Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
*******************************************
Belvedere*******************************************
*******************************************
??? - For what brand of bowl do you need parts ???Find out by looking on the bottom of the bowl, between the front and strainer,
where molded in the bottom is the brand and model number. For example, "Marble Products #10"
Notice to Plumbers:The OD diameter of the treads at the
point that this fixture goes through the shampoo bowl is 1-1/8 inch
622c Fixtureby Belvedere
Can be used also to replace the #112 two handle fixture that came with Belvedere Shampoo Bowls for years prior to 1990.
The # 112 fixture is discontinued but we have most parts available as seen below.
Note:If you are replacing a 2-handle fixture with the 622c, then you may want to purchase the Cover Plate below to
Page 1Fixtures - Parts - Accessories to shampoo bowls
******************************************
*******************************************
Handle for Belvedere #622c Single Lever Fixture
* Handle Only * * Replacement Handle for Belvedere # 622TC Single Handle
Fixture * Crystal Clear Plastic Handle
* "Tear Drop Shape" when looking down from top * Includes: Handle Cover, Handle Screw, Handle Washer and
Handle
Flo-Temp Cover Plateby Belvedere
Use with #622c and #528 Fixture
Includes:1- Cover Plate1- Gasket1- Mounting Bracket2- Screws
Place the Flo-Temp cover plate and gasket over the 2 left-hand holes in the bowl fixture deck.
Then attach the mounting bracket on the bottom side of the bowl with the 2 mounting screws
included.
Page 2Fixtures - Parts - Accessories to shampoo bowls
*******************************************
*******************************************
522 Fixtureby Belvedere
Deck Mount Fixture
! Chrome
! Single Handle Control
! Replacement Cartridge sold below
Will NOT fit older Belvedere Bowls, Please See the #622c (sold above) as a replacement fixture.
May Need Cover Plate for 2 of the 3 Holes in Bowl(Sold Above)
Page 3Fixtures - Parts - Accessories to shampoo bowls
622c Cartridgeby Belvedere
The only replacement part for the 622c Fixture
comes with clip as shown
*******************************************
*******************************************
528 Fixture with Spoutby Belvedere
Replaces the Discontinued #4228P Spout Fixture
Deck Mount Fixture
! Fits Belvedere Bowls.
! NEW! Deck Mount Fixture By BELVEDERE, Chrome, Single Handle Control with Diverter Spout * Fits Belvedere Bowls. * May Need Cover Plate for 2 of the 3 Holes in Bowl * Sold Separately above. * This Fixture Replaces the Discontinued 2 handle with Diverter Spout # 4228P Fixture
Page 4Fixtures - Parts - Accessories to shampoo bowls
*******************************************
by Belvedere# 403
Fits Only Belvedere Bowls
This is a one way valve that saves the integrity of the fresh water system by NOT
allowing contaminate water (water contaminated with perm solution,
neutralizer, hair color, etc.) from mixing with the fresh water system that we drink.
Material: Plastic Plumbing Code: ASSE #1001
Consult your local plumber and building codes for need of this product.
Vacuum Breaker * ONLYby Belvedere
# 403
Fits ONLY Belvedere Bowls
Includes: Vacuum Breaker only
* Material: Plastic * Plumbing Code ASSE # 1001
* Shampoo Hose is sold separately.
This is a one way valve that saves the integrity of the fresh water system by not allowing contaminate water( water contaminated with perm solution, neutralizer,hair color and etc.) from mixing with the fresh water
system that we all drink.
Consult your local plumber and building codes for need of this product.
Page 5Fixtures - Parts - Accessories to shampoo bowls
Vacuum Breaker
*******************************************
*******************************************
by Belvedere* Fits Belvedere Shampoo Bowls
* Vacuum Breaker Shampoo Hose Receiver * Has 2 - 1/2" holes to the Left of the Hose Opening to
accommodate Belvedere Vacuum Breaker's #403 or #503
* Complete with Clamp (Steel square and 4 screws) and Gasket* Chrome (Plastic)
* Dimension of Receiver 2-7/8" x 2-5/8"
LA, CA Vacuum Breaker #503Cby Belvedere
This vacuum breaker is a MUST for areas below: Oregon state, Wisconsin State, and Los Angeles County, CA
Includes: #503 Vacuum Breaker, Hose Receiver, and Hose fromFixture to Breaker
* ASSE 1014 Approved * Dimension of Receiver 2-7/8" x 2-5/8"
* Shampoo Hose is sold separately.
This is a one way valve that saves the integrity of the fresh water system by Not allowing contaminate water ( water
contaminated with perm solution, neutralizer, hair color and etc.) from mixing with the fresh water system that we all drink.
Consult your local plumber and building codes for need of this product.
