BIOGRAPHICAL RESUME

Dr. Rahmat A. Shoureshi

Interim President

Provost and Vice President for Academic Affairs

New York Institute of Technology

Education:

Ph.D. ME Massachusetts Institute of Technology 1981

M.S. ME Massachusetts Institute of Technology 1978

B.S. ME Sharif University of Technology 1975

Table of Contents

Highlights of Academic Administration & Recent Accomplishments ii

I. Professional Positions 1

a. Academic Positions

b. External Positions

II. Honors and Awards 3

III. Society Memberships & Professional Activities 4

IV. Keynote and Plenary Speeches 7

V. Chairship & Organization of Global Initiatives 8

VI. Short Courses and Seminars 9

VII. Educational and Research Interests 18

VIII. Patents 18

IX. Research Proposals under Review 18

X. Awarded Research Grants 19

XI. Books and Book Chapters 23

XII. Refereed Publications 25

XIII. Academic Activities 40

XIV. Visiting Scholars, Post Docs, Students Supervision 42

XV. External Activities 48

ii

1

I. Professional Positions

A. Academic Positions

17 – Present Interim President, New York Institute of Technology (NYIT), New York

11 – 2016 Provost and Vice President for Academic Affairs, New York Institute of

Technology (NYIT), New York

03 – 2011 Dean, School of Engineering & Computer Science, University of Denver

01 – 2003 Associate Vice President and Director of Office of Technology Transfer,

Colorado School of Mines (CSM)

01 – 2003 Chair, CSM Bioengineering and Life Sciences (BELS) Program

94 - 2003 G.A. Dobelman Endowed Chair Professor of Engineering, Engineering

Division, Colorado School of Mines (CSM), Golden, Colorado.

98- 2003 Director of NSF Industry/University Cooperative Research Center for

Intelligent Biomedical Devices and Musculoskeletal Systems (IBDMS),

CSM, Golden, Colorado.

94 - 2003 Director of the Center for Automation, Robotics and Distributed

Intelligence (CARDI), CSM, Golden, Colorado

93 - 2003 Director of NSF Power Systems Engineering Research Center (PSERC),

Purdue University and Colorado School of Mines (CSM), Golden,

Colorado.

94 - 1997 Founding Chairman of Engineering Systems Graduate Program, Colorado

School of Mines (CSM), Golden, Colorado.

92 - 1994 Chairman of Systems, Measurement and Control Area, School of

Mechanical Engineering, Purdue University, West Lafayette, Indiana.

91 - 1994 Professor, School of Mechanical Engineering, Purdue University, West

Lafayette, Indiana.

90 - 1992 Founding Chairman of the Manufacturing and Materials Processing Area,

School of Mechanical Engineering, Purdue University, West Lafayette,

Indiana.

87 - 1991 Associate Professor, School of Mechanical Engineering, Purdue

University, West Lafayette. Taught graduate and undergraduate courses

and performed research in Systems, Measurement and Control area.

Pioneered Mechatronics, Intelligent Buildings and Active Noise and

Vibration Control research areas.

2

83 - 1987 Assistant Professor, School of Mechanical Engineering, Purdue

University, West Lafayette, Indiana. Developed a new course and

laboratory on Microprocessor Control, and a Robotics research laboratory.

81 -1983 Assistant Professor of Mechanical Engineering, Wayne State University,

Detroit, Michigan. Developed a new course and a new laboratory entitled:

"Microprocessors for Measurement and Control". Established a new M.S.

degree program between Ford Motor Company and Wayne State

University.

79 - 1981 Instructor and Teaching Assistant, Design and Control Division of the

Mechanical Engineering Department, Massachusetts Institute of

Technology (MIT), Cambridge, Massachusetts.

1991 Sabbatical Leave:

Jet Propulsion Laboratory, Cal Tech, Pasadena, CA, Machine Intelligence

Group - Researched on "Intelligent Control Systems for Space Vehicles."

Naval Postgraduate School, Monterey, CA, Autonomous Underwater

Vehicle Group - Researched on "Neuro-Diagnostics for Autonomous

Vehicles."

Cooper Engineered Products, Aubrun, IN, Advanced Product

Development Group, Developed a state-of-the-art CAD System for

"Optimal Design of Vehicle Mounting System."

B. External Positions

00 – Present Taskforce Member, New York Mayor initiative on Tech-Talent Pipeline

00 – Present Board Member, Tactile Navigation Tools, New York

00 – Present Board Member, Innovative Technology Frontiers, Colorado

04 – 2011 Board Member, C-TEK, Venture Group

03 – 2011 Board Member, Colorado Bioscience Association (CBSA)

06 – 2011 Vice Chair of the Board, Colorado Nanotechnology Association (CNA)

08 – 2011 Board Member, Colorado Software and Internet Association (CSIA)

09 – 2011 Board Member, MindSport, Regional Organization for the US FIRST

06 – 2011 Board Member, Denver Venture High School

3

03 – 2011 Member, Executive Committee, DU Office of Technology Transfer

00 – 2011 Chair of the USA-Europe Task Force on Bio-Inspired Design, Sensor

Technologies and Smart Structures, a joint National Science Foundation

(NSF), Air Force Office of Scientific Research (AFOSR) and European

Science Foundation (ESF) Initiative.

04 – 2007 Member, Colorado Governor’s Science & Technology Council

01 – 2003 Administrator, Colorado Commission for Higher Education (CCHE) Seed

Grant Program in Biosciences.

99 - 2004 Chairman of the Board and President, Colorado Alliance for

Bioengineering (CAB), an Integrated Research and Education Effort among six institutions: CU Health Sciences Center, CU-Boulder, CU-

Denver, Colorado State University, Colorado School of Mines and the University of Denver.

96 - 2003 Member of Board of Directors, Rocky Mountain Musculoskeletal

Research Laboratories (RMMRL), Denver, Colorado.

87 - 2000 Chief Technical Advisor Cooper Engineered Products.

76 - 1977 Combustion Engineering Co., Windsor, Connecticut, Reactor Design

Division, Responsible for modeling, simulation and experimental

verification of fuel elements in nuclear reactor core.

74 - 1976 Design Engineer and Project Manager, R&D Dept., Atmosphere

Manufacturing, Co., Tehran, Iran, responsible for the design and

development of a new chiller production line.

II. Honors and Awards

Keynote Speaker, 2017 DINAME, Sao Sebastiao, SP, Brazil, March 2017

NAFSA Award for Leadership in a Global University, 2016

Year of Turkey Award, Turkish Consulate, for establishing academic partnerships with

universities in Turkey, 2013

Commencement Speaker, University of Denver, 2010

Leadership Award, ASME Dynamic Systems & Control Division, 2006

American Automatic Control Council Eckman Award, 1987

Fellow, American Society of Mechanical Engineers (ASME), 1989

4

General Chair, 2011 American Control Conference, San Francisco

General Chair, 2009 ASME Dynamic Systems and Control Conference, Los Angeles

General Chair, 2004 Japan-USA Symposium on Flexible Automation, Denver

Member, European Academy of Sciences, 2005

Member of Colorado Governor’s Science and Technology Council

Selected as the 2000 Southwest Mechanics Lecturer of the Year, lectured at six

universities

Recipient of the SAE Award for Excellence in Oral Presentation at the 1989 SAE Noise

& Vibration Conference & Exposition

Named as a Symbol of "Academic Excellence", by Fort Wayne Journal Gazette, June 9,

1985

February 1982 Selected as best teaching faculty member of Mechanical Engineering

Department at Wayne State University

February 1981, Outstanding Graduate Student of Mechanical Engineering Department at

M.I.T. (Tuition Award)

January 1976 to January 1979, Recipient of Sharif University of Technology scholarship

1971 to 1975, Among top five students of Mechanical Engineering Department at Sharif

University of Technology, Iran (Four years of Tuition Award).

III. Society Memberships and Professional Activities

Fellow, American Society of Mechanical Engineers – ASME

Member, CAO, American Council on Education – ACE

Senior Member, Institute of Electrical and Electronic Engineers - IEEE

Member, Society of Automotive Engineers - SAE

Member, American Society of Engineering Education - ASEE

Member, Biomedical Engineering Society – BMES

General Chair, ASME Dynamic Systems and Control Conference, October 12-14, 2009,

Hollywood, California

5

General Chair, 2011 American Control Conference, June 2011, San Francisco, California

Director and ASME Representative on American Automatic Control Council (2000-

2004)

Member of International Editorial Board, Smart Structures and Systems, an International

Journal of Mechatronics, Sensors, Monitoring, Control, Diagnosis, & Measurements

Past Member of ASME-DSC Executive Committee

Founding chairman of the ASME new initiative on Engineering Systems (1995-1999)

Vice-President, International Federation of Intelligent Control (1994-1997)

Member of Technical Committee, Smart Structures Technologies and Earthquake

Engineering Conference, Osaka, Japan, 2003

Member of Technical Committee, 2004, Earthquake Engineering Conference, Nanjing,

China

Selected as one of the eight IEEE international member team to write the “Advanced

Control Systems” self-study book

Member of Editorial Board, Smart Structures Journal, Prentice Hall (2003-Present)

Member of Editorial Board, Control Engineering Practice, Journal of International

Federation of Automatic Control (1991-1994).

Member of Editorial Board, Scientia Iranica Journal (1998-Present)

General Chair, 2004 Japan-USA Symposium on Flexible Automation, Denver, Colorado.

Chair, Local Arrangements, 2003 American Control Conference, Denver, Colorado.

Co-Chair, 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan.

Member of Program Committee 1996-present, ANNIE conference.

Member of Executive Committee, 2000 Japan-USA Symposium.

Organizer and session chairman at the American Control Conferences (ACC) and ASME-

IMECE meetings.

Associate Editor, ASME Journal of Dynamic Systems, Measurement and Control

(1986-1993).

6

Member of the NSF Select Panel to evaluate "Presidential Faculty Fellows," February,

1992.

Summer 1992, NSF Invited Speaker, Joint USA-Japan-Italy Workshop on Intelligent

Structures, Sorrento, Italy, July 1992.

Summer 1990, NSF Invited Speaker, Joint USA-Japan-Taiwan Workshop on Intelligent

Structures, Taipai, Taiwan, July 1990.

Member of the NSF Select Panel on "Research Goals and Priorities in Neuro-Control

Systems," NSF-McDonnell Douglas Workshop, October 1990.

Member of the NSF Select Panel to Review "Engineering Initiation Award" proposals,

1987, 1989.

Member of the NSF Select Panel on "Research Goals and Priorities in System Dynamics

and Control," NSF-ASME Workshop, June 1986.

Member of the "Select Panel on Research Goals and Priorities on Intelligent Buildings,"

NSF Workshop, March 1986.

Member of the Select Panel on "Research Goals and Priorities in Thermal Systems,"

NSF-ASME Workshop, April 1984.

Associate Editor, Applied Mechanics Review (1984-1987).

Member of Program Committee, "International Conference on Intelligent Manufacturing

'95 (ICIM '95), Wuhan, P.R. China, June 1995.

Member of Program Committee, "International Conference on Intelligent Structures," Los

Angeles, CA, August 1994.

Member of Program Advisory Board, "Industrial Fuzzy Control and Intelligent Systems,"

College Station, TX, December 1993.

Member of the NSF Special Task Force on "Intelligent Materials Systems,"

Williamsburg, VA, November 1993.

Organizer and Chairman of Active Noise and Vibration Control Technical Panel of the

Dynamic Systems and Control Division of ASME (1994-1997).

Member of Planning Committee for the IFAC Symposium on "Advances in Control

Education," Boston, June 1991.

1987 ASME Winter Annual Meeting Program Chairman, Dynamic Systems,

Measurement and Control Division.

7

Organizer and Chairman of American Control Conference (ACC) Special Session on

"Intelligent Control in Practice," June 1992.

Chairman of "Neural Network Application to Control Problems," 13th IMACS World

Congress, Dublin, Ireland, July 1991.

Chairman of "Symposium on Intelligent Systems in Control and Robotics," 13th IMACS

World Congress, Dublin, Ireland, July 1991.

Organizer and Chairman of ACC Special Session on "Mystique of Intelligent Control

Systems," American Control Conference, May 1990.

Organizer and Chairman of Expert Systems and Artificial Intelligence Technical Panel of

the Dynamic Systems and Control Division of ASME (1985-1993).

Chairman of "Expert Systems and Pattern Recognition," session at the Japan-USA

Symposium on Flexible Automation, Osaka, Japan, July 1986.

Organizer and Chairman of "Modeling Dynamics and Failure Detection for Thermofluid

Processes and Systems," sessions at the American Control Conference (1984, 1985 and

1986).

Chairman of "Process Control" session at IFAC/IFORS Conference, sponsored by the

Chinese Academy of Sciences, Beijing, People Republic of China, August 1985.

Chairman of Energy Systems and Control Panel of the Dynamic Systems and Control

Division of ASME (1983-1986).

Member of the Program Committee, UPCAEDM Conference (University Programs on

Computer Aided Engineering, Design, and Manufacturing) Purdue University, July 1985.

Member of the Select Panel for the NSF Workshop on "Tactile Stimulators" at Indiana

University, May 1985.

IV. Keynote and Plenary Speeches

Plenary Speaker, 14th

International Symposium on Dynamic Problems in Mechanics,

March 13-18, 2011, Sao Paulo, Brazil

Plenary Speaker, 3rd

International Conference & Exhibition on Unmanned Aerial

Vehicles, June 21-23, 2010, Dubai

Plenary Speaker, European Science Foundation Conference on Smart Sensors for

Structural Technology (S3T), April 7-10, 2010, Porto, Portugal

Plenary Speaker, 2nd

Mediterranean Conference on Intelligent Systems and Automation,

March 23-25, 2009, Tunisia

8

Plenary Speaker, 2nd

International Summit on Nano Renewable Energy, June 21-24,

2009, Denver, Colorado

Keynote Speaker, Joint NSF and Japan Science & Technology (JST) Workshop on Future

Sensor Technologies, July 2007, Tokyo, lectured on “Bio-Inspired Autonomic Systems

for Enhanced Quality of Life.”

