Generated by Unregis tered Batch DOC TO PDF Converter 2010.2.301.1358, please register!

How to buy good the iPhone 4S accessories

For his new machine to buy some iphone accessories and equipment, film, mobile phone sets

and other accessories are essential for the friend already got the iPhone 4S, the first thought in

the activation of the inspection, but some are new to the iPhone the new, optional, there are

many ambiguities.

iPhone 4S high-reflection coating

Can be seen from the name, the characteristics of high permeability membrane is its high light

transmission. Transmittance of poor mobile phone film will eye damage under normal

circumstances, the phone screen itself, the light intensity has been low, and then paste a poor

light transmission film is even more will increase eye fatigue, especially for using the mobile

phone read novels, play games, friends, film choice is more important, high-quality mobile phone

film transmittance of about 95%, while the poor in less than 80%. Generally good to high

permeability membrane will not only better restore the screen colors, and can protect the eyes,

so that has irreplaceable advantages in this high permeability membrane. But generally high

through the membrane is also very prone to a problem, oily skin and is very easy shot Khan's

friends left a lot of hands sweat and grease the foil on the basic film shortly after the phone

membrane becomes dirty, affecting operating experience and sliding effects.

Frosted film (right) compared with the effect of not foil phone

Matte film with high permeability membrane in the light transmittance in terms of slightly less

than, paste the matte film screen will appear hazy feeling, and the display will be relatively dim.

However, the advantages of matte film is that it basically will not be sticky fingerprints and

perspiration, the finger touch sense is also very comfortable, feel good, long-term use will not

affect the sliding fluency. The basic look and matte film in scratch-resistant performance is

relatively good, even if slight scratch will not be very obvious, especially in itself has some

scratches and bright dead pixel screen, paste the matte film does not come out.

iPhone 4S mirror mask

Mirror mask compared to the previous two film appeared slightly later, one of its main features is

the film positive there will be a mirror-like effect, like some of the car's windshield from the

outside, this mirror effect. This film is the lowest of the three kinds of film in the light

transmittance in terms of posted membrane basic phone will show a dim feeling, have a great

impact on the visual effects. The main advantage of this film is that you can better protect privacy,

if not positive, holding the phone is difficult to see on the screen shows the contents of the

locking of the phone screen, on the other hand, for the beauty of the female consumers, the film

can be used as a mirror to use.

Generated by Unregis tered Batch DOC TO PDF Converter 2010.2.301.1358, please register!

iPhone 4S cell phone protective shell buy

To protect your phone, in addition to the screen need to pay attention to the phone body and

ultimately, to take some protective measures, the common practice is to bring a protective shell.

IPhone 4S back with tempered glass material, it is easy to scratch, and user feedback information,

broke the rear glass are also many. Therefore, in order to better protect the hands of the iPhone

4S, a suitable protective shell is essential. Now available in a protective shell back shell,

protective shell, leather and borders three types.

iPhone 4S back shell protective shell

the iPhone 4S The carapace protection shell with integrated design, this protective shell will be in

addition to the entire phone body wrapped in the off-screen, including the corresponding side of

the bond, the power button and the camera will stay in the right hole, so that either to protect

the entire phone, and is also convenient to operate on the keys. The entire protective shell

possessed on the phone, do not come up with, like a cloth bag as it is extremely easy to use.

Protect the screen, but that the shortcomings of the protective shell is not very good and the

machine heat slightly effects, while a slight increase in the thickness of the phone.

iPhone 4S holster

The holster as a cell phone protective cover has been in existence for a long time, when the first

phone protective sleeve is the holster, when people are accustomed to at the waist with a leather

case, mobile phone, where, when used easily removed. With the introduction of touch screen

mobile phone, leather case also transition to the style can be opened, but most of the iPhone 4S

holster with this design. This holster can not only protect your phone back, the same time, the

screen is a much better protection. Of course, this will be some inconvenience, because each

received phone calls and control the phone when you need to first holster open, and the whole

phone before and after the parcel which is not conducive to heat dissipation, especially in a long

time to play the game.

iPhone 4S border

iPhone 4S border appearance somewhat similar to the signal circle before the follow-up of this

design inspiration is derived from this, I believe that Apple would not think of a signal that the

door can promote the birth of a new product. Such protective shell covering only the four sides

of the phone, the phone thickness slightly greater than the thickness, so bring the border, and

then the phone put on the table will not scratch the screen and back glass, but also because of

the before and after obscured in the heat better than the first two products. This protective shell

Generated by Unregis tered Batch DOC TO PDF Converter 2010.2.301.1358, please register!

of the disadvantage of the screen and back can not be well protected when the phone is dropped,

and generally easy to damage.

