Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
www.GreenElectricalSupply.com
Note: This report is not valid as a BEST Test Report unless signed by an approved BEST Test Service Shenzhen Co., Ltd. This report shall not be reproduced except in full without the written approval of the testing laboratory. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of BEST’s Client and is provided pursuant to the agreement between BEST and its Client. BEST’s responsibility and Liability are limited to the terms and conditions of the agreement. BEST assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the BEST name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by BEST. The observations and test results in this report are relevant only to the sample tested. This report by itself does not cover that the material, product, of service is or has ever been under a BEST certification program. National Voluntary Laboratory Accreditation Program (NVLAP) has accredited this laboratory under ISO17025: 2005 for specific laboratory activities as listed in the NVLAP directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. This report must not be used by the client to claim product endorsement by NVLAP, NIST or any agency of the U.S. Government.
IESNA LM-79: 2008
Measurement and Test Report
for
SATCO PRODUCTS INC. 110 Heartland Boulevard, Brentwood, NY 11717
Jul 10, 2015
Product Name: LED corn bulb
Model No: S9351
Test Engineer: David Zhang
Report No.: BTR66.181.15.0005.02
Sample Received Date: May 04, 2015
Test Performed Date: May 04, 2015 to May 18, 2015
Reviewed By: Steven Hsu
Prepared By: BEST Test Service Shenzhen Co., Ltd. 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan,
Baoan, Shenzhen, China
TEL: +86-755-28236006
FAX: +86-755-23467087-811
Email: [email protected]
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 2 of 9 IESNA LM-79 Test Report
TABLE OF CONTENTS
1 - GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 3 1.2 OBJECTIVE ........................................................................................................................................................... 3 1.3 TEST FACILITY DESCRIPTION ............................................................................................................................... 3 1.4 TEST EQUIPMENT LIST ......................................................................................................................................... 4
2 - TEST METHOD ....................................................................................................................................................... 5 2.1 PHOTOMETRIC AND ELECTRICAL MEASUREMENT (INTEGRATED SPHERE METHOD) ......................................... 5 2.2 PHOTOMETRIC AND ELECTRICAL MEASUREMENT (GONIOPHOTOMETER METHOD) .......................................... 5 2.3 DEVIATION FROM STANDARD OPERATING PROCEDURE ....................................................................................... 5
3 – SUMMARY OF TEST RESULT ........................................................................................................................... 6
4 – SPECTRAL FLUX PLOTS ................................................................................................................................... 7
5 – EUT PHOTOS......................................................................................................................................................... 8
6 – LUMINOUS INTENSITY DISTRIBUTION TEST PLOTS (CIE CHROMATICITY) ....................................... 9
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 3 of 9 IESNA LM-79 Test Report
1 - GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT)