Keynote Speaker, 3rd

International Conference on Smart Materials and Sensor

Technologies, May 2007, Chongqing, China, lectured on “Bio-Inspired Structural

Monitoring System Architecture.”

Keynote Speaker, NATO Conference on Nano-Materials, Greece, lectured on

“Biomimetic- Based Nervous System for Civil Structures,” May 2005.

Keynote Speaker, Structural and Earthquake Engineering Conference, Nanjing, China,

lectured on “Informatics and Sensor Intelligence: Research and Curriculum Needs,”

October 2004.

Keynote Speaker, Colorado Innovation Summit, Denver, Colorado, lectured on “Re-

engineering of Engineering Education,” September 2004.

Member of the Testimonial Panel on “Impact of Nanotechnology” Colorado State Senate,

March 2004.

Keynote Speaker for “European Industry-University Center for Biomedical Engineering,”

The Queen’s University, Belfast, Northern Ireland, June 2001

November 1998, Keynote Speaker, First USA-China-Japan Symposium on

“Infrastructure Systems”

November 1996, Keynote Speaker, 1996 ANNIE Conference, St. Louis, Missouri.

Lectured on “Intelligent Control in Practice”

March 1995, Keynote Speaker, Sixth Symposium on Dynamic Problems of Mechanics,

lectured on "Towards the Development of Intelligent Structures," Minas Gerais, Brazil.

November 1993, Keynote Speaker, International Conference on Numerical Methods in Engineering," lectured on "Artificial Neural-Networks: A Step Closer to Human

Information Processing," Sao Paulo, Brazil.

June 1992, Keynote Speaker, International Conference on Applications of Mechanics,

Tehran, lectured on "Mechanical Engineering and Factory-of-the-Future."

V. Chairship and Organization of Global Initiatives

9

Chair, NSF Sponsored China Short Course Series on “Sensors, Informatics, Structural

health Monitoring and Active Structural Control”, December 12-20, 2003, Shanghai,

Harbin, and Beijing, China.

Chair, “US-Europe Workshop on Reverse Engineering of the Human Brain,” May 22-26,

2010, Dubrovnik, Croatia, sponsored by NSF/AFOSR/ESF.

Chair, “US-Europe Workshop on Biosensors, Bioactuators and Bio-Inspired Systems,”

June 15-17, 2008, Sicily, Italy, sponsored by NSF/AFOSR/ESF.

Chair, “European Science Foundation – NSF- AFOSR Workshop on Morphing

Aerospace Structures,” Nov. 6-9, 2007, St. Maxim, France.

Chair, “US-Europe Workshop on Autonomic Structures,” May 26-29, 2006, Nice,

France, sponsored by NSF/AFOSR/ONR/ESF.

Chair, “European Science Foundation – NSF Workshop on Sensor Technology and Smart

Structures,” June 26-29, 2005, Santorini, Greece

Chair, “European Science Foundation – NSF Workshop on Sensor Technology and Smart

Structures,” September 30 – October 4, 2003, Strasbourg, France

Chair and Organizer, NSF/DARPA/NIH/DOE/NASA/ARO/AFOSR/ONR Workshop on

“Future Sensor Technologies,” August 26-28, 2002, Lake Tahoe.

Chair and Organizer for “US NSF-China NSF Program on Smart Structures,” 2002-2004.

General Co-chair, 2002 Japan-USA Symposium on Flexible Automation, July 15-17,

2002, Japan.

1998 Chairman and Organizer of US-NSF and China-NNSF sponsored symposium on

“Future Research Directions in Civil Infrastructures,” a trilateral workshop between USA,

China and Japan.

1996 Chairman and Organizer of NSF-EPRI-NIST sponsored workshop on “Future

Research Directions in Intelligent Control,” Gaithersburg, Maryland, June 1996.

Chairman, CSM Academy, a committee of the CSM Distinguished Professors charged

with providing vision and long range planning for the institution (1998 – 2003).

Chairman, ASME Dynamic Systems and Control Division (1996 – 1997)

November 1993, one of the eight-member NSF Select panel on Intelligent Material

Systems and Structures, "Their role in rebuilding and enhancing the Nation's

Infrastructure".

Organizer and Chairman of NSF-EPRI Workshop on "Intelligent Control Systems,"

October 1990.

10

VI. Short Courses and Seminars

A. Short Courses

“Advanced Mechatronic Monitoring System for High Voltage Transmission Lines,”

EPRI Overhead Transmission Lines Maintenance Symposium, Charlotte, NC, May 2007.

“Sensor Informatics and Advanced Vibration Control of Civil Structures,” presented at

Third International Conference on Earthquake Engineering, Nanjing, China, October

2004.

“Informatics and Sensor Intelligence,” Short course at top three China Universities in

Shanghai, Harbin and Beijing, December 2003.

“Intelligent Monitoring System for Energized Transmission Lines,” EPRI, Charlotte,

North Carolina, December 2003.

“Active Noise and Vibration Control,” Audi and VW, November 1999.

“Intelligent Control Systems,” General Motors, March 1998.

“Fuzzy Control and its Applications to Power Systems,” Colorado School of Mines, Dec.

8, 1994

“Intelligent Control Systems,” Sao Paulo, Brazil, November 29-30, 1993.

United Nations invitee, TOKTEN project, Sharif University of Technology, Tehran, June

1992, gave short courses and seminars on the subjects of “Intelligent Control Systems,”

“Microprocessor-based Control Systems,” and “Active Noise and Vibration Control.”

Instructor of an annual five-day short course on "Principles and Applications of

Microprocessors for Measurement and Control," first week of June (1985-1989), Purdue

University.

Organizer and instructor of an annual four-day short course on "Active Noise and

Vibration Control," Ray W. Herrick Laboratories, Purdue University, 1989-1992, with

Professors R. Bernhard and J. Jones.

Organizer and instructor of an annual Engineering/Management short course on

"Introduction to Microprocessors and their Applications," April 1988, 1989, and 1990.

Organizer and instructor of a two-day short course on "Software/Hardware and

Applications of Microprocessors", Purdue University, in conjunction with the

International Institute of Refrigeration (IIR) Conference, August 1986.

Organizer and instructor of an ASME two-day short course on "Introduction to

Microprocessors and Their Applications, "November 1986, San Francisco, CA.

11

Organizer and instructor of a two-day short course on, “Embedded Microcontrollers for

System Automation,” Kodak Company, Rochester, New York, June 1985.

Organizer and instructor of a three-day short course on, “Mechatronics Design for

Thermal Systems,” Copeland Corporation, June 1986.

B. Seminars

“Advanced Technologies in Non-Destructive Monitoring and Diagnostics of Electric

Power Infrastructures,” EPRI Workshop on Transmission Lines, September 2009,

Atlanta, GA.

“Quiet Crisis: Educational Needs in STEM Areas,” May 2009, Denver Rotary Club.

“Smart Diagnostic System for Non-Invasive Corrosion Assessment in Energized Electric

Transmission & Distribution Infrastructure,” Invited speaker, EPRI Conference, August

12, 2008, Cheyenne, Wyoming.

“Bio-Inspired Autonomic Structures,” Invited speaker, CIMTEC Conference, June 11,

2008, Sicily, Italy.

“Next Generation of Engineers for the 21st

Century Technologies,” Loveland High

School, Colorado, Feb. 6, 2008.

Keynote Speaker, Joint NSF Japan Science & Technology (JST) Workshop on Future

Sensor Technologies, July 2007, Tokyo, lectured on “Bio-Inspired Autonomic Systems

for Enhanced Quality of Life.”

Keynote Speaker, 3rd

International Conference on Smart Materials and Sensor

Technologies, May 2007, Chongqing, China, lectured on “Bio-Inspired Structural

Monitoring System Architecture.”

“Autonomous Systems,” NSF Speaker, Directorate of Engineering, March 2007.

Keynote Speaker, NATO Conference on Nano-Materials, Greece, lectured on

“Biomimetic- Based Nervous System for Civil Structures,” May 2005.

Keynote Speaker, Structural and Earthquake Engineering Conference, Nanjing, China,

lectured on “Informatics and Sensor Intelligence: Research and Curriculum Needs,” October 2004.

Keynote Speaker, Colorado Innovation Summit, Denver, Colorado, lectured on “Re-

engineering of Engineering Education,” September 2004.

“Intelligent Structures and Distributed Sensors,” Osaka University, July 2004.

“Intelligent Electric Power Generation Control for Highly Varying Lands,” Oak Ridge

National Lab, January 2004.

12

“State of Nanotechnology in USA and Abroad,” Nano/Micro Technology Summit, NIST,

Boulder, May 2004.

“Bioengineering Fundamentals,” 2003 Biowest, October 2003, Denver, Colorado.

“University Technology Commercialization,” SBIR Colorado, March 2004, Denver,

Colorado.

“Assistive Technologies for Geriatrics and Disabled,” IEEE Rocky Mountain Chapter,

November 2003, Denver, Colorado.

“BioEconomy, The Role of University Bioengineering Research in State Economy,” 2002

Colorado Bio Expo, Dec. 4, Aurora, CO.

“Non-Destructive Health Assessment of Live Overhead Transmission Lines,” EPRI T&D

Symposium, May 14-17, 2002, Monterey, CA.

“Electro-Magneto-Vibration Transducers for Health Assessment of Structures and Wire

Ropes,” US-European Workshop on Smart Structures, Como, Italy, April 2002.

“Foundations for a Successful Industry/University Research Center in Bioengineering,”

Queen’s University, Northern Ireland, June 2001.

“Applied Active Noise and Vibration Control,” Colloquium Speaker, Dept. Electrical and

Computer Engineering, University of New Castle, Australia, May 2001.

“Bionic Orthopedics,” Seminar Speaker, Biomedical Engineering Institute, University of

Karlsruhe, Germany, April 2001.

“Colorado Alliance for Bioengineering,” Biotechnology Seminar series, Bio-Science

Park, Aurora, Colorado, Dec. 2000.

“Advanced Monitoring System for Electric Transmission Lines,” Electric de France R&D

Center, Claramont, France, Nov. 2000.

Lecture Series: “Analysis, Design and Implementation of Active Control Technology,”

Southwest Mechanics, various Universities and Colleges, February 2000.

“Active Noise Control for Communication Enhancement,” Bose Corporation, Jan. 2000.

“Multi-Site Biomedical and Power Centers- Lessons Learned,” NSF I/UCRC Directors

Meeting, January 1999.

“Smart Implants and Biomedical Devices,” CATI Commissioners Meeting, January 13,

1999.

13

“Active Communication and Voice Enhancement System,” Lear Corporation Technical

Center, Detroit, MI, March 16, 1999.

“Fuzzy-Based Energy Management System for Residential and Commercial Buildings,”

Dept. of Energy, Research Review Meeting, March 30, 1999.

“Advanced Technologies for Enhanced Automotive NVH,” GM Technology Center,

Warren, MI, April 27, 1999.

“Intelligent Biomedical Devices,” IBDMS Industry Advisory Board (IAB)Meeting, May

20, 1999.

“Toward the Development of Smart Substations,” Tennessee Valley Authority and

Kansas City P&L, Univ. of Wisconsin, Madison, June 27, 1999.

“Needs and Priorities in Bioengineering,” Jefferson County Economic Development

Authority, Golden, CO, July 14, 1999.

“Technological Advances in Power Engineering, “ EPRI/WAPA/Tri-State Meeting,

Golden, CO, July 21-22, 1999.

“Modeling and Design of Telemetric Patella,” Special CASI Meeting, Denver, October

4, 1999.

“Active Noise Control for Automotive Vehicles,” SAAB Engineering Center, Trollhoten,

Sweden, November 2, 1999.

“Active Technologies for Automotive NVH Enhancement,” Opel Engineering Center,

Dudenhoffen, Germany, November 30, 1999.

“Development of a Joint Curriculum in Bioengineering,” Colorado Academic Alliance in

Bioengineering, Boulder, CO, December 16, 1999.

“Smart Implants and Biomedical Devices,” CATI Commissioners Meeting, May 13,

1998.

“Active Noise and Vibration Control,” United Technologies, Research Center, Hartford,

CT, June 23, 1998.

“Fuzzy-Based Energy Management System for Residential and Commercial Buildings,”

International Photovoltaic Conference, Vienna, Austria, July 8, 1998.

“Automated Assembly Cell Using Vision Based Robot Control,” Japan-USA Symposium

on Flexible Automation, July 15, 1998.

“Remote Robotic Manipulators for Hazardous Environments,” Rocky Flats, Golden,

Colorado, July 23, 1998.

14

“Advanced Technologies for Enhanced Automotive NVH,” GM Technology Center,

Warren, MI, August 7, 1998.

“Toward the Development of Smart Substations,” Joint Tennessee Valley Authorities and

WAPA Meeting, Golden, CO, August 5, 1998.

“Needs and Priorities in Bioengineering,” CATI Meeting, Westminster, CO, August 21,

1998.

“Role of Bioengineering in CSM Curriculum,” Presentation to the CSM Board of

Trustees, Golden, Colorado, November 12, 1998.

“3-D Modeling and Design of Smart TMG,” Special NIH Meeting, Bethesda, MD,

December 8, 1998.

“Active Noise Control for Automotive Vehicles,” VW Engineering Center, Wolfshurg,

Germany, December 15, 1998.

“Development of a Joint Curriculum in Bioengineering,” Colorado Academic Alliance in

Bioengineering, Denver, CO, December 16, 1998.

