Bracketeer Dragster Story - ed Quayedquay.com/dragsters/Bracketeer.pdf · 2006-09-08 · Bracketeer Dragster Story Ed Quay started building dragsters in 1989 as another segment of

Bracketeer Dragster StoryEd Quay started building dragsters in 1989 as another segment of our chassis business. We saw the dragster marketas the next area of drag racing where growth would occur. The past 12 years have seen our dragster sales reach 136cars. Basically that is building one car a month on a custom build basis. We build a car as you want it, not a “fits all”type.

When we began building dragsters we built a very fancy (high dollar) car that appealed to a limited clientele and theywere very successful. As time went by we saw the need for a car that was more cost conscious, one that appealed to agreater segment of the racers wanting a dragster. The “Bracketeer” was born. The initial concept was to design a carthat did not sacrifice quality in the quest to lower the price. We also wanted a car that was very easy to identify as an“ed Quay” car without asking. We accomplished both objectives. Some very bold decisions were made that allowed usto build the car quicker ( less time involved translates into a lower price) and still give you, the customer, a high qualitycar. We started by applying the old axiom “KISS” (keep it simple stupid). That’s exactly what we did, kept it simple sothat the manufacturing process was much less time consuming. The chassis is as basic as it gets but one that stillfollows all of the SFI guidelines concerning safety and craftsmanship. The body is constructed of fiberglass, a toughresilient lightweight material that gave us great leeway in design and allowed for the “different look” of the “Bracketeer”.The driver compartment is user friendly with a “sit up” back angle and a low body so the driver can see what is occurringNOW!! If you want to win races you have to be able to see both the finish line and the other car.

From it’s debut in late 1995 this car started winning races and track championships. In 1996 and 1997 Santo Volpe wonback to back track championships at one of the toughest tracks in the country, Maple Grove Raceway in Reading PA.1998 saw Joe and Renee Cabets become the track champions at not one but two tracks in the same year, NumediaRaceway in central PA and Island Dragway in northern NJ. The winning continued in the year 2000 with TonyGambardella winning the Atco NJ track championship and Mike Turocy winning the Maple Grove championship. Alongthe way edQuay himself built a “Bracketeer” and proceeded to win 2 NHRA Divisionals, one at Virginia MotorsportsPark in 1997 and the other at Maple Grove in Reading PA in 1999. He also was runner-up at a race in the 5 day MorosoBracket series in November 1998 and won numerous other races in his short driving career. Not only does he buildthem but he races too! The “Bracketeer” is a very successful race car design.

Santo Volpe1996 and 1997

Maple Grove RacewayS/P Champion

Joe and Renee Cabets1998

Numidia RacewayIsland DragwayS/P Champion

Division 1Race of Champions Winner

Ed QuayFMDRS S/C1997

Virginia Motorsports ParkFMDRS S/C1999

Maple Grove Raceway1998 Runner-up at the

5-Day Moroso Bracket Series

Tony Gambardella2000

Atco RacewayS/P Champion

Mike Turocy2000

Maple Grove RacewayS/P Champion

Buy a ed Quay“Bracketeer”

And your picturecould be here!

1999 Catalog Rt. 100 and State St. • Pottstown, PA 19464 • (610) 326-8050

Rt. 100 and State St. • Pottstown, PA 19464 • (610) 323-9560 2001 Catalog

Funny Cars Have Fiberglass Bodies,Why Not Dragsters?

TheAdvantages

areObvious!

Take it off

It Takes less than a minute to completelyremove the body and it goes back on justas easy.

Flip it up and hold it up, with the availablebody pole, everything is exposed andwithin easy reach.

orWorkingOn ThisCar IsEasy!

Flip it up

Engineered to be an affordable, betterrace car. We race every week, so weknow what it takes to do things right.

Functional good looks! Everythingis simple well thought out and userfriendly.

Tough

StrongLight Weight

Doesn't DentDistinctive Styling

Easy To Paint* & Letter*Do Not Cure Paint in an Oven. AIR DRY ONLY!

Rt. 100 and State St. • Pottstown, PA 19464 • (610) 323-9560 2001 Catalog

The Choice Is Yours!

Battery Tray and Mount, Ignition Mount

Pedals & Master Cylinder Assembly

Shifter & Mount

Parachute Release Handle & Cable,Switch Panel

Fuel Cell, Fuel Pump / Filler Mounts

Radiator & Mount, Big DriverProtection Plate & Fuel Cell

Front Axle, Rack & Pinion SteeringBox & Weight Mount

Features

Photos show some "BRACKETEER""BRACKETEER""BRACKETEER""BRACKETEER""BRACKETEER"

features in their customer assembledstate and some products that are

customer supplied.