Applicant : SATCO PRODUCTS INC. Product Name : LED corn bulb Model No : S9351 Brand : SATCO Nominal Operation Voltage : AC 100-277V Nominal Power : 22W Nominal CCT : 5000K Nominal CRI : >80 Nominal Lumen Output : 2640Lumens Nominal Life Time : 40000Hours Number of hours operated prior to measurement for new sample : 0 Hours
Stabilization Time : 1.5 hours Total operating time for measurement include stabilization time : 3.5 hours
Date of Receiving Sample : May 04, 2015 Measurement quantities measured : 1 pcs Orientation During Testing : Base up Test Requested
:
Electrical and Photometric Test Luminous Intensity Distribution Test
1.2 Objective The following test report is prepared on behalf of SATCO PRODUCTS INC. in accordance with IESNA LM-79-08, used the following American National Standards or illumination Engineering Society of North America test guides: ANSI C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products; ANSI C79.1– 2002: American National Standard for Electric Lamps – Nomenclature for Glass Bulbs Intended for Use with Electric Lamps; ANSI C78.20 – 2003: American National Standard for Electric Lamps – A, G, PS, and Similar Shapes with E26 Medium Screw Bases; ANSI C78.21 – 2011: American National Standard for Electric Lamps – PAR and R Shapes; ANSI C78.24 – 2001: American National Standard for Electric Lamps – Two-inch (51 mm); Integral-reflector Lamps with Front Covers and GU5.3 or GX 5.3 Bases; ANSI/IEC C81.61-2003: American National Standard for Electric Lamp Bases; ANSI/IEEE C62.41 – 1991 (01-May-1991): Surge Voltages in Low-Voltage AC Power Circuits, Recommended Practice for; CIE Publication No. 13.3 – 1995: Method of Measuring and Specifying Color Rendering of Light Sources; CIE Publication No. 18.2 – 1983: The Basis of Physical Photometry; IESNA LM-16-1993: Practical Guide to Colorimetry of Light Sources; IESNA LM-28-89 – 1989: Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory; IESNA LM-79-08 Electrical and Photometric Measurement of Solid State Lighting Products UL 1993 – 1999: Standard for Self-Ballasted Lamps and Lamp Adapters; UL 8750 – 2009: Light Emitting Diode (LED) Equipment for Use in Lighting Products. 1.3 Test Facility Description The Energy Efficiency Lab used by BEST to collect energy efficiency measurement data is located in 1st Floor, 1st
Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China. BEST Test Service Shenzhen Co., Ltd
is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 4 of 9 IESNA LM-79 Test Report
Laboratory Accredited Program (Lab Code 200770-0). BEST Test Service Shenzhen Co., Ltd is also an ELI accredited
lab for lighting products (ELI Certificate No. ELI-L04-2010) and UL accredited lab for lighting products 1.4 Test Equipment List
Apparatus List Device Cal. Date Cal Due Date
1 Integral Sphere+ Spectrophotometer System Mar 10, 2015 Mar 09, 2016
2 Digital Power Meter Oct 18, 2014 Oct 17, 2015
3 Goniophotometer+ Spectrophotometer System Nov 20, 2014 Nov 19, 2015
4 Standard Light Source Sep 17, 2014 Sep 16, 2015
5 Standard Light Source Sep 17, 2014 Sep 16, 2015
6 Digital Storage Oscilloscope Oct 18, 2014 Oct 17, 2015
7 Ultra Compact Simulator Oct 20, 2014 Oct 19, 2015
8 Temperature Chamber Oct 20, 2014 Oct 19, 2015
9 Digital Caliper Nov 20, 2014 Nov 19, 2015
10 Digital CC&CV DC Power Supply(30V 5A) N/A N/A
11 5 1/2 Digital Multimeter Oct 18, 2014 Oct 17, 2015
12 Digital CC&CV DC Power Supply(120V 10A) N/A N/A
13 6 1/2 Digital Multimeter Oct 18, 2014 Oct 17, 2015
14 Digital Multimeter Oct 18, 2014 Oct 17, 2015
15 Temperature Recorder+Thermocouple Nov 20, 2014 Nov 19, 2015
16 Timer Controller Nov 20, 2014 Nov 19, 2015 Statement of Traceability: BEST Test Service Shenzhen Co., Ltd. certifies that all calibration has been performed using suitable standards traceable to the NIM China.
