Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Building services range guide
Contents
VULCATHENE 4System for chemical drainagePipe, bench products & ancillariesMechanical fittings 9-11Polyfusion/mechanical adapters 11Enfusion fittings 12-14
SUPERFLO ABS 16 System for chilled & cold water Metric pipe & solvent weld fittings 18-22Metric accessories 22Metric valves & accessories 23-24
Imperial pipe 25Imperial solvent weld fittings 25-30Imperial accessories 31Imperial valves & accessories 32-34
DURAPIPE HTA 36 System for hot & cold water servicesPipe & solvent weld fittings 38-41Accessories 42-43
6-8
2 | Building services range guide
3Building services range guide |
FRIAPHON 44Sound reducing drainage systemSound attenuated pipe & fittings 46-48
PHILMAC 50 Compression fittings3G Metric/Imperial 52-55UTC 56UTC connectors guide 57Large bore PE metric 58Stopcocks & valves 59BSP threaded 60-61Accessories 61
Contact us
Tel + 44 (0) 1543 471680Email [email protected]
Web aliaxis.co.uk
Tel +44 (0) 844 335 0016Email [email protected]
Web aliaxis.co.uk/philmac
4 | Building services range guide
5Building services range guide |
Vulcathene Pipe, bench products and ancillaries
PIPE
Pipe Diameter (mm)
Standard Length (m)
Catalogue number
Product Code
38 4 W001 V41 031051 4 W001 V41 032076 4 W001 V41 0330102 4 W001 V41 0340152 4 W001 V41 0360
WASTES
Size (inch x mm x mm)
Pack qty
Catalogue number
Product Code
UNSLOTTED11/4 x 60 dia. x 89 10 504 V5 504 01111/4 x 73 dia. x 102 10 504 V5 504 03111/4 x 85 dia. x 102 10 504 V5 504 05111/2 x 60 dia. x 89 10 504 V5 504 07111/2 x 73 dia. x 102 10 504 V5 504 09111/2 x 85 dia. x 102 10 504 V5 504 111 2 x 85 dia. x 102 10 504 V5 504 131SLOTTED11/4 x 60 dia. x 89 10 504 V5 504 02111/4 x 73 dia. x 102 10 504 V5 504 04111/4 x 85 dia. x 102 10 504 V5 504 06111/2 x 60 dia. x 89 10 504 V5 504 08111/2 x 73 dia. x 102 10 504 V5 504 10111/2 x 85 dia. x 102 10 504 V5 504 121 2 x 85 dia. x 102 10 504 V5 504 141
WASTE GASKETS – For use with 601, 602 and 604 Series sinks and 605 Series troughs
Size (inch)
Pack quantity
Product Code
1½ 1 V4 000 012 1 V4 000 02
STANDING WASTE TUBES
Size (mm)
Pack quantity
Catalogue number
Product Code
32 x 140* 25 507 V5 507 01132 x 178* 25 507 V5 507 03138 x 140 25 507 V5 507 05138 x 178 25 507 V5 507 07151 x 225* 10 507 V5 507 091FITTED WITH HANGING LOOP32 x 140* 25 507 V5 507 02132 x 178* 25 507 V5 507 04138 x 140 25 507 V5 507 06138 x 178 25 507 V5 507 08151 x 225* 10 507 V5 507 101
* Made to Order (Please refer to our Terms & Conditions).
PLUG AND CHAIN ASSEMBLY
Size (mm)
Pack quantity
Catalogue number
Product Code
32 1 508 V5 508 50138 1 508 V5 508 10151 1 508 V5 508 201
OVERFLOW ASSEMBLY
Size (inch)
Pack quantity
Catalogue number
Product Code
9-22 1 509 V5 509 001
Note: The 504 waste is not included in the assembly and should be ordered separately. Size refers to length of tube.
SMALL CIRCULAR DRIP CUP
Size (mm)
Pack quantity
Catalogue number
Product Code
102 dia. 1 501 V5 501 001
LARGE CIRCULAR DRIP CUP
Size (mm)
Pack quantity
Catalogue number
Product Code
168 dia. 1 500 V5 500 001
SMALL OVAL DRIP CUP
Size (mm)
Pack quantity
Catalogue number
Product Code
175 x 102 1 497 V5 497 001
LARGE OVAL DRIP CUP
Size (mm)
Pack quantity
Catalogue number
Product Code
264 x 111 1 499B V5 499 001
LARGE OVAL DRIP CUP
Size (mm)
Pack quantity
Catalogue number
Product Code
305 x 152 1 499T V5 490 001
6 | Building services range guide
Please note: Catalogue numbers are for additional reference only, please use product code to order.
7Building services range guide |
SINKS
Size (mm)
Pack qty
Catalogue number
Product Code
492 x 241 x 171 1 601 V4 601 00
SINKS
Size (mm)
Pack qty
Catalogue number
Product Code
552 x 400 x 231 1 602 V4 602 00
RUNNING TROUGH – Fabricated (polypropylene)
Size (mm)
Pack quantity
Catalogue number
Product Code
* n/a 603 -
* Made to Order (Please refer to our Terms & Conditions).
ADJUSTABLE DILUTION RECOVERY TRAP – Anti-siphon, 2.3 litres capacity
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W681 V1 068 101
Vulcathene Pipe, bench products and ancillaries
ADJUSTABLE DILUTION RECOVERY TRAP – Anti-siphon, with visual glass base, 2.3 litres capacity
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W691 V10 691 01
ADJUSTABLE ANTI-SIPHON BOTTLE TRAP
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W561 V10 561 01
ADJUSTABLE ANTI-SIPHON BOTTLE TRAP – with visual glass base
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W571 V10 571 01
ANTI-SIPHON UNIT
Size (mm)
Pack quantity
Catalogue number
Product Code
51 1 W50 V467020
DILUTION RECOVERY TRAP – 4.5 litres capacity
Pack quantity
Catalogue number
Product Code
1 W612 V10 612 01
DILUTION RECOVERY TRAP/DEMOUNTABLE LID* – With visual glass base, 4.5 litres capacity
Pack quantity
Catalogue number
Product Code
1 W910G V10 910 001
*Inlets, glass dip tubes, blanking off plugs to be ordered separately. Note: The Vulcathene 910G Dilution Recovery Trap has been re-designed and now incorporates a removable lid for easier access and maintenance.
CLAY TRAP
Pack quantity
Catalogue number
Product Code
1 W915 V10 915 01
FLOOR GULLY* – 4.5 litre trapped floor gully, 76mm plain ended outlet, 76mm trap seal
Size (litre)
Pack quantity
Product Code
4.5** 1 V18 101 00
*Floor gullies are fabricated to order; gullies with additional inlets can also be supplied.
** Made to Order (Please refer to our Terms & Conditions).
PIPE CLIPS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 PC91 V5 091 10151 10 PC91 V5 091 20176 10 PC91 V5 091 301102 2 PC91 V5 091 401
Vulcathene Pipe, bench products and ancillaries
CLAMP SADDLES
Size (mm x BSP)
Pack quantity
Catalogue number
Product Code
102 x 2" 1 W465 V465050102 x 11/2" 1 W465 V465060 76 x 2" 1 W465 V465070 76 x 11/2" 1 W465 V465080
AIR ADMITTANCE VALVE
Size (mm)
Pack quantity
Catalogue number
Product Code
102 1 W450 V466040
UNICOLLAR FIRE PROTECTION
Size (mm)
Pack quantity
Product Code
2250 strip length 1 V468100
FLEXIBLE CONNECTORS – 38mm
Size (m)
Pack quantity
Catalogue number
Product Code
1 1 W916 V5 916 0011.5 1 W916 V5 916 0152 1 W916 V5 916 0023 1 W916 V5 916 003
GALVANISED SUPPORT CHANNELS – Supplied in standard lengths of 2.5m
Size (mm)
Pack quantity
Product Code
38 1 V4 650 1051 1 V4 650 2076 1 V4 650 30102 1 V4 650 40
VERTICAL INLETS – for 910G
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W651 V10 651 0151 1 W652 V10 652 01
HORIZONTAL INLETS – for 910G
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W641 V10 641 0151 1 W642 V10 642 01
GLASS DIP TUBES – for 910G Pack quantity
Product Code
1 V5 913 001
BLANKING OFF PLUGS – for 910G Pack quantity
Product Code
1 V5 912 001
VULCATHENE LUBRICANT
Size (g)
Pack quantity
Product Code
200 12 V5 900 002
ADDITIONAL DIP TUBE - for W612 Pack quantity
Product Code
1* V10 912 01
* Made to Order (Please refer to our Terms & Conditions).
FLEXIBLE DRAIN COUPLINGS
Size (mm)
Pack qty
Cat. number
Product Code
DC95 80-95 1 DC95 V10 0DC95DC115 100-115 1 DC115 V10 DC115
FLEXIBLE ADAPTOR COUPLINGS
Size (mm)
Pack qty
Cat. no.
Product Code
AC1221 110-122/80-95 1 AC1221 V1 AC1221AC1361 121-136/80-95 1 AC1361 V1 AC1361AC5144 110-125/100-115 1 AC5144 V1 AC5144AC1362 121-136/100-115 1 AC1362 V1 AC1362
8 | Building services range guide
9Building services range guide |
Vulcathene Mechanical fittings
921/2° SWEEP BENDS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W181 V10 181 0151 5 W182 V10 182 0176 1 W183 V10 183 01102 1 W184 V10 184 01
921/2° LOOSE NUT SWEEP BENDS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W291 V10 291 0151 10 W292 V10 292 0176 1 W293 V10 293 01102 1 W294 V10 294 01
135° SLOW BENDS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W191 V10 191 0151 5 W192 V10 192 0176 1 W193 V10 193 01102 1 W194 V10 194 01
135° LOOSE NUT SLOW BENDS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W211 V10 211 0151 5 W212 V10 212 0176 1 W213 V10 213 01102 1 W214 V10 214 01
921/2° EQUAL SWEEP TEES*
Size (mm)
Pack quantity
Catalogue number
Product Code
38 5 W201 V10 201 0151 5 W202 V10 202 0176 1 W203 V10 203 01102 1 W204 V10 204 01
*Note: Apart from the 51mm x 38mm fitting which is produced as a one piece moulding, all other reducing sweep tees are made up with a W20 ‘Series’ equal sweep tee with the addition of a W39 ‘Series’ reducing coupler which should be ordered as a separate item.
921/2° REDUCING SWEEP TEE
Size (mm)
Pack quantity
Catalogue number
Product Code
51 x 38 5 W2021 V10 202 11
45° SINGLE WYES
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W371 V10 371 0151 5 W372 V10 372 0176 1 W373 V10 373 01102 1 W374 V10 374 01
45° DOUBLE WYES
Size (mm)
Pack quantity
Catalogue number
Product Code
38 5 W381 V10 381 0151 1 W382 V10 382 0176 1 W383 V10 383 01102 1 W384 V10 384 01
LINE COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W161 V10 161 0151 10 W162 V10 162 0176 1 W163 V10 163 01102 1 W164 V10 164 01
REDUCING COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
51 x 38 10 W3921 V10 39 21176 x 38 10 W3931 V10 39 31176 x 51 10 W3932 V10 39 321102 x 38 1 W3941 V10 39 411102 x 51 1 W3942 V10 39 421102 x 76 1 W3943 V10 39 431
90° CORNER BRANCH*
Size (mm)
Pack quantity
Catalogue number
Product Code
102 x 51 1 W942 V10 942 01
*Fabricated.
TUBULAR TRAP – U-BENDS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 5 W701 V10 701 0151 1 W702 V10 702 01
Tubular traps should be assembled from stock components using a W70 ‘Series’ ‘U’ bend and additional items as indicated in technical catalogue such as P traps, S traps and running traps
Vulcathene Mechanical fittings
M.I. TO PIPE COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W141 V10 141 0151 10 W142 V10 142 01
F.I. TO PIPE COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W151 V10 151 0151 10 W152 V10 152 01
11/4” F.I. X 11/2” M.I. REDUCER
Size (mm)
Pack quantity
Catalogue number
Product Code
11/4" x 11/2" 25 W121 V10 121 01
1 3/4” X 38mm F.I TO PIPE COUPLER
Size (mm)
Pack quantity
Catalogue number
Product Code
13/4" 10 W2710 V10 271 01
GLASS ADAPTORS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W451 V10 451 0451 1 W452 V10 452 0476 1 W453 V10 453 04102 1 W454 V10 454 04
HORIZONTAL/VERTICAL THERMAL STRESS RELIEF UNITS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W801 V10 111 01
HORIZONTAL/VERTICAL THERMAL STRESS RELIEF UNITS
Size (mm)
Pack quantity
Catalogue number
Product Code
51 1 W802 V54 522 01
HORIZONTAL/VERTICAL THERMAL STRESS RELIEF UNITS
Size (mm)
Pack quantity
Catalogue number
Product Code
76 1 W803 V10 803 01 102 1 W804 V10 804 01
ACCESS PIPES
Size (mm)
Pack quantity
Catalogue number
Product Code
51 1 W902 V10 902 01 76 1 W903 V10 903 01 102 1 W904 V10 904 01
FLANGES – BS Table ‘D’ supplied undrilled
Size (mm)
Pack quantity
Catalogue number
Product Code
38* 1 W101T.D V10 101 01 51* 1 W102T.D V10 102 01 76* 1 W103T.D V10 103 01 102* 1 W104T.D V10 104 01
* Made to Order (Please refer to our Terms & Conditions).
