1/16"

(2mm)

5 67501000303 1/2" (13mm)

3/8" (10mm)

3/16" (5mm)

1/4" (6mm)

3/16" (5mm)

1/16" (2mm)

GROMMETS

6

67501001101 9/16" (14mm)

1/4" (6mm)

1/4" (6mm)

1/16" (2mm)

3/8" (10mm)

67501001102 5/8" (16mm)

3/8" (10mm)

1/4" (6mm)

1/16" (2mm)

1/2" (13mm)

67501001103 13/16" (21mm)

1/2" (13mm)

9/32" (5mm)

1/16" (2mm)

5/8" (16mm)

7 67501001104 9/16" (14mm)

1/4" (6mm)

5/16" (8mm)

1/8" (3mm)

3/8" (10mm)

LARGE DIAMETER GROMMETS

867501001201 1-7/8"

(47mm)1-1/8" (29mm)

3/8" (10mm)

1/16" (2mm)

1-1/2" (38mm)

67501001202 2-7/8" (73mm)

2-1/8" (54mm)

7/16" (11mm)

1/16" (2mm)

2-1/2" (64mm)

PRESSURE SENSITIVE BUMPERS

967501000401 .20" (5mm) .44"

(11mm)

67501000402 .38" (10mm)

.75" (19mm)

CONDUIT SLEEVE

10 67501000002

7501 SERIES SOLID RUBBER BUMPERS, GROMMETS, AND SLEEVE


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.HEAVY DUTY DRAWER SLIDES

520 SERIES EXTRA HEAVY DUTY DRAWER SLIDES• #300 series, 14 GA stainless steel slides• Stainless steel or Delrin rollers with stainless steel ball bearings and screws• Heavy duty load capacity• Height is 2-7/16" (62mm)• Side mounting with simple installation and removal• Full travel drawer extension for easy access• Slides stay in position even when drawer is removed• Eight ball bearing assemblies included; additional rollers may be

ordered separately• Meet sanitary code requirements


6052000000420 SS Rollers 20" (508mm)

6052000000422 SS Rollers 22" (559mm)

6052000000424 SS Rollers 24" (610mm)

6052000000426 SS Rollers 26" (660mm)

6052000000520 Delrin Rollers 20" (508mm)




60520000012 Accessory Pack, 8 Sets SS Rollers w/Screws

NOTE: To determine maximum length, measure from inside face to far rear of drawer.

1-1/4”32mm

2-37/64”65.5mm

3/4”19mm


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

DRAWER SLIDES

260 SERIES STAINLESS STEEL DRAWER SLIDES• #300 series stainless steel slides. • All stainless steel rollers with ball bearing action.• Standard duty load capacity.• Side mounting; 5/8" (15mm) space required.• Drawer extends length of slide less 4-1/4" (107mm).

Model No. Length

6026000000414 14" (350mm)

6026000000416 16" (400mm)

6026000000418 18" (450mm)

6026000000420 20" (508mm)

6026000000422 22" (559mm)

6026000000424 24" (610mm)

6026000000426 26" (660mm)

60260000012 Accessory Pack, 8 Sets SS Rollers w/Screws


1-27/32”47mm

7/8”22mm

1/64”0.4mm

17/32”13.5mm


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.ECONOMY DRAWER SLIDES

521SERIES TWO-RAIL DRAWER SLIDES• Cold rolled steel is zinc plated with clear chromate finish. Up to 75 lb. (34kg) load

capacity based on 18" (457mm) slide length.• Side mounting.• Drawer extends length of slide less 4-1/4" (107mm).• Drawers and rails are easily removed. • Feature positive stops and finger-tip release.

Model No Length

6052100001312 12" (305mm)

6052100001314 14" (356mm)

6052100001316 16" (406mm)

6052100001318 18" (457mm)

6052100001320 20" (508mm)

6052100001322 22" (559mm)

6052100001324 24" (610mm)

6052100001326 26" (660mm)

6052100001328 28" (711mm)



0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

DRAWER SLIDE ROLLERS AND WHEELS

A/B C

D

A. SOLID DELRIN OR STAINLESS STEEL BALL BEARING ROLLERS• Complete with removable stainless steel threaded fastener

B. STAINLESS STEEL BALL BEARING ROLLERS• #300 Series stainless steel with hardened ball bearings• Provided threaded fastener

C. MOLDED PLASTIC WHEELS• Double row ball bearings with stainless steel balls• Anti-contamination shield• Plated steel bushing, 1/4” (6mm) I. D• Quiet, non-marking action

D. STAINLESS STEEL OR ZINC PLATED STEEL WHEELS• All metal construction• Heat treated inner and outer raceways• Use with 1/4” (6mm) diameter rod for drawer slides and

conveyor assemblies• Other styles available.

