Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Building A BirdhouseBy: Dean Kuhn
Blueprint:Features:1. Length and width of
every PVC piece2. Amount of PVC needed3. Tools that may be
needed4. Pictures of what the
PVC pieces and the finished result should look like
Tools:Tools: 1. Azek PVC(Premature Ventricular Contraction)
2. Drill / Driver3. Circular Saw4. Screws/Nails5. Pencil6. Ruler7. Drill Bit
Steps:Steps:1. Measure out PVC according to
blueprint2. Cut PVC with circular saw3. Use a drill / driver to put the
pieces of PVC together with screws
4. Use a drill bit to add a hole into the front of the birdhouse and a smaller drill bit to add the two bottom holes
5. Clean up everything
Finish: Time (1 Birdhouse): Approx. 40 min
Fun Fact: We actually build three birdhouses, building for 90 minutes!