GASKETS – BS Table ‘D’
Size (mm)
Pack quantity
Product Code
38 1 V4 501 1051 1 V4 501 2076 1 V4 501 30102 1 V4 501 40
NUTS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 50 W231 V10 231 01 51 50 W232 V10 232 01 76 25 W233 V10 233 01102 25 W234 V10 234 01
10 | Building services range guide
11Building services range guide |
Vulcathene Mechanical fittings
Vulcathene Polyfusion/mechanical adaptors
HALF COUPLERS (POLYFUSION)
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 C130 V5 130 101
BSP COUPLERS (POLYFUSION)
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 P758 V5 758 101
POLYFUSION WELDING TOOLS
Size (mm)
Pack quantity
Product Code
38 1 V4 400 10
NO HEAT OLIVES
Size (mm)
Pack quantity
Catalogue number
Product Code
38* 1 W221 V10 221 11 51* 1 W222 V10 222 1176 25 W223 V10 223 11102 25 W224 V10 224 11
CUTTING TOOLS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 W261 V10 261 0151 1 W262 V10 262 01
CUTTING TOOLS
Size (mm)
Pack quantity
Catalogue number
Product Code
76 1 W263 V10 263 01102 1 W264 V10 264 01
PIPE CUTTERS
DescriptionPack qty
Product Code
16-50mm pipe cutter 1 FT 80 00 01
50-125mm pipe cutter 1 FT 80 00 03
110-160mm pipe cutter 1 FT 80 00 09
16-63mm spare cutter wheel
1 FT 80 00 02
50-125mm spare cutter wheel
1 FT 80 00 04
BLANKING OFF PLUGS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W241 V10 241 0151 10 W242 V10 242 0176 1 W243 V10 243 01102 1 W244 V10 244 01
SPANNERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 W361 V10 361 0151 5 W362 V10 362 0176 5 W363 V10 363 01102 5 W364 V10 364 01
Vulcathene Enfusion fittings
SINGLE SOCKETS - Long sweep bend
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L281 V60 281 0151 10 L282 V60 282 0176 1 L283 V60 283 01102 1 L284 V60 284 01152 1 L286 V60 286 01
DOUBLE SOCKETS - Long sweep bend
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L171 V60 171 0151 10 L172 V60 172 0176 1 L173 V60 173 01102 1 L174 V60 174 01152 1 L176 V60 176 01
DOUBLE SOCKETS - 45° slow bend
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L191 V60 191 0151 10 L192 V60 192 0176 1 L193 V60 193 01102 1 L194 V60 194 01152 1 L196 V60 196 01
SINGLE SOCKETS - Short sweep bend
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L291 V60 291 0151 10 L292 V60 292 01
DOUBLE SOCKETS - Short sweep bend
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L181 V60 181 0151 10 L182 V60 182 01
LOOSE NUT/SOCKETS - Short sweep bend
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L291A V60 291 11
SINGLE SOCKETS - 45° slow bend L211/L212/L213/L214/L216
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L211 V60 211 0151 10 L212 V60 212 0176 1 L213 V60 213 01102 1 L214 V60 214 01152 1 L216 V60 216 01
45° SINGLE WYES
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L371 V60 371 0151 1 L372 V60 372 0176 1 L373 V60 373 01102 1 L374 V60 374 01152 1 L376 V60 376 01
45° REDUCING WYES
Size (mm)
Pack quantity
Catalogue number
Product Code
51 x 38 1 L3721 V60 372 1176 x 38 1 L3731 V60 373 1176 x 51 1 L3732 V60 373 21102 x 51 1 L3742 V60 374 21102 x 76 1 L3743 V60 374 31152 x 51 1 L3762 V60 376 21152 x 76 1 L3763 V60 376 31152 x 102 1 L3764 V60 376 41
921/2° EQUAL SWEEP TEES
Size (mm)
Pack quantity
Catalogue number
Product Code
38 5 L201 V60 201 0151 5 L202 V60 202 0176 1 L203 V60 203 01102 1 L204 V60 204 01
921/2° REDUCING SWEEP TEES*
Size (mm)
Pack quantity
Catalogue number
Product Code
51 x 38 5 L2021 V60 202 1176 x 38 1 L2031 V60 203 1176 x 51 1 L2032 V60 203 21102 x 51 1 L2042 V60 204 21
*To make 102x76mm reducing tee use L204 equal tee with L3934 reducer.
12 | Building services range guide
13Building services range guide |
Vulcathene Enfusion fittings
LINE COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L161 V60 161 0151 10 L162 V60 162 0176 1 L163 V60 163 01102 1 L164 V60 164 01152 1 L166 V60 166 01
GLASS ADAPTORS
Size (mm)
Pack quantity
Catalogue number
Product Code
38* 1 L451 V60 451 0451* 1 L452 V60 452 0476* 1 L453 V60 453 04102* 1 L454 V60 454 04
* Made to Order (Please refer to our Terms & Conditions).
REDUCING COUPLERS*
Size (mm)
Pack quantity
Catalogue number
Product Code
51 x 38 25 L3912 V60 391 2176 x 51 10 L3923 V60 392 31102 x 51 5 L3924 V60 392 41102 x 76 1 L3934 V60 393 41152 x 102 1 L3946 V60 394 61
* 76mm x 38mm reducer: Use L3923 reducer + L3912 reducer
102mm x 38mm reducer: Use L3924 reducer + L3912 reducer
152mm x 38mm reducer: Use L3946 reducer + L3924 reducer + L3912 reducer
152mm x 51mm reducer: Use L3946 reducer + L3924 reducer
152mm x 76mm reducer: Use L3946 reducer + L3934 reducer
921/2° DOUBLE BRANCHES
Size (mm)
Pack quantity
Catalogue number
Product Code
51 1 L352 V60 352 0176 1 L353 V60 353 01102 1 L354 V60 354 01
U-BENDS
Size (mm)
Pack quantity
Catalogue number
Product Code
38* 1 L1011 V60 101 1151* 1 L1012 V60 101 21
*P traps in 38mm & 51mm sizes can be made by adding 1 x L28 series single socket bend to the U bend; P traps in 76mm, 102mm & 152mm sizes can be made using 2 x L28 series single socket bends plus 1 x L17 series double socket.
SLIP COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
102 1 L164(S) V67 164 01152 1 L166(S) V64 166 01
M.I. TO PIPE COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L141 V60 141 0151 10 L142 V60 142 01
F.I. TO PIPE COUPLERS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 10 L151 V60 151 01 51 10 L152 V60 152 01
HORIZONTAL/VERTICAL THERMAL STRESS RELIEF UNITS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 L801 V60 801 01
HORIZONTAL/VERTICAL THERMAL STRESS RELIEF UNITS
Size (mm)
Pack quantity
Catalogue number
Product Code
51 1 L802 V60 802 01
HORIZONTAL/VERTICAL THERMAL STRESS RELIEF UNITS
Size (mm)
Pack quantity
Catalogue number
Product Code
76 1 L803 V10 803 01102 1 L804 V10 804 01152 1 L806 V60 806 01
*Now supplied spigot ended.
Vulcathene Enfusion fittings
FLANGES
Size (mm)
Pack quantity
Catalogue number
Product Code
UNDRILLED38 1 L361 V60 401 0151 1 L362 V60 402 0176 1 L363 V60 403 01102 1 L364 V60 404 01152 1 L366 V60 406 01
CLAMPS
Size (mm)
Pack quantity
Catalogue number
Product Code
38 1 L261 V62 610 1451 1 L262 V62 610 2476 1 L263 V62 610 34 102 1 L264 V62 610 44 152 1 L265 V62 610 64
PIPE SCRAPER
Size (mm)
Pack quantity
Product Code
Pipe scraper - C53MJ001
Replacement bades
2 per pack C53MJ002
CLEANOUT PLUGS*
Size (mm)
Pack quantity
Catalogue number
Product Code
38 5 L241 V60 241 0151 5 L242 V60 242 0176 1 L243 V60 243 01102 1 L244 V60 244 01
*Note: for 152mm cleanout use L3946 reducer with L244 cleanout plug.
ENFUSION ‘HAND HELD’ ELECTROFUSION UNIT
Pack quantity
Catalogue number
Product Code
1 L2601 V6ECU001
LINK CABLE
Pack quantity
Catalogue number
Product Code
1 L2610 C53EN003
TERMINAL PIN ADAPTORPack quantity
Product Code
10 C3370890
*Terminal pin adaptors allow easier access to fitting terminal pins where access is restricted.
A full range of Vultex Labline Service Controls & Spares, are available via Arboles UK. Contact thier Customer Service Team for further information on +44 (0) 1204 388814
14 | Building services range guide
of Vulcathene with our e-learning platform!
Enhance your knowledge
To register for free please visit: aliaxisacademy.co.uk/registration
SuperFlo ABS
16 | Building services range guide
17Building services range guide |
SuperFlo ABS Metric pipe & solvent weld fittings
METRIC PIPE SYSTEM – Plain PN10
Diameter (mm)
Standard length in metres
Product Code
16 5 11 555 30520 5 11 555 30625 5 11 555 30732 5 11 555 30840 5 11 555 30950 5 11 555 31063 5 11 555 31175 5 11 555 31290 5 11 555 313110 5 11 555 314125 5 11 555 315140 5 11 555 316160 5 11 555 317200 5 11 555 318225 5 11 555 319250 5 11 555 320315** 5 11 555 32320* 6 11 551 30625 6 11 551 30732 6 11 551 30840 6 11 551 30950 6 11 551 31063 6 11 551 31175 6 11 551 31290 6 11 551 313110 6 11 551 314125* 6 11 551 315140* 6 11 551 316160* 6 11 551 317200* 6 11 551 318225* 6 11 551 319250* 6 11 551 320315* ** 6 11 551 323
* Made to Order (Please refer to our Terms & Conditions).** 315mm is PN8 rated.
REDUCING BUSHES
Size (mm)
Standard pack quantity
Product Code
20 x 16 10 11 109 41225 x 20 10 11 109 41532 x 16 10 111 09 41732 x 25 10 11 109 41940 x 32 10 11 109 42350 x 20 10 11 109 42450 x 25 10 11 109 42550 x 32 10 11 109 42650 x 40 10 11 109 42763 x 25 10 11 109 42963 x 32 10 11 109 43063 x 50 10 11 109 43275 x 63 5 11 109 43890 x 50 5 11 109 44290 x 63 5 11 109 44390 x 75 5 11 109 444110 x 63 1 11 109 449110 x 90 1 11 109 451125 x 110 1 11 109 459140 x 125 1 11 109 467160 x 90 1 11 109 473160 x 110 1 11 109 474160 x 140 1 11 109 476200 x 160 1 11 109 487225 x 160 1 11 109 495225 x 200 1 11 109 496250 x 225 1 11 109 499315 x 250 1 11 109 503
REDUCERS – Plain/Spigot x plain
Size (mm)
Standard pack quantity
Product Code
(25 or 20) x 16 10 11 114 412(32 or 25) x 20 10 11 114 415(40 or 32) x 25 10 11 114 419(50 or 40) x 32 10 11 114 423(63 or 50) x 40 5 11 114 427(75 or 63) x 50 5 11 114 432(90 or 75) x 63 1 11 114 438(110 or 90) x 75 1 11 114 444(125 or 110) x 90 1 11 114 451(140 or 125) x 110 1 11 114 459(160 or 140) x 125 1 11 114 467(200 or 160) x 140 1 11 114 476(225 or 200) x 160 1 11 114 487
TEES 45° – Plain
Size (mm)
Standard pack quantity
Product Code
20 5 11 418 30625 5 11 418 30732 5 11 418 30840 5 11 418 30950 5 11 418 31063 1 11 418 311
SOCKETS
Size (mm)
Standard pack quantity
Product Code
16 10 11 100 30520 10 11 100 30625 10 11 100 30732 10 11 100 30840 10 11 100 30950 10 11 100 31063 5 11 100 31175 1 11 100 31290 1 11 100 313110 1 11 100 314125 1 11 100 315140 1 11 100 316160 1 11 100 317200 1 11 100 318225 1 11 100 319250 1 11 100 320315 1 11 100 323
18 | Building services range guide
19Building services range guide |
SuperFlo ABS Metric solvent weld fittings
ELBOWS 45°
Size (mm)
Standard pack quantity
Product Code
16 10 11 119 30520 10 11 119 30625 10 11 119 30732 10 11 119 30840 10 11 119 30950 10 11 119 31063 5 11 119 31175 1 11 119 31290 1 11 119 313110 1 11 119 314125 1 11 119 315140 1 11 119 316160 1 11 119 317200 1 11 119 318225 1 11 119 319250 1 11 119 320315 1 11 119 323
TEES 90° – Equal
Size (mm)
Standard pack quantity
Product Code
16 10 11 122 30520 10 11 122 30625 10 11 122 30732 10 11 122 30840 10 11 122 30950 5 11 122 31063 5 11 122 31175 1 11 122 31290 1 11 122 313110 1 11 122 314125 1 11 122 315140 1 11 122 316160 1 11 122 317200 1 11 122 318225 1 11 122 319250 1 11 122 320315 1 11 122 323
TEES 90° – Reducing
Size (mm)
Standard pack quantity
Product Code
25 x 20 10 11 124 41532 x 20 10 11 124 41832 x 25 10 11 124 41940 x 20 10 11 124 42140 x 25 10 11 124 42250 x 20 5 11 124 42450 x 25 5 11 124 42550 x 32 5 11 124 42663 x 25 5 11 124 42963 x 32 5 11 124 43075 x 32 1 11 124 43575 x 40 1 11 124 43675 x 50 1 11 124 43775 x 63 1 11 124 43890 x 40 1 11 124 44190 x 50 1 11 124 44290 x 63 1 11 124 443110 x 63 1 11 124 449110 x 75 1 11 124 450
TEES 90° – Swept
Size (mm)
Standard pack quantity
Product Code
32 10 11 148 30850 10 11 148 31063 5 11 148 31175 1 01 148 108110 1 11 148 314
ELBOWS 90°
Size (mm)
Standard pack quantity
Product Code
16 10 11 115 30520 10 11 115 30625 10 11 115 30732 10 11 115 30840 10 11 115 30950 10 11 115 31063 5 11 115 31175 1 11 115 31290 1 11 115 313110 1 11 115 314125 1 11 115 315140 1 11 115 316160 1 11 115 317200 1 11 115 318225 1 11 115 319250 1 11 115 320315 1 11 115 323
BENDS 90°
Size (mm)
Standard pack quantity
Product Code
20 10 11 118 30625 10 11 118 30732 10 11 118 30840 5 11 118 30950 1 11 118 31063 1 11 118 31175 1 11 118 31290 1 11 118 313110 1 11 118 314
SuperFlo ABS Metric solvent weld fittings
FABRICATED BENDS 90° – Plain
Size (mm)
Standard pack quantity
Product Code
75* 1 11 309 312125* 1 11 309 315140* 1 11 309 316160* 1 11 309 317200* 1 11 309 318225* 1 11 309 319
* Made to Order (Please refer to our Terms & Conditions).
Note: Special angled bends can be supplied to order: Angles between 0° and 90° - POA.
CAPS – Plain
Size (mm)
Standard pack quantity
Product Code
16 10 11 149 30520 10 11 149 30625 10 11 149 30732 10 11 149 30840 10 11 149 30950 10 11 149 31063 5 11 149 31175 5 11 149 31290 5 11 149 313110 1 11 149 314
SOCKET UNIONS
Size (mm)
Standard pack quantity
Product Code
16 10 11 205 30520 10 11 205 30625 10 11 205 30732 10 11 205 30840 5 11 205 30950 5 11 205 31063 5 11 205 31175 5 11 205 31290 1 11 205 313110 1 11 205 314
EPDM seal as standard.