Ref. Model No. Description Dim. A Dim. B Dim. C Dim. D

A60520000002 Stainless Steel Roller, w/1” screw 1.095" (28mm) .375" (10mm) .187" (5mm) .500" (13mm)

60520000003 Delrin Roller 1.095" (28mm) .375" (10mm) .187" (5mm) .500" (13mm)

B60260000002 SS Roller, 3/4" L Screw .760" (19mm) .250" (6mm) .187" (5mm) .420" (10.7mm)

60260000003 SS Roller, 7/8" L Screw .760" (19mm) .250" (6mm) .187" (5mm) .420" (10.7mm)

C 67319000101 Molded Plastic Skate Wheel 1.900" (48mm) .630" (16mm) .310" (8mm) .590" (15mm)

D

67319000201 SS Skate Wheel 1.940" (49mm) .630" (16mm) .170" (4mm) .440" (11mm)

67319000202 Steel Skate Wheel 1.940" (49mm) .630" (16mm) .170" (4mm) .440" (11mm)

67319000203 Steel Skate Wheel, 1/16" (1.6mm) Offset 1.940" (49mm) .630" (16mm) .070" (1.8mm) .380" (10mm)

67319000204 SS Skate Wheel, HD, 11/16" (18mm) Hub 1.940" (49mm) .560" (14mm) .100" (2.5mm) .530" (14mm)

67319000205 SS Skate Wheel, HD, 5/8" (16mm) Hub 1.940" (49mm) .560" (14mm) .100" (2.5mm) .530" (14mm)

67319000206 SS Skate Wheel, Countersunk Hole 1.940" (49mm) .550" (14mm) .170" (4mm) .500" (13mm)

A

B

C

DA

BC

D

A

B

C

D


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

FLAT BALL BEARING SYSTEMS

A

BC

D

7319 SERIES FLAT BEARINGS WITH 10-32 TAPPED HOLE

Ref. Model No. Inner Race Material

Outer Race Material Dim. A Dim. B Dim. C Dim. D Load

Rating

B 67319000601 Stainless Steel Stainless Steel 7/8" (22mm)

1/4" (6mm)

3/8" (10mm)

1/2" (13mm)

80 lb (35kg)

7319 SERIES FLAT BEARINGS WITH SMOOTH HOLE



Rating

A

67319000301 Stainless Steel Stainless Steel 1-5/16" (33mm)

5/16" (8mm)

3/8" (10mm)

1/4" (6mm)

87 lb (38kg)

67319000304 Steel Steel 7/8" (22mm)

7/32" (6mm)

9/32" (7mm)

1/4" (6mm)

42 lb (19kg)

67319000305 Steel Steel 1" (25mm) 5/16" (8mm)

3/8" (10mm)

1/4" (6mm)

57 lb (25kg)

67319000306 Steel Steel 1" (25mm) 7/32" 6mm)

9/32" (7mm)

1/4" (6mm)

57 lb (25kg)

67319000307 Steel Steel 1-5/16" (33mm)

5/16" (8mm)

3/8" (10mm)

1/4" (6mm)

87 lb. (39kg)

67319000308 Steel Nylon & Steel 1" (25mm) 7/32" (6mm)

9/32" (7mm)

1/4" (6mm)

53 lb (24kg)

67319000309 Stainless Steel Stainless Steel 29/32" (23mm)

1/4" (6mm)”

5/16" (8mm)

1/4" (6mm)

90 lb (40kg)

DELRIN & STAINLESS STEEL BALL BEARING ASSEMBLIES

Ref. Model No. Description Dim. A Dim. B Dim. C Dim. D Thread

C

60260000002 Stainless Steel .760" (19mm)

.250"(6mm)

.187" (5mm)

.420" (10mm) 10-24

60520000002 Stainless Steel 1.095" (28mm)

.375" (10mm)

.187" (5mm)

.500" (13mm) 1/4-20

60520000003 Delrin 1.095" (28mm)

.375" (10mm)

.187" (5mm)

.500" (13mm) 1/4-20

DA

BC

B

A D

C

A

B

C

BALL BEARING SYSTEMS


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.CONCAVE BALL BEARING SYSTEMS

7319 SERIES FLAT BEARINGS WITH 1/4-20 SCREW


Outer Race Material A B C D Load

Rating

E

67319000501 Steel Steel 7/8" (22mm)

7/32" (6mm)

3/8" (10mm)

3/8" (10mm)

42 lb (19kg)


1/4" (6.4)

11/32" (9mm)

5/16" (8mm)

90 lb (40kg)

67319000503 Steel Steel 1-5/16" (33mm)

5/16" (8mm)

19/32" (15mm)

3/8" (10mm)

87 lb (39kg)

