2
Bio Protein Treatment N 1 Shake, measure and pour treatment into a bowl Apply treatment evenly, staying ¼ inch / .6 cm away from the scalp. Blow-dry 100% using a brush. Section hair into 4 sections. Flat iron 1/8 -inch / .3-cm sub-sections, following the guide. Comb to remove excess treatment. Allow treatment to absorb for 20-50 minutes depending on curl and texture. Clarify hair twice with Keratin Cure Clarifying Shampoo. Section hair into 4 sections. Blow-dry hair 80% . 5 2 6 3 4 7 8 9 Usage amounts of the product: Based on long, shoulder length hair we suggest starting with 30ml/1oz of product and adding accord- ingly based on hair type and porosity. Please use professional judgement as overusage and under usage is not encouraged. Overusage of product will result in sticky hair, making it hard to comb and blowdry, which will not give you proper treatment results. *** Due to the glycolic nature of our product, you may have some color shifting in hair color. This results in a lighter tone and mostly effects red and dark shades. Please note that if color shifts, you can immediately use toner, demi or semi permanent color after treatment. Flat iron temperature and passes: • THIN/FINE/ -start iron at 380F/185C, 7-9 passes with the iron. • DAMAGED/ HI-LIFT HAIR- start iron at 350F/170C, 7-9 passes with the iron • NORMAL HAIR-400F/200C, 7-9 passes with the iron • THICK/CURLY/TEXTURED • HAIR-420F/210C 7-10 passes with the iron. After flat ironing is done, rinse hair throughly with water and apply Deep masque for 5 minutes. Rinse masque throughly and client is done. 10

Bio Protein Treatment · 2019. 9. 12. · Our treatment is a cohesive smoothing, repairing and rejuvenating treatment. Keratin Cure’s products are not single minded, they can see

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Bio Protein Treatment · 2019. 9. 12. · Our treatment is a cohesive smoothing, repairing and rejuvenating treatment. Keratin Cure’s products are not single minded, they can see

BioProtein Treatment

N

1 Shake, measure and pour treatment into a bowl

Apply treatment evenly,staying ¼ inch / .6 cm away from the scalp.

Blow-dry 100% using a brush. Section hair into 4 sections.

Flat iron 1/8 -inch /.3-cm sub-sections, following the guide.

Comb to remove excess treatment.

Allow treatment toabsorb for 20-50 minutes depending on curl and texture.

Clarify hair twice withKeratin Cure Clarifying Shampoo.

Section hair into 4 sections.

Blow-dry hair 80%.

5

2

6

3

4

7 8 9

N

Usage amounts of the product:Based on long, shoulder length hair we suggest starting with 30ml/1oz of product and adding accord-ingly based on hair type and porosity. Please use professional judgement as overusage and under usage is not encouraged. Overusage of product will result in sticky hair, making it hard to comb and blowdry, which will not give you proper treatment results.

*** Due to the glycolic nature of our product, you may have some color shifting in hair color. This results in a lighter tone and mostly effects red and dark shades. Please note that if color shifts, you can immediately use toner, demi or semi permanent color after treatment.

Flat iron temperature and passes:• THIN/FINE/ -start iron at 380F/185C, 7-9 passes with the iron.• DAMAGED/ HI-LIFT HAIR- start iron at 350F/170C, 7-9 passes with the iron• NORMAL HAIR-400F/200C,7-9 passes with the iron• THICK/CURLY/TEXTURED• HAIR-420F/210C 7-10 passes with the iron.

After flat ironing is done, rinsehair throughly with water and apply Deep masque for 5 minutes.Rinse masque throughly and client is done.

10

Page 2: Bio Protein Treatment · 2019. 9. 12. · Our treatment is a cohesive smoothing, repairing and rejuvenating treatment. Keratin Cure’s products are not single minded, they can see

Our technology and ingredients are leading edge. Our ELIXYCURE formulation uses a combination of glycolic and fruit acids, Biotin, Keratin Proteins, essential oils and peptides. Our BoNT-L Peptides have the ability to fill the porosity and adhere to the cuticle. We don’t use, out dated technology and unwanted ingredients like: Formaldehyde, Parabens, phthalates, harsh chemicals, sodium chlorides and sulfates…Our ELIXYCURE and Glycolic technology requires no wait time and are used in all of our products. Our treatment is same-day ready to go.We have created different types of formulations to suit each stylists needs. You can achieve amazing results and control your treatment results.

BIO: Glycolic based leave in formulation.CURE-LOCKS: Glycolic Based wash out formulation.THE ONE CURE SMOOTHING SHAMPOO: Glycolic based smoothing shampoo.

They are a smoothing and restoring treatment. Our treatment is a cohesive smoothing, repairing and rejuvenating treatment. Keratin Cure’s products are not single minded, they can see the whole picture and provide dramatic results for all hair types.Keratin Cure Gold & Honey can be used with any other chemical process as it works to help smooth and repair damage. It can be used alternately with chemical relaxers to reduce damage and achieve better result especially with fragile or kinky hair.

WHAT MAKES OUR SMOOTHING TREATMENT DIFFERENT

is an innovative Glycolic based Formaldehyde Free Smoothing Treatment that Repairs, Rebuilds, Rejuvenates and Smooths hair with the latest ingredients and technology. Who’s it for? Our treatment is for everyone. Keratin is no longer about straightening and only for curly hair. Keratin Cure Gold and Honey Bio Treatment is for all hair types as it helps to smooth, eliminate frizz, repair and rebuild all hair types. Who doesn’t want smooth, shiny and healthy hair. How it works? Our exclusive glycolic, keratin, and peptide based LEAVE IN formulation is combined with organic therapeutic oils, that are designed to penetrate deep into the hairs cortex to deliver and replenish nutrients, keratin and protein and sealing them into the cuticle. This process delivers amazing reparative and smoothing results to all hair.

Keratin Cure Gold & Honey Bio Protein Treatment