product guide

This product guide was put together from the front seat of Stew Johnsons van. We were on the road to Dallas for the beginning of Props Megatour 10.

FRAMES

Offset thickness headtube

Externaldowntube

gusset

Internaltoptubegusset

Extra wide rear endtapered stays13.25 - 13.5

10mm or 14mmmicro dropouts

11.5 heightMid BB

20.7 or 21.1toptube

74.569

Removable brake

hardware

Integratedseatclamp

8.6 standover

The TrailOrPark is Kriss Kyles BSD frame, designed with technical park and trail riding in mind this steed is light, strong and ultra responsive. It has a real short back end slammable to just under 13.25 and a roomy front end due to the laid back seat tube angle.

Colours: Red, Black or Grey.Weight: 4.7lbs

The WZA (pronounced Wozza) has been designed exactly to Mike Taylors specification. There are quite a few neat but different features on this frame.The dropouts are designed to fit a peg and hubguard exactly using a 25-9 gear with no over-hang at all, they are also slotted forwards a little extra so you can take your wheel on and off without taking your chain apart. Note you need to use a halflink on this frame, we recommend using the Shadow halflink chain.

Colours: Black or Flat raw.Weight: 4.8lbs

FRAMES

Offset thickness headtube

Externaldowntube

gusset

Externaltoptubegusset

Extra wide rear endtapered stays

13.55

14mmmicro

dropouts

11.5 heightMid BB

20.6 or 21.1toptube

7571

Integratedseatclamp

No brake mounts

8.3 standover

Mike Jersey Taylor signature series

FRAMES

The Forever is the original BSD frame, with comfortable geometry this frame is built for everyone and is available in four toptube lengths. The Forever has been updated for 2011 with some changes including a new wider rear end, toptube gusset, ovalized downtube and a slotted seatclamp...

Colours: Black, Flat raw or Flat white.Weight: 4.8lbs.

Offset thickness headtube

Externaldowntubegusset

External toptube gusset

Extra wide rear endtapered stays13.5 - 13.75

*NOTE: 20.5 frame has 13.25 - 13.5

14mm dropouts

11.5 heightMid BB

20.5, 20.8, 21 or 21.2toptube length

74.571

Removable brake

hardware

Integratedseatclamp

8.5 standover

Mike Jersey Taylor signature series V2

FORKS

Fully heat treated 4130 chromo forkChrome, black, white, red or raw1.97lbs/890g

7075 steerer cap

Integrated headset race

Investment cast10mm dropout

32mm offset

Tapered legs

BSD Acid face logo

Machined one piece steerer

V2

V2

TOO LOOSE BARRise: 8 , Width: 28 Upsweep: 3, Backsweep: 13 Weight: 1.45lbsChrome, black, flat white, red or raw

VARIETY BARRise: 8, Width: 27

Upsweep: 2, Backsweep: 11 Weight: 1.5lbs

Chrome, black, red or raw

BARSHIGHLANDER BARRise: 8.5, Width: 29 Upsweep: 2, Backsweep: 11 Weight: 1.6 lbsChrome, black, flat white, red or raw

WZA BARRise: 8.5

Width: 28 Upsweep: 2

Backsweep: 11 Weight: 1.65 lbs

Black, flat white or raw*New extra tough Mike Taylor street bar

STEMSRACE STEMFull 7075-T6 top loader stemInternally machinedCNC machined logoHollow stem bolts for bar clampingBlack, grey, polished silver,purple, blue, red or gold280g - 10oz

BLACKNECK STEMFull 7075-T6 front loader stem

Internally machinedCNC machined logo

Hollow stem bolts for bar clampingBlack, grey, polished silver,

purple, blue, red or gold250g 9oz

Female 14mm axleHollow heat treatedCrMo with 3/8 bolts

HUBS

FRONT STREET HUB *BSD Front Street hubguard available seperately

9t DRIVER3 x extra wide pawl springs for increased reliability and noise.

BACK STREET HUB *BSD Back Street hubguard available seperately

9t driver with polymer bushing

Push together assemblycones pull off,

hubguard pushes on

Colours: Black, grey, polished, red, blue, gold and purple.

Female 14mm axleHollow heat treatedCrMo with 3/8 bolts

Male version. Weight: 418g

Male 14mm axleHollow heat treatedCrMo with 7075 nuts

Female version. Weight: 416g

Female 14mm axleHollow heat treatedCrMo with 3/8 bolts

Weight: 245g

6061 T6 shell6061 T6 shell

Angled flangesrecessed spoke holes Angled flanges

Precision sealed6902 Japanese bearings

Precision sealed6902 Japanese bearings

HUBGUARDS

JERSEY BARRIER HUBGUARDHubguards designed specifically for your hub Cassette #1 - for Odyssey, Shadow, WTP and similar 14mm hubsCassette #2 - for Primo Mix onlyCassette #3 - for Profile and Madera onlyCassette #4 - for BSD Back Street

Front Street - for BSD Front StreetMarmoset - for GSport Marmoset onlyRatchet - for GSport Ratchet onlyVandero2 - for Odyssey Vandero2 only

Cassette #4 Jersey Barrier on BSD Back Street male hub

Cassette #4 Jersey Barrier on BSD Back Street female hub

SEATS & POSTS

SKEET seatFat street Pivotal

Tear resistant KevlarRASTA embroidery

317g 11.2oz

SLINGER seatFat street pivotal Tear resistant KevlarNew pivotal patchEmbossed logo317g 11.2oz

*Barspin friendly

STAMP seatSlim pivotal

Tear resistant KevlarNew pivotal patch

Embossed logo244g - 8.6oz

BLITZED post135mm pivotal seatpost6061 aluminiumBlack, grey, polished silver,purple, blue, red or gold3.5oz/100g

SUPERLITE SPROCKETSuper tough 7075 aluminium construction8mm thick at the edge for strength6mm thick in the centre to save weightCentre bore 15/16(comes with 19mm and 22mm steel adaptors)Black, grey, polished, purple, blue, red or gold

Weight :23t - 54g25t - 70g28t - 90g29t - 94g30t - 98g

SPROCKETS

SUPERLITE BBMid or SpanishFully CNCd 6061 aluminium spacersSealed precison bearingsHollow crank arm bolt19mm or 22mm versionsBlack, grey, silver, purple, blue, red or gold

INTEGRATED HEADSETFully CNC 6061 aluminium new smaller topcapSealed precison bearingsCampy specificationBlack, grey, silver, purple, blue, red or gold

BEARINGS

Antony Lille, San Sebastian, Spain. Photo by Freddy Bermond

www.bsdforever.com