Simple Fantastic

Let ed Quay Race Carsbuild it your way!orStart with our $4995.00

100 series package and build ityourself, as your budget allows.

Photo shows extra cost options

to

page•5

SOLID SUSPENSION DRAGSTER

STAGE 1 PACKAGE PRICE INCLUDES:

215” W. B. 4130 CHROMOLY CHASSIS-JIG FIT AND HELI-ARC (TIG) WELDED1 5/8” x .083 CAGE STD.STOCK TYPE 9” FORD REAR HOUSING WITH SYMMETRICAL ENDS STANDARD.FILL, DRAIN & VENT IN REAR HOUSINGROLLOVER LEG PROTECTION TUBE (between top rails)LOWER RADIATOR MOUNTING TUBE4130 ENGINE LIMITERS (Chevrolet only– all others extra)SUPER STRONG LIGHT WEIGHT FIBERGLASS BODY (flip-up, 1 pc. Nose to driver compartment)FULL REAR BODY PANELS (fiberglass)BODY & BACK PANELS MOUNTED WITH PRO STOCK STYLE DZUS BUTTONSFIBERGLASS SEAT (21 3/4” shoulder width)CLEAR LEXAN WINDSHIELDFLOOR & DRIVER COMPARTMENT FRONT FIREWALLROLL CAGE EXIT HANDLESHELMET HOOKSEAT BELT MOUNTSSEAT BELT HOOKSSHIFTER MOUNT FOR SPECIAL “FRAMEWORKS” SHIFTER (built only for ed Quay)FRONT THROTTLE CABLE MOUNT PLATE ON CHASSISSWITCH PANELROLLER BEARING STEERING COLUMN MOUNTSP & S TYPE STEERING BOX MOUNTALUMINUM DASH WITH TOP COVERDRIVER PROTECTION PLATE MOUNTSREAR MOTOR PLATE MOUNTFRONT WEIGHT BAR MOUNTFUEL PUMP & FILTER MOUNTING PLATEFUEL CELL MOUNTING PLATE ( 3 gal. Only– all other extra)PARACHUTE PACK MOUNTPARACHUTE ANCHOR MOUNTPARACHUTE RELEASE HANDLE MOUNT AND CABLE MOUNT TABMASTER DISCONNECT SWITCH MOUNT WITH LINKAGE MOUNTING TABBATTERY MOUNTIGNITION MOUNTING PLATEWELDED STUD FOR CHASSIS ELECTRICAL GROUNDREINFORCED BRAKE LINE SLOT IN BOTTOM RAILMOUNTING TAB FOR BRAKE LINE AT BACK OF BOTTOM RAILI. D. TAG WITH SERIAL NUMBER

$4995.00 F.O.B. POTTSTOWN, PA 19464

ANY CAR PICKED UP AT OUT FACTORY IN PENNSYLVANIA IS SUBJECT TO A 6% SALES TAX

BUILD IT AS YOUR BUDGET ALLOWS!

THIS PACKAGE INCLUDES EVERY MOUNT, THAT IS NEEDED, WELDED ONTO THE CHASSIS. ALL THE PARTS REQUIRED TO COMPLETE THEDRAGSTER ARE AVAILABLE FROM ed Quay RACE CARS. CALL AND ORDER WHAT YOU WANT, WHEN YOU WANT IT! WE SHIP IT TO YOUR DOOR,YOU BOLT IT ON. IT DOESN’T GET MUCH EASIER THAN THAT !