7319 SERIES FLAT BEARINGS W/ 1/4” (6mm) RIVET



Rating

D

67319000401 Steel Steel 7/8" (22mm)

7/32" (6mm)

3/8" (9.5mm)

1/8" (3mm)

42 lb (19kg)

67319000402 Steel Steel 1" (25mm)

7/32" (6mm)

3/8" (9.5mm)

1/8" (3mm)

57 lb (25kg)

67319000403 Steel Steel 1-5/16" (33mm)

5/16" (8mm)

3/8" (9.5mm)

3/32" (2mm)

87 lb (39kg)

67319000404 Steel Steel 1-5/16" (33mm)

5/16" (8mm)

9/32" (7mm)

3/16" (8mm)

87 lb (39kg)

67319000405 Steel Nylon & Steel 1" (25mm)

7/32" (6mm)

3/8" (9.5mm)

1/8" (3mm)

53 lb (24kg)


1/4" (6.4mm)

11/32" (9mm)

1/8" (3mm)

90 lb (40kg)

7319 SERIES STAINLESS STEEL SCREWS FOR FLAT BEARINGS


67319000302 Spacer, .50” (12.7mm Diameter x .21” (5.3mm) Thick

67319000391 1/4-20 x 1" (25mm) L

67319000393 1/4-20 x 3/4" (19mm) L

7319 SERIES CONCAVE BEARINGS

Ref. Model No. DescriptionInner Race Material

Outer Race Material

Dim. A Dim. B Dim. C Dim. D Load Rating

A 67319000701 w/Hole Steel Steel 1-3/16" (30mm) 5/16" (8mm) 3/8" (9.5mm) 1/4" (6mm) 80 lb. (36kg)

B 67319000702 w/Rivet Stud Steel Steel 1-3/16" (30mm) 5/16" (8mm) 3/8" (9.5mm) 1/8" (3mm) 80 lb. (36kg)

C67319000703 w/Screw Stud Steel Steel 1-3/16" (30mm) 5/16" (8mm) 3/8" (9.5mm) 3/8" (9.5mm) 80 lb. (36kg)

67319000704 w/Screw Stud Steel Steel 1-3/16" (30mm) 5/16” (8mm) 19/32" 15mm) 3/8" (9.5mm) 80 lb. (36kg)

1/32”0.8mm B

A

D

C

1/32”0.8mm B

A

D

C

1/4”0.6mm

1/32”0.8mm B

A D

C

1/32”0.8mm B

A

DC

1/4”0.6mm

1/32”0.8mm B

A

DC

B CA

D

E

BALL BEARING SYSTEMS


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

STAINLESS STEEL DRAWER ASSEMBLIES• Heavy duty, sanitary, #304 stainless steel• Welded construction with cross brace for extra strength

and durability• 16 GA. stainless steel front• Furnished with removable stainless steel pan for

easy cleaning.• Cylinder locking and non-locking models• 200 lb. load capacity per drawer• Integrated pull handle on full extension drawer for ease

of use and pan removal• Ready to install with predrilled, slotted mounting holes• Two sizes: 15" x 20" and 20" x 20" to fit most cabinets.

SLOTTED MOUNTING HOLES

1/2"13mm

5/16"8mm

Ref. Model No. Pan Material & Size (WxD) Lock Dim. A Dim. B Dim. C Dim. D

A67102000015* Steel Pan

15" x 20" (381 x 508mm)None 17-3/4"

(451mm)16-1/2" (419mm)

13-5/8" (346mm)

19-9/16" (497mm)67102C00015* Cylinder

B67102000020* Steel Pan

20" x 20" (508 x 508mm)None 23-3/8"

(594mm)22-1/8" (562mm)

19-1/4" (489mm)

25-1/16" (636mm)67102C00020* Cylinder

NOT SHOWN

67102000016 Plastic Pan 15" x 20" (381 x 508mm)

None 17-3/4" (451mm)

16-1/2" (419mm)

13-5/8" (346mm)

19-9/16" (497mm)67102C00016 Cylinder

67102000021 Plastic Pan 20" x 20" (508 x 508mm)

None 23-3/8" (594mm)

22-1/8" (562mm)

19-1/4" (489mm)

25-1/16" (636mm)67102C00021 Cylinder

*TO ORDER DRAWER ONLY, WITHOUT PAN, USE MODEL NUMBERS FOR ITEMS A OR B AND ADD INITALS “NP” TO END OF NUMBER.

