DISC 25.4mm dia. x 3.2mm thickCAT# MAG-115 $2.50 each10 for $2.35 each

RING50mm O.D. x 44mm I.D. x 9mm.CAT# MAG-154 75¢ each10 for 70¢ each

FAST FRIENDLY SERVICE 77

W/ HOLE FOR COUNTERSUNK SCREW 20mm diameter x 4mm thick. 5mm hole beveled to 10mm for counter sunk #8 screw.CAT# MAG-149 $1.85 each 100 for $1.50 each

CYLINDER W/ HOLE12.1mm dia. x 9.5mm, 6.4mm hole. CAT# MAG-116 $1.75 each

DISC W/ HOLE15mm diameter x 3mm, 4mm hole. CAT# MAG-134 $1.00 each100 for 85¢ each

DISC10mm diameter x 2mm thick. CAT# MAG-143 3 for $1.20 100 for 35¢ each

BUTTON 9.5mm diameter x 5.1mm CAT # MAG-80 75¢ each 15 for 65¢ each • 105 for 50¢ each

0.95" SPHERICAL MAGNET0.95" (24.5mm) spherical magnet. Black in color with a shiny metallic finish. Fairly strong attraction and fun to play with or make magnetic sculpture.CAT # MAG-162 $1.50 each

ARC-SHAPED28mm long x 10mm x 3mm thick. Plated. Some scratches. CAT# MAG-147 60¢ each100 for 40¢ each

HIGH-VOLTAGE TASER COMPONENT

This little device converts 3.7 Volts to approximately 18,000 Volts. The main component in a taser/ stun gun, it creates quite a spark and a loud crackling noise when the probes are within 1/2" inch of each other. 1.35" x 1.55" x 0.31". The output leads have pointed probes attached.

Warning: Please operate this carefully to avoid injury to yourself or others. Do not touch probes to yourself or others when power is applied.CAT # HVS-01 $7.50 each

MINI-ABS CASES

GENERAL PURPOSE CASESBlack ABS cases with countersunk lid secured with self-tapping screws. Slots for mounting pc boards.

CAT # Dimensions w/o lid 1-9 10+1591-MSBK 3.3 x 2.2 x 0.8” 4.60 4.181591-ASBK 3.9 x 2.0 x 0.8” 4.60 4.181591-BSBK 4.4 x 2.4 x 1.1” 5.28 4.801591-CSBK 4.7 x 2.6 x 1.4” 5.78 5.261591-DBK 5.91 x 3.15 x 1.97" 11.45 10.45

INSTRUMENT CASESGray ABS plastic. Two piece tongue and groove construction. 0.064” brushed aluminum front and rear panels. Integral pc standoffs. Front and rear vertical pc board guides.CAT # Dimensions 1-9 10+1598-ASGY 6.1 x 3.65 x 1.36” 11.18 10.161598-BSGY 5.26 x 5.3 x 2” 12.50 11.36

Black or gray ABS plastic with inter-locking lid. Integral standoffs for pc boardmounting. Lid held in place with self-tapping #4 screws (included).

1.97” x 1.38” x 0.59”CAT# 1551-FBK Black 2.10 eachCAT# 1551-FGY Gray 2.10 each

1.97” x 1.38” x 0.8”CAT# 1551-GGY Gray 2.14 eachCAT# 1551-GBK Black 2.14 each

2.36” x 1.38” x 0.8”CAT# 1551-HGY Gray 2.36 eachCAT# 1551-HBK Black 2.36 each

3.15” x 1.57” x 0.8”CAT# 1551-KGY Gray 2.46 eachCAT # 1551-KBK Black 2.46 each

PROJECT ENCLOSURES

CASES w/ BATTERY COMPARTMENTSBlack ABS plastic cases with removable front panels and panel for battery compartment Integral pc board standoffs. Includes self-tapping screws. 9V batterieswon’t fit in CAT#s 1593-SBK & TBK.CAT# Dimensions 1-9 10+1593-PBK 2.6” x 3.54” x 1.1” 5.56 5.061593-QBK 2.6” x 4.4” x 1.1” 6.27 5.701593-SBK 2.6” x 3.6” x 0.83” 5.17 4.701593-TBK 2.6” x 4.35” x 0.83” 5.89 5.361593-YBK 2.6” x 5.45” x 1.1” 7.22 6.56

SHOP ON-LINE WWW.ALLELECTRONICS.COM78

DIECAST ALUMINUM ENCLOSURESAluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water.