"Remote Monitoring and Health Assessment of Machinery in Large Scale Manufacturing

Systems," Honda of America, Marysville, Ohio, February 12, 1997.

"Toward the Development of Intelligent Biomedical Devices," Colorado Biomedical

Association, Lakewood, CO, February 20, 1997.

"Smart Implants and Braces," NSF I/UCRC Planning Meeting, Rose Medical Center,

Denver, Colorado, Feb. 27, 1998.

"Electronic Customer/Utility Interface System," Northern Indiana Public Service

Co.(NIPSCO), Hammond, Indiana., March 5, 1997.

"Active Interior Noise Control with Applications to Trucks," NAVISTAR Corporation,

Ft. Wayne, Indiana, March 6, 1997.

"Advanced Automatic Electric Generation Control," ACEPS Industry Advisory Board

Meeting, NISPCO, Merrillville, Indiana, May 15, 1997.

"Active Vibration Control: A New Generation of Engine Mounts," Ford Motor Company,

Dearborn, Michigan, June 18, 1997.

"Development of New Vibration Control Technology," GM Advanced Vehicle

Development, Warren, Michigan, June 26, 1997.

"Development of Smart Implants," Annual Meeting of Colorado Advanced Software

Institute, Denver, Colorado, August 8, 1997.

15

"Feedforward/Feedback Active Technology with Applications to Automotive Systems,"

Chrysler Advanced Engineering, Detroit, Michigan, Sept. 18, 1997.

"Implementation of DSP-Based Active Vibration Control," VW Automotive Engineering

Wolfsburg, Germany, Sept. 29, 1997.

"Advances in Power Engineering and Substation Automation," Kansas City Power and

Light, Kansas City, Nov. 6, 1997.

“Intelligent Control In Practice,” Keynote speaker, 1996 ANNIE, Conference, St. Louis,

Missouri, November 1996.

“Intelligent Substation Monitoring System,”, WAPA’s Mead Substation, Las Vegas,

Nevada, March 13, 1996.

“Overview of Research Projects at CSM-ACEPS,” Industry Advisory Board

(IAB)Meeting, Golden, Colorado, March 28, 1996.

“Intelligent Control Systems,” General Motors Powertrain Division, Warren, Michigan,

April 9, 1996.

“Active Interior Noise Reduction for Tracks,” Navistar Corporation, Fort Wayne, Indiana,

May 1, 1996.

“Applications of Anticipatory Control for Automatic Electric Power Generation,” EPRI

Power Quality Workshop, Memphis, Tennessee, May 14, 1996.

“Hybrid Control of Cable-Stayed Bridges,” Annual meeting of ASCE, Fort Lauderdale,

Florida, May 21, 1996.

Planerary Speaker: “Overview of Intelligent Control Systems,” NSF/NIST/EPRI

Workshop on New Directions in Intelligent Systems, Gaithersburg, Maryland, June 11,

1996.

“Medical Applications of Active Technology,” Hill Rom Corporation, Columbia, South

Carolina, June 14, 1996.

“Applied Intelligent Control,” Panel Speaker, IFAC World Congress, San Francisco,

California, July 3, 1996.

Advance in Automotive Active Control Technology,” Continental International, Hanover,

Germany, August 13, 1996.

“Intelligent Automatic Generation Control,” Northern Indiana Public Service Company

(NIPSCO), Merrillville, Indiana, September 19, 1996.

“Active Control of Structures,” NSF Coordination Meeting, South Bend, Indiana,

October 4, 1996.

16

“Intelligent Diagnostics and Generation Control,” Industry Advisory Board (IAB)

Meeting, , Tucson, Arizona, October 31, 1996.

Special presentation: “Advanced Control of Power Engineering Systems” College of

Engineering, Penn State University, April 1995.

Special seminar: “Making Machines More Intelligent,” Johnson Control Inc., Research

and Development Center, Milwaukee, Wisconsin, November 1995.

“Engineering Systems,” planning sessions for new ASME initiatives, 1995 ASME-

IMECE, San Francisco, California, November 1995.

Banquet speaker: “Power System Research Activities at CSM,” IEEE Colorado Chapter,

November 1995.

Seminar Speaker: "Active Noise and Vibration Control," College of Engineering,

University of California, Irvine, May 1995.

Seminar Speaker: "Intelligent Automatic Power Generation Control," Engineering

College, University of Michigan, Ann Arbor, April 1995.

Keynote speaker: "Toward the Development of Intelligent Structures," DINAME 95,

Brazil, March 1995.

Seminar Speaker: "Neural-Based Estimation and System Identification," Speaker for the

CSM Intelligent Systems Series, March 1995.

Seminar Speaker: Dept. of Electrical Engineering, University of Campinas, Brazil,

"Neuro-Fuzzy Control Systems," November 1993.

Special Seminar: Brazilian Electric Power Research Council, Rio DeJenerio, "Neural-

Networks for Information Processing," November 1993.

Seminar Speaker: Engineering Division, Colorado School of Mines, "Intelligent Control

Systems for Manufacturing Automation," September 1993.

Seminar Speaker: Dept. of Mechanical Engineering, Wayne State University, Detroit, MI,

"Applications of Intelligent Control to Building Systems," March 1993.

Seminar Speaker: Iran National Oil Company, Tehran, "Robot Assisted Assembly

Systems," June 1992.

Seminar Speaker: Department of Mechanical, Nuclear, and Aerospace Engineering,

University of California, Los Angeles, CA, " Intelligent Building Control Systems," July

1992.

17

Seminar Speaker: Department of Mechanical Engineering, Naval Postgraduate School,

Monterey, CA, "Active Vibration Control," February 1991.

Seminar Speaker: Department of Mechanical Engineering, California Institute of

Technology, Pasadena, CA, "Neural Networks for Identification and Control of Dynamic

Systems," April 1991.

Seminar Speaker: Department of Mechanical Engineering, Arizona State University,

Tempe, AZ, "Intelligent Control for Autonomous Machines," March 1991.

Seminar Speaker: Department of Mechanical and Environmental Engineering, University

of California, Santa Barbara, "Active and Semi-active Vibration Control," April 1990.

Seminar Speaker: Jet Propulsion Laboratory, Pasadena, CA, "Learning for Autonomous

Robotic Manipulators," April 1990.

Colloquium Speaker: University of Illinois, Champaign, lectured on "Machine Learning

for Intelligent Control Systems," March 1989.

Colloquium Speaker: Department of Mechanical Engineering, Purdue University,

lectured on "Autonomous Machines: Is It a Dream or Reality?" April 1989.

Colloquium Speaker: University of Minnesota, lectured on "Integration of A.I. in

Manufacturing Systems," April 1989.

Colloquium Speaker: Drexel University, lectured on "Machine Learning: A New

Challenge for Control Engineers," May 1989.

Seminar Speaker: Firestone Company, lectured on "Active and Semi-Active Vibration

Isolators," February 1989.

Seminar Speaker: Johnson Control, lectured on "Intelligent Diagnostic Systems," April

1989.

Colloquium Speaker, Florida Atlantic University, lectured on "Intelligent Control for

Automated Assembly," April 1988.

Seminar Speaker: Decision and Control Lab., University of Illinois at Urbana, lectured

on "Active and Semi-Active Control of Flexible Structures," October 1987

Seminar Speaker: Department of Mechanical Engineering, Penn State University,

lectured on "Vision-Based Intelligent Control for Automated Manufacturing." November

1987.

1986 - Lecturer, Mitsubishi Electric Corporation, Central Research Laboratory, lectured

on "Active Control of Variable Structure Systems,", Hyogo, Japan, July 1986.

18

1986 - Lecturer, Japan Institute of Space and Astronautical Sciences, lectured on,

"Control of Distributed Parameter Systems with Application to MPD Engines,",

Mombusho, Japan, July 1986.

Seminar Speaker: Systems Measurement & Control Area, School of Mechanical

Engineering, Purdue University, April 30, 1986.

Colloquium Speaker: Aerospace & Mechanical Engineering Department, University of

Notre Dame, January 29, 1986.

VII. Educational and Research Interests

Intelligent Control Systems, Robotics and Mechatronics Engineering, Automation and

Artificial Intelligence; Bio-Inspired Systems; Smart Buildings & Structures, Active Noise and Vibration Control; Design of Advanced Biomedical Sensors and Devices;

Neuromorphic Engineering; Power and Energy Systems, Advanced Monitoring and

Diagnostics Systems; Mathematical Modeling and Simulation of Complex Thermofluid, Power Networks, and Electromechanical Systems.

VIII. Patents

US Patent 8,583,565 November 12, 2013, “Brain Imaging System and Methods for Direct

Prosthesis Control”

US Patent 8,457,705, June 4, 2013, “Brain Imaging System and Methods for Direct

Prosthesis Control”

US Patent 7,716,005, May 11, 2010, “Smart Insole for Diabetic Patients”

US Patent 7,437,934, October 21, 2008, “Self-Contained Apparatus for Inspection of

Electric Conductors”

US Patent 6,382,029, May 7, 2002, “Apparatus and Method for Utilizing Electromagnetic

Acoustic Transducers to Non-Destructively Analyze In-Service Conductive Materials”

US Patent 6,137,886, October 24, 2000, “Active Vibration Control Method and

Apparatus”

US Patent 5,629,986, May 13, 1997, “Method and Apparatus for Active and Semi-Active

Vibration Control”

US Patent 5,564,537, October 15, 1996, “Adaptive-Passive Vibration Control System”

US Patent 5,418,858, May 23, 1995, “Method and Apparatus for Intelligent Active and

Semi-Active Vibration Control”

19

IX. Research Proposals under Review

“Smart Wearable Technologies for Enhanced Vision and Mobility,” Co-PI with Dr. John

Ross Rizzo of NYU, submitted to NIH.

X. Awarded Research Grants

“Neurological System-Inspired Multifunctional Materials Design for Autonomous State

Awareness Against Exogenous Threats," in collaborations with Stanford University,

UCLA, CU-Boulder, and University of British Columbia, $7,500,000 (9/1/2009 to

8/31/2014), AFOSR-MURI.

“Bio-Inspired Sensor/Actuator Platform Using Hydrogels,” in collaborations with

Harvard and Johns Hopkins, $600,000 (9/1/2009 to 8/31/2011), NSF and AFOSR.

“US-Europe Partnership in Informatics for Bio-Inspired Design,” May 2010, Croatia,

$90,000, (9/15/2009 to 12/30/2011), NSF and AFOSR

“Adaptive Cast for Diabetic Patients,” State of Colorado Bioscience Grant, $100,000

(2/1/2010 to 5/30/2011)

“Biosensors, Bioactuators, and Bio-Inspired Systems,” NSF and AFOSR, $68,000

(3/1/2008 to 2/28/2009)

“Workforce Development in IT, Aerospace, and Biosciences Sectors” US Department of

Labor through Denver WIRED Initiative, $405,000, C. Lengsfeld, and Christian Grothoff

as Co-PI (3/1/2008 to 12/30/2009)

“Optical-Based Direct Brain Control of Prostheses,” NSF, CMMI, $298,000 (9/1/2007 to

8/31/2011)

“Feedforward and Feedback Direct Brain Control of Prostheses Using EMG, EEG, and

fNIR Signals,” State of Colorado Bioscience Grant, $80,000, (9/1/2008 to 8/31/2011).

“Innovative Partnership for STEM Workforce Development,” US Department of Labor

through Denver WIRED Initiative, $450,000 (10/1/2007 to 12/31/2008), C. Lengsfeld

Co-PI.

“Smart Systems for Mitigation on Exogenous Threats Using Autonomic Response,”

NSF/AFOSR/ONR joint workshop, $106,318 (3/1/06 to 12/31/07).

“Research Center on Assistive Technologies for Geriatrics,” sponsored by the

Department of Health and Human Services, $200,000 (8/1/2005 to 7/31/2006).

“Forisome-Based Sensory Nervous System for Civil Structures,” sponsored by NSF,

$180,000 (5/1/2005 to 4/30/2008).

20

“Frontiers in Simulation and Analysis of Dynamic Systems,” sponsored by NSF, $98,000

(2/1/2007 to 12/31/2008).

“USA-Europe Collaborative Research on Smart Structures and Sensor Technologies,”

sponsored by NSF, $140,000 (4/1/2005 to 3/31/2008).

“Us-Europe Cooperative Program on Smart Sensor Technologies and Informatics for

Civil Structures,” sponsored by NSF, $137,000 (2/15/05 – 1/31/08).

“Creation of National Forum for Synergistic Program Development in Smart Structures

and Sensor Technologies,” sponsored by NSF, $189,680 (9/1/03 – 6/1/06).

“Intelligent Monitorig System for High Voltage Transmission Lines,” sponsored by EPRI,

$250,000 (9/1/03 to 12/31/05).

“EMAT Conductor Inspection Technology,” sponsored by EPRI, $117,127 (8/1/03 –

12/31/06).

“Intelligent Haptic System for Exoskeletons,” sponsored by DARPA, $382,000, (8/1/03

to 12/31/05).

“Sensor Technologies and Smart Structures,” sponsored by NSF, $40,000 (8/1/03 to

12/31/04)

“Smart Structures and Advanced Sensor Technologies,” sponsored by NSF, $192,000,

(3/1/02 to 2/28/05).

“Optimal Control of Combined Heat & Power Systems,” sponsored by NISource Energy

Technology, $150,000 (8/1/02 to 2/28/05).

“Optical-Based Monitoring System for High Voltage Transformers,” sponsored by

WAPA, Tri-State G&T, $120,000, (6/1/02 to 12/31/03).

“Colorado Advanced Research Program in Bioscience and Bioengineering,” sponsored

by the State of Colorado, $500,000, (9/15/01 to 6/30/02).