page•6


STAGE 2 PACKAGE PRICE INCLUDES:*

215” W.B. 4130 CHROMOLY CHASSIS - JIG FIT AND HELI-ARC (TIG) WELDED(includes front axle & support tubes)1 5/8” X .083 CAGE STD. (4 styles available - customer option @ no extra charge)STOCK TYPE 9” FORD REAR HOUSING WITH SYMMETRICAL ENDS STD.FILL, DRAIN & VENT IN REAR HOUSINGROLLOVER LEG PROTECTION TUBE (between top rails)LOWER RADIATOR MOUNTING TUBE4130 ENGINE LIMITERSFUEL PUMP & FILTER MOUNTING PLATESUPER STRONG LIGHT WEIGHT FIBERGLASS BODY (flip-up, 1 pc. Nose to driver compartment)FULL REAR BODY PANELS (fiberglass)BODY & BACK PANELS MOUNTED WITH PRO STYLE DZUS BUTTONSFIBERGLASS SEAT (21 3/4” shoulder width)CLEAR LEXAN WINDSHIELDFLOOR & DRIVER COMPARTMENT FRONT FIREWALLROLL CAGE EXIT HANDLESHELMET HOOKSEAT BELT MOUNTSSEAT BELT HOOKSSHIFTER MOUNT FOR SPECIAL “FRAMEWORKS” SHIFTER (build only for ed Quay)FRONT THROTTLE CABLE MOUNT ON CHASSISSWITCH PANELALUMINUM DASH WITH TOP COVERFRONT WEIGHT BAR MOUNTFUEL CELL MOUNTING PLATEPARACHUTE PACK MOUNTPARACHUTE ANCHOR MOUNTPARACHUTE RELEASE HANDLE & MOUNT WITH CABLE MOUNTING TABMASTER DISCONNECT SWITCH MOUNT WITH LINKAGE MOUNTING TABIGNITION MOUNTING PLATEWELDED STUD FOR CHASSIS ELECTRICAL GROUNDREINFORCED BRAKE LINE SLOT IN BOTTOM RAILMOUNTING TAB FOR BRAKE LINE AT BACK OF BOTTOM RAILI.D. TAG WITH SERIAL NUMBERBATTERY MOUNT

* BATTERY HOLD DOWN* FLOOR MOUNTED ADJUSTABLE THROTTLE PEDAL WITH FOOT RETURN HOOK & CABLE MOUNT* FLOOR MOUNTED ADJUSTABLE BRAKE PEDAL & MASTER CYLINDER MOUNT* POLISHED ALUMINUM STEERING WHEEL (no grips available)* ADJUSTABLE ROLLER BEARING STEERING COLUMN WITH SAFETY STOP* RACK & PINION STEERING BOX* TIE RODS* FRONT SPINDLES WITH STEERING ARMS* BRONZE BEARING MATERIAL BETWEEN STEERING BOSS& SPINDLE FOR EASIER STEERING* FULL SIZE DRIVER PROTECTION PLATE* CNC MACHINED REAR MOTOR PLATE (1/4” aluminum)* MSD COIL MOUNT ON REAR MOTOR PLATE* CNC MACHINED FRONT MOTOR PLATES ( 1/4” aluminum)* FRONT MOTOR PLATE MOUNTING SADDLES* STAINLESS STEEL FRONT MOTOR PLATE SADDLE MOUNT CLAMPS

*ADDITIONS TO STAGE 1 PACKAGE*ASSEMBLY REQUIRED


ANY CAR PICKED UP AT OUR FACTORY IN PENNSYLVANIA IS SUBJECT TO A 6% SALES TAX

page•7


STAGE 3 PACKAGE PRICE INCLUDES*

215” W.B. 4130 CHROMOLY CHASSIS - JIG FIT AND HELI-ARC (TIG) WELDED1 5/8” X .083 CAGE STD. (4 styles available - customer option @ no extra charge)STOCK TYPE 9” FORD REAR HOUSING WITH SYMMETRICAL ENDS STD.FILL, DRAIN & VENT IN REAR HOUSINGROLLOVER LEG PROTECTION TUBE (between top rails)LOWER RADIATOR MOUNTING TUBE4130 ENGINE LIMITERSFUEL PUMP & FILTER MOUNTING PLATESUPER STRONG LIGHT WEIGHT FIBERGLASS BODY (flip-up, 1 pc. Nose to driver compartment)FULL REAR BODY PANELS (fiberglass)BODY & BACK PANELS MOUNTED WITH PRO STYLE DZUS BUTTONSFIBERGLASS SEAT (21 3/4” shoulder width)CLEAR LEXAN WINDSHIELDFLOOR & DRIVER COMPARTMENT FRONT FIREWALLROLL CAGE EXIT HANDLESHELMET HOOKSEAT BELT MOUNTSSEAT BELT HOOKSSHIFTER MOUNT FOR SPECIAL “FRAMEWORKS” SHIFTER (build only for ed Quay)FRONT THROTTLE CABLE MOUNT ON CHASSISSWITCH PANELALUMINUM DASH WITH TOP COVERFRONT WEIGHT BAR MOUNTFUEL CELL MOUNTING PLATEPARACHUTE PACK MOUNTPARACHUTE ANCHOR MOUNTPARACHUTE RELEASE HANDLE & MOUNT WITH CABLE MOUNTING TABMASTER DISCONNECT SWITCH MOUNT WITH LINKAGE MOUNTING TABIGNITION MOUNTING PLATEWELDED STUD FOR CHASSIS ELECTRICAL GROUNDREINFORCED BRAKE LINE SLOT IN BOTTOM RAILMOUNTING TAB FOR BRAKE LINE AT BACK OF BOTTOM RAILI.D. TAG WITH SERIAL NUMBERBATTERY MOUNT