1.99” x 1.99” x 1.23” CAT# 1590-LB$7.25 each • 10 for $6.80 each

3.64” x 1.52” x 1.23” CAT# 1590-A $7.05 each • 10 for $6.65 each

4.39” x 2.34” x 1.23” CAT# 1590-B$8.40 each • 10 for $7.90 each

5.76" x 4.79" x 1.55" CAT# 1590-XX$11.20 eachBlack smooth-gloss, polyester powder, finish. 4.4" x 2.4" x 1.2" CAT# 1590-BBK$12.82 each • 10 for $11.66 each

ECONOMY PROJECT BOXESABS plastic project enclosure. Inter-locking lid secured with self-tapping screws. Interior slots for PC boards. Includes hardware. Boxes are black, except CAT#s with “G” are grey.Dimensions CAT# 1-9 10+2.51" x 1.73" x 1.25" MB-131 3.00 2.752.53" x 1.75" x 1.37" MB-133 2.65 2.452.96” x 1.94” x 1.05” MB-163 3.00 2.753.95" x 3.02" x 1.60" MB-173 3.00 2.754" x 3" x 1.6" MB-173G 3.00 2.753.97" X 2.12" X 1.72" MB-132 3.00 2.754.33” x 2.24” x 0.83” MB-420 3.70 3.405.3” x 3” x 1.9” MB-113 4.85 4.505.30" x 3" x 1.9" MB-113G 4.50 4.00

PROJECT BOXES W/ MOUNTING FLANGESHigh-impact ABS plastic utility boxes. Black textured finish. Interlocking lid held in place with screws. Interior card guides for 1.6mm thick PC board. Mounting flange has counter-sunk screw holes and adds 1" to 1.25" to overall length of box.Dimensions CAT# Each3.25" x 2.10" x 1.20" MBF-20 3.005.12" x 2.68" x 1.72" MBF-22 4.506.18" x 3.78" x 2.10" MBF-24 6.35

ALUMINUM BOXES W/ MOUNTINGFLANGES6.01" x 3.24" x 2.05" CAT# 1590-P1F$29.76 each7.55" x 4.39" x 2.48"CAT# 1590-R1F $43.06 each7.38" x 4.70" x 2.05CAT# 1590-DF $35.98 each

ENCLOSURES WITH ALUMINUM COVERSHeavy-duty 3/32" molded plastic boxes with brushed aluminum covers. Built in stand-offs for PC or perf boards. Includes screws. Solderable perf boards Our CAT#s PC-1, 2, 3 and 4 (right) fit these cases.Dimensions CAT# 1-9 10+2.7” x 1.7” x 1.2” H TB-1 1.90 1.753.3” x 2.1” x 1.4” H TB-2 2.50 2.304.2” x 2.7” x 1.6” H TB-3 2.95 2.755.3” x 3.3” x 1.6” H TB-4 3.75 3.50

Two or three piece black ABS enclosures.

2.1" X 1.61" X 0.89"3-pieces. Bottom and one (long) side snap-fit in place. Mounting ears with holes on 2.6" centers.CAT# MB-96 $2.35 each10 for $2.00 each

3.56" X 1.50" X 1.20" Bottom snap-fits into place. Mounting ears with holes on 3.9" centers. 0.25" x 0.43" opening near the bottom of one long side.CAT# MB-97 $1.95 each10 for $1.70 each

SNAP-TOGETHER BOXES

SURFACE-MOUNT ENCLOSURE• Serpac WM072-I• Outside: 6.88" x 4.88" x 1.60", 7.87" across flanges• Interior: 6.43" x 4.43"• Black ABS plastic box and lid