“Optimal Control Design for Combined Heat and Power System in Smart Buildings,”

sponsored by DoE, NREL and NIPSCO, $400,000, (1/1/01 to 1/31/03).

“Intelligent Electric Power Substations,” sponsored by EPRI, WAPA, Tri-State G&T,

$250,000, (9/1/00 to 12/31/03).

“I/UCRC for Power System Engineering Research Center (PSERC),” second five-year

cycle, sponsored by NSF, $240,000, (9/1/00 to 8/31/03).

“Analytical and Experimental Evaluation of Substation Ground Integrity,” sponsored by

NIPSCO and EPRI Solutions, $30,000.00, (4/1/00 to 3/31/01).

21

“Enhanced Reliability and Power Quality through Intelligent Generation Control,”

sponsored by DoE and NIPSCO, $420,000, (3/21/00 to 3/20/03).

“Evaluation of Electro-Magnetic-Acoustic Transducers,” sponsored by EPRI, $17,300.00

(10/31/99 to 9/30/00).

“EMAT-Based Monitoring System for ACSR Transmission Lines,” WAPA, Tri-State,

Nebraska Public Service, Interconexion Electrica S.A., Columbia, Electric de France,

EPRI, $540,000, (9/1/99 to 9/31/02).

“Design of a Telemetric Patella,” Sponsored by CATI, $50,000, (8/15/99 to 8/14/00)

“Development of Intelligent Substation,” Sponsored by WAPA, EPRI, Tri-State,

$200,000, (8/1/99 to 9/31/01)

“Future Research Direction in Civil Infrastructure Systems,” sponsored by NSF, $42,000,

(11/1/98 to 8/31/99).

“Research for Minority Undergraduates,” sponsored by NSF, $30,000, (9/1/98 to

8/31/00).

"I/UCRC for Intelligent Biomedical Devices and Musculoskeletal Systems (IBDMS),"

sponsored by NSF, $425,000 (2/2/98 to 2/1/03).

“Fiber Optic-based Transformer Diagnostics,” Sponsored by Tri-State G&T, WAPA, and

EPRI, $190,000, (12/1/97 to 11/30/99).

“High Performance Actuator Design,” Sponsored by Cooper Tire and Rubber, $130,000,

(9/1/97 to 12/31/00).

"Monitoring and Health Assessment of Machinery, Processes and Products," sponsored

by the National Science Foundation (NSF) CRCD program, $422,000, (7/1/97 to

6/31/01).

“An In-Situ Nitric Oxide Sensor for Power Plant Emission Control,” with T. Parker and

M. Linne, sponsored by NSF and EPRI, $350,000. (10/1/95 to 9/30/98).

“Integrated Systems Approach to Infrastructure Education,” sponsored by NSF, $562,500,

(9/01/95 to 8/31/00).

“Intelligent Diagnostics for Health Monitoring of Ground Grid Risers,” sponsored by

Western Area Power Administration (WAPA) and EPRI, $150,000. (9/1/95 to 8/31/98).

“I/UCRC for Advanced Control of Energy and Power Systems (ACEPS),” sponsored by

NSF, $425,000, (8/31/95 to 3/1/99).

“Active Vibro-Acoustic Control System for Automotive Vehicles,” sponsored by Cooper

Tire and Rubber, $98,000. (8/1/95 to 12/31/96).

22

“Low Powered Actuators for Intelligent Control of Structures,” sponsored by NSF,

$129,000. (7/1/95 to 2/28/97).

“Power Quality and Automatic Generation Control,” sponsored by EPRI, $89,000.

(3/1/95 to 12/31/96).

"Optimal Power generation and transmission in the Presence of IPP's," Under ACEPS

Center, sponsored by Public Service Company of Colorado (PSCO), and EPRI, $250,000

(1/1/95 to 12/31/99).

"Identification of Harmonics and their Direction of Flow," under ACEPS Center,

sponsored by WAPA and EPRI, $250,000 (1/1/95 to 12/31/99).

“Intelligent Diagnostics for Electric Power Substations,” sponsored by WAPA, Kansas

Electric Utilities Research Program (KEURP), and EPRI, $100,000. (1/1/95 to 12/31/98).

“Development and Commercialization of Active Noise and Vibration Control,”

Sponsored by Cooper-Standards Automotive, $10,000,000 (10/1/94 to 12/31/99).

"Power Quality and Advanced Generation Control," sponsored by EPRI, NIPSCO, PSI,

KEURP, and EKP, $342,000 (12/1/93 to 12/31/95).

"Intelligent Automatic Generation Control," sponsored by Commonwealth Edison,

Chicago, $50,000 (12/1/93 to 12/31/94).

"Active Adaptive Vibro-Acoustic Control System for Automotive Vehicles," sponsored

jointly by Ford Motor Co. and Cooper Tire, $160,000 (9/1/93 to 2/28/96).

"Intelligent Structures and Control Systems," sponsored by NSF, $242,000 (7/1/93 to

6/30/96).

"Intelligent Automatic Generation Control and Power Quality," sponsored by EPRI,

$338,000 (12/15/91 to 6/1/94).

"Intelligent Machines for Automated Assembly," sponsored by NSF-ERC, $198,000

(8/1/91 to 1/31/94).

"Feasibility Study of Active Noise Control for Aircraft Engines," sponsored by NASA,

$85,500 (5/1/91 to 2/28/93).

"Autonomous Underwater Vehicles," Office of Naval Research, jointly with Prof. Healey

at Naval Postgraduate School, Monterey, CA, $64,000 (4/1/91 to 8/31/92).

"NSF-EPRI Workshop on Intelligent Control Systems," sponsored by NSF, $45,856

(9/1/90 to 2/29/92).

23

"Intelligent Automatic Generation Control System for Northern Indiana Public Service

Company Generating Units," sponsored by NIPSCO, $298,847 (1/1/90 to 12/31/93).

"Neural Network Based Control of Complex Systems," sponsored by NSF, $108,000

(8/1/88 to 6/1/91).

"Integrated Control Systems for Intelligent Buildings," sponsored by NSF, $280,000

(1/1/88 to 12/31/90).

"Dynamic Analysis and Control of Hybrid Stepping Motors," sponsored by NSF, $90,000

(9/1/87 to 8/31/90).

"Electronically Controlled Adaptive Hydraulic Engine Mounts," sponsored by Cooper

Tire and Ford Motor Company, $303,500 (9/1/84 to 12/31/90).

"Intelligent Control and Actuator Design for Vision Guided Automated Assembly Cell,"

Purdue/NSF Engineering Research Center on Intelligent Manufacturing, $255,200 (9/1/86

to 8/31/90).

"Model Reference Adaptive Steam Temperature Control of an Electric Power Plant,"

sponsored by Link Foundation, $14,000 (7/1/86 to 6/30/87).

"Real-Time Adaptive Control of Manipulators with Uncertain Dynamics Using Optical

End-Effector Sensing," David Ross Grant, Purdue University, $13,200 (1986,1987).

"Diagnostics for Intelligent Adaptive Control of Propulsion Systems," sponsored by Air

Force Office of Scientific Research (AFOSR), $264,000 (9/29/85 to 9/28/88).

"Adaptive, Real time Control for Three-Dimensional Active Attenuation of Sound,"

sponsored by NSF, $191,334 (9/1/85 to 8/31/87).

"Microprocessor-Based Intelligent Failure Diagnostic Systems," sponsored by Whirlpool

Corporation, $311,785 (1/1/85 to 8/31/89).

"Feasibility of Three Dimensional Active Attenuation of Sound," David Ross Grant,

sponsored by Purdue University, $13,200 (1985, 1986).

"Application of Modern Technologies for Enhancement of Sound-Powered Telephone Performance," sponsored by Hose-McCann Telephone Company, $57,646 (6/1/84 to

12/31/85).

"Adaptive, Digital Control of Coal Fired Power Plants in Minimum Load Conditions,"

sponsored by Commonwealth Edison, Chicago, $30,000 (9/1/83 to 6/30/86).

XI. Books and Book Chapters

R. Shoureshi, “Introduction to Bioengineering,” Prentice Hall, Book Chapter, December

2004.

24

R. Shoureshi, “Electro-Magnetic Acoustic Transducers (EMAT)” EPRI’s Advanced

Sensor Technology book, published in 2000.

R. Shoureshi, M. Franke, “Engineering Systems,” ASME publication, G 01042, Nov.

1996.

R. Shoureshi, “Intelligent Control Systems,” chapter 10 of the book entitled “Advanced

Control Systems” IEEE/EAB publication, December 1995.

R. Shoureshi, M. Wheeler, L. Brackney. “Applied Intelligent Control Systems,” chapter 5

of the book entitled, “Applied Intelligence in Industrial Decision Making, Control and

Automation,” Klower Academic Publishers, 1995.

R. Shoureshi, “Self-Study on Modern Control Systems,” IEEE publication, pp. 91-94,

1995.

Co-editor and co-author of a book entitled “Active Control of Vibration and Noise,”

ASME Publication G00897, DE- Vol. 75, 1994.

Editor and co-author, "Active Vibration and Noise Control," proceedings of the ASME

Symposium, November 1994

R. Shoureshi, "Variable Structure and Learning Controls for Robotic Manipulators," in

the book entitled "Variable Structure Control for Robotics and Aerospace Applications,

No. 10, Elsevier, pp. 211-246, November 1993.

"Intelligent Control Systems," Editor and co-author, ASME publications No. G00764,

November 1992.

R. Shoureshi, "A Framework for Intelligent Structures," in the book entitled "Structural

Control and Intelligent Systems," USC publication, July, 1992.

R. Shoureshi, R. Chu, M. Tenorio, "Neural Networks for System Identification," in the

book entitled "Artificial Neural Networks, Concepts and Control Applications," IEEE

Computer Society Press, pp. 492-496, 1992.

"Intelligent Control Systems" Editor and co-author, ASME publications, November 1990.

R. Shoureshi, K. Rahmani, V. VanDoren, "Intelligent Building Control Systems," in the

book entitled "Intelligent Structures," published by Elsevier, November 1990.

"Intelligent Control Systems," Editor and co-author, ASME publication H00549,

November 1988.

"Intelligent Control," Editor and co-author, ASME publication G00382, November 1987.

25

"Dynamic and Control of Thermofluid Processes and Systems," Editor and chapter

author, ASME publication G00282, November 1986.

"Modeling and Control of Robotic Manipulators and Manufacturing Processes," Editor,

ASME publication G00383, November 1987.

XII. Refereed Publications

A. Archival Journal Articles

Rahmat A. Shoureshi, Christopher M. Aastad, “Wearable Hybrid Sensor Array for Motor Cortex Monitoring,” Periodical of Advances in Science and Technology Vol. 85 in 2013 entitled Wearable/Wireless Body Sensor Networks for Healthcare Applications.

Rahmat A. Shoureshi, Sun Lim, “Bio-Inspired Nervous System for Civil Structures,”

Journal of Smart Structures and System, Vol. 5, No. 2, 2009.

Robin Murphy, Jeffery Kravitz, Sam Stover, Rahmat Shoureshi, ”Robot-Assisted

Underground Mine Rescue,” published in the IEEE Robotics and Automation Magazine,

March 2009.

M. Tomizuka, L. Bergman, B. Shapiro, R. Shoureshi, B.F. Spencer, Jr. , and M. Taya,

“Bio-inspired Autonomous Engineered Systems,” Journal of Smart Structures and

Systems, Vol. 3, No.4, 2007.

Rahmat A. Shoureshi, Amy Q. Shen, “Design of a Biomimetic-Based Monitoring and

Diagnostic System for Civil Structures,” Int. J. Nanotech., Vol. 4, No. 3, 2007.

Rahmat A. Shoureshi, “Introduction to Bioengineering: Melding of Engineering and

Biological Sciences,” Otolaryngologic Clincs of North America, 38 (2005) 185-197.

Steven D. Glaser, Rahmat A. Shoureshi, and David Pescovitz, “Frontiers in Sensors and

Sensing Systems,” Smart Structures and Systems, Volume 1, Number 1, January 2005.

Rahmat A. Shoureshi, Sun-Wook Lim, Eli Doley, Benny Sarusi, “Electro-Magnetic- Acoustic Transducers for Automatic Monitoring and Health Assessment of Transmission

Lines”, ASME Journal of Dynamic Systems, Measurement and Control, June 2004, Vol. 126, No. 2.

S. C. Liu, M. Tomizuka, R. A. Shoureshi, “Strategic Research for Sensors and Smart

Structures Technology”, International Journal of Smart Materials and Structures, June

2004.

S.A. Ottele, R. Shoureshi, "Neural Network-Based Adaptive Monitoring System for

Power Transformer", ASME Journal of Dynamic Systems, Measurement and Control,

Vol. 123, pp. 512-517, September 2001.

26

L.R. Hagaman, S.F. Albert, and R. Shoureshi, “LEAP Program Monofilaments: Can They

Be Used as an Accurate Diagnostic Tool?” International J. of Foot Medicine, Dec. 2000.

R. Shoureshi, R. Komistek, "Smart Implants May Soon Be A Reality", The Denver

Business Journal, August 1998.

R. Shoureshi, T. Knurek, “Automotive Applications of a Hybrid Active Noise and

Vibration Control,” IEEE Control System, Vol. 16, No. 6, December 1996.

R.A. Shoureshi, M.E. Franke, “Engineering Systems Face the Future,” ASME

Mechanical Engineering, Vol. 118, No. 11, November 1996.

R.A. Shoureshi, R.D. Hanson, H.H. Roger, C.A. Shinozuka, H.A. Smith, “Role of

Intelligent Material Systems and Structures”, J. of Intl. Materials Systems And Structures,

Vol. 6, No.1, pp. 3-12, January 1996.