* BATTERY HOLD DOWN* FLOOR MOUNTED ADJUSTABLE THROTTLE PEDAL WITH FOOT RETURN HOOK & CABLE MOUNT* FLOOR MOUNTED ADJUSTABLE BRAKE PEDAL & MASTER CYLINDER MOUNT* POLISHED ALUMINUM STEERING WHEEL (no grips available)* ADJUSTABLE ROLLER BEARING STEERING COLUMN WITH SAFETY STOP* RACK & PINION STEERING BOX* TIE RODS* FRONT SPINDLES WITH STEERING ARMS* BRONZE BEARING MATERIAL BETWEEN STEERING BOSS& SPINDLE FOR EASIER STEERING* FULL SIZE DRIVER PROTECTION PLATE* CNC MACHINED REAR MOTOR PLATE (1/4” aluminum)* MSD COIL MOUNT ON REAR MOTOR PLATE* CNC MACHINED FRONT MOTOR PLATES ( 1/4” aluminum)* FRONT MOTOR PLATE MOUNTING SADDLES* STAINLESS STEEL FRONT MOTOR PLATE SADDLE MOUNT CLAMPS

* STRANGE 35 SPLINE AXLES, AXLE BEARINGS, 5/8” DRIVE STUDS* AEROSPACE REAR DISC BRAKES* BRAKE LINE (hard line thru bottom rail, flex line to calipers)* GRIFFIN ALUMINUM RADIATOR* ALUMINUM UPPER RADIATOR MOUNT* SUPER FAN ASSEMBLY (includes mounts welded to radiator)* 3 GAL. JAZ FUEL CELL WITH EXTENDED NECK, #6 VENT, #10 OUTLET* FUEL CELL GROUND STRAP* DEIST Q/R SEAT BELTS (customer choice of color)* DEIST PARACHUTE (12” quad with 7 X 7 pack) (customer choice of color)* MORSE THROTTLE CABLE, FEMALE ROD END, HARDWARE & QUICK RELEASE FRONT ADJ. MOUNT* PARACHUTE CABLE* ROLL BAR PADDING (customer choice of color)* START BUTTON* TOGGLE SWITCHES (3)* TRANS COOLER, MOUNT (includes mount for JAZ overflow tank) & BRAIDED LINE KIT (includes all fittings)* UPGRADE TO COLOR GRIP STEERING WHEEL (with ed Quay LOGO)

*ADDITIONS TO STAGE 2*ASSEMBLY REQUIRED



page•8

THE MAX-TRAC “BRACKETEER”4 LINK SUSPENSION DRAGSTER

STAGE 1 PRICE INCLUDES:*

225 W.B. 4130 CHROMOLY CHASSIS– JIG FIT & HELI-ARC (TIG) WELDED1 5/8” X .083 CAGE STD. (4 styles available - customer option @ no extra charge)ed Quay DESIGNED “MAX-TRAC” 4 LINK REAR SUSPENSION (includes 4130 rod ends & grade 8 hardware)SLIDING “A” FRAME HOUSING LOCATORed Quay DESIGNED TUBULAR ANTI-ROLL BAR SYSTEM (includes all rod ends & linkage)FABRICATED 9” FORD REAR HOUSING WITH SYMMETRICAL ENDS STD.FILL, DRAIN & VENT IN REAR HOUSINGROLLOVER LEG PROTECTION TUBE (between top rails)LOWER RADIATOR MOUNTING TUBEFUEL PUMP & FILTER MOUNTING PLATESUPER STRONG, LIGHT WEIGHT FLIP-UP FIBERGLASS BODY (1 pc. Nose to driver compartment)FULL REAR BODY PANELS (fiberglass)BODY & REAR PANELS MOUNTED WITH PRO STOCK STYLE DZUS BUTTONSFIBERGLASS SEAT (21 3/4” shoulder width)CLEAR LEXAN WINDSHIELDDRIVER COMPARTMENT FLOOR & FRONT FIREWALLROLL CAGE EXIT HANDLESHELMET HOOKSEAT BELT MOUNTSSEAT BELT HOOKSSHIFTER MOUNT FOR SPECIAL “FRAMEWORKS” SHIFTER (built only for ed Quay)ADJUSTABLE QUICK RELEASE FRONT THROTTLE CABLE MOUNT ON CHASSISSWITCH PANELALUMINUM DASH WITH TOP COVERFRONT WEIGHT BAR MOUNT4130 ENGINE LIMITERS (Chevrolet only - all other extra)FUEL CELL MOUNTING PLATE (3 gal. Only - all others cost extra)PARACHUTE PACK MOUNTPARACHUTE ANCHOR MOUNTPARACHUTE RELEASE HANDLE MOUNTMASTER DISCONNECT SWITCH MOUNT & LINKAGE MOUNTING TABBATTERY MOUNTING PLATEIGNITION MOUNTING PLATESTUD WELDED TO CHASSIS FOR ELECTRICAL GROUNDI.D. TAG WITH SERIAL NUMBER