* Replaces #404 Vacuum Breaker *
Page 6Fixtures - Parts - Accessories to shampoo bowls
Hose Receiver Kit for Vacuum Breaker
*******************************************
* Plain Shampoo Hose Receiver * NOT for Vacuum Breaker* Fits Belvedere Shampoo Bowls Only
* Complete with Clamp (Steel square and 4 screws) and Gasket* Chrome (Plastic)
* Dimension of Receiver 2-7/8" x 2-5/8"
Whiz Spray Hoseby Belvedere
screws on to fixture
Length: 42 inches
Page 7Fixtures - Parts - Accessories to shampoo bowls
Hose Receiver Kit * Plainby Belvedere
*******************************************
*******************************************
*******************************************
*******************************************
by BelvedereFits # 112 Fixture
package contains: 2-brass seats
*** No Longer Available ***
Gland Assembliesby Belvedere
Fits # 112 Fixture
package contains: 1-hot and 1-cold Gland Assemblies
Complete Strainer Assemblyby Belvedere
3-1/2"
The smaller 1-1/2" strainer assembly has been discontinued.
Package includes strainer cup ( 1 ) and items ( 2 ) thru ( 8 ) asshown in illustration.
Strainerby Belvedere
3-1/2"
Plastic strainer cup only
Page 8Fixtures - Parts - Accessories to shampoo bowls
Seats
*******************************************
*******************************************
Shampoo Bowl Bracketby Belvedere
Fits Belvedere Bowls (Acrylic/ABS Plastic Bowls)
Package contains: Upper Metal Bracket and Lower Metal Bracket
usually mounted with 4 wood screws (not included)
Shampoo Bowl Bracket * Fits Acrylic/ABS Bowls
Shampoo Bowl Mounting BracketFits: Marble Bowls
Triangle Shape Metal Mounting Bracket Fits: Marble Products Man made Marble Bowls
Has two taps turned out on top with holes to bolt into bottom of Shampoo Bowl
Package contains: Metal Bracket and 1-Camber Bolt
usually mounted to wall with 4 wood screws ( not included )
Fits: Marble Products Model # 100, 200, 2000, 3000W and 4000 Marble Shampoo Bowls
Marble Shampoo Bowl Mounting Bracket
Page 9Fixtures - Parts - Accessories to shampoo bowls
Mounting BracketFits most Belvedere Bowls
(#3800, 3100, 8000, 8100, 8200, 9000, & 1980W) &
Marble Products Fiber Glass Bowls #10 and #30
Bracket has 2 slots to accommodate 2-tongues on Back of Bowl that is Parallel to Wall. Tongues are 9" Center
Package contains: Metal Bracket and 1-Camber Bolt usually mounted with 4 wood screws ( not included )
Note: #3100 bowl needs shorter leveling bolt which is not included, but may be
********************************************************************
Koken / Takara Belmont Products********************************************************************
This Bracket fits the shampoo bowl above.
* Steel tube that has 2 - tubes that come from back of bowl that fit under side lip of bowl, V - Shape in back with 3 - Holes to mount to wall
with screws (screws Not included) * Fits Only Koken Gypsy Bowl
* Note Gypsy bowl is a all thin plastic bowl
Koken Gypsy Bowl Mounting Bracket
Koken / Takara BelmontFixture
# 700 " Two Handle " Hot-Cold
Fits all older Belvedere & KOKEN Bowls
Replaces the Belvedere #112 fixture that is no longer made.
Chrome ( Solid Brass Workings )
Shampoo hoses sold separately on this page.
3!" centers
Koken / Takara Belmont #700 Two Handle Fixture Chrome
Koken / Takara Belmont #900 same as above except Brass Plated Outside
Page 10Fixtures - Parts - Accessories to shampoo bowls
Koken Gypsy Bowl BracketFits: Koken Gypsy Bowls( Picture on the left)
*******************************************
*******************************************
Fixture/Part Handles (Set) Fits #700* Fits Koken 2 - Handle Fixture
* Fits # 700 Fixture * Crystal Clear Plastic Handles ( Hot and Cold )
* Includes Handles, Plastic Caps ( Hot and Cold ) and Screws
#550N Koken Single Lever Fixtureby Belmont
Single Lever Fixture
Fits Koken and Marble Shampoo Bowls.
Note: Fixture Opening in Bowl must be a Minimumof 1-3/4" and a Maximum of 2" to accommodate
this fixture.
Page 11Fixtures - Parts - Accessories to shampoo bowls
******************************************
******************************************
# 500 Fixture
The most advanced single control faucet made. Pull up for exact pressure desired. Dial the temperature you like, left for Hot, right for Cold. Turn water on or off without resetting. The
#500 "Dial-Flo" has only one moving part.
