BQ Building

8/3/2019 BQ Building

http://slidepdf.com/reader/full/bq-building 1/4

Item Description Unit Quantity Rate Amount

ELEMENT: FRAME

INDUSTRIALISED BUILDING SYSTEM (IBS)

Notes

A NO

B NO

To Collection

The tenderer shall be deemed to have studies thedrawing/specification and visited the site to determine for himself the

extent and/or nature of pre-casting, transportation, double handling,

hoisting, housting equipments, fixing, etc. Claims will not be

entertained on the ground of ignorance of extent and/or nature of such

works as he is deemed to be fully acquanted and conversant with all

Supply, deliver, assemble, hoisting and install ….mm x ….mm x

….mm pre-stressed beams; fair finished to all surfaces

Rates to include for casting in conduits forming chases, opening, etc.

for Mechanical and Electrical installation. It is the Tenderer's

responsibility to check the extent of this work from the Mechanical and

Supply, deliver, assemble, hoisting and install ….mm x ….mm x

….mm pre-stressed roof beams; fair finished to all surfaces

Precast concrete; design and cast in panels size including all

necessary levelling, proping cutting of the lifting loops all accordance

to S.O approval, all as per manufacturer's detail and all as per

If the opinion of the tenderer, the precast items may be cast into

smaller/gigger units, he should forst seek clarification and approval

from the S.O. All costs in connection with any amendments to the

The tenderer shall note that all unplastered surfaces to precast

concrete shall be finished smooth. He shall allow for this in his pricesaccordingly.

Cawangan Kontrak Ukur Bahan,

Ibu Pejabat JKR Malaysia.




ELEMENT: INTERNAL WALL


Notes

NO

M2

M2

M2

M2

To Collection

The tenderer shall be deemed to have studies the

drawing/specification and visited the site to determine for himself the








precast items shall be borne by the tenderer.




Electrical drawings.

Prepare and apply approved skim coating to the vertical surfaces of

the precast concrete wall cladding panel all in accordance with

manufacturer's instructions and to the approval of the S.O.

Approved individually supported precast concrete wall cladding panel

designed either to span column to column or floor to floor with

minimum Grade 35 concrete and minimum cement content of

350kg/m3

including all the necessary moulds, reinforcement bars,

links,complete with appropriate jointing system at all sides of the panel

and all the necessary ancillary components to Manufacturer's

Compressible waterproof strips to the horizontal joints between top

precast concrete wall cladding panel and the bottom precast concrete

wall cladding panel, sufficiently lapped where necessary all in

accordance with the Manufacturer's Instruction and to the approval of

S.O.

Prepare and apply approved water proofing membrane to the vertical

joints of the precast concrete wall cladding panel, including sufficient

lapping where necessary all in accordance with manufacturer's

instructions and to the approval of the S.O.

Supply, handle, transport, assemble, hoisting and install ….mm x….mm x …mm precast concrete wall cladding panel as described.

Prepare and apply approved water proofing membrane to the

horizontal joints of the precast concrete wall cladding panel with the

floor slabs, including sufficient lapping when necessary all in

accordance with manufacturer's instructions and to the approval of the


concrete shall be finished smooth. He shall allow for this in his prices

accordingly.






ELEMENT: UPPER FLOOR


Notes

A

M2

B

M2

C

M2

D

M2

E

Item

To Collection

Allow for providing all necessary equipments, plants, tools and other

ancillary materials needed to perform leakage test on the floor and the

subsequent removal of the same from the site.

The tenderer shall be deemed to have studies the

drawing/specification and visited the site to determine for himself the













Approved precast concrete slabs of types either half slab, hollow core

floor slabs or double tee slabs designed to Class II with minimum

Grade 35 concrete and minimum cement content of 350kg/m3

including all the necessary moulds, reinforcement bars, links, pre-

stressing wires, strands or cable, complete with appropriate jointing

system at the end of the slabs and all the necessary components to

Manufacturer's Instructions.

Layer of steel fabric reinforcement to B.S. 4483 (BRC Ref. No. A8 -

weighing not less than 3.95kg/m2) as described well lapped at joints

and embedded in 75mm thick reinforced concrete Grade 35

(measured separately).

Prepare and apply approved water proofing membrane to the

suspended precast concrete floors, all in accordance with

manufacturer's instructions and to the approval of the S.O

75mm thick reinforced concrete grade 35 with minimum cement

content of 350kg/m3

as described on suspended floor slab

Supply, handle, transport, assemble, hoisting and install precast

concrete floor slabs as described.


concrete shall be finished smooth. He shall allow for this in his prices

accordingly.






ELEMENT: STAIRCASE


Notes

A Item

To Collection

Supply, handle, transport, assemble, hoisting and install precast

concrete staircases floor slabs as described.

The tenderer shall be deemed to have studies thedrawing/specification and visited the site to determine for himself the













Approved precast concrete staircase complete with relevant landings,

with minimum Grade 35 concrete and minimum cement content of

350kg/m3

including all the necessary moulds, reinforcement bars,

links, pre-stressing wires, strands or cable, complete with appropriate

jointing system at the end of the staircase and all the necessary

ancillary staircase components to Manufacturer's Instructions.


concrete shall be finished smooth. He shall allow for this in his pricesaccordingly.



Documents

BQ Building