*ASSEMBLY REQUIRED



page•9

THE MAX-TRAC “BRACKETEER"4 LINK SUSPENSION DRAGSTER

STAGE 2 PRICE INCLUDES*


* KONI ALUMINUM DOUBLE ADJUSTABLE REAR SHOCKS (PENSKE SHOCKS $600.00 ADDITIONAL)* LAMB REAR SPRINGS (rated to your combination)* TRANS MOUNT RING & SUPPORT TUBES* FLOOR MOUNTED ADJ. THROTTLE PEDAL W/ FOOT RETURN HOOK & CABLE MOUNT TAB* FLOOR MOUNTED ADJUSTABLE BRAKE PEDAL, MASTER CYLINDER ASSEMBLY & MOUNT* UPGRADE TO COLOR GRIP STEERING WHEEL (with ed Quay LOGO)* ADJUSTABLE ROLLER BEARING STEERING COLUMN WITH SAFETY STOP* RACK & STEERING BOX* TIE RODS (includes rod ends)* FRONT SPINDLES* BRONZE BEARINGS BETWEEN SPINDLES & SPINDLE BOSSES FOR EASIER STEERING* FULL SIZE DRIVER PROTECTION PLATE* CNC MACHINED REAR MOTOR PLATE (1/4” aluminum)* MSD COIL MOUNT ON REAR MOTOR PLATE* CNC MACHINED FRONT MOTOR PLATES (1/4” aluminum)* FRONT MOTOR PLATE MOUNTING SADDLES* STAINLESS STEEL FRONT MOTOR PLATE SADDLE CLAMP

*ADDITIONS TO STAGE 1 PACKAGE*ASSEMBLY REQUIRED


ANY CAR PICKED UP AT OUR FACTORY IN PENNSYLVANIA IS SUBJECT TO A 6% PA SALES TAX

page•10

THE MAX-TRAC “BRACKETEER”4 LINK SUSPENSION DRAGSTER

STAGE 3 PRICE INCLUDES*


*KONI ALUMINUM DOUBLE ADJUSTABLE REAR SHOCKS (PENSKE SHOCKS $600.00 ADDITIONAL)*LAMB REAR SPRINGS (rated to your combination)*TRANS MOUNT RING & SUPPORT TUBES*FLOOR MOUNTED ADJ. THROTTLE PEDAL W/ FOOT RETURN HOOK & CABLE MOUNT TAB*FLOOR MOUNTED ADJUSTABLE BRAKE PEDAL, MASTER CYLINDER ASSEMBLY & MOUNT*UPGRADE TO COLOR GRIP STEERING WHEEL (with ed Quay LOGO)*ADJUSTABLE ROLLER BEARING STEERING COLUMN WITH SAFETY STOP*RACK & STEERING BOX*TIE RODS (includes rod ends)*FRONT SPINDLES*BRONZE BEARINGS BETWEEN SPINDLES & SPINDLE BOSSES FOR EASIER STEERING*FULL SIZE DRIVER PROTECTION PLATE*CNC MACHINED REAR MOTOR PLATE (1/4” aluminum)*MSD COIL MOUNT ON REAR MOTOR PLATE*CNC MACHINED FRONT MOTOR PLATES (1/4” aluminum)*FRONT MOTOR PLATE MOUNTING SADDLES*STAINLESS STEEL FRONT MOTOR PLATE SADDLE CLAMP

