Upload
pukymotto
View
219
Download
0
Embed Size (px)
Citation preview
8/13/2019 _box_fan__
1/5
8/13/2019 _box_fan__
2/5
GRILLE 1
emoveSCREW A 2x
emoveLOCK PLATE 2
ORNAMENTAL
PLATE 3
emoveGRILLE 1
emoveSCREW B 3x
FAN BLADE 5
emoveGRILLE 1
emoveFAN CAP 4
LOUVRE BUTTON 6
SELECT. SWITCH
KNOB 8
THERMOSTAT
KNOB 10
o replace knobs
HEATING ELEMENT 13
MOTOR 14
emoveBUTTON LOUVRE
SWITCH 6
emoveKNOB SELECTOR
SWITCH 8
emoveKNOB
THERMOSTAT 10
emoveGRILLE 1
emoveFAN BLADE 5
emoveSCREW C (8x)
emoveREAR HOUSING
102
emoveSCREW F (4x)
emoveMOTOR MOUNT
103
emoveSCREW E (6x)emoveSCREW G 4x
emove / unsolder wires
LOUVRE SWITCH 7
SELECTOR SWITCH 9
THERMOSTAT 11
CORDSET 24
PILOT LIGHT + CAP 12
LOUVRE MOTOR 17
GEARWHEEL +
WASHERS 18
CAPACITORS 15 + 16
removeBUTTON LOUVRE
SWITCH 6
removeKNOB SELECTOR
SWITCH 8
removeKNOB
THERMOSTAT 10
removeGRILLE 1
removeSCEW C (8x)
removeREAR HOUSING 102
SAFETY SWITCH 19
BUTTON SAFETY
SWITCH 20
removeRUBBER FEET 24
removeSCREW H (4x)
removeBOTTOM PLATE
105
remove / unsolder wiring
DISASSEMBLY ADVICE PARTS LIST
Pos. Description Service Code
1
2
3
4
5
Grille
Lock plate
Ornamental plate
Fan cap
Fan blade
4822 458 10606
4822 466 11649
4822 466 11651
4822 462 10962
4822 515 10063
6
7
8
9
10
Button louvre switch
Louvre switch + item 106
Knob selector switch
Selector switch + item 107
Knob thermostat
4822 410 11427
4822 310 11065
4822 410 11437
4822 310 11066
4822 410 11428
11
12
13
14
15
Thermostat + item 108
Pilot light + cap
Heating element
Motor 220-240 V
Capacitor 1.5F 400 V (1x)
4822 310 11067
4822 310 11068
4822 259 10284
4822 361 11023
4822 121 10698
16
17
18
19
20
Capacitor 1.0F 400 V (5x)
Louvre motor 240 V / 50 Hz
Gearwheel + 2 washers
Safety switch
Button safety switch
4822 121 10699
4822 361 11022
4822 310 11069
4822 276 13707
4822 410 11429
21
22
23
24
25
Fixing nut louvre grille
Louvre grille + bearing bush
Rubber foot (4x)
Cord set EURO
Thermal cut out (2x)
4822 505 11248
4822 310 11071
4822 462 10989
4822 321 11363
4822 252 11282
IMPORTANT
* Cord set.
Due to the high wattage of the fan heater, only the
specified cord set must be used.
* In some cases the connection points between wiring and
electrical components have been insulated.
After replacement of a component, make sure that the
electrical insolation of the connection points has been
restored by fitting the regular sleeve.
If the regular sleeve cannot be used anymore, replace it
with a new one or use insulating tape, taking care a proper
and safe insulation is realized.
* After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as laid down and offically established at
this moment.
* Parts, with numbers from 100 and higher, cannot be
ordered separately
Possible complaints :
1) The heater doesnt function.
Action: Set the thermostat knob to the highest position
2) The overheating device has been activated.
Action: To reset the overheating device, remove the mains plug
from the wall socket and let the heater cool down for 30 minutes.
PCS 88 819
8/13/2019 _box_fan__
3/5
8/13/2019 _box_fan__
4/5
8/13/2019 _box_fan__
5/5
1F
1F 1.5F
1F
1F 1F
FanmotorOscillatormotor
Pilotlamp
E
Cut outSafetyswitch
2
3
4
5
6
1
F
Ther-mostat
Cut out
MODE POSITION SWITCH CONNECTION
HOT
COOL
1100 W
2200 W
1
2
3
E - 1 F - 3
E - 1 F - 2 - 3
- F - 2 - 3 - 6
- F - 2 - 3 - 4 - 6
- F - 2 - 3 - 4 - 5 - 6
PCS 88 821