* Fits Marble, MPC & Koken Shampoo Bowls
Note: Fixture Opening in Bowl must be a Minimumof 1-3/4" and a Maximum of 2" to accommodate
this fixture.
Handle for Dial Flo #500 Fixture * Handle Only * Before June 2005
* Fits: Marble 500 "Dial-Flo" Single Handle Fixture made before June 2005
* Color: Crystal Clear * Shape: Round Sides with Flat on top & Flat on Bottom * Fastens on to fixture with Screw (included) under Cap
(button) * Fits Fixture made before June 2005 * Has 9 ridges where it fits onto stem
Page 12Fixtures - Parts - Accessories to shampoo bowls
*******************************************
Marble Products*******************************************
******************************************
******************************************
* Plug Button "top to cover screw" * Crystal Clear Plastic
* Fits #500 "Dial-Flo Faucet Handle
Fixture Dial Flo #550 Fixture * Handle Only *
After June 2005Handle with Cap (button) and screw Only
* Fits: Marble 550 "Dial-Flo" Single Handle Fixture * Color: Crystal Clear
* Shape: Round Sides with Flat on top & Flat on Bottom * Fastens on to fixture with Screw (included) under Cap
(button) * When looking into the bottom of handle where the handle
fastens onto the fixture it is "DIAMOND SHAPE" * Fits Fixture made After June 2005
* This Fixture is turned on by pushing the handle backwards and off by pulling handle forward * Fits "DIAMOND SHAPE" stem
Fixture Dial Flo Handle Cap * Only* Plug Button "top to cover screw"
* Crystal Clear Plastic * Fits #550 "Dial-Flo Faucet Handle
* Has "M P C" printed on button
Page 13Fixtures - Parts - Accessories to shampoo bowls
Fixture Dial Flo * Plug Button Only
******************************************
******************************************
******************************************
Fixture Dial Flo Cam (Stem) Only * Before June 2005
* Fits: Marble 500 "Dial-Flo" Single Handle Fixture made before June 2005
* Color: Gray Plastic * Shape: 3/8" Round x 3-1/4" long with groves on one End for
Handle & Tapered on Bottom End * Fits Fixture made before June 2005 * Has 8 ridges where it fits onto stem
Sold With Fixture Cartridge Kit Below
Fixture Cartridge Kit & Dial Flo Cam (Stem)
* Fits Marble #500 Dial-Flo Fixture
* "Leaky Faucet" this kit will replace the wore parts in the #500 "Dial-Flo" Faucet by Marble Products Co.
* Fits "Pull Up" to turn on water Fixture ( #500 fixture) * Includes: Cam (Stem), Sleeve, Cartridge and Gasket
Marble Cartridge Kit & Dial Flo Cam (Stem) for #500 Fixture
Fixture Cartridge Kit * Fits #550 Fixture
Fits #550 DIAL-FLO FAUCET BY Koken / MARBLE PRODUCTS CO
* "Leaky Faucet" this kit will replace the wore parts in the * Fits Push back to turn on & Pull forward to shut off Fixture
* Number printed on side of part "FL02GJ"
Page 14Fixtures - Parts - Accessories to shampoo bowls
******************************************
*******************************************
** Note Blue Cartridge is NO Longer Available originally this fixture was made and sold with a BLUE color
cartridge That fixture has been Discontinued because it was found to
be too tight, it was hard to turn on and off. If you have a fixture with a blue cartridge you will need to buy
a NEW FIXTURE.
*** The Green Cartridge shown here will NOT fit your Blue Cartridge Fixture ***
#400 Diverter Faucet Spout* For use with #500 "Dial-Flo" or the Newer #550 Dial-Flo
single lever faucet and MPC # 1735 "Soft-Flo" Shampoo Hose Spray.
* Faucet has 4-1/2" Swivel Spout with manual diverter knob.* Pull up to divert water through spray hose, push down to
redirect through spout. * Diverter Faucet Spout ONLY comes with hose to connect to
faucet
* Note: Opening in bowl must be a minimum of 1-5/16" and a maximum of
1-7/16" to accommodate this fixture.
Vacuum BreakerFITS: Marble # 10 Bowl & Collins Concept Bowl
Includes: Vacuum Breaker, Hose Receiver, and Hose to Fixtureto Breaker
* Dimension of Receiver 3-1/4" x 2-3/4"
This is a one way valve that saves the integrity of the fresh water system by NOT allowing contaminate water (water
contaminated with perm solution, neutralizer, hair color, etc.) from mixing with the fresh water system that we drink.
National Plumbing Code Number: ASSE 1001
Consult your local plumber and building codes for need of this product.