• Circuit board mounting bosses• Self-tapping screws• Includes PS17 gasket for IP67, NEMA 4XCAT # MB-742 $7.75 each

PROJECT BOXES WITH 9V BATTERYCOMPARTMENTSABS plastic enclosures with 9V battery compartment with removable access panel. Interlocking lid secured with self-tapping screws. Interior slot for pc board. RED -- 4.10” x 2.61” x 1.50” CAT# MB-221 $3.95 eachBEIGE -- 5.63” x 3.25” x 1.54” Serpac # 251CAT# MB-251 $6.75 eachBLACK -- 6.88” x 4.88” x 1.54” Serpac # 271CAT# MB-271 $9.15 each

FAX YOUR ORDERS 24 HOURS A DAY (818) 781-265380

Holds three AA batteries for 4.5Vdc power.2.69" x 1.90" x 0.72".CAT# BH-AA3 $4.50 each

Module plugs into our solderless breadboards and provides 5V and/or 3V to the rails as well as other useful functions. Works with our breadboard, CAT# PB-400 (sold separately). 32 x 54 x 25mm (1.26" x 2.08" x 0.86").CAT# MB-PS $4.75 each

BREADBOARD POWER SUPPLY

BREADBOARD ACCESSORIES

BATTERY BOXES FOR BREADBOARDINGCompletely enclosed with slide-off cover. Integrated On-Off switch. 6" leads with machined male pins for use with solderless breadboards.Holds three AAA batteries for 4.5Vdc power. 2.49" x 1.45" x 0.62".CAT # BH-33A $3.65 each

Holds four AAA batteries for 6 Vdc power. 2.44" x 1.90" x 0.62".CAT # BH-43A $4.20 each

Pre-formed jumper wires for use with solderless breadboards. 14 color-coded lengths. AWG 22 solid wire. Unbreakable clear plastic storage case.

140 PIECE ASSORTMENT 10 of each sizeCAT # JW-140 $3.75 each350 PIECE ASSORTMENT 25 of each sizeCAT # JW-350 $13.50 each

JUMPER WIRE SETS

Terminated with machine pins for insertion intobreadboards and sockets.

ALLIGATOR CLIP JUMPERS6-piece set.CAT# TL-14 $6.95 per set

MINI-GRABBER JUMPERS 2-piece set.Red and black mini-grabbers.CAT# TL-15 $5.95 per set

TWEEZER TEST LEADSA must for testing small, in-circuit components. Shrouded banana plugs fit most test meters. Tweezer marked with + and - symbols. 5.9" long tweezer probe. Overall length of leads, 24".CAT # TL-126 $6.95 each

TEST LEADS WITH PIN PLUGSSet of red and black test leads with pin plugs. 22" long cables.CAT# TL-112 $2.25 set

ECONOMY TEST LEADSRed and black test probes with banana plugs.CAT# TL-100 $2.80 per set10 for $2.55 per set

TEST CABLES & CLIPSMULTIMETER TEST LEADSComfort grip probes with protective cap. Needle tip test probe, for easy access of hard to reach test points. Durable PVC insulated test leads with right-angle shrouded banana plugs. Banana plugs aremolded directly to the wire for superior pullstrength. Compatible with most multimeters that accept shrouded banana plugsCAT# TL-127 $9.95 / pair

MANUFACTURERSWe Purchase

Excess Inventories.CALL, WRITE, E-MAIL

or FAX your list.

SCOPE PROBESScope probe with BNC connector to match most equipment. Comes with ground lead, retractable hook tip, pin tip with IC lead cover and standard cover.100 mHz CAT# PR-100 $29.50 each200 mHz CAT# PR-200 $31.50 each

New Item

Adapter converts BNC male to dual binding posts, for connect-ion of banana plugs or wires.CAT # BNC-133 $6.50 each

BANANA JACK BINDING POSTS

New Item

Adapter converts BNC female to dual binding posts, for connect-ion of banana plugs or wires.CAT# BNC-134 $6.85 each