IMPERIAL/METRIC SOCKET ADAPTORS – Plain
Size (mm)
Standard pack quantity
Product Code
1/2 x 20 10 11 345 1023/4 x 25 10 11 345 1031 x 32 10 11 345 10411/4 x 40 10 11 345 10511/2 x 50 10 11 345 1062 x 63 5 11 345 10721/2 x 75 1 11 100 3123 x 90 1 11 345 1094 x 110 1 11 345 1106 x 160 1 11 345 112
MALE THREADED ADAPTORS – BSP taper male thread
Size (mm)
Standard pack quantity
Product Code
16 x 12 x 3/8" 10 11 151 33120 x 16 x 3/8" 10 11 151 33220 x 16 x 1/2" 10 11 151 33320 x 16 x 3/4" 10 11 151 32725 x 20 x 1/2" 10 11 151 33425 x 20 x 3/4" 10 11 151 33532 x 25 x 1/2" 10 11 151 35232 x 25 x 3/4" 10 11 151 33632 x 25 x 1" 10 11 151 33740 x 32 x 1" 10 11 151 33840 x 32 x 11/4" 10 11 151 33950 x 40 x 11/4" 5 11 151 34050 x 40 x 11/2" 5 11 151 34163 x 50 x 11/2" 5 11 151 34263 x 50 x 2" 5 11 151 34375 x 63 x 2" 5 11 151 345
FEMALE THREADED ADAPTORS – BSP taper female threaded reinforced
Size (mm)
Standard pack quantity
Product Code
16 x 12 x 3/8" 10 11 153 33120 x 16 x 1/2" 10 11 153 33325 x 20 x 3/4" 10 11 153 33532 x 25 x 1" 10 11 153 33740 x 32 x 11/4" 5 11 153 33950 x 40 x 11/2" 5 11 153 34163 x 50 x 2" 5 11 153 343
HOSE ADAPTORS – Spigot end
Size (mm)
Standard pack quantity
Product Code
16 10 11 158 30520 10 11 158 30625 10 11 158 30732 10 11 158 308
FEMALE COMPOSITE UNIONS – ABS/Brass, BSP parallel female
Size (mm)
Standard pack quantity
Product Code
16 x 3/8" 10 11 216 30520 x 1/2" 10 11 222 30625 x 3/4" 10 11 222 30732 x 1" 10 11 222 30840 x 11/4" 5 11 222 30950 x 11/2" 5 11 222 31063 x 2" 5 11 222 311
20 | Building services range guide
21Building services range guide |
SuperFlo ABS Metric solvent weld fittings
MALE COMPOSITE UNIONS – ABS/Brass, BSP taper male thread
Size (mm)
Standard pack quantity
Product Code
16 x 3/8” 10 11 217 30520 x 1/2” 10 11 223 30625 x 3/4” 10 11 223 30732 x 1" 10 11 223 30840 x 11/4” 5 11 223 30950 x 11/2” 5 11 223 31063 x 2" 5 11 223 311
SS FEMALE COMPOSITE UNIONS – ABS/Stainless Steel 316L, BSP parallel female
Size (mm)
Standard pack quantity
Product Code
20 x 1/2" 10 11 218 30625 x 3/4" 10 11 218 30732 x 1" 10 11 218 30840 x 11/4" 5 11 218 30950 x 11/2" 5 11 218 31063 x 2" 5 11 218 311
SS MALE COMPOSITE UNIONS – ABS/Stainless Steel 316L, BSP taper male
Size (mm)
Standard pack quantity
Product Code
20 x 1/2" 10 11 219 30625 x 3/4" 10 11 219 30732 x 1" 10 11 219 30840 x 11/4" 5 11 219 30950 x 11/2" 5 11 219 31063 x 2" 5 11 219 311
ABS FLEXIBLE BRAIDED HOSES* – Plain spigot x BSP
Size (mm)
Standard pack quantity
Product Code
20 1/2” x 300mm 1 11 450 306
25 3/4” x 300mm 1 11 450 307
32 1” x 300mm 1 11 450 308
20 1/2” x 600mm 1 11 451 306
25 3/4” x 600mm 1 11 451 307
32 1” x 600mm 1 11 451 308
* Made to Order (Please refer to our Terms & Conditions).
STUB FLANGES – Serrated face
Size (mm)
Standard pack quantity
Product Code
16 10 11 135 30520 10 11 135 30625 10 11 135 30732 10 11 135 30840 10 11 135 30950 5 11 135 31063 5 11 135 31175 5 11 135 31290 1 11 135 313110 1 11 135 314125 1 11 135 315140 1 11 135 316160 1 11 135 317200* 1 11 135 318225 1 11 135 319250 1 11 135 320315 1 11 135 323
*The 200mm (NW175) stub flange supplied by Durapipe when used in conjunction with backing ring Code number 421 318 and 420 318 has a bolt circle diameter which matches 225mm (NW200) valves and fittings (295mm).
BLANK FLANGES
Size (mm)
Standard pack quantity
Product Code
Drilled to EN1029 PN16 (formerly BS4504)32 5 11 323 30840 5 11 323 30950 5 11 323 31063 5 11 323 31175 5 11 323 31290 1 11 323 313110 1 11 323 314125 1 11 323 315140 1 11 323 316160 1 11 323 317
Note: Durapipe backing rings must be used in conjunction with blank flanges.
SuperFlo ABS Metric solvent weld fittings & accessories
BACKING RINGS – Galvanised mild steelSize (mm)
Standard pack quantity
Product Code
Drilled to EN1029 PN10/PN16 (formerly BS4504)16 1 13 421 30520 1 13 421 30625 1 13 421 30732 1 13 421 30840 1 13 421 30950 1 13 421 31063 1 13 421 31175 1 13 421 31290 1 13 421 313110 1 13 421 314125 1 13 421 315140 1 13 421 316160 1 13 421 317Drilled to EN1029 PN10 (formerly BS4504)200 1 13 421 318225 1 13 421 319250 1 13 421 320315 1 13 421 323Drilled to EN1029 PN16 (formerly BS4504)200 1 13 420 318225 1 13 420 319250 1 13 420 320315 1 13 420 323Drilled to ANSI CLASS 15020 1 13 448 30625 1 13 448 30732 1 13 448 30840 1 13 448 30950 1 13 448 31063 1 13 448 31175 1 13 448 31290 1 13 448 313110 1 13 448 314
*The 200mm (NW175) stub flange supplied by Durapipe when used in conjunction with backing ring; Code number 421 318 and 420 318 has a bolt circle diameter which matches 225mm (NW200) valves and fittings (295mm).
FLAT GASKETS/STUB FLANGES
Size (mm)
Standard pack quantity
Product Code
16 1 13 411 30520 1 13 411 30625 1 13 411 30732 1 13 411 30840 1 13 411 30950 1 13 411 31063 1 13 411 31175 1 13 411 31290 1 13 411 313110 1 13 411 314125 1 13 411 315140 1 13 411 316160 1 13 411 317200 1 13 411 318225 1 13 411 319250 1 13 431 320315 1 13 411 323
VALVE SUPPORT PLATES GALVANISED MILD STEEL
Size (mm)
Standard pack quantity
Product Code
16 1 31 459 30520 1 31 459 30625 1 31 459 30732 1 31 459 30850 1 31 459 31063 1 31 459 31175 1 31 459 31290 1 31 459 313110 1 31 459 314
SOCKET UNION NUT
Size (mm)
Standard pack quantity
Product Code
16 10 11 208 30520 10 11 208 30625 10 11 208 30732 10 11 208 30840 5 11 208 30950 5 11 208 31063 5 11 208 311
SOCKET END PLAIN
Size (mm)
Standard pack quantity
Product Code
20 10 92 878 30625 10 92 878 30732 10 92 878 30840 5 92 878 30950 5 92 878 31063 5 92 878 311
SOCKET UNION THREADED ADAPTOR
Size (mm)
Standard pack quantity
Product Code
25 10 11 207 30732 10 11 207 30840 5 11 207 30950 5 11 207 31063 5 11 207 311
SOCKET UNION PLAIN ADAPTOR
Size (mm)
Standard pack quantity
Product Code
16 10 11 206 30520 10 11 206 30625 10 11 206 30732 10 11 206 30840 5 11 206 30950 5 11 206 31063 5 11 206 311
22 | Building services range guide
23Building services range guide |
SuperFlo ABS Metric valves & accessories
VKD DOUBLE UNION BALL VALVES MANUAL - EPDM seals
Size (mm)
Standard pack quantity
Product Code
16 1 H0 DKA 30520 1 H0 DKA 30625 1 H0 DKA 30732 1 H0 DKA 30840 1 H0 DKA 30950 1 H0 DKA 31063 1 H0 DKA 311
Note: FKM seals available on request
LOCKABLE VKD DOUBLE UNION BALL VALVE MANUAL - EPDM seals
Size (mm)
Standard pack quantity
Product Code
16 1 H0 DLA 30520 1 H0 DLA 30625 1 H0 DLA 30732 1 H0 DLA 30840 1 H0 DLA 30950 1 H0 DLA 31063 1 H0 DLA 311
Note: FKM seals available on request
VKD DOUBLE UNION BALL VALVES MANUAL - EPDM seals
Size (mm)
Standard pack quantity
Product Code
75 1 H0 DKA 31290 1 H0 DKA 313110 1 H0 DKA 314
Note: VKD ball valves are available with flanged ends (ISO-DIN) on request. Please order via Code H0 DKA F**
VXE EASYFIT DOUBLE UNION BALL VALVES MANUAL - EPDM seals
Size (mm)
Standard pack quantity
Product Code
20 1 H0 XEA 30625 1 H0 XEA 30732 1 H0 XEA 30840 1 H0 XEA 30950 1 H0 XEA 31063 1 H0 XEA 311
Note: FKM seals available on request.
VKR METERING BALL VALVES PLAIN FEMALE ENDS - EPDM seals
Size (mm)
Standard pack quantity
Product Code
16 1 H0 MBA 30520 1 H0 MBA 30625 1 H0 MBA 30732 1 H0 MBA 30840 1 H0 MBA 30950 1 H0 MBA 31063 1 H0 MBA 311
SET OF TRANSPARENT SERVICE PLUGS AND WHITE PVC TAG HOLDERS – For insertion in handle for VXE Easyfit valve customisation
Size (mm)
Standard pack quantity
Product Code
16-20 / 1/2 20 LCE02025/3/4 20 LCE02532 / 1 20 LCE03240 / 11/4 20 LCE04050 / 11/2 20 LCE05063 / 2 20 LCE063
Note: FKM seals available on request
TKD 3-WAY BALL VALVES T-PORT PLAIN FEMALE ENDS - EPDM seals
Size (mm)
Standard pack quantity
Product Code
20 1 H0 TTA 30625 1 H0 TTA 30732 1 H0 TTA 30840 1 H0 TTA 30950 1 H0 TTA 31063 1 H0 TTA 311
TKD 3-WAY BALL VALVES T-PORT PLAIN FEMALE ENDS - EPDM seals
Size (mm)
Standard pack quantity
Product Code
20 1 H0 LTA 30625 1 H0 LTA 30732 1 H0 LTA 30840 1 H0 LTA 30950 1 H0 LTA 31063 1 H0 LTA 311
Lockable Handle Option available upon request: Please order Code reference ‘TLA’
DIE CUT LABELS PLUS SOFTWARE – White waterproof A4 sheets and freeware editing software to be used with inkjet printers for VXE Easyfit valve customisation
Size (mm/inch)
No. of sheets
Total labels
Product Code
16-20 / 1/2 10 500 LSE02025/3/4 10 500 LSE02532 / 1 10 500 LSE03240 / 11/4 10 500 LSE04050 / 11/2 10 400 LSE05063 / 2 10 400 LSE063
SuperFlo ABS Metric valves & accessories
LR PRESSURE LOADING/RELIEF VALVES – Plain Union Ends - EPDM Seals
Size (mm)
Standard pack quantity
Product Code
16 1 H0 LRA 30520 1 H0 LRA 30625 1 H0 LRA 30732 1 H0 LRA 30840 1 H0 LRA 30950 1 H0 LRA 31063 1 H0 LRA 311
FKM or PTFE seal options available upon request.
FK BUTTERFLY VALVES – with gear box
Size (mm)
Standard pack quantity
Product Code
75 1 HV FKA 10890 1 HV FKA 109110 1 HV FKA 110140 1 HV FKA 111160 1 HV FKA 112225 1 HV FKA 113250 1 HV FKA 114315 1 HV FKA 115
FK BUTTERFLY VALVES – Glass reinforced Polypropylene with ABS disc, EPDM liner. Lever operated
Size (mm)
Standard pack quantity
Product Code
50 1 H0 FKA 10663 1 H0 FKA 10775 1 H0 FKA 10890 1 H0 FKA 109110 1 H0 FKA 110140 1 H0 FKA 111160 1 H0 FKA 112225 1 H0 FKA 113
RUBBER LINED PIPE CLIPS
Size (mm) Thread
Standard pack quantity
Product Code
16 M10 50 FT PC 160020 M10 50 FT PC 200025 M10 50 FT PC 250032 M10 50 FT PC 320040 M10 50 FT PC 400050 M10 50 FT PC 500063 M10 50 FT PC 630075 M10 50 FT PC 750090 M10 50 FT PC 9000110 M10 50 FT PC 1100160 M10 50 FT PC 1601
SX EASYFIT BALL CHECK VALVES PLAIN FEMALE ENDS - EPDM seals
Size (mm)
Standard pack quantity
Product Code
20 1 H0 SXA 30625 1 H0 SXA 30732 1 H0 SXA 30840 1 H0 SXA 30950 1 H0 SXA 31063 1 H0 SXA 311
SX ball check valve is also available with FKM seals.
SX EASYFIT AIR RELEASE VALVES PLAIN FEMALE ENDS - EPDM seals
Size (mm)
Standard pack quantity
Product Code
20 1 H0 SAA 30625 1 H0 SAA 30732 1 H0 SAA 30840 1 H0 SAA 30950 1 H0 SAA 31063 1 H0 SAA 311
Note: FKM seals available on request
UV Y-TYPE STRAINERS – Plain ends - EPDM seals
Size (mm)
Standard pack quantity
Product Code
20 1 H0 UVA 30625 1 H0 UVA 30732 1 H0 UVA 30840 1 H0 UVA 30950 1 H0 UVA 31063 1 H0 UVA 311
DIALOCK® DIAPHRAGM VALVES MANUAL - plain female ends - EPDM
Size (mm)
Standard pack quantity
Product Code
20 1 H0 DVA 30625 1 H0 DVA 30732 1 H0 DVA 30840 1 H0 DVA 30950 1 H0 DVA 31063 1 H0 DVA 311
FKM or PTFE seal options available upon request.
Note: Larger sizes available upon request. (Minimum order quantity will apply)
24 | Building services range guide
Note: FKM seals available on request
Note: FKM Liner available on request
Note: FKM Liner available on request
SuperFlo ABS Imperial pipe & solvent weld fittings
PIPE - ABS Class C (9 bar)
Pipe diameter (inch)
Standard length in metres
Product Code
1 6 01 511 10411/4 6 01 511 10511/2 6 01 511 1062 6 01 511 10721/2 6 11 551 3123 6 01 511 1094 6 01 511 1105 6 11 551 3166 6 01 511 1128 6 01 511 113
Note: 21/2” and 5” pipes are 10 bar rated.