R. Shoureshi, M. Wheeler, L. Brackney, “Applied Intelligent Control Systems,” J. of

Artificial Intelligence, pp. 101-126, Klower Academy, September 1995.

G.T. Heydt, D. Karipides, R. Shoureshi, M. Wheeler, “Active and Reactive Power Flow

for Multi-area Systems AGC,” IEEE Journal of Electric Machines and Power Systems,

1995.

R. Shoureshi, L. Brackney, G.R. Batta, “A Modern Control Approach to Active Noise

Control,” ASME J. of Dynamic Systems, Measurement and Control, Vol. 115, No. 1, pp.

673-678, January 1995.

R. Shoureshi, M. Bell, D. Alves, “Intelligent Control and Actuators for Structures,”

published in Smart Materials and Structures, Institute of Physics, England. No. 4, pp.

A132-A139, 1995.

J. Wagner, R. Shoureshi, “Modeling and Observer Design for nonlinear Thermofluid

Systems,” Intl. J. of Modeling, Vol. 13, No. 1, pp.39-45, January 1994.

R. Shoureshi, L. Brackney, G.R. Batta, "A Modern Control Approach to Active Noise

Control," ASME J. of Dynamic Systems, Measurement and Control, Vol. 115, No. 4, pp.

673-678, December 1993.

J. Wagner, R. Shoureshi, "Modeling and Observer Design for Nonlinear Thermofluid

Systems," Intl. J. of Modeling, Vol. 13, No. 1, pp. 39-45, December 1993.

R.Shoureshi, J. Wagner, "A Failure Isolation Strategy for Thermofluid System

Dynamics," ASME J. of Engineering for Industry, Vol. 115, No. 4, pp. 459-465,

December 1993.

27

R. Shoureshi, "Intelligent Control Systems: Are They for Real?" Special 50th

Anniversary issue of the ASME J. of Dynamic Systems, Measurement and Control, Vol.

115, No. 2(B), pp. 392-401, June 1993.

J. Wagner, R. Shoureshi, "Failure Detection Diagnostics for Thermofluid Systems,"

ASME J. of Dynamic Systems, Measurement and Control, Vol. 114, pp. 699-706,

December 1992.

R. S. Chu, R. Shoureshi, "Identification of Dynamical Systems Using Neural Networks,"

the IMACS Transactions, June 1992.

J. Wagner, R. Shoureshi, "A Robust Failure Diagnostic System for Thermofluid

Processes," Automatica, the IFAC Journal,Vol. 28, No. 2, pp. 375-381, March 1992.

R. Shoureshi and R. Chu, "Applications of Neural Networks in Learning of Dynamical

Systems," The IEEE Systems, Man and Cybernetics, Vol. 22, No. 1, pp. 160-164,

January/February 1992.

R. Shoureshi, K. Rahmani, "Derivation and Application of an Expert Fuzzy Optimal

Control System," the Intl. J. for Fuzzy Sets and Systems, Vol. 49 pp. 93-101, 1992.

R. Shoureshi, "Learning and Decision Making in Intelligent Control Systems," IEEE

Control Systems Magazine, Vol. 11, No.1, January 1991.

R. Shoureshi, D. Swedes, R. Evans, "Learning Control for Autonomous Machines,"

International J. of Robotica, Vol. 8, Part 3, July/Sept. 1990.

R. Shoureshi, S.R. Chu, M.F. Tenorio, “Neural Networks for System Identification,”

IEEE Control Systems Magazine, Vol. 10, No.4, April 1990

R. Shoureshi, P. Graf, "Gain Sensitivity Augmentation for Near Optimal Control of

Parameter Dependent Systems," AIAA J. of Guidance and Control, Vol. 13, No. 2, pp.

310-320, March/April 1990.

R. Shoureshi, R. Evans, W. Stevenson, "Optically-Driven Learning Control for Industrial

Manipulators," IEEE Control Systems Magazine, Vol. 9, No. 6, pp. 21-26, October 1989.

R. Shoureshi, M. Momot, R. Mitchell, J. Feddema "Vision-Based Intelligent Control for Automated Assembly," J. of Intelligent & Robotic Systems, Vol. 2, pp. 153-170, October

1989.

J. Dohner, R. Shoureshi, "Active Noise Control Using Source Point Model," J. of

Acoustical Society of America, Vol. 86, No. 3, pp. 1053-1059, September 1989.

J. Dohner, R. Shoureshi, "The Modal Control of Acoustic Plants," ASME J. of

Vibrations, Acoustics, Stress, and Reliability in Design, Vol. III., No. 3, pp. 326-330, July

1989.

28

R. Shoureshi, "On Passive Implementation of Feedback Control Systems," ASME J. of

Dynamic Systems, Measurement and Control, Vol. III., No. 2, pp. 339-342, June 1989.

R. Shoureshi, R. Evans, "Gaining Control Over a Manipulator," ASME publication,

Mechanical Engineering, Vol. 111, No. 6, June 1989.

R. Shoureshi, F. Pourki, "Lyapunov Approach to Stability Analysis of Nonlinear

Distributed MPD Engine," the AIAA J. of Guidance, Control and Dynamics, Vol. 12, No.

5, pp. 757-760, September/October 1989.

P. Graf, R. Shoureshi, "Modeling and Implementation of Semi-Active Hydraulic Engine

Mounts." ASME J. of Dynamic Systems, Measurement and Control, Vol. 110, No. 4, pp.

422-429, December 1988.

R. Shoureshi, M. D. Roesler, M. J. Corless, "Control of Industrial Manipulators with

Bounded Uncertainties." ASME J. of Dynamic Systems, Measurement and Control, Vol.

109, pp. 53-59, March 1987.

R. Shoureshi, D. Carey, "Design and Implementation of a Solar-Powered Active Filter."

the International J. of Mechanical Engineering Vol. 15, No. 3, pp. 182-192, 1987.

R. Shoureshi, P. Graf, T. Houston, "Adaptive Hydraulic Engine Mounts." Transactions of

Society of Automotive Engineers, December 1987.

R. Shoureshi, K. McLaughlin, "Entropy-Volume Plane: A New Approach to On-Line

Calculation of Refrigerant Properties." The International Journal of Refrigeration, Vol.

10, No. 6, November 1987.

R. Shoureshi, D. Carey, "Bond Graph Modeling of an Electro-acoustic Transducer." The

Journal of The Franklin Institute, Vol. 323, No. 1, pp.73-88, 1987.

J. Dohner, R. Shoureshi, and R. Bernhard, "Transient Analysis of Three Dimensional

Wave Propagation Using the Boundary Element Method," Intl. J. for Numerical Methods

in Engineering, Vol. 24, pp. 621-634, 1987.

R. Shoureshi, D. Carey, "Modeling of Coupled Systems Using Bond Graphs." Intl. J. of

Modeling and Simulation, Vol. 7, No. 1, pp. 15-19, 1987.

R. Shoureshi, K. McLaughlin, "Extended Kalman Filter for Reconstruction of a

Nonlinear Thermofluid System," ASME J. of Dynamic Systems, Measurement and

Control, Vol. 108, pp. 156-158, June 1986.

R. Shoureshi, K. McLaughlin, "Applications of Bond Graphs to Thermofluid Processes

and Systems," ASME J. of Dynamic Systems, Measurement and Control, Vol. 107, pp.

241-245, December 1985.

29

H.M. Paynter, R. Shoureshi, "Introduction to Dynamics and Control of Thermofluid

Processes and Systems," ASME J. of Dynamic Systems, Measurement and Control, Vol.

107, pp. 230-232, December 1985.

R. Shoureshi, K. McLaughlin, "Analytical and Experimental Investigation of Flow-

Reversible Heat Exchangers Using Temperature-Entropy Bond Graphs," ASME J. of

Dynamic Systems, Measurement and Control, Vol. 106, pp. 170-175, June 1984.

B. Other Refereed Publications

Chris Aasted, Rahmat Shoureshi, Ma Lu, “Neoro-Symbolic Networks for Global

Diagnostics of Complex Systems,” 2014 CIMTEC Conference, June 2014, Italy.

Chris Aasted, Rahmat Shoureshi, Sun Lim, “Vehicle Health Inferencing Using Feature-

Based Neural-Symbolic Networks,” Proceedings of 2013 ASME Dynamic Systems and

Control Conference, October 20-23, 2013, Stanford.

Rahmat Shoureshi, Sun Lim, Chris Aasted, “Reconfigurable Hybrid Control System for

Aerospace Vehicles,” Proceedings of 2013 ASME Dynamic Systems and Control

Conference, October 20-23, 2013, Stanford.

Chris Aasted, Rahmat Shoureshi, Benny Sarusi, “Hybrid Non-Invasive Sensor System for

Direct Brian Control of Artificial Limbs,” Proceedings of the 2010 ASME Dynamic

Systems and Control Conference, September 12 -14, 2010, Cambridge.

Rahmat Shoureshi, Virdi Permana, “Controllability and Observability of Large-Scale

Nonlinear Thermofluid Systems,” Proceedings of the 2010 ASME Dynamic Systems and

Control Conference, September 12 -14, 2010, Cambridge.

Virdi Permana, Rahmat Shoureshi, “Optimal Energy Control of Large Scale Building

Systems,” Proceedings of the 2009 ASME Dynamic Systems and Control Conference,

October 12-14, 2009, Hollywood, CA.

Rahmat Shoureshi, Sun Lim, “Bio-Inspired Smart Structures,” Proceedings of the 2009

SPIE Conference on Smart Structures, March 2009, San Diego.

Rahmat Shoureshi, Virdi Permana, “Next Generation of Aerospace Structures,”

Proceedings of the 3rd

Mediterranean Control Conference, March 2009, Tunis.

Virdi Permana, Rahmat Shoureshi, “Observability of Commercial Buildings for Energy

Optimization,” Proceedings of the International Dynamics and Control Conference, May

2009, Barcelona.

Rahmat A. Shoureshi, Virdiansyah Permana and Mohammad B. Khayani, “Intelligent

Control of Energy Usage in Commercial Building,” Proceedings of the 2006 ASME

International Mechanical Engineering Congress and Exposition, Nov. 2006, Chicago.

30

Rahmat A. Shoureshi, Sun-Wook Lim, “Smart Diagnostic System for High Voltage

Electric Transmission Lines,” Proceedings of the 2006 ASME International Mechanical

Engineering Congress and Exposition, Nov. 2006, Chicago.

Sun-Wook Lim, Rahmat A. Shoureshi, “Intelligent Monitoring System for Automatic

Assessment of Electric Power Infrastructure”, Proceedings of 2006 International

Symposium on Flexible Automation, Osaka, Japan, July 2006.

Rahmat A. Shoureshi, Amy Shen, “Forisome-Based Nano Sensors and Actuators,”

Proceedings of ASME Energy Nanotechnology International Conference, MIT,

Massachusetts, June 26-28, 2006.

Rahmat A. Shoureshi, Amy Shen, “Nano Structural Nerve System Using Forisomes,”

Proceedings of the 4th

Annual NanoMaterials for Defense Application Symposium, Virginia Beach, Virginia, May 1-4, 2006.

Rahmat A. Shoureshi, Amy Shen, “Self-powered sensory nerve system for civil structures

using hybrid forisome actuators”, presented at SPIE 5908, San Diego, California,

February 2006.

Sun-Wook Lim, Rahmat A. Shoureshi, “Advanced Monitoring System for Integrity

Assessment of Electric Power Transmission Lines,” presented at American Control

Conference, Minneapolis, Minnesota, June 2006.

Rahmat A. Shoureshi, Naqib Hussain, Amy Shen, “Conceptual Design of a Nervous

System for Control, Monitoring and Diagnostics of Civil Structures,” presented Bejing,

China, October 2005.

Rahmat A. Shoureshi, Amy Q. Shen, “Design of a Biomimetic-Based Monitoring &

Diagnostic System for Civil Structures,” Keynote lecture, proceedings of DARPA

sponsored workshop on nanomaterials, Greece, May 2005.

“Optical Sensor for Monitoring of Vigh-Voltage Electric Transformers,” presented at

SPIE 5907, San Diego, California, August 2005.

“Fiber Bragg Sensor for Smart Bed Sheet,” presented at SPIE 5907, San Diego,

California, August 2005.

Rahmat A. Shoureshi, Sun W. Lim, Amir Chaghajerdi, “Hybrid Control, Optimal Sensor

Locations, and Informatics,” Proceedings of Smart Structures Technologies and

Earthquake Engineering (SE04), Osaka, Japan, July 2004.

Rahmat Shoureshi, Tim Norick, Ryan Swartzendruber, “Intelligent Transformer

Monitoring System Utilizing Neuro-Fuzzy Technique Approach,” PSERC Publication

04-26, July 2004.

Rahmat Shoureshi, Virdiansyah Permana, Robert Wood, Ryan Swartzendruber, Marcelo

Simoes, “Smart Sensor Project,” PSERC Publication 04-27, July 2004.

31

Sun-Wook Lim, Rahmat A. Shoureshi, “Transducer Design and Neural Signature

Analysis for Diagnosis of Energized Transmission Lines,” Proceedings of the American

Control Conference, v4, 2004, pp. 3735-3740.

Rahmat A. Shoureshi, Sun-Wook Lim and Michael Chenoweth, “Electro-magnetic-

acoustic transducers for automatic monitoring and health assessment of transmission

lines.” Proceedings of American Society of Mechanical Engineers, Dynamic Systems

and Control Division (DSC), v72, n2, 2003, pp. 1151-1157.

Sun-Wook Lim, Rahmat A. Shoureshi, “Neural-Based Monitoring System for Health

Assessment of Electric Transmission Lines,” Proceedings of 2003 American Control

Conference, v3, 2003, pp. 2270-2275.