7102 SERIES DRAWER ASSEMBLIES

7/8”(22mm)

D

22-15/16”(583mm)19-15/16”(506mm)

1-1/2”(38mm)

A B C

6-7/8”(175mm)

BA


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

STAINLESS STEEL DRAWER PANS• Heavy 18-8 stainless steel construction with bright finish• Two sizes available• Meet NSF criteria • Use in food warmers, foodservice tables, coolers

and freezers

A

C D

B

5“127mm

7102 SERIES STAINLESS STEEL DRAWER PANS

Ref. Model No. Nominal Size W x L Dim. A Dim. B Dim. C Dim. D

A 67102004115 15” x 20” (381 x 508mm) 16” (406mm) 14-3/4” (375mm) 21-1/2” (546mm) 20-3/16” (513mm)

B 67102004120 20” x 20” (508 x 508mm) 21-1/2” (546nn) 20-3/16” (513mm) 21-1/2” (546mm) 20-3/16” (513mm)

7102 SERIES THERMOPLASTIC DRAWER PANS

Ref. Model No. Nominal Size W x L Dim. A Dim. B Dim. C Dim. D

C 67102004215 15”x20” (381 x 508mm) 16-1/8” (410mm) 15-1/16” (383mm) 21-5/8” (549mm) 20” (508mm)

D 67102004220 20”x20” (508 x 508mm) 21-5/8” (549mm) 20” (508mm) 21-5/8” (549mm) 20” (508mm)

E 67102004221 20”x20” (508 x 508mm) 21-5/8” (549mm) 20” (508mm) 21-5/8” (549mm) 20” (508mm)

7102 SERIES DRAWER PANS

7102-4215 & 7102-4220

7102-4221

HEAVY DUTY THERMOPLASTICDRAWER PANS• Three popular sizes• Lightweight and sanitary• Smooth inside, textured outside• Full flange and coved corners

B

D

E

A

C


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

STAINLESS STEEL DRAWER ASSEMBLIES• Full extension drawer slides• Easy to operate and mount under counter• Available with and without a currency tray• Made of durable stainless steel with a stainless steel faced cylinder lock

7602 SERIES CASH DRAWER AND CURRENCY TRAY

Model No. Material Description

67602000100 Stainless Steel Cash Drawer Assembly with Money Tray

67602000101 Stainless Steel Cash Drawer Assembly without Money Tray

67602000102 Painted Steel Money Tray with Cover


© 2012 Kason Industries, Inc., All Rights Reserved 6.2012

KASON INDUSTRIES IS PLEASED TO INTRODUCEHIGH QUALITY CASH DRAWERS AND MONEY TRAYS

FOR ALL OF YOUR IN-STORE NEEDS

FEATURES:• Full extension drawer slides.• Easy to operate and mount under

counter.• Available with and without the

currency tray.

For more information, please contact your local Kason Branch Office tollfree at 1-800-935-2766 or visit us on the web at www.kasonind.com.

Kason Western 1500 E. Wooley Road Oxnard, CA 93030 www.kasonind.comWESTERN Email: [email protected]

Phone: 805-247-1088Fax: 805-247-1164

CASH DRAWER AND CURRENCY TRAY

Kason Central 8889 Whitney Drive Lewis Center, OH 43035 www.kasonind.comCENTRAL Email: [email protected]

Phone: 740-549-2100Fax: 740-549-0701

Kason Canada 226 Industrial Pkwy. N. Unit 3A Aurora, Ontario L4G 4C3 www.kasonind.comCANADA Email: [email protected]

Phone: 905-713-6515Fax: 905-713-6518

Kason FoodService 31-A Amlajack Blvd. Newnan, GA 30265 www.kasonind.comFOODSERVICE Email: [email protected]

Phone: 678-423-0722Fax: 770-252-8397

Kason Mid America 1239 Atlantic Street N. Kansas City, MO 64116 www.kasonind.comMID AMERICA Email: [email protected]

Phone: 816-472-7450Fax: 816-472-8580

Kason FoodService 31-A Amlajack Blvd. Newnan, GA 30265 www.kasonind.com

FOODSERVICE Email: [email protected]: 678-423-0722

Fax: 770-252-8397 Kason Central 8889 Whitney Drive Lewis Center, OH 43035

CENTRAL Email: [email protected]: 740.549.2100

Fax: 740.549.0701www.kasonind.com

Kason’s cash drawer is made of durable stainless steel with a stainless steel faced cylinder lock to ensure your product will last for as long as you need it to.


Model No. Material Description

7602000100 SS Cash Drawer Assembly with Money Tray

7602000101 SS Cash Drawer Assembly without Money Tray

7602000102 Painted Steel Money Tray with Cover

New Product!