PIPE - ABS Class E (15 bar)
Pipe diameter (inch)
Standard length in metres
Product Code
1/2 6 01 513 1023/4 6 01 513 1031 6 01 513 10411/4 6 01 513 10511/2 6 01 513 1062 6 01 513 1073 6 01 513 1094 6 01 513 110
PIPE - ABS Class T for threading (12 bar after threading)
Size (inch)
Standard pack quantity
Product Code
1/2 6 01 514 1023/4 6 01 514 1031 6 01 514 10411/4 6 01 514 10511/2 6 01 514 1062 6 01 514 107
PIPE - ABS Class D (12 bar)
Pipe diameter (inch)
Standard length in metres
Product Code
6 6 01 512 112
25Building services range guide |
SOCKETS PLAIN
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 100 1023/4 10 01 100 1031 10 01 100 10411/4 10 01 100 10511/2 10 01 100 1062 5 01 100 10721/2 1 11 100 3123 1 01 100 1094 1 01 100 1105 1 11 100 3166 1 01 100 1128 1 01 100 113
REDUCING BUSHES – Plain
Size (inch)
Standard pack quantity
Product Code
3/4 x 1/2 10 01 109 1221 x 1/2 10 01 109 1231 x 3/4 10 01 109 12411/4 x 1/2 10 01 109 11611/4 x 3/4 10 01 109 11711/4 x 1 10 01 109 12511/2 x 1/2 10 01 109 11811/2 x 3/4 10 01 109 11911/2 x 1 10 01 109 12611/2 x 11/4 10 01 109 1272 x 3/4 10 01 109 1202 x 1 10 01 109 1282 x 11/4 10 01 109 1292 x 11/2 10 01 109 13021/2 x 2 5 01 109 1313 x 11/2 5 01 109 1343 x 2 5 01 109 1353 x 21/2 5 01 109 1364 x 3 1 01 109 1415 x 4 1 01 329 1426 x 4 1 01 109 1476 x 5 1 01 329 1488 x 6 1 01 109 152
REDUCING SOCKETS – Plain
Size (inch)
Standard pack quantity
Product Code
3/4 x 1/2 10 01 114 1221 x 3/4 10 01 114 12411/4 x 1 10 01 114 12511/2 x 11/4 10 01 114 1272 x 11/2 5 01 114 1303 x 2 1 01 114 1354 x 3 1 01 114 1416 x 4 1 01 114 1478 x 6 1 01 114 152
SuperFlo ABS Imperial solvent weld fittings
ELBOWS 45° – Plain
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 119 1023/4 10 01 119 1031 10 01 119 1041 1/4 10 01 119 1051 1/2 10 01 119 1062 5 01 119 1072 1/2 1 11 119 3123 1 01 119 1094 1 01 119 1105 1 11 119 3166 1 01 119 1128 1 01 119 113
TEES 45° – Plain
Size (inch)
Standard pack quantity
Product Code
1/2 5 01 128 1023/4 5 01 128 1031 5 01 128 1041 1/4 5 01 128 1051 1/2 5 01 128 1062 1 01 128 107
ELBOWS 90° – Plain
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 115 1023/4 10 01 115 1031 10 01 115 1041 1/4 10 01 115 1051 1/2 10 01 115 1062 5 01 115 1072 1/2 1 11 115 3123 1 01 115 1094 1 01 115 1105 1 11 115 3166 1 01 115 1128 1 01 115 113
TEES 90° – Plain
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 122 1023/4 10 01 122 1031 10 01 122 1041 1/4 10 01 122 1051 1/2 5 01 122 1062 5 01 122 1072 1/2 1 11 122 3123 1 01 122 1094 1 01 122 1105 1 11 122 3166 1 01 122 1128 1 01 122 113
TEES 90° SWEPT - Plain
Size (inch)
Standard pack quantity
Product Code
1 10 01 148 1041 1/2 5 01 148 1062 5 01 148 1072 1/2 1 01 148 1084 1 01 148 110
BENDS 221/2° – Long radius
Size (inch)
Standard pack quantity
Product Code
1* 1 01 311 1041 1/2 * 1 01 311 1062* 1 01 311 1072 1/2 * 1 11 311 3123* 1 01 311 1094* 1 01 311 1105* 1 11 311 3166* 1 01 311 1128* 1 01 311 113
* Made to Order (Please refer to our Terms & Conditions).
Note: Special angled bends can be supplied by order: Angles between 0° and 90° - POA.
BENDS 45° – Long radius
Size (inch)
Standard pack quantity
Product Code
1* 1 01 310 1041 1/2 * 1 01 310 1062* 1 01 310 1072 1/2 * 1 11 310 3123* 1 01 310 1094* 1 01 310 1105* 1 11 310 3166* 1 01 310 1128* 1 01 310 113
TEES 90° - Reducing
Size (inch)
Standard pack quantity
Product Code
3/4 x 1/2 5 01 124 1221 x 1/2 5 01 124 1231 x 3/4 5 01 124 124
26 | Building services range guide
SuperFlo ABS Imperial solvent weld fittings
BENDS 90° – Long radius
Size (inch)
Standard pack quantity
Product Code
3 1 01 309 1094 1 01 309 1105 1 11 309 3166 1 01 309 1128 1 01 309 113
BENDS 90° – Short radius
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 118 1031 10 01 118 10411/4 5 01 118 10511/2 1 01 118 1062 1 01 118 10721/2 1 11 118 3123 1 01 118 1094 1 01 118 110
END CAPS - Plain
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 140 1023/4 10 01 140 1031 10 01 140 10411/4 10 01 140 10511/2 10 01 140 1062 5 01 140 10721/2 5 11 149 3123 5 01 140 1094 1 01 140 110
SADDLES - Plain
Size (inch)
Standard pack quantity
Product Code
2 x 11/4 10 01 126 1293 x 11/2 1 01 126 1344 x 2 1 01 126 1406 x 2 1 01 126 146
27Building services range guide |
SOCKET UNIONS – Plain EPDM
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 205 1023/4 10 01 205 1031 10 01 205 10411/4 5 01 205 10511/2 5 01 205 1062 5 01 205 10721/2 5 11 205 3123 1 01 205 1094 1 01 205 110
IMPERIAL/METRIC SOCKET ADAPTORS – Plain
Size (inch)
Standard pack quantity
Product Code
1/2 x 20 10 11 345 1023/4 x 25 10 11 345 1031 x 32 10 11 345 10411/4 x 40 10 11 345 10511/2 x 50 10 11 345 1062 x 63 5 11 345 10721/2 x 75 1 11 100 3123 x 90 1 11 345 1094 x 110 1 11 345 1106 x 160 1 11 345 112
SOCKET UNIONS – Plain FKM
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 204 1033/4 10 01 204 1041 5 01 204 10511/4 5 01 204 10611/2 5 01 204 1072 5 11 204 31221/2 1 01 204 1093* 1 01 204 1104* 1 01 205 110
3” and 4” are class C rated. 21/2” is PN10 rated. EPDM seal as standard
SOCKETS – Plain/female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 101 1023/4 10 01 101 1031 10 01 101 10411/4 10 01 101 10511/2 10 01 101 1062 5 01 101 1073 1 01 101 109
SuperFlo ABS Imperial solvent weld fittings
MALE THREADED ADAPTORS – Plain/female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 151 1023/4 10 01 151 1031 10 01 151 10411/4 10 01 151 10511/2 5 01 151 1062 5 01 151 107
HEXAGON NIPPLES – Plain spigot/male BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 107 1023/4 10 01 107 1031 10 01 107 10411/4 10 01 107 10511/2 5 01 107 1062 5 01 107 107
ELBOWS 90° – Plain/female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 116 1023/4 10 01 116 1031 10 01 116 10411/2 5 01 116 1062 5 01 116 107
REDUCING BUSHES – Plain/female BSP thread
Size (inch)
Standard pack quantity
Product Code
3/4 x 1/2 10 01 111 1211 x 1/2 10 01 111 1221 x 3/4 10 01 111 124
FEMALE THREADED ADAPTORS - Plain spigot end/female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 153 1023/4 10 01 153 1031 10 01 153 10411/4 10 01 153 10511/2 5 01 153 1062 5 01 153 107
BARREL NIPPLES – Plain spigot/male BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 1 01 316 1023/4 1 01 316 1031 1 01 316 10411/4 1 01 316 10511/2 1 01 316 1062 1 01 316 10721/2 1 01 316 1083 1 01 316 1094 1 01 316 110
HOSE ADAPTORS – Male BSP thread/hose tail
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 157 1023/4 10 01 157 1031 10 01 157 104
TANK CONNECTORS – Plain spigot/male BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 235 1023/4 10 01 235 1031 10 01 235 10411/4 10 01 235 10511/2 10 01 235 1062 5 01 235 10721/2 1 01 235 1083 1 01 235 1094 1 01 235 110
28 | Building services range guide
SuperFlo ABS Imperial solvent weld fittings
COMPOSITE UNIONS – Plain/brass female parallel BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 222 1023/4 10 01 222 1031 10 01 222 10411/4 5 01 222 10511/2 5 01 222 1062 5 01 222 107
COMPOSITE UNIONS – Plain/brass taper male BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 223 1023/4 10 01 223 1031 10 01 223 10411/4 5 01 223 10511/2 5 01 223 1062 5 01 223 107
SS FEMALE COMPOSITE UNIONS – ABS/Stainless Steel 316L, BSP parallel female
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 218 1023/4 10 01 218 1031 10 01 218 10411/4 5 01 218 10511/2 5 01 218 1062 5 01 218 107
SS MALE COMPOSITE UNIONS – ABS/Stainless Steel 316L, BSP taper male
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 219 1023/4 10 01 219 1031 10 01 219 10411/4 5 01 219 10511/2 5 01 219 1062 5 01 219 107
SOCKETS – Female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 102 1023/4 10 01 102 1031 10 01 102 10411/4 10 01 102 10511/2 10 01 102 1062 5 01 102 1073 1 01 102 109
REDUCING BUSHES – Male/female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 x 3/8 10 01 113 1213/4 x 1/2 10 01 113 1221 x 3/4 10 01 113 124
29Building services range guide |
ELBOWS 90° - Female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 117 1023/4 10 01 117 1031 10 01 117 10411/2 5 01 117 1062 5 01 117 107
END CAPS – Female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 141 1021 10 01 141 10311/4 10 01 141 10411/2 10 01 141 1052 10 01 141 10621/2 5 01 141 1073 1 01 141 109
SuperFlo ABS Imperial solvent weld fittings
PLUGS – Male BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 155 1021/4 10 01 155 1031 10 01 155 10411/4 10 01 155 10511/2 10 01 155 1062 10 01 155 107
HEXAGON NIPPLES – Male BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 106 1021/4 10 01 106 1031 10 01 106 10411/4 10 01 106 10511/2 5 01 106 1062 5 01 106 107
BACK NUTS – Female BSP thread
Size (inch)
Standard pack quantity
Product Code
1/2 10 01 159 1021/4 10 01 159 1031 10 01 159 10411/4 10 01 159 10511/2 10 01 159 1062 10 01 159 10721/2 10 01 159 1083 10 01 159 1094 10 01 159 110
FULL FACE FLANGE - Undrilled
Size (inch)
Standard pack quantity
Product Code
Undrilled1/2 10 01 129 1021/4 10 01 129 1031 10 01 129 10411/4 5 01 129 10511/2 5 01 129 1062 5 01 129 1073 1 01 129 1094 1 01 129 1106 1 01 129 112
Note: It is essential that backing rings are used with all types of stub, full face and blanking flanges.
FLANGES STUB - Plain/serrated
Size (inch)
Standard pack quantity
Product Code
2 5 01 135 10721/2 5 11 135 3123 1 01 135 1094 1 01 135 1105 1 11 135 3166 1 01 135 1128 1 01 135 113
FULL FACE FLANGE - drilled
Size (inch)
Standard pack quantity
Product Code
Drilled to BS 10:1962 Table D/E1/2 10 01 130 1023/4 10 01 130 1031 10 01 130 10411/4 5 01 130 10511/2 5 01 130 1062 5 01 130 1073 1 01 130 1094* 1 01 130 1106 1 01 130 112Drilled to BS EN1092-1, PN16 (Formerly BS 4504)**1/2 10 01 319 1023/4 10 01 319 1031 10 01 319 10411/4 5 01 319 10511/2 5 01 319 1062 5 01 319 1073 1 01 319 1094 1 01 319 1106 1 01 319 112Drilled to ANSI Class 1501/2 10 01 322 1023/4 10 01 322 1031 10 01 322 10411/2 5 01 130 1062 5 01 322 1073 1 01 322 1094 1 01 322 1106 1 01 322 112
*For table D drilling, use order code 01 317 110. **Also matches PN10 drillings.
30 | Building services range guide
FULL FACE GASKETS - Drilled EPDM 410/408/426
Size (inch)
Standard pack quantity
Product Code
Drilled to BS 10:1962 Table D/E
1/2 1 03 410 1023/4 1 03 410 1031 1 03 410 10411/4 1 03 410 10511/2 1 03 410 1062 1 03 410 1073 1 03 410 1094* 1 03 410 1106 1 03 410 112
Drilled to BS EN1092-1, PN16 (Formerly BS 4504) Section 3.1:1989 table 10 & 11
1/2 1 03 408 1023/4 1 03 408 1031 1 03 408 10411/4 1 03 408 10511/2 1 03 408 1062 1 03 408 1073 1 03 408 1094 1 03 408 1106 1 03 408 112Drilled to ANSI class 1501/2 1 03 426 1023/4 1 03 426 1031 1 03 426 10411/2 1 03 426 1062 1 03 426 1073 1 03 426 1094 1 03 426 1106 1 03 426 112
Also matches PN10 drillings.
*Order Code 409 for Table D drilling.
SuperFlo ABS Imperial accessories
BLANKING FLANGES - Drilled
Size (inch)
Standard pack quantity
Product Code
Drilled to BS 10:1962 Table D/E2 5 01 313 1073 1 01 313 1094* 1 01 313 1106 1 01 313 1128 1 01 313 113Drilled to BS EN1092-1, PN16 (Formerly BS 4504)2** 5 01 323 10721/2 5 11 323 3123 1 01 323 1094 1 01 323 1105 1 11 323 3166** 1 01 323 1128 1 01 323 113Drilled to ANSI Class 1502 5 01 325 1073 1 01 325 1094 1 01 325 1106 1 01 325 1128 1 01 325 113
*For table D drilling, use order code 01 326 110** Also matches PN10 drilling.
BACKING RING – Galvanised Mild Steel
Size (inch)
Standard pack quantity
Product Code
Drilled to BS 10:1962 Table D/E1/2 1 03 416 1023/4 1 03 416 1031 1 03 416 10411/4 1 03 416 10511/2 1 03 416 1062 1 03 416 1073 1 03 416 1094* 1 03 416 1106 1 03 416 1128 1 03 416 113
Drilled to BS EN1092-1, PN16 (Formerly BS 4504) Section 3.1:1989 Tables 10 & 11
1/2** 1 03 421 1023/4 1 03 421 1031 1 03 421 10411/4 1 03 421 10511/2 1 03 421 1062 1 13 421 31121/2 1 13 421 3123 1 13 421 3134 1 03 421 1105 1 13 421 3166** 1 03 421 1128 1 03 421 113
*For table D drilling, use order code 03 415 110. ** 1/2” to 6” also matches PN10 drillings.
BLANKING FLANGES - Undrilled
Size (inch)
Standard pack quantity
Product Code
Undrilled1 10 01 131 10411/2 5 01 131 1062 5 01 131 1073 1 01 131 1094 1 01 131 1106 1 01 131 1128 1 01 131 113
Note: It is essential that backing rings are used with all blanking flanges.
FLAT GASKET - EPDM, for use with stub flange
Size (inch)
Standard pack quantity
Product Code
2 1 03 431 10721/2 1 13 411 3123 1 03 431 1094 1 03 431 1105 1 13 411 3166 1 03 431 1128 1 03 431 113
For use with stub flanges 135/139).