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 5 of 9 IESNA LM-79 Test Report
2 - Test Method 2.1 Photometric and Electrical Measurement (Integrated Sphere Method) Total light output (luminous flux) for the 25℃ ±1℃ ambient temperature conditions is measured using a 1.6m 4∏ geometry integrating sphere. Temperature is measured at a position inside the sphere. Spectral radiant flux measurements are made using Lab sphere to the detector port of the integrating sphere. Each lamp is operated at rated voltage in its designated orientation. Each lamp should be stable before measurements are made. The determining method of stable is as follows: Step 1 Take 3 measurements of the lamp light output at 15 minute interval (total time=30mintues.)This time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed 0.5 percent, the lamp is considered stable. Luminous flux, chromaticity coordinates, correlated color temperature and color rendering index for each lamp are calculated from the spectral radiant flux measurements taken at 2 nm intervals over the range 350 to 1050 nm. The calibration of the sphere photometer-spectrometer system is traceable to the NIST USA. Lamp efficacy (lumens per watts) for each lamp model is computed based on the revised luminous flux result. Electrical measurements including voltage, current, power and power factor are measured using the digital power Meter. The total uncertainty of the light output measurements is estimated, at the 95% confidence level, not to exceed ±1.12% over the wavelength range 350-1050 nm. 2.2 Photometric and Electrical Measurement (GonioPhotometer Method) A Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample; the photometric distance is 24m. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to be stable before measurement was made. Electrical measurements including voltage, current, power and power factor were measured using the Power Analyzer Before each measurement, the method below should be used to determine the lamp is stable or not. Step 1 Take 3 measurements of the lamp intensity at 15 minute interval (total time=30mintues.)This time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed 0.5 percent, the lamp is considered stable. Some graphics were created with Photometric Plus software. 2.3 Deviation from standard operating procedure None.
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 6 of 9 IESNA LM-79 Test Report
3 – Summary of Test Result
Item Test Result Accreditation
Required Fields
Lumen Output (Lumens) 2875.31 NVLAP/EPA
Luminous Efficacy (lm/w) 129.69 NVLAP/EPA
Correlated Color Temperature (CCT) 5236 NVLAP/EPA
Color Rendering Index– CRI 81.6 NVLAP/EPA
Input Power (W) 22.17 NVLAP/EPA
Optional Fields
Power Type AC DC /
Input Voltage (V) 120.0 NVLAP/EPA
Input Current (A) 0.1899 NVLAP/EPA
Power Factor 0.9725 NVLAP/EPA
x(CIE 1931) 0.3394 NVLAP/EPA
y(CIE 1931) 0.3578 NVLAP/EPA
u’ (CIE 1976) 0.2052 NVLAP/EPA
v’ (CIE 1976) 0.4868 NVLAP/EPA
Duv(CIE 1976) 0.0054 NVLAP/EPA
R9 4 NVLAP/EPA
Beam Angle: (Degree) 311.0 NVLAP/EPA
Center beam candlepower: (cd) 303.5 NVLAP/EPA
Zonal lumen density (0-60°): 26.5% NVLAP/EPA
Zonal lumen density (60-90°): 29.5% NVLAP/EPA
Zonal lumen density (90-120°): 27.8% NVLAP/EPA
Zonal lumen density (120-180°): 16.2% NVLAP/EPA
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 7 of 9 IESNA LM-79 Test Report
4 – Spectral Flux Plots
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 8 of 9 IESNA LM-79 Test Report
5 – EUT Photos
SATCO PRODUCTS INC. Model: S9351
Report No.BTR66.181.15.0005.02 Page 9 of 9 IESNA LM-79 Test Report
6 – Luminous Intensity Distribution Test Plots (CIE Chromaticity) This page is blank and see next page.
