8/11/2019 Bringing Toolholders Up to Speed

http://slidepdf.com/reader/full/bringing-toolholders-up-to-speed 1/2

For the Wichita, Kansas, division of aircraft manufacturer Boeing,

one aspect of effective high speed machining is finding the right

balance. The division machines aluminum at speeds ranging from

15,000 to 40,000 rpm. To cut at these high speeds as effectively as

possible, Boeing uses both pre-balanced and balanceable toolholders.

Pre-balanced toolholders are manufactured to a particular balance

level up to a particular speed and are only balanced by the end user

with the removal of metal from the toolholder. Although more

economical, this method can be limited, inconsistent and not easily

performed. With ever-increasing spindle speeds, the overall balance

of the toolholder, cutting tool and retention stud assembly become

more crucial.

Balanceable toolholders are also manufactured to a particular

balance level up to a particular speed. They feature an adjustment

system that allows for re-balancing without metal removal. Through

the use of a toolholder balancing system, these toolholders can be

re-balanced according to the customer's tight tolerances.

Boeing Wichita was doing OK with the toolholders it was using but

wanted to run more effectively at high speeds. So Boeing decided to

invest in products from Lyndex Corp. (Northbrook, Illinois) through

Manufacturing Tools and Supplies. Among the products were the

company's "HSBalance" balanceable toolholders. A series of drilled

and tapped holes that is parallel to the centerline of the toolholder

allows screws and weights to be added or removed to compensate

for imbalance in the tool and to fine-tune precision balance. Because

of the positioning of the adjustment holes, the screws are not

subject to centrifugal force. "Our technique results in a holder that's

as close to absolute balance as possible," says Frank Fullone, vice president/general manager,

Lyndex.

Along with improving productivity, the use of a balanceable toolholder balanced to the

appropriate specifications during high speed machining can decrease chatter and vibration,

positively affecting the life of the spindle, the life of the cutting tool and the surface finish.

"High speed machining and balanceable toolholders are a necessary combination," Mr. Fullone

continues. "Particular accuracies and finishes are not achievable with a standard toolholder."

Boeing's Wichita division specializes in manufacturing 737 airplanes. To produce these planes,

Boeing now uses thousands of Lyndex products—about 75 percent of its offering—includingstandard CAT 40 adapters, HSK adapters and BT tapers, milling chucks, and some right angle

heads. Along with high speed, Boeing's applications also require long gauge length toolholders,

sometimes up to 14 inches, used for Boeing's deep pocket work.

"We use Lyndex in just about every application you can think of," says Larry McAdow, equipment

engineer of Boeing Wichita. In a toolholder, Boeing experts look for taper quality, balance

quality and longevity. "Lyndex consistently meets our criteria," Mr. McAdow says.

"Adapters are like perishable tools for Boeing...at the end of two years they replace them,"

explains Lee Ward, distributor for Manufacturing Tools and Supplies.

Over half of Boeing's orders from Lyndex are custom. Boeing provides dimensions and puts in a

request to Lyndex. Lyndex then notifies the end-user if functional or safety issues arise. I f the

request can be met, drawings are supplied within a week. Boeing then reviews the blueprint to

confirm that it meets gauge length and tolerance requirements. Upon approval, the order is

processed and the product is delivered.

"Today applications are more specialized, so customers depend on technical support," says Mr.

Ward. "If Lyndex offers something that doesn't meet Boeing requirements, they're good at

changing the configuration."

Comments are reviewed by moderators before they appear to ensure they meet Modern Machine Shop’s

Bringing Toolholders Up To Speed

For the Wichita, Kansas, division of aircraft manufacturer Boeing, one

aspect of effective high speed machining is finding the right balance.The division machines aluminum at speeds ranging from 15,000 to 40,000rpm. To cut at these high speeds as effectively as possible, Boeing usesboth pre-balanced and balanceable toolholders.

Case Study From: 9/15/2000 Modern Machine Shop

Click Image to Enlarge

At Boeing Wichita, using

high spindle speedseffectively calls for both

balanced and balanceable

toolholders. An example

of the latter is shown.

At Boeing Wichita, using

high spindle speeds

effectively calls for bothbalanced and balanceable

toolholders. An example

of the latter is shown.

MMS ONLINEChannel Partners

nging Toolholders Up To Speed : Modern Machine Shop http://www.mmsonline.com/articles/bringing-toolholders-up-to-speed

2 17-08-2014 20:16

8/11/2019 Bringing Toolholders Up to Speed

http://slidepdf.com/reader/full/bringing-toolholders-up-to-speed 2/2

nging Toolholders Up To Speed : Modern Machine Shop http://www.mmsonline.com/articles/bringing-toolholders-up-to-speed

2 17-08-2014 20:16