Upload
antoniobarboza
View
13
Download
0
Tags:
Embed Size (px)
Citation preview
Atlas Copco Waterwell Drilling Rigs
T2W-III
Rotary and DTH Drilling
30,000 lb (13,607 kg)
A NEXT GENERATION DRILLING SYSTEM
THE T2W SERIES III
POWERThe T2W-III is a single engine drill. The optional 500-horsepower
engine provides plenty of power either on-highway or when drilling.
Selection between drill and drive mode is made through a proven split-
shaft PTO drive system.
SINGLE TUBE DERRICKThe flexible T2W-III tubular derrick design is able to accommodate
casing hammer, dual wall, or drill and drive systems. Though lighter in
weight than a traditional lattice style derrick, the T2Ws tower provides
superior strength and resistance to linear and torsional deflection.
The open working area around the tower and swing-open table give the
operator ample room for large hole work or welding around casing.
The Atlas Copco T2W has a long history as a robust, reliable water well drill rig built to the highest
standards. It is not by coincidence that customers choose the T2W when they are looking for a drill that
delivers high productivity even in the most rugged conditions.
The new T2W-III incorporates many improvements derived from customer suggestions while maintaining the
features that earned the rig its superior reputation. The new rig is designed to meet the changing demands of
todays market, while continuing to reduce the cost of ownership.
FEED SYSTEMThe single-cylinder cable feed system is
internal to the tubular derrick, protecting
moving components from exposure to the
typical drilling environment and rod handling
operations. Experience has shown that this
design provides lower maintenance costs and
extended component life.
Major components of the feed system are
engineered to be larger and more mechanically
efficient, thereby contributing to reduced
fatigue and maintenance. Additionally, internal
bearings are packed with maintenance-free
lubricating compound.
FLUID OPTIONSThe new T2W-III caters to a wide range of drilling applications
with air and mud options. The 900/350 on-board air compressor
gives it extended air capability.
PIPE HANDLINGThe T2W-IIIs newly designed swing in/swing out carousel
is hydraulically actuated, making it efficient, safe and easy
for tripping in and out of the hole. The carousel has back-
loading capability, allowing easy loading and unloading into
the rigs rod box when drilling in excess of the carousels
capacity.
The new optional 15K winch with two-part line matches
the pullback of the rig, giving the operator the flexibility
to trip out of the hole with the winch or the head. The
dual hoist and jib controls allow the helper to load
and unload the carousel from the helpers side.
An optional single pipe loader and larger rod box can
be offered as an alternative to a carousel depending
on the operators preference for rod handling.
DECK SPACEFor a small rig the T2W-III has a surprising amount
of free deck space. The deck is uncluttered, making
it easier to perform service and maintenance.
HEADThere are two options available for the head. One is
a gear driven head constructed with oversized gears,
shafts and bearings for large torque applications, and
the other is a smaller, more compact hydraulic vane
driven head for lower torque operation. Both options
are three-speed.
The rotary head slides in one direction to clear the hole
for handling pipe with the main hoist, auxiliary hoist, or
sand reel.
UNRIVALLED AFTERMARKET
SUPPORTAdding to the value of the T2W-III is the after-sales support
provided by Atlas Copco. Atlas Copcos 80,000 square foot
parts distribution center near the factory supports an extensive
network of sales and service outlets spanning 60-plus countries.
plications
compressor
carousel
d easy
back-
into
sels
es
le
, or
s support
uare foot
extensive
countries.
A SELECTION OF FEATURES AND OPTIONS ON THE T2W-IIIFOR A MORE COMPREHENSIVE FEATURES LIST, PLEASE CONTACT YOUR LOCAL ATLAS COPCO CUSTOMER CENTER.
Atlas Copco Drilling Solutions
www.atlascopco.com/wwdrills
www.deepholedriller.com
Copyright
17 N
ovem
ber
2011 A
tlas C
opco D
rilli
ng S
olu
tions
Compressor
500 CFM /200 PSI (236 l/s / 14 Bar)
750 CFM/300 PSI (354 l/s / 20 Bar)
900 CFM/350 PSI (425 l/s / 24 Bar)
No air compressor or air piping
Options
Water injection
On-board mud
Hydraulically operated off-board mud piping
350 Gallon Swing up mud pit with Moyno grout pump
Floating sub spindle
DHD lubricator
Single rod loader (cannot be used with carousel)
Pipe spinner
6x6 hydraulic front drive
Larger rod box (cannot be used with carousel)
Automatic Allison transmission
Pullback 30,000 lbs (13,607 kg)
Pulldown 30,000 lbs (13,607 kg)
Rotary Head
Option 1 Option 2
2 motor spur gear tophead, 3-speed 8 300 ft-lb @ 0 to 85 rpm
12 000 ft-lb @ 0 to 80 rpm 6 213 ft-lb @ 0 to 119 rpm
8 000 ft-lb @ 0 to 110 rpm 2 850 ft-lb @ 0 to 255 rpm
3 500 ft-lb @ 0 to 275 rpm 2 5/8 inch Spindle ID
2 1/2 inch Spindle ID
Both options have hydraulic off-hole slide to the right
Hoisting System
Main Hoist
Standard 12 000 lb (5 443 kg) 150 ft/min (45.7 m/min)
Option 15 000 lb (6 803 kg) 146 ft/min (44.5 m/min)
2 part winch line for main hoist
Aux Hoist8 000 lb (3 629 kg) with integral brake, 85 ft/min (35.9 m/min)
4 000 lb (1 814 kg) with integral brake, 120 ft/min (36.6 m/min)
Sandreel 2 000 lb without clutch
Technical data T2W-III
HYDRAULIC PIPING
The mud manifold to the rotary
head is operated by toggle
switches from the console
actuating ball valves via
hydraulic cylinders removing
maunally operated valves.
ROBUST TOWER TRUNNION AND
HYDRAULIC PINNING CYLINDER
The T2W-IIIs tower trunnion has been
improved to give added strength.
Mounted on the back plate of the
trunnion is a hydraulic tower pinning
cylinder operated from the console.
MUD PIT
The swing up mud pit is a great addition
to the T2W for the geothermal driller.
The 350 gallon mud pit allows for the
mud and cuttings to be contained.
6 X 6 DRIVE
Designed to handle steep
inclines, mud, ruts, wet
or slippery conditions and
unstable roads. This hydraulic
drive system offers on-demand
front wheel drive.