C- INVENTREY RFP for SELECTION OF FACILITY MANAGEMENT … · 2019-04-12 · rfp for selection of facility management service provider for mantralaya mahanadi bhawan, cciid, rajdhani

RFP for SELECTION OF FACILITY MANAGEMENT SERVICE PROVIDER FOR MANTRALAYA MAHANADI BHAWAN, CCIID, RAJDHANI SAROVAR, BUILDINGS AND ITS CAMPUS AT NAYA RAIPUR, CHHATTISGARH.

1

C- INVENTREY

RFP for SELECTION OF FACILITY MANAGEMENT SERVICE PROVIDER FOR MANTRALAYA MAHANADI BHAWAN,

CCIID, RAJDHANI SAROVAR, BUILDINGS AND ITS CAMPUS AT NAYA RAIPUR, CHHATTISGARH

NAYA RAIPUR DEVELOPMENT AUTHORITY Utility-Block, Capitol Complex Sector-19, Naya Raipur-492002, Chhattisgarh

PH.NO.0771-2511500, FAX 0771-2511400, e-mail. [email protected]


2

S. No. Description/ INVENTORY Pages

APPENDIX- D: DETAILS OF MANTRALAYA MAHANADI BHAWAN AND ITS CAMPUS 1 to 8

APPENDIX- D1

INVENTORY OF INVENTORY OF CIVIL ITEM OF STATE

SECRETARIES BLOCK- NRDA RAIPUR PROJECT

9

APPENDIX- D2 FOR ELECTRICAL 10 to 26

APPENDIX– D3 INVENTORY FOR LV SYSTEM CCTV SYSTEM 27 to 28

APPENDIX– D4 CHILLERS & PLANT ROOM 29 to 43

APPENDIX– D5 HVAC 44 to 48

APPENDIX– D6 FIRE ALARM SYSTEM 49 to 50

APPENDIX– D7 ABSTRACT OF LV SYSTEM, CCTV SYSTEM 51

APPENDIX– D8 LIST OF INVENTORY FOR STATE SECRETARIES BLOCK TOILETS 52 to 55

APPENDIX– D9 INTERIOR DECORATION FURNISHING WORK 56 to 65

APPENDIX– D10 MODULAR FURNITURES 66 to 68

APPENDIX– D11 STORAGE COMPACTORS 69

APPENDIX– D12 SOFAS & CHAIRS 70 to 71

APPENDIX– D13 SIGNAGE & NAME PLATES 72 to 73

APPENDIX– D14 AUDIO-VISUAL SYSTEMS 74 to 83

APPENDIX– D15 VIDEO PROJECTOR & TV SYSTEMS 84 to 85

APPENDIX– D16 LANDSCAPING 86 to 87

APPENDIX– D17 NEON-SIGN-BOARD 88

APPENDIX– D18 WATER COOLER, WTP, RO & FILTRATION SYSTEM 89 to 94

APPENDIX– D19 RAJDHANI SAROVAR 95 to 116

APPENDIX– D 20 INVENTORY OF Capitol Complex Integrated Development CCIID 117 to 125


3

APPENDIX- D:Details of Mantralaya Mahanadi Bhawan and its campus at and its premises under scope

Sl. no. Property Service Area Refeneces 1 Mantralaya Mahanadi Bhawan including premises

with extarnal landscaping & parking area

65000 sqm Annex-1.

2 Parking, Roads and Pathways 200000 sqm Annex-4.

3 External Landscaping, Water Bodies & Fountains 700000 sqm Annex-5.

Total 1360000 sqm


4

Annex-A

INVENTORY OF MANTRALAYA BUILDING FOR FACILITY MANAGEMENT SERVICES Particulars Details Remarks 1 2 3

Total Service Area (including external landscaping & Parking), Sqm

16.00 Hectare (159045 Sqm)

Gross service area for facility management

Total Parking Area, Sqm 4.20 Hectare (42076 Sqm)

Total External Landscaping Area 6.10 Hectare (60792 Sqm)

Total Boundary Area of Mantralaya Mahanadi-Bhawan, Sqm

3.90 Hectare (38850 Sqm) Mantralaya Bounday wall area

Total Pardi Area of Mantralaya Mahanadi-Bhawan, Sqm

3.70 Hectare (36800 Sqm)

Mantralaya Screen wall area

Total Building Area of Mantralaya Mahanadi-Bhawan, Sqm


Mantralaya Building area

Total Plinth-Area of Mantralaya Mahanadi-Bhawan, Sqm


Mantralaya Plinth area (excluding courtyard, Ramp & Stair)

Total Built-up Area of Mantralaya Mahanadi Bhawan, Sqm

68000.00 All floor, Ramp, Stair & Santry Morcha

Carpet Area, Sqm 40000.00 Lowest Area (All Ground Floor), Sqm 15823.00 All block Highest Area (All Top floor), Sqm 2755.00 3 block

Average Area of each floor, Sqm 14259.00 All block No. of floors 45

Total Nos. of cabin/Rooms 473 For CM to Staff

Total Nos. of Toilet 153 Total Nos. of officers 157 OSD/US to CM level Total nos. of staff 2289 Peon to PA/PS level

Total nos. of Visitors (assumed) 1000 Total landscaping Area, sqm 13100.00

Club house Area , Sqm 3429.00 Women Common Room + Creche+ Café+Library+Record

Conference/meetings area, Sqm 1043.00 Common Area (Lobbies), Sqm 10483.00

Road (Plinth protection/paved area) 2.5 in km

Width of road (Plinth protection / paved area) 10 in meter

No. of Blocks 10 Ministry, Secretary, Section, Anci-A&B + 5 Lobbies

No. of Wings 5 Ministry, Secretary, Section, Anci-A&B

No. of Stair case 16


5

No. of Ramp 3

Conference/meeting Ministry block 3 CM meeting room, Sqm 118 Cabinet Hall, sqm 158 Including Pantry Meeting room, sqm 74 Subcommittee room, sqm 128 Including Pantry

Press conference, Sqm 62 Including Pantry Secretary block 3 Conference/meeting room, Sqm 503 Including Pantry Total 1043 Swimming Pool N.A STP N.A

WTP (Ro Plant) 4

Transformers 4 (1250 KVA, 1600 KVA, 2000x2 KVA, 33/4 KVA) indore type.

DG 5 (1010 KVA each)

chillers/HVAC 4 (325 TR each) Cooling Towers 4 (1300 USGPM) AHU detail 71 1612.81 TR.

FCU/ DFU 4/26 FCU- 4, DFU- 26. Pumps/VFD detail UPS /Inverter 26/8 UPS- 26, Inverter- 8.

Fire panel deatil 3 Secretary, Section, Ancillary-A.

Smoke detector heat detector fire alarm and sprinkle detection system

SD- 2800 HD- 50 sprinklar - 9200

ALL BLOCK

Boom Barrier /parking management system Yes Under planning

Basement vantilation system - PA and music system Yes Under planning

Total electrical Panel detail Rating and size and feeder detail

Main LT panel-04 5008 KVA

APFCR panel- 04 2600 KVAR Lighting Panel- 08 620.2 KVA Power Panel- 10 4042.7 KVA

AHU Panel- 08 735.2 KVA Utility Panel- 01 367.6 KVA

Total= 31 13373.7 KVA

Total lighting detail (Nos of CFL/Tubelight/fixture ) load

Minister 758.1 KVA Secretary 918.8 KVA Section 1401.2 KVA

Ancillary (A+B) 528.3 KVA

Total 3606.4 KVA


6

Staircase pressurisation system fan detail

Section 5

Secretary 3 Minister 2 Total 10

Utlility Rooms - LT panel, DG/Transformer rooms, etc,… (Sqm)

Ancillary Block "A" Ground Floor

Control/BMS room, Sqm 163.00 1 (Ancillary "A" Ground floor)

No. of floors 45 Total No. of Lifts 12 Total Nos of service lifts -

Total No. of Escalators - Type of flooring in common area Kota, Granite CLUB HOUSE / Cafeteria/common area details

Women Common Room, Sqm (Flooring Kota stone)

42.00

Creche, Sqm (Flooring Kota stone) 154.00 Including Pantry

General Cafeteria, Area in Sqm (Flooring Kota stone)

636.00 Including Kitchen

Officers Cafeteria, Area in Sqm (Flooring Granite)

165.00 Including Kitchen

Exhibition area in Sqm 567.00

Fitness center Sqm (Flooring Kota stone) 311.00

Library, Sqm (Flooring Kota stone) 727.00

Record + Vault room, Sqm (Flooring Kota stone) 827.00

Total, Sqm 3429.00 Electircal Load Equipment Capacity in kW Quantity

Transformer detail make and capacity 1600 KVA -01 1250 KVA - 01 2000 KVA - 02

4

HT panel detail HT Breaker panel of - 7 Segment (7 VC Breakers)

1

LT Panel Detail

(1) Main LT Panel 4

(2) APFCR Panel 600 KVAR.

2

(3) APFCR Panel 700 KVAR.

2

(4) Sychronising Panel 1

HT and LT breaker deatil (VCB,ACB,MCCB) HT Breaker 7 LT ACB 16

Capacitor bank detail N.A


7

UPS /Inverter detail UPS- 26.

10 KVA-3, 15 KVA-01, 20KVA- 08 , 30 KVA, 06, 50 KVA-08.

Inverter- 8.

CCTV detail

PTZ Camera 40 streamer for camera 40

DVM camera server 6 DVM database server 1 Total 87

Access control system Yes Under Planning Lift load 206 KW 12 escalators detail N.A

Pumps N.A Borewell pump N.A Transfer pumps N.A

SSTP pumps N.A Common area lighting N.A Street lighting 10 KW

Basement lighting 5 KW Club House lighting N.A Club House AC N.A

Club House - Steam & Sauna N.A Misc load 6 KW diesel storage tanks 1000 Ltr in built 5

Gas bank detail Yes Insurance Particulars Total cost Quantity Project cost (Includig labour) Civil cost of the project 1,215,950,276.00 HVAC and airconditioning cost 326,470,613.00 Electrical cost of the project 208,765,220.00

Plumbing & Firfighting cost of the project 145,407,785.00

Elevator/escaltor 47,213,250.00 Total Rs. 1,943,807,144.00 Additional Particulars

Painting required for common area annually, Sqm 150000.00

Garbage Disposal area in Sqm 125.00

Electrical - Mechanical Stores area in Sqm 156.00 Pest Control area in Sqm 15.00

STP Operations including manpower and AMC N.A

WTP Operations including manpower and AMC N.A

WTP chemicals N.A


8

Gardening area in Sqm 65.00

Housekeeping material.chemicals/ consumables area in Sqm

436.00

Diesel cost - 1000 litres / month N.A

AMC costs N.A DG N.A Lifts N.A Furniture cost in stores Property Management Office Furniture Rate in Rs./ Sq.ft 485.00

Electricity Cost Rs./ Month 2500000.00 Telephone Cost Rs./ Month 1000000.00 Approx. Govt. Regulations

Fire NOC Pollution control board N.A

Appendix D1 to D15 of RFP to be appended here

Schedule of Services


9

APPENDIX- D1 Inventory of Inventory of Civil Item of State Secretaries Block- NRDA Raipur project Inventory of Civil Item of State Secretaries Block- NRDA Raipur project

Sr. No.

Items Unit Quantity Make

Cladding

1 Granite Cladding Sqm 300 Natural Stone

2 Ceramic Tile Cladding Sqm 11,365 Johnson

Flooring

1 Granite (including Skirting ) Sqm 14045 Natural Stone

2 Marble (including Skirting ) Italian Sqm 837 Natural Stone

3 Vitrified Tiles Sqm 17675 Johnson

4 Kota Stone Sqm 32150 Natural Stone

False Ceiling

1 600x600mm tile, Aluminium Sqm N.A.

2 150mm Strip, Aluminium Sqm 4561

3 Gypsum Board Sqm 40053 LAFARGE (LAGYP) Aluminium/Glazing Work

1 Window , ventilators etc. Kg 23450 JINDAL

2 Sructural Glazing Sqm 2235

3 Window Glazing Sqm 3564

4 Spider Glazing Sqm N.A.

5 Frameless Door Sqm 220

6 Railling with Glass Sqm N.A.

7 ACP (Façade) Sqm 100

8 Urinal Partition nos. 190

9 Rest Room Partition nos. N.A.

10 Mirror nos. 525 [600Ø(470)+ 900Ø (55)]

Saint Gobain

11 Painting Sqm 228750 Asian

12 SS Cladding Sqm N.A.

13 Fully Glazed Fire rated dooor with all necessary hardware

Sqm 878 Signum

14 Window handle with lock-iron mongrey for Aluminium works

nos. 3600

15 Mortice Lock - Iron Mongrey for Aluminium Works

nos. 1121 Dorma

16 Friction Stay Pair N.A.

17 Expension Joint Sqm 293 Silflex

18 SS Railing Kg 21900 Jindal

19 Metalic Roofing Dome Sqm N.A.


10

APPENDIX- D2 Inventory For Electrical Sr. no.

Equipment Description Capacity/Size Make Quantity UNIT

SSB Total

1 33/0.415KV indoor cast resin dry type transformer with off load tap changer.

2000 KVA KIRLOSKAR 2 2 Nos

1600 KVA 1 3 1250 KVA 1 3 1000 KVA 2

5 HT PANEL WITH 7 VCB 33 KV , 630 AMP( 2 INCOMING, 4 OUT GOING & 1 FOR COUPLING)

33 KV, 630 AMPS KIRLOSKAR 1 1 SET

Indoor type SF6 / VCB panel of 33KV 5 breaker panel with one incoming breaker of 200A and outgoing breaker 4 nos of 40A

ABB 1

Indoor type SF6 / VCB panel of 33KV 9 breaker panel with two incoming breaker of 300A and outgoing breaker 3 nos of 120A & 3 nos of 50A and 1 buscoupler breaker of 150A. MAIN SUB STATION (UTILITY BLOCK)

1

0 Indoor type SF6 / VCB panel of 33KV 3

breaker panel with one incoming isolator of 120A and outgoing breaker 2 nos of 120A MAIN SUB STATION (UTILITY BLOCK)

2


breaker panel with one incoming isolator of 50A and outgoing breaker 3 nos of 25A.( MAIN SUB STATION (UTILITY BLOCK)

1


breaker panel with two incoming breakers of 25A and outgoing breaker 1 nos of 25A - AMENITIES BLOCK

1

Indoor type SF6 / VCB of 33KV breaker standalone breaker of 25A as per specifications including all labour, alignment on foundation, connecting metering cubicle, connecting all loose parts as supplied from factory, etc complete - MAIN SUBSTATION (UTILITY BLOCK)

1

6 D.G. SET 1010 KVA JACKSON 5 12 Nos 7 0 a ELEVATORS 0 Elevator with Machine room: Number of Stops-

six, Travel- 21.9 mtr (approx)

OTIS 2 Nos


11

Sr. no.


SSB Total

i) Number of Stops- five Travel- 17.4 mtr (approx)/ 18.7 (approx)

Thyssen Krupp / OTIS

4 Nos

ii) Number of Stops- four Travel- 13.5 mtr (approx)

Thyssen Krupp 3 Nos

b iii) Elevator without Machine room: Number of Stops-

six Travel- 21.9 mtr (approx)

Thyssen Krupp 3 Nos

7 a i) Arrow Engineers-Mumbai

1 Nos

b Main L.T. panel 1- From Tfr-1 do 1 Nos c Main L.T. panel 2- From Tfr-2 do 1 Nos d Main L.T. panel 3- From Tfr-3 do 1 Nos e Main L.T. panel 4- From Tfr-4 do 1 Nos Utility panels - do 1 Nos i) AHU Panel 1 for secretariat block do 1 Nos ii) AHU Panel 2 for secretariat block do 1 Nos iii) AHU Panel 1 for Minister block do 1 Nos iv) AHU Panel 2 for Minister block do 1 Nos v) AHU Panel -1 for Section Block do 1 Nos vi) AHU Panel -2 for Section Block do 1 Nos vii) AHU Panel 1 for Ancillary block A do 1 Nos f viii) AHU Panel 2 for Ancillary block B do 2 Nos g APFCR panel for 700 KVAR, 16 stage - as

per drawing do 2 Nos

h APFCR panel for 600 KVAR, 12 stage - as per drawing

do 2 Nos

i Lighting panel - 1 & 2 for secretariat block do 1 No j Lighting panel - 1 for Minister block do 1 No k Lighting panel - 2 for Minister block do 1 No l Lighting panel - 1 for Ancillary block do 1 No m Lighting panel - 2 for Ancillary block do 1 No n Lighting panel - 1 for Section block do 1 No o Lighting panel - 2 for Section block do 2 Nos p Raw power panel -1 & 2 for secretariat block do 1 No q Raw power panel - 1 for Minister block do 1 No r Raw power panel - 2 for Minister block do 1 No s Raw power panel -1 for Ancillary block do 1 No t Raw power panel - 2 for Ancillary block do 1 No u Raw power panel -1A for Section block do 1 No


12

Sr. no.


SSB Total

v Raw power panel - 1B for Section block do 1 No

w Raw power panel -2A for Section block do 1 No x Raw power panel -2B for Section block do 24 Nos y UPS Panel for All Buildings do 8 Nos 8 Inverter Panel for All Buildings a DISTRIBUTION BOARDS - FACTORY

FABRICATED. Multi 9

(Schneider) 8 Nos

b 16 way pr distribution board with 63 A FPMCB as incomer and per phase 1 Nos 40 A DPELCB,100ma and 12 Nos 6-32A SPMCB. (FOR LDB)

do 56 Nos

c 12 way per phase isolation type double door distribution board with 40 A FPMCB as incomer and per phase 1 Nos 25 A DPELCB,100ma and 8 Nos 6-32A SPMCB. (FOR LDB)

do 43 Nos

d 16 way per phase isolation type double door distribution board with 63 A FPMCB as incomer and per phase 1 Nos 40 A DPELCB,100ma and 12 Nos 6-32A SPMCB. (FOR PDB)

do 34 Nos

e S 12 way per phase isolation type double door distribution board with 40 A FPMCB as incomer and per phase 1 Nos 25 A DPELCB,100ma and 8 Nos 6-32A SPMCB. (FOR PDB)

do 29 Nos

f 16 way per phase isolation type double door distribution board with 63 A FPMCB as incomer and per phase 1 Nos 40 A DPELCB,100ma and 12 Nos 6-32A SPMCB. (FOR UPSDB)

do 19 Nos

g 12 way per phase isolation type double door distribution board with 40 A FPMCB as incomer and per phase 1 Nos 25 A DPELCB,100ma and 8 Nos 6-32A SPMCB. (FOR UPSDB)

do 1 Nos

h 8 way per phase isolation type double door distribution board with 25 A FPMCB as incomer and per phase 1 Nos 25 A DPELCB,100ma and 6 Nos 6-32A SPMCB. (FOR UPSDB)

do 34 Nos

i 8 way per phase isolation type double door distribution board with 25 A FPMCB as incomer and per phase 1 Nos 20 A DPELCB,100ma and 6 Nos 6-32A SPMCB. (FOR ELDB)

do 88 Nos

j 20 A 1 phase PVC type industrial plug sockets of IP 65 category with DP MCB complete. (wiring for the same shall be paid in Rmt)

do 25 Nos


13

Sr. no.


SSB Total

k 32 A 3 phase PVC type industrial plug sockets of IP 65 category with FP MCB complete. (wiring for the same shall be paid in Rmt)

do 25 Nos

k 63 A 3 phase PVC type industrial plug sockets of IP 65 category with FP MCB complete. (wiring for the same shall be paid in Rmt)

20 Nos

l 125A FPMCCB, 25 KA with static releases with M.S. enclosure and terminal boxes complete for UPS input and output.

do 16 Nos

m 100A FPMCCB, 25 KA with static releases with enclosure and terminal boxes complete for UPS input and output.

do 20 Nos

n 63A FPMCCB, 16 KA with static releases with enclosure and terminal boxes complete for UPS input and output.

do 20 Nos

9.a 40A FPMCB, 10 KA with M.S. enclosure complete for UPS input and output.

10 KVA Eaton 3 Nos

b 3 phase UPS with o/p p.f. of 0.9 as per specification of tender

15 KVA do 1 Nos

c do as above but 15 KVA 20 KVA do 8 Nos d -do- as above but 20 KVA 40 KVA do 6 Nos e -do- as above but 40 KVA 50 kvA do 8 Nos 10.a -do- as above but 50 KVA 7.5 KVA Sukam 1 No b three phase input and three phase output

digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type - 7.5 KVA

10 KVA Sukam 1 No

c three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type -10 KVA

15 KVA Sukam 2 Nos

d three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type -15 KVA

20 KVA Sukam 4 Nos

11.a three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type -20 KVA

Nimbus 6 Nos

Lightning protection system with Early Streamer Emmision (ESE), technology, having a coverage range up to 58 mtr.(Level 1) ………. as per specifications. Nimbus CPT-2

b do 6 Nos Lightening Discharging Counter to verify the

lighting discharge occurrence.

c Ashlok 12 Nos


14

Sr. no.


SSB Total

12 Earthing for maintenance free, 2mtr long and 80 mm dia, operation for a period of 7 yrs maintenance free earthing system

127 nos

13 Earthihng system with ,3 mtr depth earth pit, with copper plate of 600X600 mm & 450X450 mm for entire buiding

Pranali 12000 Rmt

14 OFC laying In 32 mm dia 2mm thk Pvc conduit

Molex 400000 Mtr

15 Cat -6 Wire in pre laid conduit Race way For Data & voice

3727 Nos

16 Concealed mounted bottom poenable type 2 x 36 W CFL Fixture- Philips Make Cat No. FBS 580/236 CNN D6 MM EBS of approved equivalent

528 Nos

17 Surface mounted 1 x 13W CFL fixture- Artlite Cat No. RL 2809 or approved equivalent

24 Nos

18 -do - as above but 2 x 36 w suspended CFL fixtures Artlite Cat No. RL 8000 or approved equivalent

686 Nos

19 -do - as above but 2 x 26 w Concealed type CFL fixtures Artlite Cat No. RL 1804 or approved equivalent

490 Nos


48 Nos

21 -do - as above but 2 x 24W + 2 x QR 111 Concealed type CFL fixtures Artlite Cat No. RL2603 or approved equivalent

263 Nos

22 -do - as above but 2 x 28W T5 lamp Concealed type CFL fixtures Artlite Cat No. RL2565 or approved equivalent

3410 Rmtr.

23 -do - continuous LED cove lights with transformer etc complete of colour shade approved by architect- Artlite RL 11351 / T or approved equivalent

103 Nos

24 do suspended light fixtures with QR CB 51 lamps - Artlite RL 3256 or approved equivalent.

678 Nos


173 Nos

26 Surface mounted type 1 x 36 w FTL box type fixture Philips make cat No. TKC 203 / 136 HF or approved equivalent

110 Nos


327 Nos

28 Surface mounted type 2 x 36 w FTL acrylic cover fixture Philips make cat No. 097 / 236 HF or approved equivalent

20 Nos


15

Sr. no.


SSB Total

29 Surface mounted type Par 20 lamp type up & down light fixture artlite cat no RL 4116 or approved equivalent

1444 Nos

30 Concealed mounted 2 x 36 W Concealed type CFL fixture Atrlite RL 2562 or approved equivalent

800 Nos

31 1200 mm dia ceiling fan - Grompton high speed with double ball bearing &white colour ( Supply including )

125 NOS

32 300 mm dia exhaust fan of PVC body with louvers. Usha make - Lexus model or approved equivalent ( Supply including )

3 Nos

33 ITC of pole mounted fixtures 70W sodium vapor lamp IP65 including pole Philips cat No Adonis CPP725 or approved equivalent

206 Nos

34 ITC of Outdoor Ground burial outdoor type 12V/50W Artlite cat no. RL 4206 or approved equivalent

291 Nos

35 ITC of Brick lights 1 x 10W Artlite cat no. RL 4121 or approved equivalent

1 No

ITC of LED lamp type aviation light with mounting accessories of 3 mtr max height and control box having auto timer with day light sensor and flickering circuit meeting parameters of AAI with necessary whether proof housing for control gears etc. - Artlite cat No. SPRL 0345


16

Electrical Item In PHILIPS MAKE S.NO. Type of fitting Qty

Installed Spare Needed

1 2 3 4

1 GOBO 10 CDMT- 150W LAMPS

10 150W ELECTRONIC BALLAST

2 MWF 331/250 FLOOD 8 250W HPI-T LAMP

8 250W HPIT BALLAST

8 IGNITOR s151/02

8 CAPACITOR 33 MFD

3 DECO FLOOD 150W 40 CDMT- 150W LAMPS

40 150W ELECTRO- MAGNETIC BALLAST FOR DECO- FLOOD

40 IGNITOR s151/02

40 CAPACITOR 20 MFD

4 VAYA FLOOD- COLOR LED 12 COMPLETE FITTING

TOUCH PLAYER 3 COMPLETE SET

5 SGP 369/70W MHN-TD 10 MHN- TD 70W LAMP

10 70 W MH BALLAST

10 IGNITOR SN/02

6 LED COLOR BLAST 90 COMPLETE FITTING

PHILIPS I PLAYER 1 COMPLETE SET

RS485 SPLITTER 1 COMPLETE SET

7 LED FOCUS LIGHT 6 PHILIPS MAKE

8 GLAW SIGN BOARD & LED BOARD 2 PHILIPS MAKE


17

Inventory For Electrical

Sl. No. Equipment Description Capacity/Size Make Quantity

UNIT SSB

1 33/0.415KV indoor cast resin dry type transformer with off load tap changer.

2000 KVA KIRLOSKAR 2 Nos

1600 KVA 1

1250 KVA 1

1000 KVA 0

2 HT BREAKERS

2.1 HT PANEL WITH 7 VCB 33 KV , 630 AMP( 2 INCOMING, 4 OUT GOING & 1 FOR COUPLING)

33 KV, 630 AMPS KIRLOSKAR 1 SET

2.2 Indoor type SF6 / VCB panel of 33KV 5 breaker panel with one incoming breaker of 200A and outgoing breaker 4 nos of 40A

ABB 0 Nos

2.3 Indoor type SF6 / VCB panel of 33KV 9 breaker panel with two incoming breaker of 300A and outgoing breaker 3 nos of 120A & 3 nos of 50A and 1 buscoupler breaker of 150A. MAIN SUB STATION (UTILITY BLOCK)

0 Nos

2.4 Indoor type SF6 / VCB panel of 33KV 3 breaker panel with one incoming isolator of 120A and outgoing breaker 2 nos of 120A MAIN SUB STATION (UTILITY BLOCK)

0 Nos

2.5 Indoor type SF6 / VCB panel of 33KV 4 breaker panel with one incoming isolator of 50A and outgoing breaker 3 nos of 25A.( MAIN SUB STATION (UTILITY BLOCK)

0 Nos

2.6 Indoor type SF6 / VCB panel of 33KV 3 breaker panel with two incoming breakers of 25A and outgoing breaker 1 nos of 25A - AMENITIES BLOCK

0 Nos

2.7 Indoor type SF6 / VCB of 33KV breaker standalone breaker of 25A as per specifications including all labour, alignment on foundation, connecting metering cubicle, connecting all loose parts as supplied from factory, etc complete - MAIN SUBSTATION (UTILITY BLOCK)

0 Nos

3 D.G. SET 1010 KVA JACKSON 5 Nos

4 ELEVATORS

b Elevator with Machine room: Number of Stops- six, Travel- 21.9 mtr (approx)

Thyssen Krupp

2 Nos

Number of Stops- five Travel- 17.4 mtr (approx)/ 18.7 (approx)

Thyssen Krupp / OTIS

4 Nos

Number of Stops- four Travel- 13.5 mtr (approx)

Thyssen Krupp

3 Nos

5 Elevator without Machine room: Number of Stops- six Travel- 21.9 mtr (approx)

Thyssen Krupp

3 Nos


18


UNIT SSB

Arrow Engineers-Mumbai

1 Nos

6 LT PANELS

6.1 Main L.T. panel 1- From Tfr-1 ARROW Engineers/ Lotus

1 Nos

6.2 Main L.T. panel 2- From Tfr-2 do 1 Nos



6.5 Utility panels - do 1 Nos

6.6 i) AHU Panel 1 for secretariat block do 9 Nos 6.7 APFCR panel for 700 KVAR, 16 stage - as per drawing do 2 Nos 6.8 APFCR panel for 600 KVAR, 12 stage - as per drawing 600 KVAR do 2 Nos 6.9 APFCR panel for 450 KVAR, 8 stage - 1 for Amenities block

& 1 for Utility block 450 KVAR Lotus 0

6.10 Lighting panel - 1 & 2 for secretariat block do 1 No 6.11 Lighting panel - do 7 No

6.12 Raw power panel - do 10 No

6.13 UPS Panel for All Buildings do 24 Nos

6.14 Inverter Panel for All Buildings 8 Nos

6.15 Emergency panel 0 Nos

6.16 Typical FSP Panel for Exterrnal Lighting 0 Nos 6.17 FSP panel for External Lighting Lotus 0 Nos

6.18 Emergency panel Lotus 0 Nos

7 DISTRIBUTION BOARDS - FACTORY FABRICATED. Multi 9 (Schneider)

Nos

7.1 16 way per phase distribution board with 63 A FPMCB as incomer and per phase 1 Nos 40 A DPELCB,100ma and 12 Nos 6-32A SPMCB. (FOR LDB)

do 8 Nos

7.2 12 way per phase isolation type double door distribution board with 40 A FPMCB as incomer and per phase 1 Nos 25 A DPELCB,100ma and 8 Nos 6-32A SPMCB. (FOR LDB)

do 56 Nos

7.3 16 way per phase isolation type double door distribution board with 63 A FPMCB as incomer and per phase 1 Nos 40 A DPELCB,100ma and 12 Nos 6-32A SPMCB. (FOR PDB)

do 43 Nos

7.4 12 way per phase isolation type double door distribution board with 40 A FPMCB as incomer and per phase 1 Nos 25 A DPELCB,100ma and 8 Nos 6-32A SPMCB. (FOR PDB)

do 34 Nos

7.5 16 way per phase isolation type double door distribution board with 63 A FPMCB as incomer and per phase 1 Nos 40 A DPELCB,100ma and 12 Nos 6-32A SPMCB. (FOR UPSDB)

do 29 Nos


do 19 Nos


19


UNIT SSB


do 1 Nos

7.8 8 way per phase isolation type double door distribution board with 25 A FPMCB as incomer and per phase 1 Nos 20 A DPELCB,100ma and 6 Nos 6-32A SPMCB. (FOR ELDB)

do 34 Nos

7.9 20 A 1 phase PVC type industrial plug sockets of IP 65 category with DP MCB complete. (wiring for the same shall be paid in Rmt)

do 88 Nos

7.10 32 A 3 phase PVC type industrial plug sockets of IP 65 category with FP MCB complete. (wiring for the same shall be paid in Rmt)

do 25 Nos

7.11 63 A 3 phase PVC type industrial plug sockets of IP 65 category with FP MCB complete. (wiring for the same shall be paid in Rmt)

25 Nos

7.12 150A FPMCCB, 25 KA with static releases with M.S. enclosure and terminal boxes complete for Bank 1 & Bank 2

0 Nos

7.13 125A FPMCCB, 25 KA with static releases with M.S. enclosure and terminal boxes complete for UPS input and output.

do 20 Nos

7.14 100A FPMCCB, 25 KA with static releases with enclosure and terminal boxes complete for UPS input and output.

do 16 Nos

7.15 63A FPMCCB, 16 KA with static releases with enclosure and terminal boxes complete for UPS input and output.

do 20 Nos

7.16 40A FPMCB, 10 KA with M.S. enclosure complete for UPS input and output.

do 20 Nos

8 3 phase UPS with o/p p.f. of 0.9 as per specification of tender

8.1 do as above but 10KVA 10 KVA Eaton 3 Nos

8.2 do as above but 15 KVA 15 KVA Eaton 1 Nos

8.3 -do- as above but 20 KVA 20 KVA Eaton 8 Nos

8.4 do as above but 25 KVA 25 KVA Nos

8.5 do as above but 30 KVA 30 KVA Nos



9 INVERTERs Nos

9.1 Three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type - 7.5 KVA

7.5 KVA Sukam 1 Nos

9.2 Three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type -10 KVA

10 KVA Sukam 1 Nos

9.3 Three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type -15 KVA

15 KVA Sukam 2 Nos

9.4 three phase input and three phase output digital inverter with battery back up of 2 hours with necessary chargers. The batteries are of maintenance free type -20 KVA

20 KVA Sukam 4 Nos


20


UNIT SSB

9.5 Single phase input and single phase output digital inverter with battery back up of 2 hours. The batteries shall be maintenance free type - 7.5 KVA

7.5 KVA do 0 Nos

10 Lightning protection system with Early Streamer Emmision (ESE), technology, having a coverage range up to 58 mtr.(Level 1) ………. as per specifications. Nimbus CPT-2

Nimbus/ Indellec

6 Nos

11 Lightening Discharging Counter to verify the lighting discharge occurrence.

do 6 Nos

12 Earthing system

12.1 Earthing for maintenance free, 2mtr long and 80 mm dia, operation for a period of 7 yrs maintenance free earthing system

Ashlok 12 Nos

12.2 Earthihng system with , 3 mtr depth earth pit, with copper plate of 600X 600 mm & 450X 450 mm for entire buiding

127 nos

13 OFC laying In 32 mm dia 2mm thk Pvc conduit Pranali 12000 Rmt

14 Cat -6 Wire in pre laid conduit Race way For Data & voice Molex 400000 Mtr 15 Concealed mounted bottom poenable type 2 x 36 W CFL

Fixture- Philips Make Cat No. FBS 580/236 CNN D6 MM EBS of approved equivalent

3727 Nos


528 Nos

17 -do - as above but 2 x 36 w suspended CFL fixtures Artlite Cat No. RL 8000 or approved equivalent

24 Nos


686 Nos


490 Nos

20 -do- as above but 1 x 13W concealed type CFL fixture - Artlite RL2550 or approved equivalent

0

21 -do - as above but 2 x 24W + 2 x QR 111 Concealed type CFL fixtures Artlite Cat No. RL 2603 or approved equivalent

48 Nos

22 -do - as above but 2 x 28W T5 lamp Concealed type CFL fixtures Artlite Cat No. RL 2565 or approved equivalent

263 Nos

23 -do- as above but track light system with necessary connectors, flexible track, 1 nos par 30 lamp spot light fixtures per 1 meter complete - Artlite cat nos RL - 0301 for 0302 for track light and accessories and RL - 0247 for fixture or approved equivalent

0 Nos

24 -do- as above but track light system with necessary connectors, flexible track, 1 nos par 30 lamp spot light fixtures per 1 meter complete - Artlite cat nos RL - 0301 for 0302 for track light and accessories and RL - 0239 for fixture or approved equivalent

0 Nos

25 -do - continuous LED cove lights with transformer etc complete of colour shade approved by architect- Artlite RL 11351 / T or approved equivalent

3410 Rmtr.

26 do suspended light fixtures with QR CB 51 lamps - Artlite RL 3256 or approved equivalent.

