Thank you for purchasing our music stands!We hope you enjoy using our stands, enhancing your image, and making transport easier.

But first - please use this guide to help you set up your stands “out of the box”. Assem

bly guide1

Firstly, check you have the correct number of stands and tops - if you have ordered stand graphics from us we will have already applied them to the stands.

When you take the stands out of the bag, or box, they will have a ‘spring’ to them - they will have already been pre-folded on our presses, so they will easily fold to shape.Stand upright behind the stand, and fold the sides of the stand in towards you, as shown in the diagram - a good trick is to use your feet to keep the stand square prior to fitting the top.

Now you have the stand in position, you can fit the stand top.Just ‘click’ up the music base of the top, and slide the top onto the base by matching up the slots on both parts, the 2 locator tabs on the base should now pop through the top, making the stand strong, square, and ready to use.

Enjoy - and play well!

2

3

4

BigBandStands.comTel: +44 (0)1446 713301Email: info@bigbandstands.comRocket House, Llwyn Y Gog, Rhoose Point, Barry. CF62 3LS UK