BACKING RING – Galvanised Mild Steel
Size (inch)
Standard pack quantity
Product Code
Drilled to BS EN1092-1, PN10 (Formerly BS 4504) Section 3.1:1989 Tables 10 & 11 *
8** 1 03 404 113Drilled to ANSI Class 1501/2 1 03 425 1023/4 1 03 425 1031 1 03 425 10411/2 1 03 425 1062 1 03 425 1073 1 03 425 1094 1 03 425 1106 1 03 425 1128 1 03 425 113
* The PN10 8” drilling has 8 holes (8” PN16 has 12 holes) and therefore is compatible with the FK 8” butterfly valve.** Made to Order (Please refer to our Terms & Conditions)
VALVE SUPPORT PLATES - Galvanised mild steel, drilled
Size (inch)
Standard pack quantity
Product Code
Drilled to BS EN1029-1, PN10/PN16 (Formerly BS 4504)
1/2* 1 03 458 1023/4 1 03 458 1031 1 03 458 10411/4 1 03 458 10511/2 1 03 458 1062 1 03 458 10721/2 1 31 459 3123 1 03 458 1094 1 03 458 1106* 1 03 458 1128 1 03 458 113
* Also matches PN10 drillings.
31Building services range guide |
SuperFlo ABS Imperial valves & accessories
O-RING SEALS - For use with socket unions
Size (inch)
Standard pack quantity
Product Code
EPDM for use with 205 series socket unions1/2 1 03 209 1023/4 1 03 209 1031 1 03 209 10411/4 1 13 209 30911/2 1 13 209 3102 1 03 306 10721/2 1 13 209 3123 1 03 209 1094 1 03 209 110
FKM for use with 204 series socket unions
1/2 1 03 211 1023/4 1 03 211 1031 1 03 211 10411/4 1 03 211 10511/2 1 03 211 1062 1 03 211 10721/2 1 13 211 3123 1 03 211 1094 1 03 211 110
VKD DOUBLE UNION BALL VALVES MANUAL BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 DKA 1023/4 1 H0 DKA 1031 1 H0 DKA 10411/4 1 H0 DKA 10511/2 1 H0 DKA 1062 1 H0 DKA 107
Note: FKM seals available on request
LOCKABLE VKD DOUBLE UNION BALL VALVES MANUAL LOCKING HANDLE BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 DLA 1023/4 1 H0 DLA 1031 1 H0 DLA 10411/4 1 H0 DLA 10511/2 1 H0 DLA 1062 1 H0 DLA 107
Note: FKM seals available on request
VKD DOUBLE UNION BALL VALVES MANUAL BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
2 1/2 1 H0 DKA 3123 1 H0 DKA 1094 1 H0 DKA 110
Note: VKD ball valves are available with flanged ends (ISO-DIN) on request. Order via Code H0 DKA F**
TKD 3-WAY BALL VALVES T-PORT BS SERIES, PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 TTA 1023/4 1 H0 TTA 1031 1 H0 TTA 10411/4 1 H0 TTA 10511/2 1 H0 TTA 1062 1 H0 TTA 107
Lockable Handle Option available upon request: Please order Code reference ‘TLA’
TKD 3-WAY BALL VALVES L-PORT BS SERIES, PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 LTA 1023/4 1 H0 LTA 1031 1 H0 LTA 10411/4 1 H0 LTA 10511/2 1 H0 LTA 1062 1 H0 LTA 107
Lockable Handle Option available upon request: Please order Code reference ‘LLA’
VXE EASYFIT DOUBLE UNION BALL VALVES BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 XEA 1023/4 1 H0 XEA 1031 1 H0 XEA 10411/4 1 H0 XEA 10511/2 1 H0 XEA 1062 1 H0 XEA 107
Note: FKM seals available on request
32 | Building services range guide
SuperFlo ABS Imperial valves & accessories
SET OF TRANSPARENT SERVICE PLUGS AND WHITE PVC TAG HOLDERS – For insertion in handle for VXE Easyfit valve customisation
Size (mm/inch)
Standard pack quantity
Product Code
16-20 / 1/2 20 LCE02025/3/4 20 LCE02532 / 1 20 LCE03240 / 11/4 20 LCE04050 / 11/2 20 LCE05063 / 2 20 LCE063
DIE CUT LABELS PLUS SOFTWARE - White waterproof A4 sheets and freeware editing software to be used with inkjet printers for VXE Easyfit valve customisation
Size (mm/inch)
No. of sheets
Total labels
Product Code
16-20 / 1/2 10 500 LSE02025/3/4 10 500 LSE02532 / 1 10 500 LSE03240 / 11/4 10 500 LSE04050 / 11/2 10 400 LSE05063 / 2 10 400 LSE063
VKR METERING BALL VALVES BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
3/8 1 H0 MBA 1011/2 1 H0 MBA 1023/4 1 H0 MBA 1031 1 H0 MBA 10411/4 1 H0 MBA 10511/2 1 H0 MBA 1062 1 H0 MBA 107
All VKD, TKD Ball valves are also available with FKM seals.
SX EASYFIT BALL CHECK VALVES BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 SXA 1023/4 1 H0 SXA 103 1 1 H0 SXA 104 11/4 1 H0 SXA 105 11/2 1 H0 SXA 106 2 1 H0 SXA 107
SX EASYFIT AIR RELEASE VALVES BS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 SAA 1023/4 1 H0 SAA 103 1 1 H0 SAA 104 11/4 1 H0 SAA 105 11/2 1 H0 SAA 106 2 1 H0 SAA 107
UV Y-TYPE STRAINERS PLAIN FEMALE ENDS - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 UVA 1023/4 1 H0 UVA 1031 1 H0 UVA 10411/4 1 H0 UVA 10511/2 1 H0 UVA 1062 1 H0 UVA 107
DIALOCK® DIAPHRAGM VALVES MANUAL - plain female ends - EPDM seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 DVA 1023/4 1 H0 DVA 1031 1 H0 DVA 10411/4 1 H0 DVA 10511/2 1 H0 DVA 1062 1 H0 DVA 107
Larger sizes available upon request. Minimum order quantities apply.
FKM or PTFE seal options available on request.
33Building services range guide |
LR PRESSURE LOADING/RELIEF VALVES PLAIN FEMALE ENDS - EPDM Seals
Size (inch)
Standard pack quantity
Product Code
1/2 1 H0 LRA 1023/4 1 H0 LRA 1031 1 H0 LRA 10411/4 1 H0 LRA 10511/2 1 H0 LRA 1062 1 H0 LRA 107
FKM or PTFE seal options available on request.Note: FKM seals available on request
Note: FKM seals available on request
Note: FKM seals available on request
SuperFlo ABS Imperial valves & accessories
FK BUTTERFLY VALVES – With gear box - EPDM Seals
Size (inch)
Standard pack quantity
Product Code
2 1/2 1 HV FKA 1083 1 HV FKA 1094 1 HV FKA 1105 1 HV FKA 1116 1 HV FKA 1128 1 HV FKA 11310 1 HV FKA 11412 1 HV FKA 115
FK Butterfly valves are also available with FKM seals, please ask for details.
FK BUTTERFLY VALVE - With Lever Handle - EPDM Seals
Size (inch)
Standard pack quantity
Product Code
1 1/2 1 H0 FKA 1062 1 H0 FKA 1072 1/2 1 H0 FKA 1083 1 H0 FKA 1094 1 H0 FKA 1105 1 H0 FKA 1116 1 H0 FKA 1128 1 H0 FKA 113
FK Butterfly valves are also available with FKM seals, please ask for details.s.
SADDLE CLIPS – Polypropylene
Size (inch)
Standard pack quantity
Product Code
16 3/8 10 03 455 10120 1/2 10 03 455 10225 3/4 10 03 455 10332/1 10 03 455 10440/11/4 10 03 455 10550/11/2 10 03 455 10663/2 10 03 455 10716/3 10 03 455 109110/4 10 03 455 110
COBRA PIPE CLIPS
Size (inch)
Standard pack quantity
Product Code
*12 10 13 434 304*16 3/8 10 13 434 305*20 1/2 10 13 434 306*25 3/4 10 13 434 30732/1 10 13 434 30840/11/4 10 13 434 30950/11/2 10 13 434 31063/2 10 13 434 31175/21/2 10 13 434 31290/3 10 13 434 313110/4 10 13 434 314125 10 13 434 315140/5 10 13 434 316160/6 10 13 434 317
*Without retaining clips. Bolts/screws not supplied.
CHAMFERING AND DE-BURRING TOOLS
DescriptionProduct Code
16-63mm pipe chamfering tool FT 55 65 1275-160mm chamfering tool FT 55 05 10
PIPE CUTTERS
DescriptionProduct Code
16-63mm pipe cutter FT 80 00 0150-125mm pipe cutter FT 80 00 0316-63mm spare cutter wheel FT 80 00 0250-125mm spare cutter wheel FT 80 00 04
SUPERFLO ONE-STEP SOLVENT CEMENT AND ECO-CLEANER
DescriptionStandard pack quantity
Product Code
500ml SuperFLO grey one-step cement
12 03 461 395
1 litre SuperFLO grey one-step cement
6 03 461 396
KOLMAT FIBRESEAL - For threaded connections
DescriptionProduct Code
Fibreseal tape 03 469 395
SILICONE REPAIR TAPE
DescriptionProduct Code
Silicone Repair Tape 03 469 400
34 | Building services range guide
35Building services range guide |
Why choose plastic pipe systems?
Plastic pipes have been at the centre of the clean water revolution since their introduction in the mid-20th century.
Ever since, significant benefits over traditional materials have been realised, and the popularity of plastic pipe systems have grown rapidly.
Plastic pipes are not only an excellent choice for transporting water, their characteristics are also ideal for a wide range of industrial applications.
Lightweight, easy to install
Lowers therisk of theft
Corrosion resistant
Reduced biofilm build-up
No hot-works required
Fasterinstallation
Costeffective
A sustainable solution
Durapipe HTA
36 | Building services range guide
37Building services range guide |
Durapipe HTA Pipe & solvent weld fittings
ELBOWS 90°
Size (mm)
Standard pack quantity
Product Code
16 15 GH4M1620 15 GH4M2025 10 GH4M2532 10 GH4M3240 10 GH4M4050 5 GH4M5063 1 GH4M6375 1 GH4M7590 1 GH4M90110 1 GH4M110125 1 GH4M125160 1 GH4M160
ELBOWS 45°
Size (mm)
Standard pack quantity
Product Code
16 15 GH8M1620 15 GH8M2025 10 GH8M2532 10 GH8M3240 10 GH8M4050 5 GH8M5063 1 GH8M6375 1 GH8M7590 1 GH8M90110 1 GH8M110125 1 GH8M125160 1 GH8M160
C-PVC PIPES, CHAMFERED BOTH ENDS - PN16
Size (mm)
Standard Length (m)
Standard pack qty
Product Code
32 3 10 GTHT321640 3 10 GTHT401650 3 5 GTHT501663 4 5 GTUBHT6375 4 1 GTUBHT7590 4 1 GTUBHT90110 4 1 GUBHT110125 4 1 GUBHT125160 4 1 GUBHT160
C-PVC PIPES, CHAMFERED BOTH ENDS - PN25
Size (mm)
Standard Length (m)
Standard pack qty
Product Code
16 3 10 GUBHT16320 3 10 GUBHT20325 3 10 GUBHT25332 3 10 GUBHT32340 3 10 GUBHT40350 3 5 GUBHT50363 4 5 GTHT6325
SOCKETS
Size (mm)
Standard pack quantity
Product Code
16 15 GHMA1620 15 GHMA2025 10 GHMA2532 10 GHMA3240 10 GHMA4050 5 GHMA5063 1 GHMA6375 1 GHMA7590 1 GHMA90110 1 GHMA110125 1 GHMA125160 1 GHMA160
T-PIECE 90°
Size (mm)
Standard pack quantity
Product Code
16 15 GHTE1620 15 GHTE2025 10 GHTE2532 10 GHTE3240 10 GHTE4050 5 GHTE5063 1 GHTE6375 1 GHTE7590 1 GHTE90110 1 GHTE110125 1 GHTE125160 1 GHTE160
REDUCING BUSHES - Short pattern
Size (mm)
Standard pack quantity
Product Code
20/16 15 GHRS2025/20 20 GHRS2532/25 10 GHRS3240/32 10 GHRS4050/40 5 GHRS5063/50 1 GHRS6375/63 1 GHRS7590/75 1 GHRS90110/90 1 GHRS110125/63 1 GRDC1263125/75 1 GRDC1275125/110 1 GHRS125160/110 1 GRDC1611160/125 1 GRDC1612
END CAPS
Size (mm)
Standard pack quantity
Product Code
16 15 GHBO1620 15 GHBO2025 10 GHBO2532 10 GHBO3240 10 GHBO4050 5 GHBO5063 1 GHBO6375 1 GHBO7590 1 GHBO90110 1 GHBO110125 1 GHBO125160 1 GHBO160
38 | Building services range guide
39Building services range guide |
Durapipe HTA Solvent weld fittings
REDUCED TEES
Size (mm)
Standard pack quantity
Product Code
20/16 15 GHTR201625/16 10 GHTR251625/20 10 GHTR252032/16* 10 GHTR321632/20 10 GHTR322032/25 10 GHTR322540/20 5 GHTR402040/25 5 GHTR402540/32 5 GHTR403250/20 5 GHTR502050/25 5 GHTR502550/32 5 GHTR503250/40 5 GHTR504063/20 1 GHTR632063/25 1 GHTR632563/32 1 GHTR633263/40 1 GHTR634063/50 1 GHTR635075/20 1 GHTR752075/25 1 GHTR752575/32 1 GHTR753275/40 1 GHTR754075/50 1 GHTR755075/63 1 GHTR756390/32 1 GHTR903290/40 1 GHTR904090/50 1 GHTR905090/63 1 GHTR906390/75 1 GHTR9075110/40 1 GHTR1140110/50 1 GHTR1150110/63 1 GHTR1163110/75 1 GHTR1175110/90 1 GHTR1190
*Made to Order (Please refer to our Terms & Conditions).
REDUCED TEES
Size (mm)
Standard pack quantity
Product Code
25/16 10 GHRD251632/16* 10 GHRD321632/20 10 GHRD322040/16* 5 GHRD401640/20 5 GHRD402040/25 5 GHRD402550/20 5 GHRD502050/25 5 GHRD502550/32 5 GHRD503263/20 1 GHRD632063/25 1 GHRD632563/32 1 GHRD633263/40 1 GHRD634075/20 1 GHRD752075/25 1 GHRD752575/32 1 GHRD753275/40 1 GHRD754075/50 1 GHRD755090/25 1 GHRD902590/32 1 GHRD903290/40 1 GHRD904090/50 1 GHRD905090/63 1 GHRD9063110/50 1 GHRD1150110/63 1 GHRD1163110/75 1 GHRD1175125/90 1 GHRD1290160/75 1 GHRD1675160/90 1 GHRD1690160/110 1 GHRD1611160/125 1 GHRD1612
*Made to Order (Please refer to our Terms & Conditions).
INSTRUMENTATION TEES - Brass thread female branch
Size (mm x inch)
Standard pack quantity
Product Code
75 x 1/2 1 GTL751290 x 1/2* 1 GTL9012110 x 1/2* 1 GML11012125 x 1/2* 1 GTL12512160 x 1/2* 1 GTL16012
*Made to Order (Please refer to our Terms & Conditions).
ADAPTOR NIPPLES A - Brass thread male
Size (mm x inch)
Standard pack quantity
Product Code
16/20 x 3/8 5 GHEAL1620/25 x 1/2 5 GHEAL2025/32 x 3/4 5 GHEAL2532/40 x 1 5 GHEAL3240/50 x 11/4 1 GHEAL4050/63 x 11/2 1 GHEAL5063/75 x 2 1 GHEAL6375/90 x 21/2 1 GHEAL7590/110 x 3 1 GHEAL90
*Made to Order (Please refer to our Terms & Conditions).