103 Nos


21


UNIT SSB

27 False ceiling mounted bottom openable type 2 x 36 W CFL flameproof fixture - Sudhir / FCI / Explosion proof makes

0


678 Nos

29 Surface mounted 150W metal halide integral type fixture at 5 mtr height - Artlite cat no RL 2801 or approved equivalent

0 Nos


173 Nos


110 Nos

32 Surface mounted type 2 x 36 w FTL acrylic cover fixture Philips make cat No. 097 / 236 HF or approved equivalent

327 Nos

33 Surface mounted type 1 x 9W CFL bulkhead fixtures Philips FXC101/9W or approved equivalent

0 Nos

34 Surface mounted type Par 20 lamp type up & down light fixture artlite cat no RL 4116 or approved equivalent

20 Nos

35 Concealed mounted 2 x 36 W Concealed type CFL fixture Atrlite RL 2562 or approved equivalent

1444 Nos

36 1200 mm dia ceiling fan - Crompton high speed with double ball bearing &white colour ( Supply including )

800 Nos

37 300 mm dia exhaust fan of PVC body with louvers. Usha make - Lexus model or approved equivalent ( Supply including )

125 NOS

38 SITC of pole mounted fixtures 70W sodium vapor lamp IP65 including pole Philips cat No Adonis CPP725 or approved equivalent

3 Nos

39 SITC of Outdoor Ground burial outdoor type 12V/50W Artlite cat no. RL 4206 or approved equivalent

206 Nos

40 SITC of Brick lights 1 x 10W Artlite cat no. RL 4121 or approved equivalent

291 Nos

41 SITC of Brick lights 1 x 18W Artlite cat no. RL 4120 or approved equivalent

0 Nos

42 SITC of LED lamp type aviation light with mounting accessories of 3 mtr max height and control box having auto timer with day light sensor and flickering circuit meeting parameters of AAI with necessary whether proof housing for control gears etc. - Artlite cat No. SPRL 0345

1 No

43 Bollards 15W CFL Artlite cat no. RL 4303 or approved equivalent

Nos

44 Outdoor Spot light 70W Metal halide of IP65 Artlite cat no. RL 4230 .

Nos

45 Outdoor Spot light 150W Metal halide of IP65 Artlite cat no. RL 4240.

Nos

46 Ground burial up lighter for Drive-over 70W metal halide lamp Artlite cat no.RL 4002.

Nos

47 1 x QT12 lamp Ground burials for Drive-over Artlite Cat No. RL 4009.

Nos

48 250W metal halide high bay fixture of IP 54 category with glass cover and integral ballast. - Philips HPK225 HPI 250 NB.

Nos


22


UNIT SSB

49 12v/50W gun metal / ss body type water body lights - Philips NHG 10.

0 Nos

50 LED lamp type aviation light with mounting accessories of 3 mtr max height and control box having auto timer with day light sensor and flickering circuit meeting parameters of AAI with necessary whether proof housing for control gears etc. - Artl

Nos

51 GI / Al floor raceway vertical access junction box of 300 x 200 x 50 mm equivalent to MK make - Cat no EVB 250/2

Nos

52 GI / Al floor raceway outlet junction box of 250 x 250 x 60 mm approved equivalent to MK make - Cat no ESB 250/3/1

Nos

53 GI / Al floor raceway cross over junction box of 250 x 250 x 60 mm approved equivalent to MK make - Cat no EJB 250/3

Nos

54 Point wiring with 1.5 sq mm x 2 + 1.0 sq mm x 1 nos wires from modular switches to light outlet in concealed manner including ZHFR grade wires with LHSFT grade ISI PVC conduit of 25 mm diameter 1.6-2.0 mm thickness. Mains of 2.5 sq mm x 3 nos wires from D.B. to switchboard.

54.1 One light point controlled by one single way 6 A switch. 2600 Nos

54.2 -do- as 7.1 but looped from above. 4200 Nos

54.3 -do- as item 7.1 but two way point to be done with 2 nos 6A two way switches

40 Nos


54.5 One light point controlled by MCB directly. Cost of MCB shall be a part of the distribution board cost

200 Nos


54.7 One fan outlet point controlled by one 6 A switch and step type electronic regulator.

239 Nos

54.8 One 6 A x 5 pin 230 Volt socket outlet point controlled by one 6 A switch located on switch board.

1450 Nos

54.9 6 A x 230 Volt 5 pin socket outlet point controlled by 6 A switch at convenient location including box plate etc complete to be done with 2.5 sq mm ckt from D.B.

600 Nos

54.10 6 A x 230 Volt 5 pin socket outlet point controlled by 6 A switch at convenient location including box plate etc complete to be done with 1.5 sq mm ckt looped from main plug point or lighting SB.

3000 Nos

54.11 6 A x 230 Volt 5 pin socket outlet point controlled by 6 A switch with switch and socket at different locations including box plate etc complete to be done with 2.5 sq mm ckt from D.B.

125 Nos

54.12 3 nos 6 A x 230 Volt 5 pin socket outlet point controlled by 1 nos 10/16A switch at convenient location including box, plate complete to be done with 2.5 sq mm ckt from D.B. (Major qty of the same is for computer outlets and major wiring shall be

2000 Nos


23


UNIT SSB

done through raceways - cost of raceways not part of the point rate. Flexible steel reinforced PVC conduit shall be used for part of wiring in furniture)

54.13 -do- as above but looped from 7.12 with 1.5 sq mm wire ckt 4000 Nos 54.14 1 nos 6/16A x 230 Volt 5 pin socket outlet point with 16 A

switch with box and plate complete to be done with 4.0 sq mm wire ckt from D.B. complete.

250 Nos

54.15 1 nos 6/16A x 230 Volt 5 pin socket outlet point with 16 A switch with box and plate complete to be done with 2.5 sq mm wire ckt from D.B. complete.

250 Nos

54.16 -do- as above but looped with 2.5 sq mm ckt from sockets in item 7.14 and 7.15

250 Nos

54.17 bell point with bell switch and buzzer at different location to be done with 1.5 sq mm ckt looped from lighting SB.

250 Nos

54.18 25 mm dia. rigid LHSFT category ISI marked PVC conduit of 2.0 mm wall thickness with all accessories complete with GI fish wire.

5000 Nos

54.19 MAINS : - for three phase sockets / D.B. to D.B. / panel to UPS and UPS to UPS DB

0 Nos

54.20 2 x 2.5 sq mm + 1 x 2.5 sq mm HFFR copper flexible wires in and including 25 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm

0 Nos

54.21 4 x 4 sq mm + 1 x 2.5 sq mm HFFR copper flexible wires in and including 25 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm

0 Nos

54.22 2 x 4 sq mm + 1 x 2.5 sq mm HFFR copper flexible wires in and including 25 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm

0 Nos

54.23 4 x 6 sq mm + 1 x 4 sq mm HFFR copper flexible wires in and including 32 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm

0 Nos


0 Nos


0 Nos

55 20 pair telephone tag block. 0 Nos





60 200 pair 0.5 mm dia jelly filled armored telephone cable 3500 rmt 61 100 pair 0.5 mm dia jelly filled armoured telephone cable 5000 rmt 62 50 pair 0.5 mm dia jelly filled armoured telephone cable 3000 rmt 63 20 pair 0.5 mm dia jelly filled armoured telephone cable 0 rmt 64 10 pair 0.5 mm dia jelly filled armoured telephone cable 0 rmt 65 5 pair 0.5 mm dia jelly filled armoured telephone cable 0 rmt 66 Cat 6 computer wire inprelaid conduit/ raceway for data and 250000 rmt


24


UNIT SSB

voice 67 RJ11 coaxial T.V. wire in prelaid conduit Bhansali 4000 rmt 68 RG6 coaxial T.V. wire in prelaid conduit Bhansali 0 rmt 69 1 sq mm x 4 core shielded wire in prelaid conduit 0 rmt 70 RJ 11 telephone jack type socket with box and plate

complete. 2400 Nos

71 RJ 45 computer jack (Avaya make) type socket with box and plate complete.

2400 Nos

72 Television coaxial type socket with box and plate complete. 0 Nos 73 GI / Al floor raceway of 100 x 38 mm of 1.6 mm thickness

MK UMDX 100/1/6 or approved equivalent MK 16500 rmt

74 GI / Al floor raceway vertical access junction box of 300 x 200 x 50 mm equivalent to MK make - Cat no EVB 250/2

MK 200 Nos

75 GI / Al floor raceway outlet junction box of 250 x 250 x 60 mm approved equivalent to MK make - Cat no ESB 250/3/1

MK 1800 Nos

76 GI / Al floor raceway cross over junction box of 250 x 250 x 60 mm approved equivalent to MK make - Cat no EJB 250/3

MK 400 Nos

77 Telephone instruments Analog / SLT Push button Telephones with DTMF / FSK Alpha Numeric Caller ID Facility (point 7 (c ) - kxts 500 of Panasonic or approved equivalent

2400 Nos

78 UPS as per specification of tender - 10 KVA 0 Nos 79 25 mm dia 1.6G M.S. conduit with ISI marking with all

accessories complete. Rmt

80 32 mm dia 2mm thick PVC conduit. AKG Rmt

81 100 mm dia 1.6 KG pressure PVC conduit. AKG Rmt

82 Floodlight NEOS 3 (IP-66) consisting of two parts made of painted, die cast Aluminium alloy. suitable 250W MH Lamp. FARIO pole with 360 Degree FARIO RING BRACKET:

Nos

83 10 mtr above ground, seamless conical tapering GI poles with two seamless conical tapering inclined GI bracket (1.5 mtr long at 9mtr with rear projection & 0.25 mtr long at 6mtr height without rear projection respectively) of approved shape & suitable for mounting of 250W & 150W fixtures with loop in loop out connector (bakelite connector of 15A) and twin connectors along with 2# MCB's for fixtures.

Nos

84 Note Luminaires specification to be read in conjunction with Item no. 12.7

85 7 mtr above ground, seamless conical tapering GI poles with single seamless conical tapering GI 1.5 mtr long bracket of approved shape & suitable for mounting of 150W fixture junction box with loop in loop out connector (bakelite connector of 15A) and MCB for fixture.

Nos

Note Luminaires specification to be read in conjunction with Item no. 12.7


25


UNIT SSB

86 4.5 mtr above ground, seamless straight GI poles with single seamless conical tapering inclined GI 0.25 mtr long bracket without rear projection of approved shape & suitable for mounting of 70W fixture. junction box with loop in loop out connector (bakelite connector of 15A) and MCB for fixture.

Nos

Note Luminaires specification to be read in conjunction with Item no. 12.7

87 Spiral earthing using 8SWG 'GI' wire for street light pole. 'GI' wire buried to a minimum depth 1.5m. With excavation, refilling and connecting GI wire to pole using GI bolt and nut complete

Nos

88 3 nos 1.5 sq mm Cu flexible FRLS wires in flexible conduit from junction box on poles to fixture

Rmt

Standard light fittings and lighting accessories including lamp.

89 SITC of pole mounted fixtures 250W sodium vapor lamp IP66 including control gear box with lamp, Philips cat No CGP431 C SON-T250W 240V 50Hz OR FG GR S or approved equivalent

Nos

90 SITC of pole mounted fixtures 150W sodium vapor lamp IP66 including control gear box with lamp , Philips cat No CGP431 C SON-T150W 240V 50Hz OR FG GR S or approved equivalent

Nos

91 SITC of pole mounted fixtures 70W sodium vapor lamp IP66 including control gear box with lamp, Philips cat No CGP431 C SON-T70W 240V 50Hz OR FG GR S or approved equivalent

Nos

92 SITC of LED Bollards 3W white colour Philips cat No. BCP 655 or approved equivalent

Nos

93 SITC of MR11 12v/35W Outdoor planter lights - Artlite cat no. RL 4216 or approved equivalent

Nos

94 SITC of Floor mounted 1 x3 W LED ROPE type Floor lights - Artlite cat no. RL NEO-NEON152 or approved equivalent

Nos

95 CABLES

95.1 400 sq mm x 3.5 C AYFY cable Polycab rmt 1370 Rmt.

95.2 300 sq mm x 3.5 C Polycab rmt 4065 Rmt.


95.4 185 sq mmx 3.5 C Polycab rmt 1370 Rmt.







95.11 25 sq mm x 4 C Polycab rmt 2200 Rmt.


26


UNIT SSB










95.21 2.5 sq mm x 4 C Polycab rmt 0 Rmt.



95.24 240 sq mm x 3 C 33 KV HT XLPE (E) cable Polycab rmt 1500 Rmt.


27

APPENDIX– D3 INVENTORY FOR LV SYSTEM CCTV SYSTEM

CAMERA VIDEO STREAMER CAMERA POWER SUPPLY 24 PORT SWITCH MAKE QTY UNIT MAKE QTY UNIT MAKE QTY UNIT MAKE QTY UNIT

MINISTER GROUND Honeywell 5 NOS AXIS 5 NOS LOCAL 5 NOS D-LINK 1 NOS FIRST Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS 0 SECOND Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS 0 THIRD Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS 0 FOURTH Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS 0 FIFTH Honeywell 4 NOS AXIS 4 NOS LOCAL 4 NOS 0 SECRETARY GROUND Honeywell 6 NOS AXIS 6 NOS LOCAL 6 NOS D-LINK 1 NOS FIRST Honeywell 4 NOS AXIS 4 NOS LOCAL 4 NOS 0 SECOND Honeywell 3 NOS AXIS 3 NOS LOCAL 3 NOS 0 THIRD Honeywell 5 NOS AXIS 5 NOS LOCAL 5 NOS 0 FOURTH Honeywell 4 NOS AXIS 4 NOS LOCAL 4 NOS 0 SECTION GROUND Honeywell 9 NOS AXIS 9 NOS LOCAL 9 NOS D-LINK 1 NOS FIRST Honeywell 9 NOS AXIS 9 NOS LOCAL 9 NOS 0 SECOND Honeywell 9 NOS AXIS 9 NOS LOCAL 9 NOS 0 THIRD Honeywell 9 NOS AXIS 9 NOS LOCAL 9 NOS 0 ANCILLARY A GROUND Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS D-LINK 1 NOS FIRST Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS 0 SECOND Honeywell 1 NOS AXIS 1 NOS LOCAL 1 NOS 0 ANCILLARY B GROUND Honeywell 2 NOS AXIS 2 NOS LOCAL 2 NOS D-LINK 1 NOS FIRST Honeywell 1 NOS AXIS 1 NOS LOCAL 1 NOS 0 SECOND Honeywell 1 NOS AXIS 1 NOS LOCAL 1 NOS 0 TOTAL NUMBER OF CAMERAS 84 NOS 84 NOS 84 NOS 5 NOS


28

DATA BASE SERVER (DVM) CAMERA SERVER (DVM) NETWORK ATTACHED STORAGE (NAS) MAKE QTY UNIT MAKE QTY UNIT MAKE QTY UNIT

MINISTER GROUND 0 0 0 FIRST 0 0 0 SECOND 0 0 0 THIRD 0 0 0 FOURTH 0 0 0 FIFTH 0 0 0 0 0 SECRETARY GROUND 0 0 0 FIRST 0 0 0 SECOND 0 0 0 THIRD 0 0 0 FOURTH 0 0 0 0 0 SECTION GROUND 0 0 0 FIRST 0 0 0 SECOND 0 0 0 THIRD 0 0 0 0 0 ANCILLARY A GROUND 0 0 0 FIRST 0 0 0 SECOND DELL 1 NOS DELL 6 Nos DELL 1 NOS ANCILLARY B GROUND 0 0 0 FIRST 0 0 0 SECOND 0 0 0 TOTAL NUMBER OF CAMERAS 1 NOS 6 NOS 1 NOS


29

APPENDIX– D4

SL. No LOCATION PARTICULARS Make MOTOR KW (Each)

QTY SSB Units TOTAL KW

PLANT ROOM Equipments

Capacity

1 CHILLERS - 325 TR ( 3# working + 1 Standby)

CHILLERS - 325 TR ( 3# working + 1 Standby) Carrier 300.00 4 Nos 1200.00

2 PRIMARY CHILLED WATER PUMPS ( 3# working + 1 Standby)

PRIMARY CHILLED WATER PUMPS ( 3# working + 1 Standby)

Armstrong 18.50 4 Nos 74.00

3 SECONDARY CHILLED WATER PUMPS ( 3# working + 1 Standby)

SECONDARY CHILLED WATER PUMPS ( 3# working + 1 Standby)


4 COOLING TOWERS ( 3# working + 1 Standby)

COOLING TOWERS ( 3# working + 1 Standby) Mihir 9.30 4 Nos 37.20

5 COOLING/CONDENSER WATER PUMPS ( 3# working + 1 Standby)

COOLING/CONDENSER WATER PUMPS ( 3# working + 1 Standby)


Plant Room PEC Unit (Direct Expansion Air Cooled) including all

accessories - For Control Room & Server Room : Slutz 4 Nos

plant Room Plate Heat Exchanger : Primary Side Brine O/I Temp-4.5°/11.5° C(955),Secondary Side Water O/I Temp - 6°/13° C(880), Primary Side Brine - 955 USGPM,Secondary Side Water - 880 USGPM

Alfa Laval

3 Nos

SUB TOTAL - PLANT ROOM (3 PHASE)

1579.20

Plant Room 1 CHILLERS - 275 TR ( 2# working + 1 Standby) Carrier 250.00 Nos 750.00

2 PRIMARY CHILLED WATER PUMPS ( 2# working + 1 Standby)

Armstrong 11.00 Nos 33.00

3 SECONDARY CHILLED WATER PUMPS ( 2# working + 1 Armstrong 30.00 Nos 90.00


30



Standby)

4 COOLING TOWERS ( 2# working + 1 Standby) 7.50 Nos 22.50

5 COOLING WATER PUMPS ( 2# working + 1 Standby) Armstrong 30.00 Nos 90.00 6 PLANTROOM VENTILATION FANS Nicotra 2.20 Nos 8.80 SUB TOTAL - PLANT ROOM (3 PHASE) Thermal Storage Tank Syatem of Capacity - 2000TRH Nos 3 PH Total 994.30

Lobby-3 Multi Stage Evaporative Cooling Units for General Ventilation for Lobby-3

HMX 12500 CFM 2 Nos

MINISTERS BLOCK

A.C. AREAS AHUs 1 GROUND FLOOR MIN/GR/S1/H-FLR/AHU-01/7.63TR/4630 CFM Blue Star 2.20 1 No 2.20

2 FIRST FLOOR MIN/1st/S1/H-FLR/AHU-01/24.93TR/14475CFM (WITH VFD )

Blue Star 7.50 1 No 7.50

3 MIN/1st/S2/H-FLR/AHU-02/22.62TR/12828CFM (WITH VFD )


4 MIN/1st/S3/H-FLR/AHU-03/29.06TR/15835CFM (WITH VFD )


5 SECOND FLOOR MIN/2nd/S1/H-FLR/AHU-01/24.93TR/14475CFM (WITH VFD )


6 MIN/2nd/S2/H-FLR/AHU-02/22.62TR/12828CFM (WITH VFD )


7 MIN/2nd/S3/H-FLR/AHU-03/20.59TR/11440CFM (WITH VFD )


8 THIRD FLOOR MIN/3rd/S1/H-FLR/AHU-01/24.93TR/14475CFM (WITH VFD )


9 MIN/3rd/S2/H-FLR/AHU-02/22.62TR/12828CFM (WITH VFD )


10 MIN/3rd/S3/H-FLR/AHU-03/20.59TR/11440CFM (WITH VFD )



31



11 FOURTH FLOOR MIN/4th/S1/H-FLR/AHU-01/24.94TR/14475CFM (WITH VFD )


12 MIN/4th/S2/H-FLR/AHU-02/22.62TR/12828CFM (WITH VFD )




14 FIFTH FLOOR MIN/5th/S1/H-FLR/AHU-01/9.16TR/5495CFM (WITH VFD ) Blue Star 3.70 1 No 3.70

15 MIN/5th/S1/H-FLR/AHU-02/16.16TR/9825CFM (WITH VFD ) Blue Star 5.50 1 No 5.50 16 MIN/5th/S1/H-FLR/AHU-03/5.34TR/2920CFM Blue Star 2.20 1 No 2.20 17 MIN/5th/S1/H-FLR/AHU-04/17.13TR/9805CFM Blue Star 5.50 1 No 5.50 18 MIN/5th/S1/H-FLR/AHU-05/20.8TR/11195CFM (WITH VFD ) Blue Star 5.50 1 No 5.50 19 MIN/5th/S1/H-FLR/AHU-06/8.86TR/4891CFM Blue Star 3.70 1 No 3.70



VENTILATED AREAS

Ex. Fans/ pressurized Fans

21 PANTRY Nicotra 1 No 0.00 PRESSURISED AREAS

22 STAIRCASE-1_ 11800 CFM, 40mm St. Pr. Nicotra 5.50 1 No 5.50 23 STAIRCASE-2_ 11800 CFM, 40mm St. Pr. Nicotra 5.50 1 No 5.50

SUB TOTAL - MINISTER'S BLOCK (3 PHASE) 122.80

SUB TOTAL - MINISTER'S BLOCK (1 PHASE) 0.00 SECRETARIES BLOCK

A.C AREAS AHUs 1 GROUND FLOOR SEC/GR/S1/H-FLR/AHU-01/18.9TR/11185 CFM (with VFD) Blue Star 5.50 1 No 5.50

2 SEC/GR/S2/H-FLR/AHU-02/25.2TR/13752CFM (with VFD) Blue Star 7.50 1 No 7.50




32



5 FIRST FLOOR SEC/1ST/S1/H-FLR/AHU-01/18.89TR/11184CFM (with VFD)


6 SEC/1ST/S2/H-FLR/AHU-02/19.03TR/10915CFM (with VFD)


7 SEC/1ST/S3/H-FLR/AHU-03/20.68 TR/12856CFM (with VFD)


8 SEC/1ST/S4/H-FLR/AHU-04/17.97TR/10928CFM (with VFD)


9 SECOND FLOOR SEC/2nd/S1/H-FLR/AHU-01/18.25TR/11184CFM (with VFD) Blue Star 5.50 1 No 5.50

10 SEC/2nd/S2/H-FLR/AHU-02/23.04TR/12014CFM (with VFD) Blue Star 5.50 1 No 5.50

11 SEC/2nd/S3/H-FLR/AHU-03/20.70TR/12856CFM (with VFD) Blue Star 7.50 1 No 7.50

12 SEC/2nd/S4/H-FLR/AHU-04/18.56TR/10928CFM (with VFD) Blue Star 5.50 1 No 5.50 13 THIRD FLOOR SEC/3rd/S1/H-FLR/AHU-01/18.23TR/11184CFM (with VFD) Blue Star 5.50 1 No 5.50

14 SEC/3rd/S2/H-FLR/AHU-02/15.71TR/9918CFM (with VFD) Blue Star 5.50 1 No 5.50

15 SEC/3rd/S3/H-FLR/AHU-03/20.68TR/12856CFM (with VFD) Blue Star 7.50 1 No 7.50

16 SEC/3rd/S4/H-FLR/AHU-04/18.58TR/10928CFM (with VFD) Blue Star 5.50 1 No 5.50 17 FOURTH FLOOR SEC/4th/S1/H-FLR/AHU-01/13.7TR/8092CFM (with VFD) Blue Star 3.70 1 No 3.70

18 SEC/4th/S2/H-FLR/AHU-02/7.35TR/4400CFM (with VFD) Blue Star 2.20 1 No 2.20

19 SEC/4th/S3/H-FLR/AHU-03/22.15TR/13241CFM (with VFD) Blue Star 7.50 1 No 7.50

20 SEC/4th/S4/H-FLR/AHU-04/14.78TR/8125CFM (with VFD) Blue Star 3.70 1 No 3.70 21 SEC/4th/S2/H-FLR/AHU-05/9.91TR/5436CFM 3.70 1 No 3.70 VENTILATED AREAS

Ex. Fans

22 MAIN KITCHEN EX. FAN - 11,200 CFM @ 50 mm SP Nicotra 5.50 1 No 5.50

23 MAIN KITCHEN F.A. FAN - 10,000 CFM @ 40 mm SP Nicotra 5.50 1 No 5.50 24 GENTS TOILET EX. FANS - 1,000cfm Nicotra 0.37 5 Nos 1.85 25 LADIES & PH HANDI TOILET EX. FANS - 800 cfm Nicotra 0.37 5 Nos 1.85

PRESSURISED pressurised Fans


33



AREAS

26 STAIRCASE-1_ 10000 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00 27 STAIRCASE-2_10000 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00 28 STAIRCASE-3_10000 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00

SUB TOTAL - SECRETARIES BLOCK (3 PHASE) 138.80

SUB TOTAL - SECRETARIES BLOCK (1 PHASE) 3.70

SECTIONS BLOCK

A.C AREAS AHUs 1 GROUND FLOOR SECTN/GR/S1/H-FLR/AHU-01/30.63TR/15197 CFM Blue Star 7.50 1 No 7.50

2 SECTN/GR/S2/H-FLR/AHU-02/44.84TR/22118 CFM Blue Star 11.00 1 No 11.00

3 SECTN/GR/S3/H-FLR/AHU-03/31.91TR/15758 CFM Blue Star 7.50 1 No 7.50

4 SECTN/GR/S4/H-FLR/AHU-04/30.65TR/15200CFM Blue Star 7.50 1 No 7.50 5 FIRST FLOOR SECTN/1F/S1/H-FLR/AHU-01/30.63TR/15197 CFM Blue Star 7.50 1 No 7.50

6 SECTN/1F/S2/H-FLR/AHU-02/44.98TR/22200 CFM Blue Star 11.00 1 No 11.00

7 SECTN/1F/S3/H-FLR/AHU-03/32.19TR/15922CFM Blue Star 7.50 1 No 7.50

8 SECTN/1F/S4/H-FLR/AHU-04/30.65TR/15200CFM Blue Star 7.50 1 No 7.50 9 SECOND FLOOR SECTN/2F/S1/H-FLR/AHU-01/30.76TR/15276 CFM Blue Star 7.50 1 No 7.50 10 SECTN/2F/S2/H-FLR/AHU-02/44.16TR/21807 CFM Blue Star 11.00 1 No 11.00 11 SECTN/N2F/S3/H-FLR/AHU-03/30.28TR/14974CFM Blue Star 7.50 1 No 7.50 12 SECTN/1F/S4/H-FLR/AHU-04/30.78TR/15279CFM Blue Star 7.50 1 No 7.50 13 THIRD FLOOR SECTN/3F/S1/H-FLR/AHU-01/33.83TR/17207 CFM Blue Star 7.50 1 No 7.50



16 SECTN/3F/S4/H-FLR/AHU-04/33.66TR/17103CFM Blue Star 7.50 1 No 7.50 VENTILATED AREAS

Ex. Fans


34



17 GENTS TOILET EX. FANS - 2,000 CFM Nicotra 0.55 4 Nos 2.20 18 LADIES & PH HANDI TOILET EX. FANS - 1,200 CFM Nicotra 0.37 4 Nos 1.48 PRESSURISED AREAS

pressurised Fans

19 STAIRCASE-1_8400 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00 20 STAIRCASE-2_8400 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00 21 STAIRCASE-3_8400 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00 22 STAIRCASE-4_8400 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00 23 STAIRCASE-5_8400 CFM, 40mm St. Pr. Nicotra 3.00 1 No 3.00

SUB TOTAL - SECTIONS BLOCK (3 PHASE) 149.00

SUB TOTAL - SECTIONS BLOCK (1 PHASE) 3.68

ANCILLARY FACILITIES 'A'

A.C AREAS CSUs 1 GROUND FLOOR ANC-A/GF/H-FLR/AHU-01/14.03TR/7660CFM Bluestar 3.70 1 No 3.70 2 Cabin-01 (U3b) - ANC-A/GF/FCU-01/1.5TR/800CFM Bluestar 1 No 0.00 3 FIRST FLOOR ANC-A/1F/H-FLR/AHU-01/36.11TR/18034CFM Blue Star 11.00 1 No 11.00 4 ANC-A/1F/CSU-02/6.05TR/3310CFM Blue Star 2.20 1 No 2.20 5 ANC-A/1F/CSU-03/3.14TR/1500CFM Blue Star 1.10 1 No 1.10 6 ANC-A/1F/CSU-04/2.72TR/1400CFM Blue Star 1.10 1 No 1.10 7 SECOND FLOOR ANC-A/2nd/H-FLR/AHU-01/27.76TR/13840CFM Blue Star 7.50 1 No 7.50

8 Cabin-(11b) - ANC-A/2F/FCU-01/1.9TR/902CFM Blue Star 1 No 0.00

9 CONTROL RM ANC-A/2nd/PAHU-01/12.2TR/6850CFM Blue Star 2 Nos 0.00

SERVER RM ANC-A/2nd/PAHU-02/15.5TR/9190CFM Blue Star 2 Nos 0.00 VENTILATED AREAS

Ex. Fans

1 BASEMENT PUMP ROOM F. FAN-10,800 cfm Nicotra 3.70 1 No 3.70 PUMP ROOM EXH. FAN-12,300 cfm Nicotra 5.50 1 No 5.50


35



1 GROUND FLOOR PWD & PHE STORE -5,000 cfm GEC 2 Nos 0.00 2 ELECTRIAL & MECHANICAL STORE - 3,000 cfm GEC 2.20 2 Nos 4.40 3 MISC. UTILITIES AREA - 3,000 cfm GEC 2.20 3 Nos 6.60 4 FIRST FLOOR FURNITURE - 2,000 cfm GEC 2 Nos 0.00 5 COMPUTER/ELECTRONICS STORE - 2,000 cfm GEC 2 Nos 0.00 6 STATIONERY STORE - 2,500 cfm GEC 3 Nos 0.00 7 CYCLOSTYLE - 2,000 cfm GEC 1 No 0.00 8 HOUSEKEEPING - 2,500 cfm GEC 1 No 0.00 9 SECOND FLOOR VAULT ROOM - 2,000 cfm GEC 6 Nos 0.00 10 RECORD ROOM - 2,500 cfm GEC 12 Nos 0.00 11 WAITING ROOM - 1,500 cfm GEC 2 Nos 0.00 12 SUB TOTAL - ANCILLARY FACILITIES 'A' (3 PHASE) 42.40

SUB TOTAL - ANCILLARY FACILITIES 'A' (1 PHASE) 4.40

ANCILLARY FACILITIES 'B'

A.C AREAS AHUs 1 GROUND FLOOR Care Taker (5a) - ANC-B/GF/FCU-01/1.67TR/925CFM Blue Star 1 No 0.00 2 ANC-B/GF/H-FLR/AHU-01/21.28TR/11550CFM Blue Star 5.50 1 No 5.50

3 FIRST FLOOR ANC-B/1F/H-FLR/AHU-01/25.36TR/12695CFM 7.50 1 No 7.50 4 SECOND FLOOR ANC-B/2nd/S1/H-FLR/AHU-01/7.04TR/3576CFM Blue Star 2.20 1 No 2.20 5 ANC-B/2nd/S1/H-FLR/AHU-02/4.1TR/2170CFM Blue Star 1.50 1 No 1.50 6 ANC-B/2nd/S1/H-FLR/AHU-03/6.7TR/3370CFM Blue Star 2.20 1 No 2.20 7 ANC-B/2nd/S1/H-FLR/AHU-04/6.12TR/3100CFM Blue Star 2.20 1 No 2.20

8 ANC-B/2nd/S1/H-FLR/AHU-05/7.31TR/3985CFM Blue Star 2.20 1 No 2.20


36



VENTILATED AREAS

Ex. Fans/pressurised Fans

1 GROUND FLOOR WET / DRY GARBAGE COLLECTION - 1,500 cfm GEC 2 Nos 0.00 2 GARDENER STORE - 1,500 cfm GEC 2 Nos 0.00 3 WASTE PAPER COLLECTION - 1,500 cfm GEC 2 Nos 0.00 4 EXHIBITION STORE - 1,500 cfm GEC 2 Nos 0.00 5 STORE - 1,000 cfm GEC 2 Nos 0.00 1 FIRST FLOOR KITCHEN EX. FAN - 30,000 cfm @ 50 mm SP Nicotra 1 No 0.00 KITCHEN F.A. FAN - 21,000 cfm @ 40 mm SP Nicotra 1 No 0.00 SECOND FLOOR PANTRY 1 No 0.00 2 TOILET EX. FANS IN CRECHE GEC 2 Nos 0.00 3 LADIES TOILET EX. FANS GEC 2 Nos 0.00 GENTS TOILET EX. FANS GEC 3 Nos 0.00 MINISTERS TOILET EX. FANS GEC 2 Nos 0.00 MINISTERS TOILET EX. FANS GEC 4 Nos 0.00 SUB TOTAL - ANCILLARY FACILITIES 'B' (3 PHASE) 23.30

SUB TOTAL - ANCILLARY FACILITIES 'B' (1 PHASE) 0.00

BLOCK - I A.C AREAS 1 GROUND FLOOR BLOCK-I/GR/CSU/AHU-01/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 2 BLOCK-I/GR/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 3 BLOCK-I/GR/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 4 FIRST FLOOR BLOCK-I/1ST/CSU/AHU-01/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 5 BLOCK-I/1ST/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 6 BLOCK-I/1ST/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 7 BLOCK-I/1ST/CSU/AHU-04/5.9TR/2660CFM Blue Star 1.10 Nos 1.10 8 SECOND FLOOR BLOCK-I/2nd/CSU/AHU-01/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 9 BLOCK-I/2nd/CSU/AHU-02/6.5TR/3150CFM Blue Star 0.55 Nos 0.55 10 BLOCK-I/2nd/CSU/AHU-03/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 11 BLOCK-I/2nd/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 12 BLOCK-I/2nd/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55


37



13 THIRD FLOOR BLOCK-I/3rd/CSU/AHU-01/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 14 BLOCK-I/3rd/CSU/AHU-02/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 15 BLOCK-I/3rd/CSU/AHU-03/6.5TR/2850CFM Blue Star 1.10 Nos 1.10 16 BLOCK-I/3rd/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 17 BLOCK-I/3rd/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 18 BLOCK-I/3rd/CSU/AHU-06/6.0TR/3200CFM Blue Star 1.50 Nos 1.50 19 BLOCK-I/3rd/CSU/AHU-07/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 20 FOURTH FLOOR BLOCK-I/4th/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 21 BLOCK-I/4th/CSU/AHU-02/6.5TR/3000CFM Blue Star 1.10 Nos 1.10 22 BLOCK-I/4th/CSU/AHU-03/6.5TR/3000CFM Blue Star 1.10 Nos 1.10 23 BLOCK-I/4th/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 24 BLOCK-I/4th/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 BLOCK -II A.C AREAS 1 GROUND FLOOR BLOCK-II/GR/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 2 BLOCK-II/GR/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 3 BLOCK-II/GR/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 4 FIRST FLOOR BLOCK-II/1st/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 5 BLOCK-II/1st/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 6 BLOCK-II/1st/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 7 SECOND FLOOR BLOCK-II/2nd/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 8 BLOCK-II/2nd/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 9 BLOCK-II/2nd/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 10 THIRD FLOOR BLOCK-II/3rd/CSU/AHU-01/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 11 BLOCK-II/3rd/CSU/AHU-02/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 12 BLOCK-II/3rd/CSU/AHU-03/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 13 BLOCK-II/3rd/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 14 BLOCK-II/3rd/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 15 BLOCK-II/3rd/CSU/AHU-06/4.5TR/2150CFM Blue Star 0.75 Nos 0.75 16 FOURTH FLOOR BLOCK-II/4th/CSU/AHU-01/6.5TR/3000CFM Blue Star 1.10 Nos 1.10


38



17 BLOCK-II/4th/CSU/AHU-02/7.0TR/3300CFM Blue Star 1.50 Nos 1.50 18 BLOCK-II/4th/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 19 BLOCK-II/4th/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 BLOCK III Block III A.C AREAS 1 GROUND FLOOR BLOCK-III/GR/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 2 BLOCK-III/GR/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 3 BLOCK-III/GR/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 4 FIRST FLOOR BLOCK-III/1st/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 5 BLOCK-III/1st/CSU/AHU-02/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 6 BLOCK-III/1st/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 7 BLOCK-III/1st/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 8 SECOND FLOOR BLOCK-III/2nd/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 9 BLOCK-III/2nd/CSU/AHU-02/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 10 BLOCK-III/2nd/CSU/AHU-03/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 11 BLOCK-III/2nd/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 12 BLOCK-III/2nd/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 13 THIRD FLOOR BLOCK-III/3rd/CSU/AHU-01/6.7TR/3100CFM Blue Star 1.10 Nos 1.10 14 BLOCK-III/3rd/CSU/AHU-02/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 15 BLOCK-III/3rd/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 16 BLOCK-III/3rd/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 17 FOURTH FLOOR BLOCK-III/4th/CSU/AHU-01/7.0TR/3300CFM Blue Star 1.50 Nos 1.50 18 BLOCK-III/4th/CSU/AHU-02/6.5TR/3000CFM Blue Star 1.10 Nos 1.10 19 BLOCK-III/4th/CSU/AHU-03/6.5TR/3000CFM Blue Star 1.10 Nos 1.10 20 BLOCK-III/4th/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 21 BLOCK-III/4th/CSU/AHU-05/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 BLOCK IV Block IV A.C AREAS