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

SHELF AND TRAY SLIDE BRACKETS

7”178mm

2-7/32”56mm

7-1/8”181mm

2-3/16”56mm

7-15/16”190mm

2-13/16”71mm

DROP SHELF BRACKETS• Fold down when not in use• Two-piece lift-off assembly• Shelves easily removed for cleaning• Smooth, trouble-free operation• Supports 250 lbs. (113kg) dead weight using a 10"

(254mm) shelf with pair of brackets mounted 24" (610mm) apart

TRAY SLIDE BRACKETS• #300 series, 8 gauge stainless steel with #4 satin finish• Supports three 1" O.D. rails• Mounts with 5/16" (8mm) screws

8-5/8"218mm

2-5/8"66mm

3-15/16”100mm

3-15/16”100mm

3-15/16”100mm

17/32”13.5mm

4“101.6mm

4-1/2”114.3mm

4-1/2”114.3mm

17/32”13.5mm

D

DROP SHELF BRACKETS

Ref. Model No. Item

A 10099000008 Zinc Plated Steel Bracket

B 10105000001 304 Stainless Steel Bracket

C 60109000004 Chrome Plated Die-Cast Bracket with 304 Stainless Steel Shelf Mount

D 60310000002 Fold Down Shelf Bracket, Stainless Steel

N/A 60310000005 Fold Down Tray Slide Bracket

310 SERIES TRAY SLIDE BRACKETS

Ref. Model No. Item

E 60310000003 SS, 3-rail

F 60310000006 SS, 3-rail

BA

C

E/F

G13-1/2” 343mm 10-1/2”

267mm

3“76mm

STATIONARY SHELF BRACKET• #300 Series stainless steel with #4 satin finish. Supports

10-1/2" wide shelf

310 SERIES STATIONARY BRACKET

Ref. Model No. Description

G 60310000004 Stainless Steel

OPERATION

A/B/D: To lower shelf, lift slightly, pull out and pivot down to folded posi-tion. To raise shelf, just lift; shelf will lock in place.

C:To lower shelf, pull out and fold down. To raise shelf, lift and push in to lock in place.


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.U-BENDS AND ELBOWS

END CAPS FOR U-BEND & ELBOWS• Nickel plated steel• Two sizes fit 1” and 1-5/8” tubing

7107 SERIES STAINLESS STEEL ELBOWS• 90° elbows for 1" (25mm) or 1-5/8" (41mm) O.D. tubing• Use for rails, supports and more• Custom bends available• Satin finish

310 STAINLESS STEEL U-BEND• Fits 1" (25.4mm) O.D. tubing• Use for tray slide rails• Custom bends available• Satin finish

Model No. Application

60310000007 1" (25mm) Tubing


67503000301 1" (25mm) O.D. tubing

67503000303 1-5/8" (41mm) O.D. tubing

Model No. Application A B C

67107000004 1" (25mm) O.D. tubing 4" (102mm) 4" (102mm) 1-1/2"

(38mm)

67107000006 1-5/8" (41mm) O.D. tubing 10" (254mm) 10"

(254mm)4-3/8" (111mm)


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

TUBING ACCESSORIES

1655 SERIES TUBULAR SUPPORTS• Stainless steel for 1-5/8" (41mm) O.D. tubing• Locks with double set screw• Plated inside liner.

Model No. Length

61655000271 3-3/16" (81mm)

61655000272 5-1/4" (133mm)

61655000273 1-7/8” (48mm)/1 Set Screw

BLACK THERMOPLASTIC FOR SQUARE TUBING

NICKEL PLATED STEELFOR ROUND TUBING

ROUND THERMOPLASTIC END CAPS

Model No. Size Gauge

67503000101 1" (25mm) O.D. 18

67503000102 1-1/4" (32mm) O.D. 18

67503000103 1-1/4" (32mm) O.D. 16

67503000104 1-1/2" (38mm) O.D. 16

67503000105 1-5/8" (41mm) O.D. 16

SQUARE THERMOPLASTIC END CAPS


67503000201 1" (25mm) 18

67503000202 1" (25mm) 16

67503000203 1-1/4" (32mm) 18

67503000204 1-1/2" (38mm) 18 1700 SERIES EXPANDING FASTENERS• Fits round or square tubing• Installs fast with 1/2" (13mm) bolts


61700000010 1" (25mm) Tubing

61700000012 1-1/4" (32mm) Tubing

61700000015 1-1/2” (38mm) Tubing

61700000016 1-5/8" (41mm) Tubing

BLACK THERMOPLASTIC FOR ROUND TUBING

7503 SERIES END CAPS

ROUND NICKEL PLATED STEEL END CAPS


67503000301 1" (25mm) O.D. N/A

67503000303 1-5/8" (41mm) O.D. N/A


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.LID COVER BRACKETS AND POT RACK ACCESSORIES

7100 SERIES POT RACK HOOKS • Available in #300 series stainless steel or bright zinc

plated steel.• Use with pot rack banding, shown below.