Rahmat A. Shoureshi, Amir H. Chaghajerdi, “Active Noise Control Systems with

Random Excitations,” Proceedings of 2003 ASME International Mechanical Engineering

Congress, November 2003.

Amir H. Chaghajerdi, Rahmat A. Shoureshi, “Analysis, Design, and Implementation of

ActiveVibro-Acoustic Control Systems with Random Excitations,” Proceedings of 2003

American Control Conference, June 2003.

Dr. Rahmat Shoureshi, Tim Norick, David Linder, John Work, “Electric Power

Transformer Diagnostics Using Neural-Based Observer,” Proceedings of 2003 American

Control Conference, June 2003.

Benjamin Hoffner, Rahmat A. Shoureshi, R.A. Kramer, “Development of an Intelligent

Automatic Generation Control System for Electrical Power Plants,” Proceedings of

ASME International Mechanical Engineering Congress & Exposition, November 2002.

Benjamin Hoffner, Rahmat A. Shoureshi, R.A. Kramer, “Feedforward Neural Fuzzy

Control of Electrical Power Systems Containing Highly Varying Loads”, Proceedings of

2002 American Control Conference, May 2002.

Rahmat A. Shoureshi, Benjamin Terry, “Neural-Based Remote Health Assessment and

Failure Diagnostics,” Proceedings of 2001 ASME International Mechanical Engineering

Congress and Exposition, November 2001.

R. Shoureshi, B. Hoffner, R. Kramer, “Intelligent Automatic Generation Control in the

Presence of Highly Varying Loads,” Proceedings of IEEE Power Tech Conference,

September 2001, Porto, Portugal.

Tor Fretheim, Tyrone L. Vincent, Rahmat Shoureshi, “Optimization Based Fault

Detection for Nonlinear Systems,” Proceedings of 2001 American Control Conference,

June 2001

32

R.A. Shoureshi, B. Terry, “Applications of World Wide Web in Teaching Large Scale

Machinery Diagnostics, Proceedings of the 2000 ASME International Mechanical

Engineering Congress and Exposition, November 2000.

Hoffner, R. Shoureshi, R. Kramer, “Fuzzy Control of Electric Power Generation,”

Proceedings of the ASME-DSC Division, IMECE 2000, Nov. 2000.

T. Fretheim, R. Shoureshi, T. Vincent, “Diagnostics of Nonlinear Systems Using Output

Observers,” Proceedings of the ASME-DSC Division, IMECE 2000, Nov. 2000.

B. Terri, R. Shoureshi, “Internet-Based Monitoring and Diagnostics,” Proceedings of the

ASME-DSC Division, IMECE 2000, Nov. 2000.

R. Shoureshi, H. Li, "Design of Advanced Feedback Control for Electric Power

Generation System", Proceedings of the 2000 American Control Conference, Chicago,

June 2000.

R. Shoureshi, Z. Hu, “Tsukamoto-Type Neural Fuzzy Inference Network”, Proceedings

of the 2000 American Control Conference, Chicago, June 2000.

T. Fretheim, R. Shoureshi, T. Vincent, “A General Approach to Non-Linear Output

Observer Design Using Neural Models”, Proceedings of the 2000 American Control

Conference, Chicago, June 2000.

R. Shoureshi, A. Chaghajerdi,”Optimal Placement of Sensors and Actuators in

Distributed Parameter Systems”, Proceedings of the DSCD-IMECE, Nashville, Tenn.,

November 14-19, 1999.

R. Shoureshi, A. Ottele, J. Work, “Neural Network-Based Diagnostics of Power

Transformers”, Proceedings of the DSCD-IMECE, Nashville, Tenn., November 14-19,

1999.

R. Shoureshi, H. Karkosch, F. Svaricek, “Automotive Applications of Active Vibration

Control”, Proceedings of the 1999 European Control Conference, Karlsrule, Germany,

August 31st

– September 3, 1999.

R. Shoureshi, T. Fretheim, “Predictive Maintenance: A First Step Toward Intelligent

Substations”, Proceedings of EUCI Reliability Centered Maintenance Conference, Denver, CO, August 26-27, 1999.

R. Shoureshi, M. Bell, “Active Control of Civil Structures with Application to Bridges”,

Proceedings of the American Control Conference (ACC-1999), San Diego, CA., June 2-

4, 1999.

R. Shoureshi, J. Vance, H. Karkosch, F. Svaricek, “Active Vibration Control for

Enhanced Automotive NVH Characteristics”, proceedings of the Adaptronic Congress,

Potsdam, Germany, March 1-4, 1999.

33

A. Ottele, R. Shoureshi, D. Torgerson, J. Work, “Hopfield-Based Monitoring System for

Electric Transformers”, Proceedings of the 32nd

Substation Diagnostic Conference, New

Orleans, February 22-24, 1999.

R.A. Shoureshi, L.A. Brakney, “Fuzzy Energy Management System for Large Buildings,”

Proceedings of the ASME Dynamic Systems and Control (DSCD), November 1996.

J.A. Edwards, R.A. Shoureshi, “Object Recognition Using Geometric Hashing

Technique,” Proceedings of the ASME Dynamic Systems and Control (DSCD),

November 1996.

R. Shoureshi, T. Knurek, M. Wheeler, “Active Control of Vehicle Interior Noise,”

Proceedings of the ASME Active Vibration and Noise Symposium, November 1996.

R.A. Shoureshi, M.J. Bell, “Active Control of Cable-Stayed Bridges,” Proceedings of the

NSF Structural Control Workshop, October 1996.

Shoureshi, R.A., “Intelligent Control Systems,” Track Q, No. 6, IFAC World Congress,

Symposium Panel, July 1996.

R. A. Shoureshi, “Sensory System and Intelligent Control for Electric Power Plants,” Vol.

7, No. 1, IFAC World Congress, July 1996.

R.A. Shoureshi, G. Alves, M.J. Bell, “Hybrid Control of Cable-Stayed Bridges,”

Proceedings of the IFAC World Congress, July 1996.

R.A. Shoureshi, M.J. Bell, “Active and Semi-Active Control of Structures,” Proceedings

of the American Society of Civil Engineers, May 1996.

R.A. Shoureshi, J. Gosink, N. Middleton, “A Curriculum for Engineering Systems”,

Proceedings of the ASME-IMECE, Go1042, pp. 1-10, 1996.

R. Shoureshi, M. Bell, “Implementation Issues Related to Active Control of Structural

Vibration,” proceedings of ASME-IMECE, Special Symposium on Active Noise and

Vibration, November 1995.

R. Shoureshi, T. Knurek, D. Alves, “Piezo-Based Active Noise Control of Enclosures,”

proceedings of ASME-IMECE, November 1995.

R. Shoureshi, D. Alves, T. Knurak, D. Novotny, L. Ogundipe, “Active Vibration Control

of Automotive Systems,” International Symposium on Advanced Automotive

Technology, Mechatronics Vol., Stuttgardt, Germany, September 1995.

M. Bell, R. Shoureshi, “Active Vibration Control of Structures Using Smart Actuators,”

proceedings of ASME Vibration Conference, Boston, Mass., September 1995.

34

R. Shoureshi, M. Bell, D. Alves, M. Wheeler, “Implementation of Active Control

Systems,” American Control Conference (ACC-1995), Seattle, WA, Vol. V, June 1995.

R. Shoureshi, M. Bell. A. Smith, “Active Control of Cable Stayed Bridges,” annual

meeting of the American Society of Civil Engineers, Vol. III, May 1995.

R. Shoureshi, M. Bell, “Intelligent Control of Structures,” invited paper for the NSF

Workshop on Natural Hazard Mitigation, Lake Tahoe, April 1995.

R. Shoureshi, L. Brackney, “Fuzzy-Based Self-Organizing Control for Building

Systems,” Control Conference (ACC-1994), Vol. 3, pp. 3060, 1994.

R. Shoureshi, P. Meckl, “Teaching Microprocessors in the 90’s and Beyond,” American

Control Conference (ACC-1994), Vol. 1, pp. 674-678, 1994.

R. Shoureshi, G. Alves, “Active Noise Control: A Marriage of Acoustics and Control,”

American Control Conference (ACC-1994), Vol. 3, pp.3444-3448, 1994.

S.R. Chu, R. Shoureshi, “Neural-Based Identification of Dynamic Systems, “ 1994 IFAC

Symposium on SYS-ID, Vol. 2, pp. 331-335, 1994.

R. Shoureshi, M. Bell, “Neural-Based Intelligent Control of Structures, “ First World

Congress on Intelligent Structures, Vol.1, August 1994.

D. Alves, R. Shoureshi, T. Knurek, L. Ogundipe, “Active Vibro-Acoustic Control Using

Smart Materials, “ ASME Winter Annual Meeting, Special Publication No. G00897, DE-

Vol. 75 pp.51-56, 1994.

R. Shoureshi, L.A. Cardoso, “Fuzzy Pattern Analysis Using Unsupervised Neural

Network Clustering, “ XIV Congress on Computation, Brazil, pp.117-124, August 1994.

M. Wheeler, R. Shoureshi, “Fuzzy Driver on a Handling Track,” ASME Winter Annual

Meeting, Special Publication No. G0909A, Vol.1, 1994.

R. Shoureshi, “Microprocessor-Based Electromechanical Systems, A First Step Toward

Mechatronics,” First Workshop on Mechatronics, Stanford University, July 1994.

J. Edwards, R. Shoureshi, "Object-Recognition Using Geometric Hashing," Proceedings

of IEEE Control and Decision Conference, December 1993.

M. Wheeler, R. Shoureshi, G.T. Heydt, R. Kramer, "Intelligent Power Generation

Control," ASME Winter Annual Meeting, November 1993.

R. Shoureshi, P. Meckl, "Teaching Microprocessors in the 90's and Beyond," ASME

Winter Annual Meeting, paper No. 93WA/DSC-ll, November 1993.

35

R. Chu, R. Shoureshi, "Neural-Based Identification of Continuous Nonlinear Systems,"

Proceedings of the 1993 American Control Conference, Vol. 2 pp. 1440-1449, pp. 1240-

1245 San Francisco, CA, June 1993.

P. Meckl, R. Shoureshi, "Laboratory Project in Semi-Active Vibration Control,"

Proceedings of the 1993 American Control Conference, Vol. 2, pp. 1240-1243, San

Francisco, CA, June 1993.

R. Shoureshi, P. Torcellini and K. Ramani, "Derivation and Implementation of Fuzzy

Optimal Climate Control, Proceedings of the American Control Conference, Vol. 2, pp.

1860-1869, San Francisco, CA, June 1993.

R. Shoureshi, S.R. Chu, "Hopfield-Based Adaptive State Estimators," Proceedings of the

IEEE 1993 International Conference on Neural Networks, pp. 1860-1865, San Francisco, CA, March 1993.

R. Shoureshi, R. Chu, "Hopfield-Based Adaptive Observers: Next Generation of

Luenberger State Estimators," Proceedings of the 12th IFAC World Congress, Vol. 9, pp.

359-362, Sydney, Australia, July 1993.

P. Meckl, R. Shoureshi, "Real-Time Microprocessor Control Laboratory," Proceedings of

the 12th IFAC World Congress, Vol. 9, pp. 155-158,Sydney, Australia, July 1993.

R. Shoureshi, L. Brackney, "Active Noise Control Using Self-Tuning Regulators," ASME

Book NO. G00737, pp. 121-125, November 1992.

S. Reynold Chu, R. Shoureshi, "Neural-Based Adaptive Nonlinear System Identification,"

DSC-Vol. 45, Intelligent Control Systems, ASME-WAM, pp. 55-62, November 1992

R. Shoureshi, P. Torcellini and K. Rahmani, "Intelligent Occupant Comfort Control

System," DSC-Vol. 45, Intelligent Control Systems, ASME-WAM, pp. 105-111,

November 1992.

R. Shoureshi, P. Meckl, "Control Education in the Era of Microprocessors," Proceedings

of the American Control Conference (ACC-1992), pp. 455-459, Chicago, IL, June 1992.

R. Shoureshi, P. T. Torcellini, M. G. Wheeler and R. A. Kramer, "Intelligent Control of Large Scale Systems" Proceedings of the American Control Conference (ACC-1992), pp.

1308-1312, Chicago, IL, June 1992.

R. Chu, R. Shoureshi, T. A. Healey, "A Hopfield-Based Neuro-Diagnostic System,"

Proceedings of the American Control Conference (ACC-1992), pp. 2629-2633, Chicago,

IL, June 1992.

S. R. Chu, R. Shoureshi, "Neural-Networks for Learning of Dynamical Systems,"

Proceedings of the International Conference on Engineering Applications of Mechanics,

Vol. 1, pp. 121-131, Tehran, June 1992.

36

M. Momot, R. Shoureshi, "Vision-Based Intelligent Control for Automated Robotic

Assembly," Proceedings of the International Conference on Engineering Applications of

Mechanics, Vol. 1, pp. 247-257, Tehran, June, 1992.

R. Shoureshi, L. Brackney, "Active Noise Control Using Self-Tuning Regulators,"

Proceedings of the International Conference on Engineering Applications of Mechanics,

Vol. 1, pp. 414, 426, Tehran, June 1992.

R. Shoureshi, "Active and Semi-Active Vehicle Vibration Control," Proceedings of the

International Conference on Engineering Applications of Mechanics, Vol. 2, pp. 169-182,

Tehran, June 1992.

R. Shoureshi, Y. Matsuyoshi, "Design and Implementation of Self-Turning Regulators for

Active Noise Control," Proceedings of ASME International Computers in Engineering Conference, Santa Clara, CA., August 1991.

M. Momot, R. Shoureshi, "Intelligent Dynamic Error Recovery for an Automated

Assembly Work Cell," Proceedings of the 13th IMACS World Congress, , Vol. 3, pp.

1368-1369, Dublin, Ireland, July 1991.