ADAPTOR NIPPLES B - Brass thread male
Size (mm x inch)
Standard pack quantity
Product Code
16/20 x 1/2* 5 GHEBL1620/25 x 3/4 5 GHEBL2025/32 x 1 5 GHEBL25
*Made to Order (Please refer to our Terms & Conditions).
ADAPTOR NIPPLES A - 316L Stainless steel male thread insert
Size (mm x inch)
Standard pack quantity
Product Code
20/25 x 1/2* 5 GHEAS2025/32 x 3/4* 5 GHEAS2532/40 x 1* 5 GHEAS32
*Made to Order (Please refer to our Terms & Conditions).
Durapipe HTA Solvent weld fittings
3 PIECE UNIONS C-PVC - Male thread brass
Size (mm x inch)
Standard pack quantity
Product Code
16 x 3/8* 5 GH3F/L1620 x 1/2 5 GH3F/L2025 x 3/4 5 GH3F/L2532 x 1 5 GH3F/L3240 x 11/4 5 GH3F/L4050 x 11/2 1 GH3F/L5063 x 2 1 GH3F/L63
*Made to Order (Please refer to our Terms & Conditions).
3 PIECE UNIONS C-PVC - Female thread brass
Size (mm x inch)
Standard pack quantity
Product Code
16 x 3/8* 5 GH3G/L1620 x 1/2 5 GH3G/L2025 x 3/4 5 GH3G/L2532 x 1 5 GH3G/L3240 x 11/4 5 GH3G/L4050 x 11/2 1 GH3G/L5063 x 2 1 GH3G/L63
*Made to Order (Please refer to our Terms & Conditions).
3 PIECE UNIONS (C-PVC) - Plastic (C-PVC) male thread
Size (mm x inch)
Standard pack quantity
Product Code
16 x 1/2 5 GH3FPB1620 x 1/2 5 GH3F/P2020 x 3/4 5 GH3FPB2025 x 3/4 5 GH3F/P2525 x 1 5 GH3FPB25
3 PIECE UNIONS (C-PVC) - Plastic (C-PVC) female
Size (mm x inch)
Standard pack quantity
Product Code
16 15 GH3P1620 15 GH3P2025 10 GH3P2532 10 GH3P3240 10 GH3P4050 5 GH3P5063 1 GH3P63
THREADED ADAPTORS FEMALE - Stainless steel insert
Size (mm x inch)
Standard pack quantity
Product Code
20/25 x 1/2* 1 GHMMS2025/32 x 3/4* 1 GHMMS2532/40 x 1* 1 GHMMS32
*Made to Order (Please refer to our Terms & Conditions).
THREADED ADAPTORS FEMALE - Brass thread*
Size (mm x inch)
Standard pack quantity
Product Code
16/20 x 3/8* 5 GHMML1620/25 x 1/2 5 GHMML2025/32 x 3/4 5 GHMML2532/40 x 1 5 GHMML3240/50 x 11/4 1 GHMML4050/63 x 11/2 1 GHMML5063/75 x 2 1 GHMML6375/90 x 21/2 1 GHMML7590/110 x 3 1 GHMML90
*BSP female (parallel) to male (taper) conversion nipples available on request. **Made to Order (Please refer to our Terms & Conditions)
THREADED CONVERSION NIPPLES
Size (inch)
Standard pack quantity
Product Code
1/2 x 1/2 1 GCNL123/4 x 3/4 1 GCNL341 x 1 1 GCNL111/4 x 11/4 1 GCNL11411/2 x 11/2 1 GCNL1122 x 2 1 GCNL2
BSP female (parallel) to male (taper) conversion nipples available on request.
TAP CONNECTORS WITH BRASS NUTS
Size (mm x inch)
Standard pack quantity
Product Code
16 x 1/2 15 GHDR1620 x 3/4 15 GHDR2025 x 1 10 GHDR2532 x 11/4 10 GHDR3240 x 11/2 10 GHDR4050 x 2 5 GHDR50
40 | Building services range guide
41Building services range guide |
Durapipe HTA Solvent weld fittings
THREADED TEES REDUCED 90° - Brass thread female
Size (mm x inch)
Standard pack quantity
Product Code
32 x 3/4 1 GHTGRL3240 x 3/4 1 GHTGRL4050 x 3/4 1 GHTGRL5063 x 3/4 1 GHTGRL63
32 x 1/2* 1 GHTGR32240 x 1/2* 1 GHTGR40250 x 1/2* 1 GHTGR50263 x 1/2* 1 GHTGR632
*Made to Order (Please refer to our Terms & Conditions).
THREADED ELBOWS 90° - Brass thread female and back plate
Size (mm x inch)
Standard pack quantity
Product Code
16 x 1/2* 5 GH4GP1620 x 1/2 5 GH4GP2025 x 3/4 5 GH4GP25
*Made to Order (Please refer to our Terms & Conditions).
THREADED ELBOWS 90° - Brass thread female
Size (mm x inch)
Standard pack quantity
Product Code
16 x 1/2* 5 GH4GL1620 x 1/2 5 GH4GL2025 x 3/4 5 GH4GL25
THREADED ELBOWS 90° - Brass thread female (For use with temperature probe)
Size (mm x inch)
Standard pack quantity
Product Code
32 x 1/2* 1 GH4M132240 x 1/2* 1 GH4M140250 x 1/2* 1 GH4M150263 x 1/2* 1 GH4M1632
*Made to Order (Please refer to our Terms & Conditions).
STRAIGHT BRASS COUPLINGS - For use with temperature contact probe
Size (mm)
Standard pack quantity
Product Code
16 1 GHMI 1620 1 GHMI 2025 1 GHMI 2532 1 GHMI 32
ANCHOR POINTS
Size (mm)
Standard pack quantity
Product Code
25 2 GHPTF2532 2 GHPTF3240 2 GHPTF4050 2 GHPTF5063 2 GHPTF63
SERRATED STUB FLANGES
Size (mm)
Standard pack quantity
Product Code
25 10 GHCS2532 10 GHCS3240 10 GHCS4050 5 GHCS5063 1 GHCS6375 1 GHCS7590 1 GHCS90110 1 GHCS110125 1 GHCS125160 1 GHCS160
BALL VALVES - Double union
Size (mm)
Standard pack quantity
Product Code
16 1 GVHCEP1620 1 GVHCEP2025 1 GVHCEP2532 1 GVHCEP3240 1 GVHCEP4050 1 GVHCEP5063 1 GVHCEP63
BALL VALVES - Flanged sockets
Size (mm)
Standard pack quantity
Product Code
75 1 GVHFEP7590 1 GVHFEP90110 1 GVHFEP11
PLAIN NIPPLES
Size (mm)
Standard pack quantity
Product Code
16 x 33* 15 GHMC1620 x 37 15 GHMC2025 x 42 10 GHMC2532 x 49 10 GHMC3240 x 57 10 GHMC4050 x 67 5 GHMC5063 x 80 1 GHMC6375 x 92 1 GHMC75
*Made to Order (Please refer to our Terms & Conditions).
Durapipe HTA Accessories
FLANGE KITS FOR ‘COMP’ BELLOWS
Size (mm)
Standard pack quantity
Product Code
40* 1 GCOMPK4050* 1 GCOMPK5063* 1 GCOMPK6375* 1 GCOMPK7590* 1 GCOMPK90110* 1 GCOMPK110125* 1 GCOMPK120160* 1 GCOMPK160
*Made to Order (Please refer to our Terms & Conditions).
EXPANSION COMPENSATORS
Size (mm)
Standard pack quantity
Product Code
32 1 GHCOMP3240 1 GHCOMP4050 1 GHCOMP5063 1 GHCOMP63
FIBREGLASS REINFORCED BACKING RINGS WITH PN16 DRILLINGS - (BVR = Polyester, BPA = Polyamide)
Size (mm)
Standard pack quantity
Product Code
FLANGE DRILLED 10/16 D.25 x 20 1 GBVR20
FLANGE DRILLED 10/16 D.32 x 25 1 GBVR25
FLANGE DRILLED 10/16 D.40 x 32 1 GBVR32B
FLANGE DRILLED 10/16 D.50 x 40 1 GBPA40
FLANGE DRILLED 10/16 D.63 x 50 1 GBPA50
FLANGE DRILLED 10/16 D.75 x 60 1 GBPA65
FLANGE DRILLED 10/16 D.90 x 80 1 GBPA80
FLANGE DRILLED 10/16 D.110 x 100 1 GBPA100
FLANGE DRILLED 10/16 D.125 x 125 1 GBPA125
FLANGE DRILLED 10/16 D.160 x 150 1 GBVR150
EXPANSION/CONTRACTION BRAIDS - Male thread x female loose nut
Size (mm x inch)
Standard pack quantity
Product Code
16 x 1/2 x 1/2* 1 GHCD/G1620 x 1/2 x 1/2 1 GHCD/G2025 x 3/4 x 3/4 1 GHCD/G2532 x 1 x 1 1 GHCD/G3240 x 11/4 x 11/4 1 GHCD/G4050 x 11/2 x 11/2 1 GHCD/G50
*Made to Order (Please refer to our Terms & Conditions).
LINEAR EXPANSION COMPENSATORS - To be flanged (PN16)
Size (mm)
Standard pack quantity
Product Code
40 1 GCOMP4050 1 GCOMP5063 1 GCOMP6375 1 GCOMP7590 1 GCOMP90110 1 GCOMP110125 1 GCOMP125160 1 GCOMP160
FLAT GASKETS FOR SERRATED STUB FLANGES - EPDM
Size (mm)
Standard pack quantity
Product Code
20 1 GJPNCS2025 1 GJPNCS2532 1 GJPNCS3240 1 GJPNCS4050 1 GJPNCS5063 1 GJPNCS6375 1 GJPNCS7590 1 GJPNCS90110 1 GPNCS110125 1 GPNCS125140 1 GPNCS140160 1 GPNCS160
EXPANSION/CONTRACTION BRAIDS (SILICONE) - Male thread x female loose nut
Size (mm x inch)
Standard pack quantity
Product Code
16 x 1/2 x 1/2 1 GHFS/G1620 x 1/2 x 1/2 1 GHFS/G2025 x 3/4 x 3/4 1 GHFS/G2532 x 1 x 1 1 GHFS/G3240 x 11/4 x 11/4 1 GHFS/G40
*Made to Order (Please refer to our Terms & Conditions).
MONOKLIP BRACKETS WITH M8 - Threaded inserts
Size (mm)
Standard pack quantity
Product Code
16 50 GHCK16/820 50 GHCK20/825 50 GHCKC25832 25 GHCKC32840 25 GHCKC40850 25 GHCKC50863 25 GHCKC63875 1 GHCKC75890 1 GHCKC908110 1 GHCKC110125 1 GHCKC125160 1 GHCKC160
42 | Building services range guide
43Building services range guide |
Durapipe HTA Accessories
RUBBER LINED PIPE CLIPS *
Size (mm) Thread
Standard pack quantity
Product Code
16 M10 50 FT PC 160020 M10 50 FT PC 200025 M10 50 FT PC 250032 M10 50 FT PC 320040 M10 50 FT PC 400050 M10 50 FT PC 500063 M10 50 FT PC 630075 M10 50 FT PC 750090 M10 50 FT PC 9000110 M10 50 FT PC 1100160 M10 50 FT PC 1601
*Single screw up to 32mm; double screw above 32mm
CHAMFERING TOOL
Size Standard pack quantity
Product Code
Up to 50mm 1 GCONE50U75-160mm 1 FT550510
TEMPERATURE PROBE KIT WITH PROBE HOLDER
Size (length x inch)
Standard pack quantity
Product Code
50 x 1/2 1 GDGSF5060 x 1/2 1 GDGSF6090 x 1/2 1 GDGSF90100 x 1/2 1 GDGSF100250 x 1/2 1 GDGSF250
TEMPERATURE CONTACT PROBE
Size Standard pack quantity
Product Code
16-32* 1 GSF1632
*Made to Order (Please refer to our Terms & Conditions).
HTA SOLVENT CEMENT
Size Standard pack quantity
Product Code
250ml 1 GRERFIXP1ltr 1 GRERFIXB
HTA SOLVENT CEMENT - THF Free
Size Standard pack quantity
Product Code
250ml 1 GRERFIXP-ECO1ltr 1 GRERFIXB-ECO
CLEANER
Size Standard pack quantity
Product Code
1ltr 1 GD171P
PIPE CUTTERS
Decription Standard pack quantity
Product Code
16-50mm pipe cutter
1 FT 80 00 01
50-125mm pipe cutter
1 FT 80 00 03
110-160mm pipe cutter
1 FT 80 00 09
16-63mm spare cutter wheel
1 FT 80 00 02
50-125mm spare cutter wheel
1 FT 80 00 04
Friaphon
44 | Building services range guide
45Building services range guide |
FriaphonSound attenuated drainage
SOUND INSULATED PIPE - With smooth endsNominal Diameter (mm)
Pipe Diameter (mm)
Standard Length (m)
Product Code
100 110 3 FP 12 12 71150 160 3 FP 12 12 73
DOUBLE COUPLERS - Standard connectionNominal Diameter (mm)
Pipe Diameter (mm)
Standard Length (m)
Product Code
100 110 10 FP 12 22 70150 160 2 FP 12 22 72
BENDS 15°Nominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 15 10 FP 12 20 19150 160 15 2 FP 12 20 31
BENDS 30°Nominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 30 10 FP 12 20 20150 160 30 2 FP 12 20 32
BENDS 45°Nominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 45 10 FP 12 20 21150 160 45 2 FP 12 20 33
BENDS 67°Nominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 67 10 FP 12 20 22
BENDS 87°Nominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 87 10 FP 12 20 24150 160 87 2 FP 12 20 36
SHORT CUSHIONING SECTIONS - Height of fall up to 10mNominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 90 5 FP 12 23 07150 160 90 2 FP 12 23 09
LONG CUSHIONING SECTIONS - Height of fall exceeding 10mNominal Diameter (mm)
Size(mm)
Bend(deg)
Standard pack qty
Product Code
100 110 90 5 FP 12 23 01150 160 90 2 FP 12 23 03
BRANCHES 45°Nominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100/100 110/110 10 FP 12 22 24150/100 160/100 2 FP 12 22 39150/150 160/160 2 FP 12 22 45
SINGLE BRANCH 921/2°- Five bossNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100/100 110 6 FP 12 26 01
SINGLE BRANCH 921/2°Nominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
150/150 160 3 FP 12 27 03
46 | Building services range guide
47Building services range guide |
FriaphonSound Attenuated Drainage
SINGLE BRANCH 921/2° - Two boss, unequalNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
150/100 160x110 3 FP 12 28 03
DOUBLE BRANCH 45°Nominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
150/100 160x110 3 FP 12 28 03
All supplied without boss connections.
DOUBLE BRANCH 921/2° – Four bossNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100/100 110/110 4 FP 12 30 01
CORNER BRANCH 921/2° – Two boss/access upstandsNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 2 FP 12 31 01
ACCESS PIPESNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 10 FP 12 25 26150 160 2 FP 12 25 28
All supplied without boss connections.