7300 LID COVER BRACKETS• Heavy duty stainless steel construction• Right & left brackets and four pivot pins with screws• Supports metal lid or plastic bubble on prep or

condiment line• Hold-open position for fast serving• Lift-away feature allows easy removal for cleaning


67300000002 Bracket Set

7100 POT RACK BANDING• Polished, #300 series stainless steel, 180 grit finish• Size is 1/4" D x 2" W x 12' L (6mm x 51mm x 366cm)




67100000010 Stainless Steel Double Prong

67100000011 Stainless Steel Single Prong

67100000012 Steel Double Prong

67100000013 Steel Single Prong


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7504 SERIES DIPPERWELL AND SCRAP BLOCKS

DIPPERWELL ASSEMBLY• Fits 6" (150mm) diameter opening• 18-8 stainless steel inner and outer shells and drain; nickel

plated brass tailpiece• Available as individual parts

6-7/8"174mm

5-5/8"143mm

3/8"9.5mm

5-1/2"140mm


67504000202 Dipperwell Assembly without Faucet

67504000204 Dipperwell Assembly with Faucet

67504KL0205 Dipperwell Faucet

7504 SCRAP BLOCKS

6-5/8"168mm

3-3/4"95mm

2-7/8"73mm

5-11/16"144/5mm

8-3/4"222mm

4-1/8"105mm

5-11/16"144.5mm

3"76mm

A B

Ref. Model No. Description For Opening

A 67504000101 Solid Rubber, Cyl-inder 5-3/4" (146mm) Dia.

B 67504000102 Solid Rubber, Funnel 5-3/4" (146mm) Dia.

Brett Mitchell 2015.10.29 09:31:04 -04'00'

NSF/ANSI 372

MATERIAL/FINISHHigh pressure die-cast zinc tongue housing and strike; nylon rollers

MOUNTINGMounts with 1/2” NPS male inlet, furnished with male union tailpiece and mounting hardware


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.7504 SERIES SCRAP CHUTES

Ref. Model No. Description For Opening Height

A 67504000201 Scrap Chute Stainless Steel 6" (152mm) Dia. 5" (127mm)

B 67504000206 Scrap Chute Stainless Steel 6" (152mm) Dia. 2" (51mm)

C 67504000208 Scrap Chute Stainless Steel 8" (203mm) Dia. 2" (51mm)

D 67504000210 Scrap Chute Stainless Steel 10" (254mm) Dia. 2" (51mm)

E 67504000212 Scrap Chute Stainless Steel 12" (305mm) Dia. 2" (51mm)

AC

B

D

E

SCRAP CHUTE• Stainless steel construction with satin finish and bright

polished flange top• 2” high models provide lower profile for more under-

counter clearance

C

D

E

BA


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

GLASS FILLER AND DRIP PLATES

80 SERIES STAINLESS STEEL DRIP PLATES• For use in beverage dispensers• Stainless steel material• No. 4 satin finish• Length is 72" (1830mm) for economical shipping• Engineered for economy

450 SERIES GLASS FILLERS• Two-position lever arm pushes back to fill single glass;

rotates up for continuous flow.• Fully adjustable spout regulates water flow.• Highly polished chrome-plated brass with stainless steel

riser, lever arm and internal parts for long wear under heavy use

• Mount with supplied 1/2" NPS male inlet and mounting hardware

• One year limited warranty

72”1828.8mm

WIDTH

5-1/4”133mm

4-1/4”108mm

9-1/2”241mm

2-3/4” 70mm

8-1/8” 206mm


60450KL0001 Deck Mount

Ref. Model No. Width Gauge

A 60080000007 7" (177.8mm) 24

A 60080000009 9" (228.6mm) 24

B 60080000017 7" (177.8mm) 22

B 60080000019 9" (228.6mm) 22

C 67505000101 Finishing Ring, for 7/8" (22mm) Dia. Hole

D 67505000102 Finishing Ring, for 1" (25mm) Dia. Hole

B

A

DCNSF-61/9-G


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.7104 SERIES STAINLESS STEEL SINK INSERTS


A 67104000101 Cove Corner, 90 DEG

B 67104000102 Cove Corner, 220 DEG

C 67104000201 Bull Nose, 1-1/2”

D 67104000202 Bull Nose, 2”

E 67104000301 Triangular

F 67104000401 Square Corner, 1-1/2”

G 67104000402 Square Corner, 1-5/8”

H 67104000403 Square Corner Insert

I 67104000404 Square Corner, 1-3/8”

H

1-7/1637mm

1/2”13mm

1-13/32”36mm

1-13/32”36 mm 1/2”

13 mmB

A

1-1/16”27mm1-1/16”27 mm

D

1-1/4”32mm

2”52mm

2”52 mm

1-1/4”32 mm

G

1-5/8”42mm

23/32”18mm

1-1/32”26mm

23/32”18 mm

1-1/32”26 mm

1-5/8”42 mm

F

1-1/16”27mm

1-7/32”31mm1-1/16”