R. Chu, R. Shoureshi, "Identification of Dynamical Systems Using Neural Networks,"

Proceedings of the 13th IMACS World Congress, Vol. 3, pp. 1375-1376, Dublin, Ireland,

July 1991.

R. Shoureshi, N. Kubota, "Microprocessor-Based Control Systems: A First Step in

Teaching Mechatronics," Proceedings of the IFAC symposium on Advances in Control

Education, Boston, MA, June 1991.

R. Chu, R. Shoureshi, "A Neural Network Approach for Identification of Continuous-

Time Nonlinear Dynamic Systems," Proceedings of the 1991 American Control

Conference, pp. 1-6, Boston, MA, June 1991.

R. Shoureshi, T. Knurek, D. Novotny, "Electrically Controlled Intelligent Vehicle

Mounting System," Proceedings of the 25th International Symposium on Automotive

Technology and Automation (ISATA) , Florence, Italy, June 1991.

R. Shoureshi, T. Knurek, S. Scott, R. Pritchett, "Intelligent and Optimal Design of Body-

Engine Mounts Using CAD Technology," Proceedings of the 25th International Symposium on Automotive Technology and Automation (ISATA), Florence, Italy, June

1991.

R. Shoureshi, V. VanDoren, "An On-Line Parameter Estimation Technique for

Intermittent Systems," ASME paper #90-WA/DSC-26, November 1990.

R. Shoureshi, M. Momot, "Dynamic Error Recovery for an Automated Assembly

Workcell," ASME publication No. G00544, pp. 43-47, November 1990.

37

R. Shoureshi, N. Kubota and G.R. Batta, "A Modern Control Approach to Active Noise

Control," ASME publication No. G00550, pp. 167-175, November 1990.

R. Shoureshi, K. Rahmani, V. VanDoren, "Intelligent Building Control Systems," NSF

Workshop on Intelligent Structures, pp. 196-215, Taipei, Taiwan, July 1990.

R. Shoureshi, G.R. Batta, "Three-Dimensional Active Noise Control Using a Direct

Feedback Approach," Proceedings of the American Control Conference, pp. 2111-2113,

May 1990.

R. Shoureshi, "Learning and Decision-Making for Intelligent Control Systems,"

Proceedings of the American Control Conference, pp. 985-987, May 1990.

R. Shoureshi, R. Chu, "Neural Space Representation of Dynamical Systems," ASME

publication No. H00549, pp. 63-68, December 1989.

R. Shoureshi, K. Rahmani, "Intelligent Control of Building Systems," ASME publications

No. H00549, pp. 7-15, December 1989.

R. Chu, R. Shoureshi and M. Tenorio "Neural Networks for System Identification,"

Proceedings of the 1989 American Control Conference, pp. 916-921,

1989.

S. Bouchillon, R. Shoureshi, "Optimal Tuning of Adaptive Hydraulic Engine Mounts,"

Proceedings of the SAE Biannual Conference on Noise and Vibration, pp. 363-370, May

1989.

R. Shoureshi and J. Wagner, "Observer Designs for Diagnostics of Nonlinear Processes

and Systems," ASME paper #88-WA/DSC-5, November 1988.

F. Pourki and R. Shoureshi, "Stability of a Class of Distributed Parameter Systems with

Applications to MPD Thrusters," ASME Publication #G00462, pp. 189-194, November

1988.

R. Shoureshi, D. Swedes, and R. Evans, "Learning Control for Autonomous Machines,"

ASME Paper No. 88-WA/DSC-29, November 1988.

R. Shoureshi and J. Sorlie, "Eulerian Bond Graphs of Thermofluid Processes," ASME

Publication #G00460, pp. 33-40, November 1988.

F. Pourki and R. Shoureshi, "A Lyapunov Approach to Finite Order Control for

Stabilization of Distributed Parameter Systems," ASME Publication #G00462, pp. 45-50,

November 1988.

R. Evans and R. Shoureshi, "Interfacing and Control of GE-P50 Industrial Robot Using

Microcomputer," ASME Publication #G00463, pp. 445-456, November 1988.

38

R. Shoureshi, "Microprocessor-Based Data Acquisition and Control Systems,"

Proceedings of the IFAC Symposium on Trends in Control and Measurement, Swansea,

U.K., July 1988.

R. Shoureshi, F. Pourki, "Microprocessors for Measurement and Control," presented at

the American Control Conference (ACC-1988), June 1988.

R. Shoureshi, P.L. Graf, S. Bouchillon, T. Knurek, R.W. Stevens, "Open-Loop Versus

Closed-Loop Control for Hydraulic Engine Mounts," SAE Paper #880075,

1988.

P.L. Graf, Shoureshi, J. Starkey, D. Novtony, R.W. Stevens, "Active Frame Vibration Control for Automotive Vehicles with Hydraulic Engine Mounts," SAE Paper #880074,

1988.

R. Shoureshi, P. Brown, R. Evans, W. Stevenson, "An Optically Driven Learning Control

for Industrial Manipulators," Proceedings of the American Control Conference (ACC-

1988), pp. 614-619, 1988.

R. Shoureshi, M. D. Roesler, "Robust Control for Manipulators with Uncertain

Dynamics." Proceedings of the 10th World Congress of International Federation of

Automatic Control (IFAC),Vol. 88, pp. 358-363, Munich, Germany, July 1987.

R. Shoureshi, F. Pourki, "Controllability Analysis of Nonlinear Distributed Parameter

Systems," Proceedings of the American Control Conference (ACC-1987), pp. 880-886,

Minneapolis, MN, June 1987.

P.L. Graf, R. Shoureshi, "Gain-Sensitivity Augmentation for Near-Optimal Control of

Parameter-Dependent Plants," Proceedings of the American Control Conference (ACC-

1987),pp. 520-526, Minneapolis, MN, June 1987.

G. Batta, R. Shoureshi, "Adaptive Active Sound Attenuation in Ducts," presented at the

American Control Conference (ACC-1987), June 1987.

J. Wagner, R. Shoureshi, "A Robust Failure Diagnostic Scheme for Nonlinear

Thermofluid Processes," Proceedings of the American Control Conference (ACC-1987),

pp. 1877-1883, Minneapolis, MN, June 1987.

R. Shoureshi, T. Laudeman, M. Momot, "Expert Control System," presented at the

American Control Conference (ACC-1987), June 1987.

D.L. Mattern, R. Shoureshi, "Model Reference Adaptive Control - A Perspective,"

Proceedings of the American Control Conference (ACC-1987), pp. 201-207,

Minneapolis, MN, June 1987.

F. Pourki, R. Shoureshi, "Observability of Heat Transfer of MPD Thruster Electrodes,"

AIAA paper #87-1070, presented at the 19th AIAA/DGLR/JSASS International Electric

Propulsion Conference, May 1987.

39

R. Shoureshi, F. Pourki, S.N.B. Murthy, "An Approach to MPD Engine Instabilities,"

AIAA paper #87-0384, 1987.

P.L Graf, R. Shoureshi, R.W. Stevens, T.L. Houston, "On Implementation of Adaptive

Hydraulic Mounts," SAE paper #870634, 1987.

P.L. Graf, R. Shoureshi, "Modeling and Implementation of Semi-Active Hydraulic

Engine Mounts," ASME Paper 87-WA/DSC-28, 1987.

R. Shoureshi, R. Mitchell, R. Cipra, "Vision-Based Intelligent Control for Automated

Assembly," ASME publication #G00382, pp. 9-19, 1987.

R. Shoureshi, D. Carey, "Analytical and Experimental Evaluation of Electroacoustic

Transducers," ASME Paper 86-WA/DSC-9, December 1986.

J. Wagner, R. Shoureshi, "Observer Design and Failure Detection of Heat Pumps,"

ASME Paper 86-WA/DSC-11, December 1986.

J. Dohner, R. Shoureshi, R. Bernhard, "Dynamic Modeling of 3-Dimensional Sound

Propagation," ASME Paper 86-WA/NCA-18, December 1986.

R. Shoureshi, "Expert Systems and Their Applications," ASME Paper 86-WA/DSC-10,

December 1986.

R. Shoureshi, M. Roesler, M. Corless, "Control of Industrial Manipulators with Bounded

Uncertainties," Japan-U.S.A. Proceedings of the Symposium on Flexible Automation, pp.

61-68. Osaka, Japan, July 14-18, 1986.

R. Shoureshi, R. Hoskin, "Failure Detection and Isolation Using System Structure

Knowledge and Eigenvalue Sensitivity," Proceedings of the American Control

Conference, pp. 1933-1938, Seattle, WA, June 18-20, 1986.

R. Shoureshi, P. L. Graf, T. L. Houston, "Adaptive Hydraulic Engine Mounts," SAE

paper #860549, February 1986.

R. Shoureshi, K. McLaughlin, "Extended Linear Observer for a Nonlinear Thermofluid

System," ASME Publication # 85-G00320, pp. 169-274, November 1985.

R. Shoureshi, D. Carey, "Modeling and Control of Automatic Vehicle Steering System

Using Microprocessors," Proceedings of the 1985 IFAC/IFORS Conference on Control

Science and Technology for Development, pp. 1156-1167, Beijing, China, August 1985.

R. Shoureshi, K. McLaughlin, "Microprocessor-Based Failure Detection of Heat Pumps,"

Proceedings of the 1985 IFAC/IFORS Conference on Control Science and Technology

for Development, pp. 1188-1199, Beijing, China, August 1985.

40

R. Shoureshi, K. McLaughlin, "Application of Bond Graph to Thermofluid Processes and

Systems," Proceedings of the 1985 American Control Conference, pp. 595-600, Boston,

MA, June 1985.

H.M. Paynter, R. Shoureshi, "An Introduction to the Dynamics and Control of

Thermofluid Processes and Systems," Proceedings of the Symposium on the Dynamics

and Control of Thermofluid Processes and Systems, pp. 1-4, ASME Winter Annual

Meeting, New Orleans, December 1984.

R. Shoureshi and K. McLaughlin, "Observer Design for Dynamics, Control and Failure

Detection of Heat Pumps," Proceedings of the Symposium on the Dynamics and Control

of Thermofluid Processes and Systems, pp. 13-18, ASME Winter Annual Meeting, New

Orleans, December 1984.

R. Shoureshi, K. McLaughlin, "Modeling and Dynamics of Two-Phase Flow Heat

Exchangers Using Temperature-Entropy Bond Graphs," Proceedings of the American

Control Conference, pp. 93-98, San Diego, June 1984.

R. Shoureshi, "Dynamic Analysis and Failure Detection of HVAC Systems Using

Temperature-Entropy Bond Graphs," Invited paper for the American Society of Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE) Workshop on "HVAC Control

Modeling and Simulation," Paper #17, pp. 1-23 of Proceedings, Atlanta, Georgia, Feb. 2-

3, 1984.

R. Shoureshi, H. M. Paynter, "Simple Models for Dynamics and Control of Heat-

Exchangers," Proceedings of the American Control Conference (ACC-1983), pp. 1294-

1298, June 1983.

R. Shoureshi, K. McLaughlin, "Temperature-Entropy Bond Graph for Dynamics and

Control of Heat-Exchangers," Proceedings of the American Control Conference (ACC-

1983), pp. 1299-1304, June 1983.

R. Shoureshi, "General Method for Optimization of Stirling Engines," Proceedings of the

17th Intersociety Energy Conversion Engineering Conference, pp. 1688-1693, August

1982.

R. Shoureshi, "Simple Models for Analysis and Design of Practical Stirling Engines,"

Proceedings of the 17th Intersociety Energy Conversion Engineering Conference, pp. 1647-1652, August 1982.

R. Shoureshi, H. M. Paynter, J. L. Smith, Jr., "Low Temperature Stirling Engines for

Waste Heat Recovery," Proceedings of the 17th Intersociety Energy Conversion

Engineering Conference, pp. 1716-1721, August 1982.

XIII. Academic Activities

i. New York Institute of Technology

41

Provost and Vice President for Academic Affairs (2011 – Present)

Twenty Direct Reports from Campuses in New York and six other

countries

Chair several university committees

ii. University of Denver

Dean, School of Engineering and Computer Science (2003 – 2011)

Member of Academic Deans Council (2003 – 2011)

Member of Graduate Council (2003 – 2011)

Member of Undergraduate Council (2003 – 2011)

Member of Task Force for Development of an Aging Institute (2009 –

2011)

Member of the Provost Teaching Task Force (2006 – 2007)

Member of the Provost Scholarship Task Force (2006 – 2007)

Chair, Search Committee, Dean of the Korbel School of International

Studies (2009 – 2010)

Chair, Search Committee, Dean of the Daniels College of Business (2007

– 2008)

Member of the Provost search committee (2005 – 2006)

Member of the Dean Search Committee, Daniels College of Business

(2004 – 2005)

iii. Colorado School of Mines

Member of University Tenure & Promotion Committee

Member, CSM Presidential Search Committee

Chair, Faculty search for Power Electronics

Co-Chair of the search committee for Paden Distinguished Chair Professor

Publicized Engineering Systems graduate program at both national and

international functions

Engineering Graduate Committee

- Established a new "Engineering Colloquium Series" with Industrial

Speakers

- Chaired graduate committee and established policies and

procedures for Engineering Systems’ graduate program and

designed new forms for graduate studies. - Handled electronic inquiries of graduate student applications - Assisted in organizing doctoral qualifying exams

42

- Continued introduction of the concept and through my networks

invited highly ranked representatives from industry, national labs,

and government agencies to serve on the Engineering Corporate

Advisory Board (CAB).

Mentor for several junior faculty.

Hosted several industry and government visitors for potential

research collaborations with CSM.

