BILL OF QUANTITIES - EXHAUST BLOWERS    QTY UNIT SUPPLY INSTALLATION

TOTALSr No DESCRIPTION     RATE AMOUNT RATE AMOUNT

A

Supply, installation and commissioning of low noise level PP/ FRP exhaust centrifugal blowers (flameproof motor) housed in 5mm PP & 5mm FRP (Fire Retardant) thick with a extended pleanum having 99.97% HEPA and 5 micron bag in bag out filters. Pedestal and base frame of blowers is M.S with epoxy coat with two coats. EN8 Shaft Bearings of blowers should be of SKF, FAG or NTTF make. Impeller with dynamic balancing complete skid should be mounted on AVM's. Quote with appropriate blower h.p for the cfm mentioned below.              

1EAU 5 13810 cfm, 90mm wg static (with VFD) 99.97% HEPA and 5 micron bag in bag out filters 1 Nos.          

2 EAU 6 14155 cfm, 90mm wg static (with VFD) 1 Nos.          3 EAU 7 15365 cfm, 90mm wg static (with VFD) 1 Nos.          

4EAU 8 4745 cfm, 90mm wg static 99.97% HEPA and 5 micron bag in bag out filters 1 Nos.          

5EAU 9 4670 cfm, 90mm wg static 99.97% HEPA and 5 micron bag in bag out filters 1 Nos.          

6EAU 15 3970 cfm, 90mm wg static 99.97% HEPA and 5 micron bag in bag out filters 1 Nos.          

7EAU 16 4315 cfm, 90mm wg static 99.97% HEPA and 5 micron bag in bag out filters 1 Nos.          

8EAU 17 1710 cfm, 90mm wg static 99.97% HEPA and 5 micron bag in bag out filters 1 Nos.          

                 

 

Supply, installation and commissioning of low noise level PP/ FRP exhaust centrifugal blowers (flameproof motor) housed in 5mm PP & 5mm FRP (Fire Retardant) thick with a extended pleanum having 10 micron . Pedestal and base frame of blowers is M.S with epoxy coat with two coats. EN8 Shaft Bearings of blowers should be of SKF, FAG or NTTF make. Impeller with dynamic balancing complete skid should be mounted on AVM's. Quote with appropriate blower h.p for the cfm mentioned below.              

1 EAU 11 5230 cfm, 65 mm wg static 1 Nos.            EAU 12 8545 cfm, 65 mm wg static 1 Nos.            EAU 13 5905 cfm, 65 mm wg static 1 Nos.            EAU 18 8415 cfm, 65 mm wg static 1 Nos.            EAU 19 6210 cfm, 65 mm wg static 1 Nos.            EAU 20 7430 cfm, 65 mm wg static 1 Nos.            EAU 21 1395 cfm, 65 mm wg static 1 Nos.                           B GRILLS/DAMPERS              

1

Butterfly dampers made out of 5mm thick polypropylene sheets lined complete with PP shaft and lock, SS operating handle for blower only              

a 950 mm Dia 3 Nos.          b 750 mm Dia 3 Nos.          c 600 mm Dia 3 Nos.          d 550 mm Dia 3 Nos.          e 500 mm Dia 1 Nos.          f 350 mm Dia 2 Nos.                           

GMP Technical Solutions Private Limited: Bldg. No. 14, CST No. 82,82 (1 to17). L.B.S. Marg, Vikhroli (W), Mumbai 400 083, India. Tel.: 91 22 2576 1956, Fax: 91 2225712710. Website: www.gmpts.com E-mail: projects@gmpts.comWorks:Kurawala, Barotiwala,Kasauli, Solan, H.P. 174103 India Tel:91 9218466806, 91 9218466808, Fax:91 1792255227Mr.Ajay Mehta – 919816087474, Mr. Sunil Jain – 91 9815255554

2

Butterfly dampers made out of 5mm thick polypropylene sheets lined complete with PP shaft and lock, SS operating handle for PP grill module              

a 350 mm Dia 70 Nos.          b 650 mm Dia 64 Nos.                           

c

As per enclosed drawing Grill module made of 5 mm thick flanges with linear PP sheets and 10mm thick with linear PP grill coated used in corrosive reactor and adjacent area 400 Nos.          

dAlternate- SS 304 perforated grills with VCD for return air module (reactor and adjoining areas) 400 Nos.          

                                  D Ducting              

a

Exhaust ducting using FRP (fire retarded) lined Polypropylene sheets with welded joints complete with flanges, bends, transition pieces, branch entries, canvass connections, supports, SS hardwares etc as per the enclosed spec              

1 3mmPP + 3mm FRP 6400 Nos.          2 4mmPP + 4mm FRP 9600 Nos.          

                 

b

Exhaust stack ducting using FRP (fire retarded) lined Polypropylene sheets with welded joints complete with flanges, bends, transition pieces, branch entries, canvass connections, supports, SS hardwares etc as per the enclosed spec. The stack should be 3m height with whether cowl.              

1 3mmPP + 3mmFRP 13 Nos.          2 4mmPP + 4mmFRP 2 Nos.          

                 E Pressure monitoring System              

 Magnahelic gauge fixed on VAU and EAU (0-50 mm wg) 15 Nos.          

                 

 Pressure differential switch included relay and audio alarm 51 Nos.          

GMP Technical Solutions Private Limited: Bldg. No. 14, CST No. 82,82 (1 to17). L.B.S. Marg, Vikhroli (W), Mumbai 400 083, India. Tel.: 91 22 2576 1956, Fax: 91 2225712710. Website: www.gmpts.com E-mail: projects@gmpts.comWorks:Kurawala, Barotiwala,Kasauli, Solan, H.P. 174103 India Tel:91 9218466806, 91 9218466808, Fax:91 1792255227Mr.Ajay Mehta – 919816087474, Mr. Sunil Jain - 919815255554

GMP Technical Solutions Private Limited: Bldg. No. 14, CST No. 82,82 (1 to17). L.B.S. Marg, Vikhroli (W), Mumbai 400 083, India. Tel.: 91 22 2576 1956, Fax: 91 2225712710. Website: www.gmpts.com E-mail: projects@gmpts.comWorks:Kurawala, Barotiwala,Kasauli, Solan, H.P. 174103 India Tel:91 9218466806, 91 9218466808, Fax:91 1792255227Mr.Ajay Mehta – 919816087474, Mr. Sunil Jain - 919815255554