BEST TEST SERVICE SHENZHEN CO.,LTD Page 1 Of 14
LUMINAIRE PHOTOMETRIC TEST REPORT
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
UNIT:cdC0/180, 155.2,156.6
UNIT:cd
C90/270, 154.0,156.2
AVERAGE BEAM ANGLE(50%):311.0 DEG
0
60
120
180
240
300
LUMINOUS INTENSITY DISTRIBUTION DIAGRAM PLANAR ISOLUX DIAGRAM(UNIT:lx)
MH=1m
S(m)0
1
2
3
90
80
70
60
50
40
3020
100
C(DEG)
13011094.079.063.0
47.016.07.904.701.60
DATA OF LAMP PHOTOMETRIC DATA Eff: 129.69 lm/W
MODEL
NOMINAL POWER(W)
RATED VOLTAGE(V)
NOMINAL FLUX(lm)
LAMPS INSIDE
TEST VOLTAGE(V)
Imax(cd)
LOR(%)
TOTAL FLUX(lm)
CIE CLASS
up(%)
down(%)K
K
S/MH(C0/180)
S/MH(C90/270)
UP,DN(C0-180)
UP,DN(C180-360)
CIBSE SHR NOM
CIBSE SHR MAX
K
K
S9351
22
120.0
2875.31
1
120.0
303.5
100.0
2875.3
DIFFUSE
44.0
56.0
2.36
2.30
21.7,27.8
22.3,28.1
2.00
0.00
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 2 Of 14
ZONAL FLUX DIAGRAMAND LUMINANCE LIMITATION CURVES
ZONAL FLUX DIAGRAM:
�J
10 0- 10
20 10- 20
30 20- 30
40 30- 40
50 40- 50
60 50- 60
70 60- 70
80 70- 80
90 80- 90
100 90-100
110 100-110
120 110-120
130 120-130
140 130-140
150 140-150
160 150-160
170 160-170
180 170-180
C0 C45 C90 C135 C180 C225 C270 C315 zone total %lum,lamp��J ) )
DEG LUMINOUS INTENSITY:cd UNIT:lm
158.8 159.3 157.6 155.1 154.6 154.1 154.5 155.9 14.57 14.57 0.51,0.51
187.9 190.6 186.2 182.9 181.7 181.8 179.9 184.8 48.26 62.83 2.19,2.19
225.6 232.5 217.4 214.0 217.1 221.3 212.3 218.4 93.84 156.7 5.45,5.45
261.1 266.0 249.1 249.0 253.3 258.3 248.6 252.4 149.9 306.6 10.7,10.7
282.0 286.3 264.9 265.7 276.8 288.6 265.8 269.1 205.1 511.7 17.8,17.8
287.5 294.5 267.7 268.1 288.5 302.5 270.3 272.6 249.0 760.7 26.5,26.5
282.3 290.1 259.3 262.0 285.9 302.0 263.2 265.6 275.5 1036 36,36
271.9 281.9 249.4 251.9 276.1 296.2 252.5 253.8 285.2 1321 46,46
273.6 284.3 249.4 251.2 273.2 294.7 251.1 254.2 287.6 1609 56,56
270.9 280.9 247.3 248.4 268.5 293.4 249.7 252.0 288.3 1897 66,66
259.9 268.1 237.1 238.3 254.2 282.1 240.6 241.9 272.6 2170 75.5,75.5
238.3 244.9 217.7 220.2 230.9 260.4 222.6 222.7 240.5 2410 83.8,83.8
204.8 210.5 187.2 191.9 199.3 225.5 194.9 193.8 194.7 2605 90.6,90.6
157.3 161.6 148.7 154.3 161.1 173.7 157.5 154.2 140.3 2745 95.5,95.5
100.8 104.5 94.63 100.0 107.9 109.8 105.1 99.58 83.37 2829 98.4,98.4
50.15 49.76 47.22 52.14 57.83 57.63 57.76 59.74 36.70 2865 99.7,99.7
9.107 8.745 9.073 11.61 12.96 13.80 13.47 13.87 9.383 2875 100,100
0 0 0 0 0 0 0 0 0.4681 2875 100,100
LUMINANCE LIMITATION CURVESGLARE CLASS ILLUMINANCE (lx)