Participated in several new faculty interview process

Formulated several cross-disciplinary projects within CSM

Participated and contributed to undergraduate curriculum reform

effort

Chairman of the CSM Academy, a school committee composed of

all CSM distinguished professors, appointed by the President and Vice

President, and devoted to define long-range plans or the future of

CSM.

Introduced and developed, monitoring and diagnostic concepts in

several courses, including EGGN 488, EGGN 588, MEL III, and

MACS 440.

Through NSF CRCD grant has developed new experiments for

MEL II and III to emphasize diagnostics and condition monitoring.

Initiated activities, correspondences and bids for proposals to the

GM Education Program for offering video-courses to GM engineers.

This successful initiative lead to the inclusion of CSM among the GM

Distance Learning Institutions.

Liaison between CSM and University Sao Paulo, Brazil to

establish a joint program.

Chairman of Graduate Committee, Engineering Division, CSM

(1994-1997)

XIV. Visiting Scholars, Post Docs and Students Supervision

i. Visiting Scholars

1. Chris Aasted, Harvard Children Hospital, 2011- present

2. Meydad, Korngold, The Nuclear Research Center, Negeve, Israel, 2006-2007

3. Boaz Kofman, The Nuclear Research Center, Negev, Israel, 2004 4. Ofer Braunshtein, The Nuclear Research Center, Negev, Israel, 2004

43

5. Sun-Wook Lim, Ph.D., 2003-present

6. Eli Dolev, Ph.D., 2003

7. Henry Li, Ph.D., 2002

8. Benny Surousi, Ph.D., 2001-2002

9. Ali Meghdari, Ph.D., 1999-2000

10. Susan Mccaffery, Ph.D., 1998-1999

11. Guilherme Nelson, Brazilian Electric Power, Research Council, CEPEL 1993-

1994. 12. Li Ping, Chinese Electric Power Research, 1992-1994. 13. Luiz A. Cardoso, Instituto de Pesquisas da Marinha, Brazil, 1994.

ii. Graduated Students, Their Research Topics and Graduation Dates

a. Graduated Ph.D. Students

1. Christopher Aasted, “Direct Brain Control of Artificial Limbs,” June 2013.

2. Virdi Permana, “Observability and Controllability of Nonlinear Large Scale

Thermal Systems,” June 2010.

3. Muneeb Chawala, “Adaptive Filtering for Ultra-High Speed Space Data

Acquisition,” August 2009.

4. Sun-Wook Lim, “Senory Guided Control of a Mobile Diagnostic Unit for ACSR

Transmission Lines,” Aug. 2003.

5. Amir Chaghajerdi, “Design and Control of Distributed Vibro-Acoustic

Actuators,” Dec. 2002.

6. Tormod Fretheim, “Fault Detection and Nonlinear Output Observer Design Using

Neural Network Models” Dec. 2000.

7. Zhi Hu, “Neuro-Fuzzy Short-Term Load Forecast and Generation Control in

Electric Power Systems,” August 2000.

8. Hanchu Li, “Neural-Based Power Generation Control for Transient Loads,”

December, 1997.

9. Mark Bell, “Combined Feedforward and Feedback Active Vibration Control for

Civil Structures,” Dec. 1997.

10. Goldino Alves, “Piezo-Based Active Adaptive Noise Control for Interior of

Automotive Vehicles,” Dec. 1997.

11. Matthew Wheeler, "Intelligent Control for Electric Power Generation Systems,"

May 1994.

12. Larry Brackney, "Active Noise Control of Jet Engines," December 1994.

44

13. S. Reynold Chu, "Neural Networks for System Identification and State

Observation of Dynamical Systems," August, 1992.

14. Michael Momot, "Intelligent Control for Automated Assembly Cell," May, 1992.

15. Karim Rahmani, "Expert Control Systems for Intelligent Buildings," August,

1992.

16. Paul Torcellini, "Expert Systems for Optimum Operation of Building Systems,"

December, 1992.

17. Vance VanDoren, "The ILS Parameter Estimation Technique for Intermittent

Systems with Applications to Intelligent Building Control," October, 1990.

18. George Batta, "Real-Time Adaptive Active Control of Sound Fields," September,

1990.

19. John Wagner, "Observability and Controllability of Nonlinear Processes with

Applications in Failure Detection," May, 1989.

20. Forouza Pourki, "Stabilization and Control Analysis of Distributed Parameter

Systems," Dec. 1988.

21. Peter Graf, "Electronically Controlled Adaptive Engine Mounts," August, 1987.

22. Jeffrey Dohner, "Controllability and Dynamic Modeling of Three-Dimensional

Noise Propagation," August, 1987.

23. Duane Mattern, "Model Reference Adaptive Control of Power Plants," May,

1987.

b. Graduated M.S. Students with Thesis

24. Tracy Schantz, “Feature-Based Neuro-Symbolic Networks for Global

Diagnostics,” June 2012.

25. Susan Muller, “Control Design for an Adaptive Cast,” June 2010.

26. Faisal Kamal, “Design of Solar Powered Systems for Green Buildings,” August

2008.

27. Marvan Eslami, “Design of Wind Turbines for Desert Applications,” December

2008.

28. Mio Jang, “Energy Harvesting from Kinetic Motion,” December 2008.

29. Chis Aasted, “Optical Non-Invasive Brain Imaging,” Dec. 2007

45

30. Eric Hansen, “Wireless Telemetric Knee,” Dec. 2004

31. Tim Norick, “Intelligent Substation,” Jan. 2004

32. Virdi Permana, “Optimal Control of Combined Heat and Power Systems”, Nov.,

2003.

33. Kim Anderson, “Sensory Augmentation for Diabetic Patients,” May 2003.

34. David Mach, “Design Enhancements for Knee Implants,” Dec. 2002.

35. Neil Flock, “Enhancement of Voice Activated System Using Smart Larynex,”

May 2003.

36. Cody O’neil, “Signature Analysis for Health Assessment of Transmission Lines,”

Dec. 2002.

37. Dan Flaherty, “Intelligent Control of Highly Varying Loads,” May 2003.

38. Robert Woods, “Optical-Based Sensor for Diagnostics of Transformers,” Dec.

2003.

39. Mark Dace, “Design of a Telemetric Patella,” Dec. 2001.

40. Kwok-man Wong, “Semi-Active Structural Vibration Control,” Dec. 2001

41. Benjamin Hoffner,”Optimal Load Dispatch in the Presence of HVL,” Dec. 2001.

42. Todd Langer, “Design of a Mobile Fluoroscopic Unit,” Dec. 2001.

43. William Hodges, “EMAT-Based Diagnostics for ACSR Transmission Lines,”

Dec. 2000.

44. Tim Romig, “Fuzzy Controller for Diabetic Sensory Augmentation,” May 2000.

45. Xianghue Wang, “Optical-Fiber Monitor for Health Assessment of High Voltage

Transformers,” Dec. 1999.

46. Brumley, Jamey, “Dynamic Modeling of Spine Motion With and Without

Implants,” Dec. 1999.

47. Benjamin Terry, “Intelligent Diagnosis for Remote Monitoring,” Aug. 1999.

48. Andy Ottele, “Hopfeild-Based Neuro-Diagnostics for Substation Equipment”,

Aug. 1998.

49. Brenda Jacobs, “Distributed Control for Substation Diagnostic,” Aug. 1998.

46

50. Mike Chenoweth, “Health Assessment of Electrical Grid Ground Risers,” May

1998.

51. Douglas Cook, “Optimal Dispatch for Electric Power Generation,” May 1998.

52. Bruce DeRoo, “Co-located Sensor/Actuator for Active Noise Control Using

Piezo Ceramics,” May 1997.

53. Ray Hemlic, “Neural-Based Control of Turbo-machinery,” Aug. 1997.

54. Josef Dvorak, “Neural-Based Diagnostics of Transformers,” May 1997.

55. Chad Fisher, “Optical Communications in Substations,” May 1997.

56. Susan Henderson, “Light Absorption Spectroscopy for Diagnostics of Oil-Filed

Transformers,” Dec. 1997.

57. David High, "Neural-Based Control of Multiple Robots for Automated

Assembly," December 1994.

58. Stephenie Goerges, "Fuzzy Control and Diagnostics of Complex Mechanical

Systems," December 1995.

59. Cavit, Kubali, "Intelligent Assembly System," December 1993.

60. Jeffrey Edwards, "Neural-Based Vision Processing for Automated Fixturing and

Assembly," December 1993.

61. Rachelle Lojovich, "Neural Network Implementation of Optimal Controllers,"

December 1993.

62. Michael Priebe, "Self-Tuning Regulator for High, Precision Machining Using

Electrohydraulic Stepper Motors," August 1993.

63. David Swedes, "Knowledge-Based Learning Control for Automated Assembly,"

December 1990.

64. Raj Deol, "One-Line Auto-Tuning of Adaptive Engine Mounts," December, 1990.

65. Noriyuki Kubota, "Self-tuning Regulator for Active Noise Cancellation,"

December 1990.

66. Barbara Dubrovin, "Design of the Active Adaptive Assembly Table," MSME,

August, 1990.

67. Laura Stallard, "Model Based Expert System for Failure Detection and

Identification of Household Refrigerators," August, 1989.

47

68. Jeff Wolfert, "Learning Scheme for On-Line Modeling of Flexible Systems,"

October, 1989.

69. Scott Bouchillon, "Actuator Design and Control Synthesis for Adaptive Engine

Mounts," May, 1989.

70. Paul Brown, "Optical Learning Control for Industrial Manipulators," MSME,

May, 1988.

71. Jim Sorlie, "Bond Graph for Thermofluid Systems," MSME, May, 1988.

72. Michael Momot, "Control of Manipulators with Uncertainties," MSME, May,

1987.

73. Candace Suriano, "Data Acquisitions for Vibration Control Systems," MSME,

December, 1986.

74. Jesse Jones, "Microprocessor-Based Controller for HVAC Systems," MSME,

May, 1986.

75. David Carey, "Dynamic Modeling and Control Design of Passive and Active

Electro-magneto-Acoustic Transducers," MSME, February, 1986.

76. Maribeth Roesler, "Feedback Control of Nonlinear Uncertain Dynamic Systems

with Applications to Industrial Manipulators," MSME, February, 1986.

77. Robert Hoskin, "A New Approach to Failure Detection and Isolation with

Applications to Aircraft Engines," MSME, December, 1985.

78. Ronald Perez, "Microprocessor-Based Adaptive Control for Active Attenuation of

Sound in Duct Flows," MSME, December, 1985.

79. Kevin McLaughlin, "Temperature-Entropy Band Graphs for Dynamics and

Control of Refrigerators," MSME, February, 1985.

80. Teresa Laudeman, "Machine Learning for Intelligent Manufacturing Systems,"

MSME, August, 1985.

81. Celeste Chippero, “Automotive NVH Design,” December, 1985

82. John Hibner, “Active Automotive Engine Mounts,” May, 1985.

iii. Current Students Performing Research, Topics and Expected Graduation Dates

83. Ma Lu, “Human Interface for Direct Brain Control of Objects,” to be completed in

June 2015.

iv. B.S. Students (Senior Projects)

48

84. Carolyn S. Mattick, "Neural-Based Image Processing," May 1994.

85. Stephanie L. Goerges, "Computer-Aided Optimal Vehicle Suspension Design,"

December 1993.

86. Mark P. Schoenegge, "Automated Fixturing Using Vision Feedback," August 1993.

87. Sarah Guggemos, "Occupancy Patterns Using Motion Sensors," May 1993.

88. Scott Huth, "Adaptive Flexible Fixturing," December 1992.

89. Robert Harris, "Optical-Based 3-D Object Identification," December 1992.

90. Kirt Chapman, "Optical Tactile Sensor for Object Recognition," December 1992.

91. Jin Won Lee, "Modeling of Steam Power Plants," May 1992.

92. Michael Flaherty, "Control of Hydro-Pneumatic Actuators," May 1991.

93. Ken Lazzaro, "Analysis of Boiler Systems," May 1991.

94. Byran Schueler, "Modeling of HVAC Equipment," May 1991.

95. John Sergo, "Modeling of Electric Power Systems," December 1990.

96. Robert Casey, "Design and Construction of a Three Finger Gripper," December,

1988.

97. Carmen Crum, "Analysis and Design of a Robotic Gripper," December, 1988.

98. David Swedes, Jr., "Actuator Design for Adaptive Engine Mounts," May, 1988.

99. Ronald Mason, "Control of Variable Expansion Valve," May, 1986.

100. Nader Motamedi, "Control of HVAC Systems," May, 1986.

XV. External Activities

A. Consulting Activities

2001 - 2008: Nisource Energy Technology, Inc.

2001 - 2005: Bismark State College

1991 – 2011: Hill Rom Corporation

49

1994-2000: Chief Technical Advisor, Cooper-Standard Automotives.

1990- 1992: GenCorp, working on process control of fiber reinforced composites in

SMC production line, and active noise cancellation in factory environment.

1986-1994: Consultant for Cooper Industrial Products, working on development of a

CAD based optimal design of vehicle mounting system.

1991- 1992: Jet Propulsion Laboratory, Cal Tech, working on the development of space

autonomous vehicles.

1990: Johnson Controls Inc., worked on diagnostics for rotating machinery.

1986-1988: Kohler Company, worked on modeling and stability analysis of a speed

governor for portable generators. A mathematical model describing transient behavior of

the controlled system was derived and analyzed.

1987-1989: Teledyne Ryan Electronics Incorporated, worked on fiber optic sensor

system for aircraft engines manufactured by Allison Gas Turbine.

1982-1983: Ford Motor Company, Representative of Mechanical Engineering

Department of Wayne State University for developing a retraining program and a new

interdisciplinary master program for Ford engineers, entitled "Electronics and Computer Control Systems".

1981-1982: Mystersky Power Plant, performed failure diagnostics on high-pressure

turbine.