ACCESS BOSS PIPES - Three boss upstandsNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 9 FP 12 32 01
BOSS PIPES - Four boss upstands, one openNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 11 FP 12 33 01150 150 6 FP 12 33 03
STRAP-ON BOSSESNominal Diameter (mm)
Standard pack qty
Product Code
110 x 32 1 FP 12 35 01110 x 40 1 FP 12 36 01110 x 50 1 FP 12 37 01160 x 50* 10 FP 12 34 03
*For push fit connection use FP 12 39 ** boss connectors.
WASTE MANIFOLDS* - Four port
Size (mm)
Standard pack quantity
Product Code
110 18 FP 12 43 01
* For 32mm use with 32mm Rubber Boss Adaptor FP 12 40 01
For 40mm use with 40mm Rubber Boss Adaptor FP 12 40 02
For 50mm use with 50mm Solvent Boss Adaptor FP 12 41 0
REDUCERSNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
150/110 160/110 2 FP 12 25 10
SLEEVESNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 10 FP 12 25 30150 160 2 FP 12 25 32
Only for repair use.
REDUCERS - Solvent socket, single boss upstand
Size(mm) Description
Standard pack qty
Product Code
110 110-50 (Waste)
1 FP 12 38 01
FriaphonSound Attenuated Drainage
BONDING SLEEVESNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 10 FP 12 25 44150 160 2 FP 12 25 46
DOUBLE BONDING SLEEVESNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 10 FP 12 25 62150 160 2 FP 12 25 64
SOCKET PLUGSNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 10 FP 12 25 40
ACCESS CAPS - Screwed
DescriptionSize (mm)
Standard pack qty
Product Code
Spigot tail 110 1 FP 12 42 01
BOSS CONNECTORS - Solvent joint
DescriptionSize (mm)
Standard pack qty
Product Code
Ring seal sock-et/spigot for solvent joint
32 1 FP 12 39 01
Ring seal sock-et/spigot for solvent joint
40 1 FP 12 39 02
Ring seal sock-et/spigot for solvent joint
50 1 FP 12 39 03
BOSS ADAPTORS - Rubber push-fit
Size (mm)
Standard pack quantity
Product Code
32 10 FP 12 40 0140 10 FP 12 40 02
BOSS ADAPTORS - Solvent joint
DescriptionSize (mm)
Standard pack qty
Product Code
90° solvent connection
50 10 FP 12 41 01
Use for 50mm waste connection to waste manifold.
SUPPORT CLIPS - With support ring and wall fixingNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 5 FP 12 13 01150 160 2 FP 12 13 03
RUBBER LINED PIPE CLIPSNominal Diameter (mm)
Size (mm)
Standard pack qty
Product Code
100 110 50 FT PC 11 00150 160 50 FT PC 16 01
CLEANER
SizeStandard pack quantity
Product Code
1ltr 1 GD171P
PVC-U RH THF FREE SOLVENT CEMENT
SizeStandard pack quantity
Product Code
1/2 1ltr 12 03 462 397
LUBRICANT
ContentsStandard pack quantity
Product Code
125g 50 FP 12 29 70
PIPE CUTTER*
Dimension (mm)
Standard pack quantity
Product Code
50-125 1 FT 80 00 03110-160 1 FT 80 00 09
CHAMFERING TOOL
Dimension (mm)
Standard pack quantity
Product Code
75-160 1 FT 55 05 10
48 | Building services range guide
To explore our full soil and waste offering visit our website
Wait, there’s more!
aliaxis.co.uk
50 | Building services range guide
51Building services range guide |
Philmac 3G metric/imperialCompression fittings
METRIC/IMPERIAL JOINER POL X POL
Sizes Part number
20mm/½” 912225mm/¾” 913332mm/1” 914440mm/1¼” 915550mm/1½” 916663mm/2” 9177
SLIP JOINER METRIC/IMPERIAL POL X POL – No internal pipe stop, ideal flexibility for repair or retrofit
Sizes Part number
20mm/½” 9012225mm/¾” 9013332mm/1” 9014440mm/1¼” 9015550mm/1½” 9016663mm/2” 90177
METRIC/IMPERIAL END CONNECTOR POL X F.I. BSP
Sizes Part number
20mm/½” x ½” BSP 982120mm/½” x ¾” BSP 982220mm/½” x 1” BSP 982325mm/¾” x ½” BSP 983125mm/¾” x ¾” BSP 983225mm/¾” x 1” BSP 983332mm/1” x ¾” BSP 984232mm/1” x 1” BSP 984332mm/1” x 1¼” BSP 984440mm/1¼” x 1¼” BSP 985440mm/1¼” x 1½” BSP 985550mm/1½” x 1½” BSP 986550mm/1½” x 2” BSP 986663mm/2” x 2” BSP 9876
METRIC/IMPERIAL TEE - Equal POL X POL
Sizes Part number
20mm/½” 932225mm/¾” 933332mm/1” 934440mm/1¼” 935550mm/1½” 936663mm/2” 9377
METRIC/IMPERIAL REDUCING JOINERPOL X POL
Sizes Part number
25mm/¾” x 20mm/½” 913232mm/1” x 20mm/½” 914232mm/1” x 25mm/¾” 914340mm/1¼” x 25mm/¾” 915340mm/1¼” x 32mm/1” 915450mm/1½” x 25mm/¾” 916350mm/1½” x 32mm/1” 916450mm/1½” x 40mm/1¼” 916563mm/2” x 32mm/1” 917463mm/2” x 40mm/1¼” 917563mm/2” x 50mm/1½” 9176
METRIC/IMPERIAL END CONNECTORPOL X M.I. BSP
Sizes Part number
20mm/½” x ½” BSP 922120mm/½” x ¾” BSP 922220mm/½” x 1” BSP 922325mm/¾” x ½” BSP 923125mm/¾” x ¾” BSP 923225mm/¾” x 1” BSP 923332mm/1” x ¾” BSP 924232mm/1” x 1” BSP 924332mm/1” x 1¼” BSP 924432mm/1” x 1½” BSP 924540mm/1¼” x 1” BSP 925340mm/1¼” x 1¼” BSP 925440mm/1¼” x 1½” BSP 925540mm/1¼” x 2” BSP 925650mm/1½” x 1½” BSP 926550mm/1½” x 2” BSP 926663mm/2” x 1½” BSP 927563mm/2” x 2” BSP 9276
END CAP
Sizes Part number
20mm/½” 902925mm/¾” 903932mm/1” 904940mm/1¼” 905950mm/1½” 906963mm/2” 9079
52 | Building services range guide
Philmac 3G metric/imperialCompression fittings
53Building services range guide |
SLIP TEE METRIC/IMPERIAL – No internal pipe stop, ideal flexibility for repair or retrofit
Sizes Part number
20mm/½” 9032225mm/¾” 9033332mm/1” 9034450mm/1½” 9036663mm/2” 90377
METRIC/IMPERIAL TEE - Reducing POL X POL
Sizes Part number
25mm/¾” x 25mm/¾” x 20mm/½” 933225mm/¾” x 25mm/¾” x 32mm/1” 933432mm/1” x 32mm/1” x 25mm/¾” 934350mm/1½” x 50mm/1½” x 25mm/¾” 936350mm/1½” x 50mm/1½” x 32mm/1” 936450mm/1½” x 50mm/1½” x 40mm/1¼” 936563mm/2” x 63mm/2” x 25mm/¾” 937363mm/2” x 63mm/2” x 32mm/1” 937463mm/2” x 63mm/2” x 50mm/1½” 9376
ELBOW POL X POL
Sizes Part number
20mm/½” 952225mm/¾” 953332mm/1” 954440mm/1¼” 955550mm/1½” 956663mm/2” 9577
REDUCING ELBOW POL X POL
Sizes Part number
25mm/¾” x 20mm/½” 9532
TEE POL X M.I. BSP
Sizes Part number
25mm/¾” x ½” BSP 993125mm/¾” x ¾” BSP 9932
TEE POL X F.I. BSP
Sizes Part number
20mm/½” x ½” BSP 942120mm/½” x ¾” BSP 942225mm/¾” x ½” BSP 943125mm/¾” x ¾” BSP 943225mm/¾” x 1” BSP 943332mm/1” x ½” BSP 944132mm/1” x ¾” BSP 944232mm/1” x 1” BSP 944332mm/1” x 1¼” BSP 944440mm/1¼” x 1¼” BSP 945440mm/1¼” x 1½” BSP 945550mm/1½” x ½” BSP 946150mm/1½” x ¾” BSP 946250mm/1½” x 1½” BSP 946550mm/1½” x 2” BSP 946663mm/2” x 2” BSP 9476
ELBOW POL X F.I. BSP
Sizes Part number
20mm/½” x ½” BSP 962120mm/½” x ¾” BSP 962225mm/¾” x ½” BSP 963125mm/¾” x ¾” BSP 963225mm/¾” x 1” BSP 963332mm/1” x 1” BSP 964332mm/1” x 1¼” BSP 964440mm/1¼” x 1¼” BSP 965440mm/1¼” x 1½” BSP 965550mm/1½” x 1½” BSP 966550mm/1½” x 2” BSP 966663mm/2” x 2” BSP 9676
New sizes now available.
45 DEG ELBOW POL X POL
Sizes Part number
20mm/½” 902825mm/¾” 903832mm/1” 904840mm/1¼ 905850mm/1½” 906863mm/2” 9078
ELBOW POL X M.I. BSP
Sizes Part number
20mm/½” x ½” BSP 972125mm/¾” x ¾” BSP 973232mm/1” x 1” BSP 974332mm/1” x 1¼” BSP 974440mm/1¼” x 1” BSP 975340mm/1¼” x 1¼” BSP 975440mm/1¼” x 1½” BSP 975550mm/1½” x 1½” BSP 976563mm/2” x 2” BSP 9776
Philmac 3G metric/imperialCompression fittings
HOSE UNION TAP CONNECTOR
Sizes Part number
½” HOSCON 21¾” (to suit 8022 only) HOSCON 22
METRIC/IMPERIAL ¼ Turn BALL VALVE POL X POL
Sizes Part number
20mm/½”(16mm Nominal Bore) 9527225mm/¾”(16mm Nominal Bore) 9537225mm/¾”(19.5mm Nominal Bore) 9527332mm/1” (19.5mm Nominal Bore) 95373
ELBOW
Sizes Part number
20mm/½” x 15mm 152125mm/¾” x 15mm 153125mm/¾” x 22mm 153232mm/ 1” x 28mm 2543
Two part assembled to correct torque. Do not tighten further. For connections to pex pipe please refer to pipe manufacturers installation instructions and only use pex liners compatible with the pipe being used.
FLANGE ADAPTOR Flange to BS 4504
Sizes Part number
50mm/1½” x 2” 8776663mm/2” x 2” 87776
JOINER
Sizes Part number
20mm/½” x 15mm 132125mm/¾” x 15mm 133125mm/¾” x 22mm 133232mm/1” x 22mm 134232mm/1” x 28mm 1343
Two part assembled to correct torque. Do not tighten further. For connections to pex pipe please refer to pipe manufacturers installation instructions and only use pex liners compatible with the pipe being used.
METRIC SADDLE
Sizes Part number
50mm x 25mm/¾” 9063563mm x 25mm/¾” 90735
WALL PLATE ELBOW PLASTIC
Sizes Part number
20mm/½” x ½” BSP 902225mm/¾” x ½” BSP 903125mm/¾” x ¾” BSP 9032
TANK CONNECTOR ASSEMBLY – c/w Seal Washers
Sizes Part number
25mm/¾” x ¾” BSP 978032mm/1” x 1” BSP 9781
Other tank connector options available on page 61
WALL PLATE ELBOW METAL
Sizes Part number
20mm/½” x ½” BSP 922825mm/¾” x ¾” BSP 9229
HOSE UNION BIB TAP BS EN 13959
Sizes Part number
DZR ½” c/w double check valve 3022DZR ¾” c/w double check valve 3033
ARCTIC ICE RESISTANT BIB TAP
Sizes Part number
½” BSP 8021¾” BSP 80221” BSP *Water: -20°C 8023
For Arctic Resistance Ball Valves, see page 59
METRIC/IMPERIAL STOPCOCKPOL X POL
Sizes Part number
20mm/½” 282225mm/¾” 283332mm/1” 2844
METRIC/IMPERIAL STOPCOCKPOL x FI
Sizes Part number
25mm/¾” x ½” 283125mm/¾” x ¾” 283232mm/1” x ¾” 284232mm/1” x 1” 2843
54 | Building services range guide
55Building services range guide |
Philmac 3G metric/imperialLiners & connection kits
MDPE LINERS EN12201/BS 6572 (below ground) & EN12201/BS 6730(above ground)
Sizes Part number
20mm 7800225mm 7800332mm 7800450mm 7800663mm 78007
METRIC/IMPERIAL CONNECTION KIT
Sizes Part number
20mm/½” 99900225mm/¾” 99900332mm/1” 99900440mm/1¼” 99900550mm/1½” 99900663mm/2” 999007
METRIC/IMPERIAL NORMAL GAUGECONNECTION KIT BS 1972 IRS 134
Sizes Part number
½” (fits 3/8 ” LD and HD) 93012¾” 930031” 930041¼” 930051½” 930062” 93007
BLANKING PLUG
Sizes Part number
20mm/½” 912825mm/¾” 913832mm/1” 914840mm/1¼” 915850mm/1½” 916863mm/2” 9178
METRIC PVC/ABS CONNECTION COLLET
Sizes Part number
20mm 9420225mm 9420332mm 9420440mm 9420550mm 9420663mm 94207
METRIC PVC/ABS CONNECTION COLLET/KIT
Sizes Part number
½” (20mm/½” body) 94402¾” (25mm/¾” body) 944031” (32mm/1” body) 944041 ¼” (40mm/¼” body) 944051 ½” (50mm/1 ½” body)* 9440612” (63mm/2” body)* 944071
*Complete with nut and seal
COPPER CONNECTION KIT BS EN 1057 – Connection Kit for copper pipe for above and below ground use
Sizes Part number
20mm/½” x 15mm 8600225mm/¾” x 22mm 8600332mm/1” x 28mm 8600425mm/¾” x 15mm 86032
Suitable for single use only. Not suitable for PB or PEX pipe.