1.15 A 2000 1000 500 <=300
1.50 B 2000 1000 500 <=300
1.85 C 2000 1000 500 <=300
2.20 D 2000 1000 500 <=300
2.55 E 2000 1000 500 <=300
a b c d e f g h
45
55
65
75
85G(DEG)
8 1000 2 3 4 5 6 8 10000 2 3 4 1
2
3
4
68
a/h
LUMINANCE (cd/(m2))
a b c d e f g h
C0/180 C90/270
LUMINANCE cd/(m2)
G(DEG) C0/180 C90/270
85 1561422 1423676
80 783030 718096
75 534767 490911
70 412759 379136
65 337947 312369
60 287454 267699
55 250036 233843
50 219350 206059
45 193133 182555
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 3 Of 14
CU AND LUMINAIRE BUDGETARY ESTIMATE DIAGRAM
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
cc
w
fc
U
U
U
RCR Coefficients of Utilization(CU)RCR:Room Cavity Ratio
80%
50% 30% 10%
20%
70%
50% 30% 10%
20%
50%
50% 30% 10%
20%
30%
50% 30% 10%
20%
10%
50% 30% 10%
20%
0
0
0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
1.09
.88
.74
.63
.55
.48
.43
.38
.34
.31
.28
1.09
.82
.65
.54
.45
.38
.33
.29
.26
.23
.20
1.09
.76
.58
.46
.38
.31
.26
.23
.20
.17
.15
1.01
.81
.68
.58
.50
.44
.39
.35
.32
.29
.26
1.01
.76
.61
.50
.42
.36
.31
.27
.24
.21
.19
1.01
.71
.54
.43
.35
.29
.25
.21
.18
.16
.14
.87
.68
.57
.49
.42
.37
.33
.30
.27
.24
.22
.87
.64
.51
.42
.35
.30
.26
.23
.20
.18
.16
.87
.61
.46
.37
.30
.25
.21
.18
.16
.14
.12
.74
.57
.47
.40
.35
.31
.27
.24
.22
.20
.19
.74
.54
.43
.35
.29
.25
.22
.19
.17
.15
.14
.74
.51
.39
.31
.25
.21
.17
.15
.13
.11
.10
.62
.46
.38
.32
.28
.24
.22
.20
.18
.16
.15
.62
.44
.35
.28
.23
.20
.17
.15
.13
.12
.11
.62
.42
.32
.25
.20
.16
.14
.12
.10
.09
.08
.56
.37
.27
.20
.16
.13
.11
.09
.08
.07
.06
AREA(m2)10 20 30 40 50 70 100 200 300 500 700 1k 2k 3k 4k 5k 7k
2
3
4
5
6789
10
20
30
40
50LAMPS LUMINAIRE BUDGETARY DIAGRAM
4
55
66
H=7H=7
44
55
66
H=7H=7 CONDITIONS
FLUX 5000lm
FACTOR 0.70
Hdown 0.00m
Hwork 0.00m
Ework(AVE) 100lx
U���� cc w fc
70 50 30
50 30 20
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 4 Of 14
WEC AND CCEC
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
cc
w
fc
U
U
U
RCR Wall Exitance Coeffcients(WEC)RCR:Room Cavity Ratio
80%
50% 30% 10%
20%
70%
50% 30% 10%
20%
50%
50% 30% 10%
20%
30%
50% 30% 10%
20%
10%
50% 30% 10%
20%
0
0
0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
.421
.351
.306
.272
.245
.223
.205
.189
.176
.164
.239
.192
.163
.141
.125
.112
.101
.093
.085
.079
.076
.059
.049
.042
.036
.032
.029
.026
.024
.022
.400
.332
.289
.256
.231
.210
.193
.178
.165
.154
.228
.183
.155
.134
.119
.106
.096
.088
.081
.075
.072
.056
.047
.040
.035
.031
.027
.025
.023
.021
.361
.297
.257
.227
.204
.185
.170
.157
.145
.136
.207
.165
.139
.120
.106
.095
.086
.078
.072
.066
.066
.051
.042
.036
.031
.028
.025
.022
.020
.019
.326
.264
.227
.199
.178
.162
.148
.136
.127
.118
.188
.148
.124
.107
.094
.084
.076
.069
.063
.059
.060
.046
.038
.032
.028
.025
.022
.020
.018
.017
.293
.234
.199
.174
.155
.140
.127
.117
.109
.101
.170
.132
.110
.094
.083
.074
.066
.060
.055
.051
.055
.042
.034
.029
.025
.022
.019
.018
.016
.015
cc
w
fc
U
U
U
RCR Ceiling Cavity Exitance Coefficients(CCEC)RCR:Room Cavity Ratio
80%
50% 30% 10%
20%
70%
50% 30% 10%
20%
50%
50% 30% 10%
20%
30%
50% 30% 10%
20%
10%
50% 30% 10%
20%
0
0
0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
.526
.526
.521
.514
.506
.499
.492
.485
.478
.472
.466
.526
.493
.472
.457
.445
.436
.429
.423
.418
.413
.409
.526
.464
.431
.412
.399
.390
.384
.379
.376
.373
.371
.450
.450
.446
.441
.435
.429
.423
.417
.412
.407
.402
.450
.424
.406
.394
.385
.378
.371
.366
.362
.359
.355
.450
.399
.373
.357
.346
.339
.334
.331
.328
.326
.324
.307
.308
.306
.302
.299
.295
.292
.288
.285
.282
.279
.307
.291
.281
.274
.268
.264
.260
.257
.254
.252
.250
.307
.276
.260
.250
.244
.240
.237
.234
.233
.231
.230
.176
.177
.176
.175
.173
.171
.169
.167
.166
.164
.163
.176
.169
.164
.160
.157
.155
.153
.151
.150
.149
.148
.176
.161
.152
.148
.144
.142
.141
.139
.139
.138
.137
.056
.057
.057
.056
.056
.055
.055
.054
.054
.053
.053
.056
.054
.053
.052
.051
.051
.050
.050
.049
.049
.049
.056
.052
.050
.048
.047
.047
.046
.046
.046
.046
.046
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 5 Of 14
UGR(Unified Glare Rating) Table
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
ceiling/cavity
walls
working plane
Room dimensions Viewed crosswise Viewed endwise
0.7 0.7
0.5 0.5
0.2 0.2
0.7 0.7
0.3 0.3
0.2 0.2
0.5 0.5
0.5 0.5
0.2 0.2
0.5 0.5
0.3 0.3
0.2 0.2
0.3 0.3
0.3 0.3
0.2 0.2
x = 2H y = 2H
3H
4H
6H
8H
12H
4H 2H
3H
4H
6H
8H
12H
8H 4H
6H
8H
12H
12H 4H
6H
8H
29.4 29.2 30.5 30.3 30.2 30.0 31.4 31.2 32.4 32.2
32.5 32.2 33.5 33.3 33.3 33.0 34.4 34.1 35.5 35.2
34.2 33.9 35.2 34.9 35.1 34.8 36.1 35.8 37.2 36.9
36.2 35.8 37.2 36.7 37.1 36.7 38.0 37.6 39.2 38.8
37.3 36.9 38.2 37.8 38.2 37.8 39.1 38.7 40.3 39.8
38.6 38.1 39.5 39.0 39.5 39.0 40.4 39.9 41.5 41.1
30.4 30.3 31.4 31.3 31.3 31.1 32.3 32.2 33.4 33.3
33.6 33.4 34.5 34.3 34.5 34.3 35.4 35.2 36.5 36.3
35.4 35.2 36.2 36.0 36.3 36.1 37.2 36.9 38.3 38.1
37.5 37.2 38.2 37.9 38.4 38.1 39.2 38.9 40.4 40.1
38.7 38.4 39.4 39.0 39.6 39.3 40.3 40.0 41.5 41.2
40.1 39.7 40.7 40.3 41.1 40.7 41.7 41.3 42.9 42.5
36.2 36.0 36.9 36.7 37.1 36.9 37.8 37.6 39.0 38.8
38.5 38.3 39.1 38.9 39.4 39.2 40.0 39.8 41.3 41.1
39.8 39.6 40.3 40.1 40.8 40.6 41.3 41.1 42.6 42.3
41.4 41.1 41.9 41.6 42.4 42.1 42.9 42.6 44.1 43.8
36.4 36.2 37.0 36.8 37.3 37.1 37.9 37.8 39.2 39.0
38.8 38.6 39.3 39.2 39.8 39.6 40.3 40.1 41.6 41.4
40.3 40.1 40.7 40.5 41.3 41.1 41.7 41.5 43.0 42.8
Variations with the observer position at spacings:
S = 1.0H + 0.1 / - 0.1 + 0.1 / - 0.1
1.5H + 0.2 / - 0.2 + 0.2 / - 0.3
2.0H + 0.3 / - 0.4 + 0.3 / - 0.4
CIE Pub.117 Corrected 2875 lm Total Lamp Luminous Flux.(8log(F/F0) = 3.7)
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 6 Of 14
UTILIZATION FACTORS TABLE
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
REFLECTANCE
Ceiling
Walls
Working plane
0.8
0.7
0.2
0.8
0.5
0.2
0.8
0.3
0.2
0.7
0.7
0.2
0.7
0.5
0.2
0.7
0.3
0.2
0.5
0.7
0.2
0.5
0.5
0.2
0.5
0.3
0.2
0
0
0
ROOM INDEX UTILIZATION FACTORS(PERCENT) k(RI) x RCR = 5
k = 0.60 36 23 16 35 23 16 32 21 15 7
0.80 45 31 22 43 30 22 38 27 20 11
1.00 52 38 29 49 36 27 44 35 25 14
1.25 59 45 35 56 43 34 49 38 30 18
1.50 65 51 41 60 48 39 53 42 35 20
2.00 72 59 50 68 56 47 58 49 42 25
2.50 78 65 56 72 61 53 62 54 47 28
3.00 82 70 62 76 66 58 65 58 51 31
4.00 87 77 69 81 72 65 69 63 57 35
5.00 90 82 75 84 77 70 72 66 61 38
ROOM INDEX UF(total) Direct
According to DIN EN 13032-2 2004 SHRNOM = 1.25Suspended
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 7 Of 14
ISOCANDELA DIAGRAM
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
-90-90
-80
-80
-70
-70
-60
-60
-50
-50
-40
-40
-30
-30
-20
-20
-10
-10
0
0
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
HORIZONTAL(DEG)
VERTICAL(DEG)
Imax:303.5(H-39.5,V55.5) (At:C=225.0,Gamma=64.0)
UNIT: cd
10% 30.3520% 60.7030% 91.0540% 121.450% 151.860% 182.170% 212.580% 242.890% 273.2
Conical surface Flux(90deg):402.79 lm%lum = 14.0%%lamp = 14.0%
Conical surface Flux(120deg):760.69 lm%lum = 26.5%%lamp = 26.5%
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 8 Of 14
AAI Figure
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
1m3.281ft
200.00cm6.562ft
128.2,158.2lx11.91,14.69fc
2m6.562ft
400.00cm13.12ft
32.05,39.54lx2.978,3.674fc
3m9.843ft
600.00cm19.69ft
14.25,17.57lx1.323,1.633fc
4m13.12ft
800.00cm26.25ft
8.013,9.886lx0.7445,0.9184fc
5m16.4ft
1000.00cm32.81ft
5.129,6.327lx0.4765,0.5878fc
Height Eavg,Emax DiameterAngle:90.00deg
Flux out:402.8 lm
Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance.
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 9 Of 14
ISOLUX DIAGRAM
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
128.7' 39.23m
103.0' 31.39m
31.39m
103.0'
77.2' 23.54m
51.5' 15.69m
15.69m
51.5'
25.7' 7.85m
0.0' 0.00m
0.00m
0.0'
25.7' 7.85m
51.5' 15.69m
15.69m
51.5'
77.2' 23.54m
103.0' 31.39m
31.39m
103.0'
128.7' 39.23m
MOUNTING HEIGHT: 33'(10.0m)
3% 0.0472lx 0.004382fc
5% 0.0786lx 0.007304fc
10% 0.1572lx 0.01461fc
30% 0.4717lx 0.04382fc
50% 0.7862lx 0.07304fc
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 10 Of 14
Planar Illuminance Curve
Planar Illuminance Curve
-25 -20 -15 -10 -5 0 5 10 15 20 25
Distance(m)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2E(lx) MH = 10 m
C0/180
C90/270
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
BEST TEST SERVICE SHENZHEN CO.,LTD Page 11 Of 14
LUMINOUS DISTRIBUTION INTENSITY DATA
NAME:
SPEC.:
MFR.: SATCO
TYPE:S9351
DIM.:
SUR.:
WEIGHT:
SERIAL No.:
PROTECTION ANGLE:
Test:U:120.0V I:0.1899A P:22.17W PF:0.9725 Lamp Flux:2875.31x1 lm
(DEG)J
C(DEG) Table--1 UNIT: cd
00 1505 15210 15915 17020 18825 20630 22635 24440 26145 27350 28255 28760 28765 28670 28275 27780 27285 27290 27495 273100 271105 266110 260115 251120 238125 223130 205135 183140 157145 129150 101155 76.1160 50.2165 26.0170 9.11175 0.82180 0.00
2315015215817018720222024125326126727026926626125725025025125124824423722921820418816914812092.969.145.223.97.710.770.00
4515015215917419121023225126627728629229529429028728228228428428127626825824522921018916213510576.149.824.68.750.680.00
6815015215817018820321923524925826426726726425925324724824924924724223522621520218616914812192.469.747.823.98.390.840.00
9015015115816918620021723724925826526826826425925424924824924924724323722921820418716914912394.670.147.224.29.071.110.00
11315015115717119020923025026427728629229629829629328828829129128928527927025824222520317414511280.053.028.111.31.440.00
13515015115516518319921423224925926626926826526225725225025125124824423823022020719217415412910074.652.127.811.61.880.00
15815015115516617919520922924425526226626626426025624824624724824624223622821820518917215312810075.854.531.412.52.310.00
18015015115516618220021723825326727728428928828628227627327327226826325424323121619918116113610882.757.833.013.01.480.00
20315015015416417919621323124825926727127327126626125925325525525325024423622621319918116213810882.156.231.912.91.550.00
22515015115416418220122124325827528929830230330229929629229529529328928227326024522520217414311080.957.633.313.82.020.00
24815015115416317819521223024625826627027227026826225825525725725525124523622521219617815713310785.368.241.017.12.180.00
27015015115416418019621223324925926626927026826325825225025125125024624123322321019517815713310580.557.832.313.52.270.00
29315015115617018820823024926428029129730030129829328828728928928728227626725423822019917414811580.054.929.713.62.760.00
31515015115616718520121823925226226927227327026626025425325425425224824223322321019417615412899.676.959.734.313.92.310.00
33815015115717018720422123825326327027527727527226726226226426426225725024022821319717615212498.174.851.429.111.41.790.00
C Range: 0 - 360DEGC Interval: 22.5DEG
Range: 0 - 180DEG Interval: 1.0DEGJJ
Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%
Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-05-16 Remarks:
0 1020
30
40
50
60
70
80
90270
280
290
300
310
320
330340
350
ABAB
35
70
105
140
175
210
245
280
315
350
I(cd)
1000 lm K = 1
d/h
0
1
2
3
90
80
70
60
50
40
30
20100
40
30 20
10 lx
5
S(m2)10
22 3 4 5 6 7 8 910
32 3 4 5 6 7 8 910
41
2
3
4
5
6
789
10
20
30
40
50
60
708090
100
N
4
5
H=64
5
H=6
F = 5000 lmK = 0.7Hcc = 0.0 mHfc = 0.0 mEave = 100 lx
Pcc Pw Pfc70 50 3050 30 20