Enhanced endurance iPhone 4S external power supply

According to foreign media reports, the user response to the iPhone 4S battery iPhone4

shortened twice. This case Apple iOS 5.0 system worse. For mobile phones and a range of user

focus of attention, but fruit powder can not give up the iPhone 4S, then we only have another

way to extend its life. A relatively simple method is equipped with an external power supply such

products on the market is generally divided into two, one kind of like a portable charger, as to

connect the USB cable to charge the phone through the power and the other is similar to the

phone shell power supply.

iPhone 4S external charging power supply

The most common is this iPhone 4S charging through the USB cable for mobile power, such

power operation and normal charge similar mobile power supply is like a portable power supply,

the first home for mobile power and fully charged, meals and through the its charge directly to

the iPhone 4S, general product itself larger storage capacity, you can repeatedly charge for

mobile phones. However, due to the need to use the data cable and mobile phone connections,

coupled with the relatively large weight to carry is not very convenient.

iPhone 4S shell type mobile power

Another mobile power is similar in appearance to a mobile phone shell, within the same data line

interface, flat mouth, the bottom of the phone charging port at the power supply connector, and

then, where the power will be the iPhone 4S completely wrapped included. The effect is like a

thick point increase for the mobile phone, data line is not the same as before a product is

relatively convenient, and more portable. However, such mobile power generally heavy, after all,

it is not a real phone, internal storage battery, so this will not light the iPhone 4S is more

cumbersome.

Car owners the iPhone 4S necessary car bracket

iPhone 4S as a good intelligent machines, inevitably and ultimately support the GPS function,

regardless of their own built-in map navigation, or third-party navigation software can realize GPS

navigation capabilities, thus eliminating the cost of a purchase of GPS . The average car does not

own the car bracket, which need to be purchased separately, is now commercially available

iPhone 4S car bracket in shape is generally divided into adsorption-adsorption on the windshield

Generated by Unregis tered Batch DOC TO PDF Converter 2010.2.301.1358, please register!

bracket and placed in the car front panel the support bracket of two types.

iPhone 4S adsorption Bracket

Adsorption stent appeared earlier in a car bracket, before a lot of GPS bracket and MP4 stents

have adopted this design. Such stents commonly used suction cups to the bracket overall

adsorption on the front windshield on-the-horizon and perspective more easily select and adjust.

Bracket clamp part of the design does not compact or loose after prolonged use can easily lead to

phone dropped, so that will not only damage the phone, but also interfere with normal driving,

this design is not easy with the car charger charge the phone.

iPhone 4S support bracket

Support bracket generally are placed on the panel under the windshield, either directly open

stent phone support is from the lower part of the base of the fixed support such as the image

above, this design allows placing and the impact of the line of sight is also lower than in the

preceding paragraph product. This design is more conducive with the car charger to charge the

phone, and also to facilitate the manipulation of the drivers on the screen. However, the stent is

sometimes placed instability or the brakes fall, so will affect the use of mobile phone navigation.

He iPhone 4S accessories

For friends using the iPhone 4S, in addition to several of the above-mentioned accessories, there

are three parts is a lot of people are used, that is, car charger, SIM card restore Cato, capacitive

touch-screen gloves. In particular, capacitive touch-screen hand for friends, really is a very

intimate products.

the iPhone 4S car charger

In addition to the previously mentioned car bracket, car charger is an essential accessory of car

owners, especially during long-distance travel and car, in the case of run out of battery charge the

phone through the car charger is very convenient. General iPhone 4S car charger is a separate

charge head, inserted on the car's cigarette lighter to charge the phone with the data line protect

the life of the phone.

the iPhone 4S SIM card restore Cato

Apple iPhone 4 Micro SIM card design, because the country has always been the traditional SIM

card, so after buying the iPhone 4S will be facing a cut cards, the card after the cut can not be

placed directly on the ordinary phone restore Cato, for friends that want to use another phone

Generated by Unregis tered Batch DOC TO PDF Converter 2010.2.301.1358, please register!

you can purchase a SIM card, Micro SIM into which the gap can be reduced to a regular SIM card,

easy to operate.

Capacitance screen touch gloves

Since the iPhone 4S screen is capacitive touch screen, so only use finger touch operation, or use a

special capacitive stylus. When they go out in the cold winter, we will inevitably be wearing

gloves, if the phone rings, then have to pick the gloves can pick very inconvenient, but also very

cold hands. Capacitive screen touch gloves a good solution to this problem, in fact, it can not be

regarded as accessories, and a special kind of gloves, gloves in hand fingertip capacitive screen

material or coating, so that we do not pick the gloves can also answer the phone, is really a very

thoughtful design.

Today now share with you are some of the experiences and expertise about buying the iPhone 4S

accessories, after all, an iPhone 4S price is not low, good accessories not only better able to

protect your phone, but also the ability to upgrade the phone's battery life . In fact, the purchase

of spare parts and the purchase of other goods, the most important thing is not just for the sake

of small cheap to buy the product of some non-formal manufacturers, I hope everyone can buy

your favorite accessories, iPhone 4S safer personality.