27 mm1-7/32”31 mm

E

1”25mm1”

25 mm

C

13/16”21mm

1-21/32”42mm

13/16”21 mm

1-21/32”42 mm

I


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7324 SERIES CONVEYOR ROLLERS


A 67324000001 Plastic Conveyor Roller Bearings

B 67324100480 1.90” (48, 3mm) OD gray PVC tubing, 48” (1.2m) long

C 67324000010 Flanged stainless steel bearing assembly

D 67324000720 7/16” (11,1mm) stainless steel hex rod, 72” (1.8m) long

CONVEYOR ROLLERS• Tubing and hex rod can be cut down for

smaller applications• Suitable for foodservice use• Can be steam cleaned• Will operate in temperatures up to 150°F (66°C).

A C

B D


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.7106 ESCUTCHEON PLATES

7106 ESCUTCHEON PLATES• Decorative cover for 1-5/8 tubing• Stainless steel with #4 satin finish

1701 SERIES KNURLED BUSHINGS• For positive concealed fastening• Zinc plated finish resists corrosion• For use with 16 gauge tubing only

7106-100 7106-101


67106000100 Escutcheon Plate

67106000101 Escutcheon Plate

67106000200 Escutcheon Plate 1-1/4 Square

67106000201 Escutcheon Plate 1-1/2 Square


61701000016 Knurled Bushing 1 5/8 in. Tube 5/16-18

61701000017 Knurled Bushing 1 1/4 in. Tube 5/16-18

61701000018 Knurled Bushing 1 in. Tube 1/4-20

7106-201

Mark Kennedy cn=Mark Kennedy, o=Kason Industries, ou=Food Service, [email protected], c=US 2017.09.12 16:30:35 -04'00'


7106-200


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

7500 SERIES HOOD FABRICATION ACCESSORIES

7500 STAINLESS STEEL GLASS CAPPING, MIRROR MOLDING, DIVIDER BARS AND CAP STRIPS• No. 430 Series stainless steel construction• Meets fabricators’ specifications• Satin finish available

D

3/8”10mm

5/16”8mm

CA


EB

I

3/4”19.1 mm

3/16”5 mm

HJ

F GRef. Model No. Description Material Application Length

A 67500000411144 Tee Divider N/A 12' (366cm)

B 67500000900144 Glass Capping 1/4" (6mm) 12' (366cm)

C 67500000901144 Glass Capping 7/32" (6mm) 12' (366cm)

D 67500000914144 Mirror Molding 3/8" (9.5mm) 12' (366cm)

E

67500001450 Divider Bar 1/16" (1.6mm) 7' (213cm)

67500001450096 Divider Bar 1/16" (1.6mm) 8' (244cm)

675000014500985 Divider Bar 1/16" (1.6mm) 8.2' (2.5m)

67500001450120 Divider Bar 1/16" (1.6mm) 10' (305cm)

67500001450144 Divider Bar 1/16" (1.6mm) 12' (366cm)

F

67500001451 Cap Strip 1/16" (1.6mm) 7' (213cm)

67500001451096 Cap Strip 1/16" (1.6mm) 8' (244cm)

675000014510985 Cap Strip 1/16" (1.6mm) 8.2' (2.5m)

67500001451120 Cap Strip 1/16" (1.6mm) 10' (305cm)

G 67500001452144 Glass Capping 3/16" (5mm) 12' (366cm)

H 67500001453144 Mirror Molding 1/4" (6mm) 12' (366cm)

I 67500000225 Flat Snap-on Molding 3/4" (19mm) 12' (366cm)

J 67500000226 Flat Snap-on Molding 1" (25mm) 12' (366cm)


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.ELECTRICAL ACCESSORIES

SWITCHES, RECEPTACLES AND COVER PLATES

A PILOT SWITCHES• Specification grade• Rated 15A, 120V AC

OPTION: • 220V single pole

STAINLESS COVER PLATE • Stainless steel• Use with pilot switches

B

C

D BLANK COVER PLATE• Stainless steel

RECEPTACLE• Commercial grade• Black plastic

E COVER PLATE• Stainless steel• For single toggle switch.

LARGE UTILITY BOX• Tapered aluminum• 1/2” (12.7mm) knockouts• 2-1/8” (54mm) deep

G

Ref. Model No. Item

A

3EEAI000277 Switch, Single Pole, Ivory

3EEAB000277 Switch, Single Pole, Brown

3EEAI000277C Switch, Single Pole, CSA Listed, Ivory*

3EEAI000294 Switch, 3-way, Ivory

3EEAB000294 Switch, 3-way, Brown

3EEAI000294C Switch, 3-way, CSA Listed, Ivory*

B 3EEA00000S8 Cover Plate for Switches (A)

C3EEABL00827 Receptacle, 15 Amps.