39



1 GROUND FLOOR BLOCK-IV/GR/CSU/AHU-01/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 2 BLOCK-IV/GR/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 3 BLOCK-IV/GR/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 4 FIRST FLOOR BLOCK-IV/1st/CSU/AHU-01/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 5 BLOCK-IV/1st/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 6 BLOCK-IV/1st/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 7 SECOND FLOOR BLOCK-IV/2nd/CSU/AHU-01/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 8 BLOCK-IV/2nd/CSU/AHU-02/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 9 BLOCK-IV/2nd/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 10 BLOCK-IV/2nd/CSU/AHU-04/2.14TR/1048CFM Blue Star 0.55 Nos 0.55 Blue Star 11 THIRD FLOOR BLOCK-IV/3rd/CSU/AHU-01/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 12 BLOCK-IV/3rd/CSU/AHU-02/6.1TR/2750CFM Blue Star 1.10 Nos 1.10 13 BLOCK-IV/3rd/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 14 BLOCK-IV/3rd/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 Blue Star 15 FOURTH FLOOR BLOCK-IV/4th/CSU/AHU-01/6.5TR/3000CFM Blue Star 1.10 Nos 1.10 16 BLOCK-IV/4th/CSU/AHU-02/6.5TR/3000CFM Blue Star 1.10 Nos 1.10 17 BLOCK-IV/4th/CSU/AHU-03/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 18 BLOCK-IV/4th/CSU/AHU-04/2.5TR/1300CFM Blue Star 0.55 Nos 0.55 ANCILLARY BLOCK

ANCILLARY BLOCK 1 ANC/H-FLR/AHU-01/12.9TR/5800CFM Blue Star 3.00 Nos 3.00 2 ANC/H-FLR/AHU-02/16.83TR/8300CFM Blue Star 4.00 Nos 4.00 3 ANC/H-FLR/AHU-03/18.99TR/6020CFM Blue Star 3.00 Nos 3.00 4 ANC/H-FLR/AHU-04/10.22TR/4430CFM Blue Star 3.00 Nos 3.00 5 ANC/H-FLR/AHU-05/8.85TR/4100CFM Blue Star 2.20 Nos 2.20 6 ANC/H-FLR/AHU-06/6.10TR/2600CFM Blue Star 1.50 Nos 1.50 7 ANC/H-FLR/AHU-07/15.58TR/7085CFM Blue Star 4.00 Nos 4.00 8 ANC/H-FLR/AHU-08/26.53TR/9385CFM Blue Star 5.50 Nos 5.50 3 PH TOTAL 93.60 UPS & CONTROL


40



ROOM

A.C. AREAS DFUs Dual fluid units - MAKE INDOOR UNIT - NUTECH & OUTDOOR UNIT - BLUESTAR

AHUs MINISTER BLOCK 1 MIN/1st/S3/H-CSU/AHU-04/3.2TR/1850CFM Blue Star 1.10 1 No 1.10 2 MIN/2nd/S3/H-CSU/AHU-04/3.6TR/2101CFM Blue Star 1.10 1 No 1.10 3 MIN/3rd/S3/H-CSU/AHU-04/3.6TR/2101CFM Blue Star 1.10 1 No 1.10 4 MIN/4th/S3/H-FLR/AHU-04/3.6TR/2101CFM Blue Star 1.10 1 No 1.10 SECRETARY'S BLOCK 5 SEC/GR/S1/H-CSU/AHU-05/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 6 SEC/GR/S4/H-CSU/AHU-06/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 7 SEC/1st/S1/H-CSU/AHU-05/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 8 SEC/1st/S4/H-CSU/AHU-06/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 9 SEC/2nd/S1/H-CSU/AHU-05/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 10 SEC/2nd/S4/H-CSU/AHU-06/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 11 SEC/3rd/S1/H-CSU/AHU-05/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 12 SEC/3rd/S4/H-CSU/AHU-06/2.6TR/1525CFM Blue Star 1.10 1 No 1.10 13 SEC/4th/S1/H-CSU/AHU-06/2.7TR/1585CFM Blue Star 1.10 1 No 1.10 14 SEC/4th/S4/H-CSU/AHU-07/2.7TR/1585CFM Blue Star 1.10 1 No 1.10 15 SEC/4th/DMC/AHU-06/14.48TR/7976CFM Blue Star 7.50 1 No 7.50 SECTIONS BLOCK 16 SECTN/GR/S1/H-CSU/AHU-01/3.09TR/1678CFM Blue Star 1.10 1 No 1.10

17 SECTN/GR/S2/H-CSU/AHU-02/3.65TR/1906CFM Blue Star 1.10 1 No 1.10

18 SECTN/1st/S1/H-CSU/AHU-01/2.86TR/1680CFM Blue Star 1.10 1 No 1.10

19 SECTN/1st/S2/H-CSU/AHU-02/3.19TR/1910CFM Blue Star 1.10 1 No 1.10

20 SECTN/2nd/S1/H-CSU/AHU-01/3.09TR/1680CFM Blue Star 1.10 1 No 1.10

21 SECTN/2nd/S2/H-CSU/AHU-02/3.65TR/1910CFM Blue Star 1.10 1 No 1.10

22 SECTN/3rd/S1/H-CSU/AHU-01/3.27TR/1785CFM Blue Star 1.10 1 No 1.10

23 SECTN/3rd/S2/H-CSU/AHU-02/3.95TR/2086CFM Blue Star 1.10 1 No 1.10 ANCILLARY "A" 24 ANC-A/1F/H-CSU/AHU-01/3.14TR/1365CFM Blue Star 1.10 1 No 1.10 25 ANC-A/1F/H-CSU/AHU-02/6.05TR/3310CFM Blue Star 1.50 1 No 1.50 26 ANC-A/1F/H-CSU/AHU-03/2.72TR/1440CFM Blue Star 1.10 1 No 1.10


41



ANCILLARY "B" 27 ANC-B/GR/H-CSU/AHU-01/4.0TR/2220CFM Blue Star 1.10 1 No 1.10 28 ANC-B/1st/H-CSU/AHU-01/4.0TR/2285CFM Blue Star 1.10 1 No 1.10 29 ANC-B/2nd/H-CSU/AHU-06/5.0TR/2430CFM Blue Star 1.50 1 No 1.50

SUB TOTAL - UPS & CONTROL RM (3 PHASE) 39.10

SUB TOTAL - UPS & CONTROL RM (1 PHASE) 0.00

L - 1 VENTILATED AREAS

Ex. Fans/pr.Fans

1 SECOND FLOOR L, G, PH TOILETS & JANITOR FANS - 1,000 CFM 0.37 4 Nos 1.48 SUB TOTAL - L 1 (3 PHASE) 1.48

SUB TOTAL - L 1 (1 PHASE)

0.00

L - 2 VENTILATED AREAS

1 SECOND FLOOR L, G, PH TOILETS & JANITOR FANS - 2,000 CFM 0.55 5 Nos 2.75 SUB TOTAL - L 2 (3 PHASE) 2.75 SUB TOTAL - L 2 (1 PHASE) 0.00 L - 3 A.C AREAS 1 GROUND FLOOR C S Officer & Staff 1.5 1 No 1.50 0.0 AIR COOLED AREAS

LOBBY - GROUND FLOOR

BLOWER FAN 5.50 2 Nos 11.0 SECONDARY FAN 0.37 4 Nos 1.48 VENTILATED AREAS

1 SECOND FLOOR L, G, PH TOILETS & JANITOR FANS G-5 0.55 5 Nos 2.75


42



SUB TOTAL - L 3 (3 PHASE) 16.73 SUB TOTAL - L 3 (1 PHASE) L - 4 VENTILATED AREAS

1 SECOND FLOOR L, G, PH TOILETS & JANITOR FANS - 2,000 CFM 0.55 5 Nos 2.75 SUB TOTAL - L 4 (3 PHASE) 2.75 SUB TOTAL - L 4 (1 PHASE) 0.00 L - 5 VENTILATED AREAS

1 SECOND FLOOR L, G, PH TOILETS & JANITOR FANS - 2,000 CFM 0.55 4 Nos 2.20 SUB TOTAL - L 5 (3 PHASE) 2.20 SUB TOTAL - L 5 (1 PHASE) 0.00 Plant Room

Cabinet type Exhaust air Unit for Toilets/ Kitchen for following capacities :

36000 CFM, 50mm St. Pr. Nicotra 18.50 Nos 18.50 13000 CFM, 50mm St. Pr. Nicotra 7.50 Nos 7.50 2000 CFM, 25mm St. Pr. Nicotra 0.55 Nos 13.75 1000 CFM, 25 mm St. Pr. Nicotra 0.37 Nos 0.74 800 CFM, 25 mm St. Pr. GEC 0.37 Nos 7.40 700 CFM, 25 mm St. Pr. GEC 0.37 Nos 7.40

Cabinet type Fresh Air Units with Filters for following capacities :

33000 CFM, 40mm St. Pr. Nicotra 15.00 Nos 15.00 12000 CFM, 40mm St. Pr. Nicotra 5.50 Nos 5.50

Staircase Pressurization fans for following capacities :

10100 CFM, 40mm St. Pr. Nicotra 3.70 Nos 29.60 3 PH Total 76.10 1 PH Total 29.29

NOTE: Above load list is indicative only and subject to cahnged based on final approved drawings and Technical submittals.


43



VENTILATION WORK - SECTION 'L'

Multi Stage Evaporative Cooling Units for General Ventilation as per drawings - for Block I , Block II , Block III ,BlockIV Ancillary for following capacities :

138000 CFM HMX 115.00 Nos 460.00 135000 CFM HMX 115.00 Nos 230.00 123000 CFM HMX 108.00 Nos 216.00 22250 CFM HMX 15.00 Nos 15.00 20000 CFM HMX 15.00 Nos 15.00 6200CFM HMX 6.00 Nos 6.00 5800 CFM HMX 6.00 Nos 6.00 3PH Total 948.00 1 Class one Officer FCU 2TR (All Blocks) Citizen 0.35 Nos 81.55 2 Class one Officer FCU 2.5 TR (All Blocks) Citizen 0.40 Nos 1.20 1 PH Total 82.75 Total 3 Phase 4232.51 Total Single Phase 123.82


44

APPENDIX– D5 INVENTORY FOR HVAC


45

INVENTORY FOR HVAC The VAV units shall be complete and consist of temperature sensor & controller for receiving Temp. actuator etc. complete with mounting flange, power & control cabling & independently supported.

Equipment Capacity Make Quantity UNiT VAVs 450 CFM Honey well 210 Nos

470 CFM Honey well 1 Nos








































46

Equipment Capacity Make Quantity UNiT












































47

Air OZONE System (Ozone Generator System Comprising Of Duct Mounted Ozone Generator, VOC Sensor With Controllers, CO2 Sensor With Controllers, Ozone Monitoring & Hi-Ozone Cutout Switch, Motorized Dampers With Actuators & Control On Fresh Air Inlet And Control Wiring)

Equipment Capacity Make Quantity UNiT Air OZONE System

MIN/GR/S1/H-FLR/AHU-01/7.63TR/4630 CFM Ruks 1 No

MIN/1st/S1/H-FLR/AHU-01/24.93TR/14475CFM Ruks 1 No



MIN/2nd/S1/H-FLR/AHU-01/24.93TR/14475CFM Ruks 1 No



MIN/3rd/S1/H-FLR/AHU-01/24.93TR/14475CFM Ruks 1 No



MIN/4th/S1/H-FLR/AHU-01/24.94TR/14475CFM Ruks 1 No










SEC/GR/S1/H-FLR/AHU-01/18.9TR/11185 CFM Ruks 1 No

SEC/GR/S2/H-FLR/AHU-02/25.2TR/13752CFM Ruks 1 No



SEC/1ST/S1/H-FLR/AHU-01/18.89TR/11184CFM Ruks 1 No


SEC/1ST/S3/H-FLR/AHU-03/20.68 TR/12856CFM Ruks 1 No


SEC/2nd/S1/H-FLR/AHU-01/18.25TR/11184CFM Ruks 1 No




SEC/3rd/S1/H-FLR/AHU-01/18.23TR/11184CFM Ruks 1 No




SEC/4th/S1/H-FLR/AHU-01/13.7TR/8092CFM Ruks 1 No





48

Equipment Capacity Make Quantity UNiT


SECTN/GR/S1/H-FLR/AHU-01/30.63TR/15197 CFM Ruks 1 No



SECTN/GR/S4/H-FLR/AHU-04/30.65TR/15200CFM Ruks 1 No

SECTN/1F/S1/H-FLR/AHU-01/30.63TR/15197 CFM Ruks 1 No


SECTN/1F/S3/H-FLR/AHU-03/32.19TR/15922CFM Ruks 1 No




SECTN/N2F/S3/H-FLR/AHU-03/30.28TR/14974CFM Ruks 1 No






ANC-A/GF/H-FLR/AHU-01/14.03TR/7660CFM Ruks 1 No

ANC-A/1F/H-FLR/AHU-01/36.11TR/18034CFM Ruks 1 No

ANC-A/1F/H-CSU/AHU-01/3.14TR/1365CFM Ruks 1 No




ANC-A/2nd/H-FLR/AHU-01/27.76TR/13840CFM Ruks 1 No

ANC-B/GF/H-FLR/AHU-01/21.28TR/11550CFM Ruks 1 No

ANC-B/1F/H-FLR/AHU-01/25.36TR/12695CFM Ruks 1 No

ANC-B/2nd/S1/H-FLR/AHU-01/7.04TR/3576CFM Ruks 1 No





L3/GrF/S1/H-FLR/AHU-01/3.23TR/1952CFM Ruks 1 No Note : Entire HVAC system are controlled by BMS system except for VAVs, air ozoniser & free flow type propeller fans


49

APPENDIX– D6 INVENTORY FOR FIRE ALARM SYSTEM

LOCATION FLOOR / LEVEL PHOTOELECTRIC SMOKE DETECTOR ABOVE FALSE CEILING

PHOTOELECTRIC SMOKE DETECTOR BELOW FALSE CEILING

HEAT DETECTOR ABOVE FALSE CEILING

MONITOR MODULE CONTROL RELAY MODULE

Make QTY Unit Make QTY Unit Make QTY Unit Make QTY Unit Make QTY Unit

ANCILLARY-A GROUND FLOOR Honeywell 46 nos Honeywell 14 nos Honeywell 3 nos Honeywell 0 nos Honeywell 2 nos

FIRST FLOOR Honeywell 70 nos Honeywell 66 nos Honeywell 1 nos Honeywell 0 nos Honeywell 1 nos

SECOND FLOOR Honeywell 56 nos Honeywell 43 nos Honeywell 0 nos Honeywell 0 nos Honeywell 1 nos

ANCILLARY-B GROUND FLOOR Honeywell 30 nos Honeywell 21 nos Honeywell 0 nos Honeywell 0 nos Honeywell 0 nos



MINISTER'S GROUND FLOOR Honeywell 19 nos Honeywell 13 nos Honeywell 1 nos Honeywell 0 nos Honeywell 1 nos



THIRD FLOOR Honeywell 50 nos Honeywell 63 nos Honeywell 3 nos Honeywell 0 nos Honeywell 3 nos

FOURTH FLOOR Honeywell 50 nos Honeywell 62 nos Honeywell 3 nos Honeywell 0 nos Honeywell 3 nos

FIFTH FLOOR Honeywell 50 nos Honeywell 71 nos Honeywell 1 nos Honeywell 0 nos Honeywell 1 nos

SECRETARIES' GROUND FLOOR Honeywell 64 nos Honeywell 84 nos Honeywell 5 nos Honeywell 4 nos Honeywell 7 nos




FOURTH FLOOR Honeywell 52 nos Honeywell 64 nos Honeywell 7 nos Honeywell 4 nos Honeywell 7 nos

SECTIONS GROUND FLOOR Honeywell 89 nos Honeywell 142 nos Honeywell 4 nos Honeywell 4 nos Honeywell 3 nos




TOTAL 1147 1473 68 36 74


50

LOCATION FLOOR / LEVEL MANUAL PULL STATION FAULT ISOLATOR MODULE HOOTER CUM STROBE RESPONSE INDICATOR FIRE ALARM PANEL

Make Actual Unit Make Actual Unit Make Actual Unit Make Actual Unit Make Actual Unit

ANCILLARY-A GROUND FLOOR Honeywell 5 nos Honeywell 4 nos GE Genesis 3 nos Safeway 13 nos Honeywell 0 nos FIRST FLOOR Honeywell 5 nos Honeywell 6 nos GE Genesis 2 nos Safeway 26 nos Honeywell 0 nos SECOND FLOOR Honeywell 8 nos Honeywell 6 nos GE Genesis 2 nos Safeway 16 nos Honeywell 1 nos ANCILLARY-B GROUND FLOOR Honeywell 1 nos Honeywell 3 nos GE Genesis 2 nos Safeway 19 nos Honeywell 0 nos FIRST FLOOR Honeywell 1 nos Honeywell 1 nos GE Genesis 2 nos Safeway 9 nos Honeywell 0 nos SECOND FLOOR Honeywell 3 nos Honeywell 2 nos GE Genesis 1 nos Safeway 9 nos Honeywell 0 nos

MINISTER'S GROUND FLOOR Honeywell 6 nos Honeywell 2 nos GE Genesis 3 nos Safeway 19 nos Honeywell 0 nos FIRST FLOOR Honeywell 5 nos Honeywell 7 nos GE Genesis 3 nos Safeway 53 nos Honeywell 0 nos SECOND FLOOR Honeywell 5 nos Honeywell 6 nos GE Genesis 3 nos Safeway 47 nos Honeywell 0 nos THIRD FLOOR Honeywell 5 nos Honeywell 6 nos GE Genesis 3 nos Safeway 49 nos Honeywell 0 nos FOURTH FLOOR Honeywell 5 nos Honeywell 6 nos GE Genesis 3 nos Safeway 49 nos Honeywell 0 nos FIFTH FLOOR Honeywell 7 nos Honeywell 4 nos GE Genesis 3 nos Safeway 50 nos Honeywell 0 nos

SECRETARIES' GROUND FLOOR Honeywell 13 nos Honeywell 7 nos GE Genesis 5 nos Safeway 62 nos Honeywell 1 nos

FIRST FLOOR Honeywell 13 nos Honeywell 7 nos GE Genesis 4 nos Safeway 60 nos Honeywell 0 nos SECOND FLOOR Honeywell 13 nos Honeywell 7 nos GE Genesis 4 nos Safeway 60 nos Honeywell 0 nos THIRD FLOOR Honeywell 13 nos Honeywell 6 nos GE Genesis 4 nos Safeway 59 nos Honeywell 0 nos FOURTH FLOOR Honeywell 13 nos Honeywell 8 nos GE Genesis 4 nos Safeway 50 nos Honeywell 0 nos

SECTIONS GROUND FLOOR Honeywell 20 nos Honeywell 11 nos GE Genesis 6 nos Safeway 85 nos Honeywell 1 nos FIRST FLOOR Honeywell 20 nos Honeywell 12 nos GE Genesis 5 nos Safeway 88 nos Honeywell 0 nos SECOND FLOOR Honeywell 20 nos Honeywell 11 nos GE Genesis 5 nos Safeway 83 nos Honeywell 0 nos THIRD FLOOR Honeywell 20 nos Honeywell 13 nos GE Genesis 5 nos Safeway 83 nos Honeywell 0 nos TOTAL 201 135 72 989 3

Request For Proposal for Selection of a Facility Management Service Provider for Mantralya Mahanadi Bhawan and its campus at Naya Raipur

51

APPENDIX– D7 ABSTRACT OF LV SYSTEM CCTV System

Sl. No. Equipment Description Make Capacity Quantity SSB

Unit

1 PTZ Camera Honeywell 124 Nos 2 VIDEO STREAMER AXIS 124 Nos

3 CAMERA POWER SUPPLY LOCAL 124 Nos 4 24 PORT SWITCH D-LINK 9 Nos

5 DATA BASE SERVER (DVM) DELL 1 Nos 6 CAMERA SERVER (DVM) DELL 6 Nos

7 NETWORK ATTACHED STORAGE (NAS) DELL 1 Nos

8 BAS Software 1 Nos 9 DVM Software 1 Nos

Fire Alarm System

Sl. No. Equipment Description Make Capacity Quantity SSB

Unit

1 Smoke Detectors Honeywell 2800 Nos 2 Heat Detectors Honeywell 80 Nos 3 Monitor Module Honeywell 80 Nos 4 Control Relay Honeywell 80 Nos 5 Mnaual Call point Honeywell 250 Nos 6 fault Isolator Module Honeywell 200 Nos 7 Hooter Cum Strobe Honeywell 100 Nos 8 Response Indicator safeway 1200 Nos 9 Fire Alarm Panel Honeywell 3 Nos 10 Repeater Panel Honeywell 2 Nos 11 Auto Dialer Unit Honeywell 1 Nos


52

APPENDIX– D8 LIST OF INVENTORY FOR STATE SECRETARIES BLOCK TOILETS

S.R NO ITEM Unit Qty make SIZE

C.P & SANITARY

1 wall hung W. C Nos 170 Hindware Studio

2 wall hung W. C Nos 100 Hindware Lara

3 Orissa pan W.C Nos 50 Hindware 580x490

4 Wash Basin Nos 270 Hindware round

5 Wash Basin Nos 100 Hindware Oval

6 Wash Basin Nos 24 Hindware HINDWARE

7 sink Nos 9 Nirali 1100x550

8 Urinal Nos 230 Hindware Senso

9 single Lever mixer Nos 24 Jaquar cat - 3075

10 Basin mixer Nos 24 Jaquar Cat - 3001

11 Bottle trap Nos 394 Jaquar Cat - 769

12 Waste coupling Nos 394 Jaquar Cat -709

13 Towel ring Nos 394 Jaquar Cat - 1121

14 Robe Hook Nos 320 Jaquar cat -1191

15 Towel Rod Nos 33 Jaquar Cat - 1111

16 Paper Holder Nos 320 Jaquar Cat -1151

17 Shop Dish Nos 320 Jaquar Cat -1131

18 Pvc Jali Nos 630 Savita 150x150

19 soap Dispenair Nos 24 Jaquar 120x90x100

20 Water Heater Nos 29 Recold

21 Anglecock Nos 748 Jaquar Cat - 053

22 Bib cock Nos 320 Jaquar Cat - 041

23 Shwer arm Nos 24 Jaquar Cat - 483

24 Spout Nos 24 Jaquar cat - 429

25 Pilar cock Nos 394 Jaquar Cat -021

26 Jet spray Nos 320 Jaquar Cat - 563

27 Secretary Block Nos 70 Toilets

28 Secretary Block Nos 10 Public toilet

29 Section Block Nos 8 Public Toilets

30 Minister Block Nos 42 Toilets

31 Lobby 1 Nos 4 Public toilet

32 Lobby 2 Nos 5 Public Toilets

33 Lobby 3 Nos 6 Public toilet



36 Ancialary B Nos 3 Public Toilets

37 Handicraft toilet Nos 33 Public Toilets


53


38 Secretary Block Nos 12 Plumbing Shaft

39 Section Block Nos 2 Plumbing Shaft

40 Minister Block Nos 8 Plumbing Shaft

41 Lobby 1 Nos 1 Plumbing Shaft





46 Ancialary B Nos 1 Plumbing Shaft

47 WATER COOLER NOS 41 VOLTAS

48 WATER SUPPLY

49 150 mm upvc pipe RM 1300 Supreme


51 75 mm upvc pipe RM nil Supreme







58 15 mm copper pipe RM 2500 Maxflow

59 20 mm copper pipe RM 500 Maxflow

60 15 mm Ball valve Nos 80 Zoloto







67 SOIL ,WASTE PIPE

68 75 MM C.I PIPE RM 2900 Hep




72

73 EXTERNAL RAIN WATER LINE




77


54


78 EXTERNAL DRAINAGE SYSTEM

79 RCC PIPES, MANHOLE WITH COVER & FRAMES OF NECO MAKE

80 150 MM RCC PIPE RM 750 PRANALI



83 900X450 CHAMBER NOS 160 NECO

84 MANHOLE/COVER NOS 48 NECO

85 EXTERNAL STORM WATER LINE

86 450 MM RCC PIPE RM 350 Panali

87 600 MM RCC PIPE RM 550 Quality pipes




91 MANHOLE/COVER NOS 140 NECO

92 CATCH BASIN NOS 180

93 300 MM CHANNEL RM 500 Neco

94 450 MM CHANNEL RM 20 Neco

95 SUB HEAD -III (FIRE FIGHITING SYSTEM)

96 Secretary Block NOS 3 FIRE SHAFT

97 Section Block NOS 5 FIRE SHAFT

98 Minister Block NOS 2 FIRE SHAFT

99 Lobby 1 NOS 1 FIRE SHAFT





104 200 MM G.I PIPE RM 2050 TATA









113 SPRINKLER NOS 6500 H.D

114 Butter fly valve 200 mm NOS 16 Audco




55



118 NRV 200 mm NOS 5 C&R




122 Single Hydrant valve NOS 40 shah Bhogilal

123 Double hydrant valve NOS 90 shah Bhogilal

124 Pump / Hydro SYSTEM

125 F.M 200 SYSTEM NOS 1 KIRLOSKER

126 MAIN FIRE PUMP NOS 1 KIRLOSKER

127 MAIN SPRINKLER PUMP NOS 1 KIRLOSKER

128 JOCKY PUMP NOS 2 KIRLOSKER

129 BOOSTER PUMP NOS 8 KIRLOSKER

130 A.C MACOP PUMP NOS 2 KIRLOSKER

131 DISEL ENGINE NOS 1 KIRLOSKER

132 FLUSHING PUMP NOS 1 GRUNDFOSH

133 DOMESTIC PUMP NOS 1 GRUNDFOSH

134 SUMP PUMP NOS 2 GRUNDFOSH

135 WATER TRETMENT PUMP NOS 1 THARMAX

136 R.O PLANT NOS 4 THARMAX

137


56

APPENDIX– D9 INVENTORY OF Interior Decoration Furnishing work

Name of Work:- Interior Decoration work For State Secretariat Building at Naya Raipur (Chhattisgarh).

Work Order No: 1423 /SSB/Int. & Fur./Deco. Work/4-4 /NRDA/09 Raipur, dated: 05 /10/2011 Contract Agreement No.28/ SSB/ Int.Deco. work/ES/4-4/NRDA/11-12, Raipur, dated: 29 /9/2011.

Item No. Description of item Units Qty.

1 2 3 4

1 RELATED CIVIL WORKS

1.2 Wall putty (add wall covering qty) Sqmt 3800.00

1.3 Acrylic primer Sqmt 1250.00

1.4 Acrylic emulsion paint Sqmt 1250.00

1.5 Textured high class matt finish paint Sqmt 98.34

1.6 POP on flooring for floor protection Sqmt 5990.00

2 FURNITURE

2.1.1 CABIN

2.1.1.1 Secretaries Block - Room No: S 5a

A WORKSTATION

A.1 Working table No. 1.00

A.2 Cabinet under working table No. 1.00

A.3 Side unit No. 1.00

A.4 Back credenza No. 1.00

A.5 Side cabinet with AV No. 1.00

2.1.1.3 Secretaries Block - Room No: 30/33-a to 33/33-a

A WORKSTATION






2.1.1.4 Minister’s Block - Room No: 1/12-a to 12/12-a

A WORKSTATION






2.1.1.5 Minister’s Block - Room No.: M7a (Old CM CABIN) / PS to CM

A WORKSTATION

A.1 Working Table No. 1.00



57


1 2 3 4

A.3 Side Unit No. 1.00

A.4 Back Credenza No. 1.00

2.1.1.1.A5 AV unit No. 2.00

A.5 Fabric Magnetic board No. 0.00

B MISC.

B.1 Center table No. 1.00

B.2 Side table No. 2.00

B.4 Planter box No. 5.00

2.1.1.6 Minister’s Block - Room No: 1’/12-a to 12’/12-a

A WORKSTATION






2.1.1.7 Minister’s Block Mr Aman Singh Cabin

A WORKSTATION





1 Side cabinet with AV No. 2.00

2 Planter box No. 4.00

B.1.5 Low Ht. Cabinet-5 No. 1.00

CM CABIN (NEW Room No. M5-7)

E15 Working Table Nos 0.00

A.2 Cabinet under working table Nos 2.00

2.1.1.5.A.3 Back Credenza Nos 2.00

2.1.1.5.A.4 Side Cabinet/Book Shelfs Nos 2.00

2.1.1.4.A.5 AV Cabinet Nos 1.00

B MISC.

B.1 Center table Nos 1.00

B.2 Side table Nos 2.00

B.4 Planter box Nos 8.00

A Minister’s Block - Room No: M8-a (CM SECY.)

A.1 WORKSTATION






58


1 2 3 4



A Minister’s Block - ACS to CM

A.1 WORKSTATION






3.1.2.1 FURNITURE - ANTE ROOM

Secretaries Block - Room No: S5b

A Multipurpose cabinet, table and duco wall panel No. 1.00

B Bed No. 1.00

B Bed for 4 ACS & 2 Secy. No. 6.00

3.1.2.4 Minister’s Block - Room No: 1/12-b to 12/12-b

B Bed No. 13.00

BLOCK: Minister's Block Room No.: 7-b (Old CM room) Basic Cost of veneer: Rs 225/sqft.

B Center table Refer Technical specification no. 5.2.11 Size: 600mm x 600mm x 450mm (ht.)

No. 1.00

C Side table Refer Technical specification no. 5.2.11 Size: 450mm x 450mm x 450mm (ht.)

No. 1.00

D Bed- Refer Technical specification no. 5.2.13 No. 1.00

E Planter box- Refer Technical specification no. 5.2.12, Finish type 2 No. 3.00

E4 Working table with Wardrobe (in Ante room) No. 1.00

E3 Working table with Wardrobe (in Dressing Room) No. 1.00

3.1.2.5.A Study Table No. 1.00


Minister's Block Room No.: Mr Aman Singh

E Planter box- Refer Technical specification no. 5.2.12, Finish type 2 No. 2.00


Minister's Block : NEW CM ANTE-room Basic Cost of veneer: Rs 225/sqft.

E4 Working table with Wardrobe (in Ante room) No. 1.00


3.1.2.5-c Side table No. 2.00

3.1.2.5-d Bed No. 1.00

3.1.2.5-e Planter box No. 3.00


3.1.2.7 BLOCK: Minister’s Block

B Cupboard, Open rack, Glass rack No. 1.00


59


1 2 3 4

3.1 FURNITURE

3.1.3 CONFERENCE AND MEETING ROOM

3.1.3.1 BLOCK: Secretaries Block

Room No: S1

A Conference table – U shape No. 1.00

B Service counter cabinet No. 4.00

D Wall with AV cabinet No. 1.00


Room No: S2



D Wall with AV cabinet No. 1.00


Room No: S3



C Wall with AV cabinet No. 1.00


Room No: S 5j




D Planter box No. 4.00


Room No: M 3a

A Conference table – Rectangular shape No. 2.00




Room No: M 7-k






Room No: M 24a






60


1 2 3 4

3.1.3.8 Minister’s Block- Press conference-Room No: M 3b

A Press conference table (size change) No. 1.00

B AV Cabinet No. 1.00


Room No: M 21

A Conference table – Rectangular shape(refernce with s5j table amount for change drawing)

No. 1.00



3.1 FURNITURE

4.1.4 CAFÉ

3.1.4.1 Block-Secretaries Block

Room No.: S 4a

A Wash basin counter No. 1

B Service counter No. 1

Room No: B 11a

B Service counter No. 2.00

7 FURNITURE

7.1.6 MISCALLANEOUS FURNITURE

A SECTION BLOCK FURNITURE

A.1 Dry pantry No. 72.00

B FOR ALL BLOCKS FURNITURE

B.1 Cabinet

B.1.3 Low ht. Cabinet – 3 No. 120.00

B.1.4 Low ht. Cabinet – 4 No. 20.00

B.1.7 Full ht. Cabinet -1

No. 5.00

B.1.8 Full ht. . Cabinet - 2 No. 5.00

B.1.9 Full ht. Cabinet - 3 No. 15.00

B.1.10 Full ht. Cabinet – 4 No. 30.00

B.1.10 Full ht. Cabinet – 4 Sqmt 132.00

B.2 Working table

B.2.5 Working table 5 No. 28.00

B.3 Loose table

B.3.1 Size: 900mm x 600mm x 450mm (ht.) No. 75.00



B.4 Planter box

B.4.1 Basic coat of veener = Rs 150/sqft No. 125.00

B.4.2 Basic coat of laminate = Rs 50/sqft No. 140.00

8 FINISHES AND MISCELLANEOUS ITEMS


61


1 2 3 4

A WALL PANELING

A.1 Finish type 1 (veener finish)

A.1.1 Finish type 1A Sq.mt 230.04

A.1.2 Finish type 1B Sq.mt 314.72

A.1.3 Finish type 1C Sq.mt 347.25

A.2 Finish type 2 (laminate finish)


A.3 Finish type 3 (fabric finish)


A.4 Finish type 4 (no finish)


B PLY BOXING

B.1 Finish type 1 (veener finish)

B.1.1 Finish type 1A Sq.mt 493.99

B.1.2 Finish type 1B Sq.mt 552.00

B.1.3 Finish type 1C Sq.mt 260.00

B.2 Finish type 2 (laminate finish)


B.3 Finish type 3 (no finish)


C PELMET

C.1 Finish type 1 rmt 2570.57

C.2.1 Finish type 2 (Basic coat of veener = Rs 225 / sqft) rmt 50.04



D EXTENDED FILLER

D.2 Type 2

D.2.1 Finish type 1 Sq.mt 160.21

E GLASS RACK

E.1 Size = 300mm depth Rmt 31.00



F OPEN RACK - TYPE 2 (Veener finish)

F.2 Size = 375mm depth Rmt 11.46

F.3 Size = 450mm depth Rmt 21.37

I WOOD BAND

I.1 75mm wide Rmt 247.84

I.2 100mm wide Rmt. 107.74

I.3 125mm wide Rmt 374.43

I.4 150mm wide Rmt. 44.28


62


1 2 3 4

I.5 200mm wide Rmt. 48.52

L WOODEN FLOOR (INCLUDING SKITING AND TRANSITIONAL STRIP)

L.1 Make and code: ARMSTRONG OR APPROVED EQUIVALENT MAKE Sq.mt 420.58

O WALL COVERING Sq.mt 2814.39

P BLIND

P.1 Roller blind - opaque

P.1.1 Manual control Sq.mt 1465.39

P.2 Roller blind - translucent

P.2.1 Manual control Sq.mt 113.79

P.3 Manual control - handloom bastar art roller blind Sq.mt 1341.55

E1 Foot Rest No. 428.00

E.2 Side cabinet with AV No. 29.00

E3 Working table with Wardrobe No. 15.00

E4 Working table with Wardrobe No. 52.00

E5 Repographic counter No. 72.00

E6 Café Table No. 48

E7 Corian Sq.mt 269.00

E8 Book Shelf Nos. 35.00

E9 Custom made Fabric Sofa No. 60.00

E10 Writing ledge (450mm wide) Rmt. 17.76

E11 MATS

E11-A Rubber foot mats Sqmt. 100.00

E11-B Finn mats Sqmt. 108.00

E11-C Plain pvc mat Nos. 396.48

E11-D Synthetic top & rubber base doormat Nos. 120.00

E12 Supplying and fixing of 3M make Frosted Film in required size, shape &design . Sq.mt 700.99

E13 Supplying and installation of 75 x 8mm size Teak wood lipping with polishing as approved by engineer-in-charge. Rmt. 100.00

E14 Library reception Table Nos 1.00

E15 Supplying and installation of CM Table (Size 4700mm x 1150mm x 750mm) as approved by engineer-in-charge.