* STRANGE 35 SPLINE AXLES, AXLE BEARINGS, 5/8” DRIVE STUDS* AEROSPACE REAR DISC BRAKES* BRAKE LINES (hard thru chassis, flex to calipers)* GRIFFIN ALUMINUM RADIATOR* ALUMINUM UPPER RADIATOR MOUNT* SUPER FAN ASSEMBLY (includes mounts welded to radiator)* 3 Gal. JAZ FUEL CELL WITH EXTENDED FILL NECK, #6 VENT, #10 OUTLET* FUEL CELL GROUND STRAP* DEIST Q/R SEAT BELTS (customer choice of colors)* DEIST PARACHUTE (12’ quad with 7” x 7” pack) customer choice of color* MORSE THROTTLE CABLE, FEMALE ROD END, ALL HARDWARE & QUICK RELEASE FRONT ADJUSTABLE MOUNT* PARACHUTE CABLE* ROLL BAR PADDING (customer choice of color)* WEATHER PROOF START BUTTON* TOGGLE SWITCHES (3)* TRANS COOLER, MOUNT (includes JAZ OVERFLOW TANK MOUNT) & PRE MADE - BRAIDED LINE KIT (includes all fittings)* MASTER DISCONNECT SWITCH & ON/OFF LINKAGE

*ADDITIONS TO STAGE 2 PACKAGE* ASSEMBLY REQUIRED

$12,995.00F.O.B. POTTSTOWN, PA 19464

ANY CAR PICKED UP AT OUR FACTORY IN PENNSYLVANIA IS SUBJECT TO A 6% PA SALES TAX

page•11

Bracketeer Dragster Options

POWDERCOAT CHASSIS...........................................................................................................

POWDERCOAT SUSPENSION ONLY........................................................................................rear housing, 4 link tubes, frame housing locator, linkage, trans cooler mount,

trans support ring, support tubes, anti-roll bar linkage

CHROME PACKAGE...................................................................................................................includes - front axles & support tubes, spindles, spindle arms, tire rods,roll cage (7.50 above), rear housing, 4 link tubes, frame housing locator slide tube,anti-roll bar & linkage, trans support ring , tubular links and trans cooler mount

PENSKE SHOCK ........................................................................................................................Mount for shock reservoirs includes billet clamps..........................................................As replacement for the standard KONI shocks in base package..................................

LAMB SPRINGS (pr) ...................................................................................................................

AXLES (35 spline includes bearings, bearings pressed on axles, studs, lug nuts , washers)

MARK WILLIAMS (35 or 40 spline)

STD. (p/n 50100) ...............................................................................................................STD. with lightening holes in flange...............................................................................Gun Drilled Standard (p/n 50100G).....................................................................................Super Lite Gun Drilled (p/n 50500).....................................................................................

STRANGE ENGINEERINGS/T Series - induction hardened (p/n P3506) ....................................................................Pro Series - thru hardened (p/n 1013)...............................................................................Pro Series - gun drilled (p/n 1014)............................................................................. .......40 Spline (Pro Series)......................................... Additional ..............................................

MOSER ENGINEERINGStandard ........................................................................................................................ .40 Spline ...................................................................................................... ...................Gun Drilled...........................................................Additional............................................Lightened Flanges.............................................. Additional ...........................................

REAR DISC BRAKE KITS(symmetrical or Olds/Pontiac ends - solid rotors, other may cost more)

LAMB................................................................................................................................MARK WILLIAMS ...........................................................................................................STRANGE ENGINEERING............................................................................................AEROSPACE ..................................................................................................................

MARK WILLIAMS HOUSING END BACKING PLATE BOLT KIT (includes washers, nuts)

3/8 dia. Set of 8...............................................................................................................1/2 dia. Set of 8 (Big Ford).................................................................................................3/8 dia. Set of 10 (Mopar Type)...........................................................................................

850.00

295.00

1500.00

1395.00124.95595.00

118.00

636.50658.50750.50783.75

364.90424.95522.40

50.00

399.95495.00

99.0029.00

774.95656.45555.00430.00

21.0039.2026.25

$

$

$

$$$

$

$$$$

$$$$

$$$$

$$$$

$$$

page•12

3rd MEMBERSMARK WILLIAMS (3 qts. Gear oil & carrying case included)

P/N 57010 - Top Dragster Assembly ........................................................................................Includes - bolt thru aluminum case (3.812 bore), steel spool (40 spline) pinion coupler, ball bearing pinion support, coupler, 3:20 to 4:86 ratio - large pinion, Richmond 9310Pro Gears (58 lbs.)

P/N 57012 - SUPER LITE ECONO/COMP ASSEMBLY ..........................................................Includes - lite weight aluminum case, aluminum spool (35 spline), lightened ring gear, ball bearing pinion support, coupler, any RICHMOND 8620 gear set. (49 lbs.)