REDUCING SETS – BS 6572/6730 Metric & BS 1972/3284 & IRS 135 Imperial
Sizes Part number
25mm/¾” x 20mm/½” 9803232mm/1” x 20mm/½” 9804232mm/1” x 25mm/¾” 9804350mm/1½” x 25mm/¾” 9806350mm/1½” x 32mm/1” 9806463mm/2” x 25mm/¾” 9807363mm/2” x 32mm/1” 9807463mm/2” x 50mm/1½” 98076
NORMAL GAUGE REDUCING SETS
Sizes Part number
¾” x ½” 931321” x ½” 931421 x ¾” 93143
Philmac UTC Compression fittings
UNIVERSAL TRANSITION JOINERUTC X POL c/w Metric MDPE Liner
Sizes Part number
15-21mm x 20mm/½" 103215-21mm x 25mm/¾” 103321-27mm x 20mm/½" 104221-27mm x 25mm/¾” 104327-34mm x 20mm/½” 105227-34mm x 25mm/¾” 105327-34mm x 32mm/1” 105427-34mm x 40mm/1¼” 105534-39mm x 32mm/1” 107434-39mm x 40mm/1¼” 107539-43mm x 32mm/1” 106439-43mm x 40mm/1¼” 106547-49mm x 50mm/1½” 108647-49mm x 63mm/2” 108759-61mm x 63mm/2” 1097
UNIVERSAL TRANSITION ELBOW UTC X POL c/w Metric MDPE Liner
Sizes Part number
15-21mm x 25mm/¾” 153321-27mm x 25mm/¾” 154321-27mm x 32mm/1” 154427-34mm x 25mm/¾” 155327-34mm x 32mm/1” 1653
UNIVERSAL TRANSITION DOUBLE ENDED REPAIR JOINER
Sizes Part number
15-21mm x15-21mm 113321-27mm x 21-27mm 114427-34mm x 27-34mm 115534-39mm x 34-39mm 117739-43mm x 39-43mm 116647-49mm x 47-49mm 118859-61mm x 59-61mm 1199
UNIVERSAL TRANSITION REDUCED REPAIR JOINER
Sizes Part number
21-27mm x 15-21mm 114327-34mm x 21-27mm 115427-34mm x 15-21mm 115339-43mm x 27-34mm 1165
UNIVERSAL TRANSITION M.I. END CONNECTOR UTC X M.I. BSP
Sizes Part number
15-21mm x ½” BSP 123115-21mm x ¾” BSP 123215-21mm x 1” BSP 123321-27mm x ¾” BSP 124221-27mm x 1” BSP 124321-27mm x 1¼” BSP 124427-34mm x ¾” BSP 125227-34mm x 1” BSP 125327-34mm x 1¼” BSP 125427-34mm x 1½” BSP 1255
PIPE GAUGE – for use withUniversal Transition Coupling Sizes Part number
15-34mm 113527-43mm 113643-63mm 1137
56 | Building services range guide
Philmac UTC connectors guide
57Building services range guide |
GUIDE ONLY – Actual size dependant on pipe condition
UTC RANGE 15-21mm 21-27mm 27-34mm 34-39mm 39-43mm 47-49mm 59-61mm
PIPE CIRCUMFERENCE 47-66mm 68-85mm 85-107mm 107-122mm 122-135mm 148-154mm 185-192mm
Alkathene 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"
Normal Gauge IRS 134 1/2" 3/4" 1" 1-¼"
Heavy Gauge IRS 135 1/2" 3/4" 1"
Copper 15mm 22mm 28mm 35mm 42mm
Galvanised Iron 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"
Stainless Steel 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"
Metric ABS/PVC 16 & 20mm 25mm 32mm 40mm
Imperial ABS/PVC 3/8" 1/2" 3/4" 1" 1-¼" 1-½" 2"
Lead 3/8" 1/2" 3/4" 1-¼" 1" 1-½"
5lb (20mm OD) 6lb (21.6mm OD) 9lb (30.6mm OD) 7lb (37.6mm OD) 16lb (41mm OD) 12lb (48mm OD)
7lb (23.2mm OD) 11lb (32.8mm OD)
9lb (25.4mm OD)
1/2" 3/4" 1" 1-¼"
2lb (16mm OD) 4lb (25.2mm OD) 6lb (31mm OD) 9lb (39.2mm OD)
4lb (19.2mm OD) 5lb (26.4mm OD) 7lb (31.6mm OD)
Fitting selection can be made easier with use of the Philmac Pipe Gauge
CopperIf user does not want to use a UTC the copper needs to be M.I. or F.I. ended so that we can offer a Met/Imp fitting to suit. Same rule applies for 54mm O.D. copper. Use copper compression fitting to adapt to M.I. or F.I. and then use Met/Imp fitting.
LeadThe general condition of lead pipe can make sizing difficult at top and bottom tolerance. If the recommended UTC is not successful the next size, up or down, depending on fit should be offered.
Philmac Large bore PE metricFittings range
JOINER POL X POL
Sizes Part number
75 mm 818890 mm 8199110 mm 8100
REDUCING JOINER POL X POL
Sizes Part number
75mm x 63mm 818790mm x 75mm 8198110mm x 90mm 8109
TEE POL X F.I. BSP
Sizes Part number
75mm x 2” BSP 848690mm x 3” BSP 8498110mm x 4” BSP 8409
FLANGE ADAPTOR Flange to BS 4504
Sizes Part number
90mm x 3” 78798110mm x 4” 78709
END CONNECTOR
Sizes Part number
75mm x 2” BSP 888690mm x 3” BSP 8898110mm x 4” BSP 8809
ELBOW POL X F.I. BSP
Sizes Part number
75mm x 2” BSP 868690mm x 3” BSP 8698110 110mm x 4” BSP 8609
END CONNECTOR POL X M.I. BSP
Sizes Part number
75mm x 2” BSP 828675mm x 3” BSP 828890mm x 3” BSP 8298110mm x 4” BSP 8209
ELBOW POL X POL
Sizes Part number
75 mm 858890 mm 8599110 mm 8500
TEE – Equal POL X POL
Sizes Part number
75 mm 838890 mm 8399110 mm 8300
END CAP
Sizes Part number
75 mm 808990 mm 8099110 mm 8009
58 | Building services range guide
Philmac stopcock & valvesBall and back flow prevention
59Building services range guide |
STOPCOCK POL X POL
Sizes Part number
20mm/½” 282225mm/¾” 283332mm/1” 2844
STOPCOCK POL X FI
Sizes Part number
25mm/¾” x ½” 283125mm/¾” x ¾” 283232mm/1” x ¾” 284232mm/1” x 1” 2843
SINGLE CHECK NON RETURN VALVE F.I. BSP X F.I. BSP
Sizes Part number
Nominal Bore
¾” F.I. x ¾” F.I. 55022 221” F.I. x 1” F.I. 55023 271¼” F.I. x 1¼” F.I. 55024 321½” F.I. x 1½” F.I. 55025 382” F.I. x 2” F.I. 55026 50
GM FI X FI STOPCOCK (BS.5433 TYPE20)
Sizes Part number
½” x ½” F.I. 2511¾” x ¾” F.I. 25221” x 1” F.I. 25331½” x 1½” F.I. 20552” x 2” F.I. 2066
DZR DOUBLE CHECK VALVE F.I. BSP X F.I. BSP TO BS 6282 – Back Flow Prevention Category 3
Sizes Part number
Nominal Bore
½” F.I. x ½” F.I. 11101 15¾” F.I. x ¾” F.I. 11202 201” F.I. x 1” F.I. 11303 25
ARCTIC ICE RESISTANT BALL VALVE
Sizes Part number
Nominal Bore
½” 8031 15 ¾” 8032 201” 8033 25
BALL VALVE M.I. X M.I. BSP
Sizes Part number
Nominal Bore
¾” M.I. x ¾” M.I. 55402 16 1” M.I. x 1” M.I. 55403 19.5
AIR RELEASE VALVE F.I. BSP
Sizes Part number
Nominal Bore
1” BSP 55033 25
METRIC/IMPERIAL END CONNECTORPOL X M.I. BSP
Sizes Part number
20mm/½” x ½” BSP 922120mm/½” x ¾” BSP 922220mm/½” x 1” BSP 922325mm/¾” x ½” BSP 923125mm/¾” x ¾” BSP 923225mm/¾” x 1” BSP 923332mm/1” x ¾” BSP 924232mm/1” x 1” BSP 924332mm/1” x 1¼” BSP 924432mm/1” x 1½” BSP 924540mm/1¼” x 1” BSP 925340mm/1¼” x 1¼” BSP 925440mm/1¼” x 1½” BSP 925540mm/1¼” x 2” BSP 925650mm/1½” x 1½” BSP 926550mm/1½” x 2” BSP 926663mm/2” x 1½” BSP 927563mm/2” x 2” BSP 9276
Liners to suit MDPE pipe are required for WRAS requirements, please see page 55 for these items.
¼ TURN BALL VALVE POL X POL
Sizes Part number
Nominal Bore
20mm/½” 95272 1625mm/¾” 95372 1625mm/¾” 95273 19.532mm/1” 95373 19.5
BALL VALVE F.I. X F.I. BSP
Sizes Part number
Nominal Bore
¾” F.I. x ¾” F.I. 55002 161” F.I. x 1” F.I. 55003 19.51¼” F.I. x 1¼” F.I. 55004 261½” F.I. x 1½” F.I. 55005 322” F.I. x 2” F.I. 55006 40
FOOT VALVE F.I. BSP
Sizes Part number
Nominal Bore
¾” BSP 55012 221” BSP 55013 271¼” BSP 55014 321½” BSP 55015 382” BSP 55016 50
Metric/Imperial BSP End Connectors (for these Valves)
60 | Building services range guide
Philmac BSP threadedFittings range
TEE FEMALE
Sizes Part number
½” BSP 4511¾” BSP 45221” BSP 45331¼” BSP 45441½” BSP 45552” BSP 4566
PLUG
Sizes Part number
½” BSP 4011¾” BSP 40221” BSP 40331¼” BSP 40441½” BSP 40552” BSP 4066
BUSH – REDUCING
Sizes Part number
¾” x ½” BSP 41211” x ½” BSP 41311” x ¾” BSP 41321¼” x ½” BSP 41411¼” x ¾” BSP 41421¼” x 1” BSP 41431½” x ½” BSP 41511½” x ¾” BSP 41521½” x 1” BSP 41531½” x 1¼” BSP 41542” x ½” BSP 41612” x ¾” BSP 41622” x 1” BSP 41632” x 1¼” BSP 41642” x 1½” BSP 41653” x 2” BSP 41864” x 3” BSP 4198
NIPPLE – REDUCING
Sizes Part number
¾” x ½” BSP 42211” x ½” BSP 42311” x ¾” BSP 42321¼” x ½” BSP 42411¼” x ¾” BSP 42421¼” x 1” BSP 42431½” x ½” BSP 42511½” x ¾” BSP 42521½” x 1” BSP 42531½” x 1¼” BSP 42542” x ½” BSP 42612” x ¾” BSP 42622” x 1” BSP 42632” x 1¼” BSP 42642” x 1½” BSP 4265
REDUCING SOCKET
Sizes Part number
¾” x ½” BSP 43211” x ½” BSP 43311” x ¾” BSP 43321¼” x 1” BSP 43431½” x ¾” BSP 43521½” x 1” BSP 43531½” x 1¼” BSP 43542” x ¾” BSP 43622” x 1” BSP 43632” x 1½” BSP 4365
NIPPLE
Sizes Part number
½” BSP 4211¾” BSP 42221” BSP 42331¼” BSP 42441½” BSP 42552” BSP 4266
SOCKET
Sizes Part number
½” BSP 4311¾” BSP 43221” BSP 43331¼” BSP 43441½” BSP 43552” BSP 4366
ELBOW FEMALE
Sizes Part number
½” BSP 4611¾” BSP 46221” BSP 46331¼” BSP 46441½” BSP 46552” BSP 4666
ELBOW MALE X FEMALE
Sizes Part number
½” x ½” BSP 4691¾” x ¾” BSP 46921” x 1” BSP 46931¼” x 1¼” BSP 46941½” x 1½” BSP 46952” x 2” BSP 4696
Philmac BSP threadedFittings range
61Building services range guide |
M.I. BSP HOSE TAILS
Sizes Part number
½” BSP RXHT15¾” BSP RXHT201” BSP RXHT251¼” BSP RXHT321½” BSP RXHT402” BSP RXHT50
IBC SWIVEL-IT ADAPTORS
Sizes Part number
2” x ¾” F.I. BSP 60UD075B2” x 1” F.I. BSP 60UD10B2” x 2” F.I. BSP 60UD20B
N.B. All threads are BSP tapered. Use PTFE Tape on threads for lubrication purposes. Do not overtighten.
HIGH FLOW BALLCOCK - with nut
Sizes Part no.
¾” standard thread 25mm tail RXPTV20¾” long thread 45mm tail c/w nut RXPTV20L¾” long thread 45mm tail bent arm RXPTV20B
PIPE CUTTER
Sizes Part no.
Up to 32mm (Medium) 1769Up to 63mm (Large 1770
SPANNER
Sizes Part no.
20 - 32mm ‘Y’ spanner (plastic) 7024320 - 32mm ‘Y’ spanner 702432 - 63mm “C” spanner 704740 - 63mm ‘Y’ spanner 705750 - 110mm ‘C’ spanner 7050
PIPE CLIPS Suitable for MDPE pipe
Sizes Part number
16mm (oc) 430520mm (oc) 430625mm (oc) 430732mm (cc) 430840mm (cc) 430950mm (cc) 431063mm (cc) 431290mm (cc) 4313110mm (cc) 4314
(oc) openclip, (cc) closedclip.
CAP
Sizes Part number
½” BSP 4901¾” BSP 49021” BSP 49031¼” BSP 49041½” BSP 49052” BSP 4906
MALE THREADED TANK CONNECTOR WITH FEMALE INLET
Sizes Part number
½” BSP RXTTI15¾” BSP RXTTI201” BSP RXTTI251¼” BSP RXTTI321½” BSP RXTTI402” BSP RXTTI50
CUT TO SIZE TANK CONNECTOR KITS (PVC) – Containing long thread (1 ft long), backnuts (2) and a washer
Sizes Part number
½” BSP TCK050¾” BSP TCK0751” BSP TCK100
Pipe Repair KitRepairs Metric/Imperial Damaged Pipe
20mm 1/2"
Contents:1 x Length of pipe
1 x 3G Metric/Imperial Slip Coupling
1 x 3G Metric /Imperial Joiner
4 x Liners
Tel: +44 (0) 1323 847323www.philmac.co.uk Diplocks Way, Hailsham, East Sussex BN27 3JF
Other pack sizes available
Part no. PRK20
Seven into one will go
High Density Class C BS 3284 High Density Class D BS 3284 IRS 136 Heavy Gauge BS 1972/61
Blue MDPE BS 6572 Black MDPE BS 6730 Low Density Class C BS 1972 Low Density Class D BS 1972
philmac header 105 x 60 20mm_ALL AS ONE_FINAL.indd 1 18/04/2017 13:43
Philmac Accessories
SQUEEZE OFF TOOLS
Sizes Part number
20-32mm MINI203220-63mm MIDI2063
PIPE REPAIR KITS
Sizes Part number
Pipe repair kit 20mm PRK20Pipe repair kit 25mm PRK25Pipe repair kit 32mm PRK32
N.B. All threads are BSP tapered. Use PTFE Tape on threads for lubrication purposes. Do not overtighten.
aliaxis.co.uk/aboutus
wem kelifefl w
Aliaxis UK reserves the right to modify the details in this publication as products and specifications are updated and improved.
The content of this publication is for general information only and it is user’s responsibility to determine the suitability of any product for the purpose intended.
Glynwed Pipe Systems Ltd t/a Durapipe UK and Philmac, registered in England 01698059. An Aliaxis company. Registered Office: Dickley Lane, Lenham, Maidstone, Kent, ME17 2DE.
Telephone: +44 (0) 1543 471680E-mail: [email protected]: aliaxis.co.uk
Telephone: +44 (0) 844 335 0016E-mail: [email protected]: aliaxis.co.uk/philmac
Distributor:
Vers
ion:
V1.1
2021