Creative Fabrica

© Creative Fabrica

Embroidery DesignSewing Information

www.creativefabrica.com/embroidery/

Wallet or the main part

(only 1 size)

The design is compatible (suitable) with base empty wallet. This main part can be an independent

product. It is enough to fold it along the bottom line and sew it on the sides.

The basic wallet is sold in my store.

Recommended fabrics.

The choice of fabric depends on your preferences.

I use eco-leather and vinyl leather with a thickness of 0.6-0.85 mm. If the skin is very thin, it should

be glued with a thin dublerin. You can also use cotton linen, satin.

The filler – rubber foam with a thickness of 5 mm or polyester batting 80 or 100.

Necessary materials. For 8x12 Fabric - eco-leather, vinyl - 9,36 " x 13,26" (24 x 34 cm)

Interfacing fabric (Lining) - 9,36 "x 13,26" (24 x 34 cm)

Polyester batting - 9,36 " x 13,26" (24 x 34 cm)

For 7x11 Fabric - eco-leather, vinyl - 8,58" x12,48" (22 x 32 cm)

Interfacing fabric (Lining) - 8,58" x12,48" (22 x 32 cm)

Polyester batting - 8,58" x12,48" (22 x 32 cm)

For 6x10 Fabric - eco-leather, vinyl - 7,8 " x 11,7" (20 x 30 cm)

Interfacing fabric (Lining) - 7,8 "x 11,7" (20 x 30 cm) cm)

Polyester batting - 7,8 " x 11,7" (20x 30 cm)

Button

Download the archive to your computer. Extract the files from the archive. Download to your embroidery machine in the way

you are used to.

If you sew the wallet with 4 compartments, embroider first the side panels (file 1) from the base wallet or from the wallets with 4 compartments.

Hoop tearaway or water-soluble stabilizer.

Stitch Color 1 - the placement line for design

Remove the hoop from the machine and turn to the back side. Place the interfacing fabric face up on the back of the hoop. Fix it with glue or adhesive tape.

Stitch Color 2

If you sew the wallet with 4 compartments - These are auxiliary stitches that will serve you in the future.

Put polyester batting. You can use temporary fixation glue.

Stitch Color 3

Cut off the exceed the polyester batting around near stitch. I recommend cutting the polyester batting at this stage to avoid thick seams.

Put the main fabric face up. Fix it with glue or adhesive tape. Please note that in this model there is no any stitch that fixes the fabric to the stabilizer, since numerous tests of various fabrics have shown that some fabrics may move slightly while embroidering and therefore a fold can appear at the edge of the embroidery.

Stitch Color 4-6

If you sew the wallet with 4 compartments follow the instructions for the base wallet or the wallet with 4 compartments. also video https://youtu.be/4o9w_st0M2k

At this stage add side panel parts

Stitch Color 7 - zigzag for trimming Cut off the exceed fabric close to the stitch on both sides of the hoop.

Stitch Color 8 - satin border. Remove the stabilizer The main part of the wallet are ready.

If you sew the wallet with 4 compartments follow the instructions for the base wallet or the wallet with 4 compartments.

Fold as in the photo. To sew on the sewing machine straight stitch or zigzag stitch. Or hand stitches.

Mark the snap button location. Put or sew the button.

Thank you for your purchase. I hope you liked my design.

Also in my store

The designs is compatible (suitable) with base empty wallet.