M/W BRACKETEER SPECIAL ASSEMBL................................................................................Includes lite weight aluminum case, spool (35 spline), any RICHMOND gear set

*FOR 4 LINK DRAGSTER APPLICATIONS DELETE COUPLER #40300 FROM ABOVE3RD MEMBERS AND SUBSTITUTE 1350 “U” JOINT YOKE ..................................................

STRANGE ENGINEERING

P/N P2051 ................................................................................................................................Includes aluminum case with billet aluminum caps, lite weight spool, N-1922 forgedaluminum pinion support, 3:89 to 4:56 ratio U.S. STRANGE competition (large pinion)

gear set and chromoly coupler

P/N P2052 ................................................................................................................................same as P/N P2051 except with 1350 “U” Joint instead of coupler

P/N P2053..................................................................................................................................Includes aluminum case with billet aluminum caps, lite weight spool, N-1922forged alum.pinion support, 3:50 to 6:50 U.S. STRANGE standard gear set and chromolycoupler

P/N P2054 .................................................................................................................................Same as P/N P2053 except with 1350 “U” joint instead of couplerFor 40 spline axles use #P2047.......................................... $85.00 more...................

DRIVESHAFTS

MARK WILLIAMS (includes front yoke & ”U”; bolt kit)

#39600 - Mild Steel.......................................................................................................#39800 - 4130 Chromoly .............................................................................................#39900 - Aluminum.......................................................................................................

ed Quay RACE CARSMild Steel (Includes front yoke & “U” bolt kit) ..........................................................................

MARK WILLIAMS OR STRANGE ENGINEERING COUPLERFEMAL FOR POWERGLIDE .......................................................................................SPICER YOKE..............................................................................................................

*1808.80

*1560.85

1440.00

77.60

1247.29

1277.85

1129.99

1159.84

1245.00

409.50476.00593.75

350.00

78.00

75.00

$

$

$

$

$

$

$

$

$

$$$

$

$

$

page•13

JAZ FUEL CELL3 GAL. WITH LONG FILL NECK...................................................................................4 GAL. (REQUIRES SPECIAL MOUNT AND OFF SET DRIVE PROTECTION PLATE ..........SPECIAL MOUNT & OFFSET DRIVER PROTECTION PLATE (FOR 4 GAL.) ...............

GROUND STRAP (fuel cell to driver protection plate) .............................................................

GRIFFIN ALUMINUM RADIATOR ..............................................................................................Top radiator mount (aluminum) ..........................................................................................

FAN ASSEMBLIESFor Alcohol....................................................................................................................For Gasoline (this one actually lowers temp. when turned on)....................................................Mounting tabs - fan to radiator.......................................................................................

B & M SUPER TRANS COOLER (P/N 7026600).............................................................................Trans cooler mount (includes mount for JAZ overflow tank)...................................................................Trans cooler Braided Line Kit (includes all fittings)............................................................................Buy all 3 above items & save $10.00..........................................................................................

JAZ Overflow Tank ......................................................................................................................Recovery Tank..............................................................................................................................Vibration Isolater Kit (cooler to mount)..............................................................................................

ed Quay / FRAMEWORKS SHIFTER(Custom design - only available thru ed Quay)...........................................................................................

Shifter Cable (custom length for the above shifter)................................................................................Custom Cable Mount at Trans.....................................................................................................Quick Release Connector at Trans. Shift Arm (5/16”)...................................................................DeLong Cable Clamp Mount at Shifter$ 10.95.3/16” Female Rod End & hardware (to mount cable to shifter handle).................................................Buy 5 items from above as a “Kit” & save $7.85........................................................................

ADVANCED CONTROL DEVICES PRODUCTS

Neutral safety switch kit................................................................................................................Air Shifter Kit(includes electronics, mounting hardware, regulator, 10 oz. CO2 bottle, shifter bracket and solenoid cylinder) .........Line Kit (for shifter only)...............................................................................................................Dual Line Kit (throttle control & shifter)................................................................................................"90” Throttle Control.....................................................................................................................Bottle Mounts................................................................................................................................“Billet” Aluminum Bottle Mounts...................................................................................................

GOZA 3” SCOOP PAN.................................................................................................................GOZA 4150 Mounting Kit.............................................................................................................GOZA 4500 Mounting Kit.............................................................................................................GOZA “BILLET” Throttle Stop Arm...............................................................................................GOZA “BILLET” 90 DEGREE MORSE BRACKET......................................................................4150 ADAPTER PLATE...............................................................................................................SCOOP DZUS Button Kit.............................................................................................................