3EEABL00877 Receptacle, 20 Amps.

D 3ELE0000100 Blank Cover Plate

E 3ELE0000101 Cover Plate for Single Switch

F 3ELE0000102 GFCI Receptacle & Cover Plate

G 3ELE0000104 Utility Box, 2-1/8” Deep Box

H 67317000101 Rocker Switch

*CSA switches also available Brown or White.

F

GFCI RECEPTACLE• Ground fault circuit

interrupter for wet locations

• 125 VAC-15 AMPs at receptacle; 20-AMP feed through

• Complete with cover plate

H

7317 ROCKER SWITCH• Contact switch• Plate mounted rocker switch• Bakelite plunger• Flush mounting


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.

ELECTRICAL ACCESSORIES

5-3/4"146mm

6-3/8"162mm

4"102mm

4-5/8"117.5mm

3-7/8"98mm

2-1/8"54mm

7109 SERIES ELECTRICAL PEDESTAL BOXES• Cast aluminum with brushed satin finish• For 3/4" NPS or 1/2" NPS• Ground screw included

SATISFY YOUR RANGE HOOD ACCESSORIES REQUIREMENTS SEE KASON CANOPY HOOD ACCESSORIES, SECTION K

3-1/2"89mm

3"76mm

5-1/2"140mm

3.28"83mm

7110 SERIES RECESSED HOUSINGS• #300 series stainless steel• Internal covered corners• Accepts standard J-box for tack welding• 4,10-24 mounting screws provided

Kason Foodservice offers a selection of canopy hood filters and accessories, including• Trapper™ Grease Filters• Baffle Grease Filters• Canopy Lighting Fixtures• Divider Bars and Cap Strips• Grease Cups


67109000002 Single Face

67109000004 Double Face


67110000002 Housing w/ Cutout

67110000004 Plain Housing

CANOPY HOOD ACCESSORIES

CONTACT YOUR KASON FOODSERVICE

REPRESENTATIVE ORFOODSERVICE

CUSTOMER SERVICE

1-800-935-2766

[email protected]

VISIT OUR WEBSITE

www.kasonind.com


0119

LIT

001

©

202

0 Ka

son

Indu

strie

s, In

c.THERMAL FLEX® VINYL SWING DOORS & EASIMOUNT® STRIP CURTAINS

Description Temperature Range

Easimount® Strip Curtains - 401 Standard Smooth 0° to 150°

Easimount® Strip Curtains - 402 USDA/Low Temp Smooth -30° to 125°F

Easimount® Strip Curtains - 403 USDA/Low Temp Reinforced -30° to 125°F

THERMAL FLEX® VINYL SWING DOORS

EASIMOUNT® STRIP CURTAINS• Easy and fast installation• Easy to replace strips reduces labor/maintenance costs• Durable pre-cleated strips slide into place and help prevent

tear outs• Easy to clean clear vinyl provides high visibility• Suitable for multiple vinyl types• Universal design allows installation for walk-in coolers

and freezers

Thermal Flex® Vinyl Swing Doors offer single and double panel options to meet your specific application needs. Each system uses stainless steel components engineered to perform in the toughest commercial kitchen environments.

• Meets USDA and NSF standards• Easy-to-clean, clear vinyl material provides high visibility• Will not drag across product or snag on personnel or carts• Gravity hinge closes door quickly but gently• Exclusive adjustable cam block assures that the open door

swings back to center position• Mounting hardware included• 10-year rust-proof hinge warrantyvinyldoor opened and

closed; adapts to all door widths.

MATERIALS• Vinyl Type: 402 smooth vinyl panel• Curtain Channel: Extruded aluminum• Hinge Brackets and Arm: Stainless steel• Mounting Hardware: Stainless steel

DOOR OPENING SIZE• Maximum single panel width: 36”

SPECIAL APPLICATIONS• Heavy duty hinges available for wide

doors

SPECIFICATIONS

MATERIALS• Vinyl Strip Types: Multiple • Mounting Channel:

Extruded aluminum• Mounting Hardware:

Stainless steel• End Caps: Polypropylene

DOOR OPENING SIZE• Standard: 38” x 84” for

openings 30”–38” wide• Standard: 42” x 84” for

openings 38”–42”wide• Additional Sizes Available @

800.935.2766

SPECIFICATIONS

Documents

CABINE T & CAFETERIA ACCESSORIE S - Kason IndustriesCABINE T & CAFETERIA ACCESSORIE S ... • Cabinets and Cafeteria Equipment • Truck Bodies • Panelock™ Panel Fasteners •