Page 15Fixtures - Parts - Accessories to shampoo bowls
******************************************
******************************************
******************************************
******************************************
Marble Products Hose Receiver Kit for Marble Vacuum Breaker
FITS: All Marble Product Shampoo Bowls & Collins Concept Bowl
* Has 2 - 1/2" Holes just left of the hose to mount vacuum breaker
* Fastens to shampoo bowl with steel bar with bolt & thumb nut included
* Also included rubber gasket for receiver and vacuum breaker
* Dimension of Receiver 3-1/4" x 2-3/4" * Material: CHROME PLASTIC
* Color: Chrome
Marble Products Los Angeles Vacuum Breaker
Includes: Los Angeles Vacuum Breaker Hose Receiver and 22" Hose from Fixture to Breaker
* Dimension of Receiver: 3-1/4" x 2-3/4"
* TO BE USED FOR Los Angeles, California
Marble Los Angeles Vacuum Breaker
Fixture Repair Kit Fits Marble Vacuum Breaker
Marble Fixture Repair Kit fits marble Vacuum Breaker
* Includes: Black O-Ring and White Plastic Valve with Red Rubber Washer
Page 16Fixtures - Parts - Accessories to shampoo bowls
*******************************************
*******************************************
Connecting Hose for Marble Vacuum Breaker
This is the HOSE that connects the Vacuum Breaker to the Fixture
The length is about 24" long with female couplings on each end
The hose is 3/8" inside diameter (ID) 250 PSI
Soft-Flo Shampoo Hoseby Marble Products
Screws on to Fixture
Length: 42 inches
" Catch-All "
Hair TrapModel #1701
! Prevents hair from clogging the shampoo bowl drain.
! Fits existing brand or model of shampoo bowl drain.
Page 17Fixtures - Parts - Accessories to shampoo bowls
Shampoo Bowl Hole Cover Fits: Marble Bowls
Hole Cover Chrome Cover plate with rubber seal washer and bottom
washer with wing nut fastener. Fits: Marble Products Man made Marble and Fiberglass
Shampoo Bowls
Page 18Fixtures - Parts - Accessories to shampoo bowls
******************************************
Hose Receiver Kit for Jeffco Brand Vacuum Breaker
* Has 2 - 1/2" Holes just left of the hose to mount vacuum breaker
* Fastens to shampoo bowl with steel bar with bolt & thumb nut included
* Also included rubber gasket for receiver and vacuum breaker
* Dimension of Receiver 3-1/4" x 2-3/4" * Material: CHROME PLASTIC
* Color: Chrome
******************************************
******************************************
* Fastens to shampoo bowl with steel bar with bolt & thumb nut included
* Also included rubber gasket for receiver * Dimension of Receiver 3-1/4" x 2-3/4"
* Material: CHROME PLASTIC * Color: Chrome
Marble Hose Receiver Kit for Shampoo Bowl
Marble Products Brand Complete 3 1/2" Strainer Assembly
Includes: 3-1/2" Hair Strainer Cup, Strainer Body, Cardboard Gasket,
Locknut, 1-1/2" Drain Tailpiece Tube, Tube Washer, Tube Slip Nut
* Fits All Marble Products Brand Shampoo Bowls * Including: Fiberglass Bowls # 10 & # 30
* Cultured Marble Bowls #100, 200, 2000, 3000W, 4000, 300 & 2001
Marble Products Shampoo Bowl Strainer Cup
* 3-1/2" DiameterFits: Marble Products Shampoo Bowls
* 3-1/2" Diameter * Material: Plastic
* Color: Black/Gray
Page 19Fixtures - Parts - Accessories to shampoo bowls
Marble Products Hose Receiver Kit For Shampoo Bowl
******************************************
******************************************
Maximum of 2-1/4" to accommodate this fixture * Height from sink to top of fixture when opened is 6"
Meets ASME A112.18.1-2003/ CSA B 125-01
Jeffco Fixture Cartridge for #570 Single Handle
Jefco Fixture Cartridge for #570 Single Handle Fits: Jeffco Shampoo Bowls
Meets ASME A112.18.1-2003/ CSA B 125-01
Jeffco Shampoo Bowl Vacuum Breaker
Includes: Vacuum Breaker, Hose Receiver, and Hose to Fixture to Breaker
* Dimension of Receiver 3-1/4" x 2-3/4" * Jeffco Brand
* National Plumbing Code Number: ASSE 1001
This is a one way valve that saves the integrity of the fresh water system by NOT allowing
contaminate water (water contaminated with permsolution, neutralizer, hair color, etc.) from mixing
with the fresh water system that we drink.
Page 20Fixtures - Parts - Accessories to shampoo bowls
Jeffco Fixture #570 Single Handle ChromeMODEL 570
Fits: Jeffco Shampoo Bowls and Marble Products Chrome Lever -Handle
* Fixture Opening in Bowl must be a Minimum of 1-1/2" and a