135.95144.95

55.0018.00

350.0055.00

87.50190.00

35.00

85.0055.00

109.00239.00

22.0052.00

9.95

175.00

40.0036.0029.95

7.95117.00

31.45

399.9511.0014.00

174.9535.9580.00

154.9574.9574.9555.0032.0035.0020.00

$$$$

$$

$$$

$$$$

$$$

$

$$$

$$

$

$$$$$$

$$$$$$$

page•14

3 DIGIT PRO DIAL Board............................................................................................................REVERSABLE PRO DIAL Board Mount.....................................................................................Buy pro dial & mount as a kit and save $4.05............................................................................

DEIST SAFETY EQUIPMENT

Q/R Seat Belts (compact)...............................................................................................................12” Super Quad Parachute (7 x 7 pack).........................................................................................Parachute Cable...........................................................................................................................ROLL BAR PADDING (Black)........................................................................................................SFI................................................................................................................................................SEAT PADCloth.............................................................................................................................................Vinyl .............................................................................................................................................ed Quay Dragster Altenator Kit(featuring an EAST COAST AUTO ELECTRIC 74 AMP alternator, adj. mount,crank pulley & belt)..............................

W/Large Billet Pulley....................................................................................................................

ed Quay “Billet” ALUMINUM LED TAIL LIGHT ASSEMBLY (1/10 amp draw)..................................

TOW HOOKWeld In..........................................................................................................................................Flip Down (comes out under nose when needed)...................................................................................................

Flip Up (flips up thru nose when needed)..................................................................................................................

NOSE - SHARK FIN (to break the finish line lights the same every time)............................................................

REMOVABLE NOSE....................................................................................................................

STEERING WHEEL- Polished Aluminum with ed Quay logo grips (available in red, black, blue gold & clear)................................................................................................Installation.....................................................................................................................................

MW STEERING WHEEL QUICK DISCONNECT........................................................................

GLOVE BOX (hinged aluminum construction w/ Dzus faster closure)........................................................w/ aircraft latch.............................................................................................................................

ed Quay CHASSIS MOUNTABLE AIR COMPRESSOR KITIncludes pump, straight line kit from pump to canister, line storage canister.............................mounted to your chassis..............................................................................................................

ed Quay HEADERS (up or down, all makes) 3/8” thick mounting flange makes these virtuallyleak proof and the 18 ga. Tubing assures long life..................................... Starting at...............

Coating of Headers (inside & out)....................................................................................................

RAPTOR RACING SILENCERS (mufflers- pair)

Stainless steel construction, includes VAC-U-PAN fitting............................................................

DASH PANELPlain (no cut outs).............................................................................................................................Cut for 4 gauges with hole for low oil pressure light....................................................................Mount your Delay Box.................................................................................Starts at....................

39.9554.9589.90

177.00215.00

29.9545.0060.00

97.5082.50

289.95320.00

59.99

39.95115.00195.00

75.00

250.00

82.9515.00

74.00

65.00120.00

349.00110.00

575.00

245.00

499.00

60.0095.0030.00

$$$

$$$$$

$$

$$

$

$$$$

$

$$

$

$$

$$

$

$

$

$$$

page•15

BATTERY CABLE KIT (dragster)

-includes all the cable & fittings needed to connect the battery to the master disconnect switchand then to the starter (battery, master disconnect switch & starter not included)

SINGLE Battery............................................................................................................................DUAL Battery...............................................................................................................................BATTERY CHARGING PLUG Kit (small & light weight)....................................................................Mount to car.................................................................................................................................

GOODYEAR Tires......................................................................................................................HOOSIER Tires.........................................................................................................................CNC MACHINED REAR MOTOR PLATE(1/4” aluminum with mount for MSD coil).................................................................................................CNC MACHINED FRONT MOTOR PLATES—pair (1/4” aluminum)..............................................Buy front and rear plates as a set & save $10.00.......................................................................

ABOVE PRICES FOR CHEVROLET ONLY -ALL OTHERS PRICED HIGHERFRONT MOTOR PLATE SADDLES............................................................... (each)....................

SWING MOUNTED ADJUSTABLE PEDAL ASSEMBLYIncludes TILTON master cylinder and heel stops.……................................................................

STAINLESS STEEL CLAMP (each-for front motor plate mounts).........................................................

all prices and listings subject to change without notice

54.9667.9552.9525.00

10% off list10% off list

84.9544.95

119.00

19.95

295.00

7.95

$$$$

$$$

$

$

$

Documents

Bracketeer Dragster Story - ed Quayedquay.com/dragsters/Bracketeer.pdf · 2006-09-08 · Bracketeer Dragster Story Ed Quay started building dragsters in 1989 as another segment of