Nos 1.00

E16 Supplying and installation of CM Floor Reception Table (Size 4000mm x 1575mm x 775mm) as approved by engineer-in-charge.

Nos 1.00

E17 L3 Reception Table Nos 1.00

E18 6mm Glass shutter bookcase laminet finish Sqmt 172.04

E19 FABRIC CURTAIN (M5) Sq.mt. 110.56

E19b FABRIC CURTAIN(M1/M2/M3/M4) Sq.mt. 400.00

E20 Zebra Blinds in CM Cabin Sqmt 30.00

E21 DUST BIN

E21-A Dust bin 10 litres Nos 104.00

E21-B Dust bin 50 litres Nos 50.00


63


1 2 3 4

E21-C Dust bin 80 litres Nos 65.00

E22 Bed Sheet with Pillow & pillow cover Nos 38.00

E23 CARPET Sqm. 78.80

E24 Furniture Accessories

E24-A Link 25 mm Drawer Lock Nos 374.00

E24-B Link 32 mm Wardrobe Lock Nos 349.00

E24-C Link 150 mm Tower Bolt Nos 343.00

E24-D Dorma (XLC1002) Door Closure Nos 12.00

E24-E Dorma (3A C/C 450) Door Handle Set 6.00

E24-F Link Dead Lock with Knob Nos 6.00

E24-G Amul SS Stud Nos 20.00

E26 Providing and fixing Anodised Aluminum work for door,windows,ventilators and partitions and built up standerd tubular and other section of approved make conforming.

K.G. 13815.55

E27 Providing and fixing 5mm thick Toughened glass pane in Anodised Aluminum work for door,windows,ventilators and partitions and built up standerd tubular and other section of approved make conforming.

Sqm. 1341.78

E27 6mm thick Toughened Glass on Table Top Sqmt 0.00

E28 6W LED MIRROR Nos. 9.00

E29 SPOT LIGHT Nos. 32.00

E30 8mm wide aluminium TEE-profile/u-channel Rmt. 0.00

E31 Providing and fixing Wooden/Ply NOTICE Board size 1.50m x 1.20m with Toughened glass shutter with lock complete as per architectural/shop drawing, specification and the direction of engineer-in-charge.

No. 18.00

E32

Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or grade wood particle board conforming to is 12823 grade type 2 ,in paneling fixed in aluminium doors,window shutter and partition frames with c.p. brass/stainless steel screws etc.

Sqm. 660.23

E33 Providing and fixing ad nodized Aluminium framed grill of approved shape ,pattern and design including cutting,bending,hoisting and erecting/fixing to door,window frame or to wall with fixing clips or hold fasteners or bolts and nuts ar per required.

Kg 1066.19

E34 Lift Decoration work LS

C.M. Lift Nos. 1.00

C.S. Lift Nos. 1.00

Lift in L3 (3nos) Nos. 3.00

E35 12mm thick Toughened Glass with eitching GLASS PARTITION in PS cabin including all fitting and finish complete

Sqmt 15.00

Sqm 13.80

E36 Shifting & Reinstallation of Working Tables @ 60% of Original item sqm

Working Table No. 2.00

Side Unit No. 2.00


Back Credenza No. 3.00

Side Unit No. 3.00


64


1 2 3 4

AV Unit No. 4.00


Side Unit No. 1.00

E NIC SECTION

1 Half Glass Ply Door with both side laminet Nos. 9.00

2 VENEER WALL PANELING [Finish type 1B/ Basic cost of Veneer = Rs 150 /Sqft.] Sqm 79.45

3 LAMINATE WALL PANELING [Finish type 2A/Basic cost of laminate (external) = Rs 50 /Sqft.]

Sqm 222.15

4 Main VC Conference table-1 no. 1

5 VC Conference table-2 no. 1

6 Service Counter cabinet no. 6

7 Wall with AV cabinet no. 4

8 Laminate finish PELMET Rmt. 32.35

9 Veneer PELMET Rmt. 4.48

10 Roller Blind - opaque: Sqm 44.85

11 Dry pantry no. 1.00

12 Veneer Finish Planter box (SIO+VC1+VC2) no. 6

13 Laminated Planter box (Hall+Training) no. 4

14 Foot Rest no. 56

15 NIC Cabin Working Table for SIO no. 1.00

16 NIC Cabin Back Credenza no. 1.00

17 NIC Cabin Side Unit no. 1.00

18 Desk In traing Room Size = 1000mm (L) x 450mm(D) x 750mm(H)

Rmt. 20

19 Corian cladding Sqm 5.8

20 Aluminum U Channel/T-profile Rmt. 362

21 Wall covering with Wall Paper Sqm 64.83

22 Wall putty Sqm 64.83

23 Ply boxing (veneer finish type 1B)

(i) TYPE-1: One side Veneer- vc1 3.9x.83 x2 = 4,68, col. (.5+.3)x2.9x2 = 4.64 Total 9.32 sqm

Sqm 9.32

(ii)

TYPE-2: Both side Veneer- SIO cabin 5.82x2.9 - door .9x2.05=15.03 x2 = 30.06 sqm VC1+2 - 7x2.9x2=40.60 Total = 70.66 sqm

Sqm 70.66

(iii)

TYPE-3: One side Veneer & other side Laminate- SIO cabin 5.5x2.9 x 2= 31.90 sqm, Staff cabin 4.9x2.9x2=28.42 way to VC1 [2x2.9x2]-door1x2.05]=9.55 VC1 [.83x3.9]x2=6.47 Total = 76.34 sqm

Sqm 76.34

(iv)

TYPE-4: No finish for wall paper- For Corian= 5.80 Sqm, For Wall Paper = 64.83 For Anutone = 25.44 Total = 96.07 sqm

Sqm 96.07


65


1 2 3 4

24 Ply boxing (laminate finish type 2) Sqm 377.93

25 Wall panelling (Fabric finish type 3) Finish type 3A (Fabric with Anutone accoustic board)Basic cost of fabric = Rs 250 /Sqft. Sqm 25.44

26 Wall panelling Finish type 4A (for Wall paper/Texture) Sqm 64.83

27 Supplying and installation of 6mm thk Table-Glass (Toughened) Sqm 23.30

28 Supplying and installation of Doormat Sqm 22.08

29 Supplying and installation of Dustbins (Big size) Each 4.00

30 Supplying and installation of Dustbins (Small size) Each 16.00

31 Supplying and installation of 2mm thick Vinyl Flooring Sqm 458.50

32 (i) 3M make frosted Glass Film Sqm 33.56

32(ii) 3M make Black Film in Window Sqm 20.25

33 Door Lock No. 9.00

34 Cub-board Lock No. 6.00

35 Tower bolt 150mm linc No. 8.00

36 Drawer Lock No. 31.00

37 Door Closer No. 9.00

38 Door Handle No. 18

39 Wire Manager in Tables No. 25.00

B.2.1 Ply Boxing (laminate finish type 2A) Sq.mt 0.00

A.3.1 Wall panelling (fabric finish type 3) Sq.mt 0.00

B.3.1 Ply Boxing No finish Sq.mt 0.00

P.3 Baster art Roller blind Sqmt 0.00 Supplying and fixing of Blind & other miscellaneous works in Mantralaya Building at Capitol Complex, Naya Raipur.

Item No. Particulars Units Qty . 1 2 3 4

1 Providing & Fixing Verticle blind Sqm 1800.00 2 Providing & Fixing Opaqe Roller blind Sqm 250.00 3 Providing & Fixing Translucent Roller blind Sqm 0.00

4 Providing & Fixing Fabric Curtain P-line/Smooth-line (Basic rate of Fabric is Rs. 350.00 per Sqm.).

Sqm 60.00

5 Providing & Fixing monolithic moulded Plastic seat and back Nos. 335.00

6 Providing and fixing 6mm thick twin wall Semi transparent Polycarbonate compact sheet roofing

Sqm 773.00

7 Providing and fixing Hot finished Seamless Welded Tubes Steel work in tubular structure

Kg 1579.72

8 E-1

Providing & fabrication of Neon Tube Glow Sign Board with painted GI Letters 30 ft x5ft /12ft x2ft, Box size 174 sqft including all necessary fittings & fixtures complete as directed by engineer-in-charge.

One Job 1.00


66

APPENDIX– D10 INVENTORY OF MODULAR FURNITURES

Name of Work:- Designing, manufacturing, supplying, assembling, testing and commissioning of modular workstation (Modular office

Furniture) for Section Block of State Secretariat Building at Naya Raipur (Chhattisgarh).- MOD-1 Work Order No: 635 / SSB/Int. & Fur./PW/B/4-4 /NRDA/09, Raipur, dated : 10 /05/2011 Contract Agreement No 22/SSB/Int. &

Fur./PW/B/4-4 /NRDA/09 Dated : 28.4.2011 [M/s Featherlite Office System (P) Ltd, # 83&88/1, Bangalore-Mysore Road, Hejjala Circle, Ramanagaram Dist (Section Block)]

Item No.

Description of item Units Qty.

1 2 3 4 All rates are inclusive of all tax components, duties, delivery, etc. . Designing, manufacturing, supplying, assembling, testing and commissioning of modular

office furniture.

1 MODULAR WORKSTATION 1.1 Modular Workstation Type 1

1.1.1 One person cluster - 1A (Section general staff) Nos. 48 1.1.2 Two person cluster(type -1) - 1B (Section general staff ) Nos. 111

1.1.3 Two person cluster(type -2) - 1C (Section general staff) Nos. 140

1.1.4 Four person cluster - 1D (Section general staff) - Nos. 104 1.2 Modular Workstation Type 2

1.2.1 One person cluster - 2A (Section Head) Nos. 31 1.2.2 Two person cluster - 2B (Section Head) Nos. 28 1.2.3 One person cluster - 2C (cabin executive) Nos. 102 1.3 Modular Workstation Type 3

1.3.1 One person cluster - 3A (room executive) Nos. 36 2 Filing cabinet - 4A - Nos. 263 3 Loose table - 5A Rmt. 147 4 Partition - 6A Nos. 850 5 Door - 7A Nos. 112 6 CPU trolley- 8A Nos. 485 7 Keyboard Drawer - 9A Nos. 485 8 Name tag - 11A Nos. 935


67

Name of Work:- Designing, manufacturing, supplying, assembling, testing and commissioning of modular workstation (Modular office Furniture) for Ancillary A&B, Ministry & Secretary blocks of State Secretariat Building at Naya Raipur.- MOD-2

Work Order No: Work Order No: 1116 /SSB/Mod-2/PW/B/4-4 /NRDA/11, Raipur, dated: 29.7.2011 Contract Agreement No. 26 /SSB/Int. & Fur./Mod-2/B/4-4 /NRDA/11-12, Dated : 26.7.2011 [De Bono Flexcom(I) Ltd., Kukreja House, 1st Floor, 46, Rani Jhansi Road, New Delhi]


1 2 3 A MODULAR FURNITURE

A.1.1 Modular Workstation WS2 Nos. 18 A.1.2 Modular Workstation WS4 Nos. 15 A.1.3 Modular Workstation WS5 Nos. 261 A.1.4 Modular Workstation WS6 Nos. 46 A.1.5 Modular Workstation WS7 Nos. 4 A.1.6 Modular Workstation WS8 Nos. 18 A.1.7 Modular Workstation WS9 Nos 30 A.1.8 Modular Workstation WS10 Nos. 55 A.1.9 Modular Workstation WS11 Nos. 3 A.1.10 Modular Workstation WS12 Nos. 3 A.1.11 Modular Workstation WS13 Nos. 37 A.1.12 Modular Workstation WS14 Nos. 25 A.1.13 Modular Workstation WS16 Nos. 2 A.1.14 Modular Workstation WS17 Nos. 2 A.1.15 Modular Workstation WS18 Nos. 1 A.1.16 Modular Workstation WS19 Nos. 9 A.1.17 Modular Workstation WS20 Nos. 1 A.1.18 Modular Workstation WS22 Nos. 34 A.1.18 Modular Workstation WS25 Nos 1 A.1.19 Modular Workstation WS26 Nos. 10 A.1.20 Modular Workstation WS27 Nos. 1 A.1.21 Modular Workstation WS28 Nos. 5

B Loose Table

B.1 Made up of prelaminate particle board top & powder coated CRCA Size = 450mm(H)

B.1.1 Loose table TL1 Size = 450mm dia, single leg support Nos. 105 B.1.2 Loose table TL2

Nos. 176 Size = 450mm(L) x 450mm(B) , single leg support

B.1.3 Loose table TL3 Nos. 150

Size = 900mm(L) x 600mm(B), four leg support B.1.4 Loose table TL4

Nos. 189 Size = 600mm(L) x 600mm(B), four leg support

B.2 Made up of prelaminate particle board top & anodized CRCA Size = 730-750mm(H), four leg support

B.2.1 Loose Table TH1 (library table) Nos 5 B.2.2 Loose Table TH2 (library table) Nos 35 B.2.3 Loose table TH4

Nos. 45 Size = 900mm(L) x 600mm(B)

B.2.4 Loose table TH5 Nos. 5

Size = 1200mm(L) x 600mm(B) F Providing 4A Size Filing cabinet size-Width=450-500mm, Height=1300-1350mm,

Depth: 600-650mm, Construction: Rigid Knock down Construction, Material: CRCA, 0.7 mm Thick --

Nos. 250

G Providing CPU trolley (with expandable width) shall be of 1.5mm thick steel of approved size and colour. The sheet should be powder coated on all surfaces. The

Nos 534


68

trolley should move on 4 castors with locking mechanism.

H Providing Keyboard Drawer with foldable mouse padded tray shall be of 0.8mm thick steel of approved size and colour. The trays shall be mounted on telescopic channels of ball bearing type mounted on the underside of the worktop

Nos 534

I Providing Name tag shall be made up of acrylic sheet with slide in facility of paper name card of size=75x175mm. The Name tag shall be fixed to workstations by both side adhesive tape (3M equivalent make)

Nos 550


69

APPENDIX– D11 INVENTORY OF STORAGE COMPACTORS

Name of Work:- Designing, manufacturing, supplying, assembling, testing and commissioning of COMPACTORS, LIBRARY RACKS, TABLE, MODULAR STORAGE CABINETS & SLOTED ANGLE ADJUSTABLE STORAGE RACKS FOR State Secretariat Building at Capitol Complex, Naya Raipur..- MOD-3

Work Order No: Work Order No:1588/ MOD-3/Engg. Section/NRDA/2011-12,, Raipur, dated: 26 /11/2011Contract Agreement No: 35/ SSB/Mod-3/PW/B/4-4 /NRDA/2011-12 Raipur, dated: 24/11/2011. [Kompress (India) Pvt. Ltd. 39/202, Maryland Corner Sion (E) Mumbai]

Item No. Description of item Units Qty. 1 2 3 4 All rates are inclusive of all tax components, duties, delivery, etc. 1 COMPACTORS

1.1 Compactor at Section Block 1.1.1 Compactors - 1 (SL + 1 No. TM + SS), 2 Bay Nos. 75 1.1.3 Compactors - 3 (SL + 3 No. TM + SS), 2 Bay Nos. 44 1.1.4 Compactors - 4 (SL + 4 No. TM + SS), 2 Bay Nos. 43 1.1.5 Compactors - 5 (SL + 5 No. TM + SS), 2 Bay Nos. 1 1.2 Compactor at Minister Block

1.2.1 Compactors - 2 (SL + 2 No. TM + SS), 2 Bay Nos. 1 1.1.3 Compactors - 3 (SL + 3 No. TM + SS), 2 Bay Nos. 1 1.2 Compactor at Sectariat Block

1.2.1 Compactors - 2 (SL + 2 No. TM + SS), 2 Bay Nos. 1 1.3 Compactor at Ancillary Block

1.3.1 Compactors - 3 (SL + 3 No. TM + SS), 2 Bay Nos. 3 1.3.2 Compactors - 6 (SL + 6 No. TM + SS), 3 Bay Nos. 5 1.3.3 Compactors - 8 (SL + 8 No. TM + SS), 2 Bay Nos. 1

2 RACKS for Ancillary block 2.1 CR1 - Both Side accesable oper rack for library Nos. 70 2.2 CR2 - BOOKCASE NOS. 210 2.5 CR5 - Metal Locker Nos. 20 2.8 CR8 - boltless T-post racks Nos. 350 3 CAFÉ TABLE

3.1.1 CAFÉ TABLE - 750mm x 750 MM X 750 MM(H) Nos. 1 3.1.2 CAFÉ TABLE - 900mm x 750 MM X 750 MM(H) Nos. 3 3.1.3 CAFÉ TABLE - 2250mm x 750 MM X 750 MM(H) Nos. 2

4 NIC-Section (Deposit Work) 4.1.1 Compactors - 3 (SL + 3 No. TM + SS), 2 Bay Nos. 1 4.1.2 Compactors - 4 (SL + 4 No. TM + SS), 2 Bay Nos. 1


70

APPENDIX– D12 INVENTORY OF SOFAS& CHAIRS

Name of Work:- Designing, manufacturing, supplying, assembling, testing & commissioning of office chairs and sofas for State

Secretariat Building at Capitol Complex, Naya Raipur.- MOD-4 & 05 [Office Chair, Sofa, (PART- 2 BOQ-3 ONLY FOR BALANCE CHAIRS)

(1) Work Order No: Wipro Limited, Work Order No: 1678/Int & Fur/Mod-4/ES/NRDA/2011-2012, Raipur, dated: 15 /12/2011 Contract Agreement No. 36/ In t& Fur/Mod-4/ES/NRDA/2011-2012, Raipur, dated: 14/12/2011.

(2) Godrej & Boyce Mfg. Co. Ltd (sofas), Work Order No: 319 /Int&Fur/Mod-4/ES/NRDA/2011-2012, Raipur, dated: 03 /03/2012 Contract Agreement No: 44/ Int&Fur/Mod-4/ES/NRDA/2011-2012,Dated: 29 /2/2012.

(3) Godrej & Boyce Mfg. Co. Ltd ([Mod4- PART- 2 BOQ-3 ONLY FOR BALANCE CHAIRS), Work Order No: 768 /Int&Fur/Mod-4/GC/ES/NRDA/2011-2012, Raipur, dated: 05 /06/2012 Contract Agreement No: 07/ Int&Fur/Mod-4/GC/ES/NRDA/2011-2012, Dated: 01/6/2012.(Part-2 BOQ3 only for Balance Chairs).

(4) Work order No: 1468/Int & Fur/Mod-5/EEC1/NRDA/2012-2013, Raipur, dated: 10/ 10 /2012 Contract Agreement No. 17 /Int&Fur/Mod-5/EEC1/NRDA/2012-2013, Raipur, dated: 10 /10/2012 [Mod-5 Part-1 De Bono Flexcom(I) Ltd]

(5) Work order No: 1470/Int & Fur/Mod-5/EEC1/NRDA/2012-2013, Raipur, dated: 10/ 10 /2012 Contract Agreement No. 18 /Int&Fur/Mod-5/EEC1/NRDA/2012-2013, Raipur, dated: 10 /10/2012 [Mod-5 Part-2 De Bono Flexcom(I) Ltd]

INVENTORY OF SOFAS&CHAIRS

SI. No.

ITEM Unit Qty Make

1 RCS 1 CANDID - NYLON CASTOR/NYLON BASE/SYNCRO-1/FIXED ARMREST

Nos. 1361 Wipro

2 RCS 2 SMART MID-HIGH BACK- NYLON CASTOR/NYLON BASE/SYNCRO-1/ FIXED ARMREST

Nos. 132 Wipro

3 RCS 3 SMART MID-BACK- NYLON CASTOR/NYLON BASE/SYNCRO-1/ FIXED ARMREST

Nos. 213 Wipro

4 RCC1- Conference Revolving Chair NYLON CASTER/ NYLON BASE/SYNEBRO-1/FIXED ARM REST

Nos. 98 Wipro

5 RCC2- Conference Revolving Chair NYLON CASTER/ NYLON BASE/SYNEBRO-1/FIXED ARM REST

Nos. 60 Wipro

6 RCC3 SMART MID-HIGH BACK- NYLON CASTOR/NYLON BASE/SYNCRO-1/ FIXED ARMREST

Nos. 66 Wipro

7 FCV 1 SMART VISITOR CHAIR Nos. 952 Wipro

8 FCV 2 SMART VISITOR CHAIR Croome plated.

Nos. 674 Wipro

9 FCV-3 Annexe training Chair Nos. 30 Wipro

10 FCC 2 Smart Visitor Conference Chair Nos. 241 Wipro

11 FCCF1 SPICE CHROME PLATED Nos. 170 Wipro

12 FCCF2 Annexe visitor Nos. 40 Wipro

13 FCC1 SMART VISITOR WITH DELTA FBX Nos. 108 Wipro


71

14 FCW1 2SEATER METAL PERFORATED Nos. 177 Wipro

15 FCW2- 3SEATER METAL PERFORATED Nos. 199 Wipro

16 FCV3-MODULAR REVOLVING / Fixed OFFICE CHAIR Front- Black color pure leather Back- Black Color Matching leatherette Power Coating- Silver

Nos. 136 De Bono

17 RCS4 Nos. 90 Godrej


19 RCV1/FCC2 Nos. 318 Godrej


21 RCC5 Nos. 19 Godrej

22 Very High Back Chair Camel Leather Nos. 1 Godrej

23 High Back Revolving Chair Camel Leather Nos. 8 Godrej

INVENTORY OF SOFAS

No. ITEM Unit Qty Make 1 1- TYPE 2 ( 1) Single Seater

Dalpina One Seater (Coffee Brown Color-4) (Black-17, Mushroom-12, Coffee Brown-0) 12M1 meeting/12M1 Ar/CS Waiting/ 4 ACS/ AR+1 Waiting of S to CM

Nos. 33 Godrej

2 2- TYPE 2- (2) DOUBLE SEATER Dalpina Two Seater (Orange 157, Mushroom-34, Black-33, Coffee Brown-12 )

Nos. 236 Godrej

3 3- TYPE 2 ( 3) Three Seater Dalpina three Seater (Black-8) CM Lobby (GR+5)+3 Waiting of PS/S to CM (1)

Nos. 8 Godrej

4 4- TYPE 3 (1) Dlima 1st (Black) 42 No.

Nos. 42 Godrej

5 5- TYPE 3 (2) Dlima 2st (Black)54 No.

Nos. 50 Godrej

6 6- TYPE 4 (2) DOUBLE SEATER Spacer Two Seater (Synthetic leather brown)-6 nos)

Nos. 6 Godrej

7 Jineiro 2 STR Sofa Fab LtH Nos. 3 Godrej 8 Jineiro 1 STR Sofa Fab LtH Nos. 1 Godrej 9 Headden Dining Table Nos. 2 Godrej 10 Tia Dining Chair Nos. 8 Godrej 11 Leoma Mid Back Nos. 20 Godrej 12 Leoma Visitor Nos. 14 Godrej 13 Supplying and installation COUCH (Size

1500mm x 1000mm x 900mm) as approved by engineer-in-charge-

Nos. 31 Godrej


72

APPENDIX– D13 INVENTORY OF SIGNAGE & NAME PLATES.

NAME OF WORK :- ROVIDING & FIXING OF SIGNAGES AND NAME PLATES FOR STATE SECRETARIAT BUILDING AT CAPITOL COMPLEX, NAYA RAIPUR-

Work Order No. : 772 /SIGNAGE-SSB/ES/NRDA/2012Dated: 5/6/12 CA No. 06 /SIGNAGE-SSB/ES/NRDA/2012, dtd.: 5 /5 /12 Fiberfill Engineers

Sl. No. Particulars Units Qty.

1 2 3 4

1 Supplying and fixing in position of Room Name Plates with ACP Size 400x112mm and acrylic size 450x200mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. RNP

Each 401

2 Supplying and fixing in position of Way finding Room No. Sign. Plate with ACP Size 381x105mm and acrylic size 450x200mm along with printed film with text and traditional design proposed by consultant and technical specification T-1.99- WRNSP

Each 99

3 Supplying and fixing in position of signages with ACP Size 362x370mm and acrylic size 450x600mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. Cafete area sign plate

Each 2

4 Supplying and fixing in position of signages with ACP Size 200x300mm and acrylic size 300x350mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. Toilets sign plate

Each 99

5 Supplying and fixing in position of signages with ACP Size 423x116mm and acrylic size 500x233mm along with printed film with text and traditional design proposed by consultant and technical specification T-1.Other Services sign plate

Each 19

6 Supplying and fixing in position of signages with ACP Size 354x370mm and acrylic size 450x550mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. Emergency sign plate

Each 104

7 Supplying and fixing in position of signages with ACP Size 354x440mm and acrylic size 450x647mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. Lift & stair sign plate

Each 74

8 Supplying and fixing in position of signages with ACP Size 362x370mm and acrylic size 450x600mm along with printed film with text and traditional design proposed by consultant and technical specification T-1.Drinking Water sign plate

Each 39

9 Supplying and fixing in position of signages with ACP Size 354x440mm and acrylic size 450x647mm along with printed film with text and traditional design proposed by consultant and technical specification T-1.Ramp sign plate

Each 43

10 Supplying and fixing in position of signages with ACP Size 400x35mm and acrylic size 450x200mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. Maintenance Room sign plate

Each 77

11 Supplying and fixing in position of signages with ACP Size 500x452mm and acrylic size 500x206mm along with printed film with text and traditional design proposed by consultant and technical specification T-1.Conference Room sign plate

Each 3

12 Supplying and fixing in position of signages with ACP Size 814x156mm and acrylic size 900x497mm along with printed film with text and traditional design proposed by consultant and technical specification T-1. Block finding sign plate

Each 5

13 Supplying and fixing in position of signages with ACP Size 541x130mm and acrylic size 600x262mm along with printed film with text and traditional design proposed by consultant and technical specification T-1.Security Pass sign plate

Each 270

14 Supplying and fixing in position of signages with ACP Size 600x1093mm and acrylic size 900x1500mm along with printed film with text and traditional design proposed by consultant and Each 45


73

technical specification T-1. Floor directory sign plate

15 Supplying and fixing in position of signages on stainless steel plate of size 180x60 with black embossed lettering .SS Room no. plate Each 753

16 Supplying and fixing in position of Digital signage panel with integrated includingn hanging plates and all necessary hardware complete of LG Make as per technical specification T-2. DS Each 3

E1 Extra for providing and fixing on the back side ACP of size 362x370 and film including printing on acrylic area 450x600mm in item no.10 Drinking water signages plate as per direction and approval of engineer-in-charge. (Drinking Acrylic)

Each 24

E2

Extra for providing and fixing hanging arrangements of stainless staeel hanger with ornamental nob and SS Plate grade-304, brush finished with necessary hanging arrangement and stainless steel screws complete as per direction and approval of engineer-in-charge in place of wrought iron bracket as per BOQ technical specification T-2 (SS. Hanger)

Each 24

E3

Providing and installing retro-reflective Single Sided Shoulder mounted signboards comprising of customised modular PU Epoxy Coated MS Angle iron frame work, aluminum composite panel (ACP) as base board, micro prismatic retro reflective sheet and electro cut coloured overlay film. The horizontal and vertical members of the MS frame module shall be made of MS SHS iron 50x50x3.6mm. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS SHS iron 50x50x3.6mm. The MS frame module shall have length not more than 3M. The aluminum composite panel (ACP) shall have a thickness of 4 mm with 0.5 mm thick skin of aluminum of both sides. The ACP shall be routed, folded and fixed on the MS frame with VHB tape 25 mm wide provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300 mm centre to centre on one side of frame ensuring that no riveting is seen on the front face of the frame. On the front face of the ACP, Micro prismatic retro-reflective sheet conforming to Type-XI of ASTM: D 4956-07 shall be pressure fixed as background sheet (in white colour) which will be over laid with electro - cut transparent film of approved make and colour of create a desired Directional Signages. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation on two vertical post complete including fixing in foundation concrete complete as per the direction and approval of Engineer-in-charge.- DSM(Big)

Each 2

E4

Extra for providing and installing retro-reflective Single Sided Shoulder mounted signboards comprising of customised modular PU Epoxy Coated MS Angle iron frame work, aluminum composite panel (ACP) as base board, micro prismatic retro reflective sheet and electro cut coloured overlay film. The horizontal and vertical members of the MS frame module shall be made of MS SHS frame 50x50x3.6mm. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS SHS 50x50x3.6mm. The MS frame module shall have length not more than 3M. The aluminum composite panel (ACP) shall have a thickness of 4 mm with 0.5 mm thick skin of aluminum of both sides. The ACP shall be routed, folded and fixed on the MS frame with VHB tape 25 mm wide provided through out the length and breadth of the frame. On the front face of the ACP, Micro prismatic retro-reflective sheet conforming to Type-XI of ASTM: D 4956-07 shall be pressure fixed as background sheet (in white colour) which will be over laid with electro - cut transparent film of approved make and colour of create a desired Directional Signages. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation on two vertical post complete including fixing in foundation concrete complete as per the direction and approval of Engineer-in-charge. DSM(Small)

Each 6


74

APPENDIX– D14 INVENTORY OF AUDIO-VISUAL SYSTEMS

Name of Work:- DESIGNING, SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF AUDIO VISUAL SYSTEM OF STATE SECRETARIAT BUILDING AT CAPITOL COMPLEX, NAYA RAIPUR, (CHHATTISGARH)

Work Order No: Contract Agreement No. 09/AV-SSB/ES/NRDA/2012-13 Raipur Dated 22.6.2012 Work Order 859/AV- SSB/ES/NRDA/2012 Raipur 22.6.2012. [AV Science & Technologies Pvt. Ltd.,]

SI. No. ITEM Unit Qty Remarks

1 2 3 4 5 1 FOR CONFERENCE ROOM S1 2 Display Devices Make &

Specifications attached below.

3 Matrix display (For Front wall) No. 1 4 LCD Display 47" No. 2 5 Mounting Bracket No. 1 5 Mounting Bracket (For LCD (LED Backlit)

Display) No. 2

6 Control Devices 7 Switcher-cum-Scalar No. 1 8 Matrix Switcher No. 1 9 Digital Twisted Pair Tx No. 8 10 Digital Twisted Pair Rx No. 5 11 Analog Twisted Pair Transmitter No. 20 12 Table Interface AND service Equipment System 13 Table box No. 18 14 VGA + A patch cable No. 12 15 HDMI Patch Cable No. 21 16 Control System 17 Control System No. 1 18 Wireless Touch panel No. 1 19 Wireless Router for Touch Panel No. 1 20 Audio Devices 21 Microphones 22 Wireless Handheld Microphone No. 0 23 Wireless Lapel Microphone No. 1 24 Conference Controller No. 1 25 Chairman Microphone No. 1 26 Delegate Microphone No. 28 27 Connecting Cables-8 feets No. 32 28 Amplifiers and Speakers System 29 Audio DSP No. 1 30 FOH Speaker No. 2 31 Ceiling Speakers No. 8 32 Audio Amplifier No. 1 33 Audio Amplifier No. 1 34 Services 35 Equipment Rack No. 1 36 FOR CONFERENCE ROOM S2 37 Display Devices


75

SI. No. ITEM Unit Qty Remarks 1 2 3 4 5 38 4000 ANSI Lumens Projector with ceiling

Mount No. 1

39 119" Motorized screen No. 1 40 Control Devices 41 Switcher-cum-Scalar No. 1 42 Digital Twisted Pair Tx No. 2 43 Digital Twisted Pair Rx No. 2 44 Table Interface AND service Equipment System 45 Table box No. 3 46 VGA + A patch cable No. 2 47 HDMI Patch Cable No. 5 48 Control System 49 Control System No. 1 50 Wireless Touch panel No. 1 51 Wireless Router for Touch Panel No. 1 52 Audio Devices 53 Microphones 54 Wireless Handheld Microphone No. 0 55 Wireless Lapel Microphone No. 1 56 Conference Controller No. 1 57 Chairman Microphone No. 1 58 Delegate Microphone No. 14 59 Connecting Cables-8 feets No. 17 60 Amplifiers and Speakers System 61 Audio DSP No. 1 62 FOH Speaker No. 2 63 Ceiling Speakers No. 6 64 Audio Amplifier No. 1 65 Services 66 Equipment Rack No. 1 67 FOR CONFERENCE ROOM S3 68 Display Devices 69 Commercial Display Monitor 65" No. 1 70 Mounting Bracket No. 1 71 Table Interface AND service Equipment System 72 Table box No. 2 73 VGA + A patch cable No. 2 74 HDMI Patch Cable No. 1 75 Switcher-cum-Scalar No. 1 76 Audio Devices 77 Conference Controller No. 1 78 Wireless Handheld Microphone No. 1 79 Wireless Lapel Microphone No. 7 80 Chairman Microphone No. 1 81 Delegate Microphone No. 8 82 Wall Mount Speaker No. 2 83 Mixing Amplifier No. 1 84 Connecting Cables-8 feets No. 10


76

SI. No. ITEM Unit Qty Remarks 1 2 3 4 5 85 Equipment Rack No. 1 86 FOR CABIN S5a 87 Display Devices 88 LCD (LED Backlit) Display 42" No. 0 89 Mounting Bracket No. 1 90 LCD (LED Backlit) Display 47" No. 1 91 VGA + A patch cable No. 1 92 Services 93 AV Face plate No. 1

94 FOR CONFERENCE ROOM S5j 95 Display Devices 96 Matrix Display - Video Wall (For Front wall) No. 1

97 LCD (LED Backlit) Display 47" No. 2 98 Mounting Bracket FOR MATRIX DISPLAY No. 1 99 Mounting Bracket (For LCD (LED Backlit)

Display) No. 2

100 S.I.T.C. of Mitsubishi WD 385U-EST interactive DLP Projector.

No. 1

101 S.I.T.C. of Draper Baronet Motorized Projection Screen Size 5 feet X 7 feet

No 1

102 S.I.T.C. of Liberty ST- 1200 Mounting Bracket for Projector.

No. 1

103 S.I.T.C. of Liberty Make wall Mounting Bracket for Projection Screen.

No. 1

104 Control Devices 105 Matrix Controller No. 1 106 Matrix Switcher No. 1 107 Digital Twisted Pair Tx No. 9 108 Digital Twisted Pair Rx No. 4 109 Table Interface AND service Equipment System 110 Table box No. 9 111 VGA + A patch cable No. 7 112 HDMI Patch Cable No. 21 113 Control System 114 Control System No. 1 115 Wireless Touch panel No. 1 116 Wireless Router for Touch Panel No. 1 117 Lighting Control No. 1 118 Dimmable Ballasts No. 15 119 Video Conferencing System 120 HD Video Conferencing System No. 1 121 Secondary Ceiling Mounting Camera No. 1 122 Audio Devices 123 Microphones 124 Wireless Handheld Microphone No. 2 125 Wireless Lapel Microphone No. 1 126 Conference Controller No. 1


77

SI. No. ITEM Unit Qty Remarks 1 2 3 4 5

127 Chairman Microphone No. 1 128 Delegate Microphone No. 14 129 Connecting Cables-8 feets No. 19 130 Amplifiers and Speakers System 131 Audio DSP No. 1 132 FOH Speaker No. 2 133 Ceiling Speakers No. 8 134 Audio Amplifier No. 1 135 Audio Amplifier No. 1 136 Services 137 Equipment Rack No. 1 138 FOR CONFERENCE ROOM M3a 139 Display Devices 140 Commercial Display Monitor 65" No. 1 141 Mounting Bracket No. 1 142 Control Devices 143 Switcher-cum-Scalar No. 1 144 Table box No. 3 145 Control System 146 Control System No. 1 147 Wireless Touch panel No. 1 148 Wireless Router for Touch Panel No. 1 149 VGA + A patch cable No. 2 150 Services 151 Equipment Rack No. 1 152 FOR PRESS CONFERENCE ROOM M 3 B 153 Display Devices 154 Commercial Display Monitor 65" No. 0 155 Mounting Bracket No. 1 156 LCD (LED Backlit) Display 42" No. 1 157 Control Devices 158 Switcher-cum-Scalar No. 1 159 Table box No. 1 160 VGA + A patch cable No. 1 161 HDMI Patch Cable No. 1 162 Audio Devices 163 Microphones 164 Wireless Handheld Microphone No. 3 165 Wireless Lapel Microphone No. 1 166 Conference Controller No. 1 167 Chairman Microphone No. 1 168 Delegate Microphone No. 2 169 Connecting Cables-8 feets No. 3 170 Connecting Cables-33 feets No. 1 171 Amplifiers and Speakers System 172 Audio DSP No. 1 173 FOH Speaker No. 2 174 Ceiling Speakers No. 4


78


175 Audio Amplifier No. 1 176 Services 177 Equipment Rack No. 1 178 FOR CABIN M7a 179 Display Devices 180 Commercial Display Monitor 65" No. 3 181 LCD (LED Backlit) Display 47" No. 1 182 LCD (LED Backlit) Display 42" No. 2 183 Mounting Bracket No. 6 184 Services 185 AV Face plate No. 1 186 FOR CM Conference M 21 187 Matrix display (For Front wall) No. 1 188 Mounting Bracket No. 1 189 Commercial Display Monitor 65" No. 0 190 Mounting Bracket No. 0 191 Control Devices 192 Switcher-cum-Scalar No. 1 193 Digital Twisted Pair Tx No. 2 194 Digital Twisted Pair Rx No. 2 195 Table box No. 3 196 VGA + A patch cable No. 2 197 HDMI Patch Cable No. 5 198 Control System 199 Control System No. 1 200 Wireless Touch panel No. 1 201 Wireless Router for Touch Panel No. 1 202 Microphones 203 Wireless Lapel Microphone No. 1 204 Conference Controller No. 1 205 Chairman Microphone No. 1 206 Delegate Microphone No. 8 207 Connecting Cables-8 feets No. 13 208 Audio DSP No. 1 209 FOH Speaker No. 2 210 Ceiling Speakers No. 6 211 Audio Amplifier No. 1 212 Services 213 E.1 Equipment Rack No. 1 214 FOR CONFERENCE ROOM M24a 215 Display Devices 216 Matrix display (For Front wall) No. 1 217 Mounting Bracket No. 1 218 Commercial Display Monitor No. 0 219 Mounting Bracket No. 0 220 Control Devices 221 Switcher-cum-Scalar No. 1 222 Digital Twisted Pair Tx No. 2


79


223 Digital Twisted Pair Rx No. 2 224 Table box No. 3 225 VGA + A patch cable No. 2 226 HDMI Patch Cable No. 5 227 Control System 228 Control System No. 1 229 Wireless Touch panel No. 1 230 Wireless Router for Touch Panel No. 1 231 Audio Devices 232 Microphones 233 Wireless Lapel Microphone No. 1 234 Conference Controller No. 1 235 Chairman Microphone No. 1 236 Delegate Microphone No. 14 237 Connecting Cables-8 feets No. 20 238 Amplifiers and Speakers System 239 Audio DSP No. 1 240 FOH Speaker No. 2 241 Ceiling Speakers No. 6 242 Audio Amplifier No. 1 243 Services 244 Equipment Rack No. 1 245 FOR CONFERENCE ROOM 7k, CABIN S1/33a-S33/33a, CABIN M1'/12a-

M12'/12a, CABIN M1/12a-M12/12a, CABIN M8a, CABIN M9a, ANTE RM S5b, ANTE RM M7b, Secretary café

246 Display Devices 247 LCD (LED Backlit) Display 42" No. 22 248 LCD (LED Backlit) Display 32" No. 50 249 Mounting Bracket No. 72 250 Services 251 AV Face plate No. 0 252 Cables & Connectors (Imported cables, RCA, VGA, Audio) 253 Five Conductor High Resolution Cable Rmt. 402 254 Two Conductor High Resolution Cable Rmt. 111 255 Speaker Cable Rmt. 775 256 Microphone Cable Rmt. 363 257 Control Cable Rmt. 225 258 Shielded Twisted Pair CAT5 cable Rmt. 0 259 Connectors Lot 1 260 Extra Items AS PER RAA 261 Supplying & Laying of Cables for Digital

Transmitter & Receiver to Carry Data, Video & Audio Signals on Cat 5/6 Cable.

Rmt. 1117


80


262 Kramer’s BC-DGka T623 is a Shielded Twisted Pair (STP) Cable designed ideally to match requirements of Kramer’s Twisted Pair Digital Transmitter- receiver Sets to Provide Optimum Range and Performance. All manufactures have their own specially designed cables for digital transmitter & receiver to carry DATA, VIDEO & AUDIO signals on CAT 5/6 cable, as normal CAT 5/6 cables are not suitable for this purpose, due to its delay & resistance specifications.

No. 15

263 Supply & Laying of Cables to Connect the Various Display devices to Source Devices.HDMI-C-HM/HM/PRO-15(15’) The cable is required to connect the various display devices to source devices (PC/LAPTOP/DVD/VC) Scalar, Switcher etc.

No. 16

264 Supply & Laying of Cables to Connect the Various Display devices to Source Devices. HDMI-C-HM/HM/PRO-25(25’) The cable is required to connect the various display devices to source devices (PC/LAPTOP/DVD/VC) Scalar, Switcher etc.

No. 30


No. 9


No. 86

267 Supply & Installation of Brass Gromments for Microphones, in various conference rooms, to enable smooth movement of connecting cables from one mic to the next and conceal the opening made in the table, for the cables. (Custom Made Brass Grommet)

No. 93

268 Supply & Installation of power socket with metal box set, for providing power supply points at table box locations in various conference rooms, for smooth operation at independent locations, and to minimize wiring complications. Complete set with under mentioned components.Electrical Sockets & Switches (Set) : Legrand Power Socket with Metal Box - Set

No. 24

269 Supply & Installation of 18.5” TFT LCD Monitor to enable function of “Scenario Building”;with Matrix controller.(Benq make )

No. 1


81


270 Tata Sky DTH TV Connection with Set top Box No. 50 271 Supply & Installation of Mitsubishi WD720U

DLP Projector No. 1

272 Supply & Installation of Da-Lite Motorized Screen Size 133-inch Diagonal

No. 1

273 Supply & Installation of ABTUS WiPG-1000 Wireless Presentation Gateway for cable less computer/presentation device connecting to Display device.

No. 2

274 [A] Sub-total-A 275 For NIC as Deposit work 276 Table box No. 7 277 VGA + A patch cable No. 7 278 HDMI Patch Cable No. 7 279 Supply & Installation of ABTUS WiPG-1000

Wireless Presentation Gateway for cable less computer/presentation device connecting to Display device.

No. 2

280 Cables & Connectors (Imported cables, RCA, VGA, Audio) 281 Five Conductor High Resolution Cable Rmt. 62 282 Two Conductor High Resolution Cable Rmt. 15 283 Speaker Cable Rmt. 42 284 Microphone Cable Rmt. 82 285 Control Cable Rmt. 115


82

Subject: SITC of PA System, Annual Operation, Repairing & Maintenance of Audio-Visual System for Mantralaya

Mahanadi Bhawan Naya Raipur Reference: Work Order No: 1192 / Mantralaya-MD/EEC1 / CE (E) / NRDA / 2014-15, Raipur, dated: 24/ 12 /2014

Contract Agreement No. 32 /AV-AMC/ Mantralaya-MD/EEC1 / CE (E) / NRDA / 2014-15 dtd. 19/12/2014

[Surabhi Enterprises,Raipur] *****

Technical SPECIFICATIONSGENERAL:Manufacturer Specification of each items. Sl. No. Item No. Item of work (Description of item) Qty. Remark

1 2 3 4 5

PART-1 : DESIGNING, SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING of PUBLIC ADDRESS SYTEM

1 A DESIGNING, SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING of PUBLIC ADDRESS SYTEM including following items as per specification and direction of engineer-in-charge-

2

2 1 Paging system package

3 2 Dynamic Vocal Microphone

4 3 All weather outdoor speaker

5 4 Mixing Amplifier

6 5 Speaker Cable 1500

7 6 Audio Cable 50

8 7 Connectors 1

9 8 Equipment Rack 2

10 Sub-total

11 B DESIGNING, SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING of COUNTER COMMUNICATION SYTEM including following items as per specification and direction of engineer-in-charge-

4.00

12 1

Speaker: Condensor Cartridge Unit, Amp Output: 2W or More in each Amplfier, Mic: Minimum Electret Condenser in both the units with Min 20" Long Gooseneck, Amplifier Feature- Auto Mute On required to be Enabled after 30 Seconds (Approx), Power Requirement: AC 220-240 V, 50/60 Hz, Protections Circuit: AC Fuse 1 x 0.5 Amp, Control of Mic: Separate control is required for both Microphones

13

Basic Feature: Two Way Hands Free Communications, Compact & Elegant Table Top Attendent Unit With Minimum 20" long Gooseneck Unit, Priority: Attendent Mic must have voice priority over Client Microphone

14 2 P6A point wiring with necessary swich sockets including all lead and lift in aproved make material. 4

15 Sub-total

16 C

SUPPLYING, INSTALLATION, TESTING, COMMISSIONING AND SERVICEING of DTH HD TV CONNECTION WITH ANTENA & SET-TOP BOX including following items as per specification and direction of engineer-in-charge-

17 1 SET-TOP BOX 10

18 2 CABLES & MOUNTING RACK WITH BRAKET 10

18 PART-2: ANNUAL REPAIR COST OF AUDIO-VISUAL SYSTEM

19 1 PA SYSTEM 1

20 2 AUDIO SYSTEM 1


83

21 3 VIDEO SYSTEM 1

22 4 CABLES & CONNECTORS 1

23 a Five Conductor High Resolution Cable

24 b Two Conductor High Resolution Cable

25 c Speaker Cable

26 d Microphone Cable

27 e Control Cable

28 f Shielded Twisted Pair CAT6 cable

27 g Connectors

28 TOTAL-PART-2 4

29 PART-3 : OPERATIONAL AND MAINTENANCE COST OF AUDIO-

VISUAL SYSTEM INCLUDING CABLE CONNECTIONS

30 1 Manager 1

31 2 Technitian (1 for Tatasky + 1 for AV) 2

32 3 Operators (1 for Tatasky + 1 for conferences) 2

33 4 Helpers 2

34 Sub-total 7

35 PART-3 Total Per annum (for 12 months)

36 PART-4 :EXTRA ITEM

37 E1 Monthly Rechage of Tata Sky DTH TV Connaction 85.00

38 E2 BenQ model no MS 524 OR equivalent make Projector, Brightness 32000 lumens, HDMI, VGA Videeo Input 3D. 4.00

42 E3 Ceiling Mounting Bracket for Projector, Liberty OR equivalent make, 3feet size, model mark-VII

4.00

43 E4 Survira Or equivalent make Manual Projector Screenm Size 5' X 7' 4.00

44 E5 Liberty Or equivalent Make HDMI cable of 15 meter Length cable of 15 meter length.

4.00

45 TOTAL-PART-4


84

APPENDIX– D15 INVENTORY OF VIDEO PROJECTOR & TV SYSTEMS

Name of work: Supply, Installation, Testing & Commissioning of Multimedia Data/Video Projector in Mantralaya,

MahanadiBhawan, Naya Raipur. Reference: NRDA Work Order No. 436 /Projector/Mantralaya-MD/EEC1 / CE (E) / NRDA / 2015-16 dated: 16.7.15, CA No. 07

/Projector /Mantralaya-MD/EEC1 / CE (E) / NRDA / 2015-16 Dtd.: 15/7/2015.[ Surabhi Enterprises, G.E. Road, Raipu] *****

S.No. Item Description Units Qty

1 2 3 4

1 Supply & Installation of 4300 Lumens (Make-Mitsubishi/Model no. WD720U) with Wireless capability OR EQUIVALENT Multimedia Data/Video Projector.

No. 1

2 Supply & Installation of 133" Diagonal size Motorised Screen (make Da-Lite) No. 1

3 Supply & Installation of 4000 Lumens Multimedia Data/Video Projector (Make-Hitachi /Model no. CPX 4015 CN) with Wireless capability OR EQUIVALENT Multimedia Data/Video Projector.

No. 1

4 Supply & Installation of 100" Diagonal (7ft x 5ft) size Motorised Screen (Make Draper Baronet, Liberty, Suvira Etc.)

No. 1

5 Supply & Laying of Cables to Connect the Display devices to Source Devices. HDMI-C-HM/HM/PRO-25(25’) Make: Kramer The cable is required to connect the various display devices to source devices (PC/LAPTOP/DVD/VC) Scalar, Switcher etc.

No. 2

6 VGA Cable 15 mtr Make: Kramer (Contract Item) No. 2

7 Supply & Installation of Liberty ST- 1200 make Mounting Bracket for Projector. No. 2

8 Supply & Installation of ABTUS WiPG-1000 Wireless Presentation Gateway for cable less computer/presentation device connecting to Display device. Make: Belkin, AtBus WiPG etc. No. 2

9

Supply & Installation of power socket with metal box set, for providing power supply points at table box locations in various conference rooms, for smooth operation at independent locations, and to minimize wiring complications. Complete set with under mentioned components.Electrical Sockets & Switches (Set) : Legrand Power Socket with Metal Box - Set

Set 14

10 Supplying & Laying of Cables for Digital Transmitter & Receiver to Carry Data, Video & Audio Signals on Cat 5/6 Cable. Rmt. 50

11

Delegate MicrophoneWith condenser gooseneck mic, illuminated ring and loudspeaker, 15-pin D-Sub Connector, Features Basic Features , Model- MCS 521

No. 10

Modern design plastic housing with non-glare, scratch-resistant Nextel finish, Features Basic Features High-quality gooseneck microphone (including pop screen)

LED to indicate microphone is switched on or off, Features LED Indicator

Dual colour LED to indicate the microphone on / request to talk status, Features LED Indicator Integrated, Wide Band Loudspeaker, Headphone Socket with 3.5 mm Mini Jack Features Loudspeaker Buttons to set the volume Features Buttons Required

DIP switches for addressing and programming the microphone unit Features Buttons Required Ready-to-Talk status of the microphone is indicated by the illuminated red ring and the green LED in the housing. Features Ready to Talk Status Indicator 80 Hz to 19000 Hz, Features Frequency response

Gooseneck Microphone with illuminated ring .Features Microphone Type

Cardioid, Features Polar pattern

Condenser (back electret) .Features Transducer type

0° C to +50° C Features Temperature range

12 Connecting cable with 8-pin Renk-connector, length 2.5 m (8 ft.). Modal- Krammer No. 10

13 Supply & Installation of Brass Gromments for Microphones, in conference rooms, to enable smooth No. 10


85

movement of connecting cables from one mic to the next and conceal the opening made in the table, for the cables. (Custom Made Brass Grommet), Modal-. Brass

Name of work: Supply, Installation, Testing & Commissioning of 55 Inch LED TV (Monitor) at Mantralaya, Mahanadi Bhawan, Naya Raipur.

Reference: . NRDA Work Order No. 438 / LED TV-Mantralaya-MD / EEC1/ CE (E) / 2015-16, dated: 16.7.15, CA No. 08 / LED TV-Mantralaya-MD / EEC1/ CE (E) / 2015-16 Dtd. 15/7/2015.[ Surabhi Enterprises, G.E. Road, Raipur]

***** Sl. No. Item of work (Description of item) Unit Qty.

1 2 3 4

1

Supply, Installation, Testing & Commissioning of approved make 55 inch LED TV (Monitor) with Embedded Media Player, Analogue & Digital Connectivity, Ethernet/ RS232 Remote Control, Auto Brightness Sensor, Smart Scheduling, Landscape or portrait mode. PANEL'S : Diagonal size 55, type 120HzLED BLU Resolution 1920X1080 (16:9), Pixel Pitch (mm) 0.21(H)X0.63(V), Active Display Area (mm) 1209.6(H)X680.4(V), Brightness (Typ.) 350nit, Contrast Ratio 5000:1. CONNECTIVITY: INPUT RGB Analog D-SUB, DVI-D, VIDEO Component, CVBS, HDMI, AUDIO Stereo Mini jack. OUTPUT AUDIO Stereo mini jack. External Control RS232C (In/Out), RJ45. POWER: type Internal, Power supply AC 100-240 V, 50/60 Hz, Power consumption max(W/h) 164, typical (W/h) 124, Sleep mode less than 1W, Off mode less than 1W. MECHANICAL SPECIFICATION: Dimension (mm) Set 1247.7x722.9x95.2, Package 1381x838x170. Weight (Kg) Set 17.9, Package 23.7. OPERATION: VESA Mount 400x400 mm, Bezel Width (mm) 17.5 mm (bottom 21.:5mm), Operating temperature 0-40 degree Celsius, Humidity 10-80%. Equivalent or upgraded version/ features are acceptable. Approved Make: Sony, Samsung, Panasonic.

Nos 2

Total 2


86

APPENDIX– D16 INVENTORY OF LANDSCAPING

Name of Work : Designing, Providing & Fixing Balcony / Terrace / Garden Landscaping including One year maintenance in

Mantralaya Mahanadi Bhawan, Naya Raipur Reference: W.O No. 1193 / LS/ Mantralaya-MD/EEC1 / CE (E) /NRDA/2014-15, Naya Raipur, dated: 24/ 12 /2014. Contract Agreement No. 33 /AV-AMC/ Mantralaya-MD/EEC1 / CE (E) / NRDA / 2014-15 dtd. 19/12/2014 [Vanya

Landscaping & Horticulture Solution (P) Ltd. Raipur] S. No. Description Unit Qty.

1 2 3 4 1 Designing of Balconay / Terrace / Garden Landscaping with Draft concept plan for

approval and after approval 3D concept plan complete as per direction & approval of Engineer-in-Charge.

Sqft. 1000

2 Design, Providing & Fixing BAMBOO WORK Murals / PANELLING IN WALL of APPROVED DESIGN AND SIZE with necessary mounting civil work complete as per direction & approval of Engineer-in-Charge.

Sqft. 100

3 Design, Providing & Fixing GFRP Murals / STATUE of APPROVED DESIGN AND SIZE with necessary mounting civil work complete as per direction & approval of Engineer-in-Charge.

Kg 40

4 Design, Providing & Fixing GRC / Siporex Murals of average size 24 Sqft complete as per direction & approval of Engineer-in-Charge.

Sqft. 40

5 Providing & Fixing 3' height Sand Stone statue/Fountain OF APPROVED DESIGN complete as per direction & approval of Engineer-in-Charge.

No. 2

6 Providing & Fixing Pedestal of Sand Stone Bollards (15” X 28”X15”) complete as per direction & approval of Engineer-in-Charge.

No. 2

7 Providing & Fixing BONSAI up to 3 feet height complete as per direction & approval of Engineer-in-Charge.

No. 2

8 Providing & Fixing Sand Stone / GFRP /Metal Garden Lights (1 feet) complete as per direction & approval of Engineer-in-Charge.

No. 2

9 Providing & Fixing Sand Stone Balls (7” height) complete as per direction & approval of Engineer-in-Charge.

No. 4

10 Providing & Fixing Water Proof Treatment with Chemical etc. complete as per direction & approval of Engineer-in-Charge..

Sqft. 1000

11 Providing & Fixing Tiles Arrangements for lawn complete as per direction & approval of Engineer-in-Charge.

Sqft. 1000

12 Providing & Fixing Poly Sheet for Lawn complete as per direction & approval of Engineer-in-Charge.

Sqft. 1000

13 Providing & Fixing Vertical Bio-wall with MS square frame with Plants, Soil mixture, Manure etc. complete as per direction & approval of Engineer-in-Charge.

Sqft. 400

14 Providing & Fixing Providing & Fixing of Talpatri for Bio Wall & Lawn complete as per direction & approval of Engineer-in-Charge.

Sqft. 400

15 Providing & Fixing Haridwar Stone complete as per direction & approval of Engineer-in-Charge.

Kg 1000

16 Providing & Fixing Fertile Soil Mix Manures for Lawn complete as per direction & approval of Engineer-in-Charge.

Cuft. 1000


87

17 Providing & Fixing of Mexican /Saint Augstin/Paspolum/Selection 1 Grass complete as per direction & approval of Engineer-in-Charge.

Sqft. 1000

18 Providing & Fixing Indoor Plants with Soil mixture, Manure etc. complete as per direction & approval of Engineer-in-Charge.

No. 200

19 Providing & Fixing Indoor Plants complete as per direction & approval of Engineer-in-Charge.

No. 400

20 Providing & Fixing Green Nylon Net for Protection of Plants complete as per direction & approval of Engineer-in-Charge.

Sqft. 500

21 Providing & Fixing Pots complete as per direction & approval of Engineer-in-Charge-

i Planter HG 3205 (WHITE/GRAY/BLACK/BROWN/SILVER) Self Irrigated Pots Size: 375 mm H X 300mm L X 375mm W

No. 2

ii Planter HG-3206 (WHITE/GRAY/BLACK/BROWN/SILVER) Self Irrigated Pots Size: 400 mm H X 375mm L X 450mm W

No. 2

iii Planter HG-3163 (WHITE/GRAY/BLACK/BROWN/SILVER) Self Irrigated Pots Size: 325 mm H X 575mm L X 300mm W

No. 4

iv Planter HG-3161 (WHITE/GRAY/BLACK/BROWN/SILVER) Self Irrigated Pots Size: 750 mm H X 300mm L X 400mm W

No. 1

v Planter Ceremic (WHITE/GRAY/BLACK/BROWN/BLUE ETC.) Size: 500 mm H X 450 mm R

No. 1

vi Planter Ceremic (WHITE/GRAY/BLACK/BROWN/BLUE ETC.) Size: 375 mm H X 350 mm R

No. 1

vii Planter Ceremic (WHITE/GRAY/BLACK/BROWN/BLUE ETC.) Size: 450 mm H X 450 mm R

No. 1

viii Planter Ceremic (WHITE/GRAY/BLACK/BROWN/BLUE ETC.) Size: 325 mm H X 325 mm R

No. 1

ix Planter Ceremic (WHITE/GRAY/BLACK/BROWN/BLUE ETC.) Size: 300 mm H X 300 mm R

No. 1

x Planter Ceremic (WHITE/GRAY/BLACK/BROWN/BLUE ETC.) Size: 200 mm H X 200 mm R

No. 1

xi Planter PLASTIC POT 20" WITH TRAY No. 10 xii Planter PLASTIC POT 20" WITH TRAY No. 10 xiii Planter PLASTIC POT 18" WITH TRAY No. 10 xiv Planter PLASTIC POT BLACK COLOR(SMALL) No. 20 xv CLAY BALLS No. 20


88

APPENDIX– D17 INVENTORY OF NEON-SIGN-BOARD

Name of work :- Designing, Making and fixing of LED Sign-boards with Dismantling & Re-erection of existing Neon-Sign-board in the Mantralaya-Mahanadi Bhawan & HoD-Indrawati Bhawan at Naya Raipur

. WO No: 21 /Sign-board/ Mantralaya-MD/EEC1 / CE (E) / NRDA / 2014-15, Naya Raipur, dated: 20 / 01 /2015 CA No. 36 /Sign-board/ Mantralaya-MD/EEC1 / CE (E)/ NRDA /14-15 Dtd. 19.01.15

Sl. No

Item No Discription Unit Qty

1 2 3

8

1 1

Dismentling & Rerection of existing Neon-Sign-boards with all necessary foundation, frame, material, labour, erection of board and necessary finishing as per specification and direction of engineer in charge with all lead and lift.

Job 1

2 2 Providing & fixing of defective electrical materials like Neon & transformers including wiring etc as per specification and direction of engineer in charge with all lead and lift.

Job 1

3 3

Designing, Making and fixing of LED Sign-boards which is made out of acrylic sheet of 3mm thick with 3 D letters in 6inch wide & 3 to 5 inch depth for Upper Letters and 4inch wide & 3 to 5 inch depth for Lower Letters with all necessary material, labour, erection of board and necessary finishing as per specification and direction of engineer in charge with all lead and lift.

Sqft 1910

4 4

Designing, Making and Fixing of Box for the LED Sign-boards will be fabricated in Mild steel Square tube of size1’”x1” of 16 gauge, the front of box will be covered with Aluminum Composite Panel sheet of thickness 3 mm and the back of the box will be covered with galvanized sheet of 20 gauge complete with all necessary material, labour, erection of bard and necessary priming and spray painting work.

Sqft 2136

5 5

Supply,installation and testing of LED WITH 60 amp Water-prrof Power supply every 30 sqft Supply of all required materials and wiring to circuits/ submains with following number and sizes of PVC insulated 1100 volt grade standard copper wire run inside pre-laid PVC conduit pipe of ISI Concealed wiring with 2x (1x2.5sqmm) + 1x (1x1.5sqmm) copper wire ( PANEL to Glow sign board) with timer with contactor ( L&T / Legrand ) make controlling the glowsign board with all accessories complete as required as per direction of Engineer in charge. The system will be apart of the panel board.

pcs 86

6 6

Designing, Making and fixing of Angle iron structural steel frame with embeded in concrete of M20 Grade for rection of sign board with all necessary material, labour, erection of board and necessary finishing as per specification and direction of engineer in charge with all lead and lift.

Job 3


89

APPENDIX– D18 INVENTORY OF WATER COOLER, WTP, RO & FILTRATION SYSTEM 5/10/12.5/15 HP PUMPS & PUMPING SYSTEM

Name of Work: Repairing & Annual Maintenance of WATER COOLER, WTP, RO & FILTRATION SYSTEM 5/10/12.5/15 HP Pumps & Pumping system of Mantralaya Mahanadi Bhawan and Rajdhani Sarovar at Naya Raipur

Sl. No. Item No.

Discription Unit Qty Remarks/Make

1 2 3 4 5 6 PART-1 : OVER-HAULING / REPAIRING OF BREAKDOWN UNITS / SYSTEMS [ONE-TIME ONLY]

1 A

OVER-HAULING / REPAIRING OF 5/10/12.5/15 HP CAPACITY SUBMERSIBLE

CENTRIFUGAL & HYDROPNUMATICE Pumps & pumping systems including NECESSARY PARTS & FITTINGS

(EXCLUDING CONSUMABLES) as per specification and direction of engineer-in-

charge.

Grundfos / HBD / Kirlosker make.

FOR ITEMS MENTIONED IN ANNEX-

1 & 2 FOR MANTRALAYA &

RAJDHANI SAROVAR.

2 1 3 to 5 HP CAPACITY SUBMERSIBLE Pumps & pumping systems

Set 6

3 2 6 to 10 HP CAPACITY SUBMERSIBLE Pumps & pumping systems

Set 5

4 3 3 to 5 HP CAPACITY CENTRIFUGAL Pumps & pumping systems

Set 8


Set 4


Set 2

7 6 3 to 5 HP CAPACITY HYDROPNUMATICE Pumps & pumping systems

Set 6

8 7 6 to 10 HP CAPACITY HYDROPNUMATICE Pumps & pumping systems Set 3


Set 3


Set 3

TOTAL-PART-1 40

PART-2:SUPPLYING / REPLACEMENT COST OF DEFECTIVE PARTS [DURING 12 MONTHS PERIOD AS & WHEN REQUIRED]

3 B

SUPPLYING, REPAIR & REPLACEMENT OF CONSUMABLE & DEFECTIVE PARTS OF WATER COOLER, WTP, RO & FILTRATION SYTEM including following items as per specification and direction of engineer-in-charge-

[Cost of Repairing / Replacement shall be Reimbursed as per

actual bill raised by the service provider after repairing / maintaining the agreed defective

items / materials (who is not covered in DLP /

Warranty)] FOR ITEMS

MENTIONED IN ANNEX-

4 1 NGMF-20 (COMPLETE SET) Set 1 5 2 NGMA-20 (COMPLETE SET) Set 1 6 3 Multiport Valve Top-Mounted 20 NB No. 2 7 4 Diaphragm Valve 40 NB R/L No. 2 8 5 Butterfly Valve 100 NB No. 2 9 6 25mm dia. Ball Valve for RO No. 4


90

10 7 Automatic Air-releif Valve No. 4 1 & 2 FOR MANTRALAYA &

RAJDHANI SAROVAR. 11 8 Pressure Gauge ( 0- 7 kg) No. 12 12 9 Dosing pump No. 2 13 10 Gun-Metal Nozzle Ejector for Softener No. 2

[Cost of Repairing / Replacement shall be Reimbursed as per

actual bill raised by the service provider after repairing / maintaining the agreed defective

items / materials (who is not covered in DLP /

Warranty)]FOR ITEMS MENTIONED IN ANNEX-


RAJDHANI SAROVAR.

14 11 Multigrade Filter (2Cum/hr) No. 2 15 12 Automatice Air Releif valve No. 4 16 13 Rotameter No. 8 17 14 800 LPH UV System No. 4

18 15

Supply & installation of SS 316 grade material 200 ltr. capacity Foodgrade Water Storage Tank with complete asseseries / assembly.

No. 2

19 16 Supply & installation of Electric Penal complete set with complete asseseries / assembly.

Set 2

20 17 Hardness Test Kit No. 2 21 18 Online SDI (Silt Density Index) Test Kit No. 1

22 TOTAL-PART-2 57

PART-3 : ANNUAL MAINTENANCE COST INCLUDING CONSUMABLE & PARTS

23 C

SUPPLYING, FIXING AND COMMISSIONING of following items in WATER COOLER, WTP, RO & FILTRATION SYSTEM as per specification and direction of engineer-in-charge-

FOR ITEMS MENTIONED IN ANNEX-


RAJDHANI SAROVAR.

24 1 Mambrane Filter 4040 For RO (Hydramen / CSM)

No. 12 For RO.

25 2 5 Micron RO Filter Cartrige size 20" x 2.5" [6TIMES X 4 = 24]

No. 24

26 3 Activated Carbon (900 IV) Kg 200 For WTP & Filter.

27 4 Antiscalant (Equivalent to INDION 8111 make)

Kg 240

28 5 Resin (Equivalent to INDION 225 Na make) Ltr. 500 For WTP.

29 6 Sodium Hypoclorite (NaoCl) / Bleaching Powder

Kg 1000 For WTP & Filter.

30 7 Filter Media [Hydrated Aluminium Sulphate - Alum - (Al2 So4)3] / (Ferric Chlorite/FeCl3)]

Kg 500

31 8 RO cleaning Chemical-A (Equivalent to SERCON 201 make)

Kg 100

For cleaning of RO membrane.

32 9 RO cleaning Chemical-B (Equivalent to SERCON 202 make)

Kg 100

33 10 RO cleaning Chemical-C (Equivalent to SERCON 203 make)

Kg 100

34 11

Charges for Regular servicing & maintenance of all WATER COOLER, WTP,

RO & FILTRATION SYSTEM AND 5/10/12.5/15 HP CAPACITY SUBMERSIBLE

CENTRIFUGAL & HYDROPNUMATICE Pumps & pumping systems including

installation, testing & commissioning of parts & materials complete. (EXCLUDING COST

OF PARTS & MATERIALS].

PER MONTH 12

For 12 Months FOR ITEMS MENTIONED IN ANNEX-1 & 2 FOR MANTRALAYA &

RAJDHANI SAROVAR.


91

35 PART-3 Total Per annum (for 12 months) 2788

Necessary Tools & Plants shall be brought at

site by the service provider for O&M.

36 ANNUAL TOTAL [PART-1, 2 & 3] 2885


92

MANTRALAYA WTP, RO, WATER COOLERS, WATER SUPPLY PUMPS & FILTRATION SYSTEM

Sr. No.

Description Qty. Unit Remarks

1 2 3 4 5

A WATER COOLERS:

6.31

Supplying, Installation, Testing, Commisioning (Voltas Tushar or approved equivalent make) storage type water cooler of capacity 120 Ltrs. per hour, 30 C at inlet & 13.5 C at outlet point complete with inline water filter pressure reducing valve, suction cooler hermetic compressor equipped with overload protector, propeller type condencer fan, theRmtostat, non-toxic refrigerant material, 230 volts with proper earthing connection suitably modified to supply with one downtake S.S. pipe of 25 mm dia & making fix drain connection through flexible hose. 4 Nos specially designed C.P. press to pour faucet etc. complete.

43 Nos

B WATER SUPPLY PUMPS & HYDRO SYSTEMS:

8.1

Supplying, Fixing, testing & commissioning HBD make horizontal multistage Single outlet centrifugal pump set (Split Casing) capable of delivering 2850 LPM at 85 M head for having cast iron casing, bronze impellers, EN-8 shaft with bronze shaft sleeves dir

1 Nos

8.2

Supplying, Fixing, testing & commissioning HBD make horizontal multistage Single outlet centrifugal pump set (Split Casing) capable of delivering 2850 LPM at 80 M head for having cast iron casing, bronze impellers, EN-8 shaft with bronze shaft sleeves dir

1 Nos

8.3

Supplying, Fixing testing & commissioning HBD make multistage horizontal centrifugal pump set capable of delivering 250 LPM at 85 M head due to all causes with TEFC squirrel cage induction motor of 2900 RPM, foundation bolts, etc. complete 12.5 HP (jockey

1 Nos

8.4

Supplying, Fixing testing & commissioning HBD make multistage horizontal centrifugal pump set capable of delivering 250 LPM at 80 M head due to all causes with TEFC squirrel cage induction motor of 2900 RPM, foundation bolts, etc. complete 12.5 HP (jockey

1 Nos

8.5

Supplying, Fixing testing & commissioning HBD make Terrace Fire Booster pump, horizontal centrifugal pump set capable of delivering 450 LPM at 35 M head due to all causes with TEFC squirrel cage induction motor of 2900 RPM, foundation bolts, etc. complet

6 Nos

8.6 AIR CUSHION TANK

Supplying, fixing, erecting, testing & commissioning Diaphragm operated vertical Air caution tank of capacity 600 Ltrs. fabricated out of 8mm thick MS plate vessel should be suitable to operate at a maximum pressure of 15 Kg/Sqm and should be complete wi

2 Nos

8.7 Auto-manual control panel for all above pumps. 1 Nos C Hydro-pneumatic Pumping-systems 8.8 Domestic water 1 Nos (HBD make skid mounted Hydro pneumatic system)

a)

Supplying, Fixing, Testing, erecting & Commissioning Vertical Stainless Steel inline pumps having 304 SS casing, 304 SS impellers, 304 SS shaft and driven by 15 HP 2900 RPM 415 Volts, 50 cycles, AC 3 phase TEFC motor. Each pump should be capable of delive

b)

Supplying Fixing Erecting, testing & Commissioning Vertical precharged diaphragm tank 100 Ltrs. suitable to operate at a maximum pressure of 15 Kg. and should be complete with necessary inlet & outlet connections for water, air and control. Vessel should

c) Supplying, Fixing, Testing, erecting & Commissioning Variable Speed drive Control panel with 1 No. Shnieider make Variable Speed drive controller and 1 No. Fixed speed drives for 3 X 15 HP pumps having 63 Amps incomming Isoalting switch fuse


93

Sr. No.


1 2 3 4 5

unit, Incommi

d)

The mega control should start the first pump on VFD. The pressure transmitter should provide signal to the VFD thorugh the PID controller in such a manner that as long as the consumption is within the capacity of the one Variable Speed pump a constant pre

e) all internal wiring to ensure that the entire equipments works as a composite system. 1 No.

8.9 Flushing water: 1 Nos (HBD make skid mounted Hydro pneumatic system)

a)

Supplying, Fixing, Testing, erecting & Commissioning Vertical Stainless Steel inline pumps having 304 SS casing, 304 SS impellers, 304 SS shaft and driven by 20 HP 2900 RPM 415 Volts, 50 cycles, AC 3 phase TEFC motor. Each pump should be capable of delive

b)

Supplying Fixing Erecting, testing & Commissioning Vertical precharged diaphragm tank 100 Ltrs. suitable to operate at a maximum pressure of 15 Kg. and should be complete with necessary inlet & outlet connections for water, air and control. Vessel should

c)

Supplying, Fixing, Testing, erecting & Commissioning Variable Speed drive Control panel with 1 No. shnieider make Variable Speed drive controller and 2 Nos. Fixed speed drives for 3 X 20 HP pumps having 63 Amps incomming Isoalting switch fuse unit, Incom

d)

The mega control should start the first pump on VFD. The pressure transmitter should provide signal to the VFD thorugh the PID controller in such a manner that as long as the consumption is within the capacity of the one Variable Speed pump a constant pre

e) all wiring to ensure that the entire equipments works as a composite system. 1 No. D SUMP PUMP FOR BASEMENT DRAIN:

8.1

Supplying, fixing, Testing & commissioning vertical foot mounted fully Submersible dewatering non clog sump pump of cast iron construction having bronze impeller, suitable for 1000 MM deep sump, capable of delivering 500 LPM at 15 M head 5 HP motor 2900

4 Nos

8.11

Supplying, Erecting, Testing Commissioning Fully automatic control panel for 2 x 5 HP storm water pumps with high and low level controls. Complete with all integral wiring using Copper PVC insulated/ Tapped and colour coded wires/flats of adequate size

1 Set

E WATER TREATMENT PLANT

8.12 Water treatment plant comprising of following of capacity 400CUM/DAY of Flow rate 50 CUM/HR & of 8 HRS. operation.

1 Set

1) Dual media filter of FRP shell 2) Activated carbon filter of FRP shell 3) Softener of FRP shell catering TDS of about 750 PPM 4) Dosing arrangement 5) Water quality is as follows TDS 1000 PPM, Hardness 750 PPM, Calcium 200 PPM 6) Necessary filter feed pumps (2 nos) & panels 50 CUM/HR at 20M Head F R O PLANT

8.13 R O plant comprising of all necessary equipment of capacity 6CUM/DAY of Flow rate 0.75 CUM/HR & of 8 HRS. operation.

4 Sets

G FILTRATION SYSTEM FOR WATER BODY 1 Nos 8.14 WATER BODY PUMPS

A Supplying, Fixing testing & commissioning horizontal fully submersible centrifugal


94

Sr. No.


1 2 3 4 5

pump set capable of delivering 1000 LPM at 25 M head due to all causes with motor of 2900 RPM, foundation bolts, etc. complete 10 HP (2 NOS.)

B Manual operated starter switch with on / off facility having low level protection capable for operations of two no. pumps (1 NO.)

C

Supplying, Fixing, Testing & commissioning Fiberglass Vertical high rate Pressure sand filter (cap. shall be 500 LPM) with 1200 mm. dia.x 1800 mm. high, Non corrosive base legs, etc. complete. with Top mounted, 6 position multiport valve - for back wash &

D Accessories :

Supplying, Fixing, Testing & commissioning Alum and Bleaching solution tanks fabricated out of PVC/FRP shall have a useful capacity of 100 Ltrs. provide removable hinged cover and tank shall be provided with hand.

Supplying, Fixing, Testing & commissioning Diaphragm operated pot type doser with PVC hose 7 injection nozzle etc.

Supplying, Fixing, & Testing All piping between balancing tank & pump, pump to filter (80 mm dia. UPVC Schedule 80 Pipes & GI fittings such as bend, Tee, socket & Approximate piping 80 meters with 16 Nos. fittings) Filter to water body and Brass CP Water

TOTAL


95

APPENDIX– D19 INVENTORY OF RAJDHANI SAROVAR

Name of work :Construction of Naya Raipur Capitol Complex- Lake (Rakhi) front development under conservation & development of water bodies under the head of 13th finance commission Reference: W.O. No: 517 /CCIID-Lake/ES/B/4-46/NRDA/2011-12, Dated: 18.04.2012 & Agreement No. 47/CCIID-

Lake/ES/B/4-46/NRDA/2011-12, Dated: 11.04.2012. *****

Ø- dk;Z dk uke Hkkjr ljdkj 13oak foRr vk;ksx ds }kjk tyk'k; laj{k.k ,oa lao/kZu en ds varxZr jkt/kkuh ifjlj fLFkr jk[kh tyk'k; ds laj{k.k ,oa fodkl dk dk;ZA

1 ,tsalh dk uke Mh- Ogh- izksatsDVl fyfeVsM ¼iVsy baVjizkbtsl] dksjck½

2 ih,elh@bath- bapktZ dk uke

dk;Zikyu vfHk;ark ¼flfoy1½] ,u-vkj-Mh-,-

3 dk;Z dh ykxr :- 32-14 djksM+

4 dk;Z izkjaHk frfFk 19-4-2011

5 dk;Z lekfIr frfFk ¼vuqca/k ds vuqlkj½

17-10-2013

6 dk;Z lekfIr dh frfFk tuojh -2014

10 dk;kZjaHk ,oa dk;Ziw.kZrk frfFk 1- tyk'k; foLrkj ¼pkSM+hdj.k ,oa xgjhdj.k½ dk;Z& izkjaHk 25 vizSy 2011] dk;Ziw.kZ uoEcj 2011

2- tyk'k; lao/kZu ,oa fuekZ.k dk;Z& izkjaHk 19 vizSy 2012] dk;Ziw.kZ tuojh 2014

11 tyk'k; dk fooj.k

• iqjkus tyk'k; dk {ks=Qy& tyk'k; 32-00 ,dM ¼13 gsDVs;j½ rVca/kksa lfgr dqy {ks=Qy 45-00 ,dM ¼18 gsDVs;j½

• iwoZ tyHkaMkj.k {kerk& 2 yk[k ?kuehVj ¼13 gsDVs;j½

• laof/kZr {ks=Qy& tyk'k; 47-00 ,dM ¼19 gsDVs;j½ rVca/kksa lfgr dqy {ks=Qy 75 ,dM ¼30 gsDVs;j½

• laof/kZr ty HkaMkj.k {kerk& 7 yk[k ?kuehVj

• tyk'k; ,oa rVca/kksa ds {ks=Qy esa 67% of) 13 izeq[k dk;Z • 9-40 yk[k ?kuehVj feÍh dh [kqnkbZ

• 1 fd0 eh0 yEck ?kkV fuekZ.k

• 2 fd0 eh0 yEck fifpax fuekZ.k

• 530 ehVj yEck ckmaMªh okWy

• 2 fd0 eh0 pSufyad QSfUlax

• 5 gsDV;j esa 10 iztkfr ds 4000 vkS"k/kh; o`{kkjksi.k

• 16 fd0 eh0 fMªi bjhxs'ku usVodZ

• tyk'k; esa vkDlhtu vkiwfrZ ,oa lqanjrk ds fy;s 12 QkmUVsu

• dkEIysDl ds okVj ckMh ds fy;s 'kksf/kr tyvkiwfrZ


96

• 2-50 fd0 eh0 tkWfxax Vªsd

• 60 nks ifg;k ,oa 42 pkj ifg;k okgu {kerk ds 2 ifCyd ikfdZx

• 2 ,esfuVh Cykd] 3 ifCyd VkW;ysV]

• 1-635 yk[k yhVj {kerk dk 1 ;w0 th0 VSd ,oa 3 iEi :e

• 4 fdpu ,oa 5 iscSfy;u rFkk 1 dSQs

• 7 izos'k }kj ,oa 5 lqj{kk dsfcu

• euksjatu ds fy;s LVst

• lqanjrk ,oa izdk'k ds fy;s 1250 ,ybZMh ykbZV

• Jh [kYykjh ekrk eafnj fuekZ.k dk;Z dk;Z dk uke &Hkkjr ljdkj 13oas foRr vk;ksx ds }kjk tyk'k; laj{k.k ,oa lao/kZu en ds varxZr dk;Z dk uke &Hkkjr ljdkj 13oas foRr vk;ksx ds }kjk tyk'k; laj{k.k ,oa lao/kZu en ds varxZr dk;Z dk uke &Hkkjr ljdkj 13oas foRr vk;ksx ds }kjk tyk'k; laj{k.k ,oa lao/kZu en ds varxZr dk;Z dk uke &Hkkjr ljdkj 13oas foRr vk;ksx ds }kjk tyk'k; laj{k.k ,oa lao/kZu en ds varxZr

jkt/kkuh ifjlj fLFkr jk[kh tyk'k; ds laj{k.k ,oa jkt/kkuh ifjlj fLFkr jk[kh tyk'k; ds laj{k.k ,oa jkt/kkuh ifjlj fLFkr jk[kh tyk'k; ds laj{k.k ,oa jkt/kkuh ifjlj fLFkr jk[kh tyk'k; ds laj{k.k ,oa fodkl dk dk;ZAfodkl dk dk;ZAfodkl dk dk;ZAfodkl dk dk;ZA 1111----0000 jk;iqj MsOgyiesaV vFkkWfjVh Hkkjr 'kklu ds fn'kk funsZ'kksa ds rgr~ i;kZoj.k] Hkwty ,oa o"kkZty

laj{k.k gsrq dr ladYi gSA u;k jk;iqj MsOgyiesaV vFkkWfjVh ds }kjk u;k jk;iqj ds jkt/kkuh ifjlj ds fofHkUu Hkouksa ,oa Hkw&lrg ds o"kkZ ty laxzg.k gsrq jkt/kkuh ifjlj fLFkr jk[kh tyk'k; ds laj{k.k ,oa fodkl dk dk;Z Hkkjr ljdkj 13oas foRr vk;ksx ds }kjk tyk'k; laj{k.k ,oa lao/kZu en ds varxZr fd;k tk jgk gSA

2222----0000 jkt/kkuh ifjlj esa 32-50 ,dM ¼13 gsDVs;j½ {ks= ds jk[kh tyk'k; dh orZeku ty la/kkj.k {kerk 2]00]000 ?ku ehVj gSA bl tyk'k; ds {ks=Qy 75 ,dM ¼30 gsDVs;j½ rFkk vkSlr xgjkbZ 1-50 ehVj ls c<+kdj 3-00 ehVj dh xbZ gSA {ks=Qy rFkk xgjkbZ esa o`f) djus bldh ty HkaMkj.k {kerk 5]50]000 ?kuehVj gks xbZ gSA bl tyk'k; ds foLrkj ,oa lao/kZu esa tyk'k; pkSM+hdj.k ,oa xgjhdj.k] o"kkZ ty laxzg.k ,oa la'kks/ku] tyk'k; esa ,;js'ku QkmUVsau] Iyfcax] lsusVjh ,oa flpkbZ O;oLFkk] Jh [kYykjh ekrk eafnj] m|ku fuekZ.k ,oa o`{kkjksi.k] ikFkos] rVca/kks ds fifpax ,oa jSfyax] ?kkV fuekZ.k] tulqfo/kk çlk/ku rFkk ikfdZx dk;Z gSA Appendix D19 to D19 of RFP to be appended here

Item No.

Particulars Units Qty.

1 2 3 4 STRUCTURAL WORKS

AA Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead up to 1000 meters and as per relevant clauses of section-200 in

cum

(i) Lime / Cement Concrete A Lime Concrete, cement concrete grade M-10 and below 153.72 B Cement Concrete Grade M-15 & M-20 cum 50.40

(iii) Stone Masonry cum

B Rubble stone masonry in cement mortar. 307.44

(vii) Scraping of Stone from dismantled stone masonry cum


97

Item No.


1 2 3 4 A In cement and lime mortar 307.44 A EARTHWORK AND METAL PACKING

A1 Excavation MANUALLY/ MECHANICALLY for foundations, trenches, retaining walls, plinth beams, underground tanks, effluent treatment tanks, etc. including backfilling of approved excavated materials in foundations & behind RCC walls after completion of waterproofing etc. and removing, spreading, watering and consolidating, carting away surplus earth on site within as directed beyond construction site/ building area including preparing the surface. (Note: All backfilling & spreading of earth shall be carried out in layers not exceeding 200mm and compacted to 90% ordinary proctor dry density

CUM

(a) In ordinary soil (brown/ black fine loose sand) but for lift upto 1.5m from existing level of excavation 13465.43 (b) In ordinary soil (brown/ black fine loose sand) but for lift above 1.5m to 3.0m CUM 3576.55 (c) In ordinary soil (brown/ black fine loose sand) but for lift above 3.0m to 4.5 m CUM 934.23 (f) Iin ordinary rock including loading in a truck and carrying of excavated material to embankment

site with in all lifts and leads upto 1000 meters as per relevant clauses of section 300. CUM 2773.60

A2(i) Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.roller or other approved mechanical equipment etc. complete as directed.

cum 2860.78

A2(ii) Filling in plinth and in other places with approved quality sieved sand 50 mm thick cushioining layer below pitching etc. complete as directed.

CUM 814.74

A3 (i) Providing and laying average 150 mm thick dry rubble packing below flooring, etc. and in foundations where directed with good quality Grey lime stone of approximately cubical shape of required thickness, hand setting including filling chips, spall sand in interstices ramming with mechanical rammer, watering, etc. as directed by Engineer-In -Charge etc. complete.

CUM 456.68

A3 (ii) Construction of granular sub-base cum 946.10 A4 Excavation for Roadway and Other Areas within the project site in all types of soil using plant and

machinery including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 meters as per relevant clauses of section 300.

CUM 210000.00

A5 Removal of Surplus Soil/ordianry rock/murrum with Disposal beyond 1000 m included in item of excavation up to 5000 meters

CUM 160450.00

CONCRETE-PLAIN & REINFORCED B1 Providing and laying Concrete of design mix using graded stone aggre-gate of 20mm and down,

including plastisizers or retarders if required, including all formwork, mechanical mixing, Vibrating, consolidation, finishing, curing etc. at all heights & levels all as per drawings, specifications as directed complete. CUM

(i) M-15 for all PCC work below the foundations, plinth beams, raft slab, of U/G tanks etc including side forms where ever required.

7353.83

(ii) (a) M-25 In footings/ foundations/ Raft slab CUM 496.12 (iii) (b) M-25 In Grade slab (including 400mm micron thick polythene sheet under the grade slab). cum 1280.42 (iv) (c) M-25 In columns and pedestal of all shapes and of all heights i.e square, circular or irregular at

floors as indicated. cum 106.20

(v) (d) M-25 in WALL at all levels as indicated. cum 529.01 (vi) (e) M-25 in FLOOR BEAMS at all levels as indicated. cum 309.15

(f) M-25 in LINTEL BEAMS at all levels. FOR SCREEN WALL cum 13.20 (g) M-25 in all type of floor slabs/ flat slabs/ loft slabs any thickness. cum 210.40

(vii) (h) M-25 STAIRCASE including landing slab. cum 15.72 (i) M-25 in facias, chajjas, drop pardhi, upstand pardis, fins, pergolas, coping etc. cum 46.69 (j) M-25 in machine foundation like DG, Chiller plant, transformer, pumps etc. cum 13.66


98

Item No.


1 2 3 4 C REINFORCEMENT

C1 Providing and fixing in position high yield strength deformed bar reinforcement with yield stress not less than Fe 500 of various diameters for RCC, footings, slabs, beams, columns, walls, retaining walls, trenches, drains etc. as per detailed design and drawing schedule including cutting, bending, hooking the bars, binding with 18 SWG GI wires including supporting as required and providing concrete cover blocks at all levels including all leadsand lifts etc. complete.

MT 200.593

D STRUCTURAL STEEL WORKS D1 Providing, fabricating and erecting in position the MS rolled steel structural members such as

plates, channels, beams, angles, tees, rods, chequered plates, insert plates and angles with hold fasts etc., of all sizes and shapes and as per detail design, drawings and specifications for various spans including preparing shop drawings for each structure and getting approved prior to fabrication, fillet welding, butt welding, bolts & nuts as specified in drawings, butt weld splicing, all as per specifications and special conditions of contract. The rate includes necessary machining/ grinding smoothening of members/ joints wherever required to give a neat appearance. The rate includes painting with zinc chromate primer with 3 coats of synthetic enamel paint. The rate also includes the erection machinery/ equipment, temporary supporting structures and members required for erection etc.complete.

MT 31.215

ARCHITECTURAL WORKS SECTION E : ANTI-TERMITE TREATMENT

E1 Anti-termite Pre-construction Treatment : (As per IS : 6313 Part - I, II, III & IV) (Note : Anti-termite treatment shall be carried out through specialised agency reputed in Pest Control treatment and approved by the Engineer. The contractor to give 10 years guarantee on a suitable bond).

Providing Preconstructional Anti-termite treatment all around the foundation and column pits, wall trenches, the top surface of the plinth filling, junction of wall and floor, along the external perimeter of the building complete using approved chemicals in the Stages mentioned in IS 6313 Part I, II, III & IV with specifed coverage per Sqm of area etc. complete. Plan area shall be measured for payment. Rate to be payable once for the number of operations required and application at various stages and levels.

sqm 1013.58

F SECTION F : MASONRY WORK F1 Providing and laying 1:6 c:m 150mm thk x 190mm high x 390mm long precast cement concrete

solid blocks having crushing strenght 75 kf/sqcm in masonry walls with approved quality of fly ash component as per IS code at all levels for Internal /external walls , including 2 hoop iron strips 25mm x 1.6mm at every third course properly bent and bonded at ends (incl. reinf) & including making grooves for concealing electrical conduits of dia upto 32mm including scaffolding, curing etc.

cum 284.91

F2 -do- same as item No. F1 above but for 200mm thk x 190mm x 390mm long solid concrete blocks sqm 910.25 F3 Providing and Filling/ making steps in concrete blocks with approved quality of fly ash component

as per IS code in cement mortar 1:6 including curing etc. complete. cum 9.41

GANOUD - RED SANDSTONE F4 Providing and laying uncoursed random rubble masonry of reddish pink sandstone in C:M 1:6 in

retaining walls, foundation and upto ground level including raking out joints when plastering to be done/ striking out joints, watering and scaffolding etc. complete as per detailed drawing and as directed / approved by Architect/Engineer.

cum 2521.27

F5 (iii)

Providing and laying hand cut, reddish pink Bilha stone or approved equivalent stone blocks, of average size100x200x600mm thk neatly dresse to give an even surface and fixed in position with 1:6 cement mortar of approved quality in approved pattern, laid edge to edge on a bed of joints finished with neat cement slurry, laying as per design, including curing, cleaning complete as directed & as per detail drawing.

cum 799.00

F 6 Providng and fixing uncoursed random rubble, reddish pink sandstone pitching, min thickness of 300mm, with cement mortar 1:6 and/or cement paste with required dressing of stone, scafolding

CuM 5351.79


99

Item No.


1 2 3 4 etc. complete as per detailed drawing and as directed/ approved by Architect/Engineer.

F9 MAHASAMUND SAND STONE (i) Providing and laying regular coursed rubble masonry of dressed yellow Mahasamund sandstone,

300mm(height) x (450 to 600)mm in C:M 1:6 above ground level upto plinth level & in superstructure, including sunk pointing, raking out joints, watering and scaffolding etc. complete as per detailed drawing and as directed/ approved by Architect/Engineer.

cum 58.64

SECTION G : PLASTERING & POINTING G1 Providing 23mm thick external sand faced cement plaster in cement mortar (1:3) in two coats

including using approved water proofing admixtures as per manufacturer's specifications including scaffolding and making drip moulds, grooves wherever required or as directed including supply and adding approved polypropylene fibres in dosage at the rate of 125 gms of Fibres per 50 Kg cement bag including using, in all plaster coats and in drip moulds, Fibremesh (Harbourite Fine Fibrillated 100% Virgin Polypropylene Fibres or equivalent), including scaffolding, curing etc., complete.

sqm 1182.02

G4 Providing 15mm thick cement plaster in cement mortar 1:4 without neeru, finished smooth for R.C.C/ brick/ block masonry complete in all respects including scaffolding, bonding agent, curing and as directed by Engineer-in-charge.

sqm 1115.85

G5 Providing 10mm thick cement plaster in cement mortar 1:4 without neeru, finished smooth for R.C.C/ brick/ block masonry with rough finish to receive Plaster of Paris (POP) or tiles complete in all respects including scaffolding, bonding agent, curing and as directed by Engineer-in-charge.

sqm 3700.19

G6 Providing Plaster of Paris (POP) rendering over cement plaster upto 8mm thickness for walls beams at all heights and ceiling and levels including scaffolding staging etc, complete.

sqm 2797.75

G8 Providing and laying 25 mm thick cement mortar 1:5 layer below pitching in Ghats complete as per detailed dwgs & as directed/ approved by Architect/Engineer. sqm 15599.78

SECTION H : PAINTING H1 Providing and applying 3 coats over a coat of primer, of oil bound distemper (Lead, Mercury,

Arsenic & Chromium free) of approved shade and of approved make over concrete/ plastered surfaces including preparing of the surfaces, caffolding etc complete in all respects.

sqm 2797.75

H6 Providing and applying 100 % Acrylic Exterior Weatherproof (Lead, Mercury, Arsenic & Chromium free) Paint Apex Ultima or approved equivalent make, colour and shade as approved, in three coats, first: Acrylic primer coat and two coats of Paint on external walls, over wire brushed cleansurface as per manufacturer's recommendations incl. scaffolding and preparation of surface to receive the paint, curing etc. complete

sqm 1884.12

SECTION J : PAVING, FLOORING AND DADO J2 Providing and laying 25-32mm thick hand cut & machine polished green kota stone flooring square

or diamond pattern ranging from 560mm x 560mm upto 750mm x 550mm finished size and of approved colour and shade including 1:6 cement mortar bedding, laid edge to edge, Joints finished with neat cement slurry, laying as per design, including 3 coats of machine polishing after laying, curing, cleaning complete as directed & as per detail drawing.

sqm 738.62

J5 Providing and laying hand cut, machine polished green Kota stone slab 25-32 mm thick for treads & risers of steps & with neat cement slurry, curing, edgestaircase in one piece approx. 2000mm in length, with engraving three lines for treads including nosing for treads, on bed of 1:4 cement mortar including cement float, filling joints polishing and cleaning complete.

sqm 152.47

J6 Providing & Fixing double window cills hand cut, machine mirror polished green Kotah stone (Horizontal & Vertical) 25-32 mm thk. & reqd. width on 1:4 cement plaster/ Cement paste over 50mm thk bedding mortar 1:4, with required pins incl. cement float, filling joints with neat cement slurry, stone pieces to be fixed with Araldite or approved equivalent addhesive, including curing, 3 coats of polishing (incl. Edge Polish), cleaning and rubbing complete & as per drawing.

sqm 150.15

J7 Providing & laying hand cut, machine polished green kotah stone on top of parapet, 25 to 32 mm thk. & reqd. width on 1:4 cement plaster& fixing with brass screws incl. cement float, filling joints with matching pigmented cement slurry required keys, curing, 3 coats of machine polishing, cleaning and rubbing complete as per drawing.

sqm 552.83


100

Item No.


1 2 3 4 J8 Providing & fixing flush skirting of height 100 to 175mm, machine polished & hand cut 25 to 32mm

thick green kotah stone, & size to match the joints in flooring, etc complete. sqm 64.44

J12 Providing & laying hand cut, machine polished green kotah stone 25-32mm thk. of required 100 mm width and in an inclined profile as per detail drawings for the ramp including fixing the same with cement paste, filling joints with neat white cement slurry, curing, polishing, edge polishing & cleaning and rubbing complete.

sqm 19.26

J16 Providing and fixing white coloured ceramic tiles of 200 x 200mm/300 x 300mm size confirming to IS 15622 , finish, make, 5mm to 6mm thickness, in flooring for toilet blocks, kitchen, pantries, floors, etc complete as directed including laid on average 20mm thick 1:4 cement mortar bedding joints filled with white cement paste or of approved colour grouting materials including curing, scaffolding etc.complete. (Overall tile variation allowance + 1.0 mm.)

sqm 105.71

J17 Providing and fixing Solid Coloured Ceramic Glazed tiles confirming to IS 15622 of 200 x 200mm/300 x 300mm in size and 5 to 6mm thick for dado of toilets in required position laid on a average 12mm thick bed of 1:3 cement mortar including neat cement backing, filling joints with white cement slurry, curing and cleaning complete.

sqm 665.70

J18 Providing and fixing 18 to 20mm thick granite stone partitions, mirror polished on both sides with edge polished of approved quality and colour for urinals including cutting holes of required sizes for pipes in appropriate places, fixing in cement mortar 1:3, curing, cleaning etc.complete.

sqm 9.36

J20 Providing 18 to 20mm thick kitchen/ other platform counters of machine cut, mirror polished granite stone of approved shape, quality and colour including Cuddappah base, vertical frames, cutting holes of required sizes in appropriate locations to receive sink pipes etc. edge rounding/ polishing, fixing in the cement mortar 1:3, curing , cleaning etc. complete.

sqm 83.56

J24 Providing & laying paving in a combination of handcut, sand blasted Reddish pink Sandstone (40-50mm thk) and machine cut, flame finished grey Granite (18-20mm thk) in a ratio of 60%:40%, stone size 450 x 450 mm, including chamfering of edges laid edge to edge as per approved fan, circular or other pattern and colour, with cement mortar 1: 6 , laying blocks to the required slope, leveling, filling, cleaning the surface etc with all labour and transportation to site and as per directions of the Engineer.

sqm 1456.39

J29 (i) Providing & laying machine cut, Achouli-Tumgaon/Basin-Rajim Black Flagstone (average thickness 60mm thk) stone size up to 600 x 450 mm and 750 x 450 mm etc. for treads /risers of ghat steps & cafe flooring, including chamfering of edges laid edge to edge as per approved fan, circular or other pattern and colour, with cement mortar 1: 6, laying blocks to the required slope, leveling, filling, cleaning the surface etc with all labour and transportation to site and as per directions of the Engineer. Actual area of stone laid will be measured i.e. for Ghat steps overlap of treads will be paid for. (PCC to make up levels will be measured separately under relevant item and paid for.)

sqm 14349.32

J29 (ii)

Providing & laying machine cut, Achouli-Tumgaon/Basin-Rajim Blackstone (60mm to 75mm thk) for stone masonry, including chamfering of edges laid edge to edge as per approved fan, circular or other pattern and colour, with cement mortar 1: 6, laying blocks to the required slope, leveling, filling, cleaning the surface etc with all labour and transportation to site and as per directions of the Engineer. Actual area of stone laid will be measured will be paid for.

cum 315.36

J31 Providing and fixing TACTILE tiles of approved size, finish, make, 10mm thickness, in flooring for toilet blocks, kitchen, pantries, floors, etc complete as directed for differently abled toilet including plastering 1:4 cement mortar bedding joints filled with white cement paste or of approved colour grouting materials including curing, scaffolding etc.complete. (Overall tile variation allowance + 1.0 mm.)

sqm 13.50

J32 Providing and laying hand cut, reddish pink Bilha stone or approved equivalent stone slabs, 40-50mm thk & of 300 x 300mm finished size of approved quality for flooring in square or diamond pattern, laid edge to edge on a bed of 1:6 cement mortar joints finished with neat cement slurry, laying as per design, including curing, cleaning complete as directed & as per detail drawing.

sqm 475.04

SECTION K : DOORS, WINDOWS, VENTILATORS AND ROLLING SHUTTERS K1 Providing & fixing mild steel sheet frames for door/ window 152 mm x 50 mm of 18 gauge nominal

as per drawing with/ without ventilators incl. anchor fasteners HILTI or approved equivalent to be rmt 205.50


101

Item No.


1 2 3 4 fixed to the frame, & providing concrete bedblock for fixing the anchor fastener including filling cement mortar 1:6 in hollow core and 1 coat of zinc chromate primer & finishing with 3 Coats of Synthetic Enamel paint etc. complete.

K2 Same as Item No. K1 but for Door Frame of Sized 152 mm x 50 mm of 16 Gauge nominal for Fire Doors

rmt 34.80

K3 HARDWARE:- Providing and fixing the hardware complete in all respects with necessary pins, plates, screws etc(All fittings & fixtures shall be of Heavy duty quality) and as specified in the detail drawing. nos.

a SS BALL BEARING Hinges 4" x 3" x3mm Signature or approved equivalent 145.00 b SS BALL BEARING Hinges 4" x 4" x3mm Signature or approved equivalent nos 24.00 c Concealed Tower Bolts 24" Signature or approved equivalent nos 4.00 d Concealed Tower Bolts 8" Signature or approved equivalent nos 4.00 h D-pull handle 200mm pair SIGNATURE MAKE (2nos individually mounted on escutcheon) set 74.00 i Latch upto 150 mm SIGNATURE MAKE nos 16.00 k Lever Handles pair with mortice Lock BOTH SIDE KEY DORSET or approved equivalent nos 6.00 m Mortice Dead Lock BOTH SIDE KEY EPC 70MM - DORSET or approved equivalent nos 10.00 n Mortice Dead Lock BOTH SIDE KEY EPC 60MM - DORSETor approved equivalent nos 11.00 o Dorma Sliding System SL 8 Track 32*32*5mm, Track Length with Clamps, 2 Rollers, end stops &

fixing Acc nos 2.00

p Mortice Sliding Door 400 Hook Bolt for euro Profile cyl with 55mm backset, 22mm Sq Forend, Incl Strike Plate in satin stainless steel , Including 60mm length with oneside thumbturn and one coin slot for emergency operation & esc

nos 2.00

s Door Closer TS 68 DORMA or approved equivalent nos 47.00 t Raven RP 48, EPDM Closed Cells Sponge round the door for Dust Sound & Smoke Prtection -

RAVEN rmt 0.00

u Door Buffer with Vinyl (White) PVC Bush shutter or Wall mounted nos 0.00 v Easy clean floor socket SIGNATURE MAKE or approved equivalent nos 47.00

K4(i) Providing plain 6mm thick clear float glass for glazed doors and windows including side beadings, rubber gaskets etc. complete.

sqm 26.42

K5 Providing 5mm thick bajri glass for louvered windows. sqm 36.62 K6 Providing and fixing solid core flush door shutter in single/ Double leaf 35/ 50 mm thk. Marine type

of exterior grade as per detailed drawings, approved marine plywood facing on both sides without glazing and Venetians, all necessary 12 x 18 mm teak wood beading/ moulding and 6 x 35/ 50mm T.W. lipping, laminate , veneer and Paint finish as per detailed drawing and schedule and to the satisfaction of Architect/Engineer. Hardware to be paid for separately.

a (iv) D4 TOILET CUBICLE SIZE: 800 X 2100mm SHUTTER (800 X 2100mm approx.) 35mm thk solid core marine flush single shutters finished with approved 1mm thk laminate on 3mm thk plywood on both sides with 2mm grooves in laminate as per drawing.

sqm 26.88

a (vi) D8a - 900 X 2400 SECURITY CABIN, STORE ROOM SIZE: 900 X 2400mm SHUTTER (900 X 2400mm approx.) 35mm thk solid core marine flush single shutters finished with approved 1mm thk laminate on 3mm thk plywood on both sides with 2mm grooves in laminate as per drawing.

sqm 12.96

a (viii)

D9a TOILET, SIZE: 900 X 2400mm, SHUTTER (900 X 2400mm approx.) 50mm thk solid core marine flush single shutters finished with approved 1mm thk laminate on

sqm 12.96


102

Item No.


1 2 3 4 3mm thk plywood on both sides with 2mm grooves in laminate as per drawing.

a (ix) D9bJANITOR , SIZE: 900 X 2400mmSHUTTER (900 X 2400mm approx.)35mm thk solid core marine flush single shutters finished with approved 1mm thk laminate on 3mm thk plywood on both sides with 2mm grooves in laminate as per drawing.

sqm 4.32

a (xi) D15 TOILET FOR THE PHYSICALLY CHALLENGED, SIZE: 1000 X 2100mm SHUTTER (1000 X 2100mm approx.) 35mm thk solid core marine flush single shutters finished with approved 1mm thk laminate on 3mm thk plywood on both sides with 2mm grooves in laminate as per drawing.

sqm 6.30

a (xv) D22 TOILET FOR THE PHYSICALLY CHALLENGED (OUTER) SIZE: 1000 X 2400mm SHUTTER (1000 X 2400mm approx.) 35mm thk solid core marine flush single sliding shutter finished with approved 1mm thk laminate from both sides with 2mm grooves in laminate as per drawing

sqm 4.80

a (xviii)

D30 GARDENING STORE, MISC. UTILITIES ROOM SIZE: 1800 X 2400mm SHUTTER (1800 X 2400mm approx.) 50mm thk solid core marine flush double equal shutters finished with approved 1mm thk laminate on 3mm thk plywood on both sides with 2mm grooves in laminate as per drawing.

sqm 17.28

b (i) FD4 KITCHEN & PANTRY SIZE : 900 X2400 SHUTTER (900 X2400mm approx.) 60mm thick solid core marine flush single shutters with 1mm thk laminate from outside and synthetic enamel paint on the inside on 3mm thk plywood with 2mm grooves in laminate & plywood as per drawing.

sqm 12.96

K8 Providing, fabricating & fixing Glazed Anodised Aluminium windows (fixed, louvered, openable, sliding etc) using approved sections for subframes,frames, shutter frames,mullions, couplers, tubular sections, beading, etc, 6mm thick float glass, all fixtures, hold fasts, fixing by drilling in concrete (if required), handles, stainless steel IMEX hinges for openable windows, approved concealed locking arrangement, for sliding windows,approved ball bearing rollers and guides along with anti-rattling pieces/ guides at top & bottom Neoprene gaskets for fixing glass & colour anodising all aluminium sections to a thickness of anodic film not less than 20 microns, fixing frames to RCC with anchor fasteners, filling Silicon sealant between Stone & Aluminium Frame etc. complete as given below: including aluminium single/double doors withfloor hinges. Aluminium sliding windows (for all tracks) weight of Aluminum Sections will only be considered. Aluminium sliding/ openable windows (for all tracks/ sections) weight of Aluminium Sections will only be considered. Cost of accessories to be included in the rate. Glass to be paid for separately.

kg 792.24

SECTION L : WATER PROOFING & EXPANSION JOINTS L1 Providing and applying 70mm to 75mm thick (Total) proprietary brand cement based waterproofing

(box type) for bottom RCC raft slab and sides of RCC walls of watertanks, septic tanks, effluent treatment tanks, etc. including providing leakproof treatment by injection grouting to concrete members at 1.0m centres in both directions and also at all construction joints, and providing and fixing 20mm to 25mm thick rough Shahabad stone or other approved stone tiles set in 20mm thick 1:3 waterproof cement mortar and finishing the by laying/ plastering, with 20-30 mm thick C:M in 1:3 with waterproof compound

sqm 789.31

L2 Providing and applying as per manufacturers specifications a minimum of three coats of proprietary brand waterproofing coating using acrylic latex copolymers free from SBR's including thorough surface preparation, applying compatible primer coats etc. including providing leakproof treatment by injection grouting to concrete members by using waterproof polymer based on acrylates free

sqm 830.19


103

Item No.


1 2 3 4 from SBR's or modified SBR's at 1.0 metre centres in both direction, to top of RCC slabs in terrace, waterbodies, for toilets at the floor levels, sloping and curved surfaces. The coating shall be brush applied and rate shall include all surface preparation as per manufacturer's specification to the RCC surface. Coating shall also continue over walls of toilet upto 300 mm and on the side and top of the terrace parapet walls & vertical walls of the waterbody. Rate to include providing and laying upto 25mm thick protective cement mortar screed over the membrane, curing etc. complete. The thickness and no. of coats including primer if any shall be as per the manufacturers recommendations. (Only plan area shall be considered for making payment)

L3 Providing and Laying bricks bats laid in required slope to drain the water for any span on a base layer of base (latex) waterproofing , bottom layer in C:M 1:5 admixed with approved waterproofing compound filling upto half depth of the brick bats, curing this layer for 3 days applying cement slurry over this layer jointing of brick bats with C:M 1:3 admixed with approved waterproof compound and finally top finishing with average 20 mm thick layers of cement mortar added with jute fibre at 1 kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound & preparing the surface to receive china mosaic flooring on it, and making the junctions at the parapet rounded and tapered towards top upto required height, with drip mould at the junction of the plaster and parapet including curing by ponding test etc. complete. Average thickness of brick bat coba to be 150mm (Only plan area shall be considered for making payment)

sqm 751.22

L5 Providing and applying 20 to 35 mm thick smooth finished water proof plaster/ bedding, in cement mortar 1:3 with waterproof admixture of approved quality and quantity for waterproofing water tank, including back trowelling as specified, making the surface smooth and hard or preparing the surface to receive the plaster or tiles as directed etc complete.

sqm 565.84

L6 Providing and laying in required position china mosaic flooring over conventional waterproofing treatment or at ground level over PCC or IPS base of approved colour & pattern on 40mm thick bedding of 1:4 pattern on 40mm thick bedding of 1:4 giving proper slopes, compaction, curing, including on curved & vertical surfaces etc.complete.

(i) China mosaic with broken white pieces (size 25 to 35mm) sqm 663.05 (ii) China mosaic with solid (single colour) coloured pieces (size 25 to 35mm) sqm 88.17

SECTION N: MISCELLANEOUS ITEMS N1 SKYLIGHT

(i)

Providing & Fixing POLYCARBONATE THERMOFORM DOME, 4 MM thk clear, fixed on Aluminum Tube runner fixed with screw with EDPM washer & M10 Anchor fasteners to concrete scaffolding at all heights including making the joints waterproof etc. complete. As per detail drawing. upto 1600mm

nos. 2.00

N3 S.S. RAILING - Handicapped Toilet Providing, fabricating and fixing in position S. S. 316 satin finish Railing of 48.3mm (O.D.) or as required upto 2000mm height for handicap toilet as per drawing including grouting accurate socket for receiving vertical pipe erecting railing and base plate, S.S. bolts, necessary special hardware for the handicap toilet, grouting etc. complete & as per arch. drawing. Cost of accessories to be included in the rate.

kg 662.93

N4 S.S. RAILING Providing & fabricating including bending and welding with approved special electrodes and fixing in position hand rails consisting of S.S.316 satin finish hand rails of various diameters as per drawings and minimum 1.2mm thick, including providing and fixing stainless steel brackets , or base plates fixing to the concrete with 12mm dia Wedge bolts 4 Nos/ bracket, or welding to insert plates etc. complete as directed. Cost of accessories to be included in the rate.

(i) Railing as per detailed drawing consisting of 54 mm outer dia Hollow pipe of S.S. 316 vertical with fixed base at 900 c/c , tilted plu ring, 2 Nos 25 mm outer dia. Hollow S.S. pipe and 54 mm outer dia. Hollow S.S. pipe top

kg 2119.09

N5 Mirror Providing & fixing 6mm thk. Circular mirrors with S.S. satin finish studs as per detail nos 3.00


104

Item No.


1 2 3 4

(i)

architectural drawing complete including required edge polishing, scaffolding at all heights etc. (only actual surface area shall be considered for measurements) 600 mm dia. Mirrors

N6

(ii)

Core Cutting Providing holes in concrete slabs, beams, pardis, Ashler masonry walls etc. electrical concrete core cutting machine (Hilti or approved equivalent) with suitable drilling bit at all levels as directed by the Engineer. 76mm Dia. - 150mm Dia.

nos 34.00

N7 GI Pergola: Providing , Fabricating and fixing " B " Class G.I. Pipe Pergolas in single length consisting of all around welding of 110mm dia. GI pipe to 10mm thk, 150mm dia GI insert plate with necessary lugs for embedding in concrete members. The insert plate to be coated with solvent cement brush applied and sprinkled with sand to receive external plaster with expanded GI metal between joints of dissimilar surfaces (provided seperately under Item no. G1) as shown in the detailed drawing including providing and applying Etching Primer and 3 coats of Epoxy Paint (Silver colour), required welding, bolting, scaffolding etc. complete.

(i) Pergola of 110 mm dia. G.I. Pipes rmt 37.60 N9 Providing and Fixing Decorative M.S. Railing / Grill / Frame as per detailed drawing with required

inserts, screws, nut ,bolts , welding, required scafolding etc. complete as per detaiiled drawings and including 2 coats of enamel paint of approved make and shade over 1 coat of zinc chromate primer as directed.

MT 25.173

N10 (i)

Supplying manually operated M.S. Cantilever Sliding Gates as per detailed drawing with all necessary fixtures and accessories & required inserts, screws, nut, bolts, welding Machinery, Sliding arrangement, rollers , required scafolding etc. complete as per detailed drawing

nos 7.00

(ii) Fixing & installation of M.S. Cantilever Sliding Gates (Extra Heavy) nos 7.00 N15 Providing & fixing GI chain link fencing of 50 mm sq. size & 10 gauge thick over the MS angle

supports (Paid separately), properly stretched & bound to angles by GI pins through holes etc. complete as per IS 1566-1982.

sqm 4953.63

N16 Providing and laying 500 micron black LDPE film (Shivathene PE Film)as per IS 2508(1984 rev.), with minimum 7% looseness factor, width of film 7m & length of Than 30m, joint with Double Heat Welding joints (width of sealing joints 50-75 mm) & laid over sand cushion (sand filling paid separately) as lining to base and sloped sides. Shivalik Agro Poly Product Ltd or approved equivalent

Sqm 5527.33

N20 Providing and constructing masonry Manholes of size 600 x 600 x 750 mm deep for Electrical cables comprising of 150 mm thick PCC base in M15, 230 mm thick brick masonry walls with single coat cement plaster in CM1:4 on all sides (internal and external), 150 mm thick PCC coping in M20 with rebate for precast cover, 75 mm thick precast RCC cover in M20 grade concrete with necessary reinforcement steel and including all necessary excavation in soil, backfilling sides on completion of work etc all complete.

nos 2.00

N21 Providing and constructing RCC Manholes of size 750 x 750 x 1000 mm deep for Electrical cables comprising of 150 mm thick PCC base in M15 over 150 mm thick granular sub base, 200 mm thick RCC walls as per structural design with 20 -35 mm thick waterproof cement plaster in CM1:4 from inside all around including bottom, 100 mm thick precast RCC cover in M20 grade concrete with necessary reinforcement steel fixed in MS angle nosing embedded in RCC wall with hold fasts and including all necessary excavation in soil, backfilling sides on completion of work etc all complete.

nos 130.00

SECTION O: STREET FURNITURE 1 Providing and fixing local granite stone slab bench as per detailed drawing. Nos. 300.00 3 Providing SULO MGB Collection Bins - german or equivalent of 240 Litres capacity .The same

should be cerified according to EN 840 and RAL GZ 951/1. nos 0.00

LANDSCAPING WORKS


105

Item No.


1 2 3 4 A CIVIL WORK 1 Excavation upto 2.00 M (including for foundation) in all types of soils, such as Earth, Marine Clay,

Marshy Land, Running Sand, Garbage, Slush, Murum, Rock Boulders etc. as directed by Engineer. The rate includes pumping out water, backfilling, removing the rank vegetation and refilling the excavated materials within a lead of 150 M as directed including leveling, ramming etc. complete, and measured from the edge of cutting including all lifts and stacking in layers and removing the surplus excavated materials to any distance as directed (Records to be maintained properly). The rate also includes supporting public utilities such as cables, drains services pipes water mains, but shall not include the cost of shoring. Where unshored trenches are allowed slope as specified shall be given.

cum 11371.69

2 Providing and laying 100 mm thick , M 15 cement concrete with minimum cement content of 215 Kg. per Cu.M. including mixing placing consolidating curing etc. complete but excluding shuttering (not to be used for R.C.C. works)

cum 1553.38

3 Providing and laying dry rubble stone packing 230 mm. thick hand set in regular lines, interstices being filled in with small pieces of stones, thoroughly rammed, consolidated and watered complete as directed and specified.

cum 3069.20

4 Providing and laying hand cut, sand blasted, reddish pink sandstone slabs, 40-50mm thk & of 300 x 300mm/ 600 x 600 mm finished size of approved quality for flooring in square or diamond pattern, laid edge to edge on a bed of 1:6 cement mortar joints finished with neat cement slurry,laying as per design, including curing, cleaning complete as directed & as per detail drawing.

sqm 12277.46

9 Pathway in wbm-Providing and Laying WBM for informal pathway with bottom layer of hand broken metal not smaller than 50mm size and 120mm, 20 to 22 cm layer to be compacted to 15 cms by 10 T roller and above mix of metal no. 2 & metal no. 3 in 1:1 proportion mixed with stone dust or fine sieved sand of size 2mm, 15 cms layer to be compacted to 10cms by 10 T road roller ; hard murum or muram mixed with 5% O.P. cement, laid to 10 cms layer to be compacted to 8cms on it by 10 T road roller and the top layer is fine sieved red earth & sand layer in the respective proportion of 2:1 size of granules 2mm<>4mm to be sieved before mixing (red earth + river sand or grey clay earth + bajari sand) to be throughly compacted by 5 Ton hand roller to give final thk. of 2cms.

sqm 3486.43

B FOUNTAIN WORK I Providing and Fixing of Aerator Fountain ( Air Flo) For Lake I ( Left Side ) .

nos

1 Air Flo LM 2000( No.50185 ) floating fountain Assembly unit Consisting 4.00 2 4 K/w Nozzle Superior XL nos 4.00 3 Under Water Lights Lunagua 10 - 3 Nos

unit

4 50 watts 12 Volts Halogen - 3 Nos 5 Light Brackets - 3 Nos 6 Safety Transformer 150VA-230V 12V-50Hz - 1 No 4.00 7 Electrical Control Panel nos 2.00 8 Cables make Finolex/Polycab/PVC

1.5 sq mm 3 core copper flexible cable rmt 740.00

9 2.5 sq mm 3 core copper flexible cable rmt 740.00 II Providing and Fixing of Aerator Fountain ( Air Flo) For Lake II ( Right Side ) . I Providing and Fixing of Aerator Fountain ( Air Flo) For Lake I ( Left Side ) .

nos

1 Air Flo LM 2000( No.50185 ) floating fountain Assembly unit Consisting 8.00 2 4 K/w Nozzle Superior XL nos 8.00 3 Under Water Lights Lunagua 10 - 3 Nos

unit

4 50 watts 12 Volts Halogen - 3 Nos


106

Item No.


1 2 3 4 5 Light Brackets - 3 Nos 6 Safety Transformer 150VA-230V 12V-50Hz - 1 No 8.00 7 Electrical Control Panel nos 4.00 8 Cables make Finolex/Polycab/PVC

1.5 sq mm 3 core copper flexible cable rmt 2055.00

9 2.5 sq mm 3 core copper flexible cable rmt 2055.00 C HORTICULTURAL WORK I TRANSPLANTING OF TREES Transplanting the specified trees as shown on the plan/ drawings or as directed by the architect/

landscape consultant/ Engineer-in-charge; as per the detailed specifications & methodology described here in before, inclusive of all excavation removing the tree from from its original position & transplanting the same at the new position, inclusive of using all necessary equipments, gadgets, watering of trees, providing the nutrients and post transplanting care until the end of the Defect Liablity Period.

nos

iv) 381 to 450 mm 0.00 II TREES 1 Alstonia scholaris nos 160.00 2 Butea monosperma nos 600.00 3 Cassia fistula nos 800.00 4 Chukrasia tubularis nos 600.00 5 Dalbergia latifolia nos 600.00 6 Ficus benghalensis nos 5.00 7 Ficus infectoria nos 50.00 8 Ficus religiosa nos 40.00 9 Mimusops elengii nos 775.00

10 Saraca indica nos 95.00 III SHRUBS 1 Bougainvillea glabra nos 40.00 2 Bougainvillea mary palmer nos 35.00 3 Fine dressing the ground for Grass plantation. sqm 16766.00 4 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump

manure or/ and good earth to be paid separately). cum 1927.46

5 Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In rows 5 cm apart in either direction.

sqm 16766.00

D IRRIGATION WORKS 2 Providing, supplying, laying & Jointing at site of work Rigid PVC pipes & specials as per latest BS /

IS : 4985 / 2000 certified specifications and for a working pressure of 10/ 06 kgf /cm2 including cost of PVC solvent cement for jointing, making the joint water tight all labour, material, transportation, taxes, etc. complete.

2.1 75 mm Dia x 06 Kgf / Cm2 rmt 2132.00 2.2 63 mm Dia x 06 Kgf / Cm2 rmt 1011.00 2.3 50 mm Dia x 06 Kgf / Cm2 rmt 1738.00 2.4 40 mm Dia x 06 Kgf / Cm2 rmt 3864.00


107

Item No.


1 2 3 4 3 Providing and laying DRIP lateral tubing of 2.5kg/cm2 working pressure for single/multi Row

planting testing and commissioning as directed with necessary fittings i.e elbow, tee, Gromate, take-off, line end, plug, adapter etc. and specials as per IS: 12786 & ISO 9001/2 material, labour, transportation,taxes etc. complete.

rmt

3.1 16 mm Dia 12375.00 4 Providing and fixing pressure compensating, self-flushing Emitter/Dripper of 4/8 ltr/hr capacity with

necessary fittings, including cost of material, labour, transportation, taxes etc. complete. nos 6564.00

5 Providing, installing, commissioning & testing of Butterfly valve of ISO 9002 standard,with necessary fittings viz. m.s. Flange, nutbolt, ABS packing etc. including labour,material, transportation, taxes etc. complete. Make :- Normex / hawa / Kartar nos

5.1 75 mm dia. (2.5" Size) 22.00 6 Providing, installing, commissioning & testing of 3/4" Quick Coupling valve of brass material, with

necessary fittings viz. M.S. Saddle,Rubber Teflon Tape, etc. including labour,material, transportation, taxes etc. complete.

nos 49.00

7 Providing, supplying & installing of Circular and Rectangular Valve Box of rugged, UV-resistant Thermoplastic construction with locking arrangement complete. Including material, labour transportation, etc. complete. nos

7.1 Circular Valve Box 7" Size 49.00 7.2 Rectangular Valve Box 12" Size nos 22.00

8 Providing, Supplying, Installating and testing of Air Release cum Vaccum Breaker double action valve of 1" with necessary fittings, labour, taxes, Transport complete.

nos 2.00

9 Providing, Supplying , Installing and testing of Metal Sand + Screen Filter of 40 m3 / Hr. with By Plass, Flushing Arrangment, Pressure Gauge Inlet outlet Fittings etc. with Labour, Taxes , Transport Complete

nos 2.00

10

Providing, Supplying , Installing and testing of Vertical Openwell submersible Pump of 5 HP of having discharge 5 Lps & total Head of 50 Meters with By Plass, NRV, Common Header,Flushing Unit, Inlet outlet Fittings, control Panel Outdoor type etc. with Labour, Taxes ,Transport Complete (1 Working + 1 Stand by)

nos 2.00

11 Providing, supplying & installing of Plastic Flush valve to flush submains withstands ISO standards with necessary fittings, labour, transportation, taxes etc. Complete. nos

50 -40 mm size 24.00 12 Providing, supplying, installing, & testing of electrically operated solenoid valve with manual

override and withstands ISO 9001/2000 quality standards. 24v AC 50/60 cycle solenoid power requirement - 0.41Amp (9.9VA) in rush current and 0.23 Amp (5.5VA) holding current Pressure - 1.4 to 10.0 bars Flow - 7 to 9.5 Lit/Sec With necessary fittings, labour, transportation, taxes etc. complete.

nos

12.1 2.0" size 22.00 13 Providing, supplying, laying, Jointing of Single Core Control Cable with necessary fixtures &

fittings withstands ISO9001/2000 quality standards including labour,material, transportation, taxes etc. complete. rmt

13.1 2.5 sq. mm. Common Ground Wire 1877.00 13.2 1.5 sq. mm. Active Wire rmt 6609.00

14 Providing, supplying, installing, & testing of 7 station Irrigation Controller with Advanced easy to use features quality including, necessary fixtures, battery, fittings, labour, material, transportation, taxes etc. complete

nos 2.00

15 Earth-work in excavation for trenches, pits, pipe-lines, foundations, walls etc. in soft soil for depth upto 450 mm and about 300 mm wide including removing excavated material upto a distance of 50 m beyond the ages often ches/pits etc preparing the bed form foundations & necessary backfilling the excavated pit /trench as directed by engineer

cum 1988.07


108

Item No.


1 2 3 4 17 Earth-work in excavation for trenches, pits, pipe-lines, foundations, walls etc. in soft rock ,boulders

& Weathered Rock between 3 to 30 mm. in size for depth upto 0.50 m including removing excavated material upto a distance of 50m beyond the ages often ches/pits etc breaking the boulders into 225 mm size rubble including stocking the same (rubble as well as soft rock) and /or spreading as directed, bailing of water if any, preparing the bed form foundations & necessary backfilling the excavated pit /trench as directed by engineer in charge. All labour & material complete.

cum 62.00

18 Providing, supplying, laying & Jointing at site of RCC Hume pipes of NP2 Class of following sizes with necessary fittings etc. complete rmt

18.1 Hume Pipe 300 mm Size 56.00 1. DRAINAGE :

1.1 Supplying, laying, jointing & testing UPVC Drainage class pipes of Foamcore Astral(SN 8) make in solvent cement joint for pipe to pipe connection & 1:1 cement sand joint for between chamber wall & pipe including cutting the pipe to required length, roughining of pipe at wall joint except socket as directed.

rmt

a) 110mm dia. (4") 182.05 b) 160 mm dia. (6") rmt 560.64

1.3 Constructing 900 X 450 mm (3'-0" X 1'-6") inspection chamber in 230mm thick brick in 1:5 cement sand mortar, 100 mm (4") thick 1:2:4 PCC coping to fix the frame & 1:3:6 PCC 6" thick bedding, necessary benching 20 mm (3/4") thick 1:3 waterproof cement plaster smooth inside & rough outside including supply of all materials for chamber, 900 x 450mm (3'-0" x 1'-6") C.I. manhole cover & frame of 100 KG. weight

nos. 27.00

1.5 Providing, Laying 1:3:6 PCC Bed below pipe/ encasing the pipes upto 1.2 M depth and beyond 3.0 M depth in 150 mm (6") thick PCC including benching, curing etc. as per standard. CUM 51.36

1.6 Constructing manhole chamber in 230 mm (9") thick upto 1.68 M depth & in 350 mm (14"). Thick beyond 1.68 M depth brick masonry in 1:5 cement sand mortar 100 mm (4") thick 1:2:4 PCC curb for fixing top 550 mm (21") dia & 1.2 M (4') dia at bottom 150 mm (6") thick 1:3:6 PCC bedding necessary benching 1:3 smooth water proof cement plaster inside and rough outside including supply of all materials for chamber, including dewatering, providing & fixing 500 mm (21") dia heavy (116 KG.) weight manhole cover & frame, C.I horse shoe type steps, complete. up to 2.1 M depth.

nos. 3.00

1.7 Constructing manhole chamber in 230 mm (9") thick upto 1.68 M depth & in 350 mm (14"). Thick beyond 1.68 M depth -DO - DO - from 2.1M to 3.0 M depth

nos 44.00

1.8 Constructing manhole chamber in 230 mm (9") thick upto 1.68 M depth & in 350 mm (14"). Thick beyond 1.68 M to 2.9 M depth & 450 thick beyond 3.0 M -DO - DO - from 3.1M to 4.0 M depth

nos. 16.00

1.9 Constructing manhole chamber in 230 mm (9") thick upto 1.68 M depth & in 350 mm (14"). Thick beyond 1.68 M to 2.9 M depth & 450 thick beyond 3.0 M -DO - DO - from 4.1M to 5.0 M depth nos. 6.00

1.13 Excavation in any type of soil by cutting and chiseling complete including stacking/ disposal of the same. Including backfilling ramping etc. complete.

cum 14703.72

1.15 Providing & Fixing Vent Shaft in RCC Construction of 5 mtrs. In height with Vent cowl on top for foul air release.

nos 12.00

1.16 Providing fixing testing and commissioning 0.9m x 0.9m x 1.0m deep Grease trap (0.60m liquid height) constructed out of 230 mm brick masonry with Stoneware Tee connection for inlet outlet & vent, CI Manhole cover and frame (Cover size 0.9 x 0.45 m wide) of heavy duty, 40 mm thick Kaddappa baffle wall situated across the chamber. Trap shall be internally smooth plastered with water proofing compound & externally rough plastered Complete with 2 Nos 0.4 M x 0.85 M x 0.1 M high SS 304. perforated trey's with handles on both side including all accessories mounting. complete as specified in drawing.

nos 3.00

1.17 Providing & Fixing RCC manhole cover size of 900 x 450 mm. for SEPTIC TANK nos 15.00 2. STORM WATER :

2.1 Providing & constructing rectangular storm water channel of 230 mm thick wall in cement block or Rmt


109

Item No.


1 2 3 4 bricks in 1:5 cement sand mortar, 1:3 cement sand plaster smooth inside & rough outside 100 mm (4") thick 1:2:4 PCC coping to fix the angle nosing at top, 100 mm (4)" thick 1:3:6 PCC at bottom, excavation, backfilling, bailing or pumping out etc. complete.

Rmt 1889.60 2.4 Constructing 600 mm X 900mm (24" X 36") inspection chamber in 230mm thick brick in 1:5 cement

sand mortar, 100 mm (4") thick 1:2:4 PCC coping to fix the frame & 1:3:6 PCC 6" thick bedding, necessary benching 20 mm (3/4") thick 1:3 waterproof cement plaster smooth inside & rough outside including supply of all materials for chamber,600 mm X 900mm (24" X 36") ) C.I. manhole cover & frame of 100 KG. weight

nos 24.00

2.5 Providing & laying RCC NP2 class Hume pipe in slope with RCC collar in cement sand joint in 1:3 proportion including cutting the pipes to required length, complete. rmt

d) 300 mm (12") dia. 40.00 2.9 Constructing 900 X 450 mm (3'-0" X 1'-6") inspection chamber in 230mm thick brick in 1:5 cement

sand mortar, 100 mm (4") thick 1:2:4 PCC coping to fix the frame & 1:3:6 PCC 6" thick bedding, necessary benching 20 mm (3/4") thick 1:3 waterproof cement plaster smooth inside & rough outside including supply of all materials for chamber, 900 x 450mm (3'-0" x 1'-6") C.I. manhole cover & frame of 100 KG. weight

nos 7.00

4. SOIL WASTE & VENT 4.1 Supplying, fixing & jointing with lead caulked joint & hemp C.I. soil variety centry pipe (IS 1729 for

50mm & IS 3989 for all other sizes) including cutting masonry or walls, etc. wherever necessary for making connections, fixing the pipe to Ceiling, including spare socket, scaffolding wherever necessary, painting the exposed faces with suitable anticorrosive paint and 2 coats of oil paint recommended by the Architect/ Consultant.

rmt

b) 75 mm (3") dia. 51.85 c) 100 mm (4") dia. rmt 79.10

4.2 Supplying, fixing & jointing with cast iron fitting such as Bends, Tees, Cross, Wye, etc. of required degree with access door with lead caulked joint. (Confirm IS 1729 for 50mm & IS 3989 for all other sizes). nos

b) 75 mm (3") dia. 21.00 c) 100 mm (4") dia. nos 15.00

4.3 Supplying, fixing & jointing with cast iron plain fitting such as bends, tees, cross, offsets, loose collar, reducers Wye etc. With lead caulked joint. (IS 1729 for 50mm & IS 3989 for all other sizes) nos

b) 75 mm (3") dia. 39.00 c) 100 mm (4") dia. nos 19.00

4.5 Providing & fixing PVC 10 kg class pipe of Approved make complete with PVC fittings with solvent cement joint such as bend, tee, coupling, elbow, Reducers etc. for urinal waste rmt

a) 50 mm (2") dia. 21.80 b) 40 mm (1 1/2") dia. rmt 37.00

4.6 Providing & fixing 75 mm dia (3") C.I. NAHNI trap in lead caulked joint nos 29.00 4.7 Supplying & fixing 100 mm dia x300 long CI W.C. pan connectors with lead caulked joint (as per

drawing) nos 19.00

4.9 Chasing of Brick wall for PVC/ GI waste pipe & making good the same with 1:3 cement sand plaster using Chicken wire mesh etc. complete. rmt 30.60

4.10 Making holes for pipes of 100 mm dia. & above in RCC/ Brick wall and making good the same. nos 40.00 4.12 Supplying & fixing M.S. Hanger/ brackets for pipes in welded construction, including 3 coats of

enamel paint over two coats of Red oxide primer. kg 249.90

4.13 S/F CI to GI adaptor with lead caulked jointer for Wash Basin/ sink waste of 65 mm Dia. nos 23.00 5. WATER SUPPLY :


110

Item No.


1 2 3 4 5.2 MDPE PIPES :Supplying, Cutting to required length, fixing, laying below ground PN 16 Blue MDPE

pipes of Kiplas piping system ltd. make conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC / CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water syatem The cost shall include testing, loading, unloading, stacking etc. complete as specified and directed.

Rmt

g) 250 mm (10") dia. 6.00 5.5 Supplying & fixing, cutting threading, laying, jointing & testing UPVC schedule 80 class pipes (to

ASTM–D–1785) of Supreme/ Finolex & ISI brand specials G.I. fittings (to I.S. 1239) such as tees, bends, elbows, couplings, etc. (excluding flange) drilling of holes in brick wall, white lead, cotton yarn, etc. complete.

rmt

a) 15 mm (1/2") dia. 102.05 b) 20 mm (3/4") dia. rmt 34.40 c) 25 mm (1") dia. rmt 46.85 d) 32 mm (1 1/4") dia. rmt 80.65 e) 40 mm (1 1/2") dia. rmt 40.91 f) 50 mm (2") dia. rmt 126.35 g) 65 mm (2 1/2") dia. rmt 3489.90

5.6 Providing & fixing screwed Zoloto MAKE BRASS BALL valve with lever for operation of approved quality (to IS 778-1971) 10 KG/ Sq.Cm. class. nos

a) 15 mm (1/2") dia. 3.00 b) 20 mm (3/4") dia. nos 4.00 c) 25 mm (1") dia. nos 7.00 d) 32 mm (1 1/4") dia. nos 5.00 e) 40 mm (1 1/2") dia. nos 3.00 f) 50 mm (2") dia. nos 19.00

5.7 Providing & fixing in position approved screwed G.M. float valves with copper ball cocks including effecting proper connection (best quality)

nos 3.00

5.10 Supplying & fixing C.I. LD manhole cover of 600 mm dia with locking arrangement for fixing on R.C.C. tank.

nos 11.00

5.14 Supplying & fixing 20 mm dia. hose bib with valve of 20 mm dia. (for gardening) nos 2.00 5.15 Constructing 300 X 300 X 300 mm deep brick masonry valve chamber in 1:5 cement sand mortar,

20 thick 1:3 water proof plaster smooth inside & rough outside, 100 mm 1:2:4 coping & 100 mm(4") thick 1:3:6 PCC beading, necessary excavation, backfilling, consolidation, C.I. frame & cover weight to be not less than 4.53 KG. etc. complete.

nos 4.00

5.16 Supplying & fixing M.S. Hanger/ brackets for pipes in welded construction, including 3 coats of enamel paint over two coats of Red oxide primer.

kg 108.80

5.17 Supplying & fixing Flanged CI no return valve IS 780 of Danfoss make with necessary nuts, bolts, rubber gaskets etc. complete. of approved make.

nos 8.00

5.20 Supplying, laying & jointing GI screwed flanges including welding to pipes, nuts, bolts, gaskets, etc complete.

nos 12.00

5.21 Constructing 900 X 450 mm valve chamber in 1:5 cement sand mortar ,100 mm (4") thick 1:2:4 PCC coping to fix the frame & 1:3:6 PCC 6" thick bedding, necessary benching, 20 mm (3/4") thick 1:3 water proof cement plaster smooth inside & rough outside including supply of all materials for chamber, 900 X 450mm (3'-0" X 1'-6") C.I. manhole cover & frame of 100 KG. weight

nos 4.00

5.28 Supplying, Fixing & Testing Pressure reducing Valve of Diaphram type with inbuilt strainer of Honeywell or Varie or TBS-OR make with necessary connectors.

nos


111

Item No.


1 2 3 4 a) 50mm (1 1/2") dia. 3.00

5.30 Hydro pneumatic systems

set

Domestic water (HBD make skid mounted Hydro pneumatic system) 1.00

5.31 Drinking water set

(HBD make skid mounted Hydro pneumatic system) 1.00

5.32 Flushing water: set

(HBD make skid mounted Hydro pneumatic system) 1.00

5.33 SUMP PUMP FOR PUMP ROOM DRAIN:

nos

Supplying, fixing, Testing & commissioning vertical foot mounted fully Submersible dewatering non clog sump pump of cast iron construction having bronze impeller, suitable for 1000 MM deep sump, capable of delivering 500 LPM at 15 M head 5 HP motor 2900 RPM (for Pump Room water Drain)

3.00

5.35 FILTRATION SYSTEM FOR WATER BODY set

WATER BODY PUMPS 2.00

5.36 FILTRATION SYSTEM FOR LAKE set

WATER BODY PUMPS 2.00

6. SANITARY FIXTURES & FITTINGS: 6.1 Supplying, Fixing HINDUSTAN CAT. NO. 20006 OR EQUIVALENT make Wall hung type water

closet, back inlet, P trap, C.I. chair type bracket with C.P. bolts Commander make white solid seat & white cover CP exposed type flush valve CAT NO. 1089 ALLIED CP Elbow C.P. wall flange, making necessary connection to G.I. flush/inlet pipe etc. fixing the W.C. pan over Rubber padding recessed by nuts, bolts, making joint in putty of white zinc including cutting the wall, making good the same etc complete.

nos 9.00

6.5 Supplying, Fixing HINDUSTAN OR EQUIVALENT make Orissa type water closet 580 x 440 mm in size with P/S trap with vent horn. Exposed CP Jaguar make Flush Valve, making connection to GI inlet / flush pipe Constructing brick masonry seat in 1:5 cement sand mortar Making joints -do-do-

nos 10.00

6.6 Supplying, Fixing Nirali OR EQUIVALENT make stainless steel single bowl sink with drain board size 1100 mm X 500 mm. Sink 550 x 420 x 220 mm deep mirror finished in 18.G stainless steel 316 material with 40 mm dia C.P. waste coupling & cup shaped S.S. strainer. M.S. brackets 40 mm dia brass C.P. `P' trap with cleanout plug, including fixing of sink below the counter, etc. complete.

nos 6.00

6.7 Supplying, Fixing HINDUSTAN make white colour wash basin size 550 mm X 400 mm with pair of CI brackets etc complete. nos 17.00

6.11 Supplying, Fixing 32 mm dia C.P. bottle trap with C.P. wall flange heavy duty of Jaquar CONTINENTAL 769 OR EQUIVALENT make.

nos 17.00

6.12 Supplying, Fixing 32 mm dia brass C.P. waste coupling for W.B. heavy duty of Jaquar CONTINENTAL 709 OR EQUIVALENT make.

nos 17.00

6.13 Supplying, Fixing 15 mm dia brass C.P. angle Stop cock for basin of Jaquar CONTINENTAL 053 OR EQUIVALENT make.

nos 41.00

6.14 Supplying, Fixing CP connectors of best quality with brass check nut (of 450mm length.) of Jaquar CONTINENTAL OR EQUIVALENT make

nos 32.00

6.15 Supplying, Fixing 15 mm dia. brass C.P. bib cock with wall flange of Jaquar CONTINENTAL 041OR EQUIVALENT make.

nos 10.00

6.18 Supplying, Fixing brass CP Pillar cock of heavy duty of Jaquar CONTINENTAL 021 OR EQUIVALENT make.

nos 17.00

6.19 Supplying, Fixing sink mixer with J shape spout with wall flange of heavy duty Jaquar CONTINENTAL 357 OR EQUIVALENT make. (Wall mounted)

nos 6.00

6.20 Supplying, Fixing CP Towel Ring of Jaquar CONTINENTAL 1121 OR EQUIVALENT Make. nos 13.00


112

Item No.


1 2 3 4 6.21 Supplying, Fixing Brass C.P. robe hook twin type of JAQUAR CONTINENTAL 1191 OR

EQUIVALENT make. nos 19.00

6.23 Supplying, Fixing JAQUAR CONTINENTAL 1151 OR EQUIVALENT make wall mounting type Brass CP toilet paper holder.

nos 19.00

6.25 Supplying, Fixing PVC Square Jali for Nahni trap dia of standard size Savita or APPROVED EQUIVALENT MAKE.

nos 29.00

6.27 Supplying, Fixing stainless steel Liquid soap dispenser of H 120 x W 90 x 100 mm Dia. size. OF APPROVED MAKE

nos 15.00

6.28 Supplying, Fixing 40 mm dia heavy duty Brass CP waste coupling for sink. nos 6.00 6.29 Supplying, Fixing Racold or Spherehot make instant type water heater with thermostat controls,

back pressure valve etc. complete nos 6.00

6.31 Supplying, Installation, Testing, Commisioning (Voltas Tushar or approved equivalent make) storage type water cooler of capacity 120 Ltrs. per hour, 30 C at inlet & 13.5 C at outlet point complete with inline water filter pressure reducing valve, suction cooler hermetic compressor equipped with overload protector, propeller type condencer fan, theRmtostat, non-toxic refrigerant material, 230 volts with proper earthing connection suitably modified to supply with one downtake S.S. pipe of 25 mm dia & making fix drain connection through flexible hose. 4 Nos specially designed C.P. press to pour faucet etc. complete.

nos 3.00

6.43 Supplying & Fixing Jaquar #563 OR EQUIVALENT make Jet spray Including flexible hose Jaquar 563 Make.

nos 19.00

6.47 Fixing Parryware make Half flat back Urinal with C.P. dome shaped grating C.P. west coupling, CP spreader, CP `P' trap including making connection to CI trap etc. complete.

nos 14.00

6.48 Supplying, Fixing 15 mm dia brass C.P. Push Button flush valv for Urinal of Jaquar make. nos 14.00 6.49 Supplying, Fixing 32 mm dia brass C.P. Spring flush valv for Orisa type WC of Jaquar make. nos 10.00

7 FIRE EXTINGUISHER

nos

7.1 Supplying & fixing dry powder type portable fire extinguisher with brackets for wall mounting &

necessary accessories.

a) 10 Kg. Capacity 2.00 7.2 Supplying & Fixing galvanised steel bucket of 9 ltrs. cap. with round bottom, cover painted with

post office red paint. nos 8.00

7.3 Supplying & Fixing CO2 gas type (4.5Kg.) fire extinguishers with initial fill, hose, wall brackets, including supply of nuts, bolts, etc. complete.

nos 2.00

7.4 Supplying & fixing foam type (9 ltrs cap.) fire extinguisher with brackets for wall mounting & necessary accessories. (D.G. Room)

nos 2.00

SECTION - 1.0 ELECTRICAL PANELS INSTALLATION

nos

1.1 Supply, Unloading at site, shifting to final location, assembling, leveling, grouting, erecting, testing

and commissioning of following panels as per drawings. Any sort of fabrication work required for erection of panel at site shall be done by the contractor. The contractor shall also check for all the loose joints and continuity of the panel. Any physical or technical defects envisaged by the contractor shall be brought to consultants knowledge. All section pillars shall be with stand of 600mm made from min 50 x 6 mm angles which shall be powder coated.

a Main Feeder pillar-1 1.00 b Main Feeder pillar-2 nos 1.00 c Feeder section pillar-1 nos 1.00 d Feeder section pillar-2 nos 1.00 e Feeder section pillar-3 nos 2.00 f Feeder section pillar-4 nos 1.00 g Utility panel-1 nos 1.00


113

Item No.


1 2 3 4 h Utility panel-2 nos 1.00 SECTION - 2.0 DISTRIBUTION BOARDS - FACTORY FABRICATED.

2.1 Supply installation testing and commissioning of 8 way per phase isolation type double door distribution board with 40 A FPMCB as incomer and per phase 1 nos 25 A DPELCB,100ma and 8 nos 6-32A SPMCB. (Pavillion & Café supply LDB)

nos 1.00

2.2 Supply installation testing and commissioning of 4 way VTPNDB double door distribution board with 32 A FPMCB as incomer and 4 nos 6-32A TPMCB. (FOR VTPNDB for All Kitchen Equipment)

nos 4.00

2.3 Supply installation testing and commissioning of 8 way SPN double door distribution board with 32 A DPMCB as incomer and 6 nos 6-32A SPMCB. (FOR LDB for All Kitchen and Pump rooms)

nos 5.00

2.4 Supply installation testing and commissioning of 4 way SPN double door distribution board with 20 A DPMCB as incomer and 2 nos 6-20A SPMCB. (FOR LDB for All Pavillion and Toilet block-H)

nos 7.00

2.5 32 A 3 phase PVC type industrial plug sockets of IP 44 category with FP MCB complete. (wiring for the same shall be paid in rmt)

nos 4.00

SECTION - 3.0 CABLES 3 Supply, Laying of cables on cable trays, structural supports and cable supports provided, include

unloading, shifting upto site. The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated out of M.S. strip 3 mm thick, Treasing and Clamping of Cable on cable tray, supply of all clamping materials and hardware etc., providing cable tags made out of aluminium strip and 75x20 mm in size with cable number and size punched on it. Cable tags shall be tied to cables at every 10 meter interval and at both the ends. All cables shall be of XLPE category as per specs. The rates shall be inclusive of digging trenches / back filling / sand bed (50mm) / brick cover - half round rcc pipes for cables to be laid direct in ground for external lighitng etc.

3.1 185 sq mm x 3.5 C A2XFY cable rmt 1000.00 3.2 95 sq mm x 3.5 C A2XFY cable rmt 1150.00 3.4 50 sq mm x 3.5 C A2XFY cable rmt 2825.00 3.5 35 sq mm x 3.5 C A2XFY cable rmt 1640.00 3.6 25 sq mm x 3.5 C A2XFY cable rmt 360.00 3.7 16 sq mm x 4C A2XFY cable rmt 368.00 3.8 6 sq mm x 4C A2XFY cable rmt 1544.00 3.9 4 sq mm x 4C A2XFY cable rmt 6687.05

3.11 4 sq mm x 3C 2XFY cable rmt 4714.00 SECTION - 4.0 CABLE TERMINATION 4 Supplying & fixing double compression type Brass glands & making joint with necessary AL.

crimping socket of long neck type connecting the same to various equipment like section pillar, switch, starter, motor etc. for the following sizes:

4.1 185 sq mm x 3.5 C A2XFY cable nos 2.00 4.2 95 sq mm x 3.5 C A2XFY cable nos 4.00 4.4 50 sq mm x 3.5 C A2XFY cable nos 10.00 4.5 35 sq mm x 3.5 C A2XFY cable nos 4.00 4.6 25 sq mm x 3.5 C A2XFY cable nos 2.00 4.7 16 sq mm x 4C A2XFY cable nos 18.00 4.8 6 sq mm x 4C A2XFY cable nos 18.00

5 Point wiring shall be done with supply, installation, testing and commissioning of 1.5 sq mm x 2 + 1.0 sq mm x 1 nos wires from modular switches to light outlet in concealed manner including FRLS grade wires with FRLS grade ISI PVC conduit of 25 mm diameter 1.6-2.0 mm thickness. Mains of

nos


114

Item No.


1 2 3 4 2.5 sq mm x 3 nos wires from D.B. to switchboard shall be shall be part of point rate. SITC of switches, sockets, regulators, blank plates, front plates, switchboard, PVC conduit and accessories like bends, couplers, MS fan boxes, connectors, ferruling, junction boxes, zarri making and semi finishing etc are part of the point rate. All wire ends shall be lugged properly and ferruled at both D.B. and S.B. end. All boxes shall be 1.6 mm thick M.S. boxes zinc passivated for S.B.. All wire sizes unless specified below shall be as per specifications.

5.1 One light point controlled by one single way 6 A switch. 195.00 5.4 One fan outlet point controlled by one 6 A switch and step type electronic regulator. nos 76.00 5.5 One 6 A x 5 pin 230 Volt socket outlet point controlled by one 6 A switch located on switch board. nos 28.00 5.6 6 A x 230 Volt 5 pin socket outlet point controlled by 6 A switch at convenient location including box

plate etc complete to be done with 2.5 sq mm ckt from D.B. nos 68.00

5.7 1 nos 6/16A x 230 Volt 5 pin socket outlet point with 16 A switch with box and plate complete to be done with 2.5 sq mm wire ckt from D.B. complete.

nos 35.00

5.8 Supply and Laying of 25 mm dia. rigid LHSFT category ISI marked PVC conduit of 2.0 mm wall thickness with all accessories complete with GI fish wire.

rmt 358.00

5.9 MAINS : - for three phase sockets / D.B. to D.B. / panel to UPS and UPS to UPS DB rmt

5.9.1 2 x 2.5 sq mm + 1 x 2.5 sq mm FRLS copper flexible wires in and including 25 mm dia rigid PVC

conduit of FRLS grade with wall thickness of 2.0 mm 434.00

5.9.2 4 x 4 sq mm + 1 x 2.5 sq mm FRLS copper flexible wires in and including 25 mm dia rigid PVC conduit of FRLS grade with wall thickness of 2.0 mm

rmt 350.50

5.9.3 2 x 4 sq mm + 1 x 2.5 sq mm FRLS copper flexible wires in and including 25 mm dia rigid PVC conduit of FRLS grade with wall thickness of 2.0 mm

rmt 424.00

5.9.4 4 x 6 sq mm + 1 x 4 sq mm FRLS copper flexible wires in and including 32 mm dia rigid PVC conduit of FRLS grade with wall thickness of 2.0 mm

rmt 16.00

SECTION -6.00 LIGHT FIXTURES & FANS : 6.0 Supply, Installation, testing & commissioning of standard light fittings and lighting accessories

including lamp.The scope shall include, providing of all hardware such as nuts,anchor fastners, bolts, screws, cleats, clamps, PVC insulated wires / cables from Junction box to lighting fixtures, ball and socket 'arrangement with J.B., suspension conduit pipe for drop if required. The cost for supports (wire ropes etc) shall be included in the cost. Contractor shall use Aluminium blanking foils for fixtures where by spilage of lights shall be visible through AC duct. All CFL / FTL fixtures shall be with APFC type electronic ballasts of less than 10% THD content and >0.95 pf. For LED drivers refer specifications. All CFL / FTL fixtures shall be with high lumen output lamps of Osram / Philiphs / GE. For LED lamps refer specs. All fixtures shall be of either Philips / Thorn / Ligman make for cat nos depicted below of one make as per approval. All the external light fixtures shall be with IP 65 junction boxes similar to sintex to mount driver and loop in loop out connector boxes.

6.1 Surface mounted 1 x 8W LED fixture, Degree of protection - IP65/IK08 -Philips cat no BWS150 or approved equivalent nos 55.00

6.2 Wall Light 1 x 8W LED fixture, Degree of protection - IP65/IK08 -Philips cat no BWS150 or approved equivalent

nos 20.00

6.3 Surface mounted type T5 box type fixture, IP65 dust & jet proof luminaire with polycarbonate housing & linear ribbed cover.Fixture should have polycarbonate fastening clips and hinged diffuser for easy lamp replacement.Fixture should be with Enegy saving 22W LED 4feet lamp having life of 40000 burning hrs.Philips TCW450 with 22W LED 4 feet lamp or approved equivalent.

nos 100.00

6.4 1200 mm dia ceiling fan - Crompton high speed with double ball bearinig and white colour. nos 35.00 6.5 300 mm dia exhaust fan of PVC body with louvers. Usha make - lexus model or approved

equivalent nos 29.00

6.6 300 mm dia wall fan of PVC body. Usha make - lexus model or approved equivalent nos 16.00 6.7 Supply, unloading, installation, testing and commissioning of 4.5 mtr pole from MS pipe (single

piece) of 76 mm dia and 3.25 mm thickness. The pole shall have base plate of 300 mm dia - 12 nos 150.00


115

Item No.


1 2 3 4 mm thick with 4 nos 10 mm dia holes for anchor fastners. The pole shall be mounted on foundation of 450 x 450 x 750 mm (foundation to be done by civil agency as per final design by structural consultant). The anchor fastners shall be of min 8 inches length and 10 mm dia. The anchor fastners shall be zinc coated (mungo anchor make or approved equivalent). The poles shall have junction box of IP 65 category with loop in loop out connector strip - 6A and 6A MCB for control of pole fixture. The pole shall be applied with 2 coats of redoxide / anti rust paint and then with 2 coats of automative paint of approved colour.

6.8 Providing spiral earthing using 8SWG 'GI' wire for street light pole. 'GI' wire buried to a minimum depth 1.5m. With excavation, refilling and connecting GI wire to pole using GI bolt and nut complete

nos 150.00

6.9 Supply and Laying of 3 core 1.5 sq mm Cu flexible wires in flexible / PVC rigid conduit of required size from junction box on poles / in ground to fixtures. rmt 3501.00

6.10 SITC of 8W 3000K LED Bollards, Degree of protection - IP65/IK10 8W LED bollard of 0.8m length with extrusion alumunium housing polycarbonate dffuser. Led & Driver life of 25000 burning hrs with 70% lumen maientance. Philips BCP150 or approved equivalent.

nos 155.00

SITC of 8W 3000K LED Bollards, Degree of protection - IP65/IK10 8W LED bollard of 0.8m length with extrusion alumunium housing polycarbonate dffuser. Led & Driver life of 25000 burning hrs with 70% lumen maientance. Philips BCP150 or approved equivalent.

nos, 90% of item no.

6.10

120.00

6.11 SITC of pole mounted fixtures 43W LED streetlight fixture with pressure die cast alumunium housing with life of 50000 burning hrs with 70% lumen maientance.Luminaire should be vibration resistant confirming to minimum IK05 protection. Heat management should be through external heat sink. Philips make BRP 320 or equvalent.

nos 15.00

6.12 SITC of 6W LED Planter Light, Degree of protection - IP65/IK08 LED plant up lighter 24D beam angle 3000k color temperature with 25000 burning hrs life with 70% lumen maintence. Fixture should have facility to mount on a spike. Philips BGP310+ZG P311 SPK or approved

nos 156.00

6.13 SITC of outdoor type LED strip light, Degree of protection - IP65/ Class-III - Philips cat no BCS-503/506/509/512 or approved equivalent

rmt 116.40

SITC of outdoor type LED strip light, Degree of protection - IP65/ Class-III - Philips cat no BCS-503/506/509/512 or approved equivalent

rmt 90% of item no.

6.13

13.20

6.14 SITC of Outdoor Ground burial outdoor type 16W LED lamp, Degree of protection - IP67/IK10 uplite fixture 24D beam angle color temperature of 3000K fixture should have life of 25000 burning hrs with 70% lumen maintence.Diameter of fixture should not exceed 150mm. Philips make BBP330 or approved equivalent.

nos 170.00

6.15 SITC of Post top type pole mounted 42W(including Power supply) IP65 3000K fixture with housing of die cast magnesium alloy polycarbonate diffuser fixture with life of 25000 burning hrs with 70% lumen maintenace.Diameter of fixture should not exceed 600mm. Philips BGP150 18 LED.

nos 135.00

6.16 SITC of IP67/IK10 wall recessed 3W LED light fixture with die cast alumunium housing,tempered glass diffuser,brushed stainless surface cover,with 25000 burning hrs life with 70% lumen maintenance.Philips BBG150 or approved equivalent.

nos 350.00

SECTION -7.0 EARTHING 7.1 Providing earthing stations for equipment earthing as shown and specified in IS:3043 together with

making earth pits of min 10 feet with alternate layers of salt and charcoal, earth chamber, CI lid cover, GI water pipe with funnel etc complete. nos

3mtr long and 25 mm dia, operation for a period of 7 yrs maintance free earthing system 24.00 7.2 Earth wire/ strips :

rmt

Supply and laying cu. / GI earthing strips for interconnecting the earthing stations, panels, DB's etc.

in built-up trenches, on walls/ ceiling, buried in ground generally as specified and shown on drawings complete with :


116

Item No.


1 2 3 4 B 25 x 6mm GI. strips. 80.00 SECTION -8.0 MISCELLANEOUS WORKS

8.1 Providing and laying of 100 mm dia 1.6 KG pressure PVC conduit with necessary accessories complete

rmt 1564.88

8.3 Providing and laying of 300 mm dia RCC hume pipe of NP2 class with collars etc complete rmt 3591.20 E1 Vertical bio wall Sqft. 510.00 E2 Sand stone statue of Buddha (3” height). No. 1.00 E3 Pedestal of sand stone tiles (15” X 28”X15”) No. 1.00 E4 Sand stone garden lights (1 feet) No. 2.00 E5 Sand stone balls (7” height) No. 2.00 E6 Water proof treatment Sqft. 350.00 E7 Tiles arrangements for lawn Sqft. 300.00 E8 Poly sheet for lawn Sqft. 600.00 E9 Fixing of tarpatri for bio wall & lawn Sqft. 800.00

E10 Haridwar stone for frame work Kg 800.00 E11 Fertile soil mix manures Cuft. 250.00 E12 Fixing of Mexican grass Sqft. 300.00 E13 Indoor plants No. 100.00 E14 Fountain with fiber tab (4’x 4’x 1.5’) No. 1.00 E15 Green nylon Net for protection of Plants Sqft. 700.00 E16 Replacement of Plants No. 100.00 E17 Pumping out water caused by springs tidal or river seepage, broken water mains or drains and like kilo lt. 21500.00 E18 Providing and laying Reinforced cement concrete pipe NP3 prestressed concrete pipe on first class

bedding.(laying Reinforce cement concrete pipe NP3 prestressed concrete pipe for culverts on first class bedding og granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works. backfilling ,concrete and masonary work in head walls and parapets). (A- 450 mm Dia)

Rmt 1254.80

E19 Supplying and stacking at site well-decayed Cow-dung manure from approved source including loading, unloading and carriage upto 10 km (manure measured in stacks will be reduced by 8% for payment) (for Horticulture work )

cum 1417.76

E20 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).

sqm 54528.57

E21 Extra for M-30 (using minimum cement 420 kg/cum concrete) cum 593.25 E22 Half brick thick brick masonry in Cement Mortar 1:4 ( 1 cement : 4 coarse sand ) with modular well-

burnt clay bricks of crushing strength not less than 25kg/sqcm and water absorption not more than 20% in superstructure above plinth level upto floor five level.

sqm 414.33

E23 Brick work in Cement Mortar 1:4 ( 1 cement : 4 coarse sand ) with modular Fly-Ash Lime Bricks (FALG Bricks ) confirming to IS: 12894-2002 of class designation 40 in foundation and plinth in:

cum 135.53

E24 a Pop up sprinkler (full/part)-Rain Bird nos 145.00 b Pop up spray head with rotary nozzle-Rain Bird nos 65.00 c Pop up spray head with VAN 12-Rain Bird nos 200.00

E27 Painting on new work (two or more coats) to give an even shade with: Aluminium paint sqm 4680.08


117

APPENDIX– D 20 INVENTORY OF Capitol Complex Integrated Development CCIID

Name of Work:- Construction of Capitol Complex Integrated Development at Naya Raipur

Detail of Fire fighting fitting for Welfare centre, Amenities Block A & A1

BOQ No. Description Unit

Qty. Remarks

W.C A.B -A A.B -A1

7.4 standard G.M. branch pipe with G.M. nozzle &

with 63 mm instantaneous type coupling No's 6 15 2 7.5 150 mm dia flanged C.I. tested Butterfly valve to IS

780 of Danfoss make with necessary nuts, bolts, rubber gaskets etc. Nos. 2 5 0

7.7 Providing & fixing single ball acting air release valve with 25 mm G.M. stop valve. Nos. 2 5 0

7.6 C.I. flanged tested Non return valve to IS 780 -do- -do- as above.

c 150 mm (6") dia. Nos. 0 1 0 7.9 mild steel fabricated fire hydrant hose cabinet with

glass front, suitable to house 2 length of canvas hose of 50' (15M) long & nozzle 2'3" X 2'0" X 1'0" size (70 X 60 x 30cm) painted in2 coats of post office red over a coat of red oxide primer. Nos. 6 15 2

7.10 fire hose cabinet door & frame, with glass front, fabricated out of heavy gauge M.S. channel powder coated in post office red colour of dimensions 1.8 M high X 1.0 M wide (or the nearest size to suit the site conditions) with double key & locking arrangement & support for wall groughting. All other specifications, finishes, door frame, hardware, etc. Nos. 2 6 0

7.11 65 mm dia X 15M long 2 Nos canvas hose pipe having 1 no male instantaneous coupling with pluger locking arrangement wired on either ends and screwed down type jet nozzle on either end. Nos. 6 15 2

7.12 drum type wall mounting hose reel swiveling 180 degree C having 20 mm dia 24 M long best quality approved make aRmtoured rubber hose pipe with 10 mmdia. outlet bronze jet nozzle & shut off cock on the outlet end & also one 20 mm dia. to 65 mm dia. male instantaneous type adopter on the inlet and supporting bracket etc. complete. Nos. 2 7 0

7.13 65 mm dia. twin hydrant outlet with separate control G.M. flanged best quality fire hydrant landing valve with companion flanges, nuts, bolts washers, gaskets etc. complete. as directed Nos. 2 7 0

7.14 65 mm dia. Single hydrant outlet with separate control G.M. flanged best quality fire hydrant landing valve with companion flanges, nuts, bolts washers, gaskets etc. complete. as directed. Nos. 4 8 2


118

7.17 dry powder type portable fire extinguisher with brackets for wall mounting & necessary accessories.

a 10 Kg. Capacity Nos. 2 b 5 Kg. Capacity Nos. 2

7.19 CO2 gas type (4.5Kg.) fire extinguishers with initial fill, hose, wall brackets, including supply of nuts, bolts, etc. complete. Nos.

7.20 Siamese fire brigade inlet connection having 4 Nos 65 mm dia. male instantaneous plunger locking type blank cap & chain as well as welded companion flanged & sundries like gasket inserts, bolts, nuts & washers & 150 mm dia. G.I. C class common stand pipe. (for Loop Charging) Nos. 0 1 0

7.23 foam type (9 ltrs cap.) fire extinguisher with brackets for wall mounting & necessary accessories.(D.G. Room) Nos. 0 0 4

7.26 Supplying fixing & Putting in working condition standard pressure gauge with 15 mm dia brass check nut &capable of showing pressure reading from 0.00 kg. to 15 kg. Nos. 0 2 0

7.27 screwed Brass Ball valve with wheel of Zoloto / President make quality (IS:778-1971) 20 Kg. class

a 15 mm (1/2") dia. Nos. 0 2 0 b 25 mm (1") dia. Nos. 2 7 0


119

Name of Work:- Construction of Capitol Complex Integrated Development at Naya Raipur

Detail of Fire fighting fitting for Security Barracks & Utility Block

\

BOQ No.

Description Unit Qty.

Remarks S.B U.B

7.4 standard G.M. branch pipe with G.M. nozzle & with 63 mm

instantaneous type coupling No's 4+6 6+6 7.5 150 mm dia flanged C.I. tested Butterfly valve to IS 780 of Danfoss

make with necessary nuts, bolts, rubber gaskets etc. Nos. 3 3 7.7 Providing & fixing single ball acting air release valve with 25 mm

G.M. stop valve. Nos. 3 3 7.6 C.I. flanged tested Non return valve to IS 780 -do- -do- as above. c 150 mm (6") dia. Nos. 1 0

7.9 mild steel fabricated fire hydrant hose cabinet with glass front, suitable to house 2 length of canvas hose of 50' (15M) long & nozzle 2'3" X 2'0" X 1'0" size (70 X 60 x 30cm) painted in2 coats of post office red over a coat of red oxide primer. Nos. 4+6 6+6

7.10 fire hose cabinet door & frame, with glass front, fabricated out of heavy gauge M.S. channel powder coated in post office red colour of dimensions 1.8 M high X 1.0 M wide (or the nearest size to suit the site conditions) with double key & locking arrangement & support for wall groughting. All other specifications, finishes, door frame, hardware, etc. Nos. 4 6

7.11 65 mm dia X 15M long 2 Nos canvas hose pipe having 1 no male instantaneous coupling with pluger locking arrangement wired on either ends and screwed down type jet nozzle on either end. Nos. 4+6 6+6

7.12 drum type wall mounting hose reel swiveling 180 degree C having 20 mm dia 24 M long best quality approved make aRmtoured rubber hose pipe with 10 mmdia. outlet bronze jet nozzle & shut off cock on the outlet end & also one 20 mm dia. to 65 mm dia. male instantaneous type adopter on the inlet and supporting bracket etc. complete. Nos. 4 6

7.13 65 mm dia. twin hydrant outlet with separate control G.M. flanged best quality fire hydrant landing valve with companion flanges, nuts, bolts washers, gaskets etc. complete. as directed Nos. 4 6

7.14 65 mm dia. Single hydrant outlet with separate control G.M. flanged best quality fire hydrant landing valve with companion flanges, nuts, bolts washers, gaskets etc. complete. as directed. Nos. 6 6

7.17 dry powder type portable fire extinguisher with brackets for wall mounting & necessary accessories.

a 10 Kg. Capacity Nos. 0 6 b 5 Kg. Capacity Nos. 4 6

7.19 CO2 gas type (4.5Kg.) fire extinguishers with initial fill, hose, wall brackets, including supply of nuts, bolts, etc. complete. Nos. 0 19

7.20 Siamese fire brigade inlet connection having 4 Nos 65 mm dia. male instantaneous plunger locking type blank cap & chain as well as welded companion flanged & sundries like gasket inserts, bolts, nuts & washers & 150 mm dia. G.I. C class common stand pipe. (for Loop Charging) Nos. 1 0

7.23 foam type (9 ltrs cap.) fire extinguisher with brackets for wall mounting & necessary accessories.(D.G. Room) Nos. 0 4


120

7.26 Supplying fixing & Putting in working condition standard pressure gauge with 15 mm dia brass check nut &capable of showing pressure reading from 0.00 kg. to 15 kg. Nos. 2 0

7.27 screwed Brass Ball valve with wheel of Zoloto / President make quality (IS:778-1971) 20 Kg. class

a 15 mm (1/2") dia. Nos. 2 0 b 25 mm (1") dia. Nos. 4 6


121

Construction of Capitol Complex-Integrated Infrastructure Development at Naya Raipur.

Central Promenade Works

S. No Item No.

Decription Item Unit Up to Date Qty.

Remark

1 2 3 4 5 6 B. WATER BODY

1. ROYAL CRYSTAL ARCH FOUNTAIN (A3&A7

1 B.1.1 Deep’ Royal Crystal Arch Fountain Nozzle All Brass construction Suits 2” BSP threads Female Threaded connection Cat No: DD-RCRS-2000

Nos 2.000

2 B.1.2 Screen Filter & mounting arrangement for Nozzle Nos 2.000

3 B.1.3 ‘Deep’ Under Water Lighting Fixture (IP-68) Lamp: 230V 300W Comptalux Lamp Body: All Copper construction Gasket:Special Nitrile RubberFastners: Stainless SteelLens: Toughned clearCat No. DD-UWL-230V-300W-C

Nos 12.000

4 B.1.4 Deep’ Light Mounting Stand fixed tandingCat No. DD-LMS-300-FX Nos 12.000

4 B.1.5 Deep’ Light Mounting unit for mounting lights Cat No. DD-LMU-3P-300 Nos 4.000

5 B.1.6 Colour Lens Nos 66.000

5 B.1.7 Deep’ Submersible Junction Box (IP-68)All gunmetal construction Compression Gland: Extruded Brass Fastner:Stainless SteelRubber Bush: Special Nitrile Rubber1.5” BSP female threaded connection DD-JB-8L

Nos 2.000

6 B.1.8 Electrical Control Panel Nos 2.000

7 B.1.9 Cables 1.5sq mm 3 core copper flexible cable Rmt. 21.000

8 B.1.10 Submersible Pump 3 HP Rmt. 2.000

8 B.1.11 2 ½” Plumbing (machine threaded)with Fittings In GI Rmt. 16.400

8 B.1.12 2 1/2” Ball Valve Nos 2.000

8 B.1.13 2” Conduitng Rmt. 77.800 2. CASCADE FOUNTAIN(A1&A5)

1 B.2.1 Deep’ Cascade Fountain NozzleAll gunmetal construction Suits 1.5” BSP threads , Female threaded connection DD-CAS- 150

Nos 18.000

2 B.2.2 Deep’ Under Water Lighting Fixture (IP-68) Lamp: 230V 300W Lamp Body: All Copper construction Gasket: Special Nitrile Rubber Fastners: Stainless Steel Lens: Sealed BeamDD-UWL- 230V300W-C

Nos 54.000

2 B.2.3 ‘Deep’ Light Mounting Unit for mounting lightsDD-LMU-3P-300 Nos 18.000

3 B.2.4 ‘Deep’ Light Mounting Stand fixed StandingDD-LMS-FX-300 Nos 54.000

4 B.2.5 ‘Deep’ Submersible Junction Box (IP-68) All gunmetal construction Compression Gland: Extruded Brass Fastner:Stainless SteelRubber Bush : Special Nitrile Rubber11/2” BSP female threaded connectionDD-JB-6L

Nos 2.000

5 B.2.6 Kirloskar Make Openwell submersible pump 10HP 3 Phase Nos 4.000

6 B.2.7 4” NRV with Flanges, Nuts and Bolts Nos 4.000

6 B.2.9 Cascade Fountain - Plumbing with fittings in PVC 10 kg Tested 1 ½” Rmt. 38.000

7 B.2.10 Cascade Fountain - Plumbing with fittings in PVC 10 kg Tested 6'' Rmt. 57.800

8 B.2.11 Electrical Control Panel Nos 2.000

9 B.2.12 Cables 1.5sw mm 3 core copper flexible cable Rmt. 273.000

10 B.2.13 Cables 6 sq mm 3 core copper flexible cable Rmt. 148.000


122

10 B.2.14 2" Conduting Rmt. 84.000 3. BUBBLER FOUNTAIN(A2.A4&A6)

1 B.3.1 ‘Deep’ Bubbler Fountain Nozzle Copper, Brass and Gunmetal construction Venturi air intake snorkel with airDD-BJ-150

Nos 63.000

2 B.3.2 Deep’ Under Water Lighting FixtureLamp: 230V 150W Comptalux LampBody: All Copper constructionGasket:Special Nitrile Rubber Fastners: Stainless SteelLens: Toughned clearDD-UWL-230V-150W-C

Nos 63.000

3 B.3.3 Kirloskar Make Openwell submersible pump 10HP 3 Phase Nos 9.000

4 B.3.4 Colour Lens Nos 63.000

5 B.3.5 Light Mounting Stand DD-LMS-FX-150 Nos 63.000

6 B.3.6 Deep’ Light Mounting Unit for mounting lightsDD-LMU-1P-150 Nos 63.000

7 B.3.7 Deep’ Junction Box 9L (IP-68) All Gunmetal construction Compression Gland: Extruded Brass Fastner: Stainless SteelRubber Bush: Special Nitrile Rubber 2” BSP female threaded connectionDD-JB-9L

Nos 3.000

8 B.3.8 1 ½” Valve in PVC Nos 81.000

9 B.3.9 Bubbler Fountain - Plumbing with fittings in PVC 10 kg Tested 6” Rmt. 516.900

10 B.3.10 Bubbler Fountain - Plumbing with fittings in PVC 10 kg Tested 4” Rmt. 31.750

11 B.3.11 Bubbler Fountain - Plumbing with fittings in PVC 10 kg Tested 1 ½” Rmt. 63.200

12 B.3.12 Cables 2.5 sq mm 3 core copper flexible cable Rmt. 857.000

12 B.3.13 Cables 6 sq mm 3 core copper flexible cable Rmt. 234.000

12 B.3.14 2" Conduting Rmt. 267.000

13 B.3.15 Electrical Panel Nos 3.000

4. 20000 LPH FILTER

1 C.4.1

20000 LPH capacity Imported High Rate Filter as filter media giving 4-6 micron filtration. Filter having a high strength HDPE/FRP seamless moulded filter tank with deep bed, Lateral under drain for high flow rates low pressure drop, quality 6 position multiport valve, with self seal barrel unions & quality salt resistant pressure gauge.

Nos 3.000

2 C.4.2 Kirloskar make 1HP Monoblock Pump set Nos 3.000

3 C.4.3 Suction Drains Nos 6.000

4 C.4.4 Floor Inlets Nos 36.000

4 C.4.5 Dozing Pump with Plastic Container for Chlorine and Allum Nos 3.000

5 C.4.6 Control Panel Nos 3.000

5 C.4.7 Plumbing from Filter & back 2” PVC Pipe with fittings Nos 3.000

5. 8000 LPH FILTER

1 C.5.1

8000 LPH capacity Imported High Rate Filter as filter media giving 4-6 micron filtration. Filter having a high strength HDPE/FRP seamless moulded filter tank with deep bed, Lateral under drain for high flow rates low pressure drop, quality 6 position multiport valve, with self seal barrel unions & quality salt resistant pressure gauge.

Nos 4.000

2 C.5.2 Kirloskar make 1HP Monoblock Pump set Nos 4.000

3 C.5.3 Suction Drains Nos 4.000

4 C.5.4 Floor Inlets Nos 16.000

5 C.5.5 Dozing Pump with Plastic Container for Chlorine and Allum Nos 4.000

6 C.5.6 Control Panel Nos 4.000

6 C.5.7 Plumbing from Filter & back 2” PVC Pipe with fittings Nos 4.000


123

S. No

Item No.

Decription Item Unit Amenity Block

Utility Block

Total qty Remark

8. Pumps and Hydro Systems

1 8.1 AIR CUSHION TANK

Supplying, fixing, erecting, testing & commissioning Diaphragm operated vertical Air caution tank of capacity 600 Ltrs. fabricated out of 8mm thick MS plate vessel should be suitable to operate at a maximum pressure of 15 Kg/Sqm and should be complete with necessary inlet & outlet connections for water, air & control.

Nos. 2.000 2.000 4.000

8.2 Domestic water (HBD make skid mounted Hydro pneumatic system)

Sets 1.000 1.000 2.000

a

Supplying, Fixing, Testing, erecting & Commissioning Vertical Stainless Steel inline pumps having 304 SS casing, 304 SS impellers, 304 SS shaft and driven by 5 HP 2900 RPM 415 Volts, 50 cycles, AC 3 phase TEFC motor. Each pumpshould be capable of delivering 150 LPM at 50 M head, from all causes. Pumps should have shut off head of about50 meters. - 3 Nos

b

Supplying Fixing Erecting, testing & Commissioning Vertical precharged diaphragm tank 100 Ltrs. suitable to operate at a maximum pressure of 15 Kg. and should be complete with necessary inlet & outlet connections for water, air and control. Vessel should be fitted with suitable rubber diaphragm to form partition between air & Water. - 1 No.

c

Supplying, Fixing, Testing, erecting & Commissioning Variable Speed drive Control panel with 1 No. Shnieider make Variable Speed drive controller and 1 No. Fixed speed drives for 3 X 5 HP pumps having 63 Amps incomming Isoalting switch fuse unit, Incomming volt meter with sector Switch branch ammeter for each pump motor phase indication lamps & 32 Amps branch MCBs for each motor should be provided. The control elements should include PID controller and pressure transducers. The drive should include the following protection features which shall be built into the units. Short circuits, over voltage, under voltage, adjustable overload, phase loss, stall prevention, over temperature of heat sink, charge system protection and over current. The Control circuit should be such that out of two pumps one pump should be with variable speed drive & other Pump should be withfixed Speed drive. The panel should include DP Hollond make Mega Control device for equal load sharing of pumps such that both the pumpes are run for same No. of hours.

d)

The mega control should start the first pump on VFD. The pressure transmitter should provide signal to the VFD thorugh the PID controller in such a manner that as long as the consumption is within the capacity


124

S. No

Item No.


Utility Block

Total qty Remark

of the one Variable Speed pump a constant pressure of 5 Kg/Sq. Cm should be maintained by varing the speed of the motor proportioned to damand. Should the consumption be more & the Variable Speed Pump cannot cope with the demand the mage control device will keep the first VFD pump running at its full speed and start the second pump on VFD. During peak load one pump will therefore be working on fixed speed and one pump on VFD. in case of no demand the mega device should builtup the speed of VFD pumps to its maximum RPM for a set time period to charge the diaphragm tank after which the same should be cut of and no pump should be operational in case of no consumption. The rates quoted should include all the power circuits with Switch, fuse units, DOL starters indicating lamps and

e) all internal wiring to ensure that the entire equipments works as a composite system. 1 No.

8.3 Flushing water: (HBD make skid mounted Hydro pneumatic system) (1-834/61 + 799/100)

Nos 1.000 1.000 2.000

a)

Supplying, Fixing, Testing, erecting & Commissioning Vertical Stainless Steel inline pumps having 304 SS casing,304 SS impellers, 304 SS shaft and driven by 10 HP 2900 RPM 415 Volts, 50 cycles, AC 3 phase TEFC motor. Each pump should be capable of delivering 250 LPM at 50 M head, from all causes. Pumps should have shut off head of about 50 meters. -3 Nos

b)

Supplying Fixing Erecting, testing & Commissioning Vertical precharged diaphragm tank 100 Ltrs. suitable to operate at a maximum pressure of 5 Kg. and should be complete with necessary inlet & outlet connections for water, air and control. Vessel should be fitted with suitable rubber diaphragm to form partition between air & Water. - 1 No.

c)

Supplying, Fixing, Testing, erecting & Commissioning Variable Speed drive Control panel with 1 No. shnieider make Variable Speed drive controller and 2 Nos. Fixed speed drives fo r 3 X 10 HP pumps having 63 Amps incomming Isoalting switch fuse unit, Incomming volt meter with sector Switch branch ammeter for each pump motor phase indication lamps & 40 Amps branch MCBs for each motor should be provided. The control elements should include PID controller and pressure transducers. The drive should include the following protection features which shall be built into the units. Short circuits, over voltage, under voltage, adjustable overload, phase loss, stall prevention, over temperature of heat sink, charge system protection and over current. The Control circuit hould be such that out of three pumps one


125

S. No

Item No.


Utility Block

Total qty Remark

pump should be with variable speed drive & Two Pumps should be with fixed Speed drive. The panel should include DP Hollond make Mega Control device for equal load sharing of pumps such that all pumpes are run for same No. of hours.

The mega control should start the first pump on VFD. The pressure transmitter should provide signal to the VFDthorugh the PID controller in such a manner that as long as the consumption is within the capacity of the one Variable Speed pump a constant pressure of 6.5 Kg/Sq. Cm should be maintained by varing the speed of the moto r proportioned to damand. Should the consumption be more & the Variable Speed Pump cannot cope with the demand the mage control device will keep the first VFD pump running at its full speed and start the second pump on VFD. During peak load one pump will therefore be working on fixed speed and one pump on VFD. in case of no demand the mega device should builtup the speed of VFD pumps to its maximum RPM for a set time period tocharge the diaphragm tank after which the same should be cut of and no pump should be operational in case of no consumption. The rates quoted should include all the power circuits with Switch, fuse units, DOL starters indicating lamps and all internal

e) all wiring to ensure that the entire equipments works as a composite system. 1 No.

8.4

SUMP PUMP FOR BASEMENT DRAIN: Supplying, fixing, Testing & commissioning vertical foot mounted fully Submersible dewatering non clog sump pump of cast iron construction having bronze impeller, suitable for 1000 MM deep sump, capable of delivering 500 LPM at 15 M head 5 HP motor 2900 RPM (for Pump Room water Drain)

Nos 2.000 2.000 4.000

8.5

Supplying, Erecting, Testing Commissioning Fully automatic control panel for 2 x 5 HP storm water pumps with high and low level controls. Complete with all integral wiring using Copper PVC insulated/ Tapped and colour coded wires/ flats of adequate size for all power/ control connections inclusive of necessary terminals etc. comprising.

Sets 1.000 1.000 2.000

8.9

A/C MAKEUP PUMPS Supplying, Fixing testing & commissioning HBD make multistage horizontal centrifugal pump set capable of delivering 1000 LPM at 65 M head due to all causes withTEFC squirrel cage induction motor of 2900 RPM, foundation bolts, etc. complete 15 HP (AC MAKE UP pumps )

Nos 2.000 2.000

8.10 Supplying, errecting testing & commissioning fully automatic control pannel for 2X5 HP

Nos 0.000 1.000 1.000

Documents

C- INVENTREY RFP for SELECTION OF FACILITY MANAGEMENT … · 2019-04-12 · rfp for selection of facility management service provider for mantralaya mahanadi